ML20005D819

From kanterella
Jump to navigation Jump to search
Proposed Tech Specs 4.0.2 Re Surveillance Completion Times
ML20005D819
Person / Time
Site: Waterford Entergy icon.png
Issue date: 12/19/1989
From:
LOUISIANA POWER & LIGHT CO.
To:
Shared Package
ML20005D818 List:
References
NUDOCS 9001020006
Download: ML20005D819 (7)
v • d • e


Text

. .

~

.. APPLICABILITY

'[--

4 SURVEILLANCE REQUIREMENTS 4.0.1 Surveillance Requirements shall be applicable during the OPERATIONAL MODES or other conditions specified for individual Limiting Conditions for .

Operation unless otherwise stated in an individual Surveillance Requirement.

4.0.2 Each Surveillance Requirement shall be performed within the specified time interval with:

l a. A maximum allowable extension not to exceed 25% of the surveillance L interval, and I

b. The combined time interval for any three consecutive surveillance intervals not to exceed 3.25 times the specified surveillance interval.

]

u ,

l 4.0.3 Failure to perform a Surveillance Requirement within the specified time ,

interval shall constitute a failure to meet the OPERABILITY requirements for a l Limiting Condition for Operation. Exceptions to these requirements are stated I

in the individual specifications. Surveillance Requirements do not have to be performed on inoperable equipment.

4.0.4 Entry into an OPERATIONAL MODE or other specified condition shall not be made unless the Surveillance Requirement (s) associated with the Limiting I i Condition for Operation have been performed within the stated surveillance l

-I- interval or as otherwise specified. l l

4.0.5 Surveillance Requirements for inservice inspection and testing of ASME '

Code Class 1, 2, and 3 components shall be applicable as follows: l i

< a. Inservice inspection of ASME Code Class 1, 2, and 3 components and inservice testing ASME Code Class 1, 2 and 3 pumps and valves shall be performed in accordance with Section XI of the ASME Boiler and Pressure Vessel Code and applicable Addenda as required by 10 CFR 50, Section 50.55a(g), except where specific written relief has been I granted by the Commission-pursuant to 10 CFR 50, Section 50.55a(g)(6)(i),

b. Surveillance intervals specified in Section XI of the ASME Boiler and Pressure Vessel Code and applicable Addenda for the inservice inspection and testing activities required by the ASME Boiler and Pressure Vessel Code and applicable Addenda shall be applicable as follows in these Technical Specifications:

WATERFORD - UNIT 3 3/4 0-2 9001020006 8^1219 PDR ADOCK 05000382 P PDC

.. . l O

BASES 4.0.1 This specification provides that surveillance activities necessary to ensure the Limiting Conditions for Operation are met and will be performed during the OPERATIONAL MODES or other conditions for which the Limiting Condi-tions for Operation are applicable. Provisions for additional surveillance activities to be performed without regard to the applicable OPERATIONAL MODES or other conditions are provided in the individual Surveillancs Requirements.

Surveillance Recuirements for Special Test Exceptions need only be performed when the Special Test Exception is being utilized as an exception to an individual specification.

4.0.2 The provisions of this specification provide allowable tolerances

- for performing surveillance activities beyond those specified in the nominal surveillance interval. These tolerances are necessary to provide operational flexibility because of scheduling and performance considerations. The phrase

at least" associated with a surveillance frequency does not negate this allowable tolerance value and permits the performance of more-frequent surveillance activities.

The tolerance values, taken either individually or consecutively over three test intervals, are sufficiently restrictive to ensure that the reliability associated with the surveillance activity is not significantly degraded beyond that obtained from the nominal specified interval.

4.0.3 The provisions of this specification set forth the criteria for determination of compliance with the OPERABILITY requirenents of the Limiting Conditions for Operation. Under this criteria, equipment, systems, or components are assumed to be OPERABLE if the associated surveillance activ-ities have been satisfactorily performed within the specified time interval.

Nothing in this provision is to be construed as defining equipment, systems, or components OPERABLE, when such items are found or known to be inoperable

- although still' meeting the Surveillance Requirements.

