ML061980068

From kanterella
Jump to navigation Jump to search
Inservice Inspection Report
ML061980068
Person / Time
Site: Calvert Cliffs Constellation icon.png
Issue date: 07/10/2006
From: Spina J
Constellation Energy Group
To:
Document Control Desk, Office of Nuclear Reactor Regulation
References
Download: ML061980068 (224)
v • d • e


Text

James A. Spina Calvert Cliffs Nuclear Power Plant, Inc.

Vice President 1650 Calvert Cliffs Parkway Lusby, Maryland 20657 410.495.4455 410.495.3500 Fax Constellation Energy, Generation Group July 10, 2006 U. S. Nuclear Regulatory Commission Washington, DC 20555 ATTENTION: Document Control Desk

SUBJECT:

Calvert Cliffs Nuclear Power Plant Unit No. 1; Docket No. 50-317 Inservice Inspection Report

REFERENCE:

(a) American Society of Mechanical Engineers, Boiler & Pressure Vessel Code,Section XI, Article IWA-6000 Pursuant to Reference (a), please find enclosed the Inservice Inspection Report for the Calvert Cliffs Nuclear Power Plant Unit 1. This inspection fulfilled the intentions and requirements stated in our commitment to comply with the American Society of Mechanical Engineers, Boiler & Pressure Vessel Code,Section XI, Inservice Inspection Requirements.

Should you have questions regarding this matter, please contact Mr. L. S. Larragoite at (410) 495-4922.

Very truly yours, JAS/CAN/bjd

Enclosures:

(1) Calvert Cliffs Nuclear owver Plant, Inservice Inspection Summary Report for Calvert Cliffs Unit 1, ASME Boiler & Pressure Vessel Code Section XI, Form NIS-1 (2) Calvert Cliffs Nuclear Power Plant, Inservice Inspection Summary Report for Calvert Cliffs Unit 1, ASME Boiler & Pressure Vessel Code Section XI, Form NIS-2 cc: Mr. Craig Lowry (Without Enclosures)

P. D. Milano, NRC Resident Inspector, NRC S. J. Collins, NRC R. I. McLean, DNR

ENCLOSURE (1)

CALVERT CLIFFS NUCLEAR POWER PLANT, INSERVICE INSPECTION

SUMMARY

REPORT FOR CALVERT CLIFFS UNIT 1 ASME BOILER & PRESSURE VESSEL CODE SECTION XI, FORM NIS-1 Calvert Cliffs Nuclear Power Plant, Inc.

July 10, 2006

Page 1 of 3 FORM NIS-1 OWNER'S REPORT FOR INSERVICE INSPECTIONS (As required by the Provisions of the ASME Code Rules)

1. Owner Constellation Energy, 750 East Pratt Street, Baltimore, MsyD 21202 (Name and Address of Owner)
2. Plant Calvert Cliffs Nuclear Power Plant, 1650 Calvert Cliffs Parkway, Lusby, MD 20657 (Name and Address ofPlant)
3. Plant Unit 1
4. Owner Certificate ofAuthorization (if required) N/A
5. Commercial Service Date 05/08/1975
6. National Board Number for Unit 20911
7. Components Inspected Component or Manutfcturer or Manufacturer or Installer State or Province National Board No.

Appurtenance Installer Serial No. No.

Reactor Pressure Vessel Combustion Engineering CE-67107 14000NV 20911 Pressurizer Combustion Engineering CE-67602 14000NV 20915 Steam Generator # 11 Combustion Engincering CE-67504 14000NV 20922 Steam Generator #12 Combustion Engineering CE-67505 14000NV 20923 Reactor Coolant Piping Combustion Engineering N/A N/A N/A Safety Injection Bechtel 1N/A N/A N/A Piping/Supports Pressurizer Spray Bechtel N/A N/A N/A Piping/Supports Pressurizer Safety & Relief Bechtel N/A N/A N/A Piping/Supports Shutdown Cooling Bechtel N/A N/A N/A Piping/Supports Main Steam Piping/Supports Bechtel N/A N/A N/A Feedwater Piping/Supports Bechtel N/A N/A N/A Charging Piping/Supports Bechtel N/A N/A N/A Letdon Piping/Supports Bechtel N/A N/A N/A Containment Spray Bechtel N/A N/A N/A Piping'Supports I I

8. Examination Dates 7/21/2004 to 4/712006
9. Inspection Period Identification: Second 2002 to 2006
10. Inspection Interval Identification: Third 1999 to 2009
11. Applicable Edition of Section XI 1998 Addenda None
12. Date/Revision of Inspection Plan: CCNPP Units 1 &2 Third Interval ISI Plan, Revision 0

Page 2 of 3 NIS-1 a statement concerning status of work required for the

13. Abstract of Examinations and Tests. Include a list of examinations and tests and Inspection Plan.

inspections performed at Calvert Cliffs Unit 1, The examinations reported herein constitute the seventeenth report of inservice interval during commercial operation. The and the second report within the second inspection period of the third inspection Cliffs I &2 and our Risk Informed ISI examinations were performed in accordance with the Third Interval ISI Plan for Calvert in accordance with the 1998 Edition of performed Program Submittal to the NRC dated 5/2912002. The examinations were we performed bare metal the ASME Section XI required examinations ASME Code Section XI with No Addenda. In addition to containing Alloy 82/182 weld material in visual and ultrasonic examinations on a number of dissimilar metal butt welds 1 for a list of Class I and 2 See Attachment accordance with the EPRI MRP recommendations and NRC Bulletin 2004-01. review at the plant site for review.

and procedures are available for components examined. Nondestructive examination data

14. Abstract of Results of Examinations and Tests.

the Calvert Cliffs Unit 1 2006 RFO. Two of Indications were found in three (3) of the dissimilar metal welds examined during Vessel Code Section Xl, Subsection IWB the indications exceeded the acceptance standards of ASME Boiler & Pressure in the 12 inch hot leg surge nozzle to safe standards were found Article IWB-3500. Indications which exceeded the IWB 3500 132450). These two welds have indications end weld (LTP 111100) and the 2 inch hot leg drain nozzle to safe end weld (LTP An axial indication was detected in the on the inside surface of the nozzle safe-ends which are circumferential in orientation. is within the acceptable limits of 123450). The size of this indication pressurizer relief valve nozzle to safe-end weld (LTP operating temperature of these nozzles and the Article IWB-3500. The proximity of the flaws combined with the relatively high of all three flaws is primary water stress absence of fabrication RT or baseline exam indications suggest that the cause corrosion cracking (PWSCC).

15. Abstract of Corrective Measures.

Process" (MSIP) has been performed at A stress improvement mitigation technique called "Mechanical Stress Improvement and 4 other locations that did not contain flaws each of the dissimilar metal butt welds locations found to contain indications 1 high temperature DM welds was a pre-all 7 Calvert Cliffs Unit during the current outage. The performance of MSIP on inside pipe wall where the indications are located.

planned outage activity. This method induces compressive stresses on the and piping loads, mitigate any further crack These post-MSIP residual stresses, when added to the normal operating pressure propagation due to PWSCC.

flaw evaluation was carried out for each nozzle, To ensure the mitigation is technically sound and acceptable, an analytical the as-found flaws are within the Code maximum XI, Article IWB 3600, to determine if using the rules of ASME Code Section to be negligible because of the compressive allowable. Fatigue and PWSCC crack growth was considered and found ASME Code Section XI rules and is consistent with the stresses over the entire length of the flaw. The evaluation used Guideline. The results of this evaluation System Piping Butt Weld Inspection and Evaluation guidelines of MRP-1 39, Primary were forwarded to the NRC in a Constellation Energy letter dated 5/31/2006.

RFO to eliminate the Alloy 600 materials from that The Unit I Reactor Vessel Closure Head was replaced during the 2006 downstream of check valve 1-FW-130 due to FAC component. A small spool piece was replaced in SG feedwater piping concerns.

and tests meet the Inspection Plan as required by We certify that a) the statements made in this report are correct, b) the examinations of the ASME Code,Section XI.

the ASME Code, Section XM, and c) corrective measures taken conform to the nrles N/A Expiration DIate WA Certificate of Authorization No. ( if applicable)

By Keith M Hoffman Date 6/22/2006 Signed Constellation Energy Owner

Page 3 of 3 NIS-1 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Maryland . and employed by ABS Consulting of Houston, TX have inspected the components described in this Ower's Report during the period 7/21/2004 to 4/7/2006 , and state that to the best of my knowledge and belief, the Owner has performed examinations and tests and taken corrective measures described in this Owner's Report in accordance with the inspection plan and as required by the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations, tests, and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

Rene Garceau (.#*-r.9. Commissions NB-6030, VT-604, ANII In4pector's Signature National Board, State, Province, and Endorsements Date 6/22/2006

Page 1 of 20 Attachment I Inservice Inspection Report Interval 3, Period 2, 1RFO17

1. Owner: Constellation Energy, 750 East Pratt Street, Baltimore 4. Owner Certificate of Authorization (If Req.): NIA
2. Plant: Calvert Cliffs Nuclear Power Plant, 1650 Calvert Cliffs F 5. Commercial Service Date: 0510811975
3. Plant Unit: 1 6. National Board Number for Unit: 20911 Summary No. Comp. ID Comp. Desc. Item Procedure Method/Report/Results System DwgIlSO Exam Date Class 1 Category B-D 004150 16-405A NOZZLE TO HEAD WELDS B3.110 NDE-5419-CC UT CC06-IU-065 Accept 064 2/2612006 Comments: Coverage limited due to configuration. Consider for relief. No recordable indications noted 004200 16-405B NOZZLE TO HEAD WELDS B3.110 NDE-5419-CC UT CC06-IU-066 Accept 064 2/26/2006 Comments: Coverage limited due to configuration. Consider for Relief. Previous indications verified. No new indications recorded 004350 16-405A-IRS NOZZLE INSIDE RADIUS SECTION B3.120 NDE-5417-CC UT CC06-IU-060 Accept 064 2/2612006 Comments: NO RECORDABLE INDICATIONS 004400 16-405B-IRS NOZZLE INSIDE RADIUS SECTION B3.120 NDE-5417-CC UT CC06-IU-067 Accept 064 2/26/2006 Comments: NO RECORDABLE INDICATIONS 005505 11-W5-IRS 11 HL NOZZLE EXTENSION INSIDE B3.140 NDE-5417-CC UT CC06-IU-038 Accept 064 2/23/2006 Comments: NO RECORDABLE INDICATIONS 005555 11-W6-IRS 11A CL NOZZLE EXTENSION INSIDE B3.140 NDE-5417-CC UT CC06-IU-039 Accept 064 2/2312006 Comments: NO RECORDABLE INDICATIONS" -

005605 1 1-W7-IRS 11B CL NOZZLE EXTENSION INSIDE B3.140 NDE-5417-CC UT CC06-IU-040 Accept 064 212312006 Comments: NO RECORDABLE INDICATIONS Class I Category B-G-1 003500 STUD NUMBERS 19 RPV STUDS B6.30 NDE-5415-CC UT CC06-IU-084 Accept 064 3/9/2006 THROUGH 36 NDE-5100-CC MT CC06-IM-004 Accept 064 3/10/2006 NDE-5415-CC UT CC06-IU-085 Accept 064 3/10/2006 NDE-5415-CC UT CC06-IU-086 Accept 064 3/11/2006 NDE-5100-CC MT CC06-IM-005 Accept 064 3/11/2006 NDE-5100-CC MT CC06-IM-006 Accept 064 3/11/2006 Comments: No relevant indications noted.

003550 NUTS 19-36 RPV NUTS 1- 54 B6.10 NDE-5712-CC VT CC06-IV-166 Accept 064 3/11/2006 NDE-5712-CC VT CC06-IV-169 Accept 064 3/11/2006 NDE-5712-CC VT CC06-1V-159 Accept 064 3/9/2006

Page 2 of 20 Attachment I Inservice Inspection Report Interval 3, Period 2, IRFOI7

1. Owner: Constellation Energy, 750 East Pratt Street, Baltimore 4. Owner Certificate of Authorization (If Req.): N/A
2. Plant: Calvert Cliffs Nuclear Power Plant, 1650 Calvert Cliffs F 5. Commercial Service Date: 0510811975
3. Plant Unit: I 6. National Board Number for Unit: 20911 Summary No. Comp. ID Comp. Desc. Item Procedure Method/Report/Results System Dwg/ISO Exam Date Comments: No recordable indications noted.

003600 WASHER RPV WASHERS 1-54 16.50 NDE-5712-CC VT CC06-IV-160 Accept 064 31912006 NUMBERS 19 THROUGH 36 NDE-5712-CC VT CC06-IV-170 Accept 064 3/11/2006 NDE-5712-CC VT CC06-IV-165 Accept 064 3/11/2006 Comments: Light corrosion noted on the ID surface of most of the washers.

004550 MANWAY MANWAY STUDS 1-20 B7.20 NDE-5712-CC VT CC06-IV-252 Accept 064 U-1 A-3 3118/2006 STUDS/NUTS 1-20 Comments: Minor dings noted on the stud threads from not protecting the treads when remove d.

005705 11 SG OUTLET OUTLET SIDE MANWAY STUDS 86.90 NDE-5712-CC Vr CC06-IV-052 Accept 064 2/23/2006 SIDE MANWAY Comments: No Recordable Indications Noted.

005755 11 SG OUTLET 11 SG CL MANWAY NUTS AND B6.100 NDE-5712-CC VT CC06-IV-053 Accept 064 U-1 A-5 2/23/2006 SIDE MANWAY WASHERS Comments: No Recordable Indications Noted.

005805 11 SG INLET SIDE 11 SG INLET SIDE MANWAY STUDS B6.90 NDE-5712-CC VT CC06-IV-051 Accept 064 2/2312006 MANWAY Comments: No Recordable Indications Noted 005855 11 SG INLET SIDE INLET SIDE MANWAY NUTS AND B6.100 NDE-5712-CC VT CC06-IV-050 Accept 064 U-1 A-5 2/23/2006 MANWAY WASHERS Comments: No Recordable Indications Noted 133600 11B-S-i THROUGH RCP- 1B STUDS B6.180 NDE-5415-CC UT CC06-IU-076 Accept 064 3/11/2006 16 Comments: No Recordable Indications Noted

Page 3 of 20 Attach Inservice Insp Interval 3, Per

1. Owner: Constellation Energy, 750 East Pratt Street, Baltimore 4. Owner Certificate of Authorization (If Req.): NIA
2. Plant: Calvert Cliffs Nuclear Power Plant, 1650 Calvert Cliffs F 5. Commercial Service Date: 0510811975
3. Plant Unit: I 6. National Board Number for Unit: 20911 Summary No. Comp. ID Comp. Desc. Item Procedure Method/Report/Results System Dwg/ISO Exam Date 133650 11B-N-1 THROUGH RCP-11B NUTS B6.200 NDE-5712-CC VT CC06.IV-172 Accept 064 3/13/2006 16 Comments: No Recordable Indications Noted 133700 PUMP FLANGE RCP-11B 86.190 NDE-5712-CC VT CC06-1V-171 Accept 064 3/12/2006 SURFACE Comments: No Recordable Indications Noted Class 1 Category B-G-2 133500 11A-C-1 THROUGH RCP-11A SEAL BOLTING B7.60 NDE-5712-CC VT CC06-IV-033 Accept 064 212212006 16 Comments: No Recordable Indications Noted 134050 111B-C-I THROUGH RCP-11B SEAL BOLTING B7.60 NDE-5712-CC VT CC06-IV-034 Accept 064 2/22/2006 16 Comments: No Recordable Indications Noted 135150 12B-C-1 THROUGH RCP-12B SEAL BOLTING B7.60 NDE-5712-CC VT CC06-IV-038 Accept 064 2/22/2006 16 Comments: No Rejectable Indications Noted.

136150 1-MOV-614 ON 12- VALVE BODY BOLTING B7.70 NDE-5712-CC VT CC06-1V-085 Accept 052 91100 314/2006 SI-1009 Comments: No Recordable Indications Noted 136200 1-MOV-624 ON 12- VALVE BODY BOLTING B7.70 *NDE-5712-CC VT CC06-IV-096 EngDisp 052 91100SHOO02 3/4/2006 SI-1010 Comments: Valve was worked under MO1200600815 and verified no leakage at startup.

136250 1-MOV-634 ON 12- VALVE BODY BOLTING B7.70 NDE-5712-CC VT CC06-IV-084 Accept 052 91100SHOO03 3/4/2006 S1-1011

Page 4 of 20 Attach Inservice InsF Interval 3, Pei

1. Owner: Constellation Energy, 750 East Pratt Street, Baltimore 4. Owner Certificate of Authorization (If Req.): NIA
2. Plant: Calvert Cliffs Nuclear Power Plant, 1650 Calvert Cliffs F 5. Commercial Service Date: 0510811975
3. Plant Unit: I 6. National Board Number for Unit: 20911 Summary No. Comp. ID Comp. Desc. Item Procedure Method/Report/Results System Dwg/ISO Exam Date Comments: No Recordable Indications Noted 136300 1-MOV-644 ON 12- VALVE BODY BOLTING B7.70 NDE-5712-CC VT CC06-IV-098 Accept 052 91100SH0004 3/412006 SI-1012 Comments: No recordable indications.

136350 1-CV-1OOE ON 3-PS- VALVE BODY BOLTING 87.70 NDE-5712-CC VT CC06-1V-076 Accept 064 91099SH0001, 2/24/2006 1001 SH0002 Comments: No Recordable Indications Noted 136400 1-CV-100F ON 3-PS- VALVE BODY BOLTING B7.70 NDE-5712-CC VT CC06-IV-069 Accept 064 91099SH0002 2/24/2006 1002 Comments: No Recordable Indications Noted 136450 1-MOV-403 ON 2.5- VALVE BODY BOLTING B7.70 NDE-5712-CC VT CC06-IV-029 Accept 064 91098SH0002 2/22/2006 SR-1003 Comments: No Recordable Indications Noted 136500 1-MOV-405 ON 2.5- VALVE BODY BOLTING B7.70 NDE-5712-CC VT CC06-IV-028 Accept 064 91098SH000I 2/2212006 SR-1004 Comments: No Recordable Indications Noted 136550 1-CV-517 ON 2-CV- VALVE BODY BOLTING B7.70 NDE-5712-CC VT CC06-IV-060 Accept 041 FSK-MP-490 2/24/2006 1003 Comments: No Recordable Indications Noted 136800 1-CVC-187 ON 2-CV- VALVE BODY BOLTING B7.70 NDE-5712-CC VT CC06-IV-061 Accept 041 FSK-MP-492 2/2412006 1005 Comments: No Recordable Indications Noted 136850 1-CVC-392 ON 2-CV-VALVE BODY BOLTING B7.70 NDE-5712-CC VT CC06-IV-1i2 041 FSK-MP-492 3/4/2006 1005

Page 5 of 20 Attach Inservice Insl Interval 3, Per

1. Owner: Constellation Energy, 750 East Pratt Street, Baltimore 4. Owner Certificate of Authorization (If Req.): NIA
2. Plant: Calvert Cliffs Nuclear Power Plant, 1650 Calvert Cliffs F 5. Commercial Service Date: 0510811975
3. Plant Unit: I 6. National Board Number for Unit: 20911 Summary No. Comp. ID Comp. Desc. Item Procedure Method/Report/Results System Dwg/ISO Exam Date 136950 1-CVC-435 ON 2-CV- VALVE BODY BOLTING B7.70 NDE-5712-CC VT CC06-IV-062 Accept 041 FSK-MP-492 2124/2006 1006 Comments: No Recordable Indications Noted 137100 1-CV-515 ON 2-LD- VALVE BODY BOLTING B7.70 NDE-5712-CC VT CC06-IV-066 Accept 041 FSK-MP-455,- 2/24/2006 1004 456 Comments: No Recordable Indications Noted 137200 1-CV-516 ON 2-LD- VALVE BODY BOLTING B7.70 NDE-5712-CC VT CC06-IV-068 Accept 041 FSK-MP-455,- 2/24/2006 1002 456 Comments: No Recordable Indications Noted 137250 1-CV-518 ON 2-CV- VALVE BODY BOLTING B7.70 NDE-5712-CC VT CC06-IV-063 Accept 041 FSK-MP-401 2/24/2006 1004 Comments: No Recordable Indications Noted 137300 1-CV-519 ON 2-CV- VALVE BODY BOLTING B7.70 NDE-5712-CC VT CC06-IV-059 Accept 041 FSK-MP-492 2/24/2006 1005 Comments: No Recordable Indications Noted 137350 1-ERV402 ON 2.5- VALVE BODY BOLTING B7.70 NDE-5712-CC VT CC06-IV-041 Accept 064 91098SH0002 2/22/2006 SR-1003 Comments: No Recordable Indications Noted 137360 PILOT VALVE FOR VALVE BODY BOLTING B7.70 NDE-5712-CC VT CC06-IV-039 Accept 064 91098SH0002 2/22/2006 I-ERV402 Comments: No Recordable Indications Noted 137400 1-ERV404 ON 2.5- VALVE BODY BOLTING B7.70 NDE-5712-CC VT CC06-IV-032 Accept 064 91098SH0001 2/22/2006 SR-1004 Comments: No Recordable Indications Noted

Page 6 of 20 Attach Inservice Ins; Interval 3, Pei

1. Owner: Constellation Energy, 750 East Pratt Street, Baltimore 4. Owner Certificate of Authorization (If Req.): NIA
2. Plant: Calvert Cliffs Nuclear Power Plant, 1650 Calvert Cliffs F 5. Commercial Service Date: 0510811975
3. Plant Unit: 1 6. National Board Number for Unit: 20911 Summary No. Comp. ID Comp. Desc. Item Procedure MethodlReport/Results System DwglISO Exam Date 137450 1-SI-215 ON 12-SI- VALVE BODY BOLTING B7.70 NDE-5712-CC VT CC06-IV-055 Accept 052 91100 2/24/2006 1009 Comments: No Recordable Indications Noted 137500 1-SI-225 ON 12-SI- VALVE BODY BOLTING B7.70 NDE-5712-CC VT CC06-IV-056 Accept 052 91100SH0002 2/24/2006 1010 Comments: No Recordable Indications Noted 137550 1-SI-245 ON 12-SI- VALVE BODY BOLTING B7.70 NDE-5712-CC VT CC06-IV-080 Accept 052 91100SHOO04 3/4/2006 1012 Comments: No Recordable Indications Noted 137600 1-SI-235 ON 12-SI- VALVE BODY BOLTING B7.70 NDE-5712-CC VT CC06-IV-058 Accept 052 91100SH0003 2/24/2006 1011 Comments: Grind marks on bolt are non structural and not relevant 137650 1-SI-217 ON 12-SI- VALVE BODY BOLTING B7.70 NDE-5712-CC VT CC06-IV-067 Accept 052 91100 2/25/2006 1009 Comments: The residue identified was insulation dust. Thread engagements Sat per Bechtel DMLS # DE04901 137700 1-SI-227 ON 12-SI- VALVE BODY BOLTING B7.70 NDE-5712-CC VT CC06-IV-101 Accept 052 91100SH0002 3/2/2006 1010 Comments: No Recordable Indications Noted 137750 1-SI-247 ON 12-SI- VALVE BODY BOLTING B7.70 NDE-5712-CC VT CC06-IV-081 Accept 052 91100SH0004 2/27/2006 1012 Comments: No Recordable Indications Noted 137800 1-SI-237 ON 12-SI- VALVE BODY BOLTING B7.70 NDE-5712-CC VT CC06-IV-082 Accept 052 91100SHOO03 2/27/2006 1011 Comments: No Recordable Indications Noted

Page 7 of 20 Attachment I II service Inspection Report In1terval 3, Period 2, IRFO17

1. Owner: Constellation Energy, 750 East Pratt Street, Baltimore 4. Owner Certificate of Authorization (If Req.): NIA
2. Plant: Calvert Cliffs Nuclear Power Plant, 1650 Calvert Cliffs F 5. Commercial Service Date: 0510811975
3. Plant Unit: I 6. National Board Number for Unit: 20911 Summary No. Comp. ID Comp. Desc. Item Procedure MethodlReport/Results System Dwg/ISO Exam Date 137850 1-MOV-651 ON 14- VALVE BODY BOLTING B7.70 NDE-5712-CC VT CC06-IV-003 Accept 052 91101,91146 111712006 SC-1004 Comments: No Recordable Indications Noted 137900 1-MOV-652 ON 12- VALVE BODY BOLTING B7.70 NDE-5 712-CC VT CC06-IV-065 Accept 052 91101, 91146 2/24/2006 SC-1 004 Comments: No Recordable Indications Noted powder found was determined tc be insulation residue.

137950 1-SI-118 ON 6-SI- VALVE BODY BOLTING B7.70 NDE-5712-CC VT CC06-IV-094 EngDisp 052 91100 3/4/2006 1001 Comments: Valve was worked under MO 1200600960 and no leakage evident.

138000 1-S1-128 ON 6-SI- VALVE BODY BOLTING B7.70 NDE-5712-CC VT CC06-IV-086 Accept 052 91100SH0002 3/4/2006 1002 Comments: No Recordable Indications Noted 138050 1-SI-138 ON 6-SI- VALVE BODY BOLTING B7.70 NDE-5712-CC VT CC06-IV-083 EngDisp 052 91100SHOO03 3/4/2006 1003 Comments: Valve was worked under MO1 200600959 and verified not to be leaking on startup.

138100 1-SI-148 ON 6-SI- VALVE BODY BOLTING B7.70 NDE-5712-CC VT CC06-IV-095 Accept 052 91100SHOO04 3/4/2006 1004 Comments: No Recordable Indications Noted 138610 2.5-SR-1003- 5FB INLET FLANGE BOLTING ERV-402 B7.50 NDE-5712-CC VT CC06-IV-040 Accept 064 91098SH0002 2/22/2006 Comments: None 138620 2.5-SR-1004 - 5FB INLET FLANGE BOLTING ERV-404 B7.50 NDE-5712-CC VT CC06-IV-042 Accept 064 91098SH0001 2/22/2006 Comments: No Recordable Indications Noted 138630 2.5-SR-1007- 2FB INLET FLANGE BOLTING RV-200 B7.50 NDE-5712-CC VT CCO6-IV-031 Accept 064 91098SH0002 2122/2006

Page 8 of 20 Attachment I Inservice Inspection Report Interval 3, Period 2, IRFO17

1. Owner: Constellation Energy, 750 East Pratt Street, Baltimore 4. Owner Certificate of Authorization (If Req.): NIA
2. Plant: Calvert Cliffs Nuclear Power Plant, 1650 Calvert Cliffs F 5. Commercial Service Date: 0510811975
3. Plant Unit: I 6. National Board Number for Unit: 20911 Summary No. Comp. ID Comp. Desc. Item Procedure Method/Report/Results System Dwg/ISO Exam Date Comments: None 138640 2.5-SR-1008- 2FB INLET FLANGE BOLTING RV-201 B7.50 NDE-5712-CC VT CC06-IV-030 Accept 064 91098SH0001 2/22/2006 Comments: None Class 1 Category B-K 006955 12-W8 PRIMARY HEAD TO SUPPORT BASE B130.10 NDE-5110-CC MT CC06-1M-001 Accept 064 2/2312006 Comments: NO RECORDABLE INDICATIONS NOTED 123650 4-SR-1006 - R-2 INTEGRAL ATTACHMENT B10.20 NDE-5210-CC PT CC06-IP-010 Accept 064 91098SH0001 2/2812006 Comments: No Recordable Indications Noted 123900 2.5-SR-1003- R-12 INTEGRAL ATTACHMENT B10.20 NDE-5210-CC PT CC06-IP-008 Accept 064 91098SH0002 2/22/2006 Comments: No Recordable Indications Noted Class 1 Category B-L-2 134000 PUMP CASING PUMP CASING INTERNAL SURFACE B12.20 NDE-5713-CC VT CC06-IV-173 Accept 064 3112/2006 INTERNAL RCP-11B SURFACE Comments: No Recordable Indications Noted Class i Category B-P 004460 120 HEATER HEATER PENETRATIONS B15.20 NDE-5710-CC VT CC06-IV-093 Accept 064 2/2812006 PENETRATIONS Class I Category F-A 600100 SUPPORT SKIRT COMPONENT SUPPORT F1.40A NDE-5711-CC VT CC06-IV-049 Accept 064-C 2123/2006 Comments: Minor peeling/cracking of paint.

Page 9 of 20 Attachment 1 Inservice Inspection Report Interval 3, Period 2, IRFO17

1. Owner: Constellation Energy, 750 East Pratt Street, Baltimore
2. Plant: Calvert Cliffs Nuclear Power Plant, 1650 Calvert Cliffs F
4. Owner Certificate of Authorization (If Req.): NIA
5. Commercial Service Date: 0510811975
3. Plant Unit: I 6. National Board Number for Unit: 20911 Summary No. Comp. ID Comp. Desc. Item Procedure Metthod/Report/Results 604600 System Dwg/ISO Exam Date 4-SR-1006 - R-2 COMPONENT SLUPPORT-SURBE R:1 tfrl M -4,I I*'ij. J J'* VI CC06-IV-306 Accept 064 91098SH0001 312412006 NDE-5711-CC VT CC06-IV-092 EngDisp 064 91098SH0001 2/27/2006 604750 2.5-SR-1003- R-12 COMPONENT SUPPORT-SNUBBER NDE-5711-CC VT CC06-IV-043 Accept F1.100 064 91098SH0002 2/22/2006 Comments: No recordable indications noted.

604900 2.5-SR-1004 - H-3 COMPONENT SUPPORT Fl.10A NDE-5711-CC VT CC06-IV-044 Accept 064 91098SH0001 2/22/2006 Comments: No recordable indications noted.

Class 1 Category R-A 100805 SG W5 HL NOZZLE EXTENSION TO PRIMARY R1.20 NDE-5411-CC UT CC06-IU-041 Accept 064 12024-0004, - 2/24/2006 HEAD Coverage limited due to configuration. No Recordable Indications Noted. Consider for Relief 0005, -0014 Comments:

102300 30-RC-1 1A - 7 ELBOW TO SAFE END R1.20 NDE-5710-CC VT CC06-1V-075 Accept 064 12034-0004,- 2/25/2006 THIS EXAM WAS DONE TO MEET THE BMV REQUIREMENT OF EPRI MRP 2004-05. 0006,-0008 Comments:

102450 30-RC-1 1A - 10 SAFE END TO PIPE R1.20 NDE-5710-CC VT CC06-IV-116 Accept 064 12034-0004, - 2/22/2006 0006,-0008 Comments: No recordable indications noted.

104550 30-RC-1B -7 ELBOW TO SAFE END R1.20 PDI-UT-10 UT PDI-10-021 Accept 064 12034-0004, - 3/2/2006 0008 WDI-STD-1 19A UT AUT-01 Accept 064 12034-0004,- 3/4/2006 0008 Comments: Coverage limited due to weld configuration will consider for relief request.

104700 30-RC-11B - 10 SAFE END TO PIPE R1.20 NDE-5710-CC VT CCO6-IV-036 Accept 064 12034-0004,- 2/20/2006 Comments: 0008 No recordable indications noted.

106055 SG W5 NOZZLE EXTENSION TO PRIMARY R1.20 NDE-5419-CC UT CC06-IU-046 Accept 064 12034-0004,- 2/24/2006 HEAD 0005 Comments: Coverage limited due to configuration. No Recordable Indications Noted. Consider for Relief

Page 10 of 20 Attachment I Inservice Inspection Report Interval 3, Period 2, IRFO17

1. Owner: Constellation Energy, 750 East Pratt Street, Baltimore 4. Owner Certificate of Authorization (If Req.): NIA
2. Plant: Calvert Cliffs Nuclear Power Plant, 1650 Calvert Cliffs F 5. Commercial Service Date: 0510811975
3. Plant Unit: I 6. National Board Number for Unit: 20911 Summary No. Comp. ID Comp. Desc. Item Procedure M4ethodlRep( ort/Results System Dwg/ISO Exam Date 107450 30-RC-12A - 7 ELBOW TO SAFE END R1.20 NDE-5710-CC VT CC06-IV-0l 64 Accept 064 12034-0004,- 2/24/2006 0008 Comments: No recordable indications noted.

107600 30-RC-12A - 10 SAFE END TO PIPE R1.20 WDI-STD-119A UT AUT-02 Accept 064 12034-0004,- 3/4/2006 0008 PDI-UT-10 UT PDI-10-020 Accept 064 12034-0004,- 31212006 0008 Comments: Coverage limited due to weld configuration will consider for relief request.

109600 30-RC-12B - 7 ELBOW TO SAFE END R1.20 NDE-5710-CC VT CC06-IV-048 Accept 064 12034-0004,- 2/23/2006 0008,-0009 Comments: No recordable indications noted.

109750 30-RC-12B - 10 SAFE END TO PIPE R1.20 NDE-5710-CC VT CC06-1V-045 Accept 064 12034-0004,- 2/23/2006 0008.-0009 Comments: No recordable indications noted.

109950 10/2-CV-1004 2-IN. BRANCH CONNECTION Ri.11 NDE-5412-CC UT CC06-IU-048 Accept 064 12034-0004,- 2/2612006 0008,-0009 Comments: No recordable indications noted. This exam will be evaluated for relief request due to limited coverage.

110450 12-PSL - 1 NOZZLE TO SAFE END R1.11 PDI-UT-10 UT PDI-10-005 Accept 064 60798,12024- 2/2312006 0009 PDI-UT-1 0 UT PDI-10-010 Accept 064 60798,12024- 2/27/2006 0009 Comments: No recordable indications noted. UT was performed both PRE and POST MSIP application.

110500 12-PSL - 2 SAFE END TO PIPE R1.11 NDE-5418-CC UT CC06-IU-064 Accept 064 60798,12024- 2/28/2006 0009 Comments: This exam was done as part of the scope expansion for LTP111100. No recordable indications noted.

110800 12-PSL - 7 PIPE TO ELBOW R1.11 NDE-5418-CC UT CC06-IU-077 Accept 064 60798, 12024- 3/2/2006 0009 Comments: ID geometry indications 360 degrees intermittently. This exam was done as part of the sample expansion because of the indications found on LTP#111100.

110950 12-PSL- 10 ELBOW TO PIPE R1.11 NDE-5418-CC UT CC06-IU-073 Accept 064 60798, 12024- 3/1/2006 0009 Comments: ID geometry indications seen 360 degrees intemittently. This exam was done as part of the sample expansion due to the indications found on LTP#1 11100.

Page 11 of 20 Attachment I Inservice Inspection Report Interval 3, Period 2, 1RFO17

1. Owner: Constellation Energy, 750 East Pratt Street, Baltimore
4. Owner Certificate of Authorization (If Req.): N/A
2. Plant: Calvert Cliffs Nuclear Power Plant, 1650 Calvert Cliffs F
5. Commercial Service Date: 0510811975
3. Plant Unit: 1
6. National Board Number for Unit: 20911 Summary No. Comp. ID Comp. Desc. Item Procedure Method/ReportlResults System Dwg/ISO Exam Date 111050 12-PSL - 12 ELBOW TO SAFE END R1.11 NDE-5412-CC UT CC06-IU-072 Accept 064 60798, 12024- 311/2006 Comments: 0009 ID geometry indications noted intermittently 360 degrees.

111100 12-PSL-13 NOZZLE TO SAFE END R1.11 PDI-UT-10 UT PDI-10-002 EngDisp 064 60798, 12024- 2/23/2006 0009 PDI-UT-10 UT PD1-10-016 Accept 064 60798. 12024- 3/1/2006 Comments: Flaw meeting the acceptance requirements of IWB-3600 evaluation found during PRE MSIP 0009 UT. See CEG letter dated 5/31/2006 which forwarded evaluation to NRC. Four (4) additional welds were examined. UT was performed both PRE and POST MSIP application.

113150 12-SC-1004- 1 NOZZLETO SAFE END R1.20 PDI-UT-10 UT PDI-10-011 Accept 052 91101, 91146 2/2512006 PDI-UT-10 UT PDI-10-001 Accept 052 91101, 91146 2/21/2006 Comments: No recordable indications noted. UT was performed both PRE and POST MSIP application.

113200 12-SC-1004 -2 SAFE END TO ELBOW R1.20 NDE-5210-CC PT CC06-IP-009 Accept 052 91101, 91146 2/26/2006 NDE-5418-CC UT CC06-IU-027 Accept 052 91101,91146 2/21/2006 NDE-5412-CC UT CC06-IU-026 Accept 052 91101.91146 2/21/2006 Comments: Examination was performed to investigate a flaw on the construction radiograph. No recordable indications were noted.

114350 12-SI-1009 - 16 SAFE END TO NOZZLE R1.20 PDI-UT-10 UT PD1-10-014 Accept 052 91100 2/28/2006 Comments: No recordable indications noted.

114900 12-SI-1010 - 7 PIPE TO VALVE 1-SI-227 R1.16 NDE-5412-CC UT CC06-IU-080 Accept 052 91100SH0002 3/2/2006 Comments: No Recordable Indications Noted. Consider for Relief 115200 12-SI-lOJ1 - 14 NOZZLE TO SAFE END R1.20 NDE-5710-CC VT CC06-IV-035 Accept 052 91100SH0002 2/22/2006 Comments: No recordable indications noted.

116750 12-SI-1012 - 13 NOZZLE TO SAFE END R1.20 NDE-5710-CC VT CC06-IV-047 Accept 052 91100SH0004 2/23/2006 Comments: No recordable indications noted.

117900 4-PS-1003M - 1 REDUCER TO ELBOW R1.11 NDE-5412-CC UT CCO-IU-070 Accept 064 91099SH0002 2/27/2006 Comments: No Recordable Indications Noted

Page 12 of 20 Attachment I Inservice Inspection Report Interval 3, Period 2, IRFO17

1. Owner: Constellation Energy, 750 East Pratt Street, Baltimore 4. Owner Certificate of Authorization (If Req.): NIA
2. Plant: Calvert Cliffs Nuclear Power Plant, 1650 Calvert Cliffs F 5. Commercial Service Date: 0510811975
3. Plant Unit: 1 6. National Board Number for Unit: 20911 Summary No. Comp. ID Comp. Desc. Item Procedure Method/Report/Results System DwgIISO Exam Date 118150 4-PS-1003M - 6 ELBOW TO PIPE R11.11 NDE-5412-CC UT CC06-IU-079 Accept 064 91099SH0002 31112006 Comments: No Recordable Indications Noted 118500 4-PS-1003 - 6 NOZZLE TO SAFE END R1.11 PDI-UT-10 UT PDI-10-009 Accept 064 91099SH0002 2/24/2006 PDI-UT-10 UT PDI-10-017 Accept 064 91099SH0002 311/2006 Comments: Will consider for relief request. No recordable indications noted. UT performed both PRE and POST MSIP application.

118550 3-PS-1001 - 1 NOZZLE TO SAFE END R1.20 NDE-5710-CC VT CC06-IV-046 Accept 064 91099SHOO01, 2/23/2006 SH0002 Comments: No recordable indications noted.

