ML16343A038

7 to Updated Final Safety Analysis Report, Chapter 11, Table 11.5-2

ML16343A038
Person / Time
Site:	Cook
Issue date:	10/24/2016
From:	Indiana Michigan Power Co
To:	Office of Nuclear Reactor Regulation
Shared Package
ML16336A263	List: AEP-NRC-2016-42, Fire Protection Program Change Summary ML16336A225 ML16336A228 ML16336A238 ML16336A291 ML16336A292 ML16336A294 ML16336A295 ML16336A297 ML16336A298 ML16336A299 ML16336A300 ML16336A301 ML16336A302 ML16336A303 ML16336A304 ML16336A305 ML16336A306 ML16336A308 ML16336A309 ML16336A310 ML16336A311 ML16336A312 ML16336A313 ML16336A314 ML16336A315 ML16336A316 ML16336A317 ML16336A318 ML16336A319 ML16336A320 ML16336A322 ML16336A323 ML16336A324 ML16336A325 ML16336A327 ML16336A328 ML16336A329 ML16336A330 ML16336A332 ML16336A333 ML16336A334 ML16336A336 ML16336A337 ML16336A338 ML16336A339 ML16336A340 ML16336A341 ML16336A342 ML16336A345 ... further results
References
AEP-NRC-2016-42
Download: ML16343A038 (2)

Text

INDIANA AND MICHIGAN POWER D. C. COOK NUCLEAR PLANT UPDATED FINAL SAFETY ANALYSIS REPORT Revision: 25.0 Table:

11.5-2 Page:

1 of 2 Last Revised: Revision 25.0 BLOWDOWN TREATMENT SYSTEM COMPONENTS PUMP Number 1 per unit Fluid Steam generator blowdown Pressure, Suction Atmospheric Temperature 200°F Head 125 ft.

Flow 60 gpm Type Horizontal centrifugal Material, Casing Stainless Steel Impeller Stainless Steel NPSH, minimum Ft. H2O 2.5 HEAT EXCHANGER1 Number 1 per unit Shell Side (blowdown liquid)

Inlet Temperature 200°F Outlet Temperature 120°F Max. pressure 70 psi Operating pressure 50 psi Flow 60 gpm Material 304 Stainless Steel Pressure drop, normal 4 psi maximum allowable 15 psi 1 The current plant design basis has been changed to reflect a new NESW pump discharge temperature of 88.9°F.

INDIANA AND MICHIGAN POWER D. C. COOK NUCLEAR PLANT UPDATED FINAL SAFETY ANALYSIS REPORT Revision: 25.0 Table:

11.5-2 Page:

2 of 2 Last Revised: Revision 25.0 BLOWDOWN TREATMENT SYSTEM COMPONENTS Tube Side (non-essential service water)

Inlet Temperature 76°F Outlet Temperature 106°F Max. pressure 150 psig Operating pressure 75 psig Flow 160 gpm Material 304 Stainless Steel Pressure drop, normal 5 psi maximum allowable 9 psi MIXED BED DEMINERALIZERS Number 3 per unit Type Flushable Vessel, design pressure, psig 200 Operating pressure, psig 50 Vessel, design temperature, °F 250 Operating temperature, °F 120 Resin volume, ft3 56 (Nos. 1 & 2) 20 (No. 3)

Design flow rate, gpm 50 Resin type Cation and anion Material of construction Austenitic stainless steel