ML18093A918

From kanterella
Jump to navigation Jump to search
Proposed Tech Specs Revising Sections 3.1.3.4 & 3.1.3.5 to Correct Typos Incorporated by Previously Approved Amend
ML18093A918
Person / Time
Site: Salem  PSEG icon.png
Issue date: 06/23/1988
From:
Public Service Enterprise Group
To:
Shared Package
ML18093A916 List:
References
NUDOCS 8807010602
Download: ML18093A918 (8)
v • d • e


Text

REACTIVITY CONTROL SYSTEMS POSITION INDICATION SYSTEM SHlITOOWN LIMITING CONDITION FOR OPERATION 3.1.3.4 All shutdown rods shall be fully withdrawn.

APPLICABILITY: MO DES l*, and 2*#@

ACTION:

With a maximum of one shutdown rod not fully withdrawn, except for surveillance.

testing pursuant to Specification 4.1.3.1.2, within one hour either:

a. Fully withdraw the rod, or
b. Declare the rod to be inoperable and apply Specification 3.1.3.1.

SURVEILLANCE REQUIREMENTS 4.1.3.4 Each shutdown rod shall be determined to be fully withdrawn by use of the group demand counters, and verified by the analog rod position indicators: I

a. Within 15 minutes prior to withdrawal of any control bank during an I approach to reactor critically, and
b. At least once per 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> thereafter.
  • See Special Test Exceptions 3.10.2 and 3.10.3.
  1. With Keff greater than or equal to 1.0.

@Surveillance 4.1.3.4.a is applicable prior to withdrawing control banks in preparation for startup (Mode 2). l SALEM - UNIT 1 3/4 1-22 8807010602~880623 r PDR p

ADOCK 05000272 DCD

REACTIVITY CONTROL SYSTEMS POSITION INDICATION SYSTEM SHUfOOWN LIMITING CONDITION FOR OPERATION 3.1.3.5 The control banks shall be limited in physical insertion as shown in Figures 3.1-1 and 3.1-2.

APPLICABILITY: MODES l* and 2*#

ACTION:

With the control banks inserted beyond the above insertion limits, except for surveillance testing pursuant to Specification 4.1.3.1.2, either:

a. Restore the control banks to within the limits within two hours, or
b. Reduce THERMAL POWER within two hours to less than or equal to that fraction of RATED THERMAL POWER which is allowed by the bank position using the above figures, or
c. Be in at least HOT STANIBY within 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br />.

SURVEILIJ.\NCE REQUIREMENTS 4.1.3.5 The position of each control bank shall be determined to be within the insertion limits at least once per 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> by use of the group demand counters and verified by the analog rod position indicators, except during time intervals when the Rod Insertion Limit Monitor is inoperable, then verify the individual rod positions at least once per 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br />.

  • See Special Test Exceptions 3.10.2 and 3.10.3.
  1. With Keff greater than or equal to 1.0 SALEM - UNIT 1 3/4 1-23

REACTIVITY CONTROL SYSTEMS POSITION INDICATION SYSTEM SHUTOOWN LIMITING CONDITION FOR OPERATION 3.1.3.4 All shutdown rods shall be fully withdrawn.

APPLICABILITY: MO DES 1*, and 2*#@

ACTION:

With a maximum of one shutdown rod not fully withdrawn, except for surveillance testing pursuant to Specification 4.1.3.1.2, within one hour either:

a. Fully withdraw the rod, or
b. Declare the rod to be inoperable and apply Specification 3.1.3.1.

SURVEILLANCE REQUIREMENTS 4.1.3.4 Each shutdown rod shall be determined to be fully withdrawn by use of the group demand counters, and verified by the analog rod position indicators:

a. Within 15 minutes prior to withdrawal of any control bank during an approach to reactor critically, and
b. At least once per 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> thereafter.
  • See Special Test Exceptions 3.10.2 and 3.10.3.
  1. With Keff greater than or equal to 1.0.

