ML030710188
| ML030710188 | |
| Person / Time | |
|---|---|
| Site: | Susquehanna  |
| Issue date: | 03/03/2003 |
| From: | Susquehanna |
| To: | Document Control Desk, Office of Nuclear Reactor Regulation |
| References | |
| 2003-9796 | |
| Download: ML030710188 (37) | |
Text
Mar.
03, 2003 Page 1
of 1 MANUAL HARD COPY DISTRIBUTION DOCUMENT TRANSMITTAL 2003-9796 USER INFORMATION:
F M*LAUR B
EMPL#:23244 CA#:
0363 AddressNUCSA2 Phon 254-58 TRANSMITTAL INFORMATION:
TO:
FhLAI1÷LAUfEL B
03/03/2003 LOCATION:
"-ROM:
NUCLEAR RECORDS DOCUMENT CONTROL CENTER SNUCSA-2)
"'ýHE FOLLOWING CHANGES HAVE OCCURRED TO THE HARDCOPY OR ELECTRONIC MANUAL ASSIGNED TO YOU:
TRM2 TECHNICAL REQUIREMENTS MANUAL UNIT 2 REMOVE MANUAL TABLE OF CONTENTS DATE: 01/08/2003 ADD MANUAL TABLE OF CONTENTS DATE:
02/28/2003 CATEGORY:
DOCUMENTS TYPE:
TRM ID:
TRM2 REPLACE:
REV:N/A UPDATES FOR HARD COPY MANUALS WILL BE DISTRIBUTED WITHIN 5 DAYS IN ACCORDANCE WITH DEPARTMENT PROCEDURES.
PLEASE MAKE ALL CHANGES AND ACKNOWLEDGE COMPLETE IN YOUR NIMS INBOX UPON RECEIPT OF HARD COPY.
FOR ELECTRONIC MANUAL USERS, ELECTRONICALLY REVIEW THE APPROPRIATE DOCUMENTS AND ACKNOWLEDGE COMPLETE IN YOUR NIMS INBOX.
TRM APPROVED AMENDMENT TO UNIT 2 TECHNICAL REQUIREMENTS MANUAL EFFECTIVE DATE 0212112003 Replace the following pages of the Technical Requirements Manual with the enclosed pages.
The revised pages are identified by Effective Date and contain vertical lines indicating the area of change EFFECTIVE REMOVE PAGES INSERT PAGES DATE
- .I-LOES-1 through TRM I LOES-6 TRM / LOES-1 through TRM / LOES-6 02/21/2003 TP1M 3 2-2 through 3 2-28 TRM 13 2-2 through 3.2-30 02/21/2003
+
+
SUSQUEHANNA STEAM ELECTRIC STATION LIST OF EFFECTIVE SECTIONS (TECHNICAL REQUIREMENTS MANUAL)
Section Title Effective Date TABLE OF CONTENTS 04/02/2002 1.0 2.0 USE AND APPLICATION Page TRM /1.0-1 Page TRM /1.0-2 Page TRM /1.0-3 PLANT PROGRAMS Page 2.0-1 Pages TRM / 2.0-2 through TRM / 2.0-4 Pages TRM / 2.0-5 through TRM 1 2.0-7 Page TRM / 2.0-8 "Page TRM / 2.0-9 Pages TRM / 2.0-10 through TRM / 2.0-12 Page TRM / 2.0-13 APPLICABILITY Pages TRM / 3.0-1 and TRM /3.0-2<
Page TRM / 3.0-3 Page TRM / 3.0-4 REACTIVITY CONTROL SYSTEMS~
Pages 3.1-1 through 3,1-6*
Pages TRM / 3.1-7 and TRM 13A-8 Pages TRM / 3.1-9 and TRM/ 3.1-9a Page TRM / 3.1-0 1
\\
Pages 3.1-11 through 3.1-13 CORE OPERATING LIMITS REPORT Pagbs*TRM /,3.2-2 through TRM /3.2-30 INSTRUMENTATION
\\PagqsTRM 13.3-1 through TRM / 3.3-3 Page'TRM / 3.3-4 Pages 3.3-5 through 3.3-8 Pages TRM 1 3.3-9 and TRM / 3.3-9a Pages TRM / 3.3-10 and TRM / 3.3-11 Page TRM / 3.3-12 Pages TRM / 3.3-13 through TRM / 3.3-15 Page TRM / 3.3-16 Pages TRM /3.3-17 and TRM / 3.3-18 Pages TRM / 3.3-19 through TRM / 3.3-20 Pages 3.3-21 and 3.3-22 Pages TRM / 3.3-23 through TRM / 3.3-25 SUSQUEHANNA
- UNIT 2 TRM / LOES-1 EFFECTIVE DATE 02121/2003 TOC 08/31/1998 10/04/2002 08/31/1998 08/31/1998 06/25/2002 04/12/1999 08/30/2001 09/06/2002 04/1 2/1999 06/16/2000 04/08/1999 03/15/2002 04/08/1999 08/31/1998 06105/2002 02/18/1999 02/18/1999 08/31/1998 08/31/1998 02/21/2003 07/16/1999 11/28/2000 08/31/1998 12/17/1998 12/17/1998 03/30/2001 12/14/1998 06/27/2001 06/14/2002 12114/1998 08/3111998 04/02/1999 3.0 3.1 3.2 3.3 EFFECTIVE DATE 02/2112003 TRM / LOES-1 SUSQUEHANNA -UNIT 2
SUSQUEHANNA STEAM ELECTRIC STATION LIST OF EFFECTIVE SECTIONS (TECHNICAL REQUIREMENTS MANUAL)
Section Title REACTOR COOLANT SYSTEM Pages 3.4-1 through 3.4-5 Pages 3.4-6 through 3.4-13 3.5 3.4 SUSQUEHANNA
- UNIT 2 TRM I LOES-2 EFFECTIVE DATE 02/21/2003 EMERGENCY CORE COOLING AND RCIC Pages 3.5-1 through 3.5-3 Page TRM / 3.5-4 Pages 3.5-5 through 3.5-7 CONTAINMENT Pages 3.6-1 through 3.6-4 Page TRM / 3.6-5 Page 3.6-6 Pages TRM / 3.6-7 through TRM / 3,6-9 PLANT SYSTEMS Pages TRM / 3.7-1 and TRM / 3.7-2 Page 3.7-3 Pages TRM / 3.7-4 through TRM / 3.7-10 Page TRM / 3.7-11 Pages TRM / 3.7-12 through TRM / 3.7-27 Pages TRM / 3.7-28 through TRM / 3.7-32 Page TRM / 3.7-33 Pages TRM 13.7-34 through TRM / 3.7-36 Pages 3.7-37 through 3.7-39 Pages TRM / 3.7-40 and TRM / 3.7-40a Pages 3.7-41 and 3.7-42 Pages 3.7-43 through 3.7-48 Pages TRM /3.7-49 and TRM /3.7-50 Page TRM / 3.7-51 Pages