ML20036A024
| ML20036A024 | |
| Person / Time | |
|---|---|
| Site: | Framatome ANP Richland |
| Issue date: | 04/29/1993 |
| From: | Edgar J SIEMENS POWER CORP. (FORMERLY SIEMENS NUCLEAR POWER |
| To: | Adensam E NRC OFFICE OF NUCLEAR MATERIAL SAFETY & SAFEGUARDS (NMSS) |
| References | |
| NUDOCS 9305070234 | |
| Download: ML20036A024 (6) | |
Text
,
SIEMENS l
'^
April 29,1993 U. S. Nuclear Regulatory Commission Attn: Ms. Elinor G. Adensam, Acting Chief Licensing Branch
- Division of Fuel Cycle Safety and Safeguards, NMSS Washington, DC 20555 L
Ucense No. SNM-1227 Docket No. 70-1257
Dear Ms. Adensam:
Siemens Power Corporation (SPC) requests the following amendments to its license:
1.
A revision to the membership of the Health and Safety Council as described in Chapter 2. The.Richland Plant Manager replaces the Vice President, Operations Division as chairman and the staff of the Vice President, Operations Division is deleted from specific mention. Recent organizational changes have made the Richland Plant Manager _the logical chairman of the council and item 5 under membership includes anyone else who needs to be as member..
In addition the Vice President, Engineering Division is now the Vice President, Engineering, Nuclear Division so his title has been changed.
2.
A revision to the sixth paragraph under section 3.2.2, " Ventilation," such that when the alpha air monitoring system is having maintenance performed on it, manual operation is allowed. The switching of the HVAC system from recirculating to once-through is very hard, mechanically, on the HVAC.
equipment. If there is a high alpha trip, the switchover from recirculation to once-through air flow will happen automatically. If it is determined that the signal causing the trip is spurious, the system will be put in the manual mode during maintenance. While in the manual mode, both visual and audible alarms will indicate a trip and the switchover to once-through air flow will be made manually if the trip is not spurious.
Enclosed are six copies of revised pages 2-10 and 3-4 from the existing license and 2-13 and 3-4 from the renewal application.
If you need further information, please call me at 509-375-8663.
Siemens Power Corporation Nuclear Division - Engineenng and Manufaciunng FacMy l
I 2101 Horn Rands AnM PO Rnv MO - RicNand. WA 99352-0130 Tet (509) 375-8100 Fx (509) 375 8402 9305070234 930429 l
~PDR ADOCK 07001257 C-PDR
April 29,1993 Very truly yours,-
4
. Edgar ameSB Staff Engineer - Licensing JBE:pm
=
L 3
Siemens Power Corporation - Nuclear Division EMF-2
.SPECIAL NUCLEAR MATERIAL LICENSE NO. SNM-1227, NRC DOCKET NO. 70-1257 E
PART I-LICENSE CONDITIONS REv.
2.3 Safety Review Committees -
2.3.1 Health and Safety Council SPC has established the Health and Safety Council which convenes monthly at.
SPC's fuel manufacturing plant in Richland, Washington, to review various aspects of the safety program, including:
1.
Industrial safety practices and trends.
2.
Radiological safety practices and trends.
+
i 3.
Criticality safety practices and trends.
~j F
I 4.
Adequacy of emergency planning and procedures (including results of tests and drills).
5.
Overall safety awareness and attitude of employees and programs for promoting improvements.
6.
Unusual occurrences and accident investigations, including
.L recommendations to prevent recurrences.
[
i 7.
Status of Council related action items.
Membership of this Councilincludes:
(
1.
Richland Plant Manager (Chair).
2.
Supervisor, Safety (Secretary).
J 3.
Manager, Safety, Security, and Licensing (Co-Chais).
'h Vice President, Engineering, Nuclear Division.
]
4.
5.
Appropriate managers within these and other organizations.
f
[
i
.i
.i :
6..
Key safety engi.neers and specialists.