WATERFORD - UNIT 3 8 3/4 0-2

  • we+pyy. xpywsmcq+ vex wx mmmm_y~myn
1. ;. . .h 1

i

-e. 1

' T f

-s l

I

{' i l

1 ATTACHMENT B NPF-38-106

.. APPLICABILITY SURVEILLANCE REQUIREMENTS 4.0.1 Surveillance Requirements shall be applicable during the OPERATIONAL MODES or other conditions specified for individual Lir ting Conditions for ,

f Operation unless otherwise stated in an individual Surveillance Requirement. __

4 h.0.2 Each Surveillance Requirement shall be performed within the specified id ' time interval with: ,

a.- A maximum allowable extension not to exceed 25% of the surveillance interval, and

b. The combined time interval for any three consecutive surveillance intervals not to exceed 3.25 times the specified surveillance interval.

{

4.0.3 Failure to perform a Surveillance Requirement within the specified time interval shall constitute a failure to meet the OPERABILITY requirements for a Limiting Condition for Operation. Exceptions to these requirements are stated in the individual specifications. Surveillance Requirements do not have to be performed on inoperable equipment.

4.0.4 Entry 'into an OPERATIONAL MODE or other specified condition shall not be made unless the Surveillance Requirement (s) associated with the Limiting Condition for Operation have been performed within the stated surveillance

' interval or as otherwise specified.

4.0.5 Surveillance Requirements'for inservice inspection and testing of ASME Code Class 1, 2, and 3 components shall be applicable as follows:

a. Inservice inspection of ASME Code Class 1, 2, and 3 components and inservice testing ASME Code Class 1, 2 and 3 pumps and valves shall be performed in accordance with-Section XI of the ASME Boiler and Pressure Vessel Code and applicable Addenda as required by 10 CFR 50, Section 50.55a(g), except where specific written relief has been granted by the Commission pursuant to 10 CFR 50, Section 50.55a(g)(6)(i).
b. Surveillance intervals specified in Section XI of the ASME Boiler and Pressure Vessel Code and applicable Addenda for the inservice inspection and testing activities required by the ASME Boiler and Pressure Vessel Code and applicable Addenda shall be applicable as follows in these Technical Specifications:

WATERFORD - UNIT 3 3/4 0-2

e,, , .. ,

( r *.- c ; -- w w : - - - - - . - - - - - - - - -- - - - - - - - - - - - - - - - . - --

W a.y '.y) y. ~ . ., '+ ,r.

^

\

=

.y?

p ; ; p ,.s .Wf'fr e-l ?f)q .

'. {,

we s- t e -.- ;et g

-it c: a~, ..

s 4 i, _ , ,

-'Il .) -4 6

.?,'

y

,'p 314 m-s . .~ - -

s , ,

, 4 1

i n;n
ge,p#'

ly. > <

1 y ~- 1 gwc,u,v <

3- , o.

, se, , in ,

-(_. [ 7-j y'[il r 4' 3 s0 . 2 '. Each; Surveillance' Requirement : shall bei performed:within the S

- 4 si

~ .

t ijn specifiedisurveillancelinterval with a' maximum allowable extension'not to'- 3

]"

Wr f ;l Cexceed ' twenty-fivat percent: of1the specified surveillance interval.- >

, oa n -

8 Nh.[ .1

a--

r '- ,? ,

a g ,e 8.44

..i Ji h' .

if _- f 7 '

Qg?"- ,

, . -j 4., s a

3

.g -

A g .

W I

.w.  ?

@s m --

s r- i

.]

3-.- , , f j' ?e ' 'l p[.(;Ti ,+ ' ' '

-)

r. -

s y *,

. , r . 

                         ^                                     s                                                                                                                                                                                                                            '!   .

.- i 4 f, e i $ .,2 

$                      }                                    I                                                                                                                                                                                                                           :

m- 

                                                              , ci ,                                                                                                                                                                                                                                    .

J' -. 

