ML12150A368

American Society of Mechanical Engineers,Section XI Code, Inservice Inspection Program for the Unit 2 Third Ten-Year Inspection Interval, Request for Relief 2-ISI-29

ML12150A368
Person / Time
Site:	Browns Ferry  (DPR-052)
Issue date:	05/25/2012
From:	James Shea Tennessee Valley Authority
To:	Document Control Desk, Office of Nuclear Reactor Regulation
References
Download: ML12150A368 (34)

Text

Tennessee Valley Authority, 1101 Market Street, Chattanooga, Tennessee 37402 May 25, 2012 10 CFR 50.4 10 CFR 50.55a ATTN: Document Control Desk U.S. Nuclear Regulatory Commission Washington, D.C. 20555-0001 Browns Ferry Nuclear Plant, Unit 2 Facility Operating License No. DPR-52 NRC Docket No. 50-260

Reference:

American Society of Mechanical Engineers,Section XI Code, Inservice Inspection Program for the Unit 2 Third Ten-Year Inspection Interval, Request for Relief 2-ISI-29 Letter from the Tennessee Valley Authority to the Nuclear Regulatory Commission, "American Society of Mechanical Engineers Section Xl, Inservice Inspection, System Pressure Test, Containment Inspection, and Repair and Replacement Programs - Owner's Activity Report for Cycle 16 Operation," dated July 6, 2011 In accordance with 10 CFR 50.55a(g)(5)(iii), the Tennessee Valley Authority (TVA) is requesting relief from weld examination coverage requirements specified in the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code,Section XI, 1995 Edition, 1996 Addenda as amended by 10 CFR 50.55a(b)(2)(xv)(A)(2), for three (3) full penetration austenitic stainless piping welds and one (1) full penetration dissimilar metal piping weld, due to access limitations caused by design. This relief is requested for the Browns Ferry Nuclear Plant (BFN) Unit 2 third Ten-Year Inspection Interval which began May 25, 2001 and ended May 24, 2011.

A eN-a

U.S. Nuclear Regulatory Commission Page 2 May 25, 2012 Specifically, this request for relief addresses two Reactor Water Cleanup (RWCU) System full penetration piping welds, one Residual Heat Removal (RHR) System full penetration piping weld, and one Recirculation (RECIRC) System full penetration piping weld. The enclosure to this letter contains BFN Unit 2, Request for Relief 2-ISI-29, for NRC review and approval.

This request for relief is similar to, and consistent with the following BFN requests for relief: 1) Unit 3 request for relief 3-ISI-22 submitted by TVA letter dated August 24, 2007 and approved by NRC letter dated May 20, 2008: 2) Unit 2 request for relief 2-ISI-18 submitted by TVA letters dated June 2, and December 16, 2003, and approved by NRC letter dated April 12, 2004; and 3) Unit 3 request for relief 3-ISI-25 submitted by TVA letters dated January 21, July 18, and November 9, 2011, and approved by NRC letter dated January 20, 2012.

There are no new regulatory commitments contained in this letter. If you have any questions, please contact Tom Hess at (423) 751-3487.

Respectfully,

Ler, Corporate Nuclear Licensing

Enclosure:

Browns Ferry Nuclear Plant, Unit 2, American Society of Mechanical Engineers, Section Xl Code Inservice Inspection Program, third Ten-Year Inspection Interval, Request for Relief 2-ISI-29 cc (Enclosure):

NRC Regional Administrator - Region II NRC Senior Resident Inspector - Browns Ferry Nuclear Plant

Enclosure Tennessee Valley Authority Browns Ferry Nuclear Plant Unit 2 American Society of Mechanical Engineers,Section XI Code Inservice Inspection Program, Third Ten-Year Inspection Interval Request for Relief 2-ISI-29 (See Attached)

E-1

Enclosure Tennessee Valley Authority Browns Ferry Nuclear Plant Unit 2 American Society of Mechanical Engineers,Section XI Code Inservice Inspection Program, Third Ten-Year Inspection Interval Request for Relief 2-ISI-29 Executive Summary: In accordance with 10 CFR 50.55a(g)(5)(iii), the Tennessee Valley Authority (TVA) is requesting relief from weld examination coverage requirements specified in the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, Section Xl, 1995 Edition, 1996 Addenda as amended by 10 CFR 50.55a(b)(2)(xv)(A)(2), for three (3) full penetration austenitic stainless piping welds and one (1) full penetration dissimilar metal piping weld, due to access limitations caused by design.

Ultrasonic examinations were performed on the subject welds to the maximum extent practical, within the limitations of design, geometry and materials of construction of the components; using the latest ultrasonic techniques, procedures, equipment, and personnel qualified to the requirements of the Performance Demonstration Initiative (PDI) Program in accordance with 10 CFR 50.55a(g)(4) and 10 CFR 50.55a(g)(6)(ii)(C). 10 CFR 50.55a(b)(2)(xv)(A)(2), states, "Where examination from both sides is not possible on austenitic or dissimilar metal welds, full coverage credit from a single side may be claimed only after completing a successful single sided Appendix VIII demonstration using flaw on the opposite side of the weld." There is currently no single sided Appendix VIII Program for austenitic stainless welds. However, a single sided program has been established for dissimilar metal welds. This information was considered during the determination of credit for the ultrasonic examination coverage of the components included in this request for relief. The coverage credit ranges from 50.0 percent to 85.5 percent, as detailed in this request.

This relief is requested for the Browns Ferry Nuclear Plant (BFN) Unit 2 third Ten-Year Inspection Interval which began May 25, 2001 and ended May 24, 2011 Unit: Browns Ferry Nuclear Plant, Unit 2 ASME Code Components Affected: Four (4) Full penetration Piping Welds (2) Reactor Water Cleanup (RWCU) System full penetration piping welds, (1) Residual Heat Removal (RHR) System full penetration piping weld, and (1) Recirculation (RECIRC) System full penetration piping weld.

ASME Code Class: ASME Code Class 1 E-2

Section Xl Edition: 1995 Edition, 1996 Addenda. Additionally, for ultrasonic examinations, 2001 Edition of Section Xl, Appendix VIII, "Performance Demonstration for Ultrasonic Examination System,"

Code Table: Code Case N-577, N-577-2500 Table 1 and IWB-2500-1 Code Examination Cate-gory: R-A, Risk-Informed Piping Examinations and B-J, Pressure Retaining Welds in Piping Code Examination Item Number: R1.16, Elements Subject to Intergranular Stress Corrosion Cracking (IGSCC)

Code Requirement: Code Case N-577, N-577-2500, Table 1 Examination Category R1.16, requires volumetric examination of 100 percent of the weld and adjacent base material as depicted in Figure IWB-2500-8(c).

List of Components Associated with this Request for Relief:

For RWCU System weld RWCU-2-003-070 (U2C16, Inservice Inspection), only 85.5 percent coverage can be claimed. The weld joint is configured as a Pipe to Weld-O-Let, which limits the access in a portion of the upstream inspection volume for the Clockwise and Counter-Clockwise (Circumferential) scanning directions.

For RWCU System weld RCRD-2-50 (U2C16 Inservice Inspection), only 53.4 percent coverage can be claimed. The weld joint is configured as a carbon steel Elbow to forged stainless steel Valve (dissimilar metal weld). The weld width and joint configuration contributed to reduced coverage. Six inches of the weld in the elbow inner radius could not be scanned in the axial direction with the RL transducers due to bridging, though the shear wave transducers were not impeded by the elbow radius. Both the RL and shear wave transducers were limited in the circumferential scanning direction, due to the taper in the valve configuration.

For RHR System weld DRHR-2-03 (U2C16 Inservice Inspection), only 50.0 percent coverage can be claimed. The reduced coverage is attributed to joint geometry and product form. The joint configuration is penetration Flued Head to cast Valve. The examination was conducted from two sides. However, the qualified portion of this examination was limited to a single side, due to the opposite side of the weld being a casting. The portion of the weld on the IGSCC susceptible side was interrogated with the qualified techniques. Since the opposite side of the weld was a casting, the techniques used to interrogate this portion of the weld were not qualified. Further, the techniques intended to aid the examination in this limited condition were not performed. Thus, the examination of this weld is considered incomplete (Reference PER 443133).

For RECIRC System weld GR-2-09 (U2C16 Inservice Inspection), only 75 percent coverage can be claimed. The weld joint is configured as Pipe to Branch Connection (Tee). The joint geometry prevents using a bi-directional coverage technique in the axial direction, due to inside and outside diameter (ID/OD) non-parallel surfaces (reference: PDI-UT-2, Revision C, paragraph 1.8b). Clockwise and Counter-Clockwise (Circumferential) examinations were not impeded.

E-3

Reason for Request: The design configurations of the listed welds preclude a UT examination of essentially 100 percent of the required volume. In the case of RECIRC System weld GR-2-09, it is not possible to perform the volumetric ultrasonic examination from both sides of the weld, in the axial scan direction, due to the configuration of these components. 10 CFR 50.55a(b)(2)(xv)(A)(2) states, "Where examination from both sides is not possible on austenitic welds or dissimilar metal welds, full coverage credit from a single side may be claimed only after completing a successful single-sided Appendix VIII demonstration using flaws on the opposite side of the weld." The component design configuration limits UT examination coverage of the welds to the percentages shown in Table 1. Therefore, only the stated coverage ranging from 50.0 to 85.5 percent can be claimed for these welds.

Proposed Alternative and Basis for Use: None. In lieu of the ASME Section Xl Code required essentially 100 percent volumetric ultrasonic examination, TVA proposes credit for ultrasonic examination of accessible areas to the maximum extent practical given the component design configuration of the aforementioned piping welds.

Basis For Relief:

The welds were examined with the latest ultrasonic techniques, procedures, equipment, and personnel qualified to the requirements of the Performance Demonstration Initiative (PDI) Program, in accordance with the requirements of the 1995 Edition, 1996 Addenda, as amended by 10CFR 50.55a(b)(2)(xv)(A) and 10 CFR 50.55a(b)(2)(xxiv), of ASME Section Xl, Division 1, Appendix VIII as mandated by 10 CFR50.55a(g)(4). These examinations were of the accessible areas to the maximum extent practical due to the design configuration of the weld joints.

