ML24010A098

Fuel Facilities Construction Inspection Program Jan 11 2024 Public Meeting Final

ML24010A098
Person / Time
Issue date:	01/11/2024
From:	Nicole Coovert NRC/RGN-II
To:
References
Download: ML24010A098 (1)

Text

Fuel Facilities Construction Inspection Program and Budget/Fees Discussion

Public Meeting (Obser vation Category)

January 11, 2024, 1:00PM - 5:00PM ET

1 Opening Remarks

2 Agenda

• Open Remarks

• Purpose

• Use of Oversight Processes Inspection Manual Chapter (IMC) 2600 Verses IMC 2694 for New Construction and Modifications

• IMC 2694 and 2600 Updates

• Inspection Procedures (IP) 88200 - 88202 Updates and Examples

• Fuel Facility Budget and Fee Discussion

• Closing Remarks

3 Purpose of Meeting

• NRC staff to provide additional granularity to internal and external stakeholders with respect to the IMC and IP revisions for construction and major modification activities that are projected to occur in the near-ter m, and to discuss the industry proposals related to the budget and fee process for fuel facilities.

• Today s presentation will provide draft language revisions, along with discussion on concepts for IMC 2600, IMC 2694, and IP 88200 -88202 revisions. Note: These are still in -draft and are not meant to convey a final regulatory position.

• After each agenda section, the public is afforded an opportunity to ask questions and/or provide comments.

4 Use of Oversight Processes IMC 2600 Verses IMC 2694 for New Construction and Modifications

5 IMC 2600 Fuel Cycle Facility Operational Safety and Safeguards Inspection Program (Concept)

• To be used for existing licensees.

• Depending on the scope and complexity of a licensees modifications (e. g. including higher material category levels, new technologies, new accident sequences, etc.), plant modification IPs guidance will use a risk-informed inspection strategy approach to determine inspection hours for modifications. This approach could result in lower or higher inspection hours for modifications.

• Core inspection hours are established in IMC 2600 App B. However, inspection scope of the large and complex modifications that the industry is proposing were not specifically considered and addressed in IMC 2600.

6 IMC 2600 Fuel Cycle Facility Operational Safety and Safeguards Inspection Program (Concept)

• In the past, major modification inspections used a combination of operating core and construction procedures. These revisions provide additional guidance for clarity, transparency, and consistency.

• Inspectors will utilize new construction IPs (88200 - 88202 series) for technical and management measures (MM) inspections, as applicable, during construction phase and existing operating core IPs during operational readiness review (ORR) inspections, as applicable.

7 IMC 2600 Appendix B NRC Core Inspection Requirements DRAFT LANGUAGE

8 Defining Major Modifications for Existing Licensees (Concept)

• Purpose - to establish process gates that are predictable and repeatable in our decision-making process, along with being transparent to all stakeholders.

• The trigger for a "major modification" is when the facility is making a s u bsta nt i a l change in their structures, systems, and components that require a license amendment. Not all license amendments affect major changes to a facility such that a major modification inspection is needed.

• If these modification activities are performed within the licensees current license (without the need for an amendment), using the core inspection hours effort and program flexibilities should be adequate to verify reasonable assurance of adequate protection.

9 Examples Considered as Major Modifications (Concept)

• Construction of new, permanent, buildings that will house and operate substantially new processes, technologies, or control systems for which the licensee has no prior experience, that requires a license amendment.

o For example: An increase of Category for special nuclear material allowed to be possessed and used by the current license and/or the creation of a new process line that will utilize the increased Category of material, for which the licensee has no prior experience.

• Substantially expanded current process capabilities, including the physical expansion of the facility via substantial construction activities, that requires a license amendment.

10 Examples Considered as N OT Major Modifications (Concept)

• License amendment required for an increase of processing uranium percentage weight, without a change in Category of material, but does not represent a substantial facility or process change.

• Substantially expanded current process capabilities, including the physical expansion of the facility via substantial construction activities, that does not require a license amendment.

