ML20153D583
| ML20153D583 | |
| Person / Time | |
|---|---|
| Site: | Oyster Creek |
| Issue date: | 02/26/1988 |
| From: | Fiedler P GENERAL PUBLIC UTILITIES CORP. |
| To: | Russell W NRC OFFICE OF INSPECTION & ENFORCEMENT (IE REGION I) |
| References | |
| IEB-87-002, IEB-87-2, NUDOCS 8805090204 | |
| Download: ML20153D583 (97) | |
Text
I
{
GPU Nuclear Corporation Post Offace Box 388
&&g&f
,4p) l Route 9 South Forked Arver.New Jersey 08731-0388 609 971 4000 Wnters Dueet Dial Number:
February 26, 1988 Mr. William T. Russell, Administrator Region I U.S. Nuclear Regulatory Comission 475 Allendale Road King of Prussia, PA 19406
'e
Dear Mr. Russell:
's
Subject:
Oyster Creek Nuclear Gener,ating Station Docket No. 50-219 Response to NRC Compliance Bulletin 87-02; Fastener Testing to Determine Materia' Confonnance NRC Compliance Bulletin 87-02 requested that designed fastener types be randomly selected and tested for conformance to requisite standards. to this letter meets the reporting requirements of that bulletin.
If any further information is required, please contact Mr.IJohn Rogers of ray staff at (609)971-4893.
(9 Very truly yours, Pe F iedler Vice President and Director OysterCreek e
PBF/JR/dmd (0444A)
Sworn to and Subscribed before me Enclosure this J?/, #
day of February 1988.
M n /n.b Maas ANotaryPublicofgwgsg, Y
N T J3'X ' yg/
" Mr. Alexander W. Dromerick, Project Manager f/y Cens:n usm cc: U.S. Nuclear Regulatory Commission Washington, DC 20555 (l
l NRC Resident Inspector Oyster Creek Nuclear Generating Station Forked River, NJ 08731
\\
8805090204 880226 PDR ADOCK 05000219 O
DCD of the General Puche Utihtres Corporabon
s The following NRC requests and GPU Nuclear responses have"been numbered to correspond to the format utilized in NRC Compliance Bulletin 87-02.
Request:
1.
Describe a) the characteristics currently examined during receipt inspection of fasteners (i.e., head markings for grade and manufacturer symbols, review of certified material test report os certificate of conformance); and b) internal controls utilized during storage and '
issuance from stock to assure the appropriate use of fasteners.
Response
la. Receipt inspection requirements of safety related fasteners have been specified in the GPUN Quality Assurance Plan (Attachment 4) and two GPUN Inspection Surveillance Plans: R-6133-2062.2, and R-6133-2074.1. The attributes inspected and evaluated include:
identification, marking, physical damage, physical properties, dimensions, workmanship, and documentation.
Non-safety related (NSR) fasteners are not within the".
sccpe of the Quality Assurance Plan, but are receipt inspected when the procurement documents specify that a receipt inspection is required.
Ib. After receipt inspection, safety related fasteners are tagged to provide requisite traceability from receipt through installation.
NSR fasteners are stored in accordance with appropriate ANSI standards, but are not tagged for traceability.
b 1
Request:
Select a minimum sample of ten (10) non-safety related fasteners (studs, 2.
bolts, and/or cap screws), and ten (10) safety-related fasteners (studs, bolts, and/or cap screws) from current, in use, stock.
The sample is to be obtained by the licensee with the participation of an NRC inspector.
Fasteners procured to meet the following chemical and mechanical A-193 grades B7, 88, and B16; SAE J429 grade properties are of. interest:
5 and 8; A-449; A-325 Types 1, 2, or 3; A-354 grades BB, BC, BD; A-490; A-320 LTM; A-307; A-563; or equivalent.
3.
For the selected sample of fasteners in item 2, include a sample of typical nuts that would be used with each fastener (one-for-one).
In particular, nuts purenased to the chemical and mechanical specifications of A-194 are of interest.
Page 2
(
Response
2., 3.
Fastener Testing Data Sheets and Laboratory Test Result Certificates of Conformance have been included as Attachments.1 and 3.
- Bolts, studs, and screws have been assigned Oyster Creek Identification Nos.
0C-001 through 00-010 and 0C-021 through 0C-030. Nuts have been assigned Identification Nos.00-011 through 0C-020 and 0C-031 through 0C-040, including OC-038a which was an additional selection at the request of the NRC Senior Resident Inspector.
Request:
Chemical testing shall be performed on all samples. 'MeShanical testing 4.
shall be performed on each safety-related fastener.
Hardness testidg shall be performed on each nut and non-safety related fastener. A11 testing shall be performed by a laboratory which the licensee has qualified for this type of testing and appears on the If eensee's approved vendor list. Testing performed shal: be done in accordance with the requirements of the fastener's specification, grade, and class, and the test shall evaluate the ultimate tensile strength, hardness and chemical properties as required by the fastener's specification, grade and class.
Each sample shall be tagged with the sample's ID number.
Response
l 4.
The results of the laboratory tests are included in Attachment 3, Certificates of Conformance.
Please note that the Certificate of Conformance for sample no. 0C-021 was corrected on February 18, 1988.
The original document contained an error which was identified during the data review process.
Request:
5.
The results of all tests, together with supporting information, are to be reported to the NRC utilizing the format shown in Attachments 1 and 2 of this bulletin.
Include the names and addresses of suppliers and manufacturers of safety-related fasteners and, to the extent possible, of non-safety-related fasteners.
For any f astener found out of specification, provide an evaluation of the safety significance including consideration of the most limiting application.
Responsei 5.
Required data are included in Attachments 1 and 2 to this response.
L Page 3
(
Nonconformances:
- I.D.00-002 was the only safety related fastener that did not meet the laboratory acceptance criteria. This fastener was procured for generic use and was only out of specification in hardness.
It was determined that this fastener could be susceptible to increased stress corrosion cracking if used in the reactor vessel environment.
However, due to the short potential in-service time and the unlikely use of this fastener in this application, continued operation was justified until a more detailed evaluation could be performed and/or specific use determined.
- I.D. 0C-021 was a non-safety related generic use screw that was out of specification in chemical, hardness, and elongation.
Since.this screw could not have been used in a reactor vessel environment due to programmatic controls, failure due to the lower elongation is the major concern. The likelihood of a' missile hazard from non-safety equipment due to the failure of this fastener is extremely low and is under further evaluation.
- I.D. 0C-022 and I.D. 0C-023 were non-safety related generic use fasteners that were out of specification in hardness and/or chemical requirements.
It was determined that these fasteners were subject to increased stress corrosion cracking but that they were not a safety concern since they could not have been used in the reactor vessel environment.
- I.D. 0C-038 was a non-safety related fastener that was out of specification in hardness.
It was determined that this fastener would meet its intended function (body to bonnet nut on a non-safety related valve).
Request:
4 Based on the results of the testing and review of current procedures, 6.
describe any further actions being taken to assure that fasteners used in the plarit meet the requisite specifications and requirements and that the operability of safety-related plant components is not affected.
Response
Oyster Creek has had a program to assure the quality of fasteners procured for safety related applications since 1986.
The one safety related fastener with the non-conformance had been procured prior to the initiation of this program. Additionally, the procurement of NSR fasteners has been minimized. Therefore, as an on-going program to assure the acceptability of fasteners is in place, no additional corrective actions are required.
(
l PREFACE TO NTTACHMENT 1 All "Safety Related" fasteners are bought from Vendorsion.jthe GPUN QA Approved r
Vendor's list.
Products were generally considered to be Commercial Grade and the Purchase Orders designated as Nuclear hafety Related or Important to Safety.
4
\\
's..
e
- J d
4 40 r
i 9
r -... -, _ _, - -
ae.
,,.____,w,---
. - - - -,., ~,. - - - -,
t Fastener Testing Data Sheet
- Sample ID# 0C-001 Fastener
Description:
1/4" - 20 x 1.50, Hex Cap Screw Description of Sample Stock Location:
1481,;Vidmar, Slid'ing Draw Cabin'et Material Specification as Documented by Licensee Records: ASTM-A 193 BSM Head Marking (Specification and Manufacturer):
N 88M
- Class / Procurement Level: NSR General Plant Application (e.g., Pressure Boundary, S;c ;;.csi)
Vendor: NOVA Machine QA Requirements Impos'ed on Vendpr:
C.M.T.R.'rq Licensee Rep,resentative:
Signature 1
[l[ildM Date
}h
)
6
~
- The sample 10# shall have a prefix that contains the licensee facility initials.
- If applicable, please provide an explanation for your clanification system.
I Fastener Testing Data Sheet
- Sample IDH OC-002
<j Fastener
Description:
5/16" 2.00 Hex Cap Screw Description of Sample Stock Location: 148G Vi,dmar Cabinet ~
Material Specification as Documented by Licensee Records:
ASTM-A193 BRM Head Marking (Specification and Manufacturer):
31 6
- Class / Procurement Level: NSR General Plant Application (e.g., Pressure Boundary, Struct;r:1)
Vendor: Allied Nut and Bolt QARequirementsImposkdonVendor: CMTR's i
licensee Repfesentative:
(
Dated.
6 b
u
W-Signature o
- The sample 10# shall have a prefix that contains the licensee facility initials.
- If applicable, please provide an explanation for your classification system, t
I Fastener Testing Data Sheet
- Sample 10# 0C-003 Fastener
Description:
3/8 - 16 x 2.25 Hex Cap Screw I.
Description of Sample Stock Location:
I 50 F;Vidmar Cabine:
Material Specification as Documented by Licensee Records: ASTM-A 193 B7 Head Marking (Specification and Manufacturer): T8 B7
- Class / Procurement Level:
NSR General Plant Application (e.g., Pressure Boundary, %ratecd )
Vendor: Allied Nut and Bolt QA Requirements Impos() on Vendor: CMTR's 4
Licensee Representative:
Akb {b bk W
Date Signature d
- The sample 10# shall have a prefix that contains the licensee facility initials.
- If applicablo, please provide an explanation for your classification system, l
l l
'l Fastener Testing Data Sheet
- Sample 10# 00-004 Fastener
Description:
7/16" - 14 x 1.00" Hex Cap Screw ',
<c Description of Sample Stock Location:
150E Vidmar Cabine't Material Specification as Documented by Licensee Records: ASTM-A193 B7 Head Marking (Specification and Manufacturer):
9 87
- Class / Procurement Level:
NSR i
General Plant Application (e.g., Pressure Boundary, StructurG)
Vendor:
Hardware Specialty Co.
QA Requirements Impos'gd on Vendor: CMTR's g
Licensee Representative:
heSb MM4 Date f
Signature
- j b
- The sample 10# shall have a prefix that contains the licensee facility initials.
- If applicable, please provide an explanation for your classification system.
G.
Fastener Testing Data Sheet
- Sample ID# 0C-005 Fastener
Description:
1/2" - 13 x 2.00" Heavy Hex Screw; j
I Description of Sample Stock Location:
150 C;Vidmar Cabinet Material Specificetion as Documented by Licensee Records:
ASTM-A193 B7 Head Marking (Specification and Manufacturer): TB B7
(.
- Class / Procurement Level: NSR s..
General Plant Application (e.g., Pressure Boundary, Otc.;t.cc,',)
Vendor:
Nova Machine Co.
QA Requirements Impos4) on Vendor: CMTR's Licensee Representative:
M!b (L kElvM Date Signature a
0
- The sample IDf shafl have a prefix that contains the licensee facility initials.
- If applicable, please provide an explanation for your classification system.
,--m
Fastener Testing Data Sheet
- Sample ID# 0C-006 Fastener
Description:
9/16" - 12 x 1.00" Screw Heavy He'x 'i 1, -
Description of Sample Stock Location: 148E Vldmar Cabinet Material Specification as Documented by Licensee Records: ASTM-A 193 B8M Head Marking (Specification and Manufacturer): NF 88M
- Class / Procurement Level:
NSR General Plant Application (e.g., Pressure Boundary, St ;ct r:? }
Vendor: Alliet Nut & Bolt Co.
QA Requirements impose'd on Vendor: CMTR's 1,
Licensee Representative:
[Af4t4 Date 4 _%
b Signature D
l)
- The sample 10# shall have a prefix that contains the licensee facility initials.
- If applicable, please provide an explanation for your classification system.
d
(
f Fastener Testing Data Sheet
- Sample ID# 00-007 Fastener
Description:
5/8" - 11 x 6.00", Screw Heavy lle3,
I.
Description of Sample Stock Location:
I 48 C Vidmar Cabinet Material Specification as Documented by Licensee Records: ASTM-A193 88M Head Marking (Specification and Manufacturer): NF B8M
- Class / Procurement Level:
ITS General Plant Application (e.g., Pressure Boundary, Structural)
Vendor: Allied Not & Bolt Co.
QA Requirements Impose,d on Vendor: CMTR's nottavailable, requested from vendor Licensee Representative 2f16!5s' I br/*!OF+ '(z Date
__ bce-Signature
.x
/
/y.
- The sample ID# shall have a prefix that contains the licensee facility initials.
- If applicable, plesse provice an explanation for your classification system, i
t
(
Fastener Testing Data Sheet
- Sample IDf 0C-008 Fastener
Description:
3/4" - 10 X 2.00" Heavy Hex Scre% 9 Description of Sample Stock Location:
152E Vidmar Cabinet Material Specification as Documented by Licensee Records: ASTM-A193 B7 Head Marking (Specification and Manufacturer): J B7
- Class / Procurement Level:
ITS General Flant Application (e.g., Pressure Bounda.*y, Stca m ;.1)
Vendor: Allied Nut a Bolt Co.
QA Requirements Impo:'64 on Vendor: CHTR's g
Licensee Representative:
Signature
(
04 d U$'0DR Date M h
()
t, i Shall have a prefix that contains the licensee facility initials.
- 1.le Sami please provide an explannion for your classification system.
9 L
1 i
m_._
(
i Festener Testing Data Sheet
- Saniple ID# 00-009 Fastener Des:ription:
7/8" - 9 x 3.00" Screw Heavy Hex ; ;
Description of Sample Stock Location:
152C Vidmar Cabinets l
Material Specification as Documented by Licensee Records: ASTM-A 193 B7
.ead Marking (Specification and Manufacturer): J 87 4
l
- Class / Procurement Level:
(..
General Plant Application (e.g., Pressure Boundary, Str.;;..e')
Vendor: Hardware Specialty Co.
QA Requirements ImposdA on Vendor: CMTR's g
Licensee Representative:
d.
6Lii'(A4 Date Nh Signature
~
J
()
- The sample IDf shall have a prefix that contains tha licensee facility initials.
- If applicable, piecse provide an explanation for your classification system.
i Fastener Testing Data Sheet 4
- Sample ID# 0C-010 Fastener
Description:
1" - 8 x 2.50" Screw Heavy Hex o, '
Description of Sample Stock Location:
I 48A,Vidmar Cabinets Material Specification a: Documented by Licensee Records: Asid-A 193 B8M Heat Marking (Specification and Manufacturer): NF B8M
- Class / Procurement Level: NSR
\\
\\..
General Plant Application (e.g., Pressure Boundary, Sten::ttrre+)
Vendor: Allied Nut & Bolt Co.
QA Requirements ImpoOd on Vendor: CMTR's Licensee Representative:
h h
Signature A.
44M Date e
o
- The sample ID# shall have a prefix that contains tne licensee facility initials.
- If applicable, please provide an explanation for your c'assification system.
I Fastener Testing Data Sheet
- Sample ID# 0C-011 Fastener
Description:
1/4" - 20 Maavy Hex Nut l y Description of Sample Stock Location:
1540 'jfdmar Cabinet Material Specification as Documented by Licensee Records: ASTM-A194 8M Head harking (Specification and Manuf acturer):
B 8M
- Class /Procuremant Level: NSR General Plant Application (e.g., Pressure Boundary, 0;c.;;.r;')
Vendor: Nova Machine Co.
QA Requirements Impos'ad on Vendor: CMTR's licensee Rep,resentative:
Signature lAl*M Date M
9
,)
- The sample ID# shall have a prefix that contains the licensea facility initials.
- If applicaole, please provide an explanation for your classification system.
I httachment i Fastener Testing Data Sheet
- Sample ID# 00-012 Fastener
Description:
5/16" - 18 Nut Heavy Hex e,c Description of Sample Stock Location:
154F V,idmar Cabinet Material Specification as Documented by Licensee Records: ASTM-A194 8M Head Marking (Specification and Manufacturer):
31 6
- Class / Procurement Level: NSR s.
General Plant App 1tcation (e.g., Pressure Boundary, L.n., e!)
Vendor: Nova Machine Co.
QA Requirements Impos'e.d on Vendor: CMTR's g,
Licensee Representative:
J.!M!@
Signature L
teuM Date l*
.~
f
- The sample 10# shall have a prefix that contains the licensee facility initials.
- If applicable, please provide an explanation for your classification system.
w
-y._
-r-
7-f I-t Fastener Testing Data Sheet
- Sample ID# 0C-013 Fastener
Description:
3/8" - 16 Nut Heavy Hex r,
.j..
Description of Sample Stock Location:
154C Vidmar Cabinet Material Specification as Documented by Licensee Records:
ASTM-A 194 2H Head Marking (Specification and Manufacturer): T 2H
- Class / Procurement level: NSR General Plant Application (e.g., Pressure Boundary, ';t..;t.cd )
Yendor: Nova Machine Products B
QA Requirements Impose,d on Vendor: CMTR's Licensee Representative:
[A bu hutct/.
}6 [f"&
Date Signature g.-
2
- The sample ID# shall have a piefix that contains the licensee facility initials.
- If applicable, please provide an explanation for.your classification system.
I
(-
Fastener Testing Data Sheet
- Sample ID# 0C-014 Fastener
Description:
7/16" - 14 Nut Heavy Hex Description of Sample Stock Location:
154C Vidmar Cabinet Material Specification as Documented by Licensee Records:
ASTM-A194 2H Head Marking (Specification and Manufacturer): NH 2H
- Class / Procurement Level:
\\%.
General Plant Appitcation (e.g., Pressure Boundary, Str;;;;r;')
Yendor: Hardware Specialty Co.
QARequirementsImpos6fonVendor: CMTR's Licensee Representativd:
Abb b
46M Date Signature tw
[
- The sample ID# shall have a prefix that contains the licensee facility initials.
- If applicable, please provide an explanation for your classification system.
L 0
m. -
Fastener Testing Data Sheet
- Sample 10# 0C-015 Fastener
Description:
1/2" - 13 Nut Heavy Hex
', 'j Description of Sample Stock Location:
1548 yidmar,abine't Material Specification as Documented by Licensee Records: ASTM-A194 2H Head Marking (Specification and Manufacturer): NH 2H i
- Class / Procurement Level:
\\s..
General Pint Application (e.g., Pressure Boundary, L.G. m+)
Vendor: Allied Nut A Bolt Co.
QA Requirements Impos'ed on Vendor: CMTR's Licensee ReDresentative:
Signature L !
CAh4 Date M 3 (: 6 3
l<
- The sample ID# shall have a prefix that contains the licensee facility initials.
- If applicable, please provide an explanation for your classification system.
l t
Fastener Testing Data Sheet
- Sample IOi 00-016 Fastener
Description:
9/16" - 12 Nut Heavy Hex gp Description of Sample Stock Location:
154E Vidmar Cabinet Material Specification as Documented by Licensee Records: ASTM-A194 8M Head Marking (Specification and Manufacturer): J 8M
- Class / Procurement Level: NSR General Plant Application (e.g., Pressure Boundary, Struct;r;')
Vendor: Allied Nut & Bolt Co.