@Surveillance 4.1.3.4.a is applicable prior to withdrawing control banks in preparation for startup (Mode 2).

SALEM - UNIT 2 3/4 1-19

REACTIVITY CONTROL SYSTEMS POSITION INDICATION SYSTEM SHUTOOWN

.LIMITING CONDITION FOR OPERATION 3.1.3.5 The control banks shall be limited in physical insertion as shown in Figures 3.1-1 and 3.1-2.

APPLICABILITY: MOIES l* and 2*#

ACTION:

With the control banks inserted beyond the above insertion limits, except for surveillance testing pursuant to Specification 4.1.3.1.2, either:

a. Restore the control banks to within the limits within two hours, or
b. Reduce THERMAL POWER within two hours to less than or equal to that fraction of RATED THERMAL POWER which is allowed by the bank position using the above figures, or
c. Be in at least HOT STANIBY within 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br />.

SURVE I LI.ANGE REQUIREMENTS 4.1.3.5 The position of each control bank shall be determined to be within the insertion limits at least once per 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> by use of the group demand counters and verified by the analog rod position indicators, except during time intervals when the Rod Insertion Limit Monitor is inoperable, then verify the individual rod positions at least once per 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br />.

  • See Special Test Exceptions 3.10.2 and 3.10.3.
  1. With Keff greater than or equal to 1.0 SALEM - UNIT 2 3/4 1-20

REACTIVITY CONTROL SYSTEMS POSITION INDICATION SYSTEM SHUTOO~

LIMITING CONDITION FOR OPERATION 3.1.3.5 The control. banks shall be limited in physical insertion as shown in Figures 3.1-1 and 3.1-2.

APPLICABILITY: MODES l*, and 2

  • t ACiION:

With the control banks inserted beyond the above insertion 1imits~ except for surveillance testing pursuant ta Specification 4.1.3.1.2, either:

a. Restore the control banks ta within the limits within ba tl>urs, or
b. Reduce THERMAL FOe within t'IG taurs ta less than or equal ta that fraction of RATED THERMAL POlrER which is al lowed by the bank..,,

position using the above figures, or

c. Be in at least HOT STANDBY within 6 hours6.944444e-5 days <br />0.00167 hours <br />9.920635e-6 weeks <br />2.283e-6 months <br />.

SURVEILLANCE REQJIREMENTS 4.1.3.5 The position of each control bank shall be determined to be within the insertion 1imits at least once per 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> by use of the group demand counters and verified by the analog rod position indicators *1tb1n on* im~r ar 1 a4 mt1o~*, except during time intervals when the Rod Insertion Limit flbnitor is*1noperable, then verify tne 1ndhidua1 rod positions at least once per 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br />.

  • See Spec1a1-T*st Exc1ptions 3.10.2 and 3.10.3 lwt th l<eff- gr_11ter than or aqua l ta l .o SALEM- - UNIT l 3/4 1-23 Amendment No. 73
  • e REACTIVITY COKTROL SYSTEMS POSITION INDICATION SYSTEM SHUTOO\i.N LIMITING CONDITION FOR OPERATION 3.l.3.4 All shutdown rods shall be fully withdrawn.

APPLICABILITY:. -MODES l*, and 2*1@)

ACTION:

With a. maximu11 of on* shutdown rod nat fully withdrawn, except _for surveillance testing pursuant ta Sp1cification 4.1.3.1.2, within on1 t'our either:

a. Fully withdraw the rod., or
b. Declare th9 rod ta be inoperable and apply Specification 3.1.3 .l.

SURVEILLANCE RE(JJIREMENTS .

4.1.3 .4 Each shutdown rod shal 1 be determined ta be fully withdrawn by use ,..

