Text

Attachment 2 - Ihi Southwest Inner Diameter Examination Data, Part 2 of 2
	ML15061A033
Person / Time
Site:	Summer
Issue date:	02/25/2015
From:	; South Carolina Electric & Gas Co
To:	; Office of Nuclear Reactor Regulation
Shared Package
ML15061A029	List: ML15061A031; ML15061A033; ML15061A034; ML15061A035; RC-15-0020, Attachment 2 - Ihi Southwest Inner Diameter Examination Data, Part 2 of 2; RC-15-0020, Attachment 3 - Final NDE Inspection Reports; RC-15-0020, Attachment 4 - First Inservice Inspection for Steam Generator a; RC-15-0020, Attachment 5 - Westinghouse LTR-PAFM-12-86 Flaw Tolerance Evaluation to Support Re-Categorization of V.C. Summer Unit 1 Steam Generator Nozzle to Safe End Dissimilar Metal Weld Inspection Requirements;
References
	CR-12-00556, RC-15-0020
	Download: ML15061A033 (85)
	v • d • e

LHi' IHI Southwest Technologies Examination Summary Record UHSot Caroin Bobi &laft: Virgil C. Sumner Nuclear S~tlon Urtt I1'Gas I.uftmg: R-21 ISunuaw"Shat No. 00200 Sy/stem: Steam Generator Una hrf. "AK SG Out N=z-l.SE I~ffcallon; 1-4100A-32 (DM)Not NE Callb__th__

Exam Slt 1 Method E CN Exembumzon h'eat NO%., No. NRI Ovletr hrks AUT ISwT-PDII-AUTlr2/1 UT Pnre I(e-mr) 110002 0-7 X UT TWO& AWY Elrm AUT ISwT-POI-AUT11r2/011 UTProbe 2 (M0-8I 110002 6-7 X LrT TWD &AWY Exam AUT ISWiT-POI-AUT 11i2RI Lrr 1 (6-) 110001 8-10 X -UTCW & CCW Exwn ALIT ISWiT-POI-AUT1I/2/0/1 LIT Probe 2(S0-881 110001 8- 10 X LIT CW & CCW ExWa AET ISwT-PDI-AET3f2IOID Er Probe I ET3.VCS-01 6-10 X Eddy Cwrnyt Exam AET ISwT-POI-AET3?2/0J0 ET Probe 2 ET0S-VCS.01 6-10 X Eddy Cuemnt EBarn Examination Summary: This weld was examined from the inside surface using SG-NExT, T4i1. & MS5800 examhation equipmenL The exambiaWion was ltrimted due to the proximity of the nozlJe taper. The examination coverage was 92%.No recrdable indicatons were detected during this examination.

PreparedBy-, SbvenjT~dd Signature:

,-Date:-CDtte: 81ganature; Date-,~ v~~

I I IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant:

V.C. Summer'Urnt

] Weld Identification:

1.4100A-32 (DM) ProiRev/Chp lCN: ISwT-PDI-AUTI 1/2/0/1 Examnation No.: ID-6 Project No.. 13-1107 Weld

Description:

SOA" Out No..to.SE (o0.15°) Device 136-00045 Mod.Conf.:

138-00102 Scan Path Drawing: 134-00121 Exam Date Examination Time Surface Tern arture OF Data Acquisition Operator (a) / SNT Level: Carlos H. Barberino/lIT 2-Apr-14 Start End Start Xnd 1805 1847 90 90 Scan Controller P2ri mers Increment Axis Planned Actual Stan Axis Planned Actual Positional Parameters Ctrobeler:

SG-N(oxT Lower Limit 71.30 71.60 Lower Limit 0D00 0.00 Beam Dircton: Twd/Aw0 Scan: X Rotator Drive Upper Limit 78.05 78.05 Uppe'r 1-imift 50.10 50.10 Probe Type: PA22-001 Increment:

Y Axial Drive Inc. (Resolution) 0.1!5 DCI (Scan Resolution) 0A 0 Scanning Speed: 2.0 inches per second Mode: Automatic Scan Conversion Units Inchecs Conversion Units Inches NumbeF of Scans: 46 Scan Motion: Bi-dkectional

-Radius In. 15.52" Weld CIL: 71.74" Correction:

NIA N/ElevAontNozzle CNL: NNA MsterAcquisition File: DM S Pipe_ID_90_AWY 270eraD_Skew.acq Cnlibration Records-.

Examinetion Notes: Probe Channel /AnCie(s)

Skew Scan Offset Step Offset Pipe Diameterna 31r03'Probe I 1 .60-g8%) 900 + 70.34(in)

-1.29(in) I 100D2 Circumferenoe

--97.48*Weld Cente1line

= 71.74 Probe 2 2-(60-88) 270 + 59.64(in)

-2.79(in) 110002 Rm Probe 3 3-(00Proffiometry) 00 + O.Do0inl)

-2.04(in) I110002 N/A N/A N/A N/A N/A NIA Increment

& Scan Positons Actual Recordable Indications Annie!t Remarks ScnN.() Increment Position SMa Position Yes No N/A

Attachment:

ScnNC) Sta Stop Starn Stop Channel I El S7 44 71.60 78,D5 0.00 50.10 Probe Chaonnel2 0 a] E] Q Yes No Chaninel 3 0- 0] El Further Evaluation Channel 1 r 0 Required: Probe 2 Channel 2 R] F]Channel 3 Q 0 D 0 Yes D No Channel 1 0 ay ID Archive Meadia Probe 3 Channel 2 ] [.Channel 3 1:1 0][] External Hard Drive Channel 1 11 El []Probe 4 Channe 12 M] C] [ ] CD-ROM Channel 3 [ * -[]DVO-ROM Analyst SNT Level /111/30 APR 2014 ISWT "ORM NJo. UTFD (Rev. III I

"))IHI IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SithePlant:

V.C. SumnmerUnit Weld identification:

I-4100A-32 DM) Pro/RevICh CN: ISwT-PDI-AVTI1/20/1 Examination No.: ID-7 Project No.: 13-1107 Weld Descriptloti Device Configuration:

136-00045 ModCona.t 138-00102 Scan Path Drawing: 134-00121 Exam Date Examination Time Surface Term raturt OF Data Acquisition O2eator (s) /SPIT Level Carlos R. Ba-rbrinnflT 2g-Apt- 14 Ss rt E)nd Sta0rt End Seae Controller Parameters Increment Axis Planned Actual Scan Ax00 Planned Actual Positional Parameters ControllerA SO-NExT Lower Limit 71.30 AN/ Lower Limit 48.47 4/.47 Beam Diretio: Twd/A Scan: X Rotator Drive Upper Limit 78.05 78.05 -Upper Limit 98.94 98.70 Probe Type; PA22-O01 Increment:

Y Axial Drive Inc. Interval (Resolution) 0,1!5 DC] (Scan Resolution)

D.A0 Scanning Speed: 2.0 inches per second Mode: Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans: 46 Scan Motion: Bi-direPional A Radius In. 15.52" Weld C/L: 71.74" Correction; NIA C/L, N/A Master Acquisition File: DMPIpeID 90 AWY 270_TWDSkew.acq Calibration Records: Examination Notes: Probe Channel/Anglees)

Skew Scan Offset Step Offset Pipe Diameter Dr31.03" Probe 1 ]-(60-88%)

90 + 70.34(in) -P1.29(in) 10002 Circumfe oeM 97.48" Weld Centeline

= 71.74 Probe 2 2-(60-88%L) 270 * + 59.64(in)

-2.79(in) 110002 E a i ai nR m r s Probe 3 3-(0-Pofilometry) 0° + 0.C(in) -2.04(in) 3 10002 N/A N/A -N/A N/A NIA N/A Increment

& guan Positions Actual Recordable Indications Aaalyst Remarks Scan No.(s) Increment Position Scan Position Yes No NIA

Attachment:

Start stop Sta/ e Stop Channel 1 0 1" /D 46 71.30 78.05 48.47 98.70 ProbeI Channel 2 0 [D 0 [] Yes M] No Channel 3 0] 1"0 0 Further Evaluation Channel 1 11 0 0: [ Required: Probe 2 Channel 2 13 2 n7 [Channel 3 0] 0] 10 Q Yes El No Channel 1 0] 0 0] [ Archive Media:3 Channel 2 0] -0 [Channel 3 r- -] ") 07 External Hard Drive Channel I rl 0 E Probe 4 Channel 2 M] 0 0][ CD-ROM Channel 3 [ [D DVD-ROM Jesse R. Delgado I II 130 APR 2014 -A {iswr rORM N.. trT9O (Res,. Iln)

,)IH I I1I SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Shc/Plant:

V.C. Sutemer Unit I Weld Identiflcatlon:

1-4100A-32 (DM) Pvi'Rev/Ch/JCN:

TSwT-PDI-AUTI 1/20/I Exainaion N.: ID-ProjectNo.:

1301107 Weld

Description:

SO-A"Ou4o0Z-S&(0`-125 Devie Cottflguration:

136-00045 Mod.Cant:

139-00102 Scan Path Drawing: 134-00121 Exam Date Eumination Time Surface TemreratureOF Data Acquisition Opmerator (s) I SN'T Level: Carlos H. Barberino/IT 29-Apr-14 Start End Sta rt End 1526 161-0 so s0 Sca conwoer P1 :%Increment Axis ln siRAJ Actual Rorae .an Axis PAnnned -Nswoal t Rm ar Ip detks Controller SG-NExT Lower Limit 71.30 ., 71.30 Lower Limit, 0.00 D.00 Beam Direction:

L'w/Cow Scan: X Rotator Drive Upper Limit 74.907.0 U,.jwr Limit 33.85 33.85 Probe Type: PA22-O01 Increment:

Y Axisr Drive Inc. Interval (Resolution) 0,05 DCI (Scan Resolution) 0.05 Scanning Speed: 1.5 inches per second Mode: Automatic Scan Conversion Units Inchles Conversion Units Inches Nurnber of SumBs: 71 Seen Motion: Bi-dire-ctional Radius In- 1 5.52", Weld CtL: 71.74" Coffectioix N/A Plevation/Nozzle C/L; NIA Master Acqubisiion File: DMPipe_ID 0 CW 180 CCWSkew.acq Calibration Records: Examination Notes-Probe Channel/lAnrle(s)

Skew Scan Offset Step Offset Pipe Diaeet3 = 31.03" Probe I 1-(60-880L) 00 + 27.77(in)

-2.04(in) 110001 Circumference

=97.48" WeCd Centedan = 71.74 Probe 2 2-60-8L) 1W + 3 7.21(in) -2.04(in) 110001 Rem NIA N/A NIA NIA NIA N/A NIA N/A N/A N/A N/A NIA Increment

& Scan Postflons Actual Recordable Indications Annilst Remarks Scan ND.(S) Increment Position Scan Position Yes No N/A Anachment:

Start Stop Start Stop Channel I1" 0 ID 1 71 71.30 74,80 0.O0 33.85 Probe I Channel 2 0- El [ 0- Yes [] No Channel 3 C3 C ] [] Further Evaluation Channel 1 0- 0"1 [ Required: Probe 2 Channel 2 R1 n ] [Channel 3 0 ' S -1 Yes No Channel I Q] [] [ Archive Media: Probe 3 Channel 2 Q] Q] E Channel 3 0 IDff [D External H&d Drive Channel I [ [IProbe 4 Channel 2 n] [ 17] [ CD-ROM Analyst / SNT Level / Date: Jesse RL Delgado ( f 30 APR 2014 -_ AX 19WT FORM No. VT 0 (RV,1IU!1)

)!IH I 1111 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant:

V.C. Summer Unit! Weld Identification:

1-4100A-32(DM)

Pro/Rev/ChwICN:

ISwT-PDI-AUTI/20/1I Examination No.: ID-9 Project No.: 13-1107 WekI Descrption:

tiO'-2.*-

Device Configuration:

136-00045 Mod.Conf.:

138-00102 Scan Path Drawing: 134-00121

-Exam Date Examination Time Surface Temperature OF Data Acquisition Operator (a)I SNT Level: Carlos H. Barberino/IT 28-Apr-14 Start End Start End 1615 1659 o0 80.... ... ... ._ _ _ _ _ _ _Scan ControllerParametets Jncrement Axis Planned Actual Scan Axis Panned Actual Positionul Parameters Controller:

SG-NExT Lower Limit 71.30 71.35 Lower Limit 32.50 32.50 Beam Direction:

Cw/Ccw Scan: X Rotator Drive Upper Limit 74.80 74.85 Upper Limit 66.34 66.34 Probe Type: PA22-001

Y Axial Drive Inc. Interval (Resolution) 0.05 DCI (Scan Resolution) 0.05 Scanning Speed: 1.5 inches per second Mode: Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans: 71 Scan Motion: i-directional Radius In. 15.52" Weld C/L: 71.74" Correction:

N/A _levation/Nozzle C/L: N/A Master Acquisition File: DMPipejDO0_CW_180_CCWSkew.acq Calibration Records- Examination Notes: Probe Channel /Angle(s)

Skew Scan Offset Step Offset Pipe Diamemr -3 1.03" Probe I 1-(60-88-L) 0" + 27.77(in)

-2.04(in) 110001 Circumference

= 97.48" Weld Centerline

= 71.74 Probe 2 2-(60-89-L) 1800 + 37.21(in)

-2.04(in) 110001 ExaminationRemarks-N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A_______ _______ -...<Daft Auans'W s .,_ ncrement & Sean Positions Actual Recordable Indications Analyst Remarks Scan No.(s) Increment Position Scan Position Yes No N/A Attachment Start Stop Stan Stop Channell 0 G 0/_71 71.35 74.85 32.50 66.34 Probe I Channel 2 0 0 0' Yes El No Channel 3 2 0 0 Further Evaluation Channel 1 0 0 Required: Probe 2 Channel2 [7 M, 0 Channel 3 [1 0 [D 0 Yes El No Channel 1 05 0 U] Archive Media: Probe 3 Channel2 [2 El [ 0 Channel 3 C0 0] D 0 External Hard Drive Channel ! 0 G1 Probe 4 Channel 2 l 0 0 [3 CD-ROM Chamibl 3 [] 0 2 DVD-ROM Analyst/ SNT Level / Date: A ISWTr FORM N. IrTT III1I V I I" I.I IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant:

V.C. Summer Unit I Weld ideatflcatlon:

1-4100A.32 (DM Pro/Rev/ChzqCN:

[SwT-PDI.AUTI 112J/0/l Examnation No.: ID-1 Project No.: 13-1107 Weld

Description:

S-OWVo0t"bs t*b'.363)

Device Cofign ration: 136-00045 Mod.Conm.

138.00102 Scan Path Drawing: 134-00121 Exam Date Examination Time Surface Tem rature OF Data Acquistion Operator (8) / SNT Level: Carlos H. BarberDnaeIT 28-Apr:- 4 Sturt End Start End 1703 1748 80 so JesstRJeAgaItionI/1 "P....Scan Controler Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller:

SO-NEXT Lower Limit 71.30 71.30 Lower Lin-it 65.00 65.00 Beam Direction:

Cw/Ccw Scan: X Rotator Drive Upper Licnit 74.8D0 74.85 Upper Limit 98.94 98.84 Probe Type: PA272-00l Increment:

Y Axial Driv Inc. Interval 0.05 DCI (Scan Resolution)

D.05 Scanning Speed: 1.5 inches per second Miode: Autoratic Scan Conversion Units Inches Conversion Units Inches Number of Scorns: 71lScan Motion: Bi-drectional Radius In. 15.52* Weld CIL: 71.74" Correction:

N/A -Ehavion/Nozzle CtL: NIA Master Acquisition F~ile; IDMPipe ]D 0 _CW 18D Calibration Records- Examination Notes.Probe Channel /Anzle(s)

Skew Scan Offset Step Offet Pipe Diametr =31.03" Probe I 1=(60-980L)

V -+ 27.77(in)

-2.04(in)

I ID0001 Circumfrence--97.49' Weld Centerline

= 71.74 Probe 2 2-(60-88 -L) 180 0 + 3 7 .2 1(in) .2,04(in) 110001 E a i ai n R m r B N/A N/A N/A N/A N/A N/A/AN/A N/A N/ANA N/A Increment

& Scan Positions Actual Recoidable Indications Annilst Remarks Sa os) Increment Position Scan Position Yes No 1N/A

Attachment:

SaN.() Stan T-stop Stan- Stop Chmmel I I- 72 71.30 74.85 65.00 98.94 Probe I Channel 2 0- C3[]~ Yes 27 No Channel 3 [] 0] [ Further Evaluation ChannelI ] [] [] Rquirel" Probe 2 Channel 2 El [Chmel 3 0] GD 0 Yes [D No Channel 1 0] 1I [ Archive Media;Probe 3 Channel 2 L1 07 [a Channel 3 D_, , 3 1p] External Hard Drive Channel I U: 0- El Probe 4 Channel 2 D] [] [ [:1 CD-ROM Channel 3 El ElI' DVD-ROM An" N Lve at:Juns R. Delgado I fit[ 30 APR 2014 Ow~rl Urn O(nw. 1/ll)

N ).I IHI-I IHI SOUTHWEST TECHNOLOGIES AUTOMATED EDDY CURRENT EXAMINATION RECORD Site/Planw:

VC SUMMER UNIT I Weld Identification:

I-4100A- DM) j , &4SI Pro/Rev/ChWJCN:

[SwT-AET-3/2/0 Examlnation No.: E'T-ID-06 Proect No.: 13-1107 Weld Descrlptlon:

IOutlet No -to-Safe End "A" Device Configration:

136-00045 Mod.Conf.:

138-00102 Scan Path Drawing: 134-00121 Exam Date Examination Time Surface Tern rature OC Data Acquisition Operator (s) I SNT Level: 28-Apr-14 Start End Start End WILLIAM ANGELL/ 11 1805 1847 70 70 Data Acquisition Scan Controiler Parameters Increment Axis Planned A tual Stan Axis Planned Actual Positional Parameters Controller:

ANT Lower Limit 71.30 71.30 Lower Limit 0.00 0.00 Beam Direction:

N/A Scan: X Upper Limit 78.05 78.05 Upper Limit 50.10 50.00 FT Probe Size: .38 (in)Increment:

Y Increment Interval 0.150 Resolution 0.020 Scanning Speed i.s ")SeC Mode: Automatic Scan Conversion Counts 16000 Conversion Counts 558.54 Number of Scans: 46 Scan Motion: Bi-dircctional Conversion Units Inches Conversion Units Inches Azimunth/NomleC/L 76.03*Correction:

N/A CIL N/A MSCdul) ParamSkwena Calibration Records: Exam ination Notes: Status (lhaSnel(s)

Skew Scan Offset Step Offset Ppe diameter=

31.03" Probe I On 1-2 + 22.5* 5.35" -2.2 1" ET-03-VCS-01 Circumference

= 97.480 Probe 2 On 3-4 -22.5 ° -5.35" -2,21" ET-03-VCS-01 W eld C /L- 76.03" Examination Remarks: Examination Remarks: Examination from 0 to 180*.Increment

& Scan Pouitioas Actual Recordable Indications AnalyI Rernark Sean No.(s) Increment Position Scan Position Yes No N/A

Attachment:

start Stop Start Stop Probe I Channel 1 0 F 0 -l Yes 0 No 46 71.30 78.05 0.00 50.00 Channel 2 0 2 D Further Evaluation Required: Probe 2 Channel 3 [1 0 0 Channel4 0 0l 1 -Yes [] No Probe 3 Channel 5 0 E) [j] Archive Media: Channel 6 0 E 0 E 0 I External Hard Drive Channel 7 []0 0 0 CD-ROM Probe 4 Channel 8 0 0 0 DVD-ROM Analyst / SNT Level / Date: WILLIAM ANGELL/ It/ -T /19Wr FRoM Me. ET IWO I Project No. 13-1107 EXAM ET-ID-06 Date: 28-April-2014 m-D wo *6 ýw sm D. Ow a UIWUBUSE-AimiSUP' I-iWl -h T (iTkuMi elE.4m.67 hi. s, I IHI SOUTHWEST TECHNOLOGIES AUTOMATED EDDY CURRENT EXAMINATION RECORD Site/PIaat:

VC SUMMER UNIT I Weld Identflcation:

1-4100A-( I Pro/Rev/CbluVCN:

ISwT-AET-3/2/O0 Exanaion No.: ET-ID-07 Project No.: 13-1107 Weld

Description:

jOutlet Noz.-to-Safe End "A" Device Conflgoration:

136-00045 Mod.Conf.:

13"-00102 Sea Path Drawing: 134-00121 Exam Date Exanminatlou Time Surfase Temperatare OC Data Acqlutition Operator (s) / SNT Level: 2b-Apt-14 Start End Start End WILLIAM ANGELL /11 1353 1935 70 70 Data Acquisition Scan Controller Parameters lcrement Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller:

ANTr Lower Limit 71.30 71.30 Lower Limit 48.47 48.47 Beam Direction; N/A Scan: X Upper Limit 78.05 78.05 Upper Limit 98.94 98.84 ET Probe Size: .38 (in)increment:

y Increment Interval 0.150 Resolution 0.020 Scanning Speed 13 *SEC Mode: Automatic Scan Conversion Counts 16000 Conversion Contls 559.54 Number of Scem: 46 Scan Motion: Bi-directional Conversion Units Inches Conversion Units Inches: AyimnturNozzle C/L 76.03*Ca/mion: NA __valow oule CIL NIA Module Parametera:

Calibration Records: ExamInation Notes: Status Channel(a)

Skew Scan Offset Step Oflfte Pipe dimneter -31.03" Probe 1 On 1-2 + 22.5* 5.35" -2.21" ET-03-VCS-01 Circumrence

= 97.480 Probe 2 On 3-4 -22.50 -5.35" -2.22" ET-03-VCS-01 Weld C/L= 76.03" Examination Remarks: Examination Remarks: Examination from 180 to 36V".Increment

&Scan Positions Actual Recordable Indleations Analyst Remarks Scan No.(s) Increment Position Scan Position Yes No NIA Attachment-S__n Start stop Start Stop Pre Channel I D [R 0 -Yes 0 No 46 71.30 78.05 48,47 98.84 Channel 2 0 0) 0 Further Evaluation Required: Probe 2 Channel 3 0 E 0 Chanel 4 1 9 0 0 QYes O No Probe 3 Channel 5 _ _ 0 e Archive Media: Channel 6 0 [0 2 0] Eernal Hiad Drive Proe 4. Channel 7 0 0 0[ 0 CD-ROM Channel 8 0 [0 9 DVD-ROM Analyst / SNT Level I Date: WILLIAM ANGELL I1 t/lswT Poem4 "k r lowU J Project No. 13-1107 EXAM ET-ID-07 Date: 28-April-2014-ft~ em "* we ~ "Waf 14 bm,,m L,,, u ,* Us... ._°" a DeTa pal Mmm X v lMJ21, I1 I IHI SOUTHWEST TECHNOLOGIES AUTOMATED EDDY CU NT EXAMINATION RECORD Site/Plant 1 VC SUMMER UNIT I Weld Identification:

1-4100A- (DM) -57. A,14Iu Pro/Rev/Chg/ICN:

1SwT-AET.3f2J0

..Examination No.: ST-ID-OS Project No.: 13-1107 Weld joutle= Noz.4o-Saft End 'A* Device Coufliguration:

1316-00045 ModCoat. 138-0102 Scan Path Drawing: 134-00121 Exam Date Examintion Time Surface Temperature oC Data Acquisition Operator (s) I SNT Level: 2-Apr4 Start End Start End WILLIAM ANGELL / I1 21526 1 610 70 70 Data Acquisition Scan Controller Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller:

ANT Lower Limit 71.30 71.30 Lower Limit 0.00 0.00 Beam Direction:

N/A Scan: X Upper Limit 74.80 74.80 Up pr Limit 33.85 33.85 ET Probe Size: .38 (in Increment:

Y Increment Interval 0.050 Resolution 0.020 Scanning Speed I s "iSe Mode: Automatic Scan Conversion Counts 16000 Convemsion Counts 559.54 Number of Scans: 71 scanMotion:

Bi-directional Conversion Units Inches Conversion Units Inches nOWun14oze C/L 76.03'Correcion:

N/A _____________________

_________

__ _______CIL W44 Module Parameters:

Calibration Records: Examination Notes: Status Channd(s)

Skew Scan Offset Step Ofset Pipe diameter -3__.03 Probe I On 1-2 + 22.' 5.35" -2.21" ET-03-VCS-01 Circumference

-97.49'Probe 2 On 3-4 -22.5' -5.35' -2,21' ET-03-VCS-01 Weld CIL- 76.031 Examlnatlon Remarla:______________Examination Remarks:__mianatinfrom 0 to 215W.inre-ment

& Scam Positions Actual Recordable lIdications Analyst Remarkb Scan No.(s) ncrement Position Scan Position Yes No N/A Attchmnen.

Stn Stop Start Stop Prbe I Channell D 0 Ds _-_ _ _ Yes 0_ No_71 71.30 74.80 0.00 33.85 Channel 2 0 0 D Further F.valuation Required: Probe 2 Chonne13 r-0 0.) 0_ Channel 4 0 0 01 0yes E) No Probe 3 Channel 5 0 0 0" Archive Media: Channel 6 [ 0 0 E0 External Hard Drive Probe 4 Channel 0 0 0 0J CD-ROM ChannelS 0 -0 DVD-ROM_Analyst / SNT Level / Dale: WILLIAM ANGELL /i II MWr MAN T#& ZT IMS r

)Project No. 13-1107 EXAM ET-ID-08 Date: 28-April-2014 mil ftl I* 4*E14 V* 42 E (145£1TH4.,I&4.e *8i~9j~S~jL' I.~ -~ jh~W ~cp J ....... .. pInnnnPn n w

.I 111 SOUTHWEST TECHNOLOGIES AUTOMATED EDDY CU NT EXAMINATION RECORD Sitemmt.:

VC SUMMER UNIT I iWeld Identification:

1-4100A-MX(DMYM-L A.T41* PCO/RCev/CkC:

lSwT-AET-320 Examlnation No.: ET-ID-09 Pro"ect No.: 13-4107 Weld

Description:

Outlet NWz.-o-Snfe Ed "A D Device Configuration:

136-00045 Mod.Coof.:

138-00102 Scan Path Drawing: 134-00121 Exam Date Examination Time Surface Temperature OC Daft Acquisition Operator (s) / SNT Level: 28A14 Start End Start End WILLIAM ANGELL / -pr-4 1615 1659 70 70 Data Acquisition Seta Controller Parameters Increment Axis Planned ctual Scan Axis Planned Actal Positional Parameters Contro~le.

ANT Lower Limit 71.30 7130 Lower Limit 32.50 32.50 ]Beam Direction:

N11 Scan- X Uppr Limit 74.80 74.80 Upper Limit 66.34 1 66.34 ET Probe Size: .38 (in Increment:

Y nc.mm ierval 0.050 Resolution 0.020 Scanning Speed 1.5 1'ms Mode: Aulmmnaic Scan Conversion Counts 16000 Conversion Counts 558.54 Number of Scans: 71 Scan Motion: Bi-directional Conversion Units Inches Convecion Units Inches jmiraltINozue C/L 76.03'Correction:

NIA _ _evm__o_/oz__e CL NO_/_Module Parameters:

Calibration Records: Examiaation Notes: Status Chamnel(s)

Skew Scan Offset Step Olfstt Pipe dienter -31.03" Probe I on 1-2 +22.50 5.35" -2.21" ET-03-VCS-O1

-97.48" Probe 2 On 3-4 -22.5' -5.35" -2.2 1 ET-03-VCS-01 Weld C/L- 76.03'Examination Remarks: Exarninaion Ratarb: Exanination from 120to 245'.IJcremunl

& Scan Positions Actual Recordable Indications Analyst Remarki;ScanNo.(s)

Incremnt Position Scan Position Yet No N/A AUchmernet

___Start Stop Start Stop Probe I Channell 0 .. Q1 0Yes 0 No 71 71.30 "74.80 32.50 66.34 Channel 2 0 0 0 Further Evaluation Required: Probe 2 Channel3 0- 2 0-Channel 4 0 0 07 D3[res E No Probe 3 Channel 5 0 D 0 Archive Media: Channell 0 Q 0 (0 External Hard Drive _Probe 4 Channel 7 0 10 1 0 CD-ROM Channel 8 fl 0 2 DVD-ROM Analyst / SNT Level /Datt: WILLIAM ANGELL/ III~5wT Foar me. gr it".Z Project No. 13-1107 EXAM ET-ID-9 Date: 28-Aprit-2014 tD MID Somas i W'S* 3 ý0404~4& P&iS _AI*h&tt ~- -__I I w

)TH I 1 1IM SOUTHWEST TECHNOLOGIES AUTOMATED EDDY CURRNT EXAMINATION RECORD Site/ant:

VC SUMMER UHIT I Weld Identiflcatlon 1-44100A-

,,"DM)-J+,'Li hc. t4 NProtRev/C1gflCN:

ISWT-AET-3a/0 Examlnation No.: ET-ID-1I Project ND,.: 13-IJ107 ......Wld Description-loulet Nmt4o-Sad'e End *A" [N:'l cc Confligr rdon,- 136-00045 Mod.Conr.:

13"00102 Sean Path Drawing; 134-00121 Jxam DNte Examination Time Surface Temperatare Cc Data Acquisition Operator ($) I SNT Level: Start End stna End WILLIAM ANGELL /Il 21-Ap-14 1703 1748 70 70 Data Acqusition Scan Controller Parameters Increment Axis Planned Actual Stan Axis Planned Actual Positional Parameters Controller:

ANT Lower Limit 71.30 71.30 Lower Limit 65.00 65.00 Buam Direction:

NWA Scan: X Up Limit 74.80 74.80 Uppcr Limit 98.94 98.84 ET Probe Size: 39 (in Incrtment:

Y Increment Interval 0.050 Resolumion 0.020 Scanning Speed I, "/SEC Mode: Automatic Scan Conversion Counts 16000 Conversion Counts 558.54 Number of Scans: 71 Scan Motion: Bi-directional Conversion Units Inches Conversion Units Inches AzimunlWNoule CVl, 76.03'COrrection:

N/A _levasiow*lzue V1 WA Module Parameters:

Calibration Records: Euxmt.. non Noter.Status Channel(s)

Skew Scan Offset Step Offset Pipe diameter = 31.03" Probe I On 1-2 + 22.5" 5.35" -2.21' ET-03-VCS-01 Cireumference-97.4r" Probe 2 On 3-4 -22,5' -.-2.2 V ET-03-VCS-0I Weld C/L- 76.03" Euminatlon Remarks:_Examination Remarks: I Exanmiation from 240 to 365".incremaet

& Scan Positions Actual Recordable Indications Analyst Remarks Scan lo.(s) Increment Position Scan Position Yes No NIA Attachment-Strat Stop Start Stop Prob I Channel 1 01 [a 0 R Yes 0 7 No 71 71.30 74.80 65.00 98.84 Channel 2 0 0B 0 Further (aluation Required: Probe 2 Channel 3 0 U 0 __Channel 4 0 (a 01 Oes 1 No Probe 3 Channel 5 [ Q 0 Archive Media: Channel8 0 0 0 021 External Hard Drive Probe 4 Channel7 0 [] 0 C] CD-ROM Channel 8 0 I 9 DVD-ROM Analyst I SNT Level / Date;WILLIAM ANGELL/ III I5W? FOAM Ný er Mau

)Project No. 13-1107 EXAM ET-ID-10 Date: 28-Apnil-2014 I:,Wnn, *#

N S o...-ET41 E T'1O" 97 i-Lf, l-m iv (T... .. .i ... ...*; ; ::

IHI IH1 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant:

V.C. SumnArUniti IWeld Identification:

1-4200A-28 (DM) ProtRev/ChR/ICN:

ISwT-PDI.AUT I 1/2/0I Examinatin No.: ID- Il Project No.: 13-1107 Weld

Description:

S.08" In No-t0-SP (0o-183*s Device Conflguration:

136-00045 Mod.Conf.:

138-00102 Scan Path Drawing: 134-00121 Exam Date Examination Time Surface Temperature OF Date Acquisition Operator (s)/SNT Level: Rihard A. Riddkw III 27-Apr-14 Start End Start End 2115 2150 1 80 80 Scan Controller Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller SO-NExT Lower Limit 71.30 71.52 Lower Limit 0.00 0.00 Beam Direction:

Twd/Awy Scan: X Rotator Drive Upper Limit 78.05 78.02 Upper Limit 50.10 5 $0.03 Probe Typo: PA22-001 Increment:

Y Axial Drive Inc. Interval (Resolution) 0.15 DC1 (Scan Resolution) 0.10 Scanning Speed: 2.0 inchcs per second Mode: Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans: 46 Scan Motion: Bi-directiomal Radius In. 15.52" Weld CA,: 71.74" Correction:

NIA I _ JevalionNozzle CIL: N/A Mister Acquisition File: DMPipeD 90_AWY_270_TWDSkew.acq Calibration Record: Examination Notes: Probe Channel /Angue(s)

Skew Scan Offset Step Offset Pipe Diameter = 31 .03" Probe 1 I-(60-88-L) 90W + 70.34(in)

-1.29(in) 110002 Circumference

= 97.48" Weld Centerline

= 71.74 Probe 2 2-(60-88-L) 270" + 59.64(in)

-- 2179(in) 110002 Examination Remarks: Probe3 3-(OProfilometry) 00 4 0.00(in) -2.04(in) 110002 N/A N/A N/A N/A NIA N/A Increment

& Scan Positions Actual Recordable Indications Anal'st Remarks Scan No(s) Increment Position Scan Position Yes No N/A Anachmnent:

Stani I Stop Start Stop Channel I 0 ED El 45 71.52 78.02 0.00 50.03 Probe I Channel 2 0 G D 0 Yes [D No Channel 3 13 0 0 Further Evaluation Channel I Q 0 01 Required:.

Probe 2 ChanelI2 Fl e El_Channel 3 Q 0 02) 0 Yes El No Chanmel 1 0 0 B Archive Media: Probe 3 Channel? [] 0 ED Channel 3 ] 0 0 [ External Hard Drive Channel I [I3 S]Probe 4 Channel 2 17 0 0 CD-ROM Channel 3 C ] DVD-ROM Analyst I SNT Level / Date: Jesse R Delgado I IlI 3 APR 2014 ISW" FORM No. Ltrrs (Rev. IIll)

IHI IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant:

V.C, Summer Unit I Weld Identification:

1-4200A-28 (DM) Pro1Rev/Chje/CN:

ISwT-PDI-AUTI 1/2/0/1 Examination No: ID-12 Project No.- 13-1107 Weld

Description:

scOB"inx l o-se (ISO .365-) Device Confitguration:

13"00045 Md.CCoaf.:

13"10002 IScan Path Drawing: 134-00121 Exam Date Examination Time Surface Temperature OF Data Acquisition Operator (s) / SNT Level Richard A. Riddles! III 27-ApT-14 St start End+200 2239 80 , 80--Dai*Ac "Uiktefni Stan CintrtotUa Parsnreten Increment Axis Planned AedaT Kan Axis Planned Actual ositiodnal PPm emters Controller.

SO-NExT Lower Limit 71.30 71.57 Lower Limit 48.47 48.47 Beam Directon:

Twd/Awy Scan: X Rotator Drive Upper Limit 78.05 78.05 Upper Limit 98.84 98.84 Probe Type: PA22-O01 Inntment, YAxial Drive Inc. Interval (Resolution) 0.15 DCI (Scan Resolution) 0.10 Scanning Speed: 2.0 inches per second Mode: Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans: 46 Scan Motion: Bi-directional Radius In. }5.52" Weld C/L: 71.74" Correction:

NIA _EicvationfNo'zale C/L: N/A MasterAcquLsition File: DM Pipej D 90 AWY 270TWD_.Skew.acq Calibration Records: Examination Notes: Probe Channel /Angle(s)

Skew Scan Offset Step Offset _Pipe Diameter=

31.03*Probe I 1-(60-8rL) 9( + 70.34(in)

-1.29(in) 110002 Circumference

= 97.48" Weld Centerline

= 71.74 Probe 2 2-(60-88'L) 2700 + 59.64(in)

-2.79(in) 110002 Examination Remarks: Probe 3 3-(0'Profilom~ety) 00 + 0.00(in) -2.04(in) 110002 N/A NfA N/A N/A N/A N/A&. Sca ... Dm -o, --ysi ,- ..Incremmn & Scan Positions Actual Recordable Indications Analyst Remarks Scan No.(s) lncrement Position Scan Position Yes No N/A

Attachment:

Stagt Stop Sta Stop Channell 0 0 11 44 71.57 78.05 48.47 98.84 Probe I Charnel 2 0 D ] 00 Yes [D No Channel 3 ] 0 0 Further Evaluation Channel1 0 E0 I equired: Probe 2 Channel 2 E] 07 [71 Channel 3 0 0 0 ] Yes 0 No Channel 1 0 0 0 Archive Media: Probe 3 Channel 2 C1 .0 Channel 3 C] 0 0 [0 External i-Hard Drive__ __ __ _ __ __ _ __ __ _Channel 1 0 0 ID Probe 4 Channel 2, 1 n 0 0 CD-ROM Channel 3 C] E 0 DVD-ROMI SNT Level / Date: Jesse IL Delgado 111 30 APR 2014 .--A" FORM No. )Trs (Kr'. 111i)

)IHI IHI SOUTHWEST TECHNOLOGIES

.oI .--. -- " AUTOMATED ULTRASONIC EXAMINATION RECORD Sitel/Phat; V.C. Summer Unitl Weld Identification:

14200A-28 (DM) ProiRev/Chg/IlCN:

ISw'T-PDI-AUTI IVn l Examination No.: ID-13 Project No.: 13-1107 Wed Descptlion:

SG"B-InN.,oO-Sz (o-i22 Device Conf'lurstlon' 136-00045 Mod.Conf.:

T38-00102 Scan Path Drawinl: 134-00121 Exam Date Examination Time Surface Tem eratureOF Data Acquisition Operator (s) /SNT Level: Richar A. Riddles/III 28-Apr-14 Start End Start End 0046 0135 80 80 4, unFto ivUA__IEi

... ..., ..--.Scan Cnatroller Parameters Increment Axls Planned Actital Scan Axis Planned Actual Positional Parameters Controlle':

SO-NExT Lower Limit 71.30 71.32 Lower Limit 0.00 0.00 Beam Direction:

Cw/Ccw Scan: X Rotator Drive Uper Limit 74.80 74.80 Upper Limit 33.85 33.85 Probe Type: PA22-001 hienc'rena Y Axial Drive Inc. lntcrval (Resolution) 0.05 DCI (Scan Resolution) 0.05 Scanning Speed: 1.5 inches per sveond Mode: Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans: 71 Scan Motion: Bi-directional Radius In, 15.52" Weld C/L: 71.74" Correction:

N/A _ I Ellevation/Nczzle CIL: N/A Master Acquisition File: DMjPipe lD30,CW_180_CCW_Skew.acq Calibration Revords: Examination Notes: Probe Channel/Angle(s)

Skew Scan Offset Step Offet Pipe Diameter 31 03" Probe I I(60-880L) 00 + 27.77(n) -2.04(in) 110001 Circumference=

97.48'Weld Centerline

= 71.74 Probe 2 2-(60-88-L)

)801 + 37.21(in)

-2.04(in).

110001 Examination Remarks: N/A N/A N/A N/A N/A N/A N/A N/A NIA N/A N/A N/A' ' ~~~~~~~~~~

~ ~ ~~.... ':i:.-:-..

..........................

' =

.... "': .." ..Increment

& Scan Positions Actual "ecord babe Wnia lo w AnIIl sol Remark.Increment Position Scan Position Yes No N/A

Attachment:

Sn No.(s) Start Stop Stan Stop Channel 0 Q el __69 71.32 74.80 0.00 33,85 Probe I Channel 2 0 B 0 0 Yes 2 No Channel 3 0 1 1 Further Evaluation

.. Channel 1 0 0 LI Required: Probe 2 Channel 2 n -[7 Channel3 0 Q El 0 Yes a No Channel I 0 0 ED Archive Media: Probe 3 Channel 2 E3 a] _ _Channel 3 G a] [ 0 Externa) Hard Drive Channel 1 0 0D Probe 4 ChannelZ nl El I 0 CD-ROM I Channel 3 Q 3 0 [F DVD-ROM Analyst / SNT Level I Date. Jess R. Delgado, 1DI 30 APR 2014 ..4 t#I&M No. ULT 50 (we. 111)

IHI IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SitriPlant:

V.C SummerUnil I Weld Identifkiatlon:

1-4200A-28 (DM) Pro/Rev/Chy/ICN:

ISwT-PDI-AIITI I/2/0/ Examinatlon No.: ID-!4 Protect No.- 13-1107 Weld

Description:

SO" InNwzvto-Si 12V.24S$)

Device Configuration:

136.00045 Mod.Conf.r 138-00102 Scan Path Drawing: 134-D0121 Exam Date Examination Time Surface Temperature OF Data Acquisition Operator (s) /SNT Level: Richard A. Riddles/ III 28-Apr-14 Start End Start End 0145 0245. .0 80 San cr n & ScParameters P ou-Aement Axis Planned Aclte Scan Axi Piano Actual Ptsetional Parameter&

Controller.