QA Requirements Impos'gd on ' vendor: CMTR's Licensee Representative:
/
Signature a
f' LEl#L(
Date
.a 16 5)
/
g
%/
! )
- The sample 10[shall have a prefix that contains the licen ae facility initials.
- If applicabis, please provide an explanation for your classification system.
i I
ti c-,,
Fastener Testing Data Sheet
- Sample ID# 00-017 Fastener
Description:
5/8" - 11 Nut, Heavy Hex
', }
Description of Sample Stock Location:
154E Vidmar Cabinet Material Specification as Documented by Licensee Reco;ds:
ASTM-A194 8M Head Marking (Specification and Manufacturer):
T BM
- Class / Procurement Level: NSR s
General Plant Application (e.g., Pressure Boundary. -Str.;tur.1)
Vendor: Nova Machine Products QA Requirements impos'gd on Vendor: CMTR's 1,
Licensee Rep,resentative:
d6tVr Date
.O 3
Signature
() -
C
- The sample ID# shall have a prefix that contains the licensee facility initials.
- 1f applicable, please provide an explanation for your classification system.
i I
Fastener Testing Data Sheet
- Sample IDi 00-018 Fastener
Description:
3/4" - 10 Nut, Heavy Hex Description of Sample Stock Location:
154A Vidmar Cabinet Material Specification as Documented by Licensee Records: ASTM-A194 2H Head Marking (Specification and Manufacturer): D 2H
- Class / Procurement Level: NSR Gereral Plant Application (e.g., Pressure Boundary, Str.;;. ;i)
Vendor: Nova fiachine Products QA Requirements Impos'gd on Vendor: CMTR's Licensee Representative:
Signature M
Date 17/10
- The sample 101 shall have a prefix that contains the licensee facility initials.
- If applicable, please provide an explanation for your classification system.
l L
I i
l
t I
Fastener Testing Data Sheet
- Sample IDi 00-019 Fastener
Description:
7/8" - 9 Nut, Heavy Hex s
e o Description of Sample Stock Location:
L 72M; Boxed on Shelf Material Specification as Documented by Licensee Records: ASTM-A194 2H Head Marking (Specification and Manufacturer): 0 2H
- Class / Procurement Level:
ITS General Plant Application (e.g., Pressure Boundary,-Gi...e,d )
Vendor: Nova Machine Products QA Requirements Impos'e,d on Vendor:
CMTR's Licensee Rep,resentative:
Signature is,
hM Date b
u-D
- The sample 10# shall have a prefix thet contains the licensee facility initials.
- If applicable, please provide an explanation for your classification system.
l
9 t
i Fastener Testing Data Sheet
- Sample IDf 00-020 Fastener
Description:
1" - 8 Nut Heavy Hex Description of Sample Stock Location:
1540 Vidmar Cabinet Material Specification as Documented by Licensee Records: ASTM-A194 8M Head Marking (Specification and Manufacturer):(-ySM
- Class / Procurement Level:
ITS t
General Plant Application (e.g., Pressure Boundary, 0;c.c;.r;')
Vendor:
Lone Star Screw QA Requirements Imposed on Vendor: CMTR's Licensee Representative:
3 fM!f 5
/c hts i
kft&t4 Date Signature c:)
J
- The sample 10# shall have a prefix that contains the licensee facility initials.
- If applicable, please provide an explanation fer your classification system, a.
9
..____.__,,________,_____m.
Fastener Testing Data Sheet
- Sample ID# OC-021 Fastener
Description:
Screw, Hex Cap 1/2" - 13 x 21/2"', ;.
Description of Sample Stock Location: Vidmar Cabinet Material Specification as Documented by Licensee Records: ASTM-A193 GRBS Head Marking (Specification and Nanufacturer):l/(Two Hash Marks)
- Class / Procurement Level: NITS J
(
General Plant Application (e.g.
,"ce;;.. i Lor.Jo.i. L.ct., ei)
Vendor: Schnitzer Alloy Inc.
QA,,,tquirements Impos'ed on Vendor; N/A i
Licensee Rep,resentative:
Signature A.
M40tA Date
>h
(.)
?
- The sample IDf shall have a prefix that contains the licensee facility initials.
- If applicable, please provide an explanation for ycur classification system.
" ' ' ^ ~
w - - - ~ ~-- --.,,._.____ ____
a s
s Fastener Testing Data Sheet
- Sample IDf 0C-022 Fastener
Description:
Screw, Hex Cap 5/16" - 18 x 1 1/2' a
i Description of Sample Stock Location: Vidmar Cabinet Material Specification as Documented by Licensee Records: BIS B7 Head Marking (Specification and Manufacturer):
NITS
- Class / Procurement Level: NITS
&rr General Pl ant Application (e.g., 7,.... Svw.v.11, $nvuu,.i)
Ve ndor'. Diversified Speciality QA Requirements Imposed on Vendor: N/A Licensee Representative:
fM Date d4 b)
Signature t
o
~
(
- The sample IDf shall have a prefix that contains the licensee facility ir,itials.
- If applicable, please provide an explanation for your classification system.
6 I
Fastener Testing Data Sheet
- Sample ID# 00-023 e <
Fastener
Description:
Screw, Hex Cap 1/2" - 13 x 1 1/4 ' i a
0 s
Description of Sample Stock Location: Vidman Cabinet Material Specification as Documented by Licensee Records: ASTM-A193 GR 88 t
Head Marking (Specification and Manufacturer):
1_H
- Class / Procurement Level: NITS k,.
General Plant Application (e.g., " :: r e h=S y, St=t :? )
Vendor:
Schnitzer Alloy
(
~,
QA Requirements Impose'd on Vendor: N/A Licensee Representative:
i.
Signature J
_tofoh4 Date h.
f)
- The sample IDf shall have a prefix that contains the licensee facility initials,
- If applicable, please provide an explanation for your classification system, i
s' Fastener Tecting Data Sheet
- Sampl e 10# 00-024 o
Fastener
Description:
Stud, 5/8"-11 x 4" Bolt, Full Thrhad' (UNC 2A)
Description of Sample Stock Location:
On Shelf in Box Material Specification as Documented by Licensee Records: ASTM-A 193 B7 Head Marking (Specification and Manufacturer): MB7
- Class / Procurement Level: NITS General Plant Appif eation (e.g., Pc;;;.. ; 0;.r.Ac,, ::,.;;.c;;)
Vendor: Diversified Speciality o
QA Requirements Imposed on Vendor: N/A LicenseeRe(resentative:
b M
d biOV' Date Signature i
//
d
~
- The sample 15# shall have a prefix that contains tne licensee facility initials.
- 1f applicable, please provide an explanation for your classification system.
t
4 f
I.
Fastener Testing Data Sheet
- Sample IDf 0C-025 4
Fastener
Description:
Stud, Bolt Full Thread 1 1/8 - 7 x' 61/2" i.
Description of Sample Stock Location:
On Shelf in Box Material Specification as Documented by Licensee Records:
ASTM-A193 B7 Head Marking (Specification and Manufacturer):
(None, Cut Rod) e
- Class / Procurement Level:
NITS General Plant Application (e.g., are : r: S xt:ry, Mr.ct..;1)
Vendor: Diversified Specialties Co.
^
QA Rtquirements Imposed on Vendor: N/A Licensee Representative:
Signature k
iA
/(ftd#
Date ) <3h j b
{
- The sample 10# shall have a prefix that contains the licensee facility initials.
- !f applicable, please provide an explanation for your classification rystem.
_.,,..ms,
I Fastener Testing Data Sheet
- Sample 10# 00-026 r
Fastener
Description:
Bolt, 3/4" - 10 x 41/2 s,,
Description of Sample Stock Location:
Vidmai Cabinet Material Specification as Documented by Licensee Records: ASTM-A325 Head Marking (Specification and Manufacturer): UNY A325 (3 Hash Marks)
- Class / Procurement Level: NITS 6.,*
General Plant Application (e.g., T L..,,, ;;...uo, al)
Vendor: Diversified Specialties Inc.
QA Requirements Imposed on Vendor: N/A Licensee Representative:
I
("'t GL M Date 0
('
Signature L8
.t
- The ump.e 10# shall have a prefix that contains the licensee facility initials.
f 1
- 1f applicable, please provide an explanation for your classification system, c
I
[
I i
Fastener Testing Data Sheet i
1 i
- Sample ID# 00-027 Fastener
Description:
Stud, Continuous Thread 7/8-9 x 4'.00' i
I Description of Sample Stock Location: Vidma'r Cabinets Material Specification as Documented by Licensee Records: Not documented on P.O., Marking on Item "VB7" = ASTM-A193 B7 Head Marking (Specification and Manufacturer):
V, B7
- Class / Procurement Level: NITS General Plant Application (e.g., Pressure Boundary, "A..,;. e',)
Vendor: Fisher Controls International g
QA Requirements Imposed on Vendor: None Licensee Reptesentctive:
2 ) [2
($4dt4 Date Signature 1
{l
- The sample 10# shall have a prefix that contains the licensee facility initials.
- 1f applicable, please provide an explanation for your classification system.
f Fastener Testing Data Sheet
- Sample IDf 00-028 e
Fastener
Description:
Stud, Continuous Thread 3/8-16 x f.15 4
Description of Sample Stock Location: Bagged in Bin (Shelf Bin)
Material Specification as Documented by Licensee Records:
Not Documented on P.O., Marking on item "VB7" = ASTM-A194 B7 Head Marking (Specification and Manufacturer):
V, B7
(
- Class / Procurement Level:
NITS General Plant Application (e.g., Pressure Boundary, "L. ;..e')
Vendor: Fisher Control International
~,
QA Requirements Imposed on Vendor: None Licensee Rep /esentative:
"J bb
'hd bhd/4 R4 Date Signature
\\
Le y
- The sample 10# shall have a prefix that contains the licensee facility initials.
- If applicable, please provide an explanation for your classification system.
Fastener Testing Data Sheet
- Sample ID# 00-029 e
a Fastener
Description:
Screw, Square Head 1 1/4" - 8 x $ 0
i r
Description of Sample Stock Location:
In box on Shelf Material Specification as Documented by Licensee Records:
ASTM-A193 GR B7 Head Marking (Specification and Manufacturer): CFS 87
- Class / Procurement Level: NITS
(
General Pl ant Application (e. g.,."r;;;.r; %.c.A,, ";;.,;...' )
Vendor: Shall Cross Bolt Co.
QA Requirements Imposed on Vendor: n/a Licensee Representative:
'[4ftd4 Date )
[
Signature v
- The sample 104 shall have a prefix that contains the licensee facility initials.
- If applicable, please provide an explanation for your clessification system.
i
i Fastener Testing Data Sheet
- Sample IDf OC-030 f
Fastener
Description:
Stud, Continuous Thread 1 1/2 - 8 x % 1/4" Description of Sample Stock Location: On Shilf in Box Material Specification as Documented by Licensee Records:
ASTM-A193 B7 Head Marking (Specification and Manufacturer):
D B7
- Class / Procurement Level:
NITS Y
General Plant Application (e.g., Ne;,.. ; Co.r,1,7, St..;t. d )
Vendor: Leonard Jed Co.
1 QARequirementsImposhdonVendor: n/a
\\
Licensee Representative:
(/Let/
Date 9 d 'c [ b Signature
/n
(
- )~"
- The sample ID# shall have a prefix that contains the licensee facility initials.
- If applicable, please provide an explanation for your classification system.
i
I t
Fastener Testing Data Sheet
- Sample ID# 00-031 e a e'
Fastener
Description:
Nut, Hex 1 1/4" - 8 Description of Sample Stock Location:
In Box on Shelf Material Specification as Documented by Licensee Records: ASTM-A194 2H Head Marking (Specification and Hanufacturer): FC 2H 4
- Class / Procurement Level: NITS General Plant Application (e.g.,."r:br; ";-,dec,, S;c.;t.r;')
Vendor: Diversified Specialties Inc.
QA Requirements Impos6d on. Vender:
n/a Licensee Rep'resentative:
Signature fw
/0L d6t(h.tr Date 2
(,
y a
- The sample ID# shall have a prefix that contains the licensee facility initials.
- If applicable, please provide an explanation for your classification system.
^
a, f
Fastener Testing Data Sheet
- Sample ID# 00-032
' 'I Fastener
Description:
Nut, Hex 1 1/2" - 8
'o '
Description of Sample Stock Location:
In Bo'x on Shelf ASTM-A194 2H Haterial Specification as Documented by Licensee Records:
Head Marking (Spacification and Manufacturer): JS 2H
- Class / Procurement Level:
NITS General Plant Application (e.g.
- =r; %. 2.,, %,.ct. 1) i i
Vendor: Williams and Co.
QA Requirements Impos6d on Vendor: N/A
\\
Licensee Representative:
kdlcN4 Date d//
Signature tw e
.l
- The sample ID# shall have a prefix that contains the licensee facility initials.
- If applicable, please provide an explanation for your classification system.
i
l I
Fastener Testing Data Sheet
- Sample ID# 00-033 I
4
' i Fastener
Description:
Nut, 7/8 - 9 a
~
Description of Sample Stock Location: Bagged, Boxed on Shelf Material Specification as Documented by Licensee Records: A 194 2H Head Marking (Specification and Manufacturer):
HN, 2H
- Class / Procurement Level:
NITS t
General Plant Application (e.g., Pressure Boundary, -C;c.;;.r:1' Yendor: Crane Co.
QA Requirements Impos(d on Vendor: None Licensee Rep esentative:
O 1[ !M b
fndv4 Date Signature
- The sample ID# shall have a prefix that contains the licensee facility init'61s.
- If applicable, please provide an explanation for your classification system,
.l:
3 Fastener Testing Data Sheet
- Sample ID# 00-034 Fastener
Description:
Nut, Hex 1 - 3/8" - 8 i
Description of Sample Stock Location:
In Be'x on Shelf Material Specification as Documented by Licensec Records: ASTM-A194 2H Head Marking (Specification and Manufacturer): JS 2H
- Class / Proc rement Level: NITS General Pl ant Application (e.g., "......
"....d..
tc.;t.r:1 )
Yendor: Williams and Co.
QA Aequirements Imposed on Vendor:
n/a Licensee Repfesentative:
Signature dw UJt' Date d d f I
)
d
'~
- The sample ID# shall have a prefix that contains the licensee facility initials, t
- 1f applicable, please provido an explanation for your classification system.
)
l I
Fastener Testing Data Sheet
- Sample 10# 0C-035 e
e' Fastener
Description:
Nut, Hex 1 1/2" - 8 Description of Sample Stock Location:
In Box on Shelf l
l Material Specification as Documented by Licensee Records: ASTM-A194 2H l
Head Marking (Specification and Manufacturer): 0 2H
- Class / Procurement Level: NITS General Plant Appitcation (e.g., "c;;;e ; "e.,,A,, S;.;;.. e')
Yendor: Leonard Jed Co.
QA Requirements Impos(d on Vendor: n/a Licensee Rep'resentative:
/t
' t (sitt&
Date '3 S 4
,,!i Signature 3
V
- The sample 10# shall have a prefix that contains the licensee facility initials, i
- If applicable, please provide an explanation for your classification system.
i
Fastener Testing Data Sheet
- Sample ID# 00-036 e v
' i Fastener
Description:
Nut, Heavy Hex 1" - 8 a, -
Description of Sample Stock Location: Bagged, Boxed on Shelf Material Specification as Documented by Licensee Records: ASTM-A194 2H Head Marking (Specification and Manufacturer):
J, 2H
- Class / Procurement Level:
NITS
+
General Plant Application (e.g., Pressure Boundary, Mc.;;...;)
Vendor: Diversified Specialties Inc.
~
QA Requirements Imposed on.Vendbr: None Licensee Re;Qesentative:
Datebl%/b5b dfu (12tOL9
/
Signature s
s
- The sample IDi'shall have a prefix that contains the licensee facility initials.
- If applicable, please provide an explanation for your classification system.
--~
I t
Fastener Testing Data Sheet
- Sample ID# 00-037 I
4 r
i Fastener
Description:
Nut, 3/4".10 Description of Sample Stock Location:
Bagge'd, Boxed on Shelf Material Specification as Documented by Licensee Records: ASTM-A194 2H Head Marking (Specification and Manufacturer):
J, 2H
- Class / Procurement Level: NITS General Plant Application (e.g., Pressure Boundary, Otc.;.t.c.')
l Vendor: Crane Co.
None QA Requirements Imposhd on Vendor:
Licensee Representative:
/kw L.[duk(
Date )
['
/
Signature
~
d I
- The sample Da shall have a prefix that contains the licensee facility initials.
- 1f applicable, please provide an explanation for your clar,sification system.
t Fastener Testing Data Sheet
- Sample ID# 0C-038
'l Fastener
Description:
Nut 5/8 - 11 s
Description of Sample Stock Location: Bagge'd, Boxed on Shelf Material Specification as Documented by Licensee Records: Not Documented on P.O.#
Marked on item 2T,2H = ASTM A194, 2H Head Marking (Specification and Manufacturer): 2T, 2H k.
- Class / Procurement Level:
NITS General Plant Application (e.g., Pressure Boundary, L wuur li Vendor: Rockwell International s
i QA Requirements Imposed on Vendor: None d
Licensee Representative:
GtW4 Date 7e I
Signature
/(
u u
i l
- ,shall have a prefix that contains the licensee facility initials.
- The 56mple ID
- If applicable, please provide an explanation for your classification system.
1 l
(
9 Fastener Testing Data Sheet l
- Sample 10# OC-038 A e'
Fastener
Description:
Nut 5/8" - 11 8
s Description of Sample Stock Location: Bagged Boxed on Shelf Material Specification as Dor:umer.ted by Licensee Records:
Not Documented on P.C.,
Marked on item "ASTM A194 2" Head Marking (Specification and Manufacturer):
"ASTM-A194 2" (No Manufacturer)
- Class / Procurement level:
NITS G ;ieral Plant Application (e.g., Pressure Boundary, 9trtreterst)
Vendor: Rockwell International QA Requirements Imposed on Vendor: None Licensee Repfesentative:
Signature fl u*
d,hhkd Date M 3 h f
i f)
- The sample 10# shall have a prefix that contains the Ikensee facility initials.
- If applicable, please provide an explanation for your classiffcation system.
t b
l I
Fastener Testing Data Sheet
- Sample ID# 0C-039 e a I
e' Fastener
Description:
Nut, 3/8-16 a.
Description of Sample Stock Location: Bagged, Boxed on Shelf Material Specification as Documented by Licensee Records:
Not Documented on P.O.
Marked on Item T, 2H = ASTM A194, 2H Head Marking (Specification and Manufacturer):
T, 2H k
- Class / Procurement Level:- NITS Generh1 Plant Application (e.g., Pressure Boundary,4;r. :.rrA)
Vendor: Fisher Controls s.
QA Requirements Imposed on Yendor: None Licensee Representative:
Signature
[l 6 -
A 2{dbM Date 2
[,
b
~
7
)
- The sample IDf si;;11 have a prefix that contains the licensee facility initials.
i
- If applicable, please provide an explanation for your classification system.