120250 3-PS-1001M-29 PIPE TO ELBOW R1.1 1 NDE-5412-CC UT CC06-IU-071 Accept 064 91099SH0001, 2/27/2006 SH0002 Comments: No Recordable Indications Noted 120350 3-PS-1 002 - 1 NOZZLE TO SAFE END R1.20 NDE-5710-CC VT CC06-1V-037 Accept 064 91099SH0002 2/20/2006 Comments: No recordable indications noted.

122250 3-PS-1002M -32 PIPE TO TEE R1.11 NDE-5412-CC UT CC06-IU-049 Accept 064 91099SH0002 2/25/2006 Comments: No Recordable Indications Noted. Consider for Relief 122400 4-SR-001 - 3 ELBOW TO ELBOW R1.11 NDE-5412-CC UT CC06-IU-044 Accept 064 91098SH0002 2/24/2006 Comments: No Recordable Indications Noted 123000 4-SR-1002 - 7 PIPE TO ELBOW R1.1 1 NDE-5412-CC UT CC06-IU-036 Accept 064 91098SHOO01 2/23/2006 Comments: No Recordable Indications Noted 123055 4-SR-1002 - 8 ELBOW TO REDUCER Ri.11 NDE-5412-CC UT CC06-IU-037 Accept 064 91098SH0001 2/23/2006 Comments: No Recordable Indications Noted 123100 4-SR-1005 -1 NOZZLE TO SAFE END R1.20 PDI-UT-10 UT PDI-10-018 Accept 064 91098SH0002 3/2/2006 PDI-UT-10 UT PDI-10-006 Accept 064 91098SH0002 2/25/2006

Page 13 of 20 Attachment I Inservice Inspection Report Inlterval 3, Period 2, 1RFO17

1. Owner: Constellation Energy, 750 East Pratt Street, Baltimore 4. Owner Certificate of Authorization (If Req.): NIA
2. Plant: Calvert Cliffs Nuclear Power Plant, 1650 Calvert Cliffs F 5. Commercial Service Date: 0510811975
3. Plant Unit: I 6. National Board Number for Unit: 20911 Summary No. Comp. ID Comp. Desc. Item Procedure Method/Report/Results System Dwg/ISO Exam Date Comments: UT performed PRE and POST MSIP Application. No Recordable Indications Noted.

123450 4-SR-1006 - 1 NOZZLE TO SAFE END R1.20 PDI-UT-10 UT PDI-10-004 EngDisp 064 91098SH0001 2/23/2006 PDI-UT-10 UT PDI-10-019 EngDisp 064 91098SH0001 311/2006 Comments: One indication which was acceptable in accordance with IWB-350(0 was found. UT was performed both PRE and POST MSIP application.

123700 4-SR-1006 - 4 PIPE TO TEE R1.20 NDE-5412-CC UT CC06-IU-043 Accept 064 91098SH0001 2/2412006 Comments: No Recordable Indications Noted. Consider for Relief 124025 2.5-SR-1003-4A ELBOW TO PIPE R1.11 NDE-5412-CC UT CC06-IU-042 Accept 064 91098SH0002 2/2512006 Comments: No Recordable Indications Noted. Consider for Relief 124350 2.5-SR-1 004 - 4 ELBOW TO PIPE R1.11 NDE-5412-CC UT CC06-IU-035 Accept 064 91098SH0001 2/23/2006 Comments: Single sided exam. No Recordable Indications Noted. Consider fo r Relief 125050 2-LD-1004 - 1 NOZZLE TO SAFE END R1.20 PDI-UT-l0 UT PDI-10-003 Accept 041 FSK-MP-455, 2/22/2006 FSK-MP-456 Comments: Examination performed in accordance with CCNPP Corrective Acttion Program because of flaws found on Unit 2 in 2005. No recordable indications noted.

127850 2-CV-1003 - 42 PIPE TO ELBOW R1.11 NDE-5424-CC UT CC06-IU-081 Accept 041 FSK-MP-490 3/2/2006 Comments: Socket weld volumetric exam. No Recordable Indications Noted.

128850 2-CV-1004 - 18 PIPE TO SAFE END RI.11 NDE-5412-CC UT CC06-IU-050 EngDisp 041 FSK-MP-401 2/26/2006 Comments: No Recordable Indications Noted 128900 2-CV-1004 - 19 NOZZLE TO SAFE END Rl.11 NDE-5710-CC VT CC06-IV-078 Accept 041 FSK-MP-401 2/26/2006 Comments: No recordable indications noted.

130450 2-CV-1005 - 29 NOZZLE TO SAFE END R1.11 PDI-UT-10 UT PD1-10-013 Accept 041 FSK-MP-492 2128/2006 Comments: No recordable indications noted.

131200 2-DR-1003- 1 NOZZLE TO SAFE END DRAIN LINES R1.20 NDE-5710-CC VT CC06-IV-054 Accept 064 FSK-MP-575,- 2/2312006 575H

Page 14 of 20 Attach Inservice Inst Interval 3, Per

1. Owner: Constellation Energy, 750 East Pratt Street, Baltimore 4. Owner Certificate of Authorization (If Req.): NIA
2. Plant: Calvert Cliffs Nuclear Power Plant, 1650 Calvert Cliffs F 5. Commercial Service Date: 0510811975
3. Plant Unit: I 6. National Board Number for Unit: 20911 Summary No. Comp. ID Comp. Desc. Item Procedure Method/Report/Results System Dwg/ISO Exam Date Comments: No Recordable Indications Noted 131500 2-DR-1004 - 1 NOZZLE TO SAFE END DRAIN LINES R1.20 PDI-UT-10 UT PDI-10-012 Accept 064 FSK-MP-1053, .2/27/2006 1053H Comments: No recordable indications noted.

132150 2-DR-1006- 1 NOZZLE TO SAFE END DRAIN LINES R1.20 PDI-UT-10 UT PDI-10-008 Accept 064 FSK-MP-1006, .2/25/2006 1006H Comments: This weld was examined as part of the expanded sample for LTP# 111100 because of similar suceptability to the PWSCC degradation mechanism. No recordable indications noted.

132450 2-DR-1007- 1 NOZZLE TO SAFE END DRAIN LINES R1.20 "PDI-UT-10 UT PD1-10-015 EngDisp 064 FSK-MP-597 2/28/2006 PDI-UT-10 UT PDI-10-007 EngDisp 064 FSK-MP-597 2/2512006 Evaluation See CEG letter dated 5/31/2006 which forwarded IWB-3600 evaluation performed by Westinghouse to the NRC.

Disposition Acceptable:

Comments: This weld was examined law the CCNPP CAP Program because of flaws found in 2005 on Unit 2. A flaw meeting the acceptance criteria of IWB-3600 evaluation was found during PRE MSIP UT. See CEG letter dated 5131/2006 which forwarded evaluation to NRC. UT was performed both PRE and POST MSIP application.

Class 2 Category AUGMT 421900 36-MS-1201 - 2LD LONGITUDINAL SEAM HELB NDE-5411-CC UT CC06-IU-058 Accept 083 60345SH0001 2/26/2006 Comments: No recordable indications noted.

422000 36-MS-1201 - 3LU LONGITUDINAL SEAM HELB NDE-5411-CC UT CC06-IU-059 Accept 083 60345SH0001 2/26/2006 Comments: No recordable indications noted.

422800 36-MS-1202 -2LU LONGITUDINAL SEAM HELB NDE-5411-CC UT CC06-IU-075 Accept 083 60345SH0001 3/2/2006 Comments: No recordable indications noted.

422850 36-MS-1202 - 2 PIPE TO VALVE CV-4048 HELB NDE-5411-CC UT CC06-IU-074 Accept 083 60345SH0001 3/2/2006

Page 15 of 20 Attach Inservice Insl Interval 3, Per

1. Owner: Constellation Energy, 750 East Pratt Street, Baltimore 4. Owner Certificate of Authorization (If Req.): NIA
2. Plant: Calvert Cliffs Nuclear Power Plant, 1650 Calvert Cliffs F 5. Commercial Service Date: 0510811975
3. Plant Unit: 1 6. National Board Number for Unit: 20911 Summary No. Comp. ID Comp. Desc. Item Procedure Method/Report/Results System Dwg/ISO Exam Date Comments: No recordable indications noted.

Class 2 Category C-C 302500 18-S1-1203 - H-1 INTEGRAL ATTACHMENT C3.20 NDE-5210-CC PT CC06-IP-003 Accept 052 91203, 91160. 1/30/2006 91175 Comments: NONE 306050 18-SI-1204 - H-4, R- INTEGRAL ATTACHMENT C3.20 NDE-5210-CC PT CC06-lP-002 Accept 052 91165, 1/25/2006 2 91097SH0013 Comments: No recordable indications noted.

339750 4-SI-1 209 - H-3 INTEGRAL ATTACHMENT C3.20 NDE-5210-CC PT CC06-IP-004 Accept 052 91169 1130/2006 Comments: No recordable indications noted.

339850 4-SI-1 209 - H-1 INTEGRAL ATTACHMENT C3.20 NDE-5210-CC PT CC06-IP-005 Accept 052 91169 216/2006 Comments: No recordable indications noted.

400800 10-CS-1218 - H-5, R- INTEGRAL ATTACHMENT C3.20 NDE-5210-CC PT CC06-lP-007 Accept 061 91097SH0030, 2/1412006 5 SH0001 Comments: No recordable indications noted.

401650 8-CS-1203 - R-1, R-2 INTEGRAL ATTACHMENT C3.20 NDE-5210-CC PT CC06-IP-001 Accept 061 91097SH0005 1/1212006 Comments: No recordable Indications noted.

402850 8-CS-1204 - H-2, R-2 INTEGRAL ATTACHMENT C3.20 NDE-5210-CC PT CC06-IP-011 Accept 061 91097SH0030 3/9/2006 Comments: No recordable indications noted.

409350 8-CS-1206 - H-7 INTEGRAL ATTACHMENT C3.20 NDE-5210-CC PT CC06-IP-006 Accept 061 91097SH0007. 2/10/2006 91173 Comments: No recordable indications noted.

409400 8-CS-1206 - R-5, H-6 INTEGRAL ATTACHMENT C3.20 NDE-5210-CC PT CC06-lP-012 Accept 061 91097SH0007, 3/9/2006 91173 Comments: No recordable indications noted.

Page 16 of 20 Attachment I Inservice Inspection Report Interval 3, Period 2, IRFO17

1. Owner: Constellation Energy, 750 East Pratt Street, Baltimore 4. Owner Certificate of Authorization (If Req.): NIA
2. Plant: Calvert Cliffs Nuclear Power Plant, 1650 Calvert Cliffs F 5. Commercial Service Date: 0510811975
3. Plant Unit: I 6. National Board Number for Unit: 20911 Summary No. Comp. ID Comp. Desc. Item Procedure Method/ReportlResults System Dwg/ISO Exam Date Class 2 Category C-F-2 421450 1/6-RV-3994 6-IN. BRANCH CONNECTION HELB NDE-5411-CC UT CC06-IU-051 Accept 083 60345SH0001 2/25/2006 Comments: NO RECORDABLE INDICATIONS NOTED. WILL CONSIDER FOR RELIEF REQUEST 421500 1/6-RV-3995 6-IN. BRANCH CONNECTION HELB .NDE-5411-CC UT CC06-IU-052 Accept 083 60345SH0001 2125/2006 Comments: NO RECORDABLE INDICATIONS NOTED. WILL CONSIDER FOR RELIEF REQUEST 421550 1/6-RV-3996 6-IN. BRANCH CONNECTION HELB NDE-5411-CC UT CC06-IU-053 Accept 083 60345SH0001 2/25/2006 Comments: NO RECORDABLE INDICATIONS NOTED. WILL CONSIDER FOR RELIEF REQUEST 421600 1/6-RV-3997 6-IN. BRANCH CONNECTION HELB NDE-5411-CC UT CC06-IU-054 Accept 083 60345SH0001 2/24/2006 Comments: No recordable indications noted. Weld will be evaluated for relief submittal.

421750 116-RV-3999 6-IN. BRANCH CONNECTION HELB NDE-5411-CC UT CC06-IU-055 Accept 083 60345SH0001 2/2412006 Comments: NO RECORDABLE INDICATIONS NOTED Will consider for Relief Request.

421800 36-MS-1201 - 2LU LONGITUDINAL SEAM HELB NDE-5411-CC UT CC06-IU-068 Accept 083 60345SH0001 2/28/2006 Comments: No recordable indications noted.

421850 36-MS-1201 -2 PIPE TO PIPE HELB NDE-5411-CC UT CC06-IU-057 Accept 083 60345SH0001 2/26/2006 Comments: No recordable indications noted.

422050 36-MS-1201 - 3 PIPE TO VALVE 1-CV-4043 HELB NDE-5411-CC UT CC06-IU-061 Accept 083 60345SH0001 2/27/2006 Comments: No recordable indications noted.

Class 2 Category F-A 701750 18-SI-1003 - H-1 COMPONENT SUPPORT F1.20A NDE-5711-CC VT CC06-IV-016 EngDisp 052 91203, 91160, 1/30/2006 91175 Comments: One anchor bolt nut found without full thread engagement. ES200600102-000 determined the as found condition was acceptable.

Page 17 of 20 Attachment I Inservice Inspection Report Interval 3, Period 2, 1RFO17

1. Owner: Constellation Energy, 750 East Pratt Street, Baltimore 4. Owner Certificate of Authorization (If Req.): NIA
2. Plant: Calvert Cliffs Nuclear Power Plant, 1650 Calvert Cliffs F 5. Commercial Service Date: 0510811975
3. Plant Unit: I 6. National Board Number for Unit: 20911 Summary No. Comp. ID Comp. Desc. Item Procedure Method/Report/Results System Dwg/ISO Exam Date 702900 18-S1-1004- H-4, R- COMPONENT SUPPORT F1.20B NDE-5711-CC VT CC06-IV-1 15 Accept 052 91165, 3/4/2006 2 91097SH0013 Comments: No recordable indications noted.

712250 4-SI-1209 - H-3 COMPONENT SUPPORT FI.20A NDE-5711-CC VT CC06-IV-015 Accept 052 91169 1/30/2006 Comments: No recordable indications noted.

712350 4-S1-1209 - H-1 COMPONENT SUPPORT F1.20A NDE-5711-CC VT CC06-IV-019 Accept 052 91169 2/6/2006 Comments: ES200600092-000 determined the as found gaps were acceptable as is.

718100 10-CS-1218 - H-5, R- COMPONENT SUPPORT F1.20B NDE-5711-CC VT CC06-IV-025 Accept 061 91097SH0030, 2/1412006 5 SH0001 Comments: Minor chipped coatings noted.

718150 8-CS-1203 - R-1. R-2 COMPONENT SUPPORT F1.20B NDE-5711-CC VT CC06-IV-007 Accept 061 91097SH0005 1/12/2006 Comments: No recordable indications noted.

718650 8-CS-1204 - H-2, R-2 COMPONENT SUPPORT F1.20B NDE-5711-CC VT CC06-IV-113 Accept 061 91097SH0030 3/7/2006 Comments: Cracked paint noted on support.

720700 8-CS-1206 - H-7 COMPONENT SUPPORT F1.20A NDE-5711-CC VT CC06-IV-020 Accept 061 91097SH0007, 2/10/2006 91173 Comments: No recordable indications noted.

720750 8-CS-1206 - R-5. H-6 COMPONENT SUPPORT F1.20A NDE-5711-CC VT CC06-IV-118 Accept 061 91097SH0007, 3/9/2006 91173 Comments: No recordable indications noted.

723250 12-SC-1 215 - H-7 COMPONENT SUPPORT-SPRING F1.20C NDE-5711-CC VT CC06-lV-199 Accept 052 91097SH0002, 311512006 91109SHOO01 Comments: Preservice Examination 726650 6-MS-1 207 - R-13 COMPONENT SUPPORT F1.20A NDE-5711-CC Vr CC06-IV-087 Accept 063 60345SHOO02 2/26/2006

Page 18 of 20 Attachment I Inservice Inspection Report Interval 3, Period 2, IRFO17

1. Owner: Constellation Energy, 750 East Pratt Street, Baltimore 4. Owner Certificate of Authorization (If Req.): NIA
2. Plant: Calvert Cliffs Nuclear Power Plant, 1650 Calvert Cliffs F 5. Commercial Service Date: 0510811975
3. Plant Unit: I 6. National Board Number for Unit: 20911 Summary No. Comp. ID Comp. Desc. Item Procedure Method/Report/Results System Dwg/ISO Exam Date Comments: No recordable indications noted.

727400 16-FW-1219 - H-2 COMPONENT SUPPORT F1.20B NDE-5711-CC VT CC06-IV-079 Accept 045 91093 2/2612006 Comments: No recordable indications noted Class 2 Category R-A 307150 14-SI-1201 - 1 VALVE SI-444 TO ELBOW R1.20 NDE-5412-CC UT CC06-IU-009 Accept 052 91097SH0011. 2/1/2006 SHOO13 Comments: Single sided exam due to valve material. No recordable indications. Consider for relief 310050 12-S1-1214-3 PIPE TO TEE R1.20 NDE-5412-CC UT CC06-IU-005 Accept 052 91097SH0026, 1/30/2006 91168,91109 Comments: Single sided exam. No recordable indications. Consider for relief 310200 12-SI-1214 - 5 PIPE TO TEE R1.20 NDE-5412-CC UT CC06-IU-006 Accept 052 91097SH0026, 1/30/2006 91168,91109 Comments: Single sided exam. No recordable indications noted. Consider for relief 310850 12-SI-1214 - 15 ELBOW TO TEE R1.20 NDE-5412-CC UT CC06-IU-002 Accept 052 91097SH0026, 1/23/2006 91168,91109 Comments: Root geometry indications noted intermittently 360 degrees.

311050 12-SI-1214 - 18 ELBOW TO PIPE R1.11 NDE-5412-CC UT CC06-IU-003 Accept 052 91097SH0026. 1/2512006 91168,91109 Comments: No recordable indications noted.

312700 12-SI-1216 - 7 PIPE TO REDUCER R1.20 NDE-5412-CC UT CC06-IU-004 Accept 052 91097SH0006, 1/30/2006 91110 Comments: No recordable indications noted.

313950 10-SI-1203 - 13 ELBOW TO PIPE R1.20 NDE-5412-CC UT CC06-IU-001 Accept 052 91097SH0014 1113/2006 Comments: No recordable indications noted.

Page 19 of 20 Attachment I Inservice Inspection Report Interval 3, Period 2, 1RFO17

1. Owner: Constellation Energy, 750 East Pratt Street, Baltimore 4. Owner Certificate of Authorization (If Req.): NIA
2. Plant: Calvert Cliffs Nuclear Power Plant, 1650 Calvert Cliffs F 5. Commercial Service Date: 0510811975
3. Plant Unit: I 6. National Board Number for Unit: 20911 Summary No. Comp. ID Comp. Desc. Item Procedure Method/Report/Results System Dwg/lSO Exam Date 314700 10-s1-1203 - 22 ELBOW TO PIPE R1.20 NDE-5412-CC UT CC06-IU-008 Accept 052 91097SH0014 2/7/2006 Comments: No recordable indications noted.

320150 6-S1-1201 - 9 ELBOW TO PIPE R1.20 NE)E-5412-CC UT CC06-IU-007 Accept 052 91097SH0017, 2/2/2006 91126 Comments: No recordable indications noted..

340650 4-SI-1210 - 2 PIPE TO ELBOW R1.20 Nr)E-5412-CC UT CC06-IU-010 Accept 052 91169, 91153 218/2006 Comments: No recordable indications noted.

400400 10-CS-1202 - 8 PIPE TO ELBOW R1.20 NI)E-5412-CC UT CC06-IU-011 Accept 061 91097SH0030 21912006 Comments: No recordable indications noted.'

400450 10-CS-1 202 - 9 ELBOW TO PIPE R1.20 NIDE-5412-CC UT CC06-IU-012 Accept 061 91097SH0030 2/9/2006 Comments: No recordable indications noted.

400850 10-CS-1218 - 2 PIPE TO ELBOW R1.20 N!DE-5412-CC UT CC06-IU-013 Accept 061 91097SH0030, 2/1412006 SH0001 Comments: No recordable indications noted.

91097SH0030, 2/16/2006 401200 10-CS-1218 - 9 PIPE TO TEE R1.20 NDE-5412-CC UT CC06-IU-015 Accept 061 SH0001 Comments: Coverage limited due to configuration. No recordable indications. Consider for relief 402950 8-CS-1204 - 12 PIPE TO ELBOW R1.20 NDE-5412-CC UT CC06-IU-082 Accept 061 91097SH0030 3/8/2006 Comments: No recordable indications noted.

410650 8-CS-1206 - 52 PIPE TO PIPE R1.20 N!DE-5412-CC UT CC06-IU-078 Accept 061 91162, 91095, 3/2/2006 91173 Comments: No recordable indications noted.

415700 12-SC-1208 - 10 PIPE TO ELBOW R1.20 NIDE-5412-CC UT CC06-IU-083 Accept 052 91097SH0002, 3/8/2006 SHOO06 Comments: No recordable indications noted.

421730 36-MS-1201 - 3 PIPE TO PIPE R1.20 NDE-5411-CC UT CC06-IU-056 Accept 083 60345SHOOOI 2/25/2006

Page 20 of 20 Attachment I Inservice Inspection Report Interval 3, Period 2, IRFO17

1. Owner: Constellation Energy, 750 East Pratt Street, Baltimore 4. Owner Certificate of Authorization (If Req.): NIA
2. Plant: Calvert Cliffs Nuclear Power Plant, 1650 Calvert Cliffs F 5. Commercial Service Date: 0510811975
3. Plant Unit: I 6. National Board Number for Unit: 20911 Summary No. Comp. ID Comp. Desc. Item Procedure Method/Report/Results System Dwg/ISO Exam Date Comments: No recordabte indications noted.

421770 36-MS-1201 - 2 ELBOW TO PIPE R1.20 NDE-5411-CC UT CC06-IU-045 Accept 083 60345SH0001 2/24/2006 Comments: No recordable indications noted.

421780 36-MS-1 201 -3 PIPE TO PIPE R1.20 NDE-5411-CC UT CC06-IU-047 Accept 083 60345SH0001 2/24/2006

ENCLOSURE (2)

CALVERT CLIFFS NUCLEAR POWER PLANT, INSERVICE INSPECTION

SUMMARY

REPORT FOR CALVERT CLIFFS UNIT 1 ASME BOILER & PRESSURE VESSEL CODE SECTION XI, FORM NIS-2 Calvert Cliffs Nuclear Power Plant, Inc.

July 10, 2006

2006-1 Class I and 2 NIS-2's Completed 1199701648 97-1-043 I#DBI-1019 Two 1200203664 2001-1-050 1PUMPRC12B(s) One 1200201772 2003-1-021 1MOV637 Two 1200501094 2005-1-013 1PZVRXCSSII One 1200404712 2005-1-014 1PZVRX11 One 1200303644 2005-1-015 1#CC-9, 1"& under One 1200404619 2005-1-023 1HVRC-219 One 1200404623 2005-1-024 1CV100E One 1200404347 2005-1-025 IERV402 One 1200403172 2005-1-026 1CV638 One 1200405334 2005-1-030a 1IHVMS-156 Two 2005-1-030b 1#EB12-1029 Two 1200403674 2005-1-038 I#GCI-1015-H7 Two 1200404733 2005-1-042 1RV469 One 1200303755 2005-1-047 1CKVFW-130 Two 2005-1-050a 1PZVRC11 One 2005-1-050b 1#CC1-1006 One 2005-1-050c 1PZVRC11 One 1200501479 2005-1-050d 1PZVRC11 One 2005-1-050e 1PZVRC1 1 One 2005-1-050f I#CCI-1001 One 2005-1-050g I#CCI-1001 One 1200501480 2005-1-051 I#CC-1, 3/4" (RTD's & PDT's) One 1200404503 2005-1-055 IERV404 One 1200404727 2005-1-056 IRV200 One 1200404410 2005-1-057 1RV201 One 2005-1-067a 1PUMPRC1 IB(s) One 2005-1-067b 1PUMPRC1 1B One 1200404658 2006-1-006 1PZVRXl1 One 2006-1-011a 1HVPA-1044 Two 2006-1-011b 1#HB43-1002 Two SNUB POOL SNUB-0-006 *SNUBBER POOL 1, 2, & 3 EPU Reference No. 200647-22-3624

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner:

Calvert Cliffs Nuclear Power Plant, Inc. Date: 61712006 (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet 1 of 2 (address)

2. Plant: Calvert Cliffs Nuclear Power Plant Unit: One (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&R No. 97-1-043, MWO No. 1199701648 (address) (P.O. no., job no., etc.)
3. Work Performed by: Calvert Cliffs Nuclear Power Plant Dept. Type Code Symbol Stamp: N/A (name) Authorization No.: N/A Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, Md. 20657 Section XI Class: Two (address)
4. Identification of System: System Number ..045 System Name: Feedwater 5.(a) Applicable Construction Code and Class: ASME B31.1.0d, 1967 Edition, 1972 Add (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition
6. Identification of Components Repaired or Replaced and Replacement Components: ASME Repaired, Code Name of Name of Manufacturers National -Other Year -Replaced, O0 Stamped Componet Manufacturer Serial Number Board No. Identification Built Replacemen (Yes orNo) 1975 Repaired/RepI Piping System Bechtel .16'DBI.1019 N/A #12 Steam Generator Feed Water 1975 Repaired/Repl No Supply Piping aced Round Bar Energy Steel & 42186 HtL#: C28153 N/A Bar, Round, 11/4 in., ASTM A- 1999 Replacement No Supply Co. 576. Gr. 1045 Pipe Energy & Process 414601 H.#: A61483 N/A Pipe, 16 in., schedule 80,ASTM A- 2005 Replacement No Corporation 106, Grade C
7. Description of Work:

This plan was for the replacement of a 4 foot section of feedwater piping 16"DB1 -1019 on the downstream side of I CKVFW-130.

8. Tests Conducted: Hydrostatic:.- Pneumatic:_ -Nominal Operating Pressure: lnservice:- Leakage:- Functional:.

Pressure: 977 psi. Test Temperature: 80 Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (I) size is 8-1/2 in. x 11 in., (2) information in Items 1 through 6 on this report is included on each sheet, and (3) each shect is numbered and the number of sheets is recorded at the top of this form.

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

A Section XI Ultrasonic Examination of the affected component was Derformed to satisfy Section XI Pre-Service NDE Reauirements. Code Case N-416-2 was invoked to satisfy Section XI reauired nressure tests. Addtional Section III Examinations were performed (as aDplicable) to satisfy Code Case N-416-2 and Req.Guide 1.147.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this RepalrlReplacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp: _N.I.A_

Certificate of Authorization No.: N/A Expiration Date: N/A Charles H. Ballard Signed: Date: 6/7/2006 Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by ABS Consulting of Houston, Tx. have inspected the components described in this Owner's Report during the period .' - 4, - e 6 . to 5-- ?- o 6 , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

Q-Soz--e 44" Commissions: /,7"/rAwzL :iý09o,,QO t*e)3o Al -r Inspector's Signature National Board, State, and Endorsements Date: &,-- /: - 2004

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XA Calvert Cliffs Nuclear Power Plant, Inc. Date: 6/912006

1. Owner:

(name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet I of 2 (address)

2. Plant: Calvert Cliffs Nuclear Power Plant Unit: One (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&F No. 2001-1-050, MWO No. 12002M;64 (address) (P.O. no.. job no., etc.)

I. INfPA

3. Work Performed by: Calvert Cliffs Nuclear Power Plant Dept. Iyp¢ *uue oymU1 taLI (name) Authorization No.: N/A Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class: One (address)
4. Identification of System: System Number 064. System Name: Reactor Coolant System__

5.(a) Applicable Construction Code and Class: ASME B&PV Code Sect. I11, 1983 Edition, Sum. 1983 Add; Cliý-.s I (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition

6. Identification of Components Repaired or Replaced and Replacement Components: -ASME Repaired, - Code Name of Name of Manufacturers National Other Year Replaced, o: Stamped Componet Manufacturer Serial Number Board No. Identification Built Replacemen (Ye:: orNo) 198 eaie/Rp RCP Seal Sulzer Bingham SN" 1C873 NB 1240 #12B Reactor Coolant Pump. 1988 Repaired/Repl Yes Inc. Mechanical Seal. aced Seal BGE CCNPP Shops 1200301717 SN: NB 1236 Seal, Cartridge Assembly (RCP) 2003 Replacement Yes 1C864 875B-3V Complete Sulzer Bingham per FCR 87-0074
7. Description of Work:

This plan was for the replacement of the mechanical seal on #12B Reactor Coolant Pump.

8. Tests Conducted: Hydrostatic:,-- Pneumatic:_._ Nominal Operating Pressure: Inservice: Leakage: 17 Functional:

Pressure: 2260 psi. Test Temperature: 533 Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x II in., (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of shects is recorded at the top of this form.

-Sheet 2-of-2*

FORM NIS-2 (Back)

9. Remarks:

A Section XI System Leakaqe Test of the affected component was performed durinq the system conditions listed in section 8. of this report.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repair/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A Signed: Charles -Ii.

Engineering Ballard Technician Date: 6/9/2006 Sinerd orte 6/9/2006eTite Certificate of Inservice Inspection 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by ABS Consulting of Houston, Tx. have inspected the components described in this Owner's Report during the period 7- 4 to t --.--- 0 , , and state to the best of my

<7 knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

J

_n___tor__natureCommissions: VA t1oVal oardSa6a '

4, r3s0 /s Insnector's Sig~natu~re National Board. State, and Endorsements Date:. -/I -20j,

- FORM NIS-2 OWNER'S REPORT FOR REPAIR REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section Xl

1. Owner: Calvert Cliffs Nuclear Power Plant, Inc. Date: 6/1/2006 (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet I of 2 (address)
2. Plant: Calvert Cliffs Nuclear Power Plant Unit: One (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&F No. 2003-1-021, MWO No. 1200201772 (address) (P.O. no.,job no., etc.)

Type Code Symbol Stamp: N/A

3. Work Performed by: Calvert Cliffs Nuclear Power Plant Dept.

(name) Authorization No.: N/A Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class: Two (address)

4. Identification of System: System Number 052 System Name: Safety Inection 5.(a) Applicable Construction Code and Class: ASME B31.1.0, 1967 Edition, CCases N-2, N-10 (b)Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition
6. Identification of Components Repaired or Replaced and Replacement Components: ASME Repaired, Code Name of Name of Manufacturers National Other Year Replaced, oi Stamped Componet Manufacturer Serial Number Board No. Identification Built Replacemen (Yes or No)

Valve Velan Engineering I-MO V-637 N/A 12A Aux. High Pressure Safety 1977 Repaired/Repi No Co. Injection Loop Motor Operated aced Isolation Valve Disc Velan Engineering 77419-GX SN: 527-3 N/A Valve Disc, 2 in., 1500 lb., 1992 Replacement No Co. AMS5387 (Stellite #6) or ASTM A-182 Gr. F316, Stellite #6 Hard Facing

7. Description of Work:

This plan was for the parts needed to rebuild 1-MOV-637, 12A Aux. High Pressure Safety Injection Loop Motor Operated Isolation Valve.

8. Tests Conducted: Hydrostatic:7- Pneumatic.' Nominal Operating Pressure: Inservice: E Leakage:rF- Functional:El Pressure: N/A psi. Test Temperature: N/A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in., (2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

No Section XI Pre-Service NDE was performed in support of this activity.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this RecpairlReplacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A Charles H. Ballard Signed: Engineering Technician Date: 6/1/2006 "Owner or OMvnefs Designee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by ABS Consulting of Houston, Tx. have inspected the components described in this Owner's Report during the period .3- ./-- o , to S- ,7 .3- 0' . and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

Commissions: ~If 7/eJ/,

rkIVq

-- "'I,"

?~1)4

- t 6 AqR/ p 0

'-e I Inspector's Signature National Board, State, and Endorsements Date: - - 20_..

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI I. Owner: Calvert Cliffs Nuclear Power Plant, Inc. Date: 6/9/2006 (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet I of 0 (address)

2. Plant: Calvert Cliffs Nuclear Power Plant Unit: One (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&R No. 2005-1-013, MWO No. 1200501094 (address) (P.O. no.. job no., etc.)

Calvert Cliffs Nuclear Power Plant Type Code Symbol Stamp: N/A Work Performed by: ) Authorization No.: N/A Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class: One (address)

4. Identification of System: System Number .064 System Name: Reactor CoolantSystem S.(a) Applicable Construction Code and Class: Combustion Engineering Spec 8067-486-400 Reactor Vessel

_inte rn-als .........

(b) Applicable Sect Xl Ed. for Repairs/Replacement. 1998 Edition

6. Identification of Components Repaired or Replaced and Replacement Components: ASME Repaired, Code Name of Name of Manufacturers National Other Year Replaced, oi Stamped Componet Manufacturer Serial Number Board No. Identification Built Replacemen (Yes or No)

Vessel Internals Combustion Core Support NIA Unit #1 Reactor Vessel Core 1971 Repaired/Repl No Engineering Structure Support Structures aced 6 Hole ICI CE Nuclear Power 400061 SN: 07 thru N/A Stalk Ass., 6 Hole. QuickLoc ICI 2000 Replacement No Stalk Assy. LLC 12 Mlod. West/CE PtN 165-001.01.

per BGEDRWG 12147-0004SH0001A 6 Hole HJTC CE Nuclear Power 411350 SN: 01 & 02 N/A Stalk Ass., HJTC, 6 Hole, 2005 Replacement No Stalk Assy. LLC QuickLoc ICI Mod. West/CE P/N 165-006-01, per BGEDRWG 12147-0049SH0001,2,3

7. Description of Work:

This plan was for the Electrical Discharge Machining (EDM) work on the Upper Guide Structure Support Plate and Fuel Alignment Plate and for the underwater.welding of the HJTC tube holders to the Control Element Assembly Shroud and the funnel to the Upper Guide Structure Support Plate. All of the original items mentioned above are considered parts of the Core Support and are controlled by Section Xl. This plan also covers the QuickLoc Stalk Assembly pressure retaining parts added to the ICI stalks.

8. Tests Conducted: Hydrostatic: - Pneumatic: Nominal Operating Pressure: [nservice:-. Leakage:- Functional:

Pressure: N/A psi. Test Temperature: N/A De2. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x II in., (2) information in Items I through 6 on this report is included on each sheer. and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Sheet,.of 0 FORM NIS-2 (Back)

9. Remarks:

A Section X1 VT-3 Visual Examination of the affected component support was performed prior to the system being returned to service.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this RepalrlReplacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp: ..N/.A Certificate of Authorization No.: N/A Expiration Date: N/A Charles H. Ballard Signed: Engineering Technician Date: 6/9/2006 wn-er orwO-ner's Designee Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by ABS Consulting of Houston, Tx. have inspected the components described in this Owner's Report during the period .- -/0-4, to -06 , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures. described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concernfing the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

6(2 Commissions: , 72?6 ge 13 40 3 0'A) v-Insnectnr's Sionature National Board, State, and Endorsements Date: ,/ - /,57 - 200_16

FORM-IS- WNER'S RE PORT-FOR-REPAI R-/-REP L-ACEMENT-ACTI VI TY As Required by the Provisions of the ASME Code Section Xl I. Owner: Calvert Cliffs Nuclear Power Plant, Inc. Date: 618/2006 (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet I of 2-(address)

2. Plant: Calvert Cliffs Nuclear Power Plant Unit: One (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&R No. 2005-1-014, MWO No. 1200404712 (address) (P.O. no., job no., etc.)

Calvert Cliffs Nuclear Power Plant Type Code Symbol Stamp: N/A

3. Work Performed by:

.. "(name) Authorization No.: N/A Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class: One (address)

4. Identification of System: System Number 064 System Name: Reactor Coolant Syste 5.(a) Applicable Construction Code and Class: ASME B&PV Code Sect. I11,1965 Edition, Win. 1967 Add; Class A C'Ca--s--t32352_133S6_1359- 1 (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition
6. Identification of Components Repaired or Replaced and Replacement Components:

ASME Repaired, Code Name of Name of Manufacturers National Other Year Replaced, oi Stamped Componet Manufacturer Serial Number Board No. Identification Built Replacemen (Yes or No)

Pressure Vessel Combustion Vessel SN: 67107; 20911 Unit #I Reactor Vessel and Head 1971 Repaired/Repl Yes Engineering Head SN:67207 aced Hermavalve Rockwell 40074-GX SN: N/A Valve, Globe, 3/4 In., 1690 lb., 1983 Replacement Yes International Flow 81'336 & BV343 Hermavalve. ASME SA-182, Tp.

Control Division 316, BGEDRWG. #12847-0050&0062, item 3 Nut blackson Inc. 416676 Ht.#: N/A Nut, Heavy Hex, 5/8 in. X I1TPI, 2005 Replacement No 7307732 ASME SA-194, Gr. 2H Nut Mackson Inc. 413582 Ht.#: N/A Nut, Heavy Hex, 518 in. X II TPI, 2004 Replacement No 7307732 ASME SA-194, Gr. 2H Rod Nlackson Inc. 409797 Ht.#: 614117 N/A Rod, Allthread, 5/8 in. X I I TPI, 2003 Replacement No ASME SA-193, Gr. B7 Coupling DuBose National 54906-GX Heat N/A Coupling, 3/4 In., 3000 lb., 1992 Replacement No Energy Services Code: EFX Socket, veld, ASME SA-182, Gr.

Inc. F316 RRVCH Babcock & Wilcox 408300 SN: 104J01 213 Closure, Reactor Vessel Head, 2005 Replacement Yes Canada ASME SA-508, Gr.3, Cf. 1.

CEDM & ICI Nozzles, ASME SB-167 Alloy 690 CED.1 Wcstinghouse 410960 SN: 3282 N/A CEDM Assembly. Upper & 2003 Replacement Yes Assembly Electric Co. LLC thru 3284 Lowser Pressure Housing/Motor Assembly CEDM Westinghouse 410960 SN: 3279 & N/A CEDM Assembly. Upper & 2003 Replacement Yes Assembly Electric Co. LLC 3280 Lower Pressure Housing!Mlotor Assembly CEDM Westinghouse 410960 SN: 3222 N/A CED1 Assembly, Upper & 2003 Replacement Yes Assembly Electric Co. LLC thru 3277 Lower Pressure Housing/Motor Assembly NOTE: Supplemental sheets in form of lists. sketches, or drawings may be used, provided (1) size is 8-1/2 in. x II in., (2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is

Sheet;.of 2.

FORM NIS-2 (Back)

7. Description of Work:

This plan was for the installation of the Replacement Reactor Vessel Closure Head on the Unit #1 Reactor Vessel. It also covers the vent line hanger modification performed under R&R 2006-0-001.