These examinations provided an acceptable level of quality and safety because the information and data obtained provides sufficient information to judge the overall integrity of the piping welds.

Therefore, pursuant to 10 CFR 50.55a(g)(5)(iii), TVA requests that relief be granted for the BFN Unit 2 third Ten-Year ISI inspection interval.

Implementation Schedule:

This request for relief is applicable to the BFN Unit 2 third Ten-Year ISI inspection interval which began May 25, 2001 and ended May 24, 2011. The welds described above are listed in the Table of this enclosure. The welds were examined during the third period (Cycle 16 -

Spring 2011) of the third Ten-Year inspection interval.

Precedent:

This request for relief is similar to, and consistent with the following BFN requests for relief:

1) Unit 3 request for relief 3-ISI-22 submitted by TVA letter dated August 24, 2007 and approved by NRC letter dated May 20, 2008; 2) Unit 2 request for relief 2-ISI-18 submitted by TVA letters dated June 2, and December 16, 2003, and approved by NRC letter dated April 12, 2004; and 3) Unit 3 request for relief 3-ISI-25 submitted by TVA letters dated January 21, July 18, and November 9, 2011, and approved by NRC letter dated January 20, 2012.

E-4

Attachments:

Inservice Inspection Drawingqs (Attachment A):

2-ISI-0221-C-01 2-ISI-0270-C-01 2-ISI-0272-C-01 Weld Examination Data Reports (Attachment B):

Examination Report UT-1 1-019 - RWCU-2-003-070 (Cyclel6)

Examination Report UT-1 1-043 - RCRD-2-50 (Cyclel6)

Examination Report UT-1 1-032 - RHR System: DRHR-2-03 (Cycle16)

Examination Report UT-1 1-023 - RECIRC System: GR-2-09 (Cyclel6)

E-5

Attachment A Inservice Inspection Drawingqs 2-ISI-0221-C-01 2-ISI-0270-C-01 2-ISI-0272-C-01

Table Nominal Examination Unit /

Weld Number/

Pipe Size ISI Drawing Coverage Cycle Comments (System)

(NPS)

Number Percent Inspection Performed Limitations due to component configuration, RWCU-2-003-070 6"

2-ISI-0272-C 85.5%

2 /16 Weld-O-let to pipe, which limits the access in a portion of the upstream inspection volume for the Clockwise and Counter-Clockwise (Reactor Water (Spring 2011)

(Circumferential) scanning directions.

Cleanup System)

Therefore, only 85.5% coverage can be claimed.

The weld joint is configured as a carbon steel RCRD-2-50 4"

2-ISI-0272-C 53.4%

2 /16 Elbow to forged stainless steel Valve (dissimilar metal weld). The weld width and joint (Reactor Water (Spring 2011) configuration contributed to reduced coverage.

Cleanup System)

Six inches of the weld in the elbow inner radius could not be scanned in the axial direction with the RL transducers due to bridging, though the shear wave transducers were not impeded by the elbow radius. Both the RL and shear wave transducers were limited in the circumferential scanning direction, due to the taper in the valve configuration. Therefore, only 53.4% coverage can be claimed.

E-6

Table (cont.)

Nominal Examination Weld Number/

Pipe Size ISI Drawing Coverage Unit Comments (System)

(NPS)

Number Percent Cycle Limitations due to component configuration, DRHR-2-03 24" 2-1SI-0221-C-01 50.0%

2 / 16 flued head to cast valve. At this time there is no Appendix VIII Supplement for the examination of cast austenitic stainless steel. Therefore, the (Residual Heat (Spring 2011) qualified portion of this examination was limited Removal System) to a single side. The portion of the weld on the IGSCC susceptible side was interrogated with the qualified techniques. Since the opposite side of the weld was a casting, the techniques used to interrogate this portion of the weld were not qualified. Further, the techniques intended to aid the examination in this limited condition were not performed. Thus, the examination of this weld is considered incomplete (Reference PER 443133). Therefore, only 50.0% coverage of the code required volume can be claimed.

Limitations due to configuration, Pipe to Branch GR-2-09 12" 2-ISI-0270-C 75%

2 /16 Connection. The requirement in (Recirculation 10 CFR 50.55a(b)(2)(xv)(A)(2), which requires System)

(Spring 2011)

UT of one side of austenitic welds to be qualified to Appendix VIII Program to claim full Code coverage. At the time of the examination, there was no Appendix VIII Program for single sided austenitic welds. Therefore, only 75%

coverage can be claimed.

E-7

NO TE:

j6 I.

PIPE SEGMENTS CONTAINING TWO LONGITUDINAL 1.-,?

9

0.

ohý

'o v SEAMS WILL BE IDENTIFIED AS:

0

-('r lk

%A K (BASE WELD NO.)-LS-ID (DOWNSTREAM)

(BASE WELD NO.)-LS-2D (DOWNSTREAM) 0,.,

'yo

.5 (BASE WELD NO.)-LS-7U (UPSTREAM) o It

(

(BASE WELD NO.)-LS-2U (UPSTREAM)

ID. cJ A

THE -LS-1 SEAM WILL BE NUMERICALLY CLOSEST TO 0 K"

ON THE PIPE, AND THE -LS-2 SEAM WILL BE

/

NUMERICALLY FARTHERMOST FROM 0 ON THE PIPE.

(e.g. -LS-1 AT 130', AND -LS-2 AT 3101) 1

2. PIPE SEGMENTS CONTAINING ONLY ONE LANGTuDNAL SEAM WILL BE IDENTIFIED AS:

N (BASE WELD NO. )-LS-D (DOWNSTREAM)

(BASE WELD NO. )-L S-U (UPSTREAM)

'5 vs90 0,O i-

,f

• 2.'

los, I

--,o"5p, FCVm74-68 "I

FCV-74-68-BC DRHR-2-15

.0.

LI DRHR-2-f'

\\

/

DRHR-2-1 0

-~~

DSRHR-2 v DSRHR-2-05-L5

\\DSRHR-2-05A-LS-2 DRHR-2-l3-i-

CV---7v-5**-*--% "..-

• .-<- /

/

• gc* *'"z*?.k REFERENCE DRAWINCS:

47N1568 47WJJ5-4 & 6 47W452 SERIES DRAVO E-2458-IC-37.

32, & 33 2-15-0276-C SHI NOTE: THIS DRAWING SUPERCEDES CHM-2070-C ALL SHEETS.

MATERIAL SPECIFICATION:

STAINLESS PIPE A-358, CR 304, CL.1 STAINLESS FITTINGS A-403WP304 24" X 1.219" NOM.

WALL THK.

SHC. 80 SS 20" X 1.031" NOM.

WALL THK. SCH. 80 SS 20' X 1,031-NOM.

WALL THK. SCH. 80 CS 6" X 0.432' NOM.

WALL THK. SCH. 805 SS ASME CC-1 (EQUIVALENT) 5.,L 5-L S EL I./O CS -

00 9-1' DSRHR-2-O7-LS-1I_

DSRHR-2-O 7-L S-2------

DSRHR-2-06-L S F

7 RISK INFORMED NELD 002D ADMIN IRG PHILLIPS I 4

kCH 1

&,0 1

REVISED PER RIMS AWFA R14 021202 102 REV DIANGE REF IPREPARER I

CKECKER I APPROVED DT TENNESSEE VALLEY AUTHORIrTY BROWNS FERRY NUCLEAR PLANT UNIT 2 RESIDUAL HEAT REMOVAL SYSTEM WELD LOCATIONS DSRHR-2-06 o*'.£.-.

RHR-2-X-X P'-. $-.."-->o IIUNIT SUPPORT NO.

• J**

'p 2 '*'

UNIT RESIDUAL HEAT REMOVAL

' 4,"

6>

DRAWN: RPC DATM: V-20-88 SCALE: NTS CADAM ISICMP CHECKED:

JES APPROVED CL8 REv SUSW]TWE:

EDC

-ISI-0221-Clo02 ICAOMAINTAINED DRAWING CCD ALL A/D HISTORY RESEARCHED AT ROOD

r A - L OOP REFERENCE DRA WINGS:

2-47W2408-8,9 (S.E. REPLACEMENT)

GE 769E963 (S.E. REPLACEMENT)

TVA 47K1544-2 GE 2-153F754 2RFI KELLOGG BF 2-180 2RF6 NOTE: THIS DRAWING SUPERSEDES CHM-2068-C ALL SHEETS IMA TERIAL SPECIFICATIONS:

2RF5

A358, TP 304 R

4" X 0.337" NOM WALL THK.

(SS)

KR-2-15 12" X 0.569" NOM.

WALL THK.

(SS) 22" X 1.030" NOM.

WALL THK.

(SS)

GR-2-09-LS 28" X 1.138' NOM.

WALL THK.

(SS) SUCTIOA 28" X 1.322' NOM. WALL THK.

(SS) DISCHARGE 2" SCH. 80 A-J76.

TP304 V2' FITTINGS A-182, FJO4 2-09 SAFE END REPLACEMENT 12" X 0.688 NOM.

WALL THK.

(SS)

KR-2-14 SA 403 WP 316 N.G.

ASME CC-1 (EOUIVALENT) 2RXI KR 12-L S RPV-I

-12 RISER DETAIL NOTES: 1. WELDS 2RXI ARE THE NOZZLE TO SAFE-END WELDS

2. ALL 2" WELDS ARE SOCKET WELDED EXCEPT WHERE NOTED.

3.

