ML20063K015
| ML20063K015 | |
| Person / Time | |
|---|---|
| Site: | Comanche Peak  |
| Issue date: | 02/01/1994 |
| From: | Debonis J TEXAS UTILITIES ELECTRIC CO. (TU ELECTRIC) |
| To: | |
| Shared Package | |
| ML20063K010 | List: |
| References | |
| NUDOCS 9402280044 | |
| Download: ML20063K015 (179) | |
Text
e I
./
'w)
INSERVICE INSPECTION
SUMMARY
REPORT FIRST INTERVAL, FIRST PERIOD, THIRD OUTAGE TU Electric P.O. Box 1002 Glen Rose, Texas 76043 Comancho Peak Steam Electric Station Glen Rose, Texas 76043 Unit 1 Commercial Operating Date August 13,1990 f
J Pe80>'s WW aliIfy Prepared by:
Reviewed by:
2147cv 2 //d8fe 2///f4
( j' t
~v O
P"menan.
PDR j
J
.f' Table of Contents 1.0 Introduction 1.1 Purpose 1.2 Scope 1.3 Outage, Period and Interval Start and End Dates 1.4 Authorized Nuclear Inservice Inspector 2.0 Summary of Examinations and Tests 2.1 Piping and Components i
t 2.2 Pressure Tests 2.3 Eddy Current Appendir A NIS-1 Owner's Report for Inservice Inspections Appendir B Sismmary of Examinations Append 1: C Relief Requests Appendir D NIS-2 Owner's Report for Repairs or Replacements F
f i
I O
_ _.. ~
I INSERVICE INSPECTION
SUMMARY
REPORT FIRST INTERVAL, FIRST PERIOD, THIRD OUTAGE
1.0 INTRODUCTION
1.1 PURPOSE The purpose of this summary report is to provide information relating to the inservice inspection (ISI) activities performed during the third refueling outage at the Comanche Peak Steam Electric Station (CPSES) Unit 1. This report documents compliance with 10CFR50.55(a) Technical Specifications 4.0.5 and 4.0.6, and ASME Section XI,1986 Edition, no Addenda (the Code),
for all examinations and tests. This report also documents compliance with the Texas Department of Licensing and Regulation. Boiler Division. Boiler Law & Rules and Regulations.
1.2 SCOPE This summary report addresses those examinations and tests of Code Class 1,2 and 3 systems as stipulated in the CPSES Unit 1 ISI Program Plan, Rev.1 (the Plan). The Form NIS-1 is included in Appendix A. Form NIS-2 numbers documenting Section XI O
repairs / replacements that have occurred since the previous Form NIS-1 (issued in conjunction with the second refueling outage) are identified in Appendix D. The period of time covered is from December 1992 through December 1993.
1.3 OUTAGE, PERIOD AND INTERVAL START AND END DATES This refueling outage was the third outage in the 1st Inspection Period of the 1st Inservice Inspection Interval. The ISI examinations for this outage were performed between October 1, 1993 and December 31,1993. The Inspectjon Period began on August 13,1990 and hac ended coincident with the completjon of this third refueling outage. The Inservice Inspection Interval began on August 13,1990 and is scheduled to end on or about August 13,
- 2000, 1.4 AUTHORIZED NUCLEAR INSERVICE INSPECTOR Tests, examinations, repairs and/or replacements were witnessed or verified by an Authorized Nuclear Inservice Inspector for Hartford Steam Boiler Inspection & Insurance Company as indicated by signature on the examination data sheets. Hartford Regional Office is located at 15415 Katy Freeway, Suite 300, Houston, Texas.
2.0
SUMMARY
OF EXAMINATIONS AND TESTS 2.1 Piping and Components Examinations were conducted utilizing volumetric, surface and visual techniques in accordance with the requirements of the Code.
I Where a particular examination requirement of the Code is determined to be impractical, a request for relief from the requirement is submitted in accordance with the provisions of 10CFR50.55a(g)(6)(1). As permitted by Code Case N-460, relief is not requested when a reduction in examination coverage on a Code Class 1 or 2 weld is less than 10%. Refer to Appendix B for a summary of examinations performed during this outage. The relief request number is identifled in the " remarks" column of the
~3 summary for each examination area requiring relief. Relfel Requests generated during this outage are contained in Appendix C.
l a
Volumetric Examinations i
64 Ultrasonic examinations were completed. There were no unacceptable indications identified.
b.
Surface Examinations I
l 43 Liquid penetrant examinations and 45 magnetic particle O
examinations were completed. There were no unacceptable indications identified.
c.
Visual Examinations 254 Visual examinations of components and their supports were completed. There were no conditions identified that adversely affected the ability of a component or support to perform its intended function.
2.2 Pressure Tests System leakage, functional and inservice tests were performed during the period covered by this report. These tests were conducted under the following work orders.
4-93-044930-00 3-93-309869-01 4-93-045893-00 4-93-044922-00 4-93-045896-00 4-93-044929-00 4-93-044924-00 4-93-044925-00 4-93-044928-00 4-93-045899-00 4-93-045886-00 4-93-044926-00 4-93-044927-00 4-93-045186-00 4-93-044931-00 All areas of leakage were either corrected or subjected to an evaluation as described in IWA-3522.
2.3 Eddy Current Full length examination of 3686 steam generator tubes was performed using multi-frequency bobbin coil techniques. This represents 20.2% of the active (non-plugged) tubes in the four generators. This sample included all tubes with previously detected indications. Additionally, five tubes were examined using rotating pancake coil (RPC) methodology to assist in characterizing distorted signals.
Steam Generator # Tubes Examined Row / Column /% Thru-Wall 1
1838 40/18/15 40/36/37 9/59/35 49/67/38
'1/82/7 4
1848 4/4/32 45/41/23 33/60/19 4/87/12 39/95/35 7/107/14 As indicated by the above table there were no tubes exceeding the 40% thru-wall plugging limit, and as such, no tubes were plugged.
1 l
i
- O
6 a
t I
I
,i o
i s.
I i
ife b
f r
I 4
5
'I t
p a
i t
4*4 t
.)
e h
6 s
APPENDIX A
I T
.E I
o i
L
)
i l
I l
t
' l l
)
' i d
i i
j I
i a
i i
l l
..l i
- l
.,_,nc.,
n
FORM NIS.1-OWNER'S REPORT FOR INSERVICE INSPECTIONS Sheet 1 of 1 As required by the Provisions of the ASME Cod: Rules (Front)
- 2. Plant Comanche _ Peak Steam Electric Station - Glen Rose, Texas 76043 (Name and Address of Plant)
- 3. Plant Unit No. 1
- 4. Owner Certificate of Authorization (if required)
N/A
- 5. Commercial Service Date 8/13/90
- 6. National Board Number for Unit N/A
- 7. Components inspected Manufacturer Component or Manufacturer or Installer
- State or National Appurtenance or Installer Serial No.
Province No.
Board No.
Reactor Vessel Combustion Ener.. Inc.
10773 TBX-RCPCRV-01 22187 Steam Gen. 1 Westinghouse Elec. Corp.
2191 TBX-RCPCSG-01 W18585 Steam Gen. 4 Westinghouse Elec. Coro.
2194 TBX-RCPCSG-04 W18588 TBX-SI Pumo 2 Pacific Pumos Div.
51668 SIAPSI-02 327 Horizontal TBX-Letdown HX Joseoh Gat Coro.
2268-1K CS AP.' Q-01 914 FW+1-3B-018 18" Valve Borg Warner 23996 1-FW-077 N/A Westingbuse Electro-12000GM885EH RH-1-RB-001 12" Valve Mechanical Division 010055740008 1-8701A W14546 O
Westinghouse Electro-10000CS88000 S1-1-RB-060 3
10" Valve Mechanical Division 000005740073 1-8956C W12300 RC Piping N-5 S/N System Brown & Root. Inc.
RC-1-1645 N/A N/A SI Piping N-5 S/N System Brown & Root. Inc.
S1-1-1644 N/A N/A CS Piping N-5 S/N System Brown & Root, Inc.
CS-1-1633 N/A N/A RH Piping N-5 S/N system Brown & Root. Inc.
RH-1-1632 N/A N/A FW Piping N-5 S/N System Brown & Root. Inc.
FW-1-1650 N/A N/A IIS Piping N-5 S/N System Brown & Root, Inc.
MS-1-1648 N/A N/A CT Piping N-5 5/N System Brown & Root, Inc.
CT-1-1642 N/A N/A AF Piping N-5 S/N System Brown & Root. Inc.
A F-1-1616 N/A N/A i
i CC Piping N-5 S/N Svstem Brown & Root. Inc.
CC-1-1649 N/A N/A 00 Piping N-5 5/N System Brown & Root, Inc.
D0-1-1449 N/A N/A SW Piping N-5 S/N System Brown & Root, Inc.'
SW-1-1634 N/A N/A O
- " State of Province No." is not applicable,'this column indicates component tag number.
n2/sel This form (E00029) may be c:: tamed from the Orcer Dept.. ASME 22 Law Dove, Box 2300. Fairfield, NJ 07007-2300.
l r
O FORM NIS-1 (Back)
{
l
- 8. Examination Dates October 1, 1993 to December 31, 1993
- 9. Inspection Period Identification First
- 10. Inspection Interval Identification First Addenda N/A l
i1. Applicable Edition of Section XI 1986
~'
- 12. DateiRevision of Inspection Plan Aori1 2.1993. Rev. 2 i
- 13. Abstract of Examinations and Tests. Indude a list of examinations and tests and a statement conceming status of work required
~
for the Inspection Plan.
CPSES ' nit 1 Inservice Inspection Summary Report for the first interval, first J
period, third outage.
All required examinations have been completed.
- 14. Abstract of Results of Examinations and Tests.
CPSES Unit 1 Inservice Inspection Summary Report for the first interval, first 3'
- 15. period, thi rd outage.
Abstract of Corrective Measures.
CPSES Unit 1 Inservice Inspection Summary Report for the first interval, first period, third outage.
We certify that a) the statements made in this report are correct, b) the ernmmations and tests meet the Inspection Plan
[
as required by the ASME Code,Section XI, and c) corrective measures taken cor. form to the rules of the ASME Code, Section xi.
Cenificate of Authonzation No. (if applicable)
N/A Expiration Date N/A Date bIM v l
19 Signed M/7/I*v )* / 78 6/et k()l
" 2 3 /7 dVS By
//
owner
/
CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and Texa5 the State or Province of and employed by HSBI&I Co.
u Hartford. CT have inspected the components desenbed & this Owner's Repon during tbc period i
December 1992 December 190')
to
, and state that to w best of my knowledge and belief, the Owner has performed examinations and tests and it.a corrective measures desenbed in this Owner's Report in accordance I
with the Inspection Plan and as required by the ASME Code,Section XI.
By signing this centficate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations, tests, and corrective measures described in this Owner's Report. Funhermore, neither the Inspector nor his employer shall be liab!c in any manner for any personal injury or propeny damage or a loss of any kind arising from or connected with this inspection.
Commissions N%AS
/N spector's Signature Nsuonal Board. State. Pnmnce, and Endorsements _
Date OI NI N^rf C
19 14 O
.... ~.
c r
i t
a p
?
I
. J t
t
. 1
}
- t I
1 i
4 I
{
6a 1
. i
+
s 5
a 8
. i, APPENDIX B
P
. f i
S i
i i
4 e
8 i
l t
0
- I.
}
- t t
I r
f I
1 t
i e
t
.. 1 4
I r
t h
4 o,v--
',., - - e 7,,e
.w,
+-
i
~
APPENDIX B Summary of Examinations A tabulation of the ISI examination results has been developed and contains the following information:
a)
System name b)
Line number or component number - Example: 6-SI-1-089-2501R-1 orTBX-RCPCRV-1 (see additional explanation below) c)
Summary number - A computer data base assigned sequencing number d)
Examination area identification as shown on plant ISI iso - Example: TEX-1-1100-8 e)
ASME Sec. XI category and item number - Described in ASME Sec. XI examination tables (See explanation below of Note 1 which applies to supports) f)
NDE method - Identifies the examination method (s) as required by the ISI Plan g)
Procedure - Identifies the inspection procedure used to perfonn the examination h)
Examination results - No indication (NI), reportable indication (IU), non-reportable indication (NRI), indication due to geometry (GEOM) 1)
Remarks - Describes examination limitations, indication resolution and relief request numbers J)
Examination area description or pipe support number - Example: pipe to elbow or CC 105-012-E33K k)
Room number and elevation 1)
Calibration block - Example: TBX-18 Arrangement of these items is shown on the next page.
i Information contained within the line number:
6-SI-1-089-2501R-1 Pipe Size -
- Code Class System Material Specification j
Unit Unique Sequence Number 1
Explanation of Note 1:
Note 1:
Multiple item numbers apply. A VT-3 examination of the entire support examination boundary will be performed.
)
DATE: 12/01/93 COMANCHE PEAK UNIT 1 PAGE:
1 INSERVICE INSPECTION
SUMMARY
FIRST INTERVAL, FIRST PERIOD, THIRD OUTAGE (93RF)
CLASS 1 COMPLETED COMPONENTS p
ASME G
SEC. XI NE
SUMMARY
EXAMINATION AREA CATGY EXAM NRR0 Ri ARKS NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE IIIM ** CALIBRATION BLOCC**
RFACTOR COOLANT TBX-RCPCRV-01 000100 TBX-1 1100-1 B-A UT-6,0,6, TX-ISI-54-RO X
8% NOT EXAMINED. REF CODE CASE N-460.
RV FLANGE TO SHELL WELD B1.30 UT-12,16 TX-ISI-54 RO X
EXAMINED FROM RV 180 DEG TO RV 360 DEG.
l
- RV-7**
001900 TBX-1 1100A-19 B-D UT10,30,50 TX-ISI 254ROFC1 X
RV OUTLFI N0ZZLE TO VESSEL B3.90 WELD (LOOP 4) l
.egy.7e*
l l
001910 TBX-1 1100A-191R B-D UT-70 TX-ISI-254ROFC1 X
9% NOT EXAMINED. REF CODE CASE N-460.
RV OUTLET N0ZZLE INNER RADIUS B3.100 (LOOP 4)
..gy. j u 002200 TBX-1-1100A-22 B-D UT10,30,50 TX-ISI-254ROFC1 X
RV OUTLET NOZZLE TD VESSEL B3.90 WELD (LOOP 3)
- gy.7.e 002210 TEX-1-1100A 221R B-D UT-70 TX-ISI 254ROFC1 X 9% NOT EXAMINED. REF. CODE CASE N-460.
RV OUTLET N0ZZLE INNER RADIUS B3.100 (LOOP 3) l
- RV-1**
002300 TBX-1-110DA-23 B-D UT10,30,50 TX-ISI-254R0tC1 X
RV OUTLET N0ZZLE TO VESSEL B3.90 WELD (LOOP 2)
- RV-7**
k
DATE: 12/01/93 COMA %CHE PEAK UNIT 1 PAGE:
2 INSERVICE INSPECTION
SUMMARY
FIRST INTERVAL, FIRST PERIOD, THIRD OUTAGE (93RF)
/"
CLASS 1 COMPLETED COMPONENTS
'tg ASME G
SEC. XI NE
SUMMARY
EXAMINATIDN AREA CATGY EXAM NRR0 REMARKS NUMBER IDENTIFICAT!DN ITEM NO METHOD PROCEDURE IIIM ** CALIBRATION BLOCK **
PE ACTOR COOL ANT TBX-RCPCRV-01 002310 TBX-1-1100A-231R B-D UT-70 TX-ISI-254ROFC1 X
9% NOT EXAMINED. REF. CODE CASE N-460.
[
RV DUTLET NOZZLE INNER RADIUS B3.100 (LOOP 2)
- RV-1**
002600 TBK-1-1100A 26 B-D UT10,30,50 TX-ISI-254ROFC1 X
RV OUTLET N0ZZLE TO VESSEL B3.90 WELD (LOOP 1)
- gy.7..
002610 TBx 1-1100A-261R B-D UT-70 TX-ISI 254ROFC1 X
9% NOT EXAMINED. REF. CODE CASE N-460.
RV OUTLET N0ZZLE INNER RADIUS B3.100 (LOOP 1) l
- RV-1**
002700 TBX-1-1100-LIG B-G-1 UT-0 TX ISI-55 R0FC1 X 1/3 REQUIRED. EXAMINED RV FLANGE RV FLANGE LIGAMENTS (1/54) 86.40 LIGAMENTS 1 THRU 11 AND 48 THRU 54.'
- gy.3 005400 TBX-1-1400-1 B-G-1 UT-70,90 TX-ISI-115 R0 X
RV STUD B6.30 MT TX-ISI-70 R4FC1 X
- TBX-52**
)
005420 TBX-1-1400-2 B-G-1 UT-70,90 TX-ISI-115 R0 X
RV STUD B6.30 MT TX-ISI 70 R4FC1 X
- TBK-52**
j i
I
j DATE: 12/01/93 COMANCHE PEAK UNIT 1 PACE:
3 INSERVICE INSPECTION
SUMMARY
FIRST INTERVAL, FIRST PERIOD, THIRD OUTAGE (93RF)
['"~
CLASS 1 00MPLETED COMPONENTS
\\,
ASME G
SEC. XI NE
SUMMARY
EXAMINAT!DN AREA CATGY EXAM NRR0 REMARKS NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE IIIM
- CAllBRATIDW BLOCK'*
REACTOR COOLANT TBX-RCPCPV-01 1
005440 TBx-1 1400-3 B-G-1 UT-70,90 TX-ISI-115 R0 X
RV STUD B6.30 MT TX-1$1-70 R4FC1 X
- TBX-52**
005460 TBx-1-1400-4 B-G-1 UT-70,90 TX-ISI-115 RD X
RV STUD B6.30 MT TX-ISI-70 R4FC1 X
- T8X-52**
005480 TBX-1-1400-5 B-G-1 UT-70,90 Tx-ISI 115 R0 X
RV STUD B6.30 MT TX-ISI-70 R4FC1 X
- TBx-52**
005520 TBx-1-1400-7 B-G-1 UT-70,90 TX-ISI-115 R0 X
RV STUD B6.30 MT TX-ISI-70 R4FC1 X
- TBx 52**
005540 TBX-1-1400-8 B-G-1 UT-70,90 TX-ISI-115 R0 X
RV STUD B6.30 MT TX-ISI-70 R4FC1 X
- TBx-52**
005560 TBX-1 1400-9 B-G-1 UT-70,90 TX ISI-115 R0 X
RV STUD B6.30 MT TX-ISI-70 R4FC1 X
- T Bx - 5 2* *
. ~
DATE: 12/01/93' COMANCHE PEAK UNIT 1 PACE:
4 INSERVICE INSPECTIDN
SUMMARY
1 FIRST INTERVAL, FIRST PERIOD, THIRD DUTAGE (93RF)
I
.i
'fr~
CLASS 1 COMPLETED COMPONENTS -
U's ASME G
SEC. XI NE
SUMMARY
EXAMINATION AREA CATGY EXAM NRR0 REKARKS NUMBER IDENTIFICATIDN ITEM NO METHDD PROCEDURE IIIM
- CALIBRAT!DN BLOCK **
l i
I i
PEACTOR COOLANT TBX-RCPCRV-01 005580 TBX-1-1400-10 B-G-1 UT-70,90 TX-ISI-115 R0 X
RV STUD B6.30 MT TX-ISI-70 R4FC1 X
- TBX-52**
005600 TBX-1-1400-11 B-G-1 UT.70,90 TX-ISI-115 R0 X
RV STUD B6.30 MT TX-ISI-70 R4FC1 X
- TBX 52**
005620 TBX 1-1400-12 B-G-1 UT-70,90 TX-ISI-115 R0 X
RV STUD B6.30 MT TX-ISI-70 R4FC1 X
e I
- TBX-52**
005640 TBX-1 1400-13 B G-1 UT-70,90 TX-ISI-115 R0 X
RV STUD B6.30 MT TX-ISI-70 R4FC1 X
- TBX-52**
005660 TBX-1-1400-14 B-G-1 UT-70,90 TX-ISI-115 R0 X
RV STUD B6.30 MT TX-ISI-70 R4FCI X
- TBX-52**
I 005680 TBX-1-1400-15 B-G-1 UT 70,90 TX-ISI-115 RD X
RV STUD B6.30 MT TX-ISI-70 R4FC1 X
- TBX 52**
l DATE: 12/01/93 COMA %CHE PEAK UNIT 1 PAGE:
5 INSERVICE INSPECT!DN
SUMMARY
FIRST INTERVAL, FIRST PERIOD, THIRD QUTAGE (93RF)
CLASS 1 COMPLETED COMPONENTS AME G
SEC. XI NE
SUMMARY
EXAMINATION AREA CATGY EKAM NRR0 REMARKS NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE IIIM ** CALIBRATION BLDCK**
PEACTOR COOLANT TBX-PCPCRV-01 005700 TBX 1 1400-16 B-G-1 UT-70,90 TX-ISI-115 R0 X
RV STUO B6.30 MT TX-ISI-70 R4FC1 X
l t
- TBX-52**
f l
006440 TBX-1-1400-53 B-G-1 UT-70,90 TX-ISI-115 RD X
RV STUD B6.30 MT TX-ISI 70 R4FC1 X
t
- TBX 52**
006460 TBX-1-1400-54 B-G-1 UT-70,90 TX ISI-115 R0 X
RV STUD B6.30 MT TX-ISI-70 R4FC1 X
- TBX 52**
OD6480 TBX-1-1400-S-1 B-G-1 UT 70,90 TX-ISI 115 R0 X
S-1 PREVIOUSLY REPLACED STUD NO. 6.
RV STUD B6.30 MT TX-ISI 70 R4FC1 X (S-1 IS ALSO MARKED R-3812-1 713 C)
- TBX-52**
l 5
006600 TEX-1-1400-1 B G-1 MT TX ISI-70 R4FC1 X RV NUT B6.10 1
i 006620 TBX 1-1400-2 B-G-1 MT TX-ISI 70 R4FC1 X RV NUT B6.10 006640 TBX-1-1400 3 B-G-1 MT TX-ISI-70 84FC1 X RV NUT B6.10 l
l l
DATE: 12/01/93 COMANCHE PEAX UNIT 1 PAGE:
6 INSERVICE INSPECTION
SUMMARY
FIRST INTERVAL, FIRST PERIOD, THIRD OUTAGE (93RF)
CLASS 1 COMPLETED COMPONENTS l
\\
i ASME G
SEC. XI NE
SUMMARY
EXAMINATION AREA CATGY EXAM NRR0 REMARKS NUMBER IDE NTIF ICAT!DN ITEM NO METHOD PROCEDURE IIIM ** CALIBRATION BLOCK **
1 REACTOR COOL ANT TBX-RCPCRV-01 006660 TBX-1-1400-4 B-G-1 MT TX-IS!-70 R4FC1 X RV NUT B6.10 l
006680 TBX-1-1400-5 B-G-1 MT TX-ISI-70 R4FC1 X
RV NUT B6.10 l
l 006720 TBX-1-1400-7 B-G 1 MT TX-ISI-70 R4FC1 X RV NUT B6.10 i
l
E06740 TBX-1-1400-8 B-G 1 MT TX-ISI-70 R4FC1 X I
RV NUT B6.10 006760 TBX 1 1400-9 B-G-1 MT TX ISI-70 R4FC1 X RV NUT B6.10 006780 TBX-1-1400-10 B-G-1 MT TX-ISI 70 R4FC1 X
RV NUT B6.10 I
l 006800 TBX-1-1400-11 B-G-1 MT TX-ISI-70 R4FC1 X RV NUT B6.10 I
i
I DATE: 12/01/93 CDMANCHE PEAK U21T 1 PAGE:
7 INSERVICE INSPECTION SUMMART FIRST INTERVAL, FIRST PERIDO, THIRD OUTAGE (93RF)
CLASS 1 COMPLETED COMPONENTS U(%
ASME G
SEC. x1 NE
SUMMARY
EXAMINAT10N AREA CATGY EXAM NRR0 REKARKS
&! UMBER IDENTIFICATION ITEM No METHOD PROCEDURE IIIM ** CALIBRATION BLOCK **
RfACTDR CDOL ANT TBX PCPCRV-01 006820 TBx-1-1400-12 B-G-1 MT Tx-ISI-70 R4FC1 x RV NUT B6.10 0D6840 TBx-1-1400-13 B-G-1 MT Tx ISI-70 R4FC1 x
RV NUT B6.10 006860 TBx-1-1400-14 B-G-1 MT TX-ISI-70 R4FC1 X RV NUT B6.10
( '96880 TBx-1-1400-15 B-G-1 MT Tx ISI-70 R4FC1 x
\\s.,/I RV NUT B6.10 006900 TBx 1-1400 16 BG-1 MT TX-ISI-70 R4FC1 x RV NUT B6.10 007640 TBx-1-1400 53 B-G-1 MT TX-ISI-70 R4FC1 x
RV NUT B6.10 007660 TBX-1-1400-54 B-G-1 MT Tx-ISI-70 R4fC1 x
RV NUT B6.10
5 DATE: 12/01/93 COMANCHE PEAK UNIT 1 PAGE:
8 INSERVICE INSPECTION SUMMART FIRST INTERVAL, FIRST PERIOD, THIRD OUTAGE (93RF)
CLASS 1 COMPLETED COMPONENTS AWE G
SEC. El NE SUMMART EXAMINATIDN AREA CATGY EXAM NRR0 REMARKS
}
NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE IIIM
- CAllBRATION BLDCK**
t i
4 PEACTOR COOLANT TPX-RCPCRV-01
)
007680 TBX-1-1400-S-1 B-G-1 MT TX-ISI-70 R4FC1 X
S-1 PREVIOUSLT REPLACED NUT NO. 6.
RV NUT B6.10 (S-1 IS ALSO MARKED R-3415-1-213-v) t l
007800 TBX 1-1400-1 B-G 1 VT-1 TX-ISI-8 R2 X
RV WASHER 86.50 007820 TBX-1-1400-2 B-G-1 VT 1 TX-ISI-8 R2 X
l RV WASHER B6.50
<7840 TBX-1-1400-3 B-G 1 VT-1 TX-ISI-8 R2 X
i RV WASHER B6.50 I
007860 TBX-1-1400-4 B-G-1 VT 1 TX-ISI 8 R2 X
RV WASHER B6.50 007880 TBX-1-1400-5 B G-1 VT-1 TX-ISI-8 R2 X
RV WASHER B6.50 007920 TBX-1 1400-7 B G-1 VT 1 TX-IS!-8 R2 X
RV WASHER B6.50 en m
DATE: 12/01/93 COKANCHE PEAK DNIT 1 PAGE:
9 INSERVICE IkSPECTION SUMMART FIRST INTERVAL, FIRST PERIUD, THIRD DUTAGE (93RF)
CLASS 1 COMPLETED COMPONENTS N
AWE G
SEC. XI NE SUMKARY EXAMINATION AREA CATGY EXAM NRR0 REKARKS NUMBER IDENTIFICATION ITEM NO METH00 PROCEDURE 111M ** CALIBRATION BLOCK **
l l
REACTOR C00 TANT TBX-RCPCRV-01 i
007940 TBx-1-1400-8 B-G-1 VT-1 TX-ISI-8 R2 X
RV WASHER B6.50 t
0 007960 TBX-1-1400-9 B-G-1 VT-1 TX-ISI-8 R2 X
RV WASHER B6.50 007980 TBX-1-1400-10 B G-1 VT-1 TX-ISI-8 R2 X
RV WASHER B6.50 38000 TBX-1-1400-11 B-G-1 VT-1 TX-ISI-8 R2 X
s./
RV WASHER B6.50 s
008020 1BX 1-1400-12 B-G-1 VT-1 TX-ISI 8 R2 X
RV WASHER B6.50 008D40 TBX-1-1400-13 B-G-1 VT-1 TX-ISI-8 R2 X
RV WASHER B6.50 008060 TBX-1-1400-14 B-G-1 VT 1 TX-1$1-8 R2 X
RV WASHER B6.50 l
i t
i DATE: 12/01/93 COMANCHE PEAK UNIT 1 PAGE:
10 l
INSERVICE INSPECTION
SUMMARY
FIRST INTERVAL, FIRST PERIOD, THIRD OUTAGE (93RF)
'l
~'s CLASS 1 COMPLETED COMPONENTS u.
a ASME G
7 SEC. XI NE
SUMMARY
EXAMIhATION AREA CATGY EXAM NRR0 REMARKS r
WUMBER IDENTIFICATION ITEM NO METH00 PROCEDURE I1IM
- CAllBRAT]ON BLOCK **
REACTOR COOL ANT TBx-RCF'CRV 01 008080 TBx-1 1400-15 B-G-1 VT.1 TX-ISI-8 R2 x
RV WASHER B6.50 008100 TBX-1-1400-16 B-G-1 VT-1 Tx ISI-8 R2 X
RV WASHER B6.50
[
l 00B840 TBx-1-1400-53 B G-1 VT-1 TX-IS!-8 R2 X
RV WASHER B6.50
,B860 TBx-1-1400-54 B G-1 vi-1 TX-ISI-8 R2 X
RV WASHER B6.50 00B880 TBX-1 1400-S-1 B-G-1 VT 1 TX-IS!-8 R2 X
S-1 PREVIOUSLY REPLACED WASHER NO. 6.
i RV WASHER B6.50 (S-1 is ALSO MARKED 003-51) i RE ACTOR COOLANT TBx-RCPCSG-01 i
i 010200 TBx.1-3100-1-1 B-B UT-0,45,60 TX-ISI-210 R2 X
X 31% NOT EXAMINED. REF. RR. B-7.
SG1 CHANNEL HEAD TO TUBESHEET B2.40 WELD l
A23
- TBX-28**
I 010300 TBX-1-3100-1A B-D UT BEST EFFORT UT PERFORNED.
SG1 INLET N0ZZLE INNER RADIUS B3.140 REF. RR. B 4.
A23 i
i
t DATE: 12/01/93 CDMANCHE PEAK UNIT 1 PAGE:
11 INSERVICE INSPECTION
SUMMARY
FIRST INTERVAL, FIRST PERIOD, THIRD OUTAGE (93RF)
CLASS 1 COMPLETED COMPOWENTS O
AME G
SEC. XI NE
SUMMARY
EXAMINATION AREA CATGY EXAM NRR0 REMARKS EUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE IIIM ** CALIBRATION BLOCK **
REACTOR COOLANT TBX-PCPCSG-01 010400 TBx-1-3100-1B B-D UT BEST EFFORT UT EXAM PERFORMED.
SG1 OUTLET N0ZZLE INNER RADIUS 83.140 REF. RR. B-4.
A23 010500 TBx-1-3100-181 16 B-G-2 VT-1 TX-IS!-8 R2 X
SG1 HOTLEG MANWAY BOLTING B7.30 (1-81/1 B16)
A23 010600 TBx-1-3100-1817-32 B-G-2 VT-1 Tx-ISI 8 R2 X
SG1 COLDLEG MANWAY BOLTING B7.30 (1 B17/1 B32)
A23 REACTOR COOLANT 29-PC-1-001-WEST-1 012200 TBX 1 4100-1 B-F UT-0,70 TX ISI-254ROFC1 X
RPV N0ZZLE TO SAFE END B5.10 PT TX-ISI-11 R4FC1 X
A23 827RB
..gy.6**
012300 TBX-1-4100-2 B-J UT-0,70 TX-ISI-254ROFC1 X
RI ACCEPTABLE. REF. ONE FORM 93-1859.
SAFE END TO PIPE B9.11 PT TX*ISI-11 R4FC1 X
A23 827RB e.gy.6**
PES! DUAL HEAT REMOVAL 12-EM-1-001-2501R-1 015800 TBX-1-4101 8701A-BLTG B-G-2 VT-1 TX-ISI-8 R2 X
VALVE BODY BOLTING B7.7D R154 817RB i
l
i i
DATE: 12/01/93 COMANCHE PEAK UNIT 1 PAGE:
12 INSERVICE INSPECTION SUMMART FIRST INTERVAL, FIRST PERIDO, THIRD DUTAGE (93RF) f --
CLASS 1 COMPLETED COMPONENTS k
ASME G
SEC. XI NE
SUMMARY
EXAMINATION AREA CATGY EXAM NRR0 REMARKS EUMBER IDENTIFICATION ITEM NO METH00 PROCEDURE IIIM ** CALIBRATION BLOCK **
SAFETY INJECTION 2-51-1-063-2501R-1 018800 TBX-1-4103-13 B-J PT TX-ISI-11 R4FC1 X i
SOCKOLET TO PIPE B9.32 R154 820RB 018900 TBX-1-4103-14 B-J PT TX-ISI-11 R4FC1 X
PIPE TO SOCK 0tET E9.40 R154 820RB 019000 TBX-1-4103-15 B-J PT TX-ISt-11 R4FC1 X i
VALVE TO PIPE B9.40 l
R154 820RB t
SAFETY INJECTIDW 1.5-St-1-025-25019-1 k
023900 TBX-1-4107-FLANGE #1 B-G-2 VT-1 TX-ISI-8 R2 X
FLANGE BOLTING B7.50 R154 822RB PEACTOP COOLANT 29 PC 1-023-WEST-1 029200 TBX-1-4200-1 B-F UT 0,70 TX-ISI 254ROFC1 X RPV N0ZZLE TO SAFE END B5.10 PT TX-!SI 11 R4FC1 X A25 827RB eepy.sse 029300 TBX-1-4200-2 B-J UT-0,70 TX-ISI-254ROFC1 X
SAFE END TO PIPE B9.11 PT TX-ISI-11 R4FC1 X A25 B27RB
- RV-6**
t
DATE: 12/01/93 COMA %CHE PEAK UNIT 1 PAGE:
13 INSERVICE INSPECTION
SUMMARY
-FIRST INTERVAL, FIRST PERIOD, THIRD OUTAGE (93RF)
/
CLASS 1 COMPLETED COMPONENTS ASME G
SEC. XI NE
SUMMARY
EXAMINATIDN AREA CATGY EXAM NRR0 REMARKS NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE IIIM
- CAllBRATION BLOCK **
SAFETY INJECTION 1.5-SI-1-026-2501R 1 D40700 TBX-1 4205-32 B-J PT TX-ISI-11 R4FC1 X PIPE TO COUPLING B9.40 R154 817RB D40800 TBX-1-4205-33 B-J PT TX-ISI-11 R4FC1 X COUPL]NG TO PIPE B9.40 R154 817RB 040900 TBX-1-4205-34 B-J PT TX-ISI-11 R4FC1 X PIPE TO ELBOW 89.40 R154 817RB I
11000 TBX-1-4205-35 B-J PT TX-ISI-11 R4FC1 X ELBOW TO PIPE B9.40 R154 81TRS 041100 TBX-1-4205-36 B-J PT TX-!SI-11 R4FC1 X
PIPE TO ELSDW B9.40 R154 818RB 041300 TBX-1-4205-38 B-J PT TX-ISI 11 R4FC1 X PIPE TO REDUCER B9.21 R154 81BRB REACTDR COOLANT ?9-RC-1-040-WEST-1 D43600 TBX-1-4300-1 B-F UT-0,70 TX-ISI-254ROFC1 X
RPV N0ZZLE TO SAFE END B5.10 PT TX-IS! 11 R4FC1 X A27 B27RB
- RV-6**
\\
DATE: 12/01/93 CDMANCHE PEAK UNIT 1 PAGE:
14 INSERVICE INSPECTION
SUMMARY
FIRST INTERVAL, FIRST PERl00, THIRD DUTAGE (93RF) i j'~~'
CLASS 1 COMPLETED COMPONENTS ASME G
SEC. XI NE
SUMMARY
EXAMINATION AREA CATGT EXAM NRR0 REHARKS WUMBER IDENTIFICATIDN ITEM NO METHOD PROCEDURE IIIM
- CALIBRATIDN BLOCK'*
PEACTDR COOLANT 29-RC-1-D40-WEST-1 043700 TBX-1-4300-2 B-J UT 0,70 TX-ISI 254ROFC1 X
R1 ACCEPTABLE. REF. DNE FORM 93-1862.
