Text

Software Validation Test Procedure for Prom P/N 94095603 G-M Area Monitor
	ML023220323
Person / Time
Site:	Ginna
Issue date:	10/28/2002
From:	; Syncor Radiation Management
To:	; Office of Nuclear Reactor Regulation
References
	91095603VTP, Rev 1
	Download: ML023220323 (246)
	v • d • e

10/28/02 05:SBpm P. 004 4403491927 4405491927 10/28/02 0S:SSpm P. 004 IINNYISION NOVISION SOFTWARE VALIDATIiON TEST PROCEDURE FOR PROM PIN 94095603 G-M AREA MONITOR REV. LEVEL ECN # DESCRIPTION/PAGES AFFECTED 1 3076 Initial Release ENGINEERING DATE /

MANUFACTURING -. DATE /0rZ.

nUALITY'ASSURANCE -____DATED., "'

DATE 10123102 TITLE S' WARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT I1012/02 PROCEDURE, 94095603 DOC CTRL SHEET NO. 4 SIZE REV ECN NO. RELEASED FOR 3076 PRODUCTION 1 of 246 PLN 1

1 "Tableof Contents Section Description Page Test Plan 1.1 Test Plan Identifier ........................................................................... 4 "1.2 Introduction ................................................................................. 4 1.3 Test Items ................................................................................... 5 1.4 Features to be Tested ..................................................................... 5 1.5 Features Not to be Tested ................................................................ 5 1.6 Approach .................................................................................. 5 1.7 Item Pass/Fail Criteria ............................................................. .... 6 1.8 Suspension Criteria and Resumption Requirements ..................................... 6 1.9 Test Deliverables ......................................................................... 6 1.10 Test Tasks ..................................................................................... 7 1.11 Environmental Needs ...................................................................... 7 1.12 Responsibilities ............................................................................. 8 1.13 Staffing and Training ...................................................................... 8 1.14 Schedule .................................................................................... 8 1.15 Risks and Contingencies ................................................................... 8 2 Test Design Description ............................................................................... 9 2.1 Test Design Specification Identifier ............................................................ 9 2.2 Features to be Tested ....................................................................... .. 9 2.3 Approach Refinements ....................................................................... .9 2.4 Test Identification ........................................................................... 11 2.5 Feature Pass/Fail Criteria .................................................................. ... 11 3 Test Case Description ............................................................................... 12 3.1 Test Case Specification Identifier ............................................................. 12 3.2 Test Items ....................................................................................... 12 3.3 Input Specifications ........................................................................... 12 3.4 Output Specifications .............................................................................. 12 3.5 Environmental needs ........................................................................ .... 12 3.5.1 Hardware ............................................................................... 12 3.5.2 Software ................................................................................. 12 3.5.3 Other environmental requirements ................................................. 12 4 Test Procedure ...................................................................................... 13 4.1 Test Procedure Identifier ....................................................................... 13 4.2 Purpose ........................................................................................... 13 4.3 Procedure Steps ................................................................................. 13 DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT- - ......PROCEDURE,-9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 40 6 0 3VPLN 1 3076 PRODUCTION 2of 246

~

5 Test Item Transmittal .................................................................................. 188 5.1 Transmittal Report Identifier ..................................................................... 188 5.2 Transmitted Items .................................................................................. 188 5.3 Location ............................................................................................. 188 5.4 Status ................................................................................................ 188 6 Test Log .................................................................................................. 189 6.1 Transmittal Report Identifier ..................................................................... 189 6.2 Description .......................................................................................... 189 6.3 Activities and Event Entries ...................................................................... 189 6.4 Execution Description .............................................................................. 189 6.5 Procedure Results .................................................................................. 189 6.6 Environmental Information ....................................................................... 245 6.7 Anomaly Events .................................................................................... 245 6.8 Incident Report Identifiers ........................................................................ 245 7 Test Incident Report ..................................................................................... 246 7.1 Test Incident Report Identifier .................................................................... 246 7.2 Summary ............................................................................................. 246 7.3 Incident Description ................................................................................ 246 7.4 Impact ................................................................................................ 246 7.5 Resolution ............................................................................................ 246 DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT - '102 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION 9W.4f 3 of 246 PLN

1 Test Plan 1.1 Test Plan Identifier 1.1.1 94095603VTP Software Test Procedure for PROM P/N 94095603, Rev. 2.

1.2 Introduction 1.2.1 A function test plan for the PROM PIN 94095603, Rev.2, supports the following objectives:

1.2.1.1 To detail the activities required to prepare for and conduct the functional test.

1.2.1.2 To communicate to all responsible parties the tasks which they are to perform and the schedule to be followed in performing the tasks 1.2.1.3 To define the sources of the information used to prepare the plan.

1.2.1.4 To define the test tools and environment needed to conduct the functional test.

1.2.2 Background 1.2.3.1.1 The Victoreen Model 955A is a single-channel area radiation monitoring system is capable of operating over a 5 decade range.

The 94095603 PROM is configured to operate between 0.01 mR/h and 1.00E3 mR/h. The range is a function of the detector used. User adjusted set points are provide to implement other detector ranges available. The system monitors gamma radiation and provides indication when the radiation level decreases below a fail threshold, exceeds a warn set point, exceeds a high set point, or exceeds an over range set point.

1.2.3 Scope 1.2.3.1.2 This test plan covers a full function test of the PROM P/N 94095603 Rev. 2. This includes operator and user procedures. In addition recovery and performance will also be evaluated.

1.2.4 References 1.2.4.1 Software V&V Plan for PROM P/N 94095603 G-M Area Monitor, P/N 94095603SWP.

1.2.4.2 SYNCOR QAM P/N QSP-1 00 Version 4.

1.2.4.3 IEEE Standard for Software Test Documentation IEEE Std 829-1983 1.2.4.4 EPRI Handbook for Verification and Validation of Digital Systems TR-1 03291 DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 10/23/02 -_-- PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SI 1 3076 PRODUCTION ,?"Y4W 4 of 246 PL N

1.3 Test Items 1.3.1 PROM P/N 94095603 Rev 2 1.3.1.1 Software Requirements Specification for PROM P/N 94095603 G-M Area Monitor PIN 94095603SRS, Rev 2.0 1.3.1.2 Software Design Descriptions for PROM PIN 94095603 GM-Area Monitor PIN 94095603SDD, Rev. 2.0 1.3.1.3 Installation, Operation, and Maintenance Instruction Manual Area Monitoring System Model 955A Part No. 955A-1 1.4 Features to be Tested 1.4.1 All of the requirements identified in the SRS P/N 94095603SRS Rev 2., except those listed in section 1.5, below, are to be functional tested.

1.5 Features Not to be Tested 1.5.1 RS-232 Communications - Optional hardware and software not configured in PROM 94095603 Rev. 2 1.5.2 RS-485 Communications - Optional hardware and software not configured in PROM 94095603 Rev. 2 1.5.3 VICO Loop Communications - Optional hardware and software not configured in PROM 94095603 Rev. 2 1.5.4 The Auxiliary alarm output function is not tested because in the 956A-201-Mi the Auxiliary alarm relay is wired to High alarm output, and will follow the operation of the High alarm relay.

1.5.5 Analog Low Scale and Full Scale set points are verified for full range operation.

Available compressed range set points are not tested directly as they may be effectively tested by a hardware performance test prior to use.

1.5.6 Detector check source mechanism operation to expose and shield detector is not tested because the check source actuation is a hardware function and its operation is verified as a part of the system factory and/or site acceptance test.

1.5.7 Operating temperature, relative humidity and heat loading are not tested. These tests are a function of the hardware, and are included in Qualification Report 950.366.

1.5.8 The operating range of 1.OOE-02 to 1.OOE+3mR/h only will be verified by this test.

The optional ranges of 1.00E-1 to 1.OOE+4mR/h and 1.00E0 to 1.OOE+5mRPh will be validated via a separate validation test procedure for each of these ranges.

1.5.9 Error Code E0001, Negative display value results from a failed set point PROM.

An effective method to simulate the failed PROM could not be implemented and the failure condition could not be tested.

1.6 Approach 1.6.1 The test personnel will use the system documentation to prepare all test design, case and procedure specifications. This approach will verify the accuracy and comprehensiveness of the information in the documentation in those areas covered by the tests.

DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT - .10/23/02 - -- PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION *?,.* 5 of 246 94095603VTPP PIN

1.6.2 The software testing process was strengthened by designating the responsibility for the validation testing to an independent V&V engineer and technician.

1.6.3 Each of the system features described in the Software Requirements Specification for PROM PIN 94095603 GM-Area Monitor will have at least one associated test-design specification.

1.7 Item Pass/Fail Criteria 1.7.1 Each feature of PROM P/N 94095603 Rev. 2 must pass all of its tests in order to pass this test.

1.8 Suspension Criteria and Resumption Requirements 1.8.1 If a single test fails the testing will be suspended. Testing will resume from the beginning when a new version of the PROM has been transmitted to the test group.

1.9 Test Deliverables 1.9.1 Test Plan for PROM P/N 94095603 GM-Area Monitor P/N 94095603VTP.

1.9.2 Test Summary Report for PROM P/N 94095603 GM-Area Monitor P/N 94095603VTR.

DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT I 10/23/02 - -- PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 6 of 246PL 94095603VTPP 1 3076 PRODUCTION ,.?¥*(

1.10 Test Tasks Task Predecessor Special Responsibility Effort Finish Date Task Skills Prepare test plan Completed Knowledge SE 10/15/02 SDD of UDR operation 2 Prepare test design Task 1 Knowledge SE 10/15/02 specifications of UDR operation.

3 Prepare test case Task 2 Knowledge SE 10/18/02 specifications of UDR operation.

4 Prepare test Task 3 Knowledge SE 10/22/02 procedure of UDR specifications operation.

5 Complete test item Task 4 N/A PM 10/23/02 transmittal 6 Execute the test Task 5 Knowledge TE Begin 10/23/02 procedures of UDR operation.

7 Resolve test Task 6 N/A SE, PM Begin 10/23/02 incident reports 8 Repeat all tasks 5 Task 7 SEE ABOVE Begin 10/23/02

- 7 until all test procedures have succeeded.

9 Write the system N/A SE, PM N/A N/A test summary Task 8 Note I report 10 Transmit all test Task 9 N/A PM N/A N/A documentation and Note I test data to the configuration management group.

Note I - Items 9 and 10 to be completed after the test procedure execution is finished.

1.11 Environmental Needs 1.11.1 Hardware. Testing will be done on a Victoreen Model 956A-201-M1 UDR. The

-M1 suffix identifies an internal wiring modification to provide an auxiliary High alarm relay. The modification includes wiring of the coil of the Auxiliary relay to follow the operation of the High alarm relay.

DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 10/23= PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET 94095603VP 11 3076 PRODUCTION 9-M 7 of 246 1 LN PO~J

In addition, a toggle switch will be temporarily added to the input of U47 to prevent the microprocessor from resetting the watch dog timer and thereby verify its operation. See 3.5.3.2 for additional information.

1.11.2 Software. PROM PIN 94095603 Rev. 2.

1.12 Responsibilities 1.12.1 V &V Test Group - This groups provides the overall management of the testing and the technical testing expertise.

1.12.2 Project Development Group- This group provides the firmware to be tested and responds to the Test Incident Reports. This group does any program debugging that is required.

1.12.3 The person writing test procedures and testing was not involved in writing the software.

1.13 Staffing and Training 1.13.1 V&V Test Group 1.13.2 Project Development Group 1.14 Schedule 1.14.1 See Test Tasks table 1.15 Risks and Contingencies 1.15.1.1 If the testing schedule is significantly impacted by functional test failure, the development manager will assign a full-time person to the test group to do debugging.

DATE TITLE SOFTWARE VALIDATION TEST SYNCRRDATNMNAGEMENT ----

- 10/23/02 --- PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION ,f 8 of 246 60 VT3 P0LN

2 Test Design Description 2.1 Test Design Specification Identifier 2.1.1 94095603VTP Software Test Procedure for PROM PIN 94095603, Rev. 2.

2.2 Features to be Tested 2.2.1 See Software V&V traceability matrix.

2.3 Approach Refinements 2.3.1 The UDR will be visually inspected for the defined hardware components and findings recorded in the Test Log.

2.3.2 All set point positions will be read.

2.3.3 All alarm state changes will be tested.

2.3.3.1 Fail Condition 2.3.3.1.1 No Counts 2.3.3.1.2 Loss of power to UDR 2.3.3.1.3 Hardware Failure (Watch Dog Timer) 2.3.3.2 Warn Alarm Condition:

2.3.3.2.1 Normal -> Wam -> Acknowledge -> Normal 2.3.3.2.2 Normal-> Warn -> Normal -> Acknowledge 2.3.3.3 High Alarm Condition

1. Normal -> Warn -> Acknowledge -> High -> Acknowledge -> Normal

2. Normal-> Warn -> High -> Acknowledge -> Normal

3. Normal-> Warn -> High -> Normal -> Acknowledge

4. Normal -> High -> Acknowledge -> Normal

5. Normal -> High -> Normal -> Acknowledge

6. Normal -> Warn -> Acknowledge -> High -> Acknowledge .> Warn -> Normal

7. Normal -> Warn -> High -> Acknowledge -> Wam -> Normal

8. Normal -> Warn -> High -> Warn -> Acknowledge -> Normal

9. Normal -> Warn -> High -> Warn -> Normal -> Acknowledge

10. Normal-> High -> Acknowledge -> Warn -> Normal

11. Normal -> High .> Warn -> Acknowledge ->Normal

12. Normal -> High -> Warn -> Normal-> Acknowledge 2.3.3.4 Under Range Condition 2.3.3.5 Over Range Condition

1. Normal -> Over Range -> Acknowledge -> Normal

2. Normal -> Over Range -> Normal -> Acknowledge

3. Normal -> Over Range -> High -> Acknowledge -> Normal

4. Normal -> Over Range -> High -> Normal -> Acknowledge

5. Normal -> Over Range -> High -> Warn -> Acknowledge -> Normal

6. Normal -> Over Range -> High -> Warn -> Normal -> Acknowledge

_7. Normal -> Over Range-> Warn -> Acknowledge_-> Normal

8. Normal -> Over Range -> Warn -> Normal -> Acknowledge 2.3.3.6 Check Source DATE TITLE SOFTWARE VALIDATION TEST SYNcOR-RADIATION MANAGEMENT I 123o2 -- PROCEDURE, 9405603 REV ECN NO. 94095603VTP SIZE 1 3076 L

2.3.3.7 Calibration 2.3.3.8 Data Entry 2.3.3.9 Calibration Mode/Time reset 2.3.3.10 Jumper Selection 2.3.3.10.1 Fail inhibited for no counts 2.3.3.10.2 HIGH and Warn Alarms automatically acknowledged 2.3.3.10.3 Check Source

1. Manual Acknowledge, Check Source Alarms Enabled

2. Automatic Acknowledge, Check Source Alarms Enabled 2.3.3.11 Alarm test with changed HIGH and WARN set points 2.3.3.12 Changed Conversion Constant 2.3.3.13 Changed Resolving Time 2.3.3.14 Calibration Mode with Check Source latched ON DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 1W2PROCEDURE9405603 2-REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIE 1 3076 PRODUCTION ,a?'W 10 of 246 1 PLN

2.4 Test Identification 2.4.1 Test I -Visual inspection of UDR 2.4.2 Test 2 - Start Up 2.4.3 Test 3 - Set Points 2.4.4 Test 4 - Normal Operation 2.4.5 Test 5 - Fail Condition - No Counts 2.4.6 Test 6 - Fail Condition - Loss of Power 2.4.7 Test 7 - Fail Condition - Hardware Failure (Watch Dog Timer) 2.4.8 Test 8 - Fail Condition - Anti-Jam 2.4.9 Test 9 - Warn Condition 1 2.4.10 Test 10 - Warn Condition 2 2.4.11 Test 11 - High Alarm Condition 1 2.4.12 Test 12 - High Alarm Condition 2 2.4.13 Test 13 - High Alarm Condition 3 2.4.14 Test 14 - High Alarm Condition 4 2.4.15 Test 15- High Alarm Condition 5 2.4.16 Test 16 - High Alarm Condition 6 2.4.17 Test 17- High Alarm Condition 7 2.4.18 Test 18 - High Alarm Condition 8 2.4.19 Test 19- High Alarm Condition 9 2.4.20 Test 20- High Alarm Condition 10 2.4.21 Test 21 - High Alarm Condition 11 2.4.22 Test 22 - High Alarm Condition 12 2.4.23 Test 23 - Under Range Condition 2.4.24 Test 24 - Over Range Condition 1 2.4.25 Test 25 - Over Range Condition 2 2.4.26 Test 26 - Over Range Condition 3 2.4.27 Test 27 - Over Range Condition 4

- 2.4.28 Test 28 - Over Range Condition 5 -------. . . ... .

2.4.29 Test 29 - Over Range Condition 6 2.4.30 Test 30 - Over Range Condition 7 2.4.31 Test 31 - Over Range Condition 8 2.4.32 Test 32 - Check Source Mode 2.4.33 Test 33 - Calibration 2.4.34 Test 34 - Data Entry 2.4.35 Test 35 - Reset Calibration Mode/Time 2.4.36 Test 36 - No Count Fail Inhibited 2.4.37 Test 37 - HIGH/Wam Alarm Automatic Acknowledge 2.4.38 Test 38 - Check Source Condition 1 2.4.39 Test 39 - Check Source Condition 2 2.4.40 Test 40 - Alarm test with changed HIGH and WARN set points 2.4.41 Test 41 - Changed Conversion Constant 2.4.42 Test 42 - Changed Resolving Time 2.4.43 -Test 43 - Calibrate Mode with Check Source latched ON 2.5 Feature Pass/Fail Criteria 2.5.1 Result of the test procedure item will be as specified in the test procedure to be considered as Passed. All other results are considered as Fail. Note for negative exponents, the value displayed is X.XX-1.

DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT I Q'2---PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO SiE 1 3076 PRODUCTION 6?,'%f 11 of 246 94095603VTP LN

3 Test Case Specification 3.1 Test Case Specification Identifier 3.1.1 94095603VTP Software Test Procedure for PROM P/N 94095603, Rev. 2.

3.2 Test Items - As listed in the following test descriptions 3.3 Input Specifications - As listed in the following test descriptions 3.4 Output Specifications - As listed in the following test descriptions 3.5 Environmental needs 3.5.1 Hardware 3.5.1.1 942TS-1 00 Test Set with interconnecting cables.

3.5.1.2 Dual Channel Oscilloscope/Tektronix 465 or equivalent.

3.5.1.3 HP 8116A Signal Generator or equivalent.

3.5.1.4 Frequency Counter: Fluke 1900A or equivalent- must be calibrated.

3.5.1.5 Test Leads, BNC terminated coaxial cables, etc.

3.5.1.6 Digital Multi-Meter (DMM): Fluke 8050A or equivalent - must be calibrated.

3.5.1.7 2, Digital Multi-Meter (DMM): Fluke 8600A or equivalent - must be calibrated 3.5.2 Software 3.5.2.1 PROM PIN 94095603 Rev. 2 3.5.3 Other environmental requirements 3.5.3.1 Note because the purpose of this test is to validate firmware operation, tolerances have not been applied to the output data and values stated.

The values displayed will be within the expected tolerances, but will not be exactly as stated. The expected tolerance on the display value is +/

1% of displayed value, and the expected tolerance on the analog output values is +/- 2% of full scale. These tolerances do not include the measurement equipment. With a fixed input, the final value will be displayed after 60 seconds.

3.5.3.2 In order to test the watch dog timer function, a toggle switch has been added between U44, pin 10 and U47, pin 3. The switch will simulate a microprocessor failure, and verifying operation of the watch dog timer.

DATE TITLE SOFTWARE VALIDATION TEST SYNCOR-RADIATION MANAGEMENT ... 10.23/02 - PROCEDURE.9405603 I

REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. TSIZE 1 3076 PRODUCTION ?,-%,( 12 of 246 PLN

4 Test Procedure Specification 4.1 Test Procedure Identifier 4.1.1 94095603VTP Software Test Procedure for PROM PIN 94095603, Rev. 2.

4.2 Purpose 4.2.1 This procedure is to provide a uniform method to functionally test the Model 956A Universal Digital Ratemeter PROM P/N 94095603 Rev. 2 4.2.2 Personnel performing this test must have Technicians Skill Level I per QSP-18-01.

4.2.3 The Model 956A UDR used for this test must have previously passed Test Procedure for the 956A-201 Universal Digital Ratemeter, TP956A-201-3, Rev. 4.

4.2.4 Data generated by this procedure must be reviewed and approved by QA.

4.3 Procedure Steps 4.3.1 Log 4.3.1.1 Record the results on the Test Log, Section 6.

4.3.2 Set Up 4.3.2.1 The Main PCB assembly jumpers (located in rear, right hand comer except J 3, located-near center of PCB Assembly, are installed as follows:

Jumper Function Position Operation JP1 Microprocessor Reset Out Normal Operation (Factory setting)

JP2 PROM Type 2-3 PROM 27256 (Factory setting)

JP3-1 / Statistical Accuracy In/In Fixed one second display update (Factory setting)

JP3-2 JP-3-3 Alarm Acknowledge In Manual Acknowledge (Factory setting)

JP3-4 Fail Alarm In Enable no counts fail alarm (Factory setting)

JP3-5 Check Source Alarm In Alarm Inhibited (factory setting)

JP4 Input Pulse Selection - 2-3 Positive input pulse - GM Detectors (Factory setting)

JP5 Shield Polarity Selection 2-3 Shield for positive pulse (GM) (Factory setting)

JP6 Anti-Jam Fuse Selection 1-2 LnaDle tor normal operation (tactorysetting)

JP7 Detector Type for Anti- 2-3 GM Tube (Factory setting)

Jam circuit timing ML, SOFTWARE VALIDATION TEST

. .PROCEDURE,9405603 I -I SZE 94095603VTP PLN

-I

4.3.2.2 PROM P/N 94095603 Rev. 2 must be installed.

4.3.2.3 Set-up Signal Generator as follows:

4.3.2.3.1 Square Wave pulse 4.3.2.3.2 1 volt peak positive pulse 4.3.2.3.3 DC offset: at ground reference 4.3.2.3.4 1 Hz 4.3.2.4 Connect Line Cord to P3.

4.3.2.5 Calculations:

4.3.2.5.1 Digital Display Value =

Signal generator frequency x 60 (sec/min) x Conversion Constant (See 4.3.3.3.7, Set point 5, for Conversion Constant value) 4.3.2.5.2 Signal Generator Frequency =

Digital Display Value / (Conversion Constant x 60) 4.3.2.5.3 Analog output P = log(R/LSV)/fIog(FSV) - Iog(LSV)]

V = P (Vmax - Vmin) + Vmin I =P(Imax - Imin) + Imin Where:

P = Percent of scale, expressed in a decimal number R = Current reading LSV = Low Scale Value FSV = Full Scale Value V = Voltage output I = Current output Vmax = Maximum voltage available (usually 10 Vdc)

Imax = Maximum current available (usually 20 mA)

Vmin = Minimum voltage available (usually 0 Vdc)

Imin = Minimum current available (usually 4 mA) 4.3.2.5.3 Dead time correction, Tau:

R = RO I [1 - (RO x Tau)]

Where:

R = Dead time corrected value R0 = Uncorrected value TAU = Dead time correction factor 4.3.2.5.4 Record Test Equipment Calibration Data on the Test Log.

DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 1 3 .... PROCEDURE.9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. S.E 1 3076 PRODUCTION *?*( 14 of 246 99 60 3TPLN

4.3.3 Start 4.3.3.1 Test 1: Visually inspect UDR for:

4.3.3.1.1 On/Off power button exists 4.3.3.1.1.1 Enter pass/fail on Test Log 4.3.3.1.2 1 analog output of 0- 10 VDC exists 4.3.3.1.2.1 Enter pass/fail on Test Log 4.3.3.1.3 2 analog outputs of 4-20 mA exists 4.3.3.1.3.1 Enter pass/fail on Test Log 4.3.3.1.4 1 SPDT high alarm output exists 4.3.3.1.4.1 Enter pass/fail on Test Log 4.3.3.1.5 1 DPDT warning output exists 4.3.3.1.5.1 Enter pass/fail on Test Log 4.3.3.1.6 1 DPDT fail output exists 4.3.3.1.6.1 Enter pass/fail on Test Log 4.3.3.1.7 RS-232 interface option board - Not present 4.3.3.1.7.1 Enter pass/fail on Test Log 4.3.3.1.8 VICO loop interface option board- Not present 4.3.3.1.8.1 Enter pass/fail on Test Log 4.3.3.1.9 RS-485 interface option board - Not present 4.3.3.1.9.1 Enter pass/fail on Test Log 4.3.3.2 Test 2:

4.3.3.2.1 Apply power to the UDR 4.3.3.2.2 After approximately I second, 00000 is displayed 4.3.3.2.2.1 Enter pass/fail on Test Log 4.3.3.2.3 After approximately 2 seconds, 0.00 mR/h displayed, Range light momentarily illuminates and turns off, the Fail safe Alarm, Warn and Fail relays energize, and the Digital Display begins to update once a second

... 4.3.3.2.3.1 Enter pass/fail on Test Log 4.3.3.2.4 Visual inspect the UDR for 4.3.3.2.4.1 Seven segment number display exists

......... 4.3.3.2.4.11-Enter pass/fail*-Te-st Log--g---

4.3.3.2.4.2 Backlight on mR/hr exists 4.3.3.2.4.2.1 Enter pass/fail on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCORRADIATIONMANAGEMENT -PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIE 1 3076 PRODUCTION g',t(( 15 of 246 PLN

4.3.3.2.4.3 Five Status Indicators exist (Check Source, HIGH, WARN, FAIL, and RANGE 4.3.3.2.4.3.1 Enter pass/fail on Test Log 4.3.3.2.4.4 Bargraph with a range of .01 to 106 mR/h exists 4.3.3.2.4.4.1 Enter pass/fail on Test Log 4.3.3.2.4.5 Check Source Pushbutton exists 4.3.3.2.4.5.1 Enter pass/fail on Test Log 4.3.3.2.4.6 Alarm Acknowledge Pushbutton exists 4.3.3.2.4.6.1 Enter pass/fail on Test Log 4.3.3.2.4.7 HIGH Alarm Set Point Display Pushbutton exists 4.3.3.2.4.7.1 Enter pass/fail on Test Log 4.3.3.2.4.8 WARN Alarm Set Point Display Pushbutton exists 4.3.3.2.4.8.1 Enter pass/fail on Test Log 4.3.3.2.4.9 Data Entry Switch exists 4.3.3.2.4.9.1 Enter pass/fail on Test Log 4.3.3.2.4.10 Digit Data Entry Pushbutton exists 4.3.3.2.4.10.1 Enter pass/fail on Test Log 4.3.3.2.4.11 Value Data Entry Pushbutton exists 4.3.3.2.4.11.1 Enter pass/fail on Test Log 4.3.3.2.4.12 Enter Data Entry Pushbutton exists 4.3.3.2.4.12.1 Enter pass/fail on Test Log 4.3.3.3 Test 3: Verify Set Point values 4.3.3.3.1 Set signal generator frequency to 1 Hz 4.3.3.3.2 Select position 0 on data entry/function switch and press ENTER pushbutton.

4.3.3.3.3 HIGH alarm limit of 1.00E2 is displayed on front panel 4.3.3.3.3.1 Enter pass/fail in result on Test Log 4.3.3.3.4 Press ENTER pushbutton.

4.3.3.3.5 Select position I on data entry/function switch (Warn Set point) an press ENTER pushbutton.

4.3.3.3.6 Value displayed is equal to 1.00E0 4.3.3.3.6.1 Enter pass/fail in result on Test Log 4.3.3.3.7 Left most digit is flashing 4.3.3.3.7.1 Enter pass/fail in result on Test Log 4.3.3.3.8 Press ENTER pushbutton.

DATE TITLE SOFTWARE VALIDATION TEST

-SYNCOR RADIATION MANAGEMENT 2 -- PROCEDURE,-9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NOT SIZE 1 3076 PRODUCTION ,%.W- 16 of 246 PLN

4.3.3.3.9 Select position 2 on data entry/function switch (Dead Time) and press ENTER pushbutton.

4.3.3.3.10 Value displayed is equal to 0.OOEO 4.3.3.3.10.1 Enter pass/fail in result on Test Log 4.3.3.3.11 Left most digit is flashing 4.3.3.3.11.1 Enter pass/fail in result on Test Log 4.3.3.3.12 Press ENTER pushbutton.

4.3.3.3.13 Select position 3 on data entry/function switch (Analog Full Scale) and press ENTER pushbutton.

4.3.3.3.14 Value displayed is equal to 1.00E3 4.3.3.3.14.1 Enter pass/fail in result on Test Log 4.3.3.3.15 Left most digit is flashing 4.3.3.3.15.1 Enter pass/fail in result on Test Log 4.3.3.3.16 Press ENTER pushbutton.

4.3.3.3.17 Select position 4 on data entry/function switch (Over Range) and press ENTER pushbutton.

4.3.3.3.18 Value displayed is equal to 1.00E3 4.3.3.3.18.1 Enter pass/fail in result on Test Log 4.3.3.3.19 Left most digit is flashing 4.3.3.3.19.1 Enter pass/fail in result on Test Log 4.3.3.3.20 Press ENTER pushbutton.

4.3.3.3.21 Select position 5 on data entry/function switch (Conversion Constant) and press ENTER pushbutton.

4.3.3.3.22 Value displayed is equal to 1.00-3 4.3.3.3.22.1 Enter pass/fail in result on Test Log 4.3.3.3.23 Left most digit is flashing 4.3.3.3.23.1 Enter pass/fail in result on Test Log 4.3.3.3.24 Press ENTER pushbutton.

4.3.3.3.25 Select position 6 on data entry/function switch.

4.3.3.3.26 E0007 (an invalid function) is displayed 4.3.3.3.26.1 Enter pass/fail in result on Test Log 4.3.3.3.27 Press ENTER pushbutton.

DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 10/23102 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. 9SIZE 1 3076 PRODUCTION -04%W 1 17 of 246 PLN

4.3.3.3.28 Select position 7 on data entry/function iwitch (Analog Low Scale) and press ENTER pushbutton.

4.3.3.3.29 Value displayed is equal to 1.00-2 4.3.3.3.29.1 Enter pass/fail in result on Test Log 4.3.3.3.30 Left most digit is flashing 4.3.3.3.30.1 Enter pass/fail in result on Test Log 4.3.3.3.31 Press ENTER pushbutton.

4.3.3.3.32 Select position 8 on data entry/function switch (Calibration Mode/Time) and press ENTER pushbutton.

4.3.3.3.33 Value displayed is equal to 6.OOE1 4.3.3.3.33.1 Enter pass/fail in result on Test Log 4.3.3.3.34 Left most digit is flashing 4.3.3.3.34.1 Enter pass/fail in result on Test Log 4.3.3.3.35 Press ENTER pushbutton.

4.3.3.3.36 Select position 9 on data entry/function switch (Under Range) and press ENTER pushbutton.

4.3.3.3.37 Value displayed is equal to 1.00-2 4.3.3.3.37.1 Enter pass/fail in result on Test Log 4.3.3.3.38 Left most digit is flashing 4.3.3.3.38.1 Enter pass/fail in result on Test Log 4.3.3.3.39 Press ENTER pushbutton.

4.3.3.3.40 Select position A on data entry/function switch and press ENTER pushbutton.

4.3.3.3.41 E0007 is display 4.3.3.3.41.1 Enter pass/fail in result on Test Log 4.3.3.3.42 Press ENTER pushbutton.

4.3.3.3.43 Select position B on data entry/function switch.

4.3.3.3.44 E0007 is display 4.3.3.3.44.1 Enter pass/fail in result on Test Log 4.3.3.3.45 Press ENTER pushbutton.

4.3.3.3.46 Select position C on data entry/function switch.

-4.313.33A7-E007 is--dis-pla* ....

4.3.3.3.47.1 Enter pass/fail in result on Test Log 4.3.3.3.48 Press ENTER pushbutton.

DATE TITLE SOFTWARE VALIDATION TEST ION MANAGEMENT I - i3`2 -PROCEDURE.9405603 I

RELEASED FOR DOC CTRL SHEET NO. SIZE PRODUCTION 1 18 of 246 1 PLN

4.3.3.3.49 Select position D on data entry/function switch and press ENTER pushbutton.

4.3.3.3.50 E0007 is display 4.3.3.3.50.1 Enter pass/fail in result on Test Log 4.3.3.3.51 Press ENTER pushbutton.

4.3.3.3.52 Select position E on data entry/function switch.

4.3.3.3.53 E0007 is display 4.3.3.3.53.1 Enter pass/fail in result on Test Log 4.3.3.3.54 Press ENTER pushbutton.

4.3.3.3.55 Select position F on data entry/function switch.

4.3.3.3.56 E0007 is display 4.3.3.3.56.1 Enter pass/fail in result on Test Log 4.3.3.3.57 Press ENTER pushbutton.

DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 1o/o2 -PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION ,M'.I.W 19 of 246 1 PLN

4.3.3.4 Test 4: Normal Operating Mode 4.3.3.4.1 Set signal generating frequency to i.00 Hz 4.3.3.4.2 Check source indicator is off 4.3.3.4.2.1 Enter pass/fail in result on Test Log 4.3.3.4.3 HIGH alarm indicator is off 4.3.3.4.3.1 Enter pass/fail in result on Test Log 4.3.3.4.4 HIGH alarm relay is energized 4.3.3.4.4.1 Enter pass/fail in result on Test Log 4.3.3.4.5 Auxiliary output is energized 4.3.3.4.5.1 Enter pass/fail in result on Test Log 4.3.3.4.6 WARN alarm indicator is off 4.3.3.4.6.1 Enter pass/fail in result on Test Log 4.3.3.4.7 WARN alarm relay is energized 4.3.3.4.7.1 Enter pass/fail in result on Test Log 4.3.3.4.8 Fail indicator is off 4.3.3.4.8.1 Enter pass/fail in result on Test Log 4.3.3.4.9 Fail relay is energized 4.3.3.4.9.1 Enter pass/fail in result on Test Log 4.3.3.4.10 Range indicator is off 4.3.3.4.10.1 Enter pass/fail in result on Test Log 4.3.3.4.11 Backlight is on mR/h 4.3.3.4.11.1 Enter pass/fail in result on Test Log 4.3.3.4.12 Bargraph is green 4.3.3.4.12.1 Enter pass/fail in result on Test Log 4.3.3.4.13 Bargraph has 2 segments lit 4.3.3.4.13.1 Enter pass/fail in result on Test Log 4.3.3.4.14 Radiation value displayed on front panel is 0.06 4.3.3.4.14.1 Enter pass/fail in result on Test Log 4.3.3.4.15 Analog output I (4-20mA) is 6.49 ma 4.3.3.4.15.1 Enter pass/fail in result on Test Log 4.3.3.4.16 Analog output 2 (4-2OmA) is 6.49 ma

_4.3.3.4.16.1 Enter pass/fail in result on Test Log 4.3.3.4.17 Analog output 3 (0-1OVdc) is 1.56 v 4.3.3.4.17.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR-RADIATION MANAGEMENT I PROCEDURE,9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION ,451,Wf 20 of 246 PLN

4.3.3.5 Test 5: Fail condition 1 4.3.3.5.1 No counts 4.3.3.5.1.1 Turn off the signal generator 4.3.3.5.1.2 After approximately five (5) minutes:

4.3.3.5.1.2.1 Check source indicator is off 4.3.3.5.1.2.1.1 Enter pass/fail in result on Test Log 4.3.3.5.1.2.2 HIGH alarm indicator is off 4.3.3.5.1.2.2.1 Enter pass/fail in result on Test Log 4.3.3.5.1.2.3 HIGH alarm relay is energized 4.3.3.5.1.2.3.1 Enter pass/fail in result on Test Log 4.3.3.5.1.2.4 Auxiliary output is energized 4.3.3.5.1.2.4.1 Enter pass/fail in result on Test Log 4.3.3.5.1.2.5 WARN alarm indicator is off 4.3.3.5.1.2.5.1 Enter pass/fail in result on Test Log 4.3.3.5.1.2.6 WARN alarm relay is energized 4.3.3.5.1.2.6.1 Enter pass/fail in result on Test Log 4.3.3.5.1.2.7 Fail indicator is on 4.3.3.5.1.2.7.1 Enter pass/fail in result on Test Log 4.3.3.5.1.2.8 Fail relay is de-energized 4.3.3.5.1.2.8.1 Enter pass/fail in result on Test Log 4.3.3.5.1.2.9 Range indicator is on 4.3.3.5.1.2.9.1 Enter pass/fail in result on Test Log 4.3.3.5.1.2.10 Backlight is mR/h 4.3.3.5.1.2.10.1 Enter pass/fail in result on Test Log 4.3.3.5.1.2.11 Bargraph has no segments lit 4.3.3.5.1.2.11.1 Enter pass/fail in result on Test Log 4.3.3.5.1.2.12 Radiation value displayed on front panel is 0.00 mR/h 4.3.3.5.1.2.12.1 Enter pass/fail in result on Test Log 4.3.3.5.1.2.13 Analog output I (4-20mA) is 4.0 ma.