PIPE SEGMENTS CONTAINING TWO LONGITUDINAL SEAMS WILL BE IDENTIFIED AS:

(BASE WELD NDO.)-LS-ID (DOWNSTREAM)

(BASE WELD NO.)-LS-2D (DOWNSTREAM)

(BASE WELD NO.)-LS-IU (UPSTREAM)

(BASE WELD NO.)-LS-2U (UPSTREAM)

THE -LS-I SEAM WILL BE NUMERICALLY CLOSEST TO 0'" ON THE PIPE. AND THE -LS-2 SEAM WILL BE NUMERICALLY FARTHERMOST FROM 0' ON THE PIPE.

(e.g. -LS-1 AT 130'. AND -LS-2 AT 310")

4.

PIPE SEGMENTS CONTAINING ONLY ONE LONGITUDINAL SEAM WILL BE IDENTIFIED AS (BASE WELD NO.)-LS-D (DOWNSTREAM) r-LS-1 (BASE WELD NO.)-LS-U (UPSTREAM)

-LS-2 I RISK IMFORMED WELDS 1003 AOhEIN IRD LOSIERI J0 1.ff4

'2.'.'.c REVISED PER RIMS MEMO R14 021202 102 REV CHANCE REF I PREPARER I CHECIKER I APPROVED DATE TENNESSEE VALLEY AUTHORITY BROWNS FERRY NUCLEAR PLANT

'XN UNIT 2 WELD NO.

RECIRCULA TION SYSTEMI RISER ORANI APPROVED SCALE NIS L E T T E R V Et 9 -1 0 Es D-C

?- _ - s ), r I or s r E ALL A/D HISTORY RESEARCHED AT ROOD CCD XR-N-N 2R, r-~

IL...WELD NO.

K = KELLOGG SHOP WEL UNIT G = GE FIELD WELD r---

UNIT NO.

SYSTEM S YS TEM

REGION OF THERMAL FATICUE rF.AMWNA TION PER NIUREC-O6 F9 EXAMI rION PER NUREG-O6F9 THERMAL TEE (UPSTREAM OF VALVE 2-FCV-69-630)

RCRDS-2-OJ3-TEE THERMAL TEE

-DRWC-2-O7B CARBON STEEL S TA INL ESS STEEL O~SRWC-2-05 (DL)

REFERENCE DRAWINGS NOMINAL CRD-2-005 NOTE:

THIS DRAWING SUPERSEDES CHM-2075-C AND CHM-2072-C (ALL SHEETS)

RCRD-2-45 MATERIAL SPECIFICATIONS RCROS-2-02 STAINLESS STEEL RCRDS-2-03 FITTINGS I

RCRD-2-44 6" sA403 WP316NC SCH. 80 SS PIPING 6" 5A376 TPJ1SNG SCH. 80 SS 6" A376GR TP304 SCH. 80 SS 6" A312GR TP304 SCH. 80 SS CARBON STEEL 4" SCH. 80 A-333.

CR1 (SEAMLESS) CS 6

X X.

562" -NOM WALL SCH. 720 CS R14 120119 105 8-XO.593" NOM WALL SCH.

100 CS VAL VES 2-69-680 SA351 CF8M SS 2-69-580

A35, CF8M SS 2-FCV 02.A357 CFBA1 SS 2-85-577 A182 F316 SS 2-85-576 A182 F316 SS 2-69-579 A182 F316 SS Oi Jr3 2

CRO CAP 4' X 0. 674" AOM WALL ES ASMA" CC-? (EOUIVALENT)

RISK INFORME wELD 4-* CAP

\\k85-576 (STAINLESS SrfT).L N9)9 146 R14 070503 101 0101 ALEIXR 1 CAW-ELORL ~R.I uI l

A, REVISED PER RIMS KAIS 4RI 070503 101 AND Ri4 120119 105 (REF:

DFPER 443133) oe REV

@A-E FF PREPARER I

OCHECER IAPFIOVOS 000 TENNESSEEl VALLEY ALITHORITY Si1ROWNS V4.'fRN NUCLEAR PLANT

-,.' UN I T. 2 REACTOR WATER CLEAN UP..RCIC, AND CRD WELD IDENTIFICATION DRAIN, A DAM 6,19-88-Do ALE

• S SO CRECCED.

JES I

-P.D SAfT 0 1 OF 03-REV

• ,ITrtDc* F 2-ISI-0272-CpIoD ALL A/D HISTORY RESEARCHED AT ROO D

eAD MAINTAINED DRAING CCD I

8" X 8 X 4"T7

'OSRWC-2-03 (OL)

DSRWC-2-02 070503 101

Attachment B Examination Report UT-1 1-019 - RWCU-2-003-070 Examination Report UT-1 1-043 - RCRD-2-50 Examination Report UT-1 1-032 - RHR System: DRHR-2-03 Examination Report UT-1 1-023 - RECIRC System: GR-2-09

Z UT Calibratior tamination Site/Unit:

Summary No.:

Workscope:

BFN 1

2 01559-i6l-BFN2

'Si Procedure:

Procedure Rev.:

Work Order No.:

N-UT-44 Outage No.:

U2RF16 Report No.:

UT-114-t9 Page:

1 of 6

2-81-4.6.G Code:

Section XI 11995 Ed01196 Add Cat./ltem:

R-A/Ri.16D Location:

Reactor Building - Drywell Drawing No.:

2.161-0272-C-01

==

Description:==

P - P System ID:

069 - Reactor Water Cleanup System Component ID: RWCU-2-003-070 SizelLength:

NIA Thickness/Diameter.

0.43216 Limitations:

Yes. See Coverage Plot Start Time:

1143 Finish Time:

1220 Instrument Settings Search Unit cal.

Time Date Axial Orientated Search Unit Serial No.:

E33669 Serial No.:

0200M9 Checks Calibration Signal Sweep Sound Path Manufacturer KRAUTKRAMER Manufacturer.

KBA Initial Cal.

0920 311412011 Reflector Amplitude %

Division Model:

USN 60 Linearity:

L-11-007 Size:

0.375" Model:

Comp G I

. 1145 311412011 0.5" Notch 80%

3.25 0.683" Inter. Cal.

NIA Delay:

5.2097p Range:

2.009 Freq.:

2.25 MHz Center Freq.:

IVA Inter. Cal.

NA Inter. Cal. INIA M1I Ceilet:

.1237 Energy:

High Exam Angle:

45" Squint Angle:

NWA Final Cat. 1 114 3't4111 Damping:

10000 Reject:

0 Measured Angle:

4r" Mode:

Shear Couplant PRF Mode:

Auto High SU Freq.:

2.25 MHz Exit Point:

WA

1. of Elements:

I C Btch 10325 Circumferential Orientated Search Unit Di.p. Start:

IP Rectify:

Full Wave Config.:

Single Focus:

WA Type:

Ultragel II Calibration Signal Sweep Inst. Freq.:

2.26 MHz Shape:

Round Contour.

Flat Mfg.:

Sonotech Reflector Amplitude %

Division Sound Path Wedge Style:

Non-integral E

Btch 10326 0.6" Notch 80%

3.25 0.683" Ax. Gain (dB):

25.0 Circ. Gain (dB):

26.0 Search Unit Cable Type:

Utragel ii I

Screen Div. =

.20 in. of Sound Path Type:

RG-174 Length: 0' No. Conn.: 0 Mfg.:

Sonotech Calibration Block Scan Coverage M

Cal. Block No.:

WB-85 UpstreamE] Downstream-- Scan dB:

45 Reference Block aReference/Simulator Block

.Gain Signal sweep Sound Path Thickness:

0.5" Die.:

Flat CW 6]

CCW [

Scan dB:

45 Serial No.:

790396 dB Reflector Amplitude % Division Cal. Bik. Temn.: 6V Temp. Tool:

853274 Exam Surface:

OD Type:

Rompas 36.0 SDH 60%

5.1 1.02" Comp. Temp.:

69" Temp. Tool:

658274 Surface Condition:

Ground Recordable Indication(s):

Yes El No RJ (If Yes, Ref. Attached Ultrasonic Indication Report.)

Comments: E33669 - Cal Due Date 9/18/201t Results:

NRI [

RI []

Info LI 658274 - Cal Due Date 112912012 Percent Of Coverage Obtained > 90%:

No Reviewed Previous Date:

yes 85.% Code Coverage Examiner Level Ji(.,

_flatuý Date Reviewer D a/

4 te KieinJea. Michael W.

-lw

?

3114/2011

• /lF' Examiner Level WA Signatute Date Site Review Signature Date WA Other Level WA Signature Date ANII Review Signature Date NWA r/bi/

UT Callbration/Examination i=

UT Calibratior kamination Site/Unit:

Summary No.:

Woakscope:

BFN I

2 Procedure:

011159-lSI-IFN2 Sil Procedure Rev.:

Work Order No.:

N-UT-64 2-SI-4.S.0 Outage No.:

U2RF16 Report No.:

UT-11-019 Page:

2 of 5

Code:

Section Xl 1995 Ed/199B Add Cat/Item:

R-AIRt.16D Location:

Reactor Building - Drywall Drawing No.:

2-181-0272-C-01

==

Description:==

P - P System ID:

069 - Reactor Water Cleanup System Component ID: RWCU-2-003-070 Size/Length:

N/A Thickness/Diameter 0.43216 Limitations:

Yes - See Coverage Plot Start Time:

114:3 Finish Time:

1155 i

i i

.u.

-i i

Instrument Settrings Searh Unit Cal.

Time Date Axial Orientated Search Unit Serial No.:

E33669 Serial No.:

01YRJX Ches Calibration Signal Swep Sound Manufacturer:

KRAUTKRAMER Manufacturer:

KEA Initial Cal.

0938 311412011 Reflector Amplitude %

Division Model:

USN 60 Linearity:

L-11-007 Size:

0.375" Model:

Camp G Inter. Cal.

`1160 13H412011 1.0" Notch 80%

6.6 2.1144" Delay:

10.6738p Range:

5.000 Freq.:

1.5 MHz -

Center Freq.:

WA Inter. Cal..

A

_I_

Inter. Cal.

