ML16340A101

7 to Updated Final Safety Analysis Report, Chapter 4, Reactor Coolant Piping Design Parameters, Table 4.1-7

ML16340A101
Person / Time
Site:	Cook
Issue date:	10/24/2016
From:	Indiana Michigan Power Co
To:	Office of Nuclear Reactor Regulation
Shared Package
ML16336A263	List: AEP-NRC-2016-42, Fire Protection Program Change Summary ML16336A225 ML16336A228 ML16336A238 ML16336A291 ML16336A292 ML16336A294 ML16336A295 ML16336A297 ML16336A298 ML16336A299 ML16336A300 ML16336A301 ML16336A302 ML16336A303 ML16336A304 ML16336A305 ML16336A306 ML16336A308 ML16336A309 ML16336A310 ML16336A311 ML16336A312 ML16336A313 ML16336A314 ML16336A315 ML16336A316 ML16336A317 ML16336A318 ML16336A319 ML16336A320 ML16336A322 ML16336A323 ML16336A324 ML16336A325 ML16336A327 ML16336A328 ML16336A329 ML16336A330 ML16336A332 ML16336A333 ML16336A334 ML16336A336 ML16336A337 ML16336A338 ML16336A339 ML16336A340 ML16336A341 ML16336A342 ML16336A345 ... further results
References
AEP-NRC-2016-42
Download: ML16340A101 (1)

Text

IINNDDIIAANNAA AANNDD M MIICCHHIIGGAANN PPOOW WEERR DD.. CC.. CCOOOOKK NNUUCCLLEEAARR PPLLAANNTT UUPPDDAATTEEDD FFIINNAALL SSAAFFEETTYY AANNAALLYYSSIISS RREEPPOORRTT Revision:

17 Table:

4.1-7 Page:

1 of 1 REACTOR COOLANT PIPING DESIGN PARAMETERS Reactor inlet piping, ID, in 27.5 Reactor inlet piping, minimum1 thickness, in 2.56 Reactor outlet piping, ID, in 29 Reactor outlet piping, minimum1 thickness, in 2.69 Coolant pump suction piping, ID, in 31 Coolant pump suction piping, minimum1 thickness, in 2.88 Pressurizer surge line piping, ID, in 11.188 Pressurizer surge line piping, nominal thickness, in 1.406 Design pressure, psig 2485 Operating Pressure, psig 2085 (Unit 1)/2235 (Unit 2)

Hydrostatic test pressure (cold), psig 3106 Unit 1, 31072 Unit 2 Design temperature, ºF 650 Design temperature (pressurizer surge line)ºF 680 Design pressure, pressurizer relief line, psig 3

Design temperature, pressurizer relief lines, ºF 1

Water volume (all 4 loops without surge line), ft3 1185 Surge line volume, ft3 43 1 Original procurement minimums.

2 Original design.

3 From pressurizer to safety valve: 2485 psig, 650oF From safety valve to pressurizer relief tank: 500 psig, 470oF