ML20054L838
| ML20054L838 | |
| Person / Time | |
|---|---|
| Site: | Mcguire, McGuire  |
| Issue date: | 06/30/1982 |
| From: | Parker W DUKE POWER CO. |
| To: | Adensam E, Harold Denton Office of Nuclear Reactor Regulation |
| References | |
| RTR-NUREG-0588, RTR-NUREG-588 IEB-79-01B, IEB-79-1B, NUDOCS 8207080521 | |
| Download: ML20054L838 (274) | |
Text
. _ _ _ _ ___ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
DUKE POWEH COMI%NY Powsu llutwswo 422 Sourn Cucacu STurer. CuAnwTre. N. C. ::a242 WIL LI AM O PA R M E R. J R.
ViC F Ppt $tDFNT T E L E P*=C N E: AREA 7C4 cem P.ooucem~ June 30, 1982 373-4083 I
Mr. Ilarold R. Denton, Director Office of Nuclear Reactor Regulation ;
I U. S. Nuclear Regulatory Commission l
Washington, D. C. 20555 Attention: Ms. E. G. Adensam, Chief Licensing Branch No. 4 Re: McGuire Nuclear Station Docket Nos. 50-369, 50-370
Dear Mr. Denton:
Attached are 15 copies of our updated response to NUREG-0588 for McGuire Nuclear Station. Major changes to previous submittals are:
- 1) Inclusion of Unit 2 information
- 2) Addition of information on equipment in annulus
- 3) Revised format to improve usability of the document
- 4) Addition of Main Steam Isolation System as noted in McGuire Unit 1 Equipment Qualification SER, Paragraph 3.1.
The accident environments indicated for each equipment type are the worst cases for Units 1 and 2. Where specific differences exist between Unit 1 and 2 equip-ment, separate entries have been made for each unit.
Please advise if there are additional questions regarding this matter.
Very truly yours, C
OL u- u &.
William O. Parker, Jr l
GAC/php Attachments cc: (w/ attachment)
Mr. James P. O'Reilly Mr. P. R. Bemis Regional Administrator Senior Resident Inspector U. S. Nuclear Regulatory Commission McGuire Nuclear Station Region 11
- 101 Marietta Street, Suite 3100 .
.iclanta, Georgia 30303 [ , .
D i # g2d( J 8207080521 820630 @ l PDR ADOCK 05000369 Ll P PDR
..N' Mr. liarold R. Denton, Director June 30, 1982 Page 2 bec: (w/o attachment)
K. S. Canady N. A. Rutherford M. D. McIntosh J. E. Cole M. A. Susinno Section File: MC-801.01 (w/ attachment)
Al Figuerou (MNS)
Sherry Grier (MNS)
Larry Weaver (MNS)
T. P. Ilarrall (5 copies)
D. B. Blackmon
McGuire Nuclear Station - Unit I and Unit 2 Environmental qualification of Class 1E Equipment NRC letters dated October 15, 1979 and February 15, 1980 conce rning 'the environmental qualification of Class 1E equipment defined the NRC Staff's requirements with respect to NUREG 0588, Interim Staff Position on Environmental Qualification of Safety-Related Electrical Equipment. Basically, the Staff's requirements were as follows:
- 1) Provide a table listing by generic type all Class IE equipment including the appropriate qualification data for the equipment. The information requirements were provided in the Staff's October 15, 1979 letter.
- 2) Review the adequacy of the environmental qualification for the equipment identified in item I above with respect to the Staff's position described in NUREG 0588, document the degree of conformance, and Justify any deviations.
Further, the NRC issued a Memorandum and Order on May 23, 1980 establishing NUREG 0588 as the requirement which appilcants must meet in order to satisfy General Design Criterion 4 relating to the environmental qualification of Class 1E equipment.
In response to the NRC Staff's requests for information in this matter, Duke Power Company is providing the following:
N Attachment 1 - Summary of Environmental qualification of Class 1E Equipment Located inside Containment Attachment 2 - Summary of Environmental qualification of Class IE Equipment Located in the Annulus Attachment 3 - Summary of Environmental Qualification of Class IE Equipment Located Outside Containment and Exposed to HELB Environment Attachment 4 - Summary of Environmental Qualification of Class 1E Equipment Located Outside Containment and Exposed to the Post-LOCA Recirculation Radiation Environment Attachment 5 - Duke Power Company Position on the Category II Guidelines of NUREG 0588 Attachment 6 - Comparison of the Environmental Qualification of Class 1E
( Equipment Located inside Containment to the Duke Position on the Category II j Guidelines of NUREG 0588 -
l
)
l O
. Attachment 7 - Comparison of the Environmental Qualification of Class IE Equipment Located in the Annulus to the Duke Position on the Category II Guide 1Ines of.NUREG 0588 Attachment 8 - Comparison of the Environmental Qualification of Clasis 1E Equipment Located Outside Containment and Exposed to HELB Environment to the Duke Position on the Category II Guidelines of NUREG 0588 Attachment 9 - Comparison of the Environmental Qualification of Class IE Equipment Located Outside Contai nment and Exposed to the Post-LOCA Recirculation Radiation Environment to the Duke Position on the Category II GuideIInes of NUREG 0588 Attachments I, 2, 3, and 4 provide the tabular listing of Class IE equipment exposed to a harsh environment and includes appropriate qualification data for the equipment. Attachments 5, 6, 7, S, and 9 document the degree of conformance of the equipment qualification programs with the Category II guidelines of NUREG 0588.
O O
ma...,na a # -. m-+m m ----4,-a.4 _h-_4 hw5 -%._. 4 erme -e Js~=a--a -6E--*A- h- ++.---=*-e .W.a_ w.a._ am_. 4A,.m,a A_al
- A uat,-A, L
l j
l, ATTACHMENT 1
SUMMARY
OFENVIRONMENTALQUALIFICATIONOFCLASS1EEQUIPM5NT LOCATED INSIDE CONTAINMENT 4
Page Rev. M Rev. Pm Rev.
l 1 0 2 0 3 0 4 0 i 5 0 .
6 0
, 7 0 8 0 l 9 1 10 1 11 0 12 0
, 13 0 14 0 <
I 15 0 16 0 17 0 18 0 19 0 ,
i 20 0 '
- 21 0 i 22 0 4 23 0 ,
24 0 25 0 26 0
- 27 0 l
28 0 1
29 0 30 0 31 0 32 0 33 0 34 0 1
35 0 36 0 ,
37 0 38 0
'EL40101T/1 - 6/10/82 Rev. I
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 1 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED INSIDE CONTAINMENT EQUIPMENT ID: Transmitter - Pressurizer MANUFACTURER: Barton MODEL #: 763 (Lot 2)
, (1) Pressure (Lower Containment) 1 (Unit 1) a ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (2) QUALIFIED ACCIDENT (% OF SPAN) (% OF SPAN)
ENVIRONMENT (3)
Temp: 327 F Temp: 380 F SI Initiation 5 minutes +10% Max. Error 7.7%
Press: 14.8 psig Press: 75 psig (<5 min.) post DBE (5 min.)
RH: 100% RH: 100%
Rad: 2.5X106R Rad: SX107R Chem Spray: N/A Chen Spray: Boric acid and sodium hydroxide soln.
2750 3pm Boron 8.5 pl QUALIFICATION REPORT (4): WCAP 9885 METHOD: Test EL40101T/2 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 2 SUPNARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED INSIDE CONTAINMENT EQUIPMENT ID: Transmitter - Pressurizer MANUFACTURER: Barton MODEL #: 764 (Lot 2)
(1) Level (Lower Containment)
(Unit 1)
ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY .
ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (2) QUALIFIED ACCIDENT (% OF SPAN) (% OF SPAN)
ENVIRONMENT (3)
Temp: 327 F Temp: 380 F 2 weeks 4 months i 25% Max. Error 15%
Press: 14.8 psig Press: 75 psig post DBE post DBE RH: 100% RH: 100%
Rad: 1.4X10 7R Rad: SX107R Chem Spray: Boric Chem Spray: Boric acid and sodium acid and sodium tetraborate soln. hydroxide soln.
2750 ppm Baron 8.5 pH
~
i l
{
QUALIFICATION REPORT (4): WCAP 9885 l
METHOD: Test EL40101T/3 - 4/13/82
{
O O O McGUIRE NUCLEAR STATIO - UNITS 1 AND 2 Page 3 SUMARY OF ENVIRONMENTAL QUALIFICATION 0F CLASS 1E EQUIPMENT Rev. O LOCATED- IMSIDE CONTAINMENT EQUIPMENT ID: Transmitter - 5/G Level (NR) MANUFACTURER: Barton MODEL #: 764 (Lot 2)
(1) (Lower Containment)
(Unit 1)
ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (2) QUALIFIED ACCIDENT (% OF SPAN) (% OF SPAN)
ENVIRONMENT (3)
Temp: 327 F Temp: 380*F Reactor trip 4 months Trip Funct on: <+5% (5 min)
Press: 14.8 psig Press: 75 psig (<5 min.) post DBE +5% (5 min)
RH: 100% RH: ^100% Plus 4 months Rad: 2.3X10 7R Rad: SX107R post DBE PAM Function: Max Error 15%
Chem Spray: Boric Chem Spray: Boric i 25% (4 mo) (4 mo) acid and sodium acid and sodium tetraborate soln. hydroxide soln. (Note 5) 2750 ppm Boron 8.5 pH QUALIFICATION REPORT (4): WCAP 9885 METHOD: Test EL40101T/4 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 4 SulttARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED INSIDE CONTAINMENT EQUIPMENT ID: Transmitter - RCS Flow MANUFACTURER: Veritrak MODEL #: 59DP (1) (Lower Containment)
(Unit 1)
ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONFENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (2) QUALIFIED ACCIDENT (% OF SPAN) (% OF SPAN)
ENVIRONMENT (3) l The RCS flow signals are not required for accidents that cause a change in the normal containment operating environment.
I I
QUALIFICATI0K REPORT (4): N/A METil00: N/A EL40101T/5 - 4/13/82 l
- O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 5 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED INSIDE CONTAINMENT EQUIPMENT ID: Transmitter - Pressurizer MANUFACTURER: Barton MODEL #: 763 (Lot 5) i (1) Pressure (Lower Containment) l (Unit 2) '
ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (2) QUALIFIED ACCIDENT (% OF SPAN) (% OF SPAN) i ENVIRONMENT (3)
! Temp: 327*F (Note 6) SI Initiation (Note 6) +10% (Note 6)
Press: 14.8 psig (<5 min.)
RH: 100%
Rad: 2.5X106R Chen Spray: N/A QUALIFICATION REPORT (4): (Note 6)
METHOD: (Note 6)
EL401011/6 - 4/13/82 h
O O O l
McGUIRE NUCLEAR STATION - UNITS 1 ANO 2 Page 6 l Rev. O l SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT
! LOCATED INSIDE CONTAINMENT l
EQUIPMENT ID: Transmitter - Pressurizer MANUFACTURER: Barton MODEL #: 764 (Lot 5)
(1) Level (Lower Containment)
(Unit 2) 1 ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (2) QUALIFIED ACCIDENT (% OF SPAN) (% OF SPAN) l ENVIRONMENT (3)
Temp: 327 F (Note 6) 2 weeks (Note 6) 125% (Note 6)
Press: 14.8 psig post DBE RH: 100%
Rad: 2.5X108R Chea Spray: Boric acid and sodium tetraborate soln.
QUALIFICATION REPORT (4): (Note 6)
METHOD: (Note 6)
EL40101T/7 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 7 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED INSIDE CONTAINMENT EQUIPMENT ID: Transmitter - 5/G Level (NR) MANUFACTURER: Barton MODEL #: 764 (Lot 5)
(1) (Lower Containment)
(Unit 2)
ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ACCIDENT TO WHICH DEMONSTRATED REQUIRED DEMONSTRATED ENVIRONMENT REQUIRED IN ACCIDENT (% OF SPAN) (% OF SPAN)
(2) QUALIFIED ENVIRONMENT (3) l l
l Temp: 327 F (Note 6) Reactor trip (Note 6) Trip Function: (Note 6)
Press: 14.8 psig (<5 Minutes) +5% (5 Minutes)
Ril: 100%
Rad: 2.3X107R Plus 4 months PAM Function:
i Che:a Spray: Boric post DBE 125% (4 months) acid and sodium tetraborate soln.
QUALIFICATION REPORT (4): (Note 6)
METHOD: (Note 6)
EL40101T/8 - 4/13/82
i O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 8 SIMtARY OF ENVIRONMENTAL QUALIFICATION OF CLASS lE EQUIPMENT Rev. 0 LOCATED INSIDE CONTAINMENT EQUIPHENT ID: Transmitter - RCS Flow MANUFACTURER: Barton MODEL f: 764 (1) (LowerContainment)
(Unit 2)
ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (2) QUALIFIED ACCIDENT (% OF SPAN) (% OF SPAN)
ENVIRONMENT (3)
The RCS flow signals are not required for accidents that cause a change in the normal containment operating environment.
QUALIFICATION REPORT (4): N/A METHOD: N/A EL40101T/9 - 4/13/82
o O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 9
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. 1 LOCATED INSIDE CONTAINMENT EQUIPMENT ID: RTD - RCS Temperature (NR) MANUFACTURER: Rosemount MODEL #: 176 KF (1) (Lower Containment)
ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED l (2) QUALIFIED ACCIDENT (% OF SPAN) (% OF SPAN) l ENVIRONMENT (3)
Temp: 327 F Temp: 332 F Reactor Trip 5 minutes 10.2% 10.2%
Press: 14.8 psig Press: 66 psig (<5 min.) post SLB RH: 100% RH: 100%
Rad: 1X108R Rad: 1X108R Chem Spray: N/A Chem Spray: Boric I acid and sodium hydroxide soln.
1.146 wt % Boric acid 8.5 pH QUALIFICATION REPORT (4):
WCAP 9157 and Duke letter Parker to Denton dated December 19, 1979 METHOD: Test / Analysis NOTE: These RTD's will be replaced on Unit 1 within 10 years unless it can be shown that EPR is a non-critical material. y (See DPCo's response to Supplement 5 of the McGuire Unit 1 SER).
EL40101T/10 - 6/10/82
V' i. _ / V McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 10
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. 1 LOCATED INSIDE CONTAINMENT EQUIPMENT ID: RTO - RCS Temperature (WR) MANUFACTURER: Rosemount MODEL #: 176 KS (1) (Lower Containment)
ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (2) QUALIFIED ACCIDENT (% OF SPAN) (% OF SPAN)
ENVIRONMENT (3)
Temp: 327 F Temp: 332 F 2 weeks 2 weeks 0.2% 0.2%
Press: 14.8 psig ' Press: 66 psig post DBE post DBE RH: 100% RH: 100%
Rad: 1X108R Rad: 1X108R Chem Spray: Boric Chem Spray: Boric acid and sodium acid and sodium tetraborate soln. hydroxide soln.
1.46 wt. % Boric acid 8.5 pH QUALIFICATION REPORT (4): WCAP 9157 and Duke letter Parker to Denton dated December 19, 1979 METHOD: Comparison to Model 176 KF, Test / Analysis NOTE: Duke Power Company will replace the Unit 1 RTD's during the first refueling outage. (See DPCo's response to Supplement 5 of the McGuire Unit 1 SER). 1 EL40101T/11 - 6/10/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 11 SUP9tARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED INSIDE CONTAINMENT EQUIPMENT ID: Excore Neutron Detectors MANUFACTURER: W IGTD MODEL #: WL-23686 (1) (Power Range)
(Lower containment)
ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WillCH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (2) QUALIFIED ACCIDENT (% OF SPAN) (% OF SPAN)
ENVIRONMENT (3)
The power range neutron detectors are not required for accidents that cause a change in the r.ormal containment operating environment.
l l
l
{
QUALIFICATION REFORT.(4): N/A ,
METHOD: N/A EL401011/12 - 4/13/82
l O O O 1 1 McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 12 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED INSIDE CONTAINMENT EQUIPMENT ID: Electric Hydrogen MANUFACTURER: W Sturtevant MODEL #: A (1) Recombiner (UpperContainment)
ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ACCIDENT TO WHICH DEMONSTRATED REQUIRED DEMONSTRATED ENVIRONMENT REQUIRED IN (2) QUALIFIED ACCIDENT (% OF SPAN) (% OF SPAN)
ENVIRONMENT (3)
Temp: 180*F Temp: 309 F 3 months 1 year N/A N/A Press: 14.8 psig Press: 62 psig post LOCA post LOCA RH: 100% RH: 100%
Rad: 8.1X107R Rad: 2X108R Chem Spray: Boric Chem Spray: Boric acid and sodium acid and sodium tetraborate soln. hydroxide soln.
2500 ppm Boron 10 pH QUALIFICATION REPORT (4): WCAP 7820 and Supplements 1-4, WCAP 7709-L and Supplements 1-4 i
HETHOD: Test EL40101T/13 - 4/13/82
, t-s .
s , .
/ y
( i. ,
i f 3 '
i 8 .,
'. \ '
z.
McGUIRE NUCLEAR STATION - UNITS 1 AND 2 '
Page'13 !!!
SUMMARY
OF ENVIRONMENTAL QUALIFICATIOM OF CLASS 1E EQUIPMENT
,' Rev.70 3.
1 LOCATED INSII)E CONTAINNENT ,
t
- y n~
T - , , g. . .
LQUIPMLNTID: Containment Air HANUFACTJRER:
Joy /keliance MODEL #: 2XF-336081 e (1) Return Fan. Mot:rs -
s 1 (Upper Conta hnent) s i
t ACCIDENT ENVIRONMEMT OPERABILITY OPERABILITY ACCURACY . ACCURACY ENVIRONMENT TO WHICil r "iEQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (2) QUALIFIED . ' ACCIDENT (% OF SPAN) (% OF SPAN)
, ,. ENVIRONMENT (3) ,
i
's , ,
Temp: 180 F Temp: 330 F ', 2,w nths 1 year N/A N/A t 4
' g.
Pren: 14.3 psig j Press: 85 psig, ~
post DBEt ,
post DBE '
/
(' IH:
~ '
RH: 100% 100%
t~
3 ,
s Rad: 07.6XWR Radt 1X109R ' t
- r Chem Sp?ay:'80ric Chem Spray: Boric - N - 1 :,'
acid and sodium' acid and sodium ,
s t
tetraborate soln. , hydroxide soln. '
x
).
4 3000 ppm Toron, 10.5 pH - s -
's
, ii '
! j ^ y t , , ,.
1 . .
,'r ,
s F 1
\ QUALIFICATION REPORT ,(4): Test Report FF-142E2 and Supplemental Technical Paper TA-4081, Test Re'part X-604, Ter' Report l '
NUC-9, and Supplement 4/14/80 4
7 , x ?
y ,_
.t .q .~ .,
\
} $ s 4 g METHOD: Test EL40101T/14 - 4/13/82 0. .
1i t
a ____ ___ _ _
.t O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 14 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED INSIDE CONTAINMENT EQUIPMENT ID: Hydrogen Skimmer MANUFACTURER: Joy / Reliance MODEL #: 1 YF-882315 (1) Fan Motors (Upper Containment)
ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WilICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (2) QUALIFIED ACCIDENT (% OF SPAN) (% OF SPAN)
ENVIRONMENT (3)
Tezp: 180 F Temp: 330 F 2 months 1 year N/A N/A Press: 14.8 psig Press: 85 psig post DBE post DBE RH: 100% RH: 100%
Rad: 7.6X107R Rad: 1X10*R Chem Spray: Boric Chem Spray: Boric acid and sodium acid and sodium tetraborate soln. hydroxide soln.
3000 ppm Boron, 10.5 pil QUALIFICATION REPORT (4): Test Report FF-14282 and Supplemental Technical paper TA-4081, Test Report X-604, Test Report NUC-9 and Supplement 4/14/80 METil00: Test EL40101T/15 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 15
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED INSIDE CONTAINMENT EQUIPMENT ID: Valve Motor MANUFACTURER: Rotork HODEL #: 7 NA1, 11 NA1, 14 NA1, (1) Operators 16 NA1, 90 NA1 (Lower Containment)
ACCIDENT ENVIRONHLNT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (2) QUALIFIED ACCIDENT (% OF SPAN) (% OF SPAN)
ENVIRONMENT (3)
Temp: 327*F Temp: 340 F 5 min. 30 days N/A N/A Press: 14.8 psig Press: 75 psig (Notes 7 and 8) post DBE RH: 100% RH: 100%
Rad: 6.7X107R Rad: 2X108R Chem Spray: Boric Chem Spray: Boric acid and sodium acid and sodium tetraborate soln. hydroxide soln.
10,000 ppm Boric acid 7-9pH QllALIFICATION REPORT (4): Test Reports N11/4, December 1970; TR 116, October 1973; TR 222, June 1975 METHOD: Test EL4010lT/16 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 16 SUP9tARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED INSIDE CONTAINMENT EQUIPMENT ID: Valve Motor MANUFACTURER: Limitorque MODEL #: SMB (1) Operators (Upper Containment)
ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (2) QUALIFIED ACCIDENT (% OF SPAN) (% OF SPAN)
ENVIRONMENT (3)
Temp: 180 F Temp: 340 F 5 min. 30 days N/A N/A '
Press: 14.8 psig Press: 105 psig (Notes 7 and 8) post DBE RH: 100% RH: 100%
Rad: 4X106R Rad: 2X108R Chem Spray: Boric Chem Spray: Boric acid and sodium acid and sodium tetraborate soln. hydroxide soln.
3000 p)e Boron, 10.5 pl QUALIFICATION REPORT (4): Limitorque Test Report: B0058, January 11, 1980 METHOD: Test EL4010lT/17 - 4/13/82
O O O l
l
~
McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 17 ,
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED INSIDE CONTAINHENT MANUFACTURER: Valcor MODEL #: V526, V573 EQUIPMENT ID: Valve Solenoid (1) Operators (Lower Containment)
ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY TO WHICll DEMONSTRATED REQUIRED DEMONSTRATED ENVIRONMENT REQUIRED IN (2) QUALIFIED ACCIDENT (% OF SPAN) (% OF SPAN)
ENVIRONMENT (3)
Te:p: 327 F Temp: 346 F Operate upon 31 days N/A N/A receipt of a I Press: 14.8 psig Press: 113 psig post DBE Ril: 100% Ril: 100% safety signal Rad: 7.5X107R Rad: 2X108R Chem Spray: Boric Chem Spray: Boric acid and sodium acid and sodium tetraborate soln. hydroxide soln.
1720-2200 ppm Boron 9.5-10.5 pil l
l QUALIFICATION REPORT (4): Test Reports QR-52600-515 and QR-57300-5220-1-1, October 31, 1977 and May 15, 1979 l
l METil0D: Test EL40101T/18 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 18
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED INSIDE CONTAINMENT EQUIPMENT ID: Valve MANUFACTURER: Valcor MODEL #: V70900-21-1, V70900-21-3 (1) Solenoid Operators (Lower Containment)
ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WilICH REQUIRED IN DEMONSIRATED REQUIRED DEMONSTRATED (2) QUALIFIED ACCIDENT (% OF SPAN) (% OF SPAN)
ENVIRONMENT (3)
Temp: 327 F Temp: 346 F Operate upon 31 days N/A N/A Press: 14.8 psig Press: 113 psig receipt of a post DBE
, Ril: 100% RH: 100% safety signal Rad: 7.5X10 7R Rad: 2X108R Chem Spray: Boric Chem Spray: Boric acid and sodium acid and sodium tetraborate soln. hydroxide soln.
1720-2200 ppm Boric acid 9.5-10.5 pH QUALIFICATION REPORT (4): Test Reports QR-52600-515, Rev. B; QR-70900-21-1, Rev. A; MR-70905-21-3-1 MEll100: Test & similarity EL40101T/19 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 19 SuitiARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED INSIDE CONTAINMENT EQUIPMENT ID: Containment Air Return MANUFACTURER: Rotork MODEL #: 11NAZ1 (1) Isolation Damper Motor (Upper Containment)
ACCIDENT ENVIRONMENT OPERABILITY CPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (2) QUALIFIED ACCIDENT (% OF SPAN) (% OF SPAN)
ENVIRONMENT (3)
Terp: 180 F Temp: 340 F 5 min. (max) 30 days N/A N/A Press: 14.8 psig Press: 75 psig post DBE post DBE RH: 100% RH: 100%
Rad: 8.1X105R Rad: 2X10sR Chem Spray: Boric Chem Spray: Boric acid and sodium acid and sodium tetraborate soln. hydroxide soln.
10,000 ppm Boric acid, 7-9 pH QUALIFICATION REPORT (4): Test Report N11/4, December 1970; Test Report TR116, October 1973 METHOD: Test EL40101T/20 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 20
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED INSIDE CONTAINMENT EQUIPMENT ID: Valve Solenoid MANUFACTURER: ASCO MODEL #: HP8316E34E, NP8316E36E (1) Operators (Lower Containment)
ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (2) QUALIFIED ACCIDENT (% OF SPAN) (% OF SPAN)
ENVIRONMENT (3)
Temp: 327 F Temp: 346*F Operate upon 30 days N/A N/A Press: 14.8 psig Press: 110 psig receipt of safety post DBi.
Ril: 100% RH: 100% signal Rad: 7.5X107R Rad- 2X108R Chem Spray: N/A Chem Spray: Boric acid and sodium hydroxide soln.
3000 ppm Boron.
9.5-10.5 pil QUALIFICATION REPORT (4): Test Report AQS21678/TR METHOD: Test EL40101T/21 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 21 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED INSIDE CONTAINMENT EQUIPMENT ID: Valve Solenoid MANUFACTURER: Target Rock MODEL #: 77CC Model (1) Operators (Lower Containment)
ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (2) QUALIFIED ACCIDENT (% OF SPAN) (% OF SPAN)
ENVIRONMENT (3)
Temp: 327 F Temp: 385 F (Note 9) 14 days N/A N/A Press: 14.8 psig Press: 66 psig post DBE RH: 100% RH: 100%
Rad: 5.7X107R Rad: 1.3x10 8R -
i Chem Spray: Boric Chem Spray: Boric acid and sodium acid and hydrazine tetraborate soln. 6200 ppm Boric acid 8.6-10 pH l
l QUALIFICATION REPORT (4): Test Report 2375, 9/26/79 l
METHOD: Test EL40101T/22 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 22 Su MARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED INSIDE CONTAINHENT EQUIPMENT ID: Differential Pressure Switch MANUFACTURER: Solon MODEL #: 7PSIADW (1) for Damper Control (Upper Containment)
ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (2) QUALIFIED ACCIDENT (% OF SPAN) (% OF SPAN)
ENVIRONMENT (3)
Temp: 140 F Temp: 150 F 1 min. 5 min. t 0.5 psig 1 0.3 psig Press: 14.8 psig Press: 15 psig post DBE post DBE RH: 100% RH: 100%
Rad: 8.1X105R Rad: 2.1X108R Chem Spray: Boric Chem Spray: Boric acid and sodium acid and sodium
, tetraborate soln. tetraborate soln.
l 2000-4000 ppm Boron 4.7 pH I
QUALIFICATION REPORT (4): Test Report A293-80, Test Report A294-80 l
METHOD: Test EL40101T/23 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 23
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED INSIDE CONT."NMENT EQUIPMENT ID: Electrical MANUFACTURER: D.G. O'Brien MODEL #: Types A,B,C,0,E,F,G,H,J,K, (1) Penetrations L,M, cathodic protection (Lower Containment) penetration and spares (Note 10)
ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (2) QUALIFIED ACCIDENT (% OF SPAN) (% OF SPAi:)
ENVIRONMENT (3)
Temp: 327 F Temp: 340 F 4 months 4 months N/A N/A Press: 14.8 psig Press: 15 psig post DBE post DBE RH: 100% RH: 100%
Rad: 8.5X107R Rad: 2X108R t Chea Spray: Boric Chem Spray: Boric acid and sodium acid and sodium l tetraborate soln. hydroxide soln.