WA Mti CaiVel:

.1266 Energy:

High Exam Angle:

700 Squint Angle:

NIA Inter. Cal. I

_2_

Damping:

1000 a Reject:

0 Measured Angle:

69° Mode:

Shear PRF Mode:

Auto High SU Freq.:

1.5 MHz Exit Point:

WA

1. of Elements:

1 Couplant Disp. Start IP Rectify' Full Wave Conf-g.:

Single Focus:

WA Cal. Batch:

10325 Circumferential Orientated Search Unit Inst. Freq.:

2.25 Mho Type:

Ultragel II Calibration Signal Sweep Shape:

Round Contour Flat Mfg.:

Sonotech Reflector Amplitude %

Division Sound Path Wedge Style:

Non-integral WA N/A NIA NA Ax. Gain (dB):

62.1 Circ. Gain (dB):

WIA SeareExam Bah:

1035 Search Unit CableEamBth 105 1

Screen Div. =

.50 in. of Sound Path Type:

RG-174 Length:

6' No. Conn.: 0 Type:

Ultragel II Mfg.:

Sonotech Calibration Block Scan Coverage Cal. Block No.:

WB45 Upstream[] Downestam[--] Scan dB:

68 Reference Block Reference/Simulator Block Thickness:

1.0" Dia.:

Flat CW CCW[] Scan dB: NIA Serial No.:

790396 Gain Signal Swepvi Sound Path C a l. Bo k.T e m p.: 6 9 ' T e m p.T o o l:

5 5 8 2 7 4 S f C o n d iti o n G r o u n d Ca.B. Temp.:

SB' Temp. Tool:

5S8274 Exam Surface:

OD Type:

Rompas 36.7 2.0" RAD 80%

4.0 1.98" Surface Condition:

Ground Recordable Indication(s):

Yes []

No []

(If Yes, Ref. Attached Ultrasonic Indication Report.)

8 Results:

NRI [

RI []

Info []

Comments: E33O9 - Cal Due Date 911812011 550274 -Cal Due Date 1/29120t2 Percent Of Coverage Obtained > 90%:

No Reviewed Previous Date:

yea 85.5% Code Coverage Examiner Level 11(N)

SI oat Date Reviewer S. nature ate Klolnjan, Michael W.

311412011 14*.7" I7 4

Examiner Level N/A Big 4$re Date Site Review Signature Date:

Other Level N/A Signature Date ANII Review Signature Date MIA

+I, A s/e,, I 0

0 UT Callbration/Examination

UT Calibratior tamination Site/Unit:

Summary No.:

Workscope:

BFN I

2 0185948i-BFN2 1S' Procedure:

Procedure Rev.:

Work Order No.:

N-UT-64 I1I 2-614.6.G Outage No.:

U2RFt6 Report No.:

UT-11-1g9 Page:

3 of 5

Code:

Section XI 1995 ESd/lgg1 Add Cat./Iftem:

R-A/R1.16D Location:

Reactor Building - Drywell Drawing No.:

2-181-0272-C-0t

==

Description:==

P - P System ID:

069 - Reactor Water Cleanup System Component ID: RWCU-2-003-070 Size/Length:

N/A Thicknees/Dlameter 0.43216 Limitations:

Yes - See Coverage Plot Start Time:

1140 Finish Time:

1220 i

i_______" _______,

m r

Instrument Settings Search Unit FC..

Time Date Axial Orientated Search Unit Seral No.

E3369 Serial No.:

Calibration Signal Sweep Sound Path Manufacturer:

KRAUTKRAMER Manufacturer:

KBA initial Cal.

0940 311412011 Reflector Amplitude %

Division Model:

USM 60 Linearity:

L-11-007 Size:

0.375' Model:

Comp G Inter. Cal.

1149 311412011 o.6r Notch 80%

6,9 1.37" Delay-6.3368p Range:

2.000 Freq.:

2.25 MHz Center Freq.:

N/A Inter. Cal.

IVNAA inter. Cal.

N/A M1I CalNel:

.1172 Energy:

High Exam Angle:

70 Squint Angie:

NA

l. l 226_ 314/201 IFinal Cai.

1ý22 31401 Damping:

10000 Reject:

0 Measured Angle:

G0* Mode:

Shear PRF Mode:

Auto High SU Freq.:

2.25 MHz Exit Point:

NIA

1. of Elements:

I Couplant Disp. Stea:

-IP Rectify:

Full Wave Cal. Batch:

10325 Circumferential Orientated Search Unit inst. Fingle 2our Type:

Ultragel II Calibration Signal Sweep S

Inst. Freq.:

2.26 Mlz Shape:

Round Contour.

Flat Mfg.:

Sonotech Reflector Amplitude %

Division Sound Path Wedge Style:

Non-Integral N/A N/A NWA N/A Ax. Gain (dB):

52.8 Circ. Gain (dB):

NIA Sea Unt C al Exam Batch:

10328 Search Unit Cable 1

Screen Div.

.20 in. of Sound Path Type:

RG-174 Length: 6' No. Conn.: 0 Type:

Ultragal II Mfg.:

Sonotech Calibration Block Scan Coverage Cal. Block No.:

WB-85 Upstream[] DownstreamVJ Scan dB:

60 Reference Block Reference/Simulator Block Thickness:

0.5" Flat cd WGain Signal Sweep Sound Path Thicness: _."

Dia.:

Fiat CW E CCW[] Scan dB:

WeA Seril No.:

790306 Reflector Amplitude % Division Cal. 81k. Temp.: 690 Temp. Tool:

58M274 Exam Surface:

OD Type:

Rompas 28.9 1.0" RAD 80%

5.0 1.00" Comp. Temp.:

69" Temp. Tool:

558274 Surface Condition:

Ground Recordable Indication(s):

Yes [E No. R (if Yes, Ref. Attached Ultrasonic Indication Report.)

Results:

NRI V RI []

Info []

Comments: E33669 -Cal Due Date 1118I20111 568274 - Cal Due Date 1129/2012 Percent Of Coverage Obtained > 90%:

No Reviewed Previous Data:

yes 85.5% Code Coverage Examiner Level II(N) lgnat Date Reviewer

reg,

/

Date Ki(elnian, Michael W.

ijpg' 3114/2011 4/7 Al Examiner Level WA Sl 8natTre Date Site Review Signature Date WA Other Level NIA Signature Date ANII Review SgaueDt WIA j...a&

t UT Calibration/Examination I

g r

/

000374 Supplemental Report Report No.:

UT-11-019 Page:

4 of 5

% ummary No.: 0189-9SI-BFN2

'4 7

al Examiner. Kiolnjan, Michael W.

jt*4'&arvel:

11(N)

Reviewer:,/11"7/.rMRZ4' e Examiner. NWA Level:

NIA Site Review:.

Other: NIA Level:

NIA ANII Review:

Date:

Date:a Date:

Comments: None Sketch or Photo: O:.JddsalSeive,~ddeaLBFNDocumentatIon\\U2RI6 Scanned Data\\RWCU-2-003-070 Coverage Plot.jpg 2E 4

I PIPE I1 U fr-6W'4) 'IC X CV) 41fX(D t

L7t5

~A 9~

~3,9) iooZ 7IZ 106%

-4 IAD%

4ý'W. of7.

-zl

=

e6 u

/j. I A 6 r III Ir-Supplemental Report

IIVAJ Supplemental Report 000375 Report No.:

UT-1Il-Ole

.,.,mmary No.: 01859-ISI-BFN2 Examiner: KKleinjan, Michael W.

dew'&.Ve U(N)

Examiner: NIA 7 Level:

NIA Other. NIA Level:

NIA Page:

Reviewer,WIV47-HI4V4' E?

Site Review:

ANII Review:

5 of 5

Date:

Date:

g If/

Comments: None Sketch or Photo: ():\\lddeaL ServerlddealBFNmocumentaton\\U2R1 Scanned DmtatRWCU-2-003-070 T&C.jpg Record Thickness itiamurme

.ts As Weld Indicated, Inctudlml Weld Width.

Ce.,

.f*lln.

Edg.-T.EdPg At 0" 1

.4 2.

• Weld Kdg.

Positiont O' 2V* 1i 2TVr 9W CROWN HEIGHr:

"'el 0 DIANUMM5R CROWN WIMT:

I WLD LENG1"TH:

Supplemental Report

UT Calibratior camination Site/Unit:

BFN Summary No.:

Workscope:

1 2

06510-ISI-BF.N2 181 Procedure:

Procedure Rev.

Work Order No.:

N-UT-52 4

Outage No.:

U2RF16 Report No.:

UT-t1-043 Page:

1 of 8

2-81.4.6.G Code:

Section XI 19g5 EdII9S6 Add Cat./item:

R-A/R1.160 Location:

Reactor Building, Main Steam Tunnel Drawing No.:

2-1S1-0272-C-01

==

Description:==

EL - VLV System ID:

069 - Reactor Water Cleanup System Component ID: RCRD-2-50 Size/Length:

NIA ThicknesslDiameter 0.53114" Limitations:

None Start Time:

2245 Finish Time:

2265 Instrument Settings Search Unit Cal-Time Date Axial Orientated Search Unit Serial No.:

E37588 Serial No.:

U0109 Checks Calibration Signal Sweep Sound Path Manufacturer.

KRAUTKRAMER Manufacturer Megasonlcs Initial Cal.

2100 311612011 Reflector Amplitude %

Division Model:

USN 60 Linearity:

L-11-002 Size:

2 (10xlimm)

Model:

CBS Inter. Cal.

NWA 0.6 SON 50%

5.3 1.05 Inter. Cal.

WA Deasy:

6.5197p Range:

2.000 Freq.:

2.0 MHz Center Freq.:

NIA I

-_ IInter. Cal1.

N/A Mtl CaWel:

.2330 Energy:

High Exam Angle:

60° Squint Angle:

WA Final Cal.