11 IMC 2600 Appendix B: NRC Core Inspection Requirements Tables 1 and 2 (Proposed Revisions in Red)

12 Graded Approach to Modification Inspections (Concept)

Modification inspection options in IMC 2600 When to Use IP Nominal Hours Criteria for use Status Quo (Lower core Annual Core Inspections w/o large inspection range hours) modifications under 70.72 88070 30 (Annual) Core inspection

Status Quo (Higher core Annual Core Inspections with large inspection range hours) modifications under 70.72 88070 Up to 90 (Annual) Core inspection 100 - 400 When major Major Modification Substantial safety significant modification requiring a license amendment (LA) 88070per year of modification modification occurring requires LA (Triennial)

Triennial Modification Triennial review for cumulative affects of modifications 88072 Up to 90Core inspection

Relevant paragraphs in IMC 2600 In addition, the need may arise for specific inspections to address major evolutions limited to one or a few licensees, such as adding new process lines or changing the assay of material processed in a facility. The 07.05 need for these inspections will also be assessed on a case-by -case basis, and they can be conducted under the guidance of a TI or by using existing IPs in a customized inspection plan as Supplemental Inspections.

07.08 Inspections for the startup of new or modified facilities are handled on a case-by -case basis through the implementation of a project-specific inspection plan or IMC.

13 IMC 2694, Fuel Cycle Facility Construction and Pre -Operational Readiness Review Inspection Program (Concept)

• To be used for new applicants and new licensees.

• Inspection scope is determined on a case-by-case basis using a principal inspection plan (PIP) and is facility and process-line specific.

• Inspectors will utilize new construction IPs (88200 - 88202 series) for technical and MM inspections, as applicable, during construction phase and existing operating baseline IPs during ORR inspections.

14 IMC 2694 Appendix A CURRENT

15 IMC 2694 Appendix A DRAFT LANGUAGE

16 IMC 2694 Appendix A DRAFT LANGUAGE

17 Public Participation

At this time, the public is afforded an opportunity to ask questions and/or provide comments.

18 IMC 2694 and 2600 Updates

Examples of Concepts/Revisions

Please note that these are still in -draft and are not meant to convey a final regulatory position.

19 Changes to Both IMC 2600 and IMC 2694

IMC Section 04 Definitions At-Risk Construction DRAFT LANGUAGE The commencement of construction (as defined by 10 CFR 70.4) prior to the Director of the Office of Nuclear Material Safety and Safeguards (or his/her designee) issues the approved license application or amendment.

IMC Section 11 Conducting Inspections DRAFT LANGUAGE At-risk construction inspections are intended to verify that the applicant or licensee is constructing in accordance with the proposed design with a priority given to, but not limited to, work that the staff can only verify during construction. Inspections do not constitute an approval of the design or the application.

20 Changes to Both IMC 2600 and IMC 2694

IMC Section 04 Definitions At -Risk Open Items DRAFT LANGUAGE During at-risk construction activities, an open item is an inspection tracking mechanism for a discrepancy identified between the as-built condition and the license application, [license amendment request for existing licensees] environmental report, Integrated Safety Analysis (ISA)

Summary, or other design basis document that supports the licensing review being performed. The discrepancy, if left unresolved, may result in a potential failure to meet a future regulatory requirement, self-imposed standard, condition of a license, or commitment.

21 Changes to Both IMC 2600 and IMC 2694

IMC Section 11 Conducting Inspections DRAFT LANGUAGE

• At-Risk construction open items will be documented in publicly available inspection reports for transparency to internal and external stakeholders. Report wording could state T he NRC obser ved a discrepancy between the license application/amendment request and the as-built configuration and is being tracked as an Open Item XXXX.

The inspector could provide a concise description of the specific discrepancy identified to ensure transparency and support future inspection for closure of open items.

22 Changes to Both IMC 2600 and IMC 2694

IMC Section 11 Conducting Inspections DRAFT LANGUAGE

• Each open item will be considered on a case-by-case basis. Open items may necessitate further inspection to close, either during construction or during an ORR prior to NRC authorization allowing a licensee to process special nuclear materials related to a licensee application or amendment.