4.3.3.5.1.2.13.1 Enter pass/fail in result on Test Log 4.3.3.5.1.2.14 Analog output 2 (4-20mA) is 4.0 ma.

4.3.3.5.1.2.14.1 Enter pass/fail in result on Test Log 4.3.3.5.1.2.15 Analog output 3 (0-10Vdc) is 0.0 v.

4.3.3.5.1.2.15.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCORRADIATION MANAGEMENT 103/o2 -- PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION ,V4a¥i(1 21 of 246 PLN

4.3.3.6 Test 6 : Fail Condition 2 loss of power 4.3.3.6.1 Remove power from UDR 4.3.3.6.1.1 Within one minute:

4.3.3.6.1.1.1 Check source indicator is off 4.3.3.6.1.1.1.1 Enter pass/fail in result on Test Log 4.3.3.6.1.1.2 HIGH alarm indicator is off 4.3.3.6.1.1.2.1 Enter pass/fail in result on Test Log 4.3.3.6.1.1.3 HIGH alarm relay is de-energized 4.3.3.6.1.1.3.1 Enter pass/fail in result on Test Log 4.3.3.6.1.1.4 Auxiliary output is de-energized 4.3.3.6.1.1.4.1 Enter pass/fail in result on Test Log 4.3.3.6.1.1.5 WARN alarm indicator is off 4.3.3.6.1.1.5.1 Enter pass/fail in result on Test Log 4.3.3.6.1.1.6 WARN alarm relay is de-energized 4.3.3.6.1.1.6.1 Enter pass/fail in result on Test Log 4.3.3.6.1.1.7 Fail indicator is off 4.3.3.6.1.1.7.1 Enter pass/fail in result on Test Log 4.3.3.6.1.1.8 Fail relay is de-energized 4.3.3.6.1.1.8.1 Enter pass/fail in result on Test Log 4.3.3.6.1.1.9 Range indicator is off 4.3.3.6.1.1.9.1 Enter pass/fail in result on Test Log 4.3.3.6.1.1.10 Bargraph has no segments lit 4.3.3.6.1.1.10.1 Enter pass/fail in result on Test Log 4.3.3.6.1.1.11 Backlight is off 4.3.3.6.1.1.11.1 Enter pass/fail in result on Test Log 4.3.3.6.1.1.12 No Radiation value is displayed on front panel 4.3.3.6.1.1.12.1 Enter pass/fail in result on Test Log 4.3.3.6.1.1.13 Analog output I (4-20mA) is 0 ma 4.3.3.6.1.1.13.1 Enter pass/fail in result on Test Log 4.3.3.6.1.1.14 Analog output 2 (4-2OmA) is 0 ma 4.3.3.6.1.1.14.1 Enter pass/fail in result on Test Log 4.3.3.6.1.1.15 Analog output 3 (0-1OVdc) is 0 v 4.3.3.6.1.1.15.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 3 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION q?&W 22 of 246 1 PLN

4.3.3.7 Test 7: Fail Condition 3 -Hardware failure (watch dog timer times out)

Note since this test simulates a microprocessor failure, the monitor, except for the Fail relay and lamp, will continue to operate normally Reapply power to the UDR 4.3.3.7.1 Set signal generator frequency to 1.0 Hz 4.3.3.7.2 Place/hold toggle switch added to disable the Watch dog timer in the open circuit position for approximately 15 seconds 4.3.3.7.3 After approximately 15 seconds:

4.3.3.7.4 Check source indicator is off 4.3.3.7.4.1 Enter pass/fail in result on Test Log 4.3.3.7.5 HIGH alarm indicator is off 4.3.3.7.5.1 Enter pass/fail in result on Test Log 4.3.3.7.6 HIGH alarm relay is energized 4.3.3.7.6.1 Enter pass/fail in result on Test Log 4.3.3.7.7 Auxiliary output is energized 4.3.3.7.7.1 Enter pass/fail in result on Test Log 4.3.3.7.8 WARN alarm indicator is off 4.3.3.7.8.1 Enter pass/fail in result on Test Log 4.3.3.7.9 WARN alarm relay is energized 4.3.3.7.9.1 Enter pass/fail in result on Test Log 4.3.3.7.10 Fail indicator is on 4.3.3.7.10.1 Enter pass/fail in result on Test Log 4.3.3.7.11 Fail relay is de-energized 4.3.3.7.11.1 Enter pass/fail in result on Test Log 4.3.3.7.12 Range indicator is off 4.3.3.7.12.1 Enter pass/fail in result on Test Log 4.3.3.7.13 Backlight is on mR/h 4.3.3.7.13.1 Enter pass/fail in result on Test Log 4.3.3.7.14 Bargraph is green 4.3.3.7.14.1 Enter pass/fail in result on Test Log 4.3.3.7.15 Bargraph has 2 segments lit 4.3.3.7.15.1 Enter pass/fail in result on Test Log 4.3.3.7.16 Radiation value displayed on front panel is .06OmR/h 4.3.3.7.16.1 Enter pass/fail in result on Test Log DATE 10NA3102 TorLE SOFTWARE VALIDATION TEST SYNcoR-RADIATION MANAGEMENT I2 -- PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION 6.( 23 of 246 94095603VTP PL

4.3.3.7.17 Analog output 1 (4-20mA) is 6.49 ma 4.3.3.7.17.1 Enter pass/fail in result on Test Log 4.3.3.7.18 Analog output 2 (4-2OmA) is 6.49 ma 4.3.3.7.18.1 Enter pass/fail in result on Test Log 4.3.3.7.19 Analog output 3 (0-10Vdc) is 1.56 v 4.3.3.7.19.1 Enter pass/fail in result on Test Log 4.3.3.8 Test 8: Detector Anti-Jam 4.3.3.8.1 Set signal generator frequency to 80,000Hz 4.3.3.8.2 Within one minute:

4.3.3.8.3 Check source indicator is off 4.3.3.8.3.1 Enter pass/fail in result on Test Log 4.3.3.8.4 HIGH alarm indicator is on, flashing 4.3.3.8.4.1 Enter pass/fail in result on Test Log 4.3.3.8.5 HIGH alarm relay is de-energized 4.3.3.8.5.1 Enter pass/fail in result on Test Log 4.3.3.8.6 Auxiliary output is de-energized 4.3.3.8.6.1 Enter pass/fail in result on Test Log 4.3.3.8.7 WARN alarm indicator is on flashing 4.3.3.8.7.1 Enter pass/fail in result on Test Log 4.3.3.8.8 WARN alarm relay is de-energized 4.3.3.8.8.1 Enter pass/fail in result on Test Log 4.3.3.8.9 Fail indicator is on 4.3.3.8.9.1 Enter pass/fail in result on Test Log 4.3.3.8.10 Fail relay is de-energized 4.3.3.8.10.1 Enter pass/fail in result on Test Log 4.3.3.8.11 Range indicator is on 4.3.3.8.11.1 Enter pass/fail in result on Test Log 4.3.3.8.12 Backlights are off 4.3.3.8.12.1 Enter pass/fail in result on Test Log 4.3.3.8.13 Bargraph is red 4.3.3.8.13.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT -- 123/02 --- PROCEDURE.9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION Ia.¥(( 24 of 246 PLN

4.3.3.8.14 Bargraph has all segments lit 4.3.3.8.14.1 Enter pass/fail in result on Test Log 4.3.3.8.15 Radiation value displayed on front panel is EEEEE 4.3.3.8.15.1 Enter pass/fail in result on Test Log 4.3.3.8.16 Analog output I (4-2OmA) is 4 ma 4.3.3.8.16.1 Enter pass/fail in result on Test Log 4.3.3.8.17 Analog output 2 (4-20mA) is 4 ma 4.3.3.8.17.1 Enter pass/fail in result on Test Log 4.3.3.8.18 Analog output 3 (0-1OVdc) is 0 v 4.3.3.8.18.1 Enter pass/fail in result on Test Log 4.3.3.8.19 The high voltage is 0.0 v 4.3.3.8.19.1 Enter pass/fail in result on Test Log 4.3.3.8.20 The anti-jam fuse is opened 4.3.3.8.20.1.1 Enter pass/fail in result on Test Log 4.3.3.8.21 To clear the anti-jam condition 4.3.3.8.21.1 Reduce the signal generator frequency to 1 Hz 4.3.3.8.21.2 Turn the AC power to the UDR off 4.3.3.8.21.3 Replace the anti-jam fuse 4.3.3.8.21.4 Turn the UDR power back on DATE TITLE SOFTWARE VALIDATION TEST SYNcORRADIATION MANAGEMENT 1o1Q3102 - -.. PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIE 1 3076 PRODUCTION MY.Z1" 25 of 246 EuI9 6 O 3 VTP PLN

4.3.3.9 Test 9: Warn Alarm Condition 1 Normal -> Warn -> Acknowledge -> Normal 4.3.3.9.1 Set signal generator frequency to 16.0 Hz 4.3.3.9.1.1 Within one minute:

4.3.3.9.1.1.1 Check source indicator is off 4.3.3.9.1.1.1.1 Enter pass/fail in result on Test Log 4.3.3.9.1.1.2 HIGH alarm indicator is off 4.3.3.9.1.1.2.1 Enter pass/fail in result on Test Log 4.3.3.9.1.1.3 HIGH alarm relay is energized 4.3.3.9.1.1.3.1 Enter pass/fail in result on Test Log 4.3.3.9.1.1.4 Auxiliary output is energized 4.3.3.9.1.1.4.1 Enter pass/fail in result on Test Log 4.3.3.9.1.1.5 WARN alarm indicator is off 4.3.3.9.1.1.5.1 Enter pass/fail in result on Test Log 4.3.3.9.1.1.6 WARN alarm relay is energized 4.3.3.9.1.1.6.1 Enter pass/fail in result on Test Log 4.3.3.9.1.1.7 Fail indicator is off 4.3.3.9.1.1.7.1 Enter pass/fail in result on Test Log 4.3.3.9.1.1.8 Fail relay is energized 4.3.3.9.1.1.8.1 Enter pass/fail in result on Test Log 4.3.3.9.1.1.9 Range indicator is off 4.3.3.9.1.1.9.1 Enter pass/fail in result on Test Log 4.3.3.9.1.1.10 Bargraph is green 4.3.3.9.1.1.10.1 Enter pass/fail in result on Test Log 4.3.3.9.1.1.11 Bargraph has 6 segments lit 4.3.3.9.1.1.11.1 Enter pass/fail in result on Test Log 4.3.3.9.1.1.12 Backlight is on mR/h 4.3.3.9.1.1.12.1 Enter pass/fail in result on Test Log 4.3.3.9.1.1.13 Radiation value displayed on front panel is .960 mR/h 4.3.3.9.1.1.13.1 Enter pass/fail in result on Test Log 4.3.3.9.1.1.14 Analog output I (4-2OmA) is 10.34 ma 4.3.3.9.1.1.14.1 Enter pass/fail in result on Test Log 4.3.3.9.1.1.15 Analog output 2 (4-2OmA) is 10.34 ma 4.3.3.9.1.1.15.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT -- PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION 041/m 26 of 246 1JPLN

4.3.3.9.1.1.16 Analog output 3 (0-10Vdc) is 3.96 v 4.3.3.9.1.1.16.1 Enter pass/fail in result on Test Log 4.3.3.9.2 Set signal generator frequency to 17.0 Hz 4.3.3.9.2.1 Within one minute 4.3.3.9.2.1.1 Check source indicator is off 4.3.3.9.2.1.1.1 Enter pass/fail in result on Test Log 4.3.3.9.2.1.2 HIGH alarm indicator is off 4.3.3.9.2.1.2.1 Enter pass/fail in result on Test Log 4.3.3.9.2.1.3 HIGH alarm relay is energized 4.3.3.9.2.1.3.1 Enter pass/fail in result on Test Log 4.3.3.9.2.1.4 Auxiliary output is energized 4.3.3.9.2.1.4.1 Enter pass/fail in result on Test Log 4.3.3.9.2.1.5 WARN alarm indicator is flashing 4.3.3.9.2.1.5.1 Enter pass/fail in result on Test Log 4.3.3.9.2.1.6 WARN alarm relay is de-energized 4.3.3.9.2.1.6.1 Enter pass/fail in result on Test Log 4.3.3.9.2.1.7 Fail indicator is off 4.3.3.9.2.1.7.1 Enter pass/fail in result on Test Log 4.3.3.9.2.1.8 Fail relay is energized 4.3.3.9.2.1.8.1 Enter pass/fail in result on Test Log 4.3.3.9.2.1.9 Range indicator is off 4.3.3.9.2.1.9.1 Enter pass/fail in result on Test Log 4.3.3.9.2.1.10 Bargraph is amber 4.3.3.9.2.1.10.1 Enter pass/fail in result on Test Log 4.3.3.9.2.1.11 Bargraph has 6 segments lit 4.3.3.9.2.1.11.1 Enter pass/fail in result on Test Log 4.3.3.9.2.1.12 Backlight is on mRPh 4.3.3.9.2.1.12.1 Enter pass/fail in result on Test Log 4.3.3.9.2.1.13 Radiation value displayed on front panel is 1.02 mR/H 4.3.3.9.2.1.13.1 Enter pass/fail in result on Test Log 4.3.3.9.2.1.14 Analog output I (4-2OmA) is 10.43 ma 4.3.3.9.2.1.14.1 Enter pass/fail in result on Test Log 4.3.3.9.2.1.15 Analog output 2 (4-2OmA) is 10.43 ma 4.3.3.9.2.1.15.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR-RADIATION MANAGEMENT 10/23/02 PROCEDUREo9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION £'i,.W( 27 of 246 949SG03VTP PLN

4.3.3.9.2.1.16 Analog output 3 (0-10Vdc) is 4.02 v 4.3.3.9.2.1.16.1 Enter pass/fail in result on Test Log 4.3.3.9.2.2 Press ALARM ACKNOWLEDGE pushbutton 4.3.3.9.2.3 Check source indicator is off 4.3.3.9.2.3.1 Enter pass/fail in result on Test Log 4.3.3.9.2.4 HIGH alarm indicator is off 4.3.3.9.2.4.1 Enter pass/fail in result on Test Log 4.3.3.9.2.5 HIGH alarm relay is energized 4.3.3.9.2.5.1 Enter pass/fail in result on Test Log 4.3.3.9.2.6 Auxiliary output is energized 4.3.3.9.2.6.1 Enter pass/fail in result on Test Log 4.3.3.9.2.7 WARN alarm indicator is on steady 4.3.3.9.2.7.1 Enter pass/fail in result on Test Log 4.3.3.9.2.8 WARN alarm relay is de-energized 4.3.3.9.2.8.1 Enter pass/fail in result on Test Log 4.3.3.9.2.9 Fail indicator is off 4.3.3.9.2.9.1 Enter pass/fail in result on Test Log 4.3.3.9.2.10 Fail relay is energized 4.3.3.9.2.10.1 Enter pass/fail in result on Test Log 4.3.3.9.2.11 Range indicator is off 4.3.3.9.2.11.1 Enter pass/fail in result on Test Log 4.3.3.9.2.12 Bargraph is amber 4.3.3.9.2.12.1 Enter pass/fail in result on Test Log 4.3.3.9.2.13 Bargraph has 6 segments lit 4.3.3.9.2.13.1 Enter pass/fail in result on Test Log 4.3.3.9.2.14 Backlight is on mR/h 4.3.3.9.2.14.1.1 Enter pass/fail in result on Test Log 4.3.3.9.2.15 -Radiation value displayed on front panel is 1.02 mR/h 4.3.3.9.2.15.1 Enter pass/fail in result on Test Log 4.3.3.9.2.16 Analog output I (4-20mA) is 10.43 ma 4.3.3.9.2.16.1 Enter pass/fail in result on Test Log 4.3.3.9.2.17 Analog output 2 (4-20mA) is 10.43 ma 4.3.3.9.2.17.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST MAAGEMEN 2PROCEDURE, --- 9405603 I

EASED FOR DOC CTRL SHEET NO. I SIZE

)DUCTION 1 9400 28 of 246 1 PLN

4.3.3.9.2.18 Analog output 3 (0-10Vdc) is 4.02 vdc 4.3.3.9.2.18.1 Enter pass/fail in result on Test Log 4.3.3.9.2.19 Set signal generator frequency to 15.0 Hz 4.3.3.9.2.20 Within one minute:

4.3.3.9.2.20.1 Check source indicator is off 4.3.3.9.2.20.1.1 Enter pass/fail in result on Test Log 4.3.3.9.2.20.2 HIGH alarm indicator is off 4.3.3.9.2.20.2.1 Enter pass/fail in result on Test Log 4.3.3.9.2.20.3 HIGH alarm relay is energized 4.3.3.9.2.20.3.1 Enter pass/fail in result on Test Log 4.3.3.9.2.20.4 Auxiliary output is energized 4.3.3.9.2.20.4.1 Enter pass/fail in result on Test Log 4.3.3.9.2.20.5 WARN alarm indicator is off 4.3.3.9.2.20.5.1 Enter pass/fail in result on Test Log 4.3.3.9.2.20.6 WARN alarm relay is energized 4.3.3.9.2.20.6.1 Enter pass/fail in result on Test Log 4.3.3.9.2.20.7 Fail indicator is off 4.3.3.9.2.20.7.1 Enter pass/fail in result on Test Log 4.3.3.9.2.20.8 Fail relay is energized 4.3.3.9.2.20.8.1 Enter pass/fail in result on Test Log 4.3.3.9.2.20.9 Range indicator is off 4.3.3.9.2.20.9.1 Enter pass/fail in result on Test Log 4.3.3.9.2.20.10 Bargraph is green 4.3.3.9.2.20.10.1 Enter pass/fail in result on Test Log 4.3.3.9.2.20.11 Bargraph has 6 segments lit 4.3.3.9.2.20.11.1 Enter pass/fail in result on Test Log 4.3.3.9.2.20.12 Backlight is on mR/h 4.3.3.9.2.20.12.1 Enter pass/fail in result on Test Log 4.3.3.9.2.20.13 Radiation value displayed on front panel is .900 mR/h 4.3.349.2.20.13.1 Enter pass/fail in result-on Test Log 4.3.3.9.2.20.14 Analog output I (4-2OmA) is 10.25 ma 4.3.3.9.2.20.14.1.1 Enter pass/fail in result on Test Log 4.3.3.9.2.20.15 Analog output 2 (4-2OmA) is 10.25 ma 4.3.3.9.2.20.15.1 Enter pass/fail in result on Test Log 4.3.3.9.2.20.16 Analog output 3 (0-10Vdc) is 3.91 v 4.3.3.9.2.20.16.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT IPROCEDURE;9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION ,i'%'( 29 of 246 94095603VTP PLN

4.3.3.10 Test 10: WARN Alarm Condition 2 Normal -> Wam -> Normal -> Acknowledge 4.3.3.10.1 Set signal generator frequency to 19 Hz 4.3.3.10.1.1 Within one minute 4.3.3.10.1.1.1 Check source indicator is off 4.3.3.10.1.1.1.1 Enter pass/fail in result on Test Log 4.3.3.10.1.1.2 HIGH alarm indicator is off 4.3.3.10.1.1.2.1 Enter pass/fail in result on Test Log 4.3.3.10.1.1.3 HIGH alarm relay is energized 4.3.3.10.1.1.3.1 Enter pass/fail in result on Test Log 4.3.3.10.1.1.4 Auxiliary output is energized 4.3.3.10.1.1.4.1 Enter pass/fail in result on Test Log 4.3.3.10.1.1.5 WARN alarm indicator is flashing 4.3.3.10.1.1.5.1 Enter pass/fail in result on Test Log 4.3.3.10.1.1.6 WARN alarm relay is de-energized 4.3.3.10.1.1.6.1 Enter pass/fail in result on Test Log 4.3.3.10.1.1.7 Fail indicator is off 4.3.3.10.1.1.7.1 Enter pass/fail in result on Test Log 4.3.3.10.1.1.8 Fail relay is energized 4.3.3.10.1.1.8.1 Enter pass/fail in result on Test Log 4.3.3.10.1.1.9 Range indicator is off 4.3.3.10.1.1.9.1 Enter pass/fail in result on Test Log 4.3.3.10.1.1.10 Bargraph is amber 4.3.3.10.1.1.10.1 Enter pass/fail in result on Test Log 4.3.3.10.1.1.11 Bargraph has 6 segments lit 4.3.3.10.1.1.11.1 Enter pass/fail in result on Test Log 4.3.3.10.1.1.12 Backlight is on mR/h 4.3.3.10.1.1.12.1 Enter pass/fail in result on Test Log 4.3.3.10.1.1.13 -Radiation value displayed on front panel is 1.14 mR/h 4.3.3.10.1.1.13.1 Enter pass/fail in result on Test Log 4.3.3.10.1.1.14 Analog output I (4-2OmA) is 10.58 ma 4.3.3.10.1.1.14.1 Enter pass/fail in result on Test Log 4.3.3.10.1.1.15 Analog output 2 (4-2OmA) is 10.58 ma 4.3.3.10.1.1.15.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCoR-RADIATIONMANAGEMENT o10/23M2

-_ -PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION Jý.Ik, 30 of 246 1 P LN

4.3.3.10.1.1.16 Analog output 3 (0-10Vdc) is 4.11 v 4.3.3.10.1.1.16.1 Enter pass/fail in result on Test Log 4.3.3.10.2 Set signal generator frequency to 15.0 Hz 4.3.3.10.2.1 Within one minute 4.3.3.10.2.1.1 Check source indicator is off 4.3.3.10.2.1.1.1 Enter pass/fail in result on Test Log 4.3.3.10.2.1.2 HIGH alarm indicator is off 4.3.3.10.2.1.2.1 Enter pass/fail in result on Test Log 4.3.3.10.2.1.3 HIGH alarm relay is energized 4.3.3.10.2.1.3.1 Enter pass/fail in result on Test Log 4.3.3.10.2.1.4 Auxiliary output is energized 4.3.3.10.2.1.4.1 Enter pass/fail in result on Test Log 4.3.3.10.2.1.5 WARN alarm indicator is flashing 4.3.3.10.2.1.5.1 Enter pass/fail in result on Test Log 4.3.3.10.2.1.6 WARN alarm relay is de-energized 4.3.3.10.2.1.6.1 Enter pass/fail in result on Test Log 4.3.3.10.2.1.7 Fail indicator is off 4.3.3.10.2.1.7.1 Enter pass/fail in result on Test Log 4.3.3.10.2.1.8 Fail relay is energized 4.3.3.10.2.1.8.1 Enter pass/fail in result on Test Log 4.3.3.10.2.1.9 Range indicator is off 4.3.3.10.2.1.9.1 Enter pass/fail in result on Test Log 4.3.3.10.2.1.10 Bargraph is amber 4.3.3.10.2.1.10.1 Enter pass/fail in result on Test Log 4.3.3.10.2.1.11 Bargraph has 6 segments lit 4.3.3.10.2.1.11.1 Enter pass/fail in result on Test Log 4.3.3.10.2.1.12 Backlight is on mR/h 4.3.3.10.2.1.12.1 Enter pass/fail in result on Test Log 4.3.3.10.2.1.13 Radiation value displayed on front panel is .900 mR/h 4.3.3.10.2.1.13.1 Enter pass/fail in result on Test Log 4.3.3.10.2.1.14 Analog output I (4-2OmA) is 10.25 ma 4.3.3.10.2.1.14.1 Enter pass/fail in result on Test Log 4.3.3.10.2.1.15 Analog output 2 (4-20mA) is 10.25 ma 4.3.3.10.2.1.15.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR-RADIATION MANAGEMENT -- PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION 941/iw[ 31 of 246 94095603VTP PLN

4.3.3.10.2.1.16 Analog output 3 (0-10Vdc) is 3.91 v 4.3.3.10.2.1.16.1 Enter pass/fail in resiult on Test Log 4.3.3.10.2.2 Press ALARM ACKNOWLEDGE pushbutton 4.3.3.10.2.3 Check source indicator is off 4.3.3.10.2.3.1 Enter pass/fail in result on Test Log 4.3.3.10.2.4 HIGH alarm indicator is off 4.3.3.10.2.4.1 Enter pass/fail in result on Test Log 4.3.3.10.2.5 HIGH alarm relay is energized 4.3.3.10.2.5.1 Enter pass/fail in result on Test Log 4.3.3.10.2.6 Auxiliary output is energized 4.3.3.10.2.6.1 Enter pass/fail in result on Test Log 4.3.3.10.2.7 WARN alarm indicator is off 4.3.3.10.2.7.1 Enter pass/fail in result on Test Log 4.3.3.10.2.8 WARN alarm relay is energized 4.3.3.10.2.8.1 Enter pass/fail in result on Test Log 4.3.3.10.2.9 Fail indicator is off 4.3.3.10.2.9.1 Enter pass/fail in result on Test Log 4.3.3.10.2.10 Fail relay is energized 4.3.3.10.2.10.1 Enter pass/fail in result on Test Log 4.3.3.10.2.11 Range indicator is off 4.3.3.10.2.11.1 Enter pass/fail in result on Test Log 4.3.3.10.2.12 Bargraph is green 4.3.3.10.2.12.1 Enter pass/fail in result on Test Log 4.3.3.10.2.13 Bargraph has 6 segments lit 4.3.3.10.2.13.1 Enter pass/fail in result on Test Log 4.3.3.10.2.14 Backlight is on mR/h 4.3.3.10.2.14.1.1 Enter pass/fail in result on Test Log 4.3.3.10.2.15 Radiation value displayed on front panel is .900 mR/h 4.3.3.10.2.15.1 _Enter pass/fail in result on Test Log_

4.3.3.10.2.16 Analog output I (4-2OmA) is 10.25 ma 4.3.3.10.2.16.1 Enter pass/fail in result on Test Log 4.3.3.10.2.17 Analog output 2 (4-20mA) is 10.25 ma 4.3.3.10.2.17.1 Enter pass/fail in result on Test Log 4.3.3.10.2.18 Analog output 3 (0-1OVdc) is 3.91 v 4.3.3.10.2.18.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCORRADIATION MANAGEMENT 1o PROCEDURE, 94O5603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION i;% 1( 32 of 246 1 PLN

4.3.3.11 Test 11: HIGH Alarm Condition 1 Normal -> Warn -> Acknowledge -> High -> Acknowledge -> Normal 4.3.3.11.1 Set signal generator frequency to 331 Hz 4.3.3.11.1.1 Within one minute 4.3.3.11.1.1.1 Check source indicator is off 4.3.3.11.1.1.1.1 Enter pass/fail in result on Test Log 4.3.3.11.1.1.2 HIGH alarm indicator is off 4.3.3.11.1.1.2.1 Enter pass/fail in result on Test Log 4.3.3.11.1.1.3 HIGH alarm relay is energized 4.3.3.11.1.1.3.1 Enter pass/fail in result on Test Log 4.3.3.11.1.1.4 Auxiliary output is energized 4.3.3.11.1.1.4.1 Enter pass/fail in result on Test Log 4.3.3.11.1.1.5 WARN alarm indicator is flashing 4.3.3.11.1.1.5.1 Enter pass/fail in result on Test Log 4.3.3.11.1.1.6 WARN alarm relay is de-energized 4.3.3.11.1.1.6.1 Enter pass/fail in result on Test Log 4.3.3.11.1.1.7 Fail indicator is off 4.3.3.11.1.1.7.1 Enter pass/fail in result on Test Log 4.3.3.11.1.1.8 Fail relay is energized 4.3.3.11.1.1.8.1 Enter pass/fail in result on Test Log 4.3.3.11.1.1.9 Range indicator is off 4.3.3.11.1.1.9.1 Enter pass/fail in result on Test Log 4.3.3.11.1.1.10 Bargraph is amber 4.3.3.11.1.1.10.1 Enter pass/fail in result on Test Log 4.3.3.11.1.1.11 Bargraph has 9 segments lit 4.3.3.11.1.1.11.1 Enter pass/fail in result on Test Log 4.3.3.11.1.1.12 Backlight is on mR/h 4.3.3.11.1.1.12.1 Enter pass/fail in result on Test Log 4.3.3.11.1.1.13 Radiation value displayed on front panel is 19.9 mRPh 4.3.3.11.1.1.13.1 Enter pass/fail in result on Test Log 4.3.3.11.1.1.14 Analog output 1 (4-2OmA) is 14.55 ma 4.3.3.11.1.1.14.1 Enter pass/fail in result on Test Log 4.3.3.11.1.1.15 Analog output 2 (4-20mA) is 14.55 ma 4.3.3.11.1.1.15.1 Enter pass/fail in result on Test Log DATE 10/23M2OTITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MA GEME 131PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 3076 PRODUCTION 6'0'1 33 of 246 22 6 0 3VTP L PLN

4.3.3.11.1.1.16 Analog output 3 (0-10Vdc) is 6.60 v 4.3.3.11.1.1.16.1 Enter pass/fail in result on Test Log 4.3.3.11.1.2 Press ALARM ACKNOWLEDGE pushbutton 4.3.3.11.1.3 Check source indicator is off 4.3.3.11.1.3.1 Enter pass/fail in result on Test Log 4.3.3.11.1.4 HIGH alarm indicator is off 4.3.3.11.1.4.1 Enter pass/fail in result on Test Log 4.3.3.11.1.5 HIGH alarm relay is energized 4.3.3.11.1.5.1 Enter pass/fail in result on Test Log 4.3.3.11.1.6 Auxiliary output is energized 4.3.3.11.1.6.1 Enter pass/fail in result on Test Log 4.3.3.11.1.7 WARN alarm indicator is on steady 4.3.3.11.1.7.1 Enter pass/fail in result on Test Log 4.3.3.11.1.8 WARN alarm relay is de-energized 4.3.3.11.1.8.1 Enter pass/fail in result on Test Log 4.3.3.11.1.9 Fail indicator is off 4.3.3.11.1.9.1 Enter pass/fail in result on Test Log 4.3.3.11.1.10 Fail relay is energized 4.3.3.11.1.10.1 Enter pass/fail in result on Test Log 4.3.3.11.1.11 Range indicator is off 4.3.3.11.1.11.1 Enter pass/fail in result on Test Log 4.3.3.11.1.12 Bargraph is amber 4.3.3.11.1.12.1 Enter pass/fail in result on Test Log 4.3.3.11.1.13 Bargraph has 9 segments lit 4.3.3.11.1.13.1 Enter pass/fail in result on Test Log 4.3.3.11.1.14 Backlight is on mR/h 4.3.3.11.1.14.1.1 Enter pass/fail in result on Test Log 4.3.3.11.1.15 Radiation value displayed on front panel is 19.9 mR/h 4.3.3.11.1.15.1 Enter pass/fail in result on Test Log 4.3.3.11.1.16 Analog output I (4-2OmA) is 14.55 ma 4.3.3.11.1.16.1 Enter pass/fail in result on Test Log 4.3.3.11.1.17 Analog output 2 (4-20mA) is 14.55 ma 4.3:3;11.-1,17-1-Enter pass/fail in result on Test Log 4.3.3.11.1.18 Analog output 3 (0-10Vdc) is 6.60 v 4.3.3.11.1.18.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT I PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION 9,*.%wf 34 of 246 1 PLN

4.3.3.11.2 Set signal generator frequency to 1.68 kHz 4.3.3.11.3 Within one minute:

4.3.3.11.3.1 Check source indicator is off 4.3.3.11.3.1.1 Enter pass/fail in result on Test Log 4.3.3.11.3.2 HIGH alarm indicator is flashing 4.3.3.11.3.2.1 Enter pass/fail in result on Test Log 4.3.3.11.3.3 HIGH alarm relay is de-energized 4.3.3.11.3.3.1 Enter pass/fail in result on Test Log 4.3.3.11.3.4 Auxiliary output is de-energized 4.3.3.11.3.4.1 Enter pass/fail in result on Test Log 4.3.3.11.3.5 WARN alarm indicator is on steady 4.3.3.11.3.5.1 Enter pass/fail in result on Test Log 4.3.3.11.3.6 WARN alarm relay is de-energized 4.3.3.11.3.6.1 Enter pass/fail in result on Test Log 4.3.3.11.3.7 Fail indicator is off 4.3.3.11.3.7.1 Enter pass/fail in result on Test Log 4.3.3.11.3.8 Fail relay is energized 4.3.3.11.3.8.1 Enter pass/fail in result on Test Log 4.3.3.11.3.9 Range indicator is off 4.3.3.11.3.9.1 Enter pass/fail in result on Test Log 4.3.3.11.3.10 Bargraph is red 4.3.3.11.3.10.1 Enter pass/fail in result on Test Log 4.3.3.11.3.11 Bargraph has 12 segments lit 4.3.3.11.3.11.1 Enter pass/fail in result on Test Log 4.3.3.11.3.12 Backlight is on R/h 4.3.3.11.3.12.1.1 Enter pass/fail in result on Test Log 4.3.3.11.3.13 Radiation value displayed on front panel is .101 R/h 4.3.3.11.3.13.1 Enter pass/fail in result on Test Log 4.3.3.11.3.14 Analog output I (4-2OmA) is 16.81 ma 4.3.3.11.3.14.1 Enter pass/fail in result on Test Log 4.3.3.11.3.15 Analog output 2 (4-20mA) is 16.81 ma 4.3.3.11.3.15.1 Enter pass/fail in result on Test Log 4.3.3.11.3.16 Analog output 3 (0-10Vdc) is 8.01 v 4.3.3.11.3.16.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 2PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION M'M'. 35 of 246 PLN

4.3.3.11.3.17 Press ALARM ACKNOWLEDGE pushbutton 4.3.3.11.3.18 Check source indicator is off 4.3.3.11.3.18.1 Enter pass/fail in r'esult on Test Log 4.3.3.11.3.19 HIGH alarm indicator is on steady 4.3.3.11.3.19.1 Enter pass/fail in result on Test Log 4.3.3.11.3.20 HIGH alarm relay is de-energized 4.3.3.11.3.20.1 Enter pass/fail in result on Test Log 4.3.3.11.3.21 Auxiliary output is de-energized 4.3.3.11.3.21.1 Enter pass/fail in result on Test Log 4.3.3.11.3.22 WARN alarm indicator is on steady 4.3.3.11.3.22.1 Enter pass/fail in result on Test Log 4.3.3.11.3.23 WARN alarm relay is de-energized 4.3.3.11.3.23.1 Enter pass/fail in result on Test Log 4.3.3.11.3.24 Fail indicator is off 4.3.3.11.3.24.1 Enter pass/fail in result on Test Log 4.3.3.11.3.25 Fail relay is energized 4.3.3.11.3.25.1 Enter pass/fail in result on Test Log 4.3.3.11.3.26 Range indicator is off 4.3.3.11.3.26.1 Enter pass/fail in result on Test Log 4.3.3.11.3.27 Bargraph is red 4.3.3.11.3.27.1 Enter pass/fail in result on Test Log 4.3.3.11.3.28 Bargraph has 12 segments lit 4.3.3.11.3.28.1 Enter pass/fail in result on Test Log 4.3.3.11.3.29 Backlight is on R/h 4.3.3.11.3.29.1.1 Enter pass/fail in result on Test Log 4.3.3.11.3.30 Radiation value displayed on front panel is .101 RPh 4.3.3.11.3.30.1 Enter pass/fail in result on Test Log 4.3.3.11.3.31 Analog output 1 (4-2OmA) is 16.81 ma 4.3.3.11.3.31.1 Enter pass/fail in result on Test Log 4.3.3.11.3.32 Analog output 2 (4-2OmA) is 16.81 ma 4.3.3.11.3.32.1 Enter pass/fail in result on Test Log

-4.3.3.11.3.33-Analog output-3 (0-1OVdc) is 8.01 v

-- 4.3,3.11.3.-33.1-Enter-pass/fail in-result-on -Test Log DATE TITL SOFTWARE MANAGEENE VALIDATION TEST SYNCOR RADIATION MAAGEMENT 1 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 3076 1PRODUCTIO 3o 94095603V'TP I

4.3.3.11.4 Set signal generator frequency to 15.0 Hz 4.3.3.11.5 Within one minute 4.3.3.11.5.1 Check source indicator is off 4.3.3.11.5.1.1 Enter pass/fail in result on Test Log 4.3.3.11.5.2 HIGH alarm indicator is off 4.3.3.11.5.2.1 Enter pass/fail in result on Test Log 4.3.3.11.5.3 HIGH alarm relay is energized 4.3.3.11.5.3.1 Enter pass/fail in result on Test Log 4.3.3.11.5.4 Auxiliary output is energized 4.3.3.11.5.4.1 Enter pass/fail in result on Test Log 4.3.3.11.5.5 WARN alarm indicator is off 4.3.3.11.5.5.1 Enter pass/fail in result on Test Log 4.3.3.11.5.6 WARN alarm relay is energized 4.3.3.11.5.6.1 Enter pass/fail in result on Test Log 4.3.3.11.5.7 Fail indicator is off 4.3.3.11.5.7.1 Enter pass/fail in result on Test Log 4.3.3.11.5.8 Fail relay is energized 4.3.3.11.5.8.1 Enter pass/fail in result on Test Log 4.3.3.11.5.9 Range indicator is off 4.3.3.11.5.9.1 Enter pass/fail in result on Test Log 4.3.3.11.5.10 Bargraph is green 4.3.3.11.5.10.1 Enter pass/fail in result on Test Log 4.3.3.11.5.11 Bargraph has 6 segments lit 4.3.3.11.5.11.1 Enter pass/fail in result on Test Log 4.3.3.11.5.12 Backlight is on mR/h 4.3.3.11.5.12.1 Enter pass/fail in result on Test Log 4.3.3.11.5.13 Radiation value displayed on front panel is .900 mR/h 4.3.3.11.5.13.1 Enter pass/fail in result on Test Log 4.3.3.11.5.14 Analog output 1 (4-20mA) is 10.25 ma 4.3.3.11.5.14.1 Enter pass/fail in result on Test Log 4.3.3.11.5.15 Analog output 2 (4-2OmA) is 10.25 ma 4.3.3.11.5.15.1 -Eniter -pa/fa-il i-ie-s-u It-on-Test Log 4.3.3.11.5.16 Analog output 3 (0-10Vdc) is 3.91 v 4.3.3.11.5.16.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT - __......... o -- - - PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET No. SIZE 1 3076 PRODUCTION ,?d"YbM 37 of 246 94095603VTP LN

4.3.3.12 Test 12: HIGH Alarm Condition 2 Normal -> Warn -> High -> Acknowledge -> Noirmal 4.3.3.12.1 Set signal generator frequency to 331 Hz 4.3.3.12.2 Within one minute 4.3.3.12.2.1 Check source indicator is off 4.3.3.12.2.1.1 Enter pass/fail in result on Test Log 4.3.3.12.2.2 HIGH alarm indicator is off 4.3.3.12.2.2.1 Enter pass/fail in result on Test Log 4.3.3.12.2.3 HIGH alarm relay is energized 4.3.3.12.2.3.1 Enter pass/fail in result on Test Log 4.3.3.12.2.4 Auxiliary output is energized 4.3.3.12.2.4.1 Enter pass/fail in result on Test Log 4.3.3.12.2.5 WARN alarm indicator is flashing 4.3.3.12.2.5.1 Enter pass/fail in result on Test Log 4.3.3.12.2.6 WARN alarm relay is de-energized 4.3.3.12.2.6.1 Enter pass/fail in result on Test Log 4.3.3.12.2.7 Fail indicator is off 4.3.3.12.2.7.1 Enter pass/fail in result on Test Log 4.3.3.12.2.8 Fail relay is energized 4.3.3.12.2.8.1 Enter pass/fail in result on Test Log 4.3.3.12.2.9 Range indicator is off 4.3.3.12.2.9.1 Enter pass/fail in result on Test Log 4.3.3.12.2.10 Bargraph is amber 4.3.3.12.2.10.1 Enter pass/fail in result on Test Log 4.3.3.12.2.11 Bargraph has 9 segments lit 4.3.3.12.2.11.1 Enter pass/fail in result on Test Log 4.3.3.12.2.12 Backlight is on mR/h 4.3.3.12.2.12.1 Enter pass/fail in result on Test Log 4.3.3.12.2.13 Radiation value displayed on front panel is 19.9 mR/h 4.3.3.12.2.13.1 Enter pass/fail in result on Test Log 4.3.3.12.2.14 Analog output I (4-20mA) is 14.55 ma 4.3.3.12.2.14.1 Enter pass/faiI in--riuIlt on Test Log 4.3.3.12.2.15 Analog output 2 (4-20mA) is 14.55 ma 4.3.3.12.2.15.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNcOR RADIATION MANAGEMENT - 1=/02 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOG CTRL SHEET NO. SIZE 1 3076 PRODUCTION akfW 38 of 246 PLN

4.3.3.12.2.16 Analog output 3 (0-1OVdc) is 6.60 v 4.3.3.12.2.16.1 Enter pass/fail in result on Test Log 4.3.3.12.3 Set signal generator frequency to 1.68 kHz 4.3.3.12.4 Within one minute:

4.3.3.12.4.1 Check source indicator is off 4.3.3.12.4.1.1 Enter pass/fail in result on Test Log 4.3.3.12.4.2 HIGH alarm indicator is flashing 4.3.3.12.4.2.1 Enter pass/fail in result on Test Log 4.3.3.12.4.3 HIGH alarm relay is de-energized 4.3.3.12.4.3.1 Enter pass/fail in result on Test Log 4.3.3.12.4.4 Auxiliary output is de-energized 4.3.3.12.4.4.1 Enter pass/fail in result on Test Log 4.3.3.12.4.5 WARN alarm indicator is flashing 4.3.3.12.4.5.1 Enter pass/fail in result on Test Log 4.3.3.12.4.6 WARN alarm relay is de-energized 4.3.3.12.4.6.1 Enter pass/fail in result on Test Log 4.3.3.12.4.7 Fail indicator is off 4.3.3.12.4.7.1 Enter pass/fail in result on Test Log 4.3.3.12.4.8 Fail relay is energized 4.3.3.12.4.8.1 --Enter pass/fail in result on Test Log 4.3.3.12.4.9 Range indicator is off 4.3.3.12.4.9.1 Enter pass/fail in result on Test Log 4.3.3.12.4.10 Bargraph is red 4.3.3.12.4.10.1 Enter pass/fail in result on Test Log 4.3.3.12.4.11 Bargraph has 12 segments lit 4.3.3.12.4.11.1 Enter pass/fail in result on Test Log 4.3.3.12.4.12 Backlight is on R/h 4.3.3-12.4.12.1.1 Enter pass/fail in result on Test Log 4.3.3.12.4.13 Radiation value displayed on front panel is .101 R/h 4.3.3.12.4.13.1 Enter pass/fail in result on Test Log 4.3.3.12.4.14 Analog output I (4-20mA) is 16.81 ma 4.3.3.12.4.14.1 Enter pass/fail in result on Test Log 4.3.3.12.4.15 Analog output 2 (4-20mA) is 16.81 ma 4.3.3.12.4.15.1 Enter pass/fail in result on Test Loq DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT I PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION I ,'bW( 39 of 246 94095603VTP PLN