+-
/
Fastener Testing Data Sheet
- Sample 108 0C-040 1
Fastener
Description:
Nut, 3/4 - 10 l
' l i
i s
Description of Sample Stock Location: Bagged. Boxed on Shelf Material Specification as Documented by Licensee Records:
Not Documented on P.O.#
Marking on Item 2H = ASTM-A194 2H Head Marking (Specification and Manufacturer):
D, 2H
(
- Class / Procurement Level: NITS General Plant Application (e.g., Pressure Boundary, Stc.;t.r:1)
Yendor: Rockwell International s
QA Requirements Imposed on' Vendor: None
\\
Licensee Representative:
Yk / bl4%
Date
.D,h l,e Signature A
O; wn
/
- The sample it)# vill have a prefix that contains the licensee facility initials.
- If applicable, please provide an c.xplanation for your classification syscem, t
~-
~~
Attachmm.it 2 Data Summary l
Mechanical Analysis Chemical Analysis Hardness UTS(ksi )
0.2% YS(ksi)
C Mn P
S Si Mo Cr M1
)1 RB 98 99.5 84.5
.056 1.56
.042
.033
.66 2.494 17.54 12.43
.s 32 RC 31
- 84.9 67.9
.028
- 1. 90
.047
. 01 4
.41 2.343 17.97 1 2. 71 33 RC 26 139.8 1 21.2 462
.97
.023
.020
.25
.21
.94 8
34 RC 30 1 50.0 140.0
.424
.98
.01 5
.022
.30
.26 1.02 05 RC 30 133.4 117.6
.368
.87 01 7
. 01 4
.28
.21
.98 06 RB 96
- 91. 5 84.2
.066 1.45
.048
.028
.48 2.338 17.02 1 0.86 07 RB 93 106.7 86.2
.039 1.83 051
.024
.55 2.160 17.62 1 2. 71 KM)
RC 30 139.3 128.3
.439
.94 021 01 8
.29 17
.99
>D9 Of la 140.8 129.0,e
.398
.89
.032
' '.021
.27 17
.93
)10 RB 96 91.5 63.1
.050 1.45
.041 01 7
.66 2.145 16.50 1 0. 61
)
UTS-ultimate tensile strength; YS-yield strength; C-carbon; Mn-Mar.ganese; P-Phosphorous; S-Sul fur; Si-Silicon; e:
Molybdenum; Cr - Chromium.
e elements listed apply to ASTM A193 B7 or SA193 B7 material. The elements to be reported for other materials tested, 11 conform to those reported in the applicable material specification. Properties found out of specification shall be ed with an asterisk.
-~
-~
~
Data Sununary l
Mechanical Analysis Chemical Analysis Hardness UTS(ksi) 0.2% YS(ksi)
C Mn P
S Si Mo Cr N1
.05 1.03
.020
.01 5
.45 2.63 17.55 1 2.21 ill RB104
.038 1.19
.033
. 01 0 46 2.1 51 18.07 12.70 11 2 RB105
.003
.007
.624
)13 RC 29
.029
.044 473
)14 RC 32
. 01 5
.034 404
-~--
31 5 RC 25
.044 1.24
.031
.020
.56 2.044 1 6.81 10.00 31 6 RB 78
.073 1.54
.026
. 01 0
.72 2.1 84 17.09 10.85 31 7 RB 92
.01 5
.014
.41 2 01 8 RC 29
. 01 9
. 01 7
,e 409 01 9 RC 26
.053 1.70
.031
.01 5
.25 1.927 16.10 1 0.07 020 RB 94 UTS-ultimate tensile strength; YS-yield strength; C-carbon; Mn-Manganese; P-Phosphorous; S-Sulfur; Si-Silicon; up:
-Molybdenum; Cr - Chromium.
1e clements listed apply to ASTM A193 B7 or 54193 B7 material. The elements to be reported for other materials tested, all conform to those reported in the applicable material specification. Properties :found out of specification shall be ted with an asterisk.
Attachi<c.t 2 Data Summary l
Mechanical Analysis Chemical Analysis Hardness UTS(ksf) 0.2% YS(ksi)
C Mn P
S Si Mo Cr Ni RC 35*
107.9 85.5
.076 1.18 029
.024
.39 1. 31 6 17.58*
8.80 s
RC 29 145.4 139.0
.033*
.97 01 9
.01 6
. 31
.021 1.06 RC 28*
104.58 96.9
.008 1.20 028
.009
.62 3.1 34 18.22 9.92 5---
RC 30 142.2 132.1 409
.95
.028
.020
.26 17 1.08 RC 27 141.3 127.8
.407
.93
. 01 4
. 0 21
.27
.25
.99 RC 29 140.4 127.8
.333
.91
.039
.020 F
RC 29 1 36.5 125.4
.382
.88
. 01 2
.033
.26
.26 1.04 RC 35 1 61.7 1 51.9
.373
.92
.01 8
.036
.24
.20 1.02
.384
.86
.035
'.'015
.28
.20 1.10 RC 26 136.0 122.6
,e RC 27 128.3 107.6
.41 0
.86
. 01 4
. 01 9
.27 17
.94 UTS-31timate tensile strength; YS-yield strength; C-carbon; Mn-Manganese; P-Phosphorous; S-Sulfur; Si-Silicon;
[lybdenum;Cr-Chromium.
p elements listed apply to ASTM A7.,3 87 or SA193 B7 material. The elements to be reported for other materials tested, conferin to those reported in the applicable material specification. Properties found out of specification shall be with an asterisk.
4 e
14(.
M:
.F
~
~
~
I l
l
.t Data Summary l
Mechanical Analysis Chemical Analysis Hardness UTS(ksi) 0.2% YS(ksi)
C Mn P
S Si Mn Cr N1
.020
.022 430 31 RC 31 1
.035
.028 450 h2 RC 28
.032
.044 s
1
)33 RC 28
A-
2~
.454 l
.027
.034 h4 437 -
RC 25 1
.033
.026 405 D35 RC 28 l
.035
.022 432
?
D36 RC 27 t
.039
.024
.439 h37 RC 27 1
.037
.021 403
$8 RB 90*
.01 2
.043
?
482 D8A RC 31
.009
.01 3
.695 209 RC 30
.44
.021
.023 040 RC 28 l
=
l UTS-ultimate tensile strength; YS-yield strength; C-carbon; Mn-Manganese; P-Phosphorous; S-Sulfur; Si-Silicon; e:
LMnlybdenum; Cr - Chromium.
olements listed apply to ASTM A193 B7 or SA193 B7 material. The elements to be reported for other materials tested, 11 conform to those reported in the applicable material specification. Properties found out of spectfication shall be Lged with an asterisk.
f ATTACHMENT 3 r <
t,'
CERTIFICATES OF CONFORMANCE
~
o 6
9 4
- o e
d en
$/p$ca/o / $)dmaeco N0. 3 0 *
- 3 2w2 m TER8BS: NET CASH 10 DAYS SERVICE CHARGE OF 1% PER l
MONTH AFTER 10 DAYS.
'p)i ggg swimwa Aoonass
-- NME no wu. siRnti. ousun. rA tee 11 P.O. Box 2A9 Oublin, Pennsylvania 18917 SEIP TO SOLD TO GPU NuclH r Corporation DPU NE lear Corporation 183 & Van Reed Rd., PO Box 15152 Rt.
100 Intorpace Parkway Reading, PA 19612-5152 Parsippany, NJ 07054 ATTN:
W. Jeitner, Ext. S186 ATTN:
Accounts Payable INVOICE DATE SBIPRENT CUST. P.O.
LAB REPORT NO.
2/5/88 PP0622E7R2324 TC-517.I Completo
'"~j,'((}((j((j((j'**j((((
DESCRIPTION
< / :::::::::::::::::::::::::
1/4 - 20 x l-1/2" long Hex Capscrew Sample No. OC 441, P.O. No. OP-03134 5 1 pc.
Item 6004
{jjjjjjjjjjjjjjjjjjjjjjjj
Reference:
GPU Lab Report #159233 Req. #5393-88-2324, Rev. 000
- ~;
- :::****:::::::*::*4 The above referenced sample was submitted to chemical content evaluation by Spectrochemical Analysis and found,to be inThe results are as fo A.
conformance to ASTM A-193, Grade B8M.
ACTUAL REQUIRED ELEMENT
~
0.056 0.09 maximum Carbon 2.04 maximum 1.56 Mang ane se 0.055 maximum 0.042 Phosphorus 0.025 maximum 0.033 Sulfur 0.66 1.05 maximum Silicon 9.85 - 14.15 12.43 I
Nickel 17.54 Chromium 15.80 - 18.20 2.494 1.90 - 3.10 Molybdonum l
Specimen and it was A Tensil9 test was performed on the above Testfound to.be in c i
B.
following results:
REQUIRED ACTUAL 75,000 PSI 99,502 PSI
'r Tensile Strength, 84,577 PCI 30,000 PSI Yield Strength 42.1%
30.0%
Elongation 75.1%
50.0%
.l Reduction of Area Specimen and it A Hardness test was performed on the above Testwas found to C.
I REQUIRED:
RB 100 Maximum
/
ACTUAL:
RB 98 l
following results:
\\'
All testing performed in accordance with GPU Nuclear Q.A. Program, Robert W. McVaug i
I l
f MERCURY CONT AMIN ATION During the testing and Preaiden inspection, the preduct did not come m direct contact C
with mercury or any ci its compounds not with any 5
rnsMn mntainm0 devices employing e singfe boundary i
N 11P M E
No. 3 oeo3 21!v246 seet
/ sca/s
- cWiMrac, Tuness: NET CASH.10 OAYs I
SERVICE CHARGE OF 1%% PER L
MONTH AFTER 10 DAYS.
g SHIPMNO ADDRESS P.O. Box 249 Dublin, Pennsylvania 18917 1ao ulu. sintri. oueun. n seetr SOLD TO SEIP TO GPU N E lear Corporation GPU NuclHr, Corporation 100 Interpace Parkway Rt. 183 & Van Reed Rd., PO Box 15152 Parsippany, NJ 07054 Reading, PA 19612-5152 ATTN:
Accounts Payable ATTN:
W. Jeitner, Ext. 5186 CUST. P.O.
LAB REPORT N0.
SEIPMENT IETOICE DATE PP06223T/R2324 TC-517.2 Complete 2/5/88 DESCRIPTION
'. *.*.* *.*.*.*.*.! ! : *
- I ' * ! *
- !
- I e,.
......g............
1 pc.
5/16 - 18 x 2" long Hex Capscrew
..uG***..****CCC'*:
Sampic No. eC-002, P.O. No. OP-031092
- i
- * * * * * *
- M.* * ; * * ; * * ; * : : : :
Item 8022
- '*:!X****:::::::
Reference:
GPU Lab Report $159233 Req. 45393-88-2324, Rev. 000
((((**(((((((((({*(((({*{
A.
The abovo referenced sample was submitted to chemical content evaluation by Spectrochemical Analysis and found to be in conformance to ASTM A-193, Grade B8M.
The results are ss follows:
ELEMENT REQUIRED ACTUAL Carbon 0.09 maximum 0.028 Manganese 2.04 maximum 1.90 Jhosphorus 0.055 maximum 0.047
- Sulfur 0.035 maximum 0.014
'Bilicon 1.05 maximum 0.41 Nickel 9.05 - 14.15 12.71 Chromium 15.80 - 18.20 17.97 Molybdenum 1.90 - 3.10 2.343 B.
A Tensile test was performed on the above Test Specimen and it was found to'be in conformance to ASTM A-193, Grade B8M per the following results:
REQUIRED ACTUAL Tensile Strength, 75,000 PSI 84,951 PSI Yield Strength 30,000 PSI 67,961 PSI Elongation 30.0%
39.5%
Reduction of Area 50.0%
77.11 C.
A Hardness test was performed on the above Test Specimen and it was found NOT to be in conformance to ASTM A-193, Grade 58M per the following results:
REQUIRED:
RB 100 Maximum / ACTUAL:
RC 31' 9
All testing performed in accordance with GPU Nuclear Q.A. Program.
Robert W. McVaugh MERCURY CONTAMIN ATION During tN testir.g ud Presiden inspection, the product did not come m direct contact
\\L with mercury or any of its compounds nor with any W
2 mercury containing devices employing a single boundary
d sj ratowc, No. 2 eooa 2w2* m g
a TER888: NET CASH 10 DAYS C ! !!9 y
SERVICE CHARGE OF 1%% PER
/
MONTH AFTER 10 DAYS.
z$
g SHIPPING ADDRESS P O. Box 249 Oublin, Pennsytvania 18917 sto wu. sintri, ousun. n seest 80LD TO SEIP '!O GPU NE lear Corporation GPU NuclUr Corporation 100 Interpace Parkway Rt. 183 & Van Reed Rd., PO Box 15152 Parsippany, NJ 07054 Reading, PA 19612-5152
]
ATTN Accounts Payable ATTN:
W. Jeitner, Ext. 5186 CUST. P.O.
LAB REPORT NO.
SHIPMENT INTOICE DATE PP062256/R2324 TC-517.3
- Complete, 2/5/88 OnsCmInIO.
- : 7. :.* * ; * ; * : : * ; * * ; * ; * :8* * ;
I.
1 pc.
3/8 - 16 x 2-1/4" long Hex Capscrew Sample No. OC-003, P.O. No. OP-027437 Item #008 j'**j.j'****j'*j'*jj'jjj'j
Reference:
GPU Lab Report 4159233
- '*;** **:~~~;:**
Roq. 15393-88-2324, Rev. 000
{******j'*j'*j'*jjj',j'*
- ...~. :*;*;;*;;*;*::::*:
A.
The above referenced sample was submitted to chem ca content evaluation by Spectrochemical Analysis and foun,d to be in conformance to ASTM A-193, Grade B7.
The results are as follows:
4 ELEMENT REQUIRED ACTUAL Carbon 0.35 - 0.51 0.462 Manganese 0.61 - 1.14 0.97 Phosphorus 0.040 maximum 0.023 sulfur 0.045 maximum 0.020 i
Silicon 0.13 - 0.37 0.25 I
Chromium 0.70 - 1.25 0.94 0.13 - 0.27 0.21 Molybdenum g
+,
\\
B.
A Tensile test was performed on the above Test Specimen and it was l
found to be in conformance to ASTM A-193, Grade B7 per the following results t REOUIRED ACTUAL Tensile Strength 125,000 PSI 139,898 PSI Yield Strength 105,000 PSI 121,212 PSI Elongation 16.0%
22.6%
Reduction of Area 50.0%
58.5%
C.
A Hardness test was performed on the above Test Specimen in accordance with ASTM A-193, Grade B7 and it was found to have e hardness of RC 26. (No Requirement)
All testing performed in accordance with GPU Nuclear Q.A. Program.
Robert W. McVaugh MERCURY CONTAMIN ATION During the testing and President inspection, the product did not come m direct contact b
with mercury or any of its compounds nor with any mercury containing devices employing a single boundary g_
. ~ _ _ _ _, _
f Cal0 of yYASC6 N0. 3 0 'O O 3 21Sm69%S TERT 08: NET CASH 10 DAYS
,,Q h
SERVICE CHARGE OF 1%% PER MONTH AFTER 10 DAYS.
j g
SNihMO ADORESS PQxg9 Oublin, Pennsylvania 18917 sto wu. siners. ousun. rA seets
^
GPU NElear Corporation GPU Nuclel Corporation 100 Interpace Parkway Rt. 183 & Van Reed Rd., PO Box 15152 Parsippany, NJ 07054 Reading, PA 19612-5152 ATTN:
Accounts Payable ATTN:
W. Jeitner, Ext. 5186 CUST. P.O.
LAB REPORT NO.
SEIPREET INTOICE DATE PP 06223T/Tt23 24 7C-517. 4 Complete 2/5/88 DESCRIPTION
~~~~?*;*
'J'*******;**:::
- '*****::3***::'***;*;*;*
1 pc.
7/16 - 14 x l' long Hex Capscrew
'r T
E *****i*::.d d *;*:
Sample No. OC-004, P.O. No. OP-027645
! ! * * * * *
- j : '* ** : ' * ** ** * ! : ' * : ' :
Item 4001
Reference:
GPU Lab Report #159233
- M:********;**:*:::':
Req. f5393-88-2324, Rev. 000
...d::::**:::::'*;* *:::
A.
The above referenced sample was submitted to chem ca content evaluation by Spectrochemical Analysis and found to be in conformance to ASTM A-193, Grade B7.
The resu1*ts are as follows:
ELEMENT
' REQUIRED ACTUAL Carbon 0.35 - 0.51 0.424 Manganese 0.61 - 1.14 0.98 Phosphorus 0.040 maximum 0.015 Sulfur 0.045 maximum 0.022 Silicon 0.13 - 0.37 0.30 Chromium 0.70 - 1.25 1.02 Molybdonum 0.13 - 0.27 0.26 i
i l
B.
A Tensile test was performed on the above Test Specimen and it was found to be in conformance to ASTM A-193, Gr ade B7 per the following results:
REQUIRED ACTUAL Tensile Strength 125,000 PSI 150,000 PSI Yield Strength 105,000 PSI 140,000 PSI Elongation 16.0%
17.0%
Reduction of Area 50.0%
62.0%
J C.
A Hardness test was performed on the above Test Specimen in accordance with ASTM A-193, Gr ade B7 and it was found to have a l
hardness of RC 30. (No Requirement)
All testing performed in accordance with GPU Nuclear Q.A. Program.
I Robert W. McVaugh l
MERCURY CD ATAMIN ATION During the testin, and Presiden 0
inspection, the product did not come in direct contact wth mercury or any of iti compounds nor with any y
rnercury containing devices employing a ungle boundary of cootsinmem w pues
21 m eses s
a/,
ownese, No. 3 oeo2 TER808: NET CASH 10 DAYS f "YTi SERVICE CHARGE OF 1%% PER MONTH AFTER 10 DAYS.
g / 7537FNG ##C.
gg SHIPPING ADORES 4 sto uu stMrs. Ousun. rA seest i
P.O. Box 249 Oublin, Pennsylvania 18917 SEIP TO SOLD TO GPU Niiclear Corporation GPU Nuclear Corporation 100 Interpace Parkway Rt. 183 & Van Reed Rd., PO Box 15152 Parsippany, NJ 07054 Reading, PA 19612-5152 ATTN:
Accounts Payablo ATTN:
W. Jeltner, Ext. 5186 CUST. P.O.
LAB REPORT NO.
SEIPMENT INTOICE DATE MTU2TQTt2324 7C-517.5
- Complete, 2/5/88 i
['(((({5[((((((',(([((((((
DESCRIPTION t
'I (([((((((((((((((((((((((
1 pc.
1/2 - 13 x 2" long Boavy Hex Screw Sample No. OC-005, P.O. No. OP-044606 Item i003
Reference:
GPU Lab Report #159233
[jjjjjjjjjjjjjjjjj!jjjiji i
Req. 8 5 39 3-88-23 2 4, Jtev. 000
- n- :*:::*:::::*::::**:
The above referenced sample was submitted to chemical content A.
evaluation by Spectrochemical Analysis and found to be in conformance to ASTM A-193, Grade B7.