TRM / 3.7-52 and TRM / 3.7-53 ELECTRICAL POWER Pages TRM / 3.8-1 and TRM / 3.8-2 Page 3.8-3 Page TRM / 3.8-4 Pages TRM / 3.8-5 and TRM / 3.8-6 Pages TRM / 3.8-7 through TRM / 3.8-8 Page TRM / 3.8-9 Page 3.8-10 Page TRM / 3.8-11 Page TRM / 3.8-a1 a Pages 3.8-12 through 3.8-14 Pages TRM / 3.8-15 through TRM / 3.8-17 Page 3.8-18 Page TRM / 3.8-19 Effective Date 10123/1998 0813111998 08/31/1998 04/1712000 08/31/1998 08/31/1998 01/07/2002 08/31/1998 12/31/2002 07/29/1999 08/3111998 08/02/1999 01/21/2000 08/02/1999 11/16/2001 10/05/2002 02/01/1999 08/31/1998 08/111/2000 08131/1998 10/13/1998 03/09/2001 07/05/2000 07/2911999 04/02/2002 08/3111998 12/31/2002 04/02/2002 08/31/1998 08/24/2001 08/31/1998 04/02/2002 04/02/2002 08/31/1998 04/02/2002 02/0111999 04/02/2002 3.6 3.7 3.8 EFFECTIVE DATE 02/21/2003 TRM / LOES-2 SUSQUEHANNA - UNIT 2
SUSQUEHANNA STEAM ELECTRIC STATION LIST OF EFFECTIVE SECTIONS (TECHNICAL REQUIREMENTS MANUAL)
Section Title Page TRM / 3.8-20 Pages TRM / 3.8-21 through TRM / 3.8-23 Pages 3.8-24 and 3.8-25 REFUELING OPERATIONS Pages 3.9-1 through 3.9-3 MISCELLANEOUS Pages 3.10-1 through 3.10-4 Page TRM / 3.10-5 Page TRM I 3.10-6 Page TRM / 3.10-7
" Page TRM / 3.10-8 RADIOACTIVE EFFLUENTS Pages 3.11-1 through 3.11-12 Pages 3.11-13 through 3.11-16 Pages 3.11-17 through 3.11-21 Pages TRM / 3.11-22 through TRM / 3.11-24 Pages 3.11-25 through 3.11-32 Pages 3.11-33 through 3.11-47 LOADS CONTROL PROGRAM Pages TRM / 3.12-1 through TRM / 3.12-5 ADMINISTRATIVE CONTROLS Pages 4.0-1 through 4.0-8 Effective Date 02/01/1999 06106/1999 08/31/1998 08/31/1998 08/30/1998 06/05/2002 06/05/2002 04/07/2000 corrected 04117/2002 08/31/1998 09/01/1998 08/31/1998 04/02/2002 09/01/1998 08/31/1998 02/05/1999 08/31/1998 EFFECTIVE DATE 02/21/2003 3.9 3.10 3.11 3.12 4.0 SUSQUEHANNA -UNIT 2 TRM / LOES-3
SUSQUEHANNA STEAM ELECTRIC STATION LIST OF EFFECTIVE SECTIONS (TECHNICAL REQUIREMENTS MANUAL)
Section Title APPLICABILITY BASES Pages B 3.0-1 through B 3.0-10 Pages TRM / B 3.0-11 through TRM I B 3.0-15 REACTIVITY CONTROL SYSTEMS BASES Pages TRM / B 3.1-1 through TRM / B 3.1-3 Page B 3.1-4 Pages TRM / B 3.1-5 through TRM / B 3.1-7 Page TRM / B 3.1-8 Pages B 3.1-9 and B 3.1-10 CORE OPERATING LIMITS BASES Page B 3.2-1 INSTRUMENTATION BASES Page TRM/B 3.3-1 Page B 3.3-2 Pages TRMIB 3.3-3 and TRM / B 3.3-3A Page TRM / B 3.3-4 Pages TRM / B 3.3-5 and TRM / B 3.3-5a Page TRM / B 3.3-6 Pages TRM / B 3.3-7 through TRM / B 3.3-9 Pages B 3.3-10 through B 3.3-13 Page TRM / B 3.3-14 Page TRM / B 3.3-14a Page TRM/B 3.3-14b Page B 3.3-15 Page TRM/B 3.3-16 Pages B 3.3-17 through B 3.3-20 Pages TRM / B 3.3-21 through TRM / B 3.3-23 REACTOR COOLANT SYSTEM BASES Pages B 3.4-1 through B 3.4-4 Page TRM / B 3.4-5 Page B 3.4-6 ECCS AND RCIC BASES Pages B 3.5-1 through B 3.5-5 CONTAINMENT BASES Page TRM / B 3.6-1 Page TRM / B 3.6-2 Page B 3.6-3 Page TRM / B 3.6-4 Page TRM / B 3.6-5 Pages TRM / B 3.6-6 through TRM / B 3.6-11 B 3.0 B 3.1 08/31/1998 07/26/2001 02/01/1999 08/31/1998 09/2311999 01/07/2002 12/31/2002 SUSQUEHANNA
- UNIT 2 TRM / LOES-4 EFFECTIVE DATE 02/21/2003 Effective Date 08/31/1998 03/1512002 07/13/1999 08/31/1998 07/13/1999 02/18/1999 08/31/1998 08/31/1998 04/07/2000 08/31/1998 12/29/2000 01107/2002 12/1711998 12/17/1998 03130/2001 08131/1998 06/25/2002 06114/2002 06/1412002 08/31/1998 04/07/2000 08131/1998 04102/1999 08/31/1998 10/15/1999 08131/1998 B 3.2 B 3.3 B 3.4 B 3.5 B 3.6 EFFECTIVE DATE 02/21/2003 SUSQUEHANNA -UNIT 2 TRM / LOES-4
SUSQUEHANNA STEAM ELECTRIC STATION LIST OF EFFECTIVE SECTIONS (TECHNICAL REQUIREMENTS MANUAL)