(Note 11) 4000 ppm Boron, 8.8 pH QUALIFICATION REPORT (4): Test Reports ER-247, ER-252, and ER-227 METil00: Test / Analysis EL40101T/24 - 4/13/82 ,
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 24 SU MARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED INSIDE CONTAINMENT EQUIPMENT ID: Cable Control, Instrumentation, MANUFACTURER: Okonite MODEL #: EP Insulation l (1) and 2KV power (Lower Containment)
ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (2) QUALIFIED ACCIDENT (% OF SPAN) (% OF SPAN)
ENVIRONMENT (3)
Terp: 327 F Temp: 345 F 30 days 130 days N/A N/A Press: 14.8 psig Press: 104 psig post DBE post DBE RH: 100% RH: 100%
Rad: 6.7X107R Rad: 2X108R Chem Spray: Boric Chem Spray: Boric acid and sodium acid, sodium tetraborate soln. hydroxide and sodium thiosulfate soln.
3000 ppm Baron 10.5 pH QUALIFICATION REPORT (4): Test Reports FN-1, N-1, G-3, 110E, and 141 METHOD: Test EL40101T/25 - 4/13/82
O O O l
McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 25 StTriMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED INSIDE CONTAINHENT EQUIPMENT ID: Cable - MANUFACTURER: Okonite MODEL #: Tefzel 280 Insulation (1) Instrumentation (Lower Containment)
ACCIDENT ENVIRONMENT OPERABILITY 0?ERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DE>iONSTRATED REQUIRED DEMONSTRATED (2) QUALIFIED ACCIDENT (% OF SPAN) (% OF SPAN)
ENVIRONMENT (3)
Temp: 327 F Temp: 341*F 4 months 130 days N/A N/A Press: 14.8 psig Press: 112 psig post DBE RH: 100% RH: 100%
Rad: 8.5X107R Rad: 2X108R Chem Spray: Boric Chem Spray: Boric acid and sodium acid, sodium tetraborate soln. hydroxide and sodium thiosulfate soln.
3000 ppm Baron, 10.5 pH QUALIFICATION REPORT (4): Test Report K-0-1, September 1979 METHOD: Test EL40101T/26 - 4/13/82
O O O i
McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 26
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED INSIDE CONTAINMENT EQUIP."' T ID: Cable - MANUFACTURER: Anaconda MODEL #: EP Insulation and
( Control and 2KV Power EP/Hypalon Insulation (Lower Containment)
ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED ,
(2) QUALIFIED ACCIDENT (% OF SPAN) (% OF SPAN)
ENVIRONMENT (3)
Terp: 327 F Temp: 346 F 3 months 4 months N/A N/A Press: 14.8 psig Press: 113 psig post DBE post DBE RH: 100% RH: 100%
Rad: 9X107R Rad: 2X10sR Chem Spray: Boric Chem Spray: Boric acid and sodium acid, sodium tetraborate soln. hydroxide and sodium thiosulfate soln.
3000 ppm Boron 10.5 pH QUALIFICATION REPORT (4): Test Reports F-C4350-2 and F-C4350-3, and Supplement METHOD: Test EL40101T/27 - 4/13/82
- O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 27 SUP94ARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. 0 LOCATED INSIDE CONTAINMENT EQUIPMENT ID
- Cable - MANUFACTURER: Brand Rex MODEL #: XLPE Insulation (1) Control
! (Lower Containment)
ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WilICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (2) QUALIFIED ACCIDENT (% OF SPAN) (% OF SPAN)
ENVIRONMENT (3)
Temp: 327 F Temp: 346 F 30 days 120 days N/A N/A Press: 14.8 Press: 113 psig post DBE post DBE RH: 100% psig RH: 100%
Rad: 7.5X107R Rad: 2X108R Chza Spray: Boric Chem Spray: Boric acid and sodium acid and sodium tetraborate soln. hydroxide soln.
6200 ppm Boron 10 pH QUALIFICATION REPORT (4): Test Reports FC5120-1 and FC5120-3 METHOD: Test EL40101T/28 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 28
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED INSIDE CONTAINMENT EQUIPMENT ID: Cable - MANUFACTURER: Samuel Moore MODEL #: EP/Hypalon Insulation (1) Instrumentation (Lower Containment)
ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO MlICll REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (2) QUALIFIED ACCIDENT (% OF SPAN) (% OF SPAN)
ENVIRONMENT (3)
Temp: 327 F Temp: 340*F 30 days 30 days N/A N/A Press: 14.8 psig Press: 105 psig post DBE post DBE RH: 100% RH: 100%
Rad: 7.5X107R Rad: 2X108R Chea Spray: Boric Chem Spray: Boric acid and sodium acid and sodium l tetraborate soln. hydroxide soln.
2000 p)m Boron, 9-11 p1 l QUALIFICATION REPORT (4): Test Report F-C3683 l METHOD: Test I
l EL40101T/29 - 4/13/82
O o O 6
McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 29 SUNIARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. 0 LOCATED INSIDE CONTAINMENT EQUIPMENT ID: Cable Termination / MANUFACTURER: Raychem MODEL #: WCSF-N Sleeves and (1) Splice Material Breakouts (Lower Containment)
ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (2) QUALIFIED ACCIDENT (% OF SPAN) (% OF SPAN) l ENVIRONMENT (3)
Temp: 327 F Temp: 357 F 4 months 4 months N/A N/A Press: 14.8 psig Press: 70 psig post DBE post DBE Ril: 100% RH: 100%
Rad: 8.5X107R Rad: 2X108R Chea Spray: Boric Chem Spray: Boric acid and sodium acid and sodium tetraborate soln. hydroxide soln.
3000 ppm Boron, 10.5 pH QUALIFICATION REPORT (4): Test Reports F-C4033-3 and 71100 METHOD: Test / Analysis EL40101T/30 - 4/13/82
1 O .
O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 30 SUINARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED INSIDE CONTAINMENT EQUIPMENT ID: Stem-Mounted Limit MANUFACTURER: NAMC0 MODEL #: EA 180, EA 740 (1) Switches (Lower Containment)
ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (2) QUALIFIED ACCIDENT (% OF SPAN) (% OF SPAN)
ENVIRONMENT (3)
Temp: 327 F Temp: 340 F 5 min 30 days N/A N/A Press: 14.8 psig Press: 63 psig (Note 8) post DBE RH: 100% RH: 100%
Rad: 6.7X107R Rad: 2X108R Chem Spray: Boric Chem Spray: Boric acid and sodium acid and sodium tetraborate soln. hydroxide soln.
3000 ppm Boron, 10.5 pH QUALIFICATION REPORT (4): Namco Test Reports dated September 5, 1978 and February 22, 1979 METHOD: Test EL40101T/31 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 31 SU MARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED INSIDE CONTAINMENT EQUIPMENT ID: Seal Material for MANUFACTURER: 3M MODEL #: Scotch Cast 9 (XR-5240)
(1) Cable Entrance Fittings (Lower Containment)
ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (2) QUALIFIED ACCIDENT (% OF SPAN) (% OF SPAN)
ENVIRONMENT (3)
Temp: 327 F Temp: 340 F 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> 12 days N/A N/A Press: 14.8 psig Press: 15 psig post DBE RH: 100% RH: 100%
Rad: 6.7X107R Rad: 2X108R Chem Spray: Boric Chem Spray: Boric .
acid and sodium acid and sodium tetraborate soln. hydroxide soln.
4000 ppm Boron, pH not available QUALIFICATION REPORT (4): Test Report 44390-1, Rev. A METHOD: Test / Analysis EL40101T/32 - 4/13/82 l
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 32
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED INSIDE CONTAINMENT EQUIPMENT ID: Containment Radiation MANUFACTURER: General Atomic MODEL #: RD-23 Ionization (1) Monitors-High Range Chamber (Lower Containment)
ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (2) QUALIFIED ACCIDENT (% OF SPAN) (% OF SPAN)
ENVIRONMENT (3)
Temp: 240 F Temp: 315*F 2 weeks 18 days Note 13 Note 13
, Press: 14.8 psig Press: 70 psig post LOCA post LOCA RH: 100% RH: 100%
Rad: 8X107R Rad: Note 12 Chem Spray: Boric Chem Spray: Boric acid and sodium acid and sodium tetraborate soln. thiosulfate and sodium hydroxide, i 3000 ppm Boron j 10.5 pil l
QUALIFICATION REPORT (4): Test Report E-254-960 dated May 1, 1981 METil00: Test / Analysis EL40101T/33 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 33 SUPNARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED INSIDE CONTAINMENT EQUIPMENT ID: Cable for Containment MANUFACTURER: Rockbestos MODEL #: RSS-6-104 (1) Radiation Monitors - High Range (LowerContainment)
ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (2) QUALIFIED ACCIDENT (% OF SPAN) (% OF SPAN)
ENVIRONMENT (3)
Temp: 240*F Temp: 315*F 2 weeks 1 year N/A N/A Press: 14.8 psig Press: 70 psig post LOCA post LOCA RH: 100% RH: 100%
Rad: 8X107R Rad: 2X108R Chem Spray: Note Chem Spray: Boric 14 acid and sodium thiosulfate and sodium hydroxide 3000 ppe Boron.
10.5 pH QUALIFICATION REPORT (4): Test Report E-254-960 dated May 1, 1981, (Note 15)
METil00: Test EL40101T/34 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 34 SUINARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED INSIDE CONTAINMENT EQUIPMENT ID: Acoustical Valve Position MANUFACTURER: TEC MODEL #: 1414 (1) Monitors-accerometers, charge converters and cables (Lower Containment)
ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (2) QUALIFIED ACCIDENT (% OF SPAN) (% OF SPAN)
ENVIRONMENT (3) l l Temp: 327 F (Note 16) 2 weeks (Note 16) N/A (Note 16) l Press: 14.8 psig post DBE RH: 100%
I Rad: 8X107R Chem Spray: Boric acid and sodium tetraborate soln.
QUALIFICATION REPORT (4): (Note 16) l METil00: (Note 16)
EL40101T/35 - 4/13/82 1
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 35
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED INSIDE CONTAINMENT EQUIPMENT ID: Reactor Vessel MANUFACTURER: Westinghouse MODEL #: RVLIS (1) Level Instrumentation System (Lower Containment)
ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (2) QUALIFIED ACCIDENT (% OF SPAN) (% OF SPAN)
ENVIRONMENT (3) j The qualification information for the In-Containment portions of this system will be provided in a future revision of this submittal following review by Duke Power Company.
QUALIFICATION REPORT (4): N/A METHOD: N/A EL40101T/36 - 4/13/82
i Page 36 Revision 0 MCGUIRE NUCLEAR STATION - UNITS 1 AND 2 ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUlr 4ENT LOCATED INSIDE CONTAINMENT Note 1 All equipment identified in this table is located inside the containment, specifically in the lower compartment except for the electric hydrogen recombiner, containment air return fan motors, hydrogen skimmer fan motors, containment air return isolation damper motors, differential pressure switches for damper control, Limitorque valve motor operators and cables associated with these devices.
Note 2 The parameters that compose the overall worst-case containment accident environment are as follows:
Temperature (Upper Containment): 180F peak; time history as shown in FSAR Figure 6.2.1-24 (Rev. 36).
Temperature (Lower Compartment): 327F peak; time history as shown in FSAR i Supplement 1, Q042.73, Figure 7 Revision 39.
l p)
Pressure (Upper and Lower Compartment):
shown in FSAR Figure 6.2.1-23 (Rev. 36).
14.8 psig peak; time history as Relative Humidity: 100%
Radiation: Total integrated radiation dose for the equipment location includes 40 year normal operating dose plus the appropriate accident dose (except for the narrow-range and wide-range RTD's).
Chemical Spray: Boric acid and sodium tetraborate spray resulting from l mixing in the containment sump of borated water from the RWST and sodium i tetraborate solution from ice bed melt. Concentrations are as follows:
l Initial Spray: 2000 - 2100 ppm Boron 4.0 - 4.7 pH l
l Recirculation Spray: 1800 - 2200 ppm Boron 6.0 - 10.0 pH Note 3 Equipment operability requirements in the containment accident environment are as identified in FSAR Table 3.11.1-1 (Rev. 25).
Note 4 Environmental Qualification test reports for the following equipment have g previously been submitted to the NRC Staff:
EL40101T/37 - 4/13/82
Page 37 Revision 0 Transmitter-Barton (by Westingnouse)
RTD's-Rosemount (by Westinghouse)
Electric Hydrogen Recombiner (by Westinghouse)
Containment Air Return Fan Motors (by Duke)
Hydrogen Skimmer Fan Motors (by Duke)
Solenoid Operators-Valcor (by Duke)
Electric Penetrations (by Duke)
Cable Termination / Splice Material (by Duke)
Stem-Mounted Limit Switches (by Duke)
Cable Entrance Seal Material (by Duke)
Note 5 A requirement for McGuire is to limit the positive error for the trip function of narrow-range steam generator level transmitters to +5%. The original Lot 2 report noted an error of +7.3% early in the steam test transient. Additional tests were performed on the same unit using water as the process medium instead of nitrogen. This caused the temperature of the strain gage to track the temperature of the circuit board more closely during the first minute and limited the positive error to less than 44. In other words, the temperature difference between the strain gage and the circuit board has been reduced to a level compatible to McGuire functional requirements.
Note 6 b
d This equipment is located in Unit 2 which is scheduled for operation in Qualification information will be provided in a future revision 1983 to Eis submittal following review by Duke Power Company.
Note 7 Five minutes is adequate time to assure containment isolation and the required repositioning of other safety-related valves.
Note 8 During the 30 days following a postulated accident, the containment temperature and pressure will approach normal; therefore, additional service can reasonably be expected from this equipment. ,
Note 9 The Target Rock solenoid valves are used in the reactor head vent system to pravide a path for removal of non-condensable gases. Core events leading to the generation of significant amounts of non-condensable gases occur early in the postulated accident sequences and are of short duration; therefore, these valves are only required to operate within the first few days of the accident. The need for venting non-condensable gases is not anticipated beyond the 14 day qualification of the valves.
O EL40101T/38 - 4/13/82
Page 38 Revision 0 Note 10 Electric penetration types B, C, F, G, and K are the only penetrations required to function electrically in the containment accident environment. l All electric penetrations, however, are designed and qualified to maintain their mechanical integrity under normal and postulated accident environmental conditions. I Note 11 The McGuire electric penetrations are protected from direct spray impingement by galvanized steel boxes.
Note 12 The manufacturer's test report states that the detector assembly is constructed of metal and ceramic and is not affected by radiation.
Note 13 This equipment has been installed per NRC requirements stated in NUREG 0737. Overall system accuracy should be within a factor of 2 over the 2*. The calibrated' entire accuracy range assystem of the stated is in 20 Reg % of the system's range.ulatory Guide 1.97, rev.
Note 14 The cables for the containment radiation monitors (high range) which are located inside the containment are routed in conduit, and, therefore not exposed to chemical spray.
Note 15 Subsequent testing by the manufacturer showed a failure of a sample of cable at a higher temperature. Duke Power Company will replace the existing cable by June 1982 with a cable having a higher temperature qualification.
Note 16 This equipment has been installed per NRC requirements stated in NUREG0737. Qualification information will be provided in a future revision to this submittal following review by Duke Power Company.
O EL40101T/39 - 4/13/82
.> _^~
~
W & , W '
. .a -
u.
Attachment 2 Summary of Environmental Qualification of Class IE Equipment s ,
.N ' ~~
Located in the Annulus t
1..
I 6 A f*
s
~ ,
- l
. . , l
e u... __aa_,
_ , - - - - . 2 --- - - - - -aa e 4 n ~- a-- ---a- - 4 - - ~ - - - -- . - --
e' f
l ATTACHMENT 2 l SU MARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED IN THE ANNULUS M Rev. Page a Rev. M Rev.
1 0 2 0
! 3 0 '
- i. 4 0 L_ 5 0 6 0 $.
i 7 0 8 0 9 0
, \ ~ 10 0- i w -
-11 Os 4N '
12 0 -
13 . 0
! 7' L.,c 14 0 15 ~0 16 0 '
17 0 a ~ '
18 -
19 T
.' ' s 20 ~ .
21 o .
l' 22 ' 0' w- 23 \ 0 s- s i ,;.x--
\As s, 1
N- , ; ' ,
\
r
\ 9 g
s,
1, I -V.{ .
~ , _
\ "
r , t
\
T 'N '- k .
i." .
%. s.
t '4+ ,
. s i 'i t
- s. '
ss
- s ~y i
,,'T.-
J
. *s \s x-c \ 3
, s
!, EL40101T/40 - 4/13/82 i -
i I 's. -
g n
-t - - - . -. -
O O O- y v
s \ < <
i McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 1 SIM4ARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O. j LOCATED IN THE AlyNULUS ,
~ ..
MANUFACTURER: Barton .MODEL #: 386A':j [ l; [' s' EQUIPMENT ID: Transmitter-Containmert Sump - ' t Level
. o y,
OPERABILITY OPERABILITY:. ACCURACY ' ACCURACY ACCIDENT ' ENVIRONMENT DEMONSTRATED REQUIRED DEMONSTRATED 3,,
ENVIRONiiENT TO.WHICH REQi! IRED IN (1) - QUALIFIED ACCIDENT (2) (% OF SPAN) (% OF SPAN) 'rl !
FNVIRONMENT
>i .i' I\
Temp: 160*F 4 months 1 year i 25% -22%
Temp: 142"F '
RH: 100% RH: 100% post DBE ' post DBE .
Rad: 4.5X10?R Rad: 2X108R t ,
4 QUALIFICATION REPORT: Wyle Test Report 43904-1, Rev. C METHOD: Test <
EL40101T/41 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 2
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED IN THE ANNULUS EQUIPMENT ID: Transmitter-RCS Pressure (WR) MANUFACTURER: Posemount MODEL #: 1153GA9 ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICid REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED ACCIDENT (2) (% OF SPAN) (% OF SPAN)
ENVIRONMENT Temp: 142 F Temp: 350*F 2 weeks 1 year i 10% i 8%
RH: 100% RH: 100% post DBE post DBE Upper Range Rad: 1.2X10 7R Rad: 4X107R QUALIFICATION REPORT: Test Report RMT Report #3788, Rev. A METHOD: Similarity & Type Test EL40101T/42 - 4/13/82
O O O 1
i McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 3 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT , Rev. O LOCATED IN THE ANNULUS EQUIPMENT ID: Transmitter-RCS Pressure (WR) PANUFACTURER: Barton MODEL #: 763 (lot 2) ,
(Unit 1)
ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED ACCICENT (2) (% OF SPAN) (% OF SPAN)
ENVIRONMENT Temp: 142 F Temo: 380*F 2 weeks 1 year i 10% i 7.7%
- RH
- 100% RH: 100% post DBE post DBE Rad: 1.2X107R Rad: 5X107R QUALIFICATION REPORT: WCAP 9885 METHOD: Test EL40101T/43 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 4 SU M ARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED IN THE ANNULUS i
EQUIPMENT ID: Transmitter - RCS Pressure (WR) MANUFACTURER: Barton MODEL #: 763 (lot 5)
(Unit 2)
ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED ACCIDENT (2) (% OF SPAN) (% OF SPAN)
ENVIRONMENT Teg: 142 F (Note 4) 2 weeks (Note 4) 10% (Note 4)
Ris: 100% post DBE Rad: 1.2X10 lR QUALIFICATION REPDRT: (Note 4)
METHOD: (Note 4)
EL40101T/44 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 5 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED IN THE ANNULUS EQUlfMENT ID: Valve Solenoid Operators MANUFACTURER: Valcor MODEL #: V70900-21-3 ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMGNSTRATED (1) QUALIFIED ACCIDENT (2) (% OF SPAN) (% OF SPAN)
ENVIRONMENT l
Temp: 142 F Temp: 346"F 5 minutes 1 year N/A N/A Ril: 100% RH: 100% post DBE post DBE Rad: 1X104R Rad: 2X108R (Note 3) l QUALIFICATION REPORT: Test Reports QR-52600-515-Rev. B; QR-70900-?l-1-Rev. A; MR7095-21-3-1 l
t METil00: Test / Analysis I
i i
l EL4010lT/45 - 4/13/82 i
O O O McGUIRE NUCLEAR STATION - UNITS 1 Ed 2 Page 6 SU M ARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED IN THE ANNULUS EQUIPMENT ID: Valve Solenoid Operators MANUFACTURER: ASCO MODEL #: NP8316E34E ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED ACCIDENT (2) (% OF SPAN) (% OF SPAN)
ENVIRONMENT Temp: 142 F Temp: 346*F 5 minutes 1 year N/A N/A RH: 100% Ril: 100% post DBE post OBE Rad: 1X10iR Rad: 2X108R (Note 3)
~
QUALIFICATION REPORT: Test Report AQS21676/TR METHOD: Test EL40101T/46 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 7 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED IN THE ANNULUS EQUIPMENT ID: Valve Motor Operators MANUFACTURER: Rotork MODEL #: NA-1 ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED ACCIDENT (2) (% OF SPAN) (% OF SPAN)
ENVIRONMENT lemp: 142 F Temp: 340*F 5 minutes 1 year N/A N/A RH: 100% RH: 100% post DBE post DBE Rad: 1X104R Rad: 2X108R (Note 3)
QUALIFICATION REPORT: Test Reports N 11/4 dated 12/70; TR-116 dated 10/73; TR-222 dated 6/75 METHOD: Test EL40101T/47 - 4/13/82
McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 8 l SUiNARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED IN THE ANNULUS EQUIPMENT ID: Valve Motor Operators MANUFACTURER: Rotork MODEL #: NA-2 OPERABILITY OPERABILITY ACCURACY ACCURACY ACCIDENT ENVIRONMENT TO WHICH DEMONSTRATED REQUIRED DEMONSTRATED ENVIRONMENT REQUIRED IN ACCIDENT (2) (% OF SPAN) (% OF SPAN)
(1) QUALIFIED ENVIRONMENT Temp: 163 F 5 minutes 1 year N/A N/A Temp: 142 F RH: 100% RH: 100% post DBE post DBE l
Rad: 1X104R Rad: 3X10 7R (Note 3) l l
QUALIFICATION REPORT: Test Reports H11/4 dated 12/70, TR-116 dated 10/73, TR-222 dated 6/75, TR-3025 dated 4/80 METHOD: Test EL40101T/48 - 4/13/82
n O O O I
McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 9 SutttARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED IN THE ANNULUS EQUIPNENT ID: Stem-Mounted Limit Switches MANUFACTURER: NANCO MODEL #: EA-180 1
ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED ACCIDENT (2) (% OF SPAN) (% OF SPAN)
ENVIRONMENT Temp: 142 F Temp: 340'F 5 minutes 1 year N/A N/A RH: 100% RH: 100% post DBE post DBE Rad: 1X104R Rad: 2X108R QUALIFICATION REPORT: NAMC0 Test Report for EA-180, dated 9/5/78 METHOD: Test EL40101T/49 - 4/13/82
O O O l
McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 10
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED IN THE ANNULUS Limit Switch MANUFACTURER: Microswitch MODEL #: LSM4N EQUIPMENT ID:
ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY TO MlICH DEMONSTRATED REQUIRED DEMONSTRATED ENVIRONMENT REQUIRED IN (1) QUALIFIED ACCIDENT (2) (% OF SPAN) (% OF SPAN)
ENVIRONMENT Teap: 142 F Temp: 199 F 30 days 1 year N/A N/A RH: 100% RH: 100% post DBE post DBE Rad: 4.8X108R Rad: 1X107R QUALIFICATION REPORT: Report LTR-24407 METHOD: Analysis f
EL40101T/50 - 4/13/82
- - _ _ . . _ _ _ _ _ - _ _ _ _ _ _ _ . _ _ .~
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 11 SUM ARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED IN THE ANNULUS EQ'lIPMENT ID: Cable - Instrumentation MANUFACTURER: Boston Insulated MODEL #: XLPE ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED ACCIDENT (2) (% OF SPAN) (% OF SPAN)
ENVIRONMENT Temp: 142 F Temp: 194 F 4 months 1 year N/A N/A RH: 100% RH: 100% .
post DBE post DBE Rad: 3X107R Rad: 2X108R (Note 5)
QUALIFICATION REPORT: B.I.W. Test B912 METHOD: Test EL40101T/51 - 4/13/82
(
l O O O l
l McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 12 i
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED IN THE ANNULUS 1
EQUIPMENT ID: Cable - Instrumentation MANUFACTURER: Brand Rex MODEL #: XLPE ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACC' n tre ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQU; RED DEMONSTRATED (1) QUALIFIED ACCIDENT (2) (% OF SPAN) (% OF SPAN)
ENVIRONMENT Temp: 142*F Temp: 194*F 4 months 1 year N/A N/A RH: 100% RH: 100% post DBE post DBE
! Rad: 3X107R Rad: 2X10sR (Note 5) 1 QUALIFICATION REPORT: Brand Rex Test FC4113 METHOD: Test EL40101T/52 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 13 SU MARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED IN THE ANNULUS EQUIPMENT ID: Cable - Instrumentation MANUFACTURER: Samuel Moore MODEL #: EP/HYP ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED ACCIDENT (2) (% OF SPAN) (% OF SPAN)
. ENVIRONMENT Temp: 142 F Temp: 194 F 4 months 1 year N/A N/A RH: 100% RH: 100% post DBE post DBE Rad: 3X107R Rad: 2X108R (Note 5)
QUALIFICATION REPORT: Samuel Moore Test FC3683 MElH00: Test EL40101T/53 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 14 50M ARY OF ENVIRONMENTAL QUALIFICATION OF CLASS lE EQUIPMENT Rev. O LOCATED IN THE ANNULUS MANUFACTURER: Samuel Moore MODEL #: PVC EQUIPMENT ID: Cable - Instrumentation ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY TO MlICH DEMONSTRATED REQUIRED DEMONSTRATED ENVIRONMENT REQUIRED IN (1) QUALIFIED ACCIDENT (2) (% OF SPAN) (% OF SPAN)
ENVIRONMENT Temp: 142*F Temp: 194*F 4 months 1 year N/A N/A RH: 100% RH: 100% post DBE post DBE Rad: 3X107R Rad: SX107R (Note 5)
QUALIFICATION REPORT: Duke Test TR017 METil00: Test EL4010lT/54 - 4/13/82
i O O O i
McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 15 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED IN THE ANNULUS EQUIPMENT ID: Cable - Instrumentation MANUFACTURER: Brand Rex MODEL #: PVC l
ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED ACCIDENT (2) (% OF SPAN) (% OF SPAN)
ENVIRONMENT i
l Temp: 142*F Temp: 194"F 4 months 1 year N/A N/A RH: 100% RH: 100% post DBE post DBE Rad: 3X107R Rad: SX107R (Note 5)
QUALIFICATION REPORT: Duke Test TR017 METHOD: Test EL40101T/55 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 16 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. 0 LOCATED IN THE ANNULUS EQUIPMENT ID: Cable - Instrumentation MANUFACTURER: Okonite MODEL #: Hypalon i
ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED ACCIDENT (2) (% OF SPAN) (% OF SPAN)
ENVIRONMENT l
Temp: 142 F Temp: 194"F 4 months 1 year N/A N/A RH: 100% RH: 100% post DBE post DBE Rad: 3X107R Rad: 3.5X107R (Note 5)
QUALIFICATION REPORT: ER 110E METHOD: Test EL40101T/56 - 4/13/82 9-- ,--.n w v. v ,- ,w-- +1-. -..-- r w.- +-- . y ,,3------ ,v.-- - - - -,. --v- -
- ,- -e-.,,w - -
, ,. r- < w ---r . - - - - - - - - - -c - ----- - --
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 17 SUP9tARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED IN THE ANNULUS
, EQUIPMENT ID: Cable - Instrumentation MANUFACTURER: Okonite MODEL #: EP ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED ACCIDENT (2) (% OF SPAN) (% OF SPAN)
ENVIRONMENT Temp: 142*F Temp: 194 F 4 months . 1 year N/A N/A RH: 100% RH: 100% post DBE post DBE Rad: 3X107R Rad: 2X108R (Note 5)
QUALIFICATION REPORT: Okonite Test Reports N1, FN1 & G3 METHOD: Test EL40101T/57 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 18 i SUW ARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED IN THE ANNULUS EQUIPMENT ID: Cable - Control MANUFACTURER: Okonite MODEL #: EP/HYP
? ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY
! ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED i
(1) QUALIFIED ACCIDENT (2) (% OF SPAN) (% OF SPAN)
. ENVIRONMENT i
Temp: 142 F Temp: 194"F 4 months 1 year N/A N/A
! Rad: 3X107R Rad: 2X108R (Note 5)
QUALIFICATION REPORT: Okonite Test Reports N1, FN1 & G3 i
HETH00: Test EL40101T/58 - 4/13/82 wa"" -h
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 19 SUP#tARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED IN THE ANNULUS EQUIPMENT ID: Cable - Control MANUFACTURER: Samuel Moore MODEL #: EP/HYP ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH RE0llIRO U; DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED ACCIDENT (2) (% OF SPAN) (% OF SPAN)
ENVIRONNENT Temp: 142 F Temp: 194*F 4 months 1 year N/A N/A Ril: 100% RH: 100% post DBE post DBE Rad: 3X107R Rad: 2X108R (Note 5)
QUALIFICATION REPORT: Samuel Moore Test FC3683 ME1H00: Test EL40101T/59 - 4/13/82
O O O McGUIRE NUCLEAR STATION UNITS 1 AND 2 Page 20 SUMARY OF ENVIRONMENTAL QUALIFICATI0h' 0F CLASS 1E EQUIPMENT Rev. O LOCATED IN THE ANNULUS EQUIPMENT ID: Cable - Control MANUFACTURER; Anaconda MODEL #: EP/HYP ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED ACCIDENT (2) (% OF SPAN) (% OF SPAN)
ENVIRONMENT Temp: 142 F Temp: 194*F 4 months 1 year N/A N/A RH: 100% RH: 100% post DBE post DBE Rad: 3X107R Rad: 2X108R (Note 5)
QUALIFICATION REPORT: Anaconda Test FC4350-2, FC4350-3 and Supplements METHOD: Test EL40101T/60 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 21 Su m ARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED IN THE ANNULUS EQUIPMENT ID: Cable - Power MANUFACTURER: Anaconda MODEL #: EP/HYP i
! ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO MIICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED ACCIDENT (2) (% OF SPAN) (% OF SPAN)
ENVIRONMENT l et."p: 142 F Temp: 194"F 4 months 1 year N/A N/A RH: 100% RH: 100% post DBE post DBE Rad: 3X107R Rad: 2X10 8R (Note 5)
QUALIFICATION REPORT: Anaconda Test FC4350-2, FC4350-3 and Supplements HETil00: Test EL40101T/61 - 4/13/82
O -
O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 22 SUMARY OF ENVIRONMENTAL QUALIFICATION GF CLASS 1E EQUIPMENT Rev. O LOCATED IN THE ANNULUS EQUIPMENT ID: Cable - Power MANUFACTURER: Okonite MODEL #: EP/HYP j
ACCIDENT ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED ACCIDENT (2) (% OF SPAN) (% OF SPAN)
ENVIRONMENT lemp: 142*F Temp: 194*F 4 months 1 year N/A N/A RH: 100% RH: 100% post DBE post DBE Rad: 3X107R Rad: 2X108R (Note 5)
QUALIFICATION REPORT: Okonite Test Reports N1, FN1 & G3 i
HETHOD: Test EL40101T/62 - 4/13/82
r Page 23 Revision 0 MCGUIRE NUCLEAR STATION - UNITS 1 AND 2 ENVIRONMENTAL QUALFICATION OF CLASS 1E EQUIPMENT LOCATED IN THE ANNULUS Note 1 The parameters that compose the overall worst-case annulus accident environment are as follows:
Temperature: 142*F peak; Annulus temperature excursion due to a main steam line break inside containment as shown in calculation MCC-1223.14-00-0016.