.[
j Designated members of the Council make monthly inspections of buildings and i
-i
. grounds for housekeeping.and safety practices, and report the findings to the Council at-
'h j
~5hNDMENT APPLOATON DATE:
PA E N a April 29,1993 2-10 l ].
D SPC.ND;3330.u47 (R+07/92) -
L I
i
l Siemens Power Corporation - Nuclear Division eur.2 SPECIAL NUCLEAR MATERIAL LICENSE NO. SNM-1227, NRC DOCKET NO. 70-1257 I
I I
PART I - LICENSE CONDITIONS nev.
2.3 Safety Review Committees i
f2.3.1 Health and Safety Council SPC has established the Health and Safety Council which convenes monthly at
- SPC's fuel manufacturing plant in Richland, Washington, to review various aspects of the
, safety program, including:
i 1.
Industrial safety practices and trends.
2.
Radiological safety practices and trends.
3.
Criticality safety practices and trends.
4.
Adequacy of emergency planning and procedures (including results of tests and drills).
5.
Overall safety awareness and attitude of employees and programs.for l
promoting improvements.
6.
Unusual occurrences and accident investigations, including' recommendations to prevent recurrences.
7.
Status of Council related action items.
Membership of this Councilincludes:
1.
Richland Plant Manager (Chair).
2.
Supervisor, Safety (Secretary).
3.
Manager, Safety, Security, and Ucensing (Co-Chair).
4.
Vice President, Engineering, Nuclear Division.
5.
Appropriate managers within these and other organizations.
6.
Key safety engineers and specialists.
Designated members of the Council make monthly inspections of buildings and' grounds for housekeeping and safety practices, and report the findings to the Council at -
l ANNDMENT APPUCAttON DAC April 29,1993 2-10 PA E N "
SPC NO 3330 947 !R *07 92; i
SiemenS Power Corporation - Nuclear Division EM F.2 SPECIAL NUCLEAR MATERIAL LICENSE NO. SNM-1227, NRC DOCKET NO. 70-_1257 PART I - LICENSE CONDITIONS
- nev.
2.3 Safety Review Committees 2.3.1 Health and Safety Council l
2 SPC has established the Health and Safety Council which convenes monthly at-SPC's fuel manufacturing plant in Richland, Washington, to review various aspects of the safety program, including:
1.
Industrial safety practices and trends.
2.
Radiological safety practices and trends.
3.
Criticality safety practices and trends.
4.
Adequacy of emergency planning and procedures (including results of 1
tests and drills).
5.
Overali safety awareness and attitude of employees and programs for promoting improvements.
6.
Unusual occurrences and accident investigations, including recornmendations to prevent recurrences.
7.
Status of Council related action items.
Membership of this Councilincludes:
1.
Richland Plant Manager (Chair).
2.
Supervisor, Safety (Secretary).
3.
Manager, Safety, Security, and Licensing (Co-Chair).
4.
Vice President, Engineering, Nuclear Division.
5.
Appropriate managers within these and other organizations.
6.
Key safety _ engineers and specialists.
I Designated members of the Council make monthly inspections of buildings and grounds for housekeeping and safety practices, and report the findings to the Council at AVEbbdEU APPLCAtiON DATE:
April 29,1993 2-10 PA E NO.:
SPc-tJD 3330 947 (R-t/07'92.
SiemenS Power Corporation - Nuclear Division eus.2 SPECIAL NUCLEAR MATERIAL LICENSE NO. SNM-1227, NRC DOCKET NO. 70-1257 PART I - LICENSE CONDITIONS REv.
i p _._ _ _ _. _ _..
2.3 Safety Review Committees I
2.3.1 Health and Safety Council l
SPC has established the Health and Safety Council which convenes monthly at SPC's fuel manufacturing plant in Richland, Washington, to review various aspects of the safety program, including:
1.
Industrial safety practices and trends.
l 2.
Radiological safety practices and trends.
3.