4.3.3.12.4.16 Analog output 3 (0-10Vdc) is 8.01 v 4.3.3.12.4.16.1 Enter pass/fail in result on Test Log 4.3.3.12.4.17 Press ALARM ACKNOWLEDGE pushbutton 4.3.3.12.4.18 Check source indicator is off 4.3.3.12.4.18.1 Enter pass/fail in result on Test Log 4.3.3.12.4.19 HIGH alarm indicator is on steady 4.3.3.12.4.19.1 Enter pass/fail in result on Test Log 4.3.3.12.4.20 HIGH alarm relay is de-energized 4.3.3.12.4.20.1 Enter pass/fail in result on Test Log 4.3.3.12.4.21 Auxiliary output is de-energized 4.3.3.12.4.21.1 Enter pass/fail in result on Test Log 4.3.3.12.4.22 WARN alarm indicator is on steady 4.3.3.12.4.22.1 Enter pass/fail in result on Test Log 4.3.3.12.4.23 WARN alarm relay is de-energized 4.3.3.12.4.23.1 Enter pass/fail in result on Test Log 4.3.3.12.4.24 Fail indicator is off 4.3.3.12.4.24.1 Enter pass/fail in result on Test Log 4.3.3.12.4.25 Fail relay is energized 4.3.3.12.4.25.1 Enter pass/fail in result on Test Log 4.3.3.12.4.26 Range indicator is off 4.3.3.12.4.26.1 Enter pass/fail in result on Test Log 4.3.3.12.4.27 Bargraph is red 4.3.3.12.4.27.1 Enter pass/fail in result on Test Log 4.3.3.12.4.28 Bargraph has 12 segments lit 4.3.3.12.4.28.1 Enter pass/fail in result on Test Log 4.3.3.12.4.29 Backlight is on R/h 4.3.3.12.4.29.1.1 Enter pass/fail in result on Test Log 4.3.3.12.4.30 Radiation value displayed on front panel is .101 R/h 4.3.3.12.4.30.1 Enter pass/fail in result on Test Log 4.3.3.12.4.31- Analog-utput 1 (4-20mA) is 16.81 ma 4.3.3.12.4.31.1 Enter pass/fail in result on Test Log 4.3.3.12.4.32 Analog output 2 (4-2OmA) is 16.81 ma 4.3.3.12.4.32.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR R IATION MANAGEMENT I---- 123/02 PROCEDURE,.9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. TSIE 1 3076 PRODUCTION ,5'W(. 40 of 246 9I095603T P PLN

4.3.3.12.4.33 Analog output 3 (0-10Vdc) is 8.01 v 4.3.3.12.4.33.1 Enter pass/fail in result on Test Log 4.3.3.12.5 Set signal generator frequency to 15.0 Hz 4.3.3.12.6 Within one minute 4.3.3.12.6.1 Check source indicator is off 4.3.3.12.6.1.1 Enter pass/fail in result on Test Log 4.3.3.12.6.2 HIGH alarm indicator is off 4.3.3.12.6.2.1 Enter pass/fail in result on Test Log 4.3.3.12.6.3 HIGH alarm relay is energized 4.3.3.12.6.3.1 Enter pass/fail in result on Test Log 4.3.3.12.6.4 Auxiliary output is energized 4.3.3.12.6.4.1 Enter pass/fail in result on Test Log 4.3.3.12.6.5 WARN alarm indicator is off 4.3.3.12.6.5.1 Enter pass/fail in result on Test Log 4.3.3.12.6.6 WARN alarm relay is energized 4.3.3.12.6.6.1 Enter pass/fail in result on Test Log 4.3.3.12.6.7 Fail indicator is off 4.3.3.12.6.7.1 Enter pass/fail in result on Test Log 4.3.3.12.6.8 Fail relay is energized 4.3.3.12.6.8.1 Enter pass/fail in result on Test Log 4.3.3.12.6.9 Range indicator is off 4.3.3.12.6.9.1 Enter pass/fail in result on Test Log 4.3.3.12.6.10 Bargraph is green 4.3.3.12.6.10.1 Enter pass/fail in result on Test Log 4.3.3.12.6.11 Bargraph has 6 segments lit 4.3.3.12.6.11.1 Enter pass/fail in result on Test Log 4.3.3.12.6.12 Backlight is on mR/h 4.3.3.12.6.12.1 Enter pass/fail in result on Test Log 4.3.3.12.6.13 Radiation value displayed on front panel is .900 mR/h 4.3.3.12.6.13.1 Enter pass/fail in result on Test Log 4.3.3.12.6.14 Analog output 1 (4-2OmA) is 10.25 ma

. 4.3-3.12.6.14 Enter pass/fail in result on Test Log 4.3.3.12.6.15 Analog output 2 (4-20mA) is 10.25 ma 4.3.3.12.6.15.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCORRRADIATION MANAGEMENT 3 - PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION I %9'Y(M, 1 41 of 246 94095603VTP PLN

4.3.3.12.6.16 Analog output 3 (0-1OVdc) is 3.91 v 4.3.3.12.6.16.1 Enter pass/fail in result on Test Log 4.3.3.13 Test 13: HIGH Alarm Condition 3 Normal -> Warn -> High -> Normal -> Acknowledge 4.3.3.13.1 Set signal generator frequency to 331 Hz 4.3.3.13.2 Within one minute 4.3.3.13.2.1 Check source indicator is off 4.3.3.13.2.1.1 Enter pass/fail in result on Test Log 4.3.3.13.2.2 HIGH alarm indicator is off 4.3.3.13.2.2.1 Enter pass/fail in result on Test Log 4.3.3.13.2.3 HIGH alarm relay is energized 4.3.3.13.2.3.1 Enter pass/fail in result on Test Log 4.3.3.13.2.4 Auxiliary output is energized 4.3.3.13.2.4.1 Enter pass/fail in result on Test Log 4.3.3.13.2.5 WARN alarm indicator is flashing 4.3.3.13.2.5.1 Enter pass/fail in result on Test Log 4.3.3.13.2.6 WARN alarm relay is de-energized 4.3.3.13.2.6.1 Enter pass/fail in result on Test Log 4.3.3.13.2.7 Fail indicator is off 4.3.3.13.2.7.1 Enter pass/fail in result on Test Log 4.3.3.13.2.8 Fail relay is energized 4.3.3.13.2.8.1 Enter pass/fail in result on Test Log 4.3.3.13.2.9 Range indicator is off 4.3.3.13.2.9.1 Enter pass/fail in result on Test Log 4.3.3.13.2.10 Bargraph is amber 4.3.3.13.2.10.1 Enter pass/fail in result on Test Log 4.3.3.13.2.11 Bargraph has 9 segments lit 4.3.3.13.2.11.1 Enter pass/fail in result on Test Log 4.3.3.13.2.12 Backlight is on mR/h

. - 4.3.-313.2.12.1 Enter pass/fail in result on Test Log 4.3.3.13.2.13 Radiation value displayed on front panel is 19.9 mR/h 4.3.3.13.2.13.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT - 1-23/02 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION 9?,Ml 42 of 246 PLN

4.3.3.13.2.14 Analog output 1 (4-2OmA) is 14.55 ma 4.3.3.13.2.14.1 Enter pass/fail in result on Test Log 4.3.3.13.2.15 Analog output 2 (4-20mA) is 14.55 ma 4.3.3.13.2.15.1 Enter pass/fail in result on Test Log 4.3.3.13.2.16 Analog output 3 (0-10Vdc) is 6.6 v 4.3.3.13.2.16.1 Enter pass/fail in result on Test Log 4.3.3.13.3 Set signal generator frequency to 1.68 kHz 4.3.3.13.4 Within one minute:

4.3.3.13.4.1 Check source indicator is off 4.3.3.13.4.1.1 Enter pass/fail in result on Test Log 4.3.3.13.4.2 HIGH alarm indicator is flashing 4.3.3.13.4.2.1 Enter pass/fail in result on Test Log 4.3.3.13.4.3 HIGH alarm relay is de-energized 4.3.3.13.4.3.1 Enter pass/fail in result on Test Log 4.3.3.13.4.4 Auxiliary output is de-energized 4.3.3.13.4.4.1 Enter pass/fail in result on Test Log 4.3.3.13.4.5 WARN alarm indicator is flashing 4.3.3.13.4.5.1 Enter pass/fail in result on Test Log 4.3.3.13.4.6 WARN alarm relay is de-energized 4.3.3.13.4.6.1 Enter pass/fail in result on Test Log 4.3.3.13.4.7 Fail indicator is off 4.3.3.13.4.7.1 Enter pass/fail in result on Test Log 4.3.3.13.4.8 Fail relay is energized 4.3.3.13.4.8.1 Enter pass/fail in result on Test Log 4.3.3.13.4.9 Range indicator is off 4.3.3.13.4.9.1 Enter pass/fail in result on Test Log 4.3.3.13.4.10 Bargraph is red 4.3.3.13.4.10.1 Enter pass/fail in result on Test Log 4.3.3.13.4.11 Bargraph has 12 segments lit 4.3.3.13.4.11.1 Enter pass/fail in result on Test Log 4.3.3.13.4.12 Backlight is on R/h 4.3 3.12.11

4 -Enter pass/fail in result on Test Log 4.3.3.13.4.13 Radiation value displayed on front panel is .101 R/h 4.3.3.13.4.13.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT .10/23M2 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION ,4yo-t 43 of 246 PLN

4.3.3.13.4.14 Analog output 1 (4-20mA) is 16.81 ma 4.3.3.13.4.14.1 Enter pass/fail in result on Test Log 4.3.3.13.4.15 Analog output 2 (4-20mA) is 16.81 ma 4.3.3.13.4.15.1 Enter pass/fail in result on Test Log 4.3.3.13.4.16 Analog output 3 (0-10Vdc) is 8.01 v 4.3.3.13.4.16.1 Enter pass/fail in result on Test Log 4.3.3.13.5 Set signal generator frequency to 15 Hz 4.3.3.13.6 Within one minute 4.3.3.13.6.1 Check source indicator is off 4.3.3.13.6.1.1 Enter pass/fail in result on Test Log 4.3.3.13.6.2 HIGH alarm indicator is flashing 4.3.3.13.6.2.1 Enter pass/fail in result on Test Log 4.3.3.13.6.3 HIGH alarm relay is de-energized 4.3.3.13.6.3.1 Enter pass/fail in result on Test Log 4.3.3.13.6.4 Auxiliary output is de-energized 4.3.3.13.6.4.1 Enter pass/fail in result on Test Log 4.3.3.13.6.5 WARN alarm indicator is flashing 4.3.3.13.6.5.1 Enter pass/fail in result on Test Log 4.3.3.13.6.6 WARN alarm relay is de-energized 4.3.3.13.6.6.1 Enter pass/fail in result on Test Log 4.3.3.13.6.7 Fail indicator is off 4.3.3.13.6.7.1 Enter pass/fail in result on Test Log 4.3.3.13.6.8 Fail relay is energized 4.3.3.13.6.8.1 Enter pass/fail in result on Test Log 4.3.3.13.6.9 Range indicator is off 4.3.3.13.6.9.1 Enter pass/fail in result on Test Log 4.3.3.13.6.10 Bargraph is red 4.3.3.13.6.10.1 Enter pass/fail in result on Test Log 4.3.3.13.6.11 Bargraph has 6 segments lit 4.3.3.13.6.11.1 Enter pass/fail in result on Test Log 4.3.3.13.6.12 Backlight is on mR/h 4.3.3.13.6.12.1 Enter pass/fail in result on Test Log 4.3.3.13.6.13 Radiation value displayed on front panel is .900 mR/h 4.3.3.13.6.13.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCORRADIATION MANAGEMENT - -- 10/23102 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION J'Y'(. 44 of 246 94095603VTP PLN

4.3.3.13.6.14 Analog output I (4-20mA) is 10.25 ma 4.3.3.13.6.14.1 Enter pass/fail in result on Test Log 4.3.3.13.6.15 Analog output 2 (4-20mA) is 10.25 ma 4.3.3.13.6.15.1 Enter pass/fail in result on Test Log 4.3.3.13.6.16 Analog output 3 (0-10Vdc) is 3.91 v 4.3.3.13.6.16.1 Enter pass/fail in result on Test Log 4.3.3.13.7 Press ALARM ACKNOWLEDGE pushbutton 4.3.3.13.8 Check source indicator is off 4.3.3.13.8.1 Enter pass/fail in result on Test Log 4.3.3.13.9 HIGH alarm indicator is off 4.3.3.13.9.1 Enter pass/fail in result on Test Log 4.3.3.13.10 HIGH alarm relay is energized 4.3.3.13.10.1 Enter pass/fail in result on Test Log 4.3.3.13.11 Auxiliary output is energized 4.3.3.13.11.1 Enter pass/fail in result on Test Log 4.3.3.13.12 WARN alarm indicator is off 4.3.3.13.12.1 Enter pass/fail in result on Test Log 4.3.3.13.13 WARN alarm relay is energized 4.3.3.13.13.1 Enter pass/fail in result on Test Log 4.3.3.13.14 Fail indicator is off 4.3.3.13.14.1 Enter pass/fail in result on Test Log 4.3.3.13.15 Fail relay is energized 4.3.3.13.15.1 Enter pass/fail in result on Test Log 4.3.3.13.16 Range indicator is off 4.3.3.13.16.1 Enter pass/fail in result on Test Log 4.3.3.13.17 Bargraph is green 4.3.3.13.17.1 Enter pass/fail in result on Test Log 4.3.3.13.18 Bargraph has 6 segments lit 4.3.3.13.18.1 Enter pass/fail in result on Test Log 4.3.3.13.19 - Backlight is-ornmR/h -

4.3.3.13.19.1 Enter pass/fail in result on Test Log 4.3.3.13.20 Radiation value displayed on front panel is .900 mR/h 4.3.3.13.20.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCORRADIATION MANAGEMENT _10/2302 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SE 1 3076 PRODUCTION I EW '( 45 of 246 9O95603VTP PLN

4.3.3.13.21 Analog output I (4-20mA) is 10.25 nia 4.3.3.13.21.1 Enter pass/fail in result on Test Log 4.3.3.13.22 Analog output 2 (4-20mA) is 10.25 ma 4.3.3.13.22.1 Enter pass/fail in result on Test Log 4.3.3.13.23 Analog output 3 (0-1OVdc) is 3.91 v 4.3.3.13.23.1 Enter pass/fail in result on Test Log 4.3.3.14 Test 14: HIGH Alarm Condition 4 Normal -> High -> Acknowledge -> Normal 4.3.3.14.1 Set signal generator frequency to 1.68 kHz 4.3.3.14.2 Within one minute:

4.3.3.14.2.1 Check source indicator is off 4.3.3.14.2.1.1 Enter pass/fail in result on Test Log 4.3.3.14.2.2 HIGH alarm indicator is flashing 4.3.3.14.2.2.1 Enter pass/fail in result on Test Log 4.3.3.14.2.3 HIGH alarm relay is de-energized 4.3.3.14.2.3.1 Enter pass/fail in result on Test Log 4.3.3.14.2.4 Auxiliary output is de-energized 4.3.3.14.2.4.1 Enter pass/fail in result on Test Log 4.3.3.14.2.5 WARN alarm indicator is flashing 4.3.3.14.2.5.1 Enter pass/fail in result on Test Log 4.3.3.14.2.6 WARN alarm relay is de-energized 4.3.3.14.2.6.1 Enter pass/fail in result on Test Log 4.3.3.14.2.7 Fail indicator is off 4.3.3.14.2.7.1 Enter pass/fail in result on Test Log 4.3.3.14.2.8 Fail relay is energized 4.3.3.14.2.8.1 Enter pass/fail in result on Test Log 4.3.3.14.2.9 Range indicator is off 4.3.3.14.2.9.1 Enter pass/fail in result on Test Log 4.3.3.14.2.10 Bargraph is red 4.3.3.14.2.10.1 Enter pass/fail in result on Test Log

--4.3.3.14.2.11- Bargraph has 12 segments lit 4.3.3.14.2.11.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT I - -1023/02 - -PROCEDURE,-9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION 0% &1 46 of 246 PLN

4.3.3.14.2.12 Backlight is on R/h 4.3.3.14.2.12.1.1 Enter pass/fail in result on Test Log 4.3.3.14.2.13 Radiation value displayed on front panel is .101 R/h 4.3.3.14.2.13.1 Enter pass/fail in result on Test Log 4.3.3.14.2.14 Analog output 1 (4-2OmA) is 16.81 ma 4.3.3.14.2.14.1 Enter pass/fail in result on Test Log 4.3.3.14.2.15 Analog output 2 (4-2OmA) is 16.81 ma 4.3.3.14.2.15.1 Enter pass/fail in result on Test Log 4.3.3.14.2.16 Analog output 3 (0-10Vdc) is 8.01 v 4.3.3.14.2.16.1 Enter pass/fail in result on Test Log 4.3.3.14.2.17 Press ALARM ACKNOWLEDGE pushbutton 4.3.3.14.2.18 Check source indicator is off 4.3.3.14.2.18.1 Enter pass/fail in result on Test Log 4.3.3.14.2.19 HIGH alarm indicator is on steady 4.3.3.14.2.19.1 Enter pass/fail in result on Test Log 4.3.3.14.2.20 HIGH alarm relay is de-energized 4.3.3.14.2.20.1 Enter pass/fail in result on Test Log 4.3.3.14.2.21 Auxiliary output is de-energized 4.3.3.14.2.21.1 Enter pass/fail in result on Test Log 4.3.3.14.2.22 WARN alarm indicator is on steady 4.3.3.14.2.22.1 Enter pass/fail in result on Test Log 4.3.3.14.2.23 WARN alarm relay is de-energized 4.3.3.14.2.23.1 Enter pass/fail in result on Test Log 4.3.3.14.2.24 Fail indicator is off 4.3.3.14.2.24.1 Enter pass/fail in result on Test Log 4.3.3.14.2.25 Fail relay is energized 4.3.3.14.2.25.1 Enter pass/fail in result on Test Log 4.3.3.14.2.26 Range indicator is off 4.3.3.14.2.26.1 Enter pass/fail in result on Test Log 4.3.3.14.2.27-Bargraph is-red

--- 4.3.3.14:2.-27-1 -Enter pass/fail in-result on Test Log 4.3.3.14.2.28 Bargraph has 12 segments lit 4.3.3.14.2.28.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 102/2 - PROCEDURE;9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION 0?.*Yýf 47 of 246 94095603VT P PLN

4.3.3.14.2.29 Backlight is on R/h 4.3.3.14.2.29.1.1 Enter pass/fail in result on Test Log 4.3.3.14.2.30 Radiation value displayed on front panel is .101 R/h 4.3.3.14.2.30.1 Enter pass/fail in result on Test Log 4.3.3.14.2.31 Analog output I (4-20mA) is 16.81 ma 4.3.3.14.2.31.1 Enter pass/fail in result on Test Log 4.3.3.14.2.32 Analog output 2 (4-2OmA) is 16.81 ma 4.3.3.14.2.32.1 Enter pass/fail in result on Test Log 4.3.3.14.2.33 Analog output 3 (0-1OVdc) is 8.01 v 4.3.3.14.2.33.1 Enter pass/fail in result on Test Log 4.3.3.14.3 Set signal generator frequency to 15 Hz 4.3.3.14.4 Within one minute 4.3.3.14.4.1 Check source indicator is off 4.3.3.14.4.1.1 Enter pass/fail in result on Test Log 4.3.3.14.4.2 HIGH alarm indicator is off 4.3.3.14.4.2.1 Enter pass/fail in result on Test Log 4.3.3.14.4.3 HIGH alarm relay is energized 4.3.3.14.4.3.1 Enter pass/fail in result on Test Log 4.3.3.14.4.4 Auxiliary output is energized 4.3.3:14.4.4.1 Enter pass/fail in result on Test Log 4.3.3.14.4.5 WARN alarm indicator is off 4.3.3.14.4.5.1 Enter pass/fail in result on Test Log 4.3.3.14.4.6 WARN alarm relay is energized 4.3.3.14.4.6.1 Enter pass/fail in result on Test Log 4.3.3.14.4.7 Fail indicator is off 4.3.3.14.4.7.1 Enter pass/fail in result on Test Log 4.3.3.14.4.8 Fail relay is energized 4.3.3.14.4.8.1 Enter pass/fail in result on Test Log 4.3.3.14.4.9 Range indicator is off 4.3.3.14.4.9.1 Enter pass/fail in result on Test Log 4.3:3.-14.4.10 -Bargraph is green 4.3.3.14.4.10.1 Enter pass/fail in result on Test Log DATE T[TLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 1012T02 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SE 1 3076 PRODUCTION ,1_,( 48 of 246 PLN

4.3.3.14.4.11 Bargraph has 6 segments lit 4.3.3.14.4.11.1 Enter pass/fail in result on Test Log 4.3.3.14.4.12 Backlight is on mR/h 4.3.3.14.4.12.1 Enter pass/fail in result on Test Log 4.3.3.14.4.13 Radiation value displayed on front panel is.900 mR/h 4.3.3.14.4.13.1 Enter pass/fail in result on Test Log 4.3.3.14.4.14 Analog output I (4-20mA) is 10.25 ma 4.3.3.14.4.14.1 Enter pass/fail in result on Test Log 4.3.3.14.4.15 Analog output 2 (4-2OmA) is 10.25 ma 4.3.3.14.4.15.1 Enter pass/fail in result on Test Log 4.3.3.14.4.16 Analog output 3 (0-10Vdc) is 3.91 v 4.3.3.14.4.16.1 Enter pass/fail in result on Test Log 4.3.3.15 Test 15: HIGH Alarm Condition 5 Normal -> High -> Normal -> Acknowledge 4.3.3.15.1 Set signal generator frequency to 1.68 kHz 4.3.3.15.2 Within one minute:

4.3.3.15.2.1 Check source indicator is off 4.3.3.15.2.1.1 Enter pass/fail in result on Test Log 4.3.3.15.2.2 HIGH alarm indicator is flashing 4.3.3.15.2.2.1 Enter pass/fail in result on Test Log 4.3.3.15.2.3 HIGH alarm relay is de-energized 4.3.3.15.2.3.1 Enter pass/fail in result on Test Log 4.3.3.15.2.4 Auxiliary output is de-energized 4.3.3.15.2.4.1 Enter pass/fail in result on Test Log 4.3.3.15.2.5 WARN alarm indicator is flashing 4.3.3.15.2.5.1 Enter pass/fail in result on Test Log 4.3.3.15.2.6 WARN alarm relay is de-energized 4.3.3.15.2.6.1 Enter pass/fail in result on Test Log 4.3.3.15.2.7--Fail indicator is off

-4.3.3;15.2:7.1-Enterpass/failinresult on Test Log 4.3.3.15.2.8 Fail relay is energized 4.3.3.15.2.8.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNcOR RADIATION MANAGEMENT 123102 PROCEDURE,9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION 040M 1 49 of 246 PLN

4.3.3.15.2.9 Range indicator is off 4.3.3.15.2.9.1 Enter pass/fail in result on Test Log 4.3.3.15.2.10 Bargraph is red 4.3.3.15.2.10.1 Enter pass/fail in result on Test Log 4.3.3.15.2.11 Bargraph has 12 segments lit 4.3.3.15.2.11.1 Enter pass/fail in result on Test Log 4.3.3.15.2.12 Backlight is on RPh 4.3.3.15.2.12.1.1 Enter pass/fail in result on Test Log 4.3.3.15.2.13 Radiation value displayed on front panel is .101 RPh 4.3.3.15.2.13.1 Enter pass/fail in result on Test Log 4.3.3.15.2.14 Analog output I (4-20mA) is 16.81 ma 4.3.3.15.2.14.1 Enter pass/fail in result on Test Log 4.3.3.15.2.15 Analog output 2 (4-2OmA) is 16.81 ma 4.3.3.15.2.15.1 Enter pass/fail in result on Test Log 4.3.3.15.2.16 Analog output 3 (0-1OVdc) is 8.01 v 4.3.3.15.2.16.1 Enter pass/fail in result on Test Log 4.3.3.15.3 Set signal generator frequency to 15 Hz 4.3.3.15.4 Within one minute 4.3.3.15.4.1 Check source indicator is off 4.3.3.15.4.1.1 Enter pass/fail in result on Test Log 4.3.3.15.4.2 HIGH alarm indicator is flashing 4.3.3.15.4.2.1 Enter pass/fail in result on Test Log 4.3.3.15.4.3 HIGH alarm relay is de-energized 4.3.3.15.4.3.1 Enter pass/fail in result on Test Log 4.3.3.15.4.4 Auxiliary output is de-energized 4.3.3.15.4.4.1 Enter pass/fail in result on Test Log 4.3.3.15.4.5 WARN alarm indicator is flashing 4.3.3.15.4.5.1 Enter pass/fail in result on Test Log 4.3.3.15.4.6 WARN alarm relay is de-energized 4.3.3.15.4.6.1 Enter pass/fail in result on Test Log 4.3.3.15.4.7 Fail indicator is off 4.3.3.15.4.7.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR-RADIATiON MANAGEMENT - 10/23M2 PROCEDURE,-9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. TSIZE 1 3076 PRODUCTION 9451W 1 50 of 246 1 PLN

4.3.3.15.4.8 Fail relay is energized 4.3.3.15.4.8.1 Enter pass/fail in result on Test Log 4.3.3.15.4.9 Range indicator is off 4.3.3.15.4.9.1 Enter pass/fail in result on Test Log 4.3.3.15.4.10 Bargraph is red 4.3.3.15.4.10.1 Enter pass/fail in result on Test Log 4.3.3.15.4.11 Bargraph has 6 segments lit 4.3.3.15.4.11.1 Enter pass/fail in result on Test Log 4.3.3.15.4.12 Backlight is on mR/h 4.3.3.15.4.12.1.1 Enter pass/fail in result on Test Log 4.3.3.15.4.13 Radiation value displayed on front panel is .900 mR/h 4.3.3.15.4.13.1 Enter pass/fail in result on Test Log 4.3.3.15.4.14 Analog output 1 (4-2OmA) is 10.25 ma 4.3.3.15.4.14.1 Enter pass/fail in result on Test Log 4.3.3.15.4.15 Analog output 2 (4-2OmA) is 10.25 ma 4.3.3.15.4.15.1 Enter pass/fail in result on Test Log 4.3.3.15.4.16 Analog output 3 (0-1OVdc) is 3.91 v 4.3.3.15.4.16.1 Enter pass/fail in result on Test Log 4.3.3.15.4.17 Press ALARM ACKNOWLEDGE pushbutton 4.3.3.15.4.18 Check source indicator is off 4.3.3.15.4.18.1 Enter pass/fail in result on Test Log 4.3.3.15.4.19 HIGH alarm indicator is off 4.3.3.15.4.19.1 Enter pass/fail in result on Test Log 4.3.3.15.4.20 HIGH alarm relay is energized 4.3.3.15.4.20.1 Enter pass/fail in result on Test Log 4.3.3.15.4.21 Auxiliary output is energized 4.3.3.15.4.21.1 Enter pass/fail in result on Test Log 4.3.3.15.4.22 WARN alarm indicator is off 4.3.3.15.4.22.1 Enter pass/fail in result on Test Log 4.3.3.15.4.23 -WARN -alarm relay-is-energized 4.3.3.15.4.23.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 1/ROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION 94Z,, 51 of 246 PLN

4.3.3.15.4.24 Fail indicator is off 4.3.3.15.4.24.1 Enter pass/fail in result on Test Log 4.3.3.15.4.25 Fail relay is energized 4.3.3.15.4.25.1 Enter pass/fail in result on Test Log 4.3.3.15.4.26 Range indicator is off 4.3.3.15.4.26.1 Enter pass/fail in result on Test Log 4.3.3.15.4.27 Bargraph is green 4.3.3.15.4.27.1 Enter pass/fail in result on Test Log 4.3.3.15.4.28 Bargraph has 6 segments lit 4.3.3.15.4.28.1 Enter pass/fail in result on Test Log 4.3.3.15.4.29 Backlight is on mRJh 4.3.3.15.4.29.1 Enter pass/fail in result on Test Log 4.3.3.15.4.30 Radiation value displayed on front panel is .900 mR/h 4.3.3.15.4.30.1 Enter pass/fail in result on Test Log 4.3.3.15.4.31 Analog output I (4-20mA) is 10.25 ma 4.3.3.15.4.31.1 Enter pass/fail in result on Test Log 4.3.3.15.4.32 Analog output 2 (4-20mA) is 10.25 ma 4.3.3.15.4.32.1 Enter pass/fail in result on Test Log 4.3.3.15.4.33 Analog output 3 (0-1OVdc) is 3.91 v 4.3.3.15.4.33.1 Enter pass/fail in result on Test Log 4.3.3.16 Test 16: HIGH Alarm Condition 6 Normal -> Warn -> Acknowledge -> High -> Acknowledge -> Warn -> Normal 4.3.3.16.1 Set signal generator frequency to 331 Hz 4.3.3.16.2 Within one minute 4.3.3.16.2.1 Check source indicator is off 4.3.3.16.2.1.1 Enter pass/fail in result on Test Log 4.3.3.16.2.2 HIGH alarm indicator is off 4.3.3.16.2.2.1 Enter pass/fail in result on Test Log 4.3.3.16.2.3 HIGH alarm relay is energized 4.3.3.16.2.3.1 Enter pass/fail in result on Test Log 4.3.3.16.2.4 Auxiliary output is energized 4.3.3.16.2.4.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT -- - /2302 --PROCEDURE,-9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SI.E 1 3076 PRODUCTION M - 1 52 of 246 OI PLN

4.3.3.16.2.5 WARN alarm indicator is flashing 4.3.3.16.2.5.1 Enter pass/fail in result on Test Log 4.3.3.16.2.6 WARN alarm relay is de-energized 4.3.3.16.2.6.1 Enter pass/fail in result on Test Log 4.3.3.16.2.7 Fail indicator is off 4.3.3.16.2.7.1 Enter pass/fail in result on Test Log 4.3.3.16.2.8 Fail relay is energized 4.3.3.16.2.8.1 Enter pass/fail in result on Test Log 4.3.3.16.2.9 Range indicator is off 4.3.3.16.2.9.1 Enter pass/fail in result on Test Log 4.3.3.16.2.10 Bargraph is amber 4.3.3.16.2.10.1 Enter pass/fail in result on Test Log 4.3.3.16.2.11 Bargraph has 9 segments lit 4.3.3.16.2.11.1 Enter pass/fail in result on Test Log 4.3.3.16.2.12 Backlight is on mR/h 4.3.3.16.2.12.1 Enter pass/fail in result on Test Log 4.3.3.16.2.13 Radiation value displayed on front panel is 19.9 mR/h 4.3.3.16.2.13.1 Enter pass/fail in result on Test Log 4.3.3.16.2.14 Analog output 1 (4-20mA) is 14.55 ma 4.3.3.16.2.14.1 Enter pass/fail in result on Test Log 4.3.3.16.2.15 Analog output 2 (4-2OmA) is 14.55 ma 4.3.3.16.2.15.1 Enter pass/fail in result on Test Log 4.3.3.16.2.16 Analog output 3 (0-1OVdc) is 6.6 v 4.3.3.16.2.16.1 Enter pass/fail in result on Test Log 4.3.3.16.3 Press ALARM ACKNOWLEDGE pushbutton 4.3.3.16.4 Check source indicator is off 4.3.3.16.4.1 Enter pass/fail in result on Test Log 4.3.3.16.5 HIGH alarm indicator is off 4.3.3.16.5.1 Enter pass/fail in result on Test Log 4.3.3.16.6 HIGH alarm relay is energized 4.3.3.16.6.1 Enter pass/fail in result on Test Log 4.3.3.16.7 Auxiliary output is energized 4.3.3.16.7.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 1o/23/02 - -- PROCEDURE,-9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION 91%W' 53 of 246 PLN

4.3.3.16.8 WARN alarm indicator is on steady 4.3.3.16.8.1 Enter pass/fail in result on Test Log 4.3.3.16.9 WARN alarm relay is de-energized 4.3.3.16.9.1 Enter pass/fail in result on Test Log 4.3.3.16.10 Fail indicator is off 4.3.3.16.10.1 Enter pass/fail in result on Test Log 4.3.3.16.11 Fail relay is energized 4.3.3.16.11.1 Enter pass/fail in result on Test Log 4.3.3.16.12 Range indicator is off 4.3.3.16.12.1 Enter pass/fail in result on Test Log 4.3.3.16.13 Bargraph is amber 4.3.3.16.13.1 Enter pass/fail in result on Test Log 4.3.3.16.14 Bargraph has 9 segments lit 4.3.3.16.14.1 Enter pass/fail in result on Test Log 4.3.3.16.15 Backlight is on mR/h 4.3.3.16.15.1 Enter pass/fail in result on Test Log 4.3.3.16.16 Radiation value displayed on front panel is 19.9 mR/h 4.3.3.16.16.1 Enter pass/fail in result on Test Log 4.3.3.16.17 Analog output 1 (4-2OmA) is 14.55 ma 4.3.3.16.17.1 Enter pass/fail in result on Test Log 4.3.3.16.18 Analog output 2 (4-2OmA) is 14.55 ma 4.3.3.16.18.1 Enter pass/fail in result on Test Log 4.3.3.16.19 Analog output 3 (0-1OVdc) is 6.6 v 4.3.3.16.19.1 Enter pass/fail in result on Test Log 4.3.3.16.20 Set signal generator frequency to 1.68 kHz 4.3.3.16.21 Within one minute:

4.3.3.16.21.1 Check source indicator is off 4.3.3.16.21.1.1 --Enter pass/fail in result on Test Log 4.3.3.16.21.2 HIGH alarm indicator is flashing 4.3.3.16.21.2.1 Enter pass/fail in result on Test Log 4.3.3.16.21.3 HIGH alarm relay is de-energized 4.3.3.16.21.3.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT I/2302 - PROCEDURE;9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION I,9?,-,1,1 54 of 246 1 PLN

4.3.3.16.21.4 Auxiliary output is de-energized 4.3.3.16.21.4.1 Enter pass/fail in result on Test Log 4.3.3.16.21.5 WARN alarm indicator is on steady 4.3.3.16.21.5.1 Enter pass/fail in result on Test Log 4.3.3.16.21.6 WARN alarm relay is de-energized 4.3.3.16.21.6.1 Enter pass/fail in result on Test Log 4.3.3.16.21.7 Fail indicator is off 4.3.3.16.21.7.1 Enter pass/fail in result on Test Log 4.3.3.16.21.8 Fail relay is energized 4.3.3.16.21.8.1 Enter pass/fail in result on Test Log 4.3.3.16.21.9 Range indicator is off 4.3.3.16.21.9.1 Enter pass/fail in result on Test Log 4.3.3.16.21.10 Bargraph is red 4.3.3.16.21.10.1 Enter pass/fail in result on Test Log 4.3.3.16.21.11 Bargraph has 12 segments lit 4.3.3.16.21.11.1 Enter pass/fail in result on Test Log 4.3.3.16.21.12 Backlight is on R/h 4.3.3.16.21.12.1.1 Enter pass/fail in result on Test Log 4.3.3.16.21.13 Radiation value displayed on front panel is .101 R/h 4.3.3.16.21.13.1 Enter pass/fail in result on Test Log 4.3.3.16.21.14 Analog output 1 (4-2OmA) is 16.81 ma 4.3.3.16.21.14.1 Enter pass/fail in result on Test Log 4.3.3.16.21.15Analog output 2 (4-20mA) is 16.81 ma 4.3.3.16.21.15.1 Enter pass/fail in result on Test Log 4.3.3.16.21.16 Analog output 3 (0-1OVdc) is 8.01 v 4.3.3.16.21.16.1 Enter pass/fail in result on Test Log 4.3.3.16.21.17 Press ALARM ACKNOWLEDGE pushbutton 4.3.3.16.21.18 Check source indicator is off 4.3.3.16.21.18.1 Enter pass/fail in result on Test Log 4.3.3.16.21.19 HIGH alarm indicator is on steady 4.3.3.16.21.19.1- -E-nter pass/fail in result on Test Log 4.3.3.16.21.20 HIGH alarm relay is de-energized 4.3.3.16.21.20.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 1=3/02 -PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 6 3 3076 PRODUCTION .4( 55 of 246 9 0 VTP PLN

4.3.3.16.21.21 Auxiliary output is de-energized 4.3.3.16.21.21.1 Enter pass/fail in result on Test Log 4.3.3.16.21.22 WARN alarm indicator is on steady 4.3.3.16.21.22.1 Enter pass/fail in result on Test Log 4.3.3.16.21.23 WARN alarm relay is de-energized 4.3.3.16.21.23.1 Enter pass/fail in result on Test Log 4.3.3.16.21.24 Fail indicator is off 4.3.3.16.21.24.1 Enter pass/fail in result on Test Log 4.3.3.16.21.25 Fail relay is energized 4.3.3.16.21.25.1 Enter pass/fail in result on Test Log 4.3.3.16.21.26 Range indicator is off 4.3.3.16.21.26.1 Enter pass/fail in result on Test Log 4.3.3.16.21.27 Bargraph is red 4.3.3.16.21.27.1 , Enter pass/fail in result on Test Log 4.3.3.16.21.28 Bargraph has 12 segments lit 4.3.3.16.21.28.1 Enter pass/fail in result on Test Log 4.3.3.16.21.29 Backlight is on R/h 4.3.3.16.21.29.1 Enter pass/fail in result on Test Log 4.3.3.16.21.30 Radiation value displayed on front panel is .101 R/h 4.3.3.16.21.30.1 Enter pass/fail in result on Test Log 4.3.3.16.21.31 Analog output 1 (4-20mA) is 16.81 ma 4.3.3.16.21.31.1 Enter pass/fail in result on Test Log 4.3.3.16.21.32Analog output 2 (4-2OmA) is 16.81 ma 4.3.3.16.21.32.1 Enter pass/fail in result on Test Log 4.3.3.16.21.33 Analog output 3 (0-1OVdc) is 8.01 v 4.3.3.16.21.33.1 Enter pass/fail in result on Test Log 4.3.3.16.22 Set signal generator frequency to 331 Hz 4.3.3.16.23 Within one minute 4.3.3.16.23.1 Check source indicator is off 4.3.3.16.23.1.1 Enter pass/fail in result on Test Log 4.3.3.16.23.2 HIGH alarm indicator is off 4.3.3.16.23.2.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT --- 10/23102 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION MMW 56 of 246 PLN

