ML20094P470

From kanterella
Jump to navigation Jump to search
Inservice Insp Rept on 830302-840516,describing Exams Performed on Pressure Containment Appurtenance for in-core Instrumentation Flange Assembly
ML20094P470
Person / Time
Site: Saint Lucie NextEra Energy icon.png
Issue date: 08/09/1984
From:
FLORIDA POWER & LIGHT CO.
To:
Shared Package
ML20094P460 List:
References
NUDOCS 8408170237
Download: ML20094P470 (29)
v • d • e


Text

_. . _. .-.

.n.

l l

R -

PORT 1 NIS-1 ONNERS r DATA REPORT FOR INSERVICS. INSPECTIONS

~

As required by the Provisions of the ASME Code Rules .page 1 of 27 l

===========================================================================  ;

. Florida Power;and Light Co. 9250 W. Flagler, Miami, Fla.

'l.-Owner (Name and address of Owner)

St. Lucie Nuclear Power Plant-(formerly Hutchinson Island),

P.O. Box 128, Pt. Pierce, Fl~33454

.2. Plant (Name'and address of Plant)

3. Plant Unit 1
4. Owner. Certificate of Authorization (if requirad) Ji6S
5. Commercial service'date 21 DECEMBER 1976
6. National Board Number for Unit N/A
7. Components Inspected Componetzt.or Manufacturer Manufacturer State or National Apourtenance or Installer or Installe Province Board Serial No. Aumber Number dPV VESSSL COMBUSTION ENG. tI/A ~57A N/A PRESSUdIZdR COMBUSTION EJG N/A ti/A W/A STM. G63. COMdUSIION ENG N/A N/A i4/A RCP PUMP COABUSTION EWG 4/A N/A is/A REACrOR COOLA6T EGA3CO N/A d/A 6/A dAFETI I AJ ECTION ' N/A EBAdCO M/A N/A

~~ ~

AdIN 3rdAM ~ESASCO ~ N/A N/A N/A --

FEEDwATER EBA6CO 6/A a/A N/A

. Note: Suppleaental sheets in form of li3ts, sketches, Hor drawings

.!my be used providad (1) size is 8 1/2 in. x 11 in., (2) information

. iti items 1 through 6 on this data report is included on each sheet,

and (3) each sheet is numbered :and the number of sheets is recorded at the top of this form.

8408170237 8 "

l gDRADOCM05hN5 PDR

1 l

page 2 of 27 1 FORM NIS-1 (back)

8. Examination Dates 3-2-83 to 5-16-64
9. Inspection Interval from. 3 1/3 YEAas to 6 2/3 YEARS
10. Abstract of Examination. Include a list of examinations and a statement concerning status of work reouired for current interval.

SEE ATTACrlED SUPPLEMEat

11. Abstract of Conditions Noted.

SAME AS ICSM 10 ABOVE

12. Abstract of Corrective Measures Recommended and Taken.

SAM 2 AS ITEN1 10 AdOVE We certify that the statements made in this report are correct and the examinations and corrective measures taken conform to t rules o the ASclE Code ,Section XI.

Cate 9 August 1984 Signed FLORICA POXER & LIGHT CO. By , ~

/N& / d Osner f Certificate of Authorization no.(if aoplicable) i4/A Expiration date N/A

- - _ _ _ _ =

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National soard of doiler and Pressure Vessel Inspectors and/or the State or Province of OHIO and emoloyed by__ _ _ _ _ _

__ of h0RAGOD t MASS have inspected .tne comoonents described in this Owners' Data Report during the cariod 3-2-23 to 5-15-64 , and state that to the best of uy knowledge and belier , the Cuner has performed eaa.ainationo and taken corrective measures described in this Owners'

' Data Report in accordance with the reIuirecents of the ASM8 Coda,Section XI.

By signing this certificate neitaer the Inspector nor his employer manes any warranty, expressed or inolied, concerning the examinations and corrective measurcs described in tais Owners' Data Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any oersonal injury or property damage or a loss of any kind arising froia or connected with this inspection.

Date 9 Aunust 1984 FACTOdi MUTJAL SYSTEM d ,d __Commicsionn :18-7719

( Inspector's Signature National Board, state, Province and !io.

l - _ - - - . _ . - -- -. _- . -_ .

  • ARKoR1 Grit DOS f0;J MFG ' S .hdTu % IW3Unne;CE COMPnNY 2 ,
  • UI 27-SUPPLEMENTAL SHEET NIS-1
1. Owne'r: Florida Power & Light Co.

9250 West Flagler Miami, Florida 33152 2: . Plant: St. Lucie (formerly Hutchinson Island)

P.O. Box 128-Ft. Pierce, Florida 33454

3. Plant Unit : 1 4.' Owner Certificata of Authorization : N/A
5. Connercial Service Date: 21 December 1976
6. national Board Number for Unit: N/A
10. REPORT NUMBER ORGANIZATION DESCRIPTION OF SERVICE CIG-PSL-001 FPL INS ERVICE INSPECTION VOLUME I THROUGH VOLUME II SdRI MECHAJIZED EXAMINATION VOLUME I THROUGd VOLUAE V EC f-PS L-001 FPL EDDI CURRENT EXAAINATIOS OF STEAM GENERATORS IR-ISI-035 CE REACf0R VESSEL VISUAL I.4T SRN AL AND INFERIOR EXAMINATIO4 REPORT AET-2-1984 FPL FEEDdATER PIPIJG REPORT PC/M 10b-J2 CE RPV CLOSURE HEAD MODIFICATIONS PC/A 254-163 EPL FEBC .sATER PIPING REPLACEF16.NT SdRI 5179 SWRI 1984 IWSERVICE INSPECTION REPORf VOLUclE I friROUGd VI IR-ISI-029 CE RPV CORS SUPPORT SARREL NONDESTRUCTIVE EXAMINATIOa REPORT SECTION I THROUGd III 3

y =

u .

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As required by the provisions of . the ASME Code Seccion XI

_==========================================================================

1. Owner FLORIDA POWER & LIGHT CO. Date 9 AUGUST 1984

.name P.O. BOX 529100 MIAMI, FLORIDA 33152 sheet 4 of 27 address ST. LUCIE 1

2. Plant Unit name P.O. BOX-128, Fr..PIERCS, FL. 33454 PC/M NO. 108-82 addresa repair organization P.O. No.

job Go., etc.

