ML20078A361

From kanterella
Jump to navigation Jump to search
Change 5 to Rev 0,to Program Plan for Second Insp Interval for Plant,Units 1 & 2
ML20078A361
Person / Time
Site: Calvert Cliffs  Constellation icon.png
Issue date: 01/18/1995
From:
BALTIMORE GAS & ELECTRIC CO.
To:
NRC OFFICE OF INFORMATION RESOURCES MANAGEMENT (IRM)
References
PROC-950118, NUDOCS 9501240373
Download: ML20078A361 (7)
v • d • e


Text

._ _ _ _ _ _ _ _ _ _ _

, ?

R rt;T E.DENTON Baltimore Gas and Electric Company Calvert Cliffs Nuclear Power Plant Vice President 1650 Calvert Cliffs Parkway Nuclear Energy Lusby, Maryland 20657 410 586-2200 Ext.4455 local 410 260-4455 Baltimore l

January 18,1995 U. S. Nuclear Regulatory Commission Washington, DC 20555 ATTENTION: Document Control Desk

SUBJECT:

Calvert Cliffs Nuclear Power Plant Unit Nos.1 & 2; Docket Nos. 50-317 & 50-318 Changes to Inservice Inspection Program Plan for Calvert Cliffs Units I and 2

REFERENCES:

(a) Letter from hir. G. C. Creel (BGE) to Mr. R. A. Capra (NRC), dated January 11,1990, Approval of Second Ten-Year Inservice Inspection Program Plan for Calvert Cliffs Units 1 and 2 (b) Letter from Mr. G. C. Creel (BGE) to Document Control Desk (NRC),

dated May 10,1990, Second Ten-Year Inservice Inspection Program Plan for Calvert Cliffs Units 1 and 2 Reference (a) reported approval of our second ten-year Inservice Inspection (ISI) Program Plan.

Reference (b) provided Changes I through 3 to the ISI Program Plan. Attached please find Change 5 to the Inservice inspection (ISI) Program Plan for the Second Inspection Interval as required by ASME Code Section XI. This change adds additional code cases for possible future use at Calvert Cliffs. The additions are necessary because of recent activity by the ASME XI Code Committee which indicates that they are going to annul older code cases that have already been incorporated into later additions of ASME Code l Section XI. Once annulled, these older code cases can only be utilized at Calvert Cliffs if they are identified in the ISI Program Plan. We do not plan to change our ISI code commitment until the ten-year ISI Plan is updated at the end of the second inspection interval.

Also attached for your information is Change 4, which corrects a typographical error on Page 13, Table 1.

The reference figure for examination category should be IWB-2500-14, rather than IWB-2500-13.

Figure IWB-2500-14 better represents the as-built conditions at Calvert Cliffs.

n e o r, r o 4u0UcU i

9501240373 950110 PDR I P

ADOCK 05000317 PDR

I Document Control Desk I

January 18,1995 Page 2  ;

Should you have any questions regarding this matter, we will be pleased to discuss them with you.

l Very truly yours, N -.,

RED /MDhi/bjd i Attacitments cc: D. A.13 rune, Esquire J. E. Silberg, Esquire L. B. Marsh, NRC D. G. Mcdonald, Jr., NRC T. T. Martin, NRC P. R. Wilson, NRC R. I. McLean, DNR J. II. Walt- , PSC l

l l

l

Chance 5 G. RELIEF REQUESTS AND CODE CASES 6.1 Relief Requests In accordance with 10CFR50.55a(g)(5)(iv), BG&E has requested relief from those ASME Section XI requirements that have been determined impractical for certain areas. This section summarizes each Relief Request ruir.nitted to the NRC for consideration. Each request provides information on the component for which relief is requested, ASME requirements, proposed alternate method, and other pertinent information, as needed. Additional Relief Requests will be submitted to the NRC as appropriate.

Table 5 presents a summary of the enclosed Relief Requests.

6.2 ASME Code Cases In accordance with 10CFR50.55a, footnote 6, ASME Section XI Code Cases referenced in Regulatory Guide 1.147, " Inservice Inspection Code Case Acceptability.ASME Section XI, Division 1," may be incorporated into the Calvert Cliffs ISI Program. Those Code Cases included in Regulatory Guide 1.147 that will be implemented at Calvert Cliffs are identified in this section. Each Code Case is preceded by information on the applicable component / area, ASME requirements, and how the Code Case will be implemented. Additional Code Cases will be included as appropriate.

Table 6 presents a summary of Regulatory Guide 1.147 Code Cases that will be used.

Table 7 presents a summary of additional Regulatory Guide 1.147 Code Cases that may be used.

O V

O 39

BALTIMORE GAS & ELECTRIC COMPANY PROGRAM Pi.AN FOR THE SECOND INSPECTION Chance 5 INTERVAL FOR CALVERT CLIFFS Pagei DO "uc'E4a aowEa a'aur. unirS , a 2 Rev'eiem o SwRI PROJECT 17-3724 EFFECTIVITY AND APPROVAL REVISION O OF THIS PROGRAM PLAN BECAME EFFECTIVE ON November 10. 1987 .