SO-N&xT L.ower Limit 71.30 71,32 Lower Limit 32.50 32.50 Be=' Directon:

C'w/Ccw SCan: X Rotator Drive Upper Limit 74.80 74,80 Upper Limit 66.34 66.34 Probe Type: PA22-001 Increment:

Y Axial Drive Inc IntervSa (Resolution) 0.05 DO (Scan Resolution) 0.05 Ncanning Speed: 1.5 inches per second Mode: Automatic Scan Conversion Units Inches Conversion Units Inches N)umber of Scans: 71 Scan Motion: Bi-drectonal Radius In. 15.52" Weld C/L: 71.74" Correwcion:

N/A 'E~vation/Nozzle CIL.: NIA Master Acquisition File: DMPipe_ID 0-CW-180 CCWSkcw.acq Calffratlon Records: Examination Notes: Probe Channel/Anle(s)

Skew Scan Ofset Stbp Offset Pipe Diame3ern 31.03" Probe I 1-(60-8-L) 0 C 27.77(in) -a2.04(in) 110001 Circumference r97.48" Weld CeCeteine

= 71.74 Probe 2 2-(60-880L) 1e0* + 37.21(in)

Cn 2.0400) 110001 Examination Remarks: NIA NIA N/A NIA N/A N/A N/A N/A N/A NtA NIA N/A Incerment

& Semi) Positions Actual Recordlable Indications Analyst Remar~ks Su o() Increment Position Scan Position yes No N/A Attacmen~t:

SSan Stop Start stop Channel 3 13 0 [CV-O 71 71.32 74.80 0145 D245 probe I Channtel 2 [3 El 0" 0" Yes No Channel 3 11 E- e] Further Evaluation Channel I ES DL D Required: Probe 2 Channel 2- i 0 3"0 AP 0.Channel 3 Q o] (] y.es 1 N Channe 1 0 0 [ a[ Archive Media: Probe 3 Channel 2 El 11 [Channel 3 1 11 [] (D External Hard Drive Channel I Q] Q ID probe 4 Channel 2 rl" ] 9] 0" CD-ROM rChannel 3 [1 0] G1 DVV-ROM Analyst/ SNT Level I Date -J esse R. Delgado /ITT 30 APR 2014 _._ IsyWT FORM~o Xf'l U- s (111. [III)

IHI IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant:

V.C. Summern Unit I Weld Identification.

1-4200A-2 (DM) Pro/RevICh/ICN:

ISwT-PDI-AIJTI 1/2/0/I Examination No.: ID-15 Project No., 13-1107 Weld Descri tion: SO "B" In N.z-.toSE 240'-36s5° Device Confl uration: 136-00045 Mod.Conf.:

138-00102 Scan Path Drawing: 134-001il Exam Date Examination Time Surface Temperture 0 F Deata Acquisition Operator (s) /SNT Level: Richard A. Riddles / I I I 28-Apr-I 4 Start End Start End 0247 0333 so (0 Scan Controller Parameters Increment Axis Planned Actual Scan Axs Planne Actual Positional Parameters Controller:

SO-NExT Lower Limit 71.30 71.30 Lower Limit 65.00!! 65.00 Beam Direction:

Cw/Ccw Scan: X Rotator Drive iUpWe Limit 74.90 74-.80 Upper Limit 98.84 1 98.84 Probe Type: PA22-001 Increment:

Y Axial Drive Inc. Interval (Resolution) 0.05 DCI (Scan Resolution) 0.05 Scanning Speed: 1.S inches per second Mode: Automatic Scan Conversion Units i~nches Conversion Units Inches Number of Scans: 71 Sewn Motion: Bi-diroctionel Radius In. l 5.52" Weld C/L; 71.74" correction:

N/A NA/eANAion/Nozzl.

C/L N/A MisfterAcquisition File: DM PipejlD 0 CW_180 CCW Skew.acq Calibration Records; Examination Notes.Probe Chan nel/A ngle(s) Skew Scan Offset Step Offset Pipe Diamnete 31.03" Probe I ! -(6-88°L) 00 + 27.77(in)

-2.04(in) 1 10001 Circumference

.97.48" Weld Centerline

=f 71.74 Probe 2 2-(60-88°L)

I SD* 4 37.21 (in) -2.04(in)

I I ODD] Examination Remarks: NIA N/A N/A N/A N/A N/A N/A NIA N/A N/A N/A N/A Increment

& Scan Positions Actual Recordable tndications Analst Remarks Increment Position Scan Position Yes No NIA

Attachment:

SaNoi) Stan stop Star stop Channel I1" 0 -M 71 71.30 74.80 65.00 98.84 Probe I Channel 2 [] .1 El.[] Yes E) No Channel 3 -. E " Furthe Evaludtion Channel 1 0 Q Required: Probe 2 Channel 2 17CD-ROM ChannelJ3

[] 0 ID 0Yes E) No Channel 1 [] 2 Archive Media: Probe 3 ChannelJ 2 Q7 E)Channel 3 C. I-' EDI External Hard Drive Channel 1 0] 0] P Probe 4 Channel 2 n C} [ CD-ROM Channel 3 ) 0 DVD-ROM Analyst / SNT Level / Date: Jesse R. Delgado /11 30 APR 2014 UWT FORMI No UT5 (Rev. W13)

IRI SOUTHWEST TECHNOLOGIES AUTOMATED EDDY CURRENT EXAMINATION RECORD Site/P lant ., VC SUM M ER UN IT l W eld Identifica flon A x "' A -A'(D M ) 1 -4 = -2 %r ProfR ev/C h w/IC N : ISw T-A ST-3/2/0 ' x m n t o o :E --Project No.: 13-1107 Weld

Description:

lnlet Noz._-o-Safc End *B" Device Conalluratlon:

136-00045 E Mod:Conf.:

138-00102 jSan Path Drawing: 134-00121 Exam Date I Examination Time Surface Tern eratre 0 C Data Acquisition Operator (9) I SNT Level: Start End Start End KARL SCHAFFER / 111 27-Apr- 2115 2150 68 68 Data Acquisition Scan Controller Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positional Parameterm Controller:

ANT Lowcr Limit 71.30 71.30 Lower Limb 0.00 0.00 Beam Direction:

N/A Scan: X Upper Limit 78.05 78.05 Uppcr Limit 33.85 33.85 ET Probe Size: .38 (in'Increment:

Y Increment Interval 0.150 Resolution 0.020 Scanning Speed 1.5 "/SEe Mode: Automatic Scan Conversion Counts 16000 Conversion Counts 558.54 Number of Scans: 46 Scan Motion: Bi-directional Conversion Units Inches Convetion Units Inches Aimunth/Noel CI. 76.03'Corrcction:

N/A "j ,rionr/Nulee C/L N/A Module Parameters:_

Calibration Records: Examination Notes: Status Channel(s)

Skew Scan Offset Stlp Offset Pipe diameter = 31.03" Probe I On 1-2 +22.5* 5.3." -2.21" *ET-03-VCS-01 Circumference

= 97.48" Probe 2 On 3-4 -22.50 -5.35" -2.21" ET-03-VCS-01 Weld C/L= 76.03" Examination Remarks: Examination Remarks: Examination from 0 to Ig00o Increment

& Saan Positions Actual Recordable Indications "Analyst Remarks Scan No.(s) Incement Position Scan Position Yes No N/A

Attachment:

_Start Stop Start Stop- Pobe I Channell 0 0 O]es 0 No 46 71.30 78.05 0.00 33.85 -Channel 2 0 0 0 Further Evaluation Required: Probe2 ChanneJ3 0 0 0] [Channel4 0D 0 0 QYes 0 No Prob3 Channel5 D 0 [0) Aechive Media: Channel6 0 0 1-1 External Hard Drive Probe 4 Chmnnel 7 0 0 ) E [ CD-ROM Channel 8 C) 0 0 DVD-ROM Analyst / SNT L~evel / Dale: WILLIAM ANGELL / 11 /4Z LSrFORKM ft, lrT lO./

Project No. 13-1107 EXAM ET-ID-1 1 Date: 28-April-2014 WW flitlil I" o m!A." ,

__I~ *a*'.*Le .f A- I U406"s

)111H SOUTHWEST TECHNOLOGIES AUTOMAT EDDY CURRENT EXAMINATION RECORD qatJlllant:

VC SUMMER UNIT I Weld

--(DM) %-47A0A--.

Pro/Rev/CMICN:

lSwT-AET-312/0 Examnaton No.- ET-ID-12 Projcet No.: 13-1107 Weld

Description:

Inlit No0.4o-Safe End '"B Devle Coufnguraflon:

136-00045 Maod.Conf.:

38-00102 SCaN Path DrawinL: 134-00121 Exam Date Examination Time Surface TemperSture C Data Acqluitlom Operator (s)/SNT Level: 27oAI-I4 Start220 End Start End KARL SCHFFER/ 1112-A~rI 2200 2239 68 68 Data Acquisition Scan Controller Parameters Increment Axis Planned Aetal Scan Axis Planned Actual Parameters ntroller ANT Lower Limit 71.30 71.30 Lower Limi 45.47 5.47 Beam Direction:

N/1 Sum: X Upper Limit 78.05 78.05 Upper Limit 98.84 98.64 ET Probe Size: .38 (in Incne nt: Y Increment Interval 0.150 Resoluton 0.020 SScanning Speed is/3B Mode: Automatic Scan Counts 16000 Conversion Counts 558.54 Number of Scans: 46 Scan Motion: Bi-directional Conversion Units Inches Conversion Units inches Aztmunlh/Norzle C/L 76.03'Corrction:

N/A JElevati"onoNOae C/L. NOl Module Parameters:

Calibration Records: Examinlaton Notes: Status Channel()

Skew Sea Offset Step Oft__ Pipe diamter -31.03 Probe I On 1-2 + 22.5" 5.35" -2'11 ET-03-VCS-01 Cirunufmtbnce

-97.490 Probe 2 On 3-4 -_22_S_ -5.35" -2.21" ET-03-VCS-01 Weld CL- 76.030_xAminadion Remarks: Exanination Remarks: Examination from 180 t Me0,........ iacremunt

& sa. PosJwtio Actual Recordable Indlcations Analyst Remarks Scan .(s) I t Position Scan Position Yes No N/A Attachunenv

__an Start Stop Stin Slop Channell 0 a] 0 "'es 0 No 46 71.30 78.05 45.47 98,84 Channel 2 0 0 0- Further Evaluation Requirod: Pobc2 Channel3 0 ( 1D Charne4i 0 01 0 OEres 01 No Probe 3 Channel 5 0 0 (a Archive Media:.Channel 6 0 0 0 0 External Herd Drive Channel?7

-0 0 CD-ROM__Channel 8 0 I 0 DVD-ROM WILLIAM ANGELL/ II1 Iswr VoaM NO, Irr own 1 Project No. 13-1107 EXAM ET-10-12 Date: 28-April-2014 jumod**' .~P9UV: 4 i F=llwnI t e b! = b-,L -....1: )t.14411v.

[f IHI SOUTHWEST TECHNOLOGIES AUTOMA'ED EDDY CURRENT EXAMINATION RECORD Site/Plaint

-VC SUMMER~ urrr 1 IWekld Iestftfestlom 1j-4 am.3a (DM) J -t a'tq-2S( Pro/RWvCbuJICN:

ISWT-AET-3/2M0~la o: I-DI Project No.: 13- 1107 Weld

Description:

-Iniet NoL-to-Ssfe End "B" Device Configuration:

136-00045 n Mod.Cotf.:

138-00102 .Scan Path Drawing: 134-00121 Exam Date Examination Time Surface Temperature OC Data Acquisition Operator (a) / SNT Level: Start End Start End KARL SCHAFFER]

ITT 28-Apr-14 0046 9135 68 65 Data Acquisition Scam Controller Parameters Increment Axis Planued Actual San Axis Planned Actual Positional Parameters Controller ANT Lower Limit 71.30 .71.30 Lower Limit 0.00 0.00 Beam Diredion:

NI, Scan: X Upper Limit 74.80 7480 -Upper Limit 33.35 33.85 JET Probe Size. .38 (ir Incremenr Y Increment Interval 0.050 Resolution 0.020 Scanning Speed ILs "/SE Mode: Automatic Scan Comvctsion Counts 16000 Conversion Cotas 558.54 Nwmrbv of Scars: 71 Scan Motion: si-dircctional Conversion Units Inches Conversion Units Inches IAzmunsWNoWe C/L 76.03 Correction:

N/A ElevutionNozzle C/L NI, Module Parameters:

Calibration Records: Examluation Notes: Status Cbaonetj(S)

Skew Sean Offset Step Offset Pipe diameter -31.03" Probe IOon 1-2 +22.5" 5.36" -2.21" ET-03-VCS-01 Circumference 97.48 Probe 2 On 3-4 -22,5" -5.35" -2.21" ET-03-VCS-01 Weld CIL- 76.03" Examination Remarks: Examination Remarks: Examination from 0 to 125".lunrement

& Scan Positions Actual Recordable indications

"_AnalystRemarks Scan No.(s) increment Position Scan Position Yes No NIA

Attachment:

Stan Stop Stan Stop Probe I Channel 1 0 1 0 Or'es 0 No 71 71.30 74.30 0.00 33.5 Channel 2 0 a) 0 Flher Evaluation Required: Probe 2 Channel 3 0 0[]_ Channel4 0 121 03 GNo,, Probe3 Channel5 03 0 1] ArchiveMedia:

Channel 6 0 0 [ a External Hard Drive Probe 4 Channell 0 0 0 03 CD-ROM ChanneIB 0 -[ 0 DVD-ROM Analyst / SIVT Level / Date: WILLIAM ANGELL/ I[ I ISVVTIFOQM ft rr 1001 t-Project No. 13-1107 EXAM ET-ID-13 Date: 28-April-2014-ii _ .! .i ET1-10 jIun1t ufe4m M.Iý rod X 4WASI k N)I1 1SOUTHWEST TECHNOLOGIES AUTOMA ID EDDY CURRENT EXAMINATION RECORD SttePlantt VC SUMMER UNIT I 1Wted identiflcatlo:n-A 441We9 (DM) I-92?Cn-r

& Pro/R/CbCJWICN:

ISwT-AET-3/2/0 Exaination No.: ET-ID-14 P roject No.: 13-1107 [W eld DesJcriptin:

frkk3 N or-to-Saft End *B" Devict Confl prefimn: 136-00045E a in io , T-D 4 Mod.Conf,:

133-00102 Scan Path Drawin 134-00121

&xaM Dale Examination Time SurfaceTemrpehalre OC Data Acquisition Operator (s) / SNT Level: 2-Apt-14 Start End Start End KARL SCHAFFER/

111 0145 1 0245 _.68 68 Data Acquistion_

Scan Controller Parameters increment Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller:

ANT Lower Limit 71.30 71.30 Lower Limit 32.50 32.50 Beam Direction:

N11 Scan: X Upper Limit 74.80 74.80 Upper Limit 66.34 66.34 ET Probe Size: .38 (in Incremeit:

Y Increment Interval 0.050 Resolution 0.020 Scanning Speed 1.5 "SBL Mode: Automatic Scan Conversion Counts 16000 Conversion Counts 558.54 Number ofScans: 71 Scan Motion: Bi-directional Conversion Units Inches Conversion Units Inches Jdmunth/Nozle C/L 76.03 Correction:

N/A J v____ _ CIL N11 Module Parameters:

Calibration Records: Examination Notes: Status Channelua Skew Scan Offset Step Offset Pipe diameter -31.03" Probe I On 1-2 + 22.5? 5.35" -2.2 1 *ET-03-VCS-0I Circurnf'broe

-97.48'Probe 2 n 3-4 -5,2 -5,35 -2.21' ET-03-VCS-01 Weld C(L- 76.03" Examliation Remarks: Examination Rernaks: Examination from 120 to 744*" Icremeat & Scan Posiuto Aalcl ....ebale Indications Analyst Remarks Sw N.(s) Incrcmeat Position Scan Position Yes No WA

Attachment:

S_ __ Start Slp. Start Stop Probe I Channell D Q 0 OYes 0 No 71 71.30 74.80 32.50 66.34 -Channel 2 0 0 0 Further Evaluation Required: Probe 2 Channel3 0 F0 0I-Channel 4 0 0] 01 ['es 1No Probe 3 Channel 5 0 0 E0 Archive Media: Channel 6 0 0 0 0] Extlernl Hard Drive Probe 4 Channol 7 0 0 2 D CD-ROM Anlh ChannelS 0 0 DVD-RO/_D Analyst / SNT Level / Date: WIST HLL .xrIA M ANGLL IITomA r lo'00 I EXAM ET-ID-i'14 Project No. 13-1107 Date: 28-April-2014

)1111 SOUTHWEST TECHNOLOGIES

..... ~,, ............

AUTOMA.. EDDY CURRENT EXAMINATION RECORD Site/Plant

VC SUMMER UNIT I jWeld Ideatlinea 1o , , 44DM) 1-t00=A(D4'Z

.¶ lSwT-AET-3/2/0 Examinatio No.: ST-1D45 Pro ect No.: 13-1107 !Weld Descrlption:

Inlet Noz--.o-Safe End "B" Device Configtradow:

136-00045 MadCooL: 13"-0102 IScan Path.Drawint:

134-00121 Exam Date Examination Time Surface Temperature OC Data Acquislion Operator (s) / SW Level: 28-A -14 Start Ead Start End KARL SCHAFFEW i1l 0247 0334 68 68 Data Acquisition Scen Controller Parameters Increment Axis Planned Actual Scan Asia Planned Actual Positional Parameters Conoroller:

ANT Lower Limit 71.30 71.30 Lower Limit 65.00 65.00 Beam DNvction: Scan: X Upper Limit 74.80 74.80 Upper Limit 93.84 98.94 ET Probe Size: 38 (in Increment:

Y Iincrement inurval 0.050 Resolution 0.020 Scaning Speed IS "*SE Mode; Automatic Scan Conversion Counts 16000 Conversion Counts 558.54 Number of Scans: 11 Scan Motion: Bi-directionsl Conversion Units Inches Conversion Units Inches Azmunih/Nomzje CIL 76.03'Correction:

N/A _ _ _ _ evation44ozzle C/L N/A Module Parameters:

Calibration Records: Examinatlon Notes: Status Channel(s)

Skew Scan Offset Step Offset Pipe diameter -=31.03" Probe I On 1-2 +22.5" 5.35^ -2.21" ET-03-VCS-01 Circumference

-97.48" Probe 2 On 3-4 -22.5- 5.35" -2.21" ET-03-VCS-01 Weld C/L- 76.03" Examination Remarks: Examination Remarks: Examination from 240 to 365".[ _ Increment

&Sean Positions Actual Recordable Indications Analst Remarks Scan No.(s) Increment Position Scan Position Yes No N/A Attachmont:

Start Stop Stan Stop probe I Channell 0 3 0 2 Yes Q No 71 71.30 74.80 65.00 98.84 -Channel 2 0 0 0 Further Evaluation Required: prbe2 Channel 3 0 E) 0 Channel4 0 0 0 Ey'es 0/oNO Probe 3 Channel 5 0 D ED Archive Media Channel 6 0 0 M E External Had Drive Probe 4 Channel 7 0 0 E) 0 CD-ROM Channel8 0 [D 9 DVD-ROM Analyst I SNT Level / Date: WILLIAM ANGELL/ II/ST FOaMW Ir~r 10M Project No. 13-1107 EXAM ET-I D-15 Date: 28-April-2014

. B" SG Out Eaind'atloan heat No's.*]SwT-1 2 D1-AUTI 111/Mi ISWT-MD-AUTI 1121011 I~wT-PDI-AUT1lI2R3I kVT43DI-AET~2/

ISwT43DI-AET3J2/=i UTPffhq 1 M0O-Or)UT PAobe 2 t60-8)UFT P.b i (r848j UTr Pmba 2 CG0-881 ET PITW 1 Er PmoW 2 110002 110002 110001 110001 FM3-VC&M ET'r0Vcs-01 UT TWO & AWY Exm, UT CW & CCW Exam UT CW & CCW Exam Eddy CQmnt Exam Eddy Cuernt Exam Summnary-This weld was examined from the inside surface using SG-NExT, T-111. & MS5800 examirnation equipment.

The examination was limited due to the proxdmity of the nozzle taper. The examination coverage was 92%.No recordable indiations were detected during this examination.