4.3.3.16.23.3 HIGH alarm relay is energized 4.3.3.16.23.3.1 Enter pass/fail in result on Test Log 4.3.3.16.23.4 Auxiliary output is energized 4.3.3.16.23.4.1 Enter pass/fail in result on Test Log 4.3.3.16.23.5 WARN alarm indicator is on steady 4.3.3.16.23.5.1 Enter pass/fail in result on Test Log 4.3.3.16.23.6 WARN alarm relay is de-energized 4.3.3.16.23.6.1 Enter pass/fail in result on Test Log 4.3.3.16.23.7 Fail indicator is off 4.3.3.16.23.7.1 Enter pass/fail in result on Test Log 4.3.3.16.23.8 Fail relay is energized 4.3.3.16.23.8.1 Enter pass/fail in result on Test Log 4.3.3.16.23.9 Range indicator is off 4.3.3.16.23.9.1 Enter pass/fail in result on Test Log 4.3.3.16.23.10 Bargraph is amber 4.3.3.16.23.10.1 Enter pass/fail in result on Test Log 4.3.3.16.23.11 Bargraph has 9 segments lit 4.3.3.16.23.11.1 Enter pass/fail in result on Test Log 4.3.3.16.23.12 Backlight is on mR/h 4.3.3.16.23.12.1 Enter pass/fail in result on Test Log 4.3.3.16.23.13 Radiation value displayed on front panel is 19.9 mRJh 4.3.3.16.23.13.1 Enter pass/fail in result on Test Log 4.3.3.16.23.14 Analog output I (4-2OmA) is 14.55 ma 4.3.3.16.23.14.1 Enter pass/fail in result on Test Log 4.3.3.16.23.15 Analog output 2 (4-20mA) is 14.55 ma 4.3.3.16.23.15.1 Enter pass/fail in result on Test Log 4.3.3.16.23.16 Analog output 3 (0-10Vdc) is 6.6 v 4.3.3.16.23.16.1 Enter pass/fail in result on Test Log 4.3.3.16.24 Set signal generator frequency to 15 Hz 4.3.3.16.25 Within one minute 4.3.3.16.25.1 Check source indicator is off 4.3.3.16.25.1.1 Enter pass/fail in result on Test Log 4.3.3.16.25.2 HIGH alarm indicator is off 4.3.3.16.25.2.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 1 3/02 -SPROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION iiW41 57 of 246 94095603VTPP LN

4.3.3.16.25.3 HIGH alarm relay is energized 4.3.3.16.25.3.1 Enter pass/fail in result on Test Log 4.3.3.16.25.4 Auxiliary output is energized 4.3.3.16.25.4.1 Enter pass/fail in result on Test Log 4.3.3.16.25.5 WARN alarm indicator is off 4.3.3.16.25.5.1 Enter pass/fail in result on Test Log 4.3.3.16.25.6 WARN alarm relay is energized 4.3.3.16.25.6.1 Enter pass/fail in result on Test Log 4.3.3.16.25.7 Fail indicator is off 4.3.3.16.25.7.1 Enter pass/fail in result on Test Log 4.3.3.16.25.8 Fail relay is energized 4.3.3.16.25.8.1 Enter pass/fail in result on Test Log 4.3.3.16.25.9 Range indicator is off 4.3.3.16.25.9.1 Enter pass/fail in result on Test Log 4.3.3.16.25.10 Bargraph is green 4.3.3.16.25.10.1 Enter pass/fail in result on Test Log 4.3.3.16.25.11 Bargraph has 6 segments lit 4.3.3.16.25.11.1 Enter pass/fail in result on Test Log 4.3.3.16.25.12 Backlight is on mR/h 4.3.3.16.25.12.1 Enter pass/fail in result on Test Log 4.3.3.16.25.13 Radiation value displayed on front panel is .900 mR/h 4.3.3.16.25.13.1 Enter pass/fail in result on Test Log 4.3.3.16.25.14 Analog output 1 (4-20mA) is 10.25 ma 4.3.3.16.25.14.1 Enter pass/fail in result on Test Log 4.3.3.16.25.15 Analog output 2 (4-20mA) is 10.25 ma 4.3.3.16.25.15.1 Enter pass/fail in result on Test Log 4.3.3.16.25.16 Analog output 3 (0-10Vdc) is 3.91 v 4.3.3.16.25.16.1 -Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST

-SYNCORRADIATION MANAGEMENT - PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION ?04%01( 58 of 246 PLN

4.3.3.17 Test 17: HIGH Alarm Condition 7 Normal -> Warn -> High -> Acknowledge -> Warn -> Normal 4.3.3.17.1 Set signal generator frequency to 331 Hz 4.3.3.17.2 Within one minute 4.3.3.17.2.1 Check source indicator is off 4.3.3.17.2.1.1 Enter pass/fail in result on Test Log 4.3.3.17.2.2 HIGH alarm indicator is off 4.3.3.17.2.2.1 Enter pass/fail in result on Test Log 4.3.3.17.2.3 HIGH alarm relay is energized 4.3.3.17.2.3.1 Enter pass/fail in result on Test Log 4.3.3.17.2.4 Auxiliary output is energized 4.3.3.17.2.4.1 Enter pass/fail in result on Test Log 4.3.3.17.2.5 WARN alarm indicator is flashing 4.3.3.17.2.5.1 Enter pass/fail in result on Test Log 4.3.3.17.2.6 WARN alarm relay is de-energized 4.3.3.17.2.6.1 Enter pass/fail in result on Test Log 4.3.3.17.2.7 Fail indicator is off 4.3.3.17.2.7.1 Enter pass/fail in result on Test Log 4.3.3.17.2.8 Fail relay is energized 4.3.3.17.2.8.1 Enter pass/fail in result on Test Log 4.3.3.17.2.9 Range indicator is off 4.3.3.17.2.9.1 Enter pass/fail in result on Test Log 4.3.3.17.2.10 Bargraph is amber 4.3.3.17.2.10.1 Enter pass/fail in result on Test Log 4.3.3.17.2.11 bargraph has 9 segments lit 4.3.3.17.2.11.1 Enter pass/fail in result on Test Log 4.3.3.17.2.12 Backlight is on mR/h 4.3.3.17.2.12.1 Enter pass/fail in result on Test Log 4.3.3.17.2.13 Radiation value displayed on front panel is 19.9 mR/h 4.3.3.17.2.13.1 Enter pass/fail in result on Test Log 4.3.3.17.2.14 Analog output 1 (4-20mA) is 14.55 ma 4.3.3.17.2.14.1 Enter pass/fail in result on Test Log 4.3.3.17.2.15 Analog output 2 (4-2OmA) is 14.55 ma 4.3.3.17.2.15.1 Enter pass/fail in result on Test Log DATE 1 TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 10212 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET iT NO. SIZE 1 3076 PRODUCTION ."( 59 of 246 PLN

4.3.3.17.2.16 Analog output 3 (0-10Vdc) is 6.6 v 4.3.3.17.2.16.1 Enter pass/fail in result on Test Log 4.3.3.17.3 Set signal generator frequency to 1.68 kHz 4.3.3.17.4 Within one minute:

4.3.3.17.4.1 Check source indicator is off 4.3.3.17.4.1.1 Enter pass/fail in result on Test Log 4.3.3.17.4.2 HIGH alarm indicator is flashing 4.3.3.17.4.2.1 Enter pass/fail in result on Test Log 4.3.3.17.4.3 HIGH alarm relay is de-energized 4.3.3.17.4.3.1 Enter pass/fail in result on Test Log 4.3.3.17.4.4 Auxiliary output is de-energized 4.3.3.17.4.4.1 Enter pass/fail in result on Test Log 4.3.3.17.4.5 WARN alarm indicator is flashing 4.3.3.17.4.5.1 Enter pass/fail in result on Test Log 4.3.3.17.4.6 WARN alarm relay is de-energized 4.3.3.17.4.6.1 Enter pass/fail in result on Test Log 4.3.3.17.4.7 Fail indicator is off 4.3.3.17.4.7.1 Enter pass/fail in result on Test Log 4.3.3.17.4.8 Fail relay is energized 4.3.3.17.4.8.1 Enter pass/fail in result on Test Log 4.3.3.17.4.9 Range indicator is off 4.3.3.17.4.9.1 Enter pass/fail in result on Test Log 4.3.3.17.4.10 Bargraph is red 4.3.3.17.4.10.1 Enter pass/fail in result on Test Log 4.3.3.17.4.11 Bargraph has 12 segments lit 4.3.3.17.4.11.1 Enter pass/fail in result on Test Log 4.3.3.17.4.12 Backlight is on R/h 4.3.3.17.4.12.1.1 Enter pass/fail in result on Test Log 4.3.3.17.4.13 Radiation value displayed on front panel is .101 R/h 4.3.3.17.4.13.1 Enter pass/fail in result on Test Log 4.3.3.17.4.14 Analog output I (4-20mA) is 16.81 ma 4.3.3.17.4.14.1 Enter pass/fail in result on Test Log 4.3.3.17.4.15 Analog output 2 (4-20mA) is 16.81 ma 4.3.3.17.4.15.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT I PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET iSIZE NO.

1 3076 PRODUCTION &?_A1(f 60 of 246 PLN

4.3.3.17.4.16 Analog output 3 (0-1OVdc) is 8.01 v 4.3.3.17.4.16.1 Enter pass/fail in result on Test Log 4.3.3.17.4.17 Press ALARM ACKNOWLEDGE pushbutton 4.3.3.17.4.18 Check source indicator is off 4.3.3.17.4.18.1 Enter pass/fail in result on Test Log 4.3.3.17.4.19 HIGH alarm indicator is on steady 4.3.3.17.4.19.1 Enter pass/fail in result on Test Log 4.3.3.17.4.20 HIGH alarm relay is de-energized 4.3.3.17.4.20.1 Enter pass/fail in result on Test Log 4.3.3.17.4.21 Auxiliary output is de-energized 4.3.3.17.4.21.1 Enter pass/fail in result on Test Log 4.3.3.17.4.22 WARN alarm indicator is on steady 4.3.3.17.4.22.1 Enter pass/fail in result on Test Log 4.3.3.17.4.23 WARN alarm relay is de-energized 4.3.3.17.4.23.1 Enter pass/fail in result on Test Log 4.3.3.17.4.24 Fail indicator is off 4.3.3.17.4.24.1 Enter pass/fail in result on Test Log 4.3.3.17.4.25 Fail relay is energized 4.3.3.17.4.25.1 Enter pass/fail in result on Test Log 4.3.3.17.4.26 Range indicator is off 4.3.3.17.4.26.1 Enter pass/fail in result on Test Log 4.3.3.17.4.27 Bargraph is red 4.3.3.17.4.27.1 Enter pass/fail in result on Test Log 4.3.3.17.4.28 Bargraph has 12 segments lit 4.3.3.17.4.28.1 Enter pass/fail in result on Test Log 4.3.3.17.4.29 Backlight is on R/h 4.3.3.17.4.29.1.1 Enter pass/fail in result on Test Log 4.3.3.17.4.30- Radiation value displayed on front panel is 101mR/h 4.3.3.17.4.30.1 Enter pass/fail in result on Test Log 4.3.3.17.4.31 Analog output I (4-2OmA) is 16.81 ma 4.3.3.17.4.31.1- Enter pass/fail in result on Test Log 4.3.3.17.4.32 Analog output 2 (4-2OmA) is 16.81 ma 4.3.3.17.4.32.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT I - 3 "PROCEDURE, 9405603

-2 REV ECN NO. RELEASED FOR DOG CTRL SHEET NO. TSE 1 3076 PRODUCTION .14(( 61 of 246 PLN

4.3.3.17.4.33 Analog output 3 (0-1OVdc) is 8.01 v 4.3.3.17.4.33.1 Enter pass/fail in result on Test Log 4.3.3.17.5 Set signal generator frequency to 331 Hz 4.3.3.17.6 Within one minute 4.3.3.17.6.1 Check source irjdicator is off 4.3.3.17.6.1.1 Enter pass/fail in result on Test Log 4.3.3.17.6.2 HIGH alarm indicator is off 4.3.3.17.6.2.1 Enter pass/fail in result on Test Log 4.3.3.17.6.3 HIGH alarm relay is energized 4.3.3.17.6.3.1 Enter pass/fail in result on Test Log 4.3.3.17.6.4 Auxiliary output is energized 4.3.3.17.6.4.1 Enter pass/fail in result on Test Log 4.3.3.17.6.5 WARN alarm indicator is on steady 4.3.3.17.6.5.1 Enter pass/fail in result on Test Log 4.3.3.17.6.6 WARN alarm relay is de-energized 4.3.3.17.6.6.1 Enter pass/fail in result on Test Log 4.3.3.17.6.7 Fail indicator is off 4.3.3.17.6.7.1 Enter pass/fail in result on Test Log 4.3.3.17.6.8 Fail relay is energized 4.3.3.17.6.8.1 Enter pass/fail in result on Test Log 4.3.3.17.6.9 Range indicator is off 4.3.3.17.6.9.1 Enter pass/fail in result on Test Log 4.3.3.17.6.10 Bargraph is amber 4.3.3.17.6.10.1 Enter pass/fail in result on Test Log 4.3.3.17.6.11 Bargraph has 9 segments lit 4.3.3.17.6.11.1 Enter pass/fail in result on Test Log 4.3.3.17.6.12 Backlight is on mR/h 4.3.3.17.6.12.1 Enter pass/fail in result on Test Log 4.3.3.17.6.13 Radiation value displayed on front panel is 19.9 mR/h 4.3.3.17.6.13.1 Enter pass/fail in result on Test Log 4.3.3.17.6.14 Analog output I (4-2OmA) is 14.55 ma S--- 4.3.3.17.6.14.1-Enter-pass/fail in result on Test Log 4.3.3.17.6.15 Analog output 2 (4-20mA) is 14.55 ma 4.3.3.17.6.15.1 Enter pass/fail in result on Test Log DATE -I2LE SOFTWARE VALIDATION TEST SYNCOR-RADIATION MANAGEMENT 10t23102 PROCEDURE, 9405603 DOC CTRL SHEET NO. SIZE REV ECN NO. RELEASED FOR

,45,'f%{ 62 of 246 PLN 1 3076 PRODUCTION

4.3.3.17.6.16 Analog output 3 (0-1OVdc) is 6.6 v 4.3.3.17.6.16.1 Enter pass/fail in result on Test Log 4.3.3.17.7 Set signal generator frequency to 15.00 4.3.3.17.8 Within one minute 4.3.3.17.8.1 Check source indicator is off 4.3.3.17.8.1.1 Enter pass/fail in result on Test Log 4.3.3.17.8.2 HIGH alarm indicator is off 4.3.3.17.8.2.1 Enter pass/fail in result on Test Log 4.3.3.17.8.3 HIGH alarm relay is energized 4.3.3.17.8.3.1 Enter pass/fail in result on Test Log 4.3.3.17.8.4 Auxiliary output is energized 4.3.3.17.8.4.1 Enter pass/fail in result on Test Log 4.3.3.17.8.5 WARN alarm indicator is off 4.3.3.17.8.5.1 Enter pass/fail in result on Test Log 4.3.3.17.8.6 WARN alarm relay is energized 4.3.3.17.8.6.1 Enter pass/fail in result on Test Log 4.3.3.17.8.7 Fail indicator is off 4.3.3.17.8.7.1 Enter pass/fail in result on Test Log 4.3.3.17.8.8 Fail relay is energized 4.3.3.17.8.8.1 Enter pass/fail in result on Test Log 4.3.3.17.8.9 Range indicator is off 4.3.3.17.8.9.1 Enter pass/fail in result on Test Log 4.3.3.17.8.10 Bargraph is green 4.3.3.17.8.10.1 Enter pass/fail in result on Test Log 4.3.3.17.8.11 Bargraph has 6 segments lit 4.3.3.17.8.11.1 Enter pass/fail in result on Test Log 4.3.3.17.8.12 Backlight is on mR/h 4.3.3.17.8.12.1 Enter pass/fail in result on Test Log 4.3.3.17.8.13 Radiation value displayed on front panel is .900 mR/h 4.3.3.17.8.13.1 Enter pass/fail in result on Test Log 4.3.3.17.8.14 Analog output 1 (4-20mA) is 10.25 ma 4.3.3.17.8.14.1 Enter pass/fail in result on Test Log DATE = TITLE SOFTWARE VALIDATION TEST SYNCORRADIATION MANAGEMENT PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZ.E 1 3076 1PRODUCTION ,OZ,& 1 63 of 246 949P0VPLNi

4.3.3.17.8.15 Analog output 2 (4-20mA) is 10.25 ma 4.3.3.17.8.15.1 Enter pass/fail in result on Test Log 4.3.3.17.8.16 Analog output 3 (0-10Vdc) is 3.91 v 4.3.3.17.8.16.1 Enter pass/fail in result on Test Log 4.3.3.18 Test 18: HIGH Alarm Condition 8 Normal -> Warn -> High -> Warn -> Acknowledge -> Normal 4.3.3.18.1 Set signal generator frequency to 331 4.3.3.18.2 Within one minute 4.3.3.18.2.1 Check source indicator is off 4.3.3.18.2.1.1 Enter pass/fail in result on Test Log 4.3.3.18.2.2 HIGH alarm indicator is off 4.3.3.18.2.2.1 Enter pass/fail in result on Test Log 4.3.3.18.2.3 HIGH alarm relay is energized 4.3.3.18.2.3.1 Enter pass/fail in result on Test Log 4.3.3.18.2.4 Auxiliary output is energized 4.3.3.18.2.4.1 Enter pass/fail in result on Test Log 4.3.3.18.2.5 WARN alarm indicator is flashing 4.3.3.18.2.5.1 Enter pass/fail in result on Test Log 4.3.3.18.2.6 WARN alarm relay is de-energized 4.3.3.18.2.6.1 Enter pass/fail in result on Test Log 4.3.3.18.2.7 Fail indicator is off 4.3.3.18.2.7.1 Enter pass/fail in result on Test Log 4.3.3.18.2.8 Fail relay is energized 4.3.3.18.2.8.1 Enter pass/fail in result on Test Log 4.3.3.18.2.9 Range indicator is off 4.3.3.18.2.9.1 Enter pass/fail in result on Test Log 4.3.3:18.2.10 Bargraph is amber 4.3.3.18.2.10.1 Enter pass/fail in result on Test Log

-4.3.3.18.2.11-Bargraph has 9 segments lit

- - 4.3.3.18.2.11.1-Enter-pass/fail in result on Test Log 4.3.3.18.2.12 Backlight is on mR/h 4.3.3.18.2.12.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 1o2o2 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION I &?%I( 64 of 246 PLN

4.3.3.18.2.13 Radiation value displayed on front panel is 19.9 mR/h 4.3.3.18.2.13.1 Enter pass/fail in result on Test Log 4.3.3.18.2.14 Analog output 1 (4-2OmA) is 14.55 ma 4.3.3.18.2.14.1 Enter pass/fail in result on Test Log 4.3.3.18.2.15 Analog output 2 (4-2OmA) is 14.55 ma 4.3.3.18.2.15.1 Enter pass/fail in result on Test Log 4.3.3.18.2.16 Analog output 3 (0-10Vdc) is 6.6 v 4.3.3.18.2.16.1 Enter pass/fail in result on Test Log 4.3.3.18.3 Set signal generator frequency to 1.68 kHz 4.3.3.18.4 Within one minute:

4.3.3.18.4.1 Check source indicator is off 4.3.3.18.4.1.1 Enter pass/fail in result on Test Log 4.3.3.18.4.2 HIGH alarm indicator is flashing 4.3.3.18.4.2.1 Enter pass/fail in result on Test Log 4.3.3.18.4.3 HIGH alarm relay is de-energized 4.3.3.18.4.3.1 Enter pass/fail in result on Test Log 4.3.3.18.4.4 Auxiliary output is de-energized 4.3.3.18.4.4.1 Enter pass/fail in result on Test Log 4.3.3.18.4.5 WARN alarm indicator is flashing 4.3.3.18.4.5.1 Enter pass/fail in result on Test Log 4.3.3.18.4.6 WARN alarm relay is de-energized 4.3.3.18.4.6.1 Enter pass/fail in result on Test Log 4.3.3.18.4.7 Fail indicator is off 4.3.3.18.4.7.1 Enter pass/fail in result on Test Log 4.3.3.18.4.8 Fail relay is energized 4.3.3.18.4.8.1 Enter pass/fail in result on Test Log 4.3.3.18.4.9 Range indicator is off 4.3.3.18.4.9.1 Enter pass/fail in result on Test Log 4.3.3.18.4.10 Bargraph is red 4.3.3.18.4.10.1 Enter pass/fail in result on Test Log 4.3.3.18.4.11 Bargraph has 12 segments lit 4.3.3.18.4.11.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 103/02 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION I ,*(. 65 of 246 PLN

4.3.3.18.4.12 Backlight is on R/h 4.3.3.18.4.12.1.1 Enter pass/fail in result on Test Log 4.3.3.18.4.13 Radiation value displayed on front panel is .101 R/h 4.3.3.18.4.13.1 Enter pass/fail in result on Test Log 4.3.3.18.4.14 Analog output 1 (4-20mA) is 16.81 ma 4.3.3.18.4.14.1 Enter pass/fail in result on Test Log 4.3.3.18.4.15 Analog output 2 (4-2OmA) is 16.81 ma 4.3.3.18.4.15.1 Enter pass/fail in result on Test Log 4.3.3.18.4.16 Analog output 3 (0-1OVdc) is 8.01 v 4.3.3.18.4.16.1 Enter pass/fail in result on Test Log 4.3.3.18.5 Set signal generator frequency to 331 Hz 4.3.3.18.6 Within one minute 4.3.3.18.6.1 Check source indicator is off 4.3.3.18.6.1.1 Enter pass/fail in result on Test Log 4.3.3.18.6.2 HIGH alarm indicator is flashing 4.3.3.18.6.2.1 Enter pass/fail in result on Test Log 4.3.3.18.6.3 HIGH alarm relay is de-energized 4.3.3.18.6.3.1 Enter pass/fail in result on Test Log 4.3.3.18.6.4 Auxiliary output is de-energized 4.3.3.18.6.4.1 Enter pass/fail in result on Test Log 4.3.3.18.6.5 WARN alarm indicator is flashing 4.3.3.18.6.5.1 Enter pass/fail in result on Test Log 4.3.3.18.6.6 WARN alarm relay is de-energized 4.3.3.18.6.6.1 Enter pass/fail in result on Test Log 4.3.3.18.6.7 Fail indicator is off 4.3.3.18.6.7.1 Enter pass/fail in result on Test Log 4.3.3.18.6.8 Fail relay is energized 4.3.3.18.6.8.1 Enter pass/fail in result on Test Log 4.3.3.18.6.9 Range indicator is off 4.3.3.18.6.9.1 Enter pass/fail in result on Test Log 4.3.3.18.6.10 Bargraph is red

- 4.3.3.18.6.10.1 Enter pass/fail in result on Test Log 4.3.3.18.6.11 Bargraph has 9 segments lit 4.3.3.18.6.11.1 Enter pass/fail in result on Test Log DATE MTILE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 1o2/2 PROCEDURE, 9405603 SHEET NO. SIZE REV ECN NO. RELEASED FOR DOC CTRL

%'(( 66 of 246 PLN 1 3076 PRODUCTION _

4.3.3.18.6.12 Backlight is on mR/h 4.3.3.18.6.12.1 Enter pass/fail in result on Test Log 4.3.3.18.6.13 Radiation value displayed on front panel is 19.9 mR/h 4.3.3.18.6.13.1 Enter pass/fail in result on Test Log 4.3.3.18.6.14 Analog output I (4-20mA) is 14.55 ma 4.3.3.18.6.14.1 Enter pass/fail in result on Test Log 4.3.3.18.6.15 Analog output 2 (4-20mA) is 14.55 ma_

4.3.3.18.6.15.1 Enter pass/fail in result on Test Log 4.3.3.18.6.16 Analog output 3 (0-10Vdc) is 6.6 v 4.3.3.18.6.16.1 Enter pass/fail in result on Test Log 4.3.3.18.6.17 Press ALARM ACKNOWLEDGE pushbutton 4.3.3.18.6.18 Check source indicator is off 4.3.3.18.6.18.1 Enter pass/fail in result on Test Log 4.3.3.18.6.19 HIGH alarm indicator is off 4.3.3.18.6.19.1 Enter pass/fail in result on Test Log 4.3.3.18.6.20 HIGH alarm relay is energized 4.3.3.18.6.20.1 Enter pass/fail in result on Test Log 4.3.3.18.6.21 Auxiliary output is energized 4.3.3.18.6.21.1 Enter pass/fail in result on Test Log 4.3.3.18.6.22 WARN alarm indicator is on steady 4.3.3.18.6.22.1 Enter pass/fail in result on Test Log 4.3.3.18.6.23 WARN alarm relay is de-energized 4.3.3.18.6.23.1 Enter pass/fail in result on Test Log 4.3.3.18.6.24 Fail indicator is off 4.3.3.18.6.24.1 Enter pass/fail in result on Test Log 4.3.3.18.6.25 Fail relay is energized 4.3.3.18.6.25.1 Enter pass/fail in result on Test Log 4.3.3.18.6.26 Range indicator is off 4.3.3.18.6.26.1 Enter pass/fail in result on Test Log 4.3.3.18.6.27 Bargraph is amber 4.3.3.18.6.27.1 Enter pass/fail in result on Test Log 4.3.3.18.6.28 Bargraph has 9 segments lit 4.3.3.18.6.28.1 Enter pass/fail in result on Test Log i

DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT io o2 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. 940956SIZE PRODUCTION OYM1 67 of 246 PLN 1 3076

4.3.3.18.6.29 Backlight is on mR/h 4.3.3.18.6.29.1.1 Enter pass/fail in result on Test Log 4.3.3.18.6.30 Radiation value displayed on front panel is 19.9 mR/h 4.3.3.18.6.30.1 Enter pass/fail in result on Test Log 4.3.3.18.6.31 Analog output 1 (4-20mA) is 14.55 ma 4.3.3.18.6.31.1 Enter pass/fail in result on Test Log 4.3.3.18.6.32 Analog output 2 (4-2OmA) is 14.55 ma 4.3.3.18.6.32.1 Enter pass/fail in result on Test Log 4.3.3.18.6.33 Analog output 3 (0-10Vdc) is 6.6 v 4.3.3.18.6.33.1 Enter pass/fail in result on Test Log 4.3.3.18.7 Set signal generator frequency to 15 Hz 4.3.3.18.8 Within one minute 4.3.3.18.8.1 Check source indicator is off 4.3.3.18.8.1.1 Enter pass/fail in result on Test Log 4.3.3.18.8.2 HIGH alarm indicator is off 4.3.3.18.8.2.1 Enter pass/fail in result on Test Log 4.3.3.18.8.3 HIGH alarm relay is energized 4.3.3.18.8.3.1 Enter pass/fail in result on Test Log 4.3.3.18.8.4 Auxiliary output is energized 4.3.3.18.8.4.1 Enter pass/fail in result on Test Log 4.3.3.18.8.5 WARNalarm indicator is off 4.3.3.18.8.5.1 Enter pass/fail in result on Test Log 4.3.3.18.8.6 WARN alarm relay is energized 4.3.3.18.8.6.1 Enter pass/fail in result on Test Log 4.3.3.18.8.7 Fail indicator is off 4.3.3.18.8.7.1 Enter pass/fail in result on Test Log 4.3.3.18.8.8 Fail relay is energized 4.3.3.18.8.8.1 Enter pass/fail in result on Test Log 4.3.3.18.8.9 Range indicator is off 4.3.3.18.8.9.1 Enter pass/fail in result on Test Log 4.3.3.18.8.10- Bargraph is green 4.3.3.18.8.10.1 Enter pass/fail in result on Test Log DATE 1 TITLE SOFTWARE VALIDATION TEST SYNCOR RIATION MANAGEMENT I I' 2 PROCEDURE, 9405603 REV ECN NO. NO. SIZE 94095603VTP PLN 1 3076 0

4.3.3.18.8.11 Bargraph has 6 segments lit 4.3.3.18.8.11.1 Enter pass/fail in result on Test Log 4.3.3.18.8.12 Backlight is on mR/h 4.3.3.18.8.12.1 Enter pass/fail in result on Test Log 4.3.3.18.8.13 Radiation value displayed on front panel is .900 mR/h 4.3.3.18.8.13.1 Enter pass/fail in result on Test Log 4.3.3.18.8.14 Analog output I (4-2OmA) is 10.25 ma 4.3.3.18.8.14.1 Enter pass/fail in result on Test Log 4.3.3.18.8.15 Analog output 2 (4-20mA) is 10.25 ma 4.3.3.18.8.15.1 Enter pass/fail in result on Test Log 4.3.3.18.8.16 Analog output 3 (0-1OVdc) is 3.91 v 4.3.3.18.8.16.1 Enter pass/fail in result on Test Log 4.3.3.19 Test 19: HIGH Alarm Condition 9 Normal -> Warn -> High -> Wam -> Normal -> Acknowledge 4.3.3.19.1 Set signal generator frequency to 331 Hz 4.3.3.19.2 Within one minute 4.3.3.19.2.1 Check source indicator is off 4.3.3.19.2.1.1 Enter pass/fail in result on Test Log 4.3.3.19.2.2 HIGH alarm indicator is off 4.3.3.19.2.2.1 Enter pass/fail in result on Test Log 4.3.3.19.2.3 HIGH alarm relay is energized 4.3.3.19.2.3.1 Enter pass/fail in result on Test Log 4.3.3.19.2.4 Auxiliary output is energized 4.3.3.19.2.4.1 Enter pass/fail in result on Test Log 4.3.3.19.2.5 WARN alarm indicator is flashing 4.3.3.19.2.5.1 Enter pass/fail in result on Test Log 4.3.3.19.2.6 WARN alarm relay is de-energized 4.3.3.19.2.6.1 Enter pass/fail in result on Test Log 4.3.3.19.2.7 Fail indicator is off 4.3.3.19.2.7.1 Enter pass/fail in result on Test Log 4.3.3.19.2.8 -Fail Telayis-energized 4.3.3.19.2.8.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT I PROCEDURE, 9405603 NO. SIZE REV 1

ECN NO.

3076 I~zPLN 94095603VTP

4.3.3.19.2.9 Range indicator is off 4.3.3.19.2.9.1 Enter pass/fail in result on Test Log 4.3.3.19.2.10 Bargraph is amber 4.3.3.19.2.10.1 Enter pass/fail in result on Test Log 4.3.3.19.2.11 Bargraph has 9 segments lit 4.3.3.19.2.11.1 Enter pass/fail in result on Test Log 4.3.3.19.2.12 Backlight is on mRPh 4.3.3.19.2.12.1 Enter pass/fail in result on Test Log 4.3.3.19.2.13 Radiation value displayed on front panel is 19.9 mR/h 4.3.3.19.2.13.1 Enter pass/fail in result on Test Log 4.3.3.19.2.14 Analog output 1 (4-2OmA) is 14.55 ma 4.3.3.19.2.14.1 Enter pass/fail in result on Test Log 4.3.3.19.2.15 Analog output 2 (4-20mA) is 14.55 ma 4.3.3.19.2.15.1 Enter pass/fail in result on Test Log 4.3.3.19.2.16 Analog output 3 (0-1OVdc) is 6.6 v 4.3.3.19.2.16.1 Enter pass/fail in result on Test Log 4.3.3.19.3 Set signal generator frequency to 1.68 kHz 4.3.3.19.4 Within one minute:

4.3.3.19.4.1 Check source indicator is off 4.3.3.19.4.1.1 Enter pass/fail in result on Test Log 4.3.3.19.4.2 HIGH alarm indicator is flashing 4.3.3.19.4.2.1 Enter pass/fail in result on Test Log 4.3.3.19.4.3 HIGH alarm relay is de-energized 4.3.3.19.4.3.1 Enter pass/fail in result on Test Log 4.3.3.19.4.4 Auxiliary output is de-energized 4.3.3.19.4.4.1 Enter pass/fail in result on Test Log 4.3.3.19.4.5 WARN alarm indicator is flashing 4.3.3.19.4.5.1 Enter pass/fail in result on Test Log 4.3.3.19.4.6 WARN alarm relay is de-energized 4.3.3.19.4.6.1 Enter pass/fail in result on Test Log 4.3.3.19.4.7 Fail indicator is off

-433:319.43-Al-Enter pass/fail in result on Test Log 4.3.3.19.4.8 Fail relay is energized 4.3.3.19.4.8.1 Enter pass/fail in result on Test Log DATE 0TILE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 103,,2 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET :II ZZP NO.

940956 SdZE PLN 1 3076 PRODUCTION ,.01_1.1le 70 of 246

4.3.3.19.4.9 Range indicator is off 4.3.3.19.4.9.1 Enter pass/fail in result on Test Log 4.3.3.19.4.10 Bargraph is red 4.3.3.19.4.10.1 Enter pass/fail in result on Test Log 4.3.3.19.4.11 Bargraph has 12 segments lit 4.3.3.19.4.11.1 Enter pass/fail in result on Test Log 4.3.3.19.4.12 Backlight is on R/h 4.3.3.19.4.12.1.1 Enter pass/fail in result on Test Log 4.3.3.19.4.13 Radiation value displayed on front panel is .101 R/h 4.3.3.19.4.13.1 Enter pass/fail in result on Test Log 4.3.3.19.4.14 Analog output 1 (4-2OmA) is 16.81 ma 4.3.3.19.4.14.1 Enter pass/fail in result on Test Log 4.3.3.19.4.15 Analog output 2 (4-20mA) is 16.81 ma 4.3.3.19.4.15.1 Enter pass/fail in result on Test Log 4.3.3.19.4.16 Analog output 3 (0-1OVdc) is 8.01 v 4.3.3.19.4.16.1 Enter pass/fail in result on Test Log 4.3.3.19.5 Set signal generator frequency to 331 Hz 4.3.3.19.6 Within one minute 4.3.3.19.6.1 Check source indicator is off 4.3.3.19.6.1.1 Enter pass/fail in result on Test Log 4.3.3.19.6.2 HIGH alarm indicator is flashing 4.3.3.19.6.2.1 Enter pass/fail in result on Test Log 4.3.3.19.6.3 HIGH alarm relay is de-energized 4.3.3.19.6.3.1 Enter pass/fail in result on Test Log 4.3.3.19.6.4 Auxiliary output is de-energized 4.3.3.19.6.4.1 Enter pass/fail in result on Test Log 4.3.3.19.6.5 WARN alarm indicator is flashing 4.3.3.19.6.5.1 Enter pass/fail in result on Test Log 4.3.3.19.6.6 WARN alarm relay is de-energized 4.3.3.19.6.6.1 Enter pass/fail in result on Test Log

-- 4.3.3;19.6.-FaiI indicator is off

-4.3.3_19.6.&L-7-Enter-pass/fail in result on -Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 10212 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 3076 PRODUCTION I 0?ir( 71 of 246 9063VP PLN

4.3.3.19.6.8 Fail relay is energized 4.3.3.19.6.8.1 Enter pass/fail in result on Test Log 4.3.3.19.6.9 Range indicator is off 4.3.3.19.6.9.1 Enter pass/fail in result on Test Log 4.3.3.19.6.10 Bargraph is red 4.3.3.19.6.10.1 Enter pass/fail in result on Test Log 4.3.3.19.6.11 Bargraph has 9 segments lit 4.3.3.19.6.11.1 Enter pass/fail in result on Test Log 4.3.3.19.6.12 Backlight is on mR/h 4.3.3.19.6.12.1 Enter pass/fail in result on Test Log 4.3.3.19.6.13 Radiation value displayed on front panel is 19.9 mR/h 4.3.3.19.6.13.1 Enter pass/fail in result on Test Log 4.3.3.19.6.14 Analog output I (4-2OmA) is 14.55 ma 4.3.3.19.6.14.1 Enter pass/fail in result on Test Log 4.3.3.19.6.15 Analog output 2 (4-2OmA) is 14.55 ma 4.3.3.19.6.15.1 Enter pass/fail in result on Test Log 4.3.3.19.6.16 Analog output 3 (0-10Vdc) is 6.6 v 4.3.3.19.6.16.1 Enter pass/fail in result on Test Log 4.3.3.19.7 Set signal generator frequency to 15 Hz 4.3.3.19.8 -Within one-minute 4.3.3.19.8.1 Check source indicator is off 4.3.3.19.8.1.1 Enter pass/fail in result on Test Log 4.3.3.19.8.2 HIGH alarm indicator is flashing 4.3.3.19.8.2.1 Enter pass/fail in result on Test Log 4.3.3.19.8.3 HIGH alarm relay is de-energized 4.3.3.19.8.3.1 Enter pass/fail in result on Test Log 4.3.3.19.8.4 Auxiliary output is de-energized 4.3.3.19.8.4.1 Enter pass/fail in result on Test Log 4.3.3.19.8.5 WARN alarm indicator is flashing 4.3.3.19.8.5.1 Enter pass/fail in result on Test Log 4.3.3.19.8.6-WARN-alarm relay is de-energized 4.3.3.19.8.6.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT lo PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION *¥1~(( 72 of 246 94095603VTP PLN

4.3.3.19.8.7 Fail indicator is off 4.3.3.19.8.7.1 Enter pass/fail in result on Test Log 4.3.3.19.8.8 Fail relay is energized 4.3.3.19.8.8.1 Enter pass/fail in result on Test Log 4.3.3.19.8.9 Range indicator is off 4.3.3.19.8.9.1 Enter pass/fail in result on Test Log 4.3.3.19.8.10 Bargraph is red 4.3.3.19.8.10.1 Enter pass/fail in result on Test Log 4.3.3.19.8.11 Bargraph has 6 segments lit 4.3.3.19.8.11.1 Enter pass/fail in result on Test Log 4.3.3.19.8.12 Backlight is on mR/h 4.3.3.19.8.12.1 Enter pass/fail in result on Test Log 4.3.3.19.8.13 Radiation value displayed on front panel is .900 mR/h 4.3.3.19.8.13.1 Enter pass/fail in result on Test Log 4.3.3.19.8.14 Analog output 1 (4-2OmA) is 10.25 ma 4.3.3.19.8.14.1 Enter pass/fail in result on Test Log 4.3.3.19.8.15 Analog output 2 (4-2OmA) is 10.25 ma 4.3.3.19.8.15.1 Enter pass/fail in result on Test Log 4.3.3.19.8.16 Analog output 3 (0-1OVdc) is 3.91 v 4.3.3.19.8.16.1 Enter pass/fail in result on Test Log 4.3.3.19.9 Press ALARM ACKNOWLEDGE pushbutton 4.3.3.19.10 Check source indicator is off 4.3.3.19.10.1 Enter pass/fail in result on Test Log 4.3.3.19.11 HIGH alarm indicator is off 4.3.3.19.11.1 Enter pass/fail in result on Test Log 4.3.3.19.12 HIGH alarm relay is energized 4.3.3.19.12.1 Enter pass/fail in result on Test Log 4.3.3.19.13 Auxiliary output is energized 4.3.3.19.13.1 Enter pass/fail in result on Test Log 4.3.3.19.14 WARN alarm indicator is off 4.3.319.14.1 Enter pa-s/fail in-result on Test Log 4.3.3.19.15 WARN alarm relay is energized 4.3.3.19.15.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNcOR RADIATION MANAGEMENT 10/22 PROCEDURE,-9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION 94-Mwf, 73 of 246 94095603VTP PLN

