ML20215E973

From kanterella
Jump to navigation Jump to search
Forwards Case Study Rept - Effects of Ambient Temp on Electronic Components in Safety-Related Instrumentation & Control Sys. W/O Encl
ML20215E973
Person / Time
Issue date: 12/05/1986
From: Heltemes C
NRC OFFICE FOR ANALYSIS & EVALUATION OF OPERATIONAL DATA (AEOD)
To: Van Brunt E
ARIZONA PUBLIC SERVICE CO. (FORMERLY ARIZONA NUCLEAR
References
AEOD-C604, NUDOCS 8612230192
Download: ML20215E973 (2)


Text

"

.O December 5, 1986 AE0D/C604 Mr. E. E. Van Brunt, Jr.

Executive Vice President Project Director Arizona Nuclear Power Project P.O. Box 52034 Phoenix, Arizona 85072-2034

Dear Mr. Van Brunt,

Jr.:

Subject:

Case Study Report--Effects of Ambient Temperature on Electronic Components in Safety-Related Instrumentation and Control Systems The Office for Analysis and Evaluation of Operational Data (AE00) has finalized its case study on the effects of ambient temperature on electronic components in safety-related instrumentation and control systems.

The final report addresses the peer review comments provided by NRR, IE, the Regions, INP0, NSAC, Westinghouse Electric Corporation and Duke Power Company. The final report also includes the analysis and evaluation of three additional operational experiences not included in the preliminary report involving failures of electronic components due to elevated temperature. We have enclosed a copy of our final report for your information and use as you may deem appropriate.

The study was initiated by an event that occurred at the McGuire Station in June 1984, during which the plant's control area ventilation system was lost for 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br />. Based on this event, and the resulting initial AE0D study, Information Notice 85-89 " Potential Loss of Solid-State Instrumentation Following Failure of Control Room Cooling" was issued to alert licensees of operating nuclear plants of the event and the NRC's concerns. Three other events were subsequently identified in which the root cause of failure of the instrumentation system was determined to.,e overheating of electronic components located in cabinets in a controlled environmental area.,The enclosed report documents the review and evaluation of these four events.

Overheating of electronic components in safety-related instrumentation and control systems raises two concerns:

(1) decreased reliability of electronic equipment due to increased failure rate of heat sensitive electronic components, and (2) the potential for common cause failure of redundant instrument channels due to extended loss of normal cooling to the cabinets in which the instruments are located. The enclosed case study report contains specific recommendations which, based on the study's findings and conclusions, address these two concerns.

These recommendations are currently being reviewed by the Nuclear Regulatory Commission staff.

RD-25 speen L % des x TR_7 8612230192 861205 PDR ORO TEXD

o a

Mr. E. E. Van Brunt, Jr. A copy of the final case study report and this letter are being placed in the Public Document Room at 1717 H Street, N.W., Washington, D.C. 20555.

If you have any questions regarding this report, please contact Matthew Chiramal of my staff. Mr. Chiramal can be reached at (301) 492-4441.

Sincerely, l

om pus m oun ts

c. J. m a C. J. Heltemes, Jr., Director Of# ice for Analysis and Evaluation l

of Operational Data

Enclosure:

As Stated DISTRIBUTION:

PDR AE0D CF AE0D SF ROAB CF ROAB (sr/ conc.)

MChiramal' SRubin WLanning KBlack MWilliams FHebdon CHeltemes OFC

SC:ROAB
BC:POAB
DD:AEOD
D:AEO L

_:.___________: ___4'______:..

IK____:....________:.___________:__________.

_ _ _ _ _ : _ _ _ _ _ _ _ _ _ _ _ _ : _ _ _ _ _ _ _ _M_k

FHelho,n

(

CH emes NAME :MChiramal:as SRubin 11/ 4 /86
21 i / 4 / 8 6 :11/ /86 DATE :11/ k/86 0FFICIAL RECORD COPY

'