8. Tests Conducted: Hydrostatic:C2 Pneumatic.'. Nominal Operating Pressure: Inservice: L Leakage: 7 Functional:! ..

Pressure: 2260 psi. Test Temperature: 533 Deg. F

9. Remarks:

A Section XI System Leakage Test of the affected component was performed during the system conditions listed in section 8. of this report. A Section XI Surface Examination of the affected component was performed to satisy Section XI Pre-Service Requirements. A Section XI Ultrasonic Examination of the affected component was performed to satisfy Section XI Pre-Service NDE Requirements.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this RepairlReplacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp: N/A Certificate of AuthorizationNo.: N/A Expiration Date: N/A Charles H-.Ballard Signed: _____ Engineering Technician Date: 6820 61812006 Owýnr or O5wer's Designee, Tide Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by ABS Consulting of Houston, Tx. have inspected the components described in this Owner's Report during the period d - /'. e/_6 to .- /, - o *, ,and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

4'I Commissions: 1/,Z473/4,/1u,q.Y_ C -e36 Inspector's .inature National Board, State, and Endorsements Date:_6 - 200 44

FORM NPV-1 N CEPTIRCATE HOLDERS' DATA REPORT FOR NUCLEAR PUMPS OR VALVES' As Required by the Provisions of the ASME Code,Section III, Div. 1 Page 1 of 2

1. Manufactured by Rockwell International, P.O. Box 501, Sulphur Sorinas, TX 754L82 jName and A*dress of N Ca(rtificate HoKder)

, 2. Manufactured for Baltimore Gas & Electric Co.,P.O. Box 1535, Baltimore. ,MD 21203 (Nam*i ano Adornes of PUrtc8"et' o* 0'wite'

3. Loicdon of Installation Cal/ert Cliffs Nuclear Electric, Lusbv, MD .0657 4.. Pump or p- .. .....

lve Valve - Globe Nominal Ii, Si;,s 3/4" n ,,r,,, lz ,, 3/41" (Incnj (inoni (a) Model No.. (b) N Certificate Holder's ic? Canadian Series No. Serial Regisrration Id) Ora~wing 0f) Nat'l. 19) Year at Tvne No.. Nn.

15104T BV326 NA C-31602688-1 I NA 1984 (2) BV3 2 7 ... . ._ ___ _i BV328 (4) BV329 _ _ _ _ L (5) BV330 (6) V33 (7) BV332 I l _

(a) 8Ij (91 N" - BV334  ;.

(1o, 15104T1 BV335 PIA C-31602688-1 I tNA 198r Rockwell International Assembly Lot .Io. H6246-2 Qty. 18 l8ti-ifit* O f itnio.n 1fi41riCWftzr w nicr't t"'t as d a, '.2l 81

.*etal Oiachracm-with Backuo Stem Seal Oesign Report oesigo C~omditaons 2340 psi 800 'F or Valve Pre-sure Class (1) 6.

WPrhslsut 5 (Teamaoiacurej

7. Cold Working Pressure -psi at 100"F.
8. P're-ssure Retaining Pieces Mark No. L Material Soed. No. Manufacturer , Remarks

. a) Castings I i I NA

______ I _______

______ 1~ I I _______

  • 1

________________________________________________ I ____________________________________________________

_______ _________ ________ I _______

_______I _________ I ________ I _______

T I -I (b) Forgings I .I Bodieps SK-4-7#l I SA182GRF316  ! Texas Force I Caroenter Heat

_ __ __ 847737 I I I (1) For manually coerated, valves only.

Stuoiemencai sneits ;n !crm --f fist. Set~e~ S Or -!2Win1gs mavý be usac -ro-'ced 0 1 s~ze ic :3-i: l" I l-, i2nfcrmation in iterns 1, 2 arc -. cr. tmit Data A~ecor: is inciuce-, cn escn snee:. amc ~13 eac,'- snee, is rimrnefed anc murnter of shee~z is reoreoed at !cc ci~' !crrn..

!,1 .01 1 r1 crrm 7h477 0)Z -. f'ev :ae. in i fr:mr V: a Crop- -ZeiM. ASM2. 2-15 -.. - -,r .. Nv.' ?C,%.N. .. Y. ;CL*27

FORM NPV-1 (Sack)

Martc No. Material Spec. No. Manufacturer j rants aol sotting ______________________ _____

Diss-F86#A5 GR1CrcbeHatAI I 5U9 Disks ___ I ____ 55 R ____

1 ____ rc b eRaCAIIt

______F7 04________63 I CrucibleIHeatA14303 Bonetsl Fill6er SFA5.9T316 Coeledyer Mcslay HetLit.

9 4Drauisktst U507# Ai. Di6sRk 1 tot r 4015 Cruciblela pi CERTINCATE OF: COMPUANCE We cer*ify that the statements made in :'izs report are correct and that this purmo. or valve. confofami to mhe ruled of construc.-:ion of tre Sumr ASME197 Code for Nuclear Power PlantN30"-1 Comoonents. Section Ii. Di. e, 1,P41-I., Edirion 1977 Addenda SuiCnder, 1978 . C. case No. N l_ _/_

'Date)

Signed l RTck"lPJCa1Itkc2t0l t 1OI40"Idaicnal rnterr. _1 _y _

Cur ASME Carrificate of Authonzation No. 14"1814 touse tne nsymbol exirev S/12/86 (1) "c ,""

CERTIFICATION OF DCcSIGN Design information on file at Rockwell . t*ntrnational, Sulohur Springs, Texas Stress analysis eporntlc*lss ronlyl an file at Rockwell International, Sulohur Sorings, Texas Design spociicstions certified by (,) Robert F. Ash PE State 1-10 - Peg. No. 9198 Stress analysis certified by (1) Wayne S. briggs PE State TX Reg. No. 4914*5 (11 Signature not re<3uired.lLis. name only.

C-SPIMFICATE OF SHOP INSPECTION I. the undersigned. holding a valid commission issued by the National Board of Sailer and Pressure Vessel Insp*:cors and the State or Province of Tsx 2 andemoloyed by Victorig Lloyds' Ins. Co.

of Houston. ThxaS 77098 have inspected the pump, or valve. described in this Data Aeport on V,- -3 1 Y an- sate tha (t tne best ofmy knowledge anadbelief, the N Cerifiicate Holder has con-struc-ed this ourmo, or valve, in accordance wilt the ASME Ccde, Section Ill.

By' signing this certificate. neither the Insrec:or nor his eficyer makes any warranty. ex:ressed or imclied. ccmerning te e.*ui~ment ,,,scni!et ;,this n Cata .eaor*. nermoee.

-nei.ether !ne Inspoector rcr mis emoplover snail be liable in any manner for any cersonal injurl or ,rco,,ertV dama;e or a less of any kinc arisino fr-n "r oonnectec wit ;,,%s ,nscectain.

cat ) I '-.,  :' . , . ,

16 TP'(vS i/t' sa..-~- Slamsson ari NC

Page 2 of 2 Flow Control Division UtilMty Products Group P. 0. Box 501 Sulohur Sorings. Texas 75482 Rockwell 1214) 885-3151 International

1. Manufactured by Rock-ell international, Sulphur Springs, Texas

.2. Manufactured for Baltimore Gas & Electric Co., P.O. Box 1535, Baltimore, MD 21203

3. Rockwell International Assembly Lot No. H6246-2 Oty. 18 (Brief description of service for which equipment was designed for)

(a) Model No., (b) Manufacturer's (c) Canadian Wd)Drawing (e)Class (f) tat'l. (g)Year Series No. Serial Registration No. Bd. No. Built Or Type No. No.

1 1504TI

5. BV336 NA C-31602688-1 1 NA 1984 12 9V337 I
13. BV338 -.

.14. BV339 .... .... ... _ __ _

1.. V340_____ __

.1. BV341 __,

17.7 ,, BV342 4, 1'. 15104TI BV343 rHA C-316026IS-I 1 NA 1984 20.

21.

22.

23.

24.

25.

FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed One Day's Production Pg. 1 of 3

-- Manufactured and certified by Babcock &Wilcox Canada, 581 Coronation Boulevard, Cambridge, Ontario NI R 5V3 2.Manufactured for Calve rt Cliffs Nuclear Power Plant - Units I &2

3. Locaton flInstallatlon 1 650 Calvert Cliffs Parkway, Lusby, Maryland 20657 4,Type; .104JE001 See List #1 See List #1 -- 2005 (drawing no.) spec, no.)

(MaWl (tenilla Sirength) (CRN) (year built)

5. ASMvECodt, Secion M, Division 1: ' 1995 1996 1 (edlUon) (addenda date) (cla;3) (Code Case no.)

6.Fabricated in accordance with Cost. Spoc. (Div. 2 only) Revislon Date

7. Remarks: JSW N-2 form for head forging Is attached..

B. Nom. Min. design Length overall Thickness (in.) See List #2 thickness (in,) See List #2 Ola. ID (ft & In.) 17'-1" (ft &In.) 8'-0 11/16"

g. When aonlicable. Certificate Holders' Data Reports are attached for each Item of this report. _____________

National National Part or Appurtenance Board No. Part or Appurtenance Board No.

Serial Number In NumerIcal Order Serial Number In Numerical Order (1) 104J-01 o* . 213 (26) _____________ ____________

(2) (27) ___________ __________ _

(3) (28) _____________ _

(4) (29) _____________

(5) (30)

'1) (31) _____________

(32)

(8) (33)

(9) (34) _____________

(10)

(35) ____________ _

(11) (36)

(12) (37)

(13) (38) ______________ _____________

(14) (39) ______________ _____________

(15) (40) ______________ _____________

(16) (41) _____________ ____________

(17) (42) ______________ _____________

(15) (43) _______________ ______________

(44) _____________ ____________

(20) (45) _____________ ____________

(21) (46) ______________ _____________

I______

(22) (47) _____________ ____________

(23) (48)

(24) (49)

(25) (501 3125 pslq . M p. 70=F At temp.

8. Design pressure 2500 Pslg. Temp.
  • 650
  • OF Hydra. test pressure Suppl-=eatd ifbrmadcn la th. furm of its, skc.tcbe, or drawings =ay b--provided (1) size Is 8 'A X 11, () icffti'-.o in items 2 and 3 on this Data Repor Is included on each sh*e;, (3) each sheet is numbered and the nvuber ofsbeets is recordld on the top of this form.

":14=1V'.lO, "il4W.V*C4 WZT1.MlJ.Lrd.d*:

FORM N-2(back Pg. 2 of 3 )

Certificate Holder's Serial Nos. 104J-01 through -

CERTIFICATION OF DESIGN Province Design specification certified by R. Klarner P.E. Sae Ont. Reg. No. 2406453 (when appicabae)

Province Design report* certified by L. Vizl P.E.,4ate Ont. Reg. No, 48244206 (WIen appliabie)

CERTIFICATE OF COMPLIANCE

'We certify that the statements made In this report are correct and that this (these) Reactor Vessel Head Conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authorization No. N-2791 Expires January 23, 2007 Date .a.,ý. /Name Babcock & Wilcox Canada Signed . 'e * ,.t . ,

(NP' CerVfcate Hotder) (a.tho1zed representaivw)

CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Ontario and employed by Technical Standards & Safety Authority of Ontario have Inspected these Items described In this Data Report on . ,and state that to the Best of my knowledge end belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code,Section III,Div.

Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concrnlng the equipment described In this Data Report Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind arising from or connected with this InspectIon.

Date6ae SIZ;ýSigned . '4 AuafZ6dnsat Commissions p~an.e+/- enmem~i]ind ,irnaorpray,sapra.J 5emenu) sna slate OrPmv- wSR67.

G:WaralrOp.IO~PN2IO4rOT1J~7EV~.da~

Attachment to FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed O'ne Day's Production PS- 3 of 3 Certificate Holder's Serial Nos 1041-01 through National Board Nos thlough

1. Manufactured and certified by Babcock &Wilcox Canada, 581 Coronation Boulevard, Cambridge, Ontario N1 R 5V3 2.Manufactured for Calvert Cliffs Nuclear Power Plant - Units 1 & 2
3. Location of Installation 1650 Calvert Cliffs Parkway, Lusby, Maryland 20657
4. Type; 104JE001 See List #1 See List #1 -- 2005 (drawing no.) (Mat'l Spec.no.) (tensile Slrength) (CRN) (year bultl
5. ASME Code, Section IIr, Division 1: 1995 1996 1 (edhlhon) (addenda data) (class) (Coce Case no.)

List #1:

Material Specification Tensile Strength (Min.)

80 ksi I.-

Closure Head SA-508 Gr. 3 Cl. 1 CEDM Nozzle SA-182 Gr. F316L/316 70 ksl CEDM Tube SB-167 UNS N06690 -85 ksl ICI Nozzle SA-182 Gr. F316L/316 70 ksl ICI Tube SB-167 UNS N06690 85 ksl Vent Pipe SB-167 UNS N06690 85 ksi List #2:

Nominal Thickness Minimum Design Thickness Closure Head 7.5" .4.38".

CEDM Nozzle 0.434" 0.279" CEDM Tube 0.430" 0.204" ICI Nozzle 0.430" 0.389" 101 Tube -. "" '0.380" " 0.283" Vent Pipe 0.114" 04050" I

OsO.j'J.~IO4W.7r1JA!~4,:

,C)'

Cii LA ~ -

(-CIO .

I~ 1 :~ 0 6 -+/-

I I

JOA-03-242 I- FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL A..NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed One Day's Production Pg. I of 2

1. Manufactured and certified by The Japso Stee! WorksLtd., .Muzoran Plant/4 Chatsu-macdhiuroran,HokkaidoO51-B505 Japan Iname end address of liFT Certliicate Haederl
2. Manufactured for Babcock & Wilcox, 581 Coronation Blvd., Cambridge, Ontario, NIR 5V3, Canada name aoidaddress of purchaser)
3. Location ofinstallation CALVERT CLIFFS-1 Nuclear Payer Plant, Naryland k .ý I and address]

loi1v--1Iame

4. Type 11148700l,. Ryev. -*21 SA-50B, or. 3 C1. 1. Min. 80 ksi "_ - _2003 Idraving nImel. Spec. 0o.1 (tensile atrangthl ICRPI lyear bullel
5. ASME Code,Section III, Division 1: 1995 (adieonl 1995 addenda I -

jaddenrc uesl (ealel (Cod. Case na.1

5. Fabricated in accordance with Const. Spec. (Div. 2 only) -" Revision Date -

Ino.)

7..1marks:

  • Rydostatic test is not pezformed in The Japan Steel Works, Ltd.

Cladding thIckness is inin. 0.20" from base metal Cladding materials are STA-5.4, APIS Cl. E309L-16 + E30BL-16 S. Nom. thickness (in.) 7 1/2" Min. design thlickne'ss (in.) 7 318" Dia. 10 (ft & In. 13'-l0" Length overall (fE& In.) 7'-1.75" S. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:

National National ,

Part or Appurtena'e" Board NP. Part or Appurtanance Board No.

Serial Numbdr .. .* . In Numerical Order Serial Number In Numerical Order

-() 1066 4692 (2) (27 (3) (28)

(41 J29L ,.

(5) (330)

(6) (31)

(7) (32)

(5) (33)

(9) (34)

(10) I(35

-'2)

- (37)

(13) (38) 114) (39)

(15) (40)

(16) (41)

(17) (42)

(18) (**{.43)

(20) * (45)__ _ _

(211 I(4E)

(22) (47)-

(231 -('49) -

(24) (491 -

(215) (50) 10, Design pressure I/A psi. Temp. N/A OF. Hydro, test pressure NIhI at temp. 11 lWhen Spolicablel J- Su;p=I.eine flinformation In the frm' of lists. sk-i:hae, cr drowincs may be used prcvide! (11 size Is El: x 11, (27inf:rm-..acn in hler. 2 end 3 on this Data A.,Tz:r, I includad on sac , sheo., 131 each. sheet is nurri ed Ind

, he njr u, 3 c,:. Is ,e a, th! 11c; c! .hi! form,.

7 .. This form Cz-.n.d 1OC040) may be fm the Order s..i.. AS-3, 22, Low Crive. E 200, Failitlc. NJ 0707-2300.f Hez-t I2o. C:2*030-i-- Jr;* PC* -1. i. E-0040 CI.D_=99--!

JOA-o3- 242 I- FORM N-2 (Back - Pg 2 of .

.r --,, Certificate Holder's Serial Nos. 1066 through kl- CERTIFICATION OF DESIGN Design specifications certified by N/A P.E. State NIA Reg. no. N/A Design report* certified by Iwh P P.E.State -/A Reg. no._

[whom opplIcible)

CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this Ithesel Part conforms to the rules of construction of the ASME Code,Section III,Division 1.  :

NPT Certificate of Authorization No. N-2725 Expires June,,29, 2004 The Japan Steel Vorks, Ltd.

Date Aug. 19, 2003 Name Muroran Plant Signed rIPITCerlllncalmHoldel (ahttibrized reg7esenrTtrvel

\J. Taira CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commis-sion Issued by the National Board of Boiler and Pressure Vessel Inspectors end the State or Province and employed by H.S.B.I. & I. Co.

of V* 'V. 1 E;PTFORD. CT. havelnspected theseItems described Inthis Date Report on-*'[*-*, L. .. and state that to the best of my knowledge and belief, -the Certificate Holder has fabricated these parts or appurtenances In Xccordance with the ASME Code, Section Ill, Division 1. Each pert listed has been authorized for-stamping on the date shown above.

By slgning this certificate, neltherthe Inspector nor his employer makes any warranty, expressed or implied, concerning the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind arising from or connected with this inspection.

"...}

IB10104,N,B,A IAutherind Nudlasr Inspaclarl Commissions INAMi8d. Ilind endorsemnenisl anldSig( atprov, andna.1 4-ý,Ovw-J 401- (vrýker

l. t

),716z"ý707ýadcjrlnj - /40, /.V/ý 3 To ýr-10C,_C-le,2 Ll j~,)

(~o~

S -.

  • IR Noj1 2019-1-310 (1/1)

RECORD OF MARKING THE JTPAN STEEL WOIIIS- LTO CusLonler BABCOCK & WILCOX MUROKINN PLANT User CONSTELLATION ENERGY GROUP Cumponent REPLACEMENT REACTOR PRESSURE VESSEEL HEADS I P.O.No. CM3334212 Datu of Isl :.g. _P*)

29 J' ProjeEt No.  : 104J Paris name :CLOSURE HEAD FORGING Project :CALVERT CLIFFS-1 Customer's part No 5214701 Stage :FAB. No. 30 JSW Job No. FN2-3019 Matiagcr of Inspectiun Group Material ASME SA-508. Gr.3 GLI WITH 5.S. OVERILAY Heat No. CLOSURE HEAD DOME :020908-1-1 LISEq.NO.. :3D)

CLOSURE HEAD FLANGE :'02D84-1-1 JSW PC No. I Customeres Dwg. No. 104JE,00 Ruv.J10 JSW Dwg.No. N1401g-6-NP Rev. 0 6JSW Spec. No. - I RLv.-

Date of Inspection ,Acc,2/?. 0oLo ccI "A /

Results Examined by C-.

L.)

rCs III.

WNflfl ~

I -

I i

~

- ii I-

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL

. NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Nesongton, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for _Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1,1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back **See Back N/A 2005 (drawing no.) (matl spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) '* (Code case no.)
6. Fabricated In accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly SIN 5178 and Motor Housing Assembly SIN 5207
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft &in.) 4.905" Length overall (ft & In.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:

National National Part or Appurtenance Board No. Part or Appurtenance Board No.

Serial Number In Numerical Order Serial Numbel In Numerical Order

)

(1I}

3222 N/A (26 (2) (27)

(3) _____

(4)

I.________

(28.) __________ __________

(29 I ___________________________________________________

(6)) I (30)

(6: (31)

(7) (32)

(8) (33)

(9)I _________________________ (34)

(10) (35)

(11) (36)

(12) (37)

(13) (38)

(14) (38)

(15) (40)

(16) (41)

(17) (42)

(18) (43)

(19) (44)

(20) (45)

(21) (46)

(22) (47)

(23) (48)

(24) (49)

(25) (50)

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 IF (when applicable)
  • Supplemental Information In the form of lists, sketches,.cr drawings may be used provided (1) size Is 8 Y: x 11, (2) Information In Items 2 and 3 on this Data Report Is Included on each sheet, (3) each sheet Is numbered and the number of the sheets Is recorded on this form.

Form N-2 FORM N-2 (Back - Pg. 2 of_2)

Certificate Holder' s Serial Nos. 3222 through 3222 CERTIFICATION OF DESIGN Design specifications certified by Donn M.Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, Date 0 Name LCC NewIngton Operations Signed (NPT certi*lcate Holder) (authorized representative)

CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New York and employed by HSB CT of Hartford, CT have Inspected these Items described In this Data Report on ______,_, "_ and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code, Section Iii, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind arising from or connecteýd w sIn lon.

Date .? e4 ESigned (Authorized Nuclear Inspector)

Commissions N'J5070 (Narl. Bd. (Incl. endorsements) and state or prov. and no.)

From Page 1, Une 4 DRAWING NO.

DWG.ITEM REV. NO.

ITEM MATERIAL DESCRIPTION IDENT. I MATERIAL SPECIFICATION ITENSILE(PSI)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA182 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21395 SA 182 F403-Mod 110,000 110,_000 Code Case N-.4-11 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA1 82 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75 000 08 2 Tube 04-0341 SA 213 TYPE 316 75, 000 SCEDM-163-102 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back **See Back N/A 2005 (drawing no.) (mat'l spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code, Section I11,Division 1: 1998 2000 1 N-4-11, 2142-2

- (edition) (addenda date) (class) (Cbde case no.)

6. Fabricated In accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEOM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly S/N 5191 and Motor Housing Assembly SIN 5209
8. Nom. thickness (In.) .240 Min. design thickness (in.) .167 Dia. ID (ft &in.) 4.905" Length overall (ft &In.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:

National National Part or Appurtenance Board No. Part or Appurtenance Board No.

Serial Number In Numerical Order Serial Number In Numerical Order (1) 3223 N/A (26)

(2) (27)

(3) -"- (28)

(4) _ (29)

(5) (30)

(6) (31)

(7) (32)

(8) (33)

(9) (34)

(10) (35)

(11) (36)

(12) (37)

(13) (38)

(14) (38)

(15) (40)

(16) (41)

(17) (42)

(18) (43)

(19) (44),

(20) (45)

(21) (46)

(22) (47)

(23) (48)

(24) (49)

(25) (50)

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 OF (when applicable)
  • Supplemental Information In the form of lists, sketches, or drawings maybe used provlded(1) size Is 8 a x 11. (2) Information in items 2 and 3 cnthis Data Repcrt Is Included on each sheet, (3) each sheet Is numbered and the number of the sheets Is recorded on this form.

Form N-2 FORM N-2 (Back - Pg. 2 of_2J Certificate Holder' s Serial Nos. 3223 through 3223 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certfied by *J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Electric Company, ,/ .,fl_

DateDae /-Westinghouse

)l//../1d. Name LCC Newrngton Operations Signed

,/(NPT Certificate Holder) (authorized representative)

CERTIFICATE OF INSPECTION C I,the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New York and employed by HSB CT of Hartford, CT have Inspected these Items described In this Data Report on ,V d -,' , and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code,Section III, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes anywarranty, expressed or Implied, concerning the equipment described In this Data ReporL Furthermore, neither the inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind arising from or connected with thy_.nsp!eýUon.

Date ___________ Signed _.,,, -C Cmmissions NY507T (Authorized Nuclear Inspector) (Nati. Bd. (Inct. endorsements) end state or prov. and no.)

  • From Page 1, Une 4 DRAWING 1DWG. 1ITEM IITEM I MATERIAL MATERIAL TENSILE NO. REV. NO. DESCRIPTION IDENT. SPECIFICATION (PSI)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA182 F348 70,000 SCEDM-163-112 07 2 Motor Housing MT21350 SA 182 F403-Mod 110,000 I Code Case N-4-11 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA182 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube. 04-0340 SA 213 TYPE 316 75,000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75,000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. I of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back **See Back N/A 2005 (drawing no.) (matl spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code, Section 11l,Division 1: 1998 2000 1 N-4-11, 2142-2 I (edition) (addenda date) (class) (Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consistingof Upper Pressure Housing Assembly S/N 5182 and Motor Housing Assembly S/N 5211
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & in.) 4.905" Length overall (ft &in.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:

National National Part or Appurtenance Board No. Part or Appurtenance Board No.

Serial Number In Numerical Order Serial Number In Numerical Order (1) 3224 N/A (26 )

(2)

(3)

(4)

(5)

(6)

I~ (27 )

(28 (29 ___________________________

(30:

(31) f ____________________________

(7) (32)

(8) (33)

(9) (34) 4 (10) (35) +

(11) (36)

(12) (37) 4.

(13) (38)

(14) (38)

(15) (40)

(16) (41)

(17) (42)

(18) (43)

(19) (44)

(20) (45)

(21) (46)

(22) (47)

(23) (48)

(24) (49)

(25) I.___________________________________________

(50) __________________________________________

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 OF (when applicable)
  • Supplemental Information In the form of lists, sketches, or drawings maybe used provided (1) size Is 8Yx 11. (2) Information In Items 2 and 3 on this Data Report Is Included on each sheet, (3) each sheet is numbered and the number of the sheets Is recorded on this form.

Form N-2 FORM N-2 (Back - Pg. 2 of_2)

Certificate Holder' s Serial Nos. 3224 through 3224 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A.Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Date

/,0 / . Westinghouse Electric Company.

Date

  • Name LCC Newington Operations Signed (NPT Certificate Holder.. C (authorized representative)

CERTIFICATE OF INSPECTION (-/

I,the undersigned, holding a valid commission Issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of New York and employed by HSB CT of Hartford. CT have Inspected these Items described In this Data Report on /A. r,/O"-

- and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code,Section III, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied. concerning the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind arising from or connected with l~lnsepton.

.h Date /S/i,.< Signed .- Commissions NY5070 (Authorized Nuclear Inspector) (Nat'l. 8d. (Incl. endorsements) and state or prev. and no.)

  • From Page 1, Line 4 DRAWING DWG. IITEM ITEM MATERIAL MATERIAL ITENSILE NO. . REV. NO. DESCRIPTION IDENT. SPECIFICATION (PSI)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA182 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21350 SA 182 F403-Mod Code Case N-4-11 110, 000 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA1 82 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0341 SA 213 TYPE 316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPTCertificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of Installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back "*SeeBack N/A 2005 (drawing no.) (madl spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code tase no.)
6. Fabricated in accordance with Const. Spec. (Div, 2 onily) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly S/N 5154 and Motor Housing Assembly SIN 5212
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & In.) 4.905" Length overall (ft & in.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:

National National Part or Appurtenance Board No. Part or Appurtenance Board No.

Serial Number In Numerical Order Serial Number In Numerical Order N/A (26) ___________

(1) 3225

___T___

(2) (27)

(3) (28)

(4) (29)

(5) (30)

(6) (31)

(7) (32)

(8) (33)

(9) (34)

(10) (35)

(11) (36)

(12)

(13)

(14) 3____

I _____________________________

(37)

(38)

(38)

(15) (40)

(16) (41)

(17) (42)

(18)

  • 1~

(43)

(19) (44)

(20) (45)

(21) (46)

(22) (47)

(23) (48)

(24) (49)

(25) (50)

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 OF (when applicable)
  • Supplemental Informaton In the form of'lists, sketches, or drawings may be used provided (1) size Is 8 Y2x 11. (2) information in items 2 and 3 on this Data Report Is Included on each sheet, (3) each sheet Is numbered and the number of the sheets Is recorded on this form.

Form N-2 FORM N-2 (Back - Pg. 2 of..

Certificate Holder' s Serial Nos. 3225 through 3225 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 DtP/Westinghouse Electrc Company, *

  • A ,f/ Z Date ~._Z7D/.LeO.,,. Name LCC Newington Operations Signed J/(NPT Certificate Holder) /"7 " (authorized representative)

CERTIFICATE OF INSPECTION V/

I,the undersigned, holding a valid commission Issued by the National Board of Bolter and Pressure Vessel Inspectors and the State or Province of New York and employed by HSB CT of Hartford. CT have Inspected these Items described In this Data Report on ___/___.________ , and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances in accordance with the ASME Code, Section I11, Division 1. Each part listed has been authorized for stamping on the date shown above.

Bysigning this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind arisingfrom or connected with IsIn Vtion.

Date - S!Zed tons NY507O mi..si..C-Ccmant ft (Authorized Nuclear Inspector) (Nat'. 8d. (incl. endorsements) and state or prov. end no.)

From Page 1, Une 4 DRAWING I DWG. 1 ITEM ITEM MATERIAL MATERIAL TENSILE NO. REV. NO. DESCRIPTION IDENT. SPECIFICATION (PSI)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA1 82 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21350 SA 182 F403-Mod 110, 000

___________ CodeCase N-4-11 _____

SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA182 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0341 SA 213 TYPE 316 75, 000 SCEDM-163-102 08 3

  • Lower End Fitting 28970 SA479TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code, Section Iii Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back -See Back N/A 2005 (drawing no.) (madl spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly SIN 5172 and Motor Housing Assembly S/N 5213
8. Nom. thickness (in.) .240 Min- design thickness (in.) .167 Dia. ID (ft & in.) 4.905" Length overall (ft & in.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each item of this report:

National Part or Appurtenance Board No.

Serial Number. in Numerical Order (26 3)

(27 (28 ) _________________________________________

(29 )

(30 ) _______________________________________________

(31 ) _______________________________________________

(32;) _____________________________________________________________________

(33)

(34)

(35)

(36)

(37)

(38)

(38)

(40)

(41)

(42)

(43)

(44)

(45)

(46)

(47)

(48)

(49)

(50)

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 OF (when applicable)

Supplemental Informaticn In the form of lists, sketches, cr drawings may be used provided (1) size Is 8 '/ x 11. (2) infrmaticn In items 2 an! 3 on this Data Report Is Included on each sheet (3) each sheet Is numlered and the number of the sheets Is re:orded on this form.

Form N-2 FORM N-2 (Back - Pg. 2 of2_.

Certificate Holder s Serial Nos. 3226 through 3226 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140

  • (when applicable)

Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code, Section I11,Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, Date Name LCC Newington Operations Signed (NPT Certi'cate Holder (authorized representative)

CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of NewYork and employed by HSB CT of Hartford. CT have Inspected these Items described In this Data Report on ,__,___._,,____" , and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code,Section III, Division 1. Each part listed has been authorized for stamping on the date shown above.

Bysigning this certificate, neither the Inspector nor his employer makes any warranty. expressed or Implied, concerning the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind arising from or connected with tIs In Vton.

a

  • Date ______Signed Commissions NY5070

" (Authorized Nuclear Inspector) (Na'l. Ed. (Incl. endorsements) and state or pryv. and no.)

From Page 1, Une 4 DRAWING DWG. ITEM ITEM 1 MATERIAL MATERIAL jTENSILE NO. REV. NO. DESCRIPTION IDENT. SPECIFICATION (PSI)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA182 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21 395 SA 182 F403-Mod I Code Case N-4-11 110, 000 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SAl 82 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting MT21404 SA 479 TYPE 316 " 75, 000 SCEDM-163-102 08 2 Tube 04-0341 SA 213 TYPE 316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive. Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of Installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back **See Back N/A 2005 (drawing no.) (mat'l spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code,Section III, Division.l: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly conslsting of Upper Pressure Housing Assembly S/N 5187 and Motor Housing Assembly S/N 5214
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & In.) 4.905" Length overall (ft & In.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:

National Part or Appurtenance Board No.

Serial Number In Numerical Order (1) 3227 N/A (2)

.(3)

(4)

(5)

(6)

(7)

(8)

(9)

(10)

(11)

(12)

(13)

(14)

(15)

(16)

(17)

(18)

(19) +

(20) +

(21) 1-(22)

(23)

(24)

(25)

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 'F (when applicable)

I Supplemental Information In the form oflists, sketches, er drawings may be used provided (1) s!ze Is 8 '%x 11. (2) Informaton In Items 2 and 3 on this Data Report Is Included cn each sheet, (3) each sheet Is numbered and the number of the sheets Is recorded on this form.

Form N-2 FORM N-2 (Back - Pg. 2 of2)

Certificate Holder' s Serial Nos. 3227 through 3227 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code, Section Ill, Division 1.

NPT Cerfificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, /

Date a,/0 7 . Name LCC Newington Operations Signed (NPT Certificate Holder) (authorized representative)

CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New York and employed by HSB CT of Hartford. CT have Inspected these Items described in this Data Report on .. _,,____,,,, __. _ ,and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code, Secton II1, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, conceming the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind arising from or connected wlth is Inspe n.

Date Signed ,-6

-lsslons NY5070 urorzed Nuclear Inspector) (NatI. Bd. (Ind. endorsements) and state or prov. and no.)

  • From Page 1, Line 4 DRAWING DWG. ITEM 1ITEM MATERIAL MATERIAL TENSILE NO. REV. NO. DESCRIPTION IDENT. SPECIFICATION (PSI)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA1 82 F348 70,9000 SCEDM-163-112 07 2 Motor Housing MTr21395 SA 182 F403-Mod 110,000 Code Case N-4-11 110,_000 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA182 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0341 SA 213 TYPE 316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington. NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinahouse Electric Co. LLC, 20 International Drive. Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back **See Back N/A 2005 (drawing no.) (marl spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code, Section I11,Division 1: 1998 2000 1 N-4-1 1, 2142-2 (edition) (addenda date) (class) (Code case 57.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly S/N 5204 and Motor Housing Assembly S/N 5215
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & in.) 4.905" Length overall (ft & in.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:

Part or Appurtenance National National Part or Appurtenanice Board No. Part or Appurtenance Board No.

Serial Number In Numerical Order Serial Number In Numerical Order (I) S"" 3228 N/A (26 (2

(3,) ___________ ___________

(27; (29)

(4;) _______________________________________________________________________________________

1 (28, ____________________________ ____________________________

.5-(5) (30)

(6) (31)

(7) (32)

(8) (33)

(9) (34)

(10) (35)

(11) (36)

(12) (37)

(13) (38) 4.

(14) (38)

(15) (40)

(16) (41)

(17) (42)

(18) (43)

(19) (44)

(20) (45)

(21) (46)

(22) (47)

(23) (48)

(24) (49)

(25) (50)

I

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 OF (when applicable)
  • Supplemental Information In the form of lists, sketches, or drawings may be used provided (1) size Is 8 i x 11. (2) Infrmation in items 2 and 3 on this Data Report IsIncluded on each sheet, (3) each sheet is numbered and the number of the sheets Isrecorded on this forn.

Form N-2 FORM N-2 (Back - Pg. 2 of_2 Certificate Holder' s Serial Nos. 3228 through 3228 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III,Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, Date ,0/12 . Name LCC Newington Operations Signed (NPT Certificate Holder) (authorized representative)

CERTIFICATE OF INSPECTION I, the undersIgned, holding a valid commIssIon Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New York and employed by HSB CT of Hartford. CT have Inspected these Items described In this Data Report on 7,4,7,,:i -r- and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code,Section III, Division 1. Each part lIsted has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind arising from or ccnnected with Jnsp .i on.

Date _ Signed "-Commissions NY5070 (Authorized Nuclear Inspector) (Nari. 8d. (Incd. endorsements) and state or prov. and no.)

'From Page 1, Line 4 DRAWING 1 DWG. ITEM ITEM MATERIAL I MATERIAL ITENSILE NO. REV. NO. DESCRIPTION IDENT. SPECIFICATION (PSI)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA182 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21350 Code SA 182 Case N-4-11 F403-Mod 10 110,000 0 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA182 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0340 SA 213 TYPE 316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75,000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code, Section IlI Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington. NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of Installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back **See Back N/A 2005 (drawing no.) (matI spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly S/N 5160 and Motor Housing Assembly SIN 5218
8. Noa. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & In.) 4.905" Length overall (ft & In.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:

National National Part or Appurtenance Board No. Part or Appurtenance Board No.

Serial Number In Numerical Order Serial Number In Numerical Order 3229 N/A 3) _________________________

(1) (26 (2 (27,) ______________________

(3)) (28 ) _______________________

(29 )___________________________

(4)

(5)

(30 (6) (31; (7) (32)

(8) (33)

(9) (34)

(10) (35)

(11) (36)

(12) (37)

(13) (38)

(14) (38)

(15) (40)

(16) (41)

(17) (42)

(18) (43)

(19) (44)

(20) (45)

(21) (46)

(22) (47)

(23) (48)

(24) (49)

(25) (50)

10. Design pressure 2500 psi, Temp. 650 cF, Hydro. test pressure 3125 psi at temp. 60 'F (when applicable)
  • Supplemental Information In the form of lists, sketches, or drawings may be used provided (1) size Is 8 A x 11. (2) Information In Items 2 and 3 on this Data Report is Included on each sheet, (3) each sheet Is numbered and the number of the sheets Is recorded on this form.

Form N-2 FORM N-2 (Back - Pg. 2 of_2 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. Slate CT Reg. no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPUANCE We certify that the statements made In this report are correct and that this (these) CEOM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company. , ,

Date /0/b2 /,P.<" Name LCC Newington Operations SIgned /

S(NPT Certficate Holder) _ (authorized representative)

CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission Issued by the Naiorqal Board of Boiler and Pressure Vessel Inspectors and the State or Province of New York and employed by HSB CT of Hartford, CT have Inspected these Items described In this Data Report on ./' , ./'" , and stale that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code,Section III, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described In this Data Report Furthermore, neither the Inspector nor his employer shall be table In any manner for any personal Injury or property damage or loss of any kind arising from or connected with,IN Insp;n.

Commissions NY5070 f Date / Signed (Authorized Nuclear Inspector) (Natl. Bd. (Inc. endorsements) and state or prov. and no.)

  • From Page 1, Une 4 DRAWING IDWG, 'jITEM ITEM MATERIAL 'j MATERIAL TENSILE NO. REV. ' NO. DESCRIPTION . IDENT. .SPECIFICATION (PSI)

SCEDM-1 63-112 07 1 Upper End Fitting 04-0279 SAl 82 F348 70, 000 SCEDM-163-112 07 2 Motor_____Code Housing MT21395 SA 182 CaseN-4-11 F403N-Mod 110,____00 110,000 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA182 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0341 SA 213 TYPE 316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75,000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC. 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of Installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back **See Back NIA 2005 (drawing no.) (marl spec. no.) .. (tensile strength) (CRN) (year built)
5. ASME Code, Section II1,Division 1: 1998 2000 1 N.4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated In accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEOM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly SIN 5199 and Motor Housing Assembly S/N 5219
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft &In.) 4.905" Length overall (ft & In.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:

National National Part or Appurtenance Board No. Part or Appurtenance Board No.

Serial Number In Numerical Order Serial Number In Numerical Order (1) . . 3230 N/A (26)

(2) 1 (27)

(3) (28)

(4) (29)

(5) (30)

(6) (31)

(7) (32)

(8) (33)

(9) (34)

(10) (35)

(11) (36)

(12) (37)

(13) (38)

(14) (38) .

(15) (40)

(16) (41)

(17) (42)

(18) (43)

(19) (44)

(20) (45)

(21) (46)

(22) (47)

(23) (48)

(24) (49)

(25) (50)

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 OF (when applicable)

Supplemental Information Inthe form of lists, sketches, or drawings may be used provided (1) size Is8 Y2x 11. (2) information In items 2 and 3 on this D0aa Report Is Included on each sheet, (3) each sheet Is numbered and the number of the sheets Is recorded on this form.

