ML20064D202
| ML20064D202 | |
| Person / Time | |
|---|---|
| Site: | McGuire, Mcguire  |
| Issue date: | 10/16/1978 |
| From: | Parker W DUKE POWER CO. |
| To: | James O'Reilly NRC OFFICE OF INSPECTION & ENFORCEMENT (IE REGION II) |
| References | |
| NUDOCS 7810310336 | |
| Download: ML20064D202 (2) | |
Text
>
DUKE POWER COMPANY Powen St stniwo 42 Soi Tn Cut wen Srazer. Caunt. orts. N C 2sa-u October 16, 1978
-w - o a c a. s=
- -r a.c : ~,
s a.e:.: e-Mr. J. P. O'Reilly, Director U. S. Nuclear Regulatory Commission
~
Region II 101 Marietta Street, Suite 3100 Atlanta, Georgia 30303 RE: RII:RMC 50-369/78-27 50-370/78-13
Dear Mr. O'Reilly:
Please find attached our response to Item 370/78-13-02 which was identified in IE Inspection Report No. 50-369/78-27, 50-370/78-13.
Duke Power Company does not consider any information in the inspection report to be proprietary.
V ry truly yours, s
c J.
- 'illiam O. Parker, J.
n GJP:scs Attachment
.. ~
h;.u 781.03103 %
IE INSPECTION REPORT: 50-369/78-27 50-370/78-13 APPENDIX A NOTICE OF VIOLATION Duke Power Company License No. CPPR-84 Based on the results of the NRC inspection conducted on August 15-17, 1978, it appears that certain of your activities were not conducted in full compliance with NRC requirements as indicated below. These items have been categorized as described in our correspondence to you dated December 31, 1974, i
Criterion V of Appendix B to 10 CTR 50, as implemented by DPC FSAR Section 17, Paragraph 17.1.5 specifies in part that activities af f ecting quality shall be accomplis hed in accordance with the re-quirements i= posed by... instructions, procedures and drawings.
Construction Procedure No. 54, Fire Protection During Cutting and Welding Operations, of the DPC Cor.struction Quality Assurance Pro-gram specifies that " Fire watchers shall have fire extinguishers readily available and be trained in its use."
Contrary to the above requirements, on August 16, 1978, the inspec-the fire vaccher for welding being performed in tor observed that 2 Reactor Building did not have a fire extinguisher immediately Unit fire extinguisher was located in a congested The nearest available.
area approximately 75' from the area in which the welding was being performed.
This in an infraction.
i
RESPONSE
All welding craf t supervisors have been instructed by the General Superintendent to have a fire extinguisher readily available and to have a fire vaccher on hand j
during velding and cutting operations in accordance with Construction Procedure number 521.
j l
I I
t i
w