ML18087A366
| ML18087A366 | |
| Person / Time | |
|---|---|
| Site: | 03038694 |
| Issue date: | 03/27/2018 |
| From: | Latischa Hanson NRC Region 4 |
| To: | Knik Construction |
| References | |
| 602178 | |
| Download: ML18087A366 (5) | |
See also: IR 05000351/2014001
Text
NRC FORM 374 PAGE 1 OF 5 PAGES
U.S. NUCLEAR REGULATORY COMMISSION Amendment No. 3
MATERIALS LICENSE
Pursuant to the Atomic Energy Act of 1954, as amended, the Energy Reorganization Act of 1974 (Public Law 93-438), and Title 10, Code of Federal Regulations, Chapter I,
Parts 30, 31, 32, 33, 34, 35, 36, 37, 39, 40, 70 and 71, and in reliance on statements and representations heretofore made by the licensee, a license is hereby issued
authorizing the licensee to receive, acquire, possess, and transfer byproduct, source, and special nuclear material designated below; to use such material for the purpose(s)
and at the place(s) designated below; to deliver or transfer such material to persons authorized to receive it in accordance with the regulations of the applicable Part(s). This
license shall be deemed to contain the conditions specified in Section 183 of the Atomic Energy Act of 1954, as amended, and is subject to all applicable rules, regulations,
and orders of the Nuclear Regulatory Commission now or hereafter in effect and to any conditions specified below.
Licensee In accordance with letter dated 4. Expiration Date: December 31, 2023
January 16, 2018
1. Knik Construction
5. Docket No.: 030-38694
2. 6400 South Airpark Drive 3. License number: 50-35114-01 is Reference No.:
Anchorage, AK 99502 amended in its entirety to read as
follows:
6. Byproduct, source, 7. Chemical and/or physical form 8. Maximum amount that licensee 9. Authorized use
and/or special nuclear may possess at any one time
material under this license
A. Cesium-137 A. Sealed Sources (AEA A. 9 millicuries per source A. For use in Troxler Electronic
Technology/QSA, Inc., Model and 45 millicuries total Laboratories Model 3400 Series
CDCW556; Isotope Product portable gauging devices for measuring
Laboratories, Model HEG-137) physical properties of materials.
B. Americium-241/ B. Sealed Neutron Source (AEA B. 44 millicuries per source B. For use in Troxler Electronic
Beryllium Technology/QSA, Inc., Model and 220 millicuries total Laboratories Model 3400 Series
AMNV.997; Isotope Product portable gauging devices for measuring
Laboratories, Model AM1.NO2, physical properties of materials.
3021, or 3027)
C. Californium-252 C. Sealed Neutron Source (AEA C. 66 microcuries per source C. For use in Troxler Electronic
Technologies, Model CVN.1, and 66 microcuries total Laboratories Model 3400 Series
Capsule Type X.1; Isotope portable gauging devices for measuring
Product Laboratories, Model physical properties of materials.
HEG-252)
NRC FORM 374A U.S. NUCLEAR REGULATORY COMMISSION PAGE 2 OF 5 PAGES
License Number Docket or Reference Number
50-35114-01 030-38694
MATERIALS LICENSE
SUPPLEMENTARY SHEET Amendment No. 3
6. Byproduct, source, 7. Chemical and/or physical form 8. Maximum amount that licensee 9. Authorized use
and/or special nuclear may possess at any one time
material under this license
D. Americium-241/ D. Sealed Neutron Source D. 110 millicuries per source D. For use in Troxler Electronic
Beryllium (Amersham Corporation, Model and 550 millicuries total Laboratories Model 3241-C portable
AMNV.340 or AMNV.339) gauging devices for measuring physical
properties of materials.
E. Radium-226/ Beryllium E. Sealed Neutron Source (Nuclear E. 5.5 millicuries per source E. For use in Seaman Nuclear Corporation
Sources and Services, Model and 5.5 millicuries total Model C-200 Series portable gauging
AN-HPG, or GT-GHP) devices for measuring physical
properties of materials.
F. Radium-226/ Beryllium F. Sealed Neutron Source (AEA F. 5.5 millicuries per source F. For use in Seaman Nuclear Corporation
Technology, Model RAN.C1; and 5.5 millicuries total Model C-300 Series portable gauging
Gammatron, Model GT-GHP; devices for measuring physical
Radium Chemical Corporation, properties of materials.
Model Drawing 21.94)
G. Cesium-137 G. Sealed Sources (AEA G. 11 millicuries per source G. For use in Humboldt Scientific, Inc.,
Technology/QSA, Inc., Model and 22 millicuries total Model 5001EZ portable gauging devices
CDC.805; Isotope Product for measuring physical properties of
Laboratories, Model HEG-137) materials.
H. Americium-241/ H. Sealed Neutron Source (AEA H. 44 millicuries per source H. For use in Humboldt Scientific, Inc.,
Beryllium Technology/QSA, Inc., Model and 88 millicuries total Model 5001EZ portable gauging devices
AMN.V997; Isotope Product for measuring physical properties of
Laboratories, Model Am1.NO2) materials.
CONDITIONS
10. Licensed material may be used or stored at the licensee's facilities located at:
A. 1171 Old First Avenue, Bethel, Alaska, 99559;
B. 44482 Frontier Avenue, Soldotna, Alaska, 99669;
C. 6400 South Airpark Drive, Anchorage, Alaska, 99502; and
NRC FORM 374A U.S. NUCLEAR REGULATORY COMMISSION PAGE 3 OF 5 PAGES
License Number Docket or Reference Number
50-35114-01 030-38694
MATERIALS LICENSE
SUPPLEMENTARY SHEET Amendment No. 3
D. Temporary job sites anywhere in the United States where the U.S. Nuclear Regulatory Commission maintains jurisdiction for regulating
the use of licensed material, including areas of exclusive Federal jurisdiction within Agreement States.
