|
|---|
Category:License-Application for Facility Operating License (Amend/Renewal) DKT 50
MONTHYEARULNRC-06827, Supplement to License Amendment Request Regarding Support System Requirements for Residual Heat Removal and Control Room Air Conditioning Systems Under Technical Specifications 3.4.8, 3.7.11, and 3.9.6 (LDCN 22-0029)2023-11-20020 November 2023
Supplement to License Amendment Request Regarding Support System Requirements for Residual Heat Removal and Control Room Air Conditioning Systems Under Technical Specifications 3.4.8, 3.7.11, and 3.9.6 (LDCN 22-0029)
ML23215A1972023-08-0303 August 2023
Supplement to License Amendment and Exemption Request Regarding Use of Framatome Gaia Fuel (LDCN 22-0002)
ULNRC-06751, Attachment 4: List of Commitments2023-03-29029 March 2023
Attachment 4: List of Commitments
ML23088A1202023-03-29029 March 2023
Application to Revise Technical Specifications to Adopt TSTF-501-A, Rev. 1, Evaluation of the Proposed Change
ML23088A1192023-03-29029 March 2023
Application to Revise Technical Specifications to Adopt TSTF-501-A, Rev. 1, Relocate Stored Oil & Lube Oil Volume Values to Licensee Control
ML22335A5082022-12-0101 December 2022
License Amendment Request to Clarify Support System Requirements for the Residual Heat Removal System and Control Room Air Conditioning System Under Technical Specifications 3.4.8, 3.7.11, and 3.9.6 (LDCN 22-0029)
ULNRC-06780, Additional Supplement to License Amendment Request to Adopt TSTF-439 and TSTF-505, LDCN 20-0072022-11-30030 November 2022
Additional Supplement to License Amendment Request to Adopt TSTF-439 and TSTF-505, LDCN 20-007
ML22307A3142022-11-0303 November 2022
Attachment 2: Proposed Technical Specification 5.5.16 Changes (Markup)
ULNRC-06765, Evaluation of the Proposed Change2022-11-0303 November 2022
Evaluation of the Proposed Change
ML22307A3152022-11-0303 November 2022
Attachment 3: Proposed Technical Specification 5.5.16 Changes (Clean Pages)
ML22307A3132022-11-0303 November 2022
Attacchment 1: 54032-CALC-01, Revision 1,Callaway Plant: Evaluation of Risk Significance of Permanent ILRT Extension
ML22285A1192022-10-12012 October 2022
Attachment 2 to Enclosure 1: Revised Clean Technical Specifications
ULNRC-06768, Attachment 8 to Enclosure 1: ANP-3969NP, Callaway Non-LOCA Summary Report, Revision 2, Dated October 20222022-10-12012 October 2022
Attachment 8 to Enclosure 1: ANP-3969NP, Callaway Non-LOCA Summary Report, Revision 2, Dated October 2022
ML22285A1242022-10-12012 October 2022
Attachment 7 to Enclosure 1: ANP-3943NP, Callaway Small Break LOCA Analysis with Gaia Fuel Design, Revision 1, Dated October 2022
ML22285A1232022-10-12012 October 2022
Attachment 6 to Enclosure 1: ANP-3944NP, Callaway Realistic Large Break LOCA Analysis with Gaia Fuel Design, Revision 1, Dated October 2022
ML22285A1222022-10-12012 October 2022
Attachment 5 to Enclosure 1: ANP-3947NP, Callaway Unit 1 License Amendment Request Inputs for Use of Framatome Fuel, Revision 3, Dated October 2022
ML22285A1182022-10-12012 October 2022
Attachment 1 to Enclosure 1: Marked-Up Existing Technical Specifications
ML22285A1172022-10-12012 October 2022
Enclosure 1: Description and Assessment of the Proposed Change
ML22285A1202022-10-12012 October 2022
Attachment 3 to Enclosure 1: Marked-Up Technical Specifications Bases (for Information Only)
ML22285A1212022-10-0707 October 2022
Attachment 4 to Enclosure 1: Framatome Affidavits for Withholding from Public Disclosure
ULNRC-06723, Attachment 5 to Enclosure 1 - Criticality Safety Evaluation Report2022-08-29029 August 2022
Attachment 5 to Enclosure 1 - Criticality Safety Evaluation Report
ML22242A1242022-08-29029 August 2022
Enclosure 1: Description and Assessment of the Proposed Change
ML22242A1262022-08-29029 August 2022