• Open items could be resolved in multiple ways, including but not limited to:

physically rework the as -built condition to match the future licensing requirements; revise/update licensing requirements; and/or utilize the configuration management program to change the design, justify as -built use-as-is configurations, etc.

23 Definitions Specific in IMC 2694

IMC Section 04 Definitions Safety Significant Items (and Services)

DRAFT LANGUAGE Structures, systems, equipment, components, and activities of licensee personnel and its consultants, contractors, and suppliers, as designated by the ISA or equivalent, (e. g. items relied on for safety (IROFS)) that either prevent potential accident sequences or mitigates the consequences to an acceptable level, or as necessary to meet licensing commitments, or regulatory requirements, such as 10 CFR 70.64 facilities, as applicable.

24 Public Participation

At this time, the public is afforded an opportunity to ask questions and/or provide comments.

25 IPs 88200 - 88202 Updates and Examples

Examples of Concepts/Revisions

Please note that these are still in -draft and are not meant to convey a final regulatory position.

26 Existing Construction IPs Need Revision (Concept)

• IPs referenced in IMC 2694 (current version):

Existing IPs 881XX were written for a Part 70 Category I plutonium processing plant, with technical and quality assurance (QA) requirements that are not applicable to current Part 70 facilities that are being constructed or modified.

Existing IPs will remain available for future similar construction projects, as applicable.

• New IPs developed based upon non-power production or utilization facilities (NPUF) (IP 69020 -69022)

Revised construction IPs will be agile, scalable, and flexible, and incorporate lessons learned from other NRC construction oversight processes.

Eva l u a t e same construction attributes (structural, welding, electrical, etc.) thru different appendices.

Same approach is done for MM/QA elements.

27 Modification/ Construction Inspection Procedures

NOTE: Above chart is a sample of construction attributes.

28 IP 88200 Inspections of Safety Significant Items (and Ser vices) During Construction of Fuel Cycle Facilities (Technical)

Examples of Concepts/Revisions

Please note that these are still in -draft and are not meant to convey a final regulatory position.

29 IP 88200 Appendices DRAFT LANGUAGE Appendix A: Foundations and Buildings Appendix B: Structural Concrete Appendix C: Structural Steel and Supports Appendix D: Piping Systems Appendix E: Pipe Support and Restraints Appendix F: Mechanical Components Appendix G: Electrical Cable Appendix H: Electrical Components and Systems Appendix I: Ventilation and Confinement Systems Appendix J: Instrumentation and Control Systems Appendix K: Structural Welding Appendix L: Nuclear Welding Appendix M: Fire Protection Systems Appendix N: Inspection of Digital Instrumentation and Control System/Software Design

30 IP 88200-02 Inspection Requirements DRAFT LANGUAGE

NOTE: This IP requirements and guidance is written to be scalable, depending on the extent of the construction or modification project.

As a result, not all appendices and/or sections in appendices will apply to every project. Recommended inspection scope and hours will depend on the PIP for new facility construction in accordance with IMC 2694, Fuel Cycle Facility Construction and Pre -Operational Readiness Review Inspection Program, Additionally, this IP can be used to provide additional technical inspection guidance for plant modification inspections, on a case-by-case basis, and in accordance with IMC 2600, Appendix B, NRC Core Inspection Requirements.

31 Appendix A: Foundations and Buildings 88200.A-01 Inspection Objectives DRAFT LANGUAGE 01.01 To determine whether foundation work and related management measure activities for safety significant structures at fuel cycle facilities (FCF) are being performed in accordance with regulatory requirements, the licensing basis, specifications, drawings, and work procedures.

01.02 To determine whether the applicant/licensees system for preparing, reviewing, and maintaining records relative to safety significant foundation and building activities, as applicable, is functioning properly, and to determine whether the records reflect work accomplishment consistent with specifications and procedures.

