ML18094B259

Proposed Tech Specs,Clarifying Statements to Channel Functional Test Requirements,Per Table 4.3-13 of 3.3.3.9

ML18094B259
Person / Time
Site:	Salem
Issue date:	01/22/1990
From:	Public Service Enterprise Group
To:
Shared Package
ML18094B258	List: ML18094B257 ML18094B259
References
NUDOCS 9001310530
Download: ML18094B259 (1)

Text

.. *~ ~* ',.. ..... *'"'

~

TABLE 4,3-13 !Continued)

• ( 1)

TABLE NOTATION The CHANNEL FUNCTIONAL TEST shall also demonstrate tnat automatic isolation of this pathway and control roo~

alarm annunciation occurs if any of the following conditions exist:

1. Instrument indicates measured levels above the alarm/trip setpoint.

2. Circuit failure. (Loss of Power).

3.

(2) demonstrate that control room alarm annunciation occurs i~ any of the following conditions exist:

1. Instrument indicates 1TP.asured levels above the alarm/trip setpoint.

2. Circuit failure. (Loss of Power)

• (3)

3. _...!.,~~~~~~~~~~~~=--.:.~~~

4. ~I~~~:_.::~~~~~~-!..!.!--~~~

OA I The initial CHANNEL CALIBRATION was performed using appropriate liq~id or gaseous calibration sources obtained from reputable suppliers. The activity of the calibration sources were reconfirmed using a multi-channel analyzer which was calibrated using one or more NBS standards.

(4) The CHANNEL CALIBRATION shall include the use of standard gas samples containing a nominal:

1*. One volume percent oxygen, balance nitrogen, and

2. Four volume percent oxygen, balance nitrogen.

• At al 1 times

'*During waste gas holdup system.operation.

• • • During containment purge or containment pressure -

vacuum relief.

SALEt UNIT l 3/4 3-69 . Amendment No. 79 9001310530 900122 PDR A:OOC:I< 0500~E1t?

p