0027 311712011 Damping:

10000 Reject:

0 Measured Angle:

57" Mode:

Long Couplant PRF Mode:

Auto High SU Freq.:

2.0 MHz Exit Point:

.41.68

1. of Elements:

2 Cal. Batch:

06126 Clrcumferentilt Orientated Search Unit Disp. Start:

IP Rectify:

Full Wave Config.:

D-SBS Focus:

FS-17 Type:

Ultragel II Calibration Signal Sweep Inst. Freq.:

2.0 MHz Shape:

Rect Contour 6" Ax Mfg.:

Sonotech Reflector Amplitude %

Division Sound Path Wedge Style:

Integral Exam Batch:

06126 NIA NIA IVA WA Ax. Gain (dB):

63.0 Circ. Gain (dB):

NWA Search Unit Cable Type:

Ultragel 11 I

Screen Div. =

.20 In. of Sound Path Type:

RG-174 Length:.'

No. Conn.: 0 Mfg.:

Benotech Calibration Block Scan Coverage Cal. Block No.:

BF-131 Upstream Downstream_- Scan dB:

63 Reference Block ReferencelSimulator Block Thcnes 0 0**HDa:"Sra o:

O-3 Gain Signal Swoop Sound Path Thickness:

0.6" SH Die.:

4" CW []

CCWE] ScandB: NWA SedaBNo.:

BF-t31 dB Refletor Amplitude % Division Cal. Bik. Temp.: 70.

Temp. Tool:

559272 Exam Surface:

00 Type:

Cal Block 63.0 0.6 8DH 18%

5.3 Comp. Temp.:

78" Temp. Tool:

568272 Surface Condition:

Flush Recordable Indication(s):

Yes []

No [

(If Yes, Ref. Attached Ultrasonic Indication Report.)

Comments: E37086 -Cal Due Date 101512011 Results:

NRI []

RI [Into

[]

58272 -Cal Due Date 112912012 Percent Of Coverage Obtained > 90%:

No Reviewed Previous Data:

Yes 53.4% Code Coveage Examiner Level ii(N)

Signature Date Reviewer Brown, Thomas D.

H7)

ý 311712011 Matt Welch, LillIIt Examiner Level W/A Signature Date Site Review Signature Dab N/A MIA Other Level WA Signature Datel ANII Review 2Signature Date MIA I1/3/f.Z 0

0Y UT Calibration/Examination

./

I Oil UT Calibratior tamination Sits/Unit:

BFN Summary No.:

I 2

056104.SI-FN2 Procedure:

Procedure Rev.:

Work Order No.:

N-UT-82 4

2-81-4.6.G Outage No.:

U2RF1I Report No.:

UT-41-043 Page:

2 of 8

Workscope:

ISl "

Code:

Section XI 1905 E4/1996 Add Cal./Ilem:

R-ANRI.16D Location:

Reactor Building, Main Steam Tunnel Drawing No.:

24Sl-0272-C-01

==

Description:==

EL -VLV System ID:

069 - Reactor Water Cleanup System Component ID: RCRD.2-50 Size/Length:

NIA Thickness/DIameter 0.63114" Limitations:

None Start Time:

2235 Finish Time:

2245 Instrument Settings Search Unit Cal.

Time Date Axial Orientated Search Unit Serial No.:

E37689 Serial No.:

U0110 Checks Calibration Signal Sweep Sound Path Manufacturer:

KRAUTKRAMER Manufacturer Megasonics Initial Cal.

2050 3/16/2011 Reflector Amplitude %

Division Model:

USN 60 Linearlty:

L-1 1-002 Size:

2 (110xStomm)

Model:

CSS inter. Cal.

N/A 0.6 8DH 80%

5.6 1.118" Delay'.

8.3 6 6 9p Range:

2.000 Freq.:

2.0 MHz Center Freq.:

NIA Inter. Cal.

N/A M'ti CalJel:

.2330 Energy:

High Exam Angie:

70*

SquIntAngie:

NIA IFinal Cal. 100281 31117M011¶ Damping:

10000 Reject:

0 Measured Angle:

70*

Mode:

Long PRF Mode:

Auto High SU Freq.:

2.0 MHz Exit Point:

.41.65

1. of Elements:

2 Disp. Start i'

Rectify, Full Wave Cal. Batch:

06126 Circumferential Orientated Search Unit Config.:

D-SBS Focus:

FS-28 Inst. Freq.:

2.0 MHz Shape:

Red Contour:

6. Ax Type:

Ultragel II Caitbration Signal Sweep Sound Path Mfg.:.

Sonotech Reflector Amplitude %

Division Wedge Style:

Integral Exam Bt:

15IA N/A MIA MIA Ax. Gain (dB):

70.0 Circ. Gain (dB):

N/A Search Unit Cable Exam Batch:

06126 I

Screen Div. -

.20 in. of Sound Path Type:

RG-174 Length: 6' No. Corn.: 0 Type:

Ultragel ii Mfg.:

Sonstech Calibration Block Scan Coverage Cal. Block No.:

BF131 UpstreamR] Downstrearm[

Scan dB:

70 Reference Block ReferancelSimulator Block ain' Signal Sweep SudPt Thickness:

0.0" 8DH Die.:

4" W L]

COW [I] Scan dB: NIA Serial No.:

BF-131Rtor GAm litude %

S Sound Path Cal. BIk. Temp.: 70.

Temp. Tool:

568272 Exam Surface:

OD Type:

Cal Block 70.0 0o.6 SD!HL o0%

.6 4 1.11s" Camp. Temp.:

78116 Temp. Tool:

658272 Surface Condition:

Flush I

Recordable Indication(s):

Yes []

No [

(If Yes, Ref. Attached Ultrasonic Indication Report.)

Results:

NRI R]

RI ]

Info D]

Comments: E23768 - Cal Due Date 101W/2011 558272 - Cal Due Date 1129/2012 Percent Of Coverage Obtained > 90%:

No Reviewed Previous Data:

Yes 53.4% Code Coverage Examiner Level 111(N)

Signature Date Reviewer Signature Date Brown, Thomas D.

~

)

~3117/2011 Matt Welch, Lill~

Examiner Level N/A

/

Signalure Date Site Review Signature Date N/A N/A Other Level N/A Signature Date ANIi Review Signature Date

/A UT CalIbration/Examination

(_

UT Calibratior xamination Site/Unit:

Summary No.:

Workeoope:

BFN

/

2 05510-ISI-BFN2 Procedure:

Procedure Rev.:

Work Order No.:

N-UT-82 4

2-91-4.6.43 Outage No.:

U2RF16 Report No.:

UT-11-043 Page:

3 of a

181 Code:

Section XU 1995 Wd11996 Add Cat./item:

R.AIRI16D Location:

Reactor Building, Main Steam Tunnel Drawing No.:

2-01-0272-C-01

==

Description:==

EL -VLV System ID:

069 - Reactor Water Cleanup System Component ID: RCRD-2-50 Size/Length:

NIA Thickness/Diameter.

0.531 14" Limitations:

None Start Time:

2325 Finish Time:

2336 intrument Settings Search UnIt Ccal.

Time Date Axial Orientated Search Unit Serial No,:

E37688 Serial No.:

U0270 Checks I

Calibration Signal Sweep Sound Path Manufacturer:

KRAUTKRAMEIR Manufacturer:

Megasonies Initial Cal.

2130 3/1/2011 Reflector Amplitude %

Division Model:

USN 60 Linearity:

L-11-002 Size:

2 (4xi4mm)

Model:

CSS Inter. Cal.

WIA WN/A NWA NIA NtIA Delay:

9.0675P Range:

1.000 Freq.:

2.0 MHz Center Freq.:

N/A Inter. Cal.

WN/A M't Cal/Vel:

.2330 Energy:

High Exam Angle:

420 Squint Anglo:

NIA Finai Cal.

0033 3/1712011 Damping:

10000 ReJect:

0 Measured Angle:

420 Mode:

Long 1 0033 311712011 PRF Mode:

Auto High SU Freq.:

2.0 MHz Exit Point:

.341.36

1. of Elements:

2 p__

Disp. Start:

IP Rectify.

Full Wave Config.:

D.SBS Focus:

F8-14 Cal. Batch:

08126 Circumferential Orientated Search Unit Inst. Freq.:

2.0 MIz Shape:

Rect Contour 8" Circ Type:

Ultragel II Calibration Signal Sweep Sound Path Mfg.:

Sonotech Reflector Amplitude %

Division Wedge Style:

Integral 0.5 SON 80%

6.7

.867" Ax, Gain (dB):

66.8 Circ. Gain (dB):

N/A Search Unit Cable Exam Batch:

06125 I

Screen Div. =

.10 in. of Sound Path Type:

RG-174 Length: 6' No. Conn.: 0 Type:

Ultragel II Calibration Block Scan Coverage Mfg.:

Sonotech Cal. Block No.:

BF-132 Upstreamfl]

Downstream[-

Scan dB:

NIA Reference Block ReforencelS1mulator Block Thickness:

0.5 SON Dia.:

4-CW CCW[]

ScandB:

59 Serial No.:

OF-132 Gain Signal Sweep Sound Path Thines__.5

_D _

4WW[_n___o.-1dB Reflector Amplitude % Division Cal. Blk Temp.: 70.

Temp. Tool:

558272 Exam Surface:

lou Type:

Cal Block 56.6 0.5 SH 00%

6,7'

.667" Comp. Temp.:

780 Temp. Tool:

658272 Surface Condition:

Flush Recordable Indication(s):

Yes No []

(if Yes, Ref. Attached Ultrasonic Indication Report.)

Results:

NRI Rj RI F1 Info El Comments: E37088 - Cal Due Date 10/5/2011 658272 - Cal Due Date 112912012 Percent Of Coverage Obtained > 90%:

No Reviewed Previous Data:

Yes 63.4% Code Coverage Examiner Level Ill(N)

Signature Date Reviewer f,,

Signature Date Broowf, Thomas 0.

3M1712011 Matt Welch, LilileC 6 -

j~.

