ML19263F400
| ML19263F400 | |
| Person / Time | |
|---|---|
| Site: | 07109027 |
| Issue date: | 01/16/1980 |
| From: | Macdonald C NRC OFFICE OF NUCLEAR MATERIAL SAFETY & SAFEGUARDS (NMSS) |
| To: | |
| Shared Package | |
| ML19263F398 | List: |
| References | |
| NUDOCS 8001280094 | |
| Download: ML19263F400 (2) | |
Text
.
Form NRC418 U.S. NUCLEAR REGULATORY COMMISSION CERTIFICATE OF COMPLIANCE 10 CFR 71 For Radioactive Materials Packages 1.(a) Certificate Number 1.(b) Revision No.
1.(c)
Pack *$e identificatio 1.(d) Pages No. 1.(e) Total No. Pages 9027 2
U A/9027/B 1
3
- 2. PREAMBLE 2.(a)
This certificate is issued to satisfy Sections 173.393a,173.394,173.395, and 173.396 of the Department of Transportation Hazardous Materials Regulations (49 CFR 170-189 and 14 CFR 103) and Sections 146-19-10a and 146-19-100 of the Department of Transportation Dangerous Cargoes Regulations (46 CFR 146-149), as amended.
2.(b)
The packaging and contents described in item 5 below, meets the safety standards set forth in Subpart C of Title 10, Code of Federal Regulations, Part 71," Packaging of Radioactive Materials for Transport and Transportation of Radioactive Material Under Certain Conditions."
2.(c)
This certificate does not relieve the consignor from compliance with any requirement of the regulations of the U.S. Department of Transportation or other applicable regulatory agencies, including the government of any country through or into which the package will be transported.
- 3. This certificate is issued on the basis of a safety analysis report of the package design or application-3.(a)
Prepared by (Name and address):
3.(b)
Title and identification of report or application:
Technical Operations, Inc.
Technical Operations, Inc. consolidated 40 North Avenue application dated November 29, 1979.
Burlington, MA 01803 3.(c)
Docket No.
- 4. CONDITIONS This certificate is conditional upon the fulfilling of the requirements of Subpart D of 10 CFR 71, as applicable, and the conditions specified in item 5 below.
- 5. Description of Packaging and Authorized Contents, Model Number, Fissile Class, Other Conditions, and
References:
(a)
Packaging (1) Models Nos.: 741 and 741E (2) Description A steel encased, uranium shielded Gamma Ray Projector.
Primary components consist of an outer steel shell, internal bracing, polyurethane potting material, depleted uranium shield, and a Zircalloy "S" tube. The contents are securely positioned in the Zircalloy "S" tube by a source cable locking device and shi;p n g plug. Tamper-proof seals are provided on the packaging and a 1/4-inch thick steel shipping plate is bolted over the source 1.ocking mechanism for additional protection during transport.
The total weight of the package is approximately 300 pounds.
~ 317 116 1
t i
8 U 01:4 8 g
[W
Page 2 - Certificate No. 9027 - Revision No. 2 - Docket No. 71-9027 5.
(a) Packaging (continued)
(3) Drawings The packaging is constructed in accordance with the following Technical Operations, Inc. Drawings:
74190, Sheets 1 through 5 66025, Sheets 2 and 3 (b) Contents (1) Type and form of material Cobalt-60 or iridium-192 as sealed sources which meet the requirements of special form as defined in 571.4(o) of 10 CFR Part 71.
(2) Maximum quantity of material per package 33 curies of cobalt-60; or 240 curies of iridium-192 6.
The package authorized by this certificate is hereby approved for use under the general license provisions of Paragraph 71.12(b) of 10 CFR Part 71, 7.
Expiration date: January 31, 1985.
REFERENCE Technical Operations, Inc. consolidated application dated November 29, 1979.
FOR THE U.S. NUCLEAR REGULATORY COMMISSION Charles E.
acDonald, Chief' Transportation Certification Branch Division of Fuel Cycle and
[
~ Material, Safety an u sso
~
1817 117 Date:
t
?
!