SAFE END TO PIPE B9.11 PT TX-ISI-11 R4FC1 X
A27 827RB
..gy.6**
RF ACTOR COOL ANT 31-RC-1-041 WEST-1 044200 TBX-1-4300-7 B-J UT 45L TX-ISI-211 R2 X
PIPE TO ELBOW 89.11 PT TX-ISI-11 R4FC1 X A27 821RB 4
- TBX-57'*
t D44300 TBX.1-4300-8 B-J UT-45L TX-ISI-211 R2 X
ELBOW TO PIPE B9.11 PT TX-ISI-11 R4FC1 X A27 817RB
- TBX 57**
045100 TBX-1-4300-16 BJ PT TX-ISI-11 R4FC1 X PIPE TO BRANCH CONNECTION B9.32 A27 816RB SAFETY INJECTIDW 10-$1-1-181-2501R-1 04721D TBX-1-4301 8956C B-N-2 VT-3 NQA 3.09-8.50R2 X
i VALVE BODY INTERNAL SURFACES B12.50 A27 823RB I
$AFETT INJECTION 2-SI-1-067-?501R 1 04B800 TBX-1-4302-16 B-J PT TX-ISI-11 R4FC1 X PIPE TO ELBOW B9.40 R154 815RB h.
DATE: 12/01/93 COMANCHE PEAK UNIT 1 PACE:
15 INSERVICE INSPECTION
SUMMARY
FIRST INTERVAL, FIRST PERIOD, THIRD DUTAGE (93RF) f'"'A CLASS 1 COMPLETED COMPONENTS ASME G
SEC. XI NE SUMKARY EXAMINATION AREA CATGY EXAM NRR0 REKARKS NUMSER IDENTIFICATION 11EM NO METHOD PROCEDURE IIIM ** CALIBRATION BLOCK **
SAFETY IN ![CTION 2 ST-1-067-2501R-1 D48900 TBX-1-4302-17 BJ PT TX-ISI-11 R4FC1 X
. ELBOW TO PIPE B9.40 R154 815RB REACTOR COOLANT 29 RC-1-058-WEST-1 063200 TBX-1-4400-1 B-F UT-0,70 TX-!SI-254ROFC1 X
RI ACCEPTABLE. REF. DNE FORM 93 1861.
RPV N0ZZLE TO SAFE END B5.10 PT TX-ISI-11 R4FC1 X
A29 827RB
- RV-6**
D63300 TBX-1-4400-2 B-J UT-0,70 TX-ISI-254ROFC1 X
SAFE END TO PIPE B9.11 PT TX-ISI-11 R4FC1 X A29 827RB
- RV-6**
SAFETY TNJECTION 2-SI 1-086 2501R-1 072800 TBX-1 4404-19 B-J PT TX-ISI-11 R4FC1 X PIPE TO 1EE B9.21 R154 819RB 072900 TBX-1-44D4 20 B-J PT TX-ISI-11 R4FC1 X TEE TO PIPE B9.21 R154 819RB l
DATE: 12/01/93 COMANCHE PEAK UNIT 1 PAGEt 16 INSERVICE INSPECTIC' SUMMART J
FIRST INTERVAL, FIRST PERIOD, THIRD OUTAGE (93RF)
CLASS 2 COMPLETED COMPONENTS V
ASME G
SEC. XI NE SUMMART EXAMINATION AREA CATGT EXAM NRR0 REMARKS NUMBER IDENTIFICATION ITEM No METHCD PROCEDURE IIIM ** CALIBRATION BLOCK **
CHEMICAL & VOLUME CONTROL TBX-CSAHLD-01 103300 TBX-2-1140-1 C-A UT-45,60 TX-IS! 209R2FC1 X
X HORZ. LETDOWN HX HEAD To C1.20 FLANGE WELD R81 81158
- TBX 31**
FEEDWATER 18-1-FW-035-2003-2 129350 TBX-2-P201 FW-077 CG MT TX-ISI-70 R4FC1 X VALVE BOOT WELD C6.20 R100AB56SB FEEDWATER 6-FV-1-097-1303 2 2200 TBX-2-2302-27 C-F-2 UT-0,45 TX-ISI 208 R2 X
PIPE TO PIPE (PENETRATION)
C5.51 MT TX*lSI-70 R4FC1 X R155A864RB "TBX 35**
152800 1BX-2 2302 33 C-F 2 UT-0,45,60 TX-IS!-208 R2 X
X ELBOW TO PIPE C5.51 MT TX-ISI-70 R4FC1 X
R155A864RB
- TBX-35**
FEEDWATER 6-FW-1-101-1303-2 156400 TBX-2-2302 69 C-F-2 MT TX-ISI 70 R4FC1 X
WELDOLET C5.81 R155A857RB O
i
i DATE: 12/01/93 C0KANCHE PEAK UNIT 1 PAGE:
17 INSERVICE INSPECTION
SUMMARY
FIRST INTERVAL, FIRST PERIOD, THIRD DUTAGE (93RF)
CLASS 2 COMPLETED COMPONENTS s
ASME G
j SEC. XI NE I
SUMMARY
EXAMINATION AREA CATGY EKAM NRR0 REKARKS NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE IIIM ** CALIBRATION BLOCK **
t FEEDWATER 6-FW-1-101 1303 2 156500 TBX-2-2302-70 CF2 UT-0,45,60 TX-ISI-208 R2 X
X 9% NOT EXAMINED BY UT.
REF. CODE CASE BRANCH CONNECTION TO Pl"E C5.51 MT TX-ISI-70 R4FC1 X N-460.
R155A858RB
- TBX-35**
MAIN STEAM 32-MS-1-004-1303-2 160400 1BX-2-2400-17 C F-2 UT-45 TX-ISI-208 R2 X
PIPE TO PIPE (PENETRATION)
C5.51 MT TX-ISI-70 R4FC1 X R155A877RB
- TBX 33**
160450 TBX 2 2400-17L C-F-2 UT-45 TX-ISI-208 R2 X
LONG SEAM (2.51 ADJ. WELD 17) C5.52 MT TX-ISI-70 R4FC1 X g
R155A877RB
- TBX-33**
FEErWATFR 6-FW-1-102-1303-g 172200 TBX-2-2402-61 C-F 2 UT-0,45,60 TX-ISI-208 R2 X
9% NOT ext.MINE3 BY UT. REF. CODE CASE PIPE TO VALVE (FLANCED)
C5.51 MT TX ISI 70 R4FC1 X N 460.
R155A860RB
- TBX-35**
172300 TBX-2-2402-64 C-F-2 UT-0,45,60 TX-151-208 R2 X
X 7% NOT EXAMINED BY UT. REF. CODE CASE VALVE (FLANCED) TO PIPE C5.51 MT TX-Ist 70 R4FC1 X N-460.
R155AS60RE
- TBX 35**
1 1
RESIDUAL NEAT REMOVtt 12-RM 1-003-601R-2 174100 TBX 2 2500-7.
C-F 1 UT-0,60 TX 1$1 207 R2 X
PIPE TO ELBOW C5.11 PT TX-ISI-11 R4FC1 X
R77S 817SB
- TBx.11**
f
(
l
.i l
DATE: 12/0t/93 00MANCHE PEAK UWii 1 PAGE:
18 INSERV!CE INSPECTION
SUMMARY
FIRST INTERVAL, FIRST PERIOD, THIRD DUTAGE (93RF)
CLASS 2 COMPLETED COMPONENTS ASME G
SEC. XI 4E
SUMMARY
EXAMIN4 TION AREA CATGY EKAM NRR0 REKARKS I
KUMBER IDENTIFICATIDW ITEM NO METHOD PROCEDURE IIIM
- CALIBRATIDN BLOCK **
RESIDUAL HEAT REMOVAL 12-RM-1-003-601R-2 174140 TBX-2 2500-7L C-F-1 UT-0,60 TX-ISI-207 R2 X
LONG SEAM (2 5T ADJ WELD 7)
C5.12 PT TX-ISI 11 R4FC1 X R77S 8175B
- TBX-11**
174200 TBX-2-2500-8 C-F-1 UT-0,60 TX-ISI-207 R2 X
RI ACCEPTABLE. REF ONE FDRM 93 1919 ELBOW TO PIPE C5.11 PT TX-ISI-11 R4FC1 X
R77S 816SB l
- TBX-11**
174250 TBX-2-2500-8L C-F-1 UT 0,60 TX-ISI-207 R2 X
LDhG SEAM (2.5T A0J. WELD 8)
C5.12 PT TX ISI-11 R4FC1 X R775 816SB
- TBX-11**
SAFETY INJECTION 10-St-1-095-?501R-2 207000 TBX-2-2530-29 C F-1 UT-45,70L TX-ISI-207 R2 X
15% NOT EXAM!uED BY UT. REF. R.R. C 8.
PIPE TO VALVE C5.11 PT TX-ISI-11 R4FC1 X RT7S 8125B
- TBX-9**
207100 TEX 2-2530-30 C-F-1 UT-59,70L TX-ISI-207 R2 X
20% NOT FKAMINED BY UT-REF R.R. C-8.
VALVE TO P!PE C5.11 PT TX ISI-11 R4FC1 X R775 812SB
- TBX-9**
SAFETY INJECTf DW 4 St-1-044-1501R-2 269600 TBX 2-2561-30 C-F-1 UT 0,45 TX-ISI 207 R2 X
PIPE TO ELBOW C5.21 PT TX-ISI-11 R4FC1 X R77S 81258
- TBX-45**
I DATE: 12/01/93 COMANCHE PEAK UNIT 1 PAGE:
19 I
INSERVICE INSPECTION
SUMMARY
FIRST INTERVAL, FIRST PERIOD, THIRD OUTAGE (93RF)
CLASS 2 COMPLETED COMPONENTS O
ASME G
SEC. XI NE
SUMMARY
EXAMINATION AREA CATGY EXAM NRR0 REMARKS C1MBER IDENTIFICATION ITEM NO METHOD PROCEDURE 1IIM
- CAllBRAT]ON BLOCK'*
SAiETY INJECTION 3-SI-1 050-1501R-2 7.32700 TBX-2 2565 36 C-F-1 UT-0,45 TX-ISI 207 R2 X
PIPE TO REDUCER C5.21 PT TX-ISI-11 R4FC1 X R67 7925B
- TBX-44**
l CONTAINMENT SPRAY 16-CT-1-013-301R-2 314700 TBX-2-2571-16 C-F-1 UT-0,59 TX-ISI-207 R2 X
X PIPE TO ELBOW C5.11 PT TX-ISI-11 R4FC1 X R77S 817SB
- TEX-48**
l l
l 314750 TBX-2-2571-16L C-F-1 UT-0,59 TX-ISI-207 R2 X
LONG. SEAM (2.5T ADJ. WELD 16) C5.12 PT TX-IS]-11 R4FC1 X R77S 8175B
- TBX-48**
314800 TBX-2-2571-17 C-F-1 UT-0,59 TX-ISI-207 22 X
X ELBOW TO P]PE C5.11 PT TX-ISI-11 R4fC1 X R77S 818SB
- TBX-48**
314850 TBX-2 2571-17L C-F-1 Lt-0,59 TX-ISI-207 R?
/
LONG. SEAM (2.5T ADJ. WELD 17) C5.12 PT TX-ISI 11 R4FC1 R775 818SB
- TBX-48**
SAFETY INJECTION 18-SI-1-342-151R 2 333200 TBX-2-2581-4 C-F-1 UT-0,45 TX-!SI-207 R2 X
X PIPE TO REDUCER C5.11 PT TX-ISI 11 R4FC1 X R70 803SB
- TBX-49**
4 DATE: 12/01/93 COMANCHE PEAK UNIT 1 PAGE:
29 l
INSERVICE INSPECTION SUMMART FIRST INTERVAL, FIRST PERIOD, THIRD OUTAGE (93RF) f
CLASS 2 CDMPLETED COMPONENTS ASME G
SEC. XI NE
(
SUMMARY
EXAMINAT!DN AREA CATGT EXAM NRR0 REKARKS
[
NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE IIIM ** CAL!BRATION BLOCK **
b SAFETY INJECTION 18-St.1-342-151R 2 l
338250 TBX-2-2581-4L C-F-1 UT 0,45 TX-ISI-207 R2 X
i LONG. SEAM (2.5T ADJ. WELD 4) C5.12 PT TX-ISI.11 R4FC1 X
' RTO 803S8 l'
.* TEX-49**
I SAFETT INJECTION TBx-STAPSI-02 400400 TBX 2-3140-BLTG
'C-D UT-7 TX-ISI-115 RD X
l St PUMP #2 BOLTING C4.30 (2-B1/2-832) 460 773SB j
I
- TBX-53**
h l
)
k l
a
9 DATE: 12/01/93 COMANCHE PEAK U31T 1 PACE:
21 INSERVICE INSPECTION
SUMMARY
FIRST INTERVAL, FIRST PERIOD, THIRD DUTAGE (93RF)
CLASS 1 COMPLETED COMPONENTS AME G
SEC. x!
NE
SUMMARY
EXAMINATION AREA CATGY EXAM NRR0 REKARKS EUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE IIIM ** CALIBRATION BLOCK **
CHEMICAL & votVME CONTROL 2-CS-1-112-2501R 1 l
652900 TBx-1-4505-H17 F-B VT-3 TX-ISI-8 R2 X
CS-1 -112-723-C51R NOTE 1 R30 857RB 653000 TBX.1 4505-H16 F-B VT-3 TX ISI-8 R2 x
CS-1-112-724-C51R NOTE 1 R30 859RB t
REACTOR C00 TANT 4-RC-1-018-2501R-1 4
657700 TBx-1-45D4-H2O F-C VT-3 TX ISI-8 R2 x
i RC-1-018-026-C61R NOTE 1
{
R30 872RR 657800 TBX-1-4504-H19 F-C VT-3 TX-ISI-8 R2 x
RC-1 018-027-C61R NOTE 1 R30 871RB i
657900 TBX-1-45D4-H17 F-C VT-3 TX-1$1-8 R2 x
RC-1-018-029 C61R NOTE 1 R30 864RB 658000 TBX-1-4504 HFI F-C VT-3 TX-ISI-8 R2 x
RC-1 018-031 C61K NOTE 1 R30 862RB 658100 TBX-1-45D4 H13 F-C VT-3 TX-ISI-8 R2 x
RC 1-018-032-C61R NOTE 1 R30 862RB 4
i
DATE: 12/01/93 COMANCHE PEAK UNif 1 PAGE:
22 INSERVICE INSPECTIDN
SUMMARY
FIRST INTERVAL, FIRST PER100, THIRD OUTAGE (93RF)
~~
CLASS 1 COMPLETED COMPONENTS
/
s
(
I J
ASME G
g SEC. XI NE
SUMMARY
EXAMINATIDN AREA CATGY EXAN NRR0 REMARKS NUMBER IDENTIFICATION
' TEM NO METHOD PROCEDURE IIIM ** CALIBRATION BLOCK **
RE ACTOR C00t ANT 4-RC-1-018-2501R-1 658200 TBx-1-4504-H11 F-C VT-3 TX-1$1-8 R2 x
RC 1-018-033-C61K NOTE 1 R30 862RB 65B500 76x-1-4504-H18 FC VT-3 TX-IS!-8 R2 x
RC-1-018-045-C61R NOTE 1 R30 864RS 659100 T B X-1-4504 - H 16 F-C VT-3 Tx-ISI-8 R2 x
RC-1-018-049-C61K NOTE 1 R30 B62RB
,m
[
394DO TBx-1-4504-H14 F-C VT-3 Tx-ISI-8 R2 x
\\
_s RC-1-018-052-C61R NOTE 1 R30 862RB 659500 TBx-1-4504-H12 F-C VT-3 TX-SI-8 R2 x
RI ACCEPTABLE. REF. DNE FORM 93-2053.
RC-1 018-053-C61S NOTE 1 R30 B62RB 659600 Tsx-1 4504-H22 FC VT-3 TX-ISI 8 R2 x
RC-1-018 054-C61R NOTE 1 R30 B83RB PE ACTCR CDot ANT 4 - P C 075 - 2501 R - 1 663000 TBx-1-4503 H17 F-C VT-3 TX-ISI 8 R2 x
RC 1 075-004-C61R NOTE 1 R30 S82RR f% \\
\\
DATE: 12/01/V3 CDMANCHE PEAK UNIT 1 PAGE:
23 INSERVICE INSPEC110N
SUMMARY
(
FIRST INTERVAL, FIRST PERIOD, THIRD OUTAGE (93RF)
'N CLASS 1 COMPLETED CD4?SNENTE ASME G
[
SEC XI NE
SUMMARY
EXAMINATION AREA CATGY EKAM NRR0 REMARKS
[
EUMBER IDENTIFICATIDW ITEM NO METHOD PROCEDURE IIIM
- CALIBRATIDN BLOCK **
i L
f RE ACTOR COOL ANT 4-9C 075-25012-1 663400 TBX-1 4503-H14 F-C VT-3 TX-ISI-8 R2 X
RC 075-027-C61R NOTE 1
{
R30 873RB 663500 TBX-1-4503-H10 F-B VT-3 TX-ISI-8 R2 X
RC-1-075-029-C51R NOTE 1 R30 857RB
?
663600 TBX-1-4503-H8 F-C VT-3 TX-!$I-8 R2 X
RC-1 075-031-C51K NOTE 1 l
R30 848AB L
l
\\' 700 TBX-4503-H3 F-C VT-3 TX-ISI-8 R2 X
R C-1-075-034-C51K NOTE 1 R30 846RB 663800 TBX 1-4503 H6 F-C VT-3 TX-!SI-8 R2 X
RC-1 -075- 041 -C51K NOTE 1 R30 846RB
[
663900 TBX-1-4503-H5 F-C VT-3 TX-ISI-8 R2 X
R C 075-D42-tS15 NOTE 1 R30 846RB i
664000 TBX-1-4503-H2 FC VT-3 TX-ISI-8 R2 X
RC-1 075-D43-C51K NOTE 1 R30 842RB 9
l
DATE:.12/01/93 CDMANCHE PEAK UNIT 1 PAGE:
24 INSERVICE INSPECTION
SUMMARY
FIR $T INTERVAL, FIRST PERIOD, THIRD OUTAGE (93RF)
CLAS$ 1 COMPLETED COMPONENTS ASME G
SEC. XI NE l
SUMMARY
EXAMINATION AREA CATGY EXAM NRR0 REMARKS WUMBER IDENTIFICATION ITEM NO METHOD PRDCEDURE IIIM ** CALIBRATION BLOCK'*
I RE ACTOR COOL ANT 4 RC-1-075-2501R-1 I
664100 TBX-1-4503-H1 F-C VT-3 TX-ISI 8 R2 X
RC-1 075-044-C51K NOTE 1 R30 B42RB i
664200 TBx-1-4503-H9 FC VT-3 TX Is!-8 R2 X
RC+ 1 -075-045-C51K NOTE 1 R30 849RB 664300 TBX-1-4503-H12 F-C VT-3 TX-ISI-8 R2 X
RC-1-075-046-C61R WOTE 1 R30 872RB
/
'54400 TBx *,4503-H11 F-C VT-3 TX Is!-8 R2 X
\\s.,/!
R C-1 -075- 047-C51R NOTE 1 R30 858RB t
664500 TBx-1-4503-HT F-C VT-3 TX-ISI-8 R2 X
RC-1 075 048-C51K NOTE 1 R30 846RB 664800 TBx-1-4503-H4 F-C VT 3 TX-Is!-8 R2 X
RC-1-075-051 C51K NOTE 1 R30 846RB 665100 TBx-1 4503-H16 F-C VT-3 TX-ISI 8 R2 X
RC-1 075-054 C61R NOTE 1 R30 BS2RB
[
\\
I l
DATE: 12/01/93 CDMANCHE PEAK UNIT 1 PAGE:
25 l
INSERtlCE INSPECTION
SUMMARY
fissi iniEEVAL, FIRST PER100, THIRD OUTAGE (93RF)
's CLASS 1 COMPLETED COMPONENTS i
ASME G
SEC. XI NE CUMMARY EXAMINATION AREA CATGY EXAM NRR0 REMARKS NUMBER IDENTIFICATION ITEM NO METH00 PROCEDURE IIIM
- CAllBRATION BLOCK **
l REACTOR COOL ANT TBX-RCPCPR-01 689600 TBX-1-1100-RVS-1 F-B VT-3 TX-ISI-8 R2 X
T8X-RCESRV-01-R1 NOTE 1 R01 859RB 689625 TBX-1 1100-RVS-2 F-B VT-3 TX-ISI-8 R2 X
TBX RCESRV-02-R2 NOTE 1 RO1 859RB 689650 TBX-1-1100-Rvs-3 F-B VT-3 TX-ISI-8 R2 X
TBX-RCESRV-03-R3 NOTE 1 R01 859RB 1
Gjp9675 TBX-1-1100-RVS-4 F-B VT-3 TX-Ist-8 R2 X
TEX RCESRV-04-R4 NOTE 1 R01 859RB r
REACTOR COOLANT TBX-RCPCSG-02 690200 TBX 1 3100-SG2-US1 FB VT-3 TX ISI-8 R2 X
TBX RCESSG-02-U1 NOTE 1 A26 f,59RB i
690220 TBX-1 3100-SG2-US2 F-B VT-3 TX ISI-8 R2 X
I TBX RCE,tSG-02-U2 NOTE 1 A26 859RB I
690240 TBX 1-3100-SG2-US3 F8 VT-3 TX ISI-8 R2 X
-l TBX-RCESSG-02-U3 NOTE 1 A26 859RB
DATE: 12/01/93 CDMANCHE PEAK UNIT 1 PAGE:
26 INSERVICE INSPECTION
SUMMARY
FIRST INTERVAL, FIRST PERIOD, THIRD OUTAGE (93RF)
<-'s CLASS 1 COMPLETED COMPONENTS ASME G
SEC. XI NE
SUMMARY
EXAMINATION AREA CATGY EXAM NRR0 REMARKS i
NUMBER IDENTIFICATION ITEM NO METHOD PRDCEDURE IIIM
- CAllBRATION BLDCK'*
RFACTOR COOLANT TBW-RCPCSG-02 t
690280 TBx-1 3100-SC2-SN1 F-C VT 3 TX ISI-8 R2 X
TBX-RCESHS 07 NOTE 1 A26 859RB t
690290 TBx-1-3100-SG2-SN2 F-C VT-3 Tx-ISI-8 R2 X
1 TBX RCESHS-09 NOTE 1 A26 859RB I
i a
c e
9
DATE: 12/01/93 COKANCHE PEAK UNIT 1 PAGE:
27 INSERVICE INSPECTION
SUMMARY
s FIRST INTERVAL, FIRST PERIOD, THIRD DUTAGE (93RF)
CLASS 2 COMPLETED COMPONENTS N
ASME G
SEC XI NE
SUMMARY
EXAMINATIDN AREA CATGY EXAM NRR0 REMARPS NUMBER IDENTIFICATIDN ITEM NO METHOD PROCEDURE IIIN
- CALIBRATIDN BLDCK**
FEEDWATER 18-FW-1-0,7-1303-2 720100 TBX-2-2301 H22 F-B VT-3 TX-IS!-8 R2 X
FW-1-017 714 C52R NOTE 1 R13 856RB i
720300 TBX-2-2301-H24 F-C VT-3 TX-ISI-8 R2 X
FW-1 017-716 C52R NOTE 1 R13 856RB FEEDWATER 18-FW-1-018-1303-2 724100 TBX-2-2201-H34 F-C VT-3 TX-ISI-8 R2 X
RI IS ACCEPTABLE. REF. DNE FORM FW-1-018 716-C52K NOTE 1 93-2075.
R13 856aB s.
FEEDWATER 18-FW-1-019-130};l FW 1 0 9 706 C52K NO E 1 f
R13 856RB T25400 TBX-2-2101-HS FC VT-3 TX ISI-8 R2 X
FW-1-019 707-C52$
NOTE 1 R13 856RB j
FEEDWATER 18-FW-1-020-1303-2 725700 TBX-2 2401-H9 F-C VT-3 TX-ISI-8 R2 X
1 FW-1-020-011-CS2s NOTE 1 R13 856RB t
a 4
e
DATE: 12/01/93 COMANCHE PEAK U31T 1 PACE:
28 INSERVICE INSPECTION
SUMMARY
FIRST INTERVAL, FIRST PERIOD, THIRD OUTAGE (93RF) 5 CLASS 2 COMPLETED COMPOWENTS s
ASME G
SEC. XI NE
SUMMARY
EXAMINATION AREA CATGY EXAM NRR0 REMARKS CUMBER IDENTIFICATION ITEM NO METH00 PRDCEDURE IIIM ** CALIBRATION BLOCK **
FEEDWATER 18-FW-1-020-1303-2 726300 TBX-2-2401-H7 F-C VT-3 TX-ISI-8 R2 X
FW-1-020-705-C52S NOTE 1 R30 852RB 726400 TBX-2-2401 H8 F-C Vf-3 TX-ISI 8 R2 X
FW-1-020-706-C52K NOTE 1 R13 856RB FEEDWATER 6-fV-1-098-1303-2 740500 TBX-2-2402-H26 F-C VT-3 TX-ISI 8 R2 X
FW-1-098-007-C62R NOTE 1 R30 B69RB 740600 TBX-2-2402 H27 F-C VT-3 TX*lSI-8 R2 X
RI IS ACCEPTABLE. REF. DNE FORM FW-1-098-008-C625 NOTE 1 93-1931.
R30 872RB 740700 TEX-2 2402-H30 F-C VT-3 TX-ISI-8 R2 X
FW-1-098-009-C62C NOTE 1 R30 872RB 74D800 TBX-2-2402 H29 F-C VT-3 TX-ISI-8 R2 X
RI IS ACCEPTABLE. REF. ONE FORM FW 1-D98-010-C62K NOTE 1 93-1930.
R30 872RB 740900 TBX-2-2402 H31 F-C VT-3 TX ISI-8 R2 X
FW-1-098 011-C62S NOTE 1 R30 872RB l
s DATE: 12/01/93 COMANCHE PEAK UNIT 1 PAGE:
29 INSERVICE INSPECTION
SUMMARY
FIR $T INTERVAL, FIRST PERIOD, THIRD OUTAGE (93RF)
CLASS 2 COMPLETED COMPONENTS s
t ASME G
SEC. XI NE
SUMMARY
EXAMINATION AREA CATGY EKAM NRR0 REMARKS NUMBER IDENTIFICATION ITEM Ho METHOD PROCEDURE IIIM ** CALIBRATION BLOCK **
FEEDWATER 6 FW-1-098-1303-2 9
741000 TBX 2-2402-H33 F-C VT-3 TX-ISI-8 R2 X
FW-1-098-012-C62K NOTE 1 R30 865RB 741100 TBX-2-2402-H32 F-C VT-3 TX-ISI-8 R2 X
FW-1-098-013-C62K NOTE 1 R30 866RB L
741200 TBX-2-2402-H35 F-C VT -3 TX-ISI-8 R2 X
FW 1 098-014-C625 NOTE 1 R3D 862RB r
/ ;41300 TBX-2-2402-H37 F-C VT-3 TX-ISI-8 R2 X
s.,s/
FW-1-098 015-C62K NOTE 1
[
i R30 865RB l
741400 TBX-2-2402-H36 F-C VT-3 TX-ISI-8 R2 X
FW-1-0?O-GII:-C62K NOTE 1 R30 863RB 1
741700 TBX-2 2402-H28 F-C VT-3 1X-ISI-8 R2 X
{
FW-1-D98 701-C62R NOTE 1 R30 872RB i
i FEEDWATER 6-FW-1-099-1303 2 l
742500 TBX-2 2102-H25 F-C VT-3 TX-ISI-8 R2 X
FW-1*D99-007-C62R NOTE 1 R13 861RB T.
l t
<e 1
1 b
DATE: 12/01/93 C0KANCHE PEAK UNIT 1 PAGE:
30 INSERVICE INSPECTION
SUMMARY
TIRST INTERVAL, FIRST PERIOD, THIRD OUTAGE (93RF)
'S CLASS 2 COMPLETED COMPONENTS g
ASME G
SEC. XI NE
SUMMARY
EKAMINATION AREA CATCY EXAM NRR0 REKARKS KUMBER IDENTIFICATION ITEM No METHOD PROCEDURE IIIM ** CALIBRATION BLOCK **
FEEDWATER 6-FW-1-100-1303-2 743400 TBX-2-2202-H48 F-C VT-3 TX-ISI-8 R2 X
FW-1-100-008-CS2$
NOTE 1 j
t R13 853RB FEEDWATER 6-FW-1-101-1303-2 744100 TBX-2-2302-H51 F-C VT-3 TX-ISI 8 R2 X
FW-1 101-005-C52R NOTE 1 R13 856RB
)
I 744200 TBX-2-2302-H52 F-C VT-3 TX-ISI-8 R2 X
FW-1-101-006-C52R WOTE 1 R13 856RB l
744300 TBX 2-2302-H50 F-C VT 3 TX-ISI-8 R2 X
FW-1-101-007-C52K NOTE 1 R13 853RB 744400 TBX-2-2302-H49 F-C VT 3 TX-ISI-8 R2 X
FW-1 101-008-CS2S NOTE 1 R13 853RB 744600 TBX-2-2302 H48 F-C VT-3 TX-ISI-8 R2 X
FW-1 101-010-C52K NOTE 1 R13 855RB MAIN STEAM 8-MS-1-223-1303-2 750300 TBX 2-2300-H16 F-C ~
VT-3 TX-ISI-8 R2 X
MS 1 223-001-ST2K NOTE 1 R109 885SB
DATER 12/01/93 COMANCHE PEAK UNIT 1 PAGE:
31 INSERVICE INSPECTION
SUMMARY
FIRST INTERVAL, F]RST PERIDO, THIRD OUTAGE (93RF)
CLASS 2 COMPLETED COMPONENTS J
ASME G
SEC. XI NE
SUMMARY
EKAMlWATION AREA CATGY EXAM NRR0 REMARKS CUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE I11M
- CAllBRATIDN BLOCK **
MAIN STEAM 8-MS-1-223-1303-2 75D400 TBX-2-2300 H15 FC VT-3 TX-ISI-8 R2 X
MS-1-223-002-$72K NOTE 1 R109 885SB MAIN STEAM 8-MS-1-240-1303-2 750500 TBX-2-2200-H14 F-C VT-3 TX-ISI-8 R2 X
MS-1-240-001-S72K NOTE 1 R109 885S8 750600 TBX-2-2200-H13 F-C VT-3 TX-ISI-8 R2 X
MS-1 240-002-$72K NOTE 1 R109 885SB j
MAIN STEAM 8-MS-1 -25 7-1303
- 2 750700 TBX-2-2100-H11 F-C VT 3 TX-ISI-8 R2 X
MS-1-257 001-S72K NOTE 1 R109 885SB 750800 TBX-2 2100 H10 F-C VT-3 TX IS!-8 R2 X
MS-1-257 002 ST2K NOTE 1 R109 885SB MAIN STEAM 8-MS-1 274 1303-2 750900 TBX-2-2400 H11 F-C VT-3 TX-ISI-8 R2 X
MS 1-274-001 S72K NOTE 1 R109 885SB
(
DATE: 12/01/93 COMANCHE PEAC UNIT 1 PAGE:
32 INSERVICE INSPECTION
SUMMARY
FIRST INTERVAL, FIRST PERIOD, THIRD OUTAGE (93RF)
CLASS 2 COMPLETED COMPONENTS ASME G
SEC. XI NE SUMMART EXAMINATION AREA CATGY EXAM NRR0 REMARKS CUMBER IDENTIFICATION ITEM No METHOD PROCEDURE I11M ** CALIBRATION BLOCK **
MAIN FTEAM B-MS-1-274 1303-2 751000 TBX-2-2400-H12 FC VT-3 TX-ISI-8 R2 X
MS-1-274 002-S72K NOTE 1 R109 885SB SAFETY INJECTION 18-SI-1-030-151R-2 759150 TBX-2-2579-H1 C-C PT TX-ISI-11 R4FC1 X SI-1-030-003-S32A C3.40 R70 802SB SAFETY INJECTION 12-St-1-031 151R-2 763150 TBX-2-2583-H14 C-C PT TX-ISI-11 R4FC1 X
8% NOT EXAMINED. REF. CODE CASE N-460.
O SI-1-031-709-A32R C3.40 R175 805AB I
SAFETY INJECTION 4-St.1-044-1501R-2 770150 TBX-2 2561 H21 C-C PT TX-ISI-11 R4FC1 X 9% NOT EXAMINED. REF. CODE CASE N-460.
SI-1-044-039-S42R C3.20 i
R77S 820SB SAFETY INJECTf0N 10-s!-1-095-2501R 2 787550 TBX-2 2530-H26 C-C PT TX-ISI-11 R4FC1 X 5% NOT EXAMINED. REF. CODE CASE N-460.
SI-1-095-003-542R C3.20 R77S 820SB SAFETY INJECTION 14-SI-1-196-151R-2 2
739250 TEX-2 2581-H4 C-C PT TX-ISI-11 R4FC1 X
SI 1 196-004-S32R C3.40 R70 79558
DATE: 12/u1/93 CMA%CHE PEAK UNIT 1 PAGE:
33 INSERVICE INSPECTION SUMPRRY FIRST INTERVAL, FIRST PERIOD, THIRD OUTAGE (93RF)
CLASS 2 COMPLETED COMPOWENTS ASME G
SEC. XI NE
SUMMARY
EKAMINATION AREA CATGY EXAM NRR0 REMARKS t' UMBER IDENTIFICATION ITEM No METHOD PROCEDURE IIIM
- CAllBRATION BLOCK **
)
I MAIN STEAM 32-MS-1-001-1303-2 794300 TBX-2-2100-MR1 F-B VT-3 TX-ISI-8 R2 X
1 CP1 MSMEMR-01 NOTE 1 l
R108 87758 l
MAIN STEAM 32-MS-1-002-1303-2 794400 TBx-2-2200-MR2 F-B VT 3 TX-ISI-8 R2 X
CP1-MSMEMR-02 NOTE 1 R108 8775B MAIN STEAM 32-MS-i-003-1303-2 1
794500 TBx-2-2300-MR3 F8 VT 3 TX-ISI-8 R2 X
RI IS ACCEPTABLE. REF. ONE FORM I
[
CP1-MSMEMR-03 NOTE 1 93-2047.
I t
R108 8775B MAIN STFAM 32-MS-1-004-1303-2 794600 TBX-2-2400-NR4 F-B VT-3 TX ISI-8 R2 X
RI IS ACCEPTABLE. REF. ONE FORM CP1 MSMEMR-04 NOTE 1 93 2054.
R108 877S8 5
I
DATE: 12/01/93 COMANCHE PEAK UNIT 1 PAGE:
34.
INSERVICE INSPECTION
SUMMARY
FIRST INTERVAL, FIRST PERIOD, THIRD OUTAGE (93RF)
CLASS 3 COMPLETED COMPONENTS ASME G
SEC. XI NE
SUMMARY
EXAMINATION AREA CATGY EXAM NRR0 REMARKS EUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE IIIM ** CALIBRATION BLOCK **
i AUXILARY FEE 0 WATER 4-AF-1-006-200 M 1
1 832200 F-B VT-3 TX ISI-8 R2 X
i AF-1-096-008-533R NOTE 1 RB2 809sB 832300 F-C VT 3 TX ISI-8 R2 X
AF.1-094-010-S33K NOTE 1 RB2 80958 i
832400 F-8 VT-3 TX-ISI-8 R2 X
AF-1-096 012 S33R NOTE 1 l
R82 80958 72450 DA VT 3 TX-ISI-8 R2 X
- d AF 1-096-012-S33R D1.20 RB2 80958 832500 FC VT-3 TX-ISI-8 R2 X
AF-1 096-013-S33K NOTE 1 R82 809SB f
832600 D-A VT-3 TX-ISI-8 R2 X
AF-1-096-013 $33K D1.20 i
R82 80938 832700 F-C VT-3 TX-ISI-8 R2 X
7 i
AF 1-096-014-$33R NOTE 1 RB2 809S8 I
i
1 DATE: 12/01/73 C0KANCHE PEAK UNIT 1 PAGE:
35 INSERVICE INSPECTION
SUMMARY
FIRST INTERVAL, FIRST PERIOD, THIRD OUTAGE (93RF) p'"'
CLASS 3 COMPLETED COMPONENTS
'!\\
ASME G
SEC. x!