4.3.3.19.16 Fail indicator is off 4.3.3.19.16.1 Enter pass/fail in result on Test Log 4.3.3.19.17 Fail relay is energized 4.3.3.19.17.1 Enter pass/fail in result on Test Log 4.3.3.19.18 Range indicator is off 4.3.3.19.18.1 Enter pass/fail in result on Test Log 4.3.3.19.19 Bargraph is green 4.3.3.19.19.1 Enter pass/fail in result on Test Log 4.3.3.19.20 Bargraph has 6 segments lit 4.3.3.19.20.1 Enter pass/fail in result on Test Log 4.3.3.19.21 Backlight is on mR/h 4.3.3.19.21.1 Enter pass/fail in result on Test Log 4.3.3.19.22 Radiation value displayed on front panel is .900 mRJh 4.3.3.19.22.1 Enter pass/fail in result on Test Log 4.3.3.19.23 Analog output I (4-2OmA) is 10.25 ma 4.3.3.19.23.1 Enter pass/fail in result on Test Log 4.3.3.19.24 Analog output 2 (4-2OmA) is 10.25 ma 4.3.3.19.24.1 Enter pass/fail in result on Test Log 4.3.3.19.25 Analog output 3 (0-1OVdc) is 3.91 v 4.3.3.19.25.1 Enter pass/fail in result on Test Log 4.3.3.20 Test 20: HIGH Alarm Condition 10 Normal -> High -> Acknowledge -> Warn -> Normal 4.3.3.20.1 Set signal generator frequency to 1.68 kHz 4.3.3.20.2 Within one minute:

4.3.3.20.2.1 Check source indicator is off 4.3.3.20.2.1.1 Enter pass/fail in result on Test Log 4.3.3.20.2.2 HIGH alarm indicator is flashing 4.3.3.20.2.2.1 Enter pass/fail in result on Test Log 4.3.3.20.2.3 HIGH alarm relay is de-energized 4.3.3.20.2.3.1 Enter pass/fail in result on Test Log 4.3.3.20.2.4 Auxiliary output is de-energied 4.3.3.20.2.4.1 Enter pass/fail in result on Test Log DATE TITLE SOFiWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT .. .Y23'0 2 PROCEDURE,-9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. 94095603VP PLN SIE 6?I.'f 74 of 246 1 3076 PRODUCTION

4.3.3.20.2.5 WARN alarm indicator is flashing 4.3.3.20.2.5.1 Enter pass/fail in result on Test Log 4.3.3.20.2.6 WARN alarm relay is de-energized 4.3.3.20.2.6.1 Enter pass/fail in result 6n Test Log 4.3.3.20.2.7 Fail indicator is off 4.3.3.20.2.7.1 Enter pass/fail in result on Test Log 4.3.3.20.2.8 Fail relay is energized 4.3.3.20.2.8.1 Enter pass/fail in result on Test Log 4.3.3.20.2.9 Range indicator is off 4.3.3.20.2.9.1 Enter pass/fail in result on Test Log 4.3.3.20.2.10 Bargraph is red 4.3.3.20.2.10.1 Enter pass/fail in result on Test Log 4.3.3.20.2.11 Bargraph has 12 segments lit 4.3.3.20.2.11.1 Enter pass/fail in result on Test Log 4.3.3.20.2.12 Backlight is on R/h 4.3.3.20.2.12.1.1 Enter pass/fail in result on Test Log 4.3.3.20.2.13 Radiation value displayed on front panel is .101 R/h 4.3.3.20.2.13.1 Enter pass/fail in result on Test Log 4.3.3.20.2.14 Analog output I (4-2OmA) is 16.81 ma 4.3.3.20.2.14.1 Enter pass/fail in result on Test Log 4.3.3.20.2.15 Analog output 2 (4-20mA) is 16.81 ma 4.3.3.20.2.15.1 Enter pass/fail in result on Test Log 4.3.3.20.2.16 Analog output 3 (0-1OVdc) is 8.01 v 4.3.3.20.2.16.1 Enter pass/fail in result on Test Log 4.3.3.20.3 Press ALARM ACKNOWLEDGE pushbutton 4.3.3.20.4 Check source indicator is off 4.3.3.20.4.1 Enter pass/fail in result on Test Log 4.3.3.20.5 HIGH alarm indicator is on steady 4.3.3.20.5.1 Enter pass/fail in result on Test Log 4.3.3.20.6 HIGH alarm relay is de-energized 4.3.3.20.6.1 Enter pass/fail in result on Test Log 4.3.3.20.7 Auxiliary output is de-energized 4.3.3.20.7.1 Enter pass/fail in result on Test Log DATE 0TILE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 1o/23/02 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SE 1 3076 PRODUCTION ,yall.W 75 of 246 4 PLN

4.3.3.20.8 WARN alarm indicator is on steady 4.3.3.20.8.1 Enter pass/fail in result on Test Log 4.3.3.20.9 WARN alarm relay is de-energized 4.3.3.20.9.1 Enter pass/fail in result on Test Log 4.3.3.20.10 Fail indicator is off 4.3.3.20.10.1 Enter pass/fail in result on Test Log 4.3.3.20.11 Fail relay is energized 4.3.3.20.11.1 Enter pass/fail in result on Test Log 4.3.3.20.12 Range indicator is off 4.3.3.20.12.1 Enter pass/fail in result on Test Log 4.3.3.20.13 Bargraph is red 4.3.3.20.13.1 Enter pass/fail in result on Test Log 4.3.3.20.14 Bargraph has 12 segments lit 4.3.3.20.14.1 Enter pass/fail in result on Test Log 4.3.3.20.15 Backlight is on R/h 4.3.3.20.15.1 Enter pass/fail in result on Test Log 4.3.3.20.16 Radiation value displayed on front panel is .101 R/h 4.3.3.20.16.1 Enter pass/fail in result on Test Log 4.3.3.20.17 Analog output I (4-2OmA) is 16.81 ma 4.3.3.20.17.1 Enter pass/fail in result on Test Log 4.3.3.20.18 Analog output 2 (4-2OmA) is 16.81 ma 4.3.3.20.18.1 Enter pass/fail in result on Test Log 4.3.3.20.19 Analog output 3 (0-1OVdc) is 8.01 v 4.3.3.20.19.1 Enter pass/fail in result on Test Log 4.3.3.20.20 Set signal generator frequency to 331 Hz 4.3.3.20.21 Within one minute 4.3.3.20.21.1 Check source indicator is off 4.3.3.20.21.1.1 Enter pass/fail in result on Test Log 4.3.3.20.21.2 HIGH alarm indicator is off 4.3.3.20.21.2.1 Enter pass/fail in result on Test Log 4.3.3.20.21.3 HIGH alarm relay is energized 4.3.3.20.21.3.1- Enter pass/fail in result on Test Log 4.3.3.20.21.4 Auxiliary output is energized 4.3.3.20.21.4.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT Io 3/02 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION 9w,.4f 76 of 246 94095603VTP PLN

4.3.3.20.21.5 WARN alarm indicator is on steady 4.3.3.20.21.5.1 Enter pass/fail in result on Test Log 4.3.3.20.21.6 WARN alarm relay is de-energized 4.3.3.20.21.6.1 Enter pass/fail in result on Test Log 4.3.3.20.21.7 Fail indicator is off 4.3.3.20.21.7.1 Enter pass/fail in result on Test Log 4.3.3.20.21.8 Fail relay is energized 4.3.3.20.21.8.1 Enter pass/fail in result on Test Log 4.3.3.20.21.9 Range indicator is off 4.3.3.20.21.9.1 Enter pass/fail in result on Test Log 4.3.3.20.21.10 Bargraph is amber 4.3.3.20.21.10.1 Enter pass/fail in result on Test Log 4.3.3.20.21.11 Bargraph has 9 segments lit 4.3.3.20.21.11.1 Enter pass/fail in result on Test Log 4.3.3.20.21.12 Backlight is on mR/h 4.3.3.20.21.12.1 Enter pass/fail in result on Test Log 4.3.3.20.21.13 Radiation value displayed on front panel is 19.9 mR/h 4.3.3.20.21.13.1 Enter pass/fail in result on Test Log 4.3.3.20.21.14 Analog output I (4-20mA) is 14.55 ma 4.3.3.20.21.14.1 Enter pass/fail in result on Test Log 4.3.3.20.21.15Analog output 2 (4-2OmA) is 14.55 ma 4.3.3.20.21.15.1 Enter pass/fail in result on Test Log 4.3.3.20.21.16 Analog output 3 (0-1OVdc) is 6.6 v 4.3.3.20.21.16.1 Enter pass/fail in result on Test Log 4.3.3.20.22 Set signal generator frequency to 15 Hz 4.3.3.20.23 Within one minute 4.3.3.20.23.1 Check source indicator is off 4.3.3.20.23.1.1 Enter pass/fail in result on Test Log 4.3.3.20.23.2 HIGH alarm indicator is off 4.3.3.20.23.2.1 Enter pass/fail in result on Test Log 4.3.3.20.23.3 HIGH alarm relay is energized 433.3320.23.3.1- Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 10/302 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 31076 PRODUCTION 94%*YX 77 of 246 IIPLN 94095603V'7P P

4.3.3.20.23.4 Auxiliary output is energized 4.3.3.20.23.4.1 Enter pass/fail in result on Test Log 4.3.3.20.23.5 WARN alarm indicator is off 4.3.3.20.23.5.1 Enter pass/fail in result on Test Log 4.3.3.20.23.6 WARN alarm relay is energized 4.3.3.20.23.6.1 Enter pass/fail in result on Test Log 4.3.3.20.23.7 Fail indicator is off 4.3.3.20.23.7.1 Enter pass/fail in result on Test Log 4.3.3.20.23.8 Fail relay is energized 4.3.3.20.23.8.1 Enter pass/fail in result on Test Log 4.3.3.20.23.9 Range indicator is off 4.3.3.20.23.9.1 Enter pass/fail in result on Test Log 4.3.3.20.23.10 Bargraph is green 4.3.3.20.23.10.1 Enter pass/fail in result on Test Log 4.3.3.20.23.11 Bargraph has 6 segments lit 4.3.3.20.23.11.1 Enter pass/fail in result on Test Log 4.3.3.20.23.12 Backlight is on mR/h 4.3.3.20.23.12.1 Enter pass/fail in result on Test Log 4.3.3.20.23.13 Radiation value displayed on front panel is .900 mR/h 4.3.3.20.23.13.1 Enter pass/fail in result on Test Log 4.3.3.20.23.14 Analog output I (4-2OmA) is 10.25 ma 4.3.3.20.23.14.1 Enter pass/fail in result on Test Log 4.3.3.20.23.15 Analog output 2 (4-20mA) is 10.25 ma 4.3.3.20.23.15.1 Enter pass/fail in result on Test Log 4.3.3.20.23.16 Analog output 3 (0-1OVdc) is 3.91 v 4.3.3.20.23.16.1 Enter pass/fail in result on Test Log 4.3.3.21 Test 21: HIGH Alarm Condition 11 Normal ->-High -> Wamrn->_Acknowledge->Normal 4.3.3.21.1 Set signal generator frequency to 1.68 kHz 4.3.3.21.2 Within one minute:

DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT Io3Io2 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION ,,yk?'t 78 of 246 94095603VTP PLN

4.3.3.21.2.1 Check source indicator is off 4.3.3.21.2.1.1 Enter pass/fail in result bn Test Log 4.3.3.21.2.2 HIGH alarm indicator is flashing 4.3.3.21.2.2.1 Enter pass/fail in result on Test Log 4.3.3.21.2.3 HIGH alarm relay is de-energized 4.3.3.21.2.3.1 Enter pass/fail in result on Test Log 4.3.3.21.2.4 Auxiliary output is de-energized 4.3.3.21.2.4.1 Enter pass/fail in result on Test Log 4.3.3.21.2.5 WARN alarm indicator is flashing 4.3.3.21.2.5.1 Enter pass/fail in result on Test Log 4.3.3.21.2.6 WARN alarm relay is de-energized 4.3.3.21.2.6.1 Enter pass/fail in result on Test Log 4.3.3.21.2.7 Fail indicator is off 4.3.3.21.2.7.1 Enter pass/fail in result on Test Log 4.3.3.21.2.8 Fail relay is energized 4.3.3.21.2.8.1 Enter pass/fail in result on Test Log 4.3.3.21.2.9 Range indicator is off 4.3.3.21.2.9.1 Enter pass/fail in result on Test Log 4.3.3.21.2.10 Bargraph is red 4.3.3.21.2.10.1 Enter pass/fail in result on Test Log 4.3.3.21.2.11 Bargraph has 12 segments lit 4.3.3.21.2.11.1 Enter pass/fail in result on Test Log 4.3.3.21.2.12 Backlight is on R/h 4.3.3.21.2.12.1.1 Enter pass/fail in result on Test Log 4.3.3.21.2.13 Radiation value displayed on front panel is .101 R/h 4.3.3.21.2.13.1 Enter pass/fail in result on Test Log 4.3.3.21.2.14 Analog output I (4-2OmA) is 16.81 ma 4.3.3.21.2.14.1 Enter pass/fail in result on Test Log 4.3.3.21.2.15 Analog output 2 (4-20mA) is 16.81 ma 4.3.3.21.2.15.1 Enter pass/fail in result on Test Log 4.3.3.21.2.16 Analog output 3 (0-10Vdc) is 8.01 v 43.3.21;2.16.1--Enter-pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 1 3Jo2 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. TSIZE 1 3076 PRODUCTION i*1f 79 of 246 PLN

4.3.3.21.3 Set signal generator frequency to 331 Hz 4.3.3.21.4 Within one minute 4.3.3.21.4.1 Check source indicator is off 4.3.3.21.4.1.1 Enter pass/fail in result on Test Log 4.3.3.21.4.2 HIGH alarm indicator is flashing 4.3.3.21.4.2.1 Enter pass/fail in result on Test Log 4.3.3.21.4.3 HIGH alarm relay is de-energized 4.3.3.21.4.3.1 Enter pass/fail in result on Test Log 4.3.3.21.4.4 Auxiliary output is de-energized 4.3.3.21.4.4.1 Enter pass/fail in result on Test Log 4.3.3.21.4.5 WARN alarm indicator is flashing 4.3.3.21.4.5.1 Enter pass/fail in result on Test Log 4.3.3.21.4.6 WARN alarm relay is de-energized 4.3.3.21.4.6.1 Enter pass/fail in result on Test Log 4.3.3.21.4.7 Fail indicator is off 4.3.3.21.4.7.1 Enter pass/fail in result on Test Log 4.3.3.21.4.8 Fail relay is energized 4.3.3.21.4.8.1 Enter pass/fail in result on Test Log 4.3.3.21.4.9 Range indicator is off 4.3.3.21.4.9.1 Enter pass/fail in result on Test Log 4.3.3.21.4.10 Bargraph is red 4.3.3.21.4.10.1 Enter pass/fail in result on Test Log 4.3.3.21.4.11 Bargraph has 9 segments lit 4.3.3.21.4.11.1 Enter pass/fail in result on Test Log 4.3.3.21.4.12 Backlight is on mRPh 4.3.3.21.4.12.1 Enter pass/fail in result on Test Log 4.3.3.21.4.13 Radiation value displayed on front panel is 19.9 mR/h 4.3.3.21.4.13.1 Enter pass/fail in result on Test Log 4.3.3.21.4.14 Analog output 1 (4-20mA) is 14.55 ma 4.3.3.21.4.14.1 Enter pass/fail in result on Test Log 4.3.3.21.4.15 Analog output 2 (4-20mA) is 14.55 ma 4.3.3.21.4.15.1 Enter pass/fail in result on Test Log 4.3.3.21.4.16 Analog output 3 (0-1OVdc) is 6.6 v 4.3.3.21.4.16.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 1o2/2 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET No. SIZE 1 3076 PRODUCTION gay' 80 of 246 PLN

4.3.3.21.5 Press ALARM ACKNOWLEDGE pushbutton 4.3.3.21.6 Check source indicator is off 4.3.3.21.6.1 Enter pass/fail in result on Test Log 4.3.3.21.7 HIGH alarm indicator is off 4.3.3.21.7.1 Enter pass/fail in result on Test Log 4.3.3.21.8 HIGH alarm relay is energized 4.3.3.21.8.1 Enter pass/fail in result on Test Log 4.3.3.21.9 Auxiliary output is energized 4.3.3.21.9.1 Enter pass/fail in result on Test Log 4.3.3.21.10 WARN alarm indicator is on steady 4.3.3.21.10.1 Enter pass/fail in result on Test Log 4.3.3.21.11 WARN alarm relay is de-energized 4.3.3.21.11.1 Enter pass/fail in result on Test Log 4.3.3.21.12 Fail indicator is off 4.3.3.21.12.1 Enter pass/fail in result on Test Log 4.3.3.21.13 Fail relay is energized 4.3.3.21.13.1 Enter pass/fail in result on Test Log 4.3.3.21.14 Range indicator is off 4.3.3.21.14.1 Enter pass/fail in result on Test Log 4.3.3.21.15 Bargraph is amber 4.3.3.21.15.1 Enter pass/fail in result on Test Log 4.3.3.21.16 Bargraph has 9 segments lit 4.3.3.21.16.1 Enter pass/fail in result on Test Log 4.3.3.21.17 Backlight is on mR/h 4.3.3.21.17.1 Enter pass/fail in result on Test Log 4.3.3.21.18 Radiation value displayed on front panel is 19.9 mR/h 4.3.3.21.18.1 Enter pass/fail in result on Test Log 4.3.3.21.19 Analog output I (4-2OmA) is 14.55 ma 4.3.3.21.19.1 Enter pass/fail in result on Test Log 4.3.3.21.20 Analog output 2 (4-2OmA) is 14.55 ma 4.3.3.21.20.1 Enter pass/fail in result on Test Log 4.323.21.21----Ahalog-outpItJ3(0-10OVdc) is-6.6 v 4.3.3.21.21.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 1o 3/02 PROCEDURE, 9405603 ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE REV 1 3076 PRODUCTION I Yjv'( 81 of 246 1 PLN

4.3.3.21.22 Set signal generator frequency to 15 Hz 4.3.3.21.23 Within one minute 4.3.3.21.23.1 Check source indicator is off 4.3.3.21.23.1.1 Enter pass/fail in result on Test Log 4.3.3.21.23.2 HIGH alarm indicator is off 4.3.3.21.23.2.1 Enter pass/fail in result on Test Log 4.3.3.21.23.3 HIGH alarm relay is energized 4.3.3.21.23.3.1 Enter pass/fail in result on Test Log 4.3.3.21.23.4 Auxiliary output is energized 4.3.3.21.23.4.1 Enter pass/fail in result on Test Log 4.3.3.21.23.5 WARN alarm indicator is off 4.3.3.21.23.5.1 Enter pass/fail in result on Test Log 4.3.3.21.23.6 WARN alarm relay is energized 4.3.3.21.23.6.1 Enter pass/fail in result on Test Log 4.3.3.21.23.7 Fail indicator is off 4.3.3.21.23.7.1 Enter pass/fail in result on Test Log 4.3.3.21.23.8 Fail relay is energized 4.3.3.21.23.8.1 Enter pass/fail in result on Test Log 4.3.3.21.23.9 Range indicator is off 4.3.3.21.23.9.1 Enter pass/fail in result on Test Log 4.3.3.21.23.10 Bargraph is green .

4.3.3.21.23.10.1 Enter pass/fail in result on Test Log 4.3.3.21.23.11 Bargraph has 6 segments lit 4.3.3.21.23.11.1 Enter pass/fail in result on Test Log 4.3.3.21.23.12 Backlight is on mR/h 4.3.3.21.23.12.1.1 Enter pass/fail in result on Test Log 4.3.3.21.23.13 Radiation value displayed on front panel is .900mR/h 4.3.3.21.23.13.1 Enter pass/fail in result on Test Log 4.3.3.21.23.14Analog output I (4-20mA) is 10.25 ma 4.3.3.21.23.14.1 Enter pass/fail in result on Test Log 4.3.3.21.23.15 Analog output 2 (4-2OmA) is 10.25 ma 4.3.3.21.23.15.1 Enter pass/fail in result on Test Log 4.3.3.21.23.16Analog output 3 (0-1OVdc) is 3.91 v 4.3.3.21.23.16.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT - PROCEDURE, 9405603 DOC CTRL SHEET NO. SE]

REV ECN NO. RELEASED FOR PLN 3076 ij PRODUCTION ,g?%W' 82 of 246 94095603VTP P

4.3.3.22 Test 22: HIGH Alarm Condition 12 Normal -> High -> Warn -> Normal-> Acknb6Wdge 4.3.3.22.1 Set signal generator frequency to 1.68 kHz 4.3.3.22.2 Within one minute:

4.3.3.22.2.1 Check source indicator is off 4.3.3.22.2.1.1 Enter pass/fail in result on Test Log 4.3.3.22.2.2 HIGH alarm indicator is flashing 4.3.3.22.2.2.1 Enter pass/fail in result on Test Log 4.3.3.22.2.3 HIGH alarm relay is de-energized 4.3.3.22.2.3.1 Enter pass/fail in result on Test Log 4.3.3.22.2.4 Auxiliary output is de-energized 4.3.3.22.2.4.1 Enter pass/fail in result on Test Log 4.3.3.22.2.5 WARN alarm indicator is flashing 4.3.3.22.2.5.1 Enter pass/fail in result on Test Log 4.3.3.22.2.6 WARN alarm relay is de-energized 4.3.3.22.2.6.1 Enter pass/fail in result on Test Log 4.3.3.22.2.7 Fail indicator is off 4.3.3.22.2.7.1 Enter pass/fail in result on Test Log 4.3.3.22.2.8 Fail relay is energized 4.3.3.22.2.8.1 Enter pass/fail in result on Test Log 4.3.3.22.2.9 Range indicator is off 4.3.3.22.2.9.1 Enter pass/fail in result on Test Log 4.3.3.22.2.10 Bargraph is red 4.3.3.22.2.10.1 Enter pass/fail in result on Test Log 4.3.3.22.2.11 Bargraph has 12 segments lit 4.3.3.22.2.11.1 Enter pass/fail in result on Test Log 4.3.3.22.2.12 Backlight is on R/h 4.3.3.22.2.12.1.1 Enter pass/fail in result on Test Log 4.3.3.22.2.13 Radiation value displayed on front panel is .101 R/h 4.3.3.22.2.13.1 Enter pass/fail in result on Test Log 4.3.3.22.2.14 Analog output I (4-2OmA) is 16.81 ma 43.3.22.2.14.1-- Enter pass/fail in result on Test Log 4.3.3.22.2.15 Analog output 2 (4-20mA) is 16.81 ma 4.3.3.22.2.15.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION ,iE'(f 83 of 246 PLN

4.3.3.22.2.16 Analog output 3 (0-1OVdc) is 8.01 v 4.3.3.22.2.16.1 Enter pass/fail in result on Test Log 4.3.3.22.3 Set signal generator frequency to 331 Hz 4.3.3.22.4 Within one minute 4.3.3.22.4.1 Check source indicator is off 4.3.3.22.4.1.1 Enter pass/fail in result on Test Log 4.3.3.22.4.2 HIGH alarm indicator is flashing 4.3.3.22.4.2.1 Enter pass/fail in result on Test Log 4.3.3.22.4.3 HIGH alarm relay is de-energized 4.3.3.22.4.3.1 Enter pass/fail in result on Test Log 4.3.3.22.4.4 Auxiliary output is de-energized 4.3.3.22.4.4.1 Enter pass/fail in result on Test Log 4.3.3.22.4.5 WARN alarm indicator is flashing 4.3.3.22.4.5.1 Enter pass/fail in result on Test Log 4.3.3.22.4.6 WARN alarm relay is de-energized 4.3.3.22.4.6.1 Enter pass/fail in result on Test Log 4.3.3.22.4.7 Fail indicator is off 4.3.3.22.4.7.1 Enter pass/fail in result on Test Log 4.3.3.22.4.8 Fail relay is energized 4.3.3.22.4.8.1 Enter pass/fail in result on Test Log 4.3.3.22.4.9 Range indicator is off 4.3.3.22.4.9.1 Enter pass/fail in result on Test Log 4.3.3.22.4.10 Bargraph is red 4.3.3.22.4.10.1 Enter pass/fail in result on Test Log 4.3.3.22.4.11 Bargraph has 9 segments lit 4.3.3.22.4.11.1 Enter pass/fail in result on Test Log 4.3.3.22.4.12 Backlight is on mR/h 4.3.3.22.4.12.1 Enter pass/fail in result on Test Log 4.3.3.22.4.13 Radiation value displayed on front panel is 19.9 mR/h 4.3.3.22.4.13.1 Enter pass/fail in result on Test Log

.. 4.3-.322_4.14-Anlo-goutput-1(4-2OmA) is 14.55 ma

- 4.3.3.22A_4141 -Eiiter pass/fail in-result on Test Log 4.3.3.22.4.15 Analog output 2 (4-2OmA) is 14.55 ma 4.3.3.22.4.15.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT I PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION ,?,'%' 84 of 246 PLN

4.3.3.22.4.16 Analog output 3 (0-10Vdc) is 6.6 v 4.3.3.22.4.16.1 Enter pass/fail in result on Test Log 4.3.3.22.5 Set signal generator frequency to 15 Hz 4.3.3.22.6 Within one minute 4.3.3.22.6.1 Check source indicator is off 4.3.3.22.6.1.1 Enter pass/fail in result on Test Log 4.3.3.22.6.2 HIGH alarm indicator is flashing 4.3.3.22.6.2.1 Enter pass/fail in result on Test Log 4.3.3.22.6.3 HIGH alarm relay is de-energized 4.3.3.22.6.3.1 Enter pass/fail in result on Test Log 4.3.3.22.6.4 Auxiliary output is de-energized 4.3.3.22.6.4.1 Enter pass/fail in result on Test Log 4.3.3.22.6.5 WARN alarm indicator is flashing 4.3.3.22.6.5.1 Enter pass/fail in result on Test Log 4.3.3.22.6.6 WARN alarm relay is de-energized 4.3.3.22.6.6.1 Enter pass/fail in result on Test Log 4.3.3.22.6.7 Fail indicator is off 4.3.3.22.6.7.1 Enter pass/fail in result on Test Log 4.3.3.22.6.8 Fail relay is energized 4.3.3.22.6.8.1 Enter pass/fail in result on Test Log

-4.3.3.22.6.9 -Range indicator is off 4.3.3.22.6.9.1 Enter pass/fail in result on Test Log 4.3.3.22.6.10 Bargraph is red 4.3.3.22.6.10.1 Enter pass/fail in result on Test Log 4.3.3.22.6.11 Bargraph has 6 segments lit 4.3.3.22.6.11.1 Enter pass/fail in result on Test Log 4.3.3.22.6.12 Backlight is on mR/h 4.3.3.22.6.12.1.1 Enter pass/fail in result on Test Log 4.3.3.22.6.13 Radiation value displayed on front panel is .900 mR/h 4.3.3.22.6.13.1 Enter pass/fail in result on Test Log 4.3.3.22.6.14 Analog output 1 (4-20mA) is 10.25 ma

-4.3.3.22.6.14.1-Enter-pass/fail in-result on Test Log 4.3.3.22.6.15 Analog output 2 (4-20mA) is 10.25 ma 4.3.3.22.6.15.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RoA 1ON MANAGEMENT 1o2o2 PROCEDURE, 9405603 REV ECN NO. ,ELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION ,1Y,( 85 of 246 1 PLN

4.3.3.22.6.16 Analog output 3 (0-1OVdc) is 3.91 v 4.3.3.22.6.16.1 Enter pass/fail in result on Test Log 4.3.3.22.7 Press ALARM ACKNOWLEDGE pushbutton 4.3.3.22.8 Check source indicator is off 4.3.3.22.8.1 Enter pass/fail in result on Test Log 4.3.3.22.9 HIGH alarm indicator is off 4.3.3.22.9.1 Enter pass/fail in result on Test Log 4.3.3.22.10 HIGH alarm relay is energized 4.3.3.22.10.1 Enter pass/fail in result on Test Log 4.3.3.22.11 Auxiliary output is energized 4.3.3.22.11.1 Enter pass/fail in result on Test Log 4.3.3.22.12 WARN alarm indicator is off 4.3.3.22.12.1 Enter pass/fail in result on Test Log 4.3.3.22.13 WARN alarm relay is energized 4.3.3.22.13.1 Enter pass/fail in result on Test Log 4.3.3.22.14 Fail indicator is off 4.3.3.22.14.1 Enter pass/fail in result on Test Log 4.3.3.22.15 Fail relay is energized 4.3.3.22.15.1 Enter pass/fail in result on Test Log 4.3.3.22.16 Range indicator is off 4.3.3.22.16.1 Enter pass/fail in result on Test Log 4.3.3.22.17 Bargraph is green 4.3.3.22.17.1 Enter pass/fail in result on Test Log 4.3.3.22.18 Bargraph has 6 segments lit 4.3.3.22.18.1 Enter pass/fail in result on Test Log 4.3.3.22.19 Backlight is on mR/h 4.3.3.22.19.1 Enter pass/fail in result on Test Log 4.3.3.22.20 Radiation value displayed on front panel is .900 mR/h 4.3.3.22.20.1 Enter pass/fail in result on Test Log 4.3.3.22.21 Analog output I (4-2OmA) is 10.25 ma

- 4.3.322.21.1 Enter pass/fail in -result on Test Log 4.3.3.22.22 Analog output 2 (4-2OmA) is 10.25 ma 4.3.3.22.22.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 10123/02 - PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION 9',(f 86 of 246 1JPLN

4.3.3.22.23 Analog output 3 (0-1OVdc) is 3.91 v 4.3.3.22.23.1 Enter pass/fail in result on Test Log 4.3.3.23 Test 23: Under Range Alarm Condition 4.3.3.23.1 Set the signal generator frequency equal to 166 mHz 4.3.3.23.2 Within one minute:

4.3.3.23.2.1 Check source indicator is off 4.3.3.23.2.1.1 Enter pass/fail in result on Test Log 4.3.3.23.2.2 HIGH alarm indicator is off 4.3.3.23.2.2.1 Enter pass/fail in result on Test Log 4.3.3.23.2.3 HIGH alarm relay is energized 4.3.3.23.2.3.1 Enter pass/fail in result on Test Log 4.3.3.23.2.4 Auxiliary output is energized 4.3.3.23.2.4.1 Enter pass/fail in result on Test Log 4.3.3.23.2.5 WARN alarm indicator is off 4.3.3.23.2.5.1 Enter pass/fail in result on Test Log 4.3.3.23.2.6 WARN alarm relay is energized 4.3.3.23.2.6.1 Enter pass/fail in result on Test Log 4.3.3.23.2.7 Fail indicator is off 4.3.3.23.2.7.1 Enter pass/fail in result on Test Log 4.3.3.23.2.8 Fail relay is energized

- --.4.3.3.23.2.8:1-Enter-pass/fail in result on Test Log 4.3.3.23.2.9 Range indicator is on red 4.3.3.23.2.9.1 Enter pass/fail in result on Test Log 4.3.3.23.2.10 Bargraph is off 4.3.3.23.2.10.1 Enter pass/fail in result on Test Log 4.3.3.23.2.11 Bargraph has no segments lit 4.3.3.23.2.11.1 Enter pass/fail in result on Test Log 4.3.3.23.2.12 Backlight is on mR/h 4.3.3.23.2.12.1.1 Enter pass/fail in result on Test Log 4.3.3.23.2.13 Radiation value displayed on front panel is 0.00 4.3.3.23.2.13.1 Enter pass/fail in result on Test Log 4.3.3.23.2.14 Analog output I (4-20mA) is 4.0 ma 4.3.3.23.2.14.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 1 3lo2 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION I,*4( 87 of 246 1JPLN

4.3.3.23.2.15 Analog output 2 (4-2OmA) ii 4.0 ma 4.3.3.23.2.15.1 Enter pass/fail in result on Test Log 4.3.3.23.2.16 Analog output 3 (0-10Vdc) is 0.00v 4.3.3.23.2.16.1 Enter pass/fail in result on Test Log 4.3.3.23.3 Set the signal generator frequency to 15 Hz 4.3.3.23.4 Within one minute:

4.3.3.23.4.1 Check source indicator is off 4.3.3.23.4.1.1 Enter pass/fail in result on Test Log 4.3.3.23.4.2 HIGH alarm indicator is off 4.3.3.23.4.2.1 Enter pass/fail in result on Test Log 4.3.3.23.4.3 HIGH alarm relay is energized 4.3.3.23.4.3.1 Enter pass/fail in result on Test Log 4.3.3.23.4.4 Auxiliary output is energized 4.3.3.23.4.4.1 Enter pass/fail in result on Test Log 4.3.3.23.4.5 WARN alarm indicator is off 4.3.3.23.4.5.1 Enter pass/fail in result on Test Log 4.3.3.23.4.6 WARN alarm relay is energized 4.3.3.23.4.6.1 Enter pass/fail in result on Test Log 4.3.3.23.4.7 Fail indicator is off 4.3.3.23.4.7.1 Enter pass/fail in result on Test Log 4.3.3.23.4.8 Fail relay is energized 4.3.3.23.4.8.1 Enter pass/fail in result on Test Log 4.3.3.23.4.9 Range indicator is off 4.3.3.23.4.9.1 Enter pass/fail in result on Test Log 4.3.3.23.4.10 Bargraph is green 4.3.3.23.4.10.1 Enter pass/fail in result on Test Log 4.3.3.23.4.11 Bargraph has 6 segments lit 4.3.3.23.4.11.1 Enter pass/fail in result on Test Log 4.3.3.23.4.12 Backlight is on mR/h 4.3.3.23.4.12.1.1 Enter pass/fail in result on Test Log 4.3.3.23.4.13 Radiation value displayed on front panel is .900 mR/h 4.3.3.23.4.13.1 Enter pass/fail in result on Test Log 4.3.3.23.4.14 Analog output 1 (4-20mA) is 10.25 ma 4.3.3.23.4.14.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 10/23102 -PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION 6*&%[(( 88 of 246 PILN

4.3.3.23.4.15 Analog output 2 (4-20mA) is i0.25 ma 4.3.3.23.4.15.1 Enter pass/fail in result on Test Log 4.3.3.23.4.16 Analog output 3 (0-1OVdc) is 3.91 v

,4.3.3.23.4.16.1 Enter pass/fail in result on Test Log 4.3.3.23.5 With the signal generator at 15.0 Hz, Change the Underrange set point to 1.OOEO 4.3.3.23.5.1 Enter pass/fail in result on Test Log 4.3.3.23.6 Within one minute:

4.3.3.23.6.1 Check source indicator is off 4.3.3.23.6.1.1 Enter pass/fail in result on Test Log 4.3.3.23.6.2 HIGH alarm indicator is off 4.3.3.23.6.2.1 Enter pass/fail in result on Test Log 4.3.3.23.6.3 HIGH alarm relay is energized 4.3.3.23.6.3.1 Enter pass/fail in result on Test Log 4.3.3.23.6.4 Auxiliary output is energized 4.3.3.23.6.4.1 Enter pass/fail in result on Test Log 4.3.3.23.6.5 WARN alarm indicator is off 4.3.3.23.6.5.1 Enter pass/fail in result on Test Log 4.3.3.23.6.6 WARN alarm relay is energized 4.3.3.23.6.6.1 Enter pass/fail in result on Test Log 4.3.3.23.6.7 Fail iRWi5tfosd6ff 4.3.3.23.6.7.1 Enter pass/fail in result on Test Log 4.3.3.23.6.8 Fail relay is energized 4.3.3.23.6.8.1 Enter pass/fail in result on Test Log 4.3.3.23.6.9 Range indicator is on red 4.3.3.23.6.9.1 Enter pass/fail in result on Test Log 4.3.3.23.6.10 Bargraph is on, green 4.3.3.23.6.10.1 Enter pass/fail in result on Test Log 4.3.3.23.6.11 Bargraph has 6 segments lit 4.3.3.23.6.11.1 Enter pass/fail in result on Test Log 4.3.3.23.6.12 Backlight is on mRPh 4.3.3.23.6.12.1.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT- --0d23 -- PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO SIZE 1 3076 PRODUCTION IOZ& 89 of 246 PLN

4.3.3.23.6.13 Radiation value displayed on front panel is 0.00 4.3.3.23.6.13.1 Enter pass/fail in result on Test Log 4.3.3.23.6.14 Analog output 1 (4-2OmA) is 4.0 ma 4.3.3.23.6.14.1 Enter pass/fail in result on Test Log 4.3.3.23.6.15 Analog output 2 (4-2OmA) is 4.0 ma 4.3.3.23.6.15.1 Enter pass/fail in result on Test Log 4.3.3.23.6.16 Analog output 3 (0-1OVdc) is 0.00v 4.3.3.23.6.16.1 Enter pass/fail in result on Test Log 4.3.3.23.7 Return Underrange set point to 1.00-2 4.3.3.23.8 Within one minute:

4.3.3.23.8.1 Check source indicator is off 4.3.3.23.8.1.1 Enter pass/fail in result on Test Log 4.3.3.23.8.2 HIGH alarm indicator is off 4.3.3.23.8.2.1 Enter pass/fail in result on Test Log 4.3.3.23.8.3 HIGH alarm relay is energized 4.3.3.23.8.3.1 Enter pass/fail in result on Test Log 4.3.3.23.8.4 Auxiliary output is energized 4.3.3.23.8.4.1 Enter pass/fail in result on Test Log 4.3.3.23.8.5 WARN alarm indicator is off 4.3.3.23.8.5.1 Enter pass/fail in result on Test Log 4.3.3.23.8.6 WARN alarm relay is energized 4.3.3.23.8.6.1 Enter pass/fail in result on Test Log 4.3.3.23.8.7 Fail indicator is off 4.3.3.23.8.7.1 Enter pass/fail in result on Test Log 4.3.3.23.8.8 Fail relay is energized 4.3.3.23.8.8.1 Enter pass/fail in result on Test Log 4.3.3.23.8.9 Range indicator is off 4.3.3.23.8.9.1 Enter pass/fail in result on Test Log 4.3.3.23.8.10 Bargraph is green 4.3.3.23.8.10.1 Enter pass/fail in result on Test Log 4.3.3.23.8.11 Bargraph has 6 segments lit 4.3.3.23.8.11.1 Enter pass/fail in result on Test Log

-4.3.3.23.8.12 Backlight is-onmR/h 4.3.3.23.8.12.1.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT I PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO.,FSE .