The resurts are as follows:
l ELEMENT REQUI RED ACTUAL Carbon 0.35 - 0.51 5 767 Manganese 0.61 - 1.14 0.87 Phosphorus 0.040 maximum 0.017 l
Sulfur 0.045 maximum 0.014 Silicon 0.13 - 0.37 0.28 l
Chromium 0.70 - 1.25 0.98 Molybdenum 0.13 - 0.27 0.21 s
A Tensile test was performed on the above Test Specimen and it was B.
found to be in conformance to ASTM A-193, Grade B7 per the following results:
REQUIRED ACTUAL Tensile Strength 125,000 PSI 133,401 PSI Yield Strength 105,000 PSI 117,617 PSI 16.04 19.0%
Elongation 62.0%
Reduction of Area 50.0%
A Hardness test was parformed on the above Test Specimen in C.
accordance with ASTM A-193, Grade B7 and it was found to have a hardness of RC 30. (No Requirement)
All testing performed in accordance with GPU Nuclear Q. A. Program.
Robert W.
McVaugh MERCURY CONT AMIN ATION During the testing and Presiden inspection, the preduct did not come m direct contact h
mth mercury or any of its compounds nor Wh any
[
/
mercury containing devites employing a sing!e boundary
,y s
// 4Cal0 f f
CWNQWC4 NO. 3 0 0 0 3 315/2
- 9868 TER888: NET CASM.10 DAYS A,b,,,,,,,l i
SERVICE CHARGE OF 1% PER
{Q}
MONTH AFTER 10 DAYS.
g SHIPPING ADDRESS P.O. Box 249 Dublin, Pennsylvania 18917 sn wu, sineri. ousun. n 1nts SOLD TO SEIP 10
?lF(T~Niiclear Corporation GPU Nuciliar. Corporation 100 Intergace Parkway Rt. 183 & Van Reed Rd., PO Box 15152 Parsippany, NJ 07054 Reading, PA 19612-5152 ATTN:
Accounts Payable ATTN:
W. Jeitner, Ext. 5186 CUST. P.O.
LAB REPORT NO.
SEIPMENT IETOIC.! DATE PF5T723T7E2324 TC-517.6 Comp 3ete, 2/5/88 DESCRIPTION
~~~S******!*******!!*!!!!
- y 1 pc.
9/16 - 12 x 1" long Heavy Hex Screw
- E;;;****!****
- :
Sample No. OC-006, P.O. No. OP-028497 I'**********************!
ijj'***j'******j'*jjj'jjj Item 4001,p g.
Reference:
GPU Lab Report (159233 Req. 45393-88-2324, Rev. 000 jj'****j'****{*jjjjj'*j'i i
- 1 ::::::::::::
A.
The above referenced sample was submitted to chemical content evaluation by Spectrochemical Analysis and found to be in conformance to ASTM A-193, Grade 88M.
The results are as follows:
ELEMENT REQUIRED ACTUAL s.
Car bon 0.09 maximum 0.066 Manganese 2.04 maximum 1.45 Phosphorus 0.055 maximum 0.048 isulfur 0.035 maximum 0.028 Silicon 1.05 maximum 0.48 Nickel 9.85 - 14.15 10.86 Chromium 15.80 - 18.20 1
17.02 Molybdenum 1.90 - 3.10 2.338 B.
A Tensile test was performed on the above Test Specimen and it was l
found to',be in conformance to ASTM A-193, Grade B8M per the following results:
j REQUIRED ACTUAL Tensile Strength-75,000 PSI 91,578 PSI Yield Strength 30,000 PSI 84,210 PSI Elongation 30.0%
60.0%
Reduction of Area 50.04 70.5%
C.
A Hardness test was performed on the above Test Specimen and it was found to be in conformance to ASTM A-193, Grade 38M per the following results:
REQUIRED:
PB 170 Maximum / ACTUAL:
RB 96 All testing performed in accordance with GPU Nuclear Q.A. Program.
Robert W. McVaugh MERCURY CONTAMIN ATION During :he teans and President 1
inspection, the product did not come in direct contact q
with rnercury or any of its compounds nor with any C
mercury contaimng devices employing a single boundary
sV/f4Cal9 f M)kWNGAC9 NO. 3 0 0 0 3 21 M 9998 TERT 08: NET CASH to DAYS i,
p.,, d.
/
y' SERVICE CHARGE OF 1% PER g
/
gg MONTH AFTER 10 DAYS.
I SHIPPfMG ADDRESS P.O. Box 249 Oublin, Pennsylvania 18917 1so uu sincri. ousw. rA seest i
SOLD TO BRIP TO GPU Niiclear Corporation GPU Nuclear, Corporation 100 Interpace Parkway Rt. 183 & Van Reed Rd., PO Box 15152 Parsippany, NJ 07054 Reading, PA 19612-5152 ATTN:
Accounts Payable ATTN W.'Jeitner, Ext. 5186 CUST. P.O.
LAB REPORT NO.
SHIPRENT INTOICE DATE l
PP06223T/* it2324 TC-517.7 Complete 2/5/88 DESCRIPTIOst
~~~~~!!I! ***!
- '***.;**;**:::****;* *;* 1
, 4 1 pc.
5/8 - 11 x 6" long Heavy Hex Screw G ******
Sampic No. OC-007, P.O. No. OP-015183 ij'jjjj'jj'jjjjjj'jjjijii Item 9009
Reference:
GPU Lab Report $159233 Req. 45393-88-2324, Rev. 000
((((*{**{*(((((({'*jjjjjj
- 1*:*::*::*;*:f:::::
A.
The above referenced sample was submitted to chemical content evaluation by Spectrochemical Analysis and found to be in conformance to ASTM A-193, Grade B8M.
The results are as follows:
ELEMENT PEQUIRED ACTUAL Carbon 0.09 maximum 0.039 Manganese 2.04 maximum 1.83 Phosphorus 0.055 maximum 0.051 i
sulfur 0.035 maximum 0.024 Silicon 1.05 maximum 0.55 Nickel 9.85 - 14.15 12.71 17.62 Chromium 4 15.80 - 10.20 Molybdenum 1.90 - 3.10 2.160 B.
A Tensile test was performed on the above Test Specimen and it was found tq be in conformance to ASTM A-193, Grade B8M per the following results:
REQUIRED ACTUAL Tensilo Strength, 75,000 PSI 106,774 PSI Yield Strength 30,000 PSI 86,248 PSI Elongation 30.0%
32.8%
Reduction of Area 50.0%
74.8%
C.
A Bardness test was parformed on the above Test Specimen and it was found to be in conformance to ASTM A-195, Grade B8M per the following results:
REQUIRED:
RB 100 Maximun / ACTUAL:
RB 93 All testing performed in accordsnce with GPU Nuclear Q. A. Program.
Robert W. M
'a ug h MERCURY CONTAYIN ATION During the testing and Presiden l
inspection, the product did not come m direct conutt g
mth mercury or any et its compounds not mth any t}
rnercury conuining desitel employing a single boundary et containment uem i
}$CGl0 Of yYA9C4 N0. 3 0 0 0 3 3 W2 ****
TER888: NET CASM 10 DAYS yg SERVICE CHARGE OF 1% PER l y MONTH AFTER 10 DAYS,
[
ggy L NE E SHIPPING ADDRESS P.O. Box 249 Oublin, Pennsylvania 18917 no wu. sincri. ovu. pr esetr SOLD TO SEIP TO UPTNIIclear Corporation GPU Nuc1 Tar Corporation 100 Interpace Parkway Rt. 183 & Van Reed Rd., PO Box 15152 Parsippany, NJ 07054 Reading, PA 19612-5152 ATTN:
Accounts Payable ATTN W.'.Jeitner, Ext. 5186 CUST. P.O.
LAB REPORT NO.
SEIPMENT TETOICE DATE PP06223T/R2324 TC-517.8 Completa 2/5/88 DESCRIPTION
((***{jjjjjj*j*,,*,]*,jj**
i p'
- ::::::**:5!.;;*::
1 pc.
3/4 - 10 x 2" long Heavy 51ex Screw Sample No. OC-008, P.O. No. PO-015183 Item (002 j'j'*j'*j'***{*j'*jjjjj'j
Reference:
GPU Leb Report #159233 Req. 95393-88-2324, Rev. 000
(((({'jjjj'j'***j'j'jjjjj
!*::::h:::::**::::: i
...".... y................
A.
The above referenced sampic was submitted to chemical content evaluation by Spectrochemical Analysis and found to be in conformance to ASTM A-193, Grade B7.
The results are as follows:
ELEMENT REQUIRED ACTUAL Carbon 0.35 - 0.51 0.439 Manganese 0.61 - 1.14 0.94 Phosphorus 0.040 maximum 0.021 Sulfur 0.045 maximum 0.018 i
silicon 0.13 - 0.37 0.29 Chromium 0.70 - 1.25 0.99 Molybdenum 0.13 - 0.27 0.17 i
s, B.
A Tensile test was performed on the above Test Specimen and it was found to be in conformance to ASTM A-193, Grade B7 per the following results:
REQUIRED ACTUAL Tensile Strength 125,000 PSI 139,380 PSI 105,000 PSI 128,318 PSI Yic1d Strength Elongation 16.0%
18.9%
Reduction of Area 50.04 57.7%
C.
A Hardness test was performed on the above Test Specimen in accordance with ASTM A-193, Grade B7 and it was found to have a hardness of RC 30. (No Requirement)
All testing performed in accordance with GPU Nuclear Q.A. Program.
R bert W. McVaugh MERCURY CONT AMIN ATION Ouring 1he testina and Presideh ir.spection, the product did not came in direct contact R,
.mth mertury or any of its compounds not wth any mercury containing devices employing a singte boundary J
s....- w.,
[g gy/,
W
- m<>we, No. 3 oaa3 2w2 m TER888: NET CASH 10 DAYS t{)SI SERVICE CHARGE OF 1%% PER
/
MONTH AFTER 10 DAYS, 8
// q l/ gg SHIPPING ADDREk y
yngryNoINc 1
sto usu. sinnri, ous.m. rr,se,r P.O. Box 249 Oublin, Pennsykenis 18917 SEIP TO SOLD TO GPU NTelear Corporation GPU Nucleir Corporstion 100 Interpace Parkway Rt. 183 & V3n Reed Rd., PO Box 15152 Parsippany, NJ 07054 Reading, PA 19612-5152 ATTN Accounts Payable ATTN:
W. Joitner, Ext. 5186 CUST. P.O.
LAB REPORT NO.
SHIPMENT INTOICE DATE PP06223T/R2324 TC-517.9
- Complete, 2/5/88
- '12!!!
- ?':* :::
DESC11PTION
.:~ :" :: * ::*;"?".* ::::
I I 1 pc.
7/8 - 9 x 3" long Heavy Hex Screw
- *:*:'* *:f**:'*:':*:
Sample No. OC-009, P.O. No. OP-026855 Item 6004 jj'*}*j"*****j'*****jjjj'
- 4
Reference:
GPU Lab Report #159233
.....g..................
Req. 45393-88-2324, Rev. 000
((**j.j'*****,*jjj'jjjj,j
- 1:::::::::::::
- f::::::l:::
A.
The above referenced sampic was submitted to chem ca content evaluation by Spectrochemical Analysis and founp to be in conformance to ASTM A-193, Grade B7.
The results are as follows:
ELEMENT REQUIRED ACTUAL Carbon 0.35 - 0.51 0.398 Nang anese 0.61 - 1.14 0.89 Phosphorus 0.040 maximum 0.032 Bulfur 0.045 maximum 0.021 silicon 0.13 - 0.37 0.27 Chromium 0.70 - 1.25 0.93 0.13 - 0.27 0.17 Molybdenum o
A Tensile test was performed on the above Test Specimen and it was B.
found to be in conformance to ASTM A-193, Grade B7 per the f ollowing results:
REQUIRED ACTUAL Tensile Strength 125,000 PSI 140,816 PSI Yield Strength 105,000 PSI 129,081 PSI Elongation 16.0%
19.0%
Reduction of Area 50.0%
59.0%
A Hardness test was performed on the above Test Specimen in C.
accordance with ASTM A-193, Grade 87 and it was found to have a i
htedness of RC 30. (No Requirement) j All testing performed in accordance with GPU Nuclear Q.A. Program.
l Robert W. McVaugh MERCURY CONT AMIN ATION During the tr.mg and President inspection, the product did not come m direct contact
\\L C
wth mercury or any of its compounds not with any LO D.
7 mercury containing devices employing a single boundary
\\, _
~
_A LTraadL212 84'satuag
MMGM4 NO.
WlfGl4 f 3W2 M 3 nnn3 TER888: NET CASH 10 DAYS f'?"g SERVICE CHARGE OF 1% PER f' [M MONTH AFTER 10 DAYS, g
SHIPPING ADDRESS
'to wu. STRtri. ovem. 9A teen PQxg9 Oublin, Pennsylvania 18217 GPU NiilElear Corporstion GPU Nuc1E r Corporation 100 Interpace Parkway Rt. 183 6 Van Reed Rd., PO Box 1$152 1
Parsippany, NJ 07054 Reading, PA 19612-5152 ATTN Accounts Payable ATTN:
W. Jeitner, Ext. 5186 CUST. P.O.
LAB REPORT NO.
SMIP1 TENT INTOICE DATE PP0622E/R2324 TC-517.10 Complate 2/5/68
N ::::::::::: T*! ;:::
ossC11PTION
- ::;;~;;~;*;*:
'c 1 pc.
1 - 8 x 2-1/2" long Heavy Bex Screw t
Sneple No. OC-010, P.O. No. OP-031092 Item i013
Reference:
GPU Lab Report (159233
- * :::: *;* X *;*:::'*:
Req. 45393-88-2324, Rev. 000
- t;;;
- ::*:::::
- '*:~~*::*;*:::** **:::::
The above referenced sampic was submitted to chem ca content A.
evaluation by Spectrochemical Analysis and found to be in conformance to ASTM A-193, Grade BBM.
The resuits are as follows:
ELEMENT REQUIRED ACTUAL Carbon 0.09 maximum 0.050 Manganese 2.04 maximum 1.45 Phosphorus 0.055 maximum 0.041 sulfur 0.035 maximum 0.017 Bilicon 1.05 maximum 0.66 Nickel 9.85 - 14.15 10.61 Chromium 15.80 - 18.20 16.50 1.90 - 3.10 1
2.145 Molybdenum i
A Tensile test was performed on the above Test Specimen and it was l
B.
found to,be in conformance to ASTM A-193, Grade BBH per the I
following results:
Tensile Strength 75,000 PSI 91,578 PSI Yield Strength 30,000 PSI 63,157 PSI 30.0%
58.0%
Elongation 80.0%
i Reduction of Area 50.04 A Hardness test was performed on the above Test Specimen and it C.
was found to be in conformance to ASTM A-193, Grade 58M per the following results:
REQUIRED:
RB 96 Maximum
/
ACTUAL:
RB 96 All testing performed in accordance with GPU Nuclear Q A. Program.
Robert W. McVaugh MERCURY CONT AYIN ATION Dur;n;the testing and Presiden inspection, the product did not come in direct contact mth mercury or any of its compownds nor mth any mercury contain;ng decces employing a single boundsty wn.onero s.weva
02/16/98 ad 18 GPU SECU!CE CORPORATION READING FC,ad4 P002/003
]
Y Y
No.I' ' ' ' '
tw244 tee.
TSftS88: NBT OMM.10 ItAYS rn.
SERVICE CHARGE OF 1%% PER
(
MONTH AFTF".10 DAYS, gg 1
- rssimome, SHIPMNO AD08 TBS 4 ise imu, statst. ovouN. pA seeif P.O. Sor 248 Dubun, Penneyhenia f a9f 7 SEIP TO i
SOLD TO GPU Nuclear Corporation GPU'I'Iclear Corporation Rt. 183 & Van Reed 1d., PC sox 15152 100 Interpace Parkway Parsippany, NJ 07054 Reading, PA 19612-5152 ATTN:
Accounts Payable ATTH:
W. Joitner, Ext. 5186 CUST. P.O.
LAN RSPORT NO.
SEIPMENT INVOICS DATE P P 0 6 2 23T/R2 3 2 4 --~~TC-517.11 Complete 2/5/s8
[',!j
{((I(('I[(({j{
DESCRIPTION 1 pc.
1/4 - 20 Heavy Hex Nut, Sample No. OC@l) i'iiiiiii;i',iiii.
P.O. No. OP-044226, Item #001
,jjj.j jjjjjjjjjjjjjjjjjjj Reference GPU Lab Report $159233 Req. $5393-88-2324, Rev. 000
- ~:::';:::::::
.a.....................
......:::~:!*!!!:*::::::
i' I
- CORRECTED CERTIFICATION (2/10/88)
The above referenced sample was submitted to chemical content
(
A.
evaluation by Wet chemical Analysis and found to be in conformance i
to ASTM A-194, Grade SM per ASTM A-484, Table fl.
The results are as follows:
ELEMENT REQUIRED ACTUAL Carbon 0^.09 maximum 0.05 l
Manganese 2.04 maximum 1.03 Phosphorus 0.045 maximum 0.020 0.035 maximum i,
0.015 Sulfur Silicon 1.05 maximum 0.45 Nickel 9.85 - 14.15 12.21 Chr omiujn 15.80 - 18.20 17.55*
I Molybdenum 1.90 - 3.10 2.63 A Hardness test was performed on the above Test Specimen and it B.
was found to be in conformance to ASTM A-194, Grade 8M per the I
following results:
REQUIRED:
/
ACTUAL:
RB 104 l
l All testing performed in accordance with GPU Nuclear 0. A. Program.
Robert W. McVaugh MERCURY CONT AMIN ATION. During the testin,.nd Preaiden inipection, the preduct did not corn in direct contact vnth mercury on any of its cornpounds not with eny
_ r _, u,,t.;n,,,d..... -.,n,..in,,,, _ d.,,
gF a x
[a,/
gg/,
Y ewn=c, No. 3 oooa tw24m TERMS: NET CASN.10 DAYS 9
/ p[73 SERVICE CHARGE OF 1% PER
/
,d
/
f MONTH AFTER to DAYS.
i/ g g SHIPPING ADDRESS sio wu, sintri..nsw rs seest P.O. Box 249 Oublin. Pennsytynnia 18917 80th TO SEIP TO GPU NW iear Corporation GPU'Tuc1Ur Corporation 100 Interpece Parkway Rt. 183 & Van Reed Rd., PO Box 15152 Parsippany, NJ 07054 Reading, PA 19612-5152 ATTH:
Accounts Payablo ATTN:
W..Jeitner, Ext. 5186 CUST. P.O.
LAB REPORT NO.
SEIPMENT INVOICE DATE PP0622T67R2324 TC-517.12 Co:cple t e 2/5/88
- "':::::U::: :::::::::
DEsem PTIOu 1 pc.
5/16 - 18 Heavy Hex Nut, Sample No. OC 01'2 W ;;** **** :.H.:* :*:
P.O. No. OP-031346, Item 1010
- jjjjjjjjjjj'j'jjj*jjjjjj
Reference:
GPU Lab Report 4159233
.......o.....
Req. 45393-88-2324, Rev. 000 jj'j'*j'{****{j*j'*j'jj*j
':...~. :::::::::::::: * ::::
A.
The above referenced sample was submitted to chemical content avslustion by Spectrochemical Analysis and found to be in conformance to ASTM A-194, Grade 8M per ASTM A-484, Table fl.
The results are as follows:
ELEMENT REQUIRED ACTUAL Carbon 0.09 maximum 0.038 Hsngsnase 2.04 maximum 1.19 0.055 maximum 0.033 Phosphorus e
0.010 Sulfur 0.035 maximum Silicon 1.05 maximum 0.46 Nickel 9.85 - 14.15 12.70 Chr omiu:n 15.80 - 18.20 18.07 MolybdenLm 1.90 - 3.10 2.151 A Hardness test yas performei on the above Test Specimen and it B.
was found to be in conformance to ASTM A-194, Grade SM per the following results:
REQUIRED:
/
ACTUAL:
RB 105 i
All testing por formed in accordance with GPU Nuclear Q. A. Program.