THIS PROGRAM PLAN CONSISTS OF THE PAGES AND CHANGES LISTED BELOW.

UST OF EFFECDVE PAGES AND CHANGES PAGE No. CHANGE No. REVISION DATE EFFECTIVE Title Page 0 November 1987 i 5 0 October 1994 il through lii 0 November 1987 1 0 November 1987 2 3 0 March 1990 3 through 8 0 November 1987 9 2 0 September 1989 10 through 12 0 November 1987 13 4 0 November 1992 14 through 21 0 November 1987 22 3 0 March 1990 23 through 26 0 November 1987 27 3 0 March 1990 28 through 30 0 November 1987 31 3 0 March 1990 32 through 38 0 November 1987 39 5 0 October 1994 40 through 53 0 November 1987 54 1 0 September 1988 55 through 65 0 November 1987 66 1 0 September 1988 67 through 68 5 0 October 1994 l

l i

APPROVALS

, WRITTEN BY BG&E ISI ENGINEER CCNPP PLANT GENERAL MANAGER M

l

Change 5 Table 7 m

! i

( ) ADDITIONAL REGULATORY GUIDE 1.147 CODE CASES THAT MAY BE USED Code Section XI Case Enference Descrintion N 98 IWA 2232 Calibration Block Tolerances,Section XI N-211 Appendix III 3330 Recalibration of Ultrasonic Equipment Upen Change of Personnel,Section XI, Division 1 N 235 Section V, T-432.1.2 Ultrasonic Calibration Checks per Section V,Section XI, Division 1 N-2361 IWE 4000 & IWE.7000 Repair and Replacement of Class MC Vessels,Section XI, Division 1 N-311 IWC 25001 Alternative Examination of Outlet Nozzle on Secondary Side of Steam Generators,Section XI, Division 1 N 355 Appendix III 3410 Calibration Block for Angle Beam Examination of Large Fittings in Accordance with Appendix III-3410,Section XI, Division 1 N 356 IWA 2300(a)(1) Certification Period for Level III NDE Personnel,Section XI, Division 1,2, and 3 N-389* IWA 4000 &IWA-7000 Alternative Rules for Repairs, Replacements, or Modifications,Section XI,

,. s Division 1

/ T O N 4011 Appendix IV 3000 Eddy Current Examination,Section XI, Division 1 N 402-1 IWA 2233 Eddy Current Calibration Standards,Section XI, Division 1 N 409 2 Section XI,1974 Edition Procedure and Personnel Qualification Requirements for Ultrasonic Detection Through 1986 Addendum and Sizing of Flaws in Piping Welds,Section XI, Division 1 N 419 IWB-2500-1 Extent of VT 1 Examinations, Category B-G 1 of Table IWB-25001,Section XI, Division I N-427* IWA 1400 Code Cases In Inspection Plans,Section XI, Division 1 N 4291 IWA 2232(a)(1) Alternative Rules for Ultrasonic Instrument Calibration,Section XI, Division I N 432 IWB 4300 Repair Welding Using Automatic or Machino Gas Tungsten Arc Welding (GTAW)

Temperbead Technique,Section XI, Division 1 N 435-1 IWB-2500-1 & IWC- Alternative Examination Requirements for Vessels with Wall Thickness 2 in. or 2500-1 less,Section XI, Division 1 N-437 IWA-5260 Use of Digital Readout and Digital Measurement Devices for Performing Pressure Test,Section XI, Division 1 N 448 IWA 2300(c) Qualification of VT 2 and VT-3 Examination Personnel,Section XI, Division I

! \

U 67

Change 5  ;

.C' Table 7  :

ADDITIONAL REGULATORY GUIDE L147 CODE CASES

[7 TIIAT MAY BE USED (CONT'D)

O Code Section XI .

CA&g Reference Descrintion N 449 IWA 2300(c) Qualification of VT 4 Visual Examination Personnel,Section XI, Division 1 N 457 Appendix VI 2430 Qualification Specimen Notch location for Ultrasonic Examinstion of Bolts and Studs,Section XI, Division 1 N 458 IWA 2221 Magnetic Particle Examination of Coated Materials,Section XI, Division 1 N 460 IWB 2500 & IWC-2500 Alternative Examination Coverage for Class 1 and Class 2 Welds, Section .