NE
SUMMARY
EXAMINATION AREA CATGY EXAM NRR0 REKARKS NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE I1IM ** CALIBRATION BLOCK **
AUXILARY FEEDWATER 4-AF 1 096-2003-3 832800 F-C VT-3 TX-IS!-8 R2 x
AF-1-096-015 533K NOTE 1 i
RS2 809SB B32900 F-C VT-3 TX-!SI-8 R2 x
AF.1-096-016-S33R NOTE 1 RB2 80958 833000 F-B VT-3 TX-ISI-8 R2 x
AF-1 096-017-S33K WOTE 1 R82 80958
'33100 F-C VT-3 TX-ISI-8 R2 x
s/
AF-1-096-018 S33K NOTE 1 R82 80958 833200 F-B VT-3 Tx-ISI-8 R2 x
AF-1-096-020-S33K NOTE 1 R82 80958 i
831300 F-C VT-3 TX-ISI-8 R2 x
AF-1-096-021 533K WOTE 1 RB2 8095B 8334D0 F-C VT-3 TX IS! 8 R2 x
AF-1-096-023-S33R NOTE 1 R82 80958 l
i j
1 1
i DATE: 12/01/93 COMANCHE PEAK UNIT 1 PAGE:
36 INSERVICE INSPECTION
SUMMARY
FIRST INTERVAL, FIRST PERIOD, THIRD OUTAGE (93RF)
-'s CLASS 3 COMPLETED COMPONENTS N
i ASME G
SEC. XI NE
SUMMARY
EXAMINAfl0W AREA CATGY EXAM NRR0 REMARKS EUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE IIIM ** CALIBRATION BLOCK **
AUXILARY FEEDWATER 4-AF.1-096-2003-3 833500 F-C VT-3 TX-ISI-8 R2 X
AF-1-096-024-533R NOTE 1 RB2 80958 833600 F-C VT-3 TX-ISI-8 R2 X
AF-1-096-025-S33R NOTE 1 R82 80958 i
.[
833700 F-B VT-3 TX-IS!-8 R2 X
AF-1-096-026 S33R NOTE 1 RB2 809SB l
i
' 3800 F-B VT-3 TX-151-8 R2 X
l AF-1-096-027-533R NOTE 1 RB2 8095B 833900 F-B VT-3 TX-ISI 8 R2 X
AF-1-096-028-533R NOTE 1 i
RB2 80958 AUxf t ARY FEEDWATER 4-AF-1-097 2003-3 E
E36300 F-C VT-3 TX-ISI-8 R2 X
AF-1-097-003-533K NOTE 1 I
R82 808SB i
836400 F-B VT-3 TX-ISI 8 R2 X
AF-1 097-004-$33R NOTE 1 RB2 808SB t
(s 4
Y P
i
DATER 12/01/93 COMANCHE PEAK UNIT 1 PACE:
37 INSERVICE INSPECTION
SUMMARY
FIRST INTERVAL, FIRST PERIOD, THIRD OUTAGE (93RF)
CLASS 3 COMPLETED COMPONENTS g
-s AWE G
SEC. XI NE
SUMMARY
EXAMINATION AREA CATCY EXAM NRR0 REMARKS NUMBER IDENTIFICATION ITEM NO METHOD PRDCEDURE IIIM ** CALIBRATION BLOCK **
AuxitARY FEEDWATER 4-AF*1-097-2003-3 836500 F-C VT+3 TX-ISI-8 R2 X
AF-1-097-005 S33K NOTE 1 RS2 808SB s
836600 F-B VT-3 TX-ISI-8 R2 X
AF-1-097-006-S33R WOTE 1 RB2 808SB 836700 F-B VT-3 TX-151-8 R2 X
AF-1-097-007-S33A NOTE 1 RB2 808SB 756 75 0 D-A VT-3 TX-ISI-8 R2 X
AF-1-097-007-533A D1.20 RB2 8085B 1
836800 F-B VT-3 TX-ISI-8 R2 X
AF-1-097-008-S33R NOTE 1 RB2 808SB 836900 FB VT-3 TX-ISI-8 R2 X
AF 1-097-009-S33R NOTE 1 RB2 808ss 837000 F-C VT-3 TX-ISI-8 R2 X
AF-1-097-011-533R NOTE 1 RB2 808ss i
I i
i
DATE: 12/01/93 C0KANCHE PEAK UNIT 1 PSGE:
38 INSERVICE INSPECTION
SUMMARY
FIRST INTERVAL, FIRST PERIOD, THIRD OUTAGE (93RF)
/'~'N CLASS 3 COMPLETED COMPONENTS
~-,/
1 ASME G
SEC. XI NE
SUMMARY
EXAMINATION AREA CATCY EXAM NRR0 REMARKS WUMBER IDENTIFICATIDW ITEM NO METHOD PROCEDURE IIIM
- CALIBRAT10N BLOCK **
AUvilARY FEEDWATER 4-AF-1-098-2003-3 842100 F-C VT-3 TX-ISI-8 R2 x
AF-1-098 025-S33R NOTE 1 R82 80958 842200 F-C VT 3 TX-ISI-8 R2 X
AF-1-093-026-S33R NOTE 1 RB2 809sB B42300 F-C VT-3 TX-ISI-8 R2 x
AF-1-098-027-S33R NOTE 1 RB2 809SB
, ~~s
(
%2400 F-C VT-3 TX-ISI-8 R2 X
AF-1-098-028-S33R NOTE 1 RB2 809S8 842500 F-B VT-3 TX-IS!-8 R2 X
AF-1-098 029-S33R NOTE 1 RS2 809S8 843200 F-B VT-3 TX-ISI 8 R2 x-AF-1 D98-039-533A NOTE 1 RB2 80958 843250 D-A VT-3 TX-ISI-8 R2 x
AF-1-098-039-S33A D1.20 RB2 80958 1
rd"NN m
i
DATE: 12/01/93 C0KANCHE PEAK ONIT 1 PAGE:
39 INSERVICE INSPEC',lDN SUMHARY i
FIRST INTERVAL, FIRST PERIJO, THIRD OUTAGE (93RF)
O CLASS 3 COMPLETED COMPONENTS AME G
SEC. XI NE SUMKARY EXAMINAT!DN AREA CATGY EXAM NRR0 REMARKS NUMBER IDENTIFICATION ITEM No METHOD PROCEDURE I11M
- CAllBRATION BLOCK **
AUX 1tARY FEEDWATER 4-AF-1-098-2003 3 843300 F-C VT.3 TX.ls! 8 R2 X
AF-1-098 040-533R NOTE 1 RB2 80958 843400 F-B VT-3 TX-ISI-8 R2 X
AF-1-098-041-533R NOTE 1 R82 80958 B43500 F-B VT-3 TX-ISI-8 R2 X
AF-1-D98-D42-533R NOTE 1 RB2 80958
[
13600 F-C VT-3 TX-ISI-8 R2 X
\\s e#
AF.1-098-700 S33R NOTE 1 RS2 80958 AUX 1tARY FEEDWATER 4-AF-1-099-2003-3 343700 F-B VT-3 TX-ISI-8 R2 X
AF-1-099-001 S33R NOTE 1 R82 808SB 843800 F-B VT-3 TX.1SI-8 R2 X
AF-1-099-003-533R NOTE 1 R82 808S8 843900 F-B VT-3 TX.lSI-8 R2 X
AF-1-099-004-533R NOTE 1 5
R82 808SB r**r U
l
f DATE: 12/01/93 COMANCHE PEAK UNIT 1 PAGE:
40 INSERVICE INSPECTION SUMMART FIRST INTERVAL, FIRST PERIDO, THIRD DUTAGE (93RF) class 3 COMPLETED COMPONENTS ASME G
SEC. XI NE SUMMART EKAMINATION AREA CATGT EXAM NRR0 REMARKS NUMBER IDENTIFICATION ITEM No METHOD PROCEDURE IIIM
- CAllBRATION BLDCK**
AUXIL ARY FEEDWATER 4-AF-1-099-2003-3 B44000 F-B VT-3 TX-151-8 R2 X
i AF-1-099-005 s33R NOTE 1 RS2 808ss 844100 F-8 VT-3 TX-ISI-8 R2 X
AF 1-099 006-533R NOTE 1 RS2 B08sB B44200 F-C VT-3 TX-ISI-8 R2 X
r AF-1-099-007-s33K NOTE 1 RS2 8085B AUXILARY FFFDWATER 4-AF-1-100-2003-3 849400 F-B VT-3 TX-ISI-8 R2 X
AF-1 100 020-S33R NOTE 1 RB2 80958 B49500 F-B VT-3 TX-Is!-8 R2 X
AF-1-100-021-S33A NOTE 1 R82 809se B49550 D-A VT-3 TX-ISI-B R2 X
AF-1 100 021-s33A D1.20 R82 809sB AUXILARY FEEDWATER 4-AF-1 101-2003;}
850400 F-B VT-3 TX-ISI-8 R2 X
AF-1 101-005 s33R NOTE 1 RB2 808SB
DATE: 12/01/93 COMANCHE PEAK UNIT 1 PACE:
41 INSERVICE INSPECTION
SUMMARY
FIRST INTERVAL, FIRST PERIOD, THIRD OUTAGE (93RF)
CLASS 3 COMPLETED COMPONENTS ASME G
SEC. XI NE SUMMART EXAMINATION AREA CATGY EXAM NRR0 REMARKS C: UMBER IDENTIFICATION ITEM NO METN00 PROCEDURE IIIM ** CALIBRATION BLOCK **
AUXILARY FEEDWATER 4-AF-1-101-2003 3 850500 F-C VT-3 TX ISI 8 R2 X
AF-1-101-006-S3tR NOTE 1 RB2 808SB e
C50600 F-8 VT-3 TX-ISI-8 R2 X
AF-1 101-007 533R NOTE 1 R82 808SB 852900 F-B VT-3 TX-ISI-8 R2 X
AF-1-101-036 S33R NOTE 1 RB2 80858 AUXILARY FEEDWATER 4-AF-1-102-2003-3 853000 F-B VT-3 TX-ISI-8 R2 X
AF-1-102-001-533R NOTE 1 R82 80958 854200 F-B VT-3 TX-ISI-8 R2 X
AF 1 102-014-533R NOTE 1 RB2 80958 l
854300 F-B VT-3 TX-ISI-8 R2 X
AF 1-102-015-S33R NOTE 1 R82 80958
AF 1-102-016-S33R NOTE 1 R82 809S8 1
OT U
1 i
'DATE: 12/01/93 COMANCHE PEAK UNIT 1 PAGE:
42 INSERVICE INSPECTION
SUMMARY
FIRST INTERVAL, FIRST PERIOD, THIRD OUTAGE (93RF)
CLASS 3 COMPLETED COMPONENTS ASME G
SEC. XI NE
SUMMARY
EXAMINATIDN AREA CATGT EXAM NRR0 REMARKS NUMBER IDENTIFICATION ITEM No METHOD PROCEDURE IIIM
- CALIBRATIDW BLOCK **
AUXILARY FEEDWATER 4-AF-1-102-2003-3 5
654500 F-B VT-3 TX ISI-8 R2 X
AF-1 102-017-533R NOTE 1 RS2 809sB 854550 D-A VT-3 TX-ISI-8 R2 X
AT-1-102-017-S33R D1.20 R82 809SB 854600 FB VT-3 TX-ISI-8 R2 X
AF-1-102-018-$33R NOTE 1 RS2 809ss
35000 F8 VT-3 TX-ISI-8 R2 X
I AF-1-102-024 S33R NOTE 1 RS2 SO9ss 855100 F-B VT-3 TX ISI-8 R2 X
AF-1-102-025-533R NOTE 1 R82 809ss 855200 F-B vi-3 TX-ISI-8 R2 X
AF-1 102 026-S33R NOTE 1 RB2 809sB 855300 F-B VT-3 Tx-ISI-8 R2 x
AF-1-102 027 S33R NOTE 1 R82 80958 j
~
DATE 12/01/93 CDMANCHE PEAK UNIT 1 PAGE:
43 INSERVICE INSPECTION
SUMMARY
FIRST INTERVAL, FIRST PER100, THIRD OUTAGE (93RF)
CLASS 3 COMPLETED COMPONENTS ASME G
SEC. XI NE
SUMMARY
EXAMINATlDN AREA CATGY EXAM NRRD REMARKS NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURF.
1IIM ** CALIBRATION BLOCK **
AUXILARY FEEDWATER 4-AF-1 103-2003-3 657000 F-8 VT-3 TX-ISI 8 R2 X
AF-1 103 009-S33R NOTE 1 R82 808SB 857100 F-B VT-3 TX-lSt.8 R2 X
AF-1-103-010-S33R NOTE 1 R82 808SB 857200 F-8 VT-3 TX-ISI-8 R2 X
AF-1-103-011-533R NOTE 1 RB2 80BS8 7300 F-8 VT-3 TX-ISI-8 R2 X
AF-1-103-013-S33R NOTE 1 R82 808S8 857700 F-8 VT-3 TX ISI-8 R2 X
AF 1 103-024-S33A NOTE 1 R82 808SB 857750 D-A VT-3 TX ISI-8 R2 X
AF-1 103 024-533A 01.20 RB2 808S8 858600 F-8 VT-3 TX-IS: 8 R2 X
AF 1 103 035 S33R NOTE 1 R82 808S8 f
l DATE: 12/01/93 C0KANCHE PEAK U31T 1 PAGE:
44 INSERVICE INSPECilDN SUMHARY FIRST INTERVAL, FIRST PERIOD, THIRD OUTAGE (93RF)
CLASS 3 COMPLETED COMPONENTS ASME G
SEC. XI NE
SUMMARY
EXAMINATION AREA CATGY EXAM NRR0 REKARKS NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE IIIM ** CALIBRATION BLOCK **
aux!LARY FEEDWATER 4-AF-1-103-2003-3 858700 F-C VT-3 TX ISI-8 R2 X
AF 1-103-036-533R NOTE 1 R82 808S8 858300 F8 VT-3 TX-ISI-8 R2 X
AF.1 103 037 533R NOTE 1 R82 808SS B58700 F-8 VT 3 TX ISI 8 R2 X
AF.1-103 038-533R NOTE 1 R82 808ss
[
- 9000 F-B VT-3 Tx-ISI 8 R2 X
\\N- /
AF 1 103-039 $33R NOTE 1 R82 808SB 6
DIESEL GENERATOR AlixlLARY 42-00-1-071-153-3 923250 00-1-DG-051 D-B VT-3 TX-ISI 8 R2 X
DD-1-071-001.S63K D2.30 R99A B62DG 923450 DO-1 DG-020 D-B VT 3 TX-ISI 8 R2 X
DO 1 071 003 S63K D2.30 R99A B540G 923550 00-1 D0-020 DB VT-3 TX.ISI 8 R2 X
DO-1-071-004-$635 D2.40 R99A 8550G s
J
I DATE, 12/01/93 COMANCH" FEAX UNIT 1 PAGE:
45 INSERVICE INSPECTION SUMMART FIRST INTERVAL, FIRST PERIOD, THIRD OUTAGE (93RF) i
<~'
CLASS 3 CLdPLETED COMPONENTS 5
l l
ASME G
j SEC. XI NE SUMMART EXAMINATION AREA CATGY EXAM NRR0 REMARKS UUMBER IDENTIFICATION ITEM NO METHOD PRDCEDURE IIIM ** CALIBRATION BLOCK **
DIESEL GENERATOR AUXILARY 42-00-1-071-153-3 923650 00-1 DG-020 0-8 VT-3 TX-ISI-8 R2 X
DO 1-071-006-SS3R D2.20 R79A S45DG 923700 DO-1-DG-020 F.C VT-3 TX-ISI-8 R2 X
00-1-071-007-$53L NOTE 1 R85 842DG r
MAIN STEAM 16-MS-1-416-152-3 924600 FC VT-3 TX-ISI-8 R2 X
MS 1 416-012-S43R NOTE 1 RB2 813SB 924650 D-A VT 3 TX ISI-8 R2 X
MS 1-416-012-S43R D1.20 i
RB2 813SB 924700 F8 VT-3 TX-!SI 8 R2 X
MS-1-416-013-S43R WOTE 1 RB2 829SB SERVICE WATER 10 SV 1-102 150-3 935400 F-C VT-3 TX-ISI-8 L2 X
SW 1-102-005-343R NOTE 1 RS2 81358 935500 F-C VT 3 TX-ISI-8 R2 X
SW 1 102 007-S43R NOTE 1 R82 817SB
'\\
DATE: 12/0?/93 COMANCHE PEAK UNIT 1 PAGE:
46 INSERVICf. INSPECTION
SUMMARY
FIRST INTERVAL, FIRST PER100, THIRD Ol>TAGE (93RF) p CLASS 3 COMPLETED COMPONENTS
(
ASME G
SEC. XI NE
SUMMARY
EXAMINATION AREA CATCT EXAM NRR0 REMARKS inJMBER IDENTIFICATION ITEM NO METH00 PROCEDURE IIIN ** CALIBRATION BLOCK **
SERVICE VATER 10-SW-1-102-150-3 935600 F-C VT-3 TX-ISI-8 R2 X
SW-1-102-009-543K NOTE 1 R82 8195B 935700 FB VT-3 TX-ISI-5 R2 X
SW-1-102 010-543R NOTE 1 R82 824SB 1
1 935800 F-C VT-3 TX-ISI-8 R2 X
SW-1-102-012-5 '
NOTE 1 RB2 824SB l
p5900 F-C VT-3 TX-ISI-8 R2 X
\\/
SW-1 102 013 S43R NOTE 1 RS2 824SB 936000 F-C VT-3 TX-151-8 R2 X
SW-1-102-015-543R NOTE 1 RB2 82458 936100 F-C VT-3 TX-ISI-8 R2 X
SW-1-102-016-S43R NOTE 1 R62 824SB 936200 F-C VT-3 TX-ISI-8 R2 X
SW 1-102-017-543R NOTE 1 RS2 824SB
DATE: 12/01/93 COMANCHE PEAK UNIT 1 PAGE:
47 INSERVICE INSPECTION
SUMMARY
FIRST INTERVAL, FIRST PERIOD, THIRD OUTAGE (93RF)
CLASS 3 COMPLETED COMPONENTS U
ASME G
SEC. XI NE
SUMMARY
[xAMINATICd AREA CATGY EXAM NRR0 REMARKS CUMBER IDENTIFICATION ITEM No METHOD PROCEDURE IIIM ** CALIBRATION BLOCK **
I SERVICE WATER 10-SW-1-102-150-3 936300 7-C VT-3 Tx-ISI-8 R2 X
SW-1-102 019-$43R NOTE 1 RB2 824SB 936400 F-C VT 3 TX-ISI-8 L2 X
SW-1-102 022-S43R NOTE 1 R82 824SB 936500 F-C VT-3 TX ISI-8 R2 X
SW-1-102-023-S43R NOTE 1 RS2 824SB N6600 F-8 VT-3 TX-ISI-8 R2 X
SW-1-102-025-S43R NOTE 1 RB2 824SB 939600 F-B VT-3 Tx-ISI B R2 X
SW-1-102-720-S43A NOTE 1 RB2 824SB 939650 D-A VT-3 Tx-ISI-8 R2 X
SW-1-102-720-S43A D1.20
(
R82 824SB SERVICE WATER 10-SW-1-129-150-3 941300 F-B VT-3 Tx-ISI 8 R2 x
SW-1-129-021-$43R NOTE 1 RB2 819SB
I i
DATE: 12/01/93 C0HANCHE PEAK UNIT 1 PAGE:
48
)
INSERVICE INSPECTION
SUMMARY
-l FIRST INTERVAL, FIRS) PERIOD, THIRD OUTAGE (93RF)
CLASS 3 COMPLETED COMPONENTS s s
's s
ASME G
I SEC. XI NE
SUMMARY
EXAMINATION AREA CATGY EXAM NRR0 REKARKS NUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE IIIM
- CAllBRATION BLOCK'*
P SERVICE WATER 10-SW-1-129-150-3 941350 0A VT-3 TX-ISI-8 R2 X
SW-1-129-021-S43R D1.20 RS2 819sB 942200 F-B VT-3 TX-ISI-8 R2 X
SW-1-129 062-543R WOTE 1 RB2 824SB 942300 F-8 VT-3 TX-ISI-8 R2 X
SW-1-129 063-S43R NOTE 1 RB2 824SB i
/#~A2400 F-B VT-3 TX-ISI-8 R2 x
\\s_,//
SW-1 129-064 S43R NOTE 1 RB2 824SB i
942500 F-B VT-3 TX-ISI-8 R2 X
SW-1-129-065-543R NOTE 1 RB2 E24SB T
942600 F-B VT-3 TX-ISI-8 R2 X
SW-1-129-066-S43R WOTE 1 RS2 824SB i
942700 F-B VT-3 TX-ISI-8 R2 X
SW-1-129-067-543R WOTE 1 RB2 824S8 i
O f*%%
DATE: 12/01/93 COMANCHE PEAK UNIT 1 PAGE:
49 INSERVICE INSPECTION
SUMMARY
FIRST INTERVAL, FIRST PER100, THIRD OUTACE (93RF)
U%
/
CLASS 3 COMPLETED COMPONENTS ASME G
SEC. XI NE
SUMMARY
EXAMINATIDN AREA CATGY EXAM NRR0 REMARKS L* UMBER IDENTIFICATIDN ITEM NO METHOD PROCEDURE IIIM ** CALIBRATION BLDCK**
SERVICE WATER 10-SW-1-129-150-3 942800 F-B VT-3 TX-ISI-B R2 X
SW-1-129-068-S43R NOTE 1 RB2 824SB 942900 F-C VT-3 TX-ISI 8 R2 X
SW-1-129-069-$43K NOTE 1 RS2 823SB i
k 943000 F-C VT-3 TX-ISI-8 R2 X
SW-1-129-070-S43R NOTE 1 RB2 812S8 l'
15400 F-B VT-3 TX-ISt-8 R2 X
SW-1-129 720-S43A NOTE 1 RB2 824SB t
945450 DA VT-3 TX-ISI-8 R2 X
SW-1-129-720-S43A D1.20 R82 824SB 947000 F-C VT 3 TX-!SI-8 R2 X
SW-1-129-801-543R NOTE 1 RB2 824S0 SERVICE WATER 10-SW-1-132-150 3 948100 F-C VT-3 TX-ISI-8 R2 X
RI IS ACCEPTABLE. REF. DNE 93 2052.
SW-1-132-015-543R NOTE 1 RS2 824SB 1
r-w i
DATE: 12/01/93 COMANCHE PEAK UNIT 1 PACE:
50 INSERVICE INSPECTION
SUMMARY
FIRST INTERVAL, FIRST PERIDO, THIRD OUTACE (93RF) i
/"
CLASS 3 COMPLETED COMPONENTS ASME G
SEC. XI NE
SUMMARY
EXAMINATION AREA CATGY EKAM NRR0 REMARKS NUMBER IDENTIFICATION ITEM NO METH00 PROCEDURE IIIM
- CAllBRATION BLOCK **
l SERVICE WATER 10-SW-1-132-150-3 948200 F-C VT-3 TX-ISI-8 R2 X
R1 IS ACCEPTABLE. REF. ONE 93 2052.
SW-1-132-016-543R NOTE 1 RS2 824SB 948300 F-B VT-3 TX-ISI-8 R2 X
SW-1-132-017-S43R NOTE 1 RB2 824SB 948400 F-B VT-3 TX-ISI-8 R2 X
SW-1 132-018-543R NOTE 1 R82 824SB
[
- 3500 F-C VT-3 TX ISI-8 R2 X
SW-1-132-019-543R NOTE 1 PS2 824S8 948600 F-C VT-3 TX-ISI-8 R2 X
SW-1-132 020-$43R NOTE 1 i
RS2 824SB 948700 FC VT-3 TX-ISI-8 R2 X
SW-1-132-021-543R NOTE 1 4
RB2 824SB i
948800 F-C VT-3 TX-ISI 8 22 X
SV-1-132-022-$43R NOTE 1 R82 824SB s
DATE: -12/01/93 COMANCHE PEAK UNIT 1 PAGE:
51 INSERVICE INSPECTION
SUMMARY
FIRST INTERVAL, FIRST PERIOD, 1HIRD OUTAGE (93RF) y'"
CLASS 3 COMPLETED COMPONENTS
(
\\
ASME G
SEC. XI NE l
SUMMARY
EXAMlWATION AREA CATGY EKAM NRR0 REMARKS CUMBER IDENTIFICATION ITEM NO METHOD PROCEDURE IIIM ** CALIBRATION BLOCK **
SERVICE WATER 10 SW-1-132-150-3 948900 F-C VT-3 TX-ISI 8 R2 X
SW-1-132-023-S43R NOTE 1 R82 824SB 949000 F-C VI-3 TX-ISI-8 R2 X
RI 15 ACCEPTABLE. REF. DNE 93-2052.
SW 1-132-024-S43R NOTE 1 RS2 81958 P
949050 D-A VT 3 TX-ISI-8 R2 X
SW-1 132-024 543R D1.20 R82 819SB
'#0200 F-B VT-1 TX-ISI-8 R2 X
SW-1-132-058-S33R NOTE 1 RBS 805DG 950300 FC VT-3 TX-ISI-8 R2 X
SW-1 132 059 S43R NOTE 1 R85 814DG 95D400 eB VT-3 TX-IS!-8 R2 X
SW-1-132 060-S43R NOTE 1 RBS 8140G 950600 F-C VT-3 TX-ISI-8 R2 X
SW-1 132-D62 S43R NOTE 1 R82 824SB l
t 1
DATE: 12/01/93 COMANCHE PEAK UNIT 1 PAGE:
52 INSERVICE INSPECTION
SUMMARY
FIRST INTERVAL, FIRST PERIDO, THIRD OUTAGE (93RF) t CLASS 3 COMPLETED COMPONENTS ASME G
SEC. XI NE
SUMMARY
EKAMINATION AREA CATGY EXAM NRR0 REMARKS NUMBER IDENTIFICATIDW ITEM NO METHOD PROCEDURE IIIM
- CALIBRAT!DN BLOCK **
SERV!cE WATER 10 SW-1 132-150-3 i
950700 F-C VT-3 TX-ISI 8 R2 X
i SW-1 132-063-543R NOTE 1 RB2 824SB 950800 F.C VT-3 TX-ISI-8 R2 X
i SW-1-132-D64-543R NOTE 1 RS2 824SB 950900 F-r vi-3 TX-IS!-8 R2 X
SW 1 132-065-543R NOTE 1 RB2 824SB
- ~'N
/
151000 FB VT-3 TX !SI-8 R2 X
U SW-1-132-066-S43R WOTE 1 i
RB2 824SB 951100 F-C VT-3 TX-ISI 8 R2 X
SW 1 132-067.S43R NOTE 1 RS2 82458 i
951200 F-C VT-3 TX ISI-8 R2 X
I SW-1 132-D68 S43R NOTE 1 RB2 8245B 1
951300 FC VT-3 TX-ISI-B R2 X
SW 1-132-069-543R NOTE 1 R82 824SB 1
i I
(L 2
DATE: 12/01/93 COMANCHE PEAK UNIT 1 PACE:
53 INSERVICE INSPECTION
SUMMARY
FIRST INTERVAL, FIRST PERIOD, THIRD OUTAGE (93RF)
I r-'s CLASS 3 COMPLETED COMPONENTS l
f u.s ASME G
SEC. XI NE l
SUMMARY
EXAMINATIDH AREA CATCY EXAM NRRO REMARKS NUMBER IDENTIFICATIDN ITEM NO METHOD PRDCEDURE IIIM ** CALIBRATION BLDCK**
SERVICE WATER 10-SW-1-132-150-3 951400 F-C VT-3 TX-ISI-8 R2 X
SW-1 132-070-S43R NOTE 1 RB2 824SB r
951500 F-C VT-3 TX*IS!-8 R2 X
SW-1-132-071-S43R NOTE 1 RB2 811SB 953000 F-B VT-3 TX-ISI-8 R2 X
SW-1-132-720-$43A NOTE 1 R82 824SB
- $3050 DA VT-3 TX-ISI-8 R2 X
SW 1-132-720-S43A D1.20 RB2 824SB SERVICE WATER 10-SW 173-150-3 955500 F-C VT-3 TX-ISI-8 R2 X
SW-1 173-045-S43K NOTE 1 R85 814DG 955600 FC VT-3 TX-IS!-8 R2 X
SW-1-173-046-S43R NOTE 1 R85 821DG 955700 F-C VT-3 TX-ISI-B R2 X
SW 1-173-047-S43R NOTE 1 R85 821DG t
i DATE: 12/01/93 COMANCHE PEAK UNIT 1 PAGE:
54 INSERVICE INSPECTION
SUMMARY
FIRST INTERVAL, FIRST PERIOD, THIRD OUTAGE (93RF)
CLASS 3 COMPLETED COMPONENTS ASME G
SEC. XI NE
SUMMARY
EXAMINATION AREA CATGY EXAM NRR0 REMARKS NUMBER IDENTIFICATION ITEM No METHOD PROCEDURE IIIM ** CALIBRATION BLOCK **
SERVICE WATER 10 SV-1-173-150-3 955800 F8 VT-3 TX-ISI-8 R2 X
SW-1-173-048-543R NOTE 1 R85 819DG 955900 F-C VT 3 TX-ISI-8 R2 X
SW-1 -173-050- S43R NOTE 1 RB2 82458 956000 F-B VT-3 TX-ISI-8 R2 X
i SW-1-173-053-543R NOTE 1 I
RB2 824SB
- 6100 F-C VT-3 TX-ISI-8 R2 X
s s/
SW-1-173-054-S43R NOTE 1 R82 824SB I
956200 F-B VT-3 TX-ISI 8 R2 X
SW-1-173-055-S43R NOTE 1 R82 824SB 956300 F-C VT-3 TX-ISI-8 R2 X
SW-1 173-056-S43R NOTE 1 RB2 824SB 956400 F-B VT-3 TX-ISI-8 R2 X
t SW-1-173-057-543R NOTE 1 R82 824SB u
{
\\
i t
t
DATE: 12/01/93 CDMANCHE PEAK U3IT 1 PACE:
55 INSERVICE INSPECTION
SUMMARY
FIRST INTERVAL, FIRST PERIOD, THIRD OUTAGE (93RF) f
CLASS 3 COMPLETED COMPONENTS t
N.
ASME G
SEC. XI NE
SUMMARY
EKAMINATION AREA CATGY EKAM NRR0 REKARKS EUM?ER IDENTIFICATION ITEM NO METHOD PROCEDURE 1IIN ** CALIBRATION BLOCK **
$FRVICE WATER 10 5W-1-173-150-3 956500 F-C VT-3 TX-ISI-8 R2 x
SW-1-173-058 543R NOTE 1 RB2 824SB i
956600-F VT-3 Tx-ISI-8 R2 X
SW-1-173-060 S43R lJTE 1 R82 824SB 756700 F-C VT-3 TX-ISI-8 R2 x
SW-1-173 063-S43C NOTE 1 R82 82058 t
O'6800 F-8 VT-3 TX-Ist-8 R2 x
SW-1-173-064-S43R NOTE 1 RB2 81958 P
956900 F-C VT-3 TX-ISI-8 R2 x
i SW-1-173-D67-S43R NOTE 1 R85 819DG 958700 FB VT-3 Tx-ISI 8 R2 x
EW-1-173 720-S43A NOTE 1 RS2 824SB 958750 DA VT-3 TX !S!-8 R2 x
SW-1-173-720 S43A D1.20 R82 8245B l
i l
1 l
i J
-. _ ~
i DATE: 12/01/93 COMA 2CHE PEAK UNIT 1 PAGE:
56 f
INSERVICE INSPECil0N
SUMMARY
FIRST INTERVAL, FIRST PERIOD, THIRD OUTAGE (93RF) i CLASS 3 COMPLETED COMPONENTS ASME G
j SEC. XI NE
SUMMARY
EXAMINATION AREA CATGY EXAM NRR0 REKARKS I
NUMBER IDENTIFICAT10N ITEN NO METHOD PROCEDURL IIIM
- CAllBRATION BLDCK**
CHEMICAL & VOLUME CONTROL T9X CSAMLD-01 (CS-1-SB-13) 962285 CS-1-SB 013-HXS1 F-B VT-3 TX-ISI-8 R2 X
HORIZ LETDOWN HX01 SUPPORTS NOTE i (2)
R81 790$8 962286 CS-1-SB-013-HXWS-1 D-A VT-3 TX-ISI-8 R2 X
HOR 12 LETDOWN HX01 SUPPORTS D1.20 (2) L'LD ATT I
R81 790$8 l
l
)
i l
l 1
I l
i l
I I
i J
i
1 1
\\
i
)
i A
APPENDIX C
O O
RELIEF REQUEST
]
B-4 I
REVISION 1 A.
Item for which relief is requested:
TBX-1 -2100- 1 1IR, 12IR, 13IR, 14IR, 151R, 161R TBX-1-3100-1A, lA, 2A, 2B, 3A, 3B, 4A, 4B Pressurizer and steam generator (primary side)
Nozzle inner radius sections R
Item Code Class:
1 C
Examination requirement from which relief is requested:
ASME Section XI 1986 edition, no addenda.
The requirement for volumetric examination of the nozzle inside radius section for nozzles associated with the pressurizer and steam generators (primary side) as described in Table IWB-2500-1, Category B-D, Item Numbers 3.120 and B3.140.
O V
D.
Basis for relief:
Specialized examination techniques and the design and fabrication of nozzle specific calibration blocks are required to obtain the best results for volumetric examination of the referenced inside radius sections. To determine which nozzles warranted the development of these enhanced techniques and the research required for the design of calibration blocks, an evaluation of each nozzle was performed. In this evaluation the nozzle stress and usage factor as well as the potential for thermal shock was considered. Of the referenced nozzles only the pressurizer surge and spray nozzle contains stresses and associated usage factor close to the allowable. Limited access due to the close proximity of the pressurizer i
heater connections and the fact that the nozzle stresses are below the allowable limits, indicate that the enhanced examination methodology is not warranted for the surge line. It is therefore concluded that only the pressurizer spray be subjected to the required volumetric examination using enhanced techniques and nozzle specific calibration blocks to maximize coverage.
For the remaining pressurizer nozzles, (relief and safeties) as well as the integrally cast primary side steam generator nozzles, a best effort examination will be performed as described below.
Ob Page 1 of 2
RELIEF REQUEST
(""
B-4
(
REVISION 1 (cont.)
1 E.
Substitute examination:
A best effort volumetric examination of the subject exam items will be performed and documented on a case by case basis. Prior to the scheduled examination, engineering and an NDE Level III will utilize the latest industry information available to establish the techniques, equipment and calibrations that would best enable detection of discontinuities that would be detrimental to the integrity of the nozzle inner radius section of each specific component. The first occurrence of this situation was associated with the examination of the steam generator number 1 primary side nozzle inner radius sections (TBX-1-3100-1A. IB).
The report attached to this relief request documents the actual exam performed as well as the pre-outage planning related to the performance of this exam. A similar report will be included with the ASME XI IWA-6000 inservice inspection records corresponding with each of the outages that the remaining examinations are schedule in.
F.
Anticipated impact on the overall level of plant quality and safety:
O The referenced evaluation indicates that only the pressurizer spray line experiences conditions under which the integrity of the inner radius might be compromised. This examination will be performed with specialized calibration blocks and exam techniques. Performing a best effort volumetric examination on the remaining nozzles utilizing component specific examination techniques will not introduce any anticipated impact on the overall plant quality and safety.
I i
1 l
O Page 2 of 2 i
TBX-1-3100-1A TBX-1-3100-1B 11/17/93 Attachment Report for Relief Request No. B-4 Rev.1 U
CPSES UNIT #1 STEAM GENERATOR NOZZLE INNER RADIUS VOLUMETRIC EXAMINATION Backstround ASME,Section XI, IWB-2500 exam category B-D item no. B3.140 requires that steam generator (SG) primary side nozzle inner radius be volumetrically i
examined. CPSES requested relief from the examination requirements per Relief Request No. B-4. (Attachment 1). For the reasons discussed in the relief request and in this report, a full code required examination is not feasible. It was determined that a best effort examination should be performed in an attempt to comply with Code requirements.