Robert W. McVaugh MERCURY CONT AMIN AT!ON Durhy the.utm and Prcsiden inspection the product did not come in direct contact b
mth m,rtury or any of its tempounds not eth any m.,,,..n1 3 d.m.,,
,,o... ~,,0.,d.y
- 4. a
ti m e sees en/
g4 cwyra,,c, No. 2 ' ' ' '
TER888: MST CASH = 10 DAYS j
L p. -
SERVICE CHARGE OF 1%% PER
[
I f,;
MONTH AFTER 10 DAYS.
y g
SHIPPING ADDRESS P.O. Sox 249 Dublin. Pennsykenia 18917 sto uu sinsti. ovem. rs seets SOLD 'to SEIP TO GPU NE lear Corporation GPU Nuc1Er Corporation 100 Interpacc Parkway Rt. 183 & Van Reed Rd., PO Box 15152 Parsippany, NJ 07054 Roading, PA 19612-5152 ATTN:
Accounts Payable ATTN:
W. Jeitner, Ext. 5186 i
CDtsT. P.O.
LAB REPORT MO.
SEIPMENT TETOICE DATE PW672TGR2324
'tC-517.13 Complete 2/5/88
I @ !* :~i!****I *::::
DESCRIPt M
- * ::"':* :: * * * :: * * ? : * ::::
~
1 pc.
3/8 - 16 Hes licx Nut, Sampic No. OC 413f M
- :: 'C M :::
P.O. No. OP-d 3056, Item 6001 ijjjjjyjjjjj,j[j'jjj'{.jjj
- '* **;**::**:!(:'* **:::
Reference:
GPU Lab Report 1159233 s
.. m *.........
Req. 45393-88-2324, Rev. 000
[*j'*{,j;{*j((((*jjjj A
- ' * : * *;f:::*:::::!* ; *::::::
....a':
A.
The above referenced sample was submitted to chtmical content evaluation by Spectr'ochemical Analysis and found to be in conformance to ASTM A-194, Grade 28.
The results are as follows:
A Hardness test'was performed on the above Test Specimen and it was found to be in conformance to ASTM A-194, Grade 2H per the following results:
REQUIRED:
RC 24 - RC 38
/
ACTUAL:
RC 29 l
l l
All testing performed in accordance with GPU Huclear Q. A. Program.
j r
Robert W. McVaugh MERCURY CONT AMIN ATION Dm
- tm n; are Presiden l
mspection, the product did not come m direct contact C
l witti mercury or any ct its compounds not wth any D
- mercury containing devices employing a single boundary U
of tentsinment.
- ~ - - - -
}
1 p/
- pca/,
&ma c, No. 3 oeo2 21 9249-9808 TERMS: NET CASH - 10 DAYS 10 SERVICE CHARGE OF 1%% PER
/
/
MONTH AFTER 10 DAYS.
,s g
SHIPMNG ADOFIESS sto u\\LL sintei. ousesn, pA seenr P.O. Box 249 Oublin, Pennaylvania 18917 SEIP TO SOLD TO GPU NuclU r Corporation GPU NElear Corporation 183 & Van Reed Rd., PO Box 15152 Rt.
100 Interpaco Parkway Reading, PA 19612-5152 Parsippany, NJ 07054 ATTN W. Jeitner, Ext. 5186 ATTN:
Accounts Payabla CUST. P.O.
LAB REPORT NO.
SEIPMENT INVOICE DATE PP062256/R2324 TC-517.14 Complete 2/5/88 DESCRIPTION
- ~~U*!!!**P!!:**f*I!!!*
- ~~ M.***;************::*:
1 pc.
7/16 - 14 Heavy Hex Nut, Sample No.,0C-pif
- *;;;;;;*;1*
- !!!
P.O. No. OP-027646, Item 6001 3;;;*::
Refctence:
GPU Lab Report #159232
!!!:::!!!: E :!!!!!!!!!!!
Req. 95393-88-2324, Rev. 000 l
- I :*::::::::::
- M M ;;;;;;;
The above referenced sample was submitted to cfremical content evaluation by Spectrochemical Analysis and found to be in
/
A.
The results are as follows:
conformance to ASTM A-194, Grade 28.
ACTUAL ELEMENT REQUIRED 0.40 minimum 0.473
. Carbon 0.029
' Phosphorus 0.04 maximum 0.05 maximum 0.044 Sulfur it A Hardness test Nas perferwed on thegabove Test Specimen and
/
was found to be in conformance to ASTM A-194, Grade 2B per the B.
following results:
REQUIRbD RC 24 - RC 3B
/
ACTUAL:
RC 32 Q.A. Program.
All testing performed in accordance with GPU Nuclest i
l Robert W. McVaugh President MERCURY CONT AMIN ATI0f, Dunng the 'esting and inspection, the product did not corne in direct contact b
uth mercury or any of its compounds nor with any marcury containing devices emp'oying a singte boundary AytwomtttD S4MMe
h//gg/,
[
yfg
[ g3 0 0 0 3 215/246 seos TER6SS: NIET CASH 10 DAY 3 g
SERVICE CHARGE OF 1%% PER
/
g MONTH AFTER 10 DAYS.
j
/
g SHIPPING ADDRESS sto utu. STREET.ouuuan PA sse11 P.O. Box 249 Dublin, Pennsylver,ia 18917 SHIP TO SOLD TO GPU Nuc1U r Corporation GPU NE lear Corporation 183 & Van. Reed Rd., PO Box 15152 Rt.
100 Interpace Parkway Reading, PA 19612-5152 Parsippany, NJ 07054 ATTN W. Jeitner, Ext. 5186 ATTN Accounts Payable SHIPMENT INVOICE DATE CUST. P.O.
LAB REPORT NO.
PP062256/R2324 TC-517.15 Completc 2/5/88 I***(((((((({jj'j'jj(((({
DESCRIPTION
- ...::::::::::::.:::.:::c 1 pc.
1/2 - 13 Heavy Hex Nut, Sample No. CC-015 I.:::::::::::::::;;;;;;;;;;;
- "t;;
- ;;;
- ;:;:;;;:::::::::::
P.O. No. OP-050794, Item f001
- i:::
GPU Lab Report i159233
Reference:
Req. 45393-88-2324, Rev. 000'
- !:::::::::::::n 1.:..' :::::::::
44...........
The above referenced sample was vibmitted to chemical content evaluation by Spectrochemical Analysis and found to be inThe results are as
(
A.
conformance to ASTM A-194, Grade 28.
ACTUAL REQUIRED ELEMENT 0.404 0.40 minimum Carbon 0.015 0.04 maximum Phosphorus 0.034 0.05 maximum Sulfur A Hardness test Gas performed on the above Test Specimen and it in conformance to ASTN A-194, Grade 28 per the B.
was found to be following results:
REQUIREf>:
RC 24 - RC 38
/
ACTUAL:
RC 25 Prograt.
All testing performed in accordance with GPU Nuclear Q.A.
Robert W. McVaugh MERCURY CONT AMIN ATION Duri g the testin; and Presiden inspection, the product did net come in direct contact C
D with mercury or,any of its compounds nor with any y_
c mercury containing devices employing a single boundary wT> oam scurvat Gf Gontainment.
N" s -.W,.i 8% C_f.'_ ___ _ _ ~ - - - - - - _ - -
2w2*sess p/g*
g/p yaps c, Noe aoooa TEhMS: NET CASH 10 DAYS SERVICE CHARGE OF 1%% PER
////
/
MONTH AFTER 10 DAYS.
/
gg SHIPPING ADDRESS 120 wiLL STREET, DUSLIN. PA 18017 P.O. Box 249 Oublin, Pennsy/vania 18917 SHIF TO SOLD TC GPU Nuclear Corporation GPU NE lear Corporation 183 & Van; Reed Rd., PO Box 15152 Rt.
100 Interpace Parkway Parsippany, NJ 07054 Reading, PA 19612-5152 ATTN W. Jeitner, Ext. 5186 ATTN Accounts Payable INVOICE DATE CUST. P.O.
LAB REPORT NO.
SHIPMENT PP062256/R2324 TC-517.16 Complete 2/5/88 DESCRIPTION
~ ! *. * * * : : * * * * ; * " * *.* U : : :
S ainpl e No. OC-016 i *
- U U* * * * * * ;
- U U U * * * *
- U 1 pc.
9/16 - 12 Heavy Hex Nut,
- j'****',*jj'*j';j';j P.O. No. OP-028711,' Item #002
- : : : :! :": : :+ :+ :n: U. "::. :. :m
Reference:
GPU Lab Report (159233 UUUU UUUUUU M*
Reg. 15393-88-2324, Rev. 000 i
- "" ::::C:::::::::::::
'M M U:::::::::::::::::::
The above referenced sample was submitted to che'mical content evaluation by Spectrochemical Analysis and found to be in A,
The conformance to ASTM A-194, Grade 8M per ASTM A-484, Table fl.
y' I
results are as follows:
ELEMENT REQUIRED ACTUAL Carbon 0.09 maximum 0.044 2.04 maximum 1.24 f
Manganese Phosphorus 0.055 maximum 0.031
(
< 0.035 maximum 0.020 Sulfur Silicon 1.05 maximum 0.56 Nickel 9.85 - 14.15 10.00 Chromium,
15.80 - 18.20 16.81 Holybdenum
).90 - 3.10 2.004 A Hardness test was performed on the above Test Specimen and it it conformance to ASTM A-194, Grade 8M per the B.
was found to be following results:
REQUIRED:
/
ACTUAL:
RB 78 testing performed in accordance with GPU Nuclear Q.A. Program.
All l
Robert W. McVaugt' l
M.EHCJRY CONTAMIN ATION Durin;the testing and President n.pection, the product did not come m direct contact b
mth mercury or any of its compounds not mth any meicury containing devices employing a singfe boundary
~
avmomno swruas j
l
Wen a/e ey!' Wen /ma.weN0. 3 0 0 0 3 swa**se TERMS: NET CASH 10 DAYS I
' 7 00 SERVICE CHARGE OF 1%% PER MONTH AFTER 10 DAYS.
j g
SHIPPING ADDRESS P.O. Box 249 Dublin, Pennsylvania 18917 120 m,uu. STREET, DuBUN, PA 18811 SOLD TO SHIP TO GPU NE lear Corporation GPU Nuc1H r Corporation 100 Interpace Parkway Rt. 183 & Van Reed Rd., PO Box 15152 Parsippany, NJ 07054 Reading, PA 19612-5152 ATTN:
Accounts Payable ATTN:
W. Jeltner, Ext. 5186 CUST. P.O.
LAB REPORT NO.
SHIPMENT INVOICE DATE PP062256/R2324 TC-517.17 Complete 2/5/88 DESCRIPTION
[*]-((((*{**[**;{**{*((((
' ~
n, :,::n::::::n = :::::
1 pc.
5/8 - 11 Heavy Hex Nut, Sample No. OC-011
+ + +++ ** **
P.O. No. OP-043147, Item f001 j '
- j *;*;* *;* j { j* j '
- j *;*;j { * *,{ {
- X::::::::*:::::::::*:::
Reference:
GPO Lab Report 6159233
+++++
+ +. *** -
-+-
Req. 15393-88-2324, Rev. 000
- ((((**{*((***((((*(((({
- t:::::::::::::::::::::
'.".:.l.i i..: :. *. :. : :. :. :. :. :. :. :. :. :..
A.
The above referenced sample was submitted to e emical content
\\,
evaluation by Spectrochemical Analysis and found to be in conformance to ASTM A-194, Grade 8M per ASTM A-484, Table 91.
The results are as follows:
' ELEMENT REQUIRED ACTUAL Carbon 0.09 maximum 0.073 Manganese 2.04 maximum 1.54 0.026 0.055 maximum i
Sulfur O.035 maximum O.010 Silicon 1.05 maximum 0.72 Nickel 9.85 - 14.15 10.85 Chromium 15.80 - 18.20 17.09 Molybden'um 1.90 - 3.10 2.184 I
B.
A Hardness test #as performed on the above Test Specimen and it l
was found to be in conformance to ASTM A-194, Grade 8H per the I
following results:
REQUIRED:
/
ACTUAL:
RB 92 All testing performed in accordance with GPU Nuclear Q.A. Program.
Robert W. McVaugh MERCUR f CONT AMIN ATION - During the testmg and Preside t inspection, the product did not come m direct contact with mercury or any of its compounds nor with any j
mercury containing deWees employing a single boundary f*
m n
l
%// wa/,
M e maec, No. 3 ooo3 215/2+ essa TERISS: NET CASH.10 DAYS g
,y
/
/
SERVICE CHARGE OF 1%% PER I
i MONTH AFTER 10 DAYS.
SHIPPING ADDRESS P.O. Box 249 Oublin, Pennsylvania 18917 120 wu. siREET, oueusn. PA seest SOLD TO SHIP TO GPU NElear Corporation GPU Nucle r Corporation 100 Interpace Parkway Rt. 183 & Van Reed Rd., PO Box 15152 Parsippany, NJ 37054 Reading, PA 19612-5152 ATTN:
Accounts Payabic ATTN:
W. Jeitner, Ext. 5186 CUST. P.O.
LAB REPORT 30.
SBIPMENT IEVOICE DATE PP0622TE7R2324 TC-517.f8 Complete 2/5/88
- ,,*****jjj'*******j'*;***(({
DESCRIPTION 1 pc.
3/4 - 10 Heavy Rex Nut, Sample No. OC-D14~
P.O. No. OP-044376, Item t002
- *
- j, {
- j j ' j '
- j j '
- j *. *. j '
- j '
Reference:
GPU Lab Report (159233
((****jjjj'.jj'***j'*j'*j{
Rcq. 45393-88-2324, Rev. 000
.....~....................
- ~:N!;::::::::::
- ~~.*! :*::*':::::* :** *
- i::::::::::::
A.
The above referenced sample was submitted to c'hemical conto'nt evaluation by Spectrochemical Analysis and found to be in conformance to ASTM A-194, Grade 28.
The results are as follows:
ELEMENT REQUIRED ACTUAL
. Carbon 0.40 minimum 0.412 Phosphorus 0.04 maximum 0.015 Sulfur 0.05 maximum 0.014 B.
A Hardness test',was performed on thelabove Test Specimen and it was found to be in conformance to ASTM A-194, Grade 2B per the following results:
REQUIRf.D:
RC 24 - RC 38
/
ACTUAL:
RC 29 All testing performed in accordance with GPU Nuclear Q.A. Program.
Robert W. McVaugh ME RCURY COS'T AYiN ATION During the testing and President inspection, the product did not come in direct contact with mercury or any of its compounds nor with any hbN N
mercury containing devices empicying a single boundary
_ _ _.. 0.! C o.g t, sin m39 t._
yyco s9gs
215/24&ses g ggg/g yma.c, No. 3 ooa3 g
TERMS: NET CASH.10 DAYS
/
SERVICE CHARGE OF 1% PER I
MONTH AFTER 10 0AYS.
LABORATORY SHIPPING ADDRESS
'to wu. sinEET. Ououm. rA seetr P.O. Box 249 Oublin, Pennsylvania 18917 SOLD TO SEIP TO GPU NE lear Corporation GPU NuclH r Corporation 100 Interpace Parkway Rt. 183 & Van Reed Rd., PO Box 15152 Parsippany, NJ 07054 Reading, PA 19612-5152 ATTN:
Accounts Payable ATTN:
W.~.Joitner, Ext. 5186 CUST. P.O.
LAB REPORT EO.
SHIPN"3fT IETOICE DATE PF062256/R2324 TC-517.19 Complett 2/5/88
- !!!.*.***l***!*
DESCRIPTION
!!*;*'* ::*;*::*?P.*::::::
1 pc.
7/8 - 9 Heavy Hex Nut, SampleNo..OC-9k9 'A
!!!!!~!!!*!!*!!"
~~****!
- j j ' { * * * * * * * *
- j ' * * *. j j j j '
P.O. No. OP-043556, Item 4001
Reference:
GPU Lab Report #159233 Req. 15393-88-2324, Rev. 000
- { !**
- :I**!* ::::::
A.
The above referenced sample was submitted to ch'emical content evaluation by Spectrochemical Analysis and found to be in conformance to ASTM A-194, Grade 28.
The results are as follows:
ELEMENT REQUIRED ACTUAL Carbon 0.40 minimum 0.409 Phosphorus 0.04 maximum 0.019 Sulfur 0.05 maximum 0.017
/-
B.
A Hardness test 9ao performed on the'*above Test Specimen and it was found to be in conformance to ASTM A-194, Grade 2H per the following results:
REQUIRED:
RC 24 - RC 38
/
ACTUAL:
RC 26 All testing performed in accordance with GPU Nuclear Q. A. Program.
Robert W. McVaugh MERCURY CONT AMIN ATION Dut.ng th. testm and Preside t inspection, the product did not come in direct contact with mercury or any of its compounds not with any M
mercury containing devices empl:,ying a dngte boundary
$4pa/, [ [gemaac, NO. 3 ooo3 215/249. sees Taness: NET CASH.10 DAYS SERVICE CHARGE OF ib% PER
/
MONTH AFTER 10 DAYS.
1
/
g E
SHIPPING ADDRESS P.O. Box 249 Oublin, Pennsylvania 18917 sto usu. sTRtti. ousesn. or teesi SOLD TO SHIP TO GPU NElear Corporation GPU NuclHr Corporation 100 Interpace Parkway Rt. 183 & Van Reed Rd., PO Box 15152 Parsippany, NJ 07054 Reading, PA 19612-5152 ATTN Accounts Payable ATTN:
W. Jeitner, Ext. 5186 CUST. P.O.
LAB REPORT NO.
SEIPMENT '
INTOICE DATE PP0622T37R2324 TC-517.20 Complete 2/5/88 DESCRIPTION j((((((j((((((((}(((({j{j
= :::::::::: m..u :::::
1 pc.
1 - 8 Heavy Hex Nun, Sample No. OC-020 t P.O. No. OP-Oll875, Item 6001
- t
- :::::::::*;**;*::::
Reference:
GPU Lab Report #159233 Req. 65393-88-2324, Rev. 000
- !***I :::*I;X **! *!**
A.
The above referenced sample was submitted to chbmical content ovaluation by Spectrochemical Analysis and found to be in corformance to ASTM A-194, Grade SM per ASTM A-484, Table fl.
The results are as follows:
ELEMENT REQUIRED ACTUAL Car bon 0.09 maximum
'0'053 Manganese 2.04 maximum 1.70 Phosphorus 0.055 maximun 0.031 0.035 maximum
,(
0.015 Sulfur e
Silicon 1.05 maximum 0.25 l
Nickel 9.85 - 14.15 10.07
- Chromium, 15.80 - 18.20 16.10 Molybdenum 1.90 - 3.10 1.927 B.
