ML23094A160
ML23094A160 | |
Person / Time | |
---|---|
Site: | Westinghouse |
Issue date: | 05/05/2023 |
From: | Lav S NRC/NMSS/DFM/FFLB |
To: | Westinghouse |
Shared Package | |
ML23094A157 | List: |
References | |
Download: ML23094A160 (1) | |
Text
NRC FORM 374 Page 1 of 6 U.S. NUCLEAR REGULATORY COMMISSION MATERIALS LICENSE Pursuant to the Atomic Energy Act of 1954, as amended, the Energy Reorganization Act of 1974 (Public Law 93-438), and Title 10, Code of Federal Regulations, Chapter I, Parts 30, 31, 32, 33, 34, 35, 36, 39, 40, and 70, and in reliance on statements and representations heretofore made by the licensee, a license is hereby issued authorizing the licensee to receive, acquire, possess, and transfer byproduct, source, and special nuclear material designated below; to use such material for the purpose(s) and at the place(s) designated below; to deliver or transfer such material to persons authorized to receive it in accordance with the regulations of the applicable Part(s). This license shall be deemed to contain the conditions specified in Section 183 of the Atomic Energy Act of 1954, as amended, and is subject to all applicable rules, regulations, and orders of the U.S. Nuclear Regulatory Commission now or hereafter in effect and to any conditions specified below.
Licensee
- 1. Westinghouse Electric Company, LLC 3. License Number: SNM-1107 Amendment 1
- 2. P.O. Box 355 4. Expiration Date: September 12, 2062 Pittsburgh, Pennsylvania 15230-0355 5. Docket No. 70-1151
- 6. Byproduct Source, and/or 7. Chemical and/or Physical 8. Maximum amount that the Licensee Special Nuclear Material Form may possess at any one time under this License A. U-233 A. Any chemical or A. [Security-Related physical form, limited Information - Withheld to laboratory use as Under 10 CFR 2.390]
individual 1-gram maximum quantities in ventilated hoods, glove boxes, or other enclosures B. U-235 in uranium of B. Any chemical or B. [Security-Related any enrichment physical form Information - Withheld Under 10 CFR 2.390]
C. Uranium enriched C. Any chemical or C. [Security-Related to 5 percent, physical form except Information - Withheld including any uranium metal Under 10 CFR 2.390]
daughter isotopes D. Pu-238/239 D. Sealed sources D. [Security-Related Information - Withheld Under 10 CFR 2.390]
Enclosure 3
NRC FORM 374A U.S. NUCLEAR REGULATORY COMMISSION Page2 of 6 License Number SNM-1107 MATERIALS LICENSE Docket or Reference Number SUPPLEMENTARY SHEET 70-1151 D. Transuranic elements E. Any E. [Security-Related and fission products Information - Withheld Under 10 CFR 2.390]
F. Natural (or depleted) F. Any chemical or physical F. [Security-Related Uranium form except metal Information - Withheld Under 10 CFR 2.390]
G. Deleted per amendment 1 to renewed license dated May 5, 2023 H. Byproduct Material H. Surface contamination on H. [Security-Related returned fuel assemblies, Information - Withheld fuel rods, equipment, and Under 10 CFR 2.390 associated miscellaneous components
- 9. Authorized place of use: The licensee's existing facilities at Columbia, South Carolina.
- 10. This license shall be deemed to contain two sections: Safety Conditions and Safeguards Conditions.
These sections are part of the license and the licensee is subject to compliance with all listed conditions in each section.
FOR THE U.S. NUCLEAR REGULATORY COMMISSION Signed by Lav, Samantha on 05/05/23 Date: See digital signature By: ______________________
Samantha C. Lav, Chief Fuel Facility Licensing Branch, Division of Fuel Management Office of Nuclear Material Safety and Safeguards
NRC FORM 374A U.S. NUCLEAR REGULATORY COMMISSION Page 3 of 6 License Number MATERIALS LICENSE SNM-1107 SUPPLEMENTARY SHEET Docket or Reference Number 70-1151 SAFETY CONDITIONS S-1 Authorized Use: For use in accordance with statements, representations, and conditions in the license application, dated September 20, 2021; or as revised, pursuant to Title 10 of the Code of Federal Regulations (10 CFR) 70.32 or 10 CFR 70.72.
S-2 The licensee shall maintain and execute the Site Emergency Plan for the Columbia Fuel Fabrication Facility, Revision 19, dated December 18, 2018, or as further revised by the licensee consistent with 10 CFR 70.32(i).
S-3 Removed.