Examiner Level NIA

/

Signature Date Site Review Signature Date MIA NIA Other Level NIA Signature Date ANII Review nature Date N/A C:

UT Calibration/Examination C, -

V

UT Calibratioii

'amination Site/Unit:

Summary No.:

Workscope:

BFN I

2 05510-ISI-BFN2 Procedure:

Procedure Rev.:

Work Order No.:

N-UT-82 4

2-SI-4.6.G Outage No.:

U2RFi6 Report No.:

UT-I 1-043 Page:

4 of 8

1'1 Code:

Section X1 1996 Ed/lOg6 Add Cat./item:

R-A/RI.16D Location:

Reactor Building, Main Steam Tunnel Drawing No.:

2-431-0272-C-01

==

Description:==

EL -VLV System ID:

069 - Reactor Water Cleanup System Component ID: RCRD-2-50 Size/Length:

N/A Thickness/Diameter.

0.631 1411 Limitations:

None Start Time:

2316 Finish Time:

2325

,nstrum t Settings Srch Unit C

I.Time Date Axial Orientated Search Unit Serial No.:

E37658 Serial No.:

U0271 Checks I

Calibration Signal Sweep Manufacturer.

KRAUTKRAMER Manufacturer:

Megasonics initial Cal.

2120 311612011 Reflector Amplitude %

Division Model:

USN 60 Linearity:

L-i1-002 Size:

2 (4x14mm)

Model:

CSS Inter. Cal.

I&N/A l

_N/A N/A N/A NIA Delay:

9.0675pa Range:

1.000 Freq.:

2.0 MHz Center Freq.:

N/A Inter. Cal.

W/A Inter. Cal.

N/A MV Cal/Vel:

.2330 Energy:

High Exam Angle:

42" Squint AngleA. WA Damping:

10000)

Reject:

0 Measured Angle:

4r Mode:

Long PRF Mode:

Auto High SU Freq.:

2.0 MHz Exit Point:

.32/.38 9 of Elements:

2 Couplant Disp. Start:

IP Rectify:

Full Wave Confg.:

D-13S Focus:

FS-14 Cal. Batch:

06125 Circumferential Orientated Search Unit Type:

Ultragel II Calibration Signal Sweep Mfg.:_______c Reflector Amplitude %

Division SudPt Inst. Freq.:

2.0 MHz Shape:

Rect Contour.,

6" CIrc Mf*,:

Sonotech Re_ eto__pitdeDisonSunPt Wedge Style:

Integral 0.6 SDH 80%

5.0

.823" A*x. Gain (dB):

56.5 Circ. Gain (dB):

N/A Search Unit Cable Exam Batch:

06125 I

Screen Div. =

.10 In. of Sound Path Type:

RG-174 Length:

0' No. Conn.: 0 Type:

Ultragel Ii Mug.:

Sonotech Calibration Block Scan Coverage Cal. Block No.:

BF-132 Upstreamc] Oownstream(-] Scan dB: N/A Reference Block RefereneeSlwmupator Block Thicknes: 0.6" oH Ols.

4.

Gai Signal Ic"8 SweepPat Thickness:

0.6" 5O Die.:

4" CW CCWR Scan dB:

59 Serial No.:

BF-132 Gain Cal. BIk. Temp.: 70_ Temp. Tool:

558272 Exam Surface:

OD Type:

Cal Block d6.1 l.e S

mli 80%

D.0

.823" Comp. Temp.:

786 Temp. Tool:

658272 Surface Condition:

Flush Recordable Indication(s):

Yes E]

No 9 (If Yes, Ref. Attached Ultrasonic Indication Report.)

Results:

NRI J0 RI []

Info D1 Comments: E37688 -Cal Due Date 10/512011 658272 -Cal Due Date 1t20J2012 Percent Of Coverage Obtained > 90%:

No Reviewed Previous Data:

Yes 53.4% Code Coverage Examiner Level 111(N)

Signature Date Reviewer sigd§ nature.A Date Oro n, Thomas 0.

El 31120l1 Matt Welch, LI l Examiner Level N/A

'/*Signature Date Site Review Signature Date NIA NIA Other Level MIA Signature Date ANII Review Cnnature Date W/A x--4~+/-~

13r&

UT Calibration/Examination C=

U

UT Callbratior

~amination Site/Unit:

Summary No.:

Workscope:

BFN

/2 0551 0-l8l-FN2 Is',

Procedure:

Procedure Rev,:

Wori Order No.:

N-UT-82 4

2-51-4.6.6 Outage No.:

U2RFIl Report No.:

UT-11-043 Page:

5 of 8

Code:

Section YJ 1996 Ed&t996 Add Catl.Item:

R-A/RI.16D Location:

Reactor Building, Main Steam Tunnel Drawing No.:

2-114-0272-C-01

==

Description:==

EL - VLV System ID:

069 - Reactor Water Cleanup System Component ID: RCRD-2-50 Size/Length:

N/A Thickness/Diameter 0.63114" Limitations:

None Start Time:

2328 Finish Time:

2336 Instrument Settings Search Unit Cal.

Time Date Axial Orientated Search Unit Serial No.:

E37688 Serial No.:

5B0450 Checks Calibration Signal In itiat io S ian a S w e ep s o,u n d P a th Manufactumr KRAUTKRAMER Manufacturer, K1A initial Cal.

2140 311612011 Reflector Amplitude %

Division Model:

USH 60 Linearity:

L-11-082 Size:

0.250" Model:

Camp G inter. Cal.

N/A 1.0" Notch 80%

3.4 1.4A'W Delay:

4.136p Range:

4.000 Freq.:

2.25 MHz Center Freq.:

NIA Inter. Cal. I A

Inter. Cal.

N/A M't1 CalNel:

.1217 Energ.

High Exam Angle:

465 Squint Angle:

NIA Inte._Ca._W Final Cal.

0042 3/1712011 Damping:

10000 Reject:

0 Measured Angle:

46" Mode:

Shear I Fa

l.

01_21 PRF Mode:

Auto High SU Freq.:

2.25 MHz Exit Point:

N/A

1. of Elements:

I Couplant Disp. Start:

IF Rectify:

Full Wave Cal. Batch:

06125 Circumferential Orientated Search Unit Dip.Strt I

Rctfy FllWae Config.:

Single Focus:

N/A Inst, Freq.:

2.25 Mlz Shape:

Round Contour:

Flat Type:

Ultragel II Calibration Signal Sweep Mfg.:

Sonotech Reflector Amplitude %

Division Sound Path Wedge Style:

Non-integral 1.0" Notch 80%

3A 1.40" Ax. Gain (dB):

28.0 Circ. Gain (dB):

28.0 Search Unit Cable Exam Batch:

06125 10 Screen Div. =

4.0 in. of Sound Path Type:

RG-174 Length:

V No. Conn.: 0 Type:

Ultragel iI Calibration Block Scan CoverageMfg.:

Sonotech Cal. Block No.:

SQ-123 Upstream[]

Downstream[] Scan dB: NIA Reference Block Reference/Simulator Block

" Gain Signal

?

Sound Path Thickness:

1.0" Die.:

Flat CW []

CCW []

Scan dB:

38 Serial No.:

SQ-23 dB Reflector Amplitude % Division Cal.

k. Temp.: 7l.. Temp. Tool:

558272 Exam Surface:

00 Type:

Cal Block 28.0 1.0" Note 80%

1 I.40" Comp. Temp.:

781" Temp. Tool:

581272 Surface Condition:

Flush E

I Recordable Indlcation(s):

Yes L]

No [

(if Yes, Ref. Attached Ultrasonic Indication Report.)

U_

I Results:

NRI RI []

Info f]

Comments: E37688 - Cal Due Date 10I5/2011 658272 - Cal Due Date 1/2912012 Percent Of Coverage Obtained > 90%:

No Reviewed Previous Data:

Yea 53.4% Code Coverage Examiner Level 111(N)

Signature Date Reviewer t

Brown, Thonma 0.

a 3/17/2011 Matt Welch, III I

Examiner Level N/A Signature Date Site Review Signature Date NIA NIA Other Level N/A Signature Date ANII Review

/eiyature Date N/A l t C=

5, NY K

UT Calibration/Examination.

A UT Calibratior xamination Site/Unit:

Summary No.:

Workscope:

BFN I

2 06510-i3i-BFN2 Procedure:

Procedure Rev.:

Work Order No.:

N-UT-62 4

241i4.6.G Outage No.:

U2RF16 Report No.:

UT-11-043 Page:

6 of a

181 Code:

Section xl11995 Edl1996 Add Cat./Item:

R-AIRI,160 Location:

Reactor Building, Main Steam Tunnel Drawing No.:

2481-0272-C-01 Oescrption: EL - VLV System ID:

069 - Reactor Water Cleanup System Component ID: RCRD-2-B0 Size/Length:

N/A Thickness/Diameter 0.53114" Limitations:

None Start Time:

2338 Finish Time:

2344 Instrument Settings Search Unit Cal.

Time Date Axial Orientated Search Unit Serial No.:

E37088 Serial No.:

SB04BO C

-e Calibration Signal Sweep Sound Path Manufacturer:

KRAUTKRAER Manufacturer KA Initial Cal.

2130 3120 Reflector Amplitude %

Division Model:

USN 60 Linearity:

L-11-002 Size:

0.260" Model:

CGmp G Inter. Cal.

NWA 0.5" Notch 80%

6.1

.916" Delay:

4,885P Range:

1.500 Freq.:

2.25 MHz Center Freq.:

N/A Inter. Cal.

'N/A M'tl CaNel:

.1273 Energy:

High Exam Angle:

Goo Squint Angle:

NIA intl Cal.