A Hardness test was performed on the above Test Specimen and it was found to be in conformance to ASTM A-194, Grade 8M per the following results:
REQUIRED:
/
ACTUAL:
RB 94 All testing performed in accordance with GPU Nuclear Q.A. Program, 1
Robert W. McVaugh MERCURY CONT AMIN ATION During the test;ng and res W M J
inspection, the product did not come in direct conuct C
i l
with mercury or any of iti compounds nor with any l
mercury containing devices employing a single boundary auteto sostvaa
--- =, Noj 3 0
0 0
3 p
2mme w.......
senvica Amos or m man f
MONTH EM0 DAYS.
i g
mg geog TESTI M M 1m Wiu.eTRest. Oveuw. pa iasif P.O. Sox 249 Oub#n, Pennsyfvenia f 49f 7 BRIP TO SOLD To GPU Nucle r Corporation GPU NE lear Corporation 183 & Van Reed Rd., PO Bos 15152 Rt.
100 Interpace Parkway Reading, PA 19612-5152 Parsippany, NJ 07054 W. Joitner, Rat. 5186 ATTN:
ATTN:
Accounts Payable INTOICE D&fE SEIPEENT
CUST. F.O.
i PP06 223T/li232 4 7C-517. 21T-Complete
.. :~::::::..,,;;;:::
DESCRIPTICE
. 'T:*::::'*..:.~;..:::
- c. -
-- ~~ -**
' w 1/2 - 13 x 2-1/2" long Hos Oepeetow i
Sample No. 0C-021, P.O. No. 07-041325 '
~~::::::::::'J::::::::::
1 pc.
- t:::-:::::
GPU Lab Report #159233 Req. #5393-G8-2324, Rev. 000
Reference:
- - 1:::: ::::::.:::.:
- comancTsD cunTIFICArtou (2/10/08)_
The above referenced sample was submitted to chemi A.
The results are NOT to be in conformance to ASTM A-193, Grade J8.
as follows:
ACTUAL REQUIRED ELEMENT 0.07e 0.05 maximum 1.18 carbon 2.04 maximum Manganese 0.055 maximum.
0.029 Phosphorus 0.035 maximum 0.024 sulfur i
1.05 maximum 0.39 Silicon l
7.85 - 10.05 8.80 Nickel 17.58*
Chrornium 17.80,- 20.20
.1. 11 0
-m
. Coppe,t
, Copper content unusually high.
f NOTE:
A Tensile test was performed on the above Test Specimen and it was found **NOT to be in conformance to ASTM A-193, Grade 88 per the B.
following results:
ACTUAL i
RECUIRED 75,000 PSI 107,942 PSI l'
Tensile Strength 30,000 PSI 85,539 PSI Yield Strength
- 25.6%
30.0%
Elongation 50.0%
73.1%
Reduction of Aroa Robert W. McVaugh ME RCURY CONT AMIN ATION. Ourmg the testing and Preside t inspection, the product did not come in direct centset
(
with matcury or sny of its compounds nor with any owicury containing devices employing a single boundary of containment.
(4F THl$ FORM.
h cg/g
- cwngsc, No.s o o o a 2w2+ m TERASS: NET CASH 10 DAYS 7,,
SERVICE CHARGE OF t%% PER
[
. /
MONTH AFTER 10 DAYS.
f g
I I TSB11NGINC, SHIPPING ADORES 8 sto wu STREET. DusuN, PA 18011 P.O. Box 249 Oublin, Pennsylvania 18917 SOLD TO SHIP TO GPU NE lear Corporation GPU NuclH r Qorporation 100 Interpace Parkway Rt. 183 & Van Reed Rd., PO Box 15152 Parsippany, NJ 07054 Reading, PA 19612-5152 ATTN:
Accounts Payable ATTN:
W. Jcitner, Ext. 5186 CUST. P.O.
LAB REPORT NO.
SHIPMENT INTOICE DATE PP06223T/R2324 TC-517.21s Complete 2/5/88
'I*****!!!*!**!*******!!*
DESCRIPTION I I !!!***;* ** !!!!U****
1 pc.
1/2 - 13 x 2-1/2" long Hex Capscrew
- U***
Sample No. OC-021, P.O. No. OP-041325
Reference:
GPU Lab Report (159233 l
- !****MI*U****!*M*
I U..
- U.. !
- U.. * !.
- U.. U Req. 45393-88-2324, Rev. 000
- U:**::::::::
- W.;;;;;;;; U M::::::*
C.
A Hardness test was performed on the above Test"Specimen and it was found NOT to be in conformance to ASTN A-193, Grade B8 per the following results:
REQUIRED:
RB 100 Maximum / ACTUAL:
RC 35*
i l
/
s,
/
s, l
l All testing per formed in accordance with GPU Nu:loar Q. A. Program.
d Robert W. McVaugh MERCURY CONT AMIN ATION During he te ting and Presiden inspection, the product did not came in direct contact with mercury or any of its compounds not with any mercury containing devices employing a single boundary
~
~... - - _,.
$/pfca/e of h/wmance N0, mm TERMS: NET CASH.10 DAYS l?
SERVICE CHARGE OF 1%% PER
/
- I MONTH AFTER 10 DAYS.
/
SHIPPING ADDRESS 1to u LL $TREET. DUBLIN, PA ia017 P o Aar 249 Dublin, Pennsylvania f 8977 5000 To SHIP TO GPU Nuclear Corporation GPU Nucloir Corporation 100 Interpace Parkway Rt. 183 & Van Reed Rd., PO Box 15152 Parsippany, NJ 07054 Reading, PA' 19612-5152 ATTN:
Accounts Payable ATTN:
W. Jeitner, Ext. 5186 CUST. P.O.
LAB REPORT NO.
SBIPMENT INTOICE DATE PP06223T/R2324 TC-517.22 Complete 2/5/88
- ' *.* * ; * ; *r* * ! * : U * * *T* ! ! ! !
DESCRIPTION
- .*
- *
- *
- 1113;;*;*
1 pc.
5/16 - 18 x 1-1/2" long Hex capscrew r...
i Sample No. OC-022, P.O. No. OP-002131 '
Item #001 Reference GPU Lab Report 1159233 Req. f5393-88-2324, Rev. 000
- {**((*{*{*{**{*((*!*{***
.;;.11 :::::::::: *******
A.
The above referenced sample was submitted to chem cal content evaluation by Spectrochemical and Wet Chemical Analysis and found NOT to be in conformance to ASTM A-193, Grade 37.
The results are as follows:
ELEMENT REQUIRED TCTUAL Carbon 0.35 - 0.51 0.33*
Manganese 0.61 - 1.14 0.97 l
Phosphorus 0.040 maximum 0.019 Sulfur 0.045 maximum 0.016 Silicon 0.13 - 0.37 0.31 l
Chromium 0.70 - 1.25 1.06 0.21 0.13 - 0.27 l
^
/
B.
A Tensile test was performed on the above Test Specimen and it was found to be in conformance to ASTM A-193, Grade B7 per the following results:
REQUIRED ACTUAL Tensile Strength 125,000 PSI 145,408 PSI 105,000 PSI 139,030 PSI Yield Strength clongation 16.0%
20.3%
Reduction of Area 50.0%
63.2%
C.
A Hardness test was performed on the sbove Test Specimen in accordance with ASTM A-193, Grade B7 and it was found to have a hardness of RC 29. (No Requirement)
All testing performed in accordance with GPU Nuclear Q.A. Program.
Robert W. McVaugh MERCURY CONT AMIN ATION During the testeg and President mipection, the product did not come m direct contact D
with matcury or any of its compounds nor with any T
. mercury containing devices employing a tingle boundary g
<f autem sourvas of containment.
$4)$ca/e /
$ /wmance NO. 3 0 *
- 1,s m a TERMS: NET CASH.10 DAYS
/ /
SERVICE CHARGE OF 1% PER i
7 I
MONTH AFTER 10 DAYS.
fljjp /
g SHIPPING ADDRESS PQg g Dublin, Pennsylvania 1891 SEIP TO GPU NIiiilear Corporation GPU Nuc1TJr Corporation 100 Interpace Parkway Rt. 183 & Van Reed Rd., PO Box 15152 Parsippany, NJ 07054 Reading, PA' 19612-5152 ATTN Accounts Payable ATTN:
W. Jeltner, Ext. 5186 CUST. P.O.
LAB REPORT NO.
SHIPMENT INTOICE DATE PP062256/R2324 TC-517.23A Complete 2/5/88 DESCRIPTION
(((((((({hf(([h((((N(([
' i.
1 pc.
1/2 - li x 1-3/4" long Hex Capscrew Sample No. OC-023
Reference:
GPU La; Repor t (159233 k
Req. f5393-88-2324, Rev. 000
- } ::::::::::::';;;;. :
s A.
The above referenced sample was submitted to chem
~
~;
evaluation by Spectrochemical Analysis and found to be in conformance to ASTM A-193, Grade B8.
The results are as follows:
ELEMENT REQUIRED ACTUAL Carbon 0.09 maximum 0.008
.Mang ane se 2.04 maximum 1.20 Phosphorus 0.055 maximum 0.028 Sulfur 0.035 maximum 0.009
. Silicon 1.05 maximum 0.62 Nickel 7.85 - 10.65 9.92 Chro=ium 17.80 - 20.20 18.22
+,
3.134 Copper NOTE:
Copper content unusually high.
B.
A Tensile test was performed on the above Test Specimen and it was l
found to' be in conformance to ASTM A-193, Grade B8 per the t
l following results:
REQUIRED ACTUAL Tensile Strength 75,000 PSI 104,591 PSI Yield Strength 30,000 PSI 96,938 PSI Elongation 30.0%
36.3%
i l
l Robert W. McVaugh MERCURY CONT AMINATION Durin; the te;*ing and Presiden inspection, the product did not come in direct contact with mercury or any of its compounds nor with any mercury containing den,ces employing a s:ngle boundary
. g, Rf1M1TfrEin@'.
'_.,____________L m syys_ _ _ _ _
A
$N kale c measco R0. 3 oooa y g TERRIS: NET CASH 10 DAYS
{
/
SERVICE CHARGE OF 1% PER MONTH AFTER 10 DAYS.
/
!gg 1
-~ m ggg I
SHIPMNG ADDRESS tro un sTAEET, DUSUN, PA 13e17 l
Pggxg9 Dublin, Pennsylvania f 6977 gpg GPU Nuclear Corporation GPU Nuc1 car Corporation t
100 Interpace Parkway Rt. 183 & Van Reed Rd., PO Box 15152 Parsippany, NJ 07054 Reading, PA 19612-5152 ATTN Accounts Payable ATIN:
W.,Jeitner, Ext. 5186 CUST. P.O.
LAB REPORT NO.
SHIPMENT INVOICE DATE PP062256/R2324 TC-517.23B Complete 2/5/98 DESCRIPTION
- s..:.:!:**;*::.;,;;;;**:
't J.
1 pc.
1/2 - 13 x 1-1/4" long Hex Capscrew Sample No. OC-023' Referoncc:
GPU Lab Report (159233 s
Req. 95393-88-2324, Rev. 000
- ^.::::
- ~;;;:::::::::::::::::::
C.
A Hardness test was performed on the above Tesi Specimen and it was found NOT to be in conformance to ASTM A-193, Grado B8 per the following results:
REQUIRED:
RB 100 Maximum
/
ACTUAL:
RC 28*
- /
- g
'a All testing performed in accordanco with GPU Nuclear O.A. Program.
Robert W. McVaugh UERCURY OONT AYIN ATION During the testin; and President inipectlon, the product did not come in direct contact b
with mercury or any of its compounds nor with any mercuiy containing devices employing a single boundary MMMM-f '
agxp639 8'outva8._
l N'/4ftCGl4f f0MPIMMC4N0*Y0 0 MM TERIAS: NET CASH 10 DAYS g
g
(
/
/!
SERVICE CHARGE OF 1%% PER MONTH AFTER 10 DAYS.
/
/ gg I
!1EB11NGINC SHIPPING ADDRESS P.O. Box 249 Dublin, Pennsylvania 18917 120 wu. STREET. DuBUN. PA 18011 SOLD TO SHIP TO GPU NElear Corporation GPU NuclEr, Corporation 100 Interpace Parkway Rt. 183 & Van Reed Rd., PO Box 15152 Parsippany, NJ 07054 Reading, PA 19612-5152 ATTN:
Accounts Payable ATTN:
W. Jeitner, Ext. 5186 CUST. P.O.
LAB REPORT NO.
SHIPMEET INTOICE DATE PP062256/R2324 TC-517.24 Complete,
2/5/88 DESCRIPTION
((][ffffffffff'f(({fffff
'e T U.::.*::::::::.n:::::::
1 pc.
5/8 - 11 x 4" long Full Threaded Stud Sample No. OC-024, P.O. No. OP-010467 Itcm #001
Reference:
GPU Lab Report #159233 Req. 45393-88-2324, Rev. 000
-"":::::::::::f::::::::
A.
The above referenced sample was submitted to chemical content evaluation by Spectrochemical Analysis and found to be in
(
conformance to ASTM A-193, Grade B7.
The results are as follows:
ELEMENT REQUIRED ACTUAL
[
s...
Carbon 0.35 - 0.51 0.409 Menganese 0.61 - 1.14 0.95 Phosphorus 0.040 maximum 0.028
' Sulfur 0.045 maximum 0.020 Silicon 0.13 - 0.37 0.26 Chromium 0.70 - 1.25 1.08 Molybdenum 0.13 - 0.27
- q 0.17 B.
A Tensile test was performed on the above Test Specimen and it was found to be in conformance to ASTM A-193, Grade B7 per the followi:fg results:
~
REQUIRED ACTUAL Tennile Strength 125,000 PSI 142,276 PSI 105,000 PSI 132,113 PSI Yield Strength Elongation 16.0%
19.3%
Reduction of Area 50.0%
59.9%
C.
A Hardness test was performed on the above Test Specimen in accordance with ASTM A-193, Grade B7 and it was found to have a hardness of RC 30. (No Requirement)
All testing performed in accordance with GPU Nuclear Q..k.
Program.
Robert W. McVaugh MERCURY CONT AMIN ATION Duriig the tilbr.g ard Presiden inspection, the product did not come in direct contact with mercury or any of its compounds nor with any (g L g (
_ $p.
@M m
mercury containing devices empicying a singit boundary
I f
l i
muc, Noe 3 ooo3
% /
a/,
2 w 24& sees TERMS: NET CASH - 10 DAYS l
S SERVICE CHARGE OF 1%% PER i
i MONTH AFTER 10 DAYS.
i
/
ggg t
SHIPPING ADDRESS TES'uTNG INC sto uu siRtri, oueun. PA ssest P.O. Box 249 Oublin, Pennsylvania 18917 SHIP TO SOLD TO GPU NuclU r Corporation GPU NE lear Corporation 183 & Van. Reed Rd., PO Box 15152 Rt.
100 Interpace Parkway Reading, PA 19612-5152 Parsippany, NJ 07054 ATTN:
W. Jeitner, Ext. 5186 ATTN:
Accounts Payable 1
INVOICE DATE SRIPMENT CUST. P.O.
LAB REPORT NO._
2/5/88 PP062256/R2324 TC-517.25 Complete f[.[fffffffffff'h)ffffff3 DESC2IPTION
- .r. ;!!**:::::;.!'.:~. **
1-1/8 - 7 x 6-1/2" long Full Threaded Studi. :::::::::::::::;:;:;:::;:;:;:;:;:;
i :;;;;;;;;;;;;;
1 pc.
Sample No. OC-025, P.O. No. OP-010467 Item 4002
- 4::::::::::
GPU Lab Repor'. #159233
Reference:
45393-88-2324, Rev. 000 Req.
The above referenced sampic was submitted to chemical content evaluation by Spectrochemical Analysis and found to be inThe resul(s are as f A.
conformance to ASTM A-193, Grade B7.
ACTUAL
(
REQUIRED ELEMENT 0.407 0.35 - 0.51 Carbon 0.93 0.61 - 1.14 0.014 Manganese 0.040 maximum Phosphorus 0.045 maximum 0.021 Sulfur 0.27 0.13 - 0.37 Silicon 0.99 0.70 - 1.25 Chromium 0.25 0.13 - 0.27 Molybdenum
~,
test was performed on the above Test Specimen and it was i
found to be in conformance to ASTM A-193, Grade B7 per the A Tensile B.
followin,g results:
REQUIRED ACTUAL 141,372 PSI 125,000 PSI Tensile Strength 127,858 PSI 105,000 PSI 20.0%
Yield Strength 16.0%
60.7%
Elongation 50.0%
Reduction of Area Specimen in A Hardness test was pcrformed on the above Test accordance with ASTM A-193, Grade B7 and it was found to have a C.
hardness of RC 27. (No Requirement)
All testing pertormed in accordance with GPU Nuclear Q.A. Program.
Robert W. McVaugh WBCOM CONT A*0lN ATION Du ng.he test y and President n
inspection, the prMuct did not come in detect contact mth mercury nr any of its compounds not mth any mascury containing devices employing a singfe boundary
- *0* N 00*Tbat Mmriotarm.
%/e <<a/, /
M g m aec, No. 2 oooa 2w248.sess I
TERMS: NET CASH - 10 DAYS
~::t SERVICE CHARGE OF 1%% PER
! g//
l MONTH AFTER 10 DAYS.
i
[
/ gg l
SHIPPING ADDRESS
.._J TEB11NG INC sto uu sinssi, ousuun. ps seest P.O. Box 249 Dublin, Penns)1vania 18917 SHIP TO SOLD TO GPU Nuc1 Tar Corporation GPU Nuclear Corporation 183 & Van Reed Rd., PO Box 15152 Rt, 100 Interpace Parkway Reading, PA 1.9612-5152 Parsippany, NJ 07054 ATTN:
W. Jeitner, Ext. 5186 ATTN:
Accounts Payable INVOICE DATE SHIPMENT CUST. P.O.
LAB REPORT NO.
2/5/88 PP0622T67R2324 TC-517.26 Completo j,'(((({****((*{**j'*****{
DESCRIPTION
. H ;; MI*!*:* ;;;;;M*:::
3/4 - 10 x 4-1/2" long Hex Head Bolt f 5j'*j'y***jj'j'******j'*
Sample No. CC-026, P.O. No. CP-019552 1 pc.
- 333;;n.g;;;;;;;;;;
Item #001 M*:::::*:MM M:::::::*
GPU Lab Report #159233 gngg;g;;;;;;ng.g; Req. 15393-88-2324, Rev. 000 3g3333;;;;g33 :
Reference
- t::::t.:.:.:.:.:.
content The above referenced sample was submitted to chemica in evaluation by Spectrochemicc1 Analysis and found to be A.
The results are as f.ollows:
conformance to ASTM A-325.
7..
{
ACTUAL REQUIRED ELEMENT 0.333 0.27 minimum Carbon 0.91 0.47 minimum 0.039 Manganese 0.048 maximum Phosphorus 0.020 0.058 maximum Sulfur l
A Tensile test was performed on the above Test Specimen and it was found to be in conformance to ASTM A-325 per the following B.
\\
ACTUAL results:
REQUIRED _
140,474 PSI 120,000 PSI Tensile Strength 127,842 PSI Yield Strength 18.5%
Elongatio'n 62.0%
Reduction of Area A Hardness test was performed on the above Test Specimen and it was found to be in conformance to ASTM A-325 per the following C.
results:
RC 24 - RC 35
/
ACTUAL:
RC 29 REQUIRED:
All testing performed in accordance with GPU Nuclear Q.A. Program.
Robert W. McVaufh President ME RCURY CONT Af/IN ATION Out:ng th tetin; and irspection, the product did not come in direct contact C
oth mercury or any of its compo"nds not with any O
mercury containing devices empf oying a single boundary of containment.