Form N-2 FORM N-2 (Back - Pg. 2 of_2 Certificate Holder' s Serial Nos. 3230 through 3230 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, Date L/'0A/Z., Z.. Name LCC Newington Operations Signed (NPT Certificate Holder) (authorized representative)

CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boner and Pressure Vessel Inspectors and the State or Province of New York and employed by HSB CT of Hartford, CT have Inspected these Items described In this Data Report on 4_1Z,_916-r_ _ , and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code, Section 1l1, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or loss of any kind arising from or connected Y s ns on.

Date _________ SIgned ,- Commissions NY5070 (Authorized Nuclear Inspector) (Nat'l. 8d. (Incl. endorsements) and state or prov. and no.)

From Page 1, Line 4 DRAWING DWG. - ITEM ITEM MATERIAL MATERIAL TENSILE NO. REV. NO. DESCRIPTION IDENT. SPECIFICATION (PSI SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA182 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21350 SA 182 F403-Mod 10,000 Code Case N-4-11 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA182 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0340 SA 213 TYPE 316 75,000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. I of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type *See Back **See Back **See Back NIA 2005 (drawing no.) (matr spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code, Section 1II, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated In accordance with Const. Spec. (Div. 2 only) N/A Revision NIA Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly SIN 5162 and Motor Housing Assembly SIN 5220
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & In.) 4.905" Length overall (ft & In.) 214.8'
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:

National Part or Appurtenance Board No.

Serial Number In Numerical Order (1) 3231 N/A (2;

4(3 (4)

(5)

(6)

(7)

(8)

(9)

(10)

(11)

(12)

(13)

(14)

(15)

(16)

(17)

(16)

(19)

(20)

(21)

(22)

(23)

(24)

(25)

10. Des~gn pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 OF (when applicable)

Supplemental Information In the form of lists, sketches, or drawings may be used provided (1) size is 8 Yi x 11. (2) Information InItems 2 and 3 on this Data Report Is Included on each sheet, (3) each sheet is numbered and the number ofthe sheets Is recorded on this form.

Form N-2 FORM N-2 (Back - Pg. 2 of2l Certificate Holder s Serial Nos. 3231 through 3231 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code, Section ItI, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Date Name Westinghouse Electric Company, LCC NewIng ton Operations (NPT Certificate Holder)

Signed

/o,,/

h, /,et.

" (authorized representative)

CERTIFICATE OF INSPECTION V I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New York and employed by HSB CT of Hartford, CT have Inspected these Items described In this Data Report on , and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code, Section I11, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes anywarranty, expressed or Implied, concerning the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind adslng from or connected with, InS on.

Date ,Sined Commissions NY5070 (Authorized Nuclear Inspector) (Nat'l. Bd. (Incl. endorsements) and state orprov. and no.)

  • From Page 1, Line 4 DRAWING DW G. 1ITEM 1ITEM IMATERIAL MATERIAL ITENSILE NO. REV. NO. DESCRIPTION IDENT. SPECIFICATION (PSI)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA182 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21350 SA 182 Code F403-Mod Case N-4-11 110,000 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA1 82 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0341 SA 213 TYPE 316 75, 000

,CEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back **See Back N/A 2005 (drawing no.) (mail spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated in accordance wth Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly S/N 5212 and Motor Housing Assembly S/N 5208
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & In.) 4.905" Length overall (ft & In.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:
  • National Part or Appurtenance Board No.

Serial Number in Numerical Order (26*) I j

(27 ____________________________________________________

(28 ) ______________________________________________________

(29 ) ____________________________________________________

(30) _________________________________________________________

(31; ) _____________________________________________________________________

(32)

(33)

(34)

(35)

(36)

(37)

(38)

(38)

(40)

(41)

(42)

(43)

(44)

(45)

(46)

(47)

(48)

(49)

(50)

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 OF (when applicable)
  • Supplemental Information In the form of lists, sketches, or drawings may be used provided (1) s!ze Is 8 Xzx 11. (2) information InItems 2 and 3 on this Data Report is included on each sheet, (3) each sheet Is numbered and the number of the sheets Is recorded on this form.

Form N-2 FORM N-2 (Back - Pg. 2 of2 Certificate Holder' s Serial Nos. 3232 through 3232 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. Slate CT Reg. no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, ill Date Name LCC Newfngton Operations Signed *

(NPT Certificate Holder) (authorized representative)

CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New York and employed by HSB CT of Hartford, CT have Inspected these Items described In this Data Report on , and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code,Section III, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind arising from or connected with l*ninsp on.'

Date SIgned - o ,a n o Commissions NY5070 (Authorized Nuclear Inspector) (Narl. Bd. (Inc. endorsements) and state or prov. and no.)

  • From Page 1, Une 4

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back .. See Back **See Back N/A 2005 (drawing no.) (mat'l spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code, Section Iii, Division 1: 1998 2000 1 N-4-11, 2142-2 (editon) (addenda date) (class) (Code case no.)
6. Fabricated In accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly S/N 5211 and Motor Housing Assembly S/N 5221
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & In.) 4.905" Length overall (ft & in.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:

National National.

Part or Appurtenance Board No. Part or Appurtenance Board No.

Serial Number in Numerical Order Serial Number In Numerical Order (1) 3233 N/A (26 (2) (27

  • (3)

(4)

(5)

(6)

(7)

(28 (29)

(30 (31; (32)

___________________________ I______

(8) (33)

(9) (34)

(10) ____________ ___________

(35) 4.

(11) ________________ ________________ (36)

  • l.

(12) (37) 4.

(13) (38)

(14) (38)

(15)____________ ___________ _

(40)

(16)___________ _

(41)

(17) (42)

(18) ____________

(43)

(19) (44)

(20) (45)

(21) (46)

(22) (47)

(23) (48)

(24) (49)

(25) I.

(50) __________________________________________

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 OF (when applicable)
  • Supplemental Information Inthe form of lists, sketches, or drawings may be used pmvfded (1) size Is 8 2 x 11. (2) Information Initems 2 and 3 on this Data Report Is Included on each sheet, (3) each sheet Is numbered and the number of the sheets Is recorded on this form.

Form N-2 FORM N-2 (Back - Pg. 2 of3.)

Certificate Holder's Serial Nos. 3233 through 3233 CERTIFICATION OF DESIGN Design speciications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company.

Date ,/ . Name LCC Newlngton Operations Signed (NPT Certificate Holder) (authorized representative)

CERTIFICATE OF INSPECTION I,the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New York and employed by HSB CT of Hartford, CT have Inspected these Items described in this Data Report on ____ ,,,-,__ "_", and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance w4th the ASME Code,Section III, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspectdr nor his employer makes any warranty, expressed or Implied, concerning the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind arising from or connected with Pis Ins ,ction.

Date Sl*ned Commissions NY5070 (Authorized Nuclear Inspector) (Natl. Bd. (incl. endorsements) and state or prov. and no.)

"From Page 1, Line 4 DRAWING DWG. ITEM ITEM MATERIAL MATERIAL TENSILE NO. REV. NO. DESCRIPTION IDENT. SPECIFICATION (PS I)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA182 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21350 SA 182 Code F403-Mod Case N-4-11 110,000 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA182 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-1 63-102 08 2 Tube 04-0340 SA 213 TYPE 316 75, 000 SCEDM-163-102 08. 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name end address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type "*SeeBack **See Back "See Back N/A 2005 (drawing no.) (marl spec. no.) (tensile strength) (CRN) (year buift)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) '(Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly S/N 5175 and Motor Housing Assembly S/N 5222
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & in.) 4.905" Length overall (ft & In.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:

National National Part or Appurtenance 'Board No. Part or Appurtenance Board No.

Serial Number In Numerical Order Serial Number in Numerical Order

)

(i 3234 N/A (26 (2 ) (27 (3 ) _____________ (28 (4:) ___________ ___________ (29:

(5:) _________________________________________________________________________ (30)

(6) (31) ______________________________________ .1 (7) (32)

(8) (33)

(9) (34)

(10) (35)

(11) (36)

(12) (37) I4 (13) (38) 4 (14) (38)

(15) (40)

(16) (41)

(17) (42) 4 (18) (43)

(19) (44)

(20) (45)

(21) (46)

(22) (47)

(23) (48)

(24) (49)

(25) (50)

I

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 OF (when applicable)
  • Supplemental Information In the form of lists, sketches, or drawlngs may be used provided (1) size Is 8 %x 11. (2) informatoni In Items 2 and 3 cn this Data Re po,'t Is Included on each sheet, (3) each sheet Is numbered and the number of the sheets Is recorded on this fcrm.

Form N-2 FORM N-2 (Back - Pg. 2 of2)

Certificate Holder' s Serial Nos. 3234 through 3234 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Date ,,/,,0 //Z  ;:*- Name Westinghouse LCC NewingtonElectric Company, Operations (NPT Certificate Holder)

Signed h, (authorized representative)

CERTIFICATE OF INSPECTION 1,the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New York and employed by HSB CT of Hartford, CT have Inspected these Items described in this Data Report on ,,___,_,_'-__ -" , and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code,Section III, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind arisingfrom or connected wI I on.

Date , Signed , Commissions Ny5070

' (Authorized Nuclear Inspector) (Nat'l. Bd. (Incl. endorsements) and state or prov. and no.)

From Page 1, Line 4 DRAWING 1DWGJ ITEM IITEM J MATERIAL MATERIAL ITENSILE NO. REV.- NO. DESCRIPTION IDENT. SPECIFICATION (PSI)

SCEDM-163-112 07 1 Upper End Fittng 04-0279 SA182 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21350 SA 182 Code CaseF403-Mod N-4-11 110,000 110,_000 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA182 F348 70, 000 SCEDM-1 63-102 08 1 Upper End Fitting MT21404 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0341 SA 213 TYPE 316 75, 000 SCEDM-163-102 08 .3 Lower End Fitting 28970 SA 479 TYPE 316 75,000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. I of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of Installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type *See Back **See Back **See Back N/A 2005 (drawing no.) (mat'l spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated In accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEOM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly S/N 5151 and Motor Housing Assembly S/N 5227
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 DIa. ID (ft &In.) 4.905" Length overall (ft &In.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:

National Part or Appurtenance Board No.

Serial Number In Numerical Order (26 (27 (28 (29)

(30)

(31)

(32)

(33)

(34)

(35)

(36)

(37)

(38)

(38)

(40)

(41)

(42)

(43)

(44)

(45)

(46)

(47)

(48)

(49)

(50)

I

10. Design pressure 2500 psi, Temp. 650 CF, Hydro. test pressure 3125 psi at temp. 60 'F (when applicable)

' Supplemental lnfcrmatdon In the form of lists, sketches, or drawings may be used provided (1) size Is 8 A x 11. (2) infomation In items 2 ead 3 on this Data Report Is Included on each sheet, (3) each sheet Is numbered and the number of the sheets is recorded on this fbrm.

Form N-2 FORM N-2 (Back - Pg. 2 of_2)

Certificate Holder's Serial Nos. 3235 through 3235 CERTIFICATION OF DESIGN Design specifications certdiedby Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, ..

Date /0 Z Name LCC Newington Operations Signed (NPT Certificate Holder) (authorized representative)

CERTIFICATE OF INSPECTION I,the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New York and employed by HSB CT of Hartford, CT have Inspected these Items described In this Data Report on - , and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code, Section lIt, Division 1. Each par litsted has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind arising from or connected :wt slnspe- n.

Date Signed Commi slsns NY5070 (Authorized Nuclear Inspector) (Natl. Sd. (Incl. endorsements) and state or prov. and no.)

From Page 1, Une 4 DRAWING 1 DWG. ITEM ITEM MATERIAL MATERIAL TENSILE NO. REV. NO. DESCRIPTION IDENT. SPECIFICATION (PSI)

SCEDM-163'112 07 1 Upper End Fitting 04-0279 SA182 F348 70, 000 SCEDM-163-112 07 2 MotorHousSMT21403 A182 F403-Mod Motor Housing Code Case N-4-1l1 110,000 SCEDM-1 63-112 07 3 Lower End Fitting 04-0280 SA182 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0341 SA 213 TYPE 316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75. 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back **See Back NIA 2005 (drawing no.) (matl spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code, Section I11,Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated In accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly S/N 5155 and Motor Housing Assembly S/N 5234
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & In.) 4.905" Length overall (ft &In.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each item of this report:

National National Part or Appurtenance Board No. Part or Appurtenance Board No.

Serial Number In Numerical Order Serial Number In Numerical Order (1) 3236 N/A (26 )

4.

(2) (27 (3) (28; (4) (29; (5) (30)

(6) (31) I __________________

(7) (32)

(8) (33)

(9) (34)

(10) (35)

(11) (36)

(12) (37)

(13) (38)

(14) (38)

(15) (40)

(16) (41)

(17) (42)

(43)

(19) ________________________

(44)

(20) (45)

(21) (46)

(22) (47)

(23) (48)

(24) (49)

(25) (50)

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 osi at temp. 60 OF (when applicable)

Supplemental Infornaticn In the form of lists, sketche s, or drawings maybe used provided (1) size Is 8 2 x 11. (2)Incmation In items 2 and 3 on this Data Repcrt is Included on each sheet, (3) each sheet Is numbered and the number afthe sheets Is recorded on this form.

Form N-2 FORM N-2 (Back - Pg. 2 ofA2 Certiricate Holder' s Serial Nos. 3236 through 3236 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPUANCE We certify that the statements made In this report are correct and that this (these) CEOM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificateof"Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, Date , J0, Name LCC Newington Operations Signed (NPT Certificate Holder) (authorized representative)

CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of NewYork and employed by HSB CT I of Hartford, CT have Inspected these Items described In this Data Report on ____,,,___,.__ , and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code,Section III.

Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate. neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described In this Data Report. Furthermore, nelther the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind arising from or connected with this Ins on.

4 Date .L'

  • i Signed .. Commissions NY5070 (Authorized NuclearInspector) (Nat'l. Bd. (Incl. endorsements) and state or prov. and no.)
  • From Page 1, Line 4 DRAWING DWG. 1 ITEM ITEM MATERIAL MATERIAL TENSILE NO. REV. NO. DESCRIPTION IDENT. SPECIFICATION (PSI1 SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA182 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21403 SA 182 F403-Mod Code Case N-4-11 110,000 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA182 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0341 SA 213 TYPE 316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC. 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type *See Back **See Back "See Back N/A 2005 (drawing no.) (marl spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly SIN 5202 and Motor Housing Assembly SIN 5235
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft &In.) 4.905" Length overall (ft & in.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each Item ofi this report:

National National Part or Appurtenance Board No.: Part or Appurtenance Board No.

Serial Number In Numerical Order Serial Number in Numerical Order MI/A (1) J~3I INII~ (26 3)

(2) (27 (3) (28 4 (4) (29

+

(5) (30; (6)

(7)

(8)

_____________________________ .1~ (31)

(32)

(33)

(9) (34)

(10) (35)

(11) (36)

(12) (37)

(13) (38)

(14) (38)

(15) (40)

(16) (41)

(17) (42)

(18) (43)

(19) (44)

(20) (45)

(21) (46)

(22) (47)

(23) (48)

(24) (49)

(25) (50)

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 CF (when applicable)

Suppleme.tal Information Inthe form of lists, sketches, or drwlngs may be used pro,,ded (1) size Is 8 %x 11. (2) information In Items 2 end 3 on this Data Report Is Included on each sheet, (3) each sheet Is numbered and the number of the sheets Is recorded on this fc,"n.

Form N-2 FORM N-2 (Back - Pg. 2 of02 Certificate Holder' s Serial Nos. 3237 through 3237 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A.Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authorization No. N-2041 Expires ... February 20, 2008 Westinghouse Electric Company, Date // Z Name LCC Newington Operations Signed C (NPT Certificate Holder) (authorized representative)

CERTIFICATE OF INSPECTION I,the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New York and employed by HSS CT of Hartford. CT have Inspected these items described In this Data Report on ____,___, e" and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code,Section III.

Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, conceming the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind arising from or connected with thIsspect Date Sinsed Commissions NY5070 (Authorized Nuclear Inspector) (Nai'l. Gd. (incl. endorsements) and state or prov. and no.)

I

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certifcate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back -See Back **See Back N/A 2005 (drawing no.) (mall spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code, Section ill, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEOM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly S/N 5205 and Motor Houslng Assembly S/N 5236
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & in.) 4.905" Length overall (ft &In.) 214.6"
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:

National National Part or Appurtenance Board No. Part or Appurtenance Board No.

Seidal Number In Numerical Order Serial Number In Numerical Order (1) - 3238 N/A (26)

(2) (27)

(3) (28)

(4) (29)

(5) (30)

(6) (31)

(7) 1 (32)

(8) (33)

(9) (34)

(10) (35)

(11) (36)

(12) (37)

(13) (38)

(14) (38)'

(15) (40)

(16) (41)

(17) (42)

(18) (43)

(19) (44)

(20) (45)

(21) (46)

(22) (47)

(23) (48)

(24) _ (49)

(25) (50)

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 IF (when applicable)
  • Supplemental Inbaraatcn In the forh of lists, sketches, cr drawings may be used provided (1) size Is 8 A x 11. (2) Infornation In Items 2 and 3 on this Data Report IsIncluded on each sheet, (3) each sheet Is numbered and the number of the sheets Is recorded on this form..

Form N-2 FORM N-2 (Back - Pg. 2 of.2)

Certificate Holder' s Serial Nos. 3238 through 3238 CERTIFICATION OF DESIGN Design specificalions certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State CT Reg. no, 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this (these) CEOM Pressure Housing Assembly conforms to the rules of construction of the ASME Code, Section I11,Division 1, NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, " .

Date /=D//*,V O,* Name LCC Newington Operations Signed (NPT Certificate Holder) (authorized representative)

CERTIFICATE OF INSPECTION I,the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New York and employed by HSB CT of Hartford, CT " have Inspected these Items described In this Data Report on 7,,,,.f and state thai to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code,Section III, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this cerdtficate, neither the inspector nor.his employer makes any warranty, expressed or Implied, concerning the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any.personal Injury or property damage or loss of any kind arising from or connected with Date Signed

  • Commissions NY5070 (Authorized Nuclear Inspector) (Nati. 8d. (incl. endorsements) and state or prov. and no.)

From Page 1, Line 4 DRAWING - DWG. f1ITEM ITEM MATERIAL MATERIAL TENSILE NO. .REV. NO. DESCRIPTION I IDENT. SPECIFICATION (PSI)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 SAl 82 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21395 SA 182 F403-Mod 110,000 Code Case N-4.11 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA1 82 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0340 SA 213 TYPE 316 75, 000 SCEDM-1 63-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT certificate Holder)
2. Manufactured for Westinahouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of Installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back **See Back N/A 2005 (drawing no.) (madl spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) .(Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEOM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly SIN 5196 and Motor Housing Assembly SIN 5708
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (it & In.) 4.905" Length overall (it & in.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:

National National National Board No.

Part or Appurtenance Part or Appurtenance Board No.

Serial Number In Numerical Order Serial Number In Numerical Order (1 3239 N/A (26 ))

(2,) (27 (3;I (28 (4) (29;

+

(5) (30; 1-(6) (31)

(7) (32)

(8) (33)

(9) (34)

(10) (35)

(11) (36)

(12) (37)

(13) (38)

(14) (38)

(15) (40)

(16) (41)

(17) (42)

(18) (43)

(19) (44)

(20) (45)

(21) (46) f____________

(22) (47)

(23) (46)

(24) (49)

(25) _____________________________ (50)

I

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 CF (when applicable)
  • Supplemental Information Inthe form of lists, sketches, or drawings may be used provided (1) stze Is 8 ' x 11. (2) Ir.formalron in Items 2 and 3 on this Data Report Is Included on each sheet (3) each sheet Is numbered and the number of the sheets is recorded on this forn.

Form N-2 FORM N-2 (Back - Pg. 2 ofJ Certificate Holdere s Serial Nos. 3239 through 3239 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A.Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, 'h Date Ii*,b,;,ý Name LCC Newington Operations (NPT Certificate Holder)

Signed h', g, (authorized representative)

CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New York and employed by HSB CT d ,

of Hartford, CT have Inspected these items described in this Data Report on / '-3,J '. and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code, Section II1, Division 1. Each part listed has been authorized for stamping on the date shown above.

Bysigning this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, conceming the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or loss of any kind arising from or connected with. thlspe Date 40 O"Signed Commissions NY5070 (Authorized Nuclear Inspector) (Nat'l. d. (Incl. endorsements) and stale orprov. and no.)

From Page 1, ine 4 DRAWING DWG. ITEM ITEM MATERIAL MATERIAL TENSILE NO. REV. NO. DESCRIPTION IDENT. SPECIFICATION (PSI)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA182 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21391 SA 182 Code F403-Mod Case N-4-11 110, 000 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA182 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0340 SA 213 TYPE 316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinqhouse Electric Co. LLC, 20 International Drive, Windsor. CT 06095-0500 (name and address of purchaser)
3. Location of Installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back "See Back N/A 2005 (drawing no.) (marl spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date .N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly S/N 5186 and Motor Housing Assembly S/N 5709
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & In.) 4.905" Length overall (ft & In.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:

National National PartSerial or Appurtenance Number Board No. Part or Appurtenance Board No.

Q-4ý1 tK1h h=

k, 1 In = Ahn

,,,I n' 4l~

In Numerical Order (1 3240 N/A (26) ______________________________

) ___

II___il____lll.___I_______.,ll_____ l',,,,,______,._________

(2 (27 (3; (28 (4) (29; (5) (30)

(6) (31)

(7) (32)

(8) (33)

(9) (34)

(10) (35)

(11) (36)

(12) (37)

(13) (38)

(14) (38)

(15) (40)

(16) (41)

(17) (42)

(18) (43)

(19) (44)

(20) (45)

(21) (46)

(22) (47)

(23) (48)

(24) (49)

(25) (50)

I

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 OF (when applicable)

ISupplemental Informaticn In the form oflists, sketches, or drawirgs may be used pmvlded (1) size Is 8 ' x 11. (2) infrnation in [tems 2 and 3 on this Data Report Is Included on each sheet, (3) each sheet Is numbered and the numberofthe sheets Is recorded on this fcrm.

Form N-2 FORM N-2 (Back - Pg. 2 of_2J Certificate Holder' s Serial Nos. 3240 through 3240 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this (these) CEOM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, Date Z*Q2-s' Name LCC Newington Operations (NPT Certificate Holder)

Signed /--(authorized representative)

CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New York and employed by HSB CT

  • e of Hartford, CT have Inspected these Items described in this Data Report on .. , dfi,.- , and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances Inaccord'ance'with the ASME Code,Section III, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In anymanner for any personal Injury or property damage or loss of any kind arising from or connected with Vs Insp.,*h.

- I Date Slne Commissions NY5070 (Authorized Nuclear Inspector) (Natl. Bd. (incl. endorsements) and state or prov. and no.)

  • From Page 1, Line 4 DRAWING DWG. )ITEM 1ITEM MATERIAL MATERIAL ITENSILE NO. REV. NO. DESCRIPTION IDENT. SPECIFICATION _ PSI)

SCEDM-1 63-112 07 1 Upper End Fitting 04-0279 SA182 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21391 SA 182Case Code F403-Mod N-4-11 110,0ooo 110,_000 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA182 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0341 A213 TYPE 316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back *"SeeBack NIA 2005 (drawing no.) (mall spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated In accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date NIA (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly S/N 5214 and Motor Housing Assembly S/N 5710
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft &In.) 4.905" Length overall (ft &In.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report

' National National Part or Appurtenance Board No. Part or Appurtenance Board No.

Serial Number In Numerical Order Serial Number In Numerical Order (I I 3241 N/A (26 (2 ) _________________________________________________________________________ (27 (3:) _______________________ (28 (4) (29)

(5) (30)

(6) (31) 4 (7) (32)

(8) (33) 4 (34)

(35)

(36)

(12) (37)

(13) (38)

(14) (38)

(40)

+

(41)

(17) (42)

(43) ______________________________________________________________________

(44)

I (20) (45)

(21) (46)

(22) (47) t (23) (48)

(24) (49)

(25) ________________________________________________ (50)

I I

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 osi at temp. 60 OF (when applicanle)
  • Supplemental Information in the form of lists, sketches, ordrawlngs maybe used provided (1) size IsBY. x 11. (2) Information In Items 2 and 3 on this Data Report Is Included on each sheet, (3) each sheet Is numbered and the number of the sheets Is recorded on this form.

Form N-2 FORM N-2 (Back- Pg. 2 of_2 Certificate Holder' s Serial Nos. 3241 through 3241 CERTIFICATION OF DESIGN Design speciricalions certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certiried by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code, Section IIl, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, Date e,011 I- Name LCC Newington Operations Signed ' . .

(NPT Certificate Holder) '(authorized representative)

CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of New York and employed by HSB CT of Hartford, CT have Inspected these Items described In this Data Report on Z4'7A3 OS , and state that to the best of my knowledge and belief, the Certificate Holderhas fabricated these parts or appurtenances In accordance with the ASME Code, Section Ill, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing thlis certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or loss of anty kind arising from or connected wlth'this Inspe .n.

Date _ Signed - Commissions NY5070 (Authorized NuclearInspector) (Nat'l. ed. (incl. endorsements) and state or prov. and no.)

From Page 1, Line 4 DRAWING I DWG. ITEM )ITEM j MATERIAL MATERIAL TENSILE NO. REV.' NO. J DESCRIPTION IDENT. SPECIFICATION J PSI)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA1 82 F348 70, 000 Code Case N-4-i11 1000 SCEDM-163-112 07 2 Motor Housing MT21391 SA 182 F403-Mod 110,000 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA182 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 s, 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0340 SA 213 TYPE 316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA'479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of Installation Calvert Cliffs Unit 1. 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back **See Back N/A 2005 (drawing no.) (mati spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date NIA (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly S/N 5166 and Motor Housing Assembly SIN 5711
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (it &in.) 4.905" Length overall (ft & In.) 214.8"
9. When applicable. Certificate Holders' Data Reports are attached for each Item of this report:

National. National Part or Appurtenance Board No. Part or Appurtenance Board No.

Serial Number in Numerical Order Serial Number In Numerical Order 3242 N/A (26*)

(1)

(2) (27t)

(3) (28 (4) (29 (5) (30 +

(6) (31)

+

(7) (32:

4-(8) (33)

(9) (34)

(10) (35)

(11) (36)

(12) (37)

(13) (38)

(14) (38)

(15) (40)

(16) (41)

(17) (42)

(18) (43)

(19) (44)

+

(20) (45)

+

(21) (46)

  • 1-(22) (47)

(23) (48)

(24) (49)

(25) (50)

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 OF (when applicable)
  • Supplemental Information In the form of lists, sketches, ordrawlngs may be used provided (1) size Is 8 %x 11. (2) Inforn'a'Jon In Items 2 and 3 on this Data Report Is included on each sheet, (3) each sheet Is numbered and the number of the sheets Is recorded on this form.

Form N-2 FORM N-2 (Back- Pg. 2 of 2)

Certificate Holder' s Serial Nos. 3242 through 3242 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A.Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008

/ 17

,I Date 0Nam Name Westinghouse Electric Company, LCC Newington Operations Signed _ C.4 Date 6o (NPT Certlitcate Holder) (authorized representative)

CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New York and employed by HSB CT of Hartford, CT have Inspected these Items described In this Data Report on , , and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code,Section III, Division 1. Each part listed has'been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implled,'concemrng the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind arising from or connected withJjPsInspetion.

Date J**i*S I Signed Commissions NY5070 (Natl. 8d. (incl. endorsements) and state or prov. and no.)

(Authorized Nuclear Inspector)

From Page 1, Line 4 DRAWING DWG. 1 ITEM ITEM MATERIAL MATERIAL I TENSILE NO. REV. NO. DESCRIPTION IDENT. SPECIFICATION (PSI)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA182 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21391 Code SA 1C2 Case N-4-11 F403-Mod 10 110,000 0 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA182 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0341 SA 213 TYPE 316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. I of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certiricate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of Installation Calvert Cliffs Unit 1. 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back **See Back N/A 2005 (drawing no.) (marl spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code.Section III, Division 1: i998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case ho.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly S/N 5174 and Motor Housing Assembly S/N 5712
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & In.) 4.905" Length overall (ft & in.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:

National Part or Appurtenance Board No.

Serial Number In Numerical Order (26 (27)

(28 I (29 (30 (31)

(32)

(33)

(34)

(35) +

(36)

  • 1-(37)

(38)

(38)

(40)

(41)

(42)

(43)

(44)

(45)

(48)

(47)

(48)

(49)

(50)

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 OF (when applicable)
  • Supplemental information Inthe form of lists, sketches, erdrawings may be used provlded (1) s!zesI8 V.x 11. (2) Infrmation Initems 2 and 3 on this Data Report Is Included on each sheet, (3) each sheet Is numbered and the number of the sheets Is recorded on this form.

Form N-2 FORM N-2 (Back - Pg. 2 of 2)

Certificate Holder' s Serial Nos. 3243 through 3243 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State

  • CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Date Z O Name Westinghouse Electric Company, LCC Newngton Operations Signed

(~ II (NPT Certificate Holder) 7 ' (authorized representative)

CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New York and employed by HSB CT of Hartford, CT have Inspected these Items described In this Data Report on 1,4'/,/. .5 , and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code. Section I11.

Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his 4mployer makes aný warranty, expressed or Implied, concerning the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind arising from or connected with th!ýIispýln Date kind___sng Signed t sCommissions NY5070 (Authorized Nuclear Inspector) (Nati. Bd. (Incl. endorsements) and state or prov. and no.)

  • From Page 1, Une 4 DRAWING OWG. ITEM ITEM I MATERIAL 1 MATERIAL ITENSILE NO. REV. NO. DESCRIPTION IDENT. SPECIFICATION (PSI)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA182 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21391 SA 182 F403-Mod 110, 000 S__1-1 0 2_____ Motor__Housing __T21391 Code Case N-4-11 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA182 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting . MT21404 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0341 SA 213 TYPE 316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road. Newington, NH 03801 (name and address ofNPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type "*SeeBack "*SeeBack **See Back N/A 2005 (drawing no.) (marl spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (editon) (addenda date) (class) (Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly SIN 5194 and Motor Housing Assembly SIN 5217
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & In.) 4.905" Length overall (ft & In.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:

National National Part or Appurtenance Board No. Part or Appurtenance Board No.

Serial Number ' in Numerical Order In Numerical Order (2) Serial Number

.0 11t 3244 N/A (2 ) (27)

(3 (28) ___________ _

(4) ___________ (29)

(5;) _________________________________________________________________________ (30) __________ _

(6;) _________________________________________________________________________

(31) ____________ ____________

(7) (32)

(8) (33) ____________ ___________ _

(9) *(34)__ _ _ _ _ _ _ _ _ _

(10) (35)

(11) (36) ____________ ____________

(12) (37) ____________ ____________

(13) (38) ____________ ___________ _

(14) (38) ____________ ___________ _

(15) (40) ____________ ____________ _

(16) (41) ___________ ___________

(17) (42) ____________ ___________ _

(18) (43)___________ _

(19) (44) ___________ _

(20) (45) ___________ _

(21) (46) ____________ ___________ _

(22) (47) ___________ ___________

(23) (48) ____________ ___________ _

(24) (49) ____________ ___________ _

(25) (50)

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 OF (when applicable)

' Supplemental Informatlon In the form of lists, sketches, or drawings may be used provided (1) size Is 8 'Ax 11. (2) Information in Items 2 and 3 on this Data Repcrt Is Included on each sheet (3) each sheet Is numbered and the number of the sheets Is recorded on this form.

Form N-2 FORM N-2 (Back - Pg. 2 of_21 Certificate Holder s Serial Nos. 3244 through 3244 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and that this (these) CEOM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authoriza.tion No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, Date Name LCC Newington Operations S (NPT Certiticate Holder) (authorized representative)

CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New York and employed by HSB CT of Hartford, CT have Inspected these Items described In this Data Report on _ _ ,and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance wth the ASME Code, Section 111, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind arising from or connected with t.Il. InS n Date 74Z TA*-f Slned

  • Commissions NY5070

/ / (Authorized Nuclear Inspector) (Natl. Bd. (Incl. endorsements) and state or prov. and no.)

From Page 1, Une 4 DRAWING DWG. ITEM ITEM MATERIAL 'MATERIAL j TENSILE NO. REV. NO. DESCRIPTION IDENT. SPECIFICATION (PS 1 SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA1 82 F348 70, 000 SCEDM-163-112 07 I 2 Motor Housing MT21350 SA 182 Code F403-Mod Case N-4-11 110,000 110,_000 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA182 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0340 SA 213 TYPE 316 75,000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75,000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. I of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back "*See Back *See Back N/A 2005 (drawing no.) (matl spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2

.editlon) (addenda date) (class)-. (Code case no.)

6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly SIN 5185 and Motor Housing Assembly S/N 5226
8. Noa. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & in.) 4.905" Length overall (ft & In.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each item of this report:

National National Part or Appurtenance Board No. Part or Appurtenance Board No.

Serial Number in Numerical Order Serial Number In Numerical Order (1 3245 (26)

(2 (27)

(3,) ______________________________________________________________ (28)

(4; (29)

(5) (30)

(6) (31)

(7) (32)

+

(8) (33) +

(9) _____________________________________I ___________________________________ (34) 1-I__________________

(10) (35)

(11) (36)

(12) _____________________________________________________________ (37)

(13) (38)

(14) (38) .4.

(15) (40)

+

(is) (41).

(17) (42).

(18) (43) .

(19) (44) .

(20) (45)

I (21) (46)

(22) (47)

(23) (48)

(24) (49)

(25) (50) ____________________________

I I

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 cF (when applicable)

ISupplemental informaticn In the form cf lists, sketches, or drawings may be used provided (1) size Is8 Y2x 11. (2)Information In Items 2 and 3 on this Data Repcrt IsIncluded on each sheet. (3)each sheet Is numbered and the number of the sheets Is recorded on this ftrm.

Form N-2 FORM N-2 (Back - Pg. 2 of_2 Certificate Holder' s Serial Nos. 3245 through 3245 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, Date. , O3A

_//.V Name LCC Newington Operations Signed ' ,

I , (NPT Certificate Holder) r (authorized representative)

CERTIFICATE OF INSPECTION I. the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New York and employed by HSB CT of Hartford, CT have Inspected these Items described In this Data Report on zj ,.0" - . and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance--with the ASME Code, Section Ill, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described In this Data Report. Furthermore, neith.er the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind arising from or connected is 1inection.

IL Date , Signed- " Commissions NY5070 (Authorized Nuclear Inspec*o~j (Natl. 8d. (inc.endorsements) and state or prov. and no.)

  • From Page 1, Line 4 DRAWING DWG. ITEM , ITEM MATERIAL MATERIAL TENSILE NO. REV. NO. J DESCRIPTION IDENT. SPECIFICATION (PSI)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA182 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21403 Code SA 182 Case N-4,-11 F403-Mod 10 110,000 0 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA182 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0341 SA213 TYPE 316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75,000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back **See Back N/A 2005 (drawing no.) (mat1 spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code, Section II1,Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEOM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly S/N 5203 and Motor Housing Assembly SIN 5703
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & In.) 4.905* Length overall (ft & In.) 214.8,
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:

National Part or Appurtenance Board No.

Serial Number In Numerical Order (26

+

(27 (28 (29; (30)

(31) 4 (32)

.1.

(33) 4 (34)

(35) ~1-(36)

(37)

(38)

(38)

(40)

(41)

(42)

(43)

(44)

(45)

(46)

(47)

(48)

(49)

(50).

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 Psi at temp. 60 OF (when applicable)
  • Supplemental Infornmation Inthe form of lists, sketcres, or drawings may be used provided (1) size Is 8 '/ x 11. (2) Informatlon In Items 2 and 3 on this Data Report Is Included on each sheet, (3) each sheet Is numbered and the number of the sheets Isrecorded on this fcrn.

Form N-2 FORM N-2 (Back - Pg. 2 of_2)

Certificate Holder' s Sedal Nos. 3246 through 3246 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State -CT Reg. no. 12140 (wvhen applicable)

Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this (these) CEOM Pressure Housing Assembly conforms to the rules of construction of the ASME Code, Section II1,Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, Date _A &I

, ,.,1 ý:, Name LCC Newington Operations Signed (NPT Certificate Holder) '(authorized representative)

CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Bolier and Pressure Vessel Inspectors and the State or Province of New York and employed by HSB CT of Hartford, CT have Inspected these Items described In this Data Report on , ',and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In acccdrdanc'e with the ASME Code,Section III, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind arising from orcohnected with this Ins pVon.

Date __,________ Signed A Commissions NY5070 (Authorized Nuclear Inspector) (Nartl. Bd. (Incl. endorsements) and state or prov. and no.)

From Page 1, Line 4 DRAWING DWG. ITEM ITEM 1 MATERIAL MATERIAL TENSILE NO. REV. NO. DESCRIPTION IDENT. SPECIFICATION (PSI)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA182 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21391 SA 182 F403-Mod 110, 000

___________________CodeCase

_____ N-4-11 ______

SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA182 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0340 SA 213 TYPE 316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back **See Back N/A 2005 (drawing no.) (marl spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated In accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly SIN 5152 and Motor Housing Assembly S/N 5707
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & in.) 4.905" Length overall (ft & In.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each item of this report:

National National Part or Appurtenance Board No. Partor Appurtenance Board No.

Serial Number In Numerical Order Serial Number In Numerical Order 3)

(1, 3247 N/A (26 (2 (27 3)

(3) (28 ) ________________________

(4) (29 ) _______________________

(5) (30 (6) (31 (7) (32:

(8) (33; (9) (34)

(10) (35)

(11) (36)

(12) (37)

(13) (38)

(14) (38)

(15) (40) ., ___________________________ ___________________________

(16) (41)

(17) (42)

(18) (43)

(19) (44)

(20) (45)

(21) (46)

(22) (47)

(23) (48)

(24) (49)

(25) (50)

I I

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 OF (when applicable)
  • Supplemental Information In Lne form of lists, sketches, or drawngs may be used provlded (1) size Is 8 A x 11. (2) Information In Items 2 and 3 on this Data Report Is Included on each sneet, (3) each sheet Is numbered and the number of the sheets Is recor"ed on this f.rrn.

Form N-2 FORM N-2 (Back - Pg. 2 of2]

Certificate Holder' s Serial Nos. 3247 through 3247 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design reoort certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, ,4 01. -. .

Date IO/t/ /e.,S*'- Name LCC Newington Operations Signed A/ic Jl(-l I / (NPT Certificate Holder) , ' ' (authorized representative)

CERTIFICATE OF INSPECTION U I,the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New York and employed by HSB CT t of Hartford. CT have Inspected these Items described In this Data Report on /47_,5___0_5_ , and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code,Section III, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind arising from or connected wlth thl Inspý on.