Relative Humidity: 100%
Radiation: Total integrated radiation dose for the equipment location includes 40 years normal operating dose plus the appropriate accident dose.
The accident dose is a function of the operability time required in the accident environment.
Note 2 The operability time demonstrated is the period required for the equipment to rea::h its qualified radiation dose in the accident environment.
Temperature transients in the annulus, due to a MSLB (142 F) or LOCA l (122 F) inside containment, are minimal and well within the design capabilities of the equipment. Therefore, temperature is not a fartor in s operability time.
Note 3 Five minutes is adequate time to assure containment isolation and the required repositioning of other safety-related valves.
Note 4 l
This transmitter is located in Unit 2 which is scheduled for operation in 1983. Qualification information will be provided in a future revision to this submittal following review by Duke Power Company.
Note 5 The qualified temperature is based on the insulation rating of the cable.
The temperature of the insulation is a function of the cable conductor temperature and the ambient temperature.
O V
EL40101T/63 - 4/13/82
O Attachment 3 Summary of Environmental Qualification of Class IE Equipment Located Outside Containment and Exposed to HEL8 Environment 0
0
l ATTACHMENT 3 SUMRY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT
, LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT M Rev. & Rev. M Rev.
1 0 35 0 l 2 0 36 0 l 3 0 37 0 4 0 38 0 5 0 39 0 6 0 40 0 7 0 41 0 8 0 42 0 9 0 43 0 10 0 44 0
! 11 0 45 0 12 0 46 0 13 0 47 0 14 0 48 0 15 0 49 0 16 0 50 0 17 0 51 0 18 0 52 0 19 0 53 0 20 0 54 0 21 0 55 0 22 0 56 0 i
0 23 24 25 0
0 0
57 58 59 0
0 0 .
26 0 60 0 27 0 61 0 28 0 62 0 29 0 63 0 30 0 64 0 31 0 65 0 32 0 66 0 33 0 34 0 i
O EL40101T/64 - 4/13/82
- O O O l
l l
McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 1 l SU M ARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. 0
, LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT l
l EQUIPMENT ID: Containment Spray MANUFACTURER: Westinghouse, MODEL #: 73F56019-1573, Pump Motors Buffalo 73F56019-2S73, 73F56019-3S73, 73F56019-4573 HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ,
ENVIRONMENT TO milch REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED l (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
This equipment is not required to function for HELBs that affect its environment.
1 i
1 1
QUALIFICATION REPORT: Duke Report MDS/PDG-77-1, Calculation MCC-1206.47-00-0001
] l
]
METHOD: Analysis EL40101T/65 - 4/13/82
O O O I
McGUIRE NUCLEAR STATI0H - UNITS 1 AND 2 Page 2
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT MANUFACTURER: Westinghouse, MODEL #: 71F13454-1572, 71F13454-EQUIPMENT ID: Residual lleat Removal 2572, 71F13495-1572, Pump Motors Buffalo l 71F13495-2572 HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY TO WHICH DEMONSTRATED REQUIRED DEMONSTRATED ENVIRONMENT REQUIRED IN (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2) i This equipment is not required to function for HELBs that affect its environment.
l l
l QUALIFICATION REPORT: Duke Report M05/PDG-77-1, Calculation MCC-1206.47-00-0001 ,
?'
METHOD: Analysis ,
~
l, i /
5
( EL40101T/66 - 4/13/82 ,
V ,
3, McGUIRE NUCLEAR STATION - UNITS 1 AND 2 ,
.j Page 3 '
SUtttARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT - '
Pev. 0 ,j LOCATED OUTSIDE CONTAINMENT AND.EXf0sCD TO HELB ENVIR0fMENT. .
r- .; , /<
. >' _ . . - 3 EQUIPMENT ID: Safety Injection MANUtACTURER: Westinghouse, MODEL #: 73F69618-1575,f735656I6s
- Pump Motors Buffalo 2575,73F69613-3375, ', -
, 73F69618-4575 . ,,,.-
s .
, ,3 >
HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH DEMONSTRATED DEMONSTRATED '
REQUIRED IN REQUIRED (1) QUALIFIED , ilELB (% OF SPAN)
~
(% OF SPAN)'
ENVIRONMENT (2) . . . , .
Temp: 212 F Temp: 212*F Continuous Continuous N/A -' ' N/A
' ~ .
- v. _
l QUALIFICATION REPORT: WCAP 8754 and Duke analyses of Westinghouse testing: MCC 1381.05-bO-0101, MCC '1381.05-00-0102 METHOD: Test and Analysis EL401011/67 - 4/13/82
O O O 4
McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 4 SUPEARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAIMtENT AND EXPOSED TO HELB ENVIRONMENT l
EQUIPMENT ID: Centrifugal Charging MANUFACTURER: Westinghouse, MODEL #: 72F44587-1573, 72F44587-Pump Motors Buffalo 2573, 72F44587-3573 72F44587-4573 HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED l
(1) QUALIFIED HELB (% OF SPtN) (% OF SPAN)
ENVIRONMENT (2)
Temp: 212 F Temp: 212*F Continuous Continuous N/A li/A l
l QUALIFICATION REPORT: WCAP 8754 and Duke analyses of Westinghouse testing: MCC 1381.05-00-0101, MCC 1381.05-00-0102 l
l METHOD: Test and Analysis l
l l
EL40101T/68 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 5 StM4ARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Nuclear Service Water MANUFACTURER: Westinghouse, MODEL #: 72F36530-1575, 72F36531-Pump Motors Buffalo IS75, 72L10936-1575, 72L10937-1575 HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
Temp: 212 F Temp: 212*F Continuous Continuous N/A N/A QUALIFICATION REPORT: WCAP 8754, and Duke analyses of Westinghouse testing: MCC-1381.05-00-0101, MCC-1381.05-00-0102 METHOD: Test and Analysis EL40101T/69 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 6 SUMARY OF EilVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Ground Water Drain MANUFACTURER: Reliance MODEL #: 2Y-273734 t
Sump Pump Motors llELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
The change in ground water sump level is gradual enough to allow repair or replacement of the pump motor after the environment has returned to normal.
i I
- QUALIFICATION REPORT: Duke Report MDS/PDG-77-1, Calculation MCC-1206.47-00-0001 METil00: Analysis l
l
{
l l EL40101T/70 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 7 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Component Cooling MANUFACTURER: Westinghouse, MODEL #: 72F44689-1574, 72F44689-Pump Motors Buffalo 2574, 72F44689-3574, 72F44689-4574, 72F44690-IS74, 72F44690-2S74, 72F44690-3S74, 72F44690-4574 HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HEED (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
Temp: 212"F Temp: 212*F Continuous Continuous N/A N/A QUALIFICATION REPORT: WCAP 8754, and Duke analyses on Westinghouse testing: MCC-1381.05-00-0101, MCC-1381.05-00-0102 HETHOD: Test and Analysis EL40101T/71 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 8 StM1ARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Pev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Boric Acid" Transfer MANUFACTURER: Chempump/ MODEL #: Chempump Model Pump Motors Westinghouse GVH-10K-12H-1S HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HE',B (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
This equipment is not required to function for HELBs that affect its environment.
QUALIFICATION REPORT: Duke Report HDS/PDG-77-1, Calculation MCC-1206.47-00-0001 METHOD: Analysis EL40101T/72 - 4/13/82
O O O l McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 9 l SIMiARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O j LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Boron Injection Recirc MANUFACTURER: Chempump/ MODEL #: Chempump Model Pump Motors Westinghouse GVH-3K-751H-15 l
HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
This equipment is net required to function for HELBs that affect its environment.
QUALIFICATION REPORT: Duke Report MDS/PDG-77-1, Calculation MCC-1206.47-00-0001 METHOD: Analysis EL40101T/73 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 10 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Spent Fuel Cooling MANUFACTURER: Westinghouse, MODEL #: 72F44649-1574, 72F44649-Pump Motors Buffalo 2574, 72F44650-1576, 72F44650-2576 HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WilICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUAllFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
Temp: 132.4 F Temp: 145'F Continuous Continuous N/A N/A QUALIFICATION REPORT: WCAP 8154 and Duke analysis of Westinghouse testing: MCC 1381.05-00-0101 METHOD: Test and Analysis EL40101T/74 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 11 I'
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev.0 LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT MANUFACTURER: Reliance MODEL #: 2YF-882311, 1YF-882311 EQUIPMENT ID: Residual Heat Removal Air Handling Unit Motors and Spare llELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
This equipment is not required to function for HELBs that affect its environment.
QUALIFICATION REPORT: Duke Report MDS/PDG-77-1, Calculation MCC-1206.47-00-0001 METHOD: Analysis EL40101T/75 - 4/13/82
y, _ _ .
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 12 StettARY OF ENVIRONMENTAL QUALIFI MTION OF CLASS 1E EQUIPMENT Rev. O l.0CATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Containment Spray MANUFACTURER: Reliance MODEL #: 1YF-882311 Air Handling Unit Motors and Spare ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY HELB TO WHICH DEMONSTRATED REQUIRED DEMONSTRATED ENVIRONMENT REQUIRED IN HELB (% OF SPAN) (% OF SPAN)
(1) QUALIFIED ENVIRONMENT (2)
This equipment is not required to function for HELBs that affect its environment.
QUALIFICATION REPORT: Duke Report M3S/PDG-77-1, Calculation MCC-1206.47-00-0001 METHOD: Analysis EL40101T/76 - 4/13/82
1 l O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 13 SUM 4ARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. 0 l LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT l
l l
, EQUIPMENT ID: Fuel Pool Air Handling MANUFACTURER: Reliance MODEL #: 3YF-882311, 1YF-882311 i Unit Motors and Spare llELB ENVIRONMENT OPERABILIlY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
- Temp
- 132.4 F Temp: 150 F Continuous Continuous N/A N/A i
QUALIFICATION REPORT: M L Ward letter to file, MCM 1320.00 dated 7/17/80
} METHOD: Analysis l
} EL40101T/77 - 4/13/82
l O O O l
l l
McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 14 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT
- EQUIPMENT ID: Annulus Ventilation Filter MANUFACTURER: Farr MODEL #:
I Unit AVF-1A, 18, 2A, & 2B l
! HELB ENVIRONMENT OFERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED i (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
This equipment is not required to function for HELBs that affect its environment, i
l QUALIFICATION REPORT: Duke Report MDS/PDG-77-1, Calculation MCC-1206.47-00-0001 METHOD: Analysis EL40101T/78 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 15
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS IE EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Annulus Ventilation Damper MANUFACTURER: Rotork HODEL #: 7A/3MW Actuators I
HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY TO WHICH DEMONSTRATED REQUIRED DEMONSTRATED ENVIRONMENT REQUIRED IN (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
This equipment is not required to function for HELBs that affect its environment.
l QUALIFICATION REPORT: Duke Report MDS/PDG-77-1, Calculation MCC-1206.47-00-0001 METHOD: Analysis EL40101T/79 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 16 SUtNARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Annulus Ventilation Fan Motors MANUFACTURER: Joy / Reliance MODEL #: 2YF-273608 HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
This equipment is not required to function for HELBs that affect its environment.
QUALIFICATION REPORT: Duke Report MOS/PDG-77-1, Calculation MCC-1206.47-00-0001 METHOD: Analysis EL40101T/80 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 17 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. 0 LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT l
l EQUIPMENT ID: Aux. Bldg. Filtered Exhaust Fan MANUFACTURER: Powers MODEL #:
Control Panel ABFXF-CP-1A, 1B, 2A,
& 2B HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY TO WHICH DEMONSTRATED REQUIRED DEMON 3TRATED ENVIRONMENT REQUIRED IN (1) QUALIFIED HELB (% OF SPAN) (% Or SPAN)
ENVIRONMENT (2)
This equipment is not required to function for HELBs that affect its environment.
QUALIFICATION REPORT: Duke Report MOS/PDG-77-1, Calculation MCC-1206.47-00-0001 METHOD: Analysis l
EL40101T/81 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 18
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINHENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Firestat (temperature switch) MANUFACTURER: United Electric MODEL #: 8006-6CS HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
This equipment is not required to function for HELBs that affect its environment.
QUALIFICATION REPORT: Duke Report HDS/PDG-77-1, Calculation MCC-1206.47-00-0001 METHOD: Analysis EL40101T/82 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 19 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Aux. Bldg. Filtered Exhaust Fan MANUFACTURER: Reliance MODEL #: 1YF-882811, 1YF-882812 Motors and Spares 1YF-882900, 1YF-882931 HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
This equipment is not required to function for HELBs that affect its environment.
QUALIFICATION REPORT: Duke Report H05/PDG-77-1, Calculation MCC-1206.47-00-0001 METHOD: Analysis EL4010lT/83 - 4/13/82 1
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 20 StWARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: AHU Differential Pressure MANUFACTURER: Solon Mfg. Co. MODEL #: 7PSIDW Switches
! HELB ENVIRONMENT OPERABILITY OPERAPILITY ACCURACY ACCURACY
! ENVIROINENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
This equipment is not required to function for HELBs that affect its environment.
QUALIFICATION REPORT: Duke Report MDS/PDG-77-1, Calculation MCC-1206.47-00-0001 4
METHOD: Analysis EL40101T/84 - 4/13/82
O O O I
McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 21 SUMARY OF EhVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. 0 LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT 1
- EQUIPMENT ID: Valve Motor Operatore MANUFACTURER: Limtorque MODEL #: SMB Order Numbers:
, 375826-A, 375834-A, 375829-A, 375835-A
, 375831-A, 379664-B 375832-A, 379857-A 375833-A i HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2) 1 Temp: 212 F Temp: 250 F Continuous Continuous N/A N/A QUALIFICATION REPORT: Limitorque Test Report: B0058,1/11/80 METHOD: Test EL40101T/85 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 22
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Valve Motor Operators MANUFACTURER: Limotorque MODEL #: SMB Order Numbers:
383584-A & 391179-A llELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WillCil REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
Temp: 212 F Temp: 340*F Continuous Continuous N/A N/A QUALIFICATION REPORT: Limitorque Test Report: B0058,1/11/80 METHOD: Test EL40101T/86 - 4/13/82
O O O t
McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 23
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Valve Motor Operators MANUFACTURER: Rotork HODEL #: 7NA2 11NA2, 14NA2, 16NA2 30NA2, 40NA2, 70NA2, 90NA2, 93NA2 i
HELS ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY
! ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
Temp: '212 F Temp: 163'F Continuous Continuous N/A N/A (Note 3)
QUALIFICATION REPORT: Rotork Test Reports N11/4, December 1970; TR116, October 1973; TR222, June 1975; TR3025, April 1980 METHOD: Test EL40101T/87 - 4/13/82
O O O McGUIRE NilCLEAR STATION - UNITS 1 AND 2 Page 24 SU M ARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. 0 l LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Valve Motor Operators MANUFACTURER: Rotork MODEL #: 7NA1, 11NA1, 14NA1, 16NA1, 30NA1 HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
Te:p: 212 F Temp: 340*F Continuous Continuous N/A N/A i
QUALIFICATION REPORT: Rotork Test Reports N11/4, December 1970; TR116, October 1973; TR222, June 1975 METHOD: Test EL40101T/88 - 4/13/82
- O O O l
t McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 25 StilEARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Valve Solenoid Operators MANUFACTURER: Valcor MODEL #: V70900-21-3, V70900-21-1 IIELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WilICll REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (%OFSPAN) (% OF SPAN)
ENVIRONMENT (2)
Temp: 330 F Temp: 346 F Continuous Continuous N/A N/A QUALIFICATION REPORT: Test Reports QR70900-21-1 Rev. A; QR52600-515 Rev. B; MR70905-21-3-1
~
METHOD: Test & Similarity EL40101T/89 - 4/13/82
l '
1 O O O l
l McGUIRE NUCLEAR STAlI0N - UNITS 1 AND 2 Page 26 SUPNARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Valve Solenoid Operators MANUFACTURER: ASCO MODEL #: NP 8316E34E, NP 8316E36E HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2) l Temp: 330 F Tem,: 346 F Continuous Continuous N/A N/A 1
l QUALIFICATION REPORT: Test Report: AQS21678/TR METHOD: Test EL40101T/90 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 27 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPNENT ID: Valve Operator - MSIV MANUFACTURER: Atwood & Morrill MODEL #: 34" MSIV w/ Chicago Fluid Pwr. actuator HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY
, ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
Temp: 330 F Temp: 340*F Continuous Continuous N/A N/A
- QUALIFICATION REPORT: Test Report Procedure No. 20139500 dated 5/1/79 -
1 METHOD: Test EL40101T/91 - 4/13/82
i i
i McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 28 StM4ARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Valve Solenoid Operators MANUFACTURER: Valcor MODEL #: V526 HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
Temp: 212 F Temp: 346'F Continuous Continuous N/A N/A i
QUALIFICATION REPORT: Test Report QR56200-515, dated 10/31/77 METHOD: Test EL40101T/92 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 29 StMtARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. 0 LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT 10 Valve Operator FWIV MANUFACTURER: Borg Warner MODEL #: 12" Gate w/ Elect Hyd.
Oper.
HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTF.ATED REQUIRED DEMONSTRA1ED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
Temp: 330 F Temp: 330 F Continuous Continuous N/A N/A ,
(Note 4) i QUALIFICATION REPORT: Test Report Nos. 1785 & 1779, dated 11/12/79 METHOD: Test EL40101T/93 - 4/13/82
O O O l
McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 30 SU M ARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Level Switch MANUFACTURER: Robertshaw MODEL #: SL-40?-B4-3 i
l HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSIRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
. Temp: 240"F (Note 5) Continuous (Note 5) N/A N/A
- QUALIFICATION REPORT
- (Note 5)
! HETH00: (Note 5)
EL40101T/94 - 4/13/82 4
O O O
'l McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 31 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS lE EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Limit Switch MANUFACTURER: NAMCO MODEL #: EA180, EA740 l
! HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH
- REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
Temp: 212*F Temp: 340*F Continuous Continuous N/A N/A 1
i QUALIFICATION REPORT: NAMC0 Test Reports dated 9/5/78 & 2/22/79 i
! METHOD: Test EL40101T/95 - 4/13/82 i
O O O l
McGUIRE NUCLEAR STATI6d - UNITS 1 AND 2 Page 32 SU M ARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT l EQUIPMENT ID: Stem Mounted Limit Switches MANUFACTURER: NAMCO MODEL #: EA-170-302 L HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
Temp: 212*F Temp: 248*F Continuous Continuous N/A N/A QUALIFICATION REPORT: NAMCO Test Report QTR-107 dated 3/11/81 METHOD: Test EL40101T/96 - 4/13/82
! O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 33 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Cable - Control MANUFACTURER: Brand Rex MODEL #: XLPE Insulation HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY
! ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED 1 (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
Temp: 330*F Temp: 346*F Continuous Continuouc N/A N/A (Note 6) 1 QUALIFICATION REPORT: Test Reports FC5120-1 and FC5120-3 METHOD: Test i
EL40101T/97 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 34 SUtttARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Cable - Instrumentation MANUFACTURER: Samuel Moore MODEL #: EP/Hypalon Insulation HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2) femp: 330*F Temp: 340*F Continuous Continuous N/A N/A (Note 6)
QUALIFICATION REPORT: Test Report F-C3683 METHOD: Test EL40101T/98 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 35 SuffiARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Cable - Control, Instrumentation, MANUFACTURER: Okonite MODEL #: EP Insulation and 2KV power HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
Temp: 330 F Temp: 345"F Continuous Continuous N/A N/A (Note 6) i l
l l
l QUALIFICATION REPORT: Test Reports FN-1, N-1, G-3, 110E and 141 METIIOD: Test EL40101T/99 - 4/13/82
i O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 36
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Cable - Instrumentation MANdFACTURER: Okonite MODEL #: Tefzel 280 Insulation
! HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
Temp: 330 F Temp: 341'F Continuous Continuous N/A N/A (Note 6)
QUALIFICATION REPORT: Test Report K-0-1 (September 1979)
METHOD: Test EL40101T/100 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 37 SUtEARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Cable - Control and 2KV MANUFACTURER: Anaconda MODEL #: EP Insulation and Power EP/Hypalon Insulation HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2) 2 Temp: 330 F Temp: 346*F Continuous Continuous N/A N/A (Note 6)
QUALIFICATION REPORT: Test Reports F-C4350-2 and F-C4350-3, and Supplement METHOD: Test EL40101T/101 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 38
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Remote Starter 1NIA & INIB MANUFACTURER: Westinghouse MODEL #: A201 J3CA HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED i
(1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
This equipment is not required to function for HELBs that affect its environment.