COMBUSTION ENG. INC. NONE

3. Work Performed by- Type Code Symbol Stamp name N/A 1000 PROSPECT HILL ROAD Authorization no. _

EAST WINDSOR, CONNECTICUT N/A Expiration Date addreas REACTOR PRESSURE VESSEL

4. Identification of system _ _ _ _
5. (a) Applienble Construction Code SBCTION III 1980 Edition, 1980 NINTBR ADD 6NDA (b) Applicable Edition of Section XI utilized for repairs or replacementa 1974 EDITION
6. Identification of components repaired or replaced and replacement components Name of Name of Mfrs. Ser. Nat'l Crn O the r Year Repaired ASME Code Component Mfr. No. Bd. No. Ident- Built Replaced stamped No. ifica- or reol- (yes,no) tion acement

~

19367-150 MODIFI-RPV. CE 19367-151 N/A N/A N/A N/A CATION YES 19367-152 h0DIFI-dPV C6 19367-153 N/A d/A N/A N/A CATIOW YES

~~

I9367-154 MODIFI-RPV Ce 19367-155 N/A N/A N/A N/A CATION YES

~

[9367-156 l MOD T.FI-RPV- CS 19367-157 N/A N/A N/A N/A CATION YES t- g- e

O  ;;

page 5 of 27 FORM NIS-2 -

SEE SUPPLEMENT SHEET, PAGE 6 OF 27

7. Description of work
8. Tests Conducted: Hydrostatic _X__ Pneumatic __ Nominal Operating Pressure Other__ Pressure 2340 psi Test Temp. 400 F ICCS MODIFICATION TO THE-REACTOR PRESSURE VESSEL CLOSURE
9. Remarks (Applicable Manufacturer's Data Report to be attached)

HEAD, N2 DATA REPORT FOR THE RVLMS FLANGE ASSEMBLIES ARE ATTACHED

CERTIFICATE OF COMPLIANCE To certify that the statements made in this report are correct and this MODIFICATION conforms to Section XI of the ASME Code.

( Repair or Rep}acement N /) PNS SECTION SUPERVISOR 9 AUG 1984 (Owner or Owner's Designee) (Title) (Date)

I CERTIFICATE OF INSPECTION I, the Undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of OHIO employed by ** of NORWOOD, MASS have inspected the MODIFICATION described in this report on 9 AUGUST 1984 and state that to the best of my knowledge and belief, this repair or replacement has been constructed in accordance with Section XI of the ASME Code. By signing this certificate, neither the Inspector nor his employer takes any warranty expressed or implied, concerning the repair or replacement described in this report. Furthermore j , neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

Date 2-T- N ad 8

( Inspector )

M Commissions FACTORY MUT A Y TEMS (State or Province, National i Board)

    • ARKWRIGHT BOSTON MFG'S MUTUAL INS. CO. l 2 I l
. o .

NIS-2 SUPPLEMENTAL 6HEET i i PAGE 6 OF 27-

1. OWNER: FLORIDA POWER & LIGHT DATE: 9 AUGUST 1984 P.O. BOX 529100 '

s MIAMI, FLORIDA 33152

2. PLANT: ST. LUCIE ,

UNIT: 1 P.O. BOX 128 FT. PIERCE, FLORIDA 33454

'3. WORK COMBUSTION' ENGINEERING JOB NO. PC/M 108-82 PERFORMED 1000' Prospect Hill Road BY: , EAST WINDSOR,-CONNECTICUT

4. IDENTIFICATION REACTOR PRESSURE VESSEL HEAD OF SYSTEM:
7. DESCRIPTION COMBUSTION \ ENGINEERING PERFORMED THE DESIGN AND OF WORK: FABRICATION OF THEcFLANGE ASSEMBLY.

COMBUSTION EUGINEERING PERFORMED THE INSTALLATION AND WELDING OF'THE RVLMS FLANGE ASSEMBLY.

COMBUSTION ENGINEERING PERFORMED THE INSTALLATION OF THE INSTRUMENTATION LINES.

COMBUSTION ENGINEERING PERFORMED THE STRESS ANALYSIS ON THE RPV ICI FLANGES.

COMBUSTION ENGINEERING PERPORMED VISUAL AND LIQUID PENETRANT EXAMINATION ON THE BUTT WELDS.

FPL PERFORMED THE HYDROSTATIC PRESSURE TESTS.

FPL PLANT QC BACKFIT PERFORMED THE RADIOGRAPHIC EXAMINATIONS.

1 e f

e 3

1

tilt \1 N. ' \1 \\l I \1 ll lil.l:- 11VI A 1:!.i'lif ti I 01: Ni Cl.i. ti: P \;;l A\ll \l'PI'l:'ll3 \ SCI,.s.

A required I.. the Prmi i..n- of the A91E C de Itale'

- Page 7 of 27

. (s) Atanufactured t,y Combustion Enoineerino Inc. . East Windsor. Connecticut - 1 (Name and address of Manuf acturer of pen)

<bi Aranufactured fo, Florida Power and Licht Co.. St. Lucie Plant. Unit 1 (Name and address of Manufacturer of eemple'ed nuclear eemponent)

2. Identificationaf anufacturer's Serial No. of Pau 19367- 150 Nat'l Bd. No. N/A (t) Constructed According to Drawing No. E-19367-165-011,a.in, 0 p, epa,ed byNuclear Products Manufacturing (b) Description of Part Inspected Flance Adaoter Asserr,tly Winter -

(s) Applicable ASSIECode:SectionIII, Edition 1980 , Addenda date19AO , Case No. N/A Class 1 Rsmarks: Pressure Containment - Annurtenance for an in Coro instrumentatinn Flanno (Belef 'descripties of servate fee which tempenent was desagned) "

/Assefrbly. This appurtenance is attached by welding to a Closure Head Instrument Nozzle.

t Te cenif) that the seatements made in this report are corieet and this vessel part or appurtenance as defined in the Code con-ferma to the rules of construction of the ASME Code Section III.

(Thz applicable Design Specification and Stress Report are not the responsibility of the part Afanufacturer. An aepurtenance afaufacturer is responsible for furnishing a separate Design Specification and Stress Report af the appurtenance is not included la ihr componen Design Specification and Sitess Report.)

Dts: O 19 Signed f'nmhne ti nn Fnn By _

..n.,e<_r,I n r*- -

ertificate of Authorize en Empires ADPil 7 19R4 K.C. Tolides-Quality Control Mang*

Certificate of Authorizacion No. NPORo CERTIFICATION OF DESIGN FOR APPORTENANCE (when applicable)

D: sign information on file at Conbustion Enoineerino Inc. . East Windsor. Connecticut -

Sitess analysis report on file at Combust 19RhEncineering Inc., East Windsor. Connecticut Dreign specifications certified by D.J. McLauchlin Prof. Eng.Srate Ct. Re,. No.79 55 Strass analysis report certified by Frank P. Hill Jr. p,of. Eng. Sim,, Tenn Reg.No. 5275 I

CERTlFICATE OF SHOP INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vesse! Inspectors end/or the State or Province of Hartford ana employ,a hy Ha rtfne-I <staam Rnilar T Jt, T rn of Hartford. Connecticut have inspected the pari of a pressure vessel described in this Mrnifacturer's Partial Data Report on MM 19M, and state that to the best of my knomledge the Manufa:turer has constructed thi(part in accordance with the ASME Code Section III.

stdEybelief,ing sign this certificate, neicher the Inspector not his employer makes any warranty, expressed ,

or i ing the part described in this Manufsecurer's Par Isl Data Report. Furthermore, s.either the Inspector not his employer shtll be liable in any manner for any personal injury or property damage or a loss of any kind stasing from or connected arish this inspection.

