ML18018B321
| ML18018B321 | |
| Person / Time | |
|---|---|
| Site: | Nine Mile Point  |
| Issue date: | 01/18/2018 |
| From: | Niagara Mohawk Power Corp |
| To: | Office of Nuclear Reactor Regulation |
| References | |
| Download: ML18018B321 (18) | |
Text
STATE AND COUNTY USERS MANUAL FOR THE METEOROLOGICAL/RADIOLOGICALCOMPUTER SYSTEM.
TABLE OF CONTENTS PAGE TITLE How to Dial In How to Log In How to Generate Meteorological Reports How to Generate Meteorological Plot s How to Generate Class A Model Dispersion Reports Usernames and Passwords Help Telephone Numbers ATTACHMENT I Volume II Meteorological, Radiological Effluent an d Dose Reporting System (Model Formulation)
-1 June 1984
1 i
I
'\\
HOW TO DIAL IN 2.
Make sure power is applied to the Racal-Vadic Modems and the terminals (VT640 or GE Terminet 200) that,you wish to dial in on.
Place the Racal-Vadic Modem switches in the following positions:
a ~
b.
Co The The FA This is a spring loaded switch and will be in the correc t position.
HS Push back for 1200bps and pull forward for 300bps use.
meteorological computer will accept either bit rate
~
technical bit rate must match the modem bit rate.
DA/VO/HA place in the VO position.
3.
Dial the following telephone number:
315-349-2020 A tone will be heard.
4, On the Racal-Vadic
- Modem, move the DA/VO/HA switch from the VO to DA position.
The switch will remain in this position until the computer session is ended.
5.
6.
Follow the instructions given on the page titled "How to Log In".
Mhen the computer session is completed, log off by typing "0"
< CR and move the Raca1-Vad ic Modem DA/VO/HA switch from the DA to VO position.
7
~
Report any problems to the System Manager or Computer Department at Nine Mile Point (315-349-2470).
<CR
= Return Key
-2 June 1984
HOW TO LOG IN I.
VT640 (Video Display)
A.
Make sure power is applied to the VT640.
A flashing cursor will be in the upper left hand corner on the display if the power is on. If the cursor is not present, pull up on the switch located in the back of the VT640.
An audible tone will sound and the cursor will appear shortly.
B ~
Press the "Return" key.
The computer will respond as follows:
USERNAME:
PASS'WORD:
(Type in USERNAME) <cr>
(Type in PASSWORD) <cr>
"Welcome to the Niagara Mohawk VAX/VMS System" CD If "User Authorization Failure" is displayed on the
- VT640, an incorrect password or username has been entered'e-try Step B. If it appears
- again, see the System Manager or contact the Computer Department.
DE A menu will be displayed if all information is entered correctly.
Choose the information desired.
E.
To'log off, Type "0" <cr>
II F.
Report any problems to the System Manager or Computer Department.
II. TERMINET 200 KSR (Hardcopy)
A.
Make sure power is applied to the Terminet 200.
The "power on",
"motor on" and "ready" lights will be on steadily'f the "ready "
light is flashing or the "alarm" light is on, contact the Computer Department.
BE Press the "Return" key.
The computer will respond as follows:
USERNAME:
PASSWORD:
(Type in USERNAME) <cr>
(Type in PASSWORD) <cr>
"Welcome to the Niagara "1ohawk VAX/VMS System" CD If an incorrect username or password is entered a "user authorization failure" message will be printed'e-try Step BE If another failure
- occurs, see the System Manager or contact the Computer Department.
D.
A menu will be printed if all information is entered correctly
~
Choose the information desired.
E.
To log off type 0 <cr>
F.
Report anY problems to the System Manager or Computer Department CR >
= return key.
-3 June 1984
HOW TO GENERATE METEOROLOGICAL REPORTS A.
Log in to the system on a UT640 or Terminet 200 Printer (see "How to Log in" and "How to Dial In" Instructions)
~
B.
After the menu is displayed' Type "1" <cr>.
C-Type either "1"
<cr>
for viewing on UT640 or "2" <cr>
for a
hardcopy printout.