Section Title B 3.7 B 3.8 B.3.9 Effective Date PLANT SYSTEMS BASES Pages B 3.7-1 and B 3.7-2 Pages TRM / B 3.7-3 through TRM / B 3.7-7 Page TRM / B 3.7-7a Pages TRM / B 3.7-8 through TRM / B 3.7-10 Page TRM / B 3.7-1 Oa Pages TRM / B 3.7-11 through TRM / B 3.7-14 Page TRM / B 3.7-14a Pages TRM / B 3.7-15 and TRM / B 3.7-16 Pages B 3.7-17 through B 3.7-20 Pages TRM I B 3.7-21 through TRM/B 3.7-21a Pages TRM/B 3.7-22 and TRM/B 3.7-23 Pages B 3.7-24 through B 3.7-30 Pages TRM / B 3.7-31 and TRM / B 3.7-32 Page TRM / B 3.7-33 Pages TRM / B 3.7-34 and TRM / B 3.7-35 ELECTRICAL POWER BASES Pages TRM / B 3.8-1 and TRM / B 3.8-2 Page TRM / B 3.8-2a Page TRM / B 3.8-3 Page TRM / B 3.8-3a Page TRM / B 3.8-4 Page TRM / B 3.8-4a Page TRM / B 3.8-5 Pages TRM / B 3.8-6 through TRM / B 3.8-17 REFUELING OPERATIONS BASES Pages B 3.9-1 and B 3.9-2 Pages B 3.9-3 through B 3.9-7 08/31/1998 08/02/1999 08/02/1999 08/02/1999 08/02/1999 08/02/1999 08/02/1999 02/01/1999 08/31/1998 05/11/2001 04/07/2000 08/31/1998 03/09/2001 07/29/1999 07/0512000 04/02/2002 04/02/2002 04/02/2002 04/02/2002 04/02/2002 04/02/2002 08/31/1998 04/02/2002 08/31/1998 10123/1998 08/31/1998 08/31/2002 08/23/1999 04/17/2002 08/3111998 02/01/1999 04/07/2000 02/01/1999 11/01/1999 02/01/1999 08/31/1998 B 3.10 MISCELLANEOUS BASES Pages B 3.10-1 through B 3.10-2 Page B 3.10-3 Pages TRM / B 3.10-4 and TRM / B 3.10-5 Pages TRM / B 3.10-6 and TRM / 3.10-7 B 3.11 RADIOACTIVE EFFLUENTS BASES Pages B 3.11-1 through B 3.11-9 Pages TRM / B 3.11-10 Pages TRM/B 3.11-11 and TRM/B 3.11-11 a Pages TRM/B 3.11-12 and TRM/B 3.11-13 Page TRM / B 3.11-14 Page TRM / B 3.11-15 Pages B 3.11-16 through B 3.11-19 EFFECTIVE DATE 02/21/2003 SUSQUEHANNA -UNIT 2 TRM / LOES-5
SUSQUEHANNA STEAM ELECTRIC STATION LIST OF EFFECTIVE SECTIONS (TECHNICAL REQUIREMENTS MANUAL)
Section Title Effective Date Page TRM / B 3.11-20 Page TRM / B 3.11-20a Pages TRM / B 3.11-21 through TRM I B 3.11-23 Page TRM / B 3.11-23a Page B 3.11-24 Page TRM / B 3.11-25 Pages B 3.11-26 through TRM I B 3.11-35 Pages TRM / B 3.11-36 B.3.12 LOADS CONTROL PROGRAM BASES Pages TRM / B 3.12-1 through TRM I B 3.12-3 04/0212002 04/02/2002 04/02/2002 04/02/2002 08/31/1998 11/01/1999 08/31/1998 02/12/1999 02/05/1999 SUSQUEHANNA - UNIT 2.
TRM / LOES-6 EFFECTIVE DATE 02/21/2003 SUSQUEHANNA -UNIT 2, TRM / LOES-6 EFFECTIVE DATE 02/21/003
PL-NF-01-001 Rev. 1 Page 1 of 29 Susquehanna SES Unit 2 Cycle 11 CORE OPERATING LIMITS REPORT Nuclear Fuels Engineering November 2002 pp EFFECTIVE DATE 02/21/03 SUSQUEHANNA UNIT 2 TRM / 3.2-2
PL-NF-01 -001 Rev. 1 Page 2 of 29 CORE OPERATING LIMITS REPORT REVISION DESCRIPTION INDEX Rev.
Affected No.
Sections Description/Purpose of Revision Issuance of this COLR is in support of Unit 2 Cycle 11 operation. This COLR should be used for compliance with Technical Specifications.
The COLR was revised to support the Unit 2 Cycle 11 extended cycle burnup from the original burnup of 16,759 MWD/MTU to 17,300 MWD/MTU.
This revision reflects the small increase in MCPR Operating Limits as determined by the revised licensing analyses and shown in Figure 5.2-1, Figure 5.2-2, Figure 5.2-3, Figure 5.2-4, Figure 8.2-2, Figure 8.2-3, Figure 8.2-4, and Figure 8.2-5.
This revision incorporates a new Section 9.0, References.
FORM NFP-QA-008-2, Rev. 1 SUSQUEHANNA UNIT 2 EFFECTIVE DATE 02/21/03 0
1 ALL ALL I
I TRM / 3.2-3
PL-NF-01 -001 Rev. 1 Page 3 of 29 SUSQUEHANNA STEAM ELECTRIC STATION Unit 2 Cycle 11 CORE OPERATING LIMITS REPORT Table of Contents
1.0 INTRODUCTION
4 2.0 DEFINITIONS.....................................................................................................
5 3.0 SHUTDOWN MARGIN............................................................................................
6 4.0 AVERAGE PLANAR LINEAR HEAT GENERATION RATE (APLHGR)................... 7 5.0 MINIMUM CRITICAL POWER RATIO (MCPR).......................................................
9 6.0 LINEAR HEAT GENERATION RATE (LHGR).........................................................
15 7.0 AVERAGE POWER RANGE MONITOR (APRM) GAIN AND SETPOINTS............. 18 8.0 RECIRCULATION LOOPS - SINGLE LOOP OPERATION.....................................
21
9.0 REFERENCES
28 EFFECTIVE DATE 02/21/03 TRM / 3.2-4 SUSQUEHANNA UNIT 2
PL-NF-01 -001 Rev. 1 Page 4 of 29
1.0 INTRODUCTION
This CORE OPERATING LIMITS REPORT for Susquehanna Unit 2 Cycle 11 is prepared in accordance with the requirements of Susquehanna Unit 2, Technical Specification 5.6.5. As required by Technical Specifications 5.6.5, core shutdown margin, the core operating limits and APRM setpoints presented herein were developed using NRC-approved methods and are established such that all applicable limits of the plant safety analysis are met.