IH I -"11 SOUTHWEST TECHNOLOGIES

-"- --c AUTOMATED ULTRASONIC EXAMINATION RECORD Site/PlaRt:

V.C. Summer Unit I Weld Identification:

1-4200A-29 (DM) Pro/Rev/Chg/fCN:

ISwT-PDI-AUT1 It/d0/a Project No.: )3-1107 Weld Dtscription:

so",B" om Naz4o-9fi(o'-igs,)

Device Confliguration:

036-00045 EaiainN. D R Mod.Conf.:

138-00102 Scan Path Drawing. 134-00121 Exam Date Examination Time Surface TemperatureOF Data Acquisition Operator (a) / SNT Level: Carlos IL BarberinoT

.T 27-Apr-14 Start End Start End 1402 1505 80 80 Scan Controller Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller:

SO-NExT Lower Limit 71.30 71.75 Lower Limit 0.00 0.00 Bearn Direction:

Twd/Awy Scan: X Rolator Drive Upper Limit 78.05 78.05 Upper Limit 50.10 50.03 Probe Type: PA22-001 Increment:

Y Axial Drive Inc. Interval (Resolution) 0.15 DCI (Scan Resolution)

,0.10 Scanning Speed: 2.0 inches per second Mode: Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scam: 46 Scan Motion: Bi-directional Radius In. 15.52" Weld C/L: 71.74" Correction:

N/A ___levalion/Nozzle CIL: N/A Master Acquiition File: DM.Pipe ID_90 AWY_270_TWDSkew.acq Calibration Records: Euxalnation Notes: Probe Channel tAngle s) Skew Scan Offset Step Offset Pipe Diameter = 31.03" Probe I ]-(60-88-L) 90V + 70.34(in)

-1,29(in) 110002 Cirowference 97.48" Weld Centerline

-71.74 Probe 2 2-(60-98-L) 270* + 59.64(in)

-2.79(in) 110002_______________

______ ____________

_______________

______________Examination Remarks: Probe 3 3-(0Profilownety) 00 + 0.00(in) -2.04(in) 110002 N/A N/A N/A N/A N/A N/A Inl'etment

& Scan Positions Actual Recordable Indications Analyst Remarks Scan No.(s) increment Position Scan Position Yes No N/A Atachnment:

Start Stop Stan Sop Channel I (J] 0D 1 43 71.75 78.05 0.00 50.03 Probe I Channel 2 0 0D 0 0 Yes 0D No Channel 3 l *. 0 ED Further Evaluation Channel I El E] t] Required: Probe 2 Channel 2 D F) 171 Channel 3 0] El [] Yes a) No Channel I El E Archive Media: Probe 3 Channel 2 [E E)Channel 3 p 0 E External Hard Driv__ _ _ _ _ _ _ _Channell I -.Q " 0]Probe 4 Channel 2 FL rl 0 ' CD-ROM I Channel 3 El El 0 DVD-ROM Analyst SNT Level I Date: Jesse R. Delgado I H 1 30 APR 2014 4 f-4L i A rWTIFORM N.. IIT.O (PA.. 1/111)

,)IHI IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant:

V.C. SummerUnit I Weld Identification:

1-4200A-29(DM)

Pro/Rev/Chg/ICN:

ISwT-PDI-AUTII/2iI Examination No,: ID-17 Project No.. 13-11i07 Weld

Description:

(ioll.3I--)

Device Configuration:

13"-0045 Mod.Conf.:

138-00102 Scan Path Drawing: 134-00121 Exam Date Examination Time Surface Temperature IF Data Acquisition Operator (s) /SNT Level: Carios It Barberlno/lT 27-Apr-14 Start End Start End 1232 1302 80 80 Scan Controller Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller.

SG-NExT Lower Limit 71.30 71.60 Lower Limit 48.47 48.47 Beam Direction:

Twd/Awy Scan: X Rotator Drive Upper Limit 78.05 78.05 Upper Limit 98.84 98.80 Probe Type: PA22-001 Increment:

Y Axial Drive Inc. Interval (Resolution) 0.15 DC] (Scan Resolution) 0.A0 Scanning Speed: 2.0 inches per second Mode: Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans: 46 Scan Motion: Bi-directional Radius In. 15.52" Weld C/L: 71.74" Correction:

N/A I _Elevation/Nozzle C/L N/A Master Acquisition File: DMPipelD_90 AWY_270_TWDSkew.acq Calibration Records; Examination Notes: Probe Channel /Anga's) Skew Scan Offset Step Offset Pipe Diameter = 31.03" Probe I 1-(60-88-L) 900 + 70.34(in)

-1.29(in) 110002 Circumference

= 97.48" Weld Centedine

= 71.74 Probe 2 2-(60-88-L) 270° -59.64(in)

-2.79(in) 110002 Examination Remarks: Probe 3 3-(O°Pror'dometry) 00 + 0.00(in) -2.04(in) 110002 N/A N/A N/A N/A N/A N/A: ~~~~~Data

":., Increment

& Scan Positions Actual -Recordable Indleationa Analyst Remarks Scan No.(s) Increment Position Scan Position Yes No N/A

Attachment:

Stan Stop Stan Stop Chane.l I 0 0] E-44 71.60 78.05 48.47 98,80 Probe I Channel 2 0 9 0 0 Yes 21 No Channel 3 0 Q 0 Further Evaluation Channel I (] El Q Required: Probe 2 Channel? 2 ] 2 )0 Channel3 3 0 2 0 Yes 0 No Channel I 0i C 0 Archive Media: Probe 3 Channel 2] ] 0 Channel 3 E 0 0 0 External Hard Drive Channel I El 0 Probe 4 Channel 2 nl G 3 0 CD-ROM Channel 3 ' 0 0 DVD-ROM A nalyst I SN T L evel/ D ate: J s AdP Jesse .Deigado / II / 30 APR 2014 I r1)IsWTOaMrt.. .ITmq [a.llw.11)

" " " IHI SOUTHWEST TECHNOLOGIES

~AUTOMATED ULTRASONIC EXAMINATION RECORD Sit/Plant:

V.C. SummerUnit 1 Weld Identflicatlon:

1-4200A-29(DM)

Pro1RevlCh/IuCN:

ISwT-PDI-AUTII/2/I Examination No. ID-I1 Project No.: 13-1107 Weld Descri so -to.sE @--i12s,)

Device Conf1turatioa:

136-00045 Mod.Conr.:

138-00102 Scan Path Drawing. 134-00121 Exam Date Examination Time Surface Temperature OF Data Acquisition Operator (s)/SNT Level: Carlos Barberlno/1T 27-Apr-14 Start End Start End 927 1007 so go Scan Controller Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller.

SG-NExT Lower Limni 71.3Q 71.38 Lower Limit 0.00 0.00 Beam Direction:

Cw/Ccw Scan: X Rotatr Drive Upper Limit 74.80 74.80 Upper Limit 33.85 33,85 Probe Type: PA22-00D Increment:

Y Axial Drive Inc. Interval (Resolution) 0.05 DCI (Scan Resolution) 0.05 Scanning Speed: 1.5 inches per second Mode: Automatic Scan Coverion Units Inches Conversion Units Inches Number of Scans: 71 Scan Motion: Bi-d&rectional Radius In. 15.52" Weld C/L: 71.74" Correction:

N/A Elevation/Ncazle C/L N/A Master Acquisition File: DM_PipeID 0 CW 180_CCWSkew.acq Cbration Records: Examination Notes: Probe Channel /Anele(s)

Skew Scan Offset Step Offset Pipe DiameterR=

31o.03 Probe I 1-(60-88 0 L) 00 + 27.77(in)

-2.04(in) 110001 Circumference

= 97.48" Weld Centerline

= 71.74 Probe 2 2-<60-58L) 1800 + 37.21(in)

-2.04(m) 110001 inaio o rks: N/A N/A N/A N/A N/A N/A N/A NIA N/A N/A N/A N/A Incremenit

& Stan Positions Actual Recordable Indkcations Analyst Remarks Scan No.(s) Increment Position Scan Position Yes No N/A

Attachment:

Start Stop Start Stop Channel I 0 0 0 70 71.38 74.80 0.00 33.85 Probe I Channel 2 0 0 0 -Yes 2] No Channel 3

0 0 Further Evaluation Channel I 0 2] D 0 Required: Probe 2 Channel 2 El 2] e Channel 3 0 0l 11 0 Yes E] No Channel i 0 0 0D Archive Media: Probe 3 Channel 2 0 0 F)_Channel 3 1 0 2] 0 External Hard Drive Channel 1 0 0__Probe 4 Channel 2 E1 0 0 0 CD-ROM Channel 3 0 0D DVD-ROM Analyst i SNT Level I Date: J D /A JeseR. Delgado/l l/30 APR 2014 -" ISw-rT'ORMt N. err0 (3ev. I/IN)

IHI IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plat:

V.C. Summer Unit I Weld Identiffication:

1-4200A-29 (DM) Pro/ReylChg(ICN ISwT-PDI-AUT1I I ' Examiation No.: ID-19 Project No.: 13-1107 Weld

Description:

so-B-iowN.L,.sE tD-.zis Dvice Confiratlon:

136-00045 Mod.Cont:

133-00102 Scan Path Drawing: 134-00121 Exam Date Examination Time Surface Temperature OF Data Acq2isto Operator (s) SPIT Level: Carlos f. Barb2r.a0IT 270Apr- 14 Start End Start .End L ]011 1058 so so m ..Scan Controller Parumeterw Increment Axis PlannSd Actual Scan Ais Planned Actua l Positional Parameters Controller:

SG-NECT Lower Limit 71n30 71.40 Lowe3 Limit 32.550 a Beam Dimron: Cw/Ccw Scan: X Rotator Drive Upper Limit 474.80 Upper Limit 6 66.34 Probe Type: PA2C--I Lncrancrt:

Y Axial Drive Inc. Interval (Resolution) 0.05 DC] (Scan Resolution) 0,05 Scanning Speed: 1.5 inches per second Mlode: Automnatic Scan Conversion Units Inches Conversion Units Inches Number of Scans: 71 Scan Motion: Bi-directional Radius )a. 15.52" Weld CIL: 71.74" CorrecnSon:

N/A Eloystion/Nozzle CIL: NA Maser Acqisition File. DM_PipeeID 0 CW 18D CCW Skew.acq a4Examination Notes: Probe Channel tAnghfs) Skew Scan Offset Step Offset *Pip Diameter 31.03" Probe I 1-(60-88-L) 00 + 27,77(in)

.2.04(in) 110001 Circwnfren~ce

=97.48" Weld Centerline

= 71.74 Probe 2 2-(60-98-L) 1800 + 37,21(in)

-2.04(in) 110001 Examination Remarks: NIA NIA NIA N/A N/A N/A N/A N/A N/A NIA NIA N/A Increment

& Scan Positions Actual Recordable Indications Anal'st Remarks Sa os Increment Position Scan Position Yes No NIA

Attachment:

SaN.() Start Stop Start Stop Channel I El ED3 1]69 71.40 74.80 32.50 66.34 Probe I Channel 2 0] 2] r- ] Yes E) ND Channel 3 0] [0 [] Furother l~valuaion Channel I Q e] I-' Required: Probe 2 Chwemnl 2 0- r) F-1 Channel 3 0] 2- 0][ Yes [D No Channel 1 0-- .[Z) Archive Media: Probe 3 Channe 2 07 []Channe) 3 0 : External H-ard Drive Chanel 1 2] " =Probe 4 Channel 2 n" [7 [ ] cImOM Channel. 3 ( " ] [ DVD-ROM Annly iWI/SNT Leve l/D'ate , J ess~eR. Delgado tlll l30APR 2014 No. Ir'J'So (Rev. In 1)

IHI 111 SOUTHWEST TECHNOLOGIES

... " AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plazi

V.C. Sumrcr Unitl Weld Identification:

I-4200A-29 (DM) Pro/RevfChg/]CN:

ISwT-PDI-AULT1 1/2/0/1 Examinatiou No.. ID-20 Project No.: 13-1107 Weld

Description:

SO o.IS'ouia.ýPsE ntr-W-) Device Conflguration:

136-00045 Mod, Coo.: 138-00102 Scan Path Drawing: 134-00121

Exam Date Examination Time Surface Tern rahre OF Dats Acquisition Operator (s)/SNT Level: CarloslH.

Barberimo/IT 27-Apr.14 Start End Start End 1105 1142 j 80 90 q411 Scan Controller Parameters Increment Axis Planned AActual Scan Axis Planned Actual Positional Parameters Controller:

SO-NExT Lower Limit 71.30 71.35 Lower Limit 65.00 65.00 Beam Direction:

Cw/Ccw Scan: X Rotator Drive Upper Limit 74.80 74.80 Upper Limit 98.84 98.80 Probe Type: PA22-001 Increment Y Axial Drive Inc. Interval (Resolution) 0.05 DCI (Scan Resolution) 0.05 Scanning Speed: 1.5 inches per second Mode: Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans: 71 Scan Motion: Bi-directioned Radius In. 15.52" Weld CIL: 71.74" Correction:

N/A C/L: N/A MasterAcquisition File: DMPipe.DO0 Calibration Records- Examination Notes: Probe Channel/Angle(s)

Skew Scan Offset Step Offset Pipe Diameter 31.03" Probe 1 1-(60-88L) 00 + 27.77(in) 2.04(in) 110001 Circumference

= 97.48" Weld Centerline

= 71.74 Probe 2 2-(60-88-L) 1800 + 37.21(in)

-2.04(in) 110001 gumtnation Remarks: N/A N/A N/A N/A N/A N/A N/A NIA N/A N/A N/A N/A DatgrAisuvtl*

.- .Increment

& Scan Positioas Actual Recordable Indications Analyst Remarks Scan No.(s) Increment Position Scan Position Yes No N/A

Attachment:

Scan o SStart so Start Stop Channel I 0 0 0_70 71.35 74.80 65.00 98.80 ProbeI Channel2 01 91 0 Yes 0 No Channel 3 0 2 0 Further Evaluation I Channel I 0 S 0 Required: Probe 2 Channel2 2 l 0 Channel 3 0 0 C Yes (A No Chtann.el 1 0 0 0 Archive Media: Probe 3 Channel 2 fl []Channel 3 ' E [D External Hard Drive Channel 1 0 0 El Probe 3 Channel2 C -[ 0 CD-ROM Channel 3 1 0 0 DVD-ROM Anulyst /SNT Level /Date: & A Jesse R. Delgado / 11 / 30 APR 2014 enf- A-- s, iAD UTro (". 11t1) 1111 SOUTHWEST TECHNOLOGIES AUTOMATAD EDDY CURRENT EXAMINATION IRECORD________

Site/Plant:

VC SUMMER UNIT I Weld Identifleatloa:ý

.-L4,WA..L (DM) %- ft-2!ý Pro/Rev/ChfJ1CN:

ISwT-AET-3/2/0 Examination No.: ET-ID-16 PrDject No.: 13-1107 Weld Dcqcripn O t NO-to-rf End VB -SDevice ConfigurLtion:

13RS-nard Mod.Couf.:

13B-00102 Scan Path Drawing: 134-00121 Exam Date Examination Time Surface Temnperature 0 C Data Acquisition Operator (s) / NT Level- 7Ar1 Slarm End St r~l End WILLIAM ANGELL /11 27-Apr-14 1153 1228 68 68 Data Acquisition Scan Controller Parameters Increment Axis Planned Actual Scan Axils Planned Actual Positional Parameters Controller:

ANT Lower Limit 71.30 71.30 LowerLimit 0.00 0.00 Beam Direction:

NIA Scan: X Upper Limit 78.05 78.05 Upper Limit 50.00 50.00 JET Probe Size: .38 (in: Increment:

Y Increment Interval 0.150 Resolution 0.020 Scanning Speed 1.5 "/sE(Mode: Automatic Scan Conversion Counts 16000 Convursion Counts 558.54 Number orScans: 46 Scan Motion; Bi-directional Conversion Units Inches Conversion Units Inches AzimunthNozzle CIL 76.03'Correctiort:

N/A _levationifNo'le C(/ NIA Module Parameters:

Calibration Records: Examination Notes: Status Channel(s)

Skew Scan Offset SlCp Offset Pipe diameter=

31.03" Probe I On 1-2 + 22.5* 5.35" -2.21" ET-03-VCS-01 Circumference-97.48" Probe 2 On 3-4 -22.59 -5.35" -2.21" ET-03-VCS-01 Wcld C/L,' 76,03" Examination Remarks: Examination Remarks: Examination from 0 to 180I .'Data Aiayl Increment

&Scan Positions Actual Recordable Indications Analyst Remarks Scan No.(s) Increment Position Scan Position Yes No VN/A

Attachment:

,____ Start Stop Start Stop Prow I Channel 1 0 2 0- -Ees 0 No 46 71.30 78.05 0.00 50.00 Channet 2 _0 0 Further Evaluation Required: Probe2 Channel3 0 .E) 0 Channel 4 0 ) 0 [Q (Yes ONo Probe 3 Channel 5 0 0] E] Archive Media: __Channel 6 0. 0 0 0D External Hard Drive_____ Channel 7 0- Q 0 0 CD-ROM Channel B El 0 0 DVD-ROM A nalyat / SNT Level / Date: WLLIAM ANGELL/ II/ Z ,/alW 7OO 1,e zr ,ae /ISWT FORM No. rr MAS f Project No. 13-1107 EXAM ET-ID-16 Date: 26-April-2014 Sf b IT A4,k Art to =-,."vow* n-1* (1*5 Il I I :4*14JiL I THU SOUTHWEST TECHNOLOGIES A..TOMA...

EDDY CURRENT EXAMINATION RECORD Sitc/Plant:

VC SUMMER UNIT I Weld Identifleation:

A4A! _ (DM) I1-RMA -t Pro/Rev/C&WCN:

ISwT-AET-3/2/0 o Project No.: 13-1 107 Weld

Description:

Outlet NoT.-to-Safre End 'B" Device: Conjieration:

136-00045ExmntoN..

K-D1 Mocl.Cou.:

138-00102 Scan Path Drawing: 134-00121

}xam Date iExamination Time Surface Temperature OC Data Acquisition Operator (s) I SNT Level: 27-Apr-4 d Start End WILLIAM ANGELL/ 11 1 1232 1302 68 68 Data Acqulttlon Scan Controller Parameters lcrement Axis Planned Actual Stan Axis Planned Actual Positional Parameters Controller, ANT Lower Limit 71.30 71.30 Lower Limit 48,47 48.47 Bcam Direction:

Nh, Scan: X Una Limit 78.0s 78.05 Upper Limit 98.84 98.84 "ET Probe Size: .38 (in lncr=ct: Y Inlmuent Interval 0.150 Resolution 0.020 Scanning Speed I.S "s FJ Mode: Auomatlic Scan Conversion Counts 16000 Convesion Counts 558.54 hurtber orScans: 46 Soan Motion: Si-directional Conversion Units Inches Conveasion Units Inches AztmuandVNozzle C/IL 76.03 Correction:

N/A IECevioV IL NI1 Module Parameters.