S-4 Westinghouse may make changes to the license application without prior NRC approval provided the change meets the following provisions:
- The change does not decrease the effectiveness of the safety program commitments in the license application;
- The change does not result in a departure from the safety program evaluation methods described in the license application;
- The change satisfies the performance requirements of 10 CFR 70.61 (i.e., the change does not result in a degradation of safety);
- The change does not affect compliance with applicable regulatory requirements; and
- The change does not conflict with an existing license condition.
Records of such changes shall be maintained, including justification and management approval.
Within 6 months after each change is made, WEC shall submit the revisions to the LRA to the Director, Nuclear Material Safety and Safeguards, using an appropriate method listed in 10 CFR 70.5, with a copy to the appropriate NRC regional office.
S-5 Removed S-6 Removed S-7 Removed S-8 Removed S-9 Notwithstanding the requirements of 10 CFR Part 20.1703(c)(5), Westinghouse may use a licensed health care professional to determine the medical fitness of personnel at the Columbia Fuel Fabrication Facility to use respiratory protection equipment. The respiratory protection program must be designed by, and under the supervision of, a physician. Though the physician need not administer each determination personally, the physician is ultimately responsible for the fitness determination. The physician is to be involved in the supervision of the fitness program, the review of overall results, individual cases that fall outside certain predetermined parameters, and supervision of personnel performing the tests.
NRC FORM 374A U.S. NUCLEAR REGULATORY COMMISSION Page 4 of 6 License Number MATERIALS LICENSE SNM-1107 SUPPLEMENTARY SHEET Docket or Reference Number 70-1151 S-10 The increase in the possession limit, authorized by Amendment 18, is for the storage of UF6 cylinders.
S-11 The licensee is granted an exemption from the requirements of 10 CFR 30.3, and 10 CFR 70.3, pursuant to 10 CFR 30.11 and 10 CFR 70.11, to allow it to transfer, for disposal, specific waste material from a) the East Lagoon, b) the East Lagoon liner, c) soils excavated from below the liner, d) solid CaF2 sludge previously dredged from the Calcium Fluoride Lagoons on the site and placed in a storage pile (all of this material is known to contain <0.5 weight percent U-235) and e) UF6 cylinders previously used for shipping that have gone through an internal wash/rinse process following their last use and are internally contaminated with SNM to the US Ecology Idaho, Inc. (USEI) Resource Conservation and Recovery Act (RCRA) Subtitle C disposal facility near Grand View, Idaho as described in its submittals of May 8, 2020, September 22, 2020, October 12, 2020 and February 8, 2021.
S-12 The licensee is granted an exemption from 10 CFR 20, Appendix G, Section IIl.E. Under the exemption, WEC would not be required to report a low-activity radioactive material shipment (containing byproduct and special nuclear material) shipment which exceeded 20 days in accordance with 10 CFR 20, Appendix G, Section III.E unless a copy of the signed NRC Form 540 (or NRC Form 540A, if required) acknowledging receipt has not been received within 45 days of the shipment leaving the CFFF facility as described in its submittal dated June 1, 2021.
S-13 The licensee is granted an exemption from the requirements of 10 CFR 70.3 and 10 CFR 30.3, pursuant to 10 CFR 30.11 and 10 CFR 70.11, to allow it to transfer, for disposal, 133,000 ft3 of solid Calcium Fluoride waste material (all of this material is known to contain <0.5 weight percent U-235), to the US Ecology Idaho, Inc. (USEI) Resource Conservation and Recovery Act (RCRA) Subtitle C disposal facility near Grand View, Idaho as described in its submittal dated September 14, 2021.
S-14 The licensee is granted an exemption from the requirements of 10 CFR 70.3 and 10 CFR 30.3, pursuant to 10 CFR 30.11 and 10 CFR 70.11 to allow it to transfer volumetrically contaminated waste to include sludge contaminated with calcium fluoride dredged from site lagoons, sludge and liner from the site sanitary lagoon, contaminated soil and associated materials from under and adjacent to the sanitary lagoons, and contaminated soil and associated materials associated with planned calcium fluoride pad repairs, and surface-contaminated waste to include obsolete uranium fluoride cylinders and debris associated with the calcium fluoride pad and sanitary lagoon demolition activities to the US Ecology Idaho, Inc. (USEI) Resource Conservation and Recovery Act (RCRA) Subtitle C disposal facility near Grand View, Idaho for disposal as described in its submittal dated December 1, 2021 S-15 The licensee commits to comply with the provisions of Section C of Regulatory Guide 3.75, Corrective Action Programs for Fuel Cycle Facilities, Revision 0.
