NL-13-093, Correction to a Previous Response Regarding Unit 2, Auxiliary Feedwater Pump Room Fire Event

From kanterella
(Redirected from ML13200A021)
Jump to navigation Jump to search
Correction to a Previous Response Regarding Unit 2, Auxiliary Feedwater Pump Room Fire Event
ML13200A021
Person / Time
Site: Indian Point  Entergy icon.png
Issue date: 07/15/2013
From: Dacimo F
Entergy Nuclear Northeast
To:
Document Control Desk, Office of Nuclear Reactor Regulation
References
NL-13-093
Download: ML13200A021 (6)


Text

Enterpy Nuclear Northeast Indian Point Energy Center

~Entergy 450 Broadway, GSB P.O. Box 249 Buchanan, NY 10511-0249 Tel (914) 254-2055 Fred Dacimo Vice President Operations License Renewal NL-13-093 July 15, 2013 U.S. Nuclear Regulatory Commission Document Control Desk 11545 Rockville Pike, TWFN-2 F1 Rockville, MD 20852-2738

SUBJECT:

Correction to a Previous Response Regarding the Unit 2 Auxiliary Feedwater Pump Room Fire Event Indian Point Nuclear Generating Unit Nos. 2 & 3 Docket Nos. 50-247 and 50-286 License Nos. DPR-26 and DPR-64

REFERENCE:

Entergy letter (NL-12-123)," Correction to Previous Responses Regarding Unit 1 Buried Piping and Unit 2 Auxiliary Feedwater Pump Room Fire Event," dated September 26, 2012

Dear Sir or Madam:

Entergy Nuclear Operations, Inc. is providing changes to the response provided by the referenced letter (NL-12-123). Entergy has determined that portions of the Unit 2 Instrument Air System previously credited for performing functions in the scope of license renewal and identified as subject to aging management review (AMR) are buried in soil but were not identified as buried in the referenced letter. This omission requires limited revisions to an AMR table for the Auxiliary Feedwater Pump Room Fire Event and Appendices A and B of the License Renewal Application (LRA), as identified in the attachment. In addition, the attachment identifies changes made to clarify that titanium components are included in the One-Time Inspection Program. The changes are consistent with the One-Time Inspection Program described in LRA Section B.1.27.

If you have any questions, or require additional information, please contact Mr. Robert Walpole at 914-254-6710.

I declare nd r penalty of perjury that the foregoing is true and correct. Executed on Sincerel FRD/rw

Docket Nos. 50-247 & 50-286 NL-13-093 Page 2 of 2

Attachment:

LRA changes to the Auxiliary Feedwater Pump Room Fire Event Table and Appendices A and B cc: Mr. William Dean, Regional Administrator, NRC Region I Mr. Sherwin E. Turk, NRC Office of General Counsel, Special Counsel Mr. Dave Wrona, NRC Branch Chief, Engineering Review Branch I Ms. Kimberly Green, NRC Sr. Project Manager, Division of License Renewal Mr. Douglas Pickett, NRR Senior Project Manager Ms. Bridget Frymire, New York State Public Service Commission NRC Resident Inspector's Office Mr. Francis J. Murray, Jr., President and CEO NYSERDA

ATTACHMENT TO NL-13-093 LRA changes to the Auxiliary Feedwater Pump Room Fire Event Table and Appendices A and B ENTERGY NUCLEAR OPERATIONS, INC.

INDIAN POINT NUCLEAR GENERATING UNIT NOS. 2 & 3 DOCKET NOS. 50-247 AND 50-286

Docket Nos. 50-247 & 50-286 NL-13-093 Attachment Page 1 of 3 The following are changes to the LRA determined necessary during review of completed buried piping inspections. One line item is added to aging management review table 3.4.2-5-7-1P2.

The change to Appendix A adds copper alloy to the list of relevant materials. The change to Appendix B adds the instrument air system to the list of systems to which the program applies.

Additions are underlined.