Ditt U 19 Inspector's fagnature Commission s T

,[ Netsenel Beerd. Srete Province end No.

I

- eSup' hmettet sheets an form of lasts, sketches or drawanse may be esed preveded (1) same as 8%" a It**. (2) anformation an items 12 en s.hss

, cces report se included on each sheet, and (3) each sheet is nurabered and number of sheets is reeerded an stem 3, ** Remarks.

I

I:: :\1 N.2 si\Nt I \f.1( I:1.1;-IlR\ lll.I'Ulti 101: Nt:GI.I. \l: 1.' \ lit ANil -\l'I'I'It i EN \N(.l. * '

. or

. A% fequired to the l'fmi-inns of the A. \lE Code I!ule* Page 8 of 27

- ~4

. f t) Manufactured by Combu$ tion Enoineerino (N..e Inc. . East

.nd .ddre. Windsor.

. .f u. Co.nnecticht nut.e t.,er .a , n>

(biManufactured for Florida Power and Liaht Co. . St. Lucie Plant. ' Unit 1 (Name and address of Manufacturer af completed nuclear component)

2. Ideneification4f anufacturer's Serial No. of Pan 19367-151 war.1 Bd. No. N/A i ..

(t) Construered Acco. ding to Drawing No.E-19367-165-01 br==ing Prepared b> Nuclear Products Manufacturing p

(b) Description of Part Inspected Flance Adaoter Assemb1v -

Winter (c) Applicable ASMECode:SeesionIII, Edition 'l9AO , AddendaduelQAO , Case No. N/A C1as: 1'

. Rsmarks: Pressure Containment Annurtenanen for an in Coro inetromantatinn Flanos ~

(Brieffdescriptten of service for which component was desissued)

Assembly. This appurtenance is attached by welding to a Closure Head Instrument Nozzle. .

~

r Te certify that:he statements made in this e ort are correct and this vessel part or appurtenance as defined in the Code' con-fenes to the rules of construction of the ASME Fode section iii.

(The applicable Design Specification and Stress Report.are not the resnonsibility of the part Manufacturer. An appurtenance, Muufacturer is responsible for furnishing a separare I)esign Specification and Stress Report af the appurtenance is not included ~

im ihr componen: Design Specifica ion and Stress Report.) e.

nerp ) _ _ 19 Signed F etmhne tinn Inn- Tne U" *""' #"" '

By e K.C'. Tolides-Quality Control Mang.

Certificate of Authorization Espires Anril 7.1984 Certificate of Auihoriancion No. N2nRQ CERTIFICATION OF DESIGN FOR APPURTENANCE (when applicable)  !

Design informaron on fil, , Combustion Enaineerina Inc. . East Windsor. Connecticut sirsse analysis repor: on file as Combustion,Enaineerina Inc. . East Windsor. Connecticut D2 sign specifications certified by D.J. McLauchlin Proc Eng.Staie Ct--

Reg.No.7955 5 rssa analysis report certified by Frank P. Hill Jr. p,of. Eng. Si ste Tenn R,,.s 5275 CER11FICATE OF SHOP INSPECTION I, she undersigt.ed, holding a valid commission issued by the National Board of Boiler and Pressure Vesse! Inspectors and/or the Searc.or Province of Hartford and employed by Hartford Stpam Rnilor iAT rn of Hartford. Connecticut .

ha,e ;nspecied i e part of a pressure vessel described in his Manufacti'rer's Partial Data Report on WM 19 . and state that to the best of my knowledge and belief, the Manufacturer has constructed this part in accordance with the ASME Code Section III.

By , signing this certificate, neither the Inspector,nor his employer a skes any warrancy, expressed or implied, concern.

ing the ipart described in this Manufacturer's Partial Data Report. Furthermore, i.either the Inspector not his employer shtll be liable in any manner for any personal injury or property damage or a loss of any kind stasing from or connected mith this inspection.

Drit 19

  1. Commission s

~

National Boerst. State, Province and No.

~ '

Inspector's 5sgnature [

e5vestimental sheets an form of lasse, sketches er drawanse may be used provided (1) asse as 8%" a 11". (2) a,nformation in stems 3 2 en thse dEss report as sneluded on eseh sheet, and (J) each sheet as nusebered and muse >er of sh ens is secorded an steen J. "3temarks".

i

. \ 3, ~? 1.

o 1

,I ul:si N .: \1 \st I \t ii 1:! 1:- 0 \~1 \ 1:I.imirl I ol; st (.l.1. si; !".:. i .\ sis \lal.: lrg g;s gscg, e

. .\ required l>y tite l'rovi~ ion of the .\-ill; re,de I ult - Page 10 of 27

( 35fanufactured by Combustion Engineerino Inc.. East Windsor. Connectient - 1 (Name and address of Manuf acturer of part)

(b) Stanufactured fo, Florida Power __gnd Licht Co. . St. Lucie Plant. Unit 1 (Neme and address of nf anufacturer of completed nuclear evenponent)

2. Id:ntifientionAfar.ufacturer's Seriet No. of Part 19367-152 _::aet Bd. No. N/A (t) Constructed According to Drawing No. E-19367-165-Olb, awing p, epa, d b/luclear Products Manufact_utring (b) Description of Part Inspected F1anoe Adaoter Assemb1v Winter (s) Applicable ASafECode:SectionIII, Edition 1QAO , AddendadanelQRO , Case No. N/A Class 1 Rsmark s: Pressure Containment Anourtenanen for an In Core Inetenmentatinn Flanna (Brief 'desertption of service fee which component was designed) ~

Assembly. ThiS appurtenance is attached by welding to a Closure Head Instrument Nozzle.

l Te certify thatthe seatements made in this report are correct and this vessel part or appurtenance as defined in the Code con-farms to the rules of construction of the ASNf E Code Section III.

(The applicable Design Specification and Stress Report are not the responsibility of the part nianufacturer. An appurtenance Alcaufacturer is responsible for furnishing a separate Design Specification and Stress Report af the appurtenance is not included in ths component Design Specification and Stress Report.)

Dres -3 19 SignedCnmhnc tinn Fnn T n r. _

By- 4 K.C. Tolides-Quality Control Mang.

t.sreificate of Authorization Empires Aoril 7. 1984 Certificate of Authorization No. N90RQ CERTIFICATION OF DESIGN FOR APPURTENANCE (when applicable)

Dirign information on file at Combustion Enoineerino Ing . East Windsor. Connecticut Stress analysis report on file at CombuSti_gn,Encineerino Inc. . East Windsor. Connecticut Drsign specifications certified by D.J. McLauchlin prof. Eng. State Ct- Reg. No.7.9.5L Stress analysis report certified by Frank P. Hill Jr. p,of. Eng. St ate Tenn Reg.No. 5275 CERT 1FICATE OF SHOP INSPECTION 1, she undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and/or the State or Province of Hartford and employed by Ha rtforti Rteam Rnilar iAT rn af Hartford. Connectient haee ;nspeered the part of a pressure vessel described in this afsamfacturer's Partial Data Report on NO 19d, and state that to the best of my knowledge std belief, the %f anufacturer has .onstruered thi(part in accordance with the ASstE Code Section III.