D ~
Choose the Meteorological Tower Site desired and <c>.
E.
Choose the Meteorological Parameter desired and <cr>.
F.
Repeat steps D
and E until all desired Meteorological Towers and parameters are chosen.
G
~
To obtain the Meteorological Reports Type "8" <cz>.-
H.
Enter the starting date of the reports in the correct format <cr>.
I.
Enter the ending date of the reports in the correct format <cr>
~
J.
The report(s) will be output to the chosen device in step c above.
K.
To log off type "0" <cr>.
L.
Report any problems to the System Manager or Computer Department.
<cr>
= return key.
-4 June 1984
0
HOW TO GENERATE METEOROLOGICAL PLOTS NOTE:
Meteorological plots must be generated on a UT640 Uideo Display
~
A.
Log in to the system on a VT640 (see "How To Log In" and "how to Dial In 'nstructions).
After the menu is displayed type "2" <cN
~
C.
Type either "1 'cO for single variable plot or "2" <cr>
for a double variable plot.
D ~
Choose the Meteorological Tower desired and <cN
~
E.
Choose the Meteorological parameter desired and <cr>.
F.
Choose the length of time the plot is to cover and <cr>
~
1 minute
= 61 minute plot 15 minute
= 15 hour1.736111e-4 days <br />0.00417 hours <br />2.480159e-5 weeks <br />5.7075e-6 months <br /> 15 minute plot 60 minute
= 73 hour8.449074e-4 days <br />0.0203 hours <br />1.207011e-4 weeks <br />2.77765e-5 months <br /> plot G-Enter the starting, ending or current date and <cr>
~
H.
The plot will output to the VT640 to return to the menu <cr>.
I.
To lo~ off type "0" <c r> ~
J.
Report any problems to the System Manager or Computer Department.
<cr>
= return key.
-5 June 1984
HOW TO GENERATE CLASS A MODEL DISPERSION REPORTS A.
Log into the system (see "How to Dial In" and "How to Log In" instructions)
~
8 ~
When the menu is displayed or printed Type "5"
<Cib'nter the two (2) letter abbreviation of the function desired and
<CR> ~
All options will work on the VT6400.
Only the following options wil work on the Terminet 200 printer:
l.
OF/OFF Site Rec 2 ~
ONION Site Rec 3.
TI/Arrival Time 4.
ME/i~1eteorological 5.
XX/EXIT D ~
Answer all questions relating to the function desired and
<Clo after answering each question.
NOTE:
In order to obtain "Actual" Radiological Data the Class A Model must already be running.
In order to obtain "Simulated" Radiological
- data, the "simulated" data files must have information in them.
If each of the above cases doesn't exist, the terminal will display or print "Specified Combination does not exist E
To log off type "XX" <Cfc.
The original menu will be displayed.
Type "0" <CK'.
F ~
Report any problems to the System Manager or Computer Department at Nine Mile Point.
<CR
= Return Key
-6 June 1954
USERNAiilES AND PASSWORD S NOTE:
Do "iot give
~an unauthorized persons the usernames and/or passwords and/or telephone number to this computer system.
This is confidential information.
The passwords will change at random time intervals to maintain system data integrity.
1.
The current username and password is listed below:
Username:
P asswora:
2 Report any problems to the System
>lanager or Computer Department at Nine iiile Point.
-7 June'1984
HELP TELEPHONE Nl&1BERS The following personnel will be able to assist you should computer system problems occur.
Any hardware problems with your equipment are your responsibility.
Expendable items such as printer paper and ribbons are a iso your responsibility.
System l1anager Jim Slater 315-349-2470 Technical Assistant Chris Bull 315-349-2468 Computer Department Supervisor Jim Meyers 315-349-285 1 Computer Department Technicians 315-349-2704 Meteorological Questions Roger Caiazza 315-428-661 2 Radiological Questions Pat Volza 315"349-2429 If you are experiencing or suspect hardware
- problems, we will be glad to assist or help you verify the problem over the telephone.
-8 June 1984
0