Browse wiki
Jump to navigation
Jump to search
The following information was received via … The following information was received via facsimile:</br>The device is a product fill level gauge that was on a line that was being disassembled and cleared out. (Proctor & Gamble) P&G had told the contractor to leave the part of the line with the gauge until Industrial Dynamics (their consultant for radioactive materials) had a chance to remove the device from the package line. However, the device was not removed and the line was sent off for disposal.</br>The device was physically removed from the site on or about May 28, 2009. The Licensee discovered the (device to be missing) on June 9, 2009. The disposed-of material was sent to DH Griffin (a scrap yard) in Greensboro, NC. DH Griffin has been contacted and they are in the process of sorting and searching for the device. They say there is a good chance that the device is still at the scrap yard as the material received from P&G should be in one of two piles still at the yard.</br>(The State of North Carolina) asked P&G if they needed any assistance and (P&G) said no, at this time.</br>The device is an Industrial Dynamics FT-50 Filtec device used to measure the fill level of liquid products. The source is an Am-241, 100 mCi source. Gauge S/N: 110585, Source S/N: 3770. The source was leak tested in Sept. 2006 and it was not leaking at that time.</br>The North Carolina Incident number is NC-09-25.</br>* * * UPDATE FROM HENRY BARNES TO DONALD NORWOOD ON 06/10/2009 AT 1307 EDT * * *</br>D.H. Griffin contacted P&G (at) 10:15 am. They informed P&G that they had located the Filtec unit on site. (An employee of P&G) drove to the D.H. Griffin site (and) verified that it was their Filtec unit. The unit is now isolated on a pallet and secured in a warehouse at D.H. Griffin. P&G is in contact with their Industrial Dynamics regional resource to arrange to have the source removed. They will keep (the State) informed as to the progress on the removal of the unit.</br>THIS MATERIAL EVENT CONTAINS A "LESS THAN CAT 3" LEVEL OF RADIOACTIVE MATERIAL</br>Sources that are "Less than IAEA Category 3 sources," are either sources that are very unlikely to cause permanent injury to individuals or contain a very small amount of radioactive material that would not cause any permanent injury. Some of these sources, such as moisture density gauges or thickness gauges that are Category 4, the amount of unshielded radioactive material, if not safely managed or securely protected, could possibly - although it is unlikely - temporarily injure someone who handled it or were otherwise in contact with it, or who were close to it for a period of many weeks.</br>This source is not amongst those sources or devices identified by the IAEA Code of Conduct for the Safety & Security of Radioactive Sources to be of concern from a radiological standpoint. Therefore is it being categorized as a less than Category 3 sourceal standpoint. Therefore is it being categorized as a less than Category 3 source
04:00:00, 9 June 2009 +
45,120 +
09:54:00, 10 June 2009 +
04:00:00, 9 June 2009 +
The following information was received via … The following information was received via facsimile:</br>The device is a product fill level gauge that was on a line that was being disassembled and cleared out. (Proctor & Gamble) P&G had told the contractor to leave the part of the line with the gauge until Industrial Dynamics (their consultant for radioactive materials) had a chance to remove the device from the package line. However, the device was not removed and the line was sent off for disposal.</br>The device was physically removed from the site on or about May 28, 2009. The Licensee discovered the (device to be missing) on June 9, 2009. The disposed-of material was sent to DH Griffin (a scrap yard) in Greensboro, NC. DH Griffin has been contacted and they are in the process of sorting and searching for the device. They say there is a good chance that the device is still at the scrap yard as the material received from P&G should be in one of two piles still at the yard.</br>(The State of North Carolina) asked P&G if they needed any assistance and (P&G) said no, at this time.</br>The device is an Industrial Dynamics FT-50 Filtec device used to measure the fill level of liquid products. The source is an Am-241, 100 mCi source. Gauge S/N: 110585, Source S/N: 3770. The source was leak tested in Sept. 2006 and it was not leaking at that time.</br>The North Carolina Incident number is NC-09-25.</br>* * * UPDATE FROM HENRY BARNES TO DONALD NORWOOD ON 06/10/2009 AT 1307 EDT * * *</br>D.H. Griffin contacted P&G (at) 10:15 am. They informed P&G that they had located the Filtec unit on site. (An employee of P&G) drove to the D.H. Griffin site (and) verified that it was their Filtec unit. The unit is now isolated on a pallet and secured in a warehouse at D.H. Griffin. P&G is in contact with their Industrial Dynamics regional resource to arrange to have the source removed. They will keep (the State) informed as to the progress on the removal of the unit.</br>THIS MATERIAL EVENT CONTAINS A "LESS THAN CAT 3" LEVEL OF RADIOACTIVE MATERIAL</br>Sources that are "Less than IAEA Category 3 sources," are either sources that are very unlikely to cause permanent injury to individuals or contain a very small amount of radioactive material that would not cause any permanent injury. Some of these sources, such as moisture density gauges or thickness gauges that are Category 4, the amount of unshielded radioactive material, if not safely managed or securely protected, could possibly - although it is unlikely - temporarily injure someone who handled it or were otherwise in contact with it, or who were close to it for a period of many weeks.</br>This source is not amongst those sources or devices identified by the IAEA Code of Conduct for the Safety & Security of Radioactive Sources to be of concern from a radiological standpoint. Therefore is it being categorized as a less than Category 3 sourceal standpoint. Therefore is it being categorized as a less than Category 3 source
Has query"Has query" is a predefined property that represents meta information (in form of a <a rel="nofollow" class="external text" href="https://www.semantic-mediawiki.org/wiki/Subobject">subobject</a>) about individual queries and is provided by <a rel="nofollow" class="external text" href="https://www.semantic-mediawiki.org/wiki/Help:Special_properties">Semantic MediaWiki</a>.
00:00:00, 10 June 2009 +
041-0464-0G +
Modification date"Modification date" is a predefined property that corresponds to the date of the last modification of a subject and is provided by <a rel="nofollow" class="external text" href="https://www.semantic-mediawiki.org/wiki/Help:Special_properties">Semantic MediaWiki</a>.
22:32:17, 24 September 2017 +
09:54:00, 10 June 2009 +
1.246 d (29.9 hours, 0.178 weeks, 0.041 months) +
04:00:00, 9 June 2009 +
URL"URL" is a <a href="/Special:Types/URL" title="Special:Types/URL">type</a> and predefined property provided by <a rel="nofollow" class="external text" href="https://www.semantic-mediawiki.org/wiki/Help:Special_properties">Semantic MediaWiki</a> to represent URI/URL values.