By signing this certificate, neither the Inspector not his employer makes any warranty, expressed or implied, concern-ing the part described in this Manufacturer's Partial Data Report. Furthermore, t.either the Inspector nor his employer rhtll be liable in any manner for any personal injury or property damage or a loss of any kind arssing from or connected with this inspection.

Dies 42 19 Y Commission s Inspector's Signature g National Board. State, Province and No.

'Sup;Itansstal sheets in forms of lists, sketches er drawsngs may be Osed provsded (1) asee as 4%' a II", (2) informatson in items 12 en thas data report is 6ncluded en ameh sheet, and (3) each sheet is numbered and number of sheets is recorded in item 3, " Remarks".

I ::1:41 s.2 \1 \\l i U.1I'l:1.1: IWI \ 1:1.I'01:I l'Ol; NIII.131; l' \101 \NO \l'I'l 1:~lI.\ \\ f.i..

  • L A% required by 11 e l'rovisions of th, A.-\11. Codell!ule' Page 12 of 27

(

1 hl waufactured by Cornbustion Engineerina Inc. . East Windsor. Connecticut - 1 (Nesne and addres s of Manuf acturer of part) -

(bl Manufacio,ed fo, Florida Power and Licht Co.. St. Lucie Plant. Unit 1 l (Name and 'eddress of Manufacturer of completed nuclear component)

2. IJintification.*.f anufacturer's Serial No. of Pan 19367-153 Nat'l Bd. No. N/A lL' (c) Constructed According to Drawing No. E-19367-165-01 b,a.in, p, epa,ed b> Nuclear Products Manufacturing (b) Description of Pan Inspected Flance AdaDter Assembly Winter (c) Applicable ASMEcode:SectionIII Edition 19AO , Addendadatel4RO , Case No. N/A Class 1 Ramark s: Pressure Containment Annurtenanen for an in Cnrp Instenmentatinn Flanna (Brief descriptism of servace for which component was designed)
  • Assembly. This appurtenance is attached by welding to a Closure Head Instrument '

Hozzle.

Te cenify thatthe statements made in this report are correct and this vessel part or appurtenance as defined in the Code coo.

firms to the rules of construction of the ASME Code Section III.

(The applicable Design Specification and Stress Report are not the responsibility of the pan Manufacturer. An appunenance Mmfacturer as responsible for furnishing a separate Design Specifiestion and Stress Report af the appurtenance is not included iJe ihr component Design Specification and Stress Repon.)

DIts k A3 19 Signed Cnmhne ti nn Fnn_ T n t. #

(Manuf acf urer)

By _

  1. M K. Ce Tolides-Quality Control Mang.

urtificate of Authorization Espires Aoril 7. 1984 Certificate of Authorization No. N20RQ CER11FICATION OF DESIGN FOR APPURTENANCE (when applicable)

Dnign informaiion on file at Combustion Enaineerina Inc.. East Windsor. Connecticut Stress analysis report on file at Combustion,Enaineerina Inc. . East Windsor. Connecticut Duign specifications cenified by D.J. McLauchlin p,of. Eng. State C t - Reg.No.7955 Stress analysis report certified by Frank P. Hill Jr. Prof. Eng. State Tenn Reg.No. 5275 a

CERT 1FICATE OF SHOP INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors an#er the State or Province of Hartford and employed by Hartford Steam Rnilar T AT rn ef Hartford. Connecticut have inspected the pan of a pressure vessel described in ihis Mer.ufacturer's Panist Data Report on CWA 19.b.T. and state that to the best of my knowledge end belief, the Manufacturer has constructed this part in accordance with the ASME Code Section III.

Ey si ning F this certificate, neither the Inspector not his employer makes any warranty, expressed or implied, concern.

ing the pan described in this Manufacturer's Partial Data Report. Furthermore, i.either the Inspector nor his employer sh:ll be liable in any manner for any personal injury or property damage or a loss of any kind stasing from or connected with this inspection.

Date 8 19

  1. M Commissions  !

Inspector's 5ssnature [/ Netsons: Beard. State. Province and No.

, e$untsmpstet sheets in form of lists, sketches or drawaries may be used provided (1) e6se as 8Va" a 13",(2) informasson in items 12 wn than i Cats sogen as 6ncluded en each sheet, and (J) each sheet is numbered and number of sheets is recorded in item 3, " Remarks".

a -

101:\1 N..' \t \\11 \f 111:1.):- D \~1 A I;I.I'Olil i Oli \l'Cl.i. \l: l' ti I \ Nil gl'I'l IrlI.N \N( l. *

, A% re quired 1,y ti.c l'rovisions of the AMll; Li. le 1 ule- Page 14 of 27 l f.) uanufscio,ed by, Combustion Enoineerino Inc. . East Windsor. Connecticut - 't (Meme and address or Menuleetierer of part)  ;

(bluanufmero,edfo, Florida Power and Licht Co.. St. Lucie Plant. Unit 1 I (Name and address of Manufacturer of templeted nuclear esopenent)

2. Id nrification. Manufacturer's Serial No. of Pan 19367 154 s ate ! Ba, no. N/A (t) Constructed According to Drawing No. E-19367-165-Olbra ing prepa,ed b> Nuclear Products Manufacturing (b) Description of Part Inspected F1anae Adaoter Assembly Winter (c) Applicable ASMECode:SectionIII, Edition 19AO , Addendadatel4RO , Case No. N/A class 1 Remark s: Pressure Containment Annurtenanen for an in Coro inctenmentatinn Flanna (Betof 'desersption of service for wluch coniponent wee designed)
  • Assembly. This appurtenance is attached by Welding to a Closure Head Instrument Nozzle. -

te certify that the ser.tements made in this report are correct and this vessel part or appurtenance as defined in the Code con-ferms to the rules of construction of the ASME Code Section III.

(The applicable Design Specification and Stress Report are not the responsibility of the part Manufacturer. An appurtenance Man afacturer is responsible for furnishing a separate Design Specification and Stress Report af the appurtenance is not included la the componen Design Specification and Stress Report.)