Calibration Records: Examination Naot: Status Channel(s)

Skew Sean Offset Step oiet Pipe diamer= 31.03" Probe I On 1-2 + 22.5* 5.35" -2.21* ET-03-VCS-01 Cir.ucnftree

-=97,48" Probe 2 On 3-4 -22.5 -5.35" -2.2 1 *"T-03-VCS,01 Weld CIL- 76.03" Examination Rewarb;Examination Remarks: Examinhtion fmm 180 to 2360°.-.. ... ., ", : .-.... --..Increment

& Scan Positions Actual Reeordable Indications Analyst Remarls Scan No.l) Increment Position Scan Position Yes No N/A

Attachment:

Start Stop Start Stop Probe I Channel 1 0- 0 C) L-es O No 46 71.30 78.05 48.47 98.40 -Channel 2 03 [a 0 Further Evaluation Required: Probe 2 Chennel 3 0 0 C3_ Channel 4 0 E] 0 0(as 2No Probe 3 Channel5 0 0 0 Archivc Media: Channel8 0 0- El E) External Hard Drive Probe 4 Channel7 j [0 1Z) 0 CD-ROM_______ _____ __ ___ _____ ______Channel 8 0 [ DVD-ROM __________________

Analyst / SNT Level /Date: WILLIAM' ANGELL/ IIr/ " iY "m 0,oa tio Ib" Project No. 13-1107 EXAM ET-ID-17 Date: 27-April-2014 Op *-- -I tmlb _U46 it"~vs..4 SA:w 30- --', iJ i I I HISOUTHWEST TECHNOLOGIES AUTOMAW EDDY CURRENT EXAMINATION RECORD Site/Plant VC SUMMER UNIT I Weld ldenllflcatiot fLI-A 3.& (DM) %--?J'lN .ProIRev/Cbg/ICN:

ISWT-AET-3/W0 Examinalton No.: IT-D-i18 Project No.: 13-1107 Weld

Description:

JOutt N0z.-to-Safý End *B" _Deice Cont ration: 136-00045 Mod.ConL:

138-0D102 Scan Path Drawing, 134-00121 Exam Date Examination Time Surface Temperature

'C Data Acquisition Operator (s) / SNT Level: 27-Apr-14 Start End Start Ead WILLIAM ANGELL / l 0927 1007 69 68 Data Acquisition Scax Controller Parameters Increment Axis Planned Actual San Axis Planned Actual Positional Parameters Controller ANT Lower Umil 71.30 71.30 Lower Limit 0.00 0.00 Beam Direction:

N//ScX: X Upper Umit 74.80 74.80 Upper Limit 33.85 33.15 JET Probe Size: .38 (in IY Increment Interval 0.030 Resolumion 0.020 Scanning Speed 1.s "AeR Mode: Automatic Soan Conversion Counts 16000 Conversion Counts 558.54 NumberofScans:

71 Scan Motion: Bi-directional Conversion Units Inches Conversion Units Inches AzimanthlNozzo C/L 76.03 Correction:

N/A E__vadowNoJ v C/L NUW Module Parameters:

Calibration Records: Examination Notes: Status Channel(s)

Skew Scan Offset Step Offset __Pipe diameter-31.03'Probe I On 1-2 +22.50 5.35" -2.21" ET-03-VCS-01 Circumftrince

-97,48r Probe 2 On 3-4 -22.5Y -5.35" -22l" ET-03-VCS-01 Weld CIL- 76.03'....._ __ Examlmxtloa Remarks:--____E "xamination Remarks:....___ _ExaminallO fim 0 to 1250.Increment

& Scan Positions Aetual Recordable Indications An*"yt Remarks Scan No.(s) Incmmaent Position Scan Position Yes No NIA

Attachment:

Start Stop San stop Pro I Channel 1 0 1] --Res 0 No 71 71.30 74.80 0.00 33.85 Channel 2 [ 0 0 Further Evaluation Required: Probe 2 Cfinnet 3 0 [j 0[_Chatrnill4 0U 0 Eks OaNo Probe 3 Chinnn 5 [I 0 03 Archive Media: Channel 6 0 ' [0 E) External Hard Drive Probe 4 Channel 7 0 0 [] 0 CD-ROM Channel8 " 0 10 DVD-ROM Analyst / SNT Level I Date: WILLIAM ANGELL/ 11/7swr FORM N& FT Iwo I I /

t P ro je c t N o .1 3 -1 1 0 7 E X A M E T -ID -1 8 D a te : 2 7 -A prl-2 0 1 4 NJ 414 01 ý

H a9Is f In e lk no, uuw-fm&*fmoonsift I* rwt WnWIBE~Uaum~i bWi QwhiuIA II K-4~14.ISb.A4S24~.

)IHI SOUTHWEST TECHNOLOGIES AUTOMAT D EDDY CURRENT EXAMINATION RECORD Site/Plant:

VC SUMMER UNIT I Weld Identification:

A(, (DM) % -kobA Pro/Pw.v/CWCJICN:

ISwT-AET-32/0 Examinaton No.: ET-ID-19 rojet No.: 13-1107 Weld

Description:

Outlet No,-to-Saft End "B" .Devlc Confluratlon:

136-00045 Mod.Conr.:

138"0102 Scan Patt Drawing: 134-00121 Exam Date Examination lime Surface Temperature C Data Acquisition Operator is) / SNT Level: 27-Apr--14 start Ead Start Engd WILLIAM ANGELL] 11 1014 1058 68 68 Data Acquisition Scan Controller Parameters jlcrement Axis Planned Actual Scan Ais Planned Actusl Positional Parameters Controller:

ANT Oimit 71.30 71.30 Lower Limit 32.50 32.50 Beam Direction:

N/I Scan: X Upper Limit 74.80 74.80 Upper Limit 6634 66.34 ET Probe Size: .38 (in Increment Y Increment Interval 0.050 Resolution 0.020 Scanning Speed -.5 "/Se8 Mode: Automatic Scan Conversion Counts 16000 Conversion Counts 558.54 Number of Scans: 71 Scan Motion: Bi-dirctional Conversion Units Inches Conversion Units Inches AzimgWh/d C/CIL 76.03 Correction:

NIA ___leviawwcnlozzle C/L Nit Module Parameters:

Calibration Records: Examination Notes: States Chaoseka)

Skew Scan Offset Step Offset Pipe diameter -31.03" Prbe I On 1-2 + 22.50 5.35" -2.210 ET-03-VCS-01 Circumference

-97.49" Prob 2 On 3-4 -225 -5.35" -2.21F ET-03-VCS-01 Weld C/LP 76.03" Examination Remarks: Examination Remiab:_Exuninaion from 120 to245'.increentea Scan Positions Actual Recordable Indications Analyst Remarks Incretnent Position Scan Position Yes No NIA Anachm:ni:

Start Stop Start Stop Probe t Channel 1 0 0 0 E 'Yes 0_ No 71 71.30 74.80 32.50 66-34 _ _ Channel 2 0 2 [ Furher Evaluation Required: Probe 2 Channel 3 0 9R f 0_Channel 4 0 E0 0 E'es ONo Probe 3 Channel 5 []0 0 El Archivc Media: 3Channel8 0 0 B 0) External tlard Drive Probe 4 Channel 7 0 0 1B 0 CD-ROM ChannelS c p 0 DVD-ROM Analyst /ISNT Level I Dare-WILLIAM ANGELL/It I1/Swr fth jrT 100/

)Project No. 13-1107 EXAM ET-ID--i 9 Date: 27-April-2014.h. .~.. ~-- -, -I MISOUTHWEST TECHNOLOGIES AUTO EDDY CURRENT EXAMINATION RECORD Site/Piat VC SUMMER UNMT 1 Weid Idenilficatlon

%, (.DM) ._I 3A- Prolkev/CbnJCN:

ISwT-AET-3/2/0 ,Project No.; 13-1107 Weld Descrption:

[o utlet Noz.-to-Safk End "R" D evic'e Configuration:

1364010 5 E m lminN .T ID Mod.Con£:

138-00102 Scan Path Drawlng: 134-00121 Exam Date Examlnmtloa Time Surface Temperature'C Data Acquisition Operator (s) / SNT Level: 27A14 Start End Start End WILLIAM ANGELL 111 I7 41105 1142 68 68 Data Acqpbition Sean Controller Parameters lncrement Axis Planned Actual Scan Ais Planned Actall Positional Parameters Controller:

ANT Lower Limit 71.30 71.00 Lower Limit 65.00 65.00 Beam Direction:

N/A Scan: X Upper Limit 74.80 L 74.80 Uppa Limi 98.34 98.84 ET Probe Size: .38 (inf Increment Y Increment Interval 0.050 Resolution 0,020 Scamning Speed i.s "ISE Mode: Automatic Scan conversion Counts 16000 Conversion Comnts 558.54 Number of Scans: 7I Scan Motion: Bi-directional Conversion Units Inchles Conversion Units Inches AzifAWAhNouk C/IL 76.03'Correction:

N/A _ElvmioINozzle C/L N/a Module Parameters:

Callbrtlion Records: Examination Notes: Status Channel(s)

Skew Scan Offset Step Offset Pipe diameter -31.03" Probe I On 1-2 + 22.5" 5.35" -2.21" ET-03-VCS-0l Circum*cnce

= 97.43" Probe 2 On 3-4 -22.5" -5.35" -221" ET-03-VCS-01 Weld C/IL 76.03" Exauufnateon Remarks: Examination Rcmark: Examination from 249 to 365", Increment

& Scan Positions Actual Recordable Indlcatlou Anayst Remarks Scan No.(s) rncr nt Posltion Scan Position Yes No N/A Artacme-nt:

Stan NS. Start. Stop St. Stop probe I Channel 1 0 0D 1) E) Yes 0 NO 71 71.00 74.80 65.00 98.84 Channel 2 0 0 0 Further Evaluation Required: Probe 2 Channel 3 0 G 0 [_-Chanrel 4 0 f 0) [ 3 I es ONo Probe 3 Channel 5 0 0) 0 Arcbive Media: Channel6 0 0 E 0E Extrnal Hard Drive Probe 4 Channel 7 0 D 0 0 .CD-ROM Channel 8 0 0] DVD-ROM Analyst/ SNT Level / Date: WILLTAMANGELL/

H1/ISV/ 1.i1KV_1V_.A" I If -I I , I /

Project No. 13-1107 EXAM ET-ID-20 Date: 27-April-2014 111' IHI Southwest Technologies Examination Summary Record G"VgI'C" ummer Nudear SIation Unit 1,, SUm V Sheet No. 00500: Steam GeneratOr Une Sl3. "C" SG In Noz-t-,SE IdenrW%=on:

1-4300A-29 (OM)Method nmff tICN Eiwznlnatlon host No78. No. NRW Other Remarks AUT ISwT-PDI-AUTI1j2/I/1 tUT Probe 1 (5&-W) 1100-4 21-22 X -UT TWD& AWY Exam AUT ISwT--PDI-ALUT 1120I1 UT Probe 2 f6o-88') 11o1004 21-22 X -LIT TWD & AWY Exam AUT ISWT-PDI-AUT11/2)12 0 T Probe I (M0""- 110003 23-25 X -UT CW & CCW Exam AUT ISwT-POI-AUTI1I2/0 Lrr Pro 2 (60.88") 110003 23-25 X -UT CW & CCW Exan AET ISwT-PDI-AET3/210/0 r Probe I ET03-VCS-04 23-25 X -Eddy Cunent Exam AET ISwT-PDI-AET312O ET Pmbe 2 ETs-VCS-04 23-25 X -Eddy Current Exam Examinatfn Summary: This weld was examined from the Inside surface using SG-NExT. T-Ill. & MS5BO examination equipmenL The examination was limited due to the proximity of the nonzle taper and a small ares of weld spatter. The examination coverage was 9.1.5%.No recordable indicatin's w"ere detected during this examination.

Snam:Date:

30 zaPlA ~So[H P aroject ELeti &j Ia __________________

..~~2D q.** ...,

SthIl eHnooIe IHI SOUTHWEST.TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD ShimPlant:

VC. SummerUnit)

Weld Identlflcaton:

1-4300A-29 (DM) Pro/RevIChp/ICN:

ISwT-PDl-AUTII12/011 Examination No.: /TD-2RR Project No.: 13-1107 Weld

Description:

soGc-IoNoaIo-Se to*.i m- Device Conflguration:

136-00045 Mod.Conf.:

38.-00102 Scan Path Drawing: 134-00121 Exam Date Examination Time Surface Temperature OF Data Acqtisltion Operator (s)I SNT Level- Bryan Wright/ I 25-Apr-14 Start End Start End 2215 2243 80 80"" -kAT " Scan Controller Parameters Increment Axis Planoe Actual Scan Axis Planned Actual Positional Parameters Controller.

SG-N~xT Lower Limit 7 i.3 72.10 Lower Limit 0.00.00 Beam Direction:.

Twd/Awy Scan: X Rotator Drive Upper Limit 78.05 78.02 Upper Limit 5D. 10 50.03 Probe Type: PA22-00lIncrement; Y Axial Drive Inc. Interval (Resolution) 0.1i5 DCI (Scan Resolution) 0.1I0 Scanning Speed: 2.0 inches per second Mode: Automatic Scan Conversion Units inches Conversion Units Inches Number of Scams: 46 Scan Motion: Bi-drectional Radius In. 15.52" Weld C/L- 71.74" Correction*.

N/A ElevstiorLNozzde CtL" N/A Master Acquialtton File: DM_PipeID 90 AWY 270 TWDSkew.accI Calibration Records: Examination Notes: Probe Channel /Angle(s)

Skew Seen Offet Step Offset Pipe Diameter = 31t.03" Probe I 1-460-88-L) 9" + 70.34(in)

-1.29(in) 110004 Circumference

= 97.48" P+ )- Weld Centerline

= 71.74 Probe 2 2-(60-88 0 L) 2700 + 59.64(in)

-2.79(in) 110004 Examination Remarks: Stpeda ryinctonremena derks el:Se Probe 3 3-(0*Profilometry) 0V + 0.00(in) -2.04(in) i 10004 S earl increment due to weld srer N/A N/A N/A N/A N/A N/A Incremenlt

& Scan Positions Actual Recordable indications Analysg Remarks Scan No.(s) Incremnent Position Scan Position Yes No N/A Afttchment:

Start Stop Starn Slog) Channel 1 0] G) 11 41 72.10 78.02 0.00 50.03 Probe 1 Chaner1~2 0- G)] [] Yes 2] No Channel 3 11 D ED Fuflher Evaluation IChannel 1 0] [ [ R~equh'od:

Probe 2 Channel 2 r] ] [Channe 3 0 0 2 Yes 2D No ,ChanneA 1 [] 0 [] Archive Media: Probe 3 Channel 2 0] Q] B Channel 3 11 0] [][ External Hm-d Drive Channel I n] 0 Probe 4 Channel 2 M7 11 C][ CD-ROM_.Channell 3 [Q 0] e DVD-R.0M Analyst / SNT Level / Date: Jes s iL Delgado/ f1/ 30APR 2014 A --iswr FORM 11(m V1 is [Re'. 111 I)

)N IHI IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Sitcplant:

V.C. Suwmer Unit I Weld Idenfirmation.

1-4300A-29 (DM) Pro/Rev/ChZiCN:

ISwT-PDI-ALrT 11/2/0/1 Examination No.: ID-22RR Project No.: 13-1107 Weld Descrption:

0f OC-RNo*-,Se gs(1.1VS30 Device Conf oration: 136.00045 Mod.Conf:

138-00102 Scan Path Drawing: 134-00121 Exam Date Examination Time Surface Tern arture OF Data Acquisition Operator (s)I SNT Level: ryan W right/ 25-Apr- 14 Samrt End Start End 2332 0000 30)80-.. ...... ...I .u a .. _. .. .- ... _ _ , , " .... , *: -h ...Scan Controller Parameters Increment Axis Planned Actual Ran Axis Planned Actual Positional Parameters C.ontroller.

SG-NFIxT Lower Limit 71.30 71.30 Lower Limit 48.47 48.47 Beam Direction:

Twd/Awy Scan: X Runner Drive Upper Limit 78.05 78.05 DUp-RLimit 98.84 9O.84 Probe Type: PA22-00O Increment:

Y Axial Drive Inc. Interval (Resolution) 0.15 DC1 (Scan Resolution) 0.10 Scanning Speed: 2.D inches per second Mode: Automatic Scan Conversion Units Inches CDonversion Units Inches Numbr of Scans: 46 Scan Motion: Bi.-dieceional RDaius In. e552" Weld C1L: 71.74" correction:

NIA .vation/Nozzle C/L: N/A Muster Acquisition File: DM_Pipe_]D 90 AWY 270 T'WD Skew.acq Calibration Reco"d= Examination Notes: Probe Channel/Angle(s)

Skew Scan Offset Step Offset Pipe Diameter :31.03" Probe I ]-(60-99-L) goo + 70.34(in)

.!.29(in) 110004 Circumf~emc=

97.48" Weld Centcrline

-- 71.74 Probe 2 24.("80-8L) 270* + 59.64(in)

-2.79(in) 110004 Examination Remarks: Probe 3 3-(OoProfilometr')

00 + 0.00(in) -2.04(in)

I1100D4 NIA N/A NtA NtA N/A NIA Increment

& Scar. rosatloim Actual Recordable Indications Analyst Remarks Sa D( Increment Position Scan Position Yes No N/A

Attachment:

Sn .() Star Stop Start Stop Channel 1 0] [a 11 46 71.30 78.D5 48.47 98.84 Probe I Channel 2 0'- 21 0] 0 Yes 0] No Channel 3 11 0" 0] Further Evaluation

-,Channel 1 0'I [] l' Required: Probe 2 Channel 2 n] [ " Channel 3 ID C] [ ] Yes E) No Channe) 1 0] 0 R-1[ Archive Media-Probe 3 Channel 2 [] ED Channel 3 F1 a] .T 2 External Hard Drive Channel I [7 0 0] [Probe 4 Channel 2 n- [] [] 0 CD-ROM Channel 3 E) 0 ~ Ej DVD-ROM Analyst ISINT L~evel/Date:/ Jesse R. Delgado I Il 130 APR 2014 XGT UTSO (Vw 111v Il)

)IHI IHI SOUTHWEST TECHNOLOGIES S"" AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant

Y.C, Summer Unit Weld Identification:

1-4300A-29 (DM) ProfRecvChg'CN:

ISwT-PDI-AUTI 1/2/0/I Examination No.: TD-23RR Project No., 13-1107 Weld

Description:

So0C1i"Nw-to-SE DeviceConfl Vuration:

136-00045 Mod.Conf:

138-00102 Scan Path Drawing: 134-00121 Exam Date Examination Time Surface TemperatureOF Dot e Acquisition Operator (s) SNT Level; Car)os H. Barb2rino)IT 25-Ap1-14 Start End Start End 1:24:00 PMT 1:5D:00 PM 8D so Scan Controler Parameters Increment A Sa n Actual R l A xis Planned Actual Positional Parameters Controller.

SO-NExT Lower Limit 71.30. 71.30 IEower Limit 0.00 0.00 Beam Direction:

Cw/Ccw Scan: X Rotator Drive .Upper Limit 74.80 75.D0 Upper Limit 33.85 1 26.00 Probe Type: PA22-001 Increment:

Y Axial Drive Inc. Interval (Resolution) 0.05 DCI (Scan Resolution) 0.05 Scanning Speed: Aa e inches per secon Mode: Automatic Scan Conversion Units Inches Conversion Units Inches Numbe of Scans: 71 Scan Motion: Bi-directional IRadius In. 15.52" Weld CIL: 71.74" Correction:

N/A Blevanion/Nozzlc C/L: NIA Master Acquisition Vile: DMPipejiD_0 CW I g0 CCWSkew.acq Calibration Records: Examination Notes: Probe Channel/AngPe(s)

Skew Scan Offset Step Offset Pipe Diameter 31.03" Probe I 1-(60-88-L)

0. + 27.77(in)

-2.04(in)

I1I0003 97.48" Weld C3eterline

= 71i.74 Probe2 2-(60-88-L) 180P + 37.21 (in) 2.04(in) 110003 Examination Remarks-N/A N/A NIA N/A N/A N/A N/A N/A N/A N/A N/A. N/A Increment

& Scan Positions Actual Recordabk Indications AValDt RemarksO Sa o() Increment Position Scan Position Yes No N/A

Attachment:

AanStar Stop Sta Stop Channel I .Q [74 71.30 75.,DO 0.00 26.00 Probe I Channel 2 0] 11 0] Yes S] No Channel 3 [] 0 0Z Further Evaluation Channel I El E] 0-' Required: Probe 2 Channel 2 n' F3 A 2 Channel 3 0 b 2 0 Yes El No Channel 1 0] 0] 0 Archive Media: Probe 3 Channel 2 Q .0 El Channel 3 El B] E] External Hard Drive Channell 0 [0[]Probe 4 Channel 2 1-1 13 9] 0 CD-ROM IChannel 3 E) []D[ DVD-ROM Analyst ISNT Uevel /Date:FORIM Na. UT..5, lar. fINt)

-- z.;ý ))IHI IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD SlterPIant

V.C. Summer Unit I Weld Idenfilcatlon:

I-4300A-29 (DM Pro/Rev/Chg/lCN:

ISwT-PDI-AUTM1/I10/I Examination No.. ID-24RR Project No.: 13-1107 Weld

Description:

so-chNoJ-iD-su t2ý.-45, Device Configuration:

136-00045 Mod.Conf.:

138-00102 Scan Path Drawing: 134-00121 Exam Date .Examination Time Surface Temperature F.Data Acquisition Operator (9) 1 SNT Level: CaroHs R. Barberlno/iT' 25-Apr-14 Start End Start I Ed 1710 1820 80 80 Scan Controller Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller.