Date 2.,*!,*.i Signed Commissions C NY5070

- / (Authorized Nuclear Inspector) (Nat'l. 8d. (incl. endorsements) and state or prov. and no.)

  • From Page 1, Une 4 DRAWING QWG. ITEM ITEM MATERIAL MATERIAL TENSILE NO. REV. NO. DESCRIPTION IDENT. SPECIFICATION (PSI)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA182 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21391 SA 182 F403-Mod 110,000 Code Case N-4-11 __110,_00 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA1 82 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0341 SA 213 TYPE 316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back "*See Back N/A 2005 (drawing no.) (marl spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly S/N 5181 and Motor Housing Assembly S/N 5722
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & in.) 4.905" Length overall (ft & in.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:

National.,

Part or Appurtenance Board No.

Serial Number In Numerical Order (26

) ____________________________________________________________

(27 )

(28

) ____________________________________________________

(29, ) _____________________________________________________________________

(30; (31)

(32)

(33)

(34)

(35)

(36)

(37)

(38)

(38)

(40)

(41)

(42)

(43)

(44)

(45)

(46)

(47)

(48)

(49)

(50)

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 OF (when applicable)
  • Supplemental Information In the form of lists, sketches, or drewlngs may be used provided (1) size Is 8 2 x 11. (2) Information Initems 2 and 3 on this Data Report Is included on each sheet, (3) each sheet Is numbered and the number of the sheets Is recorded on this form.

Form N-2 FORM N-2 (Back - Pg. 2 of2)

Certficate Holder s Serial Nos. 3248 through 3248 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this (these) CEOM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Date /*/3O,. Name H C Westinghouse LeG Newington Electanc Company,epodby Signed Operations

/ 4" (NPT Certficate Holder) (,,/ "(authorized representative)

CERTIFICATE OF INSPECTION 1.the undersigned, holding a valid commission Issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of New York - -and employed by HSB CT *-

of Hartford, CT have Inspected these Items described In this Data Report on ,0 / O.g "- , and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code,Section III, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certilfcate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or loss of any klnd arslng from or connected wit thpIns.i on.

ft Date -V/ ,,, 5-. Signed Commissions NY5070 (Authorized Nuclear Inspector* (Nat'l. Bd. (incl. endorsements) and state or prov. and no.)

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back **See Back N/A 2005 (drawing no.) (madlspec. no.) (tensile strength) (CRN) (year built)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) Revision N/A Date N/A_
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly SIN 5197 and Motor Housing Assembly S/N 5701
8. Nora. thickness (In.) .240 Min. design thickness (in.) .167 Dia. ID (ft & In.) 4.905" Length overall (ft & In.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:

National Part or Appurtenan'ce Board No.

Serial Number In Numerical Order

)

(26 (27, (28:

(29; (30) 4-(31)

(32)

(33)

(34)

(35)

(36)

(37)

(38)

(38)

(40)

(41)

(42)

(43)

(44)

(45)

(46)

(47)

(48)

(49)

(50) I _________

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 OF (when applicable)

'Supplemental Information In the form of llsts, skelches, or drawings may be used provided (1) size Is 8 Y x 11. (2) Information In Items 2 and 3 on this Data Report Is Included cn each sheet, (3) each sheet Is numbered ard the number of the sheets Is recorded on this form.

Form N-2 FORM N-2 (Back - Pg. 2 of_2 Certificate Holder' s Serial Nos. 3249 through 3249 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E State CT Reg. no. 12140 (when applicable)

Design report certified by J. A.Stevens P.E. State CT Reg. no. " 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this (these) CEOM Pressure Housing Assembly conforms to the rules of construction of the ASME Code, Section I11,Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, Date /,b . Name LCC Newington Operations Signed 7T . (NPT Certificate Holder) (authorized representative)

CERTIFICATE OF INSPECTION I,the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or ProvInce of New York and employed by HSB CT " /, ° of Hartford, CT have Inspected these Items described in this Data Report on /o." , and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code, Section 11, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described in this Data Report. Furthernrrore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind arising from or connected ithPsInpdction.

Date Signed "e " Commissions NY5O7O 1 (Authorized Nuclear Inspector) (Nat'l. Bd. (Incl. endorsements) and state orprov. and no.)

"From Page 1, Line 4 DRAWING DWG. ITEM ITEM MATERIAL ) MATERIAL TENSILE NO. REV. NO. DESCRIPTION IDENT. SPECIFICATION (PSI)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA182 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21391 SA 182 F403-Mod 110,000

_____________ ____________Code Case N-4-11______

SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA182 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0340 SA 213 TYPE316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newlngton, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back .. See Back **See Back N/A 2005 (drawing no.) (mat'l spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code, Section I11,Division 1: 1998 2000 1 N-4-11, 2142-2 (editon) .(addenda date) (class) (Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly S/N 5210 and Motor Housing Assembly S/N 5704
8. Nom. thickness (in.) .240 Min. design thickness (In.) .167 Dia. ID(ft &In.) 4.905" Length overall (ft &In.) 214.8*
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:

National Part or App'urtenance Board No.

Serial Number in Numerical Order (26 3)

(27 (28 (29 )

_j (30)) ____________________________________________________

(31.

(32 (33)

(34)I _____________________

(35)

(36)

(37)

(38)

(38)

(40)

(41)

(42)

(43)

(44)

(45)

(46)

(47)

(48)

(49)

(50) F

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 osi at temp. 60 IF (when applicable)

Supplemental Information Inthe form of lists, sketches, or drawings may be used proAded (1) size Is 8 '2 x 11. (2) Information In Items 2 and 3 on this Data Report IsIncluded on each sheet, (3) each sheet Is numbered and the number of the sheets Is recored on this form.

Form N-2 FORM N-2 (Back - Pg. 2 of_2 Certificate Holder' s Serial Nos. 3250 through 3250 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, eA Date 10 J ,S Name LCC Newfngton Operations Signed (NPT Centificate Holder) (authorized representative)

CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New York and employed by HSB CT of Hartford, CT have Inspected these Items described In this Data Report on ,______/_._ , and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance wAth the ASME Code,Section III, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described In this Data Report. Furthermore, neither the inspector nor his employer shall be liable In any manner for any personal injury or property damage or loss of any kind arising from or connected witthisI ction.

Date __ -_ Signed . Commissions NY5070

// ("Authorzed Nuclear Inspector) (Nat'l. Bd. (incl. endorsements) and state or prov. and no.)

From Page 1, Une 4 DRAWING , DWG. ITEM , ITEM MATERIAL MATERIAL TENSILE NO. J REV. NO. DESCRIPTION IDENT. SPECIFICATION (PSI)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA182 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21391 SA 182 F403-Mod 110,000 Code Case N-4-11 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA182 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0340 SA 213 TYPE 316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive. Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back **See Back N/A 2005 (drawing no.) (manl spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code, Section II1,Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly SIN 5200 and Motor Housing Assembly S/N 5705
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & in.) 4.905" Length overall (ft & In.) 214.8,
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:
  • National Part or Appurtenance Board No.

Serial Number In Numerical Order

)

(26 (27 ) ___________________________ ___________________________

(28, (29)

(30)

(31)

(32)

(33)

(34)

(35)

(36)

(37)

(38)

(38)

(40)

(41)

(42)

(43)

(44)

(45)

(46)

(47)

(48)

(49)

(50)

I

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 IF (when applicable)
  • Supplemental Information In the form of lists, sketches, or drawIngs may be used provided (1) size Is 8 Y2 x I1. (2) Information in items 2 and 3 on this Data Repc."t Is included cri each sheet, (3) each sheet Is numbered and the number of the sheets Is recorded on this form.

Form N-2 FORM N-2 (Back- Pg. 2 ofQ Certificate Holder's Serial Nos. 3251 through 3251 CERTIFICATION OF DESIGN Design specifications certified by' Donn M. Matteson P.E. State -CT Reg. no. 12140 (when applicable)

Design report certified by- J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this (these) CEOM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authorization No. N-2041 .. Expires February 20, 2008 Westinghouse Electric Company, " .e-e4re Da Name LCC Newlngton Operations Signed (NPT Certficate Holder) (authorized representative)

CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission Issued by the Natonal Board of Boiler and Pressure Vessel Inspectors and the State or Province of New York and employed by HSB CT of Hartford, CT have Inspected these items described In this Data Report on ,/IV/ and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In acco ance with the ASME Code. Section 1it.

Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector norhis employer makes any warranty, expressed or Implied, concerning the equipment described in this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind arising from or connected withls Iesction.

Date Sinned Commissions NY5070 (Authorized Nuclear Inspector) (Natt. Bd. (incl. endorsements) and state or prov. and no.)

  • From Page 1, Line 4 DRAWING DWG. ITEM ITEM 'MATERIAL MATERIAL TENSILE NO. REV. *NO. DESCRIPTION IDENT. SPECIFICATION (PSI)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA1 82 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21391 SA 182 F403-Mod 110,000 Code Case N-4-11 1_ 0,_000 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA182 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0340 SA 213 TYPE 316 75, 000.

SCEDM-1 63-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road. Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of Installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back -See Back N/A 2005 (drawing no.) (mat1 spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated In accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly SIN 5213 and Motor Housing Assembly S/N 5713
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & in.) 4.905" Length overall (ft & In.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:

Part or Appurtenance National Part or Appurtenance Board No.

Serial Number In Numerical Order (0) 3252 NIA (2

(3:

(4)

(5)I. ___________

(6)

(7)

(8)

(9)

.1 (10) ______________________________________________________________________________________

(11)

(12)

(13)

(14)

(15)

(16)

(17)

(18)

(19)

(20)

(21)

(22)

(23)

(24)

(25)

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 °F (when applicable)

I Supplemental Infcrmation In the form oflists, sketches, ordrawings may be used pro'Aded (1) size Is 8 'Y x 11. (2) Information in iterns 2 and 3 on this Data Report Is Included on each shaet, (3) each sheet Is numbered and the number of the sheets Is recosded on this form..

Form N-2 FORM N-2 (Back - Pg. 2 of2.

Certificate Holder s Serial Nos. 3252 through 3252 CERTIFICATIOI NOF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg.no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, Date /,9L/3I0< Name LCC Newinaton Ooerations (NPT Certificate Holder) .

Signe~ ~ (authorizedrepresentative)

CERTIFICATE OF INSPECTION I. the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New York and employed by HSB CT /- I of Hartford. CT have Inspected these Items described In this Data Report on and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code. Section Ill, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described In this Data Report Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind arising from or connected with isins Ution.

Dale _____,_._ Signed Commissions NY5070 (Authorized Nuclear Inspector) (Nat'l. 8d. (incl. endorsements) and state or prov. and no.)

From Page 1, Line 4 DRAWING DWG. 1 ITEM , ITEM MATERIAL MATERIAL TENSILE NO. REV. NO. DESCRIPTION IDENT. SPECIFICATION (PSI)

SCEDM-163-112 "A ..07 1 Upper End Fitting 04-0279 SAl 82 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21391 SA 182 F403-Mod 110, 000 Code Case N-4-1 I SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA182 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0340 SA213 TYPE 316 .75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of Installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type *See Back **See Back **See Back N/A 2005 (drawing no.) (mat'l spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code, Section II1,Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated In accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly S/N 5184 and Motor Housing Assembly S/N 5784
8. Noa. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & in.) 4.905" Length overall (ft & in.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:

National National Part or Appurtenance Board No. Part or Appurtenance Board No.

In Numerical Order Serial Number Serial Number in Numerical Order (1 ) 3253 N/A I (26 (2 )

(3, (27 (28 )

T (4)) _________________________________________________________________________ (29 (5;I (30 (6) (31; (7) (32)

(8) (33)

(9) (34)

+

(10) (35)

(11) (36)

(12) (37)

(13) (38)

(14) (38)

I____

(15) (40)

(16) (41)

(17) (42)

(18) (43)

(44) ____________________________

(20) (45)

(21) (46)

(22) (47)

(23) (48)

(24) (49)

(25) (50)

I

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 OF (when applicable)

Supplemental Information In the form oflists, sketches, crdrawings may be used p;vided (1) sIze ls 8 Y x 11. (2) Informaticn In items 2 and 3 on this Data Re~ort IsIncluded on each sheet, (3) each sheet Is numbered and the number of the sheets Is recnrded on this form.

Form N-2 FORM N-2 (Back - Pg. 2 of 2)

Certificate Holder' s Serial Nos. 3253 through 3253 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable) .

Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate .of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, Date , /,1 0S Name LCC Newington Operations Signed J (NPT Certificate Holder) (authorized representative)

CERTIFICATE OF INSPECTION 1,the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New York and employed by HSB CT of Hartford, CT have Inspected these Items described In this Data Report on ._______165_,,/-_ , and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code.Section III, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerming the equipment described In this Data Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal Injury or property damage or loss of any kind arising from or connected wl I cton.

Date Signed Commissions NY5070 '=" !

(Authorized Nuclear Inspector) (Nat'l. 8d. (incl. endorsements) and state or prov. and no.)

  • From Page 1, Line 4 DRAWING DW G. ITEM ITEM IMATERIAL 1 MATERIAL 1TENSILE NO. REV. NO. I DESCRIPTION IDENT. SPECIFICATION . (PSI)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA182 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21388 SA 182 F403-Mod 110,000 Code Case N-4-11 _10,__00 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA182 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0341 SA 213 TYPE 316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC. 74 Old Dover Road. Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back **See Back N/A 2005 (drawing no.) (marl spec. no.) (tensile strength) (CRN) (year bulit)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly S/N 5201 and Motor Housing Assembly S/N 5714
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & In.) 4.905" Length overall (ft & In.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each item of this report:

National Part or Appurtenance Board No.

Serial Number in Numerical Order 3)

(26 (27 T)

(28 )________________________________________________

(29 ) _______________________________ _______________________________

(30 (31; (32)

(33)

(34)

(35)

(36)

(37)

(38)

(38)

(40)

(41)

(42)

(43)

(44)

(45)

(46)

(47)

(48)

(49)

(50)

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 OF (when applicable)
  • Supplemertal Infomiaton In the form of lists, sketches, or drawIngs may be used provided (1) size Is 8 %x 11. (2) Information In items 2 and 3 on this Data Report Is Included on each sheet, (3) each sheet Is numbered and the number of the sheets Is recorded on this form.

Form N-2 FORM N-2 (Back - Pg. 2 of_2)

Certificate Holder s Serial Nos. 3254 through 3254 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and (hat (his (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code, Section Itt, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, Signed Date //W,- Name LCC Newington Operations Signed/ -

(NPT Certificate Holder) (authorized representative)

CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New Hampshire and employed by HSB CT of Hartford, CT have inspected these Items described In this Data Report on 9 / and state that to the best of myknowledge and belief, the Certificate Holder has fabricated these parts or appurtenances in accordance with the ASME Code,Section III, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described In this Data Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal Injury or property damage or loss of any kind arsing from or connected with this Inspetcion.

Date / 'l, " Signed * -* Commissions NH71O (Authorized Nuclear Inspector) (Nat'l. Bd. (incl. endorsements) and state or prov. and no.)

From Page 1, Line 4 DRAWING 1DWG. jITEM ITEM MATERIAL MATERIAL TENSILE NO. REV. NO. DESCRIPTION IDENT. SPECIFICATION (PSI)

SCEDM-1 63-112 07 1 Upper End Fitting 04-0279 SA1 82 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21391 SA 182 F403-Mod 1o,000 110,_000 Code Case N-4-11 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA182 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0340 SA 213 TYPE 316 75, 000 SCEDM-1 63-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. I of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road. Newington, NH 03801 (name and address of PIPT Certificate Holder)
2. Manufactured for Westinqhouse Electric Co. LLC, 20 International Drive. Windsor. CT 06095-0500 (name and address ofpurchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **SeeBack **See Back **See Back N/A 2005 (drawing no.) (madl spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) * (Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly S/N 5208 and Motor Housing Assembly S/N 5717
8. Nom. thickness (in,) .240 Min. design thickness (in.) .167 Dia. ID (ft &in.) 4.905* Length overall (ft & in.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each item of this report:

National Part or Appurtenance Board No.

SeHal Number In Numerical Order

)

(26 (27 (28)

(29)

(30)

(31)

(32)

(33)

(34)

(35)

(36)

(37)

(38)

(38)

(40)

(41)

(42)

(43)

(44)

(45)

(46)

(47)

(48) I-(49)

(50)

I

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 OF (when applicable)
  • Supplemental informadcin Inthe form oflists, sketches, or drawings may be used provided (1) size Is 8 Y,x 11. (2) (nfonmation in Items 2 antd 3 on (his Daia Repcrt Is Included on each sheet, (3) each sheet Is numbered and the number of the sheets is recorded on this fcrm.

Form N-2 FORM N-2 (Back - Pg. 2 of_2 Certificate Holder' s Serial Nos. 3255 through 3255 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A.Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, Date . ',

4,,-,-/ - Name LCC Newington Operations (NPT Certiricate Holder)

Signed

/

(authorized representative)

V CERTIFICATE OF INSPECTION I,the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New Hampshire and employed by HSB CT , -

of Hartford. CT have Inspected these Items described In this Data Report on /O/11,,"/:w' and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code, Section Iii.

Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or loss of any kind arising from or connected th" e. . *Ins *.

Date Signed Commissions NH71O0 (Authorized Nuclear Inspector) (NaVt. Ed. (ind. endorsements) and state or prov. and no.)

  • From Page 1, line 4

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1. 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back **SeeBack N/A 2005 (drawing no.) (marl spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code.Section III. Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly SIN 5188 and Motor Housing Assembly SIN 5720
8. Nom. thickness (in.) .240 Min. design thickness (In.) .167 Dia. ID (ft &In.) 4.905" Length overall (ft & in.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each item of this report:

11.

Natonal National Part or Appurtenance Board No. Part or Appurtenance Board No.

Serial Number In Numerical Order Serial Number In Numerical Order (1f 3256 N/A (26)

____I____ I (2 (27)

(3. (28) ____________________________ ____________________________

(4; (29)

(5) (30) 4 (6) (31)

(7) (32) +

(8) (33)

(9) (34)

(10) (35)

(11) (36)

(12) (37)

(13) (38)

(14) (38)

(15) .4.

(40)

(16) (41)

(17) (42)

(18) (43)

(19) (44)

(20) (45)

(21) (46)

(22) (47)

(23) (48)

(24) (49)

(25) (50)

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 OF (when applicable)
  • Supplemental information In the formn of lists, sketches, or draw!ngs may be used provided (1) slze Is 8 Y x 11. (2) informaton In Items 2 and 3 on this Data Repcrt is included on each sheet, (3) each sheet is numbered and the number of the sheets Is reccrded cn this form.

Form N-2 FORM N-2 (Back - Pg. 2 of.21 Certificate Holder s Serial Nos. 3256 through 3256 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, [V Date Name LCC Newington Operations Signed (NPT Certificate Holder) (authorized representative)

CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of NewHampshire and employed by HSB CT . ,

of Hartford, CT have Inspected these items described In this Data Report on "/ , and state that to the best of my knowledge and belief, the Certiricate Holder has fabricated these parts or appurtenances In accordance with the ASME Code,Section III, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described In this Data Report. Furthermore, neither the inspector nor his employer shall be liable In any manner for any personal fnjqriy or property damage or loss of any kind arising from or connected with this InspectUn.

Date . ~ Signed (Authorized Nuclear Inspector)

Commissions NH710 (Nat'l. 8d. (Incl. endorsements) and state or prov. and no.)

DRAWING From Page 1, Une 4 NO.

DOWG JREV.

ITEM, NO.

I TEM MATERIAL DESCRIPTION IOENT.

MATERIAL SPECIFICATION TENSILE (PSI)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA182 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21391 SA 182 F403-Mod 110,000 Code Case N-4-11 110,_000 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA182 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75 000 SCEDM-163-102 08 2 Tube 04-0341 SA 213 TYPE 316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back **See Back N/A 2005 (drawing no.) (matl spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) -(Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly S/N 5190 and Motor Housing Assembly S/N 5766
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft &In.) 4.905" Length overall (ft & In.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each item of this report:

National Part or Appurtenance Board No.

Serial Number In Numerical Order (26 (27 (283)

+

(29 (30 (31 (32 (33; (34)

(35)

(36)

(37)

(38)

(38)

(40)

(41)

(42)

(43)

(44)

(45)

(46)

(47)

(48)

(49)

(50)

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi attemp. 60 OF (when applicable)
  • Supplemental Informaton Inthetform of lists, sketches, or drawings may be used provided (1) size Is 8 ' x 11. (2) Information In items 2 and 3 on this Data Report Is Included on each sheet, (3) each shert Is numbered and the number of the sheets Is recorded on this fom,.

Form N-2 FORM N.2 (Back - Pg. 2 of_2 Certificate Holder's Serial Nos. 3257 through 3257 CERTIFICATION OF DESIGN Design specifications. certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State CT .Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this (these) CEOM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, Date /0 /Z Name LCC Newington Operations Signed A (NPT Certificate Holder) (authorized representative)

CERTIFICATE OF INSPECTION I,the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province or New Hampshire and employed by HSB CT of Hartford, CT have Inspected these Items described Inthis Data Report on , and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code, Section 1.

Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property darm.age or loss of any kind arisingfrom or connected whis Inspecoi, Date Ncerns Commissions NH71n (Authorized Nuclear Inspector) (NatI. 8d. (inc. endorsements) and stale or prov. and no.)

  • From Page 1, Line 4 DRAWING DWG. ITEM I ITEM MATERIAL MATERIAL TENSILE NO. IREV. NO. DESCRIPTION IDENT. SPECIFICATION (PSI)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 . SA1 82 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21388 SA 182 F403-Mod 110,000 Code Case N-4-11 110,_0_0 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA182 F348 70, 000 SCEDM1 63-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0340. SA213TYPE3I6 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75,000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. I of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back "See Back **See Back N/A 2005 (drawing no.) (mall spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly S/N 5167 and Motor Housing Assembly S/N 5772
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & In.) 4.905" Length overall (ft & In.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each item of this report:
10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 OF (tthenapplicable)
  • Supplemental Infornation In .ne fcrm or lists, sketches, or drawlngs may be used provided (1) size Is 8 Y x 11. (2) nnfcrmation in items 2 and 3 cn this Data Report Is Included on each sheet, (3) each sheet is numbered and the numrber of te sheets Is recorded cn this to.,

Form N-2 FORM N-2 (Back - Pg. 2 of_2)

Certificale Holder s Serial Nos. 3258 through 3258 CERTIFICATION OF DESIGN

[Design specifications certified by Donn M. Mvatteson P.E. State -CT Reg. no. '12140 (when.applicable)

Design report certified by J.-A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code. Section Il, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20. 2008 Westinghouse Electric Company, , q (21 Date /10 Name LCC Newington Operations Signed (NPT Certificate Holder) . (authozed representative)

CERTIFICATE OF INSPECTION I. the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New Hampshire and employed by HSB CT I of Hartford, CT have Inspected these Items described In this Data Report on ____________ . and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code,Section III.

Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind arising from or connec this nspe n..

Ill.

Date ' SlpnedC *""--' Commissions NH710 (Authorized Nuclear Inspector) (Nai'l. 8d. (Incl. endorsements) and state or pmv. and no.)

  • From Page 1. Une 4 DRAWING DWG. 1ITEM ITEM MATERIAL ) MATERIAL TENSILE NO. REV. NO. DESCRIPTION IDENT. . SPECIFICATION (PSI)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA182 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21388 SA 182 F403-Mod 110,000 Code Case N-4-11 _ 10,_000 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA1 82 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting MT21404 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0341 75,000

____________________ _________ SA 213TYPE 316 7,0 SCEDM-163-102 08 3 1 ower End Fitting 28970 SA 479 TYPE 316 75,000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC. 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of Installation Calvert Cliffs Unit 1,1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back **See Back N/A 2005 (drawing no.) (mat'l spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly S/N 5156 and Motor Housing Assembly S/N 5786
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & In.) 4.905" Length overall (ft & in.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:

National National Part or Appurtenance Board No. Part or Appurtenance Board No.

Serial Number In Numerical Order Serial Number in Numerical Order (1 3259 N/A (26 I (2) (27 )

(3) (28 ) ______________________________________________________

(4) (29 ) _______________________________________________

(5) (30;I _________________________________________________________________

(6) (31)

(7) (32)

(8) (33)

(9) (34)

(10) (35)

(11) (36)

(12) (37)

(13) (38)

(14) (38)

(15) (40)

(16) (41)

(17) (42)

(18) (43)

(19) (44)

(20) (45)

I (21) ______________________________________________________________ (46)

(22) (47)

(23) (48)

(24) (49)

(25) I (50) _____________________________________________________

I1

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 CF (when applicable)
  • Supplemental Informaton in the form of lists, sketohes, or drawings may be used provided (1) size Is 8 ' x 11. (2) Information In Items 2 and 3 on this Data Report Is Included on each sheet, (3) each sheet Is numbered and the number cf the sheets Is recorded on this fcrm.

Form N-2 FORM N-2 (Back - Pg. 2 of_.

Certificate Holder' s Serial Nos. 3259 through 3259 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A.Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III. Division 1, NPT Certificate of Auth orization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, Date 10 ý/1- Name LCC Newinrgton Operations Signed L (NPT Certificate Holder) (authorized representative)

CERTIFICATE OF INSPECTION I.the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New Hampshire and employed by HSB CT / " /

of Hartford, CT have Inspected these Items described In this Data Report on end state that to the

. a__

best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code, Section I1I, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind arising from or connected with this Inspecpon.

Date Signed - - Commissions NH710 (Authorized Nuclear Inspector) (Nat'l. 8d. (incJ. endorsements) and state or prov. and no.)

From Page 1, Une 4 DRAWING DWG. IITEM ITEM MATERIAL MATERIAL TENSILE NO. "REV. NO. DESCRIPTION IDENT. SPECIFICATION (PSI)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA182 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21388 SA 182 F403-Mod 110,000 Code Case N-4-11 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SAl 82 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0341 SA213TYPE 316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. I of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of PIPT Certficate Holder)
2. Manufactured for Westinghouse Electric Co. LLC. 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back **See Back N/A 2005 (drawing no.) (madl spee. no.) (tensile strength) (CRN) (year built)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly S/N 5189 and Motor Housing Assembly S/N 5718
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft &In.) 4.905" Length overall (ft &In.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each item of this report:

Part or Appurtenance *National National Part or Appurtenance Board No. Part or Appurtenance Board No.

Serial Number in Numerical Order Serial Number in Numerical Order

  • (1) 3260 N/A (26 (2) (27 4 (3) (28 (4) (29 (5) (30, 4-(6) (31; (7) (32: i (8) (33)

(9) (34)

(10) (35) .4.

(11) (36)

(12) (37) .4.

(13) (38) 1-(14) (38)

(15) (40)

(16) (41)

(17) (42)

(18) (43)

(19) (44)

(20) (45)

(21) (46)

(22) .4.

(47)

(23) (48)

(24) (49)

(25) (50)

I

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 osi at temp. 60 °F (when applicable)

I Supplemental Information In the form of lists, sketches, or drawings may be used provided (1) size is 8 A x 11. (2) Information In Items 2 and 3 on this Data Report Is Included on each sheet. (3) each sheet Is numbered and the number of the sheets is recoded on this form.

Form N-2 FORM N-2 (Back - Pg. 2 of_?)

Certificate Holder' s Serial Nos. 3260 through 3260 CERTIFICATION OF DESIGN Design specifications certified by Donn M.Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A.Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code, Section II1,Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Date Name Westinghouse Electric Company, LCC New4ngton Operations Signed h ,l

/, '

/ --

(NPT Certilicate Holder) (authorized representative)

CERTIFICATE OF INSPECTION I,the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New Hampshire and employed by HSB CT_ d ,

of Hartford, CT have Inspected these Items described In this Data Report on anad state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance wih the ASME Code,Section III, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied. concerning the equipment described In this Data Report. Furthermore, neither the Inspector nor his e toyer shall be liable In any manner for any personal Injury or property damage or loss.

of any kind adspg from or connected il.sInspection Date iL+/-~ Signed(~..' eo-mmissions NH710 (Authorized Nuclear Inspector) (Nat'l. Bd. (ncl. endorsements) and state or prov. and no.)

  • From Page 1. Line 4 DRAWING DWG. IITEM ITEM MATERIAL MATERIAL TENSILE NO. I REV. NO. DESCRIPTION IDENT. SPECIFICATION (PSI)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA182 F348 70, 000 SA 182 F403-Mod SCEDM-163-112 07 2 Motor Housing MT21391 Code Case N-4-11 110,000 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA1 82 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0341 SA 213 TYPE 316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75,000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor. CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1. 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back **See Back N/A 2005 (drawing no.) (marl spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (Class) (Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly S/N 5183 and Motor Housing Assembly S/N 5783
8. Nom. thickness (in.) .240 Min. design thickness (In.) .167 D1a. ID (ft & In.) 4.905" Length overall (ft & in.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:

National National Part or Appurtenance Board No. Partor Appurtenance Board No.

Serial Number In Numerical Order Serial Number In Numerical Order (1) 3261 N/A (26) ,_______________________

(2) (27) __________________________

(3) (28.

(4) (29; (5) (30)

(6) (31)

(7) (32)

(8) (33)

(9) (34)

(10) (35)

(11) (36)

(12) (37)

(13) (38)

(14) (38)

(15) (40)

(16) (41)

(17) (42)

(18) (43)

+

(19)

+

(44)

(20) (45)

(21) (46)

(22) (47)

(23) (48)

(24) (49)

(25) (50)

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 osi at temp. 60 OF (when applicable)

' Supplemental Informaticn In the form of lists, sketches, ordrawings may be used provided (1) size Is 8 Y x 11. (2) Informaticn In Items 2 and 3 on this Data Repot Is Included on each sheet, (3) each sheet Is numbered and t;he number of the sheets is recorded on this fcrm.

Form N-2 FORM N-2 (Back - Pg. 2 of,.

Certificate Holder s Serial Nos. 3261 through 3261 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design ieport certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this (these) CEOM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1, NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company,

  • j /"

Date 16 17-.oJ'/,9S" Name LCC Newvington Operations Signed *

/ /(NPT Certificate Holder) (authorized representative)

CERTIFICATE OF INSPECTION U 1,the undersigned, holding a valid commission Issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of New Hampshire and employed by HSB CT e Z of Hartford, CT have Inspected these Items described In this Data Report on . , and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordanc with the ASME Code,Section III, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described in this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind arisingfrom* or connected wi ls Inspection/

Date Signed ons mmismlss NH71 0 (Authorized Nuclear Inspector) (Nat'l. 8d. (incl. endorsements) and state or prov. and no.)

  • From Page 1, Une 4 DRAWING DWG. ITEM ITEM MATERIAL MATERIAL TENSILE NO. REV. NO. DESCRIPTION IDENT. SPECIFICATION (PSI)

SCEDM-163-112 07 1 Upper End Fitting .04-0279 SA182 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21388 SA 182 F403-Mod 110, 000

____________ _________________ __________ Code Case N-4-11 SCEDM-163-112 07 .3 Lower End Fitting 04-0280 SA1 82 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0341 SA 213 TYPE 316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington. NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of Installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back **See Back N/A 2005 (drawing no.) (matl.spec. no.) (tensile strength) v (CRN) (year built)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Coda case no.)
6. Fabricated In accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly SIN 5165 and Motor Housing Assembly S/N 5716
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & In.) 4.905" Length overall (ft & In.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:

NaUonal National Part or Appurtenance Board No. Part or Appurtenance Board No.

Serial Number In Numerical Order Serial Number . In Numerical Order (1) 3262 N/A (26)

(2) (27)

(3) (28)

(4) (29)

(5) (30)

(6) (31)

(7) (32)

(8) (33)

(9) (34)

(10) (35)

(11) (36)

(12) (37)

(13) (38)

(14) (38) .

(15) " (40),

(16) (41),

(17) (42) ,

(18) (43) .

(19) (44) .

(20) (45)

(21) (46) ..

(22) (47) .

(23) (48) .

(24) (49) .

(25) (50)

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 osi at temp. 60 'F (when applicable)

"Supplemental Information In the form of lists, sketches, or drawings may be used provided (1) size Is 8 'A x11. (2) Information In Items 2 and 3 on this Data Report Is Included on each sheet, (3) each sheet is numbeed and the number of the sheets Is recorded on this form.

Form N-2 FORM N-2 (Back - Pg. 2 of 2)

Certificate Holder' s Serial Nos. 3262 through 3262 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson .P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, Date 0L, .*L/ ...." Name LCC Newington Operations Signed (NPT Certificate Holder) (authorized representative)

CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New Hampshire and employed by HSB CT.

of Hartford, CT have Inspected these Items described In this Data Report on . 'd *" , and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code,Section III, Division 1. Each part listed has been authorized for stamping on the dale shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concemlng the equipment described in this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind arising from or connected w)islnsPect,,J Date / S ommlssions NH71O (Authorized Nuclear Inspector) (Nat'l. Bd. (incl. endorsements) and state or prov. and no.)

From Page 1, Line 4 DRAWING jDWG. ITEM 1ITEM MATERIAL 1 MATERIAL 1TENSILE NO. j REV. NO. DESCRIPTION IDENT. SPECIFICATION (PSI)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 SAl 82 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21391 Code CA 182 Case N-4-11 F403-Mod 10 110,000 0 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SAl 82 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0341 SA 213 TYPE 316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinphouse Electric Co. LLC, 20 International Drive. Windsor. CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type "*See Back **See Back **See Back N/A 2005 (drawing no.) (marl spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly S/N 5170 and Motor Housing Assembly S/N 5762
8. Nom. thickness (In.) .240 Min. design thickness (in.) .167 Dia. ID (ft & In.) 4.905" Length overall (ft & In.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each item of this report:

National National Part or Appurtenance Board No. Part or Appurtenance Board No.

Serial Number in Numerical Order Serial Number in Numerical Order

)

.(1) 3263 N/A (26 (2) ) __________________________________________

(3) (28 (4) 1(27 (29 (5) (30:

(6) (31)

(7) (32)

(8) (33)

(9) (34)

(10) (35)

(11) (36)

(12) (37)

(13) (38)

(14) (38)

(15) (40)

(16) (41)

(17) (42)

(18) (43)

(19) (44)

(20) (45)

(21) (46)

+

(22) (47)

~1~

(23) (48)

(24) (49)

(25) (50)

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 cF (when applicable)
  • Supplemental Infcrmation In the form oflists, sketches, ordrawlngs may be used provided (1) size Is 8 ' x 11. (2) Information In items 2 and 3 on this Data Report Is Included on each sheet, (3) each sheet Is numbered and the number of the sheets Is recorded on this form.

Form N-2 FORM N-2 (Back - Pg. 2 of,.

Certificate Holder' s Serial Nos. 3263 through 3253 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

-Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, " ' t, /

Dae *,*._'"'*.**

/Name LCC Newington Operations _Pne Av."f/ a -. _,,_-*='*

DatNPee,*fcaeHodr Signed (authorized representative)

CERTIFICATE OF INSPECTION V, I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New Hampshire and employed by HSB CT of Hartford. CT have Inspected these Items described Inthis Data Report on . and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code, Section lIt.

Division 1. Each part listed has been authorized for stamping on the date shown above.

By.signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or loss of any kind arising from or connected with this In s-e.n.

Date Signed Commissions NH710 (Authorized Nuclear Irnspector) (Narl. 6d. (Qn.. endorsements) and state or prov. and no.)

  • From Page 1, Line 4 DRAWING jDWG. 1ITEM IITEM 1 MATERIAL MATERIAL TENSILE NO. REV. NO. DESCRIPTION IDENT. SPECIFICATION (PSI)

SCEDM-163-112 07 1 Upper End Fitting MT21476 SA182 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21388 SA 182 F403-Mod 110,000 Code Case N-4-11 SCEDM-163-112 07 3 Lower End Fitting MT21474 SA1 82 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting MT21404 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0341 SA 213 TYPE 316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of Installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back **See Back N/A 2005 (drawing no.) (marl spec. no.) (lensile strength) (CRN) (year built)
5. ASME Code, Section Il, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly S/N 5164 and Motor Housing Assembly SIN 5773
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & In.) 4.905" Length overall (ft & in.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:

Part orAppurtenance National National Part or Appurtenance" Board No. Part or Appurtenance Board No.

Serial Number In Numerical Order Serial Number in Numerical Order 0(1) 3264 N/A . (26 (2) (27 3)

(3) T 1 (28 (4) I I (29 3)

(5) (30

.4 (6) (31 (7) (32)

(8) (331 (9) (34)

(10) (35)

(11) (36)

(12) (37)

(13) (38)

(14) (38)

(15) (40)

I.

(16) (41)

(17) (42)

(18) (43)

(19) (44)

.4 (20) (45)

(21) (46)

(22) (47)

(23) (48)

(24) (49)

(25) (50)

I

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 OF (when applicable)
  • Supplemental Information In the formhof lists, sketches, ordrawings may be used provided (1) size Is 8 Y 2x 11. (2) Information In items 2 and 3 on this Data Report Is Included on each sheet. (3) each sheet Is numbered and the number of the sheets Is recorded on this form.

Form N-2 FORM N-2 (Back - Pg. 2 of:Z Certificate Holder's Serial Nos. 3264 _through 3264 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

L 4 CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of"the ASME Code, Section II1,Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Date /OI& Name Westinghouse Electric Company, LCC Newington Operations (NPT Certificate Holder)

Signed h /0,U,--,

- (authorized representative)

CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Bolter and Pressure Vessel Inspectors and the State or Province of New Hampshire and employed by HSB CT 'd of Hartford, CT have Inspected these Items described In this Data Report on , and state that to the best of my knowledge and belief, the Certilicate Holder has fabricated these parts or appurtenances In accordance with the ASME Code. Section I11, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate. neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind rising r . or connected> this nspc In.

Date Signed . Commissions NH710 (Authorized Nuctear Inspector) (Nat'l. Bd. (incl. endorsements) and state or prov. and no.)

"From Page 1, Une 4 DRAWING DWG. I ITEM ITEM MATERIAL MATERIAL TENSILE NO. REV. NO. DESCRIPTION IDENT. SPECIFICATION (PSI)

SCEDM-163-112 07 1 Upper End Fitting 05-0611 SA182 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21388 SA 182 F403-Mod 110, 000 Code Case N-4-11 SCEDM-163-112 07 3 Lower End Fitting 05-0346 SA182 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0341 SA 213 TYPE 316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name end address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back -See Back N/A 2005 (drawing no.) (mat'l spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (edijtion) (addenda date) (class) (Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEOM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly SIN 5169 and Motor Housing Assembly SIN 5774
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & in.) 4.905" Length overall (ft & In.) 214.8'
9. When applicable. Certificate Holders' Data Reports are attached for each Item of this report:

I j

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 osi at temp. 60 OF (when applicable)

I Supplemental Inibrmaticn In the form of lists, sketches, or drawings may be used provided (1) size Is 8 Y x 11. (2) Information In Items 2 and 3 on this Data Report Is Included on each sheet. (3) each sheet Is numbered and the number of the sheets Is recorded on this form.