Date 19 Signedf'nmhnc tinn Inn Tru _ By Aoril 7. load X.C. Tolides-Quality Control Mang.

t.ertificate of Authorization Empires certificace of Authorization No. NPORQ CERT 1FICAT10N OF DESIGN FUR APPURTENANCE (when applicable)

Design informaiion on filc ar Combustion Enoineerino Inc.. East Windsor. Connecticut Stress analysis report on file at Combustign,Enaineerina Inc. . East Windsor. Connecticut j D sign specifications certified by D.J. McLauchlin p,of. Eng. State C t - Reg.No.79 55 Stress analysis report certified by Frank P. Hill Jr. p,of. Eng. St ate Tenn R eg. xo. 5275 CERT 1FICATE OF SHOP INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Yessel Inspectors cad /cr the Siste or Province of Hartford and employed by Hartford steam Rnilar i Ai rn of Hartford. Connecticut . have inspected he of a pressure vessel described in tnis -

l Manufacturer's Partial Data Report on cM i d,part and state that to the best of my knowleJge end belief, the Manufacturer has constructed this gfart in accordance with the ASME Code Section !!!.

By signing this certificate, neither the Inspector not his employer makes any warrancy, expressed or innplied, concern-ing the part described in this Manufacturer's Partial Data Report. Furthermore, i.either the Inspector nor his employer shcIl be liable in any manner for any personal injury or property damage or a loss of any kind arasing from or connected with this inspection.

D:te 19

  1. Commission s Inspector's 5sgnature Netsenal Beerd. Siste. Province end No.

i *$u7piemss,tel sheese in form of lasts, sketches or drawings may be used provaded (1) ease as 8%" a 13". (2) anterinetaan in items 12 on thas ,

dass resset as included on each sheet, and (3) each sheet is numbered and number of sheets is reeerded in stem 3. " Remarks". '

i

~

u -i I

- i

. e 111ll\1 N .: \1 *,' I I \s ii 1:1.i .- Il VI A 1ll.I'Olt I I 01: M (.l.1.si: la ti;I gsti gl lig l: TIN \NCL *

- b re guired ley the Provi ion , of ilic \. \lE C,ule !!ules Page 16 of 27 l

. _ _ _ = - - -

(ej uanufaceured by Combustion Encineerino (u.me .nd .d.es s .,Inc. . East

u. nut.eiu,e, necticut

., Windsor. Co.n3 - ~4 r

(b) Manufactured fo, Florida Power and Licht'Co.. St. Lucie Plant. Unit 1 (M.a.e .nd .ddress .( Manufacturer .t e.mpleted nucle.r e.mp.neri) 1 Identification.Manufserver's Serial No. of Pa,e 19367-155 nai : sd. no. N/A (i) Coostructed According to Drawing No. E-19367-165-0110,s.i.s p, epa,ed b> Nuclear Products Manufacturing (b) . Description of Part Inspected Flance Adaoter Assembly Winter *

(c) Applicable ASMECode:SectionIII, Edition 1980 , Addendadece1QR0 , Ca se No. N/A Clas 1 Remarks: Pressure containment Annurtananea for an in Cnre instromantatinn Flanna (arier de .e,,,ii.n .< .e,wice t., .n.e., e.m,.nen. ..e de. sn. ) -

Assembly. This appurtenance is attached by welding to a Closure Head Instrument Nozzle.

Te certify that che sessenienes made in this report are correct and this vessei part or appurtenance as defined in the Code coa.

fenns to the rules of onstruction of d e ASME Code Seerion III.

(The rpplicable Desisa Specification and Stress Report are no the reeponsibility of the part Manufaeruter. An appurreaanee Mtnufacturer is responsible for furnishing a separate Design Specificacion and Stress Report af the appurtenance is not included la thy componen: Design Specifiention and Stress Report.)

Dies 3 19 Signed rnmhnc tinn Enn i n ,- By _

(M. nut.ct urer) certificate of Authorization Empires Aoril 7.1984 K.C. Tolides-Quality Control Mang.

Cercificaie of Ausho.izacion so. N90RQ CER'IlFICNIl0N OF DESIGN FOR APPURTENANCE (when applicable)

Derign informacion on filc a: Conbustion Enoineerino Inc. . East Windsor. Connecticut Sirs . analysis repor on file == Combusti_gn,Encineerino Inc.. East Windsor. Connecticut Dreign specifications certified by D.J. McLauchlin Prof. Eng. Sca,e Ct. R,g.no.7955 Sirsss analysis report certified by. Frank P. Hill Jr. p,of. Eng. simie Tenn a,,,go,.5275 CERTIFICATE OF Sil0F IN5PECTION I, che, undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and/cr the Scare or Province of Hartford and employed by Ha rtfnrd c;taam Rnilar- T A T rn  !

of Hartford. Connecticut ha,, ;nspected the part of a pressure vessel described in this I Mi*7 Minyfacturer's Partial Data Report on 19A."7., and state that to the best of my knowledge end b11ief, the Manufacturer has constructed this part in accordance with the A' ale Code Section !!!.

By signing this certificate, neither the Inspector nor his employer makes any warrancy, expressed or implied, concern.

ing the para described in this Manufacturer's Partial Dana Report. Furthermore, i.either the Inspeesor not his employer

, sht!! be liable in any manner for any personal injury or property damage or a loss of any kind stasing from or connected sieh this inspection.

Diet M 19 E

-- # ' Commissior s  ! l

- ins,ee,.r.s ..s, .ure y s .o .n. ,

..ed. .. .. e . r.o. e e . d u ..

! e$urp31.itnt.I sheets an f.run .f 16sts, sketches .c dr.arings us.y be used pr.wided (I) saae to s%" a 31", (2) ant.rm.tsen an atens 3 2 .a this does report as sneluded .n e.ch sheet, .nd (J) e.ch sheet is numbered and number af sheets is ree.rded in stem J " Remarks".

l l

,,,n,n,,,, , , - - - - , - - , , , , -.e., e-y- e-.-,

. D.

4.

v

  • (C-I olot N. :'4 W I u il 1:1.i:- 11\TA 1:1.I't:!:1 Iill: W(.l.1.\l: P tirl Asin gl'I'l fri1.s \NtlV . -

As r. quired by the Provisions of the AMIE Code 1:ules Page 18 of 27 (n

1

'. (ap ilanufse ured by Cof3bustion Engineerina Inc. . East Windsor. Connectient - 1 1 (Name and address of Manuf seturer of pert) l

<b) .uanufactured fe, Florida Power and Licht Cqa_, St. Lucie Plant. Unit I l (Name and address of bf anufacturer of completed nuclear component) I

2. Identification 4fanufacturer's serial No. of Part._19267 156 sa. Bd. No. WA j i

(c) Constructed According to Drawing No. E-19367-155-Ol b,s.;ng p, epa,ed b> Nuclear Products Manufacturing I FIPnae Adaoter Assembly i

i (b) Description of Part inspected Winter I' (c) Applicable ASMECode:SectionIII, Edition IQR0 , AJdenda darel 9RO , Case No. N/A' Clas: 1

. Rsmarks: Pressure Containment Annurtonance fnr an in Cnre Tns:tenmentatinn Flanno ,

(Setel' description of service for which component was designed) ~, ' '

Assembly. This appurtenance is attached by welding to a Closure Head Instiument M No22le.

Te certify shat che sincemenes made in this report are er treet and this vessel part or appurtenance as defined in the Code con-ferma to the rules of construction of the ASME Code Section III.

