ML18227A124
| ML18227A124 | |
| Person / Time | |
|---|---|
| Site: | 03035914 |
| Issue date: | 08/09/2018 |
| From: | Hanson L M NRC Region 4 |
| To: | K & N Limited Partnership |
| References | |
| 608888 | |
| Download: ML18227A124 (4) | |
Text
U.S. NUCLEAR REGULATORY COMMISSIONMATERIALS LICENSE NRC FORM 374PAGE OF14 Amendment No. 3 P AGESPursuant to the Atomic Energy Act of 1954, as amended, the Energy Reorganization Act of 1974 (Public Law 93-438), and Title 10, Code of Federal Regulations, Chapter I, Parts 30, 31, 32, 33, 34, 35, 36, 37, 39, 40, 70 and 71, and in reliance on statements and representations heretofore made by the licensee, a license is hereby issued authorizing the licensee to receive, acquire, possess, and transfer byproduct, source, and special nuclear material designated below; to use such material for the purpose(s) and at the place(s) designated below; to deliver or transfer such material to persons authorized to receive it in accordance with the regulations of the applicable Part(s). This license shall be deemed to contain the conditions specified in Section 183 of the Atomic Energy Act of 1954, as amended, and is subject to all applicable rules, regulations, and orders of the Nuclear Regulatory Commission now or hereafter in effect and to any conditions specified below.
LicenseeTwin Falls, ID 83301 2.751 Madrona Street South 1.K & N Limited Partnership 4.Expiration Date:
February 28, 2022 Docket No.:
5.030-35914License number: 11-27717-01 is amended in its entirety to read as follows: Reference No.:
3.In accordance with letter dated May 1 1, 2018 6.7.8.Byproduct, source, and/or special nuclear material Chemical and/or physical form Maximum amount that licensee
may possess at any one time
under this license 9.Authorized use A.A.A.A.For use in Troxler Electronic Laboratories Model 3400 Series portable gauging devices for measuring
physical properties of materials.Sealed Sources (AEA Technology/QSA, Inc., Model
CDCW556; Isotope Product
Laboratories, Model HEG-137) 9 millicuries per source
and 9 millicuries total Cesium-137 B.B.B.B.For use in Troxler Electronic
Laboratories Model 3400 Series
portable gauging devices for measuring
physical properties of materials.Sealed Neutron Source (AEA Technology/QSA, Inc., Model
AMNV.997; Isotope Product Laboratories, Model AM1.NO2, 3021, or 3027) 44 millicuries per source
and 44 millicuries total Americium-241/
Beryllium CONDITIONS 10.Licensed material may be used or stored at the licensee's facilities located at:
A.505 East Ellis Street (Highway 25), Paul, Idaho; B.837 Madrona Street South, Twin Falls, Idaho; License Number Docket or Reference NumberU.S. NUCLEAR REGULATORY COMMISSION NRC FORM 374AMATERIALS LICENSESUPPLEMENTARY SHEETPAGES OFPAGE42 1 1-27717-01 030-35914 Amendment No. 3 C.253 West Highway 30, Burley, Idaho; and D.Licensed material may be used at temporary job sites anywhere in the United States where the U.S. Nuclear Regulatory Commissionmaintains jurisdiction for regulating the use of licensed material, including areas of exclusive Federal jurisdiction within Agreement States.If the jurisdiction status of a Federal facility within an Agreement State is unknown, the licensee should contact the Federal agency controlling the job site in question to determine whether the proposed job site is an area of exclusive Federal jurisdiction. Authorizationfor use of radioactive materials at job sites in Agreement States not under exclusive Federal jurisdiction shall be obtained from the appropriate state regulatory agency.11.Licensed material shall only be used by, or under the supervision and in the physical presence of, individuals who have received the trainingdescribed in the application dated November 18, 2011. The licensee shall maintain records of individuals designated as users for 3 years following the last use of licensed material by the individual.
12.The Radiation Safety Officer (RSO) for this license is Larry S. Kloepfer.
13.A.Sealed sources shall be tested for leakage and/or contamination at intervals not to exceed the intervals specified in the certificate ofregistration issued by the U.S. Nuclear Regulatory Commission under 10 CFR 32.210 or by an Agreement State. In the absence of a registration certificate, sealed sources shall be tested for leakage and/or contamination at intervals not to exceed 6 months, or at such other intervals as specified.
