ML20080C774
| ML20080C774 | |
| Person / Time | |
|---|---|
| Site: | Wolf Creek  |
| Issue date: | 12/12/1994 |
| From: | WOLF CREEK NUCLEAR OPERATING CORP. |
| To: | |
| Shared Package | |
| ML20080C772 | List: |
| References | |
| NUDOCS 9412200141 | |
| Download: ML20080C774 (2) | |
Text
..
.i.
y n: 9:_
'. x3 %
.AttachmehtlIV to CO 94-0032 s
.Page 1 of 2 s
j i:
ATTACHMENT IV PROPOSED TECHNICAL SPECIFICATION CHANGES i
9412200141 941212 PDR ADOCK 05000402 P
PDR J
y p
i e,
~
l?
, - Q' _
\\
[..-r' j
l Attachmeht IV to COl94-0032
,f
- LPage 2 of 2 j
' I, I
.El,6MT SYSTEMS
' SURVEILLANCE REQUIREMENTS (Continued)
- b. At least once per 31 days by:
, xce ithe a xilia feedwater pump discharge control valves,
- 1) Verifying that each non owtomake valve, in flow path a is not locked, sealed, or otherwise secured in position is in I.
Its correct position; and 1
l ump discharge control valve j
- 2) Verifying that each 21.:
. : ;;.;; in'the flow path isTn the j
fully ope ition whenever the auxiliary Feedwater System is j
placed in
- t:nf: x....:: or when above 10% RATED THERMAL 1
POWER.
- c. At least once per 18 months during shutdown by:
- 1) Verifying that each automatic valve in the ESW supply to the auxiliary feedwater pumps actuates to its full open position upon receipt of an Auxiliary Feedwater Pump Suction Pressure-Low test signal
- 2) Verifying that each auxiliary feedwater pump starts as designed
{
automatically upon receipt of an Auxiliary Feedwater Actuation i
test signal, and -
- 3) Verifying that each auxiliary feedwater motor-operated discharge valve limits the flow to each steam generator from the motor-ririven pump to less than or equal to 320 gpm.
4 71.2.2 An auxiliary feedwater flow path shall be demonstrated OPERABLE following each COLD SHUTDOWN of greater than 30 days prior to entering MODE 2 by verifying normal flow to at least two steam generators from one auxiliary foodwater pump.
1
' WOLF CREEK - UNIT 1 3/4 7-5
)l I
la