(The rpplicable Design Specification and Stress Report,are not the responsibility of the part Manufacturer. An appurtenance Manufacturer is responsible for furnishing a separace Destan Specification and Stress Report if the appurtenance is not included in th componen: Design Specification and Stress Report.)

ngs, M8 19 s;gned Enmhns: tinn Fnn Tne By -~

(" * ""#"""

~~

Aoril 7.1984 K.C. Tolides-Quality Control Mang.

Certificare of Authorization Empires Ce,rificace of Authorizacion No. N?nRQ CER11 FICA 110N OF DESIGN FOR APPURTENANCE (when applicable)

Dstign informaiion on fil, a, Colabustion Enoineerina Inc. . East Windsor. Connecticut Sarsss analysis report on file at Combusti_gn,Encineerina Inc. . East Oindsor. Connecticut Dzsign specifications certified by D.J. McLauchlin prof. Eng. Stat e Ct- Reg.No.7955 Stress analysis report certified by Frank P. Hill Jr. p,of. Eng. St a,, Tenn R e,. go. 5275 CERT 1FICATE OF S110P IN5PECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors tnd/or the State or Province of Hartford and employed by Hartford (:taam Rnilar i AT rn cf Hartford. Connecticut ave inspected ihe pari of a pressure vessel described in this Mrnufacturer's Partial Data Report on MM 19M and since that to the bes: of my knowledge end belief, the Manufacturer has constructed this psf in accordance with the ASME Code Section III.

By signing this certificate, neither the Inspector nor his employer makes any warrancy, espressed or i:nplied, concern.

ing the part described in this Manufacturer's Partial Data Report. Furthermore, s.either the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

D ss N 19

/ A' Ins' pester's Sagnature W' Commissions

[ Natione Board, 5 ste, Province and No.

j 'Suppigenttet sheets an forum of lists, sketches se dreerangs esay be used provided (1) stee as 8%" a 31", (2) informatson H stems 3 2 on thss dies report as included on asch sheet, and (3) eash sheet as nursbered and number of sheets as recorded in item J. " Remarks".

w .,

9 101:\1 N-2 \1\NI I \l.1I I:11 ' il\'l A 1:1.I'(:Iri i fil: NtTI.I.\it P \l:T \ Nil \l'Pl~l:Tl;N \N(.1.**

A- reqeired I y clic Pressi% ion . of ilir AMIE Code Rule .

Page 20 of 27 e

ter Manufaceu,ed by Combustion Engineerina Inc. . East Windsor Connecticut - 1 (Name enc edd-ess of Manuf acturer of pers)

(b) uanuf acau,ed fo,_ Florida Power (Name and and Liaht Co_.. St. Lucie_ Plant. Unit 1 address of Manufacturer of completed nueseer component)

~ 2. Idreification.stan.;facturer's Serial No. of Part._l9267 157 sat 1 Bd. No. N/A (c) Constructed According tc, Drawing No.E-19367-155-01b,s.ing p, epa,.d by Nuclear Products Manufacturing [

r i'

, (b) Description of Part Inspected _ F1anae AdaDter Assembly Winter  ?

(c) Applicable ASMECode:Section!!!, Edition 19AO , Addendadate19RO , Case No. N/A class 1  ;

Asmark s: Pressure Containment Annurtenanen for an In core instrumentatinn Flanna (Brief 'deserspiten of service for whsch component was desagr.ed)

~

Assembly. This. appurtenance. is attached by welding to a Closure Head Instrument Nozzle.

We certify thatthe statements made in this report are correct and this vessel part or appurtenance as defined in the Code con-fanns is the rules of esnstruction of the ASME Code Section III.

(The rpplicable Design .Sr.ecification and Stress heport,are not the responsibility of the part Manufacturer. An appurtenance Minufacturer is responsiole for furnishing a separate Design Specification and Stress Report af the appurtenance is not included in the componen Design Specification and Stress Report.)

D=st E3 19 signedrnmhne tinn Inn i n ,- By (Manufsedar'er) K.C. Tolides-Quality Control Mang.

Aoril 7. 1984 Certificane of Aoihorisation No. N20RQ Certificate of Authorisation Empires CERTIFICATION OF DESIGN FOR APPURTENANCE (when applicable)

Design information on file s, Combustion Enaineerino Inc. . East Windsor. Connecticut Stress analysis report on file as Combusti.An,Encineerina Inc.. East Windsor. Connecticut Drsign specifications certified by 0.d. MClauchlin _. Prof. Eng. State Ct - Reg.No.79 55 3

  • Il UI- P rof. Eng. St ate Tenn Reg.No. 5275 Serres analysis report certified by r CERTIFICATE OF SHOP l.NSPECTION I, the undersigned, holding a valid Fommission issued by the National Board of Boiler and Pressure Vessel Inspectors end/sr the Sense or Province of Hartford and employed by Hartford steam Rnitor iA T en of Hartford. Connecticut have inspected the part of a pressure vessel described in this Mrnuf acturer's Partial Data Report on M 19M, and state that to the best of my knowledge and belief, the Manufacturer has constructed this'part in accordance with the ASME Code Section !!I.

By signing this cenificate, neither the Inspector nor his employer raskes any warranty, expressed or implied, concern.

ing the part described in this Manufseturer's Partial Data Report. Furthermore i.either the Inspector nor his employer shtll be liable in any manner for any personal injury or property damage or a loss of any kind stasing from or connected with this inspection.

, Dite oU 19 O

/ Commission s National Bosed, $ rate, Province and No.

-Insporter's Sagnature

[-

  • Sup;liminnel sheets in form of lists, sketches or.#raerings may be used provided (1) size as 8Pa** a ll". (2) anfor asion in : ems 12 on ihas esta report se sneluded on each sheet, and (3) each sheen is nusebered and number of sheets is recorded an item J ** Remarks".

I

~. ,

+ ;; .

w ,

+

1 p,

e4 I: FORM NIS-2 OWNER'S REPORT' FOR . REPAIRS OR' REPLACEMENTS

^

' As ;requirad :by Lthe = provisions- of the ASME Code Section XI-

======================================== =======q==================.

9 AUGUST.1984

~

fl. Owner FLORIDA POWER & LIGriT CO.- Date

.name

' -P.O.. BOX'529100- MIAMI,_' FLORIDA 33'152 sheet: 22~ of -2.7 ,

s address

ST. 'LUCIE ; 1

=22 Plant ~ Unit

.name P.O. BOX 1128, . Pf. - PIERCE, FL.-33454 PC/M NO. 254-183

. address repair organization P.O._No. ,

job.No., etc.

SEE ATTACHED SUPPLEMEdT' .NONE 3." Work. Performed by Type Code Symbol- Stamp name- 'N/A Authorization no..