QUALIFICATION REPORT: Duke Report MDS/PDG-77-1, Calculation MCC-1206.47-00-0001 METHOD: Analysis EL40101T/102 - 4/13/82
i O O O i
McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 39 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Contactor 1FW27A MANUFACTURER: Westinghouse MODEL #: A201 J3CA liELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY i
ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
- ENVIRONMENT (2)
- This equipment is not required to function for HELBs that affect its environment.
i i
i QUALIFICATION REPORT: Duke Report MDS/PDG-77-1, Calculation MCC-1206.47-00-0001 i
METHOD: Analysis l EL40101T/103 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 40 Sut94ARY OF ENVIRONMENTAL QUALIFICATION OF CLASS IE EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINHENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Current / Voltage Alarm MANUFACTURER: RIS MODEL #: ET1215 (Note 7)
HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED
- (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2) i Temp: 132.4*F Temp: 140*F Continuous Continuous i 2.5% i 0.5%
! (worst case) 1 QUALIFICATION REPORT: RIS specification, ESSEM V-A-4
! METHOD: Analysis l
EL40101T/104 - 4/13/82 i
,~ -
1 O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 41 SUN 4ARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Fuse MANUFACTURER: Bussmann MODEL #: FNA (Note 7) j HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY
- ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
Temp: 212*F 212*F Continuous Continuous N/A N/A (worst case) (Note 8) i i
I QUALIFICATION REPORT: Bussmann derating curve, ESSEM III-A-4 METHOD: Analysis EL40101T/105 - 4/13/82 m-,, , - . - - . , - - - . - - , - - _ w, y -- g ,y -7 y - y-w- ,m
I 1
i McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 42
! SU M ARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. 0 LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT
- EQUIPMENT ID: Fuse MANUFACTURER: Bussmann MODEL #: KTK 1 (Note 7)
HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
Temp: 212 F 212*F Continuous Continuous N/A N/A (worst case) (Note 8) i I,
QUALIFICATION REPORT: Derate per manufacturer's curve, ESSEM III-A-4 METHOD: Analysis i
I EL40101T/106 - 4/13/82
l O O O J
McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 43 SUP9tARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONIAI.'iMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Fuse block MANUFACTURER: Bussmann MODEL #: 3792 (Note 7)
HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
Temp: 212 F Temp: 250 F Continuous Continuous N/A N/A (worst case) j QUALIFICATION REPORT: Bussmann Manufacturing report dated 3/13/79 METHOD: Analysis EL40101T/107 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 44 SumARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Fuse block MANUFACTURER: Bussmann MODEL #: 3839 (Note 7)
HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY r ENVIRONMENT TO milch REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
Temp: 212 F Temp: 250 F Continuous Continuous N/A N/A (worst case)
QUALIFICATION REPORT: Bussmann Manufacturing report dated 3/13/79 METHOD: Analysis EL40101T/108 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 45 SUPNARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. 0
- LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Fuse block MANUFACTURER: Bussmann MODEL #: 4439 (Note 7)
HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO MlICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED i (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2) i I
Temp: 212"F Temp: 250*F Continuous Continuous N/A N/A (worst case) 1 l
l QUALIFICATION REPORT: Bussmann Manufacturing report dated 3/13/79 METHOD: Analysis EL40101T/109 - 4/13/82
O O O i
McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 46 SUPMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Indicating Light MANUFACTURER: Cutler-Hammer MODEL #: E29 (Note 7)
! HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WlICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
Temp: 240 F Temp: 255"F Continuous Continuous N/A N/A (worst case)
I i
QUALIFICATION REPORT: QTF Report TR-010 METHOD: Test EL40101T/110 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 47 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT l EQUIPMENT ID: Optical Isolator MANUFACTURER: E-Max MODEL #: 1750127
- (Note 7)
! HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY i ENVIRONMENT TO WHICH DEMONSTRATED DEMONSTRATED REQUIRED IN REQUIRED i (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
} Temp: 132.4 F Temp: 140*F Continuous Continuous N/A N/A (worst case) (Note 9) (Note 9)
- QUALIFICATION REPORT
- E-Max Specification, CNM-1338.00-002 l
METHOD: Analysis
) EL40101T/111 - 4/13/82 1
l
O O O I
McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 48 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. 0 '
LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Fuse block MANUFACTURER: Bussmann MODEL #: 2807 and 2808 (Note 7) i HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY j
ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED 3 (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
- ENVIRONMENT (2)
Temp: 212 F Temp: 250*F Continuous Continuous N/A N/A (worst case)
I i
QUALIFICATION REPORT: Bussmann Manufacturing report dated 3/13/79 i
HETH00: Analysis i
l i
l EL40101T/112 - 4/13/82 l
l o o o l
l McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 49 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. 0 LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Fuse block MANUFACTURER: Bussmann MODEL #: 4575 (Note 7)
HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO milch REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIROMENT(2)
Temp: 212*F Temp: 250*F Continuous Continuous N/A N/A (worst case)
QUALIFICATION REPORT: Bussmann Manufacturing report dated 7/24/80 METHOD: Analysis EL40101T/113 - 4/13/82
l i
O O O l
i McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 50
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. 0 1
LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT i
EQUIPMENT ID: Power Supply MANUFACTURER: Lambda MODEL #: LCS (Note 7)
HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY I ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED j (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN) 1 ENVIRONMENT (2) l f
i Temp: 132.4*F Temp: 160*F Continuous Continuous 110% regulation i 1% regulation (worst case) of output voltage of output voltage l
QUALIFICATION REPORT: Lambda specification data, ESSEM VIII-G-1 METHOD: Analysis EL40101T/114 - 4/13/82
O O O i
McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 51
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O
- LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID
- Relay MANUFACTURER: Cutler-Ilammer MODEL #: D23 (Note 7)
HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMF.NT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2) i Temp: 240 F Temp: 255"F Continuous Continuous N/A N/A (worst case) .
i QUALIFICATION REPORT: QTF Report TR-010 METHOD: Test EL40101T/115 - 4/13/82
O O O l
McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 52 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. 0 LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT 10: Relay MANUFACTURER: Cutler-Ilammer MODEL #: D26 (Note 7)
L IIELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2) 1 Temp: 240 F Temp: 255 F Continuous Continuous N/A N/A (worst case)
QUALIFICATION REPORT: QTF Report TR-010 METHOD: Test EL40101T/116 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 53 SUP91ARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT 1
EQUIPMENT ID: Relay MANUFACTURER: Struthers-Dunn MODEL #: 219 (Note 7)
IIELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO MlICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
Temp: 212 F Temp: 222*F Continuous Continuous N/A N/A (worst case)
QUALIFICATION REPORT: McGuire Nuclear Station Pipe Rupture Temperature Component Test; File: GS-640.00 l
l METHOD: Test / Analysis EL40101T/117 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 54 SU M ARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Relay MANUFACTURER: Agastat MODEL #: 7000 Series (Note 7) liELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WilICil REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
Temp: 130 F Temp: 165 F Continuous Continuous N/A N/A (worstcase)
QUALIFICATION REPORT: Agastat Specification data, ESSEM VII-C-5 l METil00: Analysis EL40101T/118 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 55 SUNiARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Resistor MANUFACTURER: Ohmite MODEL #: Brown Devil (Note 7)
I HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
Temp: 208 F 208*F Continuous Continuous 13% of resistor 11% of resistor (worst case) (Note 8) value value (Note 10) l QUALIFICATION REPORT: Ohmite derating curve, ESSEM IX-B-2 METHOD: Analysis EL40101T/119 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 56 SUM 1ARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Surge Suppressor MANUFACTURER: General Semiconductor MODEL #: Tranzorb (Note 7)
! HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY
- ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
Temp: 212*F Temp: 302'F Continuous Continuous N/A N/A i
(worst case)
I QUALIFICATION REPORT: General Semiconductor Specification, ESSEM III-C-1 l
METHOD: Analysis l
l EL4010lT/120 - 4/13/82 i
O O O 1
l l McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 57 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT
] '
EQUIPMENT ID: Resistor MANUFACTURER: Ohmite MODEL #: Dividohm (Note 7)
I
, HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED 1:ELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
Temp: 130 F 130*F Continuous Continuous N/A N/A l i
(worst case) (Note 8) l 4
l QUALIFICATION REPORT: Ohmite derating curve, ESSEM IX-B-3 METHOD: Analysis i
1 l
EL40101T/121 - 4/13/82 l
l
O O O McGUIRE tidCLEAR STATION - UNITS 1 AND 2 Page 58
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONI A;i3'ENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Switch and Indicating light MANUFACTURER: Cutler-Hammer MODEL #: E30 (Note 7)
HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO MlICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB -
(% OF SPAN) (% OF SPAN)
ENVIRONMENT (2) l Te:p: 212 F Temp: 255 F Continuous Continuous N/A N/A (worst case)
/
QUALIFICATION REPORT: QTF Report TR-010 METHOD: Test 1
EL40101T/122 - 4/13/82
l McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 59 SUttlARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O
! LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT l
1 EQUIPMENT ID: Switch MANUFACTUREI!: Cuder-Hammer MODEL #: 10250T (Note 7)
! HELB OPERABILITY ENVIRONMENT OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO MlICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
Temp: 240 F Temp: 255*F Continuous Continuous N/A N/A (worst case)
QUALIFICATION REPORT: QTF Report TR-010 METHOD: Test EL40101T/123 - 4/13/82
O O O I
l McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 60 j SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O
- LOCATED OUTSIDE CONTAINHENT AND EXPOSED TO HELB ENVIRONMENT i
! EQUIPMENT ID: Terminal Block MANUFACTURER: States MODEL #: ZWM (Note 7)
HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2) 4 Temp: 208 F Temp: 346*F Continuous Continuous N/A N/A (worst case)
QUALIFICATION REPORT: QTF Report TR-028 METHOD: Test EL40101T/124 - 4/13/82
O O O 9
McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 61 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINHENT AND EXPOSED TO HELH ENVIRONMENT EQUIPMENT ID: Terminal Block MANUFACTURER: Buchanan MODEL #: Solid Link 55 & TS (Note 7)
HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO MlICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
Temp: 208 F Temp: 346 F Continuous Continuous N/A N/A 3 (worst case) i l
QUALIFICATION REPORT: QTF Report TR-028 METHOD: Test EL40101T/125 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 62 SU MARY OF ENVIRONMENTAL QUALIFICATION OF CLASS lE EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Terminal Block MANUFACTURER: Stanwick MODEL #: DG & SLS (Note 7)
HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
Temp: 208"F Temp: 346'F Continuous Continuous N/A N/A (worst case) l QUALIFICATION REPORT: QTF Report TR-028 l
l METHOD: Test EL40101T/126 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 63
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Transmitter - signal MANUFACTURER: RIS MODEL #: 5C-1302 (Note 7) i HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
Temp: 130 F Temp: 140 F Continuous Continuous N/A N/A (worst case)
QUALIFICATION REPORT: RIS specification, MCM-1346.00-0010 METil00: Analysis EL40101T/127 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 64 SUPMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINHENT AND EXPOSED TO HELB ENVIRONMENT EQUIPMENT ID: Fuse MANUFACTURER: Littelfuse MODEL #: Normal - Blo & Slo Blo (Note 7)
HELB ENVIRONMENT OPERABILITY OPERABILITY ACCURACY ACCURACY ENVIRONMENT TO WHICH REQUIRED IN DEMONSTRATED REQUIRED DEMONSTRATED (1) QUALIFIED HELB (% OF SPAN) (% OF SPAN)
ENVIRONMENT (2)
Temp: 208 F 208* F Continuous Continuous N/A N/A (worst case) (Note 8)
QUALIFICATION REPORT: Littel fuse derating curve, ESSEM III-A-7 METHOD: Analysis i
EL40101T/128 - 4/13/82
Page 65 Revision 0 MCGUIRE NUCLEAR STATION UNITS 1 AND 2 ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO HELB ENVIRONMENT N_ote 1 The methods employed to evaluate pipebreaks and to determine and resulting .
environmental parameters are discussed in Duke Power Company Report MDS/PDG-77-1. The Evaluation of the Effects of Postulated Pipe Failures Outside Containment for McGuire Nuclear Station.
Note 2 The HELB environment is assumed to exist for 215 hours0.00249 days <br />0.0597 hours <br />3.554894e-4 weeks <br />8.18075e-5 months <br /> based on 30 minutes at the peak temperature after which action by the operator isolates the break and allows Auxiliary Building temperature to decrease to normal ambient in 2 hours2.314815e-5 days <br />5.555556e-4 hours <br />3.306878e-6 weeks <br />7.61e-7 months <br />.
Note 3 Rotork Test Report TR-3025 shows that when the qualified temperature for these valves is exceeded, the torque switches may fail on the next operation of the valves. Since at least one additional operation is available after the valve's temperature qualification has been exceeded, l the valve can be relied upon to move to its safety position.
Note 4 The test was conducted for 30 minutes, however, the Class 1E' solenoids which operate the FWIV's de-energize upon initiation of containment isolation and allow the FWIV's to close within 5 seconds. With the solenoid valves de-energized, the FWIV's will remain in a closed position indefinitely.
Note 5 .
A qualification program is currently being developed for these components.
The result of this program will be reported upon completion. Test completion is expected by 6/30/82.
Note 6 The HELB analysis has identified pipe breaks resulting in higher temgeratures;however,therearenocablesexposedtotemperaturesabove l 330 F.
i Note 7 The components listed are general application devices. These components are installed in metal enclosures and depending on their specific design application, may be located in various areas of the Auxiliary Building.
l This table addresses the qualfication of these components with respect to d the worst-case pipe break environment applicable to the components EL40101T/129 - 4/13/82
i Page 66 Revision 0 location.
Note 8 The qualified operating temperature is based on the maximum current flowing through the fuse or resistor and appropriate fuse or resistor derating.
Note 9 t
The only requirement of the optical isolator is to retain its input integrity during the accident.
Note 10 Accuracy demonstrated is the shift in the actual resistance due to the I change in temperature during the accident.
t, i
l i
I N
t i
i b
l 1
() ,
i EL40101T/130 - 4/13/82
. l i '
4 i
i l
t n
?
i i
I a
P Attachment 4 P
Sunnary of Environmental Qualification f of Class IE Equipment ,
Located Outside Containment and Exposed to the !
Post-LOCA Recirculation Radiation Environment O
e I
h I
t I
f i ;
i f
?
I
{
+
-ee,e---,----w,_ -,m -.- -- .c --,%-- r- .--r~. -, re----,_---,%e---w-m..,,-ew=.,--,%m,-er-- ,, - - --*--t'
ATTACHMENT 4 l
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE
) POST-LOCA RECIRCULATION RADIATION ENVIRONMENT Pg Rev. Pm Rev. Page Rev.
1 0 36 0 2 0 37 0 3 0 38 0 4 0 39 0 5 0 40 0 6 0 41 0 7 0 42 0 8 0 43 0 9 0 44 0 10 0 45 0
~
11 0 46 0 12 0 47 0 13 0 48 0
- 14 0 49 0
! 15 0 50 0 16 0 51 0 17 0 52 0 18 0 53 0 19 0 54 0 0 20 21 22 23 0
0 0
0 55 56 57 58 0
0 0
0 24 0 59 0 25 0 60 0 26 0 61 0 27 0 62 0 28 0 29 0 30 1 31 0 32 0 33 0 34 0 35 0 lO lEL40101T/131 - 6/10/82 gey, j l
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 1
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS lE EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIR0r4 MENT EQUIPMENT ID: Boric Acid Transfer Pump Motors MANUFACTURER: Chempump/ Westinghouse MODEL #: Chempump Model (1) GUH-10K-12H-15 RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID)
These motors are not required to operate in the post-LOCA recirculation radiation environment.
QUALIFICATION REPORT: N/A METHOD: N/A EL4010lT/132 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 2
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. 0 LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO Tile POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: BoronInjectionRecirculation MANUFACTURER: Chenpump/ Westinghouse MODEL #: Chempump Model (1) Pump Motors GUH-3K-751H-15 i
RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID)
These motors are not required to operate in the post-LOCA recirculation radiation environment i
QUALIFICATION REPORT: N/A METHOD: N/A EL40101T/133 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 3
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: Centrifugal Charging Pump Motors MANUFACTURER: Westinghouse, Buffalo MODEL #: 72F44587-1573, 72F44587-(1) 2573, 72F44587-3573, 72F44587-4573 RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID) 6.9X104 RAD 2X108 RAD 1
QUALIFICATION REPORT: WCAP 8754 Rev. 1, WCAP 7829 HETH00: Test and Analysis EL40101T/134 - 4/13/82
O O O l
McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 4 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO T,HE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: Containment Spray Pump Motors MANUFACTURER: Westinghouse, Buffalo MODEL #: 73F56019-1573, 73F56019-(1) 2573, 73F56019-3573, 73F56019-4573 RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED
., (TID) (2) (TID) 5.2X105 RAD 2X10sRAD QUALIFICATION REPORT: WCAP 8754 Rev. 1, WCAP 7829 HETHOD: Test and Analysis EL40101T/135 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 5
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: Fuel Pool Cooling Pump Motors MANUFACTURER: Westinghouse, Buffalo MODEL #: 72F44649-1574, 72F44649-(1) 2574, 72F44650-1576, 72F44650-2S76 I RECIRCULATION RADIATION RADIATION LEVEL TO WHICil i
, ENVIRONMENT QUALIFIED (TID) (2) (TID)
SX103 RAD 2X108 RAD QUALIFICATION REPORT: WCAP 8754 Rev. 1, WCAP 7829 i
MEll100: Test and Analysis i
EL40101T/136 - 4/13/82
O O O .
l McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 6
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. 0 l LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT l
l EQUIPMENT ID: Residual Heat Removal Pump MANUFACTURER: Westinghouse, Buffalo MODEL #: 71F13494-1572, 71F13494-l (1) Motors 2S72, 71F13495-1572, 71F13495-2572 RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID) 4 5.2X105 RAD 2X10sRAD i
I
'l QUALIFICATION REPORT: WCAP 8754 Rev. 1, WCAP 7829 METHOD: Test and Analysis EL40101T/137 - 4/13/82
O O O l
McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 7
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: RHR and Contairment Spray Rooms MANUFACTURER: Allis Chalmers MODEL #: S/N: 1-5133-56450-2-3 (1) Sump Pump Motors RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID) 9.1X104 RAD 1X105 RAD QUALIFICATION REPORT: Radiation Qualification Report / Class 1E Small Powerhouse Motors MCC-1381.05-00-0128 METHOD: Analysis i
EL40101T/138 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 8
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUISIDE CONTAINHENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: Safety Injection Pump Motors MANUFACTURER: Westinghouse, Buffalo MODEL #: 73F69618-1575, 73F69618-(1) 2575, 73F69618-3575, 73F69618-4575 RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID) 2.8X10sRAD 2X108 RAD QUALIFICATION REPORT: WCAP 8754 Rev. 1, WCAP 7829 METHOD: Test and Analysis EL40101T/139 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 9 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. 0 LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: Annulus Ventilation System MANUFACTURER: Joy / Reliance MODEL #: 2YF-273608 (1) Fan Motors RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID) 4X108 RAD 1X107 RAD QUALIFICATION REPORT: Radiation Qualification Report / Class 1E Small Powerhouse Motors l MCC-1381.05-00-0128 l
METHOD: Analysis EL4010lT/140 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 10 SutNARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: Auxiliary Building Filtered MANUFACTURER: Reliance MODEL #: 1YF-882811, 1YF-882812 (1) Exhaust Fan Motors and Spares 1YF-882900, 1YF-882901 RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID)
SX10iRAD 2X10sRAD I
QUALIFICATION REPORT: Radiation Qualification Report / Class IE Small Powerhouse Motors MCC-1381.05-00-0128 METHOD: Analysis EL40101T/141 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 11
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. 0 LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: Diesel Generator Ventilation MANUFACTURER: Joy / Reliance MODEL #: 1YF-273608 (1) Fan Motors RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID)
, 2X10iRAD 1X108 RAD QUALIFICATION REPORT: Radiation Qualification Report / Class 1E Small Powerhouse Motors (MCC-1381.05-00-0128)
METHOD: Analysis EL40101T/142 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 12 SUNIARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINHENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: Fuel Pool Cooling Pump Air MANUFACTURER: Reliance MODEL #: 3YF-882311, 1YF-882311 (1) Handling Unit Motors & Spares RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID) 5X103 RAD 5X105 RAD QUALIFICATION REPORT: Radiation Qualification Report / Class 1E Small Powerhouse Motors (MCC-1381.05-00-0128)
METHOD: Analysis EL4010lT/143 - 4/13/82
O O O
'Mc GUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 13
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. 0 LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: RHR Pump and CS Pump Air MANUFACTURER: Reliance MODEL #: 2YF-882311, 1YF-882311 (1) Handling Unit Motors & Spares RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID) 7X105 RAD 2X10sRAD ;
t QUALIFICATION REPORT: Radiation Qualification Report / Class 1E Small Powerhouse Motors (MCC-1381.05-00-0128)
METHOD: Analysis i
i EL40101T/144 - 4/13/82 7 _ . - , _ . .- . - . - , ,. _ . , , _ _ . ,
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 14 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: 600 Volt Load Centers MANUFACTURER: Gould MODEL #: K-Line (1) Worst case: IELXD & 2ELXD
~
RECIRCULATION RAUIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID) 6X104 RAD 1X105 RAD l
QUALIFICATION REPORT: Report MCM-1312.03-165 METHOD: Test and Analysis (Note 3)
EL40101T/145 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 15 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. 0 LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: Motor Control Centers MANUFACTURER: Nelson Electric MODEL #: Class 10350 (1) Worst case: 1EMXB4 and 2EMXB4 RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID) 6X104 RAD 1X105 RAD QUALIFICATION REPORT: MCC-1314.01-246 METHOD: Test and Analysis EL40101T/146 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 16 Rev. O
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS IE EQUIPMENT LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENTID: Diesel Batteries MANUFACTURER: Nife MODEL #: HIP-4 (1) Worst Case: 1EDGB RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID)
SX103 RAD (Note 4)
QUALIFICATION REPORT: (Note 4)
METHOD: (Note 4)
EL40101T/147 - 4/13/82 i
O O O l
McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 17
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: Diesel Battery Chargers MANUFACTURER: Power Conversion MODEL #: 35-130-100CE (1) Worst Case: 1EDGB Products RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID)
SX103 RAD (Note 4)
QUALIFICATION REPORT: (Note 4)
METHOD: (Note 4)
EL40101T/148 - 4/13/82
- (
i McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 18 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT l EQUIPMENT 10: Potential Transformers, in MANUFACTURER: Westinghouse MODEL #: PIM 75 , ,
(1) RCP Switchgear l
Worst Case: RCP-10 and RCD-20 t EtCIRCULATION RADIATION
, RADIATION ' ' LEVEL TO WHICH QUALIFIED
- i t ,- ,
I(TID) (2). ENVIRONMENTi
- -* / (TID) [,</' -
/ .\
'~
, i t' *;
l 1 , ,
e<
! j l 4X104 RAD 4X104R4D , ,/ f' ,
i
, / , ,
t -
/
l- ,
, !j 2 i .
ll : ' ,[ .s I ,' ,
^
't. ,
\ ll.;
l
' ' - 2
/ : .
} ,
f .
? - s' , .( , f ,,
QUAllFIchTIONREPORT: Report MCM-1312.07-46 -
i I / ,-
/
, , .. 1
, g c ,
4
/.! . /,, <
{
i ,< ,' --
, f ;
s'
, f, HETil00: Test and Analysis '
',4'
( .,
\
, :/ .,
fi {
r , -g
+
,) ,
i 1
g k# r Y
r ,
! . i
- EL40101T/149 - 4/13/82 '~
(
/
s
( _ _ __. _ _ _ _ _ _
l, O O O l McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 19 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: Valve Motor Operators MANUFACTURER: Limitorque MODEL #: SM8 Limitorque Order (1) Order Numbers: 375826-A, 375829-A, 375831-A, 375832-A, 375833-A,
. 375834-A, 375835-A, 379664-B, 379857-A RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID)
SX106 RAD 2X107 RAD (worst case)
QUALIFICATION REPORT: Limitorque Test Report B0058 dated 1/11/80 METHOD: Test EL40101T/150 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 20 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: Valve Motor Operators MANUFACTURER: Limitorque MODEL #: Limitorque Order Numbers:
(1) ,
383584-A and 391179-A RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID)
SX106 RAD 2X10sRAD (worst case)
QUALIFICATION REPORT: Limitorque Test Report B0058 dated 1/11/80 METHOD: Test EL40101T/151 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 21 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO Tile POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: Valve Motor Operators MANUFACTURER: Rotork MODEL #: 7NA2, 11NA2, 14NA2, 16NA2, (1) 30NA2, 40NA2, 70NA2, 90NA2, 93NA2 RECIRCULATION RADIATION RADIATION LEVEL TO milch ENVIRONMENT QUALIFIED (TID) (2) (TI.D)
SX106 RAD 3X107 RAD (worst case)
QUALIFICATION REPORT: Rotork Test Report N14/2 dated 5/70 MElli00: Test EL40101T/152 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 22 SUM ARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. 0 l LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT i EQUIPMENT ID: Valve Motor Operators MANUFACTURER: Rotork MODEL #: 7NA1, 11NA1, 14NA1, (1) 16NA1, 30NAL RECIRCULATION RADIATION l
RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID)
SX108 RAD 2X108 RAD (worst case)
QUALIFICATION REPORT: Rotork Test Report TR-116, dated 10/73 METHOD: Test EL40101T/153 - 4/13/82 I
r
1 O O O
\
McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 23 SUM ARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. 0 LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: Valve Solenoid Operators MANUFACTURER: Valcor MODEL #: V526 (1)
I RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID) i SX108RAD 2X108 RAD (worst case) l QUALIFICATION REPORT: Valcor Test Report QR-52600-515, dated 10/31/77 METHOD: Test s EL40101T/154 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 24 j
SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: Valve Solenoid Operators MANUFACTURER: Valcor MODEL #: V70900-21-3 (1)
, RECIRCULATION RADIATION RADIATION LEVEL TO WHICP ENVIRONMENT QUALIFIED (TID) (2) (TID) 1.6X106 RAD 2X108 RAD i
(worst case) '
i QUALIFICATION REPORT: Valcor Test Report QR-70900-21-1 Rev. A; QR-52600-515, Rev. B; MR70905-21-3-1 HETH00: Similarity and Test 1
EL40101T/155 - 4/13/82
O O
~
O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 25
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. 0 LOCATED OUTSIDE CONTAINHENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: Valve Solenoid Operators MANUFACTURER: ASCO MODEL #: NP8316E34E (1)
RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID) 1.6X108 RAD 2X10sRAD (worst case) l QUALIFICATION REPORT: ASCO Test Report AQS21678/TR METil0D: Test EL40101T/156 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 26 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev, O LOCATED OUTSIDE CONTAINHENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: Valve Stem Mounted Limit Switch MANUFACTURER: NANCO MODEL #: EA-170-302 (1) 4 RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID) 1X106 RAD 2X10sRAD (worst case) l i
1 l
QUALIFICATION REPORT: NAMCO Report QTR-107 dated 3/11/81 METHOD: Test l
l EL40101T/157 - 4/13/82
a O O O l
] McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 27 SU M ARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O i
LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: Valve Stem Mounted Limit Switch MANUFACTURER: NAMC0 MODEL #: EA-180 and EA-740 (1)
RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID) 1X108 RAD 2X10sRAD (worst case) l l
QUALIFICATION REPORT: NAMCO Reports dated 2/22/79 and 9/5/78 METHOD: Test EL40101T/158 - 4/13/82
. __ _ = - - _ _ _ . - .
O O O j
l McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 28 i SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. 0
, LOCATED OUTSIDE CONTAINHENT AND EXPOSED TO THE POST-LOCA RECIRCULATION EN'!IRONMENT l
l EQUIPMENT ID: Motor Operated Dampers MANUFACTURER: Rotork MODEL #: 7A/3MW (1)
RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID) i 3X107 RAD 3X107 RAD j (worst case) i i
i i
! QUALIFICATION REPORT: Rotork Test Reports N11/4, dated 12/70 and TR-116, dated 10/73 1
1 METHOD: By similarity to Rotork NA2 Operator l
i j EL40101T/159 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 29
] Rev. 0 i SumARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT
]
EQUIPMENT ID: Three-Way Solenoid Valve MANUFACTURER: Powers MODEL #: 265-0002 i (1) i i RECIRCULATION RADIATION
- RADIATION LEVEL TO WHICH
- ENVIRONMENT QUALIFIED
l SX105 RAD (Note 5) i t
! QUALIFICATION REPORT: (Note 5) i j METHOD: (Note 5)
EL40101T/160 - 4/13/82
o .
O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 30
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. 1 LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: Annulus Vent Filter Unit MANUFACTURER: Farr MODEL #:
(1) Control Panels RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID)
These panels will be relocated to an area exposed to a total integrated dose of less than lx103 RAD by December 1982. 1 QUALIFICATION REPORT: N/A METHOD: N/A EL40101T/161 - 6/10/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 31 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: ABFU Control Panels MANUFACTURER: Allison MODEL #:
! (1)
RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID)
These panels will be modified to change their safety related control function to a non-safety alarm function.
QUALIFICATION REPORT: N/A j METHOD: N/A l
l l
l EL40101T/162 - 4/13/82 l
l 1 _. _ _ _ _ _ _ _ _ _ . _ __ - . ._ __. . ._- -- -. . ..