Discussion It was determined thru contact with EPRI NDE Center that SG inner radius calibration blocks are not available. A SG channel head with a machined notch was located at Florida Power and Light (FP&L). TU and Westinghouse ISI
- personnel traveled to FP&L to perform a calibration on this part to be stored in the instrument memory for possible utilization at CPSES. Prior to leaving l
CPSES, reactor vessel calibration block TBX-RV-1, which has a notch at the i
anticipated inner radius thickness range, was used as a basic calibration block and the instrument settings stored in memory. (Attachment 2)
The FP&L SG channel head is similar in material product form and thickness; however, the outer surface contours are different as the FP&L head is from a three loop system and CPSES is a four loop system.
Various transducer sizes and frequencies were used. A 1" round,.75MHz,35 longitudinal wave transducer provided the best resolution. As can be seen in
', the noise level was high, apparently due to a fillet weld attaching a retaining ring to the head approximately 1.7" from the inner radius.
Due to the difference in the outer surface contour between the FP&L channel i
head and the CPSES channel head, the consensus among the participants was that monitoring the clad roll in the inner radius area would be more meaningful than utilizing the FP&L channel head as a calibration block.
1;pon returning to CPSES two Level II Westinghouse personnel and a TU Level III performed the examination on SG 1 inlet and outlet nozzle inner radius.
Calibration block TBX-RV-1 was used for initial calibration and the gain was increased so that the clad roll from the inner radius was approximately 10%
full screen height (FSH). Due to the uneven outer surface and changing outer radius contour, the gain was increased or decreased in order to maintain a 10% to 20% FSH clad roll. No reflectors were noted in excess of 50% FSH.
t
Conclusion The SG inner radius examination was conducted on a best effort basis. It was concluded that any discontinuities in the inner radius which could be detrimental to the integrity of SG would have been detected.
nA26 es Ragan R B.
E Level III Codes and Standards Engineering Supervisor O
1 l
l O
-m i
Attachrent 1 Relief Rsquact B-4 j
ltem for which Relief is Requested:
i Nozzle inner radii I
Code Class:
1 Examination Requirement (s):
Table:
IWB-2500-1 Category:
B-D Item No.:
B?.120, B3.140 Table IWB-2500-1, Category B-D, Item Number 3.120 and B3.140 require volumetric examination of the nozzle inside radius section for nozzles associated with the pressurizer and steam generators (primary side).
Basis for Relief:
Specialized techniques and nozzle specific calibration blocks are required to ensure meaningful results for volumetric examination of the referenced inside radius sections.
To determine which nozzles warranted the use of these enhanced techniques, an evaluation of each nozzle was performed.
In this evaluation the nozzle stress and usage factor as well as the potential for thermal shock was considered.
Of the referenced nozzles only the pressurizer surge and spray nozzles exhibit a potential for thermal shock and only the spray nozzle contains stresses and associated usage factor close to the allowable.
It is therefore concluded that only the pressurizer spray be subjected to the
~
required volumetric examination using enhanced tec hiques to maximize coverage.
Limited access due to the close proximity of the pressurizer heater connections and the fact that the nozzle stresses do not approach the allowable limits, indicate that the additional cost and time associated with the enhanced examination methodology is not warranted for the surge line.
For the remaining pressurizer nozzles, (relief and' O.
safeties) as well as the integrally cast primary side steam generator nozzles, the cost and additional exposure associated with volumetric examination do not produce a corresponding increase in reliability or safety.
Alternative Examination (s):
None Safety Impact:
The referenced evaluation indicates that only the pressurizer spray line experiences conditions under which the integrity of the inner radius might be compromised. Not performing volumetric examination on the remaining nozzles will not introduce any anticipated impact on the v e:rall pisnc :; :licy and safety.
Radiological Concerns:
Performance of fewer inner radius examinations will result in less exposure. Also, a sipificant number of manhours in radiation areas will be saved by not installing scaffolding, removing and reinstalling insulation and then removing de scaffolding.
r OV REJ 0%
77.6dB 2.000 in/DIV f
4hl 20:
~
I
~
011
~
no n_ n uh n o lo o :it,I Lu n:.4 fit e nc oul 3:
- 0. 50 i n. + = 7.74 in. += 11.0c in
(/
REJ 0%
w 80.7dB 1.992 in/DIV DELAY 0.000 in ZERO 21.35 us FILTER 1 Hit DAMPING 80 OHH5 GATE START 11.65 in ENERGY HIGH GATE WIDTH 3.187 in HALF WAVE +
E^TE LEVEL 44%
T/R N0DE VEL 0.1242 in/us J 35.0'/ 0.000in NEMORY SELECT + E 12 3 4 5 6 7 8 910 x = OCCVPIED +
xx O
{
O REJ 0%
. i.1._. 9.ae..._.
2.000 in4IV p
,., g 99 60 40 1
20
- .. i.
. t i
ikihAdlk nib J
U 3: 13.30 in. += 7.63 in.'a= 10.90 in i
O REJ 0'4 104.9dB 2.000 2n419 DELAY 0.000 in IERU 23.05us FILTER 1 l1Hz DhliPIllG 80 OHIE.
GHTE START 11.65 in E lERGY llIGil GATE.lJIDTH 3.188 in HtLF IJAVE +
GATE LEVEL 32%
T/R l10DE VEL 0.1242 in M,
4 35.0'/ 0.000in HtMARY 5 ELECT *.F 1 2 3 4 5 6 7 8 9 10 x - OCCUPIED +
xx O
1
- t ~
j
- r Equipment and Personnel Certifications 5
L I
s I
+
Ii f
?
!i I
L i
e l
t s
i 6
4 h
I i
- t r
J i
l 1
i 1
l i
d
.i l
1 s
d i
i
,~.,n
. ~~,
,,,,. - + _,
e
. -., ~,
c-
, ee
.. ~ - -,
e x-e.--
v e.muu22 i
NDE CERTIFICATION RECORD 1
Am.:
W moe/L w :
W. G. Halley UT Level II Educ.seon a. E.p....nc.;
i
- 1) Graduated South Allegheny HS, 1973
- 2) Performed UT in Level 11 capacity since 8/85 si........
1,....n. :
- 1) Westinghouse NDE TI, 80 hours9.259259e-4 days <br />0.0222 hours <br />1.322751e-4 weeks <br />3.044e-5 months <br /> trainina in UT I
/ $777 \\ /
GENERAL xwr.\\/
SPECIFIC xwrh/
PRACTICAL xwr.\\
8nYi 5/15 -
5/16/91 97.5 X.4 98 X.3 98 X.3 98 c...
....n c.........;
None s.m.... :
na m w in... o..:
E........ o...;
5/16/91 5/15/94 NSD Level III
/7 i
i '
Ja
)3
~
I
~
f l11l1
.r e
1 x
h 1
y
' s su s
is
/
- l l
= l i
h 1
!:a 1
=
.o a
5.
/. rl A
E
.J g.
R0
,s :g )
e s
.g J
o ks t
y cf
%8.]
4W E 4 !
g en y
s
- n ei
(
g l 8~h 5,
y t
EQt I'igs Q
a i ig ~J 6
Ej Hs xl!!*))*
W e
2c s>
li zl O
~
aga11 l
i sy.p Q
J c{1fyll e
yll!llll1l1 ll
/1
. jQ
'J s
A 2
x; 111
! i h *.
l
~
p;si:it ifil/My!jl.I!g*,9.
~
ir L
i w7
- p 1*1 i
r
~
O
~
1
~'
- ~ L._:. :L'
-l N2d 93TL 24 01 m
sa:ci ts si a=rs
NDE CERTIFICAT16N RECORD m;
8d.Wieo/ L.w.8 ;
G. A. Morini 192-40-4982 UT/ Level II E ouc...on & E mp.ee.n
- 1) Graduated Ambridge Area HS,1968
- 2) Performed UT in Level II capacity since 8/82 1
i Si.t. ment of Tr..neng:
- 1) United States Steel 80 hours9.259259e-4 days <br />0.0222 hours <br />1.322751e-4 weeks <br />3.044e-5 months <br /> training in UT W
- 2) Westinghouse NSID, 40 hours4.62963e-4 days <br />0.0111 hours <br />6.613757e-5 weeks <br />1.522e-5 months <br /> trainine in UT sizine and detection l
l i
[ oITY \\ [
xwT.k[
cenerni Soecific xwTb[
xwT.\\
Practien1 c
i 5/24191 5/28/91 100 x.4 86 x.3 98 x.3 95 c.....
...on o
.on:
None i
l 1
l l
i n.m.... :
None Sq.me
.. o..;
c..-..on o..:
O 5/24/91 5123/94 c.re,v. v2 b/
\\
NSD 'DE Level III i
i
'^
i II I
= s-1 al i
E I
13:
[
=
[g a s*
2-
!$ j.
II j i
l E j i
13
.t 6
}
.5
${$
- vd u
~
$1 Ub 'l I-
=I fe
- 4".
=
a=
8 T
o.
s!
ildia i
~
gs j
e Ei 1A
=
- Igg' ei
- ~
5.
.!d
$8
~
i i-i dl
(
~
1 11 19
~
i
! l Nj s
1
" i ji i I l i g 1 ap q h s.
fjj I.
$$ ! l l l
!no,j' i.
1.
I n!-
o I
Ta a 9aTsezzoetT c1 mIit:N2P_!1HI a4Aasm woes 9eisT cssT-Tc-ene
M'# ii :.. h s a f"1RIELECTRIG
\\
TOR MfORE,0K gyoy Hondestructive Examination
, Forsonnel Certification Summary Record Name:
James 0. Ragan SSN:
555-54-6532 This certification is in accordance with TUE Procedura NOA 1.16-3.01 Method:
Ultrasonic Testing 14,el: III Education
Background:
High School NDE and Associated training:
NA Dato completed:
NA Length of course:
NA NDE and Associated work axperience: Certified Level III in PT. MT. Irr. FT _
1 8/6/92 Rasult: Passed Yes Eye exmaination: Data 5 ven:
certification Examination:
Type Data completed:
Raw Score:
Weight:
Crade:
Exam:
Easic 2/12/90 93.89 0.3 28.16 Exam:
Methods 2/13/90 os ss 0.4 1A.??
S ecific 2/13/90 mo 0.3 30 P
Exam:
96.38 Compartito Crade:
\\
Remarks:
Certification to extend to 5 years in accordance with NOA 1.16-3.01.
Submitted &-Approved By:
I//N Date /J. C. 4'J_
./._, N NDE 1mvel III
/I-#
Data /4 /G72
/
u.h Approved By:
i ev
,, (
j Operations Quality Control j
,.9f..,j-(9 l q9
/'
Date of Certification:
il 10 4"L-
~
c.
2/12/95
\\ r;. i 2 " j' Date of Expiration:
NJ:01/01 08/22/90
COMANCHE PEAK STEAM ELECTRIC STATION
~-
GLEN. ROSE,_ TEXAS 76043 O
EYE EXAMINATION
.U
._.c
->((wW6 YfuTfr~s SSN: $ 6 Y $ 5 l- ( % C NAME:
Corrective Lenses
((YES
[ ] NO If YES, type used w [ M yeglasses [ ] Contact Lenses
[ ] Both
-+ uu cd h e Fne <, w,auly NEAR VISION ACUITY-JAEGER SCALE 1L fv/ A R
,v / a Both B 1
- 2. (( Uncorrected
[ ] Corrected
- 3. [ M asses (J-1)
[ ] Failed f.
FAR VISION ACUITY-SNELLEN SCALE
- 1. L tw / 4 R
fv /A Both Jo/;o CERTIFIED.
- 2. [ ] Uncorrected
(( Corrected WORKING COPY
,k g
- 3. [ d assed
[ ] Failed n
(20/30 or Better)
--i
, aff g
left TU ELECTRIC
@ TRAMMG
~
COLOR VISION-ISHIHARA (24 Plate Edition)
- 1. Number of Plates Tested
/7 Number Correctly Read
/7
- 2. [
ssed (13 or more of the first 15 plates)
[ ] Failed i
Name of Examiner:
L, [
_ / /fL Date of Examination: 8/f/RT Title of Examiner:
t en,
8 p ear
.i
(<
FOR QA TRAINING USE ONLY
\\
DATE:
Y 5' 73 REVIEWED BY-e A1.16/03 06/15/90 0
t
ULTRASONIC EVALUATION REPORT FORM "TUELECTRIC cru or i
i tculP stRiat uutnetn
/]
tvAtuADON /Cfg/gz g 377,q D
M.T W ON EVAWAT M gg, l PROCEDURE N04fpp 4 ggy 7 t0UIP CONTROL N0 CouPtANT
- 6 Vr, <2 n a l MM IMM /r,l,,in's l
g Lt il<qei ff l TaANSOUCIR !!R NO gg f hf,h l 512t ;,p l rgia' 5'6 O
HORIZCNTAI, LDfEA11TT VERTICAL LIXEARIT!
l l
l l
l l
l l/ f II I I i i
/ /9! I io 1 I i1 I l
/ '/ -/
i l
l l
l l
l l/ / /l So j
i j / '/
l l
l l
l l/l/ /
I '
I I '/ /
80 e
l l
l l
l// /l
/ //
5' l
l l
l/I/ /l l
5"
'#7 6
a ii
///
l l
l[i((!
l l
l jso
/jf i
5 I
I//7I I
I 2 :a M/
5
'// /
l l
l l
l l'O
/.//
l 1
3,/f /
l l
t I // /
2 / /I i
l l
. / /,
x 30
/ / /'
o to 20 so 40 so so 70 so so too
/./ /"
Postra cr sma on svtIP nAct.
/
/'/
Practxt rua scAu
/- / /
I i
'O
/
/
I
/
/,
t1
\\
\\
i i
I sAct sasaus sacs. smaus em.iPosrT.lem.Pos:T.i g
q g
i i o
., g i
"* ""ca" N 8c"'
2 l /
' 7 i (p 3
I t a ;
')
scourm ursawT 4
1 4 s 1 2 MA-Mg NA NB 3
!4
'O 4
1 0 o 11 ( 1 so 12 5 i
H 10 i
so t g 4o } 79
, g, so 4o li so I,4 To 'i "4 6 20 i C) s m.
en s s.
AMP.
so
-l 3g io } 4 i
AMP.
CHG.
AMP.
LIP 1tTs 805 l-6" l "*' / >
l Egotpoest meets or esseems performanse charactertsstes ragstre4 by NQA 3.09-8.03.
805 l -12 4 l
( (,
l16-24 b
+3%
i *12 2 i Qg$
I 64-96 1
.g gg g,- -
- f..
l 0 AAAw (s
3 g
,,4 g,g, y
l Transducer Description Series S/U N$
b A
B
- uency *) b MHz Size !'
yle,b Connector m
E Contact I=morsion Nonfocused I
~
100mV M/ a 0ipd3s 6~
TRACE 1
1 s
... 4.
Water Path Spherical
'#' ', q 'i i1 i1 - '
I 11 QLD
[
I C
Cylindrical THACE Target i
.._{.
i Relative Sensitivity dB Energy Setting __
Impedance CE f
-h' g
~
Peak or Center Frequency
- MHz g
Inspector Date s
C D
E F
"""" l Testing Procedure i
The real time waveform shown in the photo above is the first return echo from a reflector j
selected with respect to transducer type. All contact (wearplate) transducers are tested on a flat eteel (4340) plate while epoxy-faced shear wave transducers are tested on a flat polymer F ck.
Dual contact transducers are tested on a flat polymer block unless otherwise
.ified. Delay fingertip removable (Style DFR) transducers are tested off of the tip of the s ay line. Nonfocused imersion transducers are tested in water over a flat steel plate usin a water path as.specified above. Focused immersion transducers are tested the same as i
l nonfocused transducers except that the water path used is equal to the actual focal length.
Using an AER0 TECH Ultrasonic Transducer Analy:ce, Model UTA-4, and a Tektronix 7L12 frequency spectrum analyzer in a 7704A Mainfr:me, the real time waveform, UTA-4 gate signal.
l and the frequency spectrum of the gated signal are simultaneously displayed and photographed.
]
Using the linear attenuator in the UTA-4 receiver, the amplitude of the real time waveform is adjusted to a six centimeter amplitude ( 1 dB) on the CRT. With the vertical calibration of Trace II fixed at 100 millivolts per division, the amount of attenuation used provides a l
relative sensitivity rating for all transducers certified by Krautkramer Branson.
Feal Time Waveform - Trace II Screen writing figures A and F provide the vertical and horizontal screen calibration respectively for Trace II.
Gate Marker - Trace I 4
Screen writing figure C provides the vertical amplitude of the gate marker and is an inconsequential figure. The horizontal calibration for Trace I is the same as that for Trace II.
The portion of Trace II that falls within the gate time period is the signal fed to the frequency spectrum analyzer.
Frecuenev Spectrum - Trace III Screen writing figure E provides the horizontal calibration for Trace III.
Figures B and
'ow the spectrum analyzer's attenuator and resolution settings respectively.
KEAUTKRAMER BRANSON P. O. Box 350 Lewistown, PA 17044
1 Transducer Description
.B l
Series S/N A
.O
~
7,uency MHz Size le Connector TEACE
[P"""""
f j
. Contact I:::mersion Nonfocused I
i l
Water Fath
' Spherical ii; Target Cylindrical TRACE
,~
i
/
1.
Relativo Sensitivity dB f
Energy Setting I=pedance CE f*'~-
Peak cr Center Frequency.
MH:
g g
i Inspector Date l
l l
C D
E F
~
Testinr. Procedure The real ti=e wavefor= shown in the photo above is the first return echo from a reflector i
selected with respect to transducer type. All contact (wearplate) transducers are tested on a flat steel (4340) plate while epoxy-faced shear wave transducers are tested on a flat polymer I
block. Dual contact transducers are tested on a flat polymer block unless otherwise ified. Delay fingertip removable (Style DFR) transducers are tested off of the tip of the ay line. Nonfocused imersion transducers are tested in water over a flat steel plate usin a water path as specified above. Focused imersion transducers are tested the same as I
nonfocused transducers except that the water path used is equal to the actual focal lansth.
l l
Using an AEROTECH Ultrasonic Transducer Analyzer, Model UTA-4, and a Tektronix 7L12 i
frequency spectrum analyzer in a 7704A Mainframe, the real time waveform, UTA-4 gate signal, I
and the frequency spectrum of the gated signal are simultaneously displayed and photographed.
)
Using the linear attenuator in the UTA-4 receiver, the amplitude of the real time waveform is
)
adjusted to a six centimeter a=plitude ( 1 dB) on the CRT. With the vertical calibration of i
Trace II fixed at 100 millivcits per division, the amount of attenuation used provides a relative sensitivity rating for all transducers certified by Krautkramer Branson.
l Real Time Wavefc m
" race II 1
l Screen vriting fiSures A and' F provide the vertical and horizontal screen calibration l
respectively for Trace II.
Cate Marker - Trace I Screen writing figure C provides the vertical a=plitude of the gate marker and is an incmsequential figure. The horizontal calibration for Trace I is the same as that for Trace f
11.
The portion of Irace II that falls within the gate time period is the signal fed to the Q guency spectrum analy:er.
4
)
I Precuenev Seectrum - Trace III 1
l Screen writing figure E provides the horizontal calibration for Trace III.
Figures B and
-how the spectrum analyr-r's attenuator and resolution settings resp 3ctively.
nAUTKEAMER BRANSON P. O. Box 350 i
Lewistown, PA 17044 I
IRANCH OFFICES:
International Testina Laharatories, Inc.
s. = - =. ms c~. -.
Phi!edilphia Pynsylv:nia
%al %, J C.
la., En,i ~
Weighers, Samplers and Assuyers
(
578-582 M ARKET STREET N EW A RX. N. J. 07103 Paonissa tapti see-am 1
REFORT OF TEST No.
559521 DATE Januarv 2, 1991 Echo Ultrasound From R.D. #2, Box 118 l
Keedsville, Penna. 17034-9772 f
PUPCHASE OPWER _N_O_. :
36076 SJK Sy PLE,
- Ultragel II, Batch 9092 TEST SPECS.
RESULTS
- ,ULTRAGEL II 1.
Sulfur 1.5 ppm 2.
Halogens :
14.1 ppm l
I,:.hrtin M. Sackoff, do hereby certify that the above is true and correct.
Se rn to and subscribed before me tM s 2nd day of January,,' 1991..
3.
,,z. /. s W e.,. 2
- Iy Notary Public Commission,dxpires To 14, 1994, Augt:st Echo Ultrasound Reedsville, Penna. 17084-9772 m Lb.Lrr of ik Ias-r
' Tatias h Iss.
INTERNATIONAL TESTING LABORATORIES. INC.
th,mp.c: i. ib. =rvic= ches.d for her.n, h.11 in event saceed the ramment af tbs invence.
g f
Our suports pertsen to abe sample seated only. Informarian
%'[ p',/f.,8 gg.ej, p
f contaanad beren is one to be reproduced ascept with our j
- n u
. g,;,
t 7Qu International Testine I.sharaturies, Inc.
wy f A;,c;,- _:
Weighers, Samplers and Assayers O
578 552 MANKET STREET i
NEWARK]. J. Of t es poemas seesa son.orys.w
{
REFORT OF ASSAY i
. N O. 5 6.2.4 2 9 DAVeb. 21, if 31 Ultragel II Our essey of ties maaple of TEXAS UTILITIES ELECTRIC y,
Echo Ultrasound P0f S0016921756 M:rk:d:
Batch 99092 Spes. ASTH-D-512 submitted to P.O. #36731 - 8JK end us,sliow 4
r E
a.
l
'f Tater Leachable chlorides 47 ppa Fluoride 0.64 ppa I, Martin M. Backoff, Executive Director'of Laboratories, do hereby certify that the above is true and correct.
~
9 l
- To Beho Ultrasound l
Reedsville, P.'A.
lNTERNATIONAL TESTING LABORATORIES, INC.
I i
t admit of e. I ews.sised '.'oeins,es.6.rse dm.1.s. visk se,em = ehe ff 1
enarpus ser harina, ames en se e sesseneitsassenset er h
/
neeru pensim = ehr==*le maand emit Inf==d== w h===
fy
" b' - * ' ' '"'" M " N He tin H. Smokeif, PS.,D
]
5 e
w
1 0
APPLIED TECHNICAL SERVICES, INCORPORATED i
i
.tlanta Indn=estal Detw. Merletta.P.corgte 300M * (404)(131400 y'o'-...
i..._
CHEMICAL TEST REPORT Ref.
C43225-3 Date September 20,1992 Page 1 of I
i Customes: _ Echo Ultrasount R. D. Box 118. Reedsville Pennsvivania 17084:2772 Attention Scott Waltert j,
Purchase Order #:
45247.SJK Pan #/Name: Ultracel II(Batch 093051)
Mater lat hesignation: Ultrabnic Cqpplant l,
I
,j, Special dequirement: N/A I.ab Comment-Analv7ed by GCP)J1omic emission. electrometric. wet chemical ggchniaues j,,
l i1..
Test Results I
Composition: (Pans mer Million) i Identification cij
_L. _
(1)l Allof or Sped. Weq. (1)
.i _...
.Od 11 l,
17 v
(Batch D9105 l}
I Analysis Guidelin.e_g a
ASTM-D512 89 i
L.-..
_=-
ASTM-C871-84 l
.. * *ust trEM a * * *
.L.
,i I
..,[.
(1) 5N871/D512 (Leachable Chlodde)
W M.Katter Prepared by '
/
Senior Chertist
~
Approved by 88-p#
._f E. Rogcr3 V
Manager i
o b
L l
o d-/
.saox*
l biy Pasc. Coth Crumtt.Geor0 s f
j Commep.:venrm unech rp i=7
APPLIED TECHNICAL SERVICES, INCORPORATED I
so 4,L.
eimes.: ortve. Mertraa.Deerpo m.(oon4u.34se CHEMICAL TEST REPORT Ref.
C432:5 1 Date September 20,1992 Page 1 of 1
i Customer _ Echo Ultrasoun).A D Box 118_ Reedsville Pennsvivania__17084 9772.
Attention Scott Walters Purchase Order #:
45247 SIK Part #/Name' _ Ultracel II(Batch 093051)
Material. Designation:.IJlpdnic Couolant I
Special Requirement: N/At I.ab Comment Anai.yzed bv'(ICP) atomic __emissiort electrometrie wer chemicaljechnianes.___.... _,,
Test Results Composition: (Parts per Million)
Identi$ cation Sl C1 Allo) or i
Spec. Rcq. (1)
(1)
(2) i..
3-15
(>r.1 gel 11 ll (Ratch Otto $ l}
,; ]
Anahasis Guidelines l
4...-
ASTM.D129 64 TIO
.A 9
ASTM-D808 91 w
i l
ASTM-DS12 89
....us T rTEM* = = = 3 i
.i..._
(1) ASTM D129/ICP.AE(TotalSulfur)
(2) AS*Thi D808/DS11Hg h0 )2 3
Method (Ts:il Chlorine) 47
. Xf & % -
1
/
W. M. _Katly Prepared by Senior Chemi.st O.
Approved by
_,A E. Rogcry Manager 2
r uy p h4 l
, c_. _ m...,_,.
RELIEF REQUEST B-7 A.
Item for which relief is requested:
TBX-1 -3100 1 TBX-1-3100 1 TBX-1-3100 1 TBX-1-3100 1 Steam generator tubesheet-to-channel head welds R
item Code Class:
I C.
Examination requirement from which relief is requested:
ASME Section XI 1986 edition, no addenda.
The requirement for volumetric examination of 100% of each of the steam generator tubesheet-to-channel head welds as described in Table IWB-2500-1. Examination Category B-B, Item No. B2.40.
D.
Basis for relief:
Interference from the steam generator tube sheet flange conflguration, welded insulation support pads and a welded component name tag preclude ultrasonic examination of 31% of the volume described in Fig.
IWB-2500-6 as applied to this weld on each of the four steam generators.
See pages 2 thru 4 for an example of the typical configuration obtained from the examination of TBX-1-3100-1-1.
E.
Substitute examinations:
None - however manufacturers shop volumetric exam records are available in permanent plant files.
F.
Anticipated impact on the overall level of plant quality and safety:
l None 1
i i
i O
Page 1 of 4 I
Relies Request mo.B-7 PaSe 2.4 4 o
g$*
8 M
Z o
. f,~~
{
b.N I r-A x s (cAted is. feptreste-ci s g.,
! 1.p SC
-4 4'g 4 l f-7
- a. I o5 W >
/ "19 '
W
- ~
W F1
~
H b
2 J M d5 U W 3C M m< 8 2
3 1 Ma R a
Ho Za l
=
i X
f X
g a ( V:
~
l a
nN E m b
O o
>~ tn U
l d
a e E
W Ms e
-W
- O U$
C N
Ms o
i
.e g<
r a
< a n W W N b
g M
~
U f W i
O A a
D W i
f" $$ $$ $@
b O 1
g g M h
O U M M D.
O y
W \\
J C:3 P-7 A
@Q $y $$ $$
. L.
v n
N N
m
- g. f A 74 ?A ??
=n 3
fh.Yh Yh Yh 2W l
W W
d a d..W tl
-. a ba da 2
i i
e 1
a--
Ed Ed Ed Ed s.
e i
em e.s one S
N A
A l
O N
r b-d 3
m I
Y b
M o
M W
x F-Q.
O Q.
Z
Relie f Re< gest no, B pg 3 o-f' 4.
WESTINGHOUSE NUCLEAR SERVICE DIVISION j
INSPECTION SERV!CES LIMITATlON TO EXAMINATION PLANT ( O M AN M II AK UNIT -
l-00 bu. I SKETCH SYST/ COMP -EAM C N 0. L A 5 0 T 3 PROCEDURE TV - IS l-210 Oc v. 2 maw k II* b'3 3
/
LE'vE L g blYI['
EXAMINER IM TE RE LATED TO: ts/T N P/T M/T V/T ITEMIS):
DOU
'~
PROVIDE GENERAL INFORMATION TO DESCRIBE APPROXIMATE SIZE, LOCATION AND TYPE OF LIMITATION.
O ' T4 F. i s /t. o F c
Cou, Leg mnHuny
, E SI o t F L A N G ir s,
%o" G
O
\\ lDeLd CI(
_ %_ y N
N
- 6. o
6.o" N
@ b@ @ \\,@@@@
N N
)
SI O E D %. Yn'
@ 2.s% 2.s" ru svi.w.~
6.s~1 s.s " x..o.
Ge'4eRJrlos. EutpeMS pg gqu g g.g g,.
TA3. Ja" Fiton o' 64 5" Aps,.T 360' f
atttua I krald P-'A *'* "E Abna weld O
fyog.y Z0.19l of fegu:re llol van Her Ex-~;ue Daa n The Above. Du;t.hoo.c e.
4 c4 4.
Rehef Resuest wo, e, -7 peee WESTINGHOUSE NUCLEAR SERVICE DIVISION INSPECTION SERVICES p
LIMITATION TO EXAMINATION PEAK 1
00 b_te.1 PLANT C otMNC H tt-unit SKETCH SYST/ COMP ohm NOkAY lS QI PROCEDURE
,l 1-MO e U. 3 b#
!~
3 EXAMINER Of W
I uchun f" ATE b
RELATED TO: U/T P/T M/T V/T ITEM (S):
DC LE I~i PROVIDE GENERAL INFORMATION TO DESCRIBE APPROXIMATE SIZE, LOCATION AND TYPE OF LIMITATION.
I FLAN 3c
(
T use nu_t i_4 l' O.
O b a, m
__c
)
o O.10. 9 /o gol %;n weu i-t 4I 10 9 */o 901 e.tarrugen 6 O' 3 i */o na Emus.n
~~
s c
0 0 Itt.usTanTive Out.y i
O C
ya
RELIEF REQUEST O
A.
Item for which relief is requested:
TBX-2-2530-29 TBX-2-2530-30 Circumferential Piping Welds R
Item Code Class:
2 C
Examination requirement from which relief is requested:
ASME Section XI 1986 edition, no addenda.
The requirement for volumetric examination of 100% of the weld length as described in Table IWC-2500-1, Examination Category C-F-1, Item No.
C5.11.
D.
Basis for relief:
O The specific examination area geometry of these pipe to valve welds precludes the complete ultrasonic examination of the volume required by Fig. IWC-2500-7. Approximately 15% of the exam volume for weld TBX 2530-29 and 20% of the exam volume for weld TBX-2-2530-30 did not receive the full code required coverage, j
Best effort examinations consisting of two separate base metal angle shear and longitudinal waves were performed. Full circumferential scan coverage was obtained for both welds. Axial scan coverage was achieved in at least 1 beam path direction with 2 beam angles for the entire exam volume of both welds (see pages 2 and 3).
There were no recordable indications identifled by the best effort volumetric exam or by the required surface exam performed.
E.
Substitute examinations:
None
~
F.
Anticipated impact on the overall level of plant quality and safety:
None i
)
O+ng Page 1 of 3 j
Reger Repest m. c-a m e 2 4 3.
WESTINGHOUSE NUCLEAR SERVICE DIVISION INSPECTION SERVICES N]
LIMITATION TO EXAMINATION PLANT $0NAW ON E l5AW UNlT WO f
$ KETCH T8X*%*A530 WA Y. f sYSTICOMP 8/5 ANN PROCEDURE YA *l.S /* E 0 7 AEY 2 EXAMINER DATE
/d -/8 - 98 L VL L D RE LATED TO: U/T M P/T M/T V/T ITEM (S):
W8M #29 PROVIDE GENERAL INFORMATION TO DESCRIBE APPROXIMATE SIZE. LOCATION AND TYPE OF LIMITATION.
f 7e* RL HS, o
V Alve.
1 45' 45 3 G'.a'
\\
\\
r e pc
_j _
s ~.
i F
t.5" % c/* sffGWK6D GXAM/N47/CN VoltJM6 Mor CaerKK6D /M 74dC 3 RAM
\\
/Arx Dserc7/oNs.
/00 %
C/' AEGwCE.o Volt /NF Ces/ftfD /W Calf BE.4N AeroY O/AfC7/oM.
Wirw ruso 8sxx.4W6Les (ve') i (7c'e+.)
O
%0 $ cl\\
bN
hiie2 Repest no. c-a ease 343.
WESTINGHOUSE NUCLEAR SERV!CE DIVISION INSPECTION SERVICES LIMITATION TO EXAMINATION
-i YSA~ 2
- 50-
$2Y Y PLANT ddMAA/ OWE ff4W UNgT YO /
SKETCH S/S YNO PROCEDURE D= /S/~ S Q L S[lf %
SYSTICOMP
/O* /3
- 93 b
OATE EX AMINE R um7 a
RELATED TO: U/T I P/T M/T V/T ITEMIS):
VELA Md l
PROVIDE GENERAL INFORMATION TO DESCRIBE APPROXIMATE SIZE, LOCATION AND TYPE OF LIMITATION.
6,,+ was W U" 43.L"ru y;f n, l
43.I, h f V e-j 7cfB L l[
45' i
O
/
Y A L we.
Pit' 5 SWe 19.L I
i k
A0 % Cf Af$U/ Afb EK' AN/W4/~/cM Volg/MS Wo ?" CorcKso /k T*k/d 864M i
os ra oix-cr ca.
/00 % of AEqu/tfD Vo4cNE Correro /d eat gran Pgrx &xccnoAl Wsrn 7'wo BesN MA/64c.s-fyg,g e) ( (7e*g,s,)
O aorr As tdes/v n
a v
4
+
n
O APPENDIX D
1 O
t
'l
.)
I O
1
OWNER'S REPORT OF NIS-2 NUMBERS 3
NIS-2 NUMBER NIS-2 NUMBER 1AF93-015 1MS93-012 1AF93-016 1MS93-013 i
1AF93-017 1MS94-001 1AF94-001 1MS94-002 1AF94-002 1RC93-011 1AF94-003 1RC93-012 1AF94-004 1RC94-001 1CA94-001 ISF94-001 1CC93-010 ISI94-001 ICC93-011 1SI94-002 1CC93-012 ISW93-002 I
1CC93-013 1SW93-005 1CC94-001 1CC94-002 1CS94-001 1CS94-002 1CS94-003 1CT93-009 1CT93-010 1CT93-011 i
^
1CT93-012 1CT94-001 i
^l 1DO94-001 1FW93-015 1FW93-016 i
(
t i
CPSES NIS-2 Report No.
1AF93-015 F0*H NIS 2 OWNER'S REPORT OF REPAIR C2 REPLACEMENT As Required by the Provisions of ASME Ccde section XI 1.
Owner TV Electrie Date Nov 21, 1993
/
(Name)
P.O. Box 1002. Glen Rose. TX 76043 Sheet 1
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56. 5 miles North of Glen Rose, Texas
$1A-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC (Name)
Type Code Symbol Sta@
N/A P.O. BOX 1002 GLEN ROSE, TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4.
Identification of System Auxiliary Feedwater Reference N 5 eAF-1-1616 5.
(a) Applicable Construction Code See !!!
19 74 Edition, WINTER 74 Addenda, Code Cases N/A (b) Applicable Edition of Section XI utilized for Repairs or Replacements - 1986, & Addenda, Code Cases N/A 6.
Identification of Components Repaired or Replaced, and Replacement Components
- Repaired, Manufacturer's Name Nat'l
- Replaced, ASME Code and Board Other Year or Sta@ed Name of Component Serial Number No.
Identification Built Replacement (Yes or No)
(See pages 2 thru 2 attached) 7.
Description of Work See Attached O
8.
Tests Conducted:
Hydrostatic Pnetsnatic Nominal Operating Pressure other N/A Pressure N/A osi Test Te@.
N/A
'T 9.
Remarks VALVE IS ASME !!! CODE CLASS 2.
(Applicable Manufacturer's Data Reports to be attached)
CERTIFICATION OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR conforms to the rules of the ASME Code,Section XI.
repair or replacement Type Code syntol Sta g N/A Certificate of Authorization No.
N/A Expiration Date N/A b~!
[
/ Supervisor Mech. Codes & Standards Date Si
/ d i/S ' Oi4nef or owner's Designee, Title 19
/
CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holdine a valid comission issued by the National Board of, Boller and Pressure Vessel Inspectors and the State or Provinca :..
Texas and employed by Hartford Steam Boiler Insp. & Ins. Co.
of Martford. CT have inspected the components described in this owner's Report during the period to
, and state that to the best of ery knowledge and belief, the owner has performed examinations and taken corrective measures described in
)
this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or i@ lied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the inspector nor his e@loyer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
M b.