If the jurisdiction status of a Federal facility within an Agreement State is unknown, the licensee should contact the Federal agency
controlling the job site in question to determine whether the proposed job site is an area of exclusive Federal jurisdiction. Authorization
for use of radioactive materials at job sites in Agreement States not under exclusive Federal jurisdiction shall be obtained from the
appropriate state regulatory agency.
11. Licensed material shall only be used by, or under the supervision and in the physical presence of, individuals who have received the training
described in the e-mail with attachments received November 13, 2013. The licensee shall maintain records of individuals designated as
users for 3 years following the last use of licensed material by the individual.
12. The Radiation Safety Officer (RSO) for this license is Amanda Gilliland.
13. A. Sealed sources shall be tested for leakage and/or contamination at intervals not to exceed the intervals specified in the certificate of
registration issued by the U.S. Nuclear Regulatory Commission under 10 CFR 32.210 or by an Agreement State. In the absence of a
registration certificate, sealed sources shall be tested for leakage and/or contamination at intervals not to exceed 6 months, or at such
other intervals as specified.
B. In the absence of a certificate from a transferor indicating that a leak test has been made within the intervals specified in the certificate of
registration issued by the U.S. Nuclear Regulatory Commission under 10 CFR 32.210 or by an Agreement State, prior to the transfer, a
sealed source received from another person shall not be put into use until tested and the test results received.
C. Sealed sources need not be tested if they are in storage and are not being used. However, when they are removed from storage for use
or transferred to another person, and have not been tested within the required leak test interval, they shall be tested before use or
transfer. No sealed source shall be stored for a period of more than 10 years without being tested for leakage and/or contamination.
NRC FORM 374A U.S. NUCLEAR REGULATORY COMMISSION PAGE 4 OF 5 PAGES
License Number Docket or Reference Number
50-35114-01 030-38694
MATERIALS LICENSE
SUPPLEMENTARY SHEET Amendment No. 3
D. The leak test shall be capable of detecting the presence of 185 becquerels (0.005 microcuries) of radioactive material on the test
sample. If the test reveals the presence of 185 becquerels (0.005 microcuries) or more of removable contamination, a report shall be
filed with the U.S. Nuclear Regulatory Commission in accordance with 10 CFR 30.50(c)(2), and the source shall be removed
immediately from service and decontaminated, repaired, or disposed of in accordance with Commission regulations.
E. Analysis of leak test samples and/or contamination shall be performed by persons specifically licensed by the U.S. Nuclear Regulatory
Commission or an Agreement State to perform such services. The licensee is authorized to collect leak test samples but not perform
the analysis.
F. Records of leak test results shall be kept in units of becquerels (microcuries) and shall be maintained for 3 years.
14. Sealed sources or source rods containing licensed material shall not be opened or sources removed from source holders or detached from
source rods by the licensee, except as specifically authorized.
15. The licensee shall conduct a physical inventory every 6 months, or at other intervals approved by the U.S. Nuclear Regulatory Commission,
to account for all sealed sources and/or devices received and possessed under the license. Records of inventories shall be maintained for 3
years from the date of each inventory, and shall include the radionuclides, quantities, manufacturer's name and model numbers, and the
date of the inventory.
16. Except for maintaining labeling as required by 10 CFR Part 20, or Part 71, the licensee shall obtain authorization from the U.S. Nuclear
Regulatory Commission before making any changes in the sealed source, device, or source-device combination that would alter the
description or specifications as indicated in the respective certificate of registration issued either by the U.S. Nuclear Regulatory
Commission pursuant to 10 CFR 32.210 or by an Agreement State.
17. Each portable nuclear gauge shall have a lock or outer locked container designed to prevent unauthorized or accidental removal of the
sealed source from its shielded position. The gauge or its container must be locked when in transport or storage, or when not under the
direct surveillance of an authorized user.
NRC FORM 374A U.S. NUCLEAR REGULATORY COMMISSION PAGE 5 OF 5 PAGES
License Number Docket or Reference Number
50-35114-01 030-38694
MATERIALS LICENSE
SUPPLEMENTARY SHEET Amendment No. 3
18. Any cleaning, maintenance, or repair of the gauge(s) that requires detaching the source or source rod from the gauge shall be performed
only by the manufacturer or by other persons specifically licensed by the U.S. Nuclear Regulatory Commission or an Agreement State to
perform such services.
19. Except as specifically provided otherwise in this license, the licensee shall conduct its program in accordance with the statements,
representations, and procedures contained in the documents, including any enclosures, listed below. This license condition applies only to
those procedures that are required to be submitted in accordance with the regulations. The U.S. Nuclear Regulatory Commission's
regulations shall govern unless the statements, representations, and procedures in the licensee's application and correspondence are more
restrictive than the regulations.
A. Application dated July 31, 2013 (ML13281A912)
B. E-mail with attachments received November 13, 2013 (ML13324A263)
C. Letter dated November 17, 2013 (ML13352A080)
D. Letter dated January 16, 2018 (ML18031B164)
E. E-mail dated March 26, 2018 with attachment (ML18086A500)
FOR THE U.S. NUCLEAR REGULATORY COMMISSION
/RA/
Date: March 27, 2018 By:
Latischa M. Hanson
Region IV