LER-1980-006, Forwards LER 80-006/03L-0 |
| Event date: |
|
|---|
| Report date: |
|
|---|
| 2701980006R00 - NRC Website |
|
text
_
D UKE POWER COMPAN'I Powen 13u Lnixo we SouTu Cnuncu Srazer, CILAHLoTTP., N. C. 2824a wim m o.
.axca.sa.
July 25, 1980 Vicr perstormt TCl,Cpa=ON E; Aa C A 7C4 Seca.e Amoovction 373-4083 Mr. James P. O'Reilly, Director U. S. Nuclear Regulatory Commission Region II 101'Marietta Street, Suite 3100 Atlanta, Georgia 30303 Re: Oconee Unit 2 Docket No. 50-270
Dear Mr. O'Reilly:
Please find attached Reportable Occurrence Report R0-270/80-6. This report is submitted pursuant to Oconee Nuclear Station Technical Specification 6.6.2.1.b(2), which concerns operation in a degraded mode permitted by a limiting condition for operation, and describes an incident which is con-sidered to be of na significance with respect to plant safety nor to its effect on the health and safety of the public.
Very truly yours,
[.,4[ W
(#
I wM William O. Parker, Jr.
I JLJ:scs l
Attachment-6 cc: Director Mr. Bill Lavallee
.0ffice of Management & Program Analysis Nuclear Safety Analysis Center l
U. S. Nuclear Regulatory Commission P. O. Box 10412 i
Washington, D. C.
20555 Palo Alto, California 94303 I
i t
[002 S
8007149031Y
/
/
tj
o DUKE POWER COMPANY OCONEE UNIT 2 Report Number: R0-270/80-6 Report Date: July 25, 1980 Occurrence Date: June 25, 1980 Facility: Oconee Unit 2, Seneca, South Carolina Identification of Occurrence: Valve 2LP21 Inoperable Conditions Prior to Occurrence: 40% Full Power Description of ges -
nce:
At 1715 on June
.alve 2LP21 failed to open electrically upon command.
The valve was opm.
It was determined that the setscrew on a motor-driven pinion was loose. The problem was corrected.
At 2215 on June 25, the valve passed its performance test and was returned to service.
Apparent Cause of Occurrence:
The exact cause of this failure is difficult to determine. The screw may have been loosened when the motor was removed to facilitate repair on March 15, 1980, or it may have come loose from a combination of vibration and age.
There is also evidence which indicates that there may be an alignment problem with 2LP21's motor pinion assembly due to occurrences in the past.
Analysis of Occurrence:
Operation with one train of the low pressure injection (LPI) system out of service is permitted for up to 24 hours2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> provided the redundant train is operable.
In this particular incident the redundant train was available and the valve was returned to service well within the required 24 hour2.777778e-4 days <br />0.00667 hours <br />3.968254e-5 weeks <br />9.132e-6 months <br /> period permitted by Oconee Nuclear Station Technical Specification 3.3.2.b(2).
However, since tais incident consti-tuted operation in a degraded mode permitted by a limiting condition for operation, it must be reported in accordance with Technical Specification 6.6.2.1.b(2),
although it was concluded that no threat _ to plant safety nor to the health and safety of the public was posed.
Corrective Action
.The immediate corrective action was to use the manual handwheel to open the valve
.and declare the valve inoperable. The loose screw was repaired and the valve returned to service. The operability of the valve was then verified. The LPI valve motors on the other units will be checked for similar deficiencies. This will be-completed as soon as possible, i
|
|---|
|
|
| | | Reporting criterion |
|---|
| 05000270/LER-1980-003-01, /01T-0:on 800507,deborating Demineralizer Was Placed in Svc While Plant in Cold Shutdown & RCS Drained Down.Rcs Boron Concentration Reduced from 1,895 Ppm to 1,539 Ppm.Apparently Caused by Incorrect Chemistry Records | /01T-0:on 800507,deborating Demineralizer Was Placed in Svc While Plant in Cold Shutdown & RCS Drained Down.Rcs Boron Concentration Reduced from 1,895 Ppm to 1,539 Ppm.Apparently Caused by Incorrect Chemistry Records | | | 05000270/LER-1980-003, Forwards LER 80-003/01T-0 | Forwards LER 80-003/01T-0 | | | 05000270/LER-1980-006-03, /03L-0:on 800625,at 40% Full Power,Valve 2LP21 Failed to Open Electrically on Command.Caused by Loose Setscrew on Motor Driven Pinion.Screw Repaired | /03L-0:on 800625,at 40% Full Power,Valve 2LP21 Failed to Open Electrically on Command.Caused by