01.03 To verify the as-built condition safety significant structures meet the specified design requirements, specifications, and drawings. For installation of concrete structures, also refer to Appendix B of this IP.

01.04 To determine that the implementation of the MMs related to work activities for safety significant foundations and buildings is effective and to verify that deviations from requirements are appropriately resolved.

NOTE: Inspection Objectives are consistent across technical appendices.

32 Appendix A: Foundations and Buildings 88200.A-02 Inspection Requirements DRAFT LANGUAGE 02.01 For the safety significant structure(s) selected for inspection, determine whether appropriate and adequate procedures in the following areas are compatible with the MMs program, if applicable, and prescribe adequate methods to meet the specifications, where applicable: (specific attributes) 02.02 Determine whether the applicant/licensee has an established audit program (including plans, procedures, and audit schedule) for assessing the adequacy of work control functions and requirements, as applicable in their licensing basis, in the area of geotechnical/foundation activities, and for ensuring that examination, inspection, and if required, test personnel associated with performing tests and inspections of geotechnical/ foundation activities are qualified and/or certified to perform their assigned work.

NOTE: Inspection Requirements are consistent across technical appendices.

33 Appendix A: Foundations and Buildings 88200.A-02 Inspection Requirements DRAFT LANGUAGE

02.03 Ascertain whether the following geotechnical/foundation activities, as required by licensing commitments and applicable building codes, are being controlled and accomplished in accordance with the requirements of the documents reviewed in 02.01, above: (specific attributes) 02.04 Review the documentation generated for the safety significant geotechnical/foundation activities. Determine whether the applicant/licensee/contractor system for documenting safety significant work is functioning properly. Records should be complete, reviewed by quality control, engineering personnel, or designee, as required, and readily retrievable.

NOTE: Inspection Requirements are consistent across technical appendices.

34 Appendix A: Foundations and Buildings 88200.A-0 3 Inspection Guidance (Concept)

• General Guidance provides inspector good practices and is consistent across all appendices.

• Specific Guidance provides inspection guidance for each of the four Inspection Requirements, and incudes guidance specific to each of the appendices (e. g. civil/structural, mechanical, electrical, etc.)

• All inspection guidance and applicable inspection requirements are defined as as applicable, if required, etc.

35 Appendix A: Foundations and Buildings 88200.A-04 Resource Estimate DRAFT LANGUAGE

The appendices, or sections of the appendices, and inspection samples and hours, applicable to a specific facility, will be determined and documented in the PIP for that facility. Inspection preparation, including review of licensing basis, ISA, applicable codes and standards, and MM procedure review, all as applicable, is not included in this estimate.

NOTE: Resource Estimate section is consistent across technical appendices.

36 Appendix A: Foundations and Buildings 88200.A-05 Procedure Completion DRAFT LANGUAGE This inspection procedure is complete when the applicable appendices or applicable appendix sections are completed for the facility, as determined by the PIP. Inspectors are not expected to complete every activity in the appendices of this IP. Instead, inspectors should prioritize inspection activities based on 1) importance of the activity to safety, 2) availability of the on-site activity at the time of the inspection, and 3) available inspection resources. An appendix to this IP need not be completed if there are no IROFS or safety significant items (or services) covered by that appendix at an FCF.

NOTE: Procedure Completion section is consistent across technical appendices.

37 Inspection Example: Safety-Significant Structures

• Inspections use IP 88200 Appendix A: Foundations and Buildings; Appendix B: Structural Concrete; and Appendix C: Structural Steel and Supports, as applicable.

• For in-process inspections, vertical slice inspection of applicable MM use IP 88201 and applicable appendices. For example, configuration management program ensures design changes do not impact the safety function and license requirements for structures and internal components to withstand NPH.

38 Public Participation

At this time, the public is afforded an opportunity to ask questions and/or provide comments.

39 IP 88201 Inspections of Management Measures During Construction of Fuel Cycle Facilities

Examples of Concepts/Revisions

Please note that these are still in -draft and are not meant to convey a final regulatory position.