~~di~:~:: 1 ::.:n:,,:t:!:r!n!~dFt":r!!!i:a~Y the analog rod position .

a. Within 15 minutes prior ta withdrawal of any ri:a41 111 control banks A, a, e, or a during an approach ta reactor critically, a~ .
b. At 1east onc1 ptr 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> thereafter *
  • See Special Test Exceptions 3.10.2 and 3.10.3
  1. wt th Ketfc gr11ur than or equa1 ta l .o

@ SurHi_l\an~c. tt~l.3.4 a 1S a..pplic....lo!e prior to withcl.r(lw.)~Y'lj confro/ bo..nkS In p!"e.~cz..r-4..-\-1°"- ~or- S"fU'fUP (M.oJ.ai).

SALEM - UNIT l . 3/4 1-22 Amendment No. 73

REACTIVITY CONTROL SYSTEMS POSITION INDICATION SYSTEM SHUTDO~

LIMITING CONDITION FOR OPERATION 3 .1.3 .4 Al 1 shutdown rods shall b9 fully withdrawn.

APPLICABILITY: MODES l*, and 2

  • t@

ACTION:

With a maxil!Ull of one shu~dawn rod not fully withdrawn, except for

. surveillance testing pur$uant to Specification 4.1.3.1.2, within one tour either: *

.
  • Fully ~ithdraw the f"Od,, or
b. Declare the rod ta be inoperable and apply Specification 3 .1.3 .1.

SURVEILLANCE RECJJIREMENTS 4 .1.3 .4 Each shutdown rod sha 11 be determi.n~ to be fully w1 thdrawn by use of the ~up demand counters, and verified by the analog rod position i nd1cators:wita1 n one bo~r after 1od nation: *

a. Within 15 minutes pr.ior to withdrawal of iii# FOdl la control banks '* a, e, WF D during an approach to reactor cr1tfcal ly, and
  • b* At 1east onee per 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> thereafter *
  • See s.-ctal.T*st Exceptions 3.10.2 and 3.10.3
  1. With ~ff greater than or equal to 1.0

@ Su1' ~e_*,ttCL't'\(e l{.I. '3.l( a is 0-fflica..lole. pf'ibr fc c.,.,;tf.tdl"du.Ji"'J Con tro I b<l.11k.r i \'\ pl"e. ptt.('a...tio'I-\ fo"' S'tAR..T I.) P ( M.D Di: '2...J SALEM

  • UNIT 2 3/4 1-19 Amendment No. 48

REACTIVITY CONTROL SYSl~

POSITION INDieATION SYSTEM SHUTDO!ili LIMITING CONDITION FOR OPERATION 3.1.3.S The control banks shall be 1 im;ted in physical insertion as shown in Figures 3.1-l and *3.l-2.

APPLICABILITY:* MODES l*, and 2*1 ACTION:

wt th the control banks inserted beyond the abaye insertion 1 imits, except for surveillance testing pursuant to Specification 4.1.3.1.2, either:

a. Restore the control banks ta within the limits within t'IO t'llurs, or
b. Reduce THERMAL P0'1£R within t\IG hours to less than or equal to that fraction of RATED THERMAL P0'1ER which is al lowed by the bank*".

position using the above figures, or

c. Be in at least HOT STANDBY within 6 t'llurs.

SURVEILLANCE REQJIREMENTS 4.1.3.S The position of each control bank shall be determined to be within the insertion limits at least once per 12 hours1.388889e-4 days <br />0.00333 hours <br />1.984127e-5 weeks <br />4.566e-6 months <br /> by use of the group demand counters. and verified by the analog rod position .indicators wttnh al!le ~tW

", md HDtio:a, except during time intervals when the Rod Insertion Limit Monitor is inoperable, then Y9rify the individual rod positions at least once per 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br />.

  • See Special Test Exceptions 3.10.2 and 3.10.3 lwtth Katt great* thin or equal to 1.Q SALEM - tJN IT 2 3/4 1-20 Amendment No. 48
Retrieved from "https://kanterella.com/w/index.php?title=ML18093A918&oldid=2410300"