Comissions Ti'o s Ioro Intspect or's nature National Board, State, Province, and Endorsements Date d v ^ t.
9, 1993
g m.
%./
CPSES 215-2 Report to.
14793-015 FORM NIS-2 OWNER'S REPORT O' REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owwr TU Electric Date MaY 21. 1993 (Name)
P.O. Sou 1002. Glen Rose. TX 76043 Sheet 2
of
~ 2 (Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56. 5 miles North of Glen Rose. Texas STA-731 Repair Organization P.O. No., Job No., etc.a.
3.
Work Performed by TO ELECTRIC (Name)
Type Code Spbot Stapp N/A P.O. BOX 1002 GLEN ROSE. TX 76043 Authortration No.
N/A (Address)
Expiration Date N/A 4
Identification of System Auxiliary Feedwater Reference N-5 8AF-1-1616 Item Ntrber
- Repaired, Name of Conponent Manufacturer's Name Natet
- Replaced, ASME Code Component Identification and Board Year or Starped Authorizing Other Identification Serial Ntrnber No.
Built Replacement (Yes or No)
Doctament Description of Work ITEM:
1 MACHINED INNER BONNET AND WEDGE.
VALVE 1-HV-24948 BORG WARNER ONE 92-1285 17671 N/A 1979 REPAIR YES 1-92 001470-00 a
._,_-__m.
m
_____.m__.-o,.
m m
CPSES NIS-2 RIport No.
1AF93-016 FORM NIS-2 OWNER'S REPCM OF REPA!R C;t REPLACEMENT As Required by ths Provisions of ASME Code $$ction XI 1.
Owner TU Electric Date May 21, 1993
('
(Name)
P.O. Box 1002 cien Pose. TX 76043 Sheet 1
of 2
(Address) 2.
Plant Comanche Peek Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56. 5 miles North of Glen Rese. Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Perforced by TU ELECTRIC (Name}
Type Code Syvnbol Stanp W/A P.O. Box 1002 CLEN ROSE, TX 76043 Authorization No.
W/A (Address)
Expiration Date N/A 4.
Identification of system Auxiliary Feedwater Reference N-5 #AF.1 1616 5.
(a) Applicable construction Code See 111 19 74 Edition, WINTER 74 Addenda, Code Cases N/A (b) Applicable Edition of Section XI Utilized for Repairs or Replacements
- 19p6, Q Addenda, Code Cases N/A 6.
Identification of Conponents Repaired or Replaced, and Replacement Components
- Repaired, Manufacturer's Name Nat'l
- Replaced, ASME Code and Board Other Year or Stamped Name of Conponent Serial Nunber No.
Identification Built Replacement (Yes or No)
(See pages 2 thru 2 attached) 7.
Description of Work See Attached 8.
Tests Conducted:
O Hydrostatic Pneunatic Nominal Operating Pressure Other N/A Pressure N/A psi Test Temp.
N/A
'T-9.
Remarks VALVE IS ASME !!! CODE CLASS 2.
(Applicable Manufacturer's Data Reports to be attached)
CERTIFICATION OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR conforms to the rules of the ASME Code,Section XI.
repair or replacement Type Code Symbol Stanp N/A Certificate of Authoritation No.
N/A Expiration Date N/A Si N
d(!M 4
/ Supervisor. Mech. Codes & Standards Date b*[
19 i
(twr)(r or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Bolter and Pressure Vessel inspectors and the State or Province of Texas and enployed by Hartford steam Botter Inso. & Ins, Co.
of Hertford. CT have inspected the conponents described in this Owner's Report daring the period to
, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or inplied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neitt. r the Inspector nor his enployer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
/ N h.
Comissions TV 4 > / Old inspector s ' Signature Nationat Board, State, Province, and Endorsements g
Date mat LI, 19 93
h 2
c te 6
1 0
3 9
f o
3 9
o N
A A
A 9
1 1
/
/
/
k b
N u N
r mU1 F
A o
o 1
J W
2 e
2 f
y o
a o
o M
N no N
it T
6 O.
p E
t 1
r t
o e
e t
P 6
ir N
N p
t e i 1
c O
e a
h n
n p y
o n
1 s
B R
D S
U i
a e
2 t
t F
D R
a S
A E
I iz N
S l o N
N n
oN e5 I
e a b t -
S g
un aN D
E r
yo D
E S
O Si N
P 1
t n
I r
ea oe H
C 3
ia oi t n A
7 dz ic C
A p Cr ae M
T e
o rr S
R eh ie pt pf yu xe TA ER g
int 0
n 0
ize m
51 I
rt 06
+
X oc 34 T
h o 11 N n t D
- 0 E o u
20 Mi A
9 -
Et 2
C c E9 A e N -
)
o e
o RC ddN O
oe E
Cpr S
RM no E
S Ea Y
IAA Mt s P
SS e Ef A
Y R o
(
F s On tn o
Ti dd e
R s ee m
Oi rc e
P v iarc R
E o al oa I
R r pp l
A P
ee p
P S
RR e
E
' e R
R Rh Et NW y t
Ob rl 9
ai 7
2d eu 9
- e YB 1
S r Ii N u q
ld Me
't ao r.
RR O
aoN A
F s NB
/
A N
e
)
m S
3 a
E 4
N r
S s
0 e
P a
6 s b C
x 7
'r s
(
e t
T X
edN R
0 e.
T r
rn E
3 n
4 o
e ual N
t t
a R
6 it s
E a
c i
A a
r W
7 a
o S
)
t R
O s f
e 2
S
)R s
e u
S G2 X
n e
e e
n R3 e
mN r
F a
O8 T
ic l
Nt d
y aE d
M B2 r
G c
e t
(G A
r i
s ) c f
(
a r ) o se o
2 i
t eR sl 0
l c m eE h
C 0
i e an r
t l
N e dm r
I 1
x R
u E
(l da o
T X
A n
G A e N
C O
o U
( t E
B n
T S
s L
m i o t
2 e
E e
t ai ict O.
0 k
l t
ia s
r 1
e i
U 0
a m
T P
y e
.f c
P S
b vii v
x 5
r
,tf o
e y
f t -
ni B
h b
o N eet c
6 Cdn n
5 d
n m
i e e
e o
ef d
O.
m m
i t otI P
o d.
r t
I C
R o
a e sr f
c m
e Wh m
r a
r e
i N
f t
A a
P i
,O 1
1 r
t F
t e
9 e
n k
n C
4 n
a r
e 2
u l
o d
- E -
O P
W I
MVV EL H 1 A -
1 V1 1
2 3
4
CPSES WIS-2 Report No.
1AF93-017 FOCM WIS-2 OWNER'S REPC27 0F REPAIR OR REPLACEKENT As R2qJired by the Provisions of ASME Code Section XI 1.
Owner TU Etertric Date May 21. 1993 p
(Name) 5 P.O. Box 1002, Gl en Rose. TX 76043 Sheet 1
of 2
\\
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSFS)
Unit 1
Farm Ad. 56, 5 miles North of cien Rose Texac STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC (Name)
Type Code Symbol Stamp N/A P.O. Box 1002 GLEN ROSE TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4.
Identification of System Auxiliary Feedwater Reference N-5 *AF-1-1616 5.
(a) Applicable Construction code See III 19 74 Edition, WINTER 74 Addenda, Code Cases N/A (b) Applicable Edition of Section XI Utilized for Repairs or Replacements - 198,66 No_ Addenda, code Cases N/A 6.
Identification of Components Repaired or Replaced, and Replacement Conponents
- Repaired, Manufacturer's Name Nat'l
- Replaced, ASME Code and Board Other Tear or Stanped Name of Cocponent Serial Number No.
Identification Built Replacement (Tes or No)
(See pages 2 thru 2 attached) 7.
Description of Work See Attached 8.
Tests Conducted:
O O
Hydrostatic Pneunatic Nominal Operating Pressure Other N/A Pressure N/A psi Test Tenp.
W/A
'F 9.
Remarks VALVE IS ASME I!! CODE CL ASS 3.
(Applicable Manuf acturer's Data Reports to be attached)
CERTIFICATION OF COMPLIANCE We certify that the statements made in the report are correct and this REPATR conforms to the rules of the ASME Code,Section XI.
repair or replacement i
Type Code Symbol Stamp N/A Certificate of Authorization No.
N/A Expiration Date N/A Si ned b 1/J me
/ Supervisor, Mech. Codes & Standards Date MdO
.19.f3
/
Opner/r Owner's Designee, lit te CERTIFICATE OF INSERVICE INSPECTION I, the mdersigned, holding a valid consnission issued by the National Board of Soller and Pressure Vessel Inspectors and t
the State or Province of Texas and enployed by Hartford Steam Boller Insp. & Ins. Co.
of Hartford, CT have inspected the conponents described in this Owner's Report during the period to
, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his enptcyer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this in pection.
m Al Conrnissions IC N A J-
/Md Ins or's Signature National Board, State, Province, and Endorsements b f/ A 4 N 19 $3
~
Date v
b
~
CPSES NIS-2 Report No.
1AF93-017 FORM NIS-2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owner TU Electric Date May 21. 1993 (Name)
P.O. Box 1002. Gteri Rose. TX 76043 Sheet 2
of 2-(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm ad. $6. 5 altes Worth of Glen Rese. Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC (Name)
Type Code Symbol Stanp N/A P.O. BOX 1002 GLEN RCSE. TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4.
Identification of System Auxiliary Feedwater Reference N-5 #AF-1-1616 Item Ntrber
- Repaired, Name of Conponent Manufacturer's Name Nat'l
- Replaced, ASME Code Component identification and Board Year or Stamped Authorizing other Identification Serial Ntsber No.
Built Replacement (Yet or No)
Doctsnent Description of Work ITEM:
1 MACHINED VALVE NECK SEAL RING AREA TO REMOVE VALVE NICKS AND SCRATCHES.
1AF-0057 BORG uARNER 17142 N/A 1976 REPAIR YLS 3-92-301020 01 i
,,.m a
.m.
m
.m.
m.
.o.
_,a
...u*.-
e-a m
i CPSES NIS-2 Report No.
1AF94-001 FORM WIS-2 OWNER'S REPC2T OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Ccde Ssetion XI 1.
Owner TU Electric Date January 7,1994 I
O (Name)
P.O. Box 1002 Glen Rose. TX 76043 Sheet 1
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56, 5 miles North cf Glen Rose, Texas ST A-731 Repair Organization P.O. No., Job No., etc...
i 3.
Work Performed by TV ELECTRIC (Name)
Type Code Symbol Stamp N/A P.O. BOX 1002 GLEN ROSE. TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4.
Identification of System Auxiliary Feedwater Reference N-5# AF-1-1616 z
5.
(a) Applicable Construction Code Sec 11!
19 74 Edition, WINTER 74 Addenda, Code Cases N/A (b) Applicable Edition of Section XI utilized for Repairs or Replacements - 1986, N1 Addenda, Code Cases N/A 6.
Identification of Components Repaired or Replaced, and Replacement Components i
- Repaired, I
Manufacturer's Name Nat'l
- Replaced, ASME Code and Board Other Year or Stanped Name of Component Serial Nisnber No.
Identification Built Replacement (Yes or No)
(See pages 2 thru 2 attached) 7.
Description of Work See Attached B.
Tests Conducted:
O Hydrostatic Pneumatic Nominal Operating Pressure Other N/A Pressure N/A psi Test Tenp.
N/A
- F 9.
Remarks VALVE 15 ASME III CCOE CLASS 2.
(Applicaote Manufacturer's Data Reports to be attached) i CERTIFICATION OF COMPLIANCE We certify that the statements made in the report ere correct and this REPLACEMENT conforms to the rules of the ASME Code,Section XI.
repair or replacement Type Code Synbol Stanp N/A Certificate of Authorization No.
N/A Expiration Date N/A S ed M d%S M M
/ Supervisor Mech. Codes & Standards Date S /3
,19 W I
owner 4r owner's Designee, iltle CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and l
the State or Province of Texas and employed by Hartford Steam Boiler insp. & Ins. Co.
of Hartford, CT have inspected the conponents described in this Owner's Report during the period k n m,-v 2(1 M3 to let a s c e v ICf iM4
, and state that to the best of my knowledge and belief, the Owner has perfo6ned eiaminations and taken Eorrective measures described in
[
this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
(
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or inplied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his enployer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
L Commissions W )UL5"
/O M nspector's' Signature National Board, State, Province, and Endorsements Date rJ L*.V Y l 9,19 9 4 I
i CPSES NIS-2 Report No.
1AF94-001 FORM NIS-2 CWWER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owner,
TU Electric Date January 7. lo94 (Name)
P.O. Box 1002. Glen Rose. TX 76043 Sheet 2
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56. 5 miles North of Glen Rose. Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC (Name)
Type Code Synbot Stanp N/A P.O. BOX 1002 GLEN ROSE. TX 76043 Authorization No.
N/A (Address)
Empiration Date N/A 4.
Identification of System Auxiliary Feedwater Reference N-58 AF-bi616 4
Item Ntrber
- Repaired, Name of Conponent Manufacturer's Name Nat'l
- Replaced, ASME Code Corponent identification and Board Year or Starped Authorizing Other Identification Serial Ntstjer No.
Built Replacement (Yes or No)
Doctanent Description of Work ITEM:
1 REPLACED VALVE GATE; NEW !;/N 224318SN3. THl5 VALVE VALVE WAS RETURNED TO THE WAREHOUSE AS A 1AF-0097 BORG WARNER ONE 93-1593 SPARE UNDER TSN 293256.
BRP-AF-1-SB-018 25072 N/A 1977 REPLACEMENT TES 1-92-001307 00
CPSES Nis-2 Report No.
1AF94 002 FORM NIS-2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owner TU Electrie Date January 19, 1994 i
{}
(Name)
P.0, Rox 1002. Glen Rose. TX 76043 Sheet 1
of 2
)
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit i
Farm Rd. 56, 5 miles North of Glen Rose, Texas STA-731 i
Repair Organization P.O. No., Job No., etc...
l 3.
Work Performed by TU ELECTRIC (Name)
Type Code Synbol Stamp N/A P.O. B0r 1002 CLEN ROSE TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4.
Identification of System Auxiliary Feedwater Reference N-5# AF-1-1616 5.
(a) Applicable construction Code See III 19 74 Edition, WINTER 74 Addenda, Code Cases N/A (b) Applicable Edition of Section XI utilized for Repairs or Replacements - 1986, E Addenda, Code Cases N/A 6.
Identification of Comonents Repaired or Replaced, and Replacement conponents
- Repaired, Manufacturer's Name Nat't
- Replaced, ASME Code and Board Other Year or Stamped Name of Component Serial Nmber No.
Identification Built Replacement (Yes or No)
(See pages 2 thru 2 attached) 7 Description of Work See Attached 8.
Tests Conducted:
Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure N.O.P.
psi Test Ternp.
N.O.T.
'T 9.
Remarks VALVE IS ASME !!! CODE CLASS 3.
(Applicable Manufacturer's Data Reports to be attached)
CERTIFICATION OF COMPL]ANCE We certify that the statements made in the report are correct and this REPLACE, MENT conforms to the rules of the ASME Code,Section XI.
repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No.
N/A Expiration Date N/A Signed d/.5 4
/ Supervisor, Mech. Codes & Standards Date bb
. 19
/
O p r gr' Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid consnission issued by the National Board of Boller and Pressure Vesset Inspectors and the State or Province of Texas and employed by Hartford Steam Boller Insp. 1 Int. Co.
of Hartford, CT have inspected the components described in this owner's Report during the period
.h W u v N M3 to
.b o,6/
19.fiCD/
and state that to the best of my knowledge and belief, the Owner has perf orm6d eitaminations and takeri corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his enployer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his estoyer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or 1
connected with th', inspection.
l g
U fb commissions Tr' V_ A S
/ O YO l
Insp ar's signature National Board, State, Province, and Endorsements j
' M A t>rt r V, b 19 9 4,
)
Date R
O CPSES NIS-2 Report No.
1AFva-002 FORM NIS-2 OWNER'S REPORT OF REPAlR OR REPLACEMEhi As Required by the Provisions of ASME Code Section XI 1.
Owner TU Electric Date January 19 1994 (Name)
P.O. Box 1002. Glen Rose. TX 76043 Sheet 2
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56. 5 miles North of Glen Rose. Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC (Name)
Type Code Synbol Stanp N/A P.O. BOX 1002 GLEN Rose. TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4.
Identification of System Auxillary Feedwater Reference N-5# AF-1-1616 Item Nunber
- Repaired, Name of Cocponent Manufacturer's Name Nat'l
- Replaced, ASME Code Component Identification and Board Year or Stanped Authorizing Other Identification Serial Number No.
Built Replacement (Yes or No)
Document Description of Work ITEM:
1 REPLACED VALVE INTERNAL ASSEMBLY WITH VALVE INTERNALS FROM VALVE 2AF-0086 S/N 14856 PER 1AF-0098 BORG WARNER PET #2575. REFERENCE ONE 93-2318.
BRP-AF-1-SB-030s 44565 N/A 1979 REPLACEMENT YES 1-92-001999-00 l
l l
l 1
l
CPSES NIS 2 Riport No.
1AF94-003 FCT.M NIS-2 OWNER'S REPCRT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Srction XI 1.
Owner TV Electric Date January 7, 1994 (Name)
P.O. Box 1002. Cten Rose, TX 76043 Sheet i
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56, 5 miles North of Glen Rose. Texas STA.731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TV ELECTRIC (Name)
Type Code Symbol Stanp N/A P.O. BOX 1002 GLEN ROSE. TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4.
Identification of System Auvillary Feedwater Reference N-5# AF-1*1616 5.
(a) Applicable Construction Code Sec !!!
19 74 Edition, W1NTEK 74 Addenda, Code Cases N/A (b) Applicable Edition of Section XI Utilized for Repairs or Replacements - 1986,110,, Addenda, Code Cases N/A 6.
Identification of Components Repaired or Replaced, and Replacement Components
- Repaired, Manufacturer's Name Wat'l
- Replaced, ASME Code and Board Other Year or Stanped Name of Component Serial Nmber No.
Identification Built Replacement (Yes or No)
(See pages 2 thru 2 attached) 7.
Description of Work See Attsebed O
O O
8.
Tests Conducted:
Hydrostatic Pneunat ic Nominal Operating Pressure Other N/A j
Pressure N/A psi lest Tenp.
N/A
- T 9.
Remarks VALVE IS ASME 111 CODE Ct. ASS 3.
I (Applicable Manufacturer's Data Reports to be attached)
CERTIFICATION OF COMPL!ANCE We certify that the statements made in the report are correct and this REPAfR conforms to the rules of the ASME Code,Section XI.
repair or replacement Type Code symbol Stanp N/A Certificate of Authorization No.
N/A Expiration Date N/A d8
/ Supervisor. Mech. Codes & Standards Date
/-/)
,19 W S ed M 4Q U 4
8 j0g or Owner's Designee, Title CERTIFICATE OF ]NSERVICE INSPECTION I
1, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and j
the State or ProYince of Texag and enployed by Hartford Steam Boller Inso. & Ins. Co.
of Hartford, Ct have inspected the components described.
]
in this Owner's Report during the period da m tes $) /riito i n var v fi /1rl y
, and state that l
to the best of ny knowledge and belief, the Owner has perforded ex&minations and taken'correttive measures described in this owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his enployer makes any warranty, expressed or inplied, con;erning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his enployer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this ins ption.
[ O.
tL Conunissions
'T1* D-3 /OVU Ins r s signature National Board, State, Province, and Endorsements a
Date x t)(t/ V l#I
, 19 %
\\
V
- V u
CPSES WIS-2 Report No.
1AF94-003 FORM NIS-2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owner TV Electric Date January 7. 1994-(Name)
P.O. Box 1002. Glen Rose. TX 76043 Sheet 2
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56. 5 miles North of Glen Rose. Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC (Name)
Type Code Symbol Stamp N/A P.O. BOX 1002 GtEN ROSE. TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4.
Identification of System Auxiliary Feedwater Reference N-5# AF-1-1616
.3 Item Nurber
- Repaired, Name of Copponent Manufacturer's Name Nat'l
- Replaced, ASME Code Copponent Identification and Board Year or Stanped Authorizing Other Identification Serial Number No.
Built Replacement (Yes or No)
Document Description of Work ITEM:
1 REMOVED EXCESS METAL FROM INTERNAL BODY BY VALVE MACHINING.
1AF-0032 BORG WARNER DCN 7123 BRP-AF-1-SB-006 12014 N/A 1976 REPAIR YES 3-93-316331-01
i CPSES N!S-2 Rtport No.
11.F94 004 4
I FCCM NIS 2 OWNER'S REPCtT OF REPA!R CR REPLACEMENT As Required by the Provisions of ASME Code Section XI I
i Owner TV Electric Date January 7, 1994 O 1.
(Name)
P.O. Box 1002. Glen Rose. TX 76043 Sheet 1
of 2
(Address) 2.
Plant Comanche Peak Steam Electric station (CPSES)
Unit 1
Farm Rd. 56. 5 miles North of Glen Rose, Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by,,T,U ELECTRIC (Name)
Type Code Symbol Stapp N/A P.O. BOX 1002 CLEN ROSE TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4.
Identification of System Auxiliary Feedwater Reference N-5# AF-1-1616 5.
(a) Applicable construction code See !!!
19 74 Edition, WINTER 74 Addenda, Code Cases N/A (b) Applicable Edition of Section x1 utilized for Repairs or Replacements - 1986, N,0,, Addenda, Code Cases N/A 6.
Identification of Components Repaired or Replaced, and Replacement Conponents
- Repaired, Manufacturer's Name Nat'l
- Replaced, ASME Code and Board Other Year or Stanped Name of Component Serial Ntsnber No.
Identification Built Replacement (Yes or No)
(See pages 2 thru 2 attached) 7.
Description of Work See Attached O
0 x
8.
Tests Conducted:
Hydrostatic Pneumatic Nominal Operating Pressure Other Pressure N.O.P.
osi Test Temp.
N.O.T.
'F 9.
Remarks VALVE IS ASME lit CODE CLASS 3.
(Applicable Manufacturer's Data Reports to be attached)
CERTIFICATION OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR conforms to the rules of the ASME Code,Section XI.
repair or replacement Type Code Syntot Stamp N/A Certificate of Authorization No.
N/A Expiration Date N/A S ned M VS "W
/ Supervisor Mech. Codes & Standards Date
/- N 19 W owne( or Owner's Designee, Title CERTIFICATE OF INSERVICE IkSPECTION 1, the undersigned, holding a valid comission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Texas and employed by Nartford Steam Boiler Inso. & Ins. Co.
of Hartford CT have inspected the components described l
in this owner's Report during the period du ve,v b) i<ie to
_L. o r ns 19 ff r/V and state that to the best of my knowledge and belief, the Owner has perfofmed ' examinations and taken' corr (etive measures described in
.)
this owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his enployer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his enployer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this in pection.
J O.
Comissions 7h t_a i /UKU s
tor's Signature National Board, State, Province, and Endorsements d(Ln va ry l #l, 19 ') 4 j
Date 1
[
1AF94-004 FORM NIS-2 OWN'_R'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owner TU Electric Date January 7. 1994 (Name)
P.O. Box 1002. Glen Rose. TX 76043 Sheet 2
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56, 5 miles North of Glen Rose. Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC (Name)
Type Code Syntot Stanp N/A P.O. box 1002 GLEN ROSE. TX 76043 Authorization No.
4/A (Address)
Expiration Date N/A 4.
Identification of System Auxiliary Feedwater Reference N-58 AF-1-1616 1 tem Number
- Repaired, Name of Conponent Manufacturer's Name Nat'l
- Replaced, ASME Code Caponent Identification and Board Year or Stanped Authorizing Other Identification Serial Nmber No.
Built Replacement (Yes or No)
Document Description of Work ITEM:
1 WELD REPAIR AND MACHINING OF VALVE BCDY TO VALVE REPAIR STEAM CUTS IN THE SEAL RING AREA.
1AF-0083 BORG WARNER ONE 92-1348 BRP-AF-1-SB-027B 44564 N/A 1979 REPAIR TES 1-92-001997-00
CPSES WIS-2 Report No.
1CA94 001 FORM Nis-2 OWNER'S REPORT OF REPAIR OR REPLACER.ENT As Required by the Provisions of ASME Code $cction XI l
i 1.
Owner TU Electric Date January 7. 1994 (Name) p.0. Box 1002, Glen Rose, TX 76043 Sheet 1
' of 2
(Address) 2.
Plant Comanche Peak Steem Electric Station (CPSES)
Unit 1
l Farm Rd. 56, 5 miles North of Glen Rose Texas STA-731
.i Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC (Name)
Type Code symbol Stamp N/A l
P.O. BOX 1002 GLEN ROSE, TX 76043 Authorizatior. No.
N/A (A dress)
Expiration Date N/A 4.
Identification of System Compressed Air Reference N-5# CA-1-0001 5.
(a) Applicable Construction Code See !!!
19 74 Edition, SUMMER 74 Addeda, Code Cases N/A (b) Applicable Edition of Section XI Utilized for Repairs or Replacements - 1986, & Addenda, Code Cases W/A 6.
Identification of Components Repaired or Replaced, and Replacement Components
- Repaired, Manufacturer's Name Nat'l
- Replaced, ASME Code and Board Other Year or Stamped Name of Component Serial Ntsrber No.
Identification Built Replacement (Yes or No)
(See pages 2 thru 2 attached) i 7.
Description of Work See Attached L
8.
'ests Conducted:
Hydrostatic Pneumatic Nominal Operating Pressure Other N/A Pressure N/A Dsi Test Temp.
N/A 9.
Remarks VAtVE IS ASME !!! CODE CLASS 2.
( Applicable Manuf acturer's Data Reports to be attached)
CERTIFICATION OF COMPLIANCE l
We certify that the statements made in the report are correct and this REPLACEMENT conforms to the rules of the ASME Code,Section XI.
repair or replacement 1ype Code Symbol Starrp N/A t
certificate of Authorization No.
N/A Expiration Date N/A A'O 19 N igned [N//CVS M ch
/ Supervisor. Mech. Codes & Standards Date
/
/Owgr or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure vessel Inspectors and i
the State or Province of Texas and employed by Martford Steam Boller Insp. & Ins. Co.
of Nortford, CT have inspected the components described in this owner's Report during the period
&,u - e v Jn //r13 to Lou. i4 19'#/
, and state that to the best of my knowledge and belief, the owner has perf ornied ekaminations and taifen corrective measures described in this Dwner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or
- 2 connected with this inspection.
l4
/^
4f O. Ntid Commissions Wu s
/Ofd l
(
Inspec
's Signat,re National Board, State, Province, and Endorsements ba w.vv Fl, 19 'bi Date
CPSES NIS-2 Report No.
1CA95-001 FORM NIS-2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owner fu Electric Date January 7. 1994 (Name)
P.O. Box 1002. Glen Rose. TX 76043_
Sheet ___ 2 of 2
(Address)
I 2.
Pi at Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56. 5 mit?s North of Glen Rose. Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC (Name)
Type Code Sypbol Stanp N/A P.O. BOX 1002 GLEN ROSE. TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4.
Identification of System Coppressed Air Reference N-5# CA 1-0001 Item Ntrber
- Repaired, Name of Conponent Manufacturer's Name Nat'l
- Replaced, ASME Code Corponent Identification and Board Year or Stanped Authorizing other Identification Serial Number No.
Built Replacement (Yes t.r No)
Document Description of L_:rk ITEn:
1 REPLACED PLUG; S/N KC6587-1.
VALVE 1-HV-3486 FISHER BIP-CA-1-SB 001 6436300 4217 1979 REPLACEMENT YES 1-93-056422-00 t.
i CPSES NIS 2 Report to.
1CC93 010 FC3t NIS-2 OWNER'S REPORT OF REPAIR C2 REPLACEMENT As Required by the Provisions of ASME Code Section XI i
1.
Owner TU Electric Date May 21. 1993 i
(Name)
P.O. Box 1002, Glen Rose. TX 76043 Sheet i
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit i
Farm Rd. 56, 5 mites North of Cten Rose. Texas STA-731 i
Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC 1
(hame)
Type code Symbol Stanp N/A P.O. BOX 1002 CLEN ROSE. 1X 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4
Identification of System Conconent Cooling Water Reference N-5 #CC-1-1649 5.
(a) Applicable Construction Code Sec Ill 19 74 Edition, SUMMER 74 Addenda, Code Cases N/A (b) Appt icable Edition of Section XI Utilized for Repairs or Replacements - 1986,1 Addenda, Code Cases N/A 6.
Identification of Conponents Repaired or Replaced, and Replacement Components
- Repaired, Manufacturer's Name Nat'l
- Replaced, ASME Code and Board Other Year or Stanped Name of Cornponent Serial Ntsnber No.
Identification Built Replacement (Yes or No)
(See pages 2 thr : attached) e 7.
Description of Work See Attached 8.
Tests Conducted:
O O
Hydrostatic Pneumatic Nominal Operating Pressure Other N/A Pressure N/A psi Test Tenp.
N/A
- F
~
9.
Remarks VAtVE IS ASME III CODE CLASS 3.
(Applicable Manufacturer's Data Reports to be attached) t CERTIF1 CAT 10N OF COMPL!ANCE We certify that the statements made in the report are correct and this REPLACEMENT ccaforms to the rules of the ASME Code,Section XI.
repair or replacement Type Code Synbol Stamp N/A Certificate of Authorization No.
N/A Expiration Date N/A Si N ds/.f M (2#
/ Supervisor. Mech. Codes & Standards Date b- [
, 19 b I
$wng or Cwner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid conunission issued by the Nationat Board of Boiler and Pressure Vesset Inspectors and the State or Province of Temas and enployed by Nortford Steam Boiler Insp. 8 Ins. Co.
of Martford, ci have inspected the conponents described in this owner's Report during the period to
, and state that to the best of my knowledge and belief, the Owner has perf ormed examinations and taken corrective measures described in this Dwner's Report in accordance with the requirements of the ASME Code,Section XI.
l By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning i
the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his j
enployer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or j
connected with this inspe tion.
O.
Commissions "72 KA 1 /dfd
~
g Inspec
's Signature National Board, State, Province, and Endorsements I
bvAt 7
19 1.3 Date i
CPSES NIS-2 Report No.
1CC93-010 FORM NIS-2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owner TU Electric Date May 21. 1993 (Name)
P.O. Box 1002. Glen Rose. TX 76043 Sheet 2
of 2
(Address) 2.
Plant Corenche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56, 5 miles North of Glen Rose. Texas STA-731 Repair Organization P.O. No., Job no., etc...
3.
Work Performed by TU ELECTRIC (hame)
Type Code SWL Stanp N/A P.O. Box 1002 GtEN ROSE. TX 76043 Authorization No.
N/A (Address)
Empiration Date N/A 4
Identification of System Conconent Cooling Water Reference N-5 #CC-1-1649 Item Nwber
- Repaired, Name of Copponent Manufacturer's Name Nat'l Replaced.
ASME Code Conponent Identification and Board Year or Stanped Authorizing other Identification Seriet N wber No.
Built Replacement (Yes or No)
Document Description of Work ITEM:
1 MODIFICATION - REPLACED BODY TO BONNET VALVE BOLTING WITH A DIFFERENT MATERIAL.
1-TV-4694 FISHER 1-92 022338-00 6526936 4177 1979 REPLACEMENT YES DM 92-023
CPSES NIS-2 Rrport No.
1CC93-011 FCQM NIS-2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI i
1.
Owner TU Electric Date May 21, 1993 (Name)
P.O. Box 1002, Glen Rose, TX 76043 Sheet 1
of 2
(Address) 2.
Plant Comanche Peak Steam Eteetric Station (CPSES)
Unit 1
5 Farm Rd. 56, 5 miles North of Glen Rose. Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC (Name)
Type Code Synbol Stanp N/A P.O. BOX 1002 GLEN ROSE, TX 76043 Authorization No.
N/A i
(Address)
Expiration Date N/A 4.
Identification of System Conconent Cooting Vater Reference N-5 #CC-1-1649 5.
(a) Applicable Construction Code See it!
19 74 Edition, SUMMFR 74 Addenda, Code Cases N/A (b) Applicable Edition of Section XI Utilized f or Repairs or Replacements - 1986, NO, Addenda, Code Cases N/A O
6.
Identification of Components Repaired or Replaced, wand Replacement Conponents
- Repaired, Manufacturer's Name Nat'l
- Replaced, ASME Code and Board Other Year or Stamped Name of Component Serial NLanber No.
Identification Built Replacement (Yes or No)
(See paSes 2 thru 2 attached)
[
7.
Description of Work See Attached 8.
Tests Conducted:
O O
Hydrostatic Pneumatic Nominal Operating Pressure Other N/A Pressure N/A est Test Tenp.
W/A
'F 9.
Remarks VALVE IS ASME !!! CODE CLASS 3.
( Applicable Manuf acturer's Data Reports to be attached)
CERTIF!dATION OF COMPL]ANCE We certify that the statements made in the report are correct and this REPL ACEMENT conforms to the rules of the ASME Code,Section XI.
repair or replacement Type Code Symbol Stano N/A i
Certificate of Authorization No.
W/A Expiration Date N/A Sig N O Y' $
dC8
/ Supervisor, Mech. Codes & Standards Date
~!
, 19 1
I (wnyf or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid comission issued by the National Board of Boller and Pressure vessel Inspectors and the State or Province of Texas and employed by Hartford Steam Boiler insp. & Ins. Co.
of Martford, CT have inspected the components described in this Owner's Report during the period to
, and state that to the best of my knowledge and belief, the Owner hes performed examinations and taken corrective measures described in this owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
g
- Nb Comissions TGA A /888 iCr"ctor'ssignature National Board, State, Province, and Endorsements v
ht/M 3
.,19 h 3 Date t
c O
O CPSES WIS-2 Report to.
TCC93 011 FORM NIS 2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
O wter TO Etectric Date May 21. 1993' (Name)
P.O. Box 1002. Ct en Rose. Tx 76043 Sheet 2
of 2
(Ackfress) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56, 5 miles North of Cten Rose. Temas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC (Name)
Type Code Srbol Stamp N/A P.O. BOX 1002 GLEN POSE. TX 76043 Authorization No.
N/4 (Address)
Empiration Date N/A 4.
Identification of system Cecronent Cooling Water Reference N-5 ACC-1 1649 lleva Nwber
- Repaired, Name of Copponent Manufacturer's Name Nat'l
- Replaced, ASME Code Component identification and Board Year or Staeped Authorizing other Identification Serial Nwber No.
Built Replacement (Yes or No)
Document Description of Work ITEM:
1 REPLACED BOOT 10 BONNET BOlilWG AND PLUG (S/N VALVE LA1166-3).
1-TV-4693 FISHER 6526935 4168 1979 REPLACEMENT YES 1-92-022336 00
.w v
a
-4
-r
-eN
- w w - +--
g-y-----
.w,=ce w
w
-r ra i-it-
,e et
- p.vT
=ww-4 y-?--
w-
-r
=-wT-u?--
y,<
ese-
-e,,
,.a
CPSES NIS-2 Report No.
1CCf3+012 FORM Nis-2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owner TU Electric Date May 21, 1993 (Name)
P.O. Box 1002, Ct en Rose. TX 76043 Sheet i
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Stetion (CPSES)
Unit 1
Farm Rd, 56, 5 miles North of Glen Rose. Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC (Name)
Type Code 5ymbo4 5 tamp N/A P.O. BOX 1002 CLEN ROSE, TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4.
Identification of System Copponent Cooling Water Reference N-5 eCC-1-1649 5.
(a) Applicable Construction Code See !!!
19 74 Edition, SUMMER 74 Addenda, Code Cases N/A (b) Applicable Edition of Section XI utilized for Repairs or Replacements - 1986,1 Addenda, Code Cases N/A 6.
Identification of Components Repaired or Replaced, and Replacement Conponents
- Recaired, Manufacturer's Name Nat'l
- Replaced, ASME Code and Board Other Year or Stamped Name of Component Serial Number No.
Identification Built Replacement (Yes or No)
(See pages 2 thru 2 attached) 7.
Description of Work See Attached O
O 8.
Tests Conducted:
Hydrostatic Pnematic Nominal Operating Pressure Other N/A Pressure N/A Dsi Test Temp.