1 3076 PRODUCTION I JMf'1 90 of 246 PLN

4.3.3.23.8.13 Radiation value displayed on fr6ht panel is .900 mR/h 4.3.3.23.8.13.1 Enter pass/fail in result on Test Log 4.3.3.23.8.14 Analog output 1 (4-20mA) is 10.25 ma 4.3.3.23.8.14.1 Enter pass/fail in result on Test Log 4.3.3.23.8.15 Analog output 2 (4-20mA) is 10.25 ma 4.3.3.23.8.15.1 Enter pass/fail in result on Test Log 4.3.3.23.8.16 Analog output 3 (0-1OVdc) is 3.91 v 4.3.3.23.8.16.1 Enter pass/fail in result on Test Log 4.3.3.24 Test 24: Over Range Alarm Condition 1 Normal -> Over Range -> Acknowledge -> Normal 4.3.3.24.1 Set the signal generator frequency equal to 16.7 kHz 4.3.3.24.2 Within one minute:

4.3.3.24.2.1 Check source indicator is off 4.3.3.24.2.1.1 Enter pass/fail in result on Test Log 4.3.3.24.2.2 HIGH alarm indicator is flashing 4.3.3.24.2.2.1 Enter pass/fail in result on Test Log 4.3.3.24.2.3 HIGH alarm relay is de-energized 4.3.3.24.2.3.1 Enter pass/fail in result on Test Log 4.3.3.24.2.4 Auxiliary output is de-energized 4.3.3.24.2.4.1 Enter pass/fail in result on Test Log 4.3.3.24.2.5 WARN alarm indicator is flashing 4.3.3.24.2.5.1 Enter pass/fail in result on Test Log 4.3.3.24.2.6 WARN alarm relay is de-energized 4.3.3.24.2.6.1 Enter pass/fail in result on Test Log 4.3.3.24.2.7 Fail indicator is off 4.3.3.24.2.7.1 Enter pass/fail in result on Test Log 4.3.3.24.2.8 Fail relay is energized 4.3.3.24.2.8.1 Enter pass/fail in result on Test Log 4.3.3.24.2.9 Range indicator is on red 4.3.3.24.2.9.1 Enter pass/fail in result on Test Log 4.3.3.24.2.10 Bargraph is red 4.3.3.24.2.10.1 Enter pass/fail in result on Test Log 4.3.3.24.2.11 Bargraph has all segments lit 4.3.3.24.2.11.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNcOR RADIATION MANAGEMENT -PROCEDURE,-9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION ,.,' 91 of 246 1JPLN

4.3.3.24.2.12 Backlight is off 4.3.3.24.2.12.1.1 Enter pass/fail in result on Test Log 4.3.3.24.2.13 Radiation value displayed on front panel is EEEEE 4.3.3.24.2.13.1 Enter pass/fail in result on Test Log 4.3.3.24.2.14 Analog output 1 (4-2OmA) is 20.0 ma 4.3.3.24.2.14.1 Enter pass/fail in result on Test Log 4.3.3.24.2.15 Analog output 2 (4-20mA) is 20.0 ma 4.3.3.24.2.15.1 Enter pass/fail in result on Test Log 4.3.3.24.2.16 Analog output 3 (0-1OVdc) is 10.0 v 4.3.3.24.2.16.1 Enter pass/fail in result on Test Log 4.3.3.24.3 Press ALARM ACKNOWLEDGE pushbutton 4.3.3.24.4 Check source indicator is off 4.3.3.24.4.1 Enter pass/fail in result on Test Log 4.3.3.24.5 HIGH alarm indicator is on steady 4.3.3.24.5.1 Enter pass/fail in result on Test Log 4.3.3.24.6 HIGH alarm relay is de-energized 4.3.3.24.6.1 Enter pass/fail in result on Test Log 4.3.3.24.7 Auxiliary output is de-energized 4.3.3.24.7.1 Enter pass/fail in result on Test Log 4.3.3.24.8 WARN alarm indicator is on steady 4.3.3.24.8.1 -- Enter pas-slfaiin-result-on--est Log 4.3.3.24.9 WARN alarm relay is de-energized 4.3.3.24.9.1 Enter pass/fail in result on Test Log 4.3.3.24.10 Fail indicator is off 4.3.3.24.10.1 Enter pass/fail in result on Test Log 4.3.3.24.11 Fail relay is energized 4.3.3.24.11.1 Enter pass/fail in result on Test Log 4.3.3.24.12 Range indicator is on red 4.3.3.24.12.1 Enter pass/fail in result on Test Log 4.3.3.24.13 Bargraph is red 4.3.3.24.13.1 Enter pass/fail in result on Test Log 4.3.3.24.14 -Bargiraph has all segments lit 4.3.3.24.14.1 Enter pass/fail in result on Test Log DATE TrTLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 10123102 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION gbZ1f 92 of 246 PLN

4.3.3.24.15 Backlight is off 4.3.3.24.15.1 Enter pass/fail in result on Test Log 4.3.3.24.16 Radiation value displayed on front panel is EEEEE 4.3.3.24.16.1 Enter pass/fail in result on Test Log 4.3.3.24.17 Analog output 1 (4-2OmA) is 20.0 ma 4.3.3.24.17.1 Enter pass/fail in result on Test Log 4.3.3.24.18 Analog output 2 (4-20mA) is 20.0 ma 4.3.3.24.18.1 Enter pass/fail in result on Test Log 4.3.3.24.19 Analog output 3 (0-10Vdc) is 10.0 v 4.3.3.24.19.1 Enter pass/fail in result on Test Log 4.3.3.24.20 Set the signal generator frequency to 15 Hz 4.3.3.24.21 Press ACKNOWLEDGE pushbutton to clear Overrange 4.3.3.24.22 Within one minute:

4.3.3.24.22.1 Check source indicator is off 4.3.3.24.22.1.1 Enter pass/fail in result on Test Log 4.3.3.24.22.2 HIGH alarm indicator is off 4.3.3.24.22.2.1 Enter pass/fail in result on Test Log 4.3.3.24.22.3 HIGH alarm relay is energized 4.3.3.24.22.3.1 Enter pass/fail in result on Test Log 4.3.3.24.22.4 Auxiliary output is energized 4.3.3.24.22.4.1 Enter pass/fail in result on Test Log 4.3.3.24.22.5 WARN alarm indicator is off 4.3.3.24.22.5.1 Enter pass/fail in result on Test Log 4.3.3.24.22.6 WARN alarm relay is energized 4.3.3.24.22.6.1 Enter pass/fail in result on Test Log 4.3.3.24.22.7 Fail indicator is off 4.3.3.24.22.7.1 Enter pass/fail in result on Test Log 4.3.3.24.22.8 Fail relay is energized 4.3.3.24.22.8.1 Enter pass/fail in result on Test Log 4.3.3.24.22.9 Range indicator is off 4.3.3.24.22.9.1 Enter pass/fail in result on Test Log 4.3.3.24.22.10 Bargraph is green 4.3.3.24.22.10.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT Io o2 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO SIZE 1 3076 PRODUCTION *"/'4( 93 of 246PL 94095603VTPP

4.3.3.24.22.11 Bargraph has 6 segments lit 4.3.3.24.22.11.1 Enter pass/fail in result on Test Log 4.3.3.24.22.12 Backlight is on mR/h 4.3.3.24.22.12.1.1 Enter pass/fail in result on Test Log 4.3.3.24.22.13 Radiation value displayed on front panel is .900 mR/h 4.3.3.24.22.13.1 Enter pass/fail in result on Test Log 4.3.3.24.22.14 Analog output I (4-2OmA) is 10.25 ma 4.3.3.24.22.14.1 Enter pass/fail in result on Test Log 4.3.3.24.22.15 Analog output 2 (4-2OmA) is 10.25 ma 4.3.3.24.22.15.1 Enter pass/fail in result on Test Log 4.3.3.24.22.16 Analog output 3 (0-10Vdc) is 3.91 v 4.3.3.24.22.16.1 Enter pass/fail in result on Test Log 4.3.3.25 Test 25: Over Range Alarm Condition 2 Normal -> Over Range -> Normal -> Acknowledge 4.3.3.25.1 Set the signal generator frequency equal to 16.7 kHz 4.3.3.25.2 Within one minute:

4.3.3.25.2.1 Check source indicator is off 4.3.3.25.2.1.1 Enter pass/fail in result on Test Log 4.3.3.25.2.2 HIGH alarm indicator is flashing 4.3.3.25.2.2.1 Enter pass/fail in result on Test Log 4.3.3.25.2.3 HIGH alarm relay is de-energized 4.3.3.25.2.3.1 Enter pass/fail in result on Test Log 4.3.3.25.2.4 Auxiliary output is de-energized 4.3.3.25.2.4.1 Enter pass/fail in result on Test Log 4.3.3.25.2.5 WARN alarm indicator is flashing 4.3.3.25.2.5.1 Enter pass/fail in result on Test Log 4.3.3.25.2.6 WARN alarm relay is de-energized 4.3.3.25.2.6.1 Enter pass/fail in result on Test Log 4.3.3.25.2.7 Fail indicator is off 4.3.3.25.2.7.1 Enter pass/fail in result on Test Log 4.3.3.25.2.8 Fail relay is energized

. 4.3.3.25.2.8.1 Enter pass/fail in result on Test Log 4.3.3.25.2.9 Range indicator is on red 4.3.3.25.2.9.1 Enter pass/fail in result on Test Log DATE A 10/23/02NTITLE SOFTWARE VALIDATION TEST SYNCOR IATIONM AGEMENT PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION ,*%Y(( 94 of 246 PLN

4.3.3.25.2.i0 Bargraph is on red 4.3.3.25.2.10.1 Enter pass/fail in result on Test Log 4.3.3.25.2.11 Bargraph has all segments lit 4.3.3.25.2.11.1 Enter pass/fail in result on Test Log 4.3.3.25.2.12 Backlight is off 4.3.3.25.2.12.1.1 Enter pass/fail in result on Test Log 4.3.3.25.2.13 Radiation value displayed on front panel is EEEEE 4.3.3.25.2.13.1 Enter pass/fail in result on Test Log 4.3.3.25.2.14 Analog output I (4-2OmA) is 20.0 ma 4.3.3.25.2.14.1 Enter pass/fail in result on Test Log 4.3.3.25.2.15 Analog output 2 (4-2OmA) is 20.0 ma 4.3.3.25.2.15.1 Enter pass/fail in result on Test Log 4.3.3.25.2.16 Analog output 3 (0-1OVdc) is 10.0 v 4.3.3.25.2.16.1 Enter pass/fail in result on Test Log 4.3.3.25.3 Set the signal generator frequency to 15 Hz 4.3.3.25.4 Within one minute:

4.3.3.25.4.1 Check source indicator is off 4.3.3.25.4.1.1 Enter pass/fail in result on Test Log 4.3.3.25.4.2 HIGH alarm indicator is flashing

.4.3.3.25.4.21 -Enter-pass/fail in.result on Test Log 4.3.3.25.4.3 HIGH alarm relay is de-energized 4.3.3.25.4.3.1 Enter pass/fail in result on Test Log 4.3.3.25.4.4 Auxiliary output is de-energized 4.3.3.25.4.4.1 Enter pass/fail in result on Test Log 4.3.3.25.4.5 WARN alarm indicator is flashing 4.3.3.25.4.5.1 Enter pass/fail in result on Test Log 4.3.3.25.4.6 WARN alarm relay is de-energized 4.3.3.25.4.6.1 Enter pass/fail in result on Test Log 4.3.3.25.4.7 Fail indicator is off 4.3.3.25.4.7.1 Enter pass/fail in result on Test Log 4.3.3.25.4.8 Fail relay is energized 4.3.3.25.4.8.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT l32PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. S1.E 1 3076 PRODUCTION ýIW(t 95 of 246 PLN

4.3.3.25.4.9 Range indicator is on red 4.3.3.25.4.9.1 Enter pass/fail in result 6h Test Log 4.3.3.25.4.10 Bargraph is red 4.3.3.25.4.10.1 Enter pass/fail in result on Test Log 4.3.3.25.4.11 Bargraph all segments lit 4.3.3.25.4.11.1 Enter pass/fail in result on Test Log 4.3.3.25.4.12 Backlight is off 4.3.3.25.4.12.1.1 Enter pass/fail in result on Test Log 4.3.3.25.4.13 Radiation value displayed on front panel is EEEEE 4.3.3.25.4.13.1 Enter pass/fail in result on Test Log 4.3.3.25.4.14 Analog output I (4-2OmA) is 20.0 ma 4.3.3.25.4.14.1 Enter pass/fail in result on Test Log 4.3.3.25.4.15 Analog output 2 (4-2OmA) is 20.0 ma 4.3.3.25.4.15.1 Enter pass/fail in result on Test Log 4.3.3.25.4.16 Analog output 3 (0-1OVdc) is 10.0 v 4.3.3.25.4.16.1 Enter pass/fail in result on Test Log 4.3.3.25.5 Press ALARM ACKNOWLEDGE pushbutton to acknowledge alarms 4.3.3.25.6 After approximately 2 seconds, Press ALARM ACKNOWLEDGE pushbutton again to overrange 4.3.3.25.7 Check source indicator is off 4.3.3.25.7.1 Enter pass/fail in result on Test Log 4.3.3.25.8 HIGH alarm indicator is off 4.3.3.25.8.1 Enter pass/fail in result on Test Log 4.3.3.25.9 HIGH alarm relay is energized 4.3.3.25.9.1 Enter pass/fail in result on Test Log 4.3.3.25.10 Auxiliary output is energized 4.3.3.25.10.1 Enter pass/fail in result on Test Log 4.3.3.25.11 WARN alarm indicator is off 4.3.3.25.11.1 Enter pass/fail in result on Test Log 4.3.3.25.12 WARN alarm relay is energized 4.3.3.25.12.1 Enter pass/fail in result on Test Log 4.3.3.25.13 - Fail indicator is off 4.3.3.25.13.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNcOR RADIATION MANAGEMENT 10/23/02 -- PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION f*%Y' 96 of 246 PLN

4.3.3.25.14 Fail relay is energized 4.3.3.25.14.1 Enter pass/fail in result on Test Log 4.3.3.25.15 Range indicator is off 4.3.3.25.15.1 Enter pass/fail in result on Test Log 4.3.3.25.16 Bargraph is green 4.3.3.25.16.1 Enter pass/fail in result on Test Log 4.3.3.25.17 Bargraph has 6 segments lit 4.3.3.25.17.1 Enter pass/fail in result on Test Log 4.3.3.25.18 Backlight is on mR/h 4.3.3.25.18.1 Enter pass/fail in result on Test Log 4.3.3.25.19 Radiation value displayed on front panel is .900 mR/h 4.3.3.25.19.1 Enter pass/fail in result on Test Log 4.3.3.25.20 Analog output I (4-2OmA) is 10.25 ma 4.3.3.25.20.1 Enter pass/fail in result on Test Log 4.3.3.25.21 Analog output 2 (4-20mA) is 10.25 ma 4.3.3.25.21.1 Enter pass/fail in result on Test Log 4.3.3.25.22 Analog output 3 (0-1OVdc) is 3.91 v 4.3.3.25.22.1 Enter pass/fail in result on Test Log 4.3.3.26 Test 26: Over Range -Alarm Condition -3 Normal -> Over Range -> High -> Acknowledge-> Normal 4.3.3.26.1 Set the signal generator frequency equal to 16.7 kHz 4.3.3.26.2 Within one minute:

4.3.3.26.2.1 Check source indicator is off 4.3.3.26.2.1.1 Enter pass/fail in result on Test Log 4.3.3.26.2.2 HIGH alarm indicator is flashing 4.3.3.26.2.2.1 Enter pass/fail in result on Test Log 4.3.3.26.2.3 HIGH alarm relay is de-energized 4.3.3.26.2.3.1 Enter pass/fail in result on Test Log 4.3.3.26.2.4 Auxiliary output is de-energized 4.3.3.26.2.4.1 Enter pass/fail in result on Test Log

--4.3.3.26.2.5 WARN alarm indicator is flashing 4.3.3.26.2.5.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT I o2 --- PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION J.Yf 97 of 2469 PLN

4.3.3.26.2.6 WARN alarm relay is de-eneigiied 4.3.3.26.2.6.1 Enter pass/fail in result on Test Log 4.3.3.26.2.7 Fail indicator is off 4.3.3.26.2.7.1 Enter pass/fail in result on Test Log 4.3.3.26.2.8 Fail relay is energized 4.3.3.26.2.8.1 Enter pass/fail in result on Test Log 4.3.3.26.2.9 Range indicator is on red 4.3.3.26.2.9.1 Enter pass/fail in result on Test Log 4.3.3.26.2.10 Bargraph is on red 4.3.3.26.2.10.1 Enter pass/fail in result on Test Log 4.3.3.26.2.11 Bargraph has all segments lit 4.3.3.26.2.11.1 Enter pass/fail in result on Test Log 4.3.3.26.2.12 Backlight is off 4.3.3.26.2.12.1.1 Enter pass/fail in result on Test Log 4.3.3.26.2.13 Radiation value displayed on front panel is EEEEE 4.3.3.26.2.13.1 Enter pass/fail in result on Test Log 4.3.3.26.2.14 Analog output I (4-20mA) is 20.0 ma 4.3.3.26.2.14.1 Enter pass/fail in result on Test Log 4.3.3.26.2.15 Analog output 2 (4-2OmA) is 20.0 ma 4.3.3.26.2.15.1 Enter pass/fail in result on Test Log 4.3.3.26.2.16 Analog output 3 (0-1OVdc) is 10.0 v 4.3.3.26.2.16.1 Enter pass/fail in result on Test Log 4.3.3.26.3 Set signal generator frequency to 1.68 kHz 4.3.3.26.4 Within one minute:

4.3.3.26.4.1 Check source indicator is off 4.3.3.26.4.1.1 Enter pass/fail in result on Test Log 4.3.3.26.4.2 HIGH alarm indicator is flashing 4.3.3.26.4.2.1 Enter pass/fail in result on Test Log 4.3.3.26.4.3 HIGH alarm relay is de-energized 4.3.3.26.4.3.1 Enter pass/fail in result on Test Log 4.3.3.26.4.4 Auxiliary output is de-energized 4.3.3.26.4.4.1 Enter pass/fail in result on Test Log 4.3.3.26.4.5 WARN alarm indicator is flashing 4.3.3.26.4.5.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 13o2PROCEDURE9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SZE 1 3076 PRODUCTION 4?1.,M'1 98 of 246 PLN

4.3.3.26.4.6 WARN alarm relay is de-ene'gized 4.3.3.26.4.6.1 Enter pass/fail in result on Test Log 4.3.3.26.4.7 Fail indicator is off 4.3.3.26.4.7.1 Enter pass/fail in result on Test Log 4.3.3.26.4.8 Fail relay is energized 4.3.3.26.4.8.1 Enter pass/fail in result on Test Log 4.3.3.26.4.9 Range indicator is on red 4.3.3.26.4.9.1 Enter pass/fail in result on Test Log 4.3.3.26.4.10 Bargraph is on red 4.3.3.26.4.10.1 Enter pass/fail in result on Test Log 4.3.3.26.4.11 Bargraph has all segments lit 4.3.3.26.4.11.1 Enter pass/fail in result on Test Log 4.3.3.26.4.12 Backlight is off 4.3.3.26.4.12.1.1 Enter pass/fail in result on Test Log 4.3.3.26.4.13 Radiation value displayed on front panel is EEEEE 4.3.3.26.4.13.1 Enter pass/fail in result on Test Log 4.3.3.26.4.14 Analog output 1 (4-2OmA) is 20.0 ma 4.3.3.26.4.14.1 Enter pass/fail in result on Test Log 4.3.3.26.4.15 Analog output 2 (4-2OmA) is 20.0 ma

-3.-26.415A1 ___ Enter pass/fail in result on Test Log 4.3.3.26.4.16 Analog output 3 (0-10Vdc) is 10.0 v 4.3.3.26.4.16.1 Enter pass/fail in result on Test Log 4.3.3.26.5 Press ALARM ACKNOWLEDGE pushbutton 4.3.3.26.6 Check source indicator is off 4.3.3.26.6.1 Enter pass/fail in result on Test Log 4.3.3.26.7 HIGH alarm indicator is on steady 4.3.3.26.7.1 Enter pass/fail in result on Test Log 4.3.3.26.8 HIGH alarm relay is de-energized 4.3.3.26.8.1 Enter pass/fail in result on Test Log 4.3.3.26.9 Auxiliary output is de-energized

-4.3.3.26.9.1-Enter pass/fail in result on Test Log 4.3.3.26.10 WARN alarm indicator is on steady 4.3.3.26.10.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT I PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. TSE 1 3076 PRODUCTION .4ak'- 99 of 246 PLN

4.3.3.26.11 WARN alarm relay is de-energized 4.3.3.26.11.1 Enter pass/fail in result on Test Log 4.3.3.26.12 Fail indicator is off 4.3.3.26.12.1 Enter pass/fail in result on Test Log 4.3.3.26.13 Fail relay is energized 4.3.3.26.13.1 Enter pass/fail in result on Test Log 4.3.3.26.14 Range indicator is on red 4.3.3.26.14.1 Enter pass/fail in result on Test Log 4.3.3.26.15 Bargraph is on red 4.3.3.26.15.1 Enter pass/fail in result on Test Log 4.3.3.26.16 Bargraph has all segments lit 4.3.3.26.16.1 Enter pass/fail in result on Test Log 4.3.3.26.17 Backlight is off 4.3.3.26.17.1 Enter pass/fail in result on Test Log 4.3.3.26.18 Radiation value displayed on front panel is EEEEE 4.3.3.26.18.1 Enter pass/fail in result on Test Log 4.3.3.26.19 Analog output 1 (4-20mA) is 20.0 ma 4.3.3.26.19.1 Enter pass/fail in result on Test Log 4.3.3.26.20 Analog output 2 (4-20mA) is 20.0 ma 4.3.3.26.20.1 Enter pass/fail in result on Test Log 4.3.3.26.21 Analog output 3 (0-1OVdc) is 10.0 v 4.3.3.26.21.1 Enter pass/fail in result on Test Log 4.3.3.26.22 Set the signal generator frequency to 15 4.3.3.26.23 Press ACKNOWLEDGE pushbutton to clear overrange 4.3.3.26.24 Within one minute:

4.3.3.26.24.1 Check source indicator is off 4.3.3.26.24.1.1 Enter pass/fail in result on Test Log 4.3.3.26.24.2 HIGH alarm indicator is off 4.3.3.26.24.2.1 Enter pass/fail in result on Test Log 4.3.3.26.24.3 HIGH alarm relay is energized 4.3.3.26.24.3X1- Enter pass/fail in result on Test Log 4.3.3.26.24.4 Auxiliary output is energized 4.3.3.26.24.4.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNcOR RADIATION MANAGEMENT 10/23/02 - PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION ,oazff 100 of 246 PLN

4.3.3.26.24.5 WARN alarm indicator is off 4.3.3.26.24.5.1 Enter pass/fail in result on Test Log 4.3.3.26.24.6 WARN alarm relay is energized 4.3.3.26.24.6.1 Enter pass/fail in result on Test Log 4.3.3.26.24.7 Fail indicator is off 4.3.3.26.24.7.1 Enter pass/fail in result on Test Log 4.3.3.26.24.8 Fail relay is energized 4.3.3.26.24.8.1 Enter pass/fail in result on Test Log 4.3.3.26.24.9 Range indicator is off 4.3.3.26.24.9.1 Enter pass/fail in result on Test Log 4.3.3.26.24.10 Bargraph is green 4.3.3.26.24.10.1 Enter pass/fail in result on Test Log 4.3.3.26.24.11 Bargraph has 6 segments lit 4.3.3.26.24.11.1 Enter pass/fail in result on Test Log 4.3.3.26.24.12 Backlight is on mR/h 4.3.3.26.24.12.1 Enter pass/fail in result on Test Log 4.3.3.26.24.13 Radiation value displayed on front panel is .900 mR/h 4.3.3.26.24.13.1 Enter pass/fail in result on Test Log 4.3.3.26.24.14Analog output 1 (4-20mA) is 10.25 ma 4.3.3.26.24.14.1 Enter pass/fail in result on Test Log 4.3.3.26.24.15 Analog output 2 (4-20mA) is 10.25 ma 4.3.3.26.24.15.1 Enter pass/fail in result on Test Log 4.3.3.26.24.16 Analog output 3 (0-1OVdc) is 3.91 v 4.3.3.26.24.16.1 Enter pass/fail in result on Test Log 4.3.3.27 Test 27: Over Range Alarm Condition 4 Normal -> Over Range -> High -> Normal -> Acknowledge 4.3.3.27.1 Set the signal generator frequency equal to 16.7 kHz 4.3.3.27.2 Within one minute:

4.3.3.27.2.1 Check source indicator is off 4.3.3.27.2.1.1 Enter pass/fail in result on Test Log

-4.3.3.27.2.2 -IGHIiarmi-idicdtor is flashing 4.3.3.27.2.2.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT o2 -PROCEDURE, 9405603

-o REV ECN NO. RELEASED FOR DOC CTRL SHEET No. TSZE 1 3076 PRODUCTION ,-'YfW 101 of 246 PLN

4.3.3.27.2.3 HIGH alarm relay is de-energiied 4.3.3.27.2.3.1 Enter pass/fail in result on Test Log 4.3.3.27.2.4 Auxiliary output is de-energized 4.3.3.27.2.4.1 Enter pass/fail in result on Test Log 4.3.3.27.2.5 WARN alarm indicator is flashing 4.3.3.27.2.5.1 Enter pass/fail in result on Test Log 4.3.3.27.2.6 WARN alarm relay is de-energized 4.3.3.27.2.6.1 Enter pass/fail in result on Test Log 4.3.3.27.2.7 Fail indicator is off 4.3.3.27.2.7.1 Enter pass/fail in result on Test Log 4.3.3.27.2.8 Fail relay is energized 4.3.3.27.2.8.1 Enter pass/fail in result on Test Log 4.3.3.27.2.9 Range indicator is on red 4.3.3.27.2.9.1 Enter pass/fail in result on Test Log 4.3.3.27.2.10 Bargraph is on red 4.3.3.27.2.10.1 Enter pass/fail in result on Test Log 4.3.3.27.2.11 Bargraph has all segments lit 4.3.3.27.2.11.1 Enter pass/fail in result on Test Log 4.3.3.27.2.12 Backlight is off 4.3.3.27.2.12.1.1 Enter pass/fail in result on Test Log 4.3.3.27.2.13 Radiation value displayed on front panel is EEEEE 4.3.3.27.2.13.1 Enter pass/fail in result on Test Log 4.3.3.27.2.14 Analog output 1 (4-2OmA) is 20.0 ma 4.3.3.27.2.14.1 Enter pass/fail in result on Test Log 4.3.3.27.2.15 Analog output 2 (4-2OmA) is 20.0 ma 4.3.3.27.2.15.1 Enter pass/fail in result on Test Log 4.3.3.27.2.16 Analog output 3 (0-10Vdc) is 10.0 v 4.3.3.27.2.16.1 Enter pass/fail in result on Test Log 4.3.3.27.3 Set signal generator frequency to 1.68 kHz 4.3.3.27.4 Within one minute:

4.3.3.27.4.1 Check source indicator is off 4.3.3.27.4.1.1 Enter pass/fail in result on Test Log 4.3.3.27.4.2 HIGH alarm indicator is flashing 4.3.3.27.4.2.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST

-SYNcORRADIATION MANAGEMENT C PROCEDURE, 9405603 REV ECN NO. RELEASED FOR D0C CTRL SHEET NO. TSIZE 1 3076 PRODUCTION 94%&. 1 102 of 246 PLN

4.3.3.27.4.3 HIGH alarm relay is de-energized 4.3.3.27.4.3.1 Enter pass/fail in result on Test Log 4.3.3.27.4.4 Auxiliary output is de-energized 4.3.3.27.4.4.1 Enter pass/fail in result on Test Log 4.3.3.27.4.5 WARN alarm indicator is flashing 4.3.3.27.4.5.1 Enter pass/fail in result on Test Log 4.3.3.27.4.6 WARN alarm relay is de-energized 4.3.3.27.4.6.1 Enter pass/fail in result on Test Log 4.3.3.27.4.7 Fail indicator is off 4.3.3.27.4.7.1 Enter pass/fail in result on Test Log 4.3.3.27.4.8 Fail relay is energized 4.3.3.27.4.8.1 Enter pass/fail in result on Test Log 4.3.3.27.4.9 Range indicator is on red 4.3.3.27.4.9.1 Enter pass/fail in result on Test Log 4.3.3.27.4.10 Bargraph is red 4.3.3.27.4.10.1 Enter pass/fail in result on Test Log 4.3.3.27.4.11 Bargraph has all segments lit 4.3.3.27.4.11.1 Enter pass/fail in result on Test Log 4.3.3.27.4.12 Backlight is off 4.3.3.27.4.12.1.1 Enter pass/fail in result on Test Log 4.3.3.27.4.13 Radiation value displayed on front panel is EEEEE 4.3.3.27.4.13.1 Enter pass/fail in result on Test Log 4.3.3.27.4.14 Analog output I (4-20mA) is 20.0 ma 4.3.3.27.4.14.1 Enter pass/fail in result on Test Log 4.3.3.27.4.15 Analog output 2 (4-20mA) is 20.0 ma 4.3.3.27.4.15.1 Enter pass/fail in result on Test Log 4.3.3.27.4.16 Analog output 3 (0-1OVdc) is 10.0 v 4.3.3.27.4.16.1 Enter pass/fail in result on Test Log 4.3.3.27.5 Set the signal generator frequency to 15 Hz 4.3.3.27.6 Within one minute:

4.3.3.27.6.1 -Che-ck source indicator is off 4.3.3.27.6.1.1 'Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 1 PROCEDURE 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION

103 of 246 PL N

4.3.3.27.6.2 HIGH alarm indicator is flashing 4.3.3.27.6.2.1 Enter pass/fail in result on Test Log 4.3.3.27.6.3 HIGH alarm relay is de-energized 4.3.3.27.6.3.1 Enter pass/fail in result on Test Log 4.3.3.27.6.4 Auxiliary output is de-energized 4.3.3.27.6.4.1 Enter pass/fail in result on Test Log 4.3.3.27.6.5 WARN alarm indicator is flashing 4.3.3.27.6.5.1 Enter pass/fail in result on Test Log 4.3.3.27.6.6 WARN alarm relay is de-energized 4.3.3.27.6.6.1 Enter pass/fail in result on Test Log 4.3.3.27.6.7 Fail indicator is off 4.3.3.27.6.7.1 Enter pass/fail in result on Test Log 4.3.3.27.6.8 Fail relay is energized 4.3.3.27.6.8.1 Enter pass/fail in result on Test Log 4.3.3.27.6.9 Range indicator is on red 4.3.3.27.6.9.1 Enter pass/fail in result on Test Log 4.3.3.27.6.10 Bargraph is red 4.3.3.27.6.10.1 Enter pass/fail in result on Test Log 4.3.3.27.6.11 Bargraph all segments lit 4.3.3.27.6.11.1 Enter pass/fail in result on Test Log 4.3.3.27.6.12 Backlight is off 4.3.3.27.6.12.1.1 Enter pass/fail in result on Test Log 4.3.3.27.6.13 Radiation value displayed on front panel is EEEEE 4.3.3.27.6.13.1 Enter pass/fail in result on Test Log 4.3.3.27.6.14 Analog output 1 (4-2OmA) is 20.0 ma 4.3.3.27.6.14.1 Enter pass/fail in result on Test Log 4.3.3.27.6.15 Analog output 2 (4-20mA) is 20.0 ma 4.3.3.27.6.15.1 Enter pass/fail in result on Test Log 4.3.3.27.6.16 Analog output 3 (0-10Vdc) is 10.0 v 4.3.3.27.6.16.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT - PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION 1 0Z11 104 of 246 1 PLN

4.3.3.27.7 Press ALARM ACKNOWLEDGE pushbutton to acknowledge alarms 4.3.3.27.8 After approximately 2 seconds, Press ALARM ACKNOWLEDGE pushbutton again to clear overrange 4.3.3.27.9 Check source indicator is off 4.3.3.27.9.1 Enter pass/fail in result on Test Log 4.3.3.27.10 HIGH alarm indicator is off 4.3.3.27.10.1 Enter pass/fail in result on Test Log 4.3.3.27.11 HIGH alarm relay is energized 4.3.3.27.11.1 Enter pass/fail in result on Test Log 4.3.3.27.12 Auxiliary output is energized 4.3.3.27.12.1 Enter pass/fail in result on Test Log 4.3.3.27.13 WARN alarm indicator is off 4.3.3.27.13.1 Enter pass/fail in result on Test Log 4.3.3.27.14 WARN alarm relay is energized 4.3.3.27.14.1 Enter pass/fail in result on Test Log 4.3.3.27.15 Fail indicator is off 4.3.3.27.15.1 Enter pass/fail in result on Test Log 4.3.3.27.16 Fail relay is energized 4.3.3.27.16.1 Enter pass/fail in result on Test Log 4.3.3.27.17 Range indicator is off 4.3.3.27.17.1 Enter passlfailin-re-sultron Test Log 4.3.3.27.18 Bargraph is green 4.3.3.27.18.1 Enter pass/fail in result on Test Log 4.3.3.27.19 Bargraph has 6 segments lit 4.3.3.27.19.1 Enter pass/fail in result on Test Log 4.3.3.27.20 Backlight is on mR/h 4.3.3.27.20.1 Enter pass/fail in result on Test Log 4.3.3.27.21 Radiation value displayed on front panel is .900 mR/h 4.3.3.27.21.1 Enter pass/fail in result on Test Log 4.3.3.27.22 Analog output I (4-2OmA) is 10.25 ma 4.3.3.27.22.1 Enter pass/fail in result on Test Log 4.3.3.27.23 Analog output 2 (4-20mA) is 10.25 ma 4.3.3.27.23.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT o PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION ' 105 of 246 PLN

4.3.3.27.24 Analog output 3 (0-1OVdc) is 3.91 V 4.3.3.27.24.1 Enter pass/fail in result on Test Log 4.3.3.28 Test 28: Over Range Alarm Condition 5 Normal -> Over Range -> High -> Warn -> Acknowledge -> Normal 4.3.3.28.1 Set the signal generator frequency equal to 16.7 kHz 4.3.3.28.2 Within one minute:

4.3.3.28.2.1 Check source indicator is off 4.3.3.28.2.1.1 Enter pass/fail in result on Test Log 4.3.3.28.2.2 HIGH alarm indicator is flashing 4.3.3.28.2.2.1 Enter pass/fail in result on Test Log 4.3.3.28.2.3 HIGH alarm relay is de-energized 4.3.3.28.2.3.1 Enter pass/fail in result on Test Log 4.3.3.28.2.4 Auxiliary output is de-energized 4.3.3.28.2.4.1 Enter pass/fail in result on Test Log 4.3.3.28.2.5 WARN alarm indicator is flashing 4.3.3.28.2.5.1 Enter pass/fail in result on Test Log 4.3.3.28.2.6 WARN alarm relay is de-energized 4.3.3.28.2.6.1 Enter pass/fail in result on Test Log 4.3.3.28.2.7 Fail indicator is off 4.3.3.28.2.7.1 Enter pass/fail in result on Test Log 4.3.3.28.2.8 Fail relay is energized 4.3.3.28.2.8.1 Enter pass/fail in result on Test Log 4.3.3.28.2.9 Range indicator is on red 4.3.3.28.2.9.1 Enter pass/fail in result on Test Log 4.3.3.28.2.10 Bargraph is on red 4.3.3.28.2.10.1 Enter pass/fail in result on Test Log 4.3.3.28.2.11 Bargraph has all segments lit 4.3.3.28.2.11.1 Enter pass/fail in result on Test Log 4.3.3.28.2.12 Backlight is off 4.3.3.28.2.12.1.1 Enter pass/fail in result on Test Log 4.3.3.28.2.13 Radiation value displayed on front panel is EEEEE 4.3.3.28.2.13.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION .,& 106 of 246 PLN

4.3.3.28.2.14 Analog output I (4-2OmA) is 20.0 ma 4.3.3.28.2.14.1 Enter pass/fail in result on Test Log 4.3.3.28.2.15 Analog output 2 (4-2OmA) is 20.0 ma 4.3.3.28.2.15.1 Enter pass/fail in result on Test Log 4.3.3.28.2.16 Analog output 3 (0-10Vdc) is 10.0 ma 4.3.3.28.2.16.1 Enter pass/fail in result on Test Log 4.3.3.28.3 Set signal generator frequency to 1.68 kHz 4.3.3.28.4 Within one minute:

4.3.3.28.4.1 Check source indicator is off 4.3.3.28.4.1.1 Enter pass/fail in result on Test Log 4.3.3.28.4.2 HIGH alarm indicator is flashing 4.3.3.28.4.2.1 Enter pass/fail in result on Test Log 4.3.3.28.4.3 HIGH alarm relay is de-energized 4.3.3.28.4.3.1 Enter pass/fail in result on Test Log 4.3.3.28.4.4 Auxiliary output is de-energized 4.3.3.28.4.4.1 Enter pass/fail in result on Test Log 4.3.3.28.4.5 WARN alarm indicator is flashing 4.3.3.28.4.5.1 Enter pass/fail in result on Test Log 4.3.3.28.4.6 WARN alarm relay is de-energized

"- 4.3.3.28.4.6:1 -Enter-pass/fail in result on Test Log 4.3.3.28.4.7 Fail indicator is off 4.3.3.28.4.7.1 Enter pass/fail in result on Test Log 4.3.3.28.4.8 Fail relay is energized 4.3.3.28.4.8.1 Enter pass/fail in result on Test Log 4.3.3.28.4.9 Range indicator is on red 4.3.3.28.4.9.1 Enter pass/fail in result on Test Log 4.3.3.28.4.10 Bargraph is red 4.3.3.28.4.10.1 Enter pass/fail in result on Test Log 4.3.3.28.4.11 Bargraph has all segments lit 4.3.3.28.4.11.1 Enter pass/fail in result on Test Log

- 4.3.3.28.4.12 Backlight is off 4.3.3.28.4.12.1.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT PROCEDURE, 9405603

-o2o2 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SE 1 3076 PRODUCTION a£-b( 107 of 246 PLN

4.3.3.28.4.13 Radiation value displayed oh front panel is EEEEE 4.3.3.28.4.13.1 Enter pass/fail in result on Test Log 4.3.3.28.4.14 Analog output 1 (4-20mA) is 20.0 ma 4.3.3.28.4.14.1 Enter pass/fail in result on Test Log 4.3.3.28.4.15 Analog output 2 (4-2OmA) is 20.0 ma 4.3.3.28.4.15.1 Enter pass/fail in result on Test Log 4.3.3.28.4.16 Analog output 3 (0-1OVdc) is 10.0 v 4.3.3.28.4.16.1 Enter pass/fail in result on Test Log 4.3.3.28.5 Set signal generator frequency to 331 Hz 4.3.3.28.6 Within one minute 4.3.3.28.6.1 Check source indicator is off 4.3.3.28.6.1.1 Enter pass/fail in result on Test Log 4.3.3.28.6.2 HIGH alarm indicator is flashing 4.3.3.28.6.2.1 Enter pass/fail in result on Test Log 4.3.3.28.6.3 HIGH alarm relay is de-energized 4.3.3.28.6.3.1 Enter pass/fail in result on Test Log 4.3.3.28.6.4 Auxiliary output is de-energized 4.3.3.28.6.4.1 Enter pass/fail in result on Test Log 4.3.3.28.6.5 WARN alarm indicator is flashing 4.3.3.28.6.5.1 Enter pass/fail in result on Test Log 4.3.3.28.6.6 WARN alarm relay is de-energized 4.3.3.28.6.6.1 Enter pass/fail in result on Test Log 4.3.3.28.6.7 Fail Enter 4.3.3.28.6.7.1 indicator is offin result on Test Log pass/fail 4.3.3.28.6.8 Fail relay is energized 4.3.3.28.6.8.1 Enter pass/fail in result on Test Log 4.3.3.28.6.9 Range indicator is on red 4.3.3.28.6.9.1 Enter pass/fail in result on Test Log 4.3.3.28.6.10 Bargraph is red 4.3.3.28.6.10.1 Enter pass/fail in result on Test Log 4.3.3.28.6.11 -Bargraph-has all segments lit 4.3.3.28.6.11.1 Enter pass/fail in result on Test Log 4.3.3.28.6.12 Backlight is off 4.3.3.28.6.12.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 1023/02 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION 94-IM 108 of 246 22 6 0 VJ 3 PLN

4.3.3.28.6.13 Radiation value displayed on front panel is EEEEE 4.3.3.28.6.13.1 Enter pass/fail in result on Test Log 4.3.3.28.6.14 Analog output I (4-20mA) is 20.0 ma 4.3.3.28.6.14.1 Enter pass/fail in result on Test Log 4.3.3.28.6.15 Analog output 2 (4-2OmA) is 20.0 ma 4.3.3.28.6.15.1 Enter pass/fail in result on Test Log 4.3.3.28.6.16 Analog output 3 (0-1OVdc) is 10.0 v 4.3.3.28.6.16.1 Enter pass/fail in result on Test Log 4.3.3.28.7 Press ALARM ACKNOWLEDGE pushbutton to acknowledge alarms 4.3.3.28.8 After approximately 2 seconds, Press ALARM ACKNOWLEDGE pushbutton again to clear overrange 4.3.3.28.9 Check source indicator is off 4.3.3.28.9.1 Enter pass/fail in result on Test Log 4.3.3.28.10 HIGH alarm indicator is off 4.3.3.28.10.1 Enter pass/fail in result on Test Log 4.3.3.28.11 HIGH alarm relay is energized 4.3.3.28.11.1 Enter pass/fail in result on Test Log 4.3.3.28.12 Auxiliary output is energized 4.3.3.28.12.1 Enter pass/fail in result on Test Log 4.3.3.28.13 WARN alarm indicator is on, flashing 4.3.3.28.13.1 Enter pass/fail in result on Test Log 4.3.3.28.14 WARN alarm relay is de-energized 4.3.3.28.14.1 Enter pass/fail in result on Test Log 4.3.3.28.15 Fail indicator is off 4.3.3.28.15.1 Enter pass/fail in result on Test Log 4.3.3.28.16 Fail relay is energized 4.3.3.28.16.1 Enter pass/fail in result on Test Log 4.3.3.28.17 Range indicator is off 4.3.3.28.17.1 Enter pass/fail in result on Test Log 4.3.3.28.18 Bargraph is amber 4.3;3.28.18.1 -Enter pass/fail in result on Test Log 4.3.3.28.19 Bargraph has 9 segments lit 4.3.3.28.19.1 Enter pass/fail in result on Test Log DATE T[TLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT PROCEDURE-9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET iSZ.E NO.