40 IP 88201 Appendices DRAFT LANGUAGE

Appendix A: Configuration Management (CM)

Appendix B: Maintenance Appendix C: Training and Qualification Appendix D: Procedures Appendix E: Audits and Assessments Appendix F: Incident Investigations Appendix G: Records Management Appendix H: Other QA Elements (1-18) (as applicable)

41 Three Phases of Management Measures Inspections (Concept)

1. Initial Team Inspection/Program Review (in most cases, this inspection is for new applicants/new licensees only)

2. Vertical slice during in-process construction inspections (focused on construction applicable MMs)

3. ORR / Readiness Reviews (focused on operational applicable MMs, e. g. administrative IROFS, etc.)

42 Initial Team Inspection/Program Review DRAFT LANGUAGE

It is recommended that an initial team inspection be conducted to review the MMs implementing documents within the first six months after construction has begun. This inspection should cover MMs implementing document requirements for all applicable appendices to this IP. During this initial team inspection, if sufficient activities have been conducted or are in-progress, an inspection of the implementation of MMs could be conducted in specific areas. Any samples completed during the initial team inspection can be credited toward the total sampling requirements for the applicable appendix.

43 Vertical Slice During In-Process Construction Inspections DRAFT LANGUAGE After the initial team inspection, periodic inspections of the effective application of MMs will be performed in conjunction with the inspection of the construction of safety significant items (and services) in accordance with IP 88200. The goal is to cover all applicable MMs implementation described in the appendices to this IP during the first year of construction. However, this might not be practical based on the type and amount of construction activities completed during the first year (e. g., no unusual events may have occurred to complete the MMs implementation inspections described in Appendix F, Incident Investigations ).

44 Appendix C - Training and Qualifications 88201.C-01 Inspection Objectives DRAFT LANGUAGE

01.01. To determine if the applicant s or licensees training and qualifications program adequately establishes and is implementing measures to ensure that all personnel who perform activities associated with IROFS are trained and tested so as to provide reasonable assurance that they understand, recognize the importance of, and are qualified to perform these activities in a manner that adequately protects public health and safety and the environment.

01.02. To determine if the applicant s or licensees training and qualifications program is adequately coordinated and integrated with other management measures.

NOTE: Inspection Objectives for MM appendices are unique due to the specific attributes, however each appendices verifies a program in place and is adequately coordinated and integrated.

45 Appendix C - Training and Qualifications 88201.C-02 Inspection Requirements DRAFT LANGUAGE

02.01 Training and Qualifications Program

• Review relevant sections of the applicant s or licensees ISA. Determine if appropriate measures have been established for the training and qualifications of personnel who perform activities associated with IROFS.

• Determine if any changes the applicant or licensee has made to the training program are in compliance with any requirements and/or licensee commitments.

• Determine if the applicant s or licensees training program maintains established, written procedures as required by the license application.

46 Appendix C - Training and Qualifications 88201.C-02 Inspection Requirements DRAFT LANGUAGE 02.02 Program Implementation.

• Determine that the applicant or licensee is in compliance with license requirements relating to the implementation of the training program.

• Verify that training for administrative controls IROFS are implemented per 10 CFR 70.62 (d) to ensure that IROFS are available and reliable.

02.03 Training Obser vations.

• Determine if training classes and/or teaching aids are conducted in accordance with application or license requirements and procedural requirements.

02.04 Changes in Examinations

• Determine if changes to training examinations, if applicable, are in accordance with the license application.

47 Appendix C - Training and Qualifications 88201.C-0 3 Inspection Guidance (Concept)

• General Guidance provides inspector good practices and is consistent across all appendices.

• Specific Guidance provides inspection guidance for each of the Inspection Requirements, and incudes guidance specific to each of the appendices (e. g. configuration management, procedures, audits, etc.)

• All inspection guidance and applicable inspection requirements are defined as as applicable, if required, etc.