EFFECTIVE DATE 02/21/03 TRM / 3.2-5 SUSQUEHANNA UNIT 2
PL-NF-01-001 Rev. 1 Page 5 of 29 2.0 DEFINITIONS Terms used in this COLR but not defined in Section 1.0 of the Technical Specifications or Section 1.1 of the Technical Requirements Manual are provided below.
2.1 The AVERAGE BUNDLE EXPOSURE shall be equal to the total energy produced by the bundle divided by the total initial weight of uranium in the fuel bundle.
2.2 The AVERAGE PLANAR EXPOSURE at a specified height shall be equal to the total energy produced per unit length at the specified height divided by the total initial weight of uranium per unit length at that height.
2.3 The FRACTION OF LIMITING POWER DENSITY (FLPD) shall be the LHGR existing at a given height divided by the applicable LHGR for APRM Setpoint Limit for that bundle type.
2.4 The FRACTION OF RATED THERMAL POWER (FRTP) shall be the measured THERMAL POWER divided by the RATED THERMAL POWER.
2.5 FDLRX is the ratio of the maximum LHGR calculated by POWERPLEX-II for each fuel bundle divided by the LHGR limit for the applicable fuel bundle type.
2.6 MFLCPR is the ratio of the applicable MCPR operating limit for the applicable fuel bundle type divided by the MCPR calculated by POWERPLEX-II for each fuel bundle.
2.7 MAPRAT is the ratio of the maximum APLHGR calculated by POWERPLEX-II for each fuel bundle divided by the APLGHR limit for the applicable fuel bundle type.
2.8 FDLRC is the ratio of the maximum LHGR calculated by POWERPLEX-II for each fuel bundle divided by the LHGR for APRM Setpoint Limit for the applicable fuel bundle type.
EFFECTIVE DATE 02/21/03 SUSQUEHANNA UNIT 2 TRM / 3.2-6
PL-NF-01 -001 Rev. 1 Page 6 of 29 3.0 SHUTDOWN MARGIN 3.1 Technical Specification Reference Technical Specification 3.1.1 3.2 Descridtion The SHUTDOWN MARGIN shall be equal to or greater than:
a) 0.38% Ak/k with the highest worth rod analytically determined OR I) 0.28% Ak/k with the highest worth rod determined by test Since core reactivity will vary during the cycle as a function of fuel depletion and poison burnup, Beginning of Cycle (BOC) SHUTDOWN MARGIN (SDM) tests must also account for changes in core reactivity during the cycle. Therefore, the SDM measured at BOC must be equal to or greater than the applicable requirement from either 3.2.a or 3.2.b plus an adder, "R". The adder, "R", is the difference between the calculated value of maximum core reactivity (that is, minimum SDM) during the operating cycle and the calculated BOC core reactivity. If the value of "R" is zero (that is, BOC is the most reactive point in the cycle) no correction to the BOC measured value is required.
The SHUTDOWN MARGIN limits provided in 3.2a and 3.2b are applicable in MODES 1, 2, 3,4, and 5. This includes core shuffling.
EFFECTIVE DATE 02/21/03 SUSQUEHANNA UNIT 2 TPRM / 3.2-7
PL-NF-01 -001 Rev. 1 Page 7 of 29 4.0 AVERAGE PLANAR LINEAR HEAT GENERATION RATE (APLHGR) 4.1 Technical Specification Reference Technical Specification 3.2.1 4.2 Description The APLHGRs for SPC ATRIUMTm-10 fuel shall not exceed the limit shown in Figure 4.2-1.
The APLHGR limits in Figure 4.2-1 are valid for Main Turbine Bypass Operable and Inoperable and EOC-RPT Operable and Inoperable in Two Loop operation.
The APLHGR limits for Single Loop operation are provided in Section 8.0.
EFFECTIVE DATE 02/21/03 TRM / 3.2-8 SUSQUEHANNA UNIT 2
(
SSES UNIT 2 CYCLE 11 m
~~12 0.0,11.5 15000,11.5 REFERENCE T.S. 3.2.1 SI I I I
I l
I I
l I
I I
I I
l I
H.
H E...
4"..
. USE IN DE E MNNGM P A......
(D m
- 359400,6.7:
6 6................
S/..
0
- I l
l v
I I
I I S P S l
ilI I S
I I
" I S l S l
i lle II S
I I I S l I I
e II SfII I
UP '
e I Il S II I
' I S l I I
III S
I I
S S
S S
S S
I U
I U
S I
S S
S I
I I
S S
I S
I I
I I
I I
I I
r SS o
I I
S I
S I
I S
I l
I I
I S
S I
I I
S I
I S I U
i o
I i
e S
5 m
0 10000 20000 30000 40000 50000 60000 70000 Average Planar Exposure (MWD/MTU)
AVERAGE PLANAR LINEAR HEAT GENERATION RATE LIMIT VERSUS w
~~AVERAGE PLANAR EXPOSURE TWO LOOP OPERATION C
SPC ATRIU
'10 FUEL a
FIGURE 4.2-16 i
q II I
ll I
I Il iIe eq° qI ffI P
Il eIl I
- II e
9I P
Il el Il0
PL-NF-01-001 Rev. 1 Page 9 of 29 5.0 MINIMUM CRITICAL POWER RATIO (MCPR) 5.1 Technical Specification Reference Technical Specification 3.2.2, 3.7.6, and 3.3.4.1 5.2 Description The MCPR limit is specified as a function of core power, core flow, average scram insertion time per Section 5.3 and plant equipment operability status. The MCPR limits for all fuel types (SPC ATRIUMTM-10) shall be the greater of a)
The Flow-Dependent MCPR value determined from Figure 5.2-1: BOC to EOC OR b)
The Power-Dependent MCPR value determined from one of the following figures, as appropriate:
Figure 5.2-2: EOC-RPT and Main Turbine Bypass Operable from BOC to EOC Figure 5.2-3: Main Turbine Bypass Inoperable / EOC-RPT Operable from BOC to EOC Figure 5.2-4: EOC-RPT Inoperable / Main Turbine Bypass Operable from BOC to EOC The MCPR limits in Figures 5.2-1 through 5.2-4 are valid for Two Loop operation.
The MCPR limits for Single Loop operation are provided in Section 8.0.