1 3076 PRODUCTION ,'4 109 of 246 PL N

4.3.3.28.20 Backlight is on mR/h 4.3.3.28.20.1 Enter pass/fail in result on Test Log 4.3.3.28.21 Radiation value displayed on front panel is 19.9 mR/h 4.3.3.28.21.1 Enter pass/fail in result on Test Log 4.3.3.28.22 Analog output I (4-2OmA) is 14.55 ma 4.3.3.28.22.1 Enter pass/fail in result on Test Log 4.3.3.28.23 Analog output 2 (4-20mA) is 14.55 ma 4.3.3.28.23.1 Enter pass/fail in result on Test Log 4.3.3.28.24 Analog output 3 (0-1OVdc) is 6.6 v 4.3.3.28.24.1 Enter pass/fail in result on Test Log 4.3.3.28.25 Set the signal generator frequency to 15 Hz 4.3.3.28.26 Press the ACKNOWLEDGE pushbutton 4.3.3.28.27 Within one minute:

4.3.3.28.27.1 Check source indicator is off 4.3.3.28.27.1.1 Enter pass/fail in result on Test Log 4.3.3.28.27.2 HIGH alarm indicator is off 4.3.3.28.27.2.1 Enter pass/fail in result on Test Log 4.3.3.28.27.3 HIGH alarm relay is energized 4.3.3.28.27.3.1 Enter pass/fail in result on Test Log 4.3.3.28.27.4 Auxiliary output is energized 4.3.3.28.27.4.1 Enter pass/fail in result on Test Log 4.3.3.28.27.5 WARN alarm indicator is off 4.3.3.28.27.5.1 Enter pass/fail in result on Test Log 4.3.3.28.27.6 WARN alarm relay is energized 4.3.3.28.27.6.1 Enter pass/fail in result on Test Log 4.3.3.28.27.7 Fail indicator is off 4.3.3.28.27.7.1 Enter pass/fail in result on Test Log 4.3.3.28.27.8 Fail relay is energized 4.3.3.28.27.8.1 Enter pass/fail in result on Test Log 4.3.3.28.27.9 Range indicator is off

... 43.3.28;27.9.---Enter pass/fail in result on Test Log 4.3.3.28.27.10 Bargraph is green 4.3.3.28.27.10.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION .i,%(1110 of 246 PLN

4.3.3.28.27.11 Bargraph has 6 segments lit 4.3.3.28.27.11.1 Enter pass/fail in result on Test Log 4.3.3.28.27.12 Backlight is on mR/h 4.3.3.28.27.12.1.1 Enter pass/fail in result on Test Log 4.3.3.28.27.13 Radiation value displayed on front panel is .900 mR/h 4.3.3.28.27.13.1 Enter pass/fail in result on Test Log 4.3.3.28.27.14 Analog output I (4-20mA) is 10.25 ma 4.3.3.28.27.14.1 Enter pass/fail in result on Test Log 4.3.3.28.27.15 Analog output 2 (4-2OmA) is 10.25 ma 4.3.3.28.27.15.1 Enter pass/fail in result on Test Log 4.3.3.28.27.16 Analog output 3 (0-1OVdc) is 3.91 v 4.3.3.28.27.16.1 Enter pass/fail in result on Test Log 4.3.3.29 Test 29: Over Range Alarm Condition 6 Normal -> Over Range -> High -> Warn -> Normal -> Acknowledge 4.3.3.29.1 Set the signal generator frequency equal to 16.7 kHz 4.3.3.29.2 Within one minute:

4.3.3.29.2.1 Check source indicator is off 4.3.3.29.2.1.1 Enter pass/fail in result on Test Log 4.3.3.29.2.2 HIGH alarm indicator is flashing 4.3.3.29.2.2.1 Enter pass/fail in result on Test Log 4.3.3.29.2.3 HIGH alarm relay is de-energized 4.3.3.29.2.3.1 Enter pass/fail in result on Test Log 4.3.3.29.2.4 Auxiliary output is de-energized 4.3.3.29.2.4.1 Enter pass/fail in result on Test Log 4.3.3.29.2.5 WARN alarm indicator is flashing 4.3.3.29.2.5.1 Enter pass/fail in result on Test Log 4.3.3.29.2.6 WARN alarm relay is de-energized 4.3.3.29.2.6.1 Enter pass/fail in result on Test Log 4.3.3.29.2.7 Fail indicator is off 4.3;3;29.27.1 Enter pass/fail in result on Test Log 4.3.3.29.2.8 Fail relay is energized 4.3.3.29.2.8.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION Cf'aY'f- 111 of 246 PLN

4.3.3.29.2.9 Range indicator is on red 4.3.3.29.2.9.1 Enter pass/fail in result on Test Log 4.3.3.29.2.10 Bargraph is on red 4.3.3.29.2.10.1 Enter pass/fail in result on Test Log 4.3.3.29.2.11 Bargraph has all segments lit 4.3.3.29.2.11.1 Enter pass/fail in result on Test Log 4.3.3.29.2.12 Backlight is off 4.3.3.29.2.12.1.1 Enter pass/fail in result on Test Log 4.3.3.29.2.13 Radiation value displayed on front panel is EEEEE 4.3.3.29.2.13.1 Enter pass/fail in result on Test Log 4.3.3.29.2.14 Analog output 1 (4-20mA) is 20.0 ma 4.3.3.29.2.14.1 Enter pass/fail in result on Test Log 4.3.3.29.2.15 Analog output 2 (4-20mA) is 20.0 ma 4.3.3.29.2.15.1 Enter pass/fail in result on Test Log 4.3.3.29.2.16 Analog output 3 (0-10Vdc) is 10.0 v 4.3.3.29.2.16.1 Enter pass/fail in result on Test Log 4.3.3.29.3 Set signal generator frequency to 1.68 kHz 4.3.3.29.4 Within one minute:

4.3.3.29.4.1 Check source indicator is off S-:-4.3.3.29.41 A*Enter-pass/fail inresult on Test Log 4.3.3.29.4.2 HIGH alarm indicator is flashing 4.3.3.29.4.2.1 Enter pass/fail in result on Test Log 4.3.3.29.4.3 HIGH alarm relay is de-energized 4.3.3.29.4.3.1 Enter pass/fail in result on Test Log 4.3.3.29.4.4 Auxiliary output is de-energized 4.3.3.29.4.4.1 Enter pass/fail in result on Test Log 4.3.3.29.4.5 WARN alarm indicator is flashing 4.3.3.29.4.5.1 Enter pass/fail in result on Test Log 4.3.3.29.4.6 WARN alarm relay is de-energized 4.3.3.29.4.6.1 Enter pass/fail in result on Test Log 4.3.3.29.4.7 Fail indicator is off 4.3.3.29.4.7.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATiON MANAGEMENT 1-3/2PROCEDURE;9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. TSZE 1 3076 PRODUCTION .Y'*'(W 112 of 246 PLN

4.3.3.29.4.8 Fail relay is energized 4.3.3.29.4.8.1 Enter pass/fail in result on Test Log 4.3.3.29.4.9 Range indicator is on red 4.3.3.29.4.9.1 Enter pass/fail in result on Test Log 4.3.3.29.4.10 Bargraph is red 4.3.3.29.4.10.1 Enter pass/fail in result on Test Log 4.3.3.29.4.11 Bargraph has all segments lit 4.3.3.29.4.11.1 Enter pass/fail in result on Test Log 4.3.3.29.4.12 Backlight is off 4.3.3.29.4.12.1.1 Enter pass/fail in result on Test Log 4.3.3.29.4.13 Radiation value displayed on front panel is EEEEE 4.3.3.29.4.13.1 Enter pass/fail in result on Test Log 4.3.3.29.4.14 Analog output 1 (4-20mA) is 20.0 ma 4.3.3.29.4.14.1 Enter pass/fail in result on Test Log 4.3.3.29.4.15 Analog output 2 (4-20mA) is 20.0 ma 4.3.3.29.4.15.1 Enter pass/fail in result on Test Log 4.3.3.29.4.16 Analog output 3 (0-10Vdc) is 10.0 v 4.3.3.29.4.16.1 Enter pass/fail in result on Test Log 4.3.3.29.5 Set signal generator-frequency to 331 Hz 4.3.3.29.6 Within one minute 4.3.3.29.6.1 Check source indicator is off 4.3.3.29.6.1.1 Enter pass/fail in result on Test Log 4.3.3.29.6.2 HIGH alarm indicator is flashing 4.3.3.29.6.2.1 Enter pass/fail in result on Test Log 4.3.3.29.6.3 HIGH alarm relay is de-energized 4.3.3.29.6.3.1 Enter pass/fail in result on Test Log 4.3.3.29.6.4 Auxiliary output is de-energized 4.3.3.29.6.4.1 Enter pass/fail in result on Test Log 4.3.3.29.6.5 WARN alarm indicator is flashing 4.3.3.29.6.5.1 Enter pass/fail in result on Test Log 4.3.3.29.6.6 WARN alarm relay is de-energized 4.3.3.29.6.6.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 123102 PROCEDURE,-9405603 REV ECN NO. RELEASED FOR DOG CTRL SHEET NO. S .E 1 3076 PRODUCTION ,ZY,'( 113 of 246 PLN

4.3.3.29.6.7 Fail indicator is off 4.3.3.29.6.7.1 Enter pass/fail in result on Test Log 4.3.3.29.6.8 Fail relay is energized 4.3.3.29.6.8.1 Enter pass/fail in result on Test Log 4.3.3.29.6.9 Range indicator is on red 4.3.3.29.6.9.1 Enter pass/fail in result on Test Log 4.3.3.29.6.10 Bargraph is red 4.3.3.29.6.10.1 Enter pass/fail in result on Test Log 4.3.3.29.6.11 Bargraph has all segments lit 4.3.3.29.6.11.1 Enter pass/fail in result on Test Log 4.3.3.29.6.12 Backlight is off 4.3.3.29.6.12.1 Enter pass/fail in result on Test Log 4.3.3.29.6.13 Radiation value displayed on front panel is EEEEE 4.3.3.29.6.13.1 Enter pass/fail in result on Test Log 4.3.3.29.6.14 Analog output I (4-20mA) is 20.0 ma 4.3.3.29.6.14.1 Enter pass/fail in result on Test Log 4.3.3.29.6.15 Analog output 2 (4-20mA) is 20.0 ma 4.3.3.29.6.15.1 Enter pass/fail in result on Test Log 4.3.3.29.6.16 Analog output 3 (0-10Vdc) is 10.0 v 4.3.3.29.6.16:.-- Enter-pass/fail in result on Test Log 4.3.3.29.7 Set the signal generator frequency to 15 Hz 4.3.3.29.8 Within one minute:

4.3.3.29.8.1 Check source indicator is off 4.3.3.29.8.1.1 Enter pass/fail in result on Test Log 4.3.3.29.8.2 HIGH alarm indicator is flashing 4.3.3.29.8.2.1 Enter pass/fail in result on Test Log 4.3.3.29.8.3 HIGH alarm relay is de-energized 4.3.3.29.8.3.1 Enter pass/fail in result on Test Log 4.3.3.29.8.4 Auxiliary output is de-energized 4.3.3.29.8.4.1 Enter pass/fail in result on Test Log 4.3.3.29.8.5 WARN alarm indicator is flashing 4.3.3.29.8.5.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNcoR RADIATION MANAGEMENT 101312 -- PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET TSIZE NO.

1 3076 PRODUCTION 9Z-/M( 114 of 246 PLN

4.3.3.29.8.6 WARN alarm relay is de-ene'gized 4.3.3.29.8.6.1 Enter pass/fail in result on Test Log 4.3.3.29.8.7 Fail indicator is off 4.3.3.29.8.7.1 Enter pass/fail in result on Test Log 4.3.3.29.8.8 Fail relay is energized 4.3.3.29.8.8.1 Enter pass/fail in result on Test Log 4.3.3.29.8.9 Range indicator is on red 4.3.3.29.8.9.1 Enter pass/fail in result on Test Log 4.3.3.29.8.10 Bargraph is red 4.3.3.29.8.10.1 Enter pass/fail in result on Test Log 4.3.3.29.8.11 Bargraph all segments lit 4.3.3.29.8.11.1 Enter pass/fail in result on Test Log 4.3.3.29.8.12 Backlight is off 4.3.3.29.8.12.1.1 Enter pass/fail in result on Test Log 4.3.3.29.8.13 Radiation value displayed on front panel is EEEEE 4.3.3.29.8.13.1 Enter pass/fail in result on Test Log 4.3.3.29.8.14 Analog output 1 (4-2OmA) is 20.0 ma 4.3.3.29.8.14.1 Enter pass/fail in result on Test Log 4.3.3.29.8.15 Analog output 2 (4-2OmA) is 20.0 ma

- -4.3:3.29.8:15.1 -- Enter-pass/fail in result on Test Log 4.3.3.29.8.16 Analog output 3 (0-1OVdc) is 10.0 v 4.3.3.29.8.16.1 Enter pass/fail in result on Test Log 4.3.3.29.9 Press ALARM ACKNOWLEDGE pushbutton to acknowledge alarms 4.3.3.29.10 After approximately 2 seconds, Press ALARM ACKNOWLEDGE pushbutton again to clear overrange 4.3.3.29.11 Check source indicator is off 4.3.3.29.11.1 Enter pass/fail in result on Test Log 4.3.3.29.12 HIGH alarm indicator is off 4.3.3.29.12.1 Enter pass/fail in result on Test Log 4.3.3.29.13 HIGH alarm relay is energized 4.3.3.29.13.1 Enter pass/fail in result on Test Log 4.3.3.29.14 Auxiliary output is energized 4.3.3.29.14.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR-RADiAT1ONMAAGEMJENT PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SE 1 3076 PRODUCTION L.W 1 115 of 246 94095603VTP PLN

4.3.3.29.15 WARN alarm indicator is off 4.3.3.29.15.1 Enter pass/fail in result on Test Log 4.3.3.29.16 WARN alarm relay is energized 4.3.3.29.16.1 Enter pass/fail in result on Test Log 4.3.3.29.17 Fail indicator is off 4.3.3.29.17.1 Enter pass/fail in result on Test Log 4.3.3.29.18 Fail relay is energized 4.3.3.29.18.1 Enter pass/fail in result on Test Log 4.3.3.29.19 Range indicator is off 4.3.3.29.19.1 Enter pass/fail in result on Test Log 4.3.3.29.20 Bargraph is green 4.3.3.29.20.1 Enter pass/fail in result on Test Log 4.3.3.29.21 Bargraph has 6 segments lit 4.3.3.29.21.1 Enter pass/fail in result on Test Log 4.3.3.29.22 Backlight is on mR/h 4.3.3.29.22.1 Enter pass/fail in result on Test Log 4.3.3.29.23 Radiation value displayed on front panel is .900 4.3.3.29.23.1 Enter pass/fail in result on Test Log 4.3.3.29.24 Analog output I (4-20mA) is 10.25 ma 4.3.3.29.24.1 Enter pass/fail in result on Test Log 4.3.3.29.25 Analog output 2 (4-2OmA) is 10.25 ma 4.3.3.29.25.1 Enter pass/fail in result on Test Log 4.3.3.29.26 Analog output 3 (0-1OVdc) is 3.91 v 4.3.3.29.26.1 Enter pass/fail in result on Test Log 4.3.3.30 Test 30: Over Range Alarm Condition 7 Normal -> Over Range -> Warn -> Acknowledge -> Normal 4.3.3.30.1 Set the signal generator frequency equal to 16.7 kHz 4.3.3.30.2 Within one minute:

4.3.3.30.2.1 Check source indicator is off 4.3.3.30.2.1.1 Enter pass/fail in result on Test Log 4.3.3.30.2.2 HIGH alarm indicator is flashing 4.3.3.30.2.2.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT -_--2-PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO SIZE 1 3076 PRODUCTION ,%,9Z 116 of 246 PLN

4.3.3.30.2.3 HIGH alarm relay is de-energized 4.3.3.30.2.3.1 Enter pass/fail in result on Test Log 4.3.3.30.2.4 Auxiliary output is de-energized 4.3.3.30.2.4.1 Enter pass/fail in result on Test Log 4.3.3.30.2.5 WARN alarm indicator is flashing 4.3.3.30.2.5.1 Enter pass/fail in result on Test Log 4.3.3.30.2.6 WARN alarm relay is de-energized 4.3.3.30.2.6.1 Enter pass/fail in result on Test Log 4.3.3.30.2.7 Fail indicator is off 4.3.3.30.2.7.1 Enter pass/fail in result on Test Log 4.3.3.30.2.8 Fail relay is energized 4.3.3.30.2.8.1 Enter pass/fail in result on Test Log 4.3.3.30.2.9 Range indicator is on red 4.3.3.30.2.9.1 Enter pass/fail in result on Test Log 4.3.3.30.2.10 Bargraphd is on red 4.3.3.30.2.10.1 Enter pass/fail in result on Test Log 4.3.3.30.2.11 Bargraph has all segments lit 4.3.3.30.2.11.1 Enter pass/fail in result on Test Log 4.3.3.30.2.12 Backlight is off 4.3.3.30.2.12.1.1 Enter pass/fail in result on Test Log 4.3.3.30.2.13 Radiation value displayed on front panel is EEEEE 4.3.3.30.2.13.1 Enter pass/fail in result on Test Log 4.3.3.30.2.14 Analog output I (4-20mA) is 20.0 ma 4.3.3.30.2.14.1 Enter pass/fail in result on Test Log 4.3.3.30.2.15 Analog output 2 (4-2OmA) is 20.0 ma 4.3.3.30.2.15.1 Enter pass/fail in result on Test Log 4.3.3.30.2.16 Analog output 3 (0-1OVdc) is 10.0 v 4.3.3.30.2.16.1 Enter pass/fail in result on Test Log 4.3.3.30.3 Set signal generator frequency to 331 Hz 4.3.3.30.4 Within one minute 4.3.3:30.4.1- -Ch-eck-source indicator is off 4.3.3.30.4.1.1 Enter pass/fail in result on Test Log 4.3.3.30.4.2 HIGH alarm indicator is flashing 4.3.3.30.4.2.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATIONMANAGEMENT 10123/02 -PROCEDURE,.9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION 1 94(. 117 of 246 PLN

4.3.3.30.4.3 HIGH alarm relay is de-energizbd 4.3.3.30.4.3.1 Enter pass/fail in result on Test Log 4.3.3.30.4.4 Auxiliary output is de-energized 4.3.3.30.4.4.1 Enter pass/fail in result on Test Log 4.3.3.30.4.5 WARN alarm indicator is flashing 4.3.3.30.4.5.1 Enter pass/fail in result on Test Log 4.3.3.30.4.6 WARN alarm relay is de-energized 4.3.3.30.4.6.1 Enter pass/fail in result on Test Log 4.3.3.30.4.7 Fail indicator is off 4.3.3.30.4.7.1 Enter pass/fail in result on Test Log 4.3.3.30.4.8 Fail relay is energized 4.3.3.30.4.8.1 Enter pass/fail in result on Test Log 4.3.3.30.4.9 Range indicator is on red 4.3.3.30.4.9.1 Enter pass/fail in result on Test Log 4.3.3.30.4.10 Bargraph is red 4.3.3.30.4.10.1 Enter pass/fail in result on Test Log 4.3.3.30.4.11 Bargraph has all segments lit 4.3.3.30.4.11.1 Enter pass/fail in result on Test Log 4.3.3.30.4.12 Backlight is off 4.3.3.30.4.12.1 Enter pass/fail in result on Test Log 4.3.3.30.4.13 Radiation value displayed on front panel is EEEEE 4.3.3.30.4.13.1 Enter pass/fail in result on Test Log 4.3.3.30.4.14 Analog output I (4-20mA) is 20.0 ma 4.3.3.30.4.14.1 Enter pass/fail in result on Test Log 4.3.3.30.4.15 Analog output 2 (4-2OmA) is 20.0 ma 4.3.3.30.4.15.1 Enter pass/fail in result on Test Log 4.3.3.30.4.16 Analog output 3 (0-10Vdc) is 10.0 v 4.3.3.30.4.16.1 Enter pass/fail in result on Test Log 4.3.3.30.5 Press ALARM ACKNOWLEDGE pushbutton twice to acknowledge alarms-and -clear-overrange 4.3.3.30.6 Check source indicator is off 4.3.3.30.6.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 10123/02 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION , 118 of 246 1*( PLN

4.3.3.30.7 HIGH alarm indicator is off 4.3.3.30.7.1 Enter pass/fail in result on Test Log 4.3.3.30.8 HIGH alarm relay is energized 4.3.3.30.8.1 Enter pass/fail in result on Test Log 4.3.3.30.9 Auxiliary output is energized 4.3.3.30.9.1 Enter pass/fail in result on Test Log 4.3.3.30.10 WARN alarm indicator is on flashing 4.3.3.30.10.1 Enter pass/fail in result on Test Log 4.3.3.30.11 WARN alarm relay is de-energized 4.3.3.30.11.1 Enter pass/fail in result on Test Log 4.3.3.30.12 Fail indicator is off 4.3.3.30.12.1 Enter pass/fail in result on Test Log 4.3.3.30.13 Fail relay is energized 4.3.3.30.13.1 Enter pass/fail in result on Test Log 4.3.3.30.14 Range indicator is off 4.3.3.30.14.1 Enter pass/fail in result on Test Log 4.3.3.30.15 Bargraph is amber 4.3.3.30.15.1 Enter pass/fail in result on Test Log 4.3.3.30.16 Bargraph has 9 segments lit 4.3.3.30.16.1 Enter pass/fail in result on Test Log 4.3.3.30.17 Backlight is on mR/h 4.3.3.30.17.1 Enter pass/fail in result on Test Log 4.3.3.30.18 Radiation value displayed on front panel is 19.9 mR/h 4.3.3.30.18.1 Enter pass/fail in result on Test Log 4.3.3.30.19 Analog output I (4-20mA) is 14.55 ma 4.3.3.30.19.1 Enter pass/fail in result on Test Log 4.3.3.30.20 Analog output 2 (4-2OmA) is 14.55 ma 4.3.3.30.20.1 Enter pass/fail in result on Test Log 4.3.3.30.21 Analog output 3 (0-1OVdc) is 6.6 v 4.3.3.30.21.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 3 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION 61i0,W( 119 of 246 PLN

4.3.3.30.22 Set the signal generator frequency to 15 Hz 4.3.3.30.23 Press ACKNOWLEDGE pushbutton 4.3.3.30.24 Within one minute:

4.3.3.30.24.1 Check source indicator is off 4.3.3.30.24.1.1 Enter pass/fail in result on Test Log 4.3.3.30.24.2 HIGH alarm indicator is off 4.3.3.30.24.2.1 Enter pass/fail in result on Test Log 4.3.3.30.24.3 HIGH alarm relay is energized 4.3.3.30.24.3.1 Enter pass/fail in result on Test Log 4.3.3.30.24.4 Auxiliary output is energized 4.3.3.30.24.4.1 Enter pass/fail in result on Test Log 4.3.3.30.24.5 WARN alarm indicator is off 4.3.3.30.24.5.1 Enter pass/fail in result on Test Log 4.3.3.30.24.6 WARN alarm relay is energized 4.3.3.30.24.6.1 Enter pass/fail in result on Test Log 4.3.3.30.24.7 Fail indicator is off 4.3.3.30.24.7.1 Enter pass/fail in result on Test Log 4.3.3.30.24.8 Fail relay is energized 4.3.3.30.24.8.1 Enter pass/fail in result on Test Log 4.3.3.30.24.9 Range indicator is off 4.3.3.30.24.9.1 Enter pass/fail in result on Test Log 4.3.3.30.24.10 Bargraph is green 4.3.3.30.24.10.1 Enter pass/fail in result on Test Log 4.3.3.30.24.11 Bargraph has 6 segments lit 4.3.3.30.24.11.1 Enter pass/fail in result on Test Log 4.3.3.30.24.12 Backlight is on mR/h 4.3.3.30.24.12.1.1 Enter pass/fail in result on Test Log 4.3.3.30.24.13 Radiation value displayed on front panel is .900 mR/h 4.3.3.30.24.13.1 Enter pass/fail in result on Test Log 4.3.3.30.24.14 Analog output I (4-20mA) is 10.25 ma 4.3.3.30.24.14.1 Enter pass/fail in result on Test Log 4.3.3.30.2415A-n-alg-out-put-2 (4-20mA) is 10.25 ma 4.3.3.30.24.15.1 Enterpass/fail in result on Test Log 4.3.3.30.24.16 Analog output 3 (0-1OVdc) is 3.91 v 4.3.3.30.24.16.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 123/02 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION ,.14 120 of 246 PLN

4.3.3.31 Test 31: Over Range Alarm Condition 8 Normal -> Over Range -> Wam -> Normal -> Acknowledge 4.3.3.31.1 Set the signal generator frequency equal to 16.7 kHz 4.3.3.31.2 Within one minute:

4.3.3.31.2.1 Check source indicator is off 4.3.3.31.2.1.1 Enter pass/fail in result on Test Log 4.3.3.31.2.2 HIGH alarm indicator is flashing 4.3.3.31.2.2.1 Enter pass/fail in result on Test Log 4.3.3.31.2.3 HIGH alarm relay is de-energized 4.3.3.31.2.3.1 Enter pass/fail in result on Test Log 4.3.3.31.2.4 Auxiliary output is de-energized 4.3.3.31.2.4.1 Enter pass/fail in result on Test Log 4.3.3.31.2.5 WARN alarm indicator is flashing 4.3.3.31.2.5.1 Enter pass/fail in result on Test Log 4.3.3.31.2.6 WARN alarm relay is de-energized 4.3.3.31.2.6.1 Enter pass/fail in result on Test Log 4.3.3.31.2.7 Fail indicator is off 4.3.3.31.2.7.1 Enter pass/fail in result on Test Log 4.3.3.31.2.8 -Fail-relay is-energized 4.3.3.31.2.8.1 Enter pass/fail in result on Test Log 4.3.3.31.2.9 Range indicator is on red 4.3.3.31.2.9.1 Enter pass/fail in result on Test Log 4.3.3.31.2.10 Bargraph is red 4.3.3.31.2.10.1 Enter pass/fail in result on Test Log 4.3.3.31.2.11 Bargraph has all segments lit 4.3.3.31.2.11.1 Enter pass/fail in result on Test Log 4.3.3.31.2.12 Backlight is off 4.3.3.31.2.12.1.1 Enter pass/fail in result on Test Log 4.3.3.31.2.13 Radiation value displayed on front panel is EEEEE 4.3.3.31.2.13.1 Enter pass/fail in result on Test Log 4.3.3.31.2.14 Analog output I (4-20mA) is 20.0 ma 4.3.3.31.2.14.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 10/3/2 PROCEDURE,-9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIE 1 3076 PRODUCTION £'if 121 of 246 PLN

4.3.3.31.2.15 Analog output 2 (4-2OmA) is 2O.b ma 4.3.3.31.2.15.1 Enter pass/fail in result on Test Log 4.3.3.31.2.16 Analog output 3 (0-10Vdc) is 10.0 v 4.3.3.31.2.16.1 Enter pass/fail in result on Test Log 4.3.3.31.3 Set signal generator frequency to 331 Hz 4.3.3.31.4 Within one minute 4.3.3.31.4.1 Check source indicator is off 4.3.3.31.4.1.1 Enter pass/fail in result on Test Log 4.3.3.31.4.2 HIGH alarm indicator is flashing 4.3.3.31.4.2.1 Enter pass/fail in result on Test Log 4.3.3.31.4.3 HIGH alarm relay is de-energized 4.3.3.31.4.3.1 Enter pass/fail in result on Test Log 4.3.3.31.4.4 Auxiliary output is de-energized 4.3.3.31.4.4.1 Enter pass/fail in result on Test Log 4.3.3.31.4.5 WARN alarm indicator is flashing 4.3.3.31.4.5.1 Enter pass/fail in result on Test Log 4.3.3.31.4.6 WARN alarm relay is de-energized 4.3.3.31.4.6.1 Enter pass/fail in result on Test Log 4.3.3.31.4.7 Fail indicator is off 4.3.3.31.4.7.1 Enter pass/fail in result on Test Log 4.3.3.31.4.8 Fail relay is energized 4.3.3.31.4.8.1 Enter pass/fail in result on Test Log 4.3.3.31.4.9 Range indicator is on red 4.3.3.31.4.9.1 Enter pass/fail in result on Test Log 4.3.3.31.4.10 Bargraph is red 4.3.3.31.4.10.1 Enter pass/fail in result on Test Log 4.3.3.31.4.11 Bargraph has all segments lit 4.3.3.31.4.11.1 Enter pass/fail in result on Test Log 4.3.3.31.4.12 Backlight is off 4.3.3.31.4.12.1 Enter pass/fail in result on Test Log 4.3.3.31.4.13 Radiation value displayed on front panel is EEEEE 4.3.3.31.4.13.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT Io3Io2 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION *'i,(( 122 of 246 PLN

4.3.3.31.4.14 Analog output I (4-20mA) is 20.0 ma 4.3.3.31.4.14.1 Enter pass/fail in result on Test Log 4.3.3.31.4.15 Analog output 2 (4-20mA) is 20.0 ma 4.3.3.31.4.15.1 Enter pass/fail in result on Test Log 4.3.3.31.4.16 Analog output 3 (0-10Vdc) is 10.0 v 4.3.3.31.4.16.1 Enter pass/fail in result on Test Log 4.3.3.31.5 Set the signal generator frequency to 15 Hz 4.3.3.31.6 Within one minute:

4.3.3.31.6.1 Check source indicator is off 4.3.3.31.6.1.1 Enter pass/fail in result on Test Log 4.3.3.31.6.2 HIGH alarm indicator is flashing 4.3.3.31.6.2.1 Enter pass/fail in result on Test Log 4.3.3.31.6.3 HIGH alarm relay is de-energized 4.3.3.31.6.3.1 Enter pass/fail in result on Test Log 4.3.3.31.6.4 Auxiliary output is de-energized 4.3.3.31.6.4.1 Enter pass/fail in result on Test Log 4.3.3.31.6.5 WARN alarm indicator is flashing 4.3.3.31.6.5.1 Enter pass/fail in result on Test Log 4.3.3.31.6.6 WARN alarm relay is de-energized 4.3.3.31.6.6.1 Enter pass/fail in result on Test Log 4.3.3.31.67 -- Fail indicator is off 4.3.3.31.6.7.1 Enter pass/fail in result on Test Log 4.3.3.31.6.8 Fail relay is energized 4.3.3.31.6.8.1 Enter pass/fail in result on Test Log 4.3.3.31.6.9 Range indicator is on red 4.3.3.31.6.9.1 Enter pass/fail in result on Test Log 4.3.3.31.6.10 Bargraph is red 4.3.3.31.6.10.1 Enter pass/fail in result on Test Log 4.3.3.31.6.11 Bargraph all segments lit 4.3.3.31.6.11.1 Enter pass/fail in result on Test Log 4.3.3.31.6.12 Backlight is off

... .-4.3.3.31.612.1.1-Enter pass/fail in result on Test Log 4.3.3.31.6.13 Radiation value displayed on front panel is EEEEE 4.3.3.31.6.13.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 12302 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION 9Z'YW 123 of 246 PLN

4.3.3.31.6.14 Analog output 1 (4-20mA) is 20.0 ma 4.3.3.31.6.14.1 Enter pass/fail in result on Test Log 4.3.3.31.6.15 Analog output 2 (4-20mA) is 20.0 ma 4.3.3.31.6.15.1 Enter pass/fail in result on Test Log 4.3.3.31.6.16 Analog output 3 (0-10Vdc) is 10.0 v 4.3.3.31.6.16.1 Enter pass/fail in result on Test Log 4.3.3.31.7 Press ALARM ACKNOWLEDGE pushbutton to acknowledge alarms 4.3.3.31.8 After approximately 2 seconds, Press ALARM ACKNOWLEDGE pushbutton again to clear overrange 4.3.3.31.9 Check source indicator is off 4.3.3.31.9.1 Enter pass/fail in result on Test Log 4.3.3.31.10 HIGH alarm indicator is off 4.3.3.31.10.1 Enter pass/fail in result on Test Log 4.3.3.31.11 HIGH alarm relay is energized 4.3.3.31.11.1 Enter pass/fail in result on Test Log 4.3.3.31.12 Auxiliary output is energized 4.3.3.31.12.1 Enter pass/fail in result on Test Log 4.3.3.31.13 WARN alarm indicator is off 4.3.3.31.13.1 Enter pass/fail in result on Test Log 4.3.3.31.14 WARN alarm relay is energized 4.3.3.31.14.1 Enter pass/fail in result on Test Log 4.3.3.31.15 Fail indicator is off 4.3.3.31.15.1 Enter pass/fail in result on Test Log 4.3.3.31.16 Fail relay is energized 4.3.3.31.16.1 Enter pass/fail in result on Test Log 4.3.3.31.17 Range indicator is off 4.3.3.31.17.1 Enter pass/fail in result on Test Log 4.3.3.31.18 Bargraph is green 4.3.3.31.18.1 Enter pass/fail in result on Test Log 4.3.3.31.19 Bargraph has 6 segments lit 4.3.3.31.19.1 Enter pass/fail in result on Test Log 4.3.3.31.20 Backlight is on mR/h 4.3.3.31.20.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 1o 3/o2 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. TSIZE 1 3076 PRODUCTION I .0Z'( 124 of 246 1 PLN

4.3.3.31.21 Radiation value displayed on front panel is .900 mR/h 4.3.3.31.21.1 Enter pass/fail in result on Test Log 4.3.3.31.22 Analog output 1 (4-20rnA) is 10.25 ma 4.3.3.31.22.1 Enter pass/fail in result on Test Log 4.3.3.31.23 Analog output 2 (4-2OmA) is 10.25 ma 4.3.3.31.23.1 Enter pass/fail in result on Test Log 4.3.3.31.24 Analog output 3 (0-1OVdc) is 3.91 v 4.3.3.31.24.1 Enter pass/fail in result on Test Log 4.3.3.32 Test 32: Check Source mode 4.3.3.32.1 Press and hold down the Check Source pushbutton 4.3.3.32.2 Set signal generator frequency to 331 Hz 4.3.3.32.3 After one minute 4.3.3.32.3.1 Check source indicator is on, green 4.3.3.32.3.1.1 Enter pass/fail in result on Test Log 4.3.3.32.3.2 HIGH alarm indicator is off 4.3.3.32.3.2.1 Enter pass/fail in result on Test Log 4.3.3.32.3.3 HIGH alarm relay is energized 4.3.3.32.3.3.1 Enter pass/fail in result on Test Log 4.3.3.32.3.4 Auxiliary output is energized 4.3.3.32.3.4;1--Enter pass/fail in result on Test Log 4.3.3.32.3.5 WARN alarm indicator is off 4.3.3.32.3.5.1 Enter pass/fail in result on Test Log 4.3.3.32.3.6 WARN alarm relay is energized 4.3.3.32.3.6.1 Enter pass/fail in result on Test Log 4.3.3.32.3.7 Fail indicator is off 4.3.3.32.3.7.1 Enter pass/fail in result on Test Log 4.3.3.32.3.8 Fail relay is energized

_ -4.3.3.32.3.8.1 Enter pass/fail in result on Test Log 4.3.3.32.3.9 Range indicator is off 4.3.3.32.3.9.1 Enter pass/fail in result on Test Log 4.3.3.32.3.10 Bargraph is green 4.3.3.32.3.10.1 Enter pass/fail in result on Test Log DATE 11TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 1o13/02 PROCEDURE, 9405603 ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE REV 1 3076 PRODUCTION 9ZZ(

,I 125 of 246 PLN

4.3.3.32.3.11 Bargraph has segments lit to reflect the digital reading, up to 9 segments lit 4.3.3.32.3.11.1 Enter pass/fail in result on Test Log 4.3.3.32.3.12 Backlight is on mR/h 4.3.3.32.3.12.1 Enter pass/fail in result on Test Log 4.3.3.32.3.13 Radiation value displayed on front panel is updating, to 19.9 mR/h 4.3.3.32.3.13.1 Enter pass/fail in result on Test Log 4.3.3.32.3.14 Analog output I (4-2OmA) is 4 mA 4.3.3.32.3.14.1 Enter pass/fail in result on Test Log 4.3.3.32.3.15 Analog output 2 (4-2OmA) is 4 mnA 4.3.3.32.3.15.1 Enter pass/fail in result on Test Log 4.3.3.32.3.16 Analog output 3 (0-10Vdc) is 0 Vdc 4.3.3.32.3.16.1 Enter pass/fail in result on Test Log 4.3.3.32.4 Set signal generator frequency to 1.68 kHz 4.3.3.32.5 After one minute:

4.3.3.32.5.1 Check source indicator is on, green 4.3.3.32.5.1.1 Enter pass/fail in result on Test Log 4.3.3.32.5.2 HIGH alarm indicator is off 4.3.3.32.5.2.1 Enter pass/fail in result on Test Log 4.3.3.32.5.3 HIGH alarm relay is energized 4.3.3.32.5.3.1 Enter pass/fail in result on Test Log 4.3.3.32.5.4 Auxiliary output is energized 4.3.3.32.5.4.1 Enter pass/fail in result on Test Log 4.3.3.32.5.5 WARN alarm indicator is off 4.3.3.32.5.5.1 Enter pass/fail in result on Test Log 4.3.3.32.5.6 WARN alarm relay is energized 4.3.3.32.5.6.1 Enter pass/fail in result on Test Log 4.3.3.32.5.7 Fail indicator is off 4.3.3.32.5.7.1 Enter pass/fail in result on Test Log 4.3.3.32.5.86_Eail relay is energized

_4.3.3.32.5.8JEnter~pass/fail in result on Test Log 4.3.3.32.5.9 Range indicator is off 4.3.3.32.5.9.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNcOR RADIATION MANAGEMENT I 10-23/02 PROCEDURE, 9405603 DOC CTRL SHEET NO. SIZE REV ECN NO. RELEASED FOR PRODUCTION 9?£ýiWi' 126 of 246 PILN 1 3076

4.3.3.32.5.10 Bargraph is green 4.3.3.32.5.10.1 Enter pass/fail in result on Test Log 4.3.3.32.5.11 Bargraph has segments lit to reflect the digital reading, up to 12 segments lit 4.3.3.32.5.11.1 Enter pass/fail in result on Test Log 4.3.3.32.5.12 Backlight is on mR/h 4.3.3.32.5.12.1 Enter pass/fail in result on Test Log 4.3.3.32.5.13 Radiation value displayed on front panel is updating to

.101 R/h 4.3.3.32.5.13.1 Enter pass/fail in result on Test Log 4.3.3.32.5.14 Analog output I (4-2OmA) is 4 mA 4.3.3.32.5.14.1 Enter pass/fail in result on Test Log 4.3.3.32.5.15 Analog output 2 (4-2OmA) is 4 mA 4.3.3.32.5.15.1 Enter pass/fail in result on Test Log 4.3.3.32.5.16 Analog output 3 (0-10Vdc) is 0 Vdc 4.3.3.32.5.16.1 Enter pass/fail in result on Test Log 4.3.3.32.6 Set signal generator frequency to 15 Hz 4.3.3.32.7 Release the Check Source pushbutton 4.3.3.32.8 Within one minute 4.3.3.32.8.1 Check source indicator is off 4.3.3.32.8.1.1 Enter pass/fail in result on Test Log 4.3.3.32.8.2 HIGH alarm indicator is off 4.3.3.32.8.2.1 Enter pass/fail in result on Test Log 4.3.3.32.8.3 HIGH alarm relay is energized 4.3.3.32.8.3.1 Enter pass/fail in result on Test Log 4.3.3.32.8.4 Auxiliary output is energized 4.3.3.32.8.4.1 Enter pass/fail in result on Test Log 4.3.3.32.8.5 WARN alarm indicator is off 4.3.3.32.8.5.1 Enter pass/fail in result on Test Log 4.3.3.32.8.6 WARN alarm relay is energized 4.3.3.32.8.6.1 Enter pass/fail in result on Test Log 4.3.3.32.8.7 Fail indicator is off 4.3.3.32.8.7.1 Enter pass/fail in result on Test Log -U DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT I---_ 32 -PROCEDURE, 9405603 SHEET NO. SIZE REV ECN NO. RELEASED FOR DOC CTRL 94097603V2P PLN 3076 PRODUCTION DUCTION ,9Z'%,W 127 of 246

4.3.3.32.8.8 Fail relay is energized 4.3.3.32.8.8.1 Enter pass/fail in result on Test Log 4.3.3.32.8.9 Range indicator is off 4.3.3.32.8.9.1 Enter pass/fail in result on Test Log 4.3.3.32.8.10 Bargraph is green 4.3.3.32.8.10.1 Enter pass/fail in result on Test Log 4.3.3.32.8.11 Bargraph has 6 segments lit 4.3.3.32.8.11.1 Enter pass/fail in result on Test Log 4.3.3.32.8.12 Backlight is on mR/h 4.3.3.32.8.12.1 Enter pass/fail in result on Test Log 4.3.3.32.8.13 Radiation value displayed on front panel is .900 mR/h 4.3.3.32.8.13.1 Enter pass/fail in result on Test Log 4.3.3.32.8.14 Analog output I (4-20mA) is 10.25 ma 4.3.3.32.8.14.1 Enter pass/fail in result on Test Log 4.3.3.32.8.15 Analog output 2 (4-20mA) is 10.25 ma 4.3.3.32.8.15.1 Enter pass/fail in result on Test Log 4.3.3.32.8.16 Analog output 3 (0-1OVdc) is 3.91 v 4.3.3.32.8.16.1 Enter pass/fail in result on Test Log 4.3.3.33 Test 33: Calibration mode 4.3.3.33.1 Turn rotary set point switch to position 8 and press ENTER pushbutton (Frequency is 15.0 Hz).