Form N-2 FORM N-2 (Back - Pg. 2 of_2)

Certificate Holder s Serial Nos. 3265 through 3265 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A.Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, ,AI~

Date Name LCC Newington Operations Signed b (ciz-(NPT Certificate Holder) (authorized representative)

CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Bofier and Pressure Vessel Inspeztors and the State or Province of New Hampshire and employed by HSB CT I 7

of Hartford, CT have Inspected these Items described In this Data Report on /C_/ ' and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code,Section III, Division 1. Each part listed has been authorized for stamping on the date shown above.

Syslgning this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described in this Data Report Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind arising froh or connected t this Inspe .

Date Si (nned A CoIn s. NH71o eseons (Authorized Nuclear Inspector) (Nat'l. Bd. (Incl. endorsements) and state or prov. and no.)

  • From Page 1, Une 4 DRAWING jDWG. 1ITEM ITEM MATERIAL MATERIAL TENSILE NO. . REV. NO. -DESCRIPTION [DENT. J SPECIFICATION (PSI)

SCEDM-163-112 07 1 Upper End Fitting 05-0611 SA182 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21388 SA 182 F403-Mod 110, 000

_____________ ____________Code Case N-4-11 _____

SCEDM-163-112 07 3 Lower End Fitting 05-0346 SA1 82 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting MT21404 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0341 SA 213 TYPE 316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back **See Back N/A 2005 (drawing no.) (matI spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated in accordance vith Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly SIN 5173 and Motor Housing Assembly S/N 5775
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dfa. ID (ft & In.) 4.905' Length overall (ft &in.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:

National National Part or Appurtenance Board No. Part or Appurtenance Board No.

Serial Number. In Numerical Order Serial Number In Numerical Order

.(1) 3266 N/A (26)

(2) (27),

.(3) (28) ..

(4) (29)

(5) (30)

(6) (31)

(7) (32) .

(8) (33)

(9) (34)

(10) (35)

(11) (36)

(12) (37)

(13) ,, (38).

(14) (38)

(15) (40)

(16) (41)

(17) (42)

(18) (43)

(19) (44)

(20) (45)

(21) (46)

(22) (47)

(23) (48)

(24) (49)

(25) (50)

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 osi at temp. 60 OF (when applicable)

Supplemental Information in the form of lists, sketches, or drawings may be used provided (1) size Is8 ' x 11. (2) Information In items 2 and 3 on this Data Report Is Included on each sheet, (3) each sheet Is numbered and the number of the sheets is recor-ed on this form.

Form N-2 FORM N-2 (Back - Pg. 2 of_2 Certfircate Holder' s Serial Nos. 3266 through 3266 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and that this (these) CEOM Pressure Housing Assembly conforms to the rules or construction of the ASME Code, Section IIl, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company.

Date / d0 r -o " Name LCC Newington Operations Signed

/ (NPT Certilicate Holder) (authorized representative)

CERTIFICATE OF INSPECTION I.the undersigned, holding a valid commission Issued by the National Board of Boier and Pressure Vessel Inspectors and the State or Province and employed by HSB CT / .

of New Hampshire of Hartford. CT have Inspected these Items described In this Data Report on /. . and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code,Section III, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind arlsln from or connected wls lnspe*,,*n.

Date . Slpned - Commissions NH710 (Authorized Nuclear Inspector) (Narl. Bd. (Incl. endorsements) and state or prov. and no.)

  • From Page 1, Line 4 DRAWING j DWG. 1 ITEM ITEM MATERIAL MATERIAL TENSILE NO. J REV.* NO. DESCRIPTION IDENT. SPECIFICATION (PSI)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA182 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21388 SA182 F403-Mod 110,000 Code Case N-4-11 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA182 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting MT21404 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0341 SA213 TYPE 316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. I of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and addressof NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1,1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type "*SeeBack **See Back "*SeeBack N/A 2005 (drawing no.) (marl spec. no.) .(tensile strength) (CRN) (year built)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date NIA (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly SIN 5150 and Motor Housing Assembly SIN 5778
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & In.) 4.905" Length overall (ft & In.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:

National Part or Appurtenance Board No.

Serial Number. In Numerical Order

-(1) 3267 N/A (2

I.

(3 (4)

(5:

(6)I ______________ _____________

(7)

(8)

(9)

(10)

(11)

(12)

(13)

(14)

(15)

(16)

(17)

(18)

(19)

(20)

(21)

(22)

(23)

(24)

(25)

10. Design pressure 2500 psi, Temp. 650 OF. Hydro. test pressure 3125 osl at temp. 60 OF (when applicable)
  • Supplemental Information Inthe form of lists, sketches, or drawings may be used provided (1) size Is 8 %x 11. (2) Information In Items 2 and 3 on this Data Report Is Included on each sheet, (3) each sheet is numbered and the number of the sheets Is recorded on this form.

Form N-2 FORM N-2 (Back - Pg. 2 of 2)

Certificate Holder' s Serial Nos. 3267 through 3267 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code, Section I1,Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, Date 0 Name LCC Newinglon Operations Signed (NPT Certifcate Holder) , / (authorized representative)

CERTIFICATE OF INSPECTION U.

I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New Hampshire and employed by HS8 CT ., Of of Hartford, CT have Inspected these Items described in this Data Report on ,_,_-._-.__,_" , and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code,Section III, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described In this Data Report. Furthermore. neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind arising fro or connected hisn::Ud Date 2- Signed . . Commissions f .NH710 (Authorized Nuclear Inspector) (Narl. 8d. (Ind. endorsements) and state or prov. and no.)

  • From Page 1, Une 4 DRAWING , DWG. 1 ITEM ITEM MATERIAL MATERIAL TENSILE NO. REV. NO. DESCRIPTION IDENT. SPECIFICATION (PSI)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA182 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21388 SAC 182 F403-Mod 1 10, 00

____________ _____ ___________Code Case NA-l4-11 ___

SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA182 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0341 SA 213 TYPE 316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor. CT 06095-0500 (name and address of purchaser)
3. Location of Installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back **See Back N/A 2005 (drawing no.) (matl spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code, Section I11,Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated in accordance wfth Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly S/N 5192 and Motor Housing Assembly SIN 5780
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & in.) 4.905" Length overall (ft & in.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each item of this report:

National National Part or Appurtenance Board No. Part or Appurtenance Board No.

Serial Number in Numerical Order Serial Number In Numerical Order (1) 3268 N/A (26 (2) (27 (3) (28 (4) (29 (5) (30 +

(6) (31:

4-(7) (32)

(8) (33)

(9) (34)

(10) (35)

(11) (36)

(12) (37)

(13) (38)

+

(14) (38) 4-(15) (40) 4.

(16) (41)

(17) (42)

.4.

(18) (43)

+

(19) (44) 4-(20) (45)

I (21) (46)

(22) (47)

(23) (48)

(24) (49)

(25) (50)

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 OF (when applicable)
  • Supplemental informaton In the form of lists, sketches, or drawings may be used provided (1) size Is 8 Y: x 11. (2) Information In Items 2 and 3 on this Data Report Is Included on each sheet, (3) each sheet Is numbered and the number of the sheets is recorned on this form.

Form N.2 FORM N-2 (Back - Pg. 2 of,.2 Certificate Holder' s Serial Nos. 3268 through 3268 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A.Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, P" Date /,P Z2& , Name LCC NeWvngton Operations Signed *

(NPT Certificate Holder) (authorized representative)

CERTIFICATE OF INSPECTION I, the undersigned;'holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New Hampshire and employed by HSB CT I of Hartford, CT have Inspected these Items described in this Data Report on 0 , and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code, Section Ill.

Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kInd arising fioT or connected tý this Inspe 2U!

Date O Signed 6-4A.ý7-.Gomm (Authorized Nuclear Inspector) issions NH710 (Nat'l. Bd. (Incl. endorsements) and state or prov. and no.)

  • From Page 1, Une 4 DRAWING - DWG. ITEM ITEM I MATERIAL j MATERIAL - TENSILE NO. J REV. NO. DESCRIPTION IDENT. SPECIFICATION (PSI)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA1 82 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21388 Code SA 182 Case N-4-11 F403-Mod 10 110,000 0 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA182 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0340 SA 213 TYPE 316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC. 74 Old Dover Road. Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095.0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back -See Back -See Back N/A 2005 (drawing no.) (mad' spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code.Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date NIA (no.)
7. Remarks: CEOM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly SIN 5161 and Motor Housing Assembly SIN 5224
8. Nom. thickness (in.) .240 Min, design thickness (in.) .167 Dia. ID (ft & in.) 4.905" Length overall (ft & In.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:

National National Part or Appurtenance Board No. Part or Appurtenance Board No.

Serial Number In Numerical Order Serial Number in Numerical Order

)

(1) 3269 N/A (26 (2) (27 ) _________________________________________________________

  • (3) (28)) ___________

(4) (29)

(5) (30)

(6) (31)

(7) (32)

(8) (33)

(9) (34)

(11) (35)

(36)

(12) (37)

(13) (38)

(14) (38)

(15) _______________________ (40)

(41)

(17) (42)

(18)_________________________ (43)

(19) ___________

(44)

(20) (45)

(21) (46)

(22) (47)

(23) (48)

(24) (49)

(25) (50)

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 OF (when applfcable)
  • Supplemental Information In the form of lists, sketches, or drawings may be used provided (1) size Is 8 X,x 11. (2) Information In items 2 and 3 on this Data Report Is Included on each sheet. (3) each sheet Is numbered and the number of the sheets Is recorded on this form.

Form N-2 FORM N-2 (Back - Pg. 2 ofj2)

Certificate Holder' s Serial Nos. 3269 through 3269 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report cert iried by J. A.Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and that this (these) CEDM Pressure Housing Assembly ASME Code, Section II1.Division 1.

conforms to the rules of construction of the NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, .1 .

Date /O/2./lOZ J Name LCC Newlngton Operations Signed /0 a ,

(NPT Certificate Holder) '(authorized representative)

CERTIFICATE OF INSPECTION I. the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New Hampshire and employed by HSB CT , ,

of Hartford. CT have Inspected these Items described In this Data Report on /'-/-, ,and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code. Section I1t, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or loss.

of any kind arising fn or conne this n.

Date .*.nec!i!C S ipned;n*/ Commissions NH710 (Nat'l. d. (incl. endorsements) and state or prov. and no.)

(Authorized Nuclear Inspector)

  • From Page 1, Line 4

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington. NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back **See Back N/A 2005 (drawing no.) (mail spec. no.) (tensile strength) (CRN4) (year built)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated in accordance with Const. Spec. (Diy. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housino Assembly S/N 5171 and Motor Housing Assembly S/N 5231
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & in.) 4.905" Length overall (ft & in.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each item of this report:

National Part or Appurteriance Board No.

Serial Number

  • In Numerical Order (26 ))

(27 )

(28 (29 (30) .4.

(31)

+

(32)

(33)

(34)

(35)

(36)

(37)

(38)

(38)

(40)

(41)

(42)

(43)

(44)

(45)

(46)

(47)

(48)

(49)

(50)

10. Design pressure 2500 psi, Temp. 650 °F, Hydro. test pressure 3125 osi at temp. 60 'F (when applicable)

Supplemental Information In the form of lists, sketches, or drawlngs may be used provAded (1) size is 8 % x 11. (2) Informaticn In items 2 and 3 on this Data Report Is Included on each sheet, (3) each sheet Is numbered and the number cf the sheets Is r:orded on this form.

Form N-2 FORM N-2 (Back- Pg. 2 of_2 Certificate Holder' s Serial Nos. 3270 through 3270 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and that this (these) CEOM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, Date /VZ26 Name LCC Newington Operations Signed

/ /(NPT Certificate Holder) (authorized representative)

CERTIFICATE OF INSPECTION 1,the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New Hampshire and employed by HSB CT of Hartford. CT have Inspected these Items described in this Data Report on . "/'16/e'." , and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code,Section III, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, conceming the equipment described In this.Data Report. Furthermore. neither the Inspector nor his employer shall be liable In any manner for any personal Injury orproperty damage or loss of any kind arising from or connected W this Inspecti.

a f Date Signed , Commissions NH710 (Authorized Nuclear Inspector) (Natl. 8d. (Incl. endorsements) and state or prov. and no.)

From Page 1, Urne 4 DRAWING DWG. ITEM ITEM MATERIAL MATERIAL TENSILE NO. j REV. NO. DESCRIPTION IDENT. SPECIFICATION (PSI1)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA182 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21403 SA 182 F403-Mod Code Case N-4-11 110, 000 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA182 F348 70,000 SCEDM-163-102 08 1 Upper End Fitting MT21404 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0341 SA213 TYPE 316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **SeeBack **See Back N/A 2005 (drawing no.) (mail spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated In accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housina Assembly consistino of Uooer Pressure Housino Assembly S/N 5209 and Motor Housina Assemblv S/IN 5702
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & In.) 4.905" Length overall (ft & In.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:

National National Part or Appurtenance Board No. Part or Appurtenance Board No.

Serial Number In Numerical Order Serial Number In Numerical Order (1 3271 N/A (26

)_________________________

(2 (27 )

.(3 ) ._______________________________ (28 (4 (29 (5; (30 (6) (31; (7) (32; (8) (33)

(9) (34)

(10) (35) 4 (11) (36)

(12) (37)

(13) (38)

(14) (38)

(15) (40)

(16) (41)

(17) (42)

(16) (43)

(19) (44)

(20) (45)

(21) (46)

(22) (47)

(23) (48)

(24) (49)

(25) (50)

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 'F (Nhen applicable)
  • Supplemental Info.rmation In the form ofllsts, sketches, or drawings may be used provided (1) s~ze Is 8 Y: x 11. (2) Informaticn In items 2 and 3 on this Data Report Is Included on each sheet, (3) eac'h sheet Is numbered and the number of the sheets Is recorded on this form.

Form N-2 FORM N-2 (Back - Pg. 2 of_2)

Certificate Holder' s Serial Nos. 3271 through 3271 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030

  • (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code, Section iI1,Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, Date /t4ý Name LCC Newington Operations Signed INKT Certificate Holder) (authorized representative)

CERTIFICATE OF INSPECTION ý1/

I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New Hampshire and employed by HSB CT I of Hartford, CT have Inspected these items described In this Data Report on ,/2-./a ' and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code,Section III, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described In this Data Report. Furthermore, neither the inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind arising from or connectedpectjprt Date " Signed Commissions NH710 (Authorized Nuclear Inspector) (Nat'l. Bd. (incl. endorsements) and state or prov. and no.)

  • From Page 1, Une4 DRAWING DWG. ITEM jITEM MATERIAL J MATERIAL TENSILE NO. NO. IREV. DESCRIPTION IDENT. SPECIFICATION (PSI)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA182 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21391 SA 182 F403-Mod 110, 000

___________Code Case N-4-11 _____

SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA182 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0340 SA 213 TYPE 316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75,000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of _

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certiflcate Holder)
2. Manufactured for Westinghouse Electric Co. LLC. 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back **See Back N/A 2005 (drawing no.) (marl spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly S/N 5168 and Motor Housing Assembly S/N 5706
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & in.) 4.905* Length overall (ft &In.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each item of this report:

National

  • National Part or Appurtenance Board No. Part or Appurtenance Board No.

Serial Number In Numerical Order Serial Number In Numerical Order (1) 3272 N/A (26 (2) (27 (3) .. (28

"(4)___________I (29 (5) (30; 4 (6) (31)

  • 1~

(7) (32)I.

(8) (33)

(9) (34) 4.

(10) (35)

(11) (36)

(12) (37)

(13) (38) 4 (14) (38)

(15) ___________

(40)

.t.

(16) (41)

(17) (42)

(18) _____________

(43)

(19) ________________________

(44)

(20) (45)

(21) (46)

(22) (47)

(23) (48)

(24) (49)

(25) (50)

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 OF (when applicable)
  • Supplemental Infornabon In the form of lists, sketches, or drawings may be used provided (1)size Is8 %x 11. (2) Information in Items 2 and 3 on this Data Report, Is Included on each sheet, (3) each sheet Is numbered and the n'mber of the sheets is recorded on this form.

Form N-2 FORM N-2 (Back - Pg. 2 of_21 Certificate Holder' s Serial Nos. 3272 through 3272 CERTIFICATION OF DESIGN

[Design specifications certified by Donn M. Matteson -P.E. State -CT Reg. no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable).

CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20. 2008 Westinghouse Electric Company, Date 1401_41o,5" Name LCC Nevington Operations Signed a ,-, -

/ . (NPT Certificate Holder) el (authorzed representative)

CERTIFICATE OF INSPECTION I.the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New Hampshire and employed by HSB CT of Hartford. CT have Inspected these Items described In this Data Report on .___._____._______ , and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code. Section I11, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind arising from or connected with this Inspect.

Date .. Silned

  • Commissions NH710 (Authorized Nuclear Inspector) (Nat'l Bd. (Incl. endorsements) and state or prov. and no.)

From Page 1, Une 4 DRAWING DWG. I ITEM ITEM MATERIAL MATERIAL TENSILE NO. REV. -NO. DESCRIPTION IDENT. SPECIFICATION (PSI)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA182 F348 70,000 SCEDM-163-112 07 2 Motor Housing MT21391 Code SA 182 Case N-4-11 F403-Mod 10 110,000 0 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA182 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting MT21404 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0341 SA 213 TYPE 316 75, 000 SCEDM-163-102 08 '3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back **See Back N/A 2005 (drawing no.) (mat'l spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code, Section Ill, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly SIN 5179 and Motor Housing

.Assembly S/N 5719

8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & In.) 4.905" Length overall (ft & In.) 214.8*
9. When applicable, Certificate Holders' Data Reports are attached for each item of this report:

National Part or Appurtenance Board No.

Serial Number in Numerical Order 3)

(26 (27 ) ______________________________________________

(28 ) ______________________________________________

(29 ) _______________________________________________

(30 ) ____________________________________________________

(31 (32)

(33)

(34)

(35)

(36)

(37)

(38)

(38)

(40)

(41)

(42)

(43)

(44)

(45)

(46)

(47)

(48)

(49)

(50)

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 CF (when applicable)
  • Supp!emental Information in the form of lists, sketches, crdrawings may be used provided (1) size Is 8 V.x 11. (2) Information In items 2 and 3 on this Data Report Is include. on each sheet, (3) each sheet is numbered and the number of the sheets Is recorded on this form.

Form N-2 FORM N-2 (Back - Pg. 2 of2J)

Certificate Holder' s Serial Nos. 3273 through 3273 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certifled by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authorization No. N-2041.. Expires February 20, 2008 Date / 2 5' " Name Westinghouse Electric Company, LCC Newington Operations Signed

( A1 (NPT Certilicate Holder) (authorized representative)

CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of New Hampshire and employed by HSB CT of Hartford. CT have Inspected these Items described In this Data Report on 7d/z-", 'p and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code, Section lIt, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described In this Data Report Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal injury or property damage or loss of any kind ad ing fr or connected with thi Inspect am Date * */ Sipned .'- 'ommisslons NH710 (Authorized Nuclear Inspector) (Nat'l. Bd. (Incl. endorsements) and state or prov. and no.)

From Page 1, Une 4 DRAWING DWG. ITEM ITEM MATERIAL MATERIAL TENSILE NO. REV. , NO. DESCRIPTION IDENT. SPECIFICATION (PSI)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA1 82 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21391 SAC182 Code CaseF403-Mod N-4-11 110, 000 SCEDM-163-112 07 3 Lower.End. Fitting 04-0280 SAl 82 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971.. SA 479 TYPE 316 75,000 SCEDM-163-102 08 2 Tube 04-0341 SA 213 TYPE 316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type "*See Back "*SeeBack -See Back N/A 2005 (drawing no.) (mat'l spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly S/N 5176 and Motor Housing Assembly S/N 5723
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & in.) 4.905" Length overall (ft & In.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each item of this report:

National National Part or Appurtenance Board No. Part or Appurtenance Board No.

Serial Number In Numerical Order Serial Number in Numerical Order (1

3)

I 3274 N/A (26 (2 ) ______________________________________________________

(27 ) ______________________________________________

(3.) ______________________________________________________________ (28 ) __________________________________________

(4;) (29 ) ____________________________________________________

(5) (30 ) ____________________________________________________________

(6) (31; (7) (32;1 __________________________________________________________________________

(8) (33)

(9) (34)

(10) (35)

(11) (36)

(12) (37)

(13) (38)

(14) (38)

(15) (40)

(16) (41)

(17) (42)

(18) (43)

(19) (44)

(20) (45)

(21)

(22)

(23)

_____________________________ 1:____________________________

(46)

(47)

(48)

(24) (49)

-1 (25) (50)

I

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 OF (when applicable)

' Supplemental Information Inthe form ofllsts, sketches, ordrawlngs may be used provided (1) size Is 8 ' x 11. (2) Informaticn n items 2 ard 3 on thfIs Data Report Is Included on ea:h sheet, (3) each sheet Is numbered and the number of the sheaes Is recorded on this form.

Form N-2 FORM N-2 (Back - Pg. 2 of,2)

Certificate Holder' s Serial Nos. 3274 through 3274 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, A (Y Date /aName LCC Newington Opera tions Signed ~4-----

ay(

(NPT Certificate Holder) .. - (authorized representative)

CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New Hampshire and employed by HSB CT / /

of Hartford, CT have Inspected these Items described In this Data Report on __________-_" , and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code, Section II1, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described in this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind arising fr m or connected wA. this Inspeci."

Date Signed __ _---Commissions NH710 (Authorized Nuclear Inspector) (Nat'l. Bd. (Incl. endorsements) and state orprov. and no.)

"From Page 1, Une 4 DRAWING 1DWG. ITEM jITEM MATERIAL MATERIAL TENSILE NO. REV. NO. DESCRIPTION IDENT. SPECIFICATION (PSI)

SCEDM-163-112 07. 1 Upper End Fitting 04-0279 SA182 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21391 SA 182 1410M01 Code Case N-40-1 110,000 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA182 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0341 SA 213 TYPE 316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington. NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back -See Back -See Back N/A 2005 (drawing no.) (mat'l spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code, Section Ill, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated In accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly SIN 5157 and Motor Housing Assembly S/N 5724
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & in.) 4.905" Length overall (ft & in.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:

National National Part or Appurtenance Board No. Part or Appurtenance Board No.

Serial Number In Numerical Order Serial Number In Numerical Order (1) 3275 N/A * (26)

(2) (27)

(3) (28)

(4) (29)

(5) (30)

(6) (31)

(7) (32)

(8) (33)

(9) (34)

(10) (35)

(11) (36)

(12) ,, (37)

(13) (38)

(14) (38)

(15) (40)

(16) (41)

(17) ._(42)

(18) (43)

(19) (44)

(20) (45)

(21) . (46)

(22) (47)

(23) . (48)

(24) . (49)

(25) ._(50)

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 OF (when applicable)

Supplemental information In the form of lists, sketches, or drawings may be used provided (1) size Is B '2 x 11. (2) infzrrnatidn In Items 2 and 3 on this Data Report Is included on each sheet, (3) each sheet Is numbered and the number of 124e sheets Is recorded on this form.

Form N-2 FORM N-2 (Back - Pg. 2 of_2 Certificate Holder' s Serial Nos. 3275 through 3275 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Date 401.:2 I

O..5l Name Westinghouse Electric Company, LCC Newington Operations (NPT Certificate Holder)

Signed h (authorized representative)

CERTIFICATE OF INSPECTION I. the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province and employed by HSB CT 1 ,,.

of New Hampshire of Hartford. CT have inspected these Items described in this Data Report on /O/10.1*4/5- . and state that to the best of my knowdedge and belief, the Certificate Holder has fabricated these paris or appurtenances In accordance with the ASME Code,Section III, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or loss of any kind arising from or connected wttthlsInspeth tiop*

Date LNal. Signed. 'n. Commissions NH710 nosets (Authonized Nuclear inspector) (Nat'l. Bd. (incl. endorsements) and state or prov. and no.)

  • From Page 1, Une 4 DRAWING DWG. ITEM 1ITEM IMATERIAL 1 MATERIAL TENSILE NO. REV. NO. .DESCRIPTION IDENT. SPECIFICATION . (PSI)

SCEDM-163-112 '07 1 Upper End Fitting 04-0279 SA182 F348 70, 000 Moo osngM231 SA 182 F403-Mod SCEDM-163-112 07 2 Motor Housing MT21391 Code Case N-4-1 110, 000 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA1 82 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0341 SA 213 TYPE 316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75,000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certfied by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC. 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back "*See Back **See Back N/A 2005 (drawing no.) (marl spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code, Section 11, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly SIN 5193 and Motor Housing Assembly S/N 5725
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & In.) 4.905* Length overall (ft & In.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:

National National Part or Appurtenance Board No. Part or Appu rtenance Board No.

Serial Number In Numerical Order Serial Nu mber In Numerical Order

)

(1I) 3276 N/A (26 (2 ) __________________________________________________ (27 ) _________________________________________________________

(3) ____ ____

(28 (4) ___________ I ___________ (29.

(5 (30:

(6 (31)

(7Q (32)

(8) (33)

(9) (34)

(10) (35)

(11) (36)

(12) (37)

(13) (38)

(14) (38)

(15) (40)

(16) (41)

(17) (42)

(18) (43)

(19) (44)

(20) (45)

(21) (46)

(22) (47)

(23) (48)

(24) (49)

(25) (50)

10. Design pressure 2500 psi, Temp. 650 CF, Hydro. test pressure 3125 psi at temp. 60 'F (when applicable)
  • Supplemental Information In the form of'lists, sketches, or drawings may be used provided (1) size Is 8 A x 11. (2) Information In Items 2 and 3 on this Data Report Is included on each sheet, (3) each sheet Is numbered and the number of the sheets Is recorded on this form.

Form N-2 FORM N-2 (Back - Pg. 2 of_2

. Certificate Holder' s Serial Nos. 3276 through 3276 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, Date /, Name LCC Newington Operations Signed (NPT Certificate Holder) (authorized representative)

CERTIFICATE OF INSPECTION I. the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New Hampshire and employed by HSB CT of Hartford. CT have inspected these Items described in this Data Report on 'e ,,!O"- ,and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code,Section III, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind arising frm or connected with this inspecn.

Date , 2

  • Siprned 41 :_"09L '

(Authorized Nuclear Inspector)

Commissions NH710 (Nat'l. Bd. (incl. endorsements) and state or prov. and no.)

From Page 1, Line 4 DRAWING DWG. .-ITEM 1ITEM MATERIAL MATERIAL jTENSILE NO. REV. NO. DESCRIPTION IDENT. SPECIFICATION , (PSI)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA182 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21391 SA 182 F403-Mod 110, 000

__________________CodeCaseN-4-11 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA182 F348 70, 000 SCEDM-1 63-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0340 SA 213TYPE 316 75, 000 SCEDM-1 63-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC. 74 Old Dover Road. Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type -See Back **See Back "See Back N/A 2Q05 (drawing no.) (madl spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly S/N 5163 and Motor Housing Assembly S/N 5782
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & In.) 4.905" Length overall (ft & in.) 214.8"
9. When applicable, tertificate Holders' Data Reports are attached for each Item of this report:

Part or Appurtenance National National Part or Appurtenance Board No. Part or Appurtenance Board No.

Serial Number In Numerical Order Serial Number In Numerical Order (1) 3277 N/A (26 )

(2) (27 (28 (3) + (29)

(4)

(5) (30 4 (6) (31;

.4.

(7) (32:

+

(8) (33; I.

(9) (34) 4.

(10) (35)

(11) (36)

(12) (37) -4 (13) (38) 4 (14) (38)

(15) (4,0)

(16) (41)

(17) (42)

(18) (43)

(19) (44)

(20) (45)

(21) (46)

(22) (47)

(23) (48)

(24) (49)

(25) (50)

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 CF (when applicable)
  • Supplemental Informiation In he form of lists, sketches, or drawings may be used provided (1) s!ze Is 8 2 x 11. (2) Information in items 2 and 3 on this Data Report is Included on each sheet, (3) each sheet Is numbered and the number of the sheets Is recorded on this form.

Form N-2 FORM N-2 (Back - Pg. 2 of_2 Certificate Holder s Serial Nos. 3277 through 3277 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and that this (these) CEOM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, Date / Z. ._' Name LCC Newington Operations Signed (NPT Certificate Holder) (authorized representative)

CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New Hampshire and employed by HSB CT / /

of Hartford, CT have Inspected these Items described In this Data Report on and state that to the

  • 1/44/O" best of my knowledge and bellef, the Certiricate Holder has fabricated these parts or appurtenances In accordance with the ASME Code,Section III.

Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described In this. Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind ar1ng/7n or connected Date Signed .immssslons NH710 (Authorized Nuclear Inspector) (Nati. Bd. (incl. endorsements) and state or prov. and no.)

From Page 1, Une 4 DRAWING DWG. ITEM ITEM MATERIAL MATERIAL TENSILE NO. REV. NO. DESCRIPTION IDENT. SPECIFICATION (PSI)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA182 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21388 SA 182 F403-Mod 110, 000

_____________ ____ __________________ ___________ Code Case N-4-11 ______

SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA182 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0341 SA 213 TYPE 316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back **See Back N/A 2005 (drawing no.) (matl spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly S/N 5198 and Motor Housing Assembly SIN 5765
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & in.) 4.905" Length overall (ft & In.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each item of this report:

National National Part or Appurtenance Board No. Part or Appurtenance Board No.

Serial Number In Numerical Order Serial Number in Numerical Order (1) 3279 N/A (26 ) ____________________________________________________

(2) (27 ) ______________________________________________

(3) (28 ) ______________________________________________

(4) (29 ) ______________________________________________________

(5) (30 (6) (31; (7) (32)

(8) (33)

(9) (34)

(10) (35)

(11) (36)

(12) (37)

(13) (38)

(14) (38)

(15) (40)

(16) (41) 4 (17) (42)

(18) +

(43)

(19) (44)

(20) (45)

(21) (46)

(22) (47)

(23) (48)

(24) (49)

(25) (50)

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 OF (when applicab:l)
  • Supplemental Information In the fonr of lists, sketches, or drawings may be used provided (1) size Is 8 'Y4x 11. (2) Informaticn in Items 2 and 3 on this Data Report is Included on each sheet, (3) each sheet Is numbered and the number of the sheets Is recoded on this form.

Form N-2 FORM N.2 (Back - Pg. 2 of,,)

Certificate Holdere s Serial Nos. 3279 through 3279 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State CT Reg, no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made In this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NFT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, Date /1 1:2 /R:-:C Name LCCNewington Operations Signed (NPT Certificate Holder) (authorized representative)

CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New Hampshire and employed by HSB CT of Hartford CT have Inspected these items described In this Data Report on ,/ ,/7!/;* ,and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code,Section III.

Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes anyvwarranty. expressed or Implied, concerning the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind arising f m or connected this I on.

Date C41 744 SIP~ned .~Commissions NH710 (Authorized Nuclear Inspector) (Nat'l. ed. (Incl. endorsements) and state or prov. and no.)

From Page 1, Line 4 DRAWING , DWG. ITEM , ITEM MATERIAL MATERIAL TENSILE NO. REV. NO. DESCRIPTION IDENT. SPECIFICATION (PSI)

SCEDM-163-112 07 1 Upper End Fitting 05-0611 SAl 82 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21388 Code SA 182 Case N-4-11 F403-Mod 10 110,000 0 SCEDM-163-112 07 3 Lower End Fitting 05-0346 SA182 F348 70. 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 3i6 75 000 SCEDM-163-102 08 2 Tube 04-0340 SA 213 TYPE 316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. I of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC. 74 Old Dover Road, Newington, NH 03801 (name and address of NPT certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back *'See Back N/A 2005 (drawing no.) (matrl spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly SIN 5180 and Motor Housing Assembly S/N 5768
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 . Dia. ID (ft &In.) 4.905" Length overall (ft & In.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:
10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 CF (when applicable)

Supplemental information in the form of lists, sketches, or drawings may be used provided (1) s3ze Is 8 'A x 11. (2) information In items 2 and 3 on this Data Report Is included on each sheet, (3) each sheet Is numbered end the number of the sheets Is reccrded on this fcrm.

Form N-2 FORM N-2 (Back - Pg. 2 of 2)

Certificate Holder' s Serial Nos. 3280 through 3280 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. Slate CT Reg. no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and that this (these) CEOM Pressure Housing Assembly conforms to the rules of construction or the ASME Code,Section III, Division 1, NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, iged Date Name LCC Newington Operations Signed (NPT Certificate Holder) (authorized representative)

CERTIFICATE OF INSPECTION I,the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New Hampshire and employed by HSB CT / P of Hartford, CT have Inspected these Items described In this Data Report on ,*!7e* " , and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances in accordance with the ASME Code,Section III, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind adsg from or connected with this Ins M

Date Sine Commissions NH7I (Authorized Nuclear Inspector) (Nat'l. Bd. (incl. endorsements) and state or prov. and no.)

From Page 1, Line 4 DRAWING JDW G. ITEM ITEM MATERIAL MATERIAL TENSILE NO. REV. NO. DESCRIPTION IDENT. SPECIFICATION (PSI)

SCEDM-163-112 07 1 Upper End Fitting 05-0611 SA182 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21388 Code SA 182 Case N-4-11 F403-Mod 10 110,000 0 SCEDM-163-112 07 3 Lower End Fitting 05-0346 SA182 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0341 SA 213 TYPE 316 75, 000 SCEDMo163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, (nameLusby MD 20657 and address)
4. Type **See Back **See Back **See Back N/A 2005 (drawing no.) (mat'l spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code, Section II1,Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly S/N 5206 and Motor Housing Assembly S/N 5776
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & In.) 4.905" Length overall (ft & In.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:
10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 csi at temp. 60 OF (when applicab!e)

Supplemental Information Inthe form of lists, sketches, or drawings may be used provided (1) size Is 8 ' x 11. (2) information Initerns 2 and 3 on this Data Report is Included on each sheet, (3) each sheet Isnumbered and the numberof the sheets Is recorded on this form.

Form N-2 FORM N-2 (Back - Pg. 2 of_2 Certificate Holder' s Serial Nos. 3232 through 3282 CERTIFICATION OF DESIGN Design specifications certified by Donn M.Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and that this (these) CEDM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT. Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, Date 0

/2,ZIOS' Name LCC Newington Operations Signed -

I (NPT Certificate Holder) (authorized representative)

CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New Hampshire and employed by HSB CT or

  • Hartford. CT have inspected these items described In this Data Report on _../-7-!or , and state that to the best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code, Section lII, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, conceming the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind arising f m or connected with this Inspection.

Date /PZ Signed eZ 0'21 Commissions NH710 (Authorized Nuclear Inspector) (Nat'l. Bd. (incl. endorsements) and state or prov. and no.)

From Page 1, Line 4 DRAWING J,DWG,,ITEM, NO. REV. NO.

ITEM MATERIAL DESCRIPTION IDENT.

MATERIAL SPECIFICATION TENSILE (PSI)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA182 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21388 SA 182 F403-Mod 110, 000

____________ _________________Code Case N-4-11 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA182 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0340 SA 213 TYPE 316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC. 74 Old Dover Road, Newington, NH 03801 (name and address ot NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC. 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1. 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type *See Back *See Back **See Back N/A 2005 (drawing no.) (mat'l spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date NIA (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly S/N 5159 and Motor Housing Assembly S/N 5779
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & In.) 4.905" Length overall (ft & In.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:

National National Part or Appurtenance Board No. Part or Appurtenance Board No.

Serial Number in Numerical Order Serial Number In Numerical Order (1) 3283 N/A (26)

(2) (27)

(3) (28)

(4) (29)

(5) (30)

(6) (31)

(7) (32)

(8) (33)

(9) (34)

(10) (35)

(11) (36)

(12) (37)

(13) 1 (38)

(14) (38)

(15) (40)

(16) (41)

(17) (42)

(18) (43)

(19) (44)

(20) (45)

(21) (46)

(22) (47)

(23) (48)

(24) (49)

(25) (50)

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 'F (when applicable)

Supplemental Information In the form of lists, sketches, or drawings may be used provided (1) size Is 8 2 x 11. (2) information InItems 2 and 3 on this Data Report IsIncluded on each sheet, (3)each sheet is numbered and the number of the sheets Is recorded on this form.

Form N-2 FORM N-2 (Back - Pg. 2 of_2)

Certificate Holder' s Serial Nos. 3283 through 3283 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. State CT Reg. no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and that this (these) CEOM Pressure Housing Assembly conforms to the rules of construction of the ASME Code.Section III, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company. C_.* --

Date / Name ,CC Newington Operations Signed (NPT Certificate Holder) (authorized representative)

CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New Hampshire and employed by HSB CT of Hartford, CT have inspected these items described in this Data Report on ,__/_._/__"_ ,and state that to the best of my knowledge and belief, the Certificate Holderhas fabricated these parts or appurtenances in accordance 'wth the ASME Code, Section lit, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this certificate, neither the Inspector nor his employer makes any warranty, expressed or Implied, conceming the equipment described in this Data Report. Furthermore, neither the Inspector nor his employer shall be liable In any manner for any personal Injury or property damage or loss of any kind arisingrom or connected wh this Inspec n.

ft Date Signed Commissions NH-710 (Authorized Nuclear Inspector) (Narl. Bd. (Incl. endorsements) and state or prov. and no.)

From Page 1, Une 4 DRAWING 1 DWG. - ITEM ITEM MATERIAL MATERIAL TENSILE NO. REV.' NO. DESCRIPTION IDENT. SPECIFICATION (PSI)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA182 F348 70, 000 SCEDM-163-112 07 2 Motor Housing MT21388 SA 82 F403-Mod 110,N000

_____________________________ ________ I Code Case N-4-11 SCEDM-163-112 07 3 Lower End Fitting MT21475 SA182 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75,000 SCEDM-163-102 08 2 Tube 04-0341 SA 213 TYPE 316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

Form N-2 FORM N-2 CERTIFICATE HOLDERS' DATA REPORT FOR IDENTICAL NUCLEAR PARTS AND APPURTENANCES*

As Required by the Provisions of the ASME Code,Section III Not to Exceed one Day's Production Pg. 1 of 2

1. Manufactured and certified by Westinghouse Electric Co. LLC, 74 Old Dover Road, Newington, NH 03801 (name and address of NPT Certificate Holder)
2. Manufactured for Westinghouse Electric Co. LLC, 20 International Drive, Windsor, CT 06095-0500 (name and address of purchaser)
3. Location of installation Calvert Cliffs Unit 1, 1650 Calvert Cliffs Parkway, Lusby MD 20657 (name and address)
4. Type **See Back **See Back **See Back N/A 2005 (drawing no.) (marl spec. no.) (tensile strength) (CRN) (year built)
5. ASME Code,Section III, Division 1: 1998 2000 1 N-4-11, 2142-2 (edition) (addenda date) (class) (Code case no.)
6. Fabricated in accordance with Const. Spec. (Div. 2 only) N/A Revision N/A Date N/A (no.)
7. Remarks: CEDM Pressure Housing Assembly consisting of Upper Pressure Housing Assembly SIN 5207 and Motor Housing Assembly SIN 5781
8. Nom. thickness (in.) .240 Min. design thickness (in.) .167 Dia. ID (ft & In.) 4.905" Length overall (ft & In.) 214.8"
9. When applicable, Certificate Holders' Data Reports are attached for each Item of this report:

National National Part or Appurtenance Board No. Part or Appurtenance Board No.