- -. _........, y gg...,, 3, g
215/2 4 9898
/e a/,
- emau, No.3 ooo3 TERMS: NET CASH 10 DAYS g; yy i
/ [
SERVICE CHARGE OF 1% PER MONTH AFTER 10 DAYS.
i jj gg SHIPPING ADDRESS P.O. Box 249 Dublin, Pennsylvania 18917 sto usut sinssi. oueun. pr saess SOLD TO SHIP TO GPU Niiclear Corporation GPU NuclH r. Corporation 100 Interpace Parkway Rt. 183 & Van Reed Rd., PO Box 15152 Parsippany, NJ 07054 Reading, PA 19612-5152 ATTN:
Accounts Payable ATTN W.'.Jeitner, Ext. 5186 CUST.
P.O.
I.AB REPORT NO.
SHIPMENT INTOICE DATE PP062'23T7Tt23 24 TC-517.27 Complete 2/5/88
(((([f((f((((f[,['y',$(((({
DESCRIPTION
- ~;;'.
- ***
1 pc.
7/8 - 9 x 4" long Threaded Stud
- f;;;;;;;;;;;
Sample No. OC-027, P.O. No. PP-042448 Itom #003
Reference:
GPU Lab Report 1159233
- g;;;;;;;;;;;;;;;;;f::-
Req. #5393-88-2324, Rev. 000
...;.~;:::::::::::::::::*:
...................r.....
A.
The above referenced sample was submitted to chemical content evaluation by Spectrochemical Analysis and foun to be in
(
conformance to ASTM A-193, Grade B7.
The results are as follows:
ELEMENT REQUIRED ACTUAL Carbon 0.35 - 0.51 0.387 Manganese 0.61 - 1.14 0.88 Phosphorus 0.040 maximum 0.012
- Sulfur 0.045 maximum 0.033 silicon 0.13 - 0.37 0.26 Chromium 0.70 - 1.25 1.04 0.26 0.13 - 0.27 Molybdenum
^
/
s, B.
A Tensile test was performed on the above Test Specimen and it was found to be in conformance to ASTM A-193, Grade B7 per the following results:
REQUIRED ACTUAL Tensile Strength 125,000 PSI 136,566 PSI Yield Strength 105,000 PSI 125,418 PSI Elongation 16.0%
27.5%
Reduction of Area 50.0%
63.6%
C.
A Hardness test was performed on the above Test Specimen in accordance with ASTM A-193, Grade B7 and it was found to have a hardness of RC 29. (No Requirement)
All testing performed in accordance with GPU Nuclear Q. A. Program.
Robert W. McVaugh ME RCURY CONT AMIN ATION During the testir..and Prosident inspection, the product did not come in direct contact C
with mercury or any of its compounds nor with any mercury containing devices employing a single boundary w a nt u u nrual
bfGl$ f OmtGo4C4 NQ. 3 0 0 0 3 2***
- TSRMS: K2T CASH - 10 DAYS E f5
(
/
/
SERVICE CHARGE OF 1% PER MONTH AFTER 10 DAYS.
/gg i
--! TEB11NG INC, SHIPPING ADDRESS m m m.wo m mt 1
PQxg9 Dublin, Pennsylvania 18917 gggy,9 GPU Niiclear Corporation GPU NuclUr Corporation f
100 Interpace Parkway Rt. 183 & Van Reed Rd., PO Box 15152 Parsippany, NJ 07054 Reading, PA-19612-5352 ATTN:
Accounts Payable ATTN:
W. Jeitner, Ext. 5186 i
i CUST. F.O.
LAB REPORT NO.
SEIPMENT 1W70IC3 DATE PP06223T7R2324 TC-517.28 Complete 2/5/88 DESCRIPTION
- ...,;;;;;;;;;;.', :'ll:::
- .'..
- 0*:::*:::f:: M :::
1 pc.
3/8 - 16 x 1-3/4" long Threaded Stud s.
Sampla No. OC-028, P.O. No. OP-031876 '
- j::::::::::::::
- }
- :::::::. ::
Item #007
Reference:
GPU Lab Report #159233 Req. (5393-88-2324, Rev. 000 l
A.
The above referenced sampic was submitted to chem a
e evaluation by Spectrochemical Analysis and found to be in conformance to ASTM A-193, Grade B7.
The results are as follows:
C' ELEMENT REQUIRED ACTUAL Carbon 0.35 - 0.51 0.373 r
Manganese 0.61 - 1.14 0.92 Phosphorus 0.040 maximum 0.018 Sulfur 0.045 maximum 0.036
- Silicon 0.13 - 0.37 0.24 Chromium 0.70 - 1.25 1.02 Molybdenum 0.13 - 0.27 0.20 A Tensile test was performed on the above Test Specimen and it was B.
found to be in conformence to ASTM A-193, Grade B7 per the following results:
REQUIRED ACTUAL Tensile"Strength 125,000 PSI 161,764 PSI Yield Strength 105,000 PSI 151,960 PSI 16.0%
17.8%
Elongation Reduction of Area 50.0%
56.8%
A Hardness test was performed on the above Test Specimen in C.
accordance with ASTM A-193, Grade B7 and it was found to have a hardness of RC 35. (No Requirement)
All testing performed in accordance with GPU Nuclear Q. A. Program.
Robert W. McVaugh MERCURY CONT AMIN ATION - During the testin; and President inspection, the product did not come m direct contact g
with mercury or any of its compounds nor with.ny g..f
_,,.ons. ~,,, m.,e m,.o
..,m,,e -.,
auteno scurun of containment.--
pfca/,
of vaa <,
No. 3 ooo3 215/249-9098 TERIAS: NET CASH.10 DAYS g;
,,3
(
SERVICE CHARGE OF 1% PER
/
g MONTH AFTER 10 DAYS.
j SHIPPING ADDRESS sto unLL siREET, DusuN. PA 1a011 PQQxg9 Dublin, Pennsylvania 18917 yg GPU Niiclear Corporation GPU Nuc1Hr Corporation 100 Interpace Parkway Rt. 183 & Van Reed Rd., PO Box 15152 Parsippany, NJ 07054 Reading, PA 19612-5152 ATTN Accounts Payable ATTN:
W. Joitner, Ext. 5186 CUST. P.O.
LAB REPORT NO.
SHIPMENT INTOICE DATE PP062256/R2324 TC-517.29 Complete 2/5/88 DESCRIPTION
- ~~ U!:*:!t*::: M;;*. ::::
1 pc.
1-1/4 - 8 x 10" Squ:rc Head Screw t c Sample No. OC-029
Reference:
GPU Lab Report (259233 s
Req. 45393-88-2324, Rev. 000
]******{********{*****{*
A.
The above referenced sample was submitted to chemica content evaluation by Spectrochemical Analysis and found to be in conformance to ASTM A-193, Grade B7.
The results are as follows:
ELEMENT REQUIRED ACTUAL Carbon 0.35 - 0.51 0.384 Mang ane se 0.61 - 1.14 0.86 l
Phosphorus 0.040 maximum 0.035 Sulfur 0.045 maximum 0.015 Silicon 0.13 - 0.37 0.28 Chromium 0.70 - 1.25 1.10 Molybdenum 0.13 - 0.27 0.20 B.
A Tensile test as performed on the above Test Specimen and it was found to be in conformance to ASTM A-193, Grade B7 per the following results:
5 REQUIRED ACTUAL Tensile Strength 125,000 PSI 136,025 PSI Yield Strength 105,000 PSI 122,646 PSI Elongation 16.0%
22.5%
Reduction of Area 50.0%
66.8%
C.
A Hardness test was performed on the above Test Specimen in accordance with ASTM A-193, Grade B7 and it was found to have s
hardness of RC 26. (No Requirement)
All testing performed in accordance with GPU Nuclear Q.A. Program.
Robert W. McVaugh
'M RCURY CONT AMIN ATION During the tes ing ad President
..npection, the product did not come in direct contact g
hI>
(-
w.th mf tcury or any of its compounds nor with any r,etcury cents:ning devices employing a singte boundary 4W autono sourvaa of containment.
215/249-mu
// u g/g g[ym c, No. 3 ooo2 j
TERMS: NET CASH to Days g,
l
/
/
SERvlCE CHARGE OF 1% PER MONTH AFTER 10 DAYS.
)
/
/
g l
I TEB11NGINC, SHIPPING ADDRESS P.O. Box 249 Dublin, Pennsylvania 18917 sto usu. sintri. oueun pA seest SOLD TO SHIP TO GPU NE lear Corporation GPU Nucle r Corporation 100 Interpace Parkway Rt. 103 & Van Reed Rd., PO Box 15152 Parsippany, NJ 07054 Reading, PA 19612-5152 ATTN:
Accounts Payable ATTN:
W.-Jeitner, Ext. 5186 CDST. P.O.
LAB REPORT NO.
SHIPMENT INVOICE DATE PP062256/R2324 TC-517.30 Complete 2/5/88 DESCRIPTION
~~***********{***[******
- * :.* M. *. ;. * *. :. :. : :..Z... :..: :. :
r 1 pc.
1-1/2 - 8 x 9-1/4,, long Stud i,-
Sample No. OC-030, P.O. No. OP-001803 Item f001
Reference:
GPU Lab Report i159233 Req. f5393-88-2324, Rev. 000
- {*{**;***********((****
- '.~ :.-* ; * * * * :'. ;. *. :. :. :. :.
A.
The above referenced sample was submitted to chemical content evaluation by Spectrochemical Analysis and found to be in conformance to ASTM A-193, Grade B7.
Tbc results are as follows:
ELEMENT REQUIRED ACTUAL Carbon 0.35 - 0.51 0.410 Manganese 0.61 - 1.14 0.86 l
Phosphorus 0.040 maximum 0.014 Sulfur 0.045 maximum 0.019 Silicon 0.13 - 0.37 0.27 Chromium 0.70 - 1.25 0.94 Molybdenum 0.13 - 0.27 0.17 i
B.
A Tensile test was performed on the above Test Specimen and it was found to be in conformance to ASTM A-193, Grade B7 per the followir}g results:
REQUIRED ACTUAL Tensile Strength 125,000 PSI 128,331 PSI Yield Strength 105,000 PSI 107,601 PSI Elongation 16.0%
22.5%
Reduction of Area 50.0%
66.5%
C.
A Hardness test was performed on the above Test Specimen in accordance with ASTM A-193, Grade B7 and it was found to have e hardness of RC 27. (No Requirement)
All testing performed in accordance with GPU Nuclear Q.A. Program.
Robert W. McVaugh MERCURY CONT AMIN ATION Ounn; *he :""n; ui:
ggg inspection, the poduct did not come in direct enatact hl,
(,
i with mercury or any of its tempeunds nor with any mercury containing devices employing a sing!r boundary 9W
'hMMM w pvo s,o arvan
4
$// sca/e o)# Wwyfvma.we No.
swannu TERMS: NET CASM.10 DAYS
!]I SERVICE CHARGE OF 1%% PER
[
/
i MONTH AFTER 10 DAYS.
g s
SHIPPING ADDRESS P.O. Box 249 Oublin, Pennsylvania 18917 sto wu. sinrr, Oueun. rA seetr SOLD TO SHIP TO GPU NElear Corporation GPU NuclUr Corporation 100 Interpace Parkway Rt. 183 & Van Reed Rd., PO Box 15152 Parsippany, NJ 07054 Reading, PA' 19612-5152 ATTN:
Accounts Payabic ATTN:
W. Jeitner, Ext. 5186 CUST. P.O.
LAB REPORT NO.
SHIPMENT INVOICE DATE PP062256/R2324 TC-517.31 Complete 2/5/88
- ! *:::~;*******;*::
DESCRIPTION
' R ! : *** ' * :~. ::::**
1 pc.
1-1/4 - 8 Box Nut, Sample No. OC-031
- o. -
P.O. No. OP-003716, Item 9001 jj{*jjjj'**j'***((**((***
Reference:
GPU Lab Report 4159233 Req. 65393-88-2324, Rev. 000
(((({*((*((*;{****{**{****
- l***;*;;;;*::***::::
6..................
The above referenced sample was submitted to cIwmical conterit A.
evaluation by Spectrochemical Analysis and found to be in conformance to ASTM A-194, Grade 28.
The results are as follows:
ELEMENT REQUIRED ACTUAL
-Carbon 0.40 minimum 0.430
' Phospho r us 0.04 maximum 0.020 Sulfur 0.05 maximum 0.022 A Hardness test',was performed on thelabove Test Specimen and it B.
was found to be in conformance to ASTM A-194, Grade 2B per the following results:
REQUIRED:
RC 24 - RC 38
/
ACTUAL:
RC 31 4
All testing performed in accordance with GPU Nuclear Q.A. Program.
Robert W. McVaugh MERCURY CONT AMIN ATION During the ** sting rad President inspection, the product did not come in direct contact with mercury or any of its compounds nor with any
. mercury containing devices employing a single boundary of contai nment.
i
f
/ Wofwaa.we No. 3 ooo3
% /9 ca/e 9
=*
TERMS: NET CASH 10 DAYS w'iX SERVICE CHARGE OF 1% PER lllMj'/
/'
MONTH AFTER 10 DAYS.
I I
f, g
I SHIPPING ADDRESS 120 usu. siREET. Oueun. PA ssetr P.O. Box 249 Dublin. Pennsylvania 16917 SHIP TO SOLD TO GPU Nuclear Corporation GPU Nuclear Corporation 183 & Van Reed Rd., PO Box 15152 Rt.
100 Interpace Parkway Parsippany, NJ 07054 Reading, PA. 19612-5152 ATTN:
W. Jeitner, Ext. 5186 ATTN:
Accounts Payable CUST. P.O.
LAB REPORT NO.
SHIPMENT INVOICE DATE PPOEI2256/R2324 TC-517.32 Complete 2/5/88
{,((((((((((;{[},{j]jjj((
]
DESCRIPTION I pc.
1-1/2 - 8 Bex Nut, Sample No. OC-032 lu;;;;;;;***** :::::*!***
P.O. No. OP-040850 E :: '*;;:;:* **: *:: *::*:! :*::
t
~;;;
- I*** T*!*
Reference:
GPU Lab Report #159233
'((:((*{**((((***((**{*
Req. 45393-88-2324, Rev. 000
- i::::
- n.J :::::::::::
The above referenced sample was submitted to chemical content evaluation by Spectrochemical Analysis and foun*d to be in A.
The results are as follows:
conformance to ASTM A-194, Grade 28.
ACTUAL ELEMENT REQUIRED 0.40 minimum 0.450 Carbon Phosphorus 0.04 maximum 0.035 Sulfur 0.05 maximum 0.028 A Hardness test'was performed on the.,above Test Specimen and it i
was found to be'in conformance to ASTM A-194, Grade 2B per the B.
following results:
REQUIRED:
RC 24 - RC 38
/
ACTUAL:
RC 28 L
l All testing performed in accordance with GPU Nuclear 0.A. Program.
Robert W. McVough I
MERCURY CONT AMIN ATION During the testing and President b
inspection, the product did not come in dire:t contact
,Q f
with mercury or any of its compounds not with any mercury containir.g devices employing a singfe boundary coato senes of centainment.
w
/pfcg/g g[
Wap[yma c, Noe 3 ooo3 215/246-sess TER888: NET CASM 10 DAYS SERVICE CHARGE OF 14% PER
/
/
MONTH AFTER 10 DAYS.
/
g SHIPPING ADDRESS 12o unut sinEET, oueenn, en seest P.O. Box 249 Oublin, Pennsylvania 18917 SOLD TO SHIP TO GPU Niiclear Corporation GPU Nuclear Corporation 100 Interpace Parkway Rt. 183 & Van Reed Rd., PO Box 15152 Parsippany, NJ 07054 Reading, PA' 19612-5152 ATTN:
Accounts Payable ATTN:
W. Jeitner, Ext. 5186 CUST. P.O.
LAB REPORT NO.
SHIPMENT IETOICE DATE PP062256/R2324 TC-517.33 Complete 2/5/88 DESCRIPTION
((*****{****(({**j((***
4
!;;;;;;*** I!! ;;;;;;** -
1 pc.
7/8 - 9 Nut, Sample No. OC-033 j'*j';jj{*****((*((***;jjjj P.O. No. OP-030915, Item 8002
Reference:
GPU Lab Report 1359233 Req. 45393-88-2324, Rev. 000
- 4
- :::::::::::::::
- .~.:::::::::::::::::::'!
The above referenced sample was submitted to chemical conte"nt A.
\\
evaluation by Spectrochemical Analysis and found to be in conformance to ASTM A-194, Grade 28.
The results are as follows:
ELEMENT REQUIRED ACTUAL (Carbon 0.40 minimum 0.454 "Phosphorus 0.04 maximum 0.032 Sulfur 0.05 maximum 0.044 B.
A Hardness test ^was performed on the above Test Specimen and it was found to be in conformance to ASTM A-194, Grade 28 por the following results:
1 REQUIRE,D:
RC 24 - RC 38
/
ACTU AL:
RC 28 I
I All testing performed in accordance with GPU Nuclear Q.A. Prograrn.
Robert W. McVaugh MERCURY CONT AMIN ATION Durirq the tet'm and President inspection, the product did not come m dirett contact g
\\L with mercury or any of its compounds not with any Md mercury Containing devices employing a single boundary aut>.owto scaafvat of containment.--- -
2te ms as,/
g/g
- gwngye, No. 3 oooa TERMS: NET CASH - 10 DAYS
- i:
SERVICE CHARGE OF 1% PER
[
/
hgg MONTH AFTER 10 DAYS.
i
/ TESTINGiM SHIPMNO ADDRESS sto usu. stREri. oueun. rA see tr P.O. Box 249 Dublin, Pennsylvenia 18917 SHIP TO SOLD TO GPU NE* ear ;orporation GPU Nuc1 car Corporation l
100 Int.tpace Parkway Rt. 183 & Van Reed Rd., PO Box 15152 Parsippany,.NJ 07054 Reading, PA 19612-5152 ATTN:
Accounts Payable ATTN:
W. Jeitner, Ext. 5186 CUST. P.O.
LAB REPORT NO.
SHIPMENT INTOICE DATE PP062256/R2324 TC-517.34 Complete 2/5/88 DESCRIPTION
{ * [ * * { * * * { * * * * * * * * * *
- i
,.J :::::: *!!! '.***J*t.*:.
1./8 - 8 Hex Nut, Sample No. OC-034
- y ;;;;;;;;;.;;;;;;;;;;;;$.;
I pc.
a P.O. No. OP-040850
.u......................
Reference:
GPU Lab Report 1159233 Req. #5393-88-2324, Rev. 000
- I'* * : *******;*
'(*
The above referenced sample was submitted to chemical content A.
evaluation by Spectrochemical and Wet Chemical Analysis and found to be in conformance to ASTM A-194, Grade 28.
The results are as follows:
ELEMENT REQUIRED ACTUAL Carbon 0.40 minimum 0.437 Phosphorus 0.04 maximum 0.027 Sulfur 0.05 maximum 0.034
/
k A Hardness test was performed on the above Test Specimen and it
/
B.
was found to be in conformance to ASTM A-194, Grade 2H per the following results:
REQUIRE 6:
RC 24 - RC 38
/
ACTUAL:
RC 25 All testing per formed in accordance with GPU Nuclear O. A. Program.
MERCURY CONT AMIN ATION During tha test;ng and Robert W. Mc ugh inspection, the product did not come in direct contact K L with mercury or ar y of its compnunds not with any W
mircury containing devices employine a sinate boundery m
Avtereo swtus of containment.
o
%/<<ca/,
/ M oma c, No. 3 '
- o3 21s/24e-sees 9
Tantes: NsT CASH 10 DAYS
)
p,,,,.
