ML19298B478

Amendment 28 to Updated Final Safety Analysis Report, Appendix L, Reactor Pressure Vessel Design Summary Report - Unit 3

ML19298B478
Person / Time
Site:	Browns Ferry
Issue date:	10/04/2019
From:	Tennessee Valley Authority
To:	Office of Nuclear Reactor Regulation
Shared Package
ML19298B540	List: ML19298B452 ML19298B455 ML19298B456 ML19298B458 ML19298B461 ML19298B464 ML19298B467 ML19298B469 ML19298B471 ML19298B474 ML19298B477 ML19298B478 ML19298B480 ML19298B485 ML19298B488 ML19298B490 ML19298B497 ML19298B500 ML19298B508 ML19298B510 ML19298B515 ML19298B523 ML19298B525 ML19298B528
References
Download: ML19298B478 (3)

Text

BFN-16 APPENDIX L REACTOR PRESSURE VESSEL DESIGN

SUMMARY

REPORT - UNIT 3 TABLE OF CONTENTS L.1 Introduction................................................................................................................................L.0-1 L.2 Design and Fabrication Requirements - Summary....................................................................L.0-1 Reference..................................................................................................................................L.0-2 L.0-i

BFN-16 APPENDIX L REACTOR PRESSURE VESSEL DESIGN

SUMMARY

REPORT - UNIT 3 L.1 INTRODUCTION During the general update of the FSAR in 1984, the original Appendices J, K, and L were deleted and replaced with short summaries. At the request of NRC, these appendices were redocketed June 23, 1989 by the reference letter. Section L.2 is an abbreviated summary of the Unit 3 design and fabrication requirement presented in the redocketed Appendix L.

L.2 DESIGN AND FABRICATION REQUIREMENTS -

SUMMARY

The Browns Ferry reactor vessel, Unit No. 3, was designed, fabricated, inspected and tested in accordance with the American Society of Mechanical Engineers Boiler and Pressure Vessel Code,Section III Nuclear Vessels, 1965 Edition and Addenda to and including Summer 1966 Addenda, and the following additions:

a. Low alloy steel forgings for pressure parts in accordance with ASTM A-508 C1. 2 material, Code Case 1332-2.

b. Inconel nozzles in accordance with SB-166 material, Code Case 1336, paragraph 1.

c. Nozzle ends for austenitic pipe and flange ends for low alloy steel nozzles in accordance with SA-105 GR-II material, Code Case 1332-1.

d. Studs, nuts, bushings, and washers in accordance with ASTM A-540, GR. B23 or 24 material, Code Case 1335-2, paragraph 4, Class 3 or 5.

e. Shroud support legs, baffle plate, and ring in accordance with SB-168 annealed material, Code Case 1336.

f. Core spray brackets in accordance with ASTM A-276 TP 304 material, Code Case 1334.

The date of the contract between the Buyer, General Electric Company, Atomic Power Equipment Department, San Jose, California, and the Seller, Babcock and Wilcox Company, Barberton, Ohio, was January 20, 1967.

L.0-1

BFN-16 There are no deviations from the Code throughout the design, fabrication, inspection, and testing of the reactor vessels.

REFERENCE TVA Letter from M. J. Ray to U. S. Nuclear Regulatory Commission, Browns Ferry Nuclear Plant, Units 1, 2, 3, Original Final Safety Analysis Report (FSAR) Appendix J, K, and L submittals, June 23, 1989.

L.0-2