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 32 Sum ARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT l EQUIPMENT ID: Proportional Temperature MANUFACTURER: Love Controls MODEL #: 54, 834, 838, 8134, (1) Controller 8160, 8165, 8173 & 8174 RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID) 2X104 RAD (Note 5)
QUALIFICATION REPORT: (Note 5)
METHOD: (Note 5)
EL40101T/163 - 4/13/82
l O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 33
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: High Temperature Detection MANUFACTURER: United Electric MODEL #: 8006-6CS (1) Thermostat RECIRCULATION RADIATION RADIATION LEVEL TO MlICH ENVIRONMENT QUALIFIED (TID) (2) (TID)
SX10sRAD (Note 5)
I QUALIFICATION REPORT: (Note 5)
METHOD: (Note 5)
EL40101T/164 - 4/13/82
O O O ,
McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 34 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT d
EQUIPMENT ID: Resistance Temperature Detector MANUFACTURER: Weed MODEL #: 101-1.2N-A-3-C-6-2-1 (1)
RECIRCULATION RADIATION RADIATION LEVEL TO MlICH ENVIRONMENT QUALIFIED 4
(TID) (2) (TID) i 2X104 RAD (Note 5)
QUALIFICATION REPORT: (Note 5) i HETHOD: (Note 5)
EL40101T/165 - 4/13/82 l
. -. _ _ _ _ _ , . . . . - . ~ . . . _ _ _ _ _ _ _ , . _ . - - _ . - _ _ - . _ . _ . . _ - - . . . . - _ _
O . O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 35
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPriENT ID: Differential Pressure Switch MANUFACTURER: Solon MODEL #: 7PSIDW (1) ,
RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID) 5.2X10 5RAD (Note 5)
QUALIFICATION REPORT: (Note 5)
METHOD: (Note 5)
EL40101T/166 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 36
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. 0 LOCATED OUTSIDE CONTAINHENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: Differential Pressure Switch MANUFACTURER: Solon MODEL #: 7PSIADW (1)
RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID)
SX105 RAD (Note 5)
QUALIFICATION REPORT: (Note 5)
METHOD: (Note 5)
EL40101T/167 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 37
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT 4
EQUIPMENT ID: Limit Switch MANUFACTURER: Micro Switch MODEL #: LSM4N (1)
RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID) 1X108 RAD 1X107 RAD QUALIFICATION REPORT: Micro Switch Report LTR 24407 i
METHOD: Test EL40101T/168 - 4/13/82
O O O
.i McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 38 Sum ARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. 0 LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO Tile POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: Terminal Blocks MANUFACTURER: Buchanan MODEL #: 0721 and P0721 (1)
RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED
QUALIFICATION REPORT: (Note 5)
METHOD: (Note 5)
EL40101T/169 - 4/13/82
O O O l
l McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 39 SUW4ARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. 0 LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: Control and 2KV Power Cable MANUFACTURER: Anaconda MODEL #: EP Insulation and (1) . EP/Hypalon Insulation RECIRCULATION RADIATION RADIATION LEVEL TO WlICH ENVIRONMENT QUALIFIED l
(TID) (2) (TID) 1.1x10sRAD 2X108 RAD t
f QUALIFICATION REPORT: Anaconda Test Reports F-C4350-2 and F-C4350-3 METHOD: Test EL40101T/170 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 40
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: Control Cable MANUFACTURER: Brand Rex MODEL #: XLPE (1)
RECIRCULATION RADIATION RADIATION LEVEL TO WHICH '
ENVIRONMENT QUALIFIED
- (TID) (2) (TID) 1.1X108 RAD 2X10sRAD QUALIFICATION REPORT: Brand Rex Test Report FC5120-1 and FC5120-3 METHOD: Test EL4010lT/171 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 41 SulNARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POSI-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: control, i nstrumentation MANUFACTURER: Okonite MODEL #: EP Insulation (1) cable RECIRCULATION RADIATION
! RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID) 1.1X10sRAD 2X10sRAD QUALIFICATION REPORT: Okonite Test Reports FN-1, G-3, N-1, 110E and 141 METil00: Test EL40101T/172 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 42 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINHENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: Instrumentation Cable MANUFACTURER: Okonite MODEL #: Hypalon (1) i RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID) 1.1X108 RAD 2X10sRAD i
QUALIFICATION REPORT: Okonite Test Report 110E MFTHOD: Test EL40101T/173 - 4/13/82
O O~ O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 43 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. 0 l LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: Instrumentation Cable MANUFACTURER: Brand Rex MODEL #: PVC (1) i RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID) 3X107 RAD SX107 RAD QUALIFICATION REPORT: Duke Test Report TR017 METHOD: Test i
EL4010lT/174 - 4/13/82 l
I
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 44
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: Instrumentation Cable MANUFACTURER: Okdnite MODEL #: Tefzel 280 (1)
RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID) l l
1.1X108 RAD 2X108 RAD QUALIFICATION REPORT: Okonite Test Report K-0-1 METil00: Test i
l EL40101T/175 - 4/13/82
O O O 4
McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 45
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS lE EQUIPMENT Rev. 0 LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT ,
l EQUIPMENT ID: Instrumentation Cable MANUFACTURER: Samuel Moore MODEL #: EP/Hypalon Insulation (1)
RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID) 1.1X108 RAD 2X10sRAD l
l
. QUALIFICATION REPORT: Samuel Moore Test Report F-C3683 METHOD: Test i
l EL40101T/176 - 4/13/82 1
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 46 SIM ARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENTID: Instrumentation Cable MANUFACTURER: Samuel Moore MODEL #: PVC (1) i '
! RECIRCULATION RADIATION RADIATION LEVEL TO MlICH ENVIRONMENT QUALIFIED (TID) (2) e, (TID) >..'-
{ , j l- :\ y ll 1 1 7 ?
i
, 3X107 RAD. SX10 RAD , _
3- ;
I
~
I / ;
e i / ,
f ,
L - ,
) < ~
l . < e QUALIFICATION REPORT: Duke Test Report TR017 <
i '
/
MET 1100: Test
, j..,) 'i ,
el'
-) ;
j
[a / ,
e j
f
'. s
' '.j i l EL40101T/177 - 4/13/82 <
I
.s
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 47 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. 0 ,
LOCATED OUTSIDE CONTAINHENT AND EXPOSED TO THE POSI-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: Fuse MANUFACTURER: Bussmann MODEL #: FNA (1) (Note 6)
RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID) 1 1.6X108 RAD 1.6X106 RAD (worst case)
QUALIFICATION REPORT: QTF Report TR-040 METHOD: Test EL40101T/178 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 48 SU MARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: Fuse Block MANUFACTURER: Bussmann MODEL #: 3792 (1) (Note 6)
RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID) 1.6X106 RAD 1X101" RAD (worst case) l l
QUALIFICATION REPORT: ESSEM File IV-A-3 i
HETH00: Analysis EL4010lT/179 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 49 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: Fuse Block MANUFACTURER: Bussmann MODEL #: 4439 (1) (Note 6) t RECIRCULATION RADIATION RADIATION LEVEL TO milch ENVIRONMENT QUALIFIED (TID) (2) (TID) 1.1X103 RAD 1X10" RAD (worst case) i QUALIFICATION REPORT: ESSEM File IV-A-3 MElll00: Analysis EL4010lT/180 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 50
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. 0 LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRGNMENT EQUIPMENT ID: Fuse Block MANUFACTURER: Bussmann MODEL #: 4575 (Note 6)
RECIRCULATION RADIATIDN RADIATION LEVEL TO WHICH ENVIRONMFNT QUALIFIED (TID) (2) (TID) 1X10 8RAD 1X1018 RAD (worstcase) i QUALIFICATION REPORT: ESSEM File IV-A-3 HETH00: Analysis EL4010lT/181 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 51 ;
SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: Indicating Light MANUFACTURER: Cutler-Hammer MODEL #: E29 (1) (Note 6)
RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ,
ENVIRONMENT QUALIFIED (TID) (2) (TID) 5X105 RAD SX105 RAD (worst case)
QUALIFICATION REPORT: QTF Report TR-040 HETHOD: Test EL40101T/182 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 52 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: Relay MANUFACTURER: Cutler-Hammer MODEL #: D23 (1) (Note 6) >
t RECIRCULATION RADIATION 4 RADIATION LEVEL TO WHICh ENVIRONNENT QUALIFIED (TID) (2) (TID) 1X108 RAD 1X106 RAD (worstcase)
QUALIFICATION REPORT: QTF Report TR-040 METil00: Test EL40101T/183 - 4/13/82
O O O t
McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 53 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: Relay MANUFACTURER: Cutler-Hammer MODEL #: D26 .
(1) (Note 6)
RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID) 1.1x103 RAD 1.1x103 RAD (worstcase) (Note 7)
QUALIFICATION REPORT: QTF Report TR-040 METil00: Test EL40101T/184 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 54 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: Surge Suppressor MANUFACTURER: General Semiconductor MODEL #: Transzorb (1) (Note 6)
RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID)(2) (IID) 1.6X108 RAD 2X107 RAD (worst case)
QUALIFICATION REPORT: General Semiconductor Specification, ESSEM File III-C-1 METHOD: Analysis EL4010lT/185 - 4/13/82
O O O 4
McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 55 !
SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT ,
EQUIPMENT ID: Selector Switch MANUFACTURER: Cutler-Hammer MODEL #: 10250T (1) (Note 6) i RECIRCULATION RADIATION RADIATION - LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID)
SX105 RAD SX105 RAD !
(worst case)
QUALIFICATION REPORT: QTF Report TR-040
- HETH00
- Test I
(
EL40101T/186 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 56
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: Terminal Block MANUFACTURER: States MODEL #: ZWM (1) (Note 6)
RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED '
(TID) (2) (TID) f 1.8X108 RAD 2.6X107 RAD (worst case)
QUALIFICATION REPORT: ESSEM File IV-B-4 & IV-B-5 l METHOD: Analysis EL4010lT/187 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 57
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: Switch and Indicating Light MANUFACTURER: Cutler-Hammer MODEL #: E30 (1) (Note 6)
RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID) 1.8X105 RAD 1.9X105 RAD (worst case)
QUALIFICATION REPORT: QTF Report TR-040 MFTil00: Test EL4010lT/188 - 4/13/82
O O O ,
McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 58
SUMMARY
OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPNENT ID: Fuse Block MANUFACTURER: Bussmann MODEL #: 2808 (1) (Note 6) ,
RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID) 1.1X103 RAD 7X108 RAD (worst case)
QUALIFICATION REPORT: ESSEM File IV-A-11 METHOD: Analysis EL40101T/189 - 4/13/82
l 0 o o McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 59 SU MARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. O LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: Terminal Block MANUFACTURER: Stanwick MODEL #: SLS (1) (Note 6)
RECIRCULATION RADIATION .
RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID) (2) (TID) 2X10iRAD 3x105 RAD (worst case) i QUALIFICATION REPORT: ESSEM file IV-B-1 METil00: Analysis EL4010lT/190 - 4/13/82
O O O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 Page 60 SUMARY OF ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT Rev. 0
. LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION ENVIRONMENT EQUIPMENT ID: Fuse MANUFACTURER: Littelfuse MODEL #: Slo-Blo (1) (Note 6)
RECIRCULATION RADIATION RADIATION LEVEL TO WHICH ENVIRONMENT QUALIFIED (TID)(2) (TID) 1 3X105 RAD (Note 7)
(worst case)
QUALIFICATION REPORT: (Note 7) i HETH00: (Note 7)
EL40101T/191 - 4/13/82
Pags 61 Revision 0 MCGUIRE NUCLEAR STATION - UNITS 1 AND 2 3
(V ENVIRONMENTAL QUALFICATION OF CLASS 1E EQUIPMENT LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO POST-LOCA RECIRCULATION RADIATION ENVIRONMENT Note 1 Class IE equipment that is exposed to the post-LOCA recirculation radiation environment has been evaluated for proper radiation qualification and is included in this table if it is ex30 sed to a total integrated dose equal to or greater than 1 x 103 RAD. A total integrated dose-(i.e., forty year normal plus one year accident radiation dose) of less than 1 x 103 RAD is considered negligible since no materials have been identified at McGuire that exhibit a significant aging mechanism when exposed to less than 1x103 RAD.
Note 2 The recirculation radiation environment consists of the forty year normal operating radiation dose plus the dose received from one year of post-LOCA reactor coolant recirculation.
Note 3 The McGuire 600 volt load centers are qualified by similarity to 600 volt load centers at Oconee Nuclear Station as reported in Report Number p OM-301-80.
V Note 4 Radiation testing of this equipment is not required for levels below 1x104 RAD per Section 8.1 of IEEE 535-1979.
Note 5
, A qualification program is currently in progress for these components. The results of this program will be reported upon receipt and review of the qualification documentation, which is expected in August 1982.
Note 6 The components listed are general application devices. These components
( are installed in metal type enclosures and depending on their specific design application, may be located in various areas of the Auxiliary Building. This table addresses the qualification of these components with respect to the worst-case radiation environment (40 year normal dose plus 1 year post-LOCA) applicable to the components location.
EL40101T/61 - 4/13/82 F
Page 62 Rev. 0 O Note 7 These components are located in enclosures in both Units 1 and 2.
Presently, the components exposed to a post-LOCA recirculation radiation greater than 1x103 RAD and used in Unit 1 Class 1E circuitry are qualified by TR-040. The radiation qualification of Unit 2 components is in progress. The results of this qualification program will be provided upon completion by Duke Power Company.
i
- O O
EL40101T/193 - 4/13/82
Attachment 5 Duke Power Company Position on the Category 11 Guidelines of NUREG 0588 l
O ATTACHMENT 5 DUKE POWER COMPANY POSITION ON THE CATEGORY II GUIDELINES OF NUREG 0588 i
Page Rev. Page Re v. Page Rev.
1 0 2 0 3 0 4 0 5 1 6 0 7 0 8 1 9 1 i 10 2 11 1 12 2 l
O 13 14 15 0
1 1
l l
16 1 17 0 i 18 1
) 19 1 l
20 0 21 1 r 22 0 f
O w- --,w - - , , ,w--- -
-,- _,------,-,,,---n,-- - - - - - - . - - - - - -
- = _ _ . .. _- -.__-__ _ _ __ - _ - .
O MCGUIRE NUCLEAR STATION NUREG 0588 CATEGORY II DUKE POWER COMPANY GUIDELINES POSITION 1.0 ESTABLISHMENT OF THE QUALIFICATION PARAMETERS FOR DESIGN BASIS EVENTS 1.1 Temperature and Pressure Conditions Inside Containment -
Loss-of-Coolant 1.1.1 The time-dependent temperature The containment structural design and pressure, established for the has been based on the results on design of the containment struc- an analysis performed by Westing-ture and found acceptable by the house employing the methodology staff, may be used for environ- described below. The results of mental qualification of equip- this analysis are reported in Sec-ment. tion 6.2 of the FSAR.
1.1.2 Acceptable methods for calculat- Westinghouse employs the methodology ing and establishing the contain- described in WCAP-8312A for calculat-ment pressure and temperature ing the LOCA mass and energy release.
envelopes to which equipment O should be qualified are summarized below. Acceptable methods for cal-Appendix A to NUREG-0588 indicates that this methodology is acceptable to the Staff.
culating mass and energy release rates are summarized in Appendix A.
Pressurized Water Reactors (PWRs)
Ice Condenser Containment - Calcu- Westinghouse conforms to the Staff late LOCA containment environment position for Ice-Condenser Plants using LOTIC or equivalent industry by employing LOTIC to calculate the codes. Additional guidance is pro- containment transient following LOCA.
vided in SRP Section 6.2.1.1.B, NUREG-75/087.
1.1.3 In lieu of using the plant-specific Plant-specific profiles are the containment temperature and pressure basis for McGuire equipment quali-design profiles for BWR and ice ficatica testing.
condenser types of plants, the gen-eric envelope shown in Appendix C may be used for qualification test-ing.
O 1
b NUREG 0588 CATEGORY II DUKE POWER COMPANY GUIDELINES POSITION 1.1.4 The test profiles included in Plant specific profiles are the basis Appendix A to IEEE Std. 323-1974 for McGuire equipment qualification should not be considered an ac- testing. It should be noted that the ceptable alternative in lieu of IEEE 323-1974, Appendix A temperature using plant-specific containment and pressure profiles envelope the temperature and pressure design worst-case McGuire containment acci-profiles unless plant-specific dent temperature and pressure condi-analysis is provided to verify tions and have been used by some manu-the adequacy of those profiles. facturers for generic qualifications.
1.2 Temperature and Pressu_re Conditions Inside Containment -
Main Steam Line Break (MSLB) 1.2.1 Where qualification has not The environmental qualification been completed, the environmen- testing for equipment located in-tal parameters used for equip- side containment has been completed.
ment qualification should be calculated using a plant-speci-fic model based on the staff-O approved assumptions discussed in Item 1 of Appendix B.
1.2.2 Models that are acceptable for Westinghouse employs the methodology calculating containment parameters described in WCAP 8822 for calculat-are listed in Section 1.1.2. ing the mass and energy release fol-lowing a Main Steam Line Break (MSLB).
At the specific request of Duke, Westinghouse has completed the mass and energy release calculations assus-ing no entrainment. Westinghouse conforms to the Staff position for Ice-Condenser Plants by employing LOTIC to calculate the containment transient l
following MSLB.
1 l
1.2.3 In lieu of using the plant- Plant specific profiles are the j
specific containment temperature basis for McGuire equipment quali-and pressure design profiles for fication testing.
BWR and ice condenser plants, the generic envelope shown in Appendix C may be used.
O 2
O NUREG 0588 CATEGORY II DUKE POhT.R COMPANY GUIDELINES POSITION i 1.2.4 The test profiles included in Plant specific profiles are the basis Appendix A to IEEE Std. 323-1974 for McGuire equipment qualification should not be considered an testing. It should be noted that the acceptable alternative in lieu of IEEE 323-1974, Appendix A temperature using plant-specific containment and pressure profiles envelope the temperature and pressure design worst-case McGuire containment accident profiles unless plant-specific temperature and pressure conditions analysis is provided to verify the and have been used by some manufacturers adequacy of those profiles. for genric qualification.
1.2.5 Where qualification has been The environmental qualification tests completed but only LOCA condi- for equipment installed inside the tions were considered, then it containment at McGuire that is required must be demonstrated that the to function during and following a MSLB LOCA qualification conditions envelope the maximum calculated MSLB exceed or are equivalent to the conditions.
maximum calculated MSLB conditions.
1.3 Effects of Chemical Spray O
G 1.3.1 The effects of caustic spray Chemical spray is included in quali-should be addressed for the fication tests for equipment located equipment qualification. The inside the containment provided the
- concentration of caustics used equipment is required to operate in for qualification should be the spray environment.
equivalent to or more severe than those used in the plant containment spray system.
1.3.2 If the chemical composition of In the McGuire containment spray the caustic spray can be affected system, no single failure can occur by equipment malfunctions, the that will result in a more severe most severe caustic spray environ- spray solution composition than the ment that results from a single anticipated composition.
failure in the spray system should be assumed. See SRP Section 6.5.2 (NUREG-75/087), paragraph II, Ites (e) for caustic spray solution guidelines.
O 3
NUREG 0588 CATEGORY II DUKE POWER COMPANY GUIDELINES POSITION 1.4 Radiation Conditions Inside and Outside Containment The radiation environment for The calculated radiati9n environ-qualification of equipment should ment is based on the 40 year normal be based on the normally expected operating dose plus the appropriate radiation environment over the DBA dose, equipment qualified life, plus that associated with the most severe design basis accident (DBA) dur-ing or following which that equip-ment must remain functional. It should be assumed that the DBA-related environmental conditions occur at the end of the equipment qualified life.
-The sample calculations in Appen-dix D and the following positions provide an acceptable approach .
for establishing radiation limits i for qualification. Additional l C) radiation margins identified in Section 6.3.1.5 of IEEE Std.
l 323-1974 for qualification type testing are not required if these methods are used.
1.4.1 The source term to be used in The radiation environments through-determining the radiation environ- out the station following a DBA ment associated with the design LOCA are determined assuming instant-basis LOCA should be taken as an aneous release from the fuel to the instantaneous release from the fuel containment of 100% of the noble gas to the atmosphere of 100 percent inventory, 50% of the core iodine in-of the noble gases, 50 percent of ventory, and 1% of the remaining core the iodines, and 1 percent of the fission product inventory. This source remaining fission products. For term is used to derive radiation levels all other non-LOCA design basis for all equipment requiring radiation accident conditions, a source tera qualification. The release fractions involving an instantaneous release are consistent with TID-14844 and from the fuel to the atmosphere of NUREG 0578, Item 2.1.6 b.
10 percent of the noble gases (ex-cept Kr-85 for which a release of 30 percent should be assumed) and 10 percent of the iodines is acceptable.
O 4
=- - - . -
e O NUREG 0588 CATEGORY II GUIDELINES DUKE POWER COMPANY POSITION 1.4.2 The calculation of the radiation All radioactivity released initially environment associated with de- remains within the containment. For sign basis accidents should take conservatismat rborne radioactivity is into account the time-dependent assumed to be homogeneously distributed transport of released fission throughout the containment at the y products within various regions initiation of the accident. Recircula-of containment and auxiliary tion of water f rom the containment sump structures, is assumed to begin at 10 minutes into the accident. Prior to initiation of recirculation, normal radiation environments are assumed to exist throughout the station outside con-tainment. The time-dependent transport mechanisms considered are consistent with NUREG 0578, item 2.1.6b.
1.4.3 The initial distribution of acti- See the response to 1.4.2 above.
vity within the containment should be based on a mechanistically ra-O tional assumption. Hence, for com-partmented containments, such as in a BWR, a large portion of the source should be assumed to be in-itially contained in the drywell. l The assumption of uniform distri-bution of activity throughout the containment at time zero is not appropriate.
i l 1.4.4 Effects of ESF systems, such as To increase the conservatism of the containment sprays and contain- calculated radiation values, no credit ment ventilation and filtration
- is taken for removal processes such as systems, which act to remove air- containment spray, filters, or natural borne activity and redistribute deposition. The only removal mechanism activity within containment, should considered is radioactive decay.
be calculated using the same as-i sumptions used in the calculation i of offsite dose. See SRP Section i 15.6.5 (NUREG-75/087) and the re-lated sections referenced in the Appendices to that section.
!O 5 i Revision 1
O NUREG 0588 CATEGORY II DUKE POWER COMPANY GUIDELINES POSITION 1.4.5 Natural deposition (i.e., plate- The assumption of an instantaneous out) of airborne activity should plate-out of 50% of the iodine released be determined using a mechanistic from the core is not used. As stated model and best estimates for the above, natural deposition is not used model parameters. The assumption in the development of post-LOCA ra-of 50 percent instantaneous plate- diation levels.
out of the iodine released from the core should not be made. Re-moval of iodine from surfaces by steam condensate flow or washoff by the containment spray may be assumed if such effects can be justified and quantified by an-alysis or experiment.
1.4.6 For unshielded equipment located The gamma dose in containment is that in the containment, the gamma dose dose calculated at the centerpoint of and dose rate should be equal to the containment. Shielding effects are the dose and dose rate at the considered for equipment located out-centerpoint of the containment side the crane wall and in the accumu-plus the contribution from loca- lator rooms.
O' tion dependent sources such as the sump w'tera and plate-out, un-less it can be shown by analyses that location and shielding of the equipment reduces the dose and dose rate.
1.4.7 For unshielded equipment, the beta Beta dose calculations are consistent doses at the surface of the equip- with the gamma dose calculations as ment should be the sum of the air- discussed above. Also see the response borne and plate-out sources. The to 1.4.8 below.
airborne beta dose should be taken as th2 beta dose calculated for a point at the containment center.
1.4.8 Shielded components need be All Class IE equipment located in-qualified only to the gamma radi- side containment that is required to ation levels required, provided mitigate a LOCA, MSLB, or HELB in-an analysis or test shows that side the containment has sufficient
- the sensitive portions of the shielding to prevent the exposure of l
O l 6
O NUREG 0588 CATEGORY II DUKE P0hT.R COMPANY GUIDELINES POSITION 1.4.8 (Continued) (Continued) component or equipment are not ex- any organic materials associated posed to beta radiation or that with this equipment to a beta ra-the effects of beta radiation diation environment.
heating and ionization have no deleterious effects on component performance.
1.4.9 Cables arranged in cable trays See the response to 1.4.8 above.
in the containment should be as- Additionally, armored cables are used sumed to be exposed to half the in safety-related applications inside beta radiation dose calculated containment at McGuire; therefore, for a point at the center of the beta radiation effects on cable insula-containment plus the gamma ray tion is considered negligible.
dose calculated in accordance with Section 1.4(6). This reduction in beta dose is allowed because of the localized shielding by other cables plus the cable tray itself.
O 1.4.10 Paints and coatings should be See the response to 1.4.6 and 1.4.7 assumed to be exposed to both beta above.
and gamma rays in assesing their resistance to radiation. Plate-out activity should be assumed to remain on the equipment surface unless the effects of the removal mechanisms, such as spray wash-off or steam condensate flow, can l be justified and quantified by analysis or experiment.
1.4.11 Components of the emergency Radiation levels outside containment core cooling system (ECCS) lo- following a design basis LOCA are cated outside containment (e.g., based on the release fractions dis-pumps, valves, seals, and elec- cussed in 1.4.1 above. This released trical equipment) should be quali- activity is assumed to be retained fied to withstand the radiation in and diluted by water from safety 0 ,
NUREG 0588 CATEGORY II DUKE POWER COMPANY :
GUIDELINES POSITION i 1.4.11 (Continued) (Continued) ,
equivalent to that penetrating injection and ice bed melt. Where the containment, plus the exposure appropriate, radiation penetrating from the sump fluid using assump- the containment is included. This tions consistent with the require- analysis is consistent with that re-ments stated in Appendix K to 10 quired by NUREG 0578, Item 2.1.6b.
CFR Part 50.
1.4.12 Equipment that may be exposed to Class lE equipment that is exposed radiation doses below 104 rads to a radiation environment is evalu- 1 should not be considered to be ated for proper radiation qualifica-exempt from radiation qualifi- tion.
cation, unless analysis supported by test data is provided to verify that these levels will not degrade the operability of the equipment below acceptable values.
1.4.13 The Staff will accept a given The calculated radiaiton-environ-component to be qualified pro- ments for McGuire are comparable vided it can be shown that the to those values presented in component has been qualified to Appendix D.
integrated beta and gamma doses which are equal to or higher than those levels resulting from an analysis similar in nature and scope to that included in Appendix D (which uses the source term given in item (1) above), and that the component incorporates appropriate factors pertinent to the plant design and operating characteristics, as given in these general guidelines.
1 l
1.4.14 When a conservative analysis has See the response to 1.4.13 above.
not been provided by the applicant for staff review, the staff will use the radiation environment guide-
. lines contained in Appendix D, suit-l ably corrected for the differences in r reactor power level, type, contain-I ment size, and other appropriate l factors.
( 8 Revision 1
O NUREG 0588 CATEGORY II DUKE POWER COMPANY GUIDFLINES POSITION 1.5 Environmental Conditions For Out-Side Containment 1.5.1 Equipment located outside con- Equipment located outside the con-tainment that could be subjected to tainment that could be subjected to high-energy pipe breaks should be a postulated pipe break environment qualified to the conditions result- and that is required to either miti-ing from the accident for the dur- gate the break or bring the unit to ation required. The techniques a safe shutdown condition is qualified to calculate the environmental for the pipe break environment.
parameters described in Sections 1.1 through 1.4 (Category II) above The methods employed to evaluate pipe should be applied. breaks and to determine the resulting environmental parameters are discussed in Duke Power Company Report MDS/PDG -
77 - 1, The Evaluation of the Effects of Postulated Pipe Failures Outside Containment for McGuire Nuclear Station.
1.5.2 Equipment located in general Equipment located in general plant plant areas outside containment areas outside containment and not
~'N where equipment is not subjected exposed to a DBA environment is de-k',,) to a design basis accident envi- signed and/or qualified for the l ronment should be qualified to environmental conditions postulated to I
the normal and abnormal range of occur at the equipment location as 1 environmental conditions postu- derived f rom the Plant environmental
~
lated to occur at the equipment 'desi gn basi s.
location.
1.5.3 Same as Category I; or, there For general plant areas outside con-may be designs where a loss of the tainment where the area temperature environmental support system may could be postulated to exceed the expose some equipment tc environ- design temperature of the equipment ments that exceed the qualified in that area, a temperature monitoring limits. For these designs, appro- system is provided.
priate monitoring devices should __. ~-
I be provided to alert the operator l that abnormal conditions exist and
- to permit an assessment of the con-ditions that occurred in order to determine if corrective action, such p).
I as replacing any affected equipment, is warranted.
9 Revision 1 i
l l
i 1
O NUREG 0588 CATEGORY II DUKE P0kT.R COMPANY GUIDELINES POSITION 2.0 QUALIFICATION METHODS 2.1 Selection of Methods 2.1.1 Qualificatiou methods should a. For equipment required to perform conform to the requirements de- a safety function in a postulated fined in IEEE Std. 323-1971. LOCA, MSLB, HELB, or post-LOCA 1 recirculation radiation environ-ment, the environmental qualifica-tion methods meet the intent of IEEE 323-1971 requirements.
- b. For the equipment not required to oper-ate in a harsh accident environment, l1 environmental qualification per IEEE - 2 323-1971 was not required. Rather, the
~
equipment was designed and analyzed to assure that it maintains its required performance capability for the environ-
~ mental conditions postulated to occur at 2
the equipment location as derived from i the environmental design basis, in general, factory performance / functional s
testing at ambient conditions is completed on equipment prior to shipping and, for some items of equipment, a production ur.It may be tested at the specified maximum ambient temperature. These pro-duction tests, together with the design specification for the equipment, which specifies the environmental design 2 parameters and engineering analysis, provides sufficient assurance of equipment capability in accordance with the Staff posi tion under i tem 2. .'