S-16 WEC shall enter into its Corrective Action Program (CAP) exceedances of Federal and State standards for the maximum contaminant levels (MCLs) under the U.S. Environmental Protection Agencys (EPAs)
National Primary Drinking Water Regulations
NRC FORM 374A U.S. NUCLEAR REGULATORY COMMISSION Page 5 of 6 License Number MATERIALS LICENSE SNM-1107 SUPPLEMENTARY SHEET Docket or Reference Number 70-1151 S-17 Westinghouse shall submit its environmental monitoring and sampling program (Section 10.1.4 the LRA) to the NRC for review and approval upon South Carolina Department of Health and Environmental Control approval of the Remedial Investigation Report, or within five years of the license renewal (whichever comes first);
S-18 Within 90 days of submittal of the CA final written report to SCDHEC, Westinghouse shall submit its environmental sampling and monitoring program (described in Section 10.1.4 of the LRA) to the NRC for review and approval.
S-19 The licensee shall not alter the current storage configuration or location of the nine 55-gallon drums containing Hematite ash in excess of 5.0 wt.% 235U for a period of six months, or upon completion of the Hematite ash campaign, as described in the NRCs license amendment approval letter dated 5 May 2023.
S-20 The licensee shall maintain at least 12 inches edge-to-edge spacing between the nine 55-gallon drums containing Hematite ash in excess of 5.0 wt.% 235U and all other fissionable material for a period of six months, or upon completion of the Hematite ash campaign, as described in the NRCs license amendment approval letter dated 5 May 2023.
SAFEGUARDS CONDITIONS SECTION 1.0 - MATERIAL CONTROL AND ACCOUNTING SG-1.1 The licensee shall follow its Fundamental Nuclear Material Control Plan for the Columbia Fuel Fabrication Facility, which has been revised as indicated by Revision 44, dated July 9, 2019.
Any further revision to this plan shall be made only in accordance with, and pursuant to, either the provisions of 10 CFR 70.32(c) or 70.34.
SG-1.2 Operations involving special nuclear material which are not referenced in the Plan identified in Condition SG-1.1 shall not be initiated until an appropriate safeguards plan has been approved by the U.S. Nuclear Regulatory Commission (NRC).
SG-1.3 Removed SG-1.4 Removed SG-1.5 Removed SG-1.6 Removed SG-1.7 Removed
NRC FORM 374A U.S. NUCLEAR REGULATORY COMMISSION Page 6 of 6 License Number MATERIALS LICENSE SNM-1107 SUPPLEMENTARY SHEET Docket or Reference Number 70-1151 SECTION 2.0 - PHYSICAL PROTECTION OF SNM OF LOW STRATEGIC SIGNIFICANCE SG-2.1 The licensee shall follow the physical protection plan entitled, Physical Security Plan, Revision 47, dated August 15, 2019, and as it may be further revised in accordance with the provisions of 10 CFR 70.32(e).
SECTION 3.0 - INTERNATIONAL SAFEGUARDS SG-3.1 The licensee shall follow all sub-codes within Codes 1 through 8 of the Transitional Facility Attachment No. 5A, dated 2021, to the US/IAEA SG Agreement, as implemented per 10 CFR Part
- 75. Any further revision to the Transitional Facility Attachment shall be made only in accordance with and pursuant to the provisions of 10 CFR 75.15.
SG-3.2 With respect to Transitional Facility Attachment Code 2.2:
Substantive changes to the information provided in the Design Information Questionnaire (DIQ) means those changes requiring amendment of the Transitional Facility Attachment. Such changes shall be provided by letter to the NRCs Office of Nuclear Material Safety and Safeguards in accordance with 10 CFR 75.10(c). Nonsubstantive changes to the information in the DIQ means those changes not requiring amendment of the Transitional Facility Attachment. Such changes shall be provided by Concise Note (on DOE/NRC Form 740M) at the time that modification is completed.
SG-3.3 Notwithstanding the requirements of 10 CFR 75.35(a) to submit Material Balance Reports on DOE/NRC Form 742, Physical Inventory Listings on DOE/NRC Form 742C and Concise Notes on DOE/NRC Form 740M, the licensee may submit the information specified in 10 CFR 75.35(a) electronically. The electronic submissions must be submitted in the format specified in NUREG/BR-0006 and BR-0007 unless otherwise excepted by license condition.
- via email NMSS/DFM OFFICE NMSS/DFM/FFLB NSIR/DSO/SOSB OGC/NLO
/CTCFB NAME JTobin JT JCurry JC CKreuzberger CK JPiotter JP DATE Apr 5, 2023 Apr 5, 2023 Apr 24, 2023 Apr 25, 2023 OFFICE NMSS/DFM/MCAB NRR*
NAME JRubenstone JR SLav SL DATE Apr 24, 2023 May 5, 2023