ML17251B092

From kanterella
Jump to navigation Jump to search
Application for Amend to License DPR-18,reflecting Replacement of Steam Generator Snubbers W/Rigid Structrual Supports
ML17251B092
Person / Time
Site: Ginna 
Issue date: 05/13/1988
From: Kober R
ROCHESTER GAS & ELECTRIC CORP.
To:
Shared Package
ML17251B091 List:
References
NUDOCS 8805200114
Download: ML17251B092 (3)


Text

UNITED STATES OF AMERICA NUCLEAR REGULATORY COMMISSION In the Matter Rochester Gas and Electric Corporation R.

E. Ginna Nuclear Power Plant

)

)

)

Docket No. 50-244

)

APPLICATION FOR AMENDMENT TO OPERATING LICENSE Pursuant to Section 50.90 of the regulations of the U.S.

Nuclear Regulatory Commission (the "Commission" ), Rochester Gas and Electric Corporation

("RG&E"), holder of Facility Operating License No. DPR-18, hereby requests that'he Technical Specifications set forth in Appendix A to that license be amended.

This request for a change in Technical Specifications is submitted to reflect replacement of steam generator snubbers with rigid structural supports.

The proposed technical specification change is set forth in Attachment A to this Application.

A safety evaluation is set forth in Attachment B.

This evaluation also demonstrates that the proposed change does not involve a significant change in the types or a significant increase in the amounts of effluents or any change in the authorized power level of the facility.

As demonstrated in Attachment B, the proposed change does not involve a significant hazards consideration.

88052001.1 4,.880513

,PQR ADOCK'05000244' DCD APL1.1

WHEREFORE, Applicant respectfully reauests that Appendix A to Facility Operating License No. DPR-18 be amended in the form attached hereto as Attachment A.

Rochester Gas and Electric Corporation By C

og W. Kober Senior Vice President Production and Engineering Subscribed and sworn to before me on this 13th day of May, 1988 LYNN[.HAUCK gttbyy Pubhc kt the State of New York MONROECOUNTY Comnission Espises Nov. 30, l9C9

ATTACHMENT A Revise the Technical Specification pages as follows:

Remove po 3 13 1

Insert po 3 13-1