2.1.2 The choice of the methods selected For equipment located inside contain-is largely a matter of technical ment that is re. quired to' perf orm a safety judgement and availability of in- function in a postulated LOC!., MSLB, or HELB formation that supports the con- environment, environmental qualification is clusions reached. Experience has in general by testing. -
shown tha'. qualification of equip-ment subjected to an accident envi- For equipment located outside containment
- N 10 Revision 2
( NUREG 0588 CATEGORY II DUKE POWER COMPANY GUIDELINES POSITION 2.1.2 (Continued) (Continued) ronment without test data is not that is required to perform a safety adequate to demonstrate functional function in a postulated HELB or post- 1 operability. In general, the staff LOCA recirculation radiation environ-will not accept analysis in lieu of ment, qualification is in general by test data unless (a) testing of the testing, analysis, manufacturer's spe-component is impractical due to cific design, and/or combinations of size limitations, and (b) partial these methods.
type test data is provided to sup-port the analytical assumptions and The qualification method is provided conclusions reached. in the equipment tables.
2.1.3 The environmental qualification of equipment exposed to DBA environ-ments should conform to the follow-ing positions:
The basis should be provided for The required duration of operability the time iaterval required for is based on assumptions in the FSAR operability of this equipment. accident analysis, system requirements, and/or the time the environment is l
/~'N expected to remain outside its normal I (m / range following a DBA.
l The required and demonstrated duration of the safety function of equipment subject to a LOCA, MSLB, HELB, or post-LOCA recirculation radiation environ- 1 ment is provided in the equipment tables.
The operability and failure cri- The primary purpose of equipment quali-teria should be specified and the fication is to reduce the potential safety margins defined. for common-mode failures due to post-ulated environmental conditions. Equip-ment will therefore be considered to have
[ failed the test and/or analysis if the functional requirements identified in the attached tables cannot be met, unless an investigation can establish that the failure mechcnism is not of common-mode origin or that plant specific analyses can demonstrate that the reduced capabi-( lity is acceptable.
l In certain cases, failure criteria, per se, l was not specified prior to qualification I testing; however, the failure of the equip-ment would have been an obvious failure y ) (i.e., equipment would not function).
Margin is discussed in Section 3.0.
11 Revision 1 l
[
l____________________
O O NUREG 0588 CATEGORY II DUKE POWER COMPANY GUIDELINES POSITION 2.1.3a Equipment that must function in Equipment that must perform a safety order to mitigate any accident function in a LOCA, MSLB, HELB, or should be qualified by test to post-LOCA recirculation radiation en- 1 demonstrate its operability for vironment, is qualified by test and/or the time required in the environ- analysis. The acceptance criteria for mental conditions resulting from that accident.
the test and/or analysis is that the safety-related function must be demon-l2 strated for the specified duration of operability in the postulated accident environment.
2.1.3b Any equipment (safety-related In general, the failure of safety-or non-safety-related) that need related equipment that is not re-not function in order to mitigate quired to perform a safety function in any accident, but that must not a postulated harsh accident environment fail in a manner detrimental to is not detrimental to plant safety.
plant safety should be qualified by test to demonstrate its cap- The effects and consequences of adverse ability to withstand any accident environments on non-safety related environment for the time during equipment has been identified as a which it must not fail. Category I item under NUREG-0585 "TMI-2 Lessons Learned Task Force s Final Report" and will be resolved as part of the action plan set up to address Recommendation #9. Addition-ally, the subject of non safety-related control systems was addressed in IE ,
2.1.3c Equipment that need not function Where an item of safety-related equip-in order to mitigate any accident ment is located in an area such that and whose failure in any mode in it may be exposed to a LOCA, MSLB, HELB, any accident environment is not or post-LOCA recirculation radiation en- 1 detrimental to plant safety need vironment but is not required to perform only be qualified for its non- any safety-function as a result of the accident service environment. breaks, the failure of such equipment, due to the adverse environment, has been l
Although actual type testing is determined not to prejudice the safety preferred, other methods when functions of other equipment claimed l justified may be found acceptable. in th, accident analysis.
l The bases should be provided for concluding that such equipment is not required to function in order to mitigate any accident, and that ,
its failure in any mode in any l accident environment is not detri-mental to plant safety.
O -
12 Revision 2
O
\j NUREG 0588 CATEGORY II DUKE POWER COMPAhT GUIDELINES POSITION 2.1.4 For environmental qualification of As stated in the response to Item equipment subject to events other 2.1.Ib, the design specification re-than a DBA, which result in abnor- quirements for equipment not required mal environmental conditions, act- to function in a harsh environment I ual type testing is preferred. together with factory performance /
However, analysis or operating functional tests and engineering history, or any applicable com- analyses (including some cases where bination thereof, coupled with the testing is performed at maximum partial type test data may be ambient conditions) provide the re-found acceptable, subject to the quisite assurance for equipment ca-applicability and detail of in- pability.
formation provided.
2.2 Qualification by Test 2.2.1 The failure criteria should be The response to Item 2.1.3 is appli-established prior to testing. cable for equipment required to operate in a LOCA, MSLB, EELB, or post-LOCA 1 recirculation radiation environment.
2.2.2 Test results should demonstrate As stated in Item 2.1.la environmental
,,/ that the equipment can perform its qualification demonstrates the cap-required function for all service ability of equipment to perform safety-conditions postulated (with margin) related functions when subject to the during its installed life. consequential adverse environment of LOCA, MSLB, HELB, or post-LOCA recir- I culation radiation. For equipment not required to operate in a harsh environ-ment, the response to Item 2.1.Ib applies.
The requirement to demonstrate this capability during the installed life implies an addressment of aging. This subject is discussed under Item 4. The subject of margin is discussed under Item 3.
2.2.3 The items described in Section 5.2 The Duke Power Company position with of IEEE Std. 323-1971 supplemented respect to Section 5 of IEEE 323-1971 is by items (4) through (12) below provided in the response to Item 2.3.3.
constitute acceptable guidelines for establishing test procedures.
l l
O 13 Revision 1 i
I l
1
NUREG 0588 CATEGORY II DUKE POWER COMPANY GUIDELINES POSITION 2.2.4 When establishing the simulated In general, a single profile, envelcp-environmental profile for quali- ing both MSLB and LOCA, is used for fying equipment located inside qualification of equipment located containment, it is preferred that inside containment which is required a single profile be used that enve- to perform a safety function to mitigate lopes the environmental conditions a LOCA or MSLB. The exceptions to the resulting from any design basis use of a single qualification envelope event during any mode of plant for LOCA and MSLB are, in general, when:
operation (e.g., a profile that envelopes the conditions produced (a) A component is only required by the main steamline break and to mitigats against either the loss-of-coolant accidents). LOCA or MSLB. In such a case, qualification has been completed to conditions enveloping the possible consequences inside containment from the single event and additionally, it is verified that failure of the component in any other more limit-ing environment will not prejudice any safety-related function (b) The resulting test conditions would unjustifiably exceed acceptable conservatism.
2.2.5 Equipment should be located above In general, safety-related equipment flood level or protected against is located above the maximum post-submergence by locating the equip- LOCA water level. The exceptions to ment in qualified watertight en- this design philosophy are certain closures. Where equipment is motor operated valves and associated located in watertight enclosures, cables. The submerged valves are dis-qualification by test or analysis cussed in FSAR Section 15.4.1.3.
should be used to demonstrate the adequacy of such protection. Where equipment could be submerged, it should be identified and demon-strated to be qualified by test for the duration required.
n a
14
NUREG 0588 CATEGORY II DUKE POWER COMPANY GUIDELINES POSITION i
2.2.6 The temperature to which equipment In performing qualification tests for is qualified, when exposed to the equipment exposed to a LOCA, MSLB, or simulated accident environment, HELB environment, the external environ-should be defined by thermocouple ment temperature is measured as close to readings on or as close as prac- the equipment surface as practicable.
tical to the surface of the compo-nest being qualified.
If there were no thermocouples located near the equipment during the tests, heat transfer analysis should be used to determine the temperature at the component.
(Acceptable heat transfer analysis methods are provided in Appendix B.)
2.2.7 Performance characteristics of Where the safety-related function of equipment should be verified the equipment requires operation in before, after, and periodically the LOCA, MSLB, HELP, or post-LOCA during testing throughout its recirculation radiation environment, i
range of required operability. the equipment performance before, dur-ing (where practical) and after expo-
! sure to the simulated event is veri-fled.
2.2.8 Caustic spray should be incor- The response to Item 1.3.1 is appli-porated during simulated event cable for equipment located inside con-testing at the maximum pressure tainment and qualified by test to oper-and at the temperature conditions ate in the LOCA or MSLB environment.
that would occur when the onsite spray systems actuate.
2.2.9 The operability status of equipment The response to Item 2.2.7 is appli-should be monitored continuously cable.
during testing. For long-term testing, however, monitoring at discrete intervals should be justi-fied if used.
2.2.10 Expected extremes in power supply Class IE equipment is supplied by voltage range and frequency should guaranteed stabilized power supplies.
It applied during simulated event As a c-; sequence, the range of the euvironmental testing. electrical parameters is considered
- to be within equipment capability.
l 15 Revision 1
O O NUREG 0588 CATEGORY II DUKE POWER COMPANY GUIDELINES POSITION 2.2.11 Dust environments should be Duke has implemented housekeeping pro-addressed when establishing quali- cedures to preclude adverse dust con-fication service conditions. ditions at McGuire. Therefore, dust environments are not required as a qualification parameter.
2.2.12 Cobalt-60 is an acceptable gamma In general, Cobalt-60 sources are radiation source for environmental used to simulate the effects of gamma qualification. radiation for equipment qualified by test to operate in a LOCA/MSLB or 1 post-LOCA recirculation radiation environment.
I 2.3 Test Sequence 2.3.1 Justification of the adequacy of In general, when testing is used to the test sequence selected should qualify equipment required to perform be provided. a safety function in a LOCA, MSLB, or HELB environment, the following test sequence is employed:
- 1. The equipment is subjected to a calibration and/or veri-fication test at ambient con-ditions. This test included verification of safety related functions.
- 2. No specific abnormal tests are required since the accident environment envelopes the ab-normal condition with margin.
- 3. The equipment is irra-diated, using a Cobalt-60 source, to the estimated worst case gamma dose ob-tained from in-service oper-ation and required ac-cident and post accident performance.
- 4. The same equipment is test-ed to verify equipment cap-ability during a simulated seismic event.
O 16 Revision 1
NUREG 0588 CATEGORY II DUKE POWER COMPAh7 GUIDELINES POSITION 2.3.1 (Continued) (Continued)
- 5. The same equipment is test-ed under applicable simulated accident and post-accident conditions.
Completion of the above test sequence gives assurance that the equipment can perform safety-related functions under normal, abnormal and design basis event conditions. The design basis event testing applies extremes of radiation, vibration (seismic), temperature, humid-ity and chemical spray in a conservative sequence and verifies that the equipment being qualified is not marginal with respect to these parameters. The subject of margin and aging are dis-cussed under Items 3 and 4, respectively.
'N 2.3.2 The test should simulate as For equipment that is qualified by
) closely as practicable the post-ulated environment.
testing, the test environment sirulates as closely as practicable the posculated environment.
2.3.3 The test procedures should In general, the qualification testing conform to the guidelines des- of safety-related equipment at McGuire cribed in Section 5 of IEEE Std. conforms to the guidelines of IEEE 323-323-1971. 1971. The Duke position with respect to the documentation requirements of IEEE 323-1971 is provided in the response to Item 5.2.
2.3.4 The staff consideres that, for For equipment which is qualified by vital electrical equipment such testing and which is required to per-as penetrations, connectors, form a safety function in a LOCA, MSLB, cables, valves and motors, and or HELB environment, the test sequence transmitters located inside con- identified in the response to Item 2.3.1 tainment or exposed to hostile is generally employed and as a con-steam environments outside con- sequence does not, in general, employ tainment, separate effects test- s'eparate effects testing. Separate ing for the most part is not an effects testing, if used, is justified.
acceptable qualification method.
The testing of such equipment should be conducted in a manner that subjects the same piece of equipment to radiation and the
\
hostile steam environment sequentially.
17
NUREG 0588 CATEGORY II DUKE POWER COMPANY GUIDELINES POSITION 2.4 Other Qualification Methods Qualification by analysis or Duke does not necessarily rely on operating experience implemented, operating experience to establish as described in IEEE Std. 323-1971 the qualification of safety-related and other ancillary standards, may equipment, rather, operating experience be found acceptable. The adequacy may be included in support of quali-of these methods will be evaluated fication by test and/or analysis. The on the basis of the quality and equipment tables identify the qualifi-detail of the information submit- cation methodology employed for each ted in support of the assumptions item of safety-related equipment.
made and the specific function and location of the equipment. These methods are most suitable for equip-ment where testing is precluded by physical size of the equipment being qualified. It is required that, when these methods are employed, some partial type tests on vital compo-nents of the equipment be provided in support of these methods.
O v 3.0 MARGINS 3.1 Quantified margins should be For most plant specific applications applied to the design parameters margins are available between the qual-discussed in Section 1 to assure ification parameters and the plant that the postulated accident con- specific requirements.
ditions have been enveloped during testing. These margins should be Margins are as shown in the equipment applied in addition to any margins tables.
(conservatism) applied during the derivation of the specified plant parameters.
3.2 The margins provided in the design Same as 3.1 1 will be evaluated on a case-by-case basis. Factors that should be considered in quantifying margins are (a) the environmental stress levels induced during testing, (b) the duration of the stress, (c) the number of items tested and the number of tests performed in the hostile environment, (d) the per-formance characteristics of the p equipment while subjected to the g environmental stresses, and (e) the specified function of the equip-ment.
18 Revision 1
NUREG 0588 CATEGORY II DUKE POWER COMPANY GUIDELINES POSITION 3.3 When the qualification envelope in This generic envelope is not speci-Appendix C is used, the only fically employed by Westinghouse or required margins are those account- Duke for qualification testing. It ing for the inaccuracies in the should be noted that a given manu-test equipment. Sufficient con- facturer's test curve may approximate servatism has already been included this generic curve.
to account for uncertainties such as production errors and errors associated with defining satis-factory performance (e.g. , when only a small number of units are tested). -
3.4a Some equipment may be required by In general, equipment required to oper-the design to only perform its safety function within a short time ate in a harsh accident environment is qualified to perform its safety function l1 i
period into the event (i.e., within over a considerable period in excess of seconds or minutes), and, once its the calculated worst case time to perform function is complete, subsequent the safety functions as derived from the fai'.ures are shown not to be detri- accident analysis. The arbitrary ad-mental to plant safety. Other ditional one hour time requirement has
( equipment may not be required to not been applied to all equipment. The 4 . perform a safety function but must time margins indicated in the equipment not fail within a short time period tables are considered acceptable.
into the event, and subsequent '
failures are also shown not to be detrimental to plant safety.
Equipment in these categories is '
required to remain functional in the accident environment for a period of at least I hour in excess of the time assumed in the accident analysis.
l 3.4b For all other equipment (e.g., In qualifying equipment required to post-accident monitoring, recom- operate in a LOCA, MSLB, HELB, or biners, etc.), the 10 percent post-LOCA recirculation radiation 1 ;
time margin identified in Section environment, margin is included in i 6.3.1.5 of IEEE Std. 323-1974 may qualification testing by selecting i be used. conservative qualification parameters and/or test sequences. l1 Some of the areas where margin is usually implicit in a test sequence is as follows:
- 1. The full radiation dose, simulat-ing effects of in-service and acci-O dent radiation doses, is applied in a single step prior to seismic and 1
HELB test simulations.
1 19 Revision 1
O NUREG 0588 CATEGORY II DUKE POWER COMPANY GUIDELINES POSITION 3.4b (Continued) (Continued)
- 2. The seismic event simulation applies significant mechanical stress to the equipment prior to the HELB simulation.
- 3. The single envelope normally employed for HELB simulation, not only encompasses the effects of LOCA and MSLB accidents, but a whole spectrum of break sizes and locations within these accident definitions. As a consequence, the envelope employed invariably contains significant margin with respect to the transient for any single break size and location.
- 4. The single HELB simulation normally employed combines the high irradia-tion dose associated with the LOCA with the high temperature associated with the MSLB.
4.0 AGING 4.1 Qualification programs that are Safety-related valve operators (motor committed to conform to the and solenoid) located inside containment requirements of IEEE Std. 382-1972 and continuous duty motors located in-(for valve operators) and IEEE Std. side cont.ainment have been mechanically, 334-1971 (for motors) should con- thermally, and radiation aged to an sider the effects of aging. For equivalent of 40 years of service in this equipment, the Category I accordance with IEEE 382-1972 and IEEE positions of Section 4 are appli- 334-1971, respectively.
cable.
4.2 For other equipment, the qualifi- Addressment of aging was not a require-i cation programs should address ment in qualification programs for aging only to the extent that Category II equipment. However, with equipment that is composed, in the wealth of in-service experience part, of materials susceptible to covering a variety of equipment types, aging effects should be identified, no significant in-service aging mech-and a schedule for periodically anisms have been identified which could replacing the equipment and/or prejudice the qualification tests per-materials should be established. formed on new equipment within a few During individual case reviews, the years from start-up.
staff will require that the effects 20 1 - - .
O NUREG 0588 CATEGORY II DUKE POWER COMPANY GUIDELINES POSITION 4.2 (Continued) (Continued) of aging be accounted for on selec- Duke Power Company is evaluating the ted equipment if operating experi- in-containment Class IE equipment and ence or testing indicates that the will report at the time of discovery equipment may exhibit deleterious any equipment for which significant aging mechanisms. aging mechanisms are identified in-cluding the justification for continued use and/or reasonable alternative action. This on-going investigation will necessarily be very time consuming and will rely heavily on EPRI research, .
NRC studies, NPRDS information, IE Bulletins and Circulars, and industry research and testing.
5.0 QUALIFICATION DOCUMENTATION 5.1 The Staff endorses the require- Duke Power Company has arranged and j ments stated in IEEE Std. 323- win maintain in an auditable form s 1974 that, "The qualification sufficient qualification documen-documentation shall verify that tation that will support the quali-each type of electrical equip- fication that is required for each ment is qualified for its appli- type of safety-related electrical cation and meets its specified equipment.
performance requirements. The basis of qualification shall be explained to show the relation-ship of all facets of proof need-ed to support adequacy of the complete equipment."
" Data used to demonstrate the qualification of the equipment shall be pertinent to the ap-plication and organized in an auditable form."
' 5.2 The guidelines for documentation The qualification test reports in IEEE Std. 323-1971 are ac- referenced in the equipment tables ceptable. The documentation for equipment qualified to operate in should include sufficient infor- an accident environment, in general, mation to address the required meet the requirements of Section 5 information identified in Ap- to IEEE 323-1971 by providing certain
! pendix E. A certificate of con- essential information . For example:
formance by itself is not accept-able unless it is accompanied safety-related functional require-
[N--)/
by test data and information on ments to be demonstrated the qualification program.
21 Revision 1 1
NUREG 0588 CATEGORY II DUKE POWER COMPANY GUIDELINES POSITION 5.2 (Continued) (Continued) range of applicable environmental parameters to be considered identification of the test unit description of the test facility and monitoring instrumentation description of test unit mounting and interfaces summary of the test procedures I
summary of the test results 1
22 l
1
4 i
I 1
i l
I l
l i
1 I
i ,
4 1 k Attachment 6 ;
) !'
! Comparison of the Environmental qualification l
of Class lE Equipment Located Ir. side Containment to the '
J Duke Position on the Category iI Guidelines of NUREG 0588 e
I@
)
}
e 1
l t
i j
I J
l 4
i 3
t i
1 l.-._ . _ . - - - . . - - - -. _ _ _ _ _._. . _ _ _ _ _ . . . . - - -
eas > - e
- j ATTACHMENT 6 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED INSIDE CONTAINMENT TO THE DUKE POSITION ON THE CATEGORY II GUIDELINES OF NUREG 0588 Pm Rev. % Rev. Page Rev.
1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 10 0 i
11 0 .
- O
h I
i
!O EL40101T/194 - 4/13/82
Page 1 Rev. O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED INSIDE CONTAINMENT TO THE DUKE POSITION OF THE 1 CATEGORY II GUIDELINES OF NUREG 0588 Transmitters !
EQUIPMENT Transmitters Transmitters Flow (Barton 764 IDENTIFICATION (Barton lot 2) (BartonLotFi & Veritrak 590P)
NUREG 0588 l Item 2.1.1 a C (2) N/A 2.1.1 b N/A (2) C 2.1.2 C (2) N/A 2.1.3 C (2) N/A 2.1.3 a C (2) N/A 2.1.3 b C (2) N/A 2.1.3 c N/A (2) C 2.1.4 N/A (2) N/A 2.2.1 C (2) N/A 2.2.2 C (2) N/A 2.2.3 C (2) N/A 2.2.4 C (2) N/A 2.2.5 C (2) N/A 2.2.6 C (2) N/A 2.2.7 C (2) N/A O 2.2.8 C (2) N/A V 2.2.9 C (2) N/A 2.2.10 C (2) N/A 2.2.11 C (2) C 2.2.12 C (2) N/A 2.3.1 C (2) N/A 2.3.2 C (2) N/A 2.3.3 C (2) N/A 2.3.4 C (2) N/A 2.4 C (2) N/A 3.1 C (2) N/A 3.2 C (2) N/A 3.3 C (2) N/A 3.4 a (1) (2) N/A 3.4 b C (2) N/A 4.1 N/A (2) N/A 4.2 C (2) N/A 5.1 C (2) C 5.2 C (2) N/A l
l O
EL40101T/195 - 4/13/82
Page 2 Rev. O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED INSIDE CONTAINMENT TO THE DUKE POSITION OF THE CATEGORY II GUIDELINES OF NUREG 0588 EQUIPMENT RTDs IDENTIFICATION (Rosemount)
NUREG 0588 Item 2.1.1 a C 2.1.1 b N/A 2.1.2 (3) 2.1.3 C i 2.1.3 a C 2.1.3 b C 2.1.3 c N/A 2.1. 4 N/A 2.2.1 C 2.2.2 C 2.2.3 C 2.2.4 C 2.2.5 C 2.2.6 C 2.2.7 C O 2.2.8 2.2.9 2.2.10 C
C C
2.2.11 C 1 2.2.12 C 2.3.1 C 2.3.2 C 2.3.3 C
- 2.3.4 C 2.4 C 3.1 C 3.2 C 3.3 C 3.4 a C 3.4 b C 4.1 N/A 4.2 C 5.1 C 5.2 C lO EL40101T/196 - 4/13/82
l l
Page 3 .
Rev. O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED INSIDE CONTAINMENT TO THE DUKE POSITION OF THE CATEGORY II GUIDELINES OF NUREG 0588 Neutron Cont. Air Return EQUIPMENT Detectors H2 Recombiner (5) and H2 Skim IDENTIFICATION (WIGTD) (W Sturtevant A) Fan Motors NUREG 0588 Item 2.1.1 a N/A C C 2.1.1 b C N/A N/A 2.1.2 N/A C C 2.1.3 N/A C C 2.1.3 a N/A C C 2.1.3 b (4) C C 2.1.3 c N/A N/A N/A 2.1.4 N/A N/A N/A 2.2.1 N/A C C 2.2.2 N/A C C 2.2.3 N/A C C 2.2.4 N/A C C 2.2.5 C C C 2.2.6 N/A C C 2.2.7 N/A C C l i 2.2.8 N/A C C 2.2.9 N/A C C 2.2.10 N/A C C 2.2.11 C C C 2.2.12 N/A C C 2.3.1 N/A C (6) 2.3.2 N/A C C 2.3.3 N/A C C 2.3.4 N/A C (6) 2.4 N/A C C 3.1 N/A C C 3.2 N/A C C 3.3 N/A C C 3.4 a N/A N/A N/A 3.4 b N/A C C 4.1 N/A N/A C 4.2 N/A C N/A 5.1 C C C 5.2 N/A C C s
O EL40101T/197 - 4/13/82
Page 4 Rev. O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED INSIDE CONTAINMENT TO THE DUKE POSITION OF THE CATEGORY II GUIDELINES OF NUREG 0588 Valve Motor Operators EQUIPMENT (Limitorque IDENTIFICATION and Rotork)
NUREG 0588 Item 2.1.1 a C 2.1.1 5 N/A 2.1.2 C 2.1.3 C 2.1.3 a C -
2.1.3 b C 2.1.3 c C
. 2.1.4 N/A 2.2.1 C 2.2.2 C 2.2.3 C 2.2.4 C 2.2.5 C 2.2.6 C s 2.2.7 C 2.2.8 C 2.2.9 C 2.2.10 C i
2.2.11 C 2.2.12 C 2.3.1 C 2.3.2 C 2.3.3 C 2.3.4 C 2.4 C 3.1 C 3.2 C 3.3 C 3.4 a C 3.4 b C 4.1 C 4.2 N/A 5.1 C 5.2 C O
EL40101T/198 - 4/13/82 l . _ _ - - _ _
Page 5 Rev. O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED INSIDE CONTAINMENT TO THE DUKE POSITION OF THE CATEGORY II GUIDELINES OF NUREG 0588 Valve Solenoid Operators Damper Diff. Press Electrical EQUIPMENT (Valcor,Asco, Motors Switches Penetrations IDENTIFICATION Target Rock) (Rotork) (Solon) (D.G. O'Brien)
NUREG 0588 Item 2.1.1 a C C C C 2.1.1 b N/A N/A N/A N/A 2.1.2 C C C C 2.1. 3 C C C C 2.1.3 a C C C C 2.1.3 b C C C C 2.1.3 c C N/A N/A N/A 2.1.4 N/A N/A N/A N/A 2.2.1 C C C C 2.2.2 C C C C 2.2.3 C C C C
'2.2.4 C C C C 2.2.5 C C C C 2.2.6 C C C C L 2.2.7 C C C C 2.2.8 C C C C 2.2.9 C C C C 2.2.10 C C C N/A 2.2.11 C C C C 2.2.12 C C C C 2.3.1 C C C (7) 2.3.2 C C C C 2.3.3 C C C C
! 2.3.4 C C C (7) l 2.4 C C C C 3.1 C C C C 3.2 C C C C 3.3 C C C C 3.4 a C C C C 3.4 b C C N/A C 4.1 C C N/A N/A 4.2 N/A N/A C C 5.1 C C C C 5.2 C C C C l
O l
EL40101T/199 - 4/13/82
Page 6 Rev. O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED INSIDE CONTAINMENT TO THE DUKE POSITION OF THE CATEGORY II GUIDELINES OF NUREG 0588 Cable Term / Stem-Mounted EQUIPMENT Cables Splice Material Limit Switches Seal Material IDENTIFICATION (All Suppliers) (Raychem) (Namco) (3M)
NUREG 0588 Item 2.1.1 a C C C C 2.1.1 b C N/A N/A N/A 2.1.2 C C C C 2.1.3 C C C C 2.1.3 a C C C C 2.1.3 b C C C C 2.1.3 c N/A N/A C N/A 2.1. 4 N/A N/A N/A N/A 2.2.1 C C C C 2.2.2 C C C C 2.2.3 C C C C 2.2.4 C C C C 2.2.5 C C C C O 2.2.6 2.2.7 2.2.8 C
C C
C C
C C
C C
C C
C 2.2.9 C C C C 2.2.10 N/A N/A C N/A 2.2.11 C C C C 2.2.12 C C C C 2.3.1 C C C C 2.3.2 C C C C 2.3.3 C C C C 2.3.4 C C C C 2.4 C C N/A C 3.1 C C C C 3.2 C C C C 3.3 C C C C 3.4 a C C C C
. 3.4 b C C C C 4.1 N/A N/A N/A N/A 4.2 C C C C 5.1 C C C C 5.2 C C C C O ,
EL4010lT/200 - 4/13/82 ,
'l
- - - - - - - - , , _ . , , - _ ~ . - - - . - - . , _
_-_w..---
Page 7 McGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED INSIDE CONTAINMENT TO THE DUKE POSITION OF THE CATEGORY II GUIDELINES OF NUREG 0588 EQUIPMENT Cont'mt Rad Mon Cont'at Rad Mon Acoustical Valve IDENTIFICATION (High Range) Cable Position Monitor NUREG 0588 Item 2.1.1 a N/A (8) C 2.1.1 b C (8) C 2.1.2 C (8) C 2.1.3 C (8) C 2.1.3 a C (8) C 2.1.3 b N/A (8) N/A 2.1.3 c C (8) N/A 2.1.4 C (8) C 2.2.1 C (8) C 2.2.2 C (8) C 2.2.3 C (8) C 2.2.4 C (8) C 2.2.5 C (8) C 2.2.6 C (8) C 2.2.7 C (8) C O 2.2.8 2.2.9 2.2.10 C
C (8)
(8)
C C
C (8) C 2.2.11 C (8) C 2.2.12 C (8) C 2.3.1 C (8) C 2.3.2 C (8) C 2.3.3 C (8) C 2.3.4 C (8) C 2.4 N/A (8) N/A 3.1 C (8) C 3.2 C (8) C 3.3 N/A (8) C 3.4 a N/A (8) C 3.4 b C (8) N/A 4.1 N/A (8) N/A 4.2 C (8) C 5.1 C (8) C 5.2 C (8) C O
EL40101T/201 - 4/13/82
Page 8 McGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED INSIDE CONTAINMENT TO THE DUKE POSITION OF THE CATEGORY II GUIDELINES OF NUREG 0588 EQUIPMENT Reactor Vessel IDENTIFICATION Level Inst. Sys NUREG 0588 Item 2.1.1 a (8) 2.1.1 b (8) 2.1.2 (8) 2.1.3 (8) 2.1.3 a (8) 2.1.3 b (8)
- 2.1.3 c (8) 2.1.4 (8) 2.2.1 (8) 2.2.2 (8) 2.2.3 (8) 2.2.4 (8) 2.2.5 (8) 2.2.6 (8) 2.2.7 (8)
O 2.2.8 2.2.9 (8)
(8) 2.2.10 (8) 2.2.11 (8) 2.2.12 (8) 2.3.1 (8) 2.3.2 (8) 2.3.3 (8) 2.3.4 (8) 2.4 (8) 3.1 (8) 3.2 (8) 3.3 (8) 3.4 a (8) 3.4 b (8) 4.1 (8) 4.2 (8) 5.1 (8) 5.2 (8)
O EL40101T/202 - 4/13/82
Page 9 MCGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL QUALFICATION OF CLASS 1E EQUIPMENT LOCATED INSIDE CONTAINMENT TO THE OUKE POSITION ON THE CATEGORY II GUIDELINES OF NUREG 0588 Note 1 Certain Barton transmitters are claimed for short-term functions, that is until the containment pressure reaches the point at which safety injection is initiated by high containment pressure. A conservative estimate indicated that these transmitters are required to perform their short term functions until a containment pressure change of 8 psig has occurred. This pressure corresponds to a maximum containment temperture of 280 F and would occur no later than 3 minutes following the initiation of the break inside containment. Thus, Westinghouse specifies a trip accuracy of 110% for up to 5 minutes as a conservative qualfication requirement. The Westinghouse qualification program did not demonstrate in all cases an additional 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> while maintaining the specified trip accuracy.