SG-NExT Lower Limit 71.30 71.30 Lower Limit 32.50 25.00 Beam Direction:

Cw/Ccw Scan: X Rotator Drive Uppe Limit 74.80 74.80 Upper Limit 66.34 66.34 Probe Type: PA22-001 Increment:

Y Axial Drive Inc. Interval (Resolution) 0.05 DCI (Scan Resolution) 0.05 Scanning Speed: 1.5 inches pa second Mode: Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans: 71 Scan Motion: Bi-directional Radius In. 15.52" Weld C/L: 71,74" Correction:

N/A I Elevation/Nozzle C/IL: N/A Master Acquisition File: DMPipe ID0 CW_180_CCWSkcw.acq Calibration Records: Examination Notes: Probe Channel/Angle(s)

Skew Sean Offset Step Offset Pipe Dianeter = 31.03" Probe I 1-(6048-gL) 0 + 27.77(in)

-2.04(in) 110003 Circumference

= 97,48" Weld

= 71.74 Probe 2 2-(60-88-L) 1800 + 37.21 (in) -2.04(in) 110003________________

_______________ -Examination Remarks: N/A N/A N/A NIA N/A N/A N/A N/A N/A N/A N/A N/A Dat A-0;al Increment

& Stan Positions Aeluai Recordable Indicationa Analyst Remarks Scan No(s) crement Position Scan Position Yes No N/A

Attachment:

SSalt Stop Stan Stop Channel1 0 0 0 71 71.30 74.80 25.00 66.34 Probe I Channel 2 3 ( a] El Yes E0 No Channel 3 0 0 0 Further Evaluation I Channel I [1 El Q Required: Probe 2 Channel2 D R) [1 Channel3 0 0 [] 0 Yes 0l No Channel I 0 01 0) Archive Media: Probe 3 Channel 2 -1 11 0_Channel 3 2l E ) " Extarnal Hard Drive Channel! l E__ _Probe 4 Channel 2 [] -0 (a 0 CD-ROM Channel 3 0 El 0 DVD-ROM Anyalyt/ SNT Lel /Date: Jesse R. Delgado /111/30 APR 2014 ISWT FOaRM N. (Ra, 1II1

)1"11" IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Sita/Piant:

V.C. Summer Unit l Weld Identification:

1.4300A.29 (DM) ProtRev/ChW1CN:

ISwT.PDI.AUTI It0/I Examination No.: ID-25 Project No.: 13-1107 Weld Description-so-c"C .No,--Sa 424fr-MS$)

Device Configuration:

136-00045 Mod.Conf.:

138.00102 Scan Path Drawin: 134-00121 Exam Date Examination Time Surface Temrerature OF Data Aequnition Operator (a) / SNT Level: Carlos It. Barberino/IT 25-Apr-14 Start End Start End 1538 164980 80* Dat .... .ioc --Scan Controller Parameters Increment Axis Planned Actual Sean Axis Planned Actual Positional Parameters Controller.

SG-NExT Lower Limit 71.30 71.30 Lower Limit 65.00 65.00 Beam Direction:

Cw/Ccw Scan: X Rotator Drive Upper Limit 74.80 75.00 Upper Limit 98.84 98.80 Probe Type: PA22-0D Increment:

Y Axial Drive Inc. Interval (Resolution) 0.05 DCI (Scan Resolution) 0.05 Scanning Speed: 1.5 inches per second Mode: Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans: 71 Scan Motion: Bi-directional Radius In. 15.52" Weld CIL: 71.74" Correction:

N/A Elevation/Nozzle C/IL: N/A Master Acquisition File; DMfPipejD 0QCWI 0 CCWSkew.acq Calibration Records: Examination Notes: Probe Cbannel/Anglek)

Skew Scan Offset Step Offset Pipe Diameter = 31.03'Probe I 1(60-88-L) 0° + 27.77(in)

-2.04(in) 110003 Circumferenoe 97.48" Weld Centerine

-71.74 Probe 2 2460-98-L) 1800 + 37.21 (in) -2.04(in) I10003 Examination Remarks: N/A N/A N/A N/A NIA N/A N/A N/A N/A N/A N/A N/A--Dat# Anly_.....

.Increment

& Scan Positions Actual Recordable Indications Analyst Remarks Scan No.(s) Increment Position Scan Position Yes No N/A

Attachment:

Start Slop Start SOP Channeli 0 0 El 75 71.30 75.00 65.00 98.80 Probe I Channel 2 El 0] 03 0 Yes 21 No Channel 3 El 0l 0 Further Evaluation Channel I El] G L Required: Probe 2 Channel 2 [1 91 []_Channel3 0l El 0 [3 Yes 2 No Channel 1 0 [] 0l Archive Media: Probe 3 Channel 2 E]Channel 3 El El 0 0 External HIard Drive Channell G1 LI 1 Probe 3 Channel 2 F[ 11 0 E CD-ROM Channel 3 0 El 0 DVD-ROM A n a ly st t S N T L e vel / D a te : J. R Jeset. DelgadoN/.1

/ 30 APR 2014 l5WT7FIRM N& 0750 (Zo illv l)

IImI SOUTHWEST TECHNOLOGIES AUTOMATjFD EDDY CURRENT EXAMINATION RECORD Site/Planl:

VC SUMMER UNIT I Weld identlflcation: (DM) 1-47 -.. Pro/REV/CbJICN:

ISwT-AET-3/2/0 Project No.: 13-1107 Wed

Description:

Ilnict Noz.-to-Safc End "C" Device Configuration:

136-00045

__alnaton

_o.: _T-! D-7_R Mod.Conf.:

138-00102 Scan Path Drawing: 134-00121 Exam Date Examination Time Surface Temperature 0 C Data Acquisition Operator (s) / SNT Level: I Start End Start End WILLIAM ANGELL/ 25-Apr-4 134 1350 68 68 Data Acquisition Scan Controller Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller ANT Lower Limit 71.30 71.30 Lower Limit 0.00 0.00 Beam Direction:

N/A Scan-: X Upper Limit 74,80 75.00 Upper Limit 33.85 26.00 ET Probe Size: .38 (in: Increment:

Y Incremcnin Interval 0.050 Resolution 0.020 Scanning Speed 1. 5/SE(Mode: Automatic Scan Conversion Counts 16000 Conversion Counts 885.54 Number of Scans, 71 Scan Motion: Bi-directional Conversion Units Inches Conversion Units Inches umzmh(Nozzle CM. 71.74 Correction:

N/A __vasio,.Voxde CIL NIA Module Parameters:

Calibration Records: Examination Notes: Status Channel(s)

Skew Scan Offset Step Offset Pipe dianker = 31.031 Probe I On 1-2 +22.51 5.35" -2.2 1" ET-03-VCS-04 Circumference

-97.48" Pmbe 2 On 3-4 -22.50 -5.35" -2.21". ET-03-VCS.04 Weld CIL= 71.74" Examination Remarks: Examination Remarks: Examination from 0 to 125'.-r -.---..........

-. ---- .I Increment

& Scan Positions Actual Recordable Indications Analyst Remarks Scar No.(s) Increment Position Scan Position Yes No N/A Atlachmcnl:

__an___.__)

Start Stop Stan Stop Probe I Channel 1 0 " f Res 0No.75 71.30 75.00 0.00 26.00 Channel 2 0 2 0 Furth erEvaluation Required: Probe2 Channel 3 0 Q 0I-Channel 4 03 0 0 EYes ONo Probe 3 Channel 5 0 0 E0 Archive Media: Channel 6 0 0D ED External Hard Drive Channel 7 0 0 2 0 CD-ROM Irobe4Channel 8 0] El 2 DVD-ROM Analyst / SNT Level / Date: WILLIAMMANCELL/1/

r I/ /15wTPFORMNO iv£T lawS Projec No. 13-110D7 ET-ID-23R Date: 25-ApriI-2014 bMM~~~U giUaT-Mods*04"

))AUTOMA 1f1 SOUTHWEST TECHNOLOGIES

.... ...........

.....D EDDY CURRENT EXAMINATION RECORD Site/Plant

VC SUMMER UNIT I Weld Identfication:

ElA / % (DM) I- -4TO V Pro/Rev/Cbh%0CN:

ISwT-AET-3/J0 Exmmlnation No.: ET-ID-24 R Project No.: 13-1107 Weld

Description:

Inict Naz..to-SafeEnd C" Device Conftgrotlon:

136-00045 Mod.Conf.:

139-00102 Scau Path Drawinl: 134-00121 Exam Dat Examination Time SurfaceTemperature OC Data Acquisition Operator (s) I SNT Level: 25-ApI-14 Start End Start End WILLIAM ANGELL / I A 1710 1520 63 68 Data Acquisition Scan Controller Parameters Increment Axis Planned Actual Sn is lanned c e MaF Positional Parsmeters ANT Lower Limit 71.30 7130 Lowe Limit 32.50 25.00 Beam Direction:

N/A Stan: x UpperLimit 74.80 74.80 Upper Limit 66.34 67.34 ET Probe Size: .38 (in Incment: Y Incremant Interval 0.050 Resolution 0.020 Scanning Speed I.5 "/" Mode: Automatic Scan Conversion Counts to 100 Number ofScans: 71 Scan Motion: Bi-direotional Couvrsion Units Inches Conversion Units inches Azimunmtwozle CI.L 71.74'Corrw¢ion; N/A E1evation/Nozzl CIL NIAI Module Parameters:

Calibration Records: Examinaldoo Notes: Status Channe(s)

Skew Scan Offset Step Offset Pipe diameter = 31.030 Probe I On 1-2 + 22.5* 5.356 -2.21" ET-03-VCS-04 Circunmfeence

-97.48*Probe 2 On 3-4 22.50 -5.35" -2.21" ET-03-VCS-04 Weld C/ip 71,74"_Examination Remarks: Examination Remarks:..,_ Examination from 120 to 245'.Increment

& Scan Positions Actual Recordable Indications Analyst Remarks Scan No.(s) Increment Position Scan Position Yes No N/A Altachment:

LfITED SCAN DUE TX RASF.D ARj 'X' OF 54,11TO Suet Stop Start Stop Prob I Channel 1 [a D Efes QNo lX0 OF 55.35, -Y" OF 71.09 TO "Y" OF 70.14 75 71.90 74.80 25.00 67.34 Channel 2 0 03 0 Further Evaluation Required: Probe 2 Channel 3 0 el 0 Channel 4 0 a 0 Dtes E'No Po__ _3_Channel 5 0 0 E) Archive Media:_____ 3 Channel 6 0 0 EBxternal Hard Drive Probe 4 Channel 7 0 -0 CD-ROM Channel 8 0 0 0 DVD-ROM Analyst I SNr Level I Date: WILLI.AM ANGELL fI III#f/ro" rr 16" r Project No. 13-1107 ET-ID-24R Date: 25-ApriI-2014 04"*J I H-T I[Hi SOUTHWEST TECHNOLOGIES AUTOMAT D EDDY CURRENT EXAMINATION RECORD Site/Plant

VC SUMMER UNIT I Weld Identification:

At N, 4 @A-4AA (DM) --Po/Rev/C CN: SwT-AT-3/2/0 exminao N ET-D25 Project No.; 13-1107 Weld Deserptton,:

Inlet No7_-t1q.Sal End "C" Device Configuration:

136-00045 Examination No.: ET-_D-2$Mud.CoRf.:

138-00102 Scso Path Drawing: 134-00121 Exam Date Examination Time Surface Temperature OC Data Acquisition Operator (s) /SNT Level: 25-Apr-14 Start End Start End WILLIAM ANGELL / 11 1538 1649 61 69 Data Acquisition Sean Controller Parameters lacrement Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller ANT Lower Lmit 71.30 71.30 Lower Limit 65.00 65.00 Beam Direction:

NIA Scan: X Upper Limit 74.80 74.80 Upper Limit 91.84 98.84 ET Probe Sizc: .38 (in'Increment:

Y Increment Interval D.050 Resolution 0.020 Scanning Speed 1.5 "SEC Mode: Automatic Scan Conversion Counts 16000 Conversion Cours 885.54 Number of Scans: 71 Scan Motion: Bi-directional Conversion Uniu Inches Conveion Units Inches AzimunihiNo.de CtL 71.74'Correction:

N/A _____to________

V1, NIA Module Parameters:

Callbration Records. Erxmination Notes.Status Channel(s1 Skew Stan Offset Step Offiet _Pipe dim'ntcr -31.03" Probe I On 1-2 +22.50 5.35" -221" ET-03-VCS-04 Circumference 97.48" Probe 2 On 3-4 -22.5? -5.35T -2.21 ET-03-VCS-04 Weld CIL- 71.74" Examination Remarks: Exmnmation Remarks:_Eaminuion from 24Q to 365" Increment

& Sean Positions Actual Recordable Indications Ann"_ _ Remarks Scan No.(s) Increment Position Scan Posilion Yes No N/A

Attachment:

SaNo__ Stlat Stop Sm Stop Probe I Channel 1 0 Q 0 Eres ONo 75 7130 74.80 65.00 98.94 Channel 2 0- R) 0 Furlher Evaluation Required:_ -_Probe 2 Channel3 0 0 0 Channel 4 0 E0 0 Eyes ONo Probe 3 Channel 5 [3 [0 Archive Media: Channel 6 0 0 E) 1 Emxternal Hard Drive Probe 4 Channel 7 0 0 [ 0 CD-ROM Channel 8 0 0 0 DVD-ROM Analyst / SNT Level / Date: WILLLAMANGELL/

It/iswrp N ro e.X it" Project No. 13-1107 ET-ID-25 Date: 25-Aprl-2014 mu mw *# tm -I qw uSO I* l InWE"ED ,E M =inITiIr,., 5"jIm Kra-. ,;I,, .. .... ...* k,,kflt.S°=mKT X. -Ma k.

S 6 3 6 3 452.6 cu. In.REQUIRED VOLUME-3D3.9 cu. In.AWAY PROBE MAXIMUM $CAN LIMI1I BY NOZZLE TAPER I DETAIL A SCALE 1:2 VOLUME (cu. In.) PERCENTAGE CW PROBE 452.6 1 100 I I tCWmppROp I A51-A I i no% I A 1 1OWA-RDS PRO8E I 4u2. 1 100% i IHI 8OUTHWEST TECHNOLOGIES

.....I .. ..,Ira w NOTE;THE SAME SCANS WERE RUN OH SG-A.SG-B, AND SG-C. HOT AND COLD LEGS COVERAGE PERCENTAGE 6 THE SAME FOR ALL NOZZLES VC, SUMMER STEAMWGENERATOR COVERAGE REPORT a 6 Y-YX 1 IHI Southwest Technologies Examination Summary Record Ufflityr South Carolina Efloc & SMte C. Summer Nudear Station Unit I GMs Outage: R-21 I Se" MM 00600 SY :m steem Generator UM " C" SG Out Noz-to-SE dentiftt=Man:

1-4300A-30 (M rMNUt" QValIrtlMn, Ealn ShOWt Met.od !C Examnatlon be"t NoWe_ No. K OUMur Remarks AUT 1SWT-P I-AUT11 01 UT Prbe 1 5o.-8) 110002 26-27 X -iJTTWD & AWY Exam AUT ISwT--'I-AUTI1/210r" UT Pbe 2 (W0M 110002 26-27 X -UT TWD & AWY Exam AUT ISwT-PI--AUT 11/2/0/1 Lrr Pmbe I (BGa.vj 110001 28-30 X UT CW & CCW Exam AUT ISWT-PDlI-AUT 11r2"01 urr Probe 2 (SO.08- 110001 28-30 X UT CW & CCW Exam AET ISwT-PDI-AET3/2J0/0 Er Probe 1 ew3-vcsO-I 26- 2B; 30 X Eddy Current Exam AET ISWT.PDI-AET312,1O FT Probe 2 ETDS-VCS-01 26- 28:30 X E-ddy Current Exam AET ISwT-PDI-AET3/2/0/0 ET Probe 1 Ero3-VCS1 29 -X One eddy current surlace Indication AET ISwT-PDI-AET3/2J010 ET Probe 2 E703-VCS-O1 29 -X recorded during exnnamlion 29 detahmined to be accepiable.

Examination Sunmary: This weld was examined from the Inside surface using SG-NExT. T-Ili. & MS5800 examination equipment.

The examination was limited due to the proximity of the nozzle taper. The examination coverage was 92%.No recorda"le UT indications were detected during this examination and one eddy~current surface indication was found to to be acceptable.

Th .is Indication was located- outside the examination area in the nozzle channel head cladding.P rep ared.By: S t.," J T n Signabire:

EMU qD [,t)e:,*0Proia _____ ____ ____V__ReviewedByI SC'/2L/I Lintw ~ Dt:V/~I

'I .I IHI SOUTHWEST TECHNOLOGIES LTAUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant:

V.C. Sumer Unit I Weld Identification:

I.4300A-30(DM)

Pro/Rev/Chg/ICN:

ISwT-PDI-AUTI 1/2/01 Examination No.: ID-26 Project No.: 13-1107 Weld

Description:

SG-"CoutNoaw-SE

((o-.t,) Device Configuration:

136-00045 Mod.Conf.:

138-00102 Scan Path Drawing: 134-00121 Exam Date Examination Time Surface Tern erature OF Data Acquisition Operator (s) SNT Level: Carlos H. Barberino/IT 26-Apr-14 St4r2 End Stao End______________________________________________1_

421 1451 80 80 Scan Controller Parmeters Increment Axis Planned Actual Scan Axis Planned Actual Positnul'Parametem Controller SO-NExT Lower Limit 71.30 71.30 Lower Limit 0.00 0.00 Beam Direction:

Twd/Awy Scan: X Rotator Drive Upper Limit 78.05 78.05 Upper Limit 50.10 50.10 Probe Type: PA22-001 Increrent:

Y Axial Drive Inc. Interval (Resolution) 0.15 DCI (Scan Resolution) 0.10 S canning Speed: 2.0 inches per second Mode: Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans: 46 Scan Motion: Bi-directional Radius In. 15.52" Weld C/L: 71.74" Correction:

N/A _Elevation/Nozzle C/L. N/A Master Acquisition Fie: DMPipeID_90_AWY_270_TWDSkew.acq Calibration Records: Examination Notes: Probe Channel /Angle(s)

Skew Scan Offset Step Otmhet Pipe Diameter 31,03" Probe I 1-(60-88-L) 900 + 70,34(in)

-1.29(in) 110002 Cirt nferncuI =97.48" Weld Centerline

= 71.74 Probe 2 2-460-88-L) 270" + 59.64(in)

-2.79(in) 110002 ExamInatIon Remarks: Probe 3 3-(0°Profilometry) 00 + 0.00(in) -2.04(in) 110002 N/A N/A NIA N/A NIA NIA 1 n n nn --.... nta A.n nra1p Increment

& Scan Positions Actual Recordable Indications Analyst Remarks Scan No.(s) Increment Position Scan Position Yes No N/A

Attachment:

n .SIMI Stop Start Stop Channel 1 0 0 El_ _ _ _46 71.30 78.05 0.00 50,10 Probe I Channel 2 0l El 0 0 Yes 01 No Channcl3 EC 0 0 Further Evaluation Channel I -0 0 Required: Probe 2 Channel?2 f" [] n-']Charnel 3 0 Q 01 C1 Yes G No Channel I 0 0 01 Archive Media: Probe 3 Channel 2 n r] 0l Channel 3 0 01 E] External Hard Drive Channel J 0 0 Probe 4 Channel 2 Fn 0 0I CD-ROM I Chmnel 3 E D 0 DVD-ROM Analyst I SNT Level / Dale: Je R. Deldo I 1 30 APR 2014 .N Jesse R. Urdi"eQ, (a3r, III])

..)IHI IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant:

V.C. Summer Unit I Weld ldentftication:

1-4300A-30(DM)

Pro/Rev/ChgICN:

ISwT-PDI.AUTl 1/2/0/1 Examination No.: ID-26A Project No.: 13.1107 Weld Description, so -cout (v0i SS°) Devitt Confliguration:

136-0005 Mod.Cotf.:

138-00102 Scan Path Drawing: 134-00121 Exam Date Examination Tlime SurfaceTermperahtreF Data Acquisition Operator (a) I SNT Level: Carlos H. Barberinlo/T 26-Apr-14 Start End Start End 1732 1804 90 80 Dsa-Acqahitn.