Attachment 2 to Enclosure 1 - Revised Clean Technical Specifications
ML22242A1272022-08-29029 August 2022
Attachment 3 to Enclosure 1 - Marked-Up Technical Specification Bases
ML22242A1252022-08-29029 August 2022
Attachment 1 to Enclosure 1 - Marked-Up Existing Technical Specifications
ML22216A2412022-08-0404 August 2022
Application to Revise Technical Specifications to Adopt TSTF 577, Revised Frequencies for Steam Generator Tube Inspections (LDCN 21-0013) - Description and Assessment
ML22181B1392022-06-30030 June 2022
Attachment 9 - Responses to NRC Audit Questions
ML22242A1282022-06-30030 June 2022
Attachment 4 to Enclosure 1 - Holtec Affidavit for Withholding
ML22181B1382022-06-30030 June 2022
Attachment 8 - Revised Operating License Changes
ML22181B1372022-06-30030 June 2022
Attachment 7 - Proposed Operating License Changes (Mark-up)
ML22181B1312022-06-30030 June 2022
Attachment 1 - Replacement for Attachment 1, Description and Assessment, of ULNRC-06688
ML22181B1352022-06-30030 June 2022
Attachment 5 - Replacement for Attachment 5, Cross-Reference of TSTF-505 and Callaway Technical Specifications, of ULNRC-06688
ML22153A1762022-06-0202 June 2022
Enclosure 1 - Description and Assessment of the Proposed Change
ML22153A1752022-06-0202 June 2022
ULNRC-06729: Application for Technical Specification Change and Exemption Request Regarding Transition to Framatome Fuel, LDCN 22-0002
ML22153A1812022-06-0202 June 2022
Attachment 5 - Non-Proprietary Version of Licensing Summary Report
ML22039A3192022-02-0808 February 2022
Enclosure 1: Callaway Plant - Description of the Proposed Changes
ML22027A8072022-01-27027 January 2022
Enclosure 2: Callaway, Unit 1, License Amendment Request for Risk-Informed Approach to Resolution of Generic Letter 2004-02
ULNRC-06690, Enclosure 5: Callaway, Unit 1, LAR Supplement to Address Audit Discussion Points Summarized in NRC Letter Dated September 14, 2021 (ML21238A138)2022-01-27027 January 2022
Enclosure 5: Callaway, Unit 1, LAR Supplement to Address Audit Discussion Points Summarized in NRC Letter Dated September 14, 2021 (ML21238A138)
ML21335A4532021-12-0101 December 2021
Enclosure 1: Full Scope Implementation of Alternative Source Term - Evaluation of Proposed Changes
ML21335A4522021-12-0101 December 2021
Supplement to License Amendment Request for Adoption of Alternative Source Term and Revision of Technical Specifications
ML21328A1842021-11-24024 November 2021
Supplement to License Amendment Request to Adopt TSTF-439 and TSTF-505, LDCN 20-0007
ML21294A4042021-10-21021 October 2021
Enclosure 4 - Information Supporting Justification of Excluding Sources of Risk Not Addressed by the PRA Models
ML21294A4102021-10-21021 October 2021
Enclosure 10 - Program Implementation
ML21294A4112021-10-21021 October 2021
Enclosure 11 - Monitoring Program
ML21294A4122021-10-21021 October 2021
Enclosure 12 - Risk Management Action Examples
ML21294A4092021-10-21021 October 2021
Enclosure 9 - Key Assumptions and Sources of Uncertainty
ML21294A4082021-10-21021 October 2021
Enclosure 8 - Attributes of the Real Time Risk Model
ML21294A4072021-10-21021 October 2021
Enclosure 7 - PRA Model Update Process
ML21294A4062021-10-21021 October 2021
Enclosure 6 - Justification of Application of At-Power PRA Models to Shutdown Modes
ML21294A4032021-10-21021 October 2021
Enclosure 3 - Information Supporting Technical Adequacy of PRA Models Without PRA Standards Endorsed by Regulatory Guide 1.200, Revision 2
2023-08-03
[Table view] |
Text
Attachment 8 to ULNRC-06739 Revised Operating License Changes
ATTACHMENT 8
License Amendment Request
Callaway Unit No. 1 Renewed Facility Operating License NPF-30 NRC Docket No. 50-483
Post-Audit Supplement to License Amendment Request to Adopt TSTF-439 And TSTF-505
Revised Operating License Changes
This Attachment contains 6 pages.