The 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> margin requirement has been introduced by the Staff due to concerns over the consequences of transmitter failures after a few minutes into the accident scenario. In particular, that such failures could lead to negation of the safety function of generate information that could mislead the operator. These concerns are not valid in this case due to the
( manner in which these transmitters are employed and qualified:
Trip Function The qualification tests demonstrate that the trip accuracy requirement is maintained for up to 5 minutes and that the requisite trip signal will be generated. Once the signal is generated the signal is " locked-in" by the protection system and will not reset should the transmitter fail to continue to generate the trip signal at some time after 5 minutes. Thus,
! all automatic protective actions will proceed irrespective of the performance of the transmitter after 5 minutes.
Information to Operator The transmitter qualification verifies that equipment failures do not occur in a period up to 1 hour1.157407e-5 days <br />2.777778e-4 hours <br />1.653439e-6 weeks <br />3.805e-7 months <br /> and 5 minutes after initiation of the accident.
In fact, the qualification verifies that the transmitters will continue to operate for at least 4 months post-accident while maintaining the accuracy requirement specified for post-accident monitoring instrumentation.
Note 2 l This equipment is located in Unit 2 which is scheduled for operation in 1983. Qualification information will be provided in a future revision to this submittal following review by Duke Power Company.
O l
EL40101T/203 - 4/13/82
)
i Page 10 l Rev. 0 O Note 3 The only difference between the RTD models supplied by Rosemount is in the :
length of the stainless steel element housings; therefore, the environmental results reported in WCAP-9157 for Rosemount 176KF are equally applicable to the Rosemount 176KS.
Note 4 The power range neutron detectors are not required to perform any safety functions in an adverse accident environment. However, Westinghouse investigations into potential system interaction scenarios resulting from adverse accident environments identified a possible scenario in which an adverse accident environment resulting from an intermediate steamline break inside the containment could cause a malfunction of the power range neutron detectors. This interaction scenario is one of four which were the subject of IE Information Notice 79-22.
Duke Power Company has analyzed the effects of an adverse accident environment on the power range detectors and has concluded that there are no credible failures of these detectors that could result in unsafe plant conditions.
Note 5 The referenced topical reports, WCAP-7709L (Proprietary) through Supplement O. 4, and WCAP-7820 (Non-Proprietory) through Supplement 4 which summarize the Westinghouse qualification tests on the Model A Hydrogen Recombiner to IEEE 323-1971, have been reviewed and approved by the NRC as indicated in a letter frcm D. B. Vassallo to C. E. Eicheldinger dated May 1, 1975. This evaluation indicates that that Staff will not require any further review of these documents except to verify the plant specific applicability of the qualification parameters.
Note 6 NRC letter dated March 7, 1980 requested Duke to provide justification for the acceptability of separate effects testing for the containment air return and hydrogen skimmer fan motors. Specifically, the NRC Staff's concern was that although the motor insulation system and other motor l components are qualified for a radiation environment in excess of the calculated normal plus accident radiation environment, the Motorette testin did not include exposure to a steam environment following exposure to rad ation.
Duke Power Company has reviewed the design and testing of these fan
! motors. We have determined that the combined effects of a radiation l environment and a steam environment were previously included in the qualification testing on a complete motor assembly. The motor assembly tested was a valve motor operator composed of materials identified in Reliance Electric Company Report NUC-9 which are similar to the materials composing the McGuire containment air return and hydrogen skimmer fan O motors. This valve motor operator (ID No. 2Y267074A1EZ) was irradiated and examined as reported by Reliance in NUC-9 and then shipped to the EL40101T/204 - 4/13/82
Page 11 Rev. 0 V Limitorque Corporation where it was successfully tested in a steam environment in accordance with IEEE 382-1972 as reported in Limitorque Test Report 600456. The radiation and steam environmental parameters used in the Reliance and Limitorque tests envelope the accident conditions for the McGuire fan motors. Duke Power Company therefore concludes that in addition to the environmental testing described in Joy Manufacturing Company Test Report X-604, the environmental testing described above further assures the capability of the McGuire containment air return and hydrogen skimmer fan motors to function in the postulated McGuire accident environment.
Note 7 Separate effects radiation testing was performed on the McGuire electrical penetrations. The only effects of the irradiation were a slight increase in the hardness of the elastomeric grommets that provide the environmental seal in the plug and cable assemblies and a color change in the epoxy fiberglass insulators. These effects produced no measureable change in the electrical or mechanical performance of the penetration assemblies; therefore, separate effects testing for radiation is considered acceptable.
Note 8 The review of this equipment will be completed in a future revision of this submittal.
O O
EL40101T/205 - 4/13/82
. . . ~ . . . - . . . - . . . -_ _ ~ . . - . . _ . . - . . . . .. . . - ... _. - . .. -_ . . . - - . - .
'l i
I
!O 4
- l 1 ,
6 i
I i
=
! l i
Attachment 7 l Comparison of the Environmental qualification-l of Class IE Equipment Located in the Annulus to the i
Duke Position on the Category iI Guidelines of NUREG 0588 9 :
l b
t t
i
(
O '
1
! ATTACHMENT 7 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT
- LOCATED IN THE ANNULUS 3
TO THE DUKE POSITION ON THE CATEGORY II GUIDELINES OF NUREG 0588 Page Rev. Pag.e Rev. a Page Rev.
1 0 2 0 i
3 0 4 0 1
5 0 i
O I
I O
O .
EL40101T/207 - 4/13/82
~
Page 1 Rev. O McGUIRE NUCU!AR STATION - UNITS 1 AND 2 COMPARISON OF THE EN'IIRONMENTAL QUALIFICATION OF CLASS-1E EQUIPMENT LOCATED IN 'HE ANNULUS TO THE DUKE POSITION ON THE CATEGORY II GUIDELINES OF NUREG 0588 RC Wide Range EQUIPMENT Cent Sump RC Wide Range Pressure IDENTIFICATION . Level Xmitte (Barton) Pressure (Rosemount) (Barton Lot 2)
NUREG 0588 Item 2.1.1 a C C C 2.1.1 b N/A N/A N/A 2.1.2 C C. C 2.1.3 C C~ C 2.1.3 a C C C 2.1.3 b N/A N/A C 2.1.3 c N/A N/A' N/A 2.1.4 N/A C N/A 2.2.1 C C C 2.2.2 C C C 2.2.3 C C C -
2.2.4 N/A N/A N/A 2.2.5 N/A N/A N/A 2.2.6 N/A C C 2.2.7 C C C 2.2.8 N/A N/A N/A 2.2.9 C C C 2.2.10 C C C 2.2.11 C C C 2.2.12 C C C 2.3.1 N/A C C 2.3.2 C C C 2.3.3 C C C 2.3.4 N/A C C
- 2. 4 C C C 3.1 C C C 3.2 C -C C 3.3 N/A N/A N/A 3.4 a N/A . N/A C 3.4 b C C C 4.1 N/A N/A N/A 4.2 C C -C, 5.1 C C , C 5.2 -
C C C O i EL40101T/206 - 4/13/82
-- ~ - - -
l Page 2 McGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED IN THE ANNULUS TO THE DUKE POSITION ON THE CATEGORY II GUIDELINES OF NUREG 0588 EQUIPMENT Valve Solenoid Operators IDENTIFICATION (Valcor,ASCO)
NUREG 0588 Item 2.1.1 a C 2.1.1 b N/A 2.1.2 C 2.1. 3 C 2.1. 3 a C 2.1.3 b C 2.1.3 c C 2.1.4 N/A 2.2.1 C 2.2.2 C 2.2.3 C 2.2.4 N/A 2.2.5 N/A
- 2.2.6 C 2.2.7 C 2.2.8 N/A 2.2.9 C 2.2.10 C 2.2.11 C 2.2.12 C ,
2.3.1 N/A 2.3.2 C 2.3.3 C 2.3.4 N/A 2.4 C 3.1 C l 3.2 C l
3.3 N/A 3.4 a N/A 3.4 b C 4.1 N/A 4.2 C 5.1 C 5.2 C O
EL40101T/208 - 4/13/82 l - _ __ __ _ . . _ _ _ - -.
Page 3 McGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED IN THE ANNULUS TO THE DUXE POSITION ON THE CATEGORY II GUIDELINES OF NUREG 0588 EQUIPMENT Val /e Motor Operators Limit Switches Cables IDENTIFICATION (Rotork) (Namco) .,
(All Suppliers)
NUREG 0588 Item 2.1.1 a C C C 2.1.1 b N/A N/A N/A 2.1.2 C C C 2.1.3 C C C 2.1.3 a C C C 2.1.3 b C C C 2.1.3 c C C C 2.1.4 N/A N/A N/A 2.2.1 C C C 2.2.2 C C C 2.2.3 C C C 2.2.4 N/A N/A N/A 2.2.5 N/A N/A N/A 2.2.6 C C N/A 2.2.7 C C s O 2.2.8 2.2.9 2.2.10 N/A C
C N/A C
C N/n C
C 2.2.11 C C C 2.2.12 C C C 2.3.1 N/A N/A N/A 2.3.2 C C C 2.3.3 C C C 2.3.4 N/A N/A N/A 2.4 C C C 3.1 C C C 3.2 C C C 3.3 N/A N/A N/A 3.4 a N/A N/A N/A 3.4 b C C C 4.1 N/A N/A N/A 4.2 C C C 5.1 C C C 5.2 C' C C O
EL40101T/209 - 4/13/82
Page 4 4
McGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED IN THE ANNULUS TO THE DUKE POSITION ON THE CATEGORY II GUIDELINES OF NUREG 0588 EQUIPMENT RC Wide Range Limit Switches IDENTIFICATION Pressure (Barton Lot 5) (Microswitch)
NUREG 0588 Item 2.1.1 a (1) C 2.1.1 b (1) N/A 2.1.2 (1) C 2.1.3 (1) C 2.1.3 a (1) C 2.1.3 b (1) N/A 2.1.3 c (1) N/A 2.1.4 (1) C 2.2.1 (1) C 2.2.2 (1) C 2.2.3 (1) C 2.2.4 (1) N/A 2.2.5 (1) N/A 2.2.6 (1) N/A 2.2.7 (1) N/A i
O 2.2.8 2.2.9 2.2.10 (1)
(1)
N/A C
(1) C 2.2.11 (1) C 2.2.12 (1) C 2.3.1 (1) N/A 2.3.2 (1) C 2.3.3 (1) C 2.3.4 (1) N/A i
2.4 (1) C l 3.1 (1) C 3.2 (1) C 3.3 (1) N/A 3.4 a (1) N/A 3.4 b (1) C 4.1 (1) N/A 4.2 (1) C 5.1 (1) C 5.2 (1) C l
l O
EL40101T/210 - 4/13/82
__ _ - - _ _ _ _ = . _ - . _ _ _ _ _ _ - - - . -. - - _ . . . . . _ - _ _ _ . .
Page 5 i<
MCGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED IN THE ANNULUS TO THE DUKE POSITION ON
, CATEGORY II GUIDELINES OF NUREG 0588 J Note 1 1
This equipment is located in Unit 2 which is scheduled for operation in 1983. Qualification information will be provided in a future revision to i this submittal following review by Duke Power Company.
),
)
l r
l l
l O
EL40101T/211 - 4/13/82
t I
i i ,
, i i l 1
I i
4 i
1 Attachment 8 Comparison of the Environmental Qualification j of Class IE Equipment !,
Located OutsIJe Containment and Exposed to HELB Environment to the Duke Position on the Category iI Guidelines of NUREG 0588 l I I' i
i f
i i
I i
l 4
I k
4
} !
i @ !
1 1
2 .
I I I !
l ATTACHMENT 8 j COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO liELB ENVIRONMENT TO THE DUKE POSITION ON THE CATEGORY II GUIDELINES OF NUREG 0588 h Rev. & Rev. Page Rev.
1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 10 0 11 0 12 0 13 0 O
'l O
EL40101T/212 - 4/13/82 l.
Page 1 Rev. O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE HELB ENVIRONMENT TO THE DUKE POSITION ON THE CATEGORY II GUIDELINES OF NUREG 0588 EQUIPMENT Cont. Spray RHR Pump SI Pump Cent. Chg.
IDENTIFICATION Pump Motors Motors Motors Pump Motors NUREG 0588 Item 2.1.1 a N/A N/A C C 2.1.1 b C C N/A N/A 2.1.2 N/A N/A C C 2.1.3 N/A N/A C C 2.1.3 a N/A N/A C C 2.1.3 b N/A N/A N/A N/A 2.1.3 c C C . N/A N/A 2.1.4 C C C C 2.2.1 N/A N/A C C 2.2.2 C C C C 2.2.3 N/A N/A C C 2.2.4 N/A N/A N/A N/A 2.2.5 N/A N/A N/A N/A 2.2.6 N/A N/A C C 2.2.7 N/A N/A C C O 2.2.8 2.2.9 2.2.10 N/A N/A N/A N/A N/A N/A N/A C
C N/A C
C 2.2.11 C C C C 2.2.12 (1) (1) (1) (1) 2.3.1 N/A N/A C C 2.3.2 N/A N/A C C 2.3.3 N/A N/A C C 2.3.4 N/A N/A C C 2.4 N/A N/A C C 3.1 N/A N/A C C 3.2 N/A N/A C C 3.3 N/A N/A N/A N/A 3.4 a N/A N/A N/A N/A 3.4 b N/A N/A C C 4.1 N/A N/A N/A N/A 4.2 N/A N/A C C 5.1 C C C C 5.2 N/A N/A C C l
O EL40101T/213 - 4/13/82
Page 2 Rev. O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE HELB ENVIRONMENT TO THE DUKE POSITION ON THE CATEGORY II GUIDELINES OF NUREG 0588 EQUIPMENT NSW Pump GWO Sump Comp. Cool Bat Pump IDENTIFICATION Motors Pumo Motors Pump Motors Motors NUREG 0588 Item 2.1.1 a C N/A C N/A 2.1.1 b N/A C N/A C 2.1.2 C N/A C N/A 2.1.3 C N/A C N/A 2.1.3 a C N/A C N/A 2.1.3 b N/A N/A N/A N/A 2.1.3 c N/A C N/A C 2.1.4 C C C C 2.2.1 C N/A C N/A 2.2.2 C C C C 2.2.3 C N/A C N/A 2.2.4 N/A N/A N/A N/A 2.2.5 N/A N/A N/A N/A 2.2.6 C N/A C N/A l
2.2.7 C N/A C N/A 2.2.8 O' 2.2.9 N/A C
N/A N/A N/A C
N/A N/A 2.2.10 C N/A C N/A 2.2.11 C C C C 2.2.12 (1) (1) (1) (1) 2.3.1 C N/A C N/A 2.3.2 C N/A C N/A 2.3.3 C N/A C N/A 2.3.4 C N/A C N/A 2.4 C N/A C N/A 3.1 C N/A C N/A 3.2 C N/A C N/A 3.5 N/A N/A N/A N/A 3.4 a N/A N/A N/A N/A 3.4 b C N/A C N/A 4.1 N/A N/A N/A N/A 4.2 C N/A C N/A 5.1 C C C C 5.2 C N/A C N/A l
b l V EL40101T/214 - 4/13/82
Page 3 McGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE HELB ENVIRONMENT TO THE DUKE POSITION ON THE CATEGORY II GUIDELINE 5 OF NUREG 0588 EQUIPMENT BIR Pump IDENTIFICATION Motors NUREG 0588 Item 2.1.1 a N/A 2.1.1 b C 2.1.2 N/A 2.1.3 N/A 2.1.3 a N/A 2.1.3 b N/A 2.1.3 c C 2.1.4 C 2.2.1 N/A 2.2.2 C 2.2.3 N/A 2.2.4 N/A 2.2.5 N/A 2.2.6 N/A 2.2.7 N/A G 2.2.8 2.2.9 2.2.10 N/A N/A N/A 2.2.11 C 2.2.12 (1) 2.3.1 N/A 2.3.2 N/A 2.3.3 N/A 2.3.4 N/A 2.4 N/A 3.1 N/A 3.2 N/A 3.3 N/A 3.4 a N/A 3.4 b N/A 4.1 N/A 4.2 N/A 5.1 C 5.2 N/A O
EL40101T/215 - 4/13/82
s Page 4 Rev. O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE HELB ENVIRONMENT TO THE DUKE POSITION ON THE CATEGORY II GUIDELINES OF NUREG 0588 EQUIPMENT FP Cooling RHR and CS FP AHU Transzorb IDENTIFICATION Pumo Motors AHU Motors Motors Surge Suporessors NUREG 0588 Item 2.1.1 a C N/A C C 2.1.1 b N/A C N/A N/A 2.1.2 C N/A C C 2.1.3 C N/A C C 2.1.3 a C N/A C C 2.1.3 b N/A N/A N/A C 2.1.3 c N/A C N/A C 2.1.4 C C C N/A 2.2.1 C N/A C C 2.2.2 C C C C 2.2.3 C N/A C C 2.2.4 N/A N/A N/A N/A 2.2.5 N/A N/A N/A N/A 2.2.6 C N/A N/A N/A 2.2.7 C N/A N/A N/A G 2.2.8 2.2.9 2.2.10 N/A C
C N/A N/A N/A N/A N/A C
N/A N/A N/A 2.2.11 C C C C 2.2.12 (1) (1) (1) (1) 2.3.1 C N/A N/A N/A 2.3.2 C N/A N/A N/A 2.3.3 C N/A N/A C 2.3.4 C N/A N/A N/A
- 2. 4 C N/A C C 3.1 C N/A N/A C 3.2 C N/A N/A C 3.3 N/A N/A N/A N/A 3.4 a N/A N/A N/A C 3.4 b C N/A N/A C 4.1 N/A N/A N/A N/A 4.2 C N/A C C 5.1 C C C C 5.2 C N/A N/A N/A l
O EL40101T/216 - 4/13/82
Page 5 Rev. O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 !
COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE HELB ENVIRONMENT TO THE DUKE POSITION ON THE CATEGORY II GUIDELINES OF NUREG 0588 Buchanan, Bussman Fuseblocks EQUIPMENT States & Stanwick (2808,2809,3792, IDENTIFICATION Term Blocks 3839,4439,4575) C-H Relays (D23, 026)
NUREG 0588 Item 2.1.1 a C C C 2.1.1 b N/A N/A N/A 2.1.2 C C C 2.1.3 C C C 2.1.3 a C C C 2,1.3 b C C C 2.1.3 c C C C 2.1.4 N/A N/A N/A 2.2.1 C C C 2.2.2 C C C 2.2.3 C C C 2.2.4 N/A N/A N/A 2.2.5 N/A N/A N/A 2.2.6 C N/A C 2.2.7 C N/A C 1
2.2.8 N/A N/A N/A 2.2.9 C N/A C 2.2.10 C N/A C 2.2.11 C C C 2.2.12 (1) (1) (1) 2.3.1 N/A N/A C 2.3.2 N/A N/A C 2.3.3 C C C 2.3.4 C N/A C 2.4 C C C 3.1 C C C 3.2 C C C 3.3 C N/A C 3.4 a C C C 3.4 b C C C 4.1 N/A N/A N/A 4.2 C C C 5.1 C C C 5.2 C N/A C O
EL40101T/217 - 4/13/82
Page 6 Rev. O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE HELB ENVIRONMENT TO THE DUKE POSITION ON THE CATEGORY II GUIDELINES OF NUREG 0588 EQUIPMENT C-H SW & Ind. Lights E-Max AHU Diff IDENTIFICATION (E29, E30, 10250T) Analog OP Isol SD Relays Press Sw.
NUREG 0588 Item 2.1.1 a C C C N/A 2.1.1 b N/A N/A N/A C 2.1.2 C C C N/A 2.1.3 C C C N/A 2.1. 3 a C C C N/A 2.1.3 b C N/A N/A N/A 2.1.3 c C N/A N/A C 2.1.4 N/A N/A N/A C
- 2. 2.1 C C C N/A 2.2.2 C C C C 2.2.3 C C C N/A 2.2.4 N/A N/A N/A N/A 2.2.5 N/A N/A N/A N/A 2.2.6 C N/A C N/A 2.2.7 C N/A C N/A 2.2.8 N/A N/A N/A N/A O- 2.2.9 C N/A C N/A 2.2.10 C N/A C N/A 2.2.11 C C C C 2.2.12 (1) N/A N/A '1) 2.3.1 C N/A C N/A 2.3.2 C N/A C N/A 2.3.3 C C C N/A 2.3.4 C N/A C N/A 2.4 C C C N/A 3.1 C C C N/A 3.2 C C C N/A 3.3 C N/A C N/A 3.4 a C N/A C N/A 3.4 b C C C N/A 4.1 N/A N/A N/A N/A 4.2 C C C '1/A 5.1 C C C C 5.2 C N/A C N/A EL40101T/218 - 4/13/82
Page 7 Rev. O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED OUTSIDE CONTAIhMENT AND EXPOSED TO THE HELB ENVIRONMENT TO THE DUKE POSITION ON THE CATEGORY II GUIDELINES OF NUREG 0588 ABFXF-CP EQUIPMENT Firestat RIS 1A, 18, Lambda IDENTIFICATION Temp Sw Volt / Current Alarm 2A & 2B Power Supply NUREG 0588 Item 2.1.1 a N/A C N/A C 2.1.1 b C N/A C N/A 2.1.2 N/A C N/A C 2.1.3 N/A C N/A C 2.1.3 a N/A C N/A C 2.1.3 b N/A N/A N/A C 2.1.3 c C N/A C C 2.1.4 C N/A C N/A 2.2.1 N/A C N/A C 2.2.2 C C C C 2.2.3 N/A C N/A C 2.2.4 N/A N/A N/A N/A 2.2.5 N/A N/A N/A N/A 2.2.6 N/A N/A N/A N/A 2.2.7 N/A N/A N/A O' 2.2.8 2.2.9 N/A N/A N/A N/A N/A N/A N/A N/A N/A 2.2.10 N/A N/A N/A N/A
- 2.2.11 C C C C 2.2.12 (1) N/A (1) N/A 2.3.1 N/A N/A N/A N/A 2.3.2 N/A N/A N/A N/A 2.3.3 N/A C N/A C
! 2.3.4 N/A N/A N/A N/A l 2.4 N/A C N/A C 3.1 N/A C N/A C 3.2 N/A C N/A C 3.3 N/A N/A N/A N/A 3.4 a N/A N/A N/A C 3.4 b N/A C N/A C 4.1 N/A N/A N/A N/A 4.2 N/A C N/A C 5.1 C C C C 5.2 N/A N/A N/A N/A 1
i O
EL40101T/219 - 4/13/82
l l
Page 8 Rev. O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE HELB ENVIRONMENT TO THE DUKE POSITION ON THE CATEGORY II GUIDELINES OF NUREG 0588 EQUIPMENT ABFXF AV Filter Annulus Vent Annulus Vent IDENTIFICATION Motors Units Fan Motor Damper Motors NUREG 0588 Item 2.1.1 a N/A N/A N/A N/A 2.1.1 b c C C C 2.1.2 N/A N/A N/A N/A 2.1.3 N/A N/A N/A N/A 2.1.3 a N/A N/A N/A N/A 2.1.3 b N/A N/A N/A N/A 2.1.3 c C C C C 2.1.4 C C C C 2.2.1 N/A N/A N/A N/A 2.2.2 C C C C 2.2.3 N/A N/A N/A N/A 2.2.4 N/A N/A N/A N/A 2.2.5 N/A N/A N/A N/A 2.2.6 N/A N/A N/A N/A 2.2.7 N/A N/A N/A N/A 2.2.8 C\ 2.2.9 N/A N/A N/A N/A N/A N/A N/A N/A 2.2.10 N/A N/A N/A N/A 2.2.11 C C C C 2.2.12 (1) (1) (1) (1) 2.3.1 N/A N/A N/A N/A 2.3.2 N/A N/A N/A N/A 2.3.3 N/A N/A N/A N/A 2.3.4 N/A N/A N/A N/A 2.4 N/A N/A N/A N/A l
3.1 N/A N/A N/A N/A 3.2 N/A N/A N/A N/A 3.3 N/A N/A N/A N/A 3.4 a N/A N/A N/A N/A 3.4 b N/A N/A N/A N/A 4.1 N/A N/A N/A N/A 4.2 N/A N/A N/A N/A 5.1 C C C C 5.2 N/A N/A N/A N/A O
1 EL40101T/220 - 4/13/82
Page 9 Rev. O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE HELB ENVIRONMENT TO THE DUKE POSITION ON THE CATEGORY II GUIDELINES OF NUREG 0588 Valve Solenoid Valve Motor '
EQUIPMENT Starter /Contactor Operators Operators IDENTIFICATION W A201 J3CA (Valcor, ASCO) (Limitoroue, Rotork)
NUREG 0588 Item 2.1.1 a N/A C C 2.1.1 b C N/A N/A 2.1.2 N/A C C 2.1.3 N/A C C 2.1.3 a N/A C (2) 2.1.3 b N/A C C 2.1.3 c C C C 2.1.4 C N/A N/A 2.2.1 N/A C C 2.2.2 C C (2) 2.2.3 N/A C C 2.2.4 N/A N/A N/A 2.2.5 N/A N/A N/A 2.2.6 N/A C C A 2.2.7 N/A C (2)
() 2.2.8 N/A N/A N/A 2.2.9 N/A C C 2.2.10 N/A C C 2.2.11 C C C 2.2.12 (1) (1) (1) 2.3.1 N/A C C 2.3.2 N/A C C 2.3.3 N/A C C 2.3.4 N/A C C 2.4 N/A C N/A 3.1 N/A C C 3.2 N/A C C 3.3 N/A C C 3.4 a N/A C (2) 3.4 b N/A C (2) 4.1 N/A C C 4.2 N/A C C 5.1 C C C
- 5. 2 N/A C C O
EL40101T/221 - 4/13/82
Page 10 Rev. O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS lE EQUIPMENT LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE HELB ENVIRONMENT TO THE 00E POSITION ON THE CATEGORY II GUIDELINES OF NUREG 0588 EQUIPMENT Limit Switches Cables IDENTIFICATION (Namco) (All Suppliers)
NUREG 0588 Item 2.1.1 a C C 2.1.1 b N/A N/A 2.1.2 C C 2.1.3 C C 2.1.3 a C C 2.1.3 b C C 2.1.3 c C C 2.1. 4 N/A C 2.2.1 C N/A 2.2.2 C C 2.2.3 C C 2.2.4 N/A N/A 2.2.5 N/A N/A 2.2.6 C C 2.2.7 C C 2.2.8 N/A N/A 2.2.9 C C 2.2.10 C N/A 2.2.11 C C 2.2.12 (1) (1) 2.3.1 C C 2.3.2 C C 2.3.3 C C 2.3.4 C C 2.4 N/A N/A 3.1 C C 3.2 C C 3.3 C C 3.4 a C C 3.4 b C C 4.1 N/A C 4.2 C C 5.1 C C 5.2 C C O
EL4010lT/222 - 4/13/82
Page 11 McGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE HELB ENVIRONMENT TO THE DUKE POSITION ON THE CATEGORY II GUIDELINES OF NUREG 0588 EQUIPMENT Main Steam Feedwater Bussmann Fuses IDENTIFICATION Isolation Valves Isolation Valves (FNA, KTK)
NUREG 0588 Item 2.1.1 a C C C 2.1.1 b N/A N/A N/A 2.1.2 C C C ,
2.1.3 C C C 2.1.3 a C C C 2.1.3 b C C C 2.1.3 c N/A N/A C 2.1.4 C C N/A 2.2.1 C C C 2.2.2 C C C 4
2.2.3 C C C 2.2.4 N/A N/A N/A 2.2.5 , N/A N/A N/A 2.2.6 C C N/A 2.2.7 N/A N/A N/A O 2.2.8 2.2.9 2.2.10 N/A C
C N/A C
C N/A N/A N/A 2.2.11 C C C 2.2.12 (1) (1) (1) 2.3.1 C C N/A 2.3.2 C C N/A 2.3.3 C C C l
2.3.4 C C N/A 2.4 N/A C C 3.1 C C C 3.2 C C C 3.3 N/A N/A N/A 3.4 a C C C 3.4 b N/A N/A C 4.1 C (3) N/A 4.2 N/A N/A C 5.1 C C C 5.2 C C N/A O
l' EL40101T/223 - 4/13/82 1
Page 12 McGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS lE EQUIPMENT LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE HELB ENVIRONMENT TO THE DUKE POSITION ON THE CATEGORY II GUIDELINES OF NUREG 0588 I
EQUIPMENT Agastat Relay Ohmite Resistors RIS IDENTIFICATION (7000 Series) (Brown Devil & Dividohm) Signal Transmitter NUREG 0588 Item 2.1.1 a C C C 2.1.1 b N/A N/A N/A 2.1. 2 C C C 2.1. 3 C C C 2.1.3 a C C C 2.1.3 b C C C 2.1.3 c C C C 2.1.4 N/A N/A N/A 2.2.1 C C C 2.2.2 C C C 2.2.3 C C C 2.2.4 N/A N/A N/A 2.2.5 N/A N/A N/A 2.2.6 N/A N/A N/A 2.2.7 N/A N/A N/A O 2.2.8 2.2.9 2.2.10 N/A N/A N/A N/A N/A N/A N/A N/A N/A 2.2.11 C C C 2.2.12 N/A N/A N/A 2.3.1 N/A N/A N/A 2.3.2 N/A N/A N/A 2.3.3 C C C 2.3.4 N/A N/A N/A 2.4 C C C 3.1 C C C 3.2 C C C 3.3 N/A N/A N/A 3.4 a C C C 3.4 b C C C 4.1 N/A N/A N/A 4.2 C C C 5.1 C C C 5.2 N/A N/A N/A O
EL4010lT/224 - 4/13/82
Page 13 Rev. 0 MCGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE HELB ENVIRONMENT TO THE DUKE POSITION ON THE CATEGORY II GUIDELINES OF NUREG 0588 Note 1 The radiation qualification information required in response to NUREG 0588 and Item 2.1.6.b of NUREG 0578 is provided in Attachment 4 and Attachment 9.