B.In the absence of a certificate from a transferor indicating that a leak test has been made within the intervals specified in the certificate ofregistration issued by the U.S. Nuclear Regulatory Commission under 10 CFR 32.210 or by an Agreement State, prior to the transfer, a sealed source received from another person shall not be put into use until tested and the test results received.
C.Sealed sources need not be tested if they are in storage and are not being used. However, when they are removed from storage for use
or transferred to another person, and have not been tested within the required leak test interval, they shall be tested before use or transfer. No sealed source shall be stored for a period of more than 10 years without being tested for leakage and/or contamination.
License Number Docket or Reference NumberU.S. NUCLEAR REGULATORY COMMISSION NRC FORM 374AMATERIALS LICENSESUPPLEMENTARY SHEETPAGES OFPAGE43 1 1-27717-01 030-35914 Amendment No. 3 D.The leak test shall be capable of detecting the presence of 185 becquerels (0.005 microcuries) of radioactive material on the test sample. If the test reveals the presence of 185 becquerels (0.005 microcuries) or more of removable contamination, a report shall be
filed with the U.S. Nuclear Regulatory Commission in accordance with 10 CFR 30.50(c)(2), and the source shall be removed immediately from service and decontaminated, repaired, or disposed of in accordance with Commission regulations.
E.Analysis of leak test samples and/or contamination shall be performed by persons specifically licensed by the U.S. Nuclear Regulatory
Commission or an Agreement State to perform such services. The licensee is authorized to collect leak test samples but not perform the analysis.
F.Records of leak test results shall be kept in units of becquerels (microcuries) and shall be maintained for 3 years.
14.Sealed sources or source rods containing licensed material shall not be opened or sources removed from source holders or detached from
source rods by the licensee, except as specifically authorized.
15.The licensee shall conduct a physical inventory every 6 months, or at other intervals approved by the U.S. Nuclear Regulatory Commission, to account for all sealed sources and/or devices received and possessed under the license. Records of inventories shall be maintained for 3
years from the date of each inventory, and shall include the radionuclides, quantities, manufacturer's name and model numbers, and the date of the inventory.
16.Except for maintaining labeling as required by 10 CFR Part 20, or Part 71, the licensee shall obtain authorization from the U.S. Nuclear Regulatory Commission before making any changes in the sealed source, device, or source-device combination that would alter the
description or specifications as indicated in the respective certificate of registration issued either by the U.S. Nuclear RegulatoryCommission pursuant to 10 CFR 32.210 or by an Agreement State.
17.Each portable nuclear gauge shall have a lock or outer locked container designed to prevent unauthorized or accidental removal of the sealed source from its shielded position. The gauge or its container must be locked when in transport or storage, or when not under the direct surveillance of an authorized user.
License Number Docket or Reference NumberU.S. NUCLEAR REGULATORY COMMISSION NRC FORM 374AMATERIALS LICENSESUPPLEMENTARY SHEETPAGES OFPAGE44 1 1-27717-01 030-35914 Amendment No. 3Any cleaning, maintenance, or repair of the gauge(s) that requires detaching the source or source rod from the gauge shall be performedonly by the manufacturer or by other persons specifically licensed by the U.S. Nuclear Regulatory Commission or an Agreement State toperform such services.Except as specifically provided otherwise in this license, the licensee shall conduct its program in accordance with the statements,representations, and procedures contained in the documents, including any enclosures, listed below. This license condition applies only tothose procedures that are required to be submitted in accordance with the regulations. The U.S. Nuclear Regulatory Commission'sregulations shall govern unless the statements, representations, and procedures in the licensee's application and correspondence are morerestrictive than the regulations.Application dated November 18, 201 1 (ML1334A164)Letter dated January 31, 2012 (ML120330266)Letter dated May 1 1, 2018 (ML18155A541E-mails dated August 8, 2018 with enclosures (ML18221A360) FOR THE U.S. NUCLEAR REGULATORY COMMISSION By: Date: Latischa M. HansonRegion August 9, 2018