N/A-

~~

Exciration Date

, ' address STEAM GENERATOR FEEDWATER SYSTEM ,

.4.- Ideatification ofasystem-5.-(a) Acolicable Construction Code SECTION III 1965 Edition, 1967 WInfBR ADDENDA & B31-7-1969 EDITION (b) Applicable Edition of Section XI utilized for repairs or replaceconts~1974 EDITION TO Sus 4Ed 1975

6. Identification of components repaired or replaced and replaceiaent couinonents daae of Natae or Mfrs. Ser. Nat'l Crn Other Year Repaired ASME Code Coinponen t Mfr. No. Bd. No. Ident- Built Replaced stamped

. No. ifica- or repl- (yes,no) tion ace'nent

~~

FW NO4%LE 32583-1 18-BF- REPLACS-SAFE Edo CE N/A N/A 51 N/A -MENT NO 32583-2 ld-OF- REP LAC E- ,

CE d/A N/A 52 N/A -MENT NO l

~~ '

. . . 16-BF- REPLACE-

.ELB045 HUB,1NC N/A N/A 6/A 51 N/A -MENT NO 18-BF- REPLACE-HUB,INC A/A N/A N/A 52 N/A -MENT NO 1

~

. - -. . . . - - -. . . ~ . . . . - _ - . - . . . - . - , . - . , - , _ . . .

. O ..

a page 23 of 27 FORM NIS-2 SEE SUPPLEMENT SHEET, PAGE 24 OF 27

7. Description of work
8. Tests Conducted: Hydrostatic _X__ Pneumatic __ Nominal Operating Pressure Other__ Pressure 1250 psi Test Temp. 100 F STEAM GENERATOR FEEDWATER NOZZLE SAFE END AND ELBOW
9. Remarks (Applicable Manufacturer's Data Report to be attached)

REPLACEMENT. LOOP A & B NOTE; NO MANUFACTURER'S DATA REPORTS ARE ATTACHED CERTIFICATE OF COMPLIANCE To certify that the statements made in this report are correct and this REPLACEMENT conforms to Section XI of the ASME Code.

( Repair or Rep cement )

6'9 4 / PNS SECTION SUPERVISOR 9 AUG 1984 (Owner or gp66r's Designee) (Title) (Date)

CERTIFICATE OF INSPECTION I, the Undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State'or Province of OHIO employed by ** of NORWOOD, MASS have inspected the REPLACEMENT described in this report on 9 AUGUST 1984 and state that to the best of my knowledge and belief, this repair or replacement has been constructed in accordance with Section XI of the ASME Code. By signing this certificate, neither the Inspector nor his employer takes any warranty. expressed or implied, concerning the repair or replacement described in this report. Furthermore

, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

Date 8-T- 8Y d6 Commissions FACTORY MUT Y TEMS L (Inspectof)

(State or Province, National Board) ou ARKWRIGHT BOSTON MFG'S MUTUAL INS. CO.

2

NIS-2 SUPPLEMENTAL SHEET PAGE 24 OF 27

1. OWNER: FLORIDA POWER & LIGHT DATE: 9 AUGUST 1984 P.O. BOX 529100 $

MIAMI,' FLORIDA 33152 e

2. PLANT: ST. LUCIE UNIT: 1 P.O. BOX 128 FT. PIERCE, FLORIDA 33454
3. WORK SEE BELOW DESCRIPTION JOB NO. PC/M 254-183 PERFORMED BY:
4. IDENTIFICATION STEAM GENERATOR FEEDWATER NOZZLE SAFE END AND OF SYSTEM: ELBOWS REPLACEMENT
7. DESCRIPTION COMBUSTION ENGINEERING PERFORMED THE DESIGN AND OF WORK: FABRICATION OF THE SAFE END SPOOL PIECE. ( ASME SA-106, GRADE C ) I.D. 15.812", O.D. 18.12"

^

COMBUSTION ENGINEERING PERFORMED THE ENGINEERING SUPPORT OF THIS REPLACEMENT.

COMBUSTION ENGINEERING PERFORMED THE FINAL STRESS ANALYSIS.

r' HUB, INC. PROVIDED THE (2) EACH 18" SCHEDULE 80, 90 DEGREE LONG RADIUS ELBOWS. ( ASTM A-234, GRADE WPB )

BECHTEL ENGINEERING PERFORMED THE WELDING ON THE REPLACEMENT COMPONENTS.

FPL PERFORMED THE HYDROSTATIC PRESSURE TESTS.

FPL CODES & INSPECTIONS PERFORMED THE BASELINE EXAMINATIONS PRIOR TO STARTING UP THE PLANT.

l

.y 3

g. - -

g --

+

/

I CORE BARREL EXAMINATION SUletARY _ REPORT - PAGE 25 OF 27 FLORIDA PONER & LIGHT' DATE: 9 AUGUST 1984

~

1. OWNER:

P.O. BOX 529100 ,

  1. N MIAMI,: FLORIDA 33152

{v

. 2.-PLANT: Sf. LUCIE- ~ UNIT: 1 i

, ,. P.O. BOX _128 Fr. PIERCE,. FLORIDA 33454 .

3. NORK COMBUSTION Ei;GINEERING,INC JOB NO. PC/M 037-184 PERFORMED 1000 PROSPECT HILL ROAD BY:' EAST WINDSOR,' CONNECTICUT *

-4. IDENTIFICATION R6 ACTOR PRESSURE VESSEL, CORE BARREL OF SYSfEM:

7. DESCRIPTION. PRdCISION CUTTING, IdC. PERFORMED.THE MACHINING OF-OF. WORK: TdE EXTERIOR SURFACE OF TiiE CORE BARREL COM80STION ENGINEERId3 PERFORMED TdE ESGINEERING 90PPORT'OF THIS ACTIVIf f AMD PERFORMED THE EXAMINATIONS

')F THE CORE BARREL. REPORT NO IR-ISI-029 DETAILS THOSE EXAdlaATIOt;S TdAT .idRE PERFORMED. TEE REPORT IS DIVIDED INf0 3 SECTIONS.

SBCTION INTt;RVaL 'OF EAAMINATINS SECTION f1TLE I JJLi 1933 TO OCTOBER 1963 PRE REPAIR BXAMINATIONS II S6P &tBER 1983 TO D6CEMBE.R 1963 INPROCESS EXAMINATIONS III FC80RARY 19d4 FINAL EAAMINATIONS COs180STIOd EnGINEERioG RCMOVED THE THERMAL SHIELO StsCTION I - DSTAlLS Trad EXAMINATIOWS OF fiiE PSL-1 COR6 B ARREL. EACtl LJG ARin wAS EXAMINED VISUALLi, AND MAPPED AITH EDDY CURRENT TECliNIQUES FOR LOCATING SURFACE FLA4S. THEN rdESS AREAS oEHd ULTRASONICALLY EXAMIdED TO DETBRMINE Th8 DEPIti OF Tif8SE INDICATIONS.

TriE VISUAL EXAMINATION COVERED ftiE ENTIRE CORB SUPPORT BARBEL CHAT DAD BBEN COVrRtiD Bf thE TriERMAL SHIBLD, INCLUDING Ad ARBA 5" BELOW THE THERMAL Sti1 ELD.