Note 2 Rotork Test Report TR-3025 shows that when the qualfied temperature for these valves is exceeded, the torque switches may fail on the next operation of the valve. Since at least one additional operation is available after the valve's temperature qualification has been exceeded, the valve can be relied upon to move to its safety position.
N3 te 3 No specific aging test was performed on these operators. However, based on engineering
- evaluation of the components in these operators, there is reasonable assurance that aging is not a major factor based on similarity to other qualified valve operator materials.
O O
EL40101T/225 - 4/13/82 l
i 1
l i
i i
i 1
- i 4 i l
I !
t Attachment 9 1
{ Comparison of the Environmental qualification of Class IE Equipment f
, Located Outside Containment and Exposed to the l l Post-LOCA Recirculation Radiation Environment to the j j Duke Position on the Category 11 Guidelines of NUREG 0588 -
1 l
4 I
.i I
i l
i i
l i
f
-a . __ ____ _.A -- ---4--L a O
f ATTACHMENT 9 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO THE POST-LOCA RECIRCULATION RADIATION ENVIRONMENT TO THE DUKE POSITION ON THE CATEGORY II GUIDELINES OF NUREG 0588 Pg Rev. Pg Rev. P3 Rev.
1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 10 0 11 0 12 0 13 0 14 0 15 0
.O l
l L I
(
I T
O l t
I EL40101T/226 - 4/13/82 I
Page 1 Rev. O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO POST-LOCA l RECIRCULATION RADIATION ENVIRONMENT TO THE DUKE POSITION ON THE i CATEGORY II GUIDELINES OF NUREG 0588 EQUIPMENT Boric Acid Transfer Boron Inj. Recirc. Cent. Chg.
IDENTIFICATION Pump Motors Pump Motors Pumo Motors i t
NUREG 0588 Item 2.1.1 a N/A N/A C 2.1.1 b C C N/A 2.1.2 N/A N/A C !
2.1.3 N/A N/A C I 2.1.3 a N/A N/A C 2.1.3 b N/A N/A N/A 2.1.3 c C C N/A 2.1.4 C C C 2.2.1 N/A N/A C 2.2.2 C C C 2.2.3 N/A N/A C 2.2.4 N/A N/A N/A 2.2.5 N/A N/A N/A 2.2.6 N/A N/A N/A O-l 2.2.7 N/A N/A C U 2.2.8 N/A N/A N/A 2.2.9 N/A N/A C 2.2.10 N/A N/A C 2.2.11 C C C 2.2.12 N/A N/A C 2.3.1 N/A N/A C 2.3.2 N/A N/A C 2.3.3 N/A N/A C 2.3.4 N/A N/A N/A 2.4 N/A N/A C 3.1 N/A N/A C
- 3.2 N/A N/A C 3.3 N/A N/A N/A I 3.4 a N/A N/A N/A 3.4 b N/A N/A C 4.1 N/A N/A N/A 4.2 N/A N/A C 5.1 C C C 5.2 N/A N/A C O
EL40101T/227 - 4/13/82
Page 2 Rev. O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO POST-LOCA
- RECIRCULATION RADIATION ENVIRONMENT TO THE DUKE POSITION ON THE CATEGORY II GUIDELINES OF NUREG 0588 EQUIPMENT Cont. Spray IDENTIFICATION Pump Motors NUREG 0588 Item 2.1.1 a C 2.1.1 b N/A 2.1.2 C 2.1.3 C 2.1.3 a C i 2.1.3 b N/A -
2.1.3 c N/A 2.1. 4 C
! 2.2.1 C 2.2.2 C
- 2.2.3 C i
2.2.4 N/A 2.2.5 N/A i 2.2.6 N/A l 2.2.7 C 2.2.8 N/A 2.2.9 C 2.2.10 C 2.2.11 C 2.2.12 C 2.3.1 C 2.3.2 C 2.3.3 C 2.3.4 N/A 2.4 C i 3.1 C 3.2 C 3.3 N/A 3.4 a N/A 3.4 b C 4.1 N/A 4.2 C 5.1 C 5.2 C (O
1 EL40101T/228 - 4/13/82
Page 3 Rev. O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO POST-LOCA RECIRCULATION RADIATION ENVIRONMENT TO THE DUKE POSITION ON THE CATEGORY II GUIDELINES OF NUREG 0588 EQUIPMENT Fuel Pool Cooling RHR Pump RHR&CS Roome IDENTIFICATION Pump Motors Motors Sump Pump Motors NUREG 0588 Item 2.1.1 a C C C 2.1.1 b N/A N/A N/A 2.1.2 C C C 2.1.3 C C C 2.1.3 a C C C 2.1.3 b N/A N/A N/A 2.1.3 c N/A N/A N/A 2.1.4 C C C 2.2.1 C C C 2.2.2 C C C 2.2.3 C C C
- 2.2.4 N/A N/A N/A
- 2.2.5 N/A N/A N/A 2.2.6 N/A N/A N/A 2.2.7 C C C O- 2.2.8 2.2.9 N/A C
N/A C
N/A C
2.2.10 C C C 2.2.11 C C C 2.2.12 C C C 2.3.1 C C C 2.3.2 C C C 2.3.3 C C C 2.3.4 N/A N/A N/A 2.4 C C C 3.1 C C C 3.2 C C C 3.3 N/A N/A N/A 3.4 a N/A N/A N/A 3.4 b C C C '
4.1 N/A N/A N/A 4.2 C C C 5.1 C C C 5.2 C C C O
EL40101T/229 - 4/13/82
Page 4 Rev. O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO POST-LOCA RECIRCULATION RADIATION ENVIRONMENT TO THE DUKE POSITION ON THE CATEGORY II GUIDELINES OF NUREG 0588 EQUIPMENT SI Pump Annulus Vent Aux Bldg Filtered DG Vent IDENTIFICATION Motors Fan Motors Exh Fan Motors Fan Motors NUREG 0588 Item 2.1.1 a C C C C 2.1.1 b N/A N/A N/A N/A 2.1.2 C C C C 2.1.3 C C C C 2.1.3 a C C C C 2.1.3 b N/A N/A N/A N/A 2.1.3 c N/A N/A N/A N/A 2.1.4 C C C C 2.2.1 C C C C 2.2.2 C C C C 2.2.3 C C C C 2.2.4 N/A N/A N/A N/A 2.2.5 N/A N/A N/A N/A 2.2.6 N/A N/A N/A N/A
. 2. 2. 7 C C C C l
CN/ 2.2.8 2.2.9 N/A C
N/A C
N/A C
N/A C
l 2.2.10 C C C C 2.2.11 C C C C 2.2.12 C C C C 2.3.1 C C C C 2.3.2 C C C C 2.3.3 C C C C 2.3.4 N/A N/A N/A N/A 2.4 C C C C 3.1 C C C C 3.2 C C C C 3.3 N/A N/A N/A N/A 3.4 a N/A N/A N/A N/A 3.4 b c C C C 4.1 N/A N/A N/A N/A 4.2 C C C C 5.1 C C C C 5.2 C C C C 1
EL40101T/230 - 4/13/82
Page 5 Rev. O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRO IMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO POST-LOCA RECIRCULATION RADIATION ENVIFONMENT TO THE DUKE POSITION ON THE CATEGORY II GUICELINES OF NUREG 0588 EQUIPMENT FP Cooling Pump RHR Pump 600 Volt IDENTIFICATION AHU Motors AHU Motors Load Centers NUREG 0588 Item 2.1.1 a C C C 2.1.1 b N/A N/A N/A 2.1.2 C C C 2.1.3 C C C 2.1.3 a C C C 2.1.3 b N/A N/A N/A 2.1.3 c N/A N/A N/A 2.1.4 C C N/A 2.2.1 C C C 2.2.2 C C C 2.2.3 C C C i
2.2.4 N/A N/A N/A 2.2,5 N/A N/A N/A 2.2.6 N/A N/A N/A N 2.2.7 C C C 2.2.8 N/A N/A N/A 2.2.9 C C C 2.2.10 C C C 2.2.11 C C C 2.2.12 C C C 2.3.1 C C N/A 2.3.2 C C C 2.3.3 C C C 2.3.4 N/A N/A N/A 2.4 C C C 3.1 C C C 3.2 C C C 3.3 N/A N/A N/A l 3.4 a N/A N/A N/A i 3.4 b C C C
! 4.1 N/A N/A N/A l 4.2 C C C l 5.1 C C C 5.2 C C C l
lO EL40101T/231 - 4/13/82
Page 6 Rev. O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO POST-LOCA RECIRCULATION RADIATION ENVIRONMENT TO THE DUKE POSITION ON THE CATEGORY II GUIDELINES OF NUREG 0588 EQUIPMENT 600 Volt Diesel Diesel RCP SWGR IDENTIFICATION Motor Control Ctts Battery Battery Char Pot. Transformer NUREG 0588 Item 2.1.1 a C (1) (1) C 2.1.1 b N/A (1) (1) N/A 2.1.2 C (1) (1) C 2.1.3 C (1) (1) C 2.1.3 a C (1) (1) C 2.1.3 b N/A (1) (1) N/A 2.1.3 c N/A (1) (1) N/A 2.1.4 N/A (1) (1) N/A 2.2.1 C (1) (1) C 2.2.2 C (1) (1) C 2.2.3 C (1) (1) C 2.2.4 N/A (1) (1) N/A 2.2.5 N/A (1) (1) N/A 2.2.6 N/A (1) (1) N/A O 2.2.7 C (1) (1) C 2.2.8 N/A (1) (1) N/A 2.2.9 C (1) (1) C 2.2.10 C (1) (1) C 2.2.11 C (1) (1) C 2.2.12 C (1) (1) C 2.3.1 N/A (1) (1) N/A 2.3.2 C (1) (1) C 2.3.3 C (1) (1) C 2.3.4 N/A (1) (1) N/A 2.4 C (1) (1) C 3.1 C (1) (1) C 3.2 C (1) (1) C 3.3 N/A (1) (1) N/A 3.4 a N/A (1) (1) N/A 3.4 b C (1) (1) C 4.1 N/A (1) (1) N/A 4.2 C (1) (1) C 5.1 C (1) (1) C 5.2 C (1) (1) C l
l O
EL40101T/232 - 4/13/82
7 , ,
g , '% 4 Page 7 Rev. O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS ,
1E EQUIPMENT LOCATED OUTSIDE CONTAINMENT AND EXPOSED"T0 POST-LOCA RECIRCULATION RADIATION ENVIRONMENT TO THE OUKE POSITION ON THE CATEGORY II GUIDELINES OF NUREG 0588 Valve Solenoid EQUIPMENT Valve Motor Operators Operators -Limit Switches IDENTIFICATION (Limitorque,Rotork) (Valcor, ASCO) - (Namco)
NUREG 0588 Item 2.1.1 a C C C -
2.1.1 b N/A N/A N/A 2.1.2 C C C 2.1.3 C C C 2.1.3 a C C C 2.1.3 b C C C 2.1.3 c C C C 2.1. 4 N/A N/A N/A 2.2.1 C C C 2.2.2 C C C 2.2.3 C C C 2.2.4 N/A N/A N/A 2.2.5 N/A N/A N/A O. 2.2.6 N/A N/A N/A V 2.2.7 2.2.8 C
N/A C
N/A C
N/A 2.2.9 C C C 2.2.10 C C C 2.2.11 C C C 2.2.12 C C C 2.3.1 N/A N/A N/A 2.3.2 C C C 2.3.3 C C C 2.3.4 N/A N/A N/A 2.4 N/A N/A N/A 3.1 C C C 3.2 C C C 3.3 N/A N/A N/A 3.4 a N/A N/A N/A 3.4 b c C C 4.1 0 C C 4.2 4/A N/A N/A 5.1 C C C 5.2 / C C O
EL40101T/233 - 4/13/82
Page 8 Rev. O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL (UALIFICATION OF CLASS 1E EQUIPMENT LOCATEC OUTSIDE CONTAINMENT AND EXPOSED TO POST-LOCA RECIRCULATION RADIATION ENVIRONMENT TO THE DUKE POSITION ON THE CATEGORY II GUIDELINES OF NUREG 0588 EQUIPMENT HVAC Damper HVAC 3-Way Prop Temp High Temp IDENTIFICATION Motors Solenoid Valve Controller Thermostat NUREG 0588 Item 2.1.1 a C (2) (2) (2) 2.1.1 b N/A (2) (2) (2) 2.1.2 C (2) (2) (2) 2.1.3 C (2) (2) (2) 2.1.3 a C (2) (2) (2) 2.1. 3 b N/A (2) (2) (2) 2.1.3 c N/A (2) (2) (2) 2.1.4 N/A (2) (2) (2) 2.2.1 C (2) (2) (2) 2.2.2 C (2) (2) (2) 2.2.3 C (2) (2) (2) 2.2.4 N/A (2) (2) (2) 2.2.5 N/A (2) (2) (2) 2.2.6 N/A (2) (2) (2)
- 2.2.7 C (2) (2) (2) l 2.2.8 N/A (2) (2) (2)
, 2.2.9 C (2) (2) (2) l 2.2.10 C (2) (2) (2) 2.2.11 C (2) (2) (2) 2.2.12 C (2) (2) (2) 2.3.1 N/A (2) (2) (2) 2.3.2 C (2) (2) (2) 2.3.3 C (2) (2) (2) 2.3.4 N/A (2) (2) (2) 2.4 C (2) (2) (2) 3.1 C (2) (2) (2) 3.2 C (2) (2) (2) 3.3 N/A (2) (2) (2) l 3.4 a N/A (2) (2) (2) 3.4 b C (2) (2) (2) 4.1 N/A (2) (2) (2) 4.2 C (2) (2) (2) 5.1 C (2) (2) (2) 5.2 C (2) (2) (2)
O EL40101T/234 - 4/13/82
Page 9 Rev. O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO POST-LOCA RECIRCULATION RADIATION ENVIRONMENT TO THE DUKE POSITION ON THE CATEGORY II GUIDELINES OF NUREG 0588 EQUIPMENT RTD Diff. Press. Limit Switch IDENTIFICATION (Weed) Switch (Micro Switch)
NUREG 0588 Item 2.1.1 a (2) (2) C 2.1.1 b (2) (2) N/A 2.1.2 (2) (2) C 2.1.3 (2) (2) C 2.1.3 a (2) (2) C 2.1.3 b (2) (2) N/A 2.1.3 : (2) (2) N/A 2.1.4 (2) (2) N/A 2.2.1 (2) (2) C 2.2.2 (2) (2) C 2.2.3 (2) (2) C 2.2.4 (2) (2) N/A 2.2.5 (2) (2) N/A 2.2.6 (2) (2) N/A
, 2.2.7 (2) (2) C i 2.2.8 (2) (2) N/A 2.2.9 (2) (2) C 2.2.10 (2) (2) C 2.2.11 (2) (2) C 2.2.12 (2) (2) C 2.3.1 (2) (2) N/A 2.3.2 (2) (2) C 2.3.3 (2) (2) C 2.3.4 (2) (2) N/A
- 2. 4 (2) (2) C 3.1 (2) (2) C
- 3. 2 (2) (2) C 3.3 (2) (2) N/A 3.4 a (2) (2) N/A 3.4 b (2) (2) C 4.1 (2) (2) N/A 4.2 (2) (2) C 5.1 (2) (2) C 5.2 (2) (2) C l
l O
EL40101T/235 - 4/13/82
Page 10 Rev. O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO POST-LOCA RECIRCULATION RADIATION ENVIRONMENT TO THE OUKE POSITION ON THE CATEGORY II GUIDELINES OF NUREG 0588 EQUIPMENT Cables Bussmann Fuse Bussmann Fuse Blocks IDENTIFICATION (All Suppliers) (FNA) (2808,3792,4439&4575)
NUREG 0586 Item 2.1.1 a C C C 2.1.1 b N/A N/A N/A 2.1.2 C C C 2.1.3 C C C 2.1.3 a C C C 2.1.3 b C C C 2.1.3 c C C C 2.1.4 N/A N/A N/A 2.2.1 C C C 2.2.2 C C C 2.2.3 C C C 2.2.4 N/A N/A N/A 2.2.5 N/A N/A N/A 2.2.6 N/A N/A N/A 2.2.7 C C N/A ON 2.2.8 N/A N/A N/A 2.2.9 C C N/A 2.2.10 C C N/A 2.2.11 C C C 2.2.12 C C N/A 2.3.1 N/A C N/A 2.3.2 C C N/A 2.3.3 C C C 2.3.4 N/A N/A N/A 2.4 C C C 3.1 C C C 3.2 C C C 3.3 N/A N/A N/A 3.4 a N/A C C 3.4 b C C C 4.1 N/A N/A N/A 4.2 C C C 5.1 C C C 5.2 C C N/A l0 EL40101T/236 - 4/13/82
Page 11 Rev. O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO POST-LOCA RECIRCULATION RADIATION ENVIRONMENT TO THE DUKE POSITION ON THE CATEGORY II GUIDELINES OF NUREG 0588 EQUIPMENT C-H Ind. Light IDENTIFICATION (E29)
NUREG 0588 Item 2.1.1 a C 2.1.1 b N/A 2.1.2 C 2.1.3 C 2.1.3 a C 2.1.3 b C 2.1.3 c C 2.1.4 N/A 2.2.1 C 2.2.2 C 2.2.3 C 2.2.4 N/A 2.2.5 N/A 2.2.6 N/A 2.2.7 C s 2.2.8 N/A l 2.2.9 C 2.2.10 C 2.2.11 C l 2.2.12 C 2.3.1 C 2.3.2 C 2.3.3 C 2.3.4 N/A 2.4 C 3.1 C 3.2 C 3.3 N/A 3.4 a C 3.4 b C 4.1 N/A 4.2 C 5.1 C 5.2 C -
O EL40101T/237 - 4/13/82
Page 12 McGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO POST-LOCA RECIRCULATION RADIATION ENVIRONMENT TO THE DUKE POSITION ON THE CATEGORY II GUIDELINES OF NUREG 0588 EQUIPMENT C-H Relays (3) G.S. Surge Suppressor C-H Selector Switch IDENTIFICATION (D23,026) (Transzorb) (10250T)
- NUREG 0588 Item 2.1.1 a C C C 2.1.1 b N/A N/A N/A 2.1.2 C C C 2.1.3 C C C 2.1.3 a C C C 2.1.3 b C C C 2.1.3 c C C C 2.1.4 N/A N/A N/A 2.2.1 C C C 2.2.2 C C C 2.2.3 C C C 2.2.4 N/A N/A N/A 2.2.5 N/A N/A N/A l 2.2.6 N/A N/A N/A
( 2.2.7 C N/A C
' 2.2.8 N/A N/A N/A l
i 2.2.9 C N/A C l 2.2.10 C N/A C 2.2.11 C C C 2.2.12 C N/A C 2.3.1 C N/A C 2.3.2 C N/A C 2.3.3 C C C 2.3.4 N/A N/A N/A 2.4 C C C 3.1 C C C 3.2 C C C 3.3 N/A N/A N/A 3.4 a C C C 3.4 b C C C 4.1 N/A N/A N/A 4.2 C C C 5.1 C C - C 5.2 C N/A C l
O EL40101T/238 - 4/13/82
l Page 13 McGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO POST-LOCA RECIRCULATION RADIATION ENVIRONMENT TO THE DUKE POSITION ON THE CATEGORY II GUIDELINES OF NUREG 0588 EQUIPMENT States ZWM C-H Switch IDENTIFICATION Tem Block Indicating Lights (E30)
NUREG 0588 Item 2.1.1 a C C 2.1.1 b N/A N/A 2.1.2 C C 2.1.3 C C 2.1.3 a C C 2.1.3 b C C 2.1.3 c C C 2.1.4 N/A N/A 2.2.1 C C 2.2.2 C C 2.2.3 C C 2.2.4 N/A N/A 2.2.5 N/A N/A 2.2.6 N/A N/A' O 2.2.7 2.2.8 2.2.9 N/A N/A N/A C
N/A C
2.2.10 N/A C 2.2.11 C C 2.2.12 N/A C 2.3.1 N/A C 2.3.2 N/A C 2.3.3 C C 2.3.4 N/A N/A 2.4 C C 3.1 C C 3.2 C C 3.3 N/A N/A 3.4 a C C 3.4 b C C 4.1 N/A N/A 4.2 C C 5.1 C C 5.2 N/A C O
EL40101T/239 - 4/13/82
Page 14 Rev. O McGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL QUALIFICATION OF CLASS 1E EQUIPMENT LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO POST-LOCA RECIRCULATION RADIATION ENVIRONMENT TO THE DUKE POSITION ON THE l CATEGORY II GUIDELINES OF NUREG 0588 EQUIPMENT Stanwick Litte1 fuse IDENTIFICATION Term Block Fuse (Slo-Blo)
NUREG 0588 Item 2.1.1 a (4) (4) 2.1.1 b (4) (4) 2.1.2 (4) (4) 2.1.3 (4) (4) 2.1.3 a (4) (4) 2.1.3 b (4) (4) 2.1.3 c (4) (/)
2.1.4 (4) (4) 2.2.1 (4) (4) 2.2.2 (4) (4) 2.2.3 (4) (4) 2.2.4 (4) (4) 2.2.5 (4) (4) 2.2.6 (4) (4) 2.2.7 (4) (4)
/]
' 2.2.8 (4) (4) 2.2.9 (4) (4) 2.2.10 (4) (4) 2.2.11 (4) (4) 2.2.12 (4) (4) 2.3.1 (4) (4) 2.3.2 (4) (4) 2.3.3 (4) (4) 2.3.4 (4) (4) 2.4 (4) (4) 3.1 (4) (4) 3.2 (4) (4) 3.3 (4) (4) 3.4 a (4) (4) 3.4 b (4) (4) l 4.1 (e) (4) l 4.2 (4) (4) 5.1 (4) (4) 5.2 (4) (4) l lO EL40101T/240 - 4/13/82
Page 15 Rev. O MCGUIRE NUCLEAR STATION - UNITS 1 AND 2 COMPARISON OF THE ENVIRONMENTAL QUALFICATION OF CLASS 1E EQUIPMENT LOCATED OUTSIDE CONTAINMENT AND EXPOSED TO POST-LOCA RECIRCULATION RADIATION ENVIRONMENT TO THE DUKE POSITION ON THE CATEGORY II GUIDELINES OF NUREG 0588 Note 1 Radiation testing of this equipment is not reqa: red for levels below 1x104 PAD per Section 8.1 of IEEE 535-1979.
Note 2 A qualification program is currently in progress for these components. The results of this program will be reported upon completion.
Note 3 This comparison does not cover Cutler-Hammer D26 relays located in Unit 2.
The comparison will be performad as a part of the Unit 2 qualification program.
Note 4 i These components are used in Class IE circuitry and exposed to greater than 1x103 RAD in Unit 2 only. The radiation qualification of Unit 2 components is O in progress. The results of this qualification program will be provided upon completion by Juke Power Company.
I r
O EL40101T/241 - 4,33,g,