5.3 Avera-ge Scram Time Fraction Table 5.3-1 provides the relationship between average scram time to control rod position and scram time fraction. The evaluation of scram insertion time data, as it relates to the attached table should be performed per Reactor Engineering procedures.
EFFECTIVE DATE 02/21/03 TRM / 3.2-10 SUSQUEHANNA UNIT 2
(
- i=.* INIT 2 CYCLE 11
.1.
1 4
C-P1
- 6 SSE UNT2CCE1
.1.
.4
- 4.
4 I
4 4
I I
I I
(60,1.58)
I I
LEGEND CURVE A: MAXIMUM ALLOWABLE AVERAGE SCRAM INSERTION TIME CURVE B: REALISTIC AVERAGE SCRAM INSERTION TIME USED IN DETERMINING MFLCPR 1
I
~
t S-
_I I
REFERENCE:
T.S. 3.2.2 4 4(87 I,,-,
-4 H-(98,1.54) 55
__ _ _ _ __ _ _I
.1,1.45)
I
.1 I
I I
I 40 I
1 100 60 50 70 80 90 Total Core Flow (MLBIHR)
MCPR OPERATING LIMIT VERSUS TOTAL CORE FLOW TWO LOOP OPERATION (BOC TO EOC)
FIGURE 5.2-1 C
2.2 2.1 4
I 2.0 1.9
.1.8 1.7
- 0.
CL 1.6
-(30,1.65)
C..,
1.5 1.4 1.3 nr
-rn I-I'1 m
C) m 1.2 30 CD A
(108,1.52)
B -
(108,1.45) 110
-0 Co (D
0 r23 "O0 Fz 71 0 _.L 6
I l
0 100
C SSES UNIT 2 CYCLE 11 30 40 50 60 70 80 90 I(100,1.52)
(100,1.45) 100 Core Power (% RATED)
MCPR OPERATING LIMIT VERSUS CORE POWER
.D EOC-RPT AND MAIN TURBINE BYPASS OPERABLE TWO LOOP OPERATION (BOC TO EOC)
FIGURE 5.2-2 0
C
(.A (A
"r-rQ Ho N,
3.0 2.9 2.8 2.7 2.6 2.5 2.4
":3 2.3 S2.2 "02.1 0
- o. 2.0 C) 1.v 1.8 1.7 1.6 1.5 1.4 1.3 rP -n
"!"1 C-n m
_q N3 I--h O
ci 20
C 3.0 2.9 2.8 2.7 2.6 2.5 30 40 50 60
(./
1--
SSES UNIT 2 CYCLE 11 I
I
- I
_LEGEND CURVE A: MAXIMUM ALLOWABLE AVERAGE SCRAM INSERTION TIME (25,2.58)
CURVE B: REALISTIC AVERAGE SCRAM INSERTION TIME
________USED IN DETERMINING MFLCPR (40.6,2.02)
A B
(72,1.71)
REFERENCE:
T.S. 3.7.6 and 3.2.2L Iuu Core Power (% RATED)
MCPR OPERATING LIMIT VERSUS CORE POWER MAIN TURBINE BYPASS INOPERABLE / EOC-RPT OPERABLE TWO LOOP OPERATION (BOC to EOC)
FIGURE 5.2-3
(
(100,1.71)
._2.4 2.3
- 2.2 2
0 S2.0 1.9 1.8 1.7 1.6 1.5 1.4 1.3 20
ft CA r'
n
-In M
C-)
Ph CA)
N:)
-u ID
(.D (0
"6 C3
.-A 9U 80 70
(
(A (j')
m N3 H2 Ci 30 40 50 60 70 80 3.0 2.9 2.8 2.7 2.6 2.5 2.4 "Zi 2.3 2.2 0- 2.1 0
0.2.0 1.9 100 Core Power (% RATED)
MCPR OPERATING LIMIT VERSUS CORE POWER EOC-RPT INOPERABLE I MAIN TURBINE BYPASS OPERABLE TWO LOOP OPERATION (BOC to EOC)
FIGURE 5.2-4 K
SSES UNIT 2 CYCLE 11 LEGEND CURVE A: MAXIMUM ALLOWABLE AVERAGE SCRAM INSERTION TIME*
CURVE B: REALISTIC AVERAGE SCRAM INSERTION TIME (25,2.51)
ZUSED IN DETERMINING MFLCPR j (40.6,1.87)
B
(
REFERENCE:
T.S. 3.3.4.1 and 3.
-75,1.59)_
1.8 1.7 1.6 1.5 1.4 1.3 (100,1.59) m
-n
-n m
m CD, P1 1-=,
r*o CA3 20
...D CD (0
CD oD, ro co
,rz 6
0 0 90
.A
PL-NF-01-001 Rev. 1 Page 14 of 29 Table 5.3-1 Average Scram Time Fraction Table For Use With Scram Time Dependent MCPR Operating Limits Control Rod Average Scram Time to Position (seconds)
Position 45 0.470 0.480 0.490 0.500 0.510 0.520 39 0.630 0.676 0.722 0.768 0.814 0.860 25 1.500 1.582 1.664 1.746 1.828 1.910 5
2.700 2.848 2.996 3.144 3.292 3.440 Scram Time 0.000 0.200 0.400 0.600 0.800 1.000 Fraction Average Scram Realistic Maximum Insertion Time Allowable EFFECTIVE DATE 02/21/03 SUSQUEHANNA UNIT 2 TRM / 3.2-15
PL-NF-01-001 Rev. 1 Page 15 of 29 "6.0 LINEAR HEAT GENERATION RATE (LHGR) 6.1 Technical Specification Reference Technical Specification 3.2.3 and 3.7.6 6.2 Description The LHGR limits are specified below as a function of Main Turbine Bypass operability for each fuel type as follows:
Main Turbine Bypass Operable The LHGR for SPC ATRIUMTM-10 fuel shall not exceed the LHGR limit determined from Figure 6.2-1.
Main Turbine Bypass Inoperable The LHGR for SPC ATRIUMTM-10 fuel shall not exceed the LHGR limit determined from Figure 6.2-2.
The LHGR limits in Figures 6.2-1 and 6.2-2 are valid for Two Loop and Single Loop operation.
EFFECTIVE DATE 02/21/03 TRM / 3.2-16 SUSQUEHANNA UNIT 2
S 1SSES UNIT 2 CYCLE 11 S
16 -
I i
i i
i ii e
i i
I e
I I
i i
i e
i I
i i
i i
I I
.0 S
S S
I S
"m SAFETY ANALYSES ASSUME THAT AT LEAST FOUR BYPASS VALVES ARE OPERABLE PER SR 3.7.6.1 AND
- 3.7.6.2 I
I S S
I I
I I
S I
- 14.
