ML20136A918

From kanterella
Jump to navigation Jump to search
Responds to 851023 Request for Guidance on Any Requirement Re Use of N Stamped Equipment in Reactor Thermal Hydraulic Circuits.No Stamping Requirements Contained in 10CFR or in Manuals or Guides
ML20136A918
Person / Time
Site: 05000139
Issue date: 11/14/1985
From: Thomas C
Office of Nuclear Reactor Regulation
To: Robkin M
WASHINGTON, UNIV. OF, SEATTLE, WA
References
NUDOCS 8511200075
Download: ML20136A918 (2)


Text

m =-

.g 9 November 14, 1985 Docket No. 50-139 Dr. Maurice A..Robkin, Director Nuclear Engineering Laboratory

. Department of Nuclear Engineering Seattle, Washington 98195

Dear Dr. Robkin:

SUBJECT:

REQUIREMENT FOR " NUCLEAR GRADE" MATERIAL IN THE " THERMAL-HYDRAULIC CIRCUITS" 0F THE UNIVERSITY OF WASHINGTON ARG0 NAUT REACTOR This is -in regard to your October 23, 1985 letter requesting guidance from NRC on any requirement for use of "N" stamped equipment in the reactor's thermal-hydraulic circuits.

There are no requirements in 10 CFR, nor in the various manuals or guides that' relate to non-power research reactors for the use of "N" stamped equipment in the thermal-hydraulic systems.

If you have any questions, please contact your Project Manager, Harold Bernard at (301) 492-9799.

Sincerely, Original signed by Cecil 0. Thomas, Chief Standardization and Special Projects Branch Division of Licensing, NRR DISTRIBUTION:

5poetet File m NRC'PDR"""'~

DCS NSIC SSPB Rdg HBernard HBerkow CT

\

D

ac O

HBeittow s

/85 11//g/85 11/jd$E85 8511EKUD075 851114 PDR ADOCK 05000139 P PDR

g + 0,, UNITED STATES

[)

O

~

'E g NUCLEAR REGULATORY COMMISSION WASHINGTON, D. C. 20555

% ,,,,,+ November 14, 1985 Docket No. 50-139 Dr. Maurice A. Robkin, Director Nuclear Engineering Laboratory Department of Nuclear Engineering Seattle, Washington 98195

Dear Dr. Robkin:

SUBJECT:

REQUIREMENT FOR " NUCLEAR GRADE" MATERIAL IN THE " THERMAL-HYDRAULIC CIRCUITS" 0F THE UNIVERSITY OF WASHINGTON ARGONAUT REACTOR This is in regard to your October 23, 1985 letter requesting guidance from NRC on any requirement for use of "N" stamped equipment in the reactor's --

thermal-hydraulic circuits.

~

There are no requirements in 10 CFR, nor in the various manuals or guides that relate to non-power research reactors for the use of "N" stamped equipment in the thermal-hydraulic systems.

If you have any Bernardat(301) questions,pleasecontactyourProjectManager, 492-9799. Harold Sincerely, el80. Y v M Cecil 0. Thomas, Chief Standardization and Special Projects Branch Division of Licensing, NRR

.~.