ML18022A192

Updated Final Safety Analysis Report (Ufsar), Amendment 27, 4.9 Table - Reactor Water Cleanup

ML18022A192
Person / Time
Site:	Browns Ferry
Issue date:	10/05/2017
From:	Tennessee Valley Authority
To:	Office of Nuclear Reactor Regulation
Shared Package
ML18018A778	List: ML18018A780 ML18018A781 ML18018A783 ML18018A784 ML18018A785 ML18018A787 ML18018A788 ML18018A790 ML18018A792 ML18018A793 ML18018A795 ML18018A796 ML18018A797 ML18018A798 ML18018A800 ML18018A801 ML18018A802 ML18018A804 ML18018A806 ML18018A807 ML18022A114 ML18022A115 ML18022A116 ML18022A117 ML18022A118 ML18022A119 ML18022A120 ML18022A121 ML18022A123 ML18022A124 ML18022A125 ML18022A127 ML18022A128 ML18022A129 ML18022A130 ML18022A131 ML18022A132 ML18022A133 ML18022A148 ML18022A155 ML18022A156 ML18022A157 ML18022A158 ML18022A159 ML18022A161 ML18022A162 ML18022A163 ML18022A164 ML18022A165 ML18022A166 ... further results
References
Download: ML18022A192 (1)

Text

BFN-23 TABLE 4.9-1 REACTOR WATER CLEANUP SYSTEM EQUIPMENT DESIGN DATA MAIN CLEANUP RECIRCULATION PUMPS Number Required:.............................. 2 Design Temperature (°F):................... 150 Capacity (each):............................. 50%

Design Pressure (psig):..................... 1300 Discharge Flow (gpm/pump):.......... 180 Discharge Head at Rated Flow (ft):..... 500 HEAT EXCHANGERS Regenerative Nonregenerative Reactor Coolant Flow Rate (lb/hr) 133,000/187,530*

133,000/187,530*

Shell Side Pressure (psig) 1,450 150 Shell Side Temperature (°F) 575 370 Tube Side Pressure (psig) 1,450 1,450 Tube Side Temperature (°F) 575 575 FILTER-DEMINERALIZERS Number Required:.................................... 2 Design Temperature (°F):.......... 150 Capacity (each):.................................. 50%

Design Pressure (psig):........... 1450 Flow Rate/Unit (lb/hr):........ 66,650/93,765*

Effluent Conductivity (mmho max):........ 0.1 Effluent pH:.................................. 6.5 to 7.5 Effluent Insolubles (ppb-measured as residue on 0.45 micron filter paper):.................................................. <10

• Lower mass flow rate corresponds to the maximum flow of 270 gpm. Higher mass flow rate corresponds to the maximum flow of 340 gpm. Operation of RWCU above 270 gpm depends upon the ability of RBCCW to accommodate the added heat load.