I C>
14 0.0,13.4 1:
15000.0,13.4
- iiiIn n.Te22 i'
I I
S I
I
-.I T S 3 2~ *.
SII I
I I
I 12-USED IN DETERMINI..
I....
- I I
I I
I I
I I
I I
I I
i i
I I
I i
i i
I i
i i
i I
i i
i I
I i
S S
I...,.-
III I
I I
I I
I I
I I
S I
I I
I I
I S
I S
S I
I I
I I
I S
I I
I S
1 I
e I
S e
5 i
e I
I
.p.m.
...~....~.....J..J....
t....
J.. S..
.L.......
S*
i i
i I
I I
i i
I i
I I
I i
I I
i i
i I
i I
I i
'-4iIii i
I I
i I
S i
I S
I I
I i S
i i
I U
S i
I I
I i
I I
S
- I I
e ii S
I i
S I
I i
I i
I S
I S
S I
I S
I I
I I
i i
4 I
I I
5 I
I I
I I
I 5
I I
CD 0
10000 20000 30000 40000 50000 60000 70000 Average Planar Exposure (MWDIMTU) c:1 LINEAR HEAT GENERATION RATE LIMIT VERSUS AVERAGE PLANAR EXPOSUREn MAIN TURBINE BYPASS OPERABLE&
SPC ATRIUMTM.10 FUEL 6~
FIGURE 6.2-1 t
t e
i I
I I
SAFETY ANALYSES ASSUME THAT TWO OR MORE BYPASS
)>
VALVES ARE INOPERABLE PER SR 3.7.6.1 OR 3.7.6.2 14 o
,n 1
h5
-,14 -- -- -.-.-.
I.......
F..
REFERENCE:
T.S. 3.2.3 and 3.7.6 0.0,13.0,
15000.0,13.0 I
e i
i
- USED IN DETERMINING FDLRX 12 10-.--, 6--,
-A.,
0 )
S U
U S
S 5
5 S
8 5
5
- J S
L
. 1 5
co.
16 e
.i,.
J..
J.
.J.d 6
i..
L
.o---*-
o
.I 1
- °..................j..S L..
i SI l*
I S~
SI II*
I S
S S* I S
S I S S
S U
S I
S S
S I
I I
5 5
5 5
5 5
I I
O I
S I
I I
I I
5 I
I I 5 5
5 8
I U
S I
I.,..)I I S S
S S
S S
I I
S S
S SI I
S S
I S
I U
U S
S A verage Plana E*x r
.M DI.
U )...
- m.
MAINag TUanrBIExpsr BYPASS INPRAL mo "
N) o
(
TUBN BYPASSi
- INOPERABL SPC ATRIUMT.10 FUEL 0
FIGURE 6.2-2
PL-NF-01-001 Rev. 1 Page 18 of 29 7.0 AVERAGE POWER RANGE MONITOR (APRM) GAIN AND SETPOINTS 7.1 Technical Specification Reference Technical Specification 3.2.4 and 3.3.1.1 7.2 Description The APRM flow biased simulated thermal power-upscale scram trip setpoint (S) and flow biased neutron flux-upscale control rod block trip setpoint (SRB) shall be established as specified in Table 7.2-1 and Table 7.2-2, including any adjustments per Technical Specification LCO 3.2.4.
Technical Specification LCO 3.2.4 provides an option to adjust the APRM setpoints when MFLPD is greater than FRACTION OF RATED THERMAL POWER (FRTP). The adjustment applies to both the APRM flow biased simulated thermal power-upscale scram trip setpoint and flow biased neutron flux-upscale control rod block trip setpoint for Two Loop and Single Loop operation. The APRM setpoints for Specification 3.2.4 are established in Tables 7.2-1 and 7.2-2.
EFFECTIVE DATE 02/21/03 SUSQUEHANNA UNIT 2 TRM / 3. 2 -19
PL-NF-01-001 Rev. 1 Page 19 of 29 Table 7.2-1 APRM Setpoint for Two Loop Operation Trip Setpoint Allowable Value S
(0.58W + 59%) T S _ (0.58W + 62%) TI SRB < (0.58W + 50%) T SRB5 ( 0.58W + 53%) T Table 7.2-2 APRM Setpoint for Single Loop Operation Trip Setpoint Allowable Value S _5 (0.58W + 54%) T S:5 _(0.58W + 57%) T' SRB --
5 (0.58W + 45%) T SRB
( 0.58W + 48%) T where: S and SRB are in percent of RATED THERMAL POWER W =
Loop recirculation flow as a percientage of the loop recirculation flow which produces a core flow of 100 million lbs/hr T =
Lowest value of the ratio of FRTP divided by the MFLPD 2. The FLPD is the actual LHGR divided by the applicable LHGR limit for APRM Setpoints. The LHGR limit for APRM setpoints for SPC ATRIUMTM-1 0 fuel shall be taken from Figure 7.2-1.
The LHGR for APRM setpoint limits in Figure 7.2-1 are valid for Main Turbine Bypass Operable and Inoperable and EOC-RPT Operable and Inoperable for both Two and Single Loop operation.
For calculated T-values greater than 1.0, a ratio of 1.0 is used in the above equations.
1 APRM flow biased simulated thermal power-upscale scram allowable value in this table is equal to the value established in Technical Specification 3.3.1.1.
2 For the calculation of T, the value of MFLPD shall be the maximum value of FDLRC.
EFFECTIVE DATE 02/21/03 TRM / 3.2-20 SUSQUEHANNA UNIT 2
PL-NF-01-001 Rev. 1 Page 20 of 29
........~ l..
O 4I I
I'*......I..
0
.IA
- j...
I L
I..I.....*
i.....
b' ILM I..
I..
a I
a a
I l
I a
II i
I
" l. l 0.......
C a
a a 1 I
0
/
z I
I I
a I
a a
S.........
Ji..
II IZ*
e I-I L
iI.
a II Ialll a
a IIl l
a I
a a
I iiII
'7....
I a
I I
a I
a
.o--..--------------
Li....
J
.1 S
a a
a a
- e a
a a
a a
a e
a 1
a
!aI i
ia1 1
a i.iii a*
I a
I a1II a
i l
a a
a i
i a
i i
a i
a a
a q
a a
l i
a a
a a
iiII a
a a
a a
a a
a a
a I
a I
I I*
i
IIl*
a I
a a
I I
a I I
a S
I a
a a
a a
a a..*..