NIA Damping:

1000o Reject:

0 Measured Angle:

604 Mode:

Shear PRF Mode:

Auto High SU Freq.:

2.25 MHz Exit Point:

NIA

1. of Elements:

1 p____

Cal. Batch:

06126 Circumferential Orientated Search Unit Disp. Start:

IP Rectify:

Full Wave Config.:

Single Focus:

NIA C.

tch:

11 Clrati on S ig nal S e pr Souni t Is.Fe. 2.0 Type:

Ultragel II iCalibration Signal Sweep SudPt Inst. Freq.:

2.25 MHz Shape:

Round Contour:

Flat My.:

Sonoch Reflector Amplitude %

Division Wedge Style:

Non-Integral N/A N/A N/A IVA Ax. Gain (dB):

45.0 Ciro. Gain (dB):

N/A Search Unit Cable Exam Batch:

06125 1

Screen Div. =

.16 In. of Sound Path Type:

RG-174 Length:

6' No. Conn.: 0 Type:

Ultragel l1 Mfg.:

Sonotech Calibration Block Scan Coverage i

I Cal. Block No.:

SQ-123 Upstreamj-Downstremjn Scan dB: 48 Reference Block Reference/Simulator Block Thickness:

0.r" Die.:

Flat CCW[] Scan d I:

WA Serial No.:

SQ-123 Gain Signai sweep Sound Path CW E________Scand_

dB Reflector Ampnltd Division Cal. Blk. Temp.: 70.

Temp. Tool:

558272 Exam Surface:

on Type:

Cal Block 46.0 0.5" Moth 50%

6.1

.915" Comp. Temp.:

760 Temp, Tool:

558272 Surface Condition:

Flush Recordable Indication(s):

Yes []

No W (if Yes, Ref. Attached Ultrasonic Indication Report.)

Results:

NRI []

RI []

Info F1 Comments: E37668 - Cal Due Date 10/512011 558272 - Cal Due Date 112912012 Percent Of Coverage Obtained > 90%:

No Reviewed Previous Date:

Yes 53.4% Code Covetage Examiner Level Ill(N)

Signature Date Reviewer Signature Date Bmwn, Thomas D.

3/17/2011 Mtt Welch, Liii Examiner Level N/A Signature Date Site Review Signature Date NIA N/A Other Level NWA Signature Date ANII Review n

.lure Date NWA I-*Z. '

CY Nf a

LIT Calibration/Examinatlon C.

.000527 pplemental Report Su;

,.ummary No.: 055104SI-BFN2 Examiner Brown, Thomas D&,

Level Examiner. NIA Level Other NIA Level Report No.:

Page':

111N Reviewer: Matt Welch, LIII NIA Site Review: NIA NIA ANII Review:

UT-I 1-043 7

.of 8

Date:

Date:_____

Date:'f3 (11 m

Comments: None Sketchi or Photo: O:XlddeaIServer~IddeaLBFNXDocumentatlonWU2Ri6 Scanned DatsxRCRD-2-5O Coverage Plot.jpg

'Reju19D 15"AM 401-uLiE4gL)

ZlZCU.L4A4(Jl

• Z IZ Z2

.41 Vau mE ~&L)& 2.1Zc

/-w~-

6QUAED

-A

• ~*

.2.

/to I/

WA o&L W41

'sonw

• ~~A z~44~

5A.?7~

..s 5.. K.4.yi*/

4.97%"4-19M.W0 Supplemental Report

000528 Supplemental Report Report No-:

UT-11-043 Pane:

R

_f a

urimmary No.: 05510-S1I-BFN2 Examiner: Brown, Thomas 121FA Level: III(N)

Examiner: NIA Level:

NIA Other:

NIA Level:

WA Reviewer: Matt Welch, LIII Site Review: N/A

/

ANII Review:

Date: _____

Date:

Date:

Comments: None Sketch or Photo: O:\\tddel Server~lddealBFN\\Documenta~ton\\U2R1G Scanned Data\\RCRD-2-50 T&C.jpg Record Thickness Measurements As Indicated, Including Weld Width, Edge-To.Edge At 00 Position 0; 90' 180" 270'

[]

El Weld Weld Edo*

Centerline Flow.-

CROWN HEIGHT:

7_ PA'EP DIAMETER:

CROWN WIDTH:

0" WELD LENGTH:

ILL/.

/,0-I a'.

RL

£150 60*

A10' S'IS ~L cCucw-O, Aiorse4AJ 9io'~ 4.1640 /"dt I-P5 77J t 3oz-j Ajje4 QA47.,v "J

77V&d RL.

T7ZA*S&)CJ7 i?--J gcjg 7-o~1 771/4 SdA6.4

&-Awi6& 7-Zd4pJo~c~,4P ozjd -

U.'sWa F't2L rw,4 r,)r,jq~We o~i

£id-11O4T~

.ws4a Supplemental Report

1' UT Calibratior xamination Site/Unit:

Summary No.:

Workscope:

BFN

/

2 05507-1SItBFN2 IS' Procedure:

Procedure Rev.:

Work Order No.:

N-UT-U4 I1I 2-51-4.56.

Outage No.:

U2RF16 Report No.:

UT-I 1-032 Page:

I of 3

Code:

Section X1 1995 Ed/1996 Add CateItem:

R-ARI.16D Location:

Reactor Building Drawing No.:

2-1S1-0221-C-01

==

Description:==

VLV - FH System ID:

074 - Residual Heat Removal System Component ID: DRHR-2-03 Size/Length:

NIA Thickness/DIameter 1.219124" Limitations:

See Coverage Plot Start Time:

158S Finish Time:

1745 Instrument Settings Search Unit Cal.

Time Date Axial Orientated Search Unit Sedal No.:

E35305 Serial No.:

01FFWK Checks Calibration Signal Sweep Sound Path Manufacturer.

KRAUTKRAMER Manufacturer:

KBA Initial Cal.

1463 3/1212011 Reflector Amplitude %

Division Model:

USH 60 Linearity:

L-11-005 Size:

0.6" Model:

Camp G ItrCa. 26 3/1212011' 1." Notch 80%

4.2 2.14" Delay:.

8.2 27 5p Range:

5.000 Freq.:

1.5 MHz Center Freq.:

NMA Inter. Cal.

1A

______inter.

Cal.

N/A M1I Caiela:

.1221 Energy:

High Exam Angle:

460 Squint Angle:

N/A Final Cal.

1751 3/12/2011 Damping:

1000 Q Reject:

0 Measured Angle:

46" Mode:

Shear Coupiant PRF Mode:

Auto High SU Freq.:

1.6 MHz Exit Point:

NIA

1. of Elements:

1 Cal. Batch:

10325 Circumferential Orientated Search Unit DInp. Start:

IP Rectify:

Full Wave ConfMg.:

Single Focus:

N/A Type:

Ultragel II Calibration Signal Sweep Inst. Freq.:

2.0 MHz Shape:

Round Contour:

Flat Mfg.:

Sonotaci Reflector Anplitude %

Division Sound Path Wedge Style:

Non-Integral 15 Batc:

10326 1." Notch 80%

4.2 2.14" Ax Gain (dB):

23.0 Circ. Gain (dB):

23.0 Search Unit Cable Typo:

Ultragel 11 1

Screen Div. =

.50 in. of Sound Path Type:

RG-174 Length: 6' No. Conn.: 0 Mfg.:

Sonotech Calibration Block Scan Coverage Cal. Block No.:

WB-85 Upstremg-DownatreerrZ Scan dB: 42 Reference Block Refsrence/Slmulator Block Thickness:____

1.5..

s:

Flt

42 Seia

o.

7038Gain Signal Sweep Sound Patt Thickness:

1.5" Die.:

Flat CW [

CCWJ Scan dB:

42 Serial No.:

700398 dB Reflector Amplitude % Division Cal. Blk. Temp.: 70__1 Temp. Tool:

568274 Exam Surface:

0D Type:

Rompas 33.0 8DJH 60%

11.9 1.04" Comp. Temp.:

78* Temp. Tool:

558274 Surface Condition:

Ground Recordable Indication(s):

Yes []

No [

(if Yes, Ref. Attached Ultrasonic Indication Report.)

Comments: E36305 - Cal Due Date 12/2J2011 Results:

NRI RI Info LI 558274 - Cal Due Date 1/2/12012 Percent Of Coverage Obtained > 90%:

No Reviewed Previous Data:

Yes 89.5% Code Coverage Examiner Level 11(N) 7J 41an ture Date Reviewer 4

S qi u~,Dt Kelejan, Michael W.

311212011 Mett Welch, Lill Examiner Level WA igaueDate Site Review Signature Date N/A N/A Other Level NIA Signature Date ANII Review Signature Date NIA UT Calibration/Examination

/

C C

C(

Supplemental Report Report No.:

.,ummary No.: 05507-1SI-BFN2 Examiner.

einian,,Michael W.

Examiner: NIA Level:

NIA Other NIA Level:

NIA

///

t.'age:

Reviewer:. Matt Welch, LIII Site Review: N/A ANII Review:

000485 UT-I1 -032 2

of 3

Date: ____

Date:

Date:

Comments: Norio Sketch or Photo: O:l\\ddealServeNddealdBFN\\Documentation\\U2Rl6 Scanned DataDRHR-2-03 Coverage Plot.jpg I

MA FLOW HEAO

'a-i*

V4L YEC rc\\, -7'( S5ý I.

P

't-'

0 SCovEI sjA~*

7,*1 i

SCAM #-'

7r~~4 7/,OL4 A007-~l'~.c rl

-r~rfet a;bmktl

.44&.t A~ '7( -

Z I~

f

-2 Supplemental Report

£ hSupplemental Report Report No.:

Page:

.ummary No.: 05507-1SI.BFN2 Examiner. Kleinjan, Mh W.

f evel:

II(N)

Reviewer: Matt Welch, LIII Examiner: NIA Level:

NIA Site Review. NIA Other: NIA Level:

WA ANII Review:

00486 UT-t1-032 3

of 3

Date; ____

Date: _____

Date:

Comments: None Sketch or Photo: O:\\lddealServerUddeal_BFNYDocumentatfonfU2R16 Scanned DataXDRHR-2-O3 T&C.jpg Rocord Tkidltne.

