ML19317F700
| ML19317F700 | |
| Person / Time | |
|---|---|
| Site: | Davis Besse  |
| Issue date: | 05/06/1974 |
| From: | Schwencer A US ATOMIC ENERGY COMMISSION (AEC) |
| To: | Sampson G TOLEDO EDISON CO. |
| References | |
| NUDOCS 8001230595 | |
| Download: ML19317F700 (2) | |
Text
-
4
~
DISTRIBih' ION:
6 1974 LWR 2-3 Rdg VAM re Docket No. 50-346 DEisenhut RWKlecker ASchwencer IAPeltier The Toledo Edison Co::pany EIGoulbourne ATTN:
Mr. G1cun J. Sampson, ACRS (16)
Vice President, Power 300 Edison Plaza 5 extra cps Toledo, Ohio 43652 Gentlemen:
The P2gulatory staff has recently revised the procedures for the distribution of supplementary detailed data.. A copy of this procedure is enclosed for your information and guidance for future submittals of this type of information.
Sincerely.
Original 51gned A. Sctmencer, Chief Light Water Reactors 3r. 2-3 Directorate of Licensing
Enclosure:
Revised Distribution Procadure ecs: Donald H. Hauser, Esquire Las11e Henry, Esquire The Cleveland Electric Illuminating Co.
Fuller, Seney, Henry & Hodge P. O. Box 5000, Room 610 800 Owens-Illinois Bldg.
Cleveland, Ohio 44101 405 Madison Avenue Toledo, Ohio 43604 Gerald Charnoff, Esquire Shaw, Pittman, Potts. Trowbridge &
Madden 910 - 17th Street,I;W Washington, D. C.
20006 3001130 5 9 6 LS)
A or rie s,
, L:
2-3 ggp/.
LWR 2 IAPel
- land ASL Mencer 5/
(,7
/74 5/_f'
/7_4 oav e,
f
, _ m.,,....,, _,.
, ' - e 0
m
.6
/
PROCEDURE FOR SUBMITTM, OF SUPPLEMENTARY DETAILED DATA The procedure covers the submittal of detailed EI&C drawinas an a part of the FSAR as well as detailed data requested by the technical staff, such as card decks for computer codes, computer printouts,and detailed geologic; seismologic and foundation engineering information.
These categories of documents do not have to be placed in the PDR's due to,their excessive volume or details.
With respect to detailed EI&C drawings, the following procedure applies:
1.
Three copies of volumes containing all nonproprietary detailed EI&C drawings and all nonproprietary versions of proprietary detailed EI&C drawings shall be submitted.
2.
Three copies of proprietary detailed EI&C drawings shall be submitted.
3.
Nonproprietary schematics of the systems for which proprietary drawings are submitted will be included in the volume containing nonproprietary EI&C drawings.
4.
The applicant shall submit three copies of these volumes under 3
l separate cover and amend the FSAR by referencing this volume.
(Note: This volume will not be a part of the FSAR, it shall be treated as a reference document.)
i 3.
Each time a nonproprietary EI&C ducalled drawing is revised, the drawing will be submitted by revising the volume containing the EI&C detailed drawings. Three copies of the revision will be submitted.
6.
Each time a proprietary detailed drawing is revised, three copies
-of the tevised drawing will be submitted. The nonproprietary i
version of the proprietary drawing will be revised (if practical) to reflect the changes in the proprietary version. The volume containing the nonproprietary II&C detailed drawings will be revised accordingly. Three copies of the revision will be submitted.
7.
Section 1.6 of the FSAR shall include a list of the proprietary and nonproprietary drawings submitted in accordance with the above requirements. The list should include the drawing number, title, revision number, if applicable, and the date. The list should be revised aa necessary to conform to revisions made to the FSAR.
Other detailed information submitted in response to requests by the technical staff should also be submitted in triplicate.
The AEC PDR and Local PDR will be notified each time a submittal of
_ detailed information of this type is made, noting that the infor=ation
' is available for ' opying and inspection, but due to its nature it is noc c
being placed routinely in the PDR's This method will fulfill tha needs of the Regulatory staff, will provida a satisfactory record, and will greatly reduce the bulk of paper to be handled on the docket.
_ _. _ _ _ _