Criticality safety practices and trends.
4.
Adequacy of emergency planning and procedures (including results of tests and drills).
I 5.
Overall safety awareness and attitude of employees and programs for promoting improvements.
i 6.
Unusual occurrences and accident investigations, including recommendations to prevent recurrences.
l l
I 7.
Status of Council related action items.
Membership of this Councilincludes:
1.
Richland Plant Manage- (Chair).
2.
Supervisor, Safety (Secretary).
3.
Manager, Safety, Security, and Ucensing (Co-Chair).
4.
Vice President, Engineering, Nuclear Division.
5.
Appropriate managers within these and other organizations.
6.
Key safety engineers and specialists.
Designated members of the Council make monthly inspections of buildings and grounds for housekeeping and safety practices, and report the findings to the Council at invowm wucem onc April 29,1993 2-1 mma i
A.
sPC NO 3330.947 (R.vo7s?;
' Siemen~S Power Corporation - Nuclear Division
. su r.2 SPECIAL NUCLEAR MATERIAL LICENSE NO. SNM-1227, NRC DOCKET NO. 70-1257 PART I - LICENSE CONDITIONS REv.
I__..__._._.__
2.3 Safety Review Committees I
l 2.3.1 Health and Safety Council SPC has established the Health and Safety Council which convenes monthly at l SPC's fuel manufacturing plant in Richland, Washington, to review various aspects of the-l safety program, including:
4 i
1.
Industrial safety practices and trends.
2.
Radiological safety practices and trends.
3.
Criticality safety practices and trends.
I 4.
Adequacy of emergency planning and procedures (including results of tests and drills).
5.
Overall safety awareness and attitude of employees and programs for-promoting improvements.
I 6.
Unusual occurrences and accident investigations, including recommendations to prevent recurrences.
7.
Status of Council related action items.
Membership of this Councilincludes:
1.
Richland Plant Manager (Chair).
2.
Supervisor, Safety (Secretary).
3.
Manager, Safety, Security, and Licensing (Co-Chair).
1 4.
Vice President, Engineering, Nuclear Division.
5.
Appropriate managers within these and other organizations.
6.
Key safety engineers and specialists.
Designated members of the Council make monthly inspections of buildings and grounds for housekeeping and safety practices, and report the findings to the Council at hssF46a amcATmt, ATE April 29,1993 2-10 e
~ ~ ~ - -
SPC ND.3330 t,c R UO792,
.+
Siemen's Power Corporation - Nuclear Division EMF.2 SPECIAL NUCLEAR MATERIAL LICENSE NO. SNM-1227, NRC DOCKET NO. 70-1257 PART I - LICENSE CONDITIONS
- REV, j _... _ _. _ _.. _
2.3 Safety Review Committees j'
2.3.1 Health and Safety Council l
SPC has established the Health and Safety Council which convenes monthly at-SPC's fuel manufacturing plant in Richland, Washington, to review various aspects of the
- safety program, including
I 1.
Industrial safety practices and trends.
2.
Radiological safety practices and trends.
3.
Criticality safety practices and trends.
4.
Adequacy of emergency planning and procedures (including results of tests and drills).
5.
Overall safety awareness and attitude of employees and programs for promoting improvements.
6.
Unusual occurrences and accident investigations, including recommendations to prevent recurrences.
7.
Status of Council related action items.
Membership of this Councilincludes:
1.
Richland Plant Manager (Chair).
2.
Supervisor, Safety (Secretary).
3.
Manager, Safety, Security, and Ucensing (Co-Chair).
j 4.
Vice President. Engineering, Nuclear Division.
5.
Appropriate managers within these and other organizations.
6.
Key safety engineers and specialists.
Designated members of the Council make monthly inspections of buildings and grounds for housekeeping and safety practices, and report the findings to the Council at anNrmsT epucatocart:
April 29,1993 2-10 PA E NO.
$Pc ND.3330 947 f R-U07 92,