48 Appendix C - Training and Qualifications 88201.C-04 & C.05 DRAFT LANGUAGE 88201.C-04 Resource Estimate The resource estimate for completing this appendix is dependent on the specific facility and will be as determined in the PIP for the facility.

88201.C-05 Procedure Completion Procedure completion is dependent on the specific facility and will be as determined in the PIP for the facility.

NOTE: Resource Estimate and Procedure Completion sections are consistent across MM appendices.

49 Appendix H - Other Quality Assurance Elements

Appendix H offers inspection guidance for 18 additional QA elements, as applicable to the applicant/licensee, based upon the commitments in their licensing basis documents.

88201.H-01 Inspection Objectives DRAFT LANGUAGE 01.01 To determine if the applicant or licensee has adequately established and is implementing appropriate QA elements to IROFS as described in the ISA.

01.02 To determine if the applicant s or licensees QA elements are adequately coordinated and integrated with other management measures.

88201.H 02 Inspection Requirements (Concept - Requirements based upon the individual attributes, and as required by license application.)

02.01 Organization 02.05 Instructions, Procedures, and Drawings 02.02 Quality Assurance Program 02.06 Document Control 02.03 Design Control 02.07 - 02.18 02.04 Procurement Document Control

50 Inspection Example: Safety-Significant Mechanical Components with a MM Vertical Slice

• Inspections may use: IP 88200 Appendix D: Piping Systems; Appendix E:

Pipe Support and Restraints; Appendix F: Mechanical Components; and/or Appendix I: Ventilation and Confinement Systems to inspect technical aspect.

• Fo r i n-process inspections, vertical slice inspection of applicable MM use IP 88201 and applicable appendices. For example, the records program may demonstrate purchase order information demonstrates component manufactured will withstand specific pressure, temperature, chemical interactions, etc. for the IROFS to perform its safety function.

51 Public Participation

At this time, the public is afforded an opportunity to ask questions and/or provide comments.

52 IP 88202 Inspections of Operational Readiness During Construction of Fuel Cycle Facilities

Examples of Concepts

Please note that these are still in -draft and are not meant to convey a final regulatory position.

53 ORR/Readiness Reviews (Concept)

• IP 88202 is being developed and modeled from similar NPUF inspection procedures to provide ORR inspection guidance that is consistent and transparent for all applicants and licensees that are required to conduct an ORR as part of a regulatory requirements or license condition.

• IP 88202 will directly reference operational IPs (e. g. IP 88020, etc.) which allows for more transparent fee-billing.

54 ORR/Readiness Reviews (Concept)

• ORR inspections will include, but not limited to:

- safety significant items (and ser vices) such as IROFS, and associated management measures with a focus on operational readiness to support safe processing of special nuclear material;

- IROFS samples may focus more specifically on administrative controls and/or IROFS that due to the nature of construction, were not previously inspected;

- Functional area programs, as applicable; and

- Licensees/applicant s resolutions/corrective actions associated with at-risk construction open items or other findings/violations identified during construction (as-applicable).

55 ORR/Readiness Reviews IMC Section 04 Definitions ORR/Readiness Reviews for IMC 2694 and 2600 DRAFT LANGUAGE

An assessment review inspection performed by a multi -disciplined inspection team to verify that a new facility, [a major modification to a previously approved facility] can be operated safely within the intended safety basis. In order to support a decision to allow operation of the facility, as applicable, the NRC will review and assess the state of readiness of facility operation based on the results of the ORR inspection.

56 Public Participation

At this time, the public is afforded an opportunity to ask questions and/or provide comments.

57 Fuel Facility Budget and Fee Discussion

58 58

• Summary of the May 2023 and November 2023 Fuel Facility Stakeholder Meeting discussions on the budget and fee processes

• Feedback on NEIs Letter to NRC, Industry Comments on How NRC Could Fund Shortfalls in the Fuel Cycle Business Line Budget

• Discussion of potential NRC and Industry actions to inform budget formulation

59 Public Participation

At this time, the public is afforded an opportunity to ask questions and/or provide comments.

60 Closing Remarks

61