Serial Number In Numerical Order Serial Number In Numerical Order

)

(1 3284 N/A (26 (2 (27 (3,) _________________________________________________________________________ (28 (4; (29, _

(5) (30; (6) (31; (7) (32)

(8) (33)

(9) (34)

(10) (35)

(11) (36)

(12) (37)

(13) (38)

(14) (38)

(15) (40)

(16) (41)

(17) (42)

(18) (43)

(19) (44)

(20) (45)

(21) (46)

(22) (47)

(23) (48)

(24) (49) I-(25) (50)

10. Design pressure 2500 psi, Temp. 650 OF, Hydro. test pressure 3125 psi at temp. 60 IF (when appli:able)
  • Supplemental Information in the form cf lists, sketches, or drawings may be used provided (1) size is 8 Yz x 11. (2) lnfbrmaticn In items 2 and 3 on this Data Report is Included on each sheet, (3) each sheet Is numbered and the number of the sheets Is recorded on this form.

Form N-2 FORM N-2 (Back - Pg. 2 of2 Certificate Holder' s Serial Nos. 3284 through 3284 CERTIFICATION OF DESIGN Design specifications certified by Donn M. Matteson P.E. Stale CT Reg.no. 12140 (when applicable)

Design report certified by J. A. Stevens P.E. State CT Reg. no. 11030 (when applicable)

CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and that this (these) CEOM Pressure Housing Assembly conforms to the rules of construction of the ASME Code,Section III, Division 1.

NPT Certificate of Authorization No. N-2041 Expires February 20, 2008 Westinghouse Electric Company, If0 Date Y/,0 /0 Name LCC Newington Operations Sige I* I/--

/ / ~(NPT Certificate Holder) i/* "(authorized representative)

CERTIFICATE OF INSPECTION I, the undersigned, holding a valid commission Issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of New Hampshire and employed by HSB CT I of Hartford, CT have Inspected these Items described In this Data Report on a state that to the

,end best of my knowledge and belief, the Certificate Holder has fabricated these parts or appurtenances In accordance with the ASME Code,Section III, Division 1. Each part listed has been authorized for stamping on the date shown above.

By signing this dertificate, neither~the Inspector nor his employer makes any warranty, expressed or Implied, concerning the equipment described In this Data Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal Injury or property damage or loss of any kind arising from or connected wi this I specto Date Signed'- Commissions NH710 (Authorized Nu~lear Inspector) (Narl. Bd. (incl. endorsements) and .state or prov. and no.)

From Page 1, Une 4 DRAWING DWG. ITEM ITEM MATERIAL MATERIAL TENSILE NO. REV. NO. DESCRIPTION IDENT. SPECIFICATION (EPSI)

SCEDM-163-112 07 1 Upper End Fitting 04-0279 SA182 F348 70,000 SCEDM-163-112 07 2 Motor Housing MT21388 SA 182 F403-Mod 110,000 Code Case N-4-11 110,_000 SCEDM-163-112 07 3 Lower End Fitting 04-0280 SA182 F348 70, 000 SCEDM-163-102 08 1 Upper End Fitting 28971 SA 479 TYPE 316 75, 000 SCEDM-163-102 08 2 Tube 04-0340 SA 213 TYPE 316 75, 000 SCEDM-163-102 08 3 Lower End Fitting 28970 SA 479 TYPE 316 75, 000

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section Xl I. Owner: Calvert Cliffs Nuclear Power Plant, Inc. 6/1412006 Date:

(name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet 1 of 2.

(address)

2. Plant: Calvert Cliffs Nuclear Power Plant Unit: One (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&R No. 2005-1-015, MWO No. 1200303644 (address) (P.O. no., job no., etc.)

Calvert Cliffs Nuclear Power Plant Type Code Symbol Stamp: N/A

3. Work Performed by: (name). Authorization No.: N/A Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class: One (address)
4. Identification of System: System Number .064 System Name: Reactor Coolant System 5.(a) Applicable Construction Code and Class: ASME B31.7, 1969 Edition, Sum. 1971c Add; Class I (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition
6. Identification of Components Repaired or Replaced and Replacement Components: ASME Repaired, Code Name of Name of Manufacturers National Other Year. Replaced, oi Stamped Componet Manufacturer Serial Number Board No. Identification Built Replacemen (Yes or No)

Piping System Bechtel Reactor Vessel Head N/A Reactor Cooling Sys. 1970 Repaired/Repl No Vent Instrumentation and vent line aced piping/tubing Pipe DuBose National 400298 Ht.#AJ7985 N/A Pipe, 3/4 In. Sch. 80, ASME SA- 2000 Replacement No Energy Services 376, Tp. 316 Inc.

Adapter Die-A-Matic Inc. F-2531 Fit. Code: N/A Adapter. 314 in. X 3/4 in. 1975 Replacement No 149A Pipe/Tubing, Parker, P/N 12-3/4-AW-SS, ASME SA182 or SA479, Gr. F316 Nut Mackson Inc. 411524 Ht.#: S44037 N/A Nut, Heavy Hex, 3/4 in. X 10 TPI, 2003 Replacement No ASME SA-194, Gr. 2H Rod Mackson Inc. 408692 Ht.#: N/A Rod, AlIthread, 3/4 In. X 10 TPI, 2002 Replacement No 3401H5512 ASME SA-193, Gr. B7 Groove Flange DuBose National 54906-GX Ht.#: N/A Flange, 3/4 In., 1500 lb., Sch. 80. 1992 Replacement No Energy Services D4214 Large Groove, Sockehveld, Inc. ASME SA-182, Gr. F316 Tongue Flange Hub Inc. 29600-GX Ht.-: N/A Flange, 3/4 in., 1500 lb.. Sch. 80, 1990 Replacement No D3350 Large Tongue, Socketveld, ASME SA-182, Gr. F316 Tubing Union Parker Hannifin 34290-GX Ht.k: N/A Union, Tubing, 314 in. Parker 1989 Replacement Corp CAKE Hannifin, P/N 12-12HBZ-SS, ASME SA-182 or SA-479, Gr.

F316 Elbow Tioga Pipe Supply 415510 Ht.Code: N/A Elbow. Pipe. 3/4 in.. 45 Deg.. 3000 2005 Replacement No Co. Inc. HO lb.. Sockenveld. ASME SA-1 82.

Gr. F316 NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x II in., (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of 3heets is -

rornrd*ri -t 4,A tnn nf' th; f'nnn

Sheet,, of J.,

FORM NIS-2 (Back)

Angle Consolidated 17166-GXI Ht.#: N/A Angle, 4 In. X 4 in. X 3/8 In., 1996 Replacement No Power Supply 20923 ASME SA-479, Tp. 316 Steel Plate DuBose National 400432 Ht.#: 813705 N/A Plate. Steel. 1/2 In. X 48 in. X 96 2002 Replacement No Energy Services in., ASTM-A240, Tp. 304 Inc.

Capscrew lMlackson Inc. 412466 Ht.#: 6959H N/A Capscrew, Hex Head, 1/2 in. X 1 2004 Replacement No 1/2 in.X 13 TPI, ASME SA-193 Gr. BSM Nut DuBose National 405813 Ht.#: 719010 N/A Nut, Heavy Hex, I/2 in. X 13 TPI, 2001 Replacement No Energy Services ASME SA-194, Gr. 8M Inc.

7. Description of Work:

This plan was for the modification and replacement work on 3/4" CC-9-1 001, Reactor Vessel Cooling Sys.

Instrumentation and vent line piping/tubing.

8. Tests Conducted: Hydrostatic: ýi Pneumatic,..' Nominal Operating Pressure: Inservice: U] Leakage: !_ Functional:;j Pressure: N/A psi. Test Temperature: N/A Deg. F
9. Remarks:

No Section XI Pre-Service NDE was performed in support of this activity.

. Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Renair/Repla cement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp: N/A Certificate of AuthorizationNo.: N/A Expiration Date: N/A

/ Charles H. Ballard Signed: Engineering Technician Date: 6/14/2006 Owe r OwýrsDsgeTtF Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by ABS Consulting of Houston, Tx. have inspected the components described inthis Owner's Report during the period Z -,aS 6 to 4' -

= -,o - , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

Comnmissions: X17?1;uýý ec,41'O (.0.c30,V*

Inspector's Signature National Board, State, and Endorsements Date: - / -- 200 -

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section Xl I. Owner: Calvert Cliffs Nuclear Power Plant, Inc. Date: 6/1/2006 (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet I -of 2 (address)

2. Plant: Calvert Cliffs Nuclear Power Plant Unit: One (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&R No. 2005-1-023, MWO No. 1200404619 (address) (P.O. no., job no., etc.)

Type Code Symbol Stamp: N/A

3. Work Performed by: Calvert Cliffs Nuclear Power Plant (name) Authorization No.: N/A Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class: One (address)
4. Identification of System: System Number 064 System Name: Reactor Coolant System 5.(a) Applicable Construction Code and Class: ASME B31.1.0, 1967 Edition, CCases N-2, N-10 (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition
6. Identification of Components Repaired or Replaced and Replacement Components: ASME Repaired, Code Name of Name of Manufacturers National Other Year Replaced, oi Stamped Componet Manufacturer Serial Number Board No. Identification Built Replacemen (Yes or No)

Valve ITT Hammel-Dahl 69-4126-027 N/A #1IA Pressurizer Spray Control 1975 Repaired/Repl No Valve (I-CV-100E), By-pass aced Throttling Valve Plug & Seat ABB Combustion 15127-MX SN: N/A Assembly, Plug & Seat Ring, 3/4 1982 Replacement No Ring Assembly Engineering IG3807 in. Globe Valve, ASTNI A-351, Gr. CF8M, BGEDRWG #12121-0016, item# 6

7. Description of Work:

This plan was for the material/parts needed to rebuild 1-HVRC-219, #1 1A Pressurizer Spray Control Valve (1-CV-100E), By-pass Throttling Valve.

8. Tests Conducted: Hydrostatic:C: Pneumatic= Nominal Operating Pressure: Inservice: Z Leakage:
  • Functional:.-

Pressure: N/A psi. Test Temperature: N/A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-I/2 in. x I I in., (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

No Section X1 Pre-Service NDE was performed in support of this activity.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repair/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: NIA Charles H. Ballard Signed: V Engineering Technician Date:

6/1/2006

- ~wner or'Oiviiei~s E~esign~, Tit1~'

Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by ABS Consulting of Houston, Tx. have inspected the components described in this Owner's Report during the period 4 0 5- to q-- ? - g, ., and state to the best of my knowledge and belief, the Owner has performed examinations and .taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

Commiss ions: AJ41?6A'A-1 To A/9,0 cv3 0 isA/I: I,, Z:

L" Inspector's Signature National Board, State, and Endorsements Date: ,- 1/3-- 200 6

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner: Calvert Cliffs Nuclear Power Plant, Inc. Date: 6/1/2006 (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet 1 of 2 (address)
2. Plant: Calvert Cliffs Nuclear Power Plant Unit: One (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&R No. 2005-1-024, MWO No. 1200404623 (address) (P.O. no., job no., etc.)
3. Work Performed by: Calvert Cliffs Nuclear Power Plant Type Code Symbol Stamp: N/A (name) Authorization No.: N/A Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class: One (address)
4. Identification of System: System Number 064 System Name: Reactor Coolant Systemr 5.(a) Applicable Construction Code and Class: ASME B31.1.0, 1967 Edition, CCases N-2, N-10 (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition
6. Identification of Components Repaired or Replaced and Replacement Components: ASME Repaired. Code Name of Name of Manufacturers National Other Year Replaced, oi Stamped Componet Manufacturer Serial Number Board No. Identification Built Replacemen (Yes or No)

Valve ITT Hammel Dahl 69-4126-001 N/A # I IA Pressurizer Spray Control 1975 Repaired/Repl No Valve aced Plug Flowserve 400322 SN: 2 N/A Plug for 3 in. 1500 lb. ITT 2000 Replacement No Corporation Hammel-Dahl Angle Valve, BGEDRWG #12121-0006, item #6

7. Description of Work:

This plan was for the parts needed to rebuild 1-CV-1ODE, # 11A Pressurizer Spray Control Valve.

8. Tests Conducted: Hydrostatic:_- Pneumaticl"! Nominal Operating Pressure: Inservice: 0 Leakage: ] Functional:':D Pressure: N/A psi. Test Temperature: . N/A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in., (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

No Section XI Pre-Service NDE was performed in support of this activity.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this RepairlReplacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A Charles H. Ballard Signed: Engineering Technician Date: 6/1/2006 Owner or Owner's Designee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by ABS Consulting of Houston, Tx. have inspected the components described in this Owner's Report during the period 6 - e ' 5- to 5 , , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

i 1) eC zr. Commissions: AAre"L t 7 ~e'R 0 .1630 ,iJ .C.

Inspector's Signature National Board, State, and Endorsements Date: /.. Q,- -- 200_,k

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI I. Owner: Calvert Cliffs Nuclear Power Plant, Inc. Date: 6/112006 (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet I of 2 (address)

2. Plant: Calvert Cliffs Nuclear Power Plant Unit: One (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&R No. 2005-1-025, MWO No. 1200404347 (address) (P.O. no., job no., etc.)

Type Code Symbol Stamp: N/A

3. Work Performed by: Calvert Cliffs Nuclear Power Plant (name) Authorization No.: N/A Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 'Section XI Class: One (address)
4. Identification of System: System Number 064 System Name: Reactor Coolant System 5.(a) Applicable Construction Code and Class: ASME B&PV Code Sect. III, 1968 Edition, Win. 1968 Add; Class A, CCases 1581, N-2, N-10 (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition
6. Identification of Components Repaired or Replaced and Replacement Components: ASME Repaired, Code Name of Name of Manufacturers National Other Year Replaced, oi Stamped Componet Manufacturer Serial Number Board No. Identification Built Replacemen (Yes or No)

Valve Dresser Industrial BS-07325 N/A Unit #1 Pressurizer Electromatic 1975 Repaired/Repl No Valve Co. Power Operated Safety Valve aced Electromatic Wyle Laboratories 414570 SN: BY- N/A Valve, Pressurizer ERV, 2 1/2 In. 2005 Replacement No Relief Valve 68900 2500 lb., Consolidated Electromatic, P/N: 31533VX-30 XFFI-NC2005 Disc Dresser Industries 404221 SN: ADH89 N/A Disc, Main, 2 1/2 in., P/N 2001, Replacement No Inc. 4235801N, ASTM A565, Gr. 616, ERV, BGEDRWG #12965-0022, Item# 2

7. Description of Work:

This plan was for the replacement of 1-ERV-402, Unit-1 Pressurizer Power Operated Relief Valve.

8. Tests Conducted: Hydrostatic:"- Pneumatic.-. Nominal Operating Pressure: Inservice: "_- Leakage: W Functional: 7 Pressure: 2260 psi. Test Temperature: 533 Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in., (2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

A Section Xl System Leaka-ge Test of the affected component was performed during the system conditions listed in section 8. of this report.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repalr[Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A Charles H. Ballard Signed:. ~ Engineering Technician Date: 6/1/2006 Owner or Owner gleggnc, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by ABS Consulting of Houston, Tx. have inspected the components described in this Owner's Report during the period . -,- / - (, to 5-- 7 6- a 6 , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described inthis Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

,* ?A

  • W 2 A -) Commissions: 111/4 7/',,, L /)

q-R')OA Insnetnr'a Si-natutrcf National Board, State, and Endorsements Date: 6- /

  • 200" .

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner: Calvert Cliffs Nuclear Power Plant, Inc. Date: 617/2006 (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet 1 of.2 (address)
2. Plant: Calvert Cliffs Nuclear Power Plant Unit: One (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&R No. 2005-1-026, MWO No. 1200403172 (address) (P.O. no.,job no., etc.)

Calvert Cliffs Nuclear Power Plant Type Code Symbol Stamp: N/A

3. Work Performed by:

(name) Authorization No.: N/A Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class: One (address)

4. Identification of System: System Number .0_5.2 System Name: Safenje_! ..... .....

5.(a) Applicable Construction Code and Class: ASME B31.1.0, 1967 Edition, CCases N-2, N-10 (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition

6. Identification of Components Repaired or Replaced and Replacement Components: ASME Repaired, Code Name of Name of Manufacturers National Other Year Replaced, oz Stamped Componet Manufacturer Serial Number Board No. Identification Built Replacemen (Yes orNo)

Valve ITT Hammel-Dahl SN: 83839-005 N/A #12A Safety Injection Tank, 1974 Repaired/Repl No Check Valve leakage drain CV to aced R.W.T.

Plug Assembly Tyco Valves & 416013 SN:K99963- N/A Plug & Stem Ass. I in. 1500 lb. 2006 Replacement No Controls LP, 31-0001 ITT Hammel-Dahl Unbalanced Crosby Div. Globe Valve. BGEDRWG 12121-0013, Item #6

7. Description of Work:

This plan was for the parts needed to rebuild 1-CV-638, #12A Safety Injection Tank Reactor Safeguards Check Valve leakage drain to R.W.T.

8. Tests Conducted: Hydrostatic:'.-.' Pneumatic:.. Nominal Operating Pressure: Inservice:-_ , Leakage: Functional:

Pressure: N/A psi. Test Temperature: N/A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x II in., (2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

  • Sheet 2 of 2 FORM NIS-2 (Back)
9. Remarks:

No Section X1 Pre-Service NDE was performed in support of this activity.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repair/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp: N/A Certificate of AuthorizationNo.: N/A Expiration Date: N/A Charles H. Ballard Signed: Date: 6/7/2006 Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by ABS Consulting of Houston, Tx. have inspected the components described in this Owner's Report during the period 2 e' tL to S-/-1,2 -e 4 , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance withthe requirements of the ASME Code, Section Xl.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

G2Z2 46ý' Commissions: [/A/TA/,L k(, *C,30 6'- /V .

Inspector's Signature National Board. State, and Endorsements Date: 6 - /3 - 200

  • FORM NIS-2 OWNER S REPORT FOR REPAIR / RE, _ACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI I. Owner: Calvert Cliffs Nuclear Power Plant, Inc. Date: 6115/2006 (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet I of 2 (address)
2. Plant: Calvert Cliffs Nuclear Power Plant Unit: One (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&R No. 2005-1-030a, MWO No. 1200405334 (address) (P.O. no., job no., etc.)
3. Work Performed by: Calvert Cliffs Nuclear Power Plant Type Code Symbol Stamp: N/A (name) Authorization No.: N/A Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class: Two (address)
4. Identification of System: System Number 083.8 System Name: Main Steam & SG Blowdown 5.(a) Applicable Construction Code and Class: ASME B&PV Code Sect. III, 1971 Edition, Win. 1972 Add, Class 2 (b) Applicable Sect XI Ed. for Repairs/Replacement .1998 Edition
6. Identification of Components Repaired or Replaced and Replacement Components: ASME Repaired, Code Name of Name of Manufacturers National Other Year Replaced, oi Stamped Componet Manufacturer Serial Number Board No. identification Built Replacemen (Yes or No)

Valve Velan Engineering I-FIVNIS-156 N/A Main Steam Drain 1-DR-6 Drain 1977 Repaired/Repl Yes Co. Valve First Isolation aced Gate Valve Velan Engineering 90585-GX SN: N/A Valve, Gate, 1 1/2 in., 800 lb., 1994 Replacement Yes Co. 941156-1 Socketweld, ASME SA-105, BGEDRWG #12968-0121, Item 13

7. Description of Work:

This plan was for the parts needed to replace 1-HVMS-156, first isolation valve off of the drain line for 1-DR-6.

8. Tests Conducted: Hydrostatic:-'- Pneumatic:__ Nominal Operating Pressure: lnservice:" Leakage:< Functional:

Pressure: 904 psi. Test Temperature: 530 Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x I I in., (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

Code Case N-416-2 was invoked to satisfy Section XI required pressure tests. Addtional Section III Examinations were performed (as applicable) to satisfy Code Case N-416-2 and Req.Guide 1.147.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repalr/Reolacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A Sianed: ~ ~~CharlesH.Ballard Dae 6/520 Signed: ~ /' Engineering Technician Date: 6/15/2006 Owner or Owner's Designee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by ABS Consulting of Houston, Tx. have inspected the components described in this Owner's Report during the period Žz._Zz- j to _r _ -7 and state to the best of my knowledge and belief, the Owner has perfo.rmed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

__ _ _ _ _ _ _ _ _ _ Commissions: IV,7,'gL T ,rh A h / 6 _ /I!

Inspector's Signature National Board, State, and Endorsements Date: 200.-Y.;::L-

FORM NIS-2 OWNER , REPORT FOR REPAIR / RE. ,.ACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner: Calvert Cliffs Nuclear Power Plant, Inc. Date: 6115/2006 (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet 1 of 2 (address)
2. Plant: Calvert Cliffs Nuclear Power Plant Unit: One (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&R No. 2005-1-030b, MWO No. 1200405334 (address) (P.O. no., job no., etc.)
3. Work Performed by: Calvert Cliffs Nuclear Power Plant Type Code Symbol Stamp: N/A 3.e WokeromeAuthorization No.: N/A Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class: Two (address)
4. Identification of System: System Number 083 System Name: Main Steam & SG Blowdown 5.(a) Applicable Construction Code and Class: ASME B31 .7, 1969 Edition, Sum. 1971c Add; Class 2 (b)Applicable Sect Xl Ed. for Repairs/Replacement 1998 Edition
6. Identification of Components Repaired orReplaced and Replacement Components: ASME Repaired, Code Nameof Name of Manufacturers National Other Year Replaced, oi Stamped Componet Manufacturer Serial Number Board No. Identification Built Replacemen (Yes or No)

Piping System Bechtel I 1/2"EB-12-1029 N/A Alain Steam Drain I-DR-6 Piping 1975 Repaired/Repl No aced Threaded DuBose National 10486-GX Heat N/A Nipple, Pipe, Threaded, 1 1/2 in. 1996 Replacement No Nipple Energy Services Code: S52 X 6 in. long, Schedule 80; ASME Inc. SA-106, Gr. B

7. Description of Work:

This plan was for the parts needed to support the replacement of 1-HVMS-1 56, first isolation valve off of the drain line for 1-DR-6 on line 1 1/2"EB-12-1029.

8. Tests Conducted: Hydrosataic:-__ Pneumaticr Nominal Operating Pressure: lnservice: j Leakage: "Functional:

Pressure: 904 psi. Test Temperature: 530 Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x I I in., (2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

Code Case N-416-2 was invoked to satisfy Section XI reauired pressure tests. Addtional Section III Examinations were performed (as applicable) to satisfy Code Case N-416-2 and Reg.Guide 1.147.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Reoair/Reolacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A Charles H. Ballard Signed: Engineering Technician Date: 6/1512006

~

Owner or Owner's Designee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by ABS Consulting of Houston, Tx. have inspected the components described in this Owner's Report during the period e-57-c" to 3- .*- /, , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

Commissions: AIg7,A ', / eLO g . 0 n-' .. )

Inspector's Signature National Board, State, and Endorsements Date: 200 2-- _L--

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner: Calvert Cliffs Nuclear Power Plant, Inc. Date: 6/1/2006 (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet I of 2 (address)
2. Plant: Calvert Cliffs Nuclear Power Plant Unit: One (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&R No. 2005-1-038, MWO No. 1200403674 (address) (P.O. no.,job no., etc.)
3. Work Performed by: Calvert Cliffs Nuclear Power Plant Type Code Symbol Stamp: N/A (name) Authorization No.: N/A Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class: Two (address)
4. Identification of System: System Number 052 System Name: Safety Injection 5.(a) Applicable Construction Code and Class: ASME B31.7, 1969 Edition, Sum. 1971c Add; Class 2 (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition
6. Identification of Components Repaired or Replaced and Replacement Components: ASME Repaired, Code Name of Name of Manufacturers National Other Year Replaced, ol Stamped Componet Manufacturer Serial Number Board No. Identification Built Replacemen (Yes or No)

Pipe Support Bechtel 12"GCI-1015-H7 N/A Support for LPSIISDC return 1975 Repaired/Repl No Piping to RCS Loop aced Spring Can Anvil International 415622 PN: 82N N/A Hanger, Spring, Variable, 2005 Replacement No Inc. Grinneli Grinnell Fig.82N, Size 11, Type-A Supports Pipe Clamp Anvil International 415622 PN: 216N N/A Clamp, Pipe, 12 In., Medium, . 2005 Replacement No Inc. Grinnell GrInnel.l Fig. 216N, with Bolting Supports

7. Description of Work:

This plan was for the replacement of a spring can at hanger location 12"GC-1-1015-H7, Support for LPSI/SDC return Piping to RCS Loop.

8. Tests Conducted: Hydrostatic:'- Pneumatic Nominal Operating Pressure: lnservice: Li Leakage:l- Functional: 7" Pressure: N/A psi. Test Temperature: N/A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in., (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

A Section XI VT-3 Visual Examination of the affected component support was performed prior to the system being returned to service.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repair/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A Charles H. Ballard Signed: Engineering Technician Date: 6/1/2006 Owner or Owner's Designee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by ABS Consulting of Houston, Tx. have inspected the components described in this Owner's Report during the period /) - .2 7- 0 5" to .5 - - o - , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

Commissions: Aý47"lc',*L-oo~c 3o,, 1) il Inspector's Signature National Board, State, and Endorsements Date: 6 -/1. - 200

. .FOORM NIS-2 OWNERrS REPORT FOR RE PAIR -REP LACE MENT ACTI VITY....

As Required by the Provisions of the ASME Code Section XI

1. Owner: Calvert Cliffs Nuclear Power Plant, Inc. Date: 6/812006 (name) 1650 Calvert Cliffs Parkway; Lusby, MD
  • 20657 Sheet 1 of 2 (address)
2. Plant: Calvert Cliffs Nuclear Power Plant Unit: One (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&R No. 2005-1-042, MWO No. 1200404733 (address) (P.O. no., job no., etc.)
3. Work Performed by: Calvert Cliffs Nuclear Power Plant Type Code Symbol Stamp: N/A (name) Authorization No.: N/A Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class: One (address)
4. Identification of System: System Number ....05.2 System Name: Safety_!njection ..

5.(a) Applicable Construction Code and Class: ASME B&PV Code Sect. III, 1971 Edition, Class I (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition

6. Identification of Components Repaired or Replaced and Replacement Components: ASME Repaired, Code Name of Name of Manufacturers National Other . Year Replaced, ot Stamped Componet Manufacturer Serial Number Board No. Identification Built Replacemen (Yes orNo)

Valve Crosby Valve &

Valve Crosby Valve & N55296-01-0009 N/A Unit #I Shutdown Cooling 1973 Repaired/Repl Yes Gage Co. Containment Side Return Hleader aced Relief Valve Relief Valve BGE CCNPP Shops 1200101169 SN: N/A Valve, Relief, Nozzle Type, 3/4 in. 2002 Replacement Yes N55296-01-0032 X I in., Style JR-WR-S Type B, BGEDRWG #12791-0007

7. Description of Work:

This plan was for the replacement of 1-RV-469, which is Shutdown Cooling Containment Side Return Header Relief Valve.

8. Tests Conducted: Hydrostatic:- Pneumatic:__ Nominal Operating Pressure: Inservice: ._ Leakaae: _ Functional:7 Pressure: N/A psi. Test Temperature: N/A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 1I in., (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

No Section Xi Pre-Service NDE was Performed in support of this activity.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Reoair/Reolacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A Charles H. Ballard Signed: Engineering Technician Date: 6/8/2006 Owner or Owner's Designee, Title F*

Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by ABS Consulting of Houston, Tx. have inspected the components described inthis Owner's Report during the period 3-//- d 4 to V- 4. - 0 & , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

Zl- 7 Commissions: 17A7/1v/,'-,A' "6,I'Z3 XeoO Inspector's Signature National Board, State, and Endorsements Date: - -. 200

FORM-NIS--2-OWNER'S-REPORT-FOR-REPAIR 7 REPLACEMENT-ACTIVITY As Required by the Provisions of the ASME Code Section Xl

1. Owner: Calvert Cliffs Nuclear Power Plant, Inc. Date: 611/2006 (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet 1 of 2 (address)
2. Plant: Calvert Cliffs Nuclear Power Plant Unit: One (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&R No. 2005-1-047, MWO No. 1200303755 (address) (P.O. no., job no., etc.)

Type Code Symbol Stamp: N/A

3. Work Performed by: Calvert Cliffs Nuclear Power Plant (name)

Authorization No.: N/A Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class: Two (address)

4. Identification. of System: System Number 045 System Name: Feedwater ______ ______
5. (a) Applicable Construction Code and Class: ASME 1331.1.0, 1967 Edition (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition
6. Identification of Components Repaired or Replaced and Replacement Components: ASME Repaired, Code Name of Name of Manufacturers National Other Year Replaced, oi Stamped Componet Manufacturer Serial Number Board No. Identification Built Replacemen (Yes orNo) 1975 Repaired/RepI Valve Rockwell SN: E5711-28 N/A #12 Steam Generator Feed Water 1975 Repaired/Repl No International Supply Check Valve aced Screw Edward Valves Inc. 408074 Heat Code: N/A Screw, Hvy Hex Hd,16 In. Check 2002 Replacement No K52 Valve, Edwards Fig. 970Y, A-193 Gr. B7,BGE #12399-0002 Item #12
7. Description of Work:

This plan was for the parts needed to assist in the rebuilding of 1-CKVFW-1 30, #12 Steam Generator Feedwater Check Valve. Weld build-up of the eroded/corroded areas was also allowed under this plan.

8. Tests Conducted:. Hydrostatic:E- Pneumatic.l Nominal Operating Pressure: Inservice: El Leakage: L7. Functional: M Pressure: N/A psi.. Test Temperature: N/A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in., (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

No Section Xl Pre-Service NDE was performed in support of this activity.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repalr/Reolacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp: NIA Certificate of Authorization No.: N/A Expiration Date: N/A Charles H. Ballard Signed: Engineering Technician Date: 61/2006 Owner or Owner's Des'ignee, Title Certificate of Inservice Inspection 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by ABS Consulting of Houston, Tx. have inspected the components described in this Owner's Report during the period -'3:/ - ttoo . and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

!Z t &ý Commissions:I ASnA 7Natonl' Sta3te 6oard,0 Al

-Insipector's signature National Board, State, and Endorsements Date: e-/3- ---

26&2

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI I. Owner: Calvert Cliffs Nuclear Power Plant, Inc. Date: 6/13/2006 (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet 1 of 2 (address)

2. Plant: Calvert Cliffs Nuclear Power Plant Unit: One (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&R No. 2005-1-050a, MWO No. 1200501479 (address) (P.O. no.. job no., etc.)

Calvert Cliffs Nuclear Power Plant Type Code Symbol Stamp: N/A

3. Work Performed by:

(name) Authorization No.: N/A Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class: One (address)

4. Identification of System: System Number 064 System Name: Reactor Coolant System.

5.(a) Applicable Construction Code and Class: ASME B&PV Code Sect. I11,1965 Edition, Win. 1967 Add; Class A CCa1ses f33-6-S--338 T-8-:3-9-1 (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition

6. Identification of Components Repaired or Replaced and Replacement Components: ASME Repaired, Code Name of Name of Manufacturers National Other Year Replaced, oi Stamped Componet Manufacturer Serial Number Board No. Identification Built Replacemern (Yes or No)

Pressure Vessel Combustion CE-67602 20915 #11 Pressurizer 1975 Repaired/Repi Yes Engineering aced

7. Description of Work:

This plan was for the Mechanical Stress Improvement Process (MSIP) on the Pressurizer Surge Line, 12"CC-2-1001, at the Pressurizer.

8. Tests Conducted: Hydrostatic::- Pneumatic:_._ Nominal Operating Pressure: Inservice: '." Leakage: Z Functional:*-

Pressure: N/A psi. Test Temperature:

  • N/A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x II in., (2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

A Section XI Ultrasonic Examination of the affected component was performed to satisfy Section XI Pre-Service NDE Requirements.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this RepairlReplacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A

/ / Charles H.Ballard Signed: ' Engineering Technician Date: 6/13/2006 Owner or 0Owneres Desi.gnee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by ABS Consulting of Houston, Tx. have inspected the components described in this Owner's Report during the period /- ,,5-' 6 to - '-- e* , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

-__________-___Commissions:*,4-/,o ,4/,Z. 7*R

_____ A,10/ 67,0- I!<-

. Insnector's Sicnature National Board, State, and Endorsements Date: 4 -/4-1=.- 200---

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLA-CEME[ T-ACTlVlT.Y.......

As Required by the Provisions of the ASME Code Section Xl

1. Owner: Calvert Cliffs Nuclear Power Plant, Inc. Date: 6/1312006 (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet 1 of 2 (address)
2. Plant: Calvert Cliffs Nuclear Power Plant Unit: One (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&F No. 2005-1-050b, MWO No. 1200501479 (address) (P.O. no.,job no., etc.)

Calvert Cliffs Nuclear Power Plant Type Code Symbol Stamp: N/A

3. Work Performed by: Authorization No.: N/A Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class: One (address)
4. Identification of System: System Number 064 System Name: Reactor Coolant
5. (a) Applicable Construction Code and Class: ASME 831.7, 1968 Draft Edition; Class 1 (b)Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition
6. Identification of Components Repaired or Replaced and Replacement Components: ASME Repaired, Code Name of Name of Manufacturers National Other Year Replaced, ot Stamped Componet Manufacturer Serial Number Board No. Identification Built Replacemen (Yes or No)

Piping System Combustion 42" CC-1-1006 N/A #12 Reactor Coolant Hot Leg 1974 Repaired/Repi Yes Engineering Piping aced

7. Description of Work:

This plan was for the Mechanical Stress Improvement Process (MSIP) on the Shutdown Cooling Line, 12"CC-14-1004, from the #12 RCS Hot Leg.

8. Tests Conducted: Hydrostatic:-- Pneumatic:__ Nominal Operating Pressure: Inservice: -' Leakage: _" Functional:. -_

Pressure: N/A psi. Test Temperature: N/A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in., (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

A Section Xl Ultrasonic Examination of the affected component was performed to satisfy Section XI Pre-Service NDE Requirements.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repair/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A

/ Charles H. Ballard Signed: .. _____../ Engineering Technician Date: 6/13/2006 Owner or Anefs Designee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Prcssure Vessel Inspectors and the State of Maryland and employed by ABS Consulting of Houston, Tx. have inspected the components described in this Owner's Report during the period /- " to - and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

I c S a BoaSe,a Endo rse o ts

  • , Inspector's Signature National Board, State, and Endorsements Date: <6- -/ 200Q-e.

FORM NIS-2 OWNER'S REPORT FOR REPAIR I REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner: Calvert Cliffs Nuclear Power Plant, Inc. Date: 6/13/2006 (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet I of 2 (address)
2. Plant: Calvert Cliffs Nuclear Power Plant Unit: One (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&R No. 2005-1-050c, MWO No. 1200501479 (address) (P.O. no., job no., etc.)

3 Work Performed by: Calvert Cliffs Nuclear Power Plant Type Code Symbol Stamp: N/A (m e. Authorization No.: N/A Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class: One (address)

4. Identification of System: System Number 064 System Name: Reactor Coolant System 5.(a) Applicable Construction Code and Class: ASME B&PV Code Sect. III, 1965 Edition, Win. 1967 Add; Class A

-Cases:1336,1 -3. 1359 (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition

6. Identification of Components Repaired or Replaced and Replacement Components: ASME Repaired, Code Name of Name of Manufacturers National Other Year Replaced, oi Stamped Componet Manufacturer Serial Number Board No. Identification Built Replacemen (Yes or No)

Pressure Vessel Combustion CE-67602 20915 N11 Pressurizer 1975 Repaired/Repl Yes Engineering aced

7. Description of Work:

This plan was for the Mechanical Stress Improvement Process (MSIP) on the Pressurizer Spray Line, 4"CC-11-1003, to #11 Pressurizer.

8. Tests Conducted: Hydrostatic:= Pneumatic: Nominal Operating Pressure: Inservice:- - Leakage:'__ Functional: _7 Pressure: N/A psi. Test Temperature: N/A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 1I in., (2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

A Section XI Ultrasonic Examination of the affected component was performed to satisfy Section XI Pre-Service NDE Requirements.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repair/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A 7 / Charles H. Ballard Sina Date: 6/13/2006 Owner or Owners Designee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by ABS Consulting of Houston, Tx. have inspected the components described in this Owner's Report during the period/- =,,- z , to 4 . ' , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or' implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

Commissions: /f/, /,z. ovZ) 1c ,t tiil Inspector's Signature National Board, State, and Endorsements Date: /y 200_]ýý_

FORM NIS-2 OWNER'S REPORT FOR REPAIR I REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner: Calvert Cliffs Nuclear Power Plant, Inc. Date: 611312006 (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet I of 2 (address)
2. Plant: Calvert Cliffs Nuclear Power Plant Unit: One (name) ."

1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&F No. 2005-1-050d, MWO No. 1200501479 (address) (P.O. no., job no., etc.)

Type Code Symbol Stamp: N/A

3. Work Performed by: Calvert Cliffs Nuclear Power Plant (name) Authorization No.: N/A Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class: One (address)
4. Identification of System: System Number 064 System Name: Reactor Coolant System 5.(a) Applicable Construction Code and Class: ASME B&PV Code Sect. !11, 1965 Edition, Win. 1967 Add; Class A "CCases:1336,-3-38:3,-13BT9--t (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition
6. Identification of Components Repaired or Replaced and Replacement Components: ASME Repaired, Code Name of Name of Manufacturers National Other Year Replaced, oi Stamped Componet Manufacturer Serial Number Board No. Identification Built Replacemen (Yes orNo)

Pressure Vessel Combustion CE-67602 20915 #11 Pressurizer 1975 Repaired/Repl Yes Engineering aced

7. Description of Work:

This plan WAs for the Mechanical Stress Improvement Process (MSIP) on the Pressurizer Relief Valve Nozzle Line, 4"CC-10-1005, to 1-RV-200.

8. Tests Conducted: ilydrostatic::-"; Pneumatic:-. Nominal Operating Pressure: Inservice: Leakage:' Functional::

Pressure: N/A psi. Test Temperature: N/A Deg..F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in., (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

A Section XI Ultrasonic Examination of the affected component was performed to satisfy Section XI Pre-Service NDE Requirements.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repair/Reolacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: NIA Charles H. Ballard Signed: I ~ /4,/j Engineering Technician Date: 6/13/2006 Owner orb_"ý_Ces 5C7'._

Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by ABS Consulting of Houston, Tx. have inspected the components described in this Owner's Report during the period /- -*-eq 6 to 4- e5- 0 , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

6' .6?i~ Commissions: ,/1X716,T/ ,4, ;ROAf1 6o 50 i/' ,1.