W/A
'F 9.
Remarks VALVE 15 ASME !!! CODE CLASS 3.
(Applicable Manufacturer's Data Reports to be attached)
CERTIFICAfl0N OF COMPL!ANCE We certify that the statements made in the report are correct and this _
REPtACEMENT conforms to the rules of the ASME Code,Section XI.
repair or replacement Type Code Synbol Stanp N/A Certificate of Authorization No.
W/A Expiration Date N/A S ed N d s/4
- /
/ Supervisor, Mech. Codes & Standards Date d/
19 i
Ow6er/rOwner'sDesignee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid conunission issued by the National Board of Boiler and Pressure vessel Inspectors and the State or Province of Texas and enployed by Hartford steam Boiler insp, & Ins. Co.
l of Hartford, CT have inspected the conponents described in this owner's Report during the period to
, ard state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his enployer makes any warranty, expressed or inplied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liabis in any manner for any personal injury or property damage or a toss of any kird arising from or connected with this i spection.
1 df h r Commissions TF I O /Yd in ctor's Signature National Board, State, Province, and Endorsements j
Date b vor
?,1993 I
I
i l
CPSES WIS-2 Report No.
1CC93-012 FORM NIS-2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owner TU Electric Date May 21. 1993 (Name)
P.O. Box 1002. Glen Rose. TX 76043 Sheet 2
of 2
(Address) 2.
Plant C&tenche Peak Steam Electric Station (CPSES) thiit 1
Farm Rd. 56. 5 miles North of Glen Rose. Texas ST A 731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC (Name)
Type Code S)cbol Stanp N/A P.O. BOX 1002 GLEN ROSE. TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4
Identification of System Conconent Cootirvj Water Reference N-5 #CC-1-1649 Item Ntrd>er
- Repaired, Name of Corponent Manufacturer's Name Nat'l
- Replaced, ASME Code Cornponent Identification and Board Tear or Steeped Authorizing Other Identification Serial Nteber No.
Built Replacement (Yes or No)
Doctment Description of Work ITEM:
1 REPLACED BOOT To BONNET BOLTING AND PLUG (S/N VALVE LA1166-1).
1-TV-4691 FISHER 6526933 4166 1979 REPLACEMENT TES 1-92-022320-00
CPSES NIS*2 Report No.
1CC93-013 FC2;I NIS-2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI l
1.
Owner TU Electric Date May 21, 1993 i
(Name)
\\
P.O. Box 1002. Glen Rose, Tx 76043 Sheet 1
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
UMt i
l Farm ed. 56, 5 miles North of Glen Rose. Texas ST A-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed try TU ELECTRIC (Name)
Type Code Symbol Stanp N/A P.O. BOX 1002 GLEN ROSE TX 76043 Authorization No.
W/A (Address)
Expiration Date N/A 4
Identification of System Component Cooling Water Reference N-5 eCC-1-1649 5.
(a) Applicable construction Code See Ill 19 74 Edition, SUMMER 74 Addenda, Code Cases N/A l
(b) Applicable Edition of Section XI Utilited for Repairs or Replacements - 1986, NL Addenda, Code Cases N/A 6.
Identification of Conponents Repaired or Replaced, and Replacement Components
- Repaired, Manuf acturer's Name Nat'l
- Replaced, ASME Code and Board Other Year or Stamped Name of Component serial Nwber No.
Identificatien Built Replacement (Yes or No)
(See pages 2 thru 2 attached) 7.
Description of Work See Attached O
O 8.
Tests Conducted:
Hydrostatic Pneunat ic Nominal Operating Pressure Other N/A Pressure N/A osi Test Temp.
N/A
'F 9.
Remarks VALVE IS ASME !!! CODE CLASS 3.
(Applicable Manuf acturer's Data Reports to be attached) l CERTIFICATION OF COMPLIANCE We certify that the statements made in the report are correct and this REPLACEMENT conforms to the rules of the ASME Code,Section XI.
repair or replacement Type Code Synbol Stanp N/A Certificate of Authorization No.
N/A Expiration Date N/A 5 ed $Non/5 M
/ Supervisor, Mech. Codes 8 Standards Date d'[
, 19 f3 hwng or Owner's Designee, Title -
/
CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid comnission issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of Texas and enployed by Hertford Steam Boiler Insp. & Ins. Co.
of Martford, CT have inspected the conponents described in this owner's Report during the period to and state that to the best of my knowledge and belief, the owner has perf ormed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his employer mares any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his enployer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inepection.
_ h.
Consnissions 72 kt _S
/ Of /)
Ins ' or's Signature National Board, State, Province, and Endorsements Date b i./ M e
")
19 *ll
CPSES MIS 2 Re;nrt to.
1CC93-013 FORM NIS-2 OWER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owner TU Electric Date May 21. 1993 (Name)
P.O. Box 1002. Glen Rose. TX 76043 Sheet 2
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56. 5 miles North of Glen Rose. Texas ST A-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC (Name)
Type Code Synbol Stanp N/A P.O. BOX 1002 GLEN ROSE. TX 76043 Authorization No.
W/A (Address)
Expiration Date N/A 4.
Identification of System Cteponent Cooling Water Reference N-5 #CC-1-1649 Item Nteber
- Repaired, Name of Corvonent Manufacturer's Name Nat'l
- Replaced, ASME Code Conponent Idc.itification and Board Year or Stanped Authorizing Other Identification Serial Nunber No.
Bullt Replacement (Yes or No)
Docunent Description of Work ITEM:
1 REPLACED YALVE PLUG AND BODY TO BONNET VALVE BOLTING. (PLUG S/N LL1166-2).
1-TV-4692 FISHER DM 92-023 6526934 4167 1979 REPLACEMENT YES 1-92-022323-00
CPSES NIS 2 Rtport No.
1CC94-001 FORM NIS-2 OWNER'S REPORT OF REPAIR OR REPl.ACEMENT As Required by the Provisions of ASME Code Section XI t
1 Owner TV Electric Date January 7, 1994
[
(Name)
P.O. Box 1002. Glen Rose. TX 76043 Sheet i
of 2
(Address)
- 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit i
Farm Rd. 56, 5 miles North of Glen Rose, Texas STA-731 3.
Llork Performed by TU ELECTRIC (Name)
Type Code Symbol Stamp N/A P.O. BOX 1002 GLEN ROSE. TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4
Identification of System Component Coolino Water Reference N-5# CC-1-1649 5.
(a) Applicable Construction Code See 111 19 74 Edition, WIW1ER 74 Addenda, Code Cases N/A I
(b) Applicable Edition of Section XI utilized for Repairs or Replacements - 19{6,, NL Addenda, Code Cases N/A 6.
Identification of Conponents Repaired or Replaced, and Replacement Components
- Repaired, j
Manufacturer's Name Nat'l
- Replaced, ASME Code and Board Other Year or Stamped Name of Conponent Serial Number No.
Identification Built Replacement (Yes or No)
(See pages 2 thru 2 attached) t 7.
Description of Work See Attached O
O 8.
Tests Conducted:
Hydrostatic Pneumatic Nominal Operating Pressure Other N/A Pressure N/A osi Test Temp.
N/A
'F 9.
Remarks VALVE IS ASME fil CODE CLASS 2.
(Applicable Manuf acturer's Data Reports to be attached)
CERTIFICATION OF COMPLIANCE We certify that the statements made in the report are correct and this REPAIR conforms to the rules of the ASME Code,Section XI.
repair or replacement Type Code Synbol Stamp N/A Certificate of Authorization No.
N/A Expiration Date N/A i
i MWdy r
/
&7
/ Supervisor, Mech. Codes & Standards Date
/- M
,19b i
psneforowner'sDesignee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid conrnission issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of Texas and enployed by Hartf ord Steam Boiler Insp. & Ins. Co.
of Hartford, CT have inspected the conponents described in this owner's Report during the period d A Auc e v 29 1Y13 to JAew r y l9 (f fi e t/
and state that to the best of my knowledge and belief, the owner has perfor'med examinations and ta(en co'rrective measures described in this owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
4/
C Conrnissions R Nt1
/0 @
Inspec s Signature National Board, State, Province, and Endorsements Date
~ kA n va rv l'l,19 14 C
^"h 8
1-
/
CPSES NIS-2 Report No.
1CCv4-001 FORM NIS 2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owner TU Electric Date January 7. 1994 (Name)
P.O. Box 1002. Glen Rose. TX 76043 Sheet 2
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56. 5 miles North of Glen Rose. Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Perfortned by TO ELECTRIC (Name)
Type Code Synbol Stamp N/A P.O. Box 1002 GLEN ROSE. TX 76043 Authorization No.
W/A (Address)
Expiration Date N/A 4
Identification of Systern Cormonent Cooling Water Reference N-5# CC 1-1649 Item Ntr6er
- Repaired, Name of Component Manufacturer's Name Nat'l
- Replaced, ASME Code Conponent Identification and Board Year or Stanped Authorizing Other Identification Serial Ntznber No.
Built Replacement (Tes or No)
Doctanent Description of Work ITEM:
1 MACHINED BOOT AND BONNET.
VALVE 1 HV-4696 BORG WARNER ONE 93-2013 BRP-CC-1 RB-013 44559 N/A 1979 REPAIR TES 1-92-032083-00
. -. _... ~. _.,
CPSES NIS-2 Report N3.
1Cen4 002 FOR:t NIS-2 OWNER'S REPC2T OF REPA!R OR REPLACEMENT l
As Required by ths Provisions of ASME Code Section XI 1.
Owner TU Electric Date January 12. 1994
[
r (Name) i P.O. Box 1002 Glen Rose. TX 76043 Sheet 1
of' 2
'i (Address) 2.
Plant Comanche Pesk Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56, 5 miles North of Glen Rose. Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TV ELECTRIC (Name)
Type Code Symbol Stamp N/A P.O. Box 1002 GLEN ROSE. TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4.
Identification of System Corrponent Cooling Water Reference N-5# CC-1-1649 (a) Applicable Construction Code See III 19 74 Edition, SUMMER 74 Addenda, Code Cases N/A i
(b) Applicable Edition of Section XI utilized for Repairs or Replacements - 1986, N0_, Addenda, Code Cases N/A l
t 6.
Identification of Components Repaired or Replaced, and Replacement Conponents
- Repaired, Manufacturer's Name Nat'l
- Replaced, ASME Code and Board other Year or Stamped.
i Name of Component Serial Nunber No.
Identification Built Replacement (Yes or No)
(See pages 2 thru 2 attached)
.i 7.
Description of Work See Attached j
l
- 8. ~ Tests Conducted:
Hydrostatic Pneumatic Nominal Operating Pressure Other j
Pressure 215 ost Test Temp.
64
'Fj 9.
Remarks PIPING IS ASME III CODE CLASS 3.
(Applicable Manufacturer's Data Reports to be attached)
CERTIFICATION OF COMPLIANCE We certify that the statements made in the report are correct and this REPLACEMENT conforms to the rules of the ASME Code,Section XI.
repair or replacement Type Code Symbol Stapp N/A Certificate of Authorization No.
W/A Expiration Date N/A Signed 7E b b e N I
/ Supervisor Mech. Codes & Standards Date b/3 19 9M
/
/ pr or Owner's Designee, Title CERTIFICATE OF INGERVICE INSPECTION I, the u1dersigned, holding a valid comission issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of Texas and enployed by Hartford Steam Boiler Insp. & Ins. Co.
of Hartford. CT have inspected the conponents described -
in this owner's Report during the period M --, 9 9 eM to hov FF /9 W
, and state that to the best of my knowledge and belief, the owner has perforined efaminations and taken cor'rective measures described in this owner s Report in accordance with the requirements of the ASME Code,Section XI.
e By signing this certificate neither the Inspector nor his enployer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his enployer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
M Comissions Ti'itA S /OXO spector's Signature National Board, State, Province, and Endorsements Date b^AJA/V I1
,19 M
/
1
?
\\
w CPSES NIS-2 Rtport No.-
1CC94-002 FORM NIS 2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owner TU Electric Date January 12. 1994 (Name)
P.O. Box 1002. Glen Rose. TX 76043 Sheet 2
of 2
(Ackfress) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56, 5 miles North of Glen Rose. Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TO ELECTRIC (Name)
Type Code Synbot Stamp N/A P.O. BOX 1002 GLEN ROSE. TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4.
Identification of System Cononnent Cooling Water Reference N-5# CC-1-1649 Item Ntsber
- Repaired, Name of Conponent Manufacturer's Name Nat*t
- Replaced, ASME Code Conporent identification and Board Year or Stanped Authorizing Other Identification Serial Ntsiber No.
Built Replacement (Tes or No)
Document Description of Work ITEM:
1 MODIFICATION: REPLACED BRANCH CONNECTION WITH PIPING A 45 DEGREE LATERAL BY WELDING, INCLUDING BIP CC-1 SB-005 BROWN & ROOT ONE 92-163/DCN 5756 PIPE PUP PIECE.
PC #42 N/A 1984 REPLACEMENT TES 4-93-040391-00
CPSES NIS-2 Report No.
1CS94*001 P
FORM NIS-2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owner TV Electric Date January 7, 1994 (Name)
P.O. Box 1002, Glen Rose. TX 76043 Sheet 1
of 2
-(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Ed. 56, 5 miles North of Glen Rose, Texas ST A-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC (Name)
Type Code Symbol Stamp N/A P.O. BOX 1002 Gl.EN ROSE, TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4
Identification of System Chemical & Voltsne control Reference N-5# CS-1-1633 5.
(a) Applicable Construction Code See !!!
19 74 Edition, SUMMER 74 Addenda, Code Cases 1553-1 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements - 198,6, N0_,, Addenda, Code Cases N/A 6.
Identification of Components Repaired or Replaced, and Replacement Components
- Repairsd, Manufacturer s Name Nat'l
- Replaced, ASME Code a
and Board Other Year or Stamped Name of Component Serial Number No.
Identification Built Replacement (Yes or No)
I' (See pages 2 thru 2 attached) 7.
Description of Work See Attached O
O O
i 8.
Tests Conducted:
Hydrostatic Pneumatic Nominal Operating Pressure Other N/A Pressure h/A psi Test Temp.
N/A
'F
?
9.
Remarks VALVE is ASME III CODE CLASS 2.
(Applicable Manufacturer's Data Reports to be attached)
CERTIFICATION OF COMPLIANCE We certify that the statements made in the report are correct and this REPLACEMENT conforms to the rules of the ASME Code,Section XI.
repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No.
N/A Expiration Date N/A Signed N
/I 8 a4,,
/ Supervisor. Mech Codes & Standards Date h/3 19 N j
/
/0$p(er or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION i
I, the undersigned, holding a valid convoission issued by the National Board of Boller and Pressure vessel Inspectors and the State or Province of Texas and employed by Hartford Steam Boiler Insp. & Ins. Co.
I of Hartford, CT have inspected the components described j
in this Owner's Report during the period
.ht,3 va v 2ci t% 2to a c n vr e r R M *i4
, and state that to the best of my k.nowledge and belief, the owner has performed examinations and taken co'rrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his e m ioyer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this ins ction.
(-
O.
It b Commissions Tc' Y.M
/Ofd
'r's Signature National Board, State Province, and Endorsements Inspe Date b M> Ar-V b 19 M
T.
CPSES NIS-2 Report to.
ICS94-001 FORM NIS-2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owner TU Electric Date Jarvary 7, 1994 (Name)
P.O. Box 1002 Glen Rose. TK 76043 Sheet 2
of 2
(Ackfress) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56, 5 miles North of Glen Rose. Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Perforsned by TU ELECTRIC (Name)
Type Code Synbol Stanp N/A P.O. Box 1002 GLEN ROSE. TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4.
Identification of System Chemical & voltane Control Reference N-54 CS-1-1633 Item Ntstber
- Repaired, Name of Conponent Manufacturer's Name Nat'l
- Replaced, ASME Code Corponent Identification and Board Year or Stanced Authorizing other identification Serial Ntater No.
Built Replacement (Yes or No)
Document Description of Work ITEM:
1 REPLACED VALVE DISC WITH DISC N 6142.
VALVE 1-6485A WESTINGHOUSE BRP-CS-1-AB-001 0032 U11968 1977 REPLACEMENT YES 1-93-05B075-00
CPSE$ NIS-2 Rtport No.
1CS94-002 FCOM NIS-2 OWNER'S REPO2T OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Ccde Section XI i
1.
Owner TU Electric Date January 7, 1994 (Name)
(s P.O. Box 1002. Glen Rose TX 76043 Sheet 1
of 2
(Address) 2.
Plant Comanche Peair Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56. 5 miles North of Glen Rose, Texas ST A-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC i
(Name)
Type Code Symbol Stamp N/A r
P.O. BOX 1002 GLEN ROSE. TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4.
Identification of System Chemical & Volume control Reference N 5# CS-1-1633 5.
(a) Applicable Construction Code Sec !!!
19 74 Edition, SUMMER 75 Addenda, Code Cases N/A (b) Applicable Edition of Section XI Utilized for Repairs or Replacements - 19g, N,f0, Addenda, Code Cases N/A 6.
Identification of Components Repaired or Replaced, and Replacement Components
- Repaired, Manufacturer s Name Nat'l
- Replaced, ASME Code a
and Board other Year or Stamed Name of Component Serial Ntster No.
Identification Built Replacement (Ves or No)
(See peges 2 thru 2 attached) i 7.
Description of Work See Attached 8.
Tests Conducted:
O O
Hydrostatic Pneumatic Nominal Operating Pressure Other N/A Pressure N/A est Te d Temp.
N/A
'I 9.
Remarks VALVE 15 ASME !!! CODE CLASS 2.
(Applicable Manufacturer's Data Reports to be attached)
CERT!FICATION OF COMPLIANCE We certify that the statements made in the report are correct and this REPLACEMENT conforms to the rules of the ASME Code,Section XI.
repair or replacenent j
Type Code Symbol Stamp N/A Certificate of Authorization No.
N/A Expiration Date N/A Nh4.M a4
/ Supervisor Mech. Codes & Standards Date 4M
, 19 W S
/
Ownpf or Owner's Designee, Title l
l CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid comission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Texas and emloyed by Hartford Steam Boiler Insp. & Ins. Co.
of Martford, CT have inspected the components described in this Owner's Report during the period d u um a, Rat 19q1 to.. hgary ;RO M 94/
. and state that to the best of my knowledge and belief, the Owner has perforded 6xaminations and taktin corfective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or i g lief, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspe.: tor nor his e mioyer shall be liable in any manner for any personal injury or property damage or a loss of any kind r.ising from or connected with t is inspection.
b.
Comissions 76_i
/0 YO Inspector's Signature National Board, State, Province, and Endorsements b uva/ V ZD,19N Date
O[A i
CPSES NIS-2 Report No.
FORM NIS-2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owner Tb Electric Date January 7. 1994 (Name)
P.O. Box 1002. Cien Rose. TX 76043 Sheet 2
of 2'
(Address) 2.
Plent Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56. 5 miles North of Glen Rose. Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TV ELECTRIC (Name)
Type Code Synbol Stamp N/A P.O. COX 1002 GLEN ROSE. TX 76043 Authorl2ation 40.
N/A (Address)
Expiration Date N/A 4.
Identification of System Chemical & Volune Control Reference N-5# CS-1-1633 Item Nunber
- Repaired, Name of Corponent Manufacturer's Name Nat'l
- Replaced, ASME Code Conponent Identification and Board Year or Stanped Authorizing other ib ntification Serial Ntaber No.
Built Replacement (Tes or No)
Docunent Description of Work ITEM:
1 REPLACED VALVE PLUG; S/N 9221-46167-3-2.
VALVE 1-FCV-0121 COPES VULCAN BRP-CS-1-AB-004 7620-95371-219-1 1040 1977 REPLACEMENT YES 1 92-001361-00 I
ll
=
CPSES NIS-2 Report No.
1CS94-003 FCCM NIS-2 OWNER'S REPCRT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owner TV Electric Date January 20. 1994 (Nane)
P.O. Box 1002, Glen Rose, TX 76043 Sheet 1
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
]
Farm Rd. 56, 5 miles North of Glen Rose. Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Perforned by TU ELECTRIC (hame)
Type Code Symbol Stanp N/A P.O. BOX 1002 GLEN ROSE. TX 76043 Authoritation No.
N/A (Aadress)
Expiration Date N/A
{
4.
Identification of System Chemical & Volune Control Reference N 5# CS-1-1633 t
5.
(a) Applicable construction Code See !!!
19 74 Edition, SUMMER 74 Addenda, Code Cases-N/A l
(b) Applicable Edition of Section XI Utilized for Repairs or Replacements - 1986, NO,,, Addenda, Code Cases N/A 6.
Identification of Components Repaired or Replaced, and Replacement Components
- Repaired, Manufacturer's Name Nat'l
- Replaced, ASME Code r
and Board other Year or Stamped Name of Conponent Serial Nwber No.
Identification Built Replacement (Yes or No)
(See pages 2 thru 2 attached) 7.
Description of Work See Attached 8.
Tests Conducted:
0 0
x Hydrostatic Pnetanatic Nominal Operating Pressure Other Pressure 3500 osi Test Temp.
68
'F 9.
Remarks VALVE AND PIPING ARE ASME !!! CODE CLASS 2.
(Applicable Manufacturer's Data Reports to be attached)
CERTIFICATION OF COMPLIANCE We certify that the statements made in the report are correct and this REPLACEMENT conforms to the rules of the ASME Code,Section XI.
repair or replacement j
Type Code Synbol Stamp N/A l
Certificate of AuthorlZation No.
N/A Expiration Date N/A S gned N dd N de
/ Supervisor, Pech. Codes & Standards Date
[-
EO 19 b i
OwnerforOwner'sDesignee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid comission issued by the National Board of Boller and Pressure Vessel In.pectors and the State or Province of Texas and enployed by Hartford Steam Boiler insp. E ins. Co.
of Hartford, CT have inspected the components described in this Owner's Report during the period
.b m va n 2,4I*f43 to
.hsLAu e V_gW 19 W
, and state that to the best of my knowledge and belief, the owner has perfofmed' examinations and takeh corrbetive measures described in this owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his enployer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with thi inspection.
d/ O.
Comissions TCML.L /Ok'd pector's Signature National Board, State, Province, and Endorsements N
U Date R M/ O f Y EO
, 19 N l
l
[
F CPSES NIS-2 Report No.
1CS94-003 FORM NIS-2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code section XI 1.
Owner TO Electric Date January 20, 1994 (Name)
P.O. Box 1002. Glen Rose. TX 76043 Sheet' 2
of 2
(A&Jress) 2.
Plant Comenche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56. 5 miles North of Glen Rose. Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TO ELECTRIC (Name)
Type Code Synbol Stanp N/A P.O. BOX 1002 GLEN ROSE. TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4
Identification of System Chemical & Voltre Control Reference N-5# CS-1-1633 Item Number
- Repsired, Name of Corponent Manufacturer's Name Nat'l
- Replaced, ASME Code Conponent Identification and Board Year or Stanped Authorizing Other Identification Serial Ntrber No.
Built Replacement (Yes or No)
Docunent Description of Work ITEM:
1 REPLACED VALVE AND ASSOCIATED PIPING;NEW VALVE VALVE S/N 90AES;C00E EDITION--1974 SUMMER 75; 1CS-8387A ROCKVELL MM 93-135 NEW PIPING HEAT #474905.
i BRP-CS-1-AB-118 AG 870 N/A 1979 REPLACEMENT YES 1-93-036679-00 t
a w
w e--
-a v
-,~
~w n.
-w.g
-w m---
v
-w.m
, -~,
+-
,en+-,
n-,-
5'*
FORM NF'V 1 N CERTIFICATE HOLDER.7 DATA REPORT FOR NUCLEAR PUMPS OR VALVES
- As Required by ttsa Pr visions of tts3 ASME C4co. Secti:n Ill. Div.1 bWra ero A LVd'S DC-- I$f'/' S Sa d 2X b 2ALA'CM A C 2768T
- 1. Manufacturec Dy (Name ano Acoress et N certificate moscy)
- 2. Manufacturec for INA I hr N < E' C o
- 2i d-0's N. E er i002_btidEdM YX 7IdON.3 m.
iName ano Accress M 89tenaser or Owneri Na dN 4 b 5 b.
4ifn/ b <# U
)
1 Location of Instattation. theme ano accressa 700M
/
s r LV E Nomsnal Intet site Outiet Size L
e b
d, Pump or Valve tinent innem (a) Mocel No. (b) N Certificate moleer's (c) Canacian Senes No.
serias Registration (c) Drawing (f) Nat*L (g) Year or Type NC.
No.
No.
(e) C! ass Sc. No.
S uat gy 33r.r2Jfe.nbri 90AES slin C 3ic ovsov i
N/s (C 9 L g:) B ualt WP3D rt 9/AES NM C3rc0 750 7 1
rifA-190 1.
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(1 01 5.
~3 L c> M (Snet cosenotion of service tor wn.cn equeomem was ossegnec
- 6. Design Conditions 227O 600 esi
- F or Valve Pressure Class
/52/
(u (Pressures demooreture
- 7. Colc Wortmg Pressure O ESO si at 100*F.
- 8. Pressure Retaimng Pieces l
Mark No, Matenat Spec. No.
Manufacturer Remarts (a) Castmes l
l l
E I A15&?Gt I / A 732Cu.21 ' Gaseavano PW O!%<
l i
I I
l
. 1 l
I l
I I
i i
I I
i I
l l
I i
l I
i l
I I
l l
[b) Forgings U. D !
l SA I A2 Ga. F31C,
- i. Iia'E R.57 M t S W es t l
=;e v M 234/o-Iol i
Sp J% T.Elle l Cout~me Srem
%k7 I
I l
f i
I I
i l
l l
(1) For manuany operated vaeves only, h 8 M 0" do/
- Supplemental sneers in form of lists. sketches or drawings may be used proviced (1) sue is 81t2 n 11*. (2) information in items 1, 2 and S on this Data Report is incluced on each sneet, and (3) each sheet is numbered and number of sheets
- i is recorded at too of Inis form.
(10/77)
Th : form 1E00C37) mov oe acts. nee from rne Creer Deot ASME,345 E. 47tn St. New Yoru N.Y.10017
y ygggygy a wm. a, -. ws, Mirs N 2.
Mrt:rs:1 So c. N3.
Manufacturer R:m:rss (c) Botting l
l l
l 1
l 1
I I
l s\\
l l
'%/
l l
l l
l I
I I
I I
l l
(di Otner Parts I
l l
I I
l l
l l
r i
l l
l 1
I I
I I
l l
I l
l i
5475
- p.,.
o,a om.,,ntia, ten o,eno,e 3 6 60,,,.
- 9. Hvorostatic test CERTIFICATE OF COMPUANCE We certify that the statements made in this report are correct and that this pump. or valve. conforms ~ to the rules of censtruction of the ASME Code for Nuclear Power Plant Components. Section lit. Div.. l.. Edition
/97Y Addenda. Sum a /97 5. Code Case No.
AI/n 4//A /9 2-t Signed _ be OWOS DC -
my
^
i, 3)
Our ASME Certificate of Authonzation No.
N
- M 2-to use the f
tu conmente *<ascen
.~
symool expires II NN N.
~
aus cetes CERTIFICATION OF DESIGN Design information on file at E.Dango %cvss Lc. T6, cri5n d.C_. 27ao a Stress analysis report (Class 1 only) on file at Ode VMLVes &
Design specifications certified by (1)
MA W CW 3 D t L o rtfrd E. c PE State D Reg.No.
b0088 Stress analysis certified by (1) 5 L Asomn r < 4-PE State f0 0 Reg.No.
AI$7 (1) Signature not reovired. List name onty.
CERT 1F1CATE OF SHOP INSPECTION
- l. the undersigned. holding a valid commission issued by the National Board of Boiler and Pressure Vessel inspectors and the State or Province of NCRTff bo r_IM A and employed by M
- I b of FIND -
I have inspected the pump, or valve, described in this Data Report on 4"
b 19
. and state that to the best of my knowledge and belief. the N Certificate Holder has con-7 I
structed this pump. or valve in accordance with the ASME Code. Section 111.
By signing this certificate neither the inspector nor his employer makes any warranty. exDressed or implied, concaming the equipment described in this Data Report. Furthermore, neither the inspector nor his employer shall be liable in any G
manner for ny persona injury or property damage or a loss of any kind arising from or connected with this inspection.
Date t-19 b.
h/0f,
)0 g
f
(']!% %"
Comm#ssions
)
UbalDeCl0ff
{
(Nas i So., State. Prew. and No.1
s CPSES NIS-2 Report No.
1CT93-009 FORM NIS-2 OWNER'S RkP02T OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owner TV Electric Date May 25. 1993 g
(Name)
.(
P.O. Box 1002. Glen Rose. TX 76043 Sheet 1
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56. 5 miles North of Glen Rose. Texas STA-731
_m Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC (Nume)
Type Code Symbol Stamp N/A P.O. Box 1002 GLEN ROSE. TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4.
Identification of System Containment Spray Reference N-5 #CT-1-1642 5.
(a) Applicable Construction Code See III 19 74 Edition, SUMMER 74 Addenda, Code Cases N/A (b) Applicable Edition of Section XI utilized for Repairs or Replacements - 19g6, Q Addenda, Code Cases N/A 6.
Identification of Conponents Repaired or Replaced, and Replacement Components
- Repaired, Manufacturer's Name Nat'l
- Replaced, ASME Code and Board Other Year or Stamped Name of Component Serial Number No.
Identification Built Replacement (Yes or No)
(See pages 2 thru 2 attached) 7.
Description of work See Attached O
O O
8.
Tests Conducted:
Nydrostatic Pneumatic Nominal Operating Pressure Other N/A Pressure N/A osi Test Tenp.
N/A
'F-9.
Remarks VALVE IS ASME til CODE CL ASS 2.
(Applicable Manuf acturer's Data Reports to be attached)
CERTIFICATION OF COMPLIANCE We certify that the statements made in the report are correct and this REPLACEMENT conforms to the rules of the ASME Code,Section XI.
repair or replacement Type Code Symbol Stanp N/A Certificate of Authorization No.
N/A Expiration Date N/A si ned k atM cf V
/ Supervisor. Mech. Codes & Standards Date 8-2 O
,19 N
/
[0wprorOwner'sDesignee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Texas and enployed by Martford Steam Boller insp. & ins. Co.
of Martford. Ct have inspected the components described in this Owner's Report during the period to and state that to the best of my knowledge and belief, the Owner has perf ormed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or inplied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his enployer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
n j
h.
Comnissions TfKn%
/OYO Inspec as Signature Nationat soard, State, Province, and Endorsements Date bM 7, 19 %
1 w
CPSES 215-2 Report to.
1CT93-009 FORM KIS-2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owner TU Electric Date May 25. 1993 (Name)
P.O. Box 1002. Glen Rose. TX 76043 Sheet 2
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56, 5 miles North of Glen Rose. Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC (Name)
Type Code Syrnbol stamp N/A P.O. BOX 1002 GLEN Rose. TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4
Identification of System Contaltunent Spray Reference N-5 #CT-1-1642 Item Ntsber
- Repaired, Name of Component Manufacturer's Name Nat'l
- Replaced, ASME Code Cceponent identification and Board Year or Stanped Authorizing other Identification Serial Nuter No.
Built Replacement (Yes or No)
Document Description of Work ITEM:
1 REPLACED VALVE PLUG (S/N PB 2184 3).
VALVE 1 FV-4772-1 FISHER 6519101 6160 1981 REPLACEMENT YES 1-92-022024-00
.. ~...
'CPSES WIS-2 Report No.
1CT93-010 FORM NIS-2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owner 70 Electric Date May 21. 1993 i
[
(Name)
P.O. Box 1002. Glen Rose. TX 76043 Sheet 1
of
'2 i
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit i
Farm Rd. 56. 5 miles North of Glen Rose. Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU FLECTRIC (Name)
Type Code Synbol Stanp N/A P.O. BOX 1002 GLEN ROSE. TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4.
Identification of System Containment Spray Reference N-5 eCT-1 1642 5.
(a) Applicable Construction Code See 111 19 74 Edition, SUMMER 74 Addenda, Code Cases N/A (b) Applicable Edition of Section XI Utilited for Repairs or Replacements - 1986, }lo,, Addenda, Code Cases N/A 6.
Identification of Components Repaired or Replaced, and Replacement Ccmponents
- Repaired, Manufacturer's Name Nat'l
- Replaced, ASME Code and Board Other Year or Stamped Name of Component Serial Number No.
Identification Built Replacement (Yes or No)
(See pages 2 thru 2 attached) 7.
Description of Work See Attached
- 8.. Tests Conducted:
O O
O Hydrostatic Pnetsnatic Nominal Operating Pressure Other N/A Pressure N/A osi Test Temp.
N/A
'F 9.
Remarks valve IS ASME !!! CODE CLASS 2.
(Applicable Manufacturer's Data Reports to be attached)
CERTIFICATION OF COMPLIANCE We certify that the statements made in th report are correct and this REPLACEMENT conforms to the rules of the ASME Code,Section XI.
repair or replacement Type Code Symbol Stanp N/A Certificate of Authorization No.
N/A Expiration Date N/A 5g 4W 4/
/ Supervisor. Mech. Codes & Standards Date b-[
19 D
/
Dw[ or Owner's Designee, title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of Texas and enployed by Hartford Steam Boiler insp. & Ins. Co.
of Martford CT have inspected the components described in this owner's Report during the period to
, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the eneminations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his i
enployer shall be liable in any manner for any personal injury er nmperty damage or a loss of any kind arising from or 1
connected with this inspection.
O, O
v bM Conrnissions "TdVA3 /o#o Date I, 19 9 ~3
CPSES NIS-2 Report No.
FORM NIS-2 OWNER'S REPORT OF REPA!R OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owner TU Electric Date May 21. 1993 (Name)
P.O. Box 1002. Glen Rose TX 76043 Sheet 2
of 2
(Address) 2.
Plant Comanche Peek Steam Electric Station (CPSES)
L%it 1
Farra Rd. 56, 5 miles North of Glen Rose. Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC (Name)
Type Code Sywbot Stanp N/A P.O. BOX 1002 GLEN ROSE. TX 76043 Autnorization No.
N/A (Ackfress)
Expiration Date N/A 4.
Identification of Systeve Contairvaent Spray Reference N 5 #cT-1-1642 1 tem Ntaber
- Repaired, Name of Cocponent Manufacturer's Name Nat'l
- Replaced, ASME Code Copponent identification and Beard Year or Stanped Authorizing other Identification Serial Nmber No.
Built Replacement (Yes or No)
Doctsnent Description of Work ITEft:
1 REPLACED VALVE PLUG (S/N PS2184-2).
VALVE 1-FV 4773-2 FISHER 6519104 5376 1980 REPLACEMENT YES 1-92-022027-00
CPSES NIS-2 Report No.
1CT93-011 FORM NIS-2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Rtquired by the Provisions of ASME Code Section XI 1.
Owner TU Electric Date May 21, 1993 (Name)
P.O. Box 1002. Glen Rose. TX 76043 Sheet 1
of 2
\\
(Address) 2.
Plant Comanche Peair Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56, 5 miles North of Glen Rose, Texas STA-731
)
3.
Work Performed by TU ELECTRIC (Name)
Type Code Symbol Stamp N/A P.O. BOX 1002 CLEN ROSE. TX 76043 Authorization No.
W/A (Address)
Expiration Date N/A 4.
Identification of System containment Spray Reference N 5 ecT 1-1642 5.
(a) Applicable construction Code See III 19 74 Edition, SUMMER 74 Addenda, Code Cases N/A (b) Applicable Edition of Section XI utilized for Repairs or Replacements - 19pp, & Addenda, Code Cases N/A 6.
Identification of Components Repaired or Replaced, and Replacement Conponents
- Repaired, Manufacturer's Name Nat'l
- Replaced, ASME Code and Board Other Year or Stamped Name of Component Serial NLsnber No.
Identification Built Replacement (Yes or No)
(See pages 2 thru 2 attached) 7.
Description of Work See Attached i
O O
8.
Tests Conducted:
Hydrostatic Pneumatic Nominal Operating Pressure Other N/A Pressure N/A psi Test Temp.
N/A
'F 9.
Remarks VALVE IS ASME !!! CODE CLASS 2.