SECTION II --INPROCESS dXAMINATIONS REFER's f0 THOSE NONDESTRUCTIVE EXAMINATIGAS P6RFORMED AS PARI' OF Tdd MACttINING OPERATION.

3ECTION III - IHE FIGAL VISdAL EXAMINATION WAS PSRFOMsED AFTER THE COMPLETION OF TsE'RCPaIR. THE VlSU AL dXAMIN ATIOdS COVERED Trib :-14 CHINE LUG AREAS , AhD TdE Mt,CHAAIC ALLY ATTACllED - PLUGS AND PATCHES AND An AddA Si:,NEtir. Ac.D IMMEDIAfELY ADJACENT TO 1

w- , .w Q

)

-; l PAGE 26 OF 27 THE PLUGS AND PATCHES.'

THE RESULTS WERE. DOCUMENTED ON VIDEO TAPES AND PHOTOGRAPHS.

e THE RESULTS ARE AS' FOLLOWS:

1) NO NEW CRACKS T)R CRACK LIKE INDICATIONS WERE DISCOVERED AS A RESULT OF THE , INSTALLATION OF THE PLUGS AND PATCHES.

~

2) KNOWN CRACKSf0R CRACK 1LIKE. INDICATIONS'WITHIN_THE REPAIRED AREA WERE EXAMINED AND DOCUMENTED.
3) NICKS, SCRATCHES 'AND SHINY AREAS AROUND THE REPAIRED AREA ,

AERE NOTED FOR FUTURE REFERENCE.

CERTIFICATE OF COMPLIANCE To cert ify that the statements' made in this report are correct and the exa ainatio perfor _d were in accordance with Section XI of the ASME Code.

Signed //tr# M PNS SECTION SUPERVISOR 9 AUG 1984 (Owner orsdtne~r's Designea) (Title) (Date)

l 2

B _.

FORM NIS-BB OWNERS' DATA REPORT FOR EDD f CURRENT SXAMINATION RESULTS As required by the provisions of the ASMS CODE RULES PAGE 27 OF 27 EDDY CURRENT EXAMINATION RESULTS

=============================================================

PLANT: ST. LUCIE UNIT NO. 1 EXAMINATION DATES: FROM 8 MARCH 1984 THRU 5 APRIL 1984 ST5AM TOTAL TOTAL TOTAL TOTAL TUBES TUBES TOTAL GEN. TUBES INDICATION INDICATION PLUGGED AS PLUGGED TUBES NO. INSPE- > OR = TO > OR = TO PREVENTIVE IN PLUGGED CTED 20% TO 39% 40% TO 1004 MAINTAINANCE ERROR

~

l l I SG 1A 100% 81 45 136 1 263 SG la 100% - f64 14 122 3 243 LOCATION OF INDICATIONS STEAM APEX OF EGGCRATES TOP OF TUBE SHEET DRILLED SUPPORT GEN. U-BENDS 1 THRU 5 TO 1 ST. EGGCRATE PLATE SG 1A 64 20 17 ,

25

__ l SG 13 91 11 4 i 12 l

CERTIFICATION OF RECORD We certify that the statements in this record are correct and the tubes inspected were tested in accordance with the requirements of Section XI Cf the ASME Code.

s FLORID 4/ DOWER & LIGHT COMPANY

( Organization )

DATE 9 AUGUST 1984 BY l&/f, /'

/

1 I

t u q l

i H

\

FORM NIS-1-OWNERS' DATA REPORT EVR INSERVICE INSPECTIONS As required 2 by the Provisions ~ of the ASME Code Rules page 1 of 2

=u======================================================================a

Florida . Power and Light Co. 9250 W. Flagler, Miami, Fla.

'l. Owner (Name and address-of Owner)

St. Lucie ~ Nuclear Power' Plant ( formerly Hutchinson Island),

P.O. . Box 128, Ft. Pierce, F1 33454 I

2. Plant (Name and address of Plant)  ;

t

3. Plant Unit 1 4.. Owner Certificate of Authorization (if required) N/A
5. Commercial service date 21 DECEMBER 1976
6. National Board Number ~for Unit N/A
7. Components Inspected Component or Manufacturer Manufacturer State or hational Appurtenance or Installer or Installe Province Board Serial No. Number Number RPV VESSdb COMBU6 TION ENG . N/A N/A N/A PRESSURIZER COMBUSTION ENG N/A N/A N/A STM. GEN. COMBdSTION ENG N/A N/A N/A aEACrOR COOLAuf EbaSCO N/A r/A N/A SnFETY INJ bCTION EBASCO N/A N/A N/A biti1N ST BArt BBASCO N/A N/A N/A Fn6DnATER EBASCO ~~ N/A N/A N/A 1 i

=----r Note: Supplemental sheets in form of lists, sketches, or drawings may be used provided (1) size la 8 1/2 in. x 11 in., (2) information in items 1 throuch 6 on this data raport is included on each sheet, and (3) each'shedt la numbered and the number of sheets is recorded at the top of this form.

1

r . a 3; page 2 of 2 FORM NIS-1 (back)

8. Examination Dates 3-2-83 to 5-16-84 9, . Inspection Interval from 6-2/3 YEARS to 10 YEARS
10. Abstract of Examination. Include a list of examinations and a statement concerning status of work required for current interval.

This report satisfies the first outage of the last period of commercial operation. (see SWRI FINAL REPORT 5179)

11. Abstract of Conditions Noted.

See SWRI Report 5179 " 1984 Inservice Inspection Report Vol 1 - 6 "

12. Abstract of Corrective Measures Recommended and Taken.

ALL AREAS asQUIRING CORRECTIVE ACTIONS WERE DISPOSITIONED de certify that the statements made in this report a correc nd the examinations and corrective measures taken conform to ne rulee of the ASt4E Code,Section XI. s Date 9 AUGUST 1984 Signed FLORIDA POWER & LIGHT CO By 2dM7 6 Owner //

Certificate of Authorization no.(if applicable) N/A Expiration date N/A CERTIFICATE OF INSERVICE INSPECTION I, the underaigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and/or the State or Province of OnIO and einployed by

  • of AORdOOD, MASS have inspected the components described in this Owners' Data Report during the period 3-2-83 to 5-16-84 , and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owners' Data Report in accordance with the requirements of the ASME Code,Section XI.

By signing thia certificate neither the Inspector nor his employer makes any warranty, expresned or implied, concerning the examinations and corrective measures described in this Owners' Data Renort. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with thia inspection.

Da e 8'I 19 8V FACTORY MUTUAL SYST8M 5 4{. j h TZ [f2 Commissions NB-7719

_ Inspector's Signature National Board, state, Province and No. i

  • ARK 6RIGdT BOSTOce mfg'S MUTUAL INSURANCE COMPANY 2
Retrieved from "https://kanterella.com/w/index.php?title=ML20094P470&oldid=2786023"