associated supports; and the results of non-PRA evaluations that are based on a screening of other external hazards updated using the external hazard screening significance process identified in American Society of Mechanical Engineers (ASME)/American Nuclear Society (ANS) PRA Standard RA-Sa-2009; as specified in License Amendment No. 226 dated December 29, 2021. Prior NRC approval, under 10 CFR 50.90, is required for a change to the categorization process specified above (e.g., change from a seismic margins approach to a seismic probabilistic risk assessment approach).
(20) Adoption of Risk Informed Completion Times TSTF-505, Revision 2, Provide Risk-Informed Extended Completion Times -RITSTF Initiative 4b
Ameren Missouri is approved to implement TSTF-505, Revision 2, modifying the Technical Specification requirements related to Completion Times (CTs) for Required Actions to provide the option to calculate a longer, risk-informed CT (RICT). The methodology for using the new Risk-Informed Completion Time Program is described in NEI 06-09-A, Risk-Informed Technical Specifications Initiative 4b, Risk-Managed Technical Specifications (RMTS) Guidelines.
Ameren Missouri will complete the implementation item identified in Attachments 1 and 9 of Ameren Missouri letter ULNRC-06739, "Post-Audit Supplement to License Amendment Request to Adopt TSTF-439 and TSTF-505 (LDCN 20-0007)," dated June 30, 2022, prior to implementation of the RICT program (i.e., prior to implementing License Amendment ___).
D. An Exemption from certain requirements of Appendix J to 10 CFR Part 50, are described in the October 9, 1984 staff letter. This exemption is authorized by law and will not endanger life or property or the common defense and security and are otherwise in the public interest. Therefore, this exemption is hereby granted pursuant to 10 CFR 50.12. With the granting of this exemption the facility will operate, to the extent authorized herein, in conformity with the application, as amended, the provisions of the Act, and the rules and regulations of the Commission.
E. UE shall fully implement and maintain in effect all provisions of the Commission-approved physical security, training and qualification, and safeguards contingency plans including amendments made pursuant to provisions of the Miscellaneous Amendments and Search Requirements revisions to 10 CFR 73.55 (51 FR 27817 and 27822) and to the authority of 10 CFR 50.90 and 10 CFR 50.54(p). The combined set of plans, which contain Safeguards Information protected under 10 CFR 10 CFR 73.21, are entitled: Callaway Security Plan, Training and Qualification Plan, and Safeguards Contingency Plan, Revision 0 submitted by letter dated October 20, 2004, as supplemented by the letter May 11, 2006.
UE shall fully implement and maintain in effect all provisions of the Commission-approved cyber security plan (CSP), including changes made pursuant to the Renewed License No. NPF-30 Amendment No. 226 authority of 10 CFR 50.90 and 10 CFR 50.54(p). The Callaway Plant Unit 1 CSP was approved by License Amendment No. 203, as supplemented by changes approved per License Amendment No. 214.
F. Deleted per Amendment No. 169.
G. UE shall have and maintain financial protection of such type and in such amounts as the Commission shall require in accordance with Section 170 of the Atomic Energy Act of 1954, as amended, to cover public liability claims.
H. This renewed license is effective as of the date of issuance and shall expire at Midnight on October 18, 2044.
Renewed License No. NPF-30 Amendment No. 226 FOR THE NUCLEAR REGULATORY COMMISSION
/RA/
William M. Dean, Director Office of Nuclear Reactor Regulations
Attachments/Appendices:
- 1. Attachment 1 (Deleted per Amendment No. 169)
- 2. Attachment 2 (Deleted per Amendment No. 169)
- 3. Appendix A - Technical Specifications (NUREG-1058, Revision 1)
- 4. Appendix B - Environmental Protection Plan
- 5. Appendix C - Additional Conditions
Date of Issuance: March 6, 2015
Renewed License No. NPF-30 Amendment No. 226 ATTACHMENT 1
Deleted per Amendment No. 169.
Renewed License No. NPF-30 Amendment No. 226
- 14 -
ATTACHMENT 2
Deleted per Amendment No. 169.
Renewed License No. NPF-30 Amendment No. 226