(Applicable Manuf acturer's Data Reports to be attached)
CERTIFICATION OF COMPLIANCE We certify that the statements made in the report are correct and this REPLACEMENT conforms to the rules of the ASME Code,Section XI.
repair or replacement Type Code Symbol Stanp N/A Certificate of Authorization No.
N/A Expiration Date N/A S'igned 3 d#
a4,
/ Supervisor Mech. Codes 8 Standards Date h*[
, 19 W l
OdneforOwner'sDesignee,litte CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid connission issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of Texas and employed by Hartford Steam Boller Intp. & Ins. Co.
of Hartford. CT have inspected the components described in this owner's Report during the period to
, and state that to the best of my knowledge and belief, the Owner has perf ormed examinations and taken corrective measures described in this owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning
~
the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his enployer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
[.
Commissions Tir % A, ( /OFO
{
Inspe r's Signature National Board, State, Province, and Endorsements Date bVM V,1993 f-
- s. _ _,
s CPSES NIS 2 Report No.
1CT93-011 FORM NIS-2 OWNER'S REPORT OF REPAlR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owner TU Electric Date May 21. 1993 (Name)
P.O. Box 1002. Glen Rose. TX 76043 Sheet 2
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56. 5 miles North of Glen Rose. Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC (Name)
Type Code Sy1nbol Starrp N/A P.O. BOX 1002 GLEN ROSE. TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4
Identification of System Containment Spray Reference N-5 *CT-1-1642 Item Ntarber
- Repaired, Name of Conponent Manufacturer's Name Nat'l
- Replaced, ASME Code Corrponent Identification and Board Year or Stanped Authorizing Other Identification Seri
- Number No.
Built Replacement (Yes or No)
Doctsnent Description of Work ITEM:
1 REPLACED VALVE PLUG (PLUG SN P82184-1).
VALVE 1-F V-4773-1 FISHER 6519103 5217 1980 REPLACEMENT YES 1-92-022026-00
CPSES NIS 2 Report No.
1CT93-012 FOR;I NIS-2 OWNER'S REP 0;ti 0F REPAIR OR REPLACEHENT As Required by the Provisions of ASME Code Section XI t
i 1.
Owner TU Electric Date May 21, 1903 p
(Name)
P.O. Box 1002 Cten Rose TX 76043 Sheet 1
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
i Farm Rd. 56, 5 miles Worth of Cten Rose. texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TV ELECTRIC (Name)
Type Code Syrbol Stam W/A P.O. BOX 1002 CLEN ROSE TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4
Identification of System containment Sprov Reference N 5 eCT-1-1642 5.
(a) Applicable Construction Code See !!!
19 74 Edition, SUMMER 74 Addenda, Code Cases N/A (b) Applicable Edition of Section XI utilized for Repairs or Replacements - 19]p, NO,, Addenda, Code Cases N/A 6.
Identification of Comonents Repaired or Replaced, and Replacemer.t Comonents
- Repaired, Manufacturer's Name Nat'l
- Replaced, ASME Code and Board Other Year or Stamped Name of Component Serial Ntsnber No.
Identification Built Replacement (Yes or No)
(See pages 2 thru 2 attached) 7.
Description of work See Attached 8.
Tests Conducted:
Hydrostatic Pneumatic Nominal Operating Pressure Other N/A Pressure N/A psi Test Temp.
N/A
'F 9.
Remarks VALVE l$ ASME III CODE CLASS 2.
( Applicable Manuf acturer's Data Reports to be attached)
CERTIFICATION OF COMPLIANCE We certify that the statements made in the report are correct and this REPLACEMENT conforms to the rules of the ASME Code,Section XI.
repatr or replacement Type Code symbol Stamp N/A Certificate of Authorization No.
N/A Expiration Date N/A S
k:t VJ h 444
/ Supervisor, Mech. Codes & Standards Date b!
, 19
/
low;4r or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Texas and employed by Hartford Steam Boiler Insp. & Ins. Co.
of Martford, CT have inspected the conponents described in this owner's Report during the period to
, and state that-to the best of my knowledge aru:1 belief, the owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning -
the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his e@loyer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this ins ction.
Connissions TCLO /C[O f
Inspe res Signature (ational Board, State, Province, and Endorsements Date bAf F 19 43 i
~
OV (d'
CPSES NIS-2 Report co.
1CT93-012 FORM NIS-2 OmiER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owwr TU Electric Date May 21. 1993 (Name)
P.O. Box 1002. Glen Rose. TX 76043 Sheet 2
of 2
(Address) 2.
Plant Ctenanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56. 5 miles North of Glen Rose. Texas ST A-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC (Name)
Type Code Synbol Stapp N/A P.O. Box 1002 GLEN ROSE. TX 76043 Authorization No.
N/A (Address)
Empiration Date N/A 4
Identification of System. Contairunant Spray Reference N-5 #CT-1-1642 Item Ntr6er
- Repaired, Name of Conponent Manufacturer's Name Nat'l
- Replaced, ASME Code Conponent identification and Board Year or Stanped Authorizing Other Identification Serial Ntr6er No.
Built Replacement (Yes or No)
Docteent Description of Work ITEM:
1 10 VALVE PLUG. NEW PLUG SN #PS-2184-4.
VALVE 1-FV+ 4 772-2 FISHER 6519102 5216 1980 REPLACEMENT YES 1-92-022025-00 t
~.
~
CPSES NIS-2 Rsport No.
1CT94-001 FORM NIS-2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI Owner TV Electric Date January 7. 1994 O1.
(Name)
P.O. Box 1002. Cten Rose. TX 76043 Sheet i
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
j Farm Rd. 56, 5 miles North of Glen Rose, Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC (Name)
Type Code Symbol Stamp N/A j
P.O. BOX 1002 CLIN ROSE. TX 76043 Authorization No.
N/A j
(Address)
Expiration Date N/A 4.
Identification of System Containment spray Reference N-5# CT-1-1642 5.
(a) Applicable Construction Code See Ill 19 74 Edition, SUMMER 74 Addenda, Code Cases N/A (b) Applicable Edition of Section XI Utilized for Repairs or Replacements - 1986, & Addenda, Code Cases N/A
)
6.
Identification of Components Repaired or Replaced, and Replacement Components 4
- Repaired, Manuiccturer's Name Nat'l
- Replaced, ASME Code and Board other Year or Stamped Name of Component Serial Nunber No.
Identification Built Replacement (Yes or No)
(See pages 2 thra 2 attached) 7.
Description of Work See Attached 8.
Tests Conducted:
Hydrostatic Pneumatic Nominal Operating Pressure Other N/A I
Pressure N/A psi Test Temp.
N/A 9.
Rmarks VALVE IS ASME ill CODE CLASS 2.
( Applicable Manuf acturer's Data Reports to be attached)
CERTIFICATION OF COMPLIANCE We certify that the statements made in the report are correct and this REPLACEMENT conforms to the rules of the ASME Code,Section XI.
repair or replacement Type Code Synbol Stamp N/A Certificate of Authorization No.
N/A Expiration Date N/A ed M b t # M
/ Supervisor, Mech. Codes & Standards Date
/- / 3 19 N S
/
Awnj( or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION l
I, the undersigned, holding a valid commission issued by the National Bosrd of Boiler and Pressure Vessel Inspectors and !
the State or Province of Texas and e gloyed by Hartford Steam Boiter insp. & Ins. Co.
of Hartford, CT have inspected the co@onents described in this Owner's Report during the period dt.ua v 291913 to. kt n v er y (Ct 19fW and state that to the best of spy knowledge and belief, the Owner has perf'ormed' examinations and take'n corrective measures described in this owner's Report in accordance with the requirements of the ASME Code,Section XI.
'~
By signing this certificate neither the Inspector nor his e m loyer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising f rom or connected with this inspection.
8d b Comissions Yr4a 5
/ 0 VO Inspec
- s signatu're National Board, State, Province, and Endorsements 1 Aver f l#1
, 19 9 '1 Date
+%
CPSES 215-2 Report No.
ICive*001 -
FORM NIS-2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owner TU Electric Date January 7, 1994-(Name)
P.O. Box 1002. Glen Rose. TX 76043 Sheet 2
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56. 5 miles North of Glen Rose. Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC (Neme)
Type Code Synbol Stanp N/4 P.O. BOX 1002 GLEN ROSE. TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4.
Identification of System Containment Spray Reference N-5s Cr-1-1642 t
Item Nunber
- Repaired, Name of Copponent Manufacturer's Name Nat'l
- Replaced, ASME Code Component identification and.
Board Year or Stanped Authorizing Other Identification Serial Number No.
Built Replacement (Yes or No)
Docunent Description of Work ITEM 1
REPLACED BOLTING MATERIAL.
VALVE 1-FV-4772-2 FISHER BRP-CT-1-SB-024 6519102 5216 1980 REPLACEMENT YES 1-92-030234 00 1
.m.--.--
m. -
.---. m---
.m-.m--
-w-
a f
CPSES N!S-2 Report No.
1D094-001 FORM NIS-2 OWNER'S REPORT OF REPAIR 0;t REPLACEMENT As Required by the Provisions of ASME Code section XI l
1.
Owner TU Electrie Date January 7, 1994 O
(Name)
P.O. Box 1002, Glen Rose, TX 76043 Sheet 1
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
1 Farm Rd. 56, 5 miles North of Glen Rose, Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC (Name)
Type Code Symbol Stamp N/A P.O. Box 1002 GLEN ROSE, TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4
Identification of System Diesel Generator Auxiliary Reference N-5# 00-1-1449 t
5.
(a) Applicable Construction Code See ill 19 74 Edition, SUMMER 75 Addenda, Code Cases N-101 (b) Applicable Edition of Section XI utilized for Repairs or Replacements - 1986, N1 Addenda, Code Cases N/A 6.
Identification of Conponents Repaired or Replaced, and Replacement Components
- Repaired, Manufacturer's Name Nat'l
- Replaced, ASME Code and Board Other Year or Stamped Name of Component Serial Ntsnber No.
Identification Built Replacement (Yes or No) 4 (See pages 2 thru 2 attached) 7.
Description of Work See Attached 8.
Tests Conducted:
O Hydrostatic Pnetsnatic Nor;nal Operating Pressure Other N/A Pressure N/A psi Test Temp.
N/A
'F 9.
Remarks VALVE IS ASME 111 CODE CLASS 3.
( Applicable Manuf acturer's Data Reports to be attactied)
CERTIFICATION OF COMPLIANCE We certify that the statements made in the report are correct and this REH ACMai conforms to the rules of the ASME Code,Section XI.
repair or replacement Type Code Syntml Stamp N/A 4
Certificate of Authorization No.
W/A Expiration Date N/A S ned N/ dY.5 We
/ Supervisor. Mech. Codes & Standards Date
/- / 3 19 N i
7 Q Aer or Owner's Designee, Title l
CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid connission issued by the National Board of Boiler and Pressure Vessel Inspectors and i
the State or Province of Texas and employed by Hartford Steam Boiler Insp. & Ins. Co.
of Hartford. CT have inspected the components described in this Owner's Report during the period d a.s v v g2q fpd to -A a v u v IC1 NW
, and state that to the best of ny knowledge and belief, the Owner has perf ormed ex'aminations and tak'en corf ective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his enployer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this i spection.
di (.
Comnissions Ir*'5 (L.5
/08 0 in ctor's signature National Board, State, Province, and Endorsements Date b evArV El,19 N
./
CPSES 415-2 Report No.
1D004-001 FORM NIS-2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owner TU Electric Date Jeruary 7. 1994 (N ame)..
P.O. Box 1002. Glen Rose. TX 76043 Sheet 2
of 2
(Address) 2.
Plant Comanche Peak Steas Electric Station (CPSES)
Unit 1
Farm Rd. 56. 5 miles North of Glen Rose. Texas ST A-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed t y _ TU ELECTRIC (Name)
Type Code Synbot Stanp N/A P.O. BOX'1002 GLEN ROSE. TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4
Identification of System Diesel Generator Auxiliary Reference N-58 00-1-1449 Item Ntmeer
- Repaired, Name of Conponent Manufacturer's Name Nat'l
- Replaced, ASME Code Component Identification and Board Year or Starped Authorizing Other !cientification Serial Ntsnber No.
Built Reptscement (Yes or No)
Occument Description of Work ITEM:
1 REPLACED VALVE DISC; S/N 99.
VALVE 100-0064 ROCKWELL BRP-00-1-DG-049 BF012 N/A 1981 REPLACEMENT YES 1-93-046143-00
CPSES NIS-2 RIport No.
1FW93-015 FORM NIS-2 OWNER'S REP 02T OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1
TU Electric Date June 2, 1993 O. Owner (Name)
P.O. Box 1002, Glen Rose, TX 76043 Sheet 1
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Fa+v Rd. 56, 5 miles North of Glen Rose Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC (Name)
Type Code Symbol Stant N/A P.O. Box 1002 CLEN ROSE. TX 76043 Authorization No.
N/a (Address)
Expiration Date N/A 4
Identification of System Feedwater Reference N-5 eFu-1-1650 5.
(a) Applicable Construction Code See III 19 74 Edition, SUMuER 75 Addenda, Code Cases N 101,N-154 (b) Applicable Edition of Section xl utilized for Repairs or Replacements - 1986, 1 Addenda, Code Cases N/A 6.
Identification of Co@onents Repaired or Replaced, and Replacement Components
- Repaired, Manufacturer's Name Nat'l
- Replaced, ASME Code and Board Other Year or Stanped Name of Component Serial Number No.
Identification Built Replacement (Yes or No)
(see pages 2 thru 2 attached) 7.
Description of Work See Attached O
O 8.
Tests Conducted:
Hydrostatic Pnetsnat ic Nominal Operating Pressure Other N/A Pressure N/A psi Test Temp.
W/A
- F 9.
Remarks VALVE IS ASME !!! CODE CLASS 2.
(Applicable Manufacturer's Data Reports to be attached) 1 CERTIFICATION OF COMPLIANCE I
We certify that the statements made in the report are correct and this REPLACEMENT conforms to the rules of the ASME Code,Section XI.
repair or replacement Type Code Synibol Stamp N/A Certificate of Authorization No.
N/A Expiration Date N/A Sfg
/D).1 4
/ Supervisor, Mech. Codes & Standards Date b
, 19 I
O de g Owner's Designee, Title CERTIFICATE OF INSERv!CE INSPECTION 1, the urdersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of Texas and employed by Hertford Steam Boiler Inso. & Ins. Co.
of Martford, ci have inspected the co@onents described in this Owner's Report during the period to and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or i @ lied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his e@loyer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
Commissions
)UL) !O[N Ins tor's Signature National Board, State, Province, and Endorsements Date V A d' M
1993
- 1 F
)
O CPSES NIS-2 Report Co.
1FW93-015 FORM NIS-2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owner TU Electric Date ' June 2. 1993 (Name)
P.O. Box 1002. Glen Rose. TX 76043 Sheet 2
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56, 5 miles North of Glen Rose. Texas Syn.731 Repair Organization P.O. No., Job No., etc...-
3.
Work Performed by TU ELECTRIC (Name)
Type Code Synbot Stanp N/A P.O. Box 1002 GLEN ROSE. TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4
Identification of System Feedwater Reference N-5 #FW-1-1650 Item Ntaber
- Repaired, Name of Component Manufacturer's Name Nat'l
- Replaced, ASME Code Component identiftcation and Board Year or Stanped Authorizing Other Identificetion Serial Ntsnber No.
Built Replacement (Yes or No)
Doctsnent Description of Uork ITEM:
1 REPLACED THE STEM / DISK ASSEMBLY. (DISK NT #
VALVE A12388).
1FW-0256 ROCKWELL C910010030 AS 722 N/A 1980 REPLACEMENT YES 1-92-002179-00
CPSES NIS-2 Report No.
1FW93-016 FORi! NIS-2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As kequired by the Provisions of ASME Coda Szction XI 1.
Owner TO Electric Date May 21,1993 (Name)
O P.O. Box 1002. Glen Rose. TX 76043 Sheet 1
cf 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit i
Farm Rd. 56, 5 miles North of cien Rose, Texas ST A-731 3.
Work Performed by TU ELECTRIC (Name)
Type Code Symbol Stamp N/A P.O. Box 1002 GtEN ROSE, TX 76043 Authoritation No, N/A (Address)
Expiration Date N/A 4 Identification of System Feedwater Reference N-5 *FW-1-1650 5.
(a) Applicable Construction Code Sec !!!
19 74 Edition, SUMMER 75 Addenda, code Cases N/A (b) Applicable Edition of Section x1 utilized for Repairs or Replacements - 19M, & Addenda, Code Cases N/A 6.
Identification cf Components Repaired or Replaced, and Replacement Components
- Repaired, i
Manufacturer's Name Natal
- Replaced, ASME Code and Board Other Year or Stamped s
Name of Component Serial N mber No.
Identification Built Replacement (Yes or No)
(See pages 2 thru 2 attached) 7.
Description of Work See Attached
?
8.
Tests conducted:
Hydrostatic Pnematic Nominal Operating Pressure Other N/A r
Pressure N/A osi Test Tenp.
N/A
'F 9.
Remarks VALVE IS ASME !!! CODE CLASS 2.
(Applicable Manuf acturer's Data Reports to be attached)
CERTIFICATION OF COMPLIANCE We certify that the statements made in the report are correct and this REPLACEMENT conforms to the rules of the ASME Code,Section XI.
repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No.
N/A Expiration Date N/A Sig k
4W !
d~ A
, 19 b O/
/ Supervisor, Meeh. Codes & Standards Date
'Owne[orOwner'sDesignee, Title CERTIFICATE OF INSERVICE INSPECT!DN i
I, the undersigned, holding a valid comission issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of Texas and employed by Nortford Stesm Boiler Insp. 1 Ins. Co.
of Hartford. Ct have inspected the components described in this Owner's Report during the period to
, and state that l
to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
Comissions YD A3
/O(O
[
Inspec
's Signature" National Board, State, Province, and Endorsements bvAt h
19 D Date
{
O O
CPSES NIS-2 Report to.
1FW93-016 FORM NIS*2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owner TU Etectrie Date May 21. 1993 (Name)
P.O. Box 1002. Glen Rose. TX 76043 Sheet 2
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56. 5 miles North of Glen Rose. Texas ST A.731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC (Name)
Type Code Spbol Stanp N/A P.O. BOX 1002 GtEN ROSE. TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4.
Identification of System Feedwater Reference N-5 #FW-1-1650 Item Nteber
- Repaired, Name of Copponent Manufacturer's Name Nat'l
- Replaced, ASME Code Conponent Identification and Board Year or Stanped Authorizing Other identification Serial Ntrber No.
Built Replacement (Yes or No)
Document Description of Work ITEM:
1 REPLACED DISC / STEM ASSEMBLY. DISC SN # IS VALVE 21945-300 OR 21945-307; OTHER DISC INSTALLED 1FW-0265 ROCKWELL UNDER 1-92-026585-00.
AS 717 N/A 1980 REPLACEMENT YES 1-92-026661 00 l
CPSES NIS*2 Report to.
1FW93-017 FC M NIS-2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owner TU Electric Date May 21, 1993 (Name)
P.0, Box 1002, Glen Rose, TX 76043 Sheet 1
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit i
f arm Rd. 56. 5 miles North of Glen Rose. Texas ST A-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TV ELECTRIC (Name)
Type Code Symbol Stamp N/A P.0, 80x 1002 CLEN ROSE. TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4.
Identification of System Feedwater Reference N-5 #FW-1-1650 5.
(a) Applicable construction Code See III 19 74 Edition, WINTER 74 Addenda, Code Cases N/A (b) Applicable Edition of Section XI Utilized for Repairs or Replacements - 19p6,1 Addenda, Code Cases N/A 6.
Identification of Comonents Repaired or Replaced, and Replacement Components
- Repaired, Manufacturer's Name Nat'l
- Replaced, ASME Code and Board Other Year or Stamped Name of Comonent Serial Number No.
Identification Built Replacement (Yes or No)
(See pages 2 thru 2 attached) 7.
Description of Work See Attnehed O
O O
8.
Tests Conducted:
Hydrostatic Pneumatic Nominal Operating Pressure Other N/A Pressure N/A est Test Tem.
W/A
'F 9.
Remarks VALVE IS ASME III CODE CLASS 2.
(Applicable Manuf acturer's Data Reports to be attached)
CERTIFICATION OF COMPLIANCE We certify that the statements made in the report are correct and this REPLACEMENT conforms to the rules of the ASME Code,Section XI.
repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No.
N/A Erpiration Date N/A N
CV4 M MO
/ Supervisor, Mech. Codes & Standards Date
~
19
$ e I
Odner [ Owner's Designee, Titie CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid conrnission issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of Texas and employed by Hartford Steam Boiler insp. & Ins. Co.
of Hartford, CT have inspected the components described in this Owner's Report during the period to
, and state that to the best of my knowledge and belief, the Owner has perf ormed examinations and taken corrective measures described in this owner's Report in accordance with the requirements of the ASME Code, Section Kl.
By signing this' certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
U 0.
Commissions 7"r v a s fore inspector's Signature National Board, State, Province, and Endorsements
,../
Date hvN ff 19 'D
w CPSES NIS-2 Keport Eo.
1FW93-017 FORM NIS-2 OWNER'S REPORT OF REPA!R OR REPLACEMENT As Required by the Provisions of ASME Code section XI 1.
Owner TU Electric Date May 21. 1993 (Name)
P.O. Box 1002. Glen Rose. TX 76043 Sheet 2
of 2
(Ackfress) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56. 5 miles North of Glen Rose. Texas STA-731 Repair Organization P.O. No., Job No. - etc...
3.
Work Performed by TU ELECTRIC (Name)
Type Code Synbot Stanp N/A P.O. BOX 1002 GLEN ROSE. TX 76043 Authorization No.
SI/A (Address)
Expiration Date N/A 4.
Identification of System Feedwater Reference N-5 #rw-1 1650 Item Nunber
- Repaired, Name of Cenponent Manufacturer's Name Nat'l
- Replaced, ASME Code
'i Conponent identification and Board Year or Stanped Authorizing l
Other Identification serial Nunter No.
Built Replacement (Yes or No)
Docunent Description of Work 9
[
ITEM:
1 REMOVED METAL FROM DISC LEGS BT GRINDING.
i VALVE i
1FW-0076 ROCKWELL 0C4 5198 ND-67 319 1978 REPLACEMENT TES 1-92-026900-00 i
I k
i f
I t
I
CPSES NIS-2 Report No.
1FW94-001 FORM Nis-2 OWNER'S REPC2T OF REPAIR C3 REPLACEMENT As Required by the Provisions of ASME Ccde Section XI j
1.
Owner TU Electric Date January 19, 1994
^
(Name)
I f
P.O. Box 1002, Glen Rose, TX 76043 Sheet 1
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. $6, 5 miles North of Glen Rose Texas ST A-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC (Name)
Type Code Symbol Stamp N/A P.O. Box 1002 GLEN ROSE, TX 76043 Authorization No.
N/A 4
(Address)
Expiration Date N/A 4
Identification of System Feedwater Reference N 5# AF-1-1616 5.
(a) Applicable Construction Code See Ili 19 74 Edition, WINTER 74 Addenda, Code Cases N/A (b) Applicable Edition of Section XI Utilized for Repairs or Replacements - 1916,1 Addenda, Code Cases N/A 6.
Identification of Components Repaired or Replaced, and Replacement Components
- Repaired, Manufacturer's Name Nat'l
- Replaced, ASME Code and Board Other Year or Stanped Name of Co@onent Serial Nmber No.
Identification Built Replacement (Yes or No)
(See pages 2 thru 2 attached) 7.
Description of uork See Attached O
8.
Tests Conducted:
Hydrostatic Pneumatic Nominal Operating Pressure Other N/A h
Pressure N/A psi Test Tem.
W/A
'F 0
9.
Remarks VALVE IS ASME lif CODE CLASS 2.
(Applicable Manuf acturer's Data Reports to be attached)
CERTIFICATION OF COMPLIANCE We certify that the statements made in the report are correct and this REPLACEMENT conforms to the rules of the ASME Code,Section XI.
repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No.
N/A Expiration Date N/A d Y.S Ci [ / Supervisor. Mech. Codes & Standards Date
/-/ Y 19 S n
/
Ownef op/dwner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of Texas and employed by Hartford Steam Boller Insp. & Ins. Co.
of Hartford, CT have inspected the comonents described in this Owner's Report during the period
.haAvarv A ht3 to As. Ma rV 20 lY1'l and state that to the best of my knowledge and belief, the Owner has perfofmed examinations and taken corrective measures described in this owner's Report in accordance with the requirecents of the ASHE Code,Section XI.
By signing this certificate neither the Inspector nor his egloyer makes any warranty, expressed or iglied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
N h.
~
Comissions IXAi
/CMO in c' tor's Signature National Board, State, Province, and Endorsements Date d o,Ma r y 2D 19 %
CPSES NIS-2 Report 8:o.
1FV94 001' FORM NIS-2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owner TO Electric Date January 19. 1994 (Name)
P.O. Box 1002 Glen Rose. TX 76043 Sheet 2
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56. 5 miles North of Glen Rose. Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by YU ELECTRIC (Name)
Type Code Synbot stamp N/A P.O. BOX 1002 GLEN ROSE. TX 76043 Authorization No.
N/A (Address)
Expiration Date N/li 4.
Identification of System Feedwater Reference N $# AF-1-1616 Item NLeber
- Repaired, Name of Conponent Manufacturer's Name Nat'l
- Replaced, ASME Code Conponent Identification and Board Year or Staaped Authorizing other Identification Seriet Nteber No.
Built Replacement (Yes or No)
Doctment Description of Work ITEM:
1 REPLACED $ HINGE PIN RETAINER CAP SCREWS.
VALVE 1FW-0082 ROCKWELL ONE 93-2293 ND-68 320 1978 REPLACEMENT YES 3-93-323565-01 8
,,,,,,,r n
y u.--
w
-e-.sv,w-s--
-e-
<ee-,
een
~n
,-wsmm-wn w.
v-,--n.
m t-e-
-. - < - + ~
-nw-wn -w +a m--
--e~
--m
~ - - - - - - -*
CPSES NIS*2 Riport No.
ins93-011 FORM NIS-2 OWNER'S REPORT OF REPAIR C:t REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owner TU Electric Date May 21.1993 (Name)
(
P.O. Box 1002, Glen Rose TX 76043 Sheet 1
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56, 5 miles North of cien Rose Texes STA-731 3.
Work Performed by TU ELECTRIC (Name)
Type Code Synbol Stanp N/A P.O. BOX 1002 CLIN ROSE. TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4.
Identification of System Main Steam Reference N 5 #MS-1-1648 5.
(a) Applicable Construction Code See III 19 74 Edition, WINTER 74 Addenda, Code Cases N/A (b) Applicable Edition of Section x1 Utilized for Repairs or Replacements 1986,1 Addenda, Code cases N/A 6.
Identification of Conponents Repaired or Replaced, and Replacement Conponents
- Repaired, Manufacturer's Name Nat'l
- Replaced, ASME Code and Board Other Year or Stanped Name of Component Serial NLanber No.
Identification Built Replacement (Yes or No)
(See pages 2 thru 2 attached) 7.
Description cf Work See Attached 8.
Tests Conducted:
O O
Hydrostatic Pneumatic Nominal Operating Pressure Other N/A O
Pressure N/A osi Test Temp.
W/A
'F 9 Remarks VALVE IS ASME !!! CODE CLASS 2.
(Applicable Manufacturer's Data Reports to be attached)
CERTIFICATION OF COMPLIANCE We certify that the statements made in the report are correct and this REPA1R conforms to the rules of the ASME Code,Section XI.
repair or replacement Type Code Synbol Stanp N/A Certificate of Authorization No.
N/A Expiration Date N/A Sig M8/d y*S 6te
/ Supervisor, Mech. Codes & Standards Date NO
,19 k3 r
(
/ Ofer or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Terat and employed by Hartford Steam Boiler Insp. 1 Int. Co.
of Martford, CT have inspected the conponents described in this owner's Report during the period to
, and state that to the best of my knowledge and belief, the owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his enployer makes any warranty, expressed or laptied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his enployer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising frcxn or connected with this inspection.
k-Consniss ions Tf % A 3 /o(0 inspector ignature National Board, State, Province, and Erdorsements Date beAf 4, 19 %
e
CPSES #flS-2 Report to.
1r.593-011 FORM NIS-2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI
- 1. -Owner TU Electric Date May 21. 1993 (Name)
P.O. Box 1002. Glen Rose. TX 76043 Sheet 2
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56. 5 miles North of Glen Rose. Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.- Work Performed by TU ELECTRIC (Name)
Type Code Synbot Stamp N/A P.O. BOX 1002 GtEN ROSE. TX 76043 Authorization No.
M/A (Address)
Expiration Date N/A 4.
Identification of Systeve Main Steam Reference N-5 #NS-1-1648 Item Ntnber
- Repaired, Name of Corponent Manufacturer's Name Nat'l
- Replaced, ASME Code comp 3nent identification and Board Year or Starrped Authorizing other Identification Serial Ntrber No.
Built Replacement (Yes or No)
Document Description of Work ITEM:
1 MACHINED VALVE PLUG.
VALVE 1 PV-2327 FISHER DCN 5281 6560730 5130 1979 REPAIR TES 1-92-028324-00 r
}
CPSES NIS 2 Report No.
1MS93 012 1
F02M NIS 2 DWNER'S REPORT OF REPA!R OR REPLACEMENT I
As Required by the Provisions of ASME CodsSection XI 1.
Owner TV Electric Date May 21, 1993 e
(Name)
[
P.O. Box 1002, Glen Rose. TX 76043 Sheet 1
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit i
Farm Rd. 56, 5 miles North of Clen Rose. Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TV ELECTRIC (Name)
Type Code Symbol Stanp N/A P.O. BOX 1002 CLEN ROSE, TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4.
Identification of System Main Steam Reference N-5 #MS-1-1648 5.
(a) Applicable construction Code Sec III 19 74 Edition, SUMMER 74 Addenda, Code Cases N/A (b) Applicable Edition of Section XI Utilized for Repairs or Replacements - 1986,1 Addenda, Code Cases N/A 8
6.
Identification of Comonents Repaired or Replaced, and Replacement Comonents i
- Repaired, Manufacturer's Name Nat'l
- Replaced, ASME Code and Board Other Year or Stamped Name of Conponent Serial Nunter No.
Identification Built Replacement (Yes or No)
(See pages 2 thru 2 attached) i 7.
Description of Work See Attached O
O O
O 8.
Tests Conducted:
Hydrostatic Pneumatic Nominal Operating Pressure Other N/A Pressure N/A esi Test Temp.
N/A 9
9.
Remarks PIPING 15 ASME !!! CODE CLASS 2.
(Applicaole Manufacturer's Data Reports to be attached)
CERTIFICATION OF COMPLIANCE We certify that the statements made in the report are correct and this REPLACEMENT conforms to the rules of the ASME Code,Section XI.
repair or replacement Type Code symbol Stamp N/A 1
Certificate of Authorization No.
W/A Expiration Date N/A Signed N# odt,
dM
/ Supervisor, Mech. Codes 8 Standards Date 8"db
,19 8 3
/ -~
Ow f or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid comission issued by the National Board of Boller and P essure vessel Inspectors and the State or Province of Texas and enployed by Hartford steam Better Inso. $ Ins. Co.
of Hertford, CT have inspttted the components described in this owner's Report during the period to
, and state that to the best of m/ knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his enployer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his enployer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
M9-Comissions Tt %5 10fD Inspect s Signature National Board, State, Province, and Endorsements bvM I. 19 9 Date 1
)
v CPSES NIS-2 Report No.
1Ms93-012 FORM NIS-2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI i
1.
Owner TU Electric Date May 21. 1993 (Name)
P.O. Box 1002 Glen Rose. TX 76043 Sheet 2
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56. 5 miles North of Glen Rose. Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC (Name)
Type Code Synbot Stanp N/A P.O. BOX 1002 GLEN ROSE. TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4.
Identification of System Main Steam Reference N-5 #MS-1-1648
. Item NLmber
- Repaired, Name of Conponent -
Manufacturer's Name Nat'l
- Replaced, ASME Code Cocponent Identification and Board fear or Stamped Authorizing Other Identification Serial Ntebcr No.
Built Replacement (Yes or No)
Document Description of Work liEM:
1 REPLACED 2 STUDS AND 4 NUTS ON FLANGE.
PIPING BRP-MS-1-RB-012 BROWN & ROOT L
FLANGE #2 N/A
,1984 REPLACEMENT YES 3-92-308385-01 i
i I
r n
[
t l
-)
.,s.._,
-..,, ~
.s
,.m...
CPSES NIS 2 Report No.
1MS93-013 FO'.M NIS 2 OWNER'S REPORT OF REPA1R OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owner TU Electric Date May 25, 1993 e
(Name)
(
P.O. Box 1002 Cten Rose, TX 76043 Sheet 1
of 2
V (Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56, 5 miles North of Glen Rose. Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC (Name)
Type Code Synt)ol Sta@
N/A P.O. BOX 1002 CLEN ROSE, TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4
Identification of System Main Steam Reference N 5 #MS 16/.8 S.
(a) Applicable construction Code See 111 19 74 Edition, WlNTER 74 Addenda, Code Cases N/A (b) Applicable Edition of Section XI Utilized for Repairs or Replacements - 198,6,1 Addenda, Code Cases N/A 6.
Identification of Co m onents Repaired or Replaced, and Replacement Components
- Repaired, Manufacturer's Name Nat'l
- Replaced, ASME Code and Board Other Year or Stamped Name of Component Serial Number No.
Identification Built Replacement (Yes or No)
(See pages 2 thru 2 attached) 7.
Description of Work See Attached O
O O
B.
Tests Conducted:
Hydrostatic Pnewaatic Nominal Operating Pressure Other N/A Pressure N/A Dsl Test Temp.
N/A
'F 9.
Remarks VALVE IS ASMF !!! CODE CL ASS 2.
(Applicable Manufacturer's Data Reports to be attached)
CERTIFICATION OF COMPLIANCE We certify that the statements made in the report are correct and this REPLACEMENT conforms to the rules of the ASME Code,Section XI.
repair or replacement 1
Type Code Symbol Stamp N/A I
Certificate of Authorization No,-
N/A Expiration Date N/A
$1 N ddVS ed
/ Supervisor, Mech. Codes & Standards Date dYb
,19 N i
Oper[rOwner'sDesignee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of Texas and employed by Hartford Steam Boiler insp. & Ins. Co.
of Hartford, CT have inspected the co@ onents described in this Owner's Report during the period to
, and state that to the best of my knowledge and belief, the Owner has perf ormed examinations and taken corrective measures described in this owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or i@lled, concerning the examinations and corrective measures described in th!$ Owner's Report. Furthermore, neither the Inspector nor his e @loyer shall be liable in any manner for any personal injury or property damage or a loss of any kind 6 rising from or connected with this inspection.
O, comissions W OLi /Ol'O Inspe r's signature National Board, State, Province, and Endorsements Date b UAt
[
,19 93
CPSES NIS 2 Report No.
1Ms93-013 FORM NIS-2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owner TU Electric Date May 25. 1993 (Name)
P.O. Box 1002. Glen Rose. TX 76043 Sheet 2
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56, 5 miles North of Glen Rose. Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC (Name)
Type Code SyPbol Stamp N/A P.O. BOX 1002 GLEN ROSE. TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4.
Identification of System Main Steam Reference N-5 8HS-1-1648 I
Item Number
- Repaired, g
Name of Component Manufacturer s Name Nat'l
- Replaced, ASME Code e
r Conponent Identification and Board Year-or Stanped Authorizing Other Identification Serial Nunber No.
Built Replacement (Yes or No)
Doctsnent Description of Work ITEM:
1 REPLACED THE VALVE DISK (S/W 23495-64).
VALVE 1MS-0155 ROCKWELL NO-81 357 1979 REPLACEMENT YES 1-92-002225-00 E
i
'l I
i i
\\
?
I i
l 1,
CPSES N!S-2 Report No.
1"S94-001 i
FORM NIS 2 OWNE2'S REPORT OF REPAIR OR REPLACEMENT I
As Required by the Provisions of ASME Code Section XI j
l 1.
