ML19254A892

From kanterella
Jump to navigation Jump to search
Forwards Request for Addl Info for Review of WMA-TR-1, TMI-2 Resin Solidification Value Impact Assessment
ML19254A892
Person / Time
Site: Crane 
Issue date: 08/14/1979
From: Jay Collins
NRC - TMI-2 OPERATIONS/SUPPORT TASK FORCE
To: Arnold R
GENERAL PUBLIC UTILITIES CORP.
References
NUDOCS 7909140136
Download: ML19254A892 (2)


Text

~

(LlJ 2 Jo 3D O pa neau y1 f,,

UNITED STATES y ' ),,

g NUCLEAR REGULATORY COMMISSION g

.3 E

WAFHINGToN, D. C. 20555 o#<%

Augu 979

'[

Docket No. 50-320 9/;g MEMORANDUM FOR:

R. C. Arnold, Vice President Generation, CPU FROM:

John T. Collins, Deputy Director

// p,.3 TMI-2 Support

%#f

SUBJECT:

TMI UNIT 2 RESIN SOLIDIFICATION VALUE IMPACT ASSESSMENT TECHNICAL REPORT WMA-TR-1 We have initiat' d our review of the subject report which was transmitted e

to me in your memo of August 1, 1979 and find that we need additional information and clarification of the data presented before we can complete our evaluation.

The required information is contained in.

Your early response to this request would be appreciated.

YWf John T. Collins, Deputy Director TMI-2 Support

Enclosure:

As Stated cc: w/ enclosure R. Vollmer R. Weller q909140

/

nA k

REQUEST FOR ADDITIONAL INFORMATION AND CLARIFICATION OF INFORMATION CONTAINED IN WMA-TR-1 Page ll, Evaluation You state that if solidifiestion is required, the increase in exposure is in the range of 35 to 130 Person-Rem. What percentage of this increase is due to solidification of Epicor-II resins? of SDS resins?

Page 27, Section 4.2 The assumption of one part resin to two parts concrete for solidification of SDS resins is in substantial error. If solidification of SDS 3 of resin resins is required Chem-Nuclear will use approximately 7 f t per container vice 10 f t3 for no solidification requirement. This error impacts on estimated volumes in later portions of the analysis.

Page 36, Solidification Systems The assumption that the solidification systems utilized are " temporary" and perhaps " portable" is inconsistent with the Evaluation on page 15 which estimates the cost for a system, including installation, at 2 to 4 million dollars.

90 e.

O\\

NG

- s d Ds

\\