ML19323D675
| ML19323D675 | |
| Person / Time | |
|---|---|
| Site: | Comanche Peak  |
| Issue date: | 03/12/1980 |
| From: | Gary R TEXAS UTILITIES ELECTRIC CO. (TU ELECTRIC) |
| To: | Seyfrit K NRC OFFICE OF INSPECTION & ENFORCEMENT (IE REGION IV) |
| References | |
| IEB-80-03, IEB-80-3, NUDOCS 8005220131 | |
| Download: ML19323D675 (2) | |
Text
.. ;t -
LPDR TIC #
NSIC TEXAS UTILITIES GENERATING COSIPANY CENTRAL FILES 2001 BRYAN TOWER = DAIJ A8.TELug 76201 March 12, 1980 a.a.aaar
".'Z,.r." ~"Jl:'
TXX-3108 Mr. Karl V. Seyfrit, Director U. S. Nuclear Regulatory Commission Region IV RIV 611 Ryan Plaza Drive, Suite 1000 Docket Nos. 50-445/IE Bulletin No. 80-03 Arlington, Texas 76012 50-446/IE Bulletin No. 80-03 COMANCHE PEAK STEAM ELECTRIC STATION 1981-83 2300 MW INSTALLATION IE BULLETIN 80-03 FILE N0:
10115
Dear Mr. Seyfrit:
In response to IE Bulletin 80-03 we offer the following:
1.
All adsorber cells for use at Comanche Peak are vertical deep-bed, permanent single unit type as manufactured by C.V,I. Corporation.
The perforated screens are secured to the frames by spot welds spaced at 2" centers.
2.
A visual inspection of the adsorber section was performed on a representative number of the units.
The inspection points and infor. nation documented was as follows:
A.
Unit Tag Number Manufacturer Model Number Serial Number Type Adsorber Cell j
B.
Screen Securing Method Spacing of Fastenings C.
Condition of Screen 1.
Evidence of sagging 2.
Defective fastenings 1
l 80052201'3l
\\
- t. s IE Bulletin No. 80-03 TXX-3108 Page 2 No defective spot welds were observed and there was no evidence of screens sagning away from the cell frames.
If there are any questions, please advise.
Very truly yours, R 'J. Ga ry RJG:df cc:
Director Division of Fuel Facility and Materials Safety Inspection Office of Inspection and Enforcement U. S. Nuclear Regulatory Commission Washington, D. C.
20555 i
l l
l l
1
,.