ML20094K081
| ML20094K081 | |
| Person / Time | |
|---|---|
| Site: | Perry  |
| Issue date: | 03/11/1992 |
| From: | Hall J Office of Nuclear Reactor Regulation |
| To: | |
| Shared Package | |
| ML20090K109 | List: |
| References | |
| NUDOCS 9203180268 | |
| Download: ML20094K081 (5) | |
Text
. - - _ _ - _ _ - _ _ _
l f *%q r
s
[.
UNITED STATES e
'A, i
NUCLEAR REGULATORY COMMISSION
%(%....'/f WASHINGTON. D C 705%
./
THE CLEVELAND ELECTRIC ILLUMINATING COMPAN_L ET AL.
DOCKET N0 J 0-440 PERRY NUCLEAR POWER PLANT. UNIT NO. 1 AMENDMENT TO FAClllTY OPERATING LICENSJ
\\
Amendment No. 40 License No. NPF-58 1.
The Nuclear Regulatory Commission (the Commission) has found that:
A.
The application for emendment by The Cleveland Electric L
Illuminating Company, Centerior Service Company, Duquesne Light Company, Ohio Edison Company, Pennsylvania Power Company, and Toledo Edison Company (the licensees) dated December 18, 1991, complies with the standards and requirements of the Atomic Energy Act of 1954, as amended (the Act), and the Commission's rules and regulations set forth in 10 CFR Chapter I;
=
B.
The facility will operate in conformity with the application, the provisions of the Act, and the rules and regulations of the Commission; C.
There is reasonable assurance (i) that the activities authorized by this amendment can be conducted without endangering the health and safety of the public, and (ii) that such activities will be conducted in compliance with the Commission's regulations; D.
The issuance of this amendment will not be inimical to the common defense and security or to the health and safety of the public; and E.
The issuance of this amendment is in accordance with 10 CFR Part 51 of the Commission's regulations and all applicable requirements have been satisfied.
2.
Accordingly, the license is amended by changes to the Technical Specifi-cations as indicated in the attachment to this license amendment, and paragraph 2.C.(2) of Facility Operating License No. NPF-58 is hereby amended to read as follows:
I 9203180268 920311 PDR ADOC,K 0500 0
P
_____-________________-__-___-___--J
N-
. (2)
' Technical Soecifications The Technical Specifications contained in Appendix A and the Environmental Protection Plan contained in Appendix B, as revised through Amendment No. 40 are hereby incorporated into this license.
The Cleveland Electric Illuminating Company shall operate the facility in accordance with the Technical Specifi-cations and the Environmental Protection Flan.
3.
- This license amendment-is effective as of its date of issuance.
FOR THE NUCLEAR REGULATORY COMMISSION
. fu, g Ja es_R. Itall, Sr._ Project Manager Project Directorate 111-3 Division of Reactor Projects III/IV/V Office of Nuclear Reactor Regulation
Attachment:
Changes to the Technical Specifications
-Date of issuance: March 11, 1992
,m--
r
ATTACHHENT TO LICENSE AMENDMENT NO. 40-
[ACILITY OPERAllNG LICENSE NO. HPF-58 DOCKET NO. 50-440
- Replace the following page of the Appendfx "A" Technical Specifications with the attached page.
The revised page is identified by Amendment number and
- contains vertical lines indicating the area of change.
The overleaf page is provided to maintain' document completeness.
Resalt Insert 5-4 5-4 9
7 h
I
_..z,.
---t
o is t
I n
g c....
Q LAKE ERIE t..
a..,
PERRY NUCLEAR h
M I**
=
POWER PLAN
-i E
- u/g EMS I
_i i
-(
ig i i
=
p,,,,,
4 1....
+k sa @%
e r
E
,l
~ _
.... /
a
~
=
Madison u, 5 kg h'
,1 L
T
{
2 Villag e 3lr s
.;g-I.g
]y
"%g-l
!s 2 ;
e
'p m
s V
y 6
l I
j _,. 23 c#
/s i
d 3
)
i f..
i j
x
/
I 1
0 1
2 3
4 MILES
'k e
c i
JOESIGN FEATURES 1
DESIGN' TEMPERATURE AND PRESSURE _ (Continued) b.
Maximum internal temperature:
-1.
'Drywell 330*F.
2.
- Suppression o001 185 F.
c.
Maximum external to internal differential _ pressure:
- 1.
Drywell 21 psid.
.2,=
Containment 0.0 psid.
'S_ECONDARY CONTAINMENT 5.2.3 The secondary containment consists of the annulus between the shield building and the primary, containment and has a minimum free volume of 39?,548 cubic feet.
5.3-REACTOR ~ CORE FUEL' ASSEMBLIES 5.-3.1. The reactor-shall contain 748 fuel assemblies.
Each assembly sha.l-consist of-a matrix of Zircaloy~ clad fuel rods with an initial com' position of slightly enrichedLuranium dioxide-(U04) as fuel material.
Fuel assemblies shall be limited to those fuel designs a$ proved-by-the NRC Staff for use in BWR' s.
CONTROL R00 ASSEMBLIES 5.3.2--The reactorLcore shall contain-177 control rod assemblies.
Each assembly _shall consist of-a cruciform array of. neutron absorbing material.
The controi material:shall be boron carbide. powder 1(B C)-and/or hafnium 4
metal and; ha've' a nominal absorber length of 143.7 inches.
5.4:-REACTOR-C00L' ANT SYSTEM-DESIGN PRESSURE AND-TEMPERATURE V
5.4.1 The' reactor coolant system is designed an'd shall be maintained:
a.
.In accordance with.the code requirements specified in Section 5;2 of the. FSAR, with allowar.ce for ncrmal degradation pursuant to the applicable. Surveillance Requirements, 4-b.-
For a pressure.of:
.l..
1250 psig on the suction side of the recirculatioc nump.
^
PERRY - UNIT i 5-4 Amendment No. 33,40
-