Mossuremmeis As Indl"eabd, IfteUdifi edWdh Edge.TO.Edge Ai 0%Wl Wdh Weld

• Weld Upi

• Z" I

s V,4LV6 FCV-7q1-3-3 ~~

1~

Supplemental Report

UT Calibratior xamination 7

SitelUnit:

Summary No.:

Workscope:

BFN I

2 05479-ISI-B.FN2 1s1 Procedure:

Procedure Rev.:

Work Order No.:

N-UT-64 111 2-Si14.6.G Outage No.:

U2RF16 Report No.:

UT-11-023 Page:

1 of 4

Code:

Section Xi 1095 Ed/11996 Add Cal./item:

R-AIR1.18C Location:

Reactor Building - Drywall Drawing No.:

2-IS.-0270-C-0i

==

Description:==

,DL

- P System ID:

068 - Reactor Water Recirculating System Component ID: GR-2-09 Size/L-ength:

WA Thickness/Diameter 0.569 112" Limitations:

None Start Time:

1428 Finish Time:

1449 Instrument Settings Search Unit Cal.

Time Date Aial Orientated Search Unit Serial No.:

E36302 Serial No.:

01FHSL Checks Calibration Signal Sweep Sound Path Manufacturer.

KRAUTKRAMER Manufacturer:

KBA Initial Cal.

0930 311512011 Reflector Amplitude %

Division Model:

USN 60 Linearity:

L-11-006 Size:

0.5" Model:

Comp G inter. Cal.

'142 3115162011 1.0" Notch 80%

4.7 1.40" SInter. Cal.

N/A Delay:

6.9697P Range:

3.000 Freq.:

1.5 MHz Center Freq.:

NIA Inter. Cal.

W/A ___

Mtl Cal/el:

.1261 Energy:

High Exam Angle:

45' Squint Angle:

NA Final Cal. I1556 315/2011 Damping:

1000 Reject:

0 Measured Angle:

4" Mode:

Shear Coupiant I

PRF Mode:

Auto High SU Freq.:

1.6 MHz Exit Point:

NIA

1. of Elements:

I Cal. Batch:

10325 Circumferential Orientated Search Unit Disp. Start:

IP Rectify:

Full Wave Config.:

Single Focus:

N/A Type:

Ultragel Ii Calibration Signal Sweep Sound Path Inst. Freq.:

2.0 MHz Shape:

Round Contour:

Flat Mfg.:

Sonotech Reflector Amplitude %

Division Wedge Style:

Non-integral Exam Batch:

10325 1.0" Notch 80%

4.7 1.40" Ax. Gain (dB):

21.4 Ciro. Gain (dB):

21.4 Search Unit Cable Type:

Ultragel 11 I

Screen Div. =

.30 in. of Sound Path Type:

RG-174 Length: V No. Conn.: 0 Mfg.:

Sonotech Calibration Block Scan Coverage Cal. Block No.:

SQ-123 UpstreamF]

Downstream--

Scan dB:

35 Reference Block ReferencelSimulator Block Thickness:

1.0" Die.:

Flat CW 6 CCW-] Scan dB:

35 SerialNo.:

78_31 dB Reflector Amplitude % Division dPath Cal. Blk. Temp.: 680 Temp. Tool:

531093 Exam Surface:

OD Type:

Rompas I.4 FSDHJ 18%

3.5 1.02" Camp. Temp.:

77.

Temp. Tool:

631993 Surface Condition:

Ground Recordable Indication(s):

Yes jJ No [

(if Yes, Ref. Attached Ultrasonic Indication Report.)

Comments:

L Comments: E36302 - Cal Due Date 911 612011.

Results:

NRI S6 RI []

Info []

531993 - Cal Due Date 9118/2011.

Percent Of Coverage Obtained > 90%:

No Reviewed Previous Data:

Yes 75% Code Coverage Examiner Level (N)

Signature Date Reviewer Hilbom, Mark R.

24 311512011 Matt Welch, LIII 4.;W Examiner Level NIA Signature Date Site Review Signatur Do N/A N/A Other Level NIA Signature Date ANII Review

-Signature oat WA-l

)

b UT Calibration/Examination

UT Calibratior xamination Site/Unit:

Summary No.:

Workscope:

BFN I

2 054794SI-BFN2 ISI Procedure:

Procedure Rev.:

Work Order No.:

N-UT-64 Outage No.:

U2RF16 Report No,:

UT-11-023 Page:

2 of 4

2-814.6.G Code:

Section X 1995 Ed/I996 Add Cat/Item:

R.A/Rl.16C Location:

Reactor Building - Drywall Drawing No.:

2-481-0270-C-01

==

Description:==

SDL - P System ID:

068 - Reactor Water Recirculating System Component ID: GR-2-09 Size/Length:

N/A Thickness/Diameter 0.659112" Limitations:

None Start Time:

1451 Finish Time:

1507 Instrument Settings Search Unit Cal.

Time Date AxIal Orientated Search Unit Serial No.:

E36302 Serial No.:

86-699 Checks C

Manufacturer:

KRAUTKRAMER Manufacturer:

RTD Initial Cal.

0937 3/1512011 Reflector Amplitude %

Division Model:

USN 60 Unearity:

L-11-006 Size:

2 (1Ox18mm)

Model: TRL2-AUST Inter. Cal.

1480 3/1612011 1.0" Notch 80%

6.5 1.90" Delay:

10.2906p Range:

3.500 Freq.:

2.0 MHz Center Freq.:

N/A Inter. Cal.

NIA i M'ti Cal/Vel:

.2369 Energy:

High Exam Angle:

W8 Squint Angle;

9..

Inter. Cal. I NIA

__/_5/_011 DamFinal Cat.

160 3/1ect/0011 Damping:

10000 Reject:

0 Measured Angle:

G0o Mode:

LONG PRF Mode:

Auto High SU Freq.:

2.0 MHz Exit Point:

N/A

1. of Elements:

2 Coup I

Disp. Start:

IP Rectify:

Full Wave Conflg.:

D-SBS Focus:

FS-30 Cal. Batch:

10325 Circumferentlmt Orientated Search Unit Inst. Freq.:

2.0 MHz Type:

Ultraget II Calibration Signal Sweep Shape:

RECT Contour Fiat Mfg.:

Sonotech Reflector Amplitude %

Dsiono Wedge Style:

Integral M__R c

A t

%iP Ax. Gain (dB):

84.1 Clrc. Gain (dB):

N/A Search Unit Cable Exam Batch:

10325 N/A NI A N/A NA I

Screen Div. a

.35 in. of Sound Path Type:

RG-174 Length:

6' No. Conn.: 0 Type:

Ultragel II Calibration Block Scan Coverage Mfg.:

Sonotech Cal. Block No.:

SQ.123 Upstream[I]

Downstrearen Scan dB: 84.1 Reference Block Reference/Simulator Block Thickness:

1.0" D.:

Flat ESSerial No.:

Gain Signal Sweep Sound Path ThCa.kn emp.:

1.8" T

em.To:

Flt531 cr-cn R

IA

SralN, 393 dB Reflector Amplitude % Division Cal. Bik. Temp.:

8--

Temp. Tool:

531993 Exam Surface:

OD Type:

Rompns 79.4 FSDH 60%

4.0 1.40" Comp. Temp.:

77_'_ Temp. Tool:

531993 SufcCodtn:rud 1-.-

Surface Condition:

Ground Recordable Indication(s):

Yes El No 9 (If Yes, Ref. Attached Ultrasonic Indication Report.)

Results:

NRI S6 RI E]

Info []

Comments: E36302 - Cal Due Date 911812011.

531993 - Cal Due Date 9/15/20t1.

Percent Of Coverage Obtained > 90%:

No Reviewed Previous Data:

Yea 75% Code Coverage Examiner Level 11(N)

Signature Date Reviewer S_ nu p;ate H,,bo, Mark,,.

3/15,201 Matt Welch, Lill 4,,,

Examiner Level NIA Signature Date Site Review Signature Date N/A N/A Other Level N/A Signature Date ANII Review Signature Date N/A

'li gs'fai 3Ihd UT~~~~~

CamrtfnEamnto I

Ia 00 10 LIT Calibration/Examination r

r

000383 SU!

Qummary No.: 05479-ISI-BFN2 Examiner: Hilbomn Mark R fItd Level Examiner: NIA Level Other:

NIA Level pplemental Report Report No.:

UT-t 1-023 Pn.a*

nf 4

(N)

Reviewer: Matt Welch, LIll I: NIA Site Review. NIA W:

N/A ANII Review:

/#r Z

Date:

Date: _____

Date:,6d.

Comments: None Sketch or Photo: O:\\lddeaLSeterveddeaLBFlMDocumentatlon\\U2R18 Scanned DataGR-2-O9 Coverage PIot.jpg

"~~~~

-VVcM 4

S o,*

• -(a 17;

.k*..

0oL 3 4 H

a=

04 aa 1A-cje.Vt b

• .,W-%4 r IPE

-I S

Q Ct-too;~-

i.

i Supplemental Report

Supplemental Report Report No.

Page

.zummary No.: 05479-1SI-BFN2 Examiner Hilborn, Mark Level:

I1(N)

Reviewer. Matt Welch, LIII Examiner: NIA Level:

NIA Site Review: N/A Other:

NIA Level:

NIA ANII Review:

._,,_Qf _

D:

000384 UT-I1-023 4

of 4

Date:

Date:

f I

01 Comments: None Sketch or Photo:.O:UddeeLServerkIddaaL-BFNADocumentatlofl\\U2R16 Scanned Data\\GR-2-09 T&C.Ipg beard Thlkkness lhUUiftnMaI As.

.Weld IniOsla.

boekding Weld-WIdU.,

Ica-,.s 4;

L Efts-TO-Edg, At 0'd I*

I S

S

• Weld Edlf peemon I a

.s, 10W 2r I

VJ/A'1 JS

/

71A CROWN HEIGHTi frLU. 5 4 O'QWH wicM:

/.Z WLD UM -j~.37.7' pLow IS It ANC-t4 CL I

I 1

°'r

%W I,&,

Supplemental Report