On__________

Stan Controller Parameters Increment AxiB Planned Actual Scan Axis Planned Actual Positional Parameters Controller SG-NExT Lower Limit 71.30 71.70 Lower Limit 0.00 0.00 Benmn Direction:

Twd/Awy Scan: X Rotator Drive Upper Limit 78.05 I 78.05 Upper Limit 50.10 50.10 Probe Type: PA22.001 lncrmemn:

Y Axial Drive Inc. inlgrval (Resolution) 0.15 DCI (Scan Resolution) 0.10 Scaming Speed: 2.0 inches per second Mode: Automatic Scan Conversion Units Inches Conversion Units Inches Number orScans: 46 Scan Motionj Bi-directional Radius In. 15.52" Weld C/L: 71.74" Correction:

N/A z EJevatiooNozzle C/L: N/A Master Acquisition File: DMPipe ID-9O.AWY_270_TWD...Skew.acq Calibration Records: Examination Notes: Probe Channel/Anple(s)

Skew Sean Offset Step Offset Pipe Diameter = 31.03" probe I 1-(60-89-L) 900 + 70.34(in)

-1.29(in) 110002 Circumference

= 97.48" Weld Centerline

= 71.74 Probe 2 2-(60-98-L) 270V + 59.64(1i)

-2.79(in):

110002 Examination Remarks: Probe 3 3-({0Profiiometry) 00 + 0.00(in) -2.04(in) 110002 N/A N/A N/A N/A N/A NI/A Dnta Analysis: Increment

& Scan Positions Actual Recordable Indications Analyst Remarks Scan No.(s) Increment Position Scan Position Yes No N/A Atlachment:

Start Stp Stan Stop Channel 1 0 0 42 71.70 78.05 0.00 50.10 Probe I Channel 2 0 2 0 -Yes 2 No Channel 3 0 0 0 Further Evaluation Channel 1 0 0 [] Required: Probe 2 Channel 2 E) 91 17 ChameJ 3 0 1] 0 0 Yes E No Channel 1 0 0[ Archive Media: Probe 3 Channel 2 1l 0 Channel 3 C0 0 El E] External Hard Drive_____ ___ _ __ __ _____ ____Channel 1 1: 01 [a_________

Probe 4 Channel 2 n 0 0 CD-ROM Channel 3 0 0 0 DVD-ROM Analyst / SNT Level I Date: /l11/30APR2014

-IS'WY 0M No. VIrT (Rw. 1111)

IHI... fi SOUTHWEST TECHNOLOGIES IAUTOMATED ULTRASONIC EXAMINATION RECORD Siteo anl: V.C. Summer Unit i Weld Identiflcation:

I-4300A-30 (DM) Pro/Rev/Ch&/ICN:

ISwT-PDI-AUTI1/2/0/1 Ex ti No.- ID-26B Pro jct No.: 13-1107 Weld

Description:

SOCOitNoz-to-SE 0.l-sv, Device Conf uration: 136-00045 Mod.Cof.:

138-00102 Scan Path Drawing 134-00121 Exm Date Examination Time Surface Temrnraturc OF Data AcquisitPon Operator (s) SNT Level: Carlos H4 .Brberino)IT 26--Apr-14 Start End Start End 1815 1844 go 80 ScaIncrem ent & S Incea n Axc s PlRnned Actaln Scan Axis Planned Actual Positional Parameters Controller SO-NEXT Lower Limit 71.30 71.30 Lower Limit 0.DO 30.01) Beam Direction'.

Twd/Awy Scan: X Rotator Drive Upper Limit 78.03 78.05 Upper Limit 50.10 50.10 Probe Type: PA22-001 Increment:

Y Axial Drive Inc. interval (Resolution) 0.15 DE C (Scan Resolution) 0.)0 Scanning Speed: 2.N inchN/ pArtst,, Mode: Automatic Scan Conversion Units Inches Conversion Unils Inches Nurnber oi'Scans:

46 Scan Motion: Bi-dinectiorW Radius In. 15.52" Weld CIL: 71.74'correction:

N/A Elevtion/Nozzle C/L: NIA Master Acquisition File: DMPipe ID 90_AWY_270 TWO Skew.ecq "airto eod:Examination Notes-Probe Channel /AnRIts) Skew Stan Offset Step Offset Pipe Diambe3 n 31.03 Probe I ]-(60-88°L) 900 + 70,34(in)

-1.29(in) 110002 Circumference

-97.48" Weld Centerline

= 71.74 Probe 2 2-460-88-L) 2700 + 59.64(in)

-C.-ROM110002 Probe 3 3-(0OProfilometry) 00 + 0.00(in) -2.04(in) 110002 N/A N/A N/A N/A NIA Increment

& Scan Positions Actual Recordable Indications Analyst Sa o( Increment Position Scan Position Yes No NIA

Attachment:

Start stop Stan Stop Channell C1 [] 0 46 71.30 78.05 30.00 50.10 Probe I Channel 2 ['] 12 0' 0- Yes 1") No Channel 3 0] 0" ID Further Evaluation Chaagel 1 [] [ Required: Probe 2 Channel 2 ["} Channel 3 13 0] f' Yes [] No Chum~l 1 0] 0 Archive Media: Probe 3 Channel 2 [] [0 [Channel 3 0) Q] el External "lard Nyie IChannl C] LOD Probe 4 Channel 2 n- [] 0][ CD-ROM Chaomel 3 0 DVD-ROM Analyst /SNT Level / Date:/ t .Jesse R. Delgado TI 1 30 APR 204 --ISW'r MeDaKNý, 50Re,. 1111). .

TIT..! IHI SOUTHWEST TECHNOLOGIES

&AA AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant:

V.C. Summer Unit I Weld Identification:

A-4300A-30 (DM) Pro/Rev/ChOICN:

JSwT-PDI-AUT 11/2/0/1 Examination No.; ID-27 Project No.: 13-1107 -Weld

Description:

tsmvwo-) Device Configuration:

136-00045 ModLConI.:

138"00102 Scan Path Drawing: 134-00121 Exam Date Examination Time Surface Temperalure OF Data Acquisition Operator (s) I SNT Level: Carlos H. Barbarino/IT 26-Apr-1 4 Start End Start End 1456 1541 so 8D........ ... .q u is ... ...... .... -... ..... .... .++ .; ¢Scan Controller Parameters Increment Axis Planned Actual Scan Axils Planned Actual Positional Parameters Controller:

SO-NExT Lower Limit 71.30 7130 Lowr Limit 48.47 48.47 Beam Direction:

Twd/Awy Scan: X Rotator Drive Upper Limit 78.05 78.05 Upper Limit 98.84 98.80 Probe Type: PA22-001 Increment:

Y Axial Drive Inc. Interval (Resolution) 0.15 DCI (Scan Resolution) 0.10 Scanning Speed: 2.0 inches per second Mode: Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans: 46 Scan Motion: Bi-directional Radius In. 15.52" Weld C/L: 71.74" Correcfton:

N/A ElevalionNozzle C/L: N/A Master Acquisition File: DMPipe_ID_90_AWY_270_TWDSkaw.acq Calibration Records: Examination Notes: Probe Channel/Angle(s)

Skew Scan Offset Step Offset Pipe Diameter 31.03" Probe I 1-(60-88-L) 900 + 70.34(in)

-1.29(in) 110002 Circumference

= 97.48'Weld Centcrline

-71.74 Probe 2 2-(60-886L) 270P + 59.64(in)

-2.79(m) 110002 Examination Remarks-Probe 3 3-(0*Proiilometry) 0D + 0.00(in) -2.04(in) I 10002 N/A N/A N/A N/A N/A N/A Data Analysis increment

& Scan Positions Actual Recordable Indications Analyst Remarks Scan No.(!) Increment Position Scan Position Yes No N/A

Attachment:

Start stop Start Stop Channel 1 01 0]46 71.30 78.05 48.47 98.80 Probe I Channel 2 0 3 0 0 Yes 0 No Channel 3 0 0 9 Further Evaluation Channel I 0 0 0 Required: Probe 2 Chnnel 2- El .M n Channel3 0 0 0 0 Yes [ No Channel 1 0 0 0 Archive Media: Probe 3 Channel 2 [] R Channel 3 0 El 0 External Hrd Drive Channel 1 0] 0 Probe 4 Channel 2 [7l 0] 0] 0 CD-ROM_Channel 3 " 0 -0 ] DVD-ROM Analyst / SNT Level / Date: Jesse R. Delgado/ 111/30 APR 2014 IS*1 OaM Nm urs 5f at. V111)

IHI" IHI SOUTHWEST TECHNOLOGIES

,,, AUTOMATED ULTRASONIC EXAMINATION RECORD Sitce/Plant:

V.C. Summer Unit I Weld Identification:

I.4300A-30(DM)

Pro/Revl/Chb CN: ISwT-PDI-AUTI 1/2/01I Examination No.: ID-27A Project No.: 13.1107 Weld Descripion:

.

1u-35) Device Confi ration: 136-0004S Mod.Conf:

138-00102 Scan Path Drawing: 134-00121 Exam Date Examination Time Surface Tem2!ratureOF Date Acquisition Operutor (s) t SNT Level: Caruos H. Barberino/IT 26-Ap-14 Start End Start End P555e 1613 80 s)Scan Cotroller Parameters Increment Axis Planned Actual Scan Axis Planned Actual PositionalParameters Con~troller:

SO-N&xT L.ower Limit 71.30 71.30 Lower Limit 49.47 5D.00 Scamo Damxton: Twd/Awy Scan: X Rotator Drive Upper Limit 78.05 78.05 Upper Limit 98.84 63.00 Probe Type: PA22-001 Increment:

Y Axial Drive Inc. Intrvai (Resolution) 0.15 DCI (Scan Resolution) 0.1l0 Seartning Speed: 2.0 inches per second Mode: Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scs: 46 Scan Motion: Uni-dicCional Radius In.3 15.520 Weld CEL: 71.74" Correction:

N/A El,,vaionNo.,le vu. N/A MagewrAcquisition File- DMPipeID _90_AWY 270 TWDSkew.acq Calibration Records- Examination Notes;Probe Channel IAnkle~s)

Skew Scan Offset step Offset P0ipe Dimetr = 31.03" Probe I 1-(60-88-L) 90, + 70,34(in)

-1,29(in) I 1002 Circumference

= 97.48" 1 1 Weld Centerline

= 71.74 P r/obe2 2-460-g8-L) 270° + 59.64(in)

-2.79(in) 110002 E a i ai nR m r s Probe 3 3-(00Profilometry) 0* A- 0.00(in) -2,04(in) I WON0 N/A NWA N/A N/A M/A N/A Increment

& Scan Positions Actual Recordable

]odicatio-s; Analyst Remarks Scan No.(s) Inerement Position Scan Position Yes No N/A Attachmen::

Start stop Start Stop Channel I -1 ID 46 71.30 78.05 50.00 63.00 Probe I Channel 2 0 17D 07 [ Yes B7 No Channel 3 0" 1-1 [] Further Evaluation Channel 3 0 0 0 Required: Probe 2 Channel 2 Q] 2 [-Channel 3 El [] ID [] Yes El No ChaAnyel / 0- Archive Media: Probe 3 Channel 2 0-N 13 El Charnel 3 Q] 0I El External Hard Drive Channel I p- ['- 1"D Probe 4 -Ch~annel 2 M 2] [] 0 CD-R.OM CharmeJ 3 [ [ DVD-ROM An nlyst ISNT L evel I Date; Je sse R. Delgado 1111I/30 APR 2014 t -'SbW'rYrolM N& UTVr,0 (Rf. 1111) 1)IHI I1I SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Sits/Plant:

V.C. Summer Unit I Weld Identification:

1-4300A-30 (DM) Pro/Rev/Ch nCN: ISwT-PDI-AUTl I /2JO/ Examination No.: ID-27B Project No.: 13-1107 Weld Dewription:

ino-3m Devlce Con figuration:

136-00045 Mod.Conf.:

13"-00102 Scan Palh Drawing: 134.00121 Exam Date Examination Time Surface Temperature OF Data Acquisition Operator (i) SNT Level: Carlos H. Brberino/T 26-Apr-n14 Sta rt End Start End 1 16.28 1717 80 so Scan Controller Param eters Inerement Axis Planned Actual Scao Axi Planned Actual Positione Parameters Controller SO-NEXT Lower Limit 71.30 71.30 Lower Limit 48.47 48.00 Beam Direction:

Twd/Awy Scan: X Rotator Drive Uppe Limit 78,05 78.05 Upper Limit 98.84 98.80 Probex Type: PA22-001 Incremnnt:

YAxialrDrive Inc. Interval (ResoluiohJtion) 0.10 ScanningSpeed:

2.0 inches per secone Made: Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans: 46 Scan MotionC Uni-dir3ctional Radius In. 15,52" xWeld CDL: 71.74 C~m'cio: N/A -Bevafion/Nozzle CIL: NIA Mastr Aqaiitin Pi: D Fiejlý 9AWY 70 WD kewacqExamination Notes: wCalibration Records.Probe Channel2/Aeis)

Skew Scan Offset Step OCiRetm Probe I 1 -(60-98-L) 9V ° + 70.34(in)

-1,29(in)

] 10002 Circumferenc 9 7.4 8" Weld Centerline

= 71.74 Probe 2 270° + 59.64(in)-

2.79(in) 1 ]0002 EaiainRmrs Probe 3 3-(0OP mrfilometry) 0 ° + 0.00(in) -2.04(in) 110002 N/A NIA N/A N/A 7 -NIA " NIA Increment

& Samn Positions Actual Recordable Indications Analyst Remarks Sa o9 Increment Position Scan Position Yes "No N/A

Attachment:

Start Stop Stan Stop Channel 1 0 0 0D"R 46 71.3D 78.05 48.0D 98.80 Probe I Chamel 2. 0] 0 [] I-1 Yes 2] No MChannel 3 0 ] [ Further Evaluation Channel I Required:-

Probe 2 ChSNTl 2- 0e nl/at ChannelJ3 es 0. 1D1 0 Yes El No Channel F OR l .1 Archive Media: Probe 3 Channel 2 171 El Channel 3 [] 0- TI Externa Hard Drive Probe 4 Channel 2 n [] [] [ CD-ROM Channel 3 r-0 [] [ DVO-ROM Analyst I SNT Level I Date: JseR egd 1 0AR21 ISwTrFORM N06 UTSO (RL". 1111)

IHI" IHI SOUTHWEST TECHNOLOGIES IAUTOMATED ULTRASONIC EXAMINATION RECORD SitePlant

V.C. Summer Unit I Weld Identifteation:

1-4300A-30 (DM) Y Pro/Rev/Chp/

CN: ISv/r-PDI-AUTI I/2/0/I Exmnatlon No.. ID-28 Project No.: 13-1107 Weld

Description:

90-C'OuINvyz-.S1 (oý-l2S) Device Confiuration:

136-00045 Mod.Conf.:

138-00102 Scan Path Drawinp: 134-00121 Exam Date Examination Time Surface Tem erature OF Data Acquisition Operator (s) /SNT Level- Bryan Wright/11 26-Apt-14 Start End Start End 0300 351 so go Dat i~cu zsl o Sewn Controller Parameters Increment AxiP Planno Actual ed can Axis Plan Actual Positions]

Parameters Controller:

SO-N&xT Lower Limit 71.30 71.30 Lower Limit 0.00~ 0.00 BSam Dire-ction:

Cw/CcwV ScCn: X Rotator Drive Upper Limit 74.80 74.85 Upper L 0im 318 33.85 Probe Type: PA22-001 Increment:

Y Axial Drive Inc. Interval (Resolution) 0.05 DCI (Scan Resolution) 0.05 Scanning Speed: 1.5 inches per secowd Mode: Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans: 71 Scan Motion: Bi-dbctionaC Radius en. 15.52" Weld C/L: 71.74" Conrectionl:

N/A Elevation/Noz~zle CJL: N/A MasterAeqnisition File: DM Pipý.lD-0 CW 180 CCWSkew.&cq Calibration Records: Exeriamltien Notes;Probe Channel IAnglePs)

Skew Scan OfCset Step Oler Pipe Diam = 31.03" Probe l )-(60-88-L) 0p C 27.77(in) 2.04(in) 110001 Circumfeence

-97.48" Weld Centerline

= 71.74 Probe 2 2-(60-88°L) 1 g0 0 + 37.21(in)

-2.04(in) 110001E a in to R m r s Analyat /top SNTn Ltoe D0 72A 71.3 74.A 0.IA 33.8 PrbN/hnnl2 0A1 e lN Scanj No.3 e P o Qa P Yes E" N/St tp S~ tpChwrmel 1 0- 0 G3 Arhv Mda 72 7130 7.85 .00 3.85 Probe 3 Channel 2 [] 0 ID1[ e ] N Channel 3 13 " : ] El F ErthernEalHard riv Channel 1 1 Reued Probe 4 2 n: El f-C-RO roe3 Channel 3 [] 0] DVDRSNT Level I Date: 1W'r FORKlL N&. TIrrs (new.'JI i}

)tct.~tTdnIo§i.

IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant:

V.C. Summer Unit I Weld Identification:

1-4300A30 (DM) Pro/Rev/Chg/CN: )Sv/r.PDI-AUTI 1/201 Examination No.: ID-29 Project No.: 13-1107 Weld

Description:

Co-c-o ,-S 120.24o-s Device Conriguratlon:

136-00045 Mod.Coilf:

139-00102 Scan Path Drawing- 134-00121 Exam Date Examination Time Surface Data Acquisitlon Operator (s) SNT Level: DryanWright/II 26-Apr-14 Start End Start End 0425 0512' 80 80 Scan Controller Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller:.

SG-N&T ýLower Limit 71.30 71.3D Lower Limnit 32.50 32.50 Beam Direction:

CwlCcw Sc~an: X Rotator Drive Upper Limit 74.80 74.80 Upper Limit 66.34 66.34 Probe Type: PA.22-001 Increment Y Axial Drive Inc. Interval (Resolution) 0.05 DCI (Scan Resolution) 7.05 Scanning.Sp74 1.5 inrhes per second Mode: Automnatic Scan Conversion Units Inches Conversion Units Inches N umber of Scams: 71 Scan Motion: Bi-directional Radius In. 15.52" Weld CxL: 7Rmr.74" Correction:

N/A ElevationNozzle CALA NAA Master Acquisition File; DMPipe jD 0 CW Ig0 CCW Skew.aoq Calibration Records: Examination Notes-Probe Channel /Angles) Skew S Pn Offset Step Offset Pipe Diameterbe 31.03" Probe I 1-(60-88-L)

O+ 27,77(in)

-2.04(in)

Circumference 97,4" Weld Centerline

= 71.74 Protbt 22-(0-9-L 1Pro C 2 I WOW Exa4nai) C Remar Increment

& Stan Positions Actual 'Recordable Indications Analys! Remarks Scn[.s ncremaeni Position Sewn Position Yes No N/A

Attachment:

caN.() Start I Stop Sion Stop Channel I El El 0]72 71.30 74.80 32.50 66.34 Probe I Channel 2 [0 [] 0 [:3 Yes El No Channel 3 [] 0 21 Further Evaluation Channel 1 0 0 Q Required: PAabt 2 C/anSlN2 Lv D 0t Chasne 3. [lad /11 el 0 APR CD014 Channel 1 [ G1 Archive Media: Probe 3 Chanel 2 E] 13 Channel 3 r-I Q] 2 2 External Hard Drve Chanel I n] El1 2)Probe 4 .,Choannl 2 n- El MY 0 CD-ROM Channel 3 0-- 0] [ DVD-ROM`Annalyt ISNT L.evel D ate: Jesse R, Delgado 111! 30 APR 2014 __ lf JsW~rJVoIm N.. tr so (Aý. [III1)

IH I 111 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORD Site/Plant:

V.C, Simnmerlnil I Weld ]dentification:

1-4300A-30 (DM) ProIRev/ChRACN:

ISwT-PDI-AUTI I/20/1 Examnation No.: ID-30 Proect No.; 13- 1107 Weld

Description:

so-c-oniww-s.$

(.2a-y. Devkt Configuration:

136-00045 ModCoof: 138-00102 Scan Path Drawing: 134-00121 Exam Date Examination Time Surface Temperaure OF Data Acquisition Operator (s) /SNT Level: Carlos H. Barberino/IT

.26-Apr- 14 Start End Start End ii322 1355 80 80 Scan Controller Parameters Increment Axis Planned Actual Scan Axis pianoe Actual Positioml Parameters Controller:

SG-NExT Lower Limit 71.30 71.30 Lower Limit 65.00 65.0D Beam Direction:

Cw/Ccw Scan: X Rotator Drive Upper Limit 74.80 74.80 Up0 Limit 98.84 99.D4 Probe Type, PA22-001 Increment:

Y Axial Drive Inc. Interval (Resolution)

D.05 DCI (Scan Resolution) 0.05 Scanning 5peed: 1. 5 inches per second Mode: Automatic Scan Conversion Units Inches Contversion Units Inches Number of Scams: 7 1 Scan Mation: li-dtrectona)

Radius In. 15.52L Weld C/L: 71.74" Correction:

NIA IblevatiodNoA CAL: N/A Master Aequistlon File: DM_Pip_ýD 0 CW 180 CCWSkew.acq Ca libration Records: Examination Notes: Probe Channel /Anltle{_s)

Skew Scan Offset Step Offset _Pipe 31.03" Probe I t-(60-990L) 0o + 27,77(in)-

2.04(in)" .10001 Circarnfer-oe=

97.48" Weld Centerline

= 71.74 Probe 2 2-(60-88 -L) 1 W0 + 37.2 1(in) -2.04(in) 11000 1 x m n ton R m r s NIA N/A N/A NIA N/A KIA N/A NIA N/A N/A 7 -NIA N/A._Imcrament

& Scan Positions Actual Recordable Indications Anelyst Remarks Scan No.(s) Increment Position Scan Position Yes No NIA

Attachment:

Start Stop Star't Slop Channel 1 ED Q][72 71.30 74.80 65.00 98.84 Probe I Channel 2 [ a [E [ [ Yes 21 No Channel 3 0] [] E Further Evaluation Channel 1 0' -r0 Reqtuird: Probe 2 Channel 2 [j 91 1 Channel 3 0] 1) El ] Yes No Channel 1) 0 .[ [ Archive Media: Probe 3 Channel 2 El ED [Channel 3 [D 2 " "1 [" External Hard Drive Chantnel 1 1]. El El Probe 3 Channet 2 07 0

3[ CD-ROM 1Channel 3 0] 0- DVD-ROM Analyst ISNT Level D ate;JseR egao113 P 16W1" 0RM Ni,6 71"MO (ReJ. 1t I ..