Loose Setscrew on Motor Driven Pinion.Screw Repaired | | | 05000270/LER-1980-006, Forwards LER 80-006/03L-0 | Forwards LER 80-006/03L-0 | | | 05000259/LER-1980-009, Has Been Cancelled | Has Been Cancelled | | | 05000270/LER-1980-014, Forwards LER 80-014/03L-0 | Forwards LER 80-014/03L-0 | | | 05000270/LER-1980-014-03, /03L-0:on 800822,concentrated Boric Acid Storage Tank Pump Removed from Svc Due to Oil & Flange Leaks.Caused by Torn Oil Seal,Worn Worm Gear,Bad Flange Gasket & Stuck Pressure Relief Valve.Items Replaced | /03L-0:on 800822,concentrated Boric Acid Storage Tank Pump Removed from Svc Due to Oil & Flange Leaks.Caused by Torn Oil Seal,Worn Worm Gear,Bad Flange Gasket & Stuck Pressure Relief Valve.Items Replaced | | | 05000270/LER-1980-015, Forwards LER 80-015/03L-0 | Forwards LER 80-015/03L-0 | | | 05000270/LER-1980-015-03, /03L-0:on 800916,valve 2LP21 Failed to Open During Performance of Engineered Safeguard Channel Test.Caused by Loose Setscrew on Motor Driven Pinion.Screw Repaired | /03L-0:on 800916,valve 2LP21 Failed to Open During Performance of Engineered Safeguard Channel Test.Caused by Loose Setscrew on Motor Driven Pinion.Screw Repaired | | | 05000287/LER-1980-016-03, /03L-1:on 801123,fire Detectors String B-2 Went Into Alarm Condition.Caused by Dust Buildup in Detector. Detector Cleaned & Verified Operable | /03L-1:on 801123,fire Detectors String B-2 Went Into Alarm Condition.Caused by Dust Buildup in Detector. Detector Cleaned & Verified Operable | | | 05000287/LER-1980-016, Forwards LER 80-016/03L-1.Detailed Event Analysis Encl | Forwards LER 80-016/03L-1.Detailed Event Analysis Encl | | | 05000270/LER-1980-020, Forwards LER 80-020/03L-0 | Forwards LER 80-020/03L-0 | | | 05000270/LER-1980-020-03, /03L-0:on 801013,during Performance of Es on-line Test,Valve 2FDW-103 Failed to Close During Cycling.Caused by Failure of Torque Switch.Valve Manually Closed.Bad Torque Switch Replaced | /03L-0:on 801013,during Performance of Es on-line Test,Valve 2FDW-103 Failed to Close During Cycling.Caused by Failure of Torque Switch.Valve Manually Closed.Bad Torque Switch Replaced | | | 05000270/LER-1980-022-01, /01T-0:on 801011,four Holes Were Knocked in Fire Barrier Between Cable Spread Room & Turbine Bldg W/O Establishment of Hourly Fire Watch.Caused by Failure to Provide Proper Notificaion.Hourly Fire Watch Established | /01T-0:on 801011,four Holes Were Knocked in Fire Barrier Between Cable Spread Room & Turbine Bldg W/O Establishment of Hourly Fire Watch.Caused by Failure to Provide Proper Notificaion.Hourly Fire Watch Established | | | 05000270/LER-1980-022, Forwards LER 80-022/01T-0 | Forwards LER 80-022/01T-0 | | | 05000270/LER-1980-024, Forwards LER 80-024/03L-0 | Forwards LER 80-024/03L-0 | | | 05000270/LER-1980-024-03, /03L-0:on 801105,HPI Pump 2B Declared Inoperable Due to High Upper Bearing Temp.Caused by Isolation of Normal Cooling Water Supply to Unit 2 HPI Pumps,Personnel Error, Equipment Malfunction & Design Deficiency | /03L-0:on 801105,HPI Pump 2B Declared Inoperable Due to High Upper Bearing Temp.Caused by Isolation of Normal Cooling Water Supply to Unit 2 HPI Pumps,Personnel Error, Equipment Malfunction & Design Deficiency | | | 05000270/LER-1980-025, Forwards LER 80-025/03L-0 | Forwards LER 80-025/03L-0 | | | 05000270/LER-1980-025-03, /03L-0:on 801217,HPI Pump 2B Declared Inoperable Because Motor Indicated High Upper Bearing Temp.Caused by Personnel Error in Replacing Oil.High Bearing Temp Probably Due to Restricted Cooling Water Flow | /03L-0:on 801217,HPI Pump 2B Declared Inoperable Because Motor Indicated High Upper Bearing Temp.Caused by Personnel Error in Replacing Oil.High Bearing Temp Probably Due to Restricted Cooling Water Flow | | | 05000269/LER-1980-040-01, /01T-0:on 801226,removable Instrument Assembly 40 Count Rate Increased,Apparently Due to Leak in once-through Steam Generator Tube.Caused by High Cycle Fatigue.Tube Replaced.Leak Procedure Implemented | /01T-0:on 801226,removable Instrument Assembly 40 Count Rate Increased,Apparently Due to Leak in once-through Steam Generator Tube.Caused by High Cycle Fatigue.Tube Replaced.Leak Procedure Implemented | | | 05000269/LER-1980-040, Forwards LER 80-040/01T-0.Detailed Event Analysis Encl | Forwards LER 80-040/01T-0.Detailed Event Analysis Encl | |
|