National Board, State, and Endorsements Date:. - .e/,. Inspector's Signature 200_(.._

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner:

Calvert Cliffs Nuclear Power Plant, Inc. Date: 6113/2006 (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet 1 of 2 (address)

2. Plant: Calvert Cliffs Nuclear Power Plant Unit: One (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&FI No. 2005-1-050e, MWO No. 1200501479 (address) (P.O. no., job no., etc.)
3. Work Performed by: Calvert Cliffs Nuclear Power Plant Type Code Symbol Stamp: N/A (name) Authorization No.: N/A Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class: One (address)
4. Identification of System: System Number 064 System Name: Reactor Coolant Systemg___

5.(a) Applicable Construction Code and Class: ASME B&PV Code Sect. III, 1965 Edition, Win. 1967 Add; Class A Ctases:f3 13T-3 33-8.- -3"9-(b) Applicable Sect XI Ed. for Repairs/Replacement 1998, Edition

6. Identification of Components Repaired or Replaced and Replacement Components: ASME Repaired, Code Name of Name of
  • Manufacturers National Other Year Replaced, oi Stamped Componet Manufacturer Serial Number Board No. Identification Built Replacemen (Yes orNo)

Pressure Vessel Combustion CE-67602 20915 N11 Pressurizer 1975 Repaired/Repl Yes Engineering aced

7. Description of Work:

This plan was for the Mechanical Stress Improvement Process (MSIP) on the Pressurizer Relief Valve Nozzle Line, 4"CC-10-1006, to 1-RV-201.

8. Tests Conducted: Hydrostaticpj Pneumatici__ Nominal Operating Pressure: lnservice: L Leakage:
  • Functional:.

1,% .. .. .. l A _ _

Pressure: i'/I- psi. Test Temperature: N/A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in., (2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

A Section XI Ultrasonic Examination of the affected component was performed to satisfy Section XI Pre-Service NDE Requirements.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the'statements made in this report are correct and that this .Rep~air/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A A/  ; / _1* 1 Charles H. Ballard Signed: Engineering Technician Date: 6/13/2006 Owner or n*es Designee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by ABS Consulting of Houston, Tx. have inspected the components described in this Owner's Report during the period ,,7.5- 0 o. 1, to - and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

Commissions: 4,*,zT/f.iqZ-Co ms s *dq// * '36' i/V/II "

-7 Inspector's Signature National Board, State, and Endorsements Date: - 200 ý,

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner: Calvert Cliffs Nuclear Power Plant, Inc. Date: 6/13/2006 (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 .Sheet 1of .2 (address)
2. Plant: Calvert Cliffs Nuclear Power Plant Unit: One (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&R No. 2005-1-050f, MWO No. 1200501479 (address) (P.O. no., job no., etc.)
3. Work Performed by: Cliffs Nuclear Power Plant Calvert(name) Type Code Symbol Stamp: N/A Authorization No.: N/A Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class: One (address)
4. Identification of System: System Number 064 System Name: ReactorCoolant.Sysýtem
5. (a)Applicable Construction Code and Class: ASME 131.7, 1968 Draft Edition; Class I (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition 6.. Identification of Components Repaired or Replaced and Replacement Components: ASME Repaired, Code Name of Name of Manufacturers National Other Year Replaced, ot Stamped Componet Manufacturer Serial Number Board No. Identification Built Replacemen (Yes orNo)

Piping System Combustion 42" CC-1-1001 N/A #11 Reactor Coolant Hot Leg 1974 Repaired/Repl Yes Engineering Piping aced

7. Description of Work:

This plan was for the Mechanical Stress Improvement Process (MSIP) on the #11 RCS Hot Leg Drain, 2"CC-9-1007.

8. Tests Conducted:. Hydrostatic:- Pneumatic:ý_ Nominal Operating Pressure: Inservice:, Leakage:" Functional:~

Pressure: N/A psi. Test Temperature: N/A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x I I in., (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

A Section XI Ultrasonic Examination of the affected component was performed to satisfy Section XI Pre-Service NDE Requirements.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this RepairlReplacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A Signed: ...... Owner o

  • , . ,1 / Charles H. Ballard Engineering Technician Date: 6/13/2006 Owner or Owne,esbesgnee, Title-Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by ABS Consulting of Houston, Tx. have inspected the components described in this Owner's Report during the period /'-<..2$- c' (, to 6- 9-06, , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

.,e . Commissions: ,f72O4" /,9l-. 'of 4

) o3OS "0 Insnector's Signature National Board, State, and Endorsements Date: -- /4,..- 200Q.

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section Xl I. Owner: Calvert Cliffs Nuclear Power Plant, Inc. Date: 6/13/2006 (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet 1 of 2 (address)

2. Plant: Calvert Cliffs Nuclear Power Plant Unit: One (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&R No. 2005-1-050g, MWO No. 1200501479 (address) (P.O. no., job no., etc.)
33. Work Calvert Cliffs Nuclear Power Plant Type Code Symbol Stamp: N/A Performed by: (name) Authorization No.: N/A Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class: One (address)
4. Identification of System: System Number 064 System Name: Reactor Coolant System 5.(a) Applicable Construction Code and Class: ASME B31.7, 1968 Draft Edition; Class I (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition
6. Identification of Components Repaired or Replaced and Replacement Components: ASME Repaired, Code Name of Name of Manufacturers National Other Year Replaced, oi Stamped Componet Manufacturer Serial Number Board No. Identification Built Replacemen (Yes or No)

Piping System Combustion 42" CC-1-1001 N/A #11 Reactor Coolant Hot Leg 1974 Repaired/Repl Yes Engineering Piping aced

7. Description of Work:

This plan was for the Mechanical Stress Improvement Process (MSIP) on the Pressurizer Surge Line, 12"CC-2-1001, at the #11 RCS Hot Leg nozzle.

8. Tests Conducted: Hydrostatic:-. Pneumatic:.- Nominal Operating Pressure: lnservice:' ..J Leakage: __ Functional:'

Pressure: N/A psi. Test Temperature: N/A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x II in., (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

A Section XI Ultrasonic Examination of the affected component was performed to satisfy Section XI Pre-Service NDE Requirements.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repalr/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A

/ /' Charles H. Ballard Signed: Engineering Technician Date: 6/13/2006 Owner or Owner's Designee. Title Certificate of Inservice Inspection 1,the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by ABS Consulting of Houston, Tx. have inspected the components described in this Owner's Report during the period /1-75--o. to Z - e - o, , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

__ Z?

_______e_______,_ Commissions: /414 /o/iA,1i- : ,q1Z' 6030 "<11,) IT--

Inspector's Sigjnature National Board, State, and Endorsements Date: 6* - -- L-- 0/

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section Xl

1. Owner: Calvert Cliffs Nuclear Power Plant, Inc. Date: 6/13/2006 (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet I of 3 (address)
2. Plant: Calvert Cliffs Nuclear Power Plant Unit: One (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&R No. 2005-1-051, MWO No. 1200501480 (address) (P.O. no., job no., etc.)

J. Work Performed by: Calvert b(name)

Cliffs Nuclear Power Plant Type Code Symbol Authorization N/A N/A No.: Stamp:

Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class: One (address)

4. Identification of System: System Number ..06.4. System Name: Reactor Coolant Sys.tem.

5.(a) Applicable Construction Code and Class: ASME B31.7, 1968 Draft Edition; Class I (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition

6. Identification of Components Repaired or Replaced and Replacement Components: ASME Repaired, Code Name of Name of Manufacturers National Other Year Replaced, oi Stamped Componet Manufacturer Serial Number Board No. Identification Built Replacemen (Yes or No)

Piping System Combustion 42" CC-I, 314" N/A Unit #1 Reactor Coolant Piping 1970 Repaired/Repl No Engineering RTD's & PDT's Instrument/Sample taps & aced associated piping Tubing DuBose National 400298 Ht#:452424 N/A Tubing, 3/4 In. X .065 Wall, 2000 Replacement No Energy Services ASME SA 213, Tp. 316 Inc.

Thermowell Weed Instrument 415814 SN: N20173, N/A Thermowell, 3/4 In., Primary 2006 Replacement No Co., Inc. N20174 Resistance Temperature Detector, ASME SB-166. Tp. 690 (N06690)

Thermowell Wced Instrument 415814 SN: N20164. NIA Thermowell, 314 in., Primary 2006 Replacement No Co., Inc. N20170 Resistance Temperature Detector, ASME SB-166, Tp. 690 (N06690)

Thermowell Weed Instrument 415814 SN: N20160, N/A Thermowell, 3/4 in., Primary 2006 Replacement No Co., Inc. N20163 Resistance Temperature Detector, ASNIE SB-166, Tp. 690 (N06690)

Thermowell Weed Instrument 415814 SN: N20154, N/A Thermowell, 314 in., Primary 2006 Replacement No Co., Inc. N20156 Resistance Temperature Detector, ASME SB-166, Tp. 690 (N06690)

Thermowell Weed Instrument 415814 SN: N20151, N/A Thermowell, 3/4 in., Primary 2006 Replacement No Co., Inc. N20152 Resistance Temperature Detector, ASME SB-166. Tp. 690 (N06690)

Pipe DuBose National 400298 Ht.4600541 N/A Pipe, 3/4 in. Sch. 80, ASME SA- 2000 Replacement No Energy Services & 030830 376. Tp. 316 Inc.

Adapter Die.A.Matic Inc. F-2531 Ht. Code: N/A Adapter. 3/4 in. X 3/4 in. 1975 Replacement No 149A Pipe/Tubing. Parker. P/N 12-3/4-AW-SS. ASME SA182 or SA479.

Gr. F316 Tubing Union Die-A.M1atic Inc. F-6251 He. Code: N/A Union, Tubing. 3/4 in. Parker 1975 Replacement No 257 Ilannifin. P/N 121-DV-SS, AST.MI/ASME A/SAI82 or A/SA479. Gr. F316

Tubing Union Die-A-Matic Inc. F-2531 Ht. Code: N/A Union, Tubing, 3/4 In. Parker 1975 Replacement No 305A Hannifin, P/N 12HW-SS, ASTMIASNIE A/SA182 or A/SA479, Gr. F316 Hermavalve Rockwell 40074-GX N/A Valve, Globe, 3/4 in., 1690 lb., 1983 Replacement Yes International Flow SN:BV320,BV323,BV Hermavalve, ASME SA-182, Tp.

Control Division 339 316, BGEDRWG. #12847-0050&0062, item 3 Hermavalve Rockwell 40074-GX SN: N/A Valve, Globe, 3/4 in., 1690 lb., 1983 Replacement Yes International Flow BV15,BV316,BV318 Hermavalve, ASNIE SA-182, Tp.

Control Division 316, BGEDRWG. #12847-0050&0062, item 3 Hermavalve Flowserve 416195 SN: 32BEL N/A Valve, Globe, 3/4 In., 1690 lb., 2006 Replacement Yes

  • & 33BEL Corporation Hermavalve, ASME SA-182, Tp.

316,BGEDRWG. #12847-0050&0062, Item 3 RTD Half Areva, Framatome 416056 5067559001- N/A Nozzle, Half, RTD, Areva P/N 2005 Replacement No Nozzle ANP, Inc. 10 & -20 5067559-001, ASME SA-479, Tp.

316, per 12024-0005SH0003 RTD Half Areva, Framatome 416056 5067559001- N/A Nozzle, Half, RTD, Areva P/N 2005 Replacement No Nozzle ANP, Inc. 01 thru-08 5067559-001, ASME SA-479, Tp.

316, per 12024-0005SH0003 PDT & Sample Areva, Framatome 416056 5067561001- N/A Nozzle, Half, PDT, Areva P/N 2005 Replacement No Half Nozzle ANP, Inc. 01thru-07 5067561-001, ASME SA479, Tp.

316, per 12024-0005SH0003 PDT & Sample Areva, Framatome 416056 5067561001- N/A Nozzle, Half, PDT, Areva P/N 2005 Replacement No Half Nozzle ANP, Inc. 10&-I1 5067561-001, ASME SA-479, Tp.

316, per 12024-0005SH0003

7. Description of Work:

This Plan was for the installation of 19 new 3/4" nozzles on #11 & 12 Reactor Coolant Hot Leg Piping Instrument/sample taps (RTD's & PDT's). The Instrument taps and sample point associated with this work were; 1-TE-112HA, HB, HC, HD; 1-PDT-111A, B, C, D; 1-SX-6452; 1-TE-122HA, HB, HC, HD; 1-PDT-121A, B, C, D; 1-TE-1 11X, 121X. This plan also covered the work needed to install the thermowells/pipe welds to these nozzles.

8. Tests Conducted: Hydrostatic:fl Pneumatic4. Nominal Operating Pressure: Inservice::L Leakage:7 Functional: ._

Pressure: N/A psi. Test Temperature: N/A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x II in., (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Sheet 3 of 3 FORM NIS-2 (Back)

9. Remarks:

No Section Xl Pre-Service NDE was performed in support of this activity.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repair/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A Charles H.Ballard Signed: Engineering Technician Date: 6/13/2006 SOwner or Owfer's Designee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by ABS Consulting of Houston, Tx. have inspected the components described in this Owner's Report during the period 4g 0 4, to I - 16"- o 6 , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this ce rtificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

4/ qg 0 b 30 "A tCl L1o,

  • C o m m is sio ns : A / A '

Inspector's Signature National Board, State, and Endorsements Date: e,-/V'- 200_Z,

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner: Calvert Cliffs Nuclear Power Plant, Inc_ ..... Date: 61512006 (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet 1 of 2 (address)
2. Plant: Calvert Cliffs Nuclear Power Plant Unit: One (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&R No. 2005-1-055, MWO No. 1200404503 (address) (P.O. no.job no., etc.)

Calvert Cliffs Nucea~r Power Plant Type Code Symbol Stamp: N/A

3. Work Performed by: Authorization No.: N/A Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class: One (address)
4. Identification of System: System Number 064 System Name: Reactor Coolant Sy.stem
5. (a) Applicable Construction Code and Class: ASME B&PV Code Sect. III, 1968 Edition, Win. 1968 Add; Class A, GCases 1581, N-2, N-10 (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition
6. Identification of Components Repaired or Replaced and Replacement Components: ASME Repaired, Code Name of Name of Manufacturers National Other Year Replaced, oi Stamped Componet Manufacturer Serial Number Board No. Identification Built Replacemen (Yes or No)

Valve Dresser Industrial BY-77325 N/A Unit #1 Pressurizer Electromatic 1996 Repaired/Repl No Valve Co. Power Operated Safety Valve aced Electromatic Wyle Laboratories 414570 SN: BY- N/A Valve, Pressurizer ERV, 2 1/2 in. 2005 Replacement No Relief Valve 11098 2500 lb., Consolidated Electromatic, P/N: 31533VX-30 XFFI-NC2005

7. Description of Work:

This plan was for the replacement of I -ERV-404, Unit-1 Pressurizer Power Operated Relief Valve.

8. Tests Conducted: Hydrostatic:"-i. PneumaticlJ- Nominal Operating Pressure: Inservice: 0 Leakage: i-- Functional: '

Pressure: 2260 psi. Test Temperature: 533 Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x II in., (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

A Section Xi System Leakage Test of the affected component was performed during the system conditions listed in section 8. of this report.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repair/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A Charles H-.Ballard Signed: ,,/ý/Engineering Technician Date: 6/5/2006 Owner or Owvners Designee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by ABS Consulting of Houston, Tx. have inspected the components described in this Owner's Report during the period .Z-. / -o e to L/ -/el - 0 , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector norhis employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

( 2 )", x,4 Commissions: National Bad ta, 'En0re '

Inspector's Signature National Board, State, and Endorsements Date: ilL 200 j

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI I. Owner: Calvert Cliffs Nuclear Power Plant, Inc. Date: 61112006 (naffme) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet 1 of 2-(address)

2. Plant: Calvert Cliffs Nuclear Power Plant Unit: One 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&R No. 2005-1-056, MWO No. 1200404727 (address) (P.O. no.,job no., etc.)

Calvert Cliffs Nuclear Power Plant Type Code Symbol Stamp: N/A

3. Work Performed by: Authorization No.: N/A (name)
  • Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class: One (address)
4. Identification of System: System Number 064 System Name: Reactor Coolant System 5.(a) Applicable Construction Code and Class: ASME B&PV Code Sect. I11, 1968 Edition, Win. 1968 Add; Class A, CCases N-2, N (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition
6. Identification of Components Repaired or Replaced and Replacement Components: ASME Repaired, Code Name of Name of Manufacturers National Other Year Replaced, oi Stamped Componet Manufacturer Serial Number Board No. Identification Built Replacemen (Yes or No)

Valve Dresser Industrial SN: BN-04373 N/A Unit #1 Pressurizer Safety Relief 1977 Repaired/Repi Yes Valve Co. Valve aced Nozzle Dresser Industries 410314 SN: AHD44 N/A Nozzle, NMaxlflow Relief Valve, 2 2003 Replacement Yes Inc. 1/2 In., Model 31739A, Dresser P/N 4231701N, ASME SA.182 Gr.

F347 Relief Valve Dresser Industries 414653 SN: BM- N/A Valve, Consolidated Closed 2005 Replacement Yes Inc. 07953 Bonnet Maxiflow Safety; 2-1/2 In.

Model 31739A, only forRV200 location.

Disc Dresser Industries 414884 SN:ADU57 N/A Disc, Relief Valve,2 I/2 in., 2005 Replacement Yes Inc. Model 31739A, Dresser P/N 1840404N, ASNIE SB.637 Gr. 688 (UNS N07750)

Compression Exelon Generation 414696 SN: AAA26 N/A Screw, Compression, Pressurizer 2005 Replacement Yes Screw Co. LLC Relief Valve, 2500 lb., Dresser P/N 4041505N, ASME SB-164 Cl.

A Spring Dresser Industries 414653 Washers N/A Spring and Washer Assembly, 2005 Replacement Yes Assem bly Inc. Ht.#!: 79288 Valve, Safety Relief. Consolidated-Dresser, BGEDRWG 12119-0009, Item 5 Spring Dresser Industries 414653 Spring SN: N/A Spring and Washer Assembly. 1005; Reolacernen, Yes Assembly Inc. 88957-1 Valve. Safery Relief, Consolidated-Dresser. BGEDRWG 12119-0009.

item 5 NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x I I in., (2) infom ation in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number ofishee's is

Sheet,2 of S.

FORM NIS-2 (Back)

7. Description of Work:

This plan was for the replacement of Unit-1 Pressurizer Safety Valve, I.-RV-200/VVhile at the vendor for rebuilding the spring assembly, nozzle, compression screw and disc were repla ted.)

8. Tests Conducted: Hydrostatic:i1 Pneumatic,---' Nominal Operating Pressure: Inservice: D- Leakage: 7./ Functional:r"i Pressure: 2260 psi. Test Temperature: 5f33 Deg. F
9. Remarks:

A Section Xl System Leakage Test of the affected component was performed durinq the system conditions listed in section 8. of this report.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repalr/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A Charles H. Ballard Signed: __Engineering Technician Date: 6/1/2006 Owner or Owner's Designee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by ABS Consulting of Houston, Tx. have inspected the components described inthis Owner's Report during the period oP_ - a 3 -0 6 to .5"-/Z- ' e , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

J171,,4 FA,, ,0-0A Et ý2

.gat '

______________________Commissions:

No

!n~ntetnrJr' Skn~tur,,r- National Board, State, and Endorsements Date:: .Z j.-/ .za..- 2OQ._j.....

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section Xl

1. Owner: Calvert Cliffs Nuclear Power Plant, Inc. Date: 61712006 (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet I of 0-.

(address)

2. Plant: Calvert Cliffs Nuclear Power Plant Unit: One (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&R No. 2005-1-057, MWO No. 1200404410 (address) (P.O. no., job no., etc.)
3. Work Performed by: Calvert Cliffs Nuclear Power Plant Type Code Symbol Stamp: N/A

....... Authorization No.: N/A Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class: One (address)

4. Identification of System: System Number _06.4 System Name: Reactor Coolant System 5.(a) Applicable Construction Code and Class: ASME B&PV Code Sect. III, 1968 Edition, Win. 1968 Add; Class A, (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition
6. Identification of Components Repaired or Replaced and Replacement Components: ASME Repaired, Code Name of Name of Manufacturers National Other Year Replaced, oi Stamped Componet Manufacturer Serial Number Board No. Identification Built Replacemen (Yes or No)

Valve Dresser Industrial SN: 03M-07948 N/A Unit #1 Pressurizer Safety Relief 1977 Repaired/Repl Yes Valve Co. Valve aced Nozzle Enertech Inc. 409135 SN: ADM59 N/A Nozzle, Maxiflow Relief Valve, 2 2003 Replacement Yes 1/2 In.. Model 31739A. Dresser P/N 4231701N, ASME SA-182 Gr.

F347 Relief Valve Dresser Industries 412384 SN: BM- N/A Valve, Consolidated Closed 2005 Replacement Yes Inc. 07952 Bonnet LIaxlflow Safety; 2-I/2 in.

Model 31739A. only for RV 201 location.

Disc Enertech Inc. 411828 SN: ADR37 N/A Disc, Relief Valve, 2 1/2 in., 2004 Replacement Yes Model 31739A, Dresser P/N 1840404N. ASME SB-637 Gr. 688 (UNS N07750)

Spring Cconsumer Power 414543 Wash Ht.0: N/A Spring and Washer Assembly, 2005 Replacement Yes Assembly Co. 45842 & 3 Valve, Safety Relief. Consolidated.

Dresser, BGEDRWG 12119-0009, item 5 Spring Co nsumer Power 414543 Spring Ht.': N/A Spring and Washer Assembly, 2005 Replacement Yes Assembly Co, 96872 Valve. Safety Relief. Consolidated-Dresser, BGEDRWG 12119-0009, item 5

7. Description of Work:

This plan was for the replacement of Unit-1 Pressurizer Safety Valve, 1-RV-201.

8. Tests Conducted: Hydrostatic: Pneumatic: Nominal Operating Pressure: Inservice: ... Leakage: V Fun:ctional:

Pressure: 2260 psi. Test Temperature: 53._3. Deg. F

Sheet P.of 0-FORM NIS-2 (Back)

9. Remarks:

A Section Xl System Leakage Test of the affected component was performed during the system conditions listed in section 8. of this report.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this RepalrlReplacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A Charles H.Ballard Signed: Engineering Technician Date: 6/7/2006 Owner or Owners Designee, Titie Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by ABS Consulting of Houston, Tx. have inspected the components described inthis Owner's Report during the period - Q 6' -,q/-

to - / - c 4 , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described inthis Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described inthis Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

. '* ,A *,ee..- Commissions: _____,____,_________-_______/'____

Insn p-tnr'c Sionature National Board, State, and Endorsements Date: 4 0

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner: Calvert Cliffs Nuclear Power Plant, Inc. Date: 611412006 (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet I of 2 (address)
2. Plant: Calvert Cliffs Nuclear Power Plant Unit: One (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&R No. 2005-1-067a, MWO No. 1200302985 (address) (P.O. no., job no., etc.)
3. Work Performed by: Calvert Cliffs Nuclear Power Plant Type Code Symbol Stamp: N/A

... Authorization No.: N/A (name)

Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class: One (address)

4. Identification of System: System Number 064 System Name: Reactor Coolant System-5.(a) Applicable Construction Code and Class: ASME B&PV Code Sect. Ill, 1983 Edition, Sum. 1983 Add; Class I (b)Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition
6. Identification of Components Repaired or Replaced and Replacement Components: ASME Repaired, Code Name of Name of Manufacturers National Other Year Replaced, o0 Stamped Componet Manufacturer Serial Number Board No. Identification Built Replacemen (Yes or No) 1988 Repaired/RepI RCP Seal Sulzer Bingham SN: 1C866 NB 1238 #1IB Reactor Coolant Pump 1988 Repaired/Repl Yes Inc. Mechanical Seal. aced Seal BGE CCNPP Shops 1200203958 SN: NB 1294 Seal, Cartridge Assembly (RCP) 2004 Replacement Yes IC869 875B-3V Complete Sulzer Bingham per FCR 87-0074
7. Description of Work:

This plan was for the replacement of the mechanical seal on #11 B Reactor Coolant Pump.

8. Tests Conducted: Hydrostatic:V-' Pneumatic;-- Nominal Operating Pressure: Inservice: 1 Leakage: Functional:

Pressure: 2260 psi. Test Temperature: 533 Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x II in., (2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

A Section Xl System Leakage Test of the affected component was performed during the system conditions listed in section 8. of this report.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repair/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A Signed: Date: 6/14/2006 Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by ABS Consulting of Houston, Tx. have inspected the components described in this Owner's Report during the period _,4 to "- - o , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

Commissions: A/,,l7/oA-,,,  :.?oq.eQe 1O6 O Ill _.5 National Board, State, and Endorsements Date:

  • 6Inspector's Signature

- 200____...__

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section Xl Calvert Cliffs Nuclear Power Plant, Inc. Date: 6/14/2006

1. Owner:

(name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet I of 2 (address)

2. Plant: Calvert Cliffs Nuclear Power Plant Unit: One (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&F No. 2005-1-067b, MWO No. 1200302985 (address) (P.O. no., job no., etc.)

Type Code Symbol Stamp: N/A

3. Work Performed by: Calvert Cliffs Nuclear Power Plant (name)

Authorization No.: N/A Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class: One (address)

4. Identification of System: System Number 064 System Name: Reactor Coolant System 5.(a) Applicable Construction Code and Class: ASME B&PV Code Sect. III, 1965 Edition, Win. 1967 Add; Class A (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition
6. Identification of Components Repaired or Replaced and Replacement Components: ASME Repaired, Code Name of Name of Manufacturers National - Other Year Replaced, ot Stamped Componet Manufacturer Serial Number Board No. Identification Built Replacemen (Yes or No)

Pump Byron Jackson 681-N-0440 N/A #11 B Reactor Coolant Pump 1970 Repaired/Repl Yes Pump aced Cover Flowserve 415973 SN: 681-N- N/A Pump Cover and Heat Exchanger 2005 Replacement Yes Corporation; 0439 Assembly, Bryon Jackson Part Pump Div. No. 1E-3567V V

7. Description of Work:

This plan was for the parts needed to rebuild #11 B Reactor Coolant Pump. Only the pump cover is a Section XI pressure retaining part. The pump cover was removed from #12A Reactor Coolant Pump under MO.

  1. 1199700104 and then rebuilt.
8. Tests Conducted: Hydrostatic:-, - Pneumatic:_. Nominal Operating Pressure: lnservice: "7 Leakage:
  • Functional: -_

Pressure: 2260 psi. Test Temperature: 533 Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x II in., (2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

A Section Xl System Leakage Test of the affected component was performed during the system conditions listed in section 8. of this report.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repalr/Reolacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A Charles H. Ballard Signed: Engineering Technician Date: 6/14/2006

"~weOrwnerorwe's Desiganee.Titl Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by ABS Consulting of Houston, Tx. have inspected the components described in this Owner's Report during the period ,4 -/, - 46 to .5-- -3 -- o /, , and state to the best of my knowledge and belief, the Owner has performed examinations and taken .corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

C s- 0 940/7 ,2iýea i0 - Commissions: U lpIiL AZ 4 .0 i Inspector's Signature National Board, State, and Endorsements Date: A,- /.--- 200 ,/-

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section Xl

1. Owner: Calvert Cliffs Nuclear Power Plant, Inc. Date: 6/14/2006 (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet I of .,

(address)

2. Plant: Calvert Cliffs Nuclear Power Plant Unit: One (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&R No. 2006-1-006, MWO No. 1200404658 (address) (P.O. no., job no., etc.)

Calvert Cliffs Nuclear Power Plant Type Code Symbol Stamp: N/A

3. Work Performed by:

(name) Authorization No.: N/A Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class: One (address)

4. Identification of System: System Number 064 System Name: Reactor Coolant System 5.(a) Applicable Construction Code and Class: ASME B&PV Code Sect. I11,1965 Edition, Win. 1967 Add; Class A CCases: 1335-2, 1336, 1359-1 (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition 6.. Identification of Components Repaired or Replaced and Replacement Components: ASME Repaired, Code Name of Name of Manufacturers National Other Year Replaced, oi Stamped Componet Manufacturer Serial Number Board No. Identification Built Replacemen (Yes or No)

Pressure Vessel Combustion Vessel SN: 67107; 20911 Unit #I Reactor Vessel and Head 1971 Repaired/Rep[ Yes Engineering Head SN:67207 aced Collar, Comp. CE Nuclear Power 411350 SN: 01 thru N/A Collar, Compression, for Quick- 2005 Replacement No Q-Loc LLC 08 Loc ICI Assembly.

Westinghouse/CE P/N E-Quickloc-165-002-23, Item 23 Nut, Quickloc CE Nuclear Power 411350 SN: 01 thru N/A Nut, Qulck-Loc ICI Assembly, 2005 Replacement No ICI Assy LLC 03 Westinghouse/CE P/N E-Quicldoc-165-002-24, Item No. 24 Nut, Quickloc CE Nuclear Power 400061 SN: N/A Nut, Quick-Loc ICI Assembly, 2000 Replacement No ICI Assy LLC 09,11,13,14&15 Westinghouse/CE P/N E-Quicldoc-165-002-24, Item No. 24 Plug, Quickloc, CE Nuclear Power 411350 HL: N/A Plug, Swagelok, Quick-Loc ICI 2005 Replacement No Swagelok LLC OMS,LEN,OXK,NTV Mod. Westinghouse/CE P/N E-Quickloc-165-014-8, Item No. 33 Plug, Quickloc, CE Nuclear Power 411350 Ht.: N/A Plug, Swagelok, Quick-Loc ICI 2005 Replacement No Swagelok LLC OKE,ODU,OOJ Mod. Westinghouse/CE P/N E-Quickloc-165-014-8, Item No. 33

7. Description of Work:

This plan was for the installation of new Quick-Loc parts on to the new Replacement Reactor Vessel Closure Head on the Unit #1 Reactor Vessel.

8. Tests Conducted: Hydrostatic:O] PneumaticO Nominal Operating Pi ressure: Inservice: E Leakage:[- Functional:E]

Pressure: 2260 psi. Test Temperature: 53.3 Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in., (2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Sheet A.,f ,

FORM NIS-2 (Back)

9. Remarks:

A Section X! System Leakage Test of the affected component was performed during the system conditions listed in section 8. of this report.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repair/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A Charles H. Ballard Signed: ngineering Technician Date: 6/14/2006 Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by ABS Consulting of Houston, Tx. have inspected the components described in this Owner's Report during the period 42- /1/ -0 6 to Y- /0 -0 1, , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection; Commissions: /A"7"',z,',L '-A7. /) /j/ ý Inspector's Signatre National Board, State, and Endorsements Date: 1"- 200 (

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section Xl I. Owner:

Calvert Cliffs Nuclear Power Plant, Inc. Date: 6/8/2006 (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet 1 of 2 (address)

2. Plant: Calvert Cliffs Nuclear Power Plant Unit: One (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&R No. 2006-1 -011a, MWO No. 1200600676 (address) (P.O. no., job no., etc.)

Type Code Symbol Stamp: N/A

3. Work Performed by: Calvert Cliffs Nuclear Power Plant (name) Authorization No.: N/A Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class: Two (address)
4. Identification of System: System Number 019 System Name: Compressed (Instrument) Air 5.(a) Applicable Construction Code and Class: ASME Draft Code for Pumps & Valves, 1968 Edition, March 1970 (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition
6. Identification of Components Repaired or Replaced and Replacement Components: ,ASME Repaired, Code Name of Name of Manufacturers National Other Year Replaced, oi Stamped Componet Manufacturer Serial Number Board No. Identification Built Replacemen (Yes or No)

Valve Velan Engineering 1-H VPA-1044 N/A Unit N1 Plant Air Isolation Valve 1975 Repaired/Repi Yes Co. (Containment Penetration #19B) aced Globe Valve Velan Engineering 90585-GX SN: N/A Valve, Globe, 2 in., 800 lb., 1994 Replacement Yes Co. 941159-3 Socketveld, ASME SA-I05, BGEDRWG #12968-0123, Item 24

7. Description of Work:

This plan was for the parts needed to replace 1-HVPA-1 044, Unit #1 Plant Air Isolation Valve (Containment Penetration #19B).

8. Tests Conducted: Hydrostatic:. Pneumatic,:-. Nominal Operating Pressure: Inservice:.y 'Leakage: - Functional: -7 Pressure: LLRT 50 psi. Test Temperature: N/A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x II in., (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

Code Case N-416-2 was invoked to satisfy Section XI required pressure tests. Addtional Section III Examinations were performed (as applicable) to satisfy Code Case N-416-2 and Rep.Guide 1.147.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repair/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A Charles H. Ballard Signed: Engineering Technician Date: 6/8/2006

  • TT-- r-Owner or Owner's Designee. Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by ABS Consulting of Houston, Tx. have inspected the components described in this Owner's Report during the period . - 7'- o 6 to - and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

~?Z t27* Commissions: /AA'-/evt',L ZBoAeb 4 c,3C0 0 1" Inspector's Signature National Board, State, and Endorsements Date: *,- IS 200 %

FORM NIS-2 OWNER'S REPORT FOR REPAIR I REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner: Calvert Cliffs Nuclear Power Plant, Inc. Date: 61812006 (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet 1 of 2 (address)
2. Plant: Calvert Cliffs Nuclear Power Plant Unit: One (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R&R No. 2006-1-01l b, MWO No. 1200600676 (address) (P.O. no.,job no., etc.)

Calvert Cliffs Nuclear Power Plant Type Code Symbol Stamp: N/A

3. Work Performed by:

(name) Authorization No.: N/A Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 __ Section XI Class: Two (address)

4. Identification of System: System Number ...019 System Name: Compressed (Instrument) Air
5. (a) Applicable Construction Code and Class: ASME B31.7, 1969 Edition, Sum. 1971c Add; Class 2 (b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition
6. Identification of Components Repaired or Replaced and Replacement Components: ASME Repaired, Code Name of Name of Manufacturers National Other Year Replaced, oi Stamped Componet Manufacturer Serial Number Board No. Identification Built Replacemen (Yes orNo) 1975 Repaired/RepI Piping System Bechtel 2"HB43-1002 N/A Unit #1 Plant Air Piping 1975 Repaired/Repl No (Containment Penetration #19B) aced Pipe DuBose National 400298 Ht.#: A43794 N/A Pipe. 2 in., Sch. 80, ASME SA- 2000 Replacement No Energy Services 106, Gr. B Inc.
7. Description of Work:

This plan was for the supporting material needed to replace 1-HVPA-1 044 on piping 2"HB-43-1002.

8. Tests Conducted: Hydrostatic:_- Pneumatic:_._ Nominal Operating Pressure: Inservice: W Leakage: :.. Functional:

Pressure: LLRT 50 psi. Test Temperature: N/A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (I) size is 8-1/2 in. x I I in., (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

Code Case N-416-2 was invoked to satisfy Section XI required pressure tests. Addtional Section III Examinations were performed (as applicable) to satisfy Code Case N-416-2 and Req.Guide 1.147.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Reoair/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A Charles H. Ballard Signed: t Engineering Technician Date: 6/8/2006 Owner or Owner's Designee, Title Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by ABS Consulting of Houston, Tx. have inspected the components described in this Owner's Report during the period o-6-a

  • to 9 - - * , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

a I'I I i0 Commissions: A/A4712o,1zL 'Z-3oAR6L 6,:!730 IV~

Inspector's Signature National Board, State, and Endorsements Date: 6-/- 200

FORM NIS-2 OWNER'S REPORT FOR REPAIR / REPLACEMENT ACTIVITY As Required by the Provisions of the ASME Code Section XI

1. Owner: Calvert Cliffs Nuclear Power Plant, Inc. Date: 512412006 (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 Sheet I of 2 (address)
2. Plant: Calvert Cliffs Nuclear Power Plant Unit: -Common (name) 1650 Calvert Cliffs Parkway; Lusby, MD 20657 R& ZNo. SNUB-0-006, MWO No. SNUB POOL (address) (P.O. no., job no., etc.)

Type Code Symbol Stamp: N/A

3. Work Performed by: Calvert Cliffs Nuclear Power Plant (name) Authorization No.: N/A Exp Date: N/A 1650 Calvert Cliffs Parkway, Lusby, MD 20657 Section XI Class: 1, 2, & 3 (address)
4. Identification of System: System Number 065B System Name: Seismic Snubbers 5.(a) Applicable Construction Code and Class: ASME B31.1 1967 Ed, 1972 Add; B31.7 1969 Ed, Sum. 1971 Add.;

SS-SP-9S, 1S967 Ed.

(b) Applicable Sect XI Ed. for Repairs/Replacement 1998 Edition

6. Identification of Components Repaired or Replaced and Replacement Components: . ASME Repaired, Code Name of Name of Manufacturers National Other Year Replaced, oi Stamped Componet Manufacturer Serial Number Board No. Identification Built Replacemen (Yes or No)

Snubber Pool Grinnell Snubber Pool N/A Hydraulic Shock and Sway 1975 Repaired/Repi No Corporation Suppressor aced Snubber Grinnell 59013-GX SN: 32319 N/A Hydraulic Shock and Sway 1991 Replacement No Corporation Suppressor, 1 1/2 In. Bore X 5 in.

Stroke, Grinnell Fig. 200 Opt. 1 Snubber Grinnell 59013-GX SN: 32408 N/A Hydraulic Shock and Sway 1991 Replacement No Corporation Suppressor, 5 In. Bore X 5 in.

Stroke, Grinnell Fig. 200, Miller Cylinder

7. Description of Work:

This plan was for the continued control of the Snubber Pool and documentation of new components/parts added to the Snubber Pool per Section XI 1998, IWA-4132, Items Rotated From Stock. This plan covered all Snubber work from the end of Unit #2, 2005 outage through to the end of Unit #1, 2006 outage.

8. Tests Conducted: Hydrostatic:-' Pneumatic:-' Nominal Operating Pressure: Inservice: L- Leakage: . Functional: Li Pressure: N/A psi. Test Temperature: N/A Deg. F NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x I I in., (2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.

Sheet 2 of 2 FORM NIS-2 (Back)

9. Remarks:

A Section Xl VT-3 Visual Examination of the affected component support was performed prior to the system being returned to service.

Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance We certify that the statements made in this report are correct and that this Repair/Replacement conforms to the rules of the ASME Code,Section XI.

Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A Signed:

I XWZAýJl Charles H. Ballard Engineering Technician Date: 5/24/2006

-owner of cawnel's Desi-gndc, Til --

Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by ABS Consulting of Houston, Tx. have inspected the components described in this Owner's Report during the period 3 ,- '- e .5"7to :3 - / 7 - * , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.

' "1 0 "

Commissions: ~A A'7IoL *-RoA /0 hZ- .30 I/Y *-

J Inspector's Signature National Board, State, and Endorsements Date:. X- --- 200-6

Retrieved from "https://kanterella.com/w/index.php?title=ML061980068&oldid=2583849"