S a
a
...... 0..
.l I
)
a a
a a
I I
a a
a a
t-1
£0 (Wm-/) SiulodjoS IW::dV o10 I!wl1l eGleu uOlleJeuOE) 1UH JeUul'I 0.
0 0
CD z
IL CD 40 U) m
)
CD CD 0
SI--
4 LL
- 0.
a L
cm 2 CD0 CD 0
04 LLI z Lu C) 0D Lu z
0 to SUSQUEHANNA UNIT 2 TRM / 3.2-21 EFFECTIVE DATE 02/21/03 uJ
-J) 0 cl)
.cl
PL-NF-01-001 Rev. 1 Page 21 of 29 8.0 RECIRCULATION LOOPS - SINGLE LOOP OPERATION 8.1 Technical Specification Reference Technical Specification 3.2.1, 3.2.2, 3.2.3, 3.3.4.1, 3.4.1, and 3.7.6 8.2 Description APLHGR The APLHGR limit for SPC ATRIUMT -10 fuel shall be equal to the APLHGR Limit from Figure 8.2-1.,
The APLHGR limits in Figure 8.2-1 are valid for Main Turbine Bypass Operable and Inoperable and EOC-RPT Operable and Inoperable in Single Loop operation.
Minimum Critical Power Ratio Limit The MCPR limit is specified as a function of core power, core flow, and plant equipment operability status. The MCPR limit for all fuel types (SPC ATRIUM'm-10) shall be the greater of:
a)
Flow-Dependent MCPR value determined from Figure 8.2-2 OR b)
The Power-Dependent MCPR value determined from one of the following figures, as appropriate:
Figure 8.2-3: EOC-RPT and Main Turbine Bypass Operable from BOC to EOC Figure 8.2-4: Main Turbine Bypass Inoperable / EOC-RPT Operable from BOC to EOC Figure 8.2-5: EOC-RPT Inoperable I Main Turbine Bypass Operable from BOC to EOC The MCPR limits in Figures 8.2-2 through 8.2-5 are valid only for Single Loop operation.
Linear Heat Generation Rate Limit The LHGR limits for Single Loop Operation are defined in Section 6.0.
EFFECTIVE DATE 02/21/03 SUSQUEHANNA UNIT 2 TRM / 3.2-22
PL-NF-01-001 Rev. 1 Page 22 of 29 Avera-ae Power Range Monitor (APRM) Gain And Setpoints APRM setpoints and the LHGR limit for APRM setpoints for Single Loop operation are defined in Section 7.0.
EFFECTIVE DATE 02/21/03 SUSQUEHANNA UNIT 2 TRM / 3.2-23
c c
a
- a.
a a
a a
a a 0
.1
.I LI w
a a
a a
a a
IC) 4 -
a a
a a
a a
a
- S..L I
I III a
I a
a a
ii a
a i
a i
a e 4~ -----
III II a
a l
a°I Ia a°I a
I I
a a~l a
II a
I*
I 1
. 4~-
4....
Sal a
a a
I i
I a
a aC I
a I
a a
a a
a a
a a
a a
a a
a i
a I
aI a
a a
aIIl a
I a
III i
i i
i a
a i
a a
a a
a a
- a.
a a
a a
a a
a a
a a
a i
.a
.a a
a a
a a
a a
a a
ia a
a a.a
..a
.a a
./
- a.
a
- a.
.a.
j J.IlI III lI III J
II II II I
I I
I I° a
a a
a a
a a
a a aa a
aai d
I I
N
- I W
II*
a a
a a
a a
a a
a ap
-- a a
a a
a..
I 0
I.
l I
i IIIIIIIi I
I a
a I I a
a a~
a a
a III a a oa a
- a.
a
.a
.a l
iII I
I uI I
.II a
a a
a a
a a
a a
a a
a° a
a a
a a
a a
a.
I-a M) co
'-B
(:91J/)
11W!,,
el0Bl UO!IJOUOD eI-JeHull JDUeld OBeJOAV PL-NF-.01-001 Rev. 1 Page 23 of 29 0
U) 0 a
- 0.
x Co CD_
- 0)
CD CT" uli Cn 0n 0~
z
-I 0 wu C,
wz E
-j I0~
!R.
ui 4
z 4
a U)
SUSQUEHANNA UNIT 2 TRH / 3.2-24 EFFECTIVE DATE 02/21/03 w
-j 0m 0
cmJ uJ Ci)
Co 0N
(
SSES UNIT 2 CYCLE 11 tz~
I,,
--I
--I U'1 m
"-n I"1" C-)
-I I--I P1 2.6 2.5 2.4 2.3
- 0)
S2.2 0.
CL 0
- a.
0
- 2.1 2.0 1.9 1.8 A
REFERENCE:
T.S. 3.4.1 and 3.2.2 40 50 B
70 60 USED IN DETERMINING MFLCPR 4
i i
timn 80 90 Total Core Flow (Mlbml/hr)
MCPR OPERATING LIMIT VERSUS TOTAL CORE FLOW SINGLE LOOP OPERATION (BOC to EOC)
FIGURE 8.2-2 C
I I
II T
V Sm EUHV
.4 1
9 4
4 4
I I
D A: MAXIMUM ALLOWABLE AVERAGE SCRAM INSERTION TIME B: REALISTIC AVERAGE SCRAM INSERTION TIME (30,2.20) 4.
30
,2.20) 110 co
"(D z
ro TiO 0
C0 100 I
BJ AJ
%.vw
C
(
SSES UNIT 2 CYCLE 11 30 40 50 60 70 80 90 100 Core Power (% RATED)
MCPR OPERATING LIMIT VERSUS CORE POWER EOC-RPT AND MAIN TURBINE BYPASS OPERABLE SINGLE LOOP OPERATION (BOC to EOC)
FIGURE 8.2-3
-u D -u z
-~0 O1'0 CD
(*
C-,)
(A P1
'-4 "3
3.5 3.4 3.3 3.2 3.1 3.0 2.9
..Im
- 0) 2.8 S2.7
- 0.