Owner TU Electric Date January 7. 1994 (Name)
P.O. Box 1002. Glen Rose, TX 76043 Sheet 1
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit i
Farm Rd. 56, 5 miles North of Clen Rose Texas ST A-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC (Name)
Type Code Symbol Sta m N/A P.O. 80x 1002 GLEN ROSE TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4
Identification of System Main Steam Reference N-5# MS-1-1648 5.
(a) Applicable Construction Code See !!!
19 74 Edition, WINTER 74 Addenda, Code Cases N/A (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1986, N1 Addenda, Code Cases N/A 6.
Identification of Comonents Repaired or Replaced, and Replacement Components
- Repaired, Manufacturer's Name Natal
- Replaced, ASME Code and Board Other Year or Stamped Name of Cogonent Serial Number No.
Identification Built Replacement (Yes or No)
(See pages 2 thru 2 attached) 7.
Description of Work See Attached 8.
Tests Conducted:
Hydrostatic Pnetsnatic Nominal Operating Pressure Other N/A Pressure N/A csi fest Tem.
N/A
- F 9.
Remarks VALVE IS ASME III CODE CLASS 2.
(Applicable Manufacturer's Data Reports to be attached)
CERTIFICATION OF COMPLIANCE We certify that the statements made in the report are correct and this RE PL ACE ME NT conforms to the rules of the ASME Code,Section XI.
repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No.
W/A Expiration Date N/A S ned M 4Ai M A
/ Supervisor, Mech. Codes & Standards Date 4 /U
, 19 N
/
Owner / Owner's Designee, Title CER11FICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid comission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Texas and egloyed by Hartford Steam Boiler Insp. E Ins. Co.
of Hartford, CT have inspected the components described in this Owner's Report during the period d u vet ev A9. /H3 to &t n us, v fff l%4
, and state that to the best of my knowledge and belief, the Owner has per' formed 6xaminations and taken corfective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his e g loyer makes any warranty, expressed or i mlied, concerning t
the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his e@ loyer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with t is inspection.
di O. 'bl Comissions Tt'% tt 5
/0YO nspector's Signature National Board, State, Province, and Endorsements d A,w qV l#1 19 %
Date
f i\\
\\v/
CPSES NIS-2 Report to.
inso4-001 FORM NIS-2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owner TU Electric Date January 7. 1994 (Name)
P.O. Box 1002. Glen Rose. TX 76043 Sheet 2
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56. 5 miles North of Glen Rose. Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TO ELECTRIC (Name)
Type Code Synbol Stacp N/A P.O. BOX 1002 GLEN ROSE. T*
76043 Authorization No.
N/A (Address)
Expiration Date N/A 4.
Identification of System Main Steam Reference N-58 MS-1-1648 Item Number
- Repaired, Name of Conponent Manufacturer's Name Nat'l
- Replaced, ASME Code Copponent Identification and Board Year or Staaped Authorizing other Identification Serial Ntsnber No.
Built Replacement (Yes or No)
Document Description of Work ITEM:
1 REPLACED PRIMARY PLUG AND PILOT PLUG; NEW S/N VAlbE PRIMARY--LB9566-1 AND PILOT--DC8647-6, 1-PV-2327 FISHER BRP-MS-1-SB-044 6560730 5130 1979 REPLACEMENT YES 1 93-053501 00
CPSES NIS 2 Rtport I:o.
1MS94-002 FCCM WIS 2 OWNER'S REPC:T OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Stetion XI 1.
Owner TV Electric Date January 7, 1994 (Name)
{
P.O. Box 1002, Glen pose. TX 76043 Sheet 1
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56, $ miles North of Glen Rose, Texas ST A-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TO ELECTRIC (Name)
Type Code Symbol Stapp N/A P.O. BOX 1002 CLEN ROSE. TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4.
Identification of System Main Steam Reference N-5# MS-1 1648 5
(a) Applicable Construction Code Sec Ill 19 74 Edition, SUMMER 74 Addenda, Code Cases N/A (b) Applicable Edition of Section XI Utilized for Repairs or Replacements - 1986, NO,, Addenda, Code Cases _ N/A 6.
Identification of Co m onents Repaired or Replaced, and Replacement Components
- Repaired, Manufacturer's Name Nat'l
- Replaced, ASME Code and Board Other Year or Stamped Name of Cogonent Serial Nunber No.
Identification Built Replacement (Yes or No)
(See pages 2 thru 2 attached) 7.
Description of Work See Attached 8.
Tests conducted:
Hydrostatic Pneumatic Nominal Operating Pressure Other N/A Pressure N/A psi fest Temp.
N/A
'F 9.
Remarks PipfNG IS ASME !!! CODE CLASS 2.
(Applicable Manufacturer's Data Reports to be attached)
CERTIFICATION OF COMPLIANCE We certify that the statements made in the report are correct and this REPLACEMENT conforms to the rules of the ASME Code,Section XI.
repair or replacement i
Type Code Symbol Stamp N/A Certificate of Authorization No.
N/A Expiration Date N/A Sig e M//fdW" /[4?
a4
/ Supervisor. Mech. Codes & Standards Date
[M
, 19 b
/
' /p/or Owner's Designee, Title i
CERTIFICATE OF INSERVICE INSPECTION i
I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of Texas and egloyed by Hartford Steam Boller Insp. & Int. Co.
of Hartford, CT have inspected the co@onents described in this owner's Report during the period
.h a,s w r V 2N /964? to d u n t_ #, y R M95/
, and state that to the best of my knowledge and belief, the owner has performed ekamir,ations and taken'corrbctive measures described in this owner's Report'in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
_ Mh, Commissions NXA i /OYO V
f/' nspector's Signature National Board, State, Province, and Endorsements j
s,%M r v R
,19 9 t/
Date s
~
v}
CPSES NIS-2 Report No.'
FORM NIS 2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owner TU Electric Date January 7, 1994 (Name)
P.O. Box 1002 Glen Rose. TX 76043 Sheet 2
of 2-(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56. 5 miles North of Glen Rose. Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC (Name)
Type Code Synbol Startp N/A P.O. BOX 1002 GtEN ROSE. TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4.
Identification of System Main Steam Reference N-58 MS-1-1648 Item Nwber.
- Repaired, Name of Component Manufacturer's Name Nat'l
- Replaced, ASME Code Ccrrponent identification and Board Year or Starrped Authorizing Other Identification Serial Nunber No.
Built Replacement (Yes or No)
Document Descriptimi of Work ITEM:
1 REPLACED 2 STUDS AND 4 NUTS.
PIPING BRP-MS-1-RB-019 BROWN & ROOT FLANGE #2 N/A 1984 REPLACEMENT YES 3-92-308385-01
,_-m
-w
- n
.m.
m c
CPSES NIS-2 Report N3.
1RC93-011 FC2M N!s-2 OWNER'S REPORT OF REPAIR C2 REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owner TU Electric Date May 21, 1993 g
(Name)
P.O. Box 1002, Glen Rose TX 76043 Sheet 1
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56, 5 miles North of Glen Rose, Texas STA-731 3.
Work Performed by TU ELECTRIC (Name)
Type Code Symbol Stamp N/A P.O. BOX 1002 CLEN ROSE, TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4.
Identification of system Reactor Cootant Reference N-5 eRC 1 1645 5.
(a) Applicable Construction Code - See !!!
19 71 Edition, WINTER 72 Addenda, Code Cases N/A (b) Applicable Edition of Section XI utilized for Repairs or Replacements a 19M, N0_ Addenda, Code Cases N/A 6.
Identification of Components Repaired or Replaced, and Replacement Conponents
- Repaired, Manufacturer's Name Nat'l
- Replaced, ASME Code and Board Other Year or Stanped Name of Component Serial Nmber No.
Identification Built Replacement (Yes or No)
(See pages 2 thru 2 attached) 7.
Description of Work See Attached 8.
Tests Conducted:
Hydrostatic Pneumatic Nominal Operating Pressure Other N/A Pressure N/A osi Test Temp.
N/A
'F 9.
Remarks REACTOR VESSEL IS ASME !!! CODE CLASS 1.
(Applicable Manufacturer's Data Reports to be attached)
CERTIFICATION OF COMPLIANCE We certify that the statements made in the report are correct and this REPLACEMENT conforms to the rules of the ASME Code,Section XI.
repair or replacement Type Code Synbol Stamp N/A Certificate of Authorization No.
N/A Expiration Date N/A S
h d t/.I
'y
/ Supervisor, Mech. Codes E Standards Date b*f 19 N i
Owner /or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid comission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Texas and employed by Nartford Steam Boller Inso. & Ins. Co.
of Hartford, CT have inspected the components described in this owner's Report during the period to
, and state that to the best of ny knowledge and belief, the Owner has perf ormed examinations and taken corrective measures described in this owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his enployer makes any warranty, expressed or inplied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his enployer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
O, Commissions 7i%M / c'fD inspecCr's Signature National Board, State, Province, and Endorsements Date ht>AP
[
1973
a v
CPSES NIS-2 Report Co.
IRC93-011 FORM NIS-2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owwr TU Electric Date May 21. 1993 (Name)
P.O. Box 1002. Glen Rose. TX 76043 Sheet 2
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm ad. 56, 5 miles North of Glen Rose. Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC (Name)
Type Code Syebol Starp N/A
__P.O. BOX 1002 GLEN ROSE. TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4.
Identification of System Reactor Coolant Reference N-5 sac-1-1645 i
Item Nteter Repaired.
Name of Conponent Manufacturer's Name Nat'l
- Replaced, ASME Code Component Identification and Board Year or Stanped Authorizing Other identification Serial Ntaber No.
Built Replacement (Yes or No)
Doctnent Description of Work ITEM:
'1 STUD HOLE #6 WAS MODIFIED BY MACHINING AND REACTOR VESSEL INSTALLATION OF A THREAD INSERT SLEEVE. REF:
TBX-RCPCRV-01 COMBUSTION ENG.
ONE 92-1251 DCN 5188.
10773 22187 1977 REPLACEMENT YES 1-92 027873-00
'l
CPSES NIS-2 Rtport No.
1RC93 012 FORM NIS 2 OWNER'S REPORT OF REPA!R OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owner TU Electric Date May 21. 1993 (Name)
O P.O. Box 1002. Cten Rose, fx 76043 Sheet 1
of 2
(Address) 2.
Plant Comanebe Peak Steam Electric Station (CPSES)
Unit 1
Farm ed. 56, 5 miles North of Cten Rose. Texas ST A-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC (Name)
Type Code Symbol Sta@
N/A P.O. BOX 1002 CLEN ROSE. TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4
Identification of System Reactor Coolant Reference N 5 #RC-1-1645 5.
(a) Applicable construction Code See !!]
19 71 Edition, SUMMER 73 Addenda, Code Cases N/A (b) Applicable Edition of Section XI Utilized for Repairs or Replacements
- 1986, N_0, Addenda, Code Cases N/A Q
6.
Identification of Corponents Repaired or Replaced, and Replacement Co@onents
- Repaired, Manufacturer's Name Nat'l
- Replaced, ASME Code and Board Other Year or Staged Name of Conponent Serial Number No.
Identification Built Replacement (Yes or No)
(See pages 2 thru 2 attached) 7.
Description of Work See Attached 8.
Tests Conducted:
O Hydrostatic Pnetanatic Nominal Operating Pressure Other N/A
{
Pressure N/A osi Test Temp.
N/A
'F 9.
Remarks STEAM CENERATOR IS ASME Ill CODE CLASS 1.
(Applicable Manufacturer's Data Reports to be attached) w CERTIFICATION OF COMPLIANCE We certify that the statements made in the report are correct and this REPLACEMENT conforms to the rules of the ASME Code,Section XI.
repair or replacement Type Code Symbol Stamp N/A Certificate of Authorization No.
N/A Expiration Date N/A Sign DlbV5 k, W
/ Supervisor. Mech. Codes & Standards Date 8b
,19 f3 L
~ /0wprorOwner'sDesignee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid comission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Texas and employed by Hartford Steam Boiler Insp. S Ins. Co.
i of Hartford, Ct have inspected the components described in this owner's Report during the period to
, and state that to the best of ny knowledge and belief, the Owner has perf ormed examinations and taken corrective measures described in this owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or igiled, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
M bi Comiss ions N XA3
/Md inspe r's Signature Nationat Board, State, Province, and Eneorsements Date bf I, 19 %
A h
I U
V V
l CPSES NIS-2 Report No.'
1RC93-012 FORM NIS-2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owner
'TU Electric Date May 21. 1993 (Name)
P.O. Box 1002. Glen Rose. TX 76043 Sheet 2
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56. 5 miles North of Glen Rose. Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC (Name)
Type Code Sywbot Stanp N/A P.O. Box 1002 GLEN ROSE. TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4
Identification of System Reactor Cootent Reference N-5 #RC-1-1645 Item Nwber Repaired.
.l Name of Component Manufacturer's Name Nat'l
- Replaced, ASME Code g
j Conponent Identification and Board Year or Stacped Authorizing Other Identification Serial Ntrber No.
Built Replacement (Yes or No)
Document Description of Work liEM:
1 REPLACED NUT ON THE #12 STUD ON THE HOTLEG STEAM GENERATOR MANWAY. (S/N OF kUT 149).
TBX-RCPCSG-02 WESTINGHOUSE 2192 W18586 1978 REPLACEMENT YES 3-92-318223-01 m.--..m.
l
+ 6 m
h
'w.i 9
CPSES NIS*2 Riport No.
1DC94 001 FORM NIS 2 OWNER'S REPD:tT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code section XI 1.
Owner TV Electric Date January 20, 1994
,A (Name)
P.O. Box 1002. Clen Rose. TX 76043 Sheet 1
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56. 5 miles North of Glen Rose. Temas ST A-731 Repair Organization P.O. No., Job No., etc...
3.
Work Perf orned by TU ELECTRIC (Name)
Type Code Symbol Stamp N/A P.O. BOW 1002 GLEN ROSE. TX 76043 Authoritation No.
N/A (Address)
Expiration Date N/A 4.
Identification of System Reactor Coolant Reference N-58 RC-1-1645 5.
(a) Applicable Construction Code Sec !!!
19 71 Edition, WINTER 72 Addenda, Code Cases N/A (b) Applicable Edition of Section XI Utilized for Repairs or Replacements - 198p, !!O,,, Addenda, Code Cases N/A 6.
Identification of Conponents Repaired or Replaced, and Replacement Conponents
- Repaired, Manufact rer's Name Nat'l
- Replaced, ASME Code and Board Other Year or Stanped Name of Component Serial Ntsnber No.
Identification Built Replacement (Yes or No)
(See pages 2 thru 2 attached) 7.
Description of Work See Attached 8.
Tests Conducted:
O Hydrostatic Pnetsnatic Nominal Operating Pressure Other N/A Pressure N/A psi Test Temp.
W/A
'T 9.
Remarks REACTOR VESSFL IS ASME 11! CODE CtASS 1 (Applicable Manufacturer's Data Reports to be attached) 4 CERTIFICATION OF COMPLIANCE hr We certify that the statements made in the report are corrcet and this REP /REPt y
conforms to the rules of the ASME Code,Section XI.
repair or replacement Type Code Symbol Stamp N/A Certificate of AuthorlZation No.
N/A Expiration Date N/A ned N v/J c6
/ Supervisor Merh. Codes E Standards Date b AO 19 fY I
Ownier p'0wner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid conunission issued by the National Board of Boller and Pressure vessel Inspectors and the State or Province of Texas and enptoyed by Hartf ord Steam Bolter Insp. & Ins. Co.
of Hartford CT have inspected the conponents described in this Owner's Repor t during the period Ack A i,/ Arv.2l"I fW3 to.hAA ut W lo.fQ %
, and state that to the best of ny knowledge and belief, the Owner has performed eximinations and take6 corrdctive measures described in this owner's Report in accordance with the requirements of the ASME Coce,Section XI.
By signing this certificate neither the Inspector nor his enployer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his enployer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this
- spection, b.
Cons;.issions M K A k [O N I
clor's Signature National Board, State, Province, and Endorsements b (L MA/' V AD,19 @f Date
O CPSES NIS 2 Report No.
1RC94-001 FORM NIS 2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Pequired by the Provisions of ASME Code Section XI 1.
Owwr TV Electric Date January 20. 1994 (Name)
P.O. Box 1002. Glen Rose. TX 76043 Sheet 2
of
?
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Ferm Rd 56, 5 miles North of Glen Rose, tevas ST A-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TV ELECTRIC (Neme)
Iype Code 5ytrbol $ tarp N/A P.O. Box 1002 GLEN ROSE. TX 76043 Authorization No.
N/A
( AcMress)
Dpiration Date N/A 4
Identification of System Reactor Cootent Reference N 58 RC-1-1645 Item Ntsrber
- Repaired, Name of Corponent Manufacturer's Name Nat'l
- Replaced, ASME Code Cceponent identification and Board Year or Stanped Authorizing Other Identification Serial Ntrber No.
Built Replacement (Yes or No)
Doctanent Description of Work ITEM:
1 MACHINED THREADS OFF OF STUD #7. REPLACED STUD REACTOR VESSEL
- 25. REMOVED DAMAGED THREADS FROM STUD HOLES TBX-RCPCRV-01 COMBUSTION ENG.
DCW 3510/0NE 93-687
- 11, AND #25. S/N FOR STUD;S-1, NUT;5-1, AND 10773 22187 1977 REP /REPL YES C910005178 WASHER;S-1.REF ONE 93-1854 FOR STUD / HOLE #17
t CPSES NIS-2 Report No.
1SF04-001 FCC1 NIS-2 OWNER'S REPORT OF REPAIR C3 REPLACEMENT As Required by the Provisions of ASME Code Ssction XI 1
TO Electric Date January 7, 1994' O. Owner (Name)
P.O. Box 1002, Glen Rose, TX 76043 Sheet 1
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56, 5 miles North of Glen Rose Texas STA-731 Repair Organization P.O. No., Job No., etc.,
3.
Work Performed by TU ELECTRIC (Name)
Type Code Symbol Stanp N/A l
P.0, BOX 1002 CLEN ROSE. TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A
}
4 Identification of System Spent Fuel Pool Cooling Reference N 5# SF-1-1579 j
5.
(a) Applicable construction Code See ill 19 74 Edition, SUMMER 76 Addenda, Code Cases N/A j
(b) Applicable Edition of Section XI utilized for Repairs or Replacements - 1916,1 Addenda, Code Cases N/A 6.
Identification of Components Repaired or Replaced, and Replacement Components
- Repaired, Manufacturer's Name Nat'l
- Replaced, ASME Code and Board Other Year
. or Stamped Name of Component Serf ul NLsnber No.
Identification Built Replacement (Yes or No) i (See pages 2 thru 2 attached) i 7.
Description of Work See Attached l
l O
O 8.
Tests conducted:
Hydrostatic Pneumatic Wominal Operating Pressure Other N/A Pressure N/A psi Test Temp.
N/A
- I,
s 9.
Remarks PUMP IS ASME !!! CODE CLASS 3.
( Applicable Manuf acturer's Data Reports to be attached)
CERTIFICAT!DN OF COMPT!ANCE We certify that the statements made in the report are correct and this REPLACEMENT conforms to the rules of the ASME Code,Section XI.
repair or replacement f
Type Code Symbol Stamp N/A i
Certificate of Authorization No.
N/A Expiration Date N/A
)
S g'ne NN4 Md
/ Supervisor, Mech. Codes 8 Standards Date
//8
,19N
/
Omeg/or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure vessel Inspectors and the State or Province of Texas and enployed by Hartford Steam Boiler InsD. E Int. Co.
of Hartford CT have inspected the components described in this Owner's Report during the period n a n us w N Tit 41to l e r rarv 19 V1'f 4 and state that l
to the best of my knowledge and belief, the owner has performed exaMnations and taken cor'rective measures described in r
this owner's Report in accordance with the requirements of the ASME Code,Section XI.
i By signing this certificate neither the Inspector nor his enployer makes any warranty, expressed or ipplied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or l
connected with this i spection.
i
( Ce TLb Commissions WY A 5
/OTU in tor's Signature National Board, State, Province, and Endorsements j
Date beAAW l#f
, 19 1'1 i
l 1
\\
I CPSES NIS-2 Report No.
1SF94-001 FORM N!S-2 0WER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owner TU Electric Date January 7. 1994~
~
(Name)
P.O. Box 1002. Glen Rose. TX 76043 Sheet 2
of 2
( Ackfress) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56. 5 miles North of Glen Rose. Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC (Name)
Trpe Code Symbol Stapp N/A P.O. Box 1002 GLEN ROSE. TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4.
Identification of System Spent Fuel Pool Cooling Reference N-5# SF-1-1579 Item Ntsber
- Repaired, Name of Conponent Manufacturer's Name Nat'l
- Replaced, ASME Code Conponent identification and Board Year or Stanped Authorizing Other Identification Serial Ntaber No.
Built Replacement (Tes or No)
Doctsnent Description of Work 1 TEM:
1 REPLACED THE SEAL GLAND; INBOARD SEAL GLAND PUMP HEAT #34099 AND OUTBOARD SEAL GLAND HEAT CPX-SFAPSF-01 BINGHAM WILLIAMETTE
- 31115. DRILLED AND REAMED THE LOWER CASING BRP-SF-x-FB-017s 16210463 NS-661 1979 REPLACEMENT TES 1-93-033110 FOR RED 0 WELLING.
i l
l l
I l
t
CPSES Nis-2 Report ::o.
1S194-001 FORM NIS 2 OWNER'S REPORT OF REPAIR C3 REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owner TU Electric Date January 13, 1994
[
(Name)
P.O. Box 1002 Glen Rose, TX 76043 Sheet 1
of 2
(
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56. 5 miles North of Glen Rose, Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC (Name)
Typt Code Symbol Stamp N/A P.O. BOX 1002 GLEN ROSE TX 76043 Autho,12ation No.
N/A (Address)
Expiration Date N/A 4.
Identification of System Safety Iniection Reference N-5# SI-1-16/.4 5.
(a) Applicable Construction Code See III 19 74 Edition, SUMMER 74 _ Addenda, Code Cases N/A (b) Applicable Edition of Section XI utilized for Repairs or Replacements - 19M,1 Addenda, Code Cases N/A 6.
Identification of Components Repaired or Replaced, and Replacement Components
- Repaired, Manufacturer's Name Nat'l
- Replaced, ASME Code and Board Other Year or Stanped Name of Conponent Serial Ntsnber No.
Identification built Replacement (Yes or No)
(See pages 2 thru 2 attached) 7.
Description of Work See Attached 8.
Tests Conducted:
0 Hydrostatic Pneumatic Nominal Operating Pressure Other N/A Pressure N/A osi Test Tenp.
N/A
'F 9.
Remarks PIPING IS ASME Ill CODE CLASS 2.
( Applicable Manuf acturer's Data Reports to be attached)
CERTIFICATION OF COMPLIANCE We certify that the statements ma6 in the report are correct and this REPAIR conforms to the rules of the ASME Cod,Section XI.
repair or replacement j
Type Code Symbol Stamp N/A Certificate of Authorization No.
N/A Expiration Date N/A ed @87ayi 6V
/ Supervisor, Mech. Codes & Standards Date
/- d 19 N
/Dj6erorOwner'sDesignee, Title i
i l
CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid comission issued by the National Board of Botter and Pressure Vessel Inspectors and the State or Province of Texas and employed by Hartford Steam Boller Inso. & Ins. Co.
of Hartford, CT have inspected the componenta described in this Owner's Report during the period
.V n o_ m *19 ed to & An v W l(I #4
, and state that-
)
C to the best of my knowledge and belief, the Owner has performed exiuninations and taken corr'ective measures described in this owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his
)
enptoyer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or j
connected with this inspection.
~
/ h.
Comissions NM s /CVO
(
nspector's Signature National Board, State, Province, and Endorsements d a A U.i g l *)
. 19 Pi Date i
1
-l
CPSES NIS-2 Report No.
15194-001-FORM NIS-2 OMER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Cection XI 1.
Owner TU Electric Date January 13. 1994 (Name)
P.O. Box 1002. Glen Rose. TX 76043 Sheet 2
of 2
(Address) 2.
Plant Comanche Peak Steem Electric Station (CPSES)
Unit 1
Farm Rd. 56. 5 miles North of Glen Rose. Texas STA-731 Repair Organization P.O. No., Job No...etc...
3.
Work Performed by TU ELECTRIC (Name)
Type Code Synbol Stanp N/A P.O. BOX 1002 GLEN ROSE. TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4.
Identification of System Safety inlection Reference N $a SI-1-1644 Item Nw ber
- Repaired, Name of Copponent Manufacturer's Name Nat'l
- Replaced, ASME Code Corponent Identification and Board Year or Stamed Authorizing Other Identification Serial Nwber No.
Built Reptacement (Yes or No)
Doctanent Description of Work ITEM:
1 WELD PREP FOR ISI BY GRINDING. MINIMUM WALL PIPING VIOLATION, USE AS IS PER ONE 93-2087.
SI-1-050-1501R-2 BROWN & ROOT ONE 93-2316 B2P-SI-1 SB-022 (W-14)
N/A 1984 REPAIR YES 1-92-029753-00
CPSES NIS-2 Report No.
FO2M NIS-2 OWNER'S REPORT OF REPAIR OR REPLACEMENT
'i As Required by the Provisions of ASME Coda Section XI l
' 1.
Owner TU Electrie Date January 19. 1994 (Name)
(
P.O. Box 1002, Glen Rose, TX 76043 Sheet 1
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Pd. 56. 5 miles North of Glen Rose, Texas STA-731 3.
Work Performed by TV ELECTRIC (Name)
Type Code Symbol Stanp N/A P.O. BOX 1002 CLEN ROSE, TX 76043 Authorization No.
N/A
[
(Address)
Expiration Date N/A 4.
Identification of System Safety inlection Reference N-5# S!-1-1644 5.
(a) Applicable Construction Code Sec !!!
19 74 Edition, SUMMER 74 Addenda, Code Cases 1553-1 (b) Applicable Edition of Section XI Utilized f or Repairs or Replacements - 1986,1 Addenda, Code Cases N/A 6.
Identification of Components Repaired or Replaced, and Replacement Components
- Repaired, I
Manufacturer's Name Watet
- Replaced, ASME Code and Board Other Year or Stanped i
Name of Component Seriet NLanber No.
Identification Built Replacement (Yes or No)
(See pages 2 thru 2 attached) 7.
Description of Work See Attached i
O O
O 8.
Tests Conducted:
Hydrostatic Pneumatic Nominal Operating Pressure Other N/A 1
Pressure N/A psi Test Temp.
N/A
'F 9.
Remarks VALVE IS ASME !!! CODE CLASS 2.
( Applicable Manuf acturer's Data Reports to be attached) l l
CERTIFICATION OF COMPLIANCE We certify that the statements made in the report are correct and this REPLACEMENT conforms to the rules of the ASME Code,Section XI.
repair or replacernent Type Code Symbol Stamp N/A 1
Certificate of Authorization No.
N/A Expiration Date N/A ned [88[dy'J 4#
/ Supervisor, Mech. Codes & Standards Date
/ If 19 N
' Oper or Owner's Designee, litte CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Bolter and Pressure Vessel Inspectors and the State or Province of Texas and employed by Hartford Steam Boiter Insp. & Ins. Co.
of Martford, CT have inspected the components described in this Owner's Report during the period h va.ev M 1 % 3 to A u w/ o v.td 14 W
, and state that to the best of my knowledge and belief, the Owner has perfofmed' examinations and taken' corr'ective measures described in this owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a toss of any kind arising from or connected with this inspection.
t Comissions TD(Ai /0[O nspector's Sig5ature National Board, State, Province, and Endorsements kwsty 20 19 984 Date
p xm
(
U CPSES NIS-2 Report No.
15194-C02=
FORM NIS-2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1,
owner 70 Electric Date January 19, 1994 (Name)
P.O. Box 1002. Glen Rose. TX 76043 Sheet 2
of 2
(Address) 4 2.
Plant Comanche Peak Steam Electric Statico (CPSES)
(Jnit 1
_ __ Farm Rd. 56. 5 miles North of Glen Rose. Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Perfortned by TU ELECTRIC (Name)
Type Code Sy6t Stanp N/A P.O. BOX 1002 GLEN ROSE. TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4
Identification of System safety iniection Reference N-58 S1-1-1644 Itesa Ntster
- Repaired, Name of Conponent Manufacturer's Name Nat'l
- Replaced, ASME Code Corponent Identification and Board Year or Stanped Authorizing Other Identification Seriet Ntsber No.
Built Replacement (Yes or No)
Doctsnent Description of Work ITEM:
1 REPLACED VALVE DISC; NEW DISC S/N 6899.
VALVE 1-58218 WESTINGHOUSE 5740005 W11272 1977 REPLACEMENT YES 1-93-045921-00
, ~ _ - _..
~
CPSES NIS 2 Report N3.
1SW3 002 FORM NIS-2 OWNER'S REPORT OF REPA!R OR REPLACEMENT As Required by th2 Provisions of ASME Code Section XI 1.
Owner 70 Electric Date _ January 15. 1993 lO (Name)
P.O. Box 1002, Glen A>se, TX 76043 Sheet 1
cf 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56. 5 miles North of Clen Rose, Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TU ELECTRIC (Name)
Type Code Synbol Stanp N/A P.O. 80x 1002, GLEN ROSE. TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4.
Identification of System Service Water Reference N 5 *sW-1-1634 5.
(a) Applicable Construction Code See III 19 77 Edition, WINTER 78 Ackienda, Code Cases N/A (b) Applicable Edition of Section XI Utilized for Repairs or Replacements - 1986, N,0_ Addenda, Code Cases N/A 6.
Identification of Components Repaired or Replaced, and Replacement Conponents
- Repaired, Manufacturer's Name Watet
- Replaced, ASME Code and Board Other Year or Stanped Name of Conponent Serial Nurber No.
Identification Built Replacement (Yes or No)
(See pages 2 thru 2 attached) 7.
Description of Work See Attached 8.
Tests Conducted:
Hydrostatic Pneumatic Nominal Operating Pressure Other h/A h
Pressure N/A Dsl Test Tenp.
N/A
'F V
9.
Remarks VALVE IS ASME III CODE CLASS 3.
(Applicable Manuf acturer's Data Reports to be attached)
I CERTIFICATION OF COMPLIANCE We certify that the statements made in the report are correct and this PEPLACEMENT conforms to the rules of the ASME Code,Section XI.
repair or replacement Type Code symbol Stamp N/A Certificate of Authoritation No.
N/A Expiration Date N/A S
S N4Y3 Su/M NYet psc si (ok s 5%dah Date l-M 19 93 jewher dr Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION I, the urdersigned, holding a valid connission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Teras and enployed by Nortford Steam Boiler insp. 8 Ins. Co.
of Martford, CT have inspected the components described in this owner's Report during the pcriod to
, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the Inspector nor his enployer makes any warranty, expressed or inplied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his enployer shalt be liable in any manner for any personal injury or property damage or a toss of any kind arising from or connected with this inspection.
d.1 O N b A Connissions W Y^ 5 /OYO
(
Inspector's gnature National Board, State, Province, and Endorsements bNuv ?S,19 %
Date l
1
CPSES #15-2 Report Ns.
15w93-002 FORM NIS-2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Section XI 1.
Owwr TU Electric Date January 15. 1993 (Name)
P.O. Box 1002, Glen Rose. TX 76043 Sheet 2
of 2
(Address) 2.
Plant Cmenche Peek Steam Electric Station (CPSES)
Unit 1
Farm Rd. 56. 5 milles North of Glen Rose. Texas STA-731 Repair Organization P.O. No., Job Mo., etc...
3.
Work Performed by TV ELECTRIC (Name)
Type Code Synbcl Starp N/A P.O. BOX 1002. CLEN ROSE. TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4.
Identification of System Service Water Reference N 5 #sv-1-1634 Itera Ntaber
- Repaired, Name of Component Manufacturer's Name Nat'l Replaced.
ASME Code Conponent Identification and Board Year or Stapped Authorizing other Identification Serial Ntsber No.
Built Replacement (Tes or No)
Docunent Description of Work ITEM:
1 REPLACED VALVE PLATE SET.
VALVE ISV-0374 TRW MISSION MFG.
1-4650 N/A 1978 REPLACEMENT YES 3-92-321551-01 l
l l
t t
1 CPSES NIS-2 RIport No.
F00M NIS-2 OWNER'S REPC3T OF REPAIR OR REPLACEMENT As Required by the Provisions of ASME Code Saction XI 1.
Owner TU Flectric Date May 21.1993 r
(Name)
P.0, Bou 1002, Glen Rose. TX 76043 Sheet 1
of 2
g (Address) 2.
Plant Comanche Peak Steam Electric Stetton (CPSE S)
Unit 1
l
_ Farm Rd. 56, 5 miles Worth of Glen Rose Texas STA-731 3.
Work Performed by TU ELFCTRIC (Name)
Type Code Sytnbot Stanp N/A P.O. BOX 100? GLEN ROSE, TX 76043 Authorfration No.
N/A (Address)
Expiration Date N/A 4.
Identification of System Service Water Reference N-5 *SW-1 1634 5.
(a) Applicable Construction Code See !!!
19 74 Edition, WINTER 74 Addenda, Code Cases N/A (b) Applicable Edition of Section XI Utilized for Repairs or Replacements - 19pp, 1 Addenda, Code Cases N/A 6.
Identification of Conponents Repaired or Replaced, and Replacement Components
- Repaired, Manufacturer's Name Nat'l
- Replaced, ASME Code and Bosrd Other Year or Stanped Name of Conponent Serial Number No.
Identification Built Replacement (Yes or No)
(See pages 2 thru 2 attached) 7.
Description of Work See Attached 8.
Tests Conducted:
O O
Nydrostatic Pnemat ic Nominal Operating Pressure Other N/A Pressure N/A psi Test Tenp.
N/A
'F 9.
Remarks PUMP 15 ASME Ill CODE CLASS 3.
(Applicable Manufacturer's Data Reports to be attached)
CERT!f! CATION OF COMPLIANCE We certify that the statements made in the report are correct and this REPLACEMENT conforms to the rules of the ASME Code,Section XI.
repair or replacement Type Code Synbot Stamp N/A Certificate of Authorization No.
W/A Expiration Date N/A sign DVJ
/7
/ Supervisor, Mech. Codes & Standards Date b- !
19 h
i
/ OWher or Owner's Designee, litle CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid conmission issued by the National Board of Boller and Pressure Vesset inspectors and the State or Province of Texas and enployed by Hartford Steam Boller Insp. & Inc. Co.
of Hartford, CT have inspected the conponents described in this Owner's Report during the period to and state that to the best of my knowlodge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.
By signing this certificate neither the inspector nor his enployer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his enployer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.
N ha b
Connissions Tf E A 5 /9 N Ins or's Signature National Board, State, Province, and Endorsements Date dvM E
19., #13_,
i
O U^
CPSES NIS-2 Report to.
15w93-005 FORM NIS-2 OWNER'S REPORT OF REPAIR OR REPLACEMENT As RegJired by the Provisions of ASME Code Section XI 1.
Owner TU Electric Date Mey 21. 1993 (Name)
P.O. Box 1002. Glen Rose. TX 76043 Sheet 2
of 2
(Address) 2.
Plant Comanche Peak Steam Electric Station (CPSES)
Unit 1
Fane Rd. 56. 5 miles North of Glen Rose. Texas STA-731 Repair Organization P.O. No., Job No., etc...
3.
Work Performed by TO ELECTRIC (Name)
Type Code Sywbol Stanp N/A P.O. BOX 1002 GtEN ROSE. TX 76043 Authorization No.
N/A (Address)
Expiration Date N/A 4.
Identification of System Service Water Reference N-5 asW-1-1634 Item Ntaber
- Repaired, Name of Corponent Manufacturer's Name Nat'l
- Replaced, ASME Code Co monent Identification and Board Year or S tarped Authorizing l
Other Identification Serial Ntrber No.
Built Replacement (Yes or No)
Document Description of Work f
ITEM:
1 MODIFIED PUMP SUPPORT FOR LOCKWIRE AND PUMP REPLACED SUPPORT BOLTING. REF: ONE 931473.
CP1 SWAPSU 01 HAYWARD TYLER DCW 5136 817401 3*
'978 REPLACEMENT YES 1-92-028315-00 I
..