I H IT IHI SOUTHWEST TECHNOLOGIES AUTOMA11%D EDDY CURRENT EXAMINATION RECORD Sit./Plant:

VC SUMMER UNIT I Weld Identification:

1 +'00A-&l (DM) I. Pro/Rev/ChV/ICN' ISWT-AET-3/2/0 Examination No.; ET-ID-26 Project No.. 13-1107 Weld

Description:

jOutlct Noz_-to-SafeEnd TC" Device Configuration:_

136-00045 EaiainN, ,T]D2 Mod.Conf." 138-00102 Scan Path Drawing: 134-00121 Exam Date Examination Time Surace Tem perature OC Data Acquisition Operator (a) / SNT Level: 26-Apr- 14 Start End Start End WILLIAM ANGELL/II 1421 1451 63 68 Data Acquisition Scan Coatroller Parameters Increment A"s Planned I Actual Scan Axis Planned Actual Positional Parameters Controller ANT Lower Limit 71.30 71.30 Lower Limit 0.00 0I00 Beam Direction:

N/A Scan: X Upper Limit 78.05 71.30 Upper Limit 50.00 50.00 UT Probe Size: .39 (in)[ncrement:

Y Increment Interval 0,150 Resolution 0.020 ScanningSpeed I.S '7SEC Mode: Automatic Scan Conversion Counts 16000 Conversion Counts 559 Number of Scans: 46 Scan Motion: Bi-directional Conversion Units Inches Conversion Units Inches Azimunth/Nmole CIL 76.03" Cotrection:

N/A _ __ EIevnon/NozJe CIL N/A Module rammeters:.

Calibration Records: Examination Notes: Status Channel(s)

Skew Scan Offset Step Offset Pipe diameter -31.03" Probe I On 1-2 + 22,5* 5.35" -2.2 1" ET-03-VCS-01 Circumferencc=97.48" Probe 2 On 3-4 -22.5 -5.35" -2.21" ET-03-VCS-01 Weld C/L= 76.03" Examination Remarks: E_ xamination Remarks: Examination fmor 0 to ISO"." ..,f-i,. ... -- -,. -. ... " Increment

& Scan Positions Actual Recordable Indications Analyst Remarks Increment Position Scan Position Yes No N/A Attachment-.

PROB LIFTED UP, SEE EXAMINATION ET-ID-26R Scan No(s) Start Stop Star Stop Probe I Channel 1 0- El 0 Eles QNo 46 71.30 78.05 0.00 50.00 -Channel 2 0 0 ID Further Evaluation Required: Pfobe 2 Channel 3 0 0 0 ..Channel 4 0 0 0 E Des QNo_Probe 3 Channel 5 [] 0 Archive Media: .....Channel 6 0 0 0 0 External Hard Drive Probe 4 Channel 7 0 0 0 0 CD-ROM Channel 8 0 Q3 2 DVD-ROM_Analyst / SNT Level / Date: ISWT FORM N& ID r I'w" w Project No. 13-1107 EXAM ET-ID-26 Date: 26-ApriI-2014 Ent"I M 3 1 tramn~'L*BV

~L~S WE UDwsiiI1f" ~ -__ _____U -U A x WSm m 111H I IHI SOUTHWEST TECHNOLOGIES

...... , .. C. UNAUTOMAVED EDY CURRENT EXAMINATION RECORD'Plam VC SUMMER UNITl Weld Identifica 1DM -4t A , Pro/Rfv/ChW[CN; LSwT-AET-3/2/0 KT-ID46R ProJect No.: 13-1107 Weld DertIon: [Outlet Noz-to-Safb End "C" Device ConflruMtlon:

136-00045 138-00102 Scan Path Dr win. 134-00121 Exam Date Exmumizuion Time Surface Temperoturt C Data Acquiasllon Operator (a) / SNT Level. 26-Apt-14 Start 8nd Start Lad WILLIAM ANGELL/ nl 1732 1304 68 68 Data Acquisition Scan Controller Panamrtau Increrni Axis Planned Actl Scan Axis Planned Actual PosElonal Parameter Controlkr.

ANT 5M Limk 71.30 71.30 Loew Lirmit 0.00 0,00 Beam Direction:

N/A Scan: X Uppe Limit 73.05 71.30 Upper Umi 50,00 50.00 ET Probe Si7e: .38 (in)Inmemcnt Y Increment Interval 0.1 50 Resolution 0.020 Scanning Speed Ll I/SC Mode. Automatic Scan Conversion Counts 16000 Conversion Counts 558.54 Number of Scans: 46 Scan Motion: Bi-dircotional Convmion Units Inches Convesion Units Inches AzimnAh/No=lcC/L 76.03 Correction:

N/A El__ov___No__leCL N/A Module Parameters:

Calibration Records: Blateirtaion Notes: 8Mtw Clhnnel(a)

Skew Scan Offset Stepoffset

_Pipe diameat -31.031 Probe I On 1-2 +22.5, 5.35* -2.2 1" ST-003-VCS-01 Circunfrenc

= 97.4r Probe 2 on 3-4 -22.5 -5.5" -2.21" ET-003-VCS-01 Weld C/L- 76.03" Usm~natio ew lrnksm_Examation Rearks:__Ernamtion from 0 to 180"._nrccote & Soan Positions Actal Recordable Indications Analyst Remarks Scan No.(s) nme-it Position Scan Yes No N/A

Attachment:

__an s Stop Sht Stop Prob I Channel 1 0 0 0 (Yes ___No 46 71.30 79.05 0.00 50.00 Channel 2 0 [3 0 Forler Evaluation Requbed: Probe2 Channel23 0 2 0 Channel4 0 0 0 Or'es SNo Probe3 Channel5 0 0 0 AmjhiveMedia:

Channel 6 0 0 ] 0 External Hard ive Probe 4 CheniU 7 0. 0 01 0 CD-ROM Channel 8 O____0_ DVD-RO___nrmlyst/ S Level I Date: WILLIAM ANGRLI, I II /B low' No.m I,'T lemI Project No. 13-1107 EXAM ET-ID-26R D~ate: 26-April-2014 ,aidUIE0U- "t 0 oe wwfi'i~m~l--a I IF-I 1111 SOUTHWEST TECHNOLOGIES AUTOMATMD EDDY CURRENT EXAMINATION RECORD Site/Plaint:

VC SUMMER UNIT I Weld ldeutlatlont,, I Ai.4 A al (DM) ] L. Pr&Rev/CbWICN:

iSwT-AET-3r2M0 Examination No.: .T-ID-27 Project No.: 13-1107 iWeld Dwrlption; iOutlet Noz.-o-Saft End "C" Device Configuration:

136-00045 Mod.Conf.:

138-00102 Scar Pith Drawing: 134-00121 Exam Date Exominution Time Surface Tent erature OC Data Aequisition Operator (s) I SNT Level: 26-Ap¢-14 Start End Start End WILLIAM ANGELL / --1456 1541 68 68 Data Acquisition Scea Controller Parameters Increment Axis Planned Actual Stan Axis Plaooned Actual Positional Parameters Controller.

ANT Lower Limit 71.30 71.30- Lower Limit 48.47 48A7 Boem Direction:

N/A Scan: X Uppe Litrn 78.05 73.05 Upper Limit 9..84 1 8.34 E"T Probe Size: ,38 (in)Inremenc Y Increment Interval 0.150 Resolution 0.020 Scaning Speed 0 5 ,16C Mode: Automatic Scan Conversion Counts 16000 Conversion Counts 558.54 Number of Scans: 46 Scan Motion: Bi-directional Conversion Units Inches Conversion Units Inches Amunth/tioz CIL 76.03'orrection:

N/A ______ _ C/I. N/A Module Parameters:

Calibration Records: Examination Notes: Status Chanoel(s)

Skew Scan Offset Step Pipe diameter -31,03" Probe I on 1-2 +22.50 5.35" -2.21" ET-003-VCS-Oi Circumference-97.48" Probe 2 On 3-4 -22.5 -5.35" -2.21" ET-003-VCS-0I Weld C/L- 76.03" Examlna tion Remarks: Exreinatmon Remeaft: Examination from i80 to 3W0.Increment

&Seai Poatioas Actual Recordable Indications Analyst Remarks SInremet Position Scan Position Yes -No -N/A

Attachment:

scan o.(s) Channel 1 0 ) 0 EYes 0 No 46 71.30 78.05 48.47 98.84 Channel 2 0 0. 0 Further Evaluation Required: probe2 Channel 3 0" 0 0-Channel 4 0 0 0l Ores ON_,,,,_Probe 3 Channel 5 0 0 E9 Archive Media Channel 6 0 0 0 0 External Hard Drive Probe 4 Channel 7 0 0 CD-ROM Channel 8 0 (] 0 DVD-ROM Analyst / SNT Level / Dale: WILLIAM ANGELL/I It/ 4 ~ > ~ ?~IsWT FORMM ,t"1 IN"/

Project No. 13-1107 EXAM ET-ID-27 Date: 26-April-2014 Ff, tsnoMW"ýum vw n.it. " A A A PR- '9#Uem9gE..~

~.I.I~-g ~ ~l MlwIwU 1*I I a-TT-TT IR SOUTHWEST TECHNOLOGIES

.. -... 1........

AUTOMAtD EDDY CURRENT EXAMINATION RECORD Site/Plant.-

VC SUMMER UNIT I Weld Ideatlflcatlos'.A U.-4400"-N (DM) 1-t;CA -DrfZ Pre/Rev/ChgflCN:

ISwT-AET-3a2/0 Examinaton No.: ET-ID-28 Projetct No.: 13-1107 Weld Deseelpfloit:

tOugtle Nom..o-sef End "C"w Device Configuraiton:

136-00045 ModCoant 13"00102 Scan Path Drawln: 134-00121 Exam Date I Examination Time SurfaceTemrperatureC Dat Acquisition Operator (s)/ SNT Level: 26-Ap-14 Start End Start End KARLSHAFWIR/I1 0300 0349 68 68 Data Acquisition Scan Controller Parameters Increment Axis Planaed Actual Stan Axis Planned Actual Posillional Parameters Coatmlle, ANT Lower Limit 71.30 71.30 Lower Limit 0.00 0.00 Beam Direction:

N/A Scan: x upper Limit 74.80 74.80 Upper Limit 33.85 33.35 l'T Probe Size: .38 (m)Increment:

Y Increment Interval 0.050 Resolution 0.020 Scanning Speed 1.5 ISEC Mode: Automatic Scan Conversion Counts 16000 Conversion Counts 553.54 Number ofScans: 71 Scan Motion: Bi-directional Conversion Units inches Conversion units Inches AzimuvmtWNozak C/L 76.03'Correction:

N/A _Jeyujl0zJ C/L WA Module Parameters:

Calibration Records: Examination Notes: Status Channls) Skew Scan Offset Step Ofi Pibp diameter -31,D3" Probe I On 1-2 +22.50 5.36" -2.21J" ET-03-VCS-01 Circumference

-97.48'Probe 2 On 3-4 -22.50 -5.35W -2.2 1 ET-03-VCS-01 Weld CAL- 76.03'Ere mlruation Remarks: Examinaion Remarks: Exanxnioft from 0 to MO.Increment

& Scan Positlons Actual Recordable Indications

-_Analyst Remarks Scan No.(s) InClemen Position Scan Position Yes No N/A Attachmen.:

PROBE I WAS LIFTED OFF. AREA COVERED BY Start Stop Staru Stop Probe I Channel 1 13 C) 11 EWes (2) No BY EXAMINATION

ET-ID-26 75 71.30 74.80 0.00 33.85 -Channel 2 0 0 0 Further Evaluation Required: Probe2 Channel3 0 0, 0[Channel4 D 0 0 Ores ONo Probe 3 Channel 5 0 0 0 Archive Media: Channeot 0 0 @ @ External Hard Drive Probe 4 Channel 7 0 0 0 0 CD-ROM Channel 8 0 0 0 DVD-ROM Analyst / SNT Level / Date: WILLIAM ANGELL/ 11 / ý ~ AW 5/N. i 100 , /

Project No. 13-1107 EXAM ET-ID-28 Date: 26-April-2014 LOcs== =m an -t_ U-, ?, ..I Ak A MII SOUTHWEST TECHNOLOGIES AUTOMATD EDDY CURRENT EXAMINATION RECORD Sltelplant:

VC SUMMER UNIT I Weld Idenffll limon:, ,,(DM)I- A- Prr/ReV/ IC0N: LSWT-AET-3/E a : Project No.: 13-1107 Weld

Description:

I Outlet Noz.-1-Saf End "C" ievice Coa fllurdon:

136-00045ton No.: ET-D-29 Mod.Conf.:

138-00102 Scan Path Drawing; 134-00121, sum Date 9gminiontlon Time Surface Temperature Data Acquisition Operator (s) / SNT Level: N -SlI End Start dnd KARL SIAFFL Ill I- -0415 0515 68 69 Data Acquisition Scan Controller Parameters Increment Axls Planned Actual Sean Atis Planned Actual Poastional Parameters Controllem.

ANT Lower Limit 71.30 71.30 Lower Limit 32.30 32.50 Beam Direction:

N/A Scan: X Upper Limit 74.30 74.80 Upper Limit 66.34 66.34 ET Probe Size: 38 (in)lcrerment:

Y Inhcirment Interval 0.050 Resolution 0.020 Scanning Speed L5s ,sec Mode: Automatic Scan Conversion Counts 16000 Conversion Counts 5S8.00 Number of Scans: 71 Scam Motion: Bi-directional Conversiom Units Inches Conversion Units Inches AzImwAWth zzle C/L 76.03" Correction:

N/A El-vatiou ule C/IL N/A Module Parameters:

Calibration Records: I1xamlomtlou Notes: Status Chasinec(s)

Skew Sean Offset Step Offset Pip diamete -31.03" Probe I On 1-2 +22.50 5.35" -2.210 ET-03-VCS-01 Ciwumnforene"-97.48" Probe 2 On 3-4 -22.50 -5.35" -2.21" ET-03-VCS-01 Weld C/LA 76.03" Examination Remarks: Examination Remarks: Examination firm 120 to 24?*, Increment

& Scan Positlons Actual Recordable Indckttlons Analyst Remark Scan No.(s) Incremem Position Scan Position Yes No N/A

Attachment:

INDICATION AT "X" OF70.15 AND 'Y" OF 69.29 WITH LENTH Scan Start stop Start Sop Probe I Channel 1 0 0 0 pnYes rn No OF 0.38 INCHES, SURFACE INDICATION 75 71.30 74.80 32.50 66.34 Channel2 p) [ [] Further Evaluation Kequird: Prbe 2 Channel 3 ] aj Channel 4 0 [] ) 0 -'es n, No P.o_ 3 Channel 5 o o (D Archite Media: Channel 6 0"9 0 (" E External Hard Drive Probe4 Channel7 -o E- 0 CD-ROM Choann 8 -3 ........ DVD-ROM lysi /SNTLevel/Date:

WILLIAM ANGELL / It/sswTr No, r tlow-( "" t r

/ I )Project No. 13-1107 EXAM ET-ID-29 Date: 26-Aprik2014 WW1I ON".MWNWA tjfg 3*E"W-STOmUMI JIM~u1 4-40 -a Project No. 13-1107 EXAM ET-ID-29 Date: 26-Aprl-2014 S£1O4wijku~s I

Project No. 13-1107 EXAM ET-ID-29 Date: 26-April-2014

_ Sl IjjFO oiiira 4-7 jOWIi.; -gp'n~m____ ____ ____ K ft-, 4--k a P~p0.~1.at

)IT {I i111 SOUTHWEST TECHNOLOGIES

.AUTOMATD EDDY CURRENT EXAMINATION RECORD Sitelplant:

VC SUMMER UNIT I Weld Identlflentlon:-A, 4 (DM) .'/'Pro/RevlCbh/ICN:

ISwT-AET-3r2/0

_ Examination No.: ET-ID-30 Project No.: 13-1107 Weld

Description:

1Outlet NoL .to-Safe End "C" Device Configuralion:

136-00045 Mod.CoSL:

133-00102 Scan Path Drawlng. 134-00121 .Examt Date .Examlnation Time Surfaee Temperature 9C Data Acquisition Operator (s) f SNT Level: 26-Apr-14 Start End Start Led WILLIAM ANGELL/ 11 1322 1355 63 Data Acquisition Scan Controller Parameter, [lurement AxIs Planned Actual Scan Axis Planned Atetal Posltional Parameters C oller: ANT Lower Limit 71.30 71.30 Lower Limit 65.00 65.00 Beam Direction:

N/A Scan: X Upper Limit 74.10 74.90 Uypg Limit 918.4 98,84 ET Probe Size: .31 (in)Increment:

Y Increment Inturval 0.050 Rcsolution 0.020 ScanningSpeed 1.s "ISEC Mode: Automatic Scan Conversion CoUnts 16000 Conversion Counts 553.00 Number of Scans: 71 Scan Motion: Bi-directional conversion Units Inches Conversion Units Inches Azlmunf/WNozze CML 76.03'Corrction:

N/A Elevation/Nozzke Cn N/A Module Parameters, Calibration Records: Examination Notes: Status Channel(s)

Skew Scan Offset Step Offset Pipe diameer w 31.03" Probe I On 1-2 +-22.5, 5.35" -2.21" ET-03,VCS-01 Circumfrence

= 97.48" Probe 2 On 3-4 -22.5' -5.35" -2.21" ET-03-VCS-0I Weld C/L= 76.03" 1355 Examination Remarks: Examination Remarks:_Examnation from 240 to 365'.Increment

& Scan Positions Actual Recordable Indlrallosft Anan"a Remarks Incremet Position Scan Position Yes No N/A Attachrent:

San No.(s) start Stop Start Stop Probe I Channell 1 re 0- 0 OYes 0 No 75 71.30 74.80 65.00 98.84 Channel 2 0 0 E] 0 Funher Evaluation Required: Probe2 Channel3 0 0 0l Channel 4 0 0] 0 D Yes 0 No Probe 3 Channel 5 0 0 0 Archive Media: Channel 6 [I 0 0 0 External Hard Drive __Probe Channel 7 E Q0 0 CD-ROM Channel B 0 0 0 DVD-ROM W IAn Mat/ SlT Level / Date: WILL"4MANGELL/

11/IswrIVUN NY .rT low/ I

)Project No. 13-1107 EXAM ET-JED-30 Date: 26-April-2014 WWI baf A4 ~I x _47j'5 ht. I

RC-15-0020, Attachment 2 - Ihi Southwest Inner Diameter Examination Data, Part 2 of 2

Text

Description:

Attachment:

Attachment:

Description:

Description:

Attachment:

Attachment:

Description:

Description:

Description:

Description:

Attachment:

Attachment:

Description:

Attachment:

Description:

Attachment:

Description:

Description:

Attachment:

Attachment:

Description:

Attachment:

Attachment:

Description:

Attachment:

Description:

Attachment:

Attachment:

Description:

Attachment:

Description:

Attachment:

Description:

Description:

Attachment:

Description:

Attachment:

Description:

Attachment:

Attachment:

Description:

Description:

Attachment:

Description:

Attachment:

Description:

Attachment:

Description:

Attachment:

Attachment:

Description:

Description:

Attachment:

Description:

Attachment:

Description:

Attachment:

Attachment:

Description:

Attachment:

Description:

Navigation menu

Search