XI, Division 1 N 461* Appendix III 3410 Alternative Rules for Piping Calibration Block Thickness,Section XI, Division 1 N 4631 IWB-3514.2 Evaluation Procedures and Acceptance Criteria for Flaws i:: Cb. I Ferritic Piping that Exceed the Acceptance Standards of IWB 3514.2,Section XI, '

Division 1 ,

N 471 IWB-2420 & IWC-2420 Acoustic Emission for Successive Inspections,Section XI, Division 1 N 481 IWB-2500-1 Alternate Examination Requirements for Cast Austenitic Pump Casings,Section XI, Division 1 N 485-1 IWA-2220 Eddy Current Examination of Coated Ferritic Surfaces as an Alternative to '

Surface Examination,Section XI, Division 1 N-489 IWA 2300 Alternative Rules for Level III NDE Qualification Examinations,Section XI, Divisions 1,2, and 3 N 4901 IWA 2300(c) Alternative Vision Test Requirements for Nondestructive Examiners,Section XI, Divisions,1,2, and 3 N 491 IWF Alternative Rules for Examination of Class 1,2,3, and MC Component Supports of Light-Water Cooled Power Plants,Section XI, Division 1 x i

N 494 IWB-3514.2 Pipe Specific Evaluation Procedures and Acceptance Criteria for Flaws in Class 1 Ferritic Piping that Exceeds the Acceptance Standards ofIWB.

3514.2,Section XI, Division 1  !

l N 495 IWC-5222 & IWD 5223 Hydrostatic Testing of Relief Valves,Section XI, Division 1 N 496 IWA 7000, IWB 7000, IWC. Helical Coil Threaded Inserts,Section XI, Division 1 7000 & IWD 7000 N 498 IWB 2500-1 & IWC-25001 Alternative Rules for 10-Year IIydrostatic Pressure Testing for Class 1 and 2 Systems,Section XI, Division 1

. A

'6 Tatde 1 INSERVICE DGPECTION PROGRAM CIASS 1 COMPONENI3 (Cont'd)

I

Isen Beaunscion Components and Paris To Be Emm== ann F===== nam Repwemeses for Fm====mna Technuque/P====== mag No. Categpry Omnuned Method Second Inspvtion Interval Ases Cos==emen SITAM GENEIMTORS l

B230 B-B Grcundemuni and Voheneme One cucumfemeal and one mershonal weld F====mn=s wW be pedorned wish tR wiR be e====ed *llte enanunstsons wiE be

  • Mermisonal Wekts in the L-B231

! B232 tower Head limited to one of the tuo secam pnerators per unit.

B140 B-B Tubeshees-ac41 cad Weld Volumetne *Ilic tidaheet-ec> head weld wis be enar==ed Emanummenon wiB be pedonned wiek (Jr De- = wiu be limited to one of the

two steam peeraeors per unit.

B1130 B-D Nomdeto-Vesmet Welds and Voluneetnc AE acerie ecMhet melds and =rner inside radies Fm=m=m==nn=a wiE be pedormied with IJr B1140 Noede Inside Radius Sections sections wig be esamened. At least 25% but not - --e -

enore than 50% of the moedes shmE be

  • by the end of the fint immpection period and the

, w sentaander by the end of the inspection inserval ta No di===a=, meeeel monde weeds on seensa '

Bilo B-F Noezhsc> Safe End Dismanilar N/A IEJ10 Metal Welds Fne-na= at Cheuert OilEL B190  :

B&90 BG1 E .?- . Botung N/A No behing on steen yrme-ana >2 inches in i B&100 >2 Inches in Diameter di====*e at Omhert Oiss.

B&110 l B7JO BG2 Bohs, Studs, and Nues Vuust (VT-1) AE boks, studu, and muss wis be esamened- F==== aman == smay be pedan=ed in pimee under 5,2 I= rte = in Demeter teamion or when semoued

, B830 BH InsegraEy Welded Vaa==* erie De vessel support sidre wM bc ====n==d De F======aia== wM be pesformoed per Rpse -

] Are=riuneses *===== man wiB be E=inat to cae sneem IWB-250014.

]

ynemoor.

B1530 B-P 7 . Visumi (VT-2) AM seessi poemaa- ca-pa===a= to be exammmed VT *======== wM be pedaemed in Boundanes during syneem leakay test. Fu=====na== to be amonismee wish IWA-SMG.

pedonned in acconimace with IWB-5221 prior to Pi mmt snartup aber each sefuehag casey.

2 B1531 B-P T_ .- P ' . Vuual (VT-2) AE seems paes= nae ma pa=.=an to be h VT h um be pedar==d in 3 var ==d=,ses dusing synessa hydsassane test. F=====hnma to acconimaec wish IWA,5 MIL be pedormed in accosdames with IWB,5222 at or f

i acer the end of the inspection sneerut '

g Bl&20 BQ Volumeene De tidning in the hot leg side, IMead porton, Seese Genersoor Denng F===i==ma= sequmemann, ===n== mag smethod, and *Teia==ay cold leg side wiE be e=====ed and the essent and fsequency of - -

shmE be in

  • with plant Teciument i

- + - rw,- ,- ,,~<--,,,,an~- , , , . , , ~ - .w. -~.L,,,,- - - - - - - - -w- , ~ , - . . , . - - - - - - , - - - - - - - . - - . - - - - - - - -

Retrieved from "https://kanterella.com/w/index.php?title=ML20078A361&oldid=2815770"