,3 El
/
SERVICE CHARGE OF 1% PER h /
MONTH AFTER 10 DAYS.
g E
SHIPPING ADDRESS P.O. Box 249 Oublin, Pennsylvania 18917 120 wu siREET. DueusN. 9A tee 11 SOLD TO SHIP TO GPU Niiclear Corporation GPU NuclHr Corporation 100 Interpace Parkway Rt. 183 & Van Reed Rd., PO Box 15152 Parsippany, NJ 07054 Heading, PA 19612-5152 ATTN:
Accounts Payabic ATTN:
W. Jeitner, Ext. 5186 CUST. P.O.
LAB REPORT NO.
SEIPMENT INVOICE DATE 2
TC 517.35 Complete 2/5/88 PP062256/R2324 DESCRIPTIOtt
}]*********{***{***{*jj 1 pc.
1-1/2 - 8 Hex Nut, Sample No. OC-035
'r i M ;;M U * * *
- M *111 M M * ;
- j ' * * *; *
- j ' * * * * * * * *; * * *
- P.O. No. OP-001003, Item 4002
- !***M *M M**;**!
Referenec:
GPU Lab Report 6159233 Req. 15393-88-2324, Rev. O O
'UMMUU*UUMM*MI!
.;; O M::::::::::::::::::
A.
The cbove referenced sample was submitted to chemical content
(
evaluation by Spectrochemical Analysis and found to be in conformance to ASTM A-194, Grade 28.
The results are as follows:
ELEMENT REQUIRED ACTDAL Carbon 0.40 minimum 0.405
' Phosphorus 0.04 maximum 0.033 Sulfur 0.05 maximum 0.026 B.
A Hardness test',was performed on thelabove Test Specimen and it was found to be in conformance to ASTM A-194, Grade 28 per the following results:
REQUIRC,p RC 24 - RC 38
/
ACTUAL:
RC 28 All testing performed in accordance with GPU Nuclear Q. A. Program, r
Robert W. McVaugh MERCURY CONT AMIN ATION Dunns the wq s d Presiden inspection, the product did not come in direct contact with mercury or any of its comp;unds not with any
(
mercury containing devices emNoying a singte boundary i
_ ___ of,contain me nt._ _ _ _
Ufea/o of $/wmance N0. s o o o a 3w2 m
- TERT 08: NET CASH 10 DAYS 1ll SERVICE CHARGE OF 1%% PER MONTH AFTER 10 DAYS.
gg SHIPPING ADDRESS sto wu. STREET. ous.un, PA sse1r P.O. Box 249 Dublin, Pennsylvania 18917 SHIP TO SOLD TO GPU NE lear Corporation GPU NuclTir Corporation 100 Interpace Parkway Rt. 183 & Van Reed Rd., PO Box 15152 Parsippany, NJ 07054 Reading, PA 19612-5152 ATTN:
Accounts Payable ATTN:
W. Jeitner, Ext. 5186 CUST. P.O.
LAB REPORT NO.
SBIPMENT INTOICE DATE PP062256/R2324 TC-517.36
- Complete, 2/5/88 s.'
DESCRIPTIOE
...;d :::::::::.:;t::::::
}
- ..;'.::::::*::.;n!,0:::
1 pc.
1 - 8 Hex Nut, Sample No. OC-036
's f :::::::::! :7::::::: ::::
P.O. No. PP-020823, Item 4001
Reference:
GPU Lab Report i159233 l
Req. #5393-88-2324, Rev. 000 i
The above referenced sample was submitted to ch'emical conte t A.
evaluation by Spectr'ochemical Analysis and found to be in conformance to ASTM A-194, Grtde 28.
The results are as follows:
ELEMENT REQUIRED ACTUAL
.; Car bon 0.40 minimum 0.432 Phosphorus 0.04 maximum 0.035 Sulfur 0.05 maximum 0.022 A Hardness test'was performed on the Nibove Test Specimen and it B.
i was found to be in conformance to ASTM A-194, Grade 28 per the following results:
REQUIRE'D:
RC 24 - RC 38
/
ACTUAL:
RC 27 l
l
?
All testing performed in accordance with GPU Nuclear Q.A. Program.
Robert W.
'4 0Va ug h MERCURY CONT AMIN ATION During the testing and Preside ir spection, the preduct did not come in direct contact with mercury or any of its compounds not with any mercury containing devices employing a single boundary of containment.
/~
W./<
a/,
7
- awowo, No. 8 ooo2 2w20ssee TSRMO: NE7 CASM - 10 DAYS "ill
$ERVICE CHARGE OF 1%% PER j
g MONTH AFTER 10 OAYS.
j g
SHIPPING ADDRESS sto wu. sianti. ousun. pr sonsr P.O. Box 249 Oublin, Pennsytvania 18917 SEIP TO SOLD TO GPU NuclH r Corporation GPU NE lear Corporation 183 & Van Reed Rd., PO Box 15152 Rt.
100 Interpace Parkway Parsippany, NJ 07054 Reading, PA 19612-5152 ATTN:
Accounts Payable ATTN:
W. Jeitner, Ext. 5186 CUST. P.O.
LAB REPORT NO.
SHIPMENT INVOICE DATE 2/5/88 PP06223T/R2324 TC-517.37
- Complete,
- I'**
- I!
- * ** * * * : {.f ** ** * *::
DESCRIPTION 1;;;;;;;I*III;;;;;;;;*
1 pc.
3/4 - 10 Nut, Sample No. OC-037 r
,. ij((*((((j((((((jjjjjjjjj P.O. No. OP-030915, Item 6006
Reference:
GPU Lab Report 1159233 Req. t5393-88-2324, Rev. 000 I
Tne above referenced sample was submitted to chemical content A.
evaluation by Spcetrochemical Analysis and found to be in I
conformance to ASTM A-194, Grade 2H.
The results are as follows:
ELEMENT REQUIRED ACTUAL Carbon 0.40 minimum 0.439
' Phosphorus 0.04 maximum 0.039 Sulfur 0.05 maximum 0.024 A Hardness test',was. performed on the.,above Test Specimen and it B.
was found to be in conformance to ASTM A-194, Grade 2H per the following results:
REQUIREp RC 24 - RC 38
/
ACTUAL:
RC 27 All testing performed in accordance with GPU Nuclear Q.A. Program.
Robert W. McVaugh MERCURY CONT AMIN ATIOh Duong the mtmi 4d President inspection, the product did not come in (brett contact
\\
\\.
D with mercu'y or any of its tempounds not With any 9 W mercury containing devices emptoying a sin;fe boundary m m s4 u rva:
, _ _ __ _ __of contain ment.- ------ -._..
4 215/249 9898
,4 gg/g y uma c, No. 3 oooa TERMS: NET CASH 10 DAYS gy ry
/
/
SERVICE CHARGE OF 1%% PER MONTH AFTER 10 DAYS.
I 3 1LADORATORY I
I Txs11NoINc, SHIPMNG ADDRESS P.O. Box 249 Oubhn, Pennsylvania 18917 1eo uiu. siREET. Dueun. n teetr SOIA TO SEIP 'to GPU Nuclear Corporation GPU Nuclear Corporation 100 Interpace Parkway Rt. 183 & Van Recd Rd., PO Box 15152 Parsippany, NJ 07054 Reading, PA 19612-5152 ATTN:
Accounts Payable ATTN W. Jeitner, Ext. 5186 CUST. P.O.
LAB REPORT NO.
SHIPMENT IETOICE DATE PP0622T67R2324 TC-517.38 Complete 2/5/88 DESCRIPTION 1 pc.
5/8 - 11 Nut, Sampic No. OC-038 r, :::::::::::::::::::::::::
P.O. No. OP-046119, Item 9002
- '*
- ~
Reference:
GPU Lab Report (159233 Req. (5393-88-2324, Rev. 000
- t:::'
- n...*::::::::*::*:::::*
A.
The above referenced sampic was submitted to chemical content evcluation by Spectrochemical Analysis and found to be in conformance to ASTM A-194, Grade 28.
The results are as follows:
ELEn(ENT REQUIRED ACTUAL Carbon 0.40 minimum 0.403 Phosphorus 0.04 maximum 0.037 Sulfur 0.05 maximum 0.021 B.
A Hardness test was performed on the 't;bove Test Speciman and it was found NOT to be in conformance to ASTM A-194, Grade 2H por the 1
following results:
REQUIREb RC 24 - RC 38
/
ACTUAL:
RB 90*
\\
l l
l l
l l
All testing performed in accordance with GPU Nuclear Q. A. Program.
1 I
Robert W. McVaugh f
wERCURY CONT!. MIN ATION During the testing and Proside t l
inspection, tbt product did not come in direct contact l
mth mercury or any of its compounds not eth any
(
mercury containing devices employing a single boundary I
of containment.
Avtereo s.ouve
30003 TERASS: NET CASM = 10 DAYS 2
SERVICE CHARGE OF 1%% PER MONTH AFTER 10 DAYS.
j gg J
NNE sHwfwo Aconess 1to Mtu. tum. oues,n. n seen P.O. Box 248 OuMin, Pannefysnia 18917 gB SEMA TO GPU WWClear COCpOE4%i44 GPD ME leair Corporation 143 & Van Reed Sd., 70 50s 15152 St.
100 Interpace Parkway P4.csippsny, NJ 07054 Relading, PA 19612-5152 ATTH:
Account.s Pr'yabic A*MN W. Jeritner, Sat. 5196 I
CEST. P.O.
LAS REPORT &
SS1?NSET 1550_195 94f5 FPO422TT/R232 4 TC-517.38A Complet.e 2/11/89 M *::::::7 DSeck1ETtos
- ' ' * * * : * : : : * : ' * * ~.: : :
' i-
.......;;;;*:::..;a;!::
I
) p '..
5/a - 11 Mut, 5amplo No. OC-038A P.O. No. OP-446119, Item 4002
,[,,],_.].....' } { !] :'
- **~***%
Rafarr.ncet GPU Lab Report $1592U R.,q.
45393-88-2324, Rov. O'OO
(((((((((((((((((('((((((,
- '**:':::*;** :~~~**;**:
' ?!!!:***.;;.....:
I i
a The above referenced sample was submitted to chemical content I
A.
evaluation by Spectrochemical Analysis and found to be in conformance to ASTM A-194, Grade 2H.
The results are as follower ELEMENT REQUIRED ACTUAL carbon 0.40 minimum 0.482 Phosphorum 0.040 maximum 0.012 i
0.050 maximum 1
0.043 Sulfur A Hardness test was performed on the above Test Specimen and it B.
was found to be in conformance to ASTM A-194, Grade 2H per the following resultat REQUIRED:
RC,24 - RC 3B
/
ACTUAL:
RC 31 i
All testing performed in accordance with GPU Nuclear Q.A. Program.
)
Robert W. McVaugh MERCURY CONTAMIN ATION Outing the testing and Preside t inspection,the product did not come in direct contact dt.
1 with mettury or any of its compoundi nor with any W
mercury containmg destes employing a sngle boundary i
6 wr w
J y
._ei sentagmf nt.- -
. ~
~
l 1
[g g/g a
owna4cs 0, 3 ooo3 215/ tosses TsRMS: NET CASH 10 DAYS 9!0 SERVICE CHARGE OF 1% PER i
MONTH AFTER 10 DAYS.
9 g
SHIPMNG ADORESS
^
120 ua 5TFEET, Dusun. FA 1ee11 P.O. Sox 249 Oublin, Pennsylvania 18917 SHIP TO SOLD TO GPU Iiuc1E r Corporation
~
GPU NE lear Corporation 183 & Van Reed Rd., PO Bor 15152 i
Rt.
100 Interpace Parkway Reading, PA 19612-5152 Parsippany, NJ 07054 ATTN W. Jeitner, Ent. C186 ATTH:
Accounts Payable CUST. P.O.
LAB REPORT NO.
SEIPMENT INVOICE DATE 70/E8 YP0622T57K2324 TC-517.39 Complete
- '******bMN'***:';;*:1
- '1J:*:X!?f.*fN* *:::;*.
N.
DESCRIPTION
- H;;;*;;12. dil l !
- *:
l 1 pc.
3/8 - 16 Nut, Sample No. OC-039
', ',~!***:::*:!!!)g)M*"*:::
P.O. No. PF-O':1876, Item 4005
- !y!!:7:::*:::::::::
Reference:
GPU Lab Report $159233 1 ::..!!* :::::: *!!!!!!
Beq. IS393-88-2324, Rcv. 000
- I::::::::::*;;;;*:::::,::t The above referenced sample was submitted to chemical content
(
ovaluation by 3pectrochemical Analysis and found to be in A.
The results are as follows:
conformance to ASTM A-194, Grade 28.
ACTUAL ELEMENT REQUIRED Ta' hon 0.40 minimum 0.695 Phosphorus 0.04 maximum 0.009 Sulfur 0.05 maximum 0.013 A Hardness test was performed on the,above Test Specimen and it was found to be in conformance to ASTM A-194, Grade 28 per the B.
following results:
REQUIRED:
RC 24 - RC 3B
/
ACTUAL:
RC 30 Program.
All testing performed in accordance with GPU Nuclear Q. A.
Robert W. Mcvaugh I
MERCURY CONT AMIN ATION Dur'.ng tN telung and President inspection, the product did not come in direct contact with mercury or any of its Compound 1 nor with any p
rrartury containing dnices employing a 5tngle bounds.y Aun<>mno sio nw
_ qf containment.,
wx-,
u:= v
- ~ ~ ~ ~
,, _ _,, ~
fCa/e of W Wma,Me NQ. 3 0 0 0 3 31 M
- 9**8 TERGIS: NET CASH.10 DAYS s$9 i
/
j SERVICE CHARGE OF 1%4, PER MONTH AFTER 10 DAYS.
y g
SHIPMN3 ADDRESS P.O. Box 249 Oublin, Pennsylvania f 6977 tro un sTurt, ousuk. PA tenir SOIA TO SEIP TO GPU NE lear Corporation GPU NuclU r. Corporation 100 Interpace Parkway Rt. 183 & Van Reed Rd., PO Box 15152 Parsippany, NJ 07054 Reading, PA 19612-5152 ATTN:
Accounts Payable ATTN:
W.,Jeitner, Ext. 5186 CUST. P.O.
LAB REPORT NO.
SUIPMENT IN9OICE DATE PP0622T67Tt2324 TC-517.40 Complete 2/5/88
{l**((**j'**{*****}**{*j
[
DESCRIPTION 1 pc.
3/4 - 10 Nut, Samplo No. OC-040 l
1 M 1;******;* W.!:** :
P.O. No. OP-046119, Item 9001 jj'*********jj'*j'****j'j
Reference:
GPU Lab Report 115S233 Req. 45393-88-2324, Rev. 000
- ((((*{*(((((({*{*{*j'jj
- p:::::::::
A.
The above referenced sample was submitted to ch'emical content I
evaluation by Spectr'ochemical and Wet Chemical Analysis and found to be in conformance to ASTM A-194, Grade 28.
The results are cs follows:
ELEMENT REQUIRED ACTUAL Carbon 0.40 minimum 0.44 Phosphorus 0.04 maximum 0.021 Sulfur 0.05 maximum 0.023 i
B.
A Hardness test was performed on the above Test Specimen and it was found to be in conformance to ASTM A-194, Grade 2H per the following results:
1 REQUIRED:
RC 24 - RC 38
/
ACTUAL:
RC 28 All testing performed in accordance with GPU Nuclear Q.A. Program.
i Robert W. McVau9h i
niERCURY CONTAMIN ATION Curin; the testirs and Presiden l
inspection, the product did not come m direct contact with mercury or any of its compounds not with any
(
mercury containing devices employing r single boundtry h
ATTACHMENT 4 t
e i.
EXCERPT FROM GPUN QUALITY ASSVRANCE PLAN f.
J e
o d
4 C
t GPUN Quality Assurance Plan (Section 2.2) 2.2 h the scoes of the GPUN Coerational Quality Assurance Program includ is not limited to, all itses and activities acolicante to tne oo:eration This of N!-1 and Oyster Crees considered to to 'igertant to safety.*
term is broader tnan "safety relatee" and eticanoasses structures, systems and comonents Uncluding nuclear fuel and raenaste).nica nave seen designated as Safety-Related Safety Class Ittt Class it.
- touisment The Environmental Qualification, Seismic Category I or Fire 7ectection.
secoe of tne Program includes ttems coverse oy tne 00ersting 1.icense and Technical Specifications (excluding non radiological monitoring) and i
(.
items required by tne following:
t A
Title 10. Code of Federal Regulations. Psrt 50, AnnendtA
' General Design Criteria for; Nuclear Power Plants *.
4.
Title 10. Code of Federal Regulations, Part 50, aeoendix $
"Quality Assurance Criteria for Nuclear Power Plants and Fuel b.
4 Reorocessing Plants'.
Title 10, Code of Federal Regulations, Part 71, Sutoart H "Quality Assurance 'or Ohtseing Putsges for Radioactive c.
Materi al".
Title 10,, Code of Federal Regulations Part 50, accendt:
("
R "Fire Protection drogram for Nuclear Power f acilities d.
Ooerating orter to January 1,1980".
United States Nuclear Regulatory Comission Regulatory Guide 1.143 "Design Guidance for Radioactive daste e.
l Management Systems, Structures and Components Installed in t<ignt Water Cooled Nuclear Power Plants".
s.
U. S. Nuclear Regulatory Comiission Regulatory Guide f.
1.29 "Seismic Design Classtfication" and tne seismic ascocts of com onents antCN nave imoact on it!9s imoortant to safety.
Title 10 Code of Federal Regulations, 8 art 50.49,
- tnrironmental Qualification of Electrical hutor"ent g.
Important to Safety for Nuclear 70wer Plants".
l Otner items nen designateo ey tecnnical / unctions.
n.
I Accendix A crovides a comparison of tne sections of tnis 31an with tne reouirements of 10CF450, accendix 3; 10CFR71, Saccart Hi ANSI N18.7: and ANSI N45.2.
The GPUN Operational Quality Assurance Program acoltes to all items on the Quality Classification List (QCL).
The QCL will be periodically updated to include new olant modifications or construction or any changes i,n classification.
The contents of the list will be controlled.
For new design efforts such as olant modifications and new construction, tne classification determination is recorded on design criteria documents. New items will be included in ene OCL. Documents wnich control the installation of Imoortant to Safety modifications will be clearly identified as sucn.
2.2.1 Activities which are Imoortant to Safety snall include, out 90t ce limited to:
These activities covered oy ANSI N18.7 fnd* Accendix A of 4.
o b.
The requirements of other Regulatory Guides acolicable e to ocerations, maintenance, codification, repair and refueling of a nuclear cower olant as identified in Accendix C nerein.
Those activities related to orotection against radiation c.
as covered oy Title 10, Code of Federal Regulaticas, Part 20.
d.
Those activities related to Fire Protecti6n as covered by Title 10. Code of Federal Regulations, Part 50, up Appendix R.
Those activities related to Plant Security as covered by e.
Title 10. Code of Federal Regulations Part 73.55 "Recuirements for Physical Protection of Licensed Activities in Nuclear Power Plants Against Industrial S ab a'ta ge. '
s, f.
Those activities defined by orocedures which have oeen designated during the review cycle as "important to safety."
j
\\
l
- - - - - -, - -. -, - - - _ -,. -.. -