                                                                                                                                                                                                                                                                                         ;L y                       !')            ;_                                                                                                                                                                                                                                                   -$
               ),

i .l' 3L 3 ,'I j I, ,- k 3 ..g.. ,i.4 Ib t 

                                                                                                                                                                                                                                                                                         .I.1   .}

n, h I .k . . t ) 

 ^ ti p
  • if i

i A p- 

                                                                                                                                                                                                                                                                                          h
                                                                                                                                                                                                                                                                                               'f
                              . ,Y y.;

f ( l 

         - 4 I,       'r e

i

u. .i S.m 3-P' s  :

n mw [: [.'. 2.. I t 1 

       - i '                                                                                                                                                                                                                                                                                          p
            ,         ~~1,                                                                            l E

w U L p., 

                              .p t
4
                                                      )8
               ~ , ' _^     ,

? '( 4 ti T_ f g t

L
                                                                   *')

I 1.1 j ) + - , '-- 

                                                                    +-

    ,      ,,                                                                                            1 I                 BASES i
                                                                                                        .I 4.0.1 This specification provides that surveillance activities necessary        ;

to ensure the Limiting Conditions for Operation are met and will be performed f during the OPERATIONAL MODES or other conditions for which the Limiting Condi-tions for Operation are applicable. Provisions for additional surveillance activities to be performed without regard to the applicable OPERATIONAL MODES- I or other conditions are provided in the individual Surveillance Requirements. l Surveillance Requirements for Special Test Exceptions need only be performed ' when the Special Test Exception is being utilized as an exception to an  ! individual specification. l d5 

  &'(                     4 3,2 ,The provisions of this specification provide allowable tolerances h     i NgI           for performing surveillance activit.ies beyond those specified in the nominal These tolerances are necessary to provide operational y@Yp{surveillanceinterval.

flexibility because of scheduling and performance considerations. The phrase j l "at least" associated with a surveillance frequency does not negate this ' allowable tolerance value and permits the performance of more frequent 

                  < surveillance activities.

!: The tolerance values, taken either individually or consecutively over  ! l three test intervals, are sufficiently restrictive to ensure that the reliability associated with the surveillance activity is not significantly degraded beyond l that obtained from the nominal specified interval. 4.0.3 The provisions of this specification set forth the criteria for determination of compliance with the OPERABILITY requirements of the Limiting

l. Conditions for Operation. Under this criteria, equipment, systems, or  ;

components are assumed to be OPERABLE if the associated surveillance activ- ' ities have been satisfactorily performed within the specified time interval. l Nothing in this provision is to be construed as defining equipment, systems, I or components OPERABLE, when such items are found or known to be inoperable although still meeting the Surveillance Requirements. i l 1 V L WATERFORD - UNIT 3 B 3/4 0-2

f -X ...[ 

~
^
        -s
      ~

p ,. , c ,-.. k Specification 4.0.2 establishes the limit for_which the specified time-i interval 1 f or Surveillance Requirements may be extended. It permits an allowable extension of the normal surveillance interval to f acilitate 

                              ~

surveillance scheduling and consideration of plant operating conditions that may not be. suitable f or conducting = the surveillance;; e.g. , transient conditions or.other ongoing surveillance or maintenance activities. It i, also provides flexibility to accommodate the length of a fuel cycle for 

;                  surveillances that~are performed at each refueling outage and are specified it                 with an:18-month surveillance interval. It is not intended that this            j provision be used repeatedly as a convenience to extend surveillance intervals beyond that specified for surveillances that are not performed during refueling outages. The. limitation-of Specification 4.0.2 is based-on engineering judgment and the recognition that the most probable result of any particular surveillance being performed is the verification of conformance with the Surveillance Requirements. -This provision is sufficient to ensure that the reliability ensured through surveillance activities is not significantly degraded beyond that obtained from the specified _ surveillance interval.                                               ,

b 

                                                                                                    !}}
Retrieved from "https://kanterella.com/w/index.php?title=ML20005D819&oldid=2476427"