0. 2.6
- 2.
e;2.5
.1 2.4 2.3 2.2 2.1 2.0 1.9 20 r\\3 "I"I "1N C.0
'I""
--I r,o
C' f/1 JCD Li-C1 m
2.4 2.3 (40.6,2!.37)(
0 2.1 A
B 2.2
. (54.8,2.20) 2.0
REFERENCE:
T.S. 3.4.1,3.7.6, and3.2.2 1.9 I
I 20 30 40 50 60 70 80 90 100 Core Power (% RATED)
MCPR OPERATING LIMIT VERSUS CORE -POWER MAIN TURBINE BYPASS INOPERABLE / EOC-RPT OPERABLE SINGLE LOOP OPERATION (BOC to EOC)
FIGURE 8.2-4 0,2.20)
(U SSES UNIT 2 CYCLE 11 3.5 3.4 3.3 3.2 3.1 3.0 2.9 2.8 2.7 2.6 2.5 LEGEND CURVE A: MAXIMUM ALLOWABLE AVERAGE SCRAM INSERTION TIME CURVE B: REALISTIC AVERAGE SCRAM INSERTION TIME (25,3.02)
-USE'D IN DETERMINING MFLCPR E
0J 01
- 0.
o
'F C,,
m
-1
-I1 I"1" m
C)
P1 NJ c:)
cAi
-v z -n 6
6 "0
-A
"(:0 (D
- 0)
- 0.
-4, (0
I
\\
SSES UNIT 2 CYCLE 11 CA 3.5 C=
3.4 1
3.3 LEGEND 3.2 CURVE A: MAXIMUM ALLOWABLE AVERAGE SCRAM 31 INSERTION TIME I--,4-'*3.1 30 2CURVE B: REALISTIC AVERAGE SCRAM INSERTION TIME 3.0
"'(25,2.93)"____
S2.9 mI n2.8
- d.
co O
SI:2
.6 2 2.5 2.4 2,3 rn 2.2 (100,2.20)
"-2.1 (39.9,2.20) 21 I
m 2.0-
REFERENCE:
T.S. 3.4.1, 3.3.4.1, and 3.2.2
>1 1.9 m
20 30 40 50 60 70 80 90 100 Core Power (% RATED)
MCPR OPERATING LIMIT VERSUS CORE POWER EOC-RPT INOPERABLE I MAIN TURBINE BYPASS OPERABLE SINGLE LOOP OPERATION (BOC to EOC)
FIGURE 8.2-5 "Co <0" CD Z
(D
PL-NF-01-001 Rev. 1 Page 28 of 29
9.0 REFERENCES
9.1 The analytical methods used to determine the Unit 2 Cycle 11 core operating limits were previously reviewed and approved by the NRC. In accordance with the Susquehanna Unit 2, Technical Specification 5.6.5, these methods are described in the following documents:
- 1.
PL-NF-90-001 -A, "Application of Reactor Analysis Methods for BWR Design and Analysis," July 1992.
- 2.
PL-NF-90-001, Supplement 1-A, "Application of Reactor Analysis Methods for BWR Design and Analysis: Loss of Feedwater Heating Changes and Use of RETRAN MOD 5.1," August 1995.
- 3.
PL-NF-90-001, Supplement 2-A, "Application of Reactor Analysis Methods for BWR Design and Analysis: CASMO-3G Code and ANFB Critical Power Correlation," July 1996.
- 4.
XN-NF-79-71 (P)(A) Revision 2, Supplements 1, 2, and 3, "Exxon Nuclear Plant Transient Methodology for Boiling Water Reactors," March 1986.
- 5.
XN-NF-80-19(A), Volume 1, and Volume 1 Supplements 1 and 2 (March 1983), and Volume 1 Supplement 3 (November 1990), "Exxon Nuclear Methodology for Boiling Water Reactors: Neutronic Methods for Design and Analysis," Exxon Nuclear Company, Inc.
- 6.
XN-NF-80-19(P)(A), Volumes 2, 2A, 2B, and 2C, "Exxon Nucear Methodology for Boiling Water Reactors: EXEM BWR ECCS'Evaluation Model," September 1982.
- 7.
XN-NF-80-19(P)(A), Volume 3 Revision 2, "Exxon Nuclear Methodology for Boiling Water Reactors Thermex: Thermal Limits Methodology Summary Description," January 1987.
- 8.
XN-NF-80-19(P)(A), Volume 4, Revision 1, "Exxon Nuclear Methodology for Boiling Water Reactors: Application of the ENC Methodology to BWR Reloads," Exxon Nuclear Company, Inc., June 1986.
- 9.
XN-NF-85-67(P)(A), Revision 1, "Generic Mechanical Design for Exxon Nuclear Jet Pump BWR Reload Fuel," Exxon Nuclear Company, Inc.,
September 1986.
- 10.
ANF-524(P)(A), Revision 2 and Supplement 1, Revision 2, "Advanced Nuclear Fuels Corporation Critical Power Methodology for Boiling Water Reactors," November 1990.
- 11.
ANF-89-98(P)(A) Revision 1 and Revision 1 Supplement 1, "Generic Mechanical Design Criteria for BWR Fuel Designs," Advanced Nuclear Fuels Corporation, May 1995.
EFFECTIVE DATE 02/21/03 SUSQUEHANNA UNIT 2 TRM / 3.2-29
PL-NF-01-001 Rev. 1 Page 29 of 29
- 12.
ANF-91-048(P)(A), OAdvanced Nuclear Fuels Corporation Methodology for Boiling Water Reactors EXEM BWR Evaluation Model," January 1993.
- 13.
NE-092-001A, Revision 1, "Licensing Topical Report for Power Uprate With Increased Core Flow," Pennsylvania Power & Light Company, December 1992, and NRC SER (November 30, 1993).
- 14.
Caldon, Inc., 'TOPICAL REPORT: Improving Thermal Power Accuracy and Plant Safety While Increasing Operating Power Level Using the LEFM"'Tm System," Engineering Report - 80P, March 1997.
- 15. Caldon, Inc., "Supplement to Topical Report ER-80P: Basis for a Power Uprate with the LEFMm or LEFM CheckPlusm System," Revision 0, Engineering Report ER-1 60P, May 2000.
- 16.
EMF-1 997(P)(A) Revision 0, 'ANFB-1 0 Critical Power Correlation,"
July 1998, and EMF-1997(P)(A) Supplement 1 Revision 0, "ANFB-10 Critical Power Correlation: High Local Peaking Results," July 1998.
- 17.
EMF-85-74(P), "RODEX2A (BWR) Fuel Rod Thermal-Mechanical Evaluation Model," Revision 0, Supplements 1 and 2, February 1998.
EFFECTIVE DATE 02/21/03 SUSQUEHANNA UNIT 2 TP, / 3.2-30