Table 3.4.2-5-7-1P2 Instrument Air System Components Required to Support AFW Pump Room Fire Event Summary of Aging Management Review Table 3.4.2-5-7-1P2 Instrument Air System (IA)

Component Intended Material Environment Aging Effect Aging NUREG- Table Notes Type Function Requiring Management 1801 1 Management Programs Vol. 2 Item Item Pin Pressure Copper Soil (ext) Loss of Buried Pipinq .... G boundary alloy material and Tanks Inspection A.2.1.5 Buried Piping and Tanks Inspection Program The Buried Piping and Tanks Inspection Program is a new program that includes (a) preventive measures to mitigate corrosion and (b) inspections to manage the effects of corrosion on the pressure-retaining capability of buried and underground carbon steel, copper alloy, gray cast iron, and stainless steel components. Preventive measures are in accordance with standard industry practice for maintaining external coatings and wrappings. Buried components are inspected when excavated during maintenance. If trending within the corrective action program identifies susceptible locations, the areas with a history of corrosion problems are evaluated for the need for additional inspection, alternate coating, or replacement.

B.1.6 BURIED PIPING AND TANKS INSPECTION Program Description The Buried Piping and Tanks Inspection Program is a new program that includes (a) preventive measures to mitigate corrosion and (b) inspections to manage the effects of corrosion on the pressure-retaining capability of buried and underground carbon steel, gray cast iron, copper alloy and stainless steel components. Preventive measures are in accordance with standard industry practice for maintaining external coatings and wrappings. Buried components are inspected when excavated during maintenance. If trending within the corrective action program identifies susceptible locations, the areas with a history of corrosion problems are evaluated for the need for additional inspection, alternate coating, or replacement. The program applies to buried components in the following systems.

0 Safety injection

Docket Nos. 50-247 & 50-286 NL-13-093 Attachment Page 2 of 3

" Service water

" Fire protection

  • Fuel oil

" Security generator

  • City water
  • Plant drains

" Containment isolation support

" River water service (IP1)

  • Instrument Air (2P2)

In addition to the above changes, the following table changes are being made to clarify that the One-Time Inspection Program includes titanium components in the condensate system and lube oil system. The changes add notes 404 and 405 to explicitly indicate that the One-Time Inspection Program applies to titanium component types that credit the Water Chemistry Control

- Primary and Secondary Program and the Oil Analysis Program. Additions are underlined.

Table 3.4.2-5-2-1P2 Condensate System Components Required to Support AFW Pump Room Fire Event Summary of Aging Management Review Table 3.4.2-5-2-1P2 Condensate System (Cond)

Component Intended Material Environment Aging Effect Aging NUREG- Table Notes Type Function Requiring Management 1801 1 Management Programs Vol. 2 Item Item Heat Pressure Loss of Water Chemistry -- F, exchanger Titanium Steam (ext) material Control - Primary 404 tubes boundary materialP&iSecondary Heat Heat Water Chemistry -- F1 exchanger transfer Titanium Steam (ext) Fouling Control - Primary 404 tubes & Secondary Heat Pressure Treated Loss of Water Chemistry -- F1 exchanger boundary Titanium water (int) material Control- Primary 404 tubes & Secondary Heat Heat Treated Water Chemistry -- F, exchanger transfer Titanium water (int) Fouling Control - Primary 404 tubes & Secondary

Docket Nos. 50-247 & 50-286 NL-13-093 Attachment Page 3 of 3 Table 3.4.2-5-10-1P2 Lube Oil System Components Required to Support AFW Pump Room Fire Event Summary of Aging Management Review Table 3.4.2-5-10-1P2 Lube Oil System (LO)

Component Intended Material Environment Aging Effect Aging NUREG- Table Notes Type Function Requiring Management 1801 1 Management Programs Vol. 2 Item Item Heat Pressure Titanium Lube oil (ext) Loss of Oil Analysis -- F, exchanger boundary material 405 tubes Heat Heat Titanium Lube oil (ext) Fouling Oil Analysis F-exchanger transfer 405 tubes