4.3.3.33.2 Front panel display is 6.OOE1 (time in seconds) 4.3.3.33.2.1 Enter pass/fail on Test Log 4.3.3.33.3 First digit is flashing 4.3.3.33.3.1 Enter pass/fail in result on Test Log 4.3.3.33.4 Check source indicator is off 4.3.3.33.4.1 Enter pass/fail in result on Test Log 4.3.3.33.5 HIGH alarm indicator is off 4.3.3.33.5.1 Enter pass/fail in result on Test Log 4.3.3.33.6 HIGH alarm relay is de-energized

-43.3.33.6.1--Enter pass/fail in result on Test Log 4.3.3.33.7 Auxiliary output is de-energized 4.3.3.33.7.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 3/2PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION .9'Id 128 of 246 PLN I II

4.3.3.33.8 WARN alarm indicator is off 4.3.3.33.8.1 Enter pass/fail in result on Test Log 4.3.3.33.9 WVARN alarm relay is de-energiz'bd 4.3.3.33.9.1 Enter pass/fail in result on Test Log 4.3.3.33.10 Fail indicator is on 4.3.3.33.10.1 Enter pass/fail in result on Test Log 4.3.3.33.11 Fail relay is de-energized 4.3.3.33.11.1 Enter pass/fail in result on Test Log 4.3.3.33.12 Range indicator is off 4.3.3.33.12.1 Enter pass/fail in result on Test Log 4.3.3.33.13 Bargraph has no segments lit 4.3.3.33.13.1 Enter pass/fail in result on Test Log 4.3.3.33.14 Backlights are off 4.3.3.33.14.1 Enter pass/fail in result on Test Log 4.3.3.33.15 Analog output I (4-20mA) is 10.25 ma 4.3.3.33.15.1 Enter pass/fail in result on Test Log 4.3.3.33.16 Analog output 2 (4-20mA) is 10.25 ma 4.3.3.33.16.1 Enter pass/fail in result on Test Log 4.3.3.33.17 Analog output 3 (0-1OVdc) is 3.91 v 4.3.3.33.17.1 Enter pass/fail in result on Test Log 4.3.3.33.18 Press ENTER pushbutton to start calibrate timer 4.3.3.33.19 All three backlights are flashing, mR/h, Rh and kRJh are flashing 4.3.3.33.19.1 Enter pass/fail on Test Log 4.3.3.33.20 After one minute:

4.3.3.33.21 Front panel display is 9.00E2 4.3.3.33.21.1 Enter pass/fail on Test Log 4.3.3.33.22 All digits are on steady 4.3.3.33.22.1 Enter pass/fail on Test Log 4.3.3.33.23 Check source indicator is off 4.3.3.33.23.1 Enter pass/fail in result on Test Log 4.3.3.33.24 HIGH alarm indicator is off 4.3.3.33.24.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNcoR RADIA7iON MANAGEMENT 1I3/ PROCEDURE, 9405603 REV ECN NO. NO. SIZE 94095603VTP L 1 3076

4.3.3.33.25 HIGH alarm relay is de-energized 4.3.3.33.25.1 Enter pass/fail in result on Test Log 4.3.3.33.26 Auxiliary output is de-energized 4.3.3.33.26.1 Enter pass/fail in result on Test Log 4.3.3.33.27 WARN alarm indicator is off 4.3.3.33.27.1 Enter pass/fail in result on Test Log 4.3.3.33.28 WARN alarm relay is de-energized 4.3.3.33.28.1 Enter pass/fail in result on Test Log 4.3.3.33.29 Fail indicator is on 4.3.3.33.29.1 Enter pass/fail in result on Test Log 4.3.3.33.30 Fail relay is de-energized 4.3.3.33.30.1 Enter pass/fail in result on Test Log 4.3.3.33.31 Range indicator is off 4.3.3.33.31.1 Enter pass/fail in result on Test Log 4.3.3.33.32 Bargraph has no segments lit 4.3.3.33.32.1 Enter pass/fail in result on Test Log 4.3.3.33.33 All Backlights are off 4.3.3.33.33.1 Enter pass/fail in result on Test Log 4.3.3.33.34 Analog output 1 (4-2OmA) is 10.25 ma 4.3.3.33.34.1 Enter.pass/fail in result on Test Log 4.3.3.33.35 Analog output 2 (4-20mA) is 10.25 ma 4.3.3.33.35.1 Enter pass/fail in result on Test Log 4.3.3.33.36 Analog output 3 (0-1OVdc) is 3.91 v 4.3.3.33.36.1 Enter pass/fail in result on Test Log 4.3.3.33.37 Press ENTER pushbutton to re-enter set point change mode 4.3.3.33.38 Front panel display is 6.OOE1 (time in seconds) 4.3.3.33.38.1 Enter pass/fail on Test Log 4.3.3.33.39 First digit is flashing 4.3.3.33.39.1 Enter pass/fail in result on Test Log 4.3.3.33.40 Check source indicator is off 4.3.3.33.40.1 Enter pass/fail in result on Test Log 4.3.3.33.41 HIGH alarm indicator is off 4.3.3.33.41.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 10 PROCEDURE, 9405603 DOC CTRL SHEET NO. SIZE REV ECN NO. RELEASED FOR 763076 PRODUCTION .*((947. 130 of 246 PLN

4.3.3.33.42 HIGH alarm relay is de-energized 4.3.3.33.42.1 Enter pass/fail in result on Test Log 4.3.3.33.43 Auxiliary output is de-energized 4.3.3.33.43.1 Enter pass/fail in result on Test Log 4.3.3.33.44 WARN alarm indicator is off 4.3.3.33.44.1 Enter pass/fail in result on Test Log 4.3.3.33.45 WARN alarm relay is de-energized 4.3.3.33.45.1 Enter pass/fail in result on Test Log 4.3.3.33.46 Fail indicator is on 4.3.3.33.46.1 Enter pass/fail in result on Test Log 4.3.3.33.47 Fail relay is de-energized 4.3.3.33.47.1 Enter pass/fail in result on Test Log 4.3.3.33.48 Range indicator is off 4.3.3.33.48.1 Enter pass/fail in result on Test Log 4.3.3.33.49 Bargraph has no segments lit 4.3.3.33.49.1 Enter pass/fail in result on Test Log 4.3.3.33.50 Backlights are off 4.3.3.33.50.1 Enter pass/fail in result on Test Log 4.3.3.33.51 Analog output I (4-20mA) is 10.25 ma 4.3.3.33.51.1 , Enter pass/fail in-result on Test Log 4.3.3.33.52 Analog output 2 (4-2OmA) is 10.25 ma 4.3.3.33.52.1 Enter pass/fail in result on Test Log 4.3.3.33.53 Analog output 3 (0-1OVdc) is 3.91 v 4.3.3.33.53.1 Enter pass/fail in result on Test Log 4.3.3.33.54 Press ENTER pushbutton to start calibrate timer 4.3.3.33.55 All three backlights, mR/h, RPh and kR/h are flashing 4.3.3.33.55.1 Enter pass/fail in result on Test Log 4.3.3.33.56 Press ENTER pushbutton, to stop calibrate timer 4.3.3.33.57 Front panel display is approximately 7.50E1 4.3.3.33.57.1 Enter pass/fail on Test Log 4.3.3.33.58 All digits are steady on 4.3.3.33.58.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNcOR RADIATION MANAGEMENT 1023102 -- PROCEDURE,9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION CZf 131 of 246 PLN

4.3.3.33.59 Check source indicator is off 4.3.3.33.59.1 Enter pass/fail in result on Test Log 4.3.3.33.60 HIGH alarm indicator is off 4.3.3.33.60.1 Enter pass/fail in result on Test Log 4.3.3.33.61 HIGH alarm relay is de-energized 4.3.3.33.61.1 Enter pass/fail in result on Test Log 4.3.3.33.62 Auxiliary output is de-energized 4.3.3.33.62.1 Enter pass/fail in result on Test Log 4.3.3.33.63 WARN alarm indicator is off 4.3.3.33.63.1 Enter pass/fail in result on Test Log 4.3.3.33.64 WARN alarm relay is de-energized 4.3.3.33.64.1 Enter pass/fail in result on Test Log 4.3.3.33.65 Fail indicator is on 4.3.3.33.65.1 Enter pass/fail in result on Test Log 4.3.3.33.66 Fail relay is de-energized 4.3.3.33.66.1 Enter pass/fail in result on Test Log 4.3.3.33.67 Range indicator is off 4.3.3.33.67.1 Enter pass/fail in result on Test Log 4.3.3.33.68 Bargraph has no segments lit 4.3.3.33.68.1 Enter pass/fail in result on Test Log 4.3.3.33.69 Backlights are off 4.3.3.33.69.1 Enter pass/fail in result on Test Log 4.3.3.33.70 Analog output 1 (4-2OmA) is 10.25 ma 4.3.3.33.70.1 Enter pass/fail in result on Test Log 4.3.3.33.71 Analog output 2 (4-2OmA) is 10.25 ma 4.3.3.33.71.1 Enter pass/fail in result on Test Log 4.3.3.33.72 Analog output 3 (0-10Vdc) is 3.91 v 4.3.3.33.72.1 Enter pass/fail in result on Test Log 4.3.3.33.73 Turn rotary set point switch to position 9 to exit Calibrate mode 4.3.3.33.74 Check source indicator is off 4.3.3.33.74.1 Enter pass/fail in result on Test Log 4.3.3.33.75 HIGH alarm indicator is off 4.3.3.33.75.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 10/23102 - PROCEDURE, 9405603 ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE REV 1 3076 PRODUCTION .0421v& 132 of 246 PLN

4.3.3.33.76 HIGH alarm relay is energized 4.3.3.33.76.1 Enter pass/fail in result on Test Log 4.3.3.33.77 Auxiliary output is energized 4.3.3.33.77.1 Enter pass/fail in result on Test Log 4.3.3.33.78 WARN alarm indicator is off 4.3.3.33.78.1 Enter pass/fail in result on Test Log 4.3.3.33.79 WARN alarm relay is energized 4.3.3.33.79.1 Enter pass/fail in result on Test Log 4.3.3.33.80 Fail indicator is off 4.3.3.33.80.1 Enter pass/fail in result on Test Log 4.3.3.33.81 Fail relay is energized 4.3.3.33.81.1 Enter pass/fail in result on Test Log 4.3.3.33.82 Range indicator is off 4.3.3.33.82.1 Enter pass/fail in result on Test Log 4.3.3.33.83 Bargraph is green 4.3.3.33.83.1 Enter pass/fail in result on Test Log 4.3.3.33.84 Bargraph has 6 segments lit 4.3.3.33.84.1 Enter pass/fail in result on Test Log 4.3.3.33.85 Backlight is on mR/h 4.3.3.33.85.1 Enter pass/fail in result on Test Log 4.3.3.33.86 Radiation value displayed on front panel is. 900 mR/h 4.3.3.33.86.1 Enter pass/fail in result on Test Log 4.3.3.33.87 Analog output I (4-20mA) is 10.25 ma 4.3.3.33.87.1 Enter pass/fail in result on Test Log 4.3.3.33.88 Analog output 2 (4-20mA) is 10.25 ma 4.3.3.33.88.1 Enter pass/fail in result on Test Log 4.3.3.33.89 Analog output 3 (0-1OVdc) is 3.91 v 4.3.3.33.89.1 Enter pass/fail in result on Test Log 4.3.3.33.89.2 Increase the signal generator frequency to 17.0 Hz to trip the Warn alarm 4.3.3.33.90 Within 1 minute:

4.3.3.33.90.1 Check source indicator is off 4.3.3.33.90.1.1 Enter pass/fail in result on Test Log DATE TrTLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION ,,Y%4'Y( 133 of 246 4 PLN

4.3.3.33.90.2 HIGH alarm indicator is off 4.3.3.33.90.2.1 Enter pass/fail in result on Test Log 4.3.3.33.90.3 HIGH alarm relay is energized 4.3.3.33.90.3.1 Enter pass/fail in result on Test Log 4.3.3.33.90.4 Auxiliary output is energized 4.3.3.33.90.4.1 Enter pass/fail in result on Test Log 4.3.3.33.90.5 WARN alarm indicator is flashing 4.3.3.33.90.5.1 Enter pass/fail in result on Test Log 4.3.3.33.90.6 WARN alarm relay is de-energized 4.3.3.33.90.6.1 Enter pass/fail in result on Test Log 4.3.3.33.90.7 Fail indicator is off 4.3.3.33.90.7.1 Enter pass/fail in result on Test Log 4.3.3.33.90.8 Fail relay is energized 4.3.3.33.90.8.1 Enter pass/fail in result on Test Log 4.3.3.33.90.9 Range indicator is off 4.3.3.33.90.9.1 Enter pass/fail in result on Test Log 4.3.3.33.90.10 Bargraph is amber 4.3.3.33.90.10.1 Enter pass/fail in result on Test Log 4.3.3.33.90.11 Bargraph has 6 segments lit 4.3.3.33.90.11.1 Enter pass/fail in result on Test Log 4.333..90.12-Ba'cklight isonmR/R-4.3.3.33.90.12.1 Enter pass/fail in result on Test Log 4.3.3.33.90.13 Radiation value displayed on front panel is 1.02 mR/h 4.3.3.33.90.13.1 Enter pass/fail in result on Test Log 4.3.3.33.90.14Analog output 1 (4-2OmA) is 10.43 ma 4.3.3.33.90.14.1 Enter pass/fail in result on Test Log 4.3.3.33.90.15 Analog output 2 (4-2OmA) is 10.43 ma 4.3.3.33.90.15.1 Enter pass/fail in result on Test Log 4.3.3.33.90.16 Analog output 3 (0-1OVdc) is 4.02 v 4.3.3.33.90.16.1 Enter pass/fail in result on Test Log 4.3.3.33.91 Turn rotary set point switch to position 8 and press ENTER pushbutton to enter Calibrate mode and note Warn clear 4.3.3.33.92 Front panel display is 6.OOEI (time in seconds) 4.3.3.33.92.1 Enter pass/fail on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT Io3Io2 PROCEDURE, 9405603 DOC CTRL SHEET NO. SIZE REV ECN NO. RELEASED FOR 1 3076 PRODUCTION ,Z?'YW( 134 of 246 PLN

4.3.3.33.93 First digit is flashing 4.3.3.33.93.1 Enter pass/fail in result on Test Log 4.3.3.33.94 Check source indicator is off 4.3.3.33.94.1 Enter pass/fail in result on Test Log 4.3.3.33.95 HIGH alarm indicator is off 4.3.3.33.95.1 Enter pass/fail in result on Test Log 4.3.3.33.96 HIGH alarm relay is de-energized 4.3.3.33.96.1 Enter pass/fail in result on Test Log 4.3.3.33.97 Auxiliary output is de-energized 4.3.3.33.97.1 Enter pass/fail in result on Test Log 4.3.3.33.98 WARN alarm indicator is off 4.3.3.33.98.1 Enter pass/fail in result on Test Log 4.3.3.33.99 WARN alarm relay is de-energized 4.3.3.33.99.1 Enter pass/fail in result on Test Log 4.3.3.33.100 Fail indicator is on 4.3.3.33.100.1 Enter pass/fail in result on Test Log 4.3.3.33.101 Fail relay is de-energized 4.3.3.33.101.1 Enter pass/fail in result on Test Log 4.3.3.33.102 Range indicator is off 4.3.3.33.102.1 Enter pass/fail in result on Test Log 4.3.3.33.103 Bargraph has no segments lit 4.3.3.33.103.1 Enter pass/fail in result on Test Log 4.3.3.33.104 Backlight is off 4.3.3.33.104.1 Enter pass/fail in result on Test Log 4.3.3.33.105 Analog output 1 (4-20mA) is 10.43 ma 4.3.3.33.105.1 Enter pass/fail in result on Test Log 4.3.3.33.106 Analog output 2 (4-2OmA) is 10.43 ma 4.3.3.33.106.1 Enter pass/fail in result on Test Log 4.3.3.33.107 Analog output 3 (0-10Vdc) is 4.02 v 4.3.3.33.107.1 Enter pass/fail in result on Test Log DATE T=I3E SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT iQ' --

2PROCEDURE, 9405603 RELEASED FOR DOC CTRL SHEET NO. SIZE REV ECN NO.

1 3076 PRODUCTION ,%¥" 135 of 246 PLN

4.3.3.33.108 Turn rotary set point switch to position 9 to exit Calibrate mode 4.3.3.33.109 Within 5 seconds:

4.3.3.33.110 Check source indicator is off 4.3.3.33.110.1 Enter pass/fail in result on Test Log 4.3.3.33.111 HIGH alarm indicator is off 4.3.3.33.111.1 Enter pass/fail in result on Test Log 4.3.3.33.112 HIGH alarm relay is energized 4.3.3.33.112.1 Enter pass/fail in result on Test Log 4.3.3.33.113 Auxiliary output is energized 4.3.3.33.113.1 Enter pass/fail in result on Test Log 4.3.3.33.114 WARN alarm indicator is flashing 4.3.3.33.114.1 Enter pass/fail in result on Test Log 4.3.3.33.115 WARN alarm relay is de-energized 4.3.3.33.115.1 Enter pass/fail in result on Test Log 4.3.3.33.116 Fail indicator is off 4.3.3.33.116.1 Enter pass/fail in result on Test Log 4.3.3.33.117 Fail relay is energized 4.3.3.33.117.1 Enter pass/fail in result on Test Log 4.3.3.33.118 Range indicator is off 4.3.3.33.118.1 Enter pass/fail in result on Test Log 4.3.3.33.119, Bargraph is amber -

4.3.3.33.119.1 Enter pass/fail in result on Test Log 4.3.3.33.120 Bargraph has 6 segments lit 4.3.3.33.120.1 Enter pass/fail in result on Test Log 4.3.3.33.121 Backlight is on mR/h 4.3.3.33.121.1 Enter pass/fail in result on Test Log 4.3.3.33.122 Radiation value displayed on front panel is 1.02 mR/h 4.3.3.33.122.1 Enter pass/fail in result on Test Log 4.3.3.33.123 Analog output I (4-20mA) is 10.43 ma 4.3.3.33.123.1 Enter pass/fail in result on Test Log 4.3.3.33.124 Analog output 2 (4-2OmA) is 10.43 ma 4.3.3.33.124.1 Enter pass/fail in result on Test Log 4.3.3.33.125 Analog output 3 (0-10Vdc) is 4.02 v 4.3.3.33.125.1.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT Io 3102 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. 95 TS.E 1 3076 PRODUCTION eiY4M 136 of 246 PLN

4.3.3.33.126 increase the signal generator frequency to 1.68 kHz 4.3.3.33.127 Within 1 minute:

4.3.3.33.128 Check source indicator is off 4.3.3.33.128.1 Enter pass/fail in result on Test Log 4.3.3.33.129 HIGH alarm indicator is flashing 4.3.3.33.129.1 Enter pass/fail in result on Test Log 4.3.3.33.130 HIGH alarm relay is de-energized 4.3.3.33.130.1 Enter pass/fail in result on Test Log 4.3.3.33.131 Auxiliary output is de-energized 4.3.3.33.131.1 Enter pass/fail in result on Test Log 4.3.3.33.132 WARN alarm indicator is flashing 4.3.3.33.132.1 Enter pass/fail in result on Test Log 4.3.3.33.133 WARN alarm relay is de-energized 4.3.3.33.133.1 Enter pass/fail in result on Test Log 4.3.3.33.134 Fail indicator is off 4.3.3.33.134.1 Enter pass/fail in result on Test Log 4.3.3.33.135 Fail relay is energized 4.3.3.33.135.1 Enter pass/fail in result on Test Log 4.3.3.33.136 Range indicator is off 4.3.3.33.136.1 Enter pass/fail in result on Test Log 4.3.3.33.137 Bargraph is red 4.3.3.33.137.1 Enter pass/fail in result on Test Log 4.3.3.33.138 Bargraph has 12 segments lit 4.3.3.33.138.1 Enter pass/fail in result on Test Log 4.3.3.33.139 Backlight is on R/h 4.3.3.33.139.1 Enter pass/fail in result on Test Log 4.3.3.33.140 Radiation value displayed on front panel is .101 R/h 4.3.3.33.140.1 Enter pass/fail in result on Test Log 4.3.3.33.141 Analog output 1 (4-20mA) is 16.81 ma 4.3.3.33.141.1 Enter pass/fail in result on Test Log 4.3.3.33.142 Analog output 2 (4-20mA) is 16.81 ma 4.3.3.33.142.1 Enter pass/fail in result on Test Log 4.3.3.33.143 Analog output 3 (0-1OVdc) is 8.01 v 4.3.3.33.143.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIAT1ON MANAGEMENT I PROCEDURE, 9405603 REV ECN NO. NO. SIZE 94095603VTP IPLN 1 3076 M

4.3.3.33.144 Turn rotary set point switch to position 8 and press ENTER pushbutton to enter Calibrate mode; Note Warn and High clear 4.3.3.33.145 Front panel display is 6.OOE1 (time in seconds) 4.3.3.33.145.1 Enter pass/fail on Test Log 4.3.3.33.146 First digit is flashing 4.3.3.33.146.1 Enter pass/fail in result on Test Log 4.3.3.33.147 Check source indicator is off 4.3.3.33.147.1 Enter pass/fail in result on Test Log 4.3.3.33.148 HIGH alarm indicator is off 4.3.3.33.148.1 Enter pass/fail in result on Test Log 4.3.3.33.149 HIGH alarm relay is de-energized 4.3.3.33.149.1 Enter pass/fail in result on Test Log 4.3.3.33.150 Auxiliary output is de-energized 4.3.3.33.150.1 Enter pass/fail in result on Test Log 4.3.3.33.151 WARN alarm indicator is off 4.3.3.33.151.1 Enter pass/fail in result on Test Log 4.3.3.33.152 WARN alarm relay is de-energized 4.3.3.33.152.1 Enter pass/fail in result on Test Log 4.3.3.33.153 Fail indicator is on 4.3.3.33.153.1 Enter pass/fail in result on Test Log 4.3.3.33.154 -Fail relay is de-energized 4.3.3.33.154.1 Enter pass/fail in result on Test Log 4.3.3.33.155 Range indicator is off 4.3.3.33.155.1 Enter pass/fail in result on Test Log 4.3.3.33.156 Bargraph has no segments lit 4.3.3.33.156.1 Enter pass/fail in result on Test Log 4.3.3.33.157 Backlights are off 4.3.3.33.157.1 Enter pass/fail in result on Test Log 4.3.3.33.158 Analog output I (4-2OmA) is 16.81 ma 4.3.3.33.158.1 Enter pass/fail in result on Test Log 4.3.3.33.159 Analog output 2 (4-20mA) is 16.81 ma 4.3.3.33.159.1 Enter pass/fail in result on Test Log 4.3.3.33.160 Analog output 3 (0-10Vdc) is 8.01 v 4.3.3.33.160.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT lPROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION 61?,111 138 of 246 1JPLN

4.3.3.33.161 Turn rotary set point switch to position 9 to exit Calibrate mode 4.3.3.33.162 Within 5 seconds:

4.3.3.33.163 Check source indicator is off 4.3.3.33.163.1 Enter pass/fail in result on Test Log 4.3.3.33.164 HIGH alarm indicator is flashing 4.3.3.33.164.1 Enter pass/fail in result on Test Log 4.3.3.33.165 HIGH alarm relay is de-energized 4.3.3.33.165.1 Enter pass/fail in result on Test Log 4.3.3.33.166 Auxiliary output is de-energized 4.3.3.33.166.1 Enter pass/fail in result on Test Log 4.3.3.33.167 WARN alarm indicator is flashing 4.3.3.33.167.1 Enter pass/fail in result on Test Log 4.3.3.33.168 WARN alarm relay is de-energized 4.3.3.33.168.1 Enter pass/fail in result on Test Log 4.3.3.33.169 Fail indicator is off 4.3.3.33.169.1 Enter pass/fail in result on Test Log 4.3.3.33.170 Fail relay is energized 4.3.3.33.170.1 Enter pass/fail in result on Test Log 4.3.3.33.171 Range indicator is off 4.3.3.33.171.1 Enter pass/fail in result on Test Log 4.3.3.33.172 Bargraph is red

- 4.3.3.33.1721 Enter pass/fail in result on Test Log 4.3.3.33.173 Bargraph has 12 segments lit 4.3.3.33.173.1 Enter pass/fail in result on Test Log 4.3.3.33.174 Backlight is on R/h 4.3.3.33.174.1 Enter pass/fail in result on Test Log 4.3.3.33.175 Radiation value displayed on front panel is .101 R/h 4.3.3.33.175.1 Enter pass/fail in result on Test Log 4.3.3.33.176 Analog output I (4-20mA) is 16.81 ma 4.3.3.33.176.1 Enter pass/fail in result on Test Log 4.3.3.33.177 Analog output 2 (4-20mA) is 16.81 ma

__ 4.3.3.33.177.1 Enter pass/fail in result on Test Log 4.3.3.33.178 Analog output 3 (0-10Vdc) is 8.01 v 4.3.3.33.178.1.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT - 10/23/02 -- PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION ,,Ze"(f 139 of 246 PLN

4.3.3.33.179 Decrease the signal generator frequency to 15 Hz 4.3.3.33.180 Press Acknowledge pushbutton to acknowledge alarms 4.3.3.33.181 Within 1 minute:

4.3.3.33.182 Check source indicator is off 4.3.3.33.182.1 Enter pass/fail in result on Test Log 4.3.3.33.183 HIGH alarm indicator is off 4.3.3.33.183.1 Enter pass/fail in result on Test Log 4.3.3.33.184 HIGH alarm relay is energized 4.3.3.33.184.1 Enter pass/fail in result on Test Log 4.3.3.33.185 Auxiliary output is energized 4.3.3.33.185.1 Enter pass/fail in result on Test Log 4.3.3.33.186 WARN alarm indicator is off 4.3.3.33.186.1 Enter pass/fail in result on Test Log 4.3.3.33.187 WARN alarm relay is energized 4.3.3.33.187.1 Enter pass/fail in result on Test Log 4.3.3.33.188 Fail indicator is off 4.3.3.33.188.1 Enter pass/fail in result on Test Log 4.3.3.33.189 Fail relay is energized 4.3.3.33.189.1 Enter pass/fail in result on Test Log 4.3.3.33.190 Range indicator is off 4.3.3.33.190.1 Enter pass/fail in result on Test Log 4.3.3.33.191 Bargraph is green 4.3.3.33.191.1 Enter pass/fail in result on Test Log 4.3.3.33.192 Bargraph has 6 segments lit 4.3.3.33.192.1 Enter pass/fail in result on Test Log 4.3.3.33.193 Backlight is on mR/h 4.3.3.33.193.1 Enter pass/fail in result on Test Log 4.3.3.33.194 Radiation value displayed on front panel is .900 mR/h 4.3.3.33.194.1 Enter pass/fail in result on Test Log 4.3.3.33.195 Analog output I (4-20mA) is 10.25 ma 4.3.3.33.195.1 Enter pass/fail in result on Test Log 4.3.3.33.196 Analog output 2 (4-2OmA) is 10.25 ma 4.3.3.33.196.1 Enter pass/fail in result on Test Log 4.3.3.33.197 Analog output 3 (O-10Vdc) is 3.91 v 4.3.3.33.197.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT -- PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION 'J¥I( 140 of 246 PLN

4.3.3.34 Test 34* Data Entry mode To change the value displayed, Each press of the VALUE pushbutton increments the flashing digit by one. Each press of the DIGIT pushbutton advances one digit to the right.

4.3.3.34.1 Select position 0 on data entry function switch (HIGH set point) and press ENTER pushbutton to enter data entry mode.

4.3.3.34.2 HIGH alarm limit of 1.00E2 is displayed on front panel 4.3.3.34.2.1 Enter pass/fail in result on Test Log 4.3.3.34.3 Left most digit is flashing 4.3.3.34.3.1 Enter pass/fail in result on Test Log 4.3.3.34.4 Change set point to 2.39-1 (below Warn Alarm Set Point) 4.3.3.34.5 Value displayed on front panel is 2.39-1 4.3.3.34.5.1 Enter pass/fail in result on Test Log 4.3.3.34.6 Press ENTER pushbutton to exit data entry mode 4.3.3.34.7 Value displayed on front panel is .900 mR/h 4.3.3.34.7.1 Enter pass/fail in result on Test Log 4.3.3.34.7.2 Check source indicator is off 4.3.3.34.7.2.1 Enter pass/fail in result on Test Log 4.3.3.34.7.3 HIGH alarm indicator is off 4.3.3.34.7.3.1 Enter pass/fail in result on Test Log 4.3.3.34.7.4 HIGH alarm relay is energized 4.3.3.34.7.4.1 Enter pass/fail in result on Test Log 4.3.3.34.7.5 Auxiliary output is energized 4.3.3.34.7.5.1 Enter pass/fail in result on Test Log 4.3.3.34.7.6 WARN alarm indicator is off 4.3.3.34.7.6.1 Enter pass/fail in result on Test Log 4.3.3.34.7.7 WARN alarm relay is energized 4.3.3.34.7.7.1 Enter pass/fail in result on Test Log 4.3.3.34.7.8 Fail indicator is off 4.3.3.34.7.8.1 Enter pass/fail in result on Test Log 4.3.3.34.7.9 Fail relay is energized 4.3.3.34.7.9.1 Enter pass/fail in result on Test Log 4.3.3.34.7. Range indicator is off 4.3.3.34.7.10.1 Enter pass/fail in result on Test Log 4.3.3.34.7.11 Bargraph is green 4.3.3.34.7.11.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT -- 023/02 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION f?%*1( 141 of 246 PLN

4.3.3.34.7.12 Bargraph has 6 segments lit 4.3.3.34.7.12.1 Enter pass/fail in result on Test Log 4.3.3.34.7.13 Backlight is on mR/h 4.3.3.34.7.13.1 Enter pass/fail in result on Test Log 4.3.3.34.7.14 Radiation value displayed on front panel is .900 mR/h 4.3.3.34.7.14.1 Enter pass/fail in result on Test Log 4.3.3.34.7.15 Analog output I (4-2OmA) is 10.25 ma 4.3.3.34.7.15.1 Enter pass/fail in result on Test Log 4.3.3.34.7.16 Analog output 2 (4-20mA) is 10.25 ma 4.3.3.34.7.16.1 Enter pass/fail in result on Test Log 4.3.3.34.7.17 Analog output 3 (0-10Vdc) is 3.91 4.3.3.34.7.17.1 Enter pass/fail in result on Test Log 4.3.3.34.8 Press ENTER pushbutton to re-enter data entry mode 4.3.3.34.9 Left most digit is flashing 4.3.3.34.9.1 Enter pass/fail in result on Test Log 4.3.3.34.10 Value displayed on front panel remains at 1.00E2 (Invalid set point not accepted) 4.3.3.34.10.1 Enter pass/fail in result on Test Log 4.3.3.34.11 Change-set point to 1.10E2 4.3.3.34.12 Value displayed on front panel is 1.10E2 4.3.3.34.12.1 Enter pass/fail in result on Test Log 4.3.3.34.13 Press ENTER pushbutton to exit data entry mode 4.3.3.34.13.1 Check source indicator is off 4.3.3.34.13.1.1 Enter pass/fail in result on Test Log 4.3.3.34.13.2 HIGH alarm indicator is off 4.3.3.34.13.2.1 Enter pass/fail in result on Test Log 4.3.3.34.13.3 --HIGH alarm relay is energized 4.3.3.34.13.3.1 Enter pass/fail in result on Test Log 4.3.3.34.13.4 Auxiliary output is energized

-4.3.3.34.13.4.1 - - Enter pass/fail in result on Test Log 4.3.3.34.13.5 WARN alarm indicator is off 4.3.3.34.13.5.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT -- PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION ,9M/W 1 142 of 246 PLN

4.3.3.34.13.6 WARN alarm relay is energized 4.3.3.34.13.6.1 Enter pass/fail in result on Test Log 4.3.3.34.13.7 Fail indicator is off 4.3.3.34.13.7.1 Enter pass/fail in result on Test Log 4.3.3.34.13.8 Fail relay is energized 4.3.3.34.13.8.1 Enter pass/fail in result on Test Log 4.3.3.34.13.9 Range indicator is off 4.3.3.34.13.9.1 Enter pass/fail in result on Test Log 4.3.3.34.13.10 Bargraph is green 4.3.3.34.13.10.1 Enter pass/fail in result on Test Log 4.3.3.34.13.11 Bargraph has 6 segments lit 4.3.3.34.13.11.1 Enter pass/fail in result on Test Log 4.3.3.34.13.12 Backlight is on mR/h 4.3.3.34.13.12.1 Enter pass/fail in result on Test Log 4.3.3.34.13.13 Radiation value displayed on front panel is .900 mPRh 4.3.3.34.13.13.1 Enter pass/fail in result on Test Log 4.3.3.34.13.14Analog output I (4-2OmA) is 10.25 ma 4.3.3.34.13.14.1 Enter pass/fail in result on Test Log 4.3.3.34.13.15Analog output 2 (4-20mA) is 10.25 ma 4.3.3.34.13.15.1 Enter pass/fail in result on Test Log 4.3.3.34.13.16 Analog output 3 (0-10Vdc) is 3.91 4.3.3.34.13.16.1 Enter pass/fail in result on Test Log 4.3.3.34.14 Press HIGH pushbutton 4.3.3.34.15 Value displayed on front panel is 1.1 0E2 4.3.3.34.15.1 Enter pass/fail in result on Test Log 4.3.3.34.16 Press the ENTER pushbutton 4.3.3.34.17 Left most digit is flashing 4.3.3.34.17.1 Enter pass/fail in result on Test Log 4.3.3.34.18 Value displayed on front panel is 1.10E2 4.3.3.34.18.1 Enter pass/fail in result on Test Log 4.3.3.34.19 Return set point 0 to 1.00E2 DATE TITLE SOFTWARE VALIDATION TEST S'NCOR RADIATION MANAGEMENT PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION 04%*(0 143 of 246 PLN

4.3.3.34.20 Select position I on data entrylfufiction switch (Wam Set point) and press ENTER pushbutton.

4.3.3.34.21 Value displayed is equal to 1.OOEO 4.3.3.34.21.1 Enter pass/fail in result on Test Log 4.3.3.34.22 Left most digit is flashing 4.3.3.34.22.1 Enter pass/fail in result on Test Log 4.3.3.34.23 Change set point to 2.90E2 (above High Alarm Set Point) 4.3.3.34.24 Value displayed on front panel is 2.90E2 4.3.3.34.24.1 Enter pass/fail in result on Test Log 4.3.3.34.25 Press ENTER pushbutton to exit data entry mode 4.3.3.34.26 Value displayed on front panel is .900 mR/h 4.3.3.34.26.1 Enter pass/fail in result on Test Log 4.3.3.34.26.2 Check source indicator is off 4.3.3.34.26.2.1 Enter pass/fail in result on Test Log 4.3.3.34.26.3 HIGH alarm indicator is off 4.3.3.34.26.3.1 Enter pass/fail in result on Test Log 4.3.3.34.26.4 HIGH alarm relay is energized 4.3.3.34.26.4.1 Enter pass/fail in result on Test Log 4.3.3.34.26.5 Auxiliary output is energized 4.3.3.34.26.5.1 Enter pass/fail in result on Test Log 4.3.3.34.26.6 WARN alarm indicator is off 4.3.3.34.26.6.1 Enter pass/fail in result on Test Log 4.3.3.34.26.7 WARN alarm relay is energized 4.3.3.34.26.7.1 Enter pass/fail in result on Test Log 4.3.3.34.26.8 Fail indicator is off 4.3.3.34.26.8.1 Enter pass/fail in result on Test Log 4.3.3.34.26.9 Fail relay is energized 4.3.3.34.26.9.1 Enter pass/fail in result on Test Log 4.3.3.34.26.10 Range indicator is off 4.3.3.34.26.10.1 Enter pass/fail in result on Test Log

-4.3.3.34.26.1IBargraph is green -

4.3.3.34.26.11.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT o10r"02 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION Ob.W- 144 of 246 PLN

4.3.3.34.26.12 Bargraph has 6 segments lit 4.3.3.34.26.12.1 Enter pass/fail in result on Test Log 4.3.3.34.26.13 Backlight is on mR/h 4.3.3.34.26.13.1 Enter pass/fail in result on Test Log 4.3.3.34.26.14 Radiation value displayed on front panel is .900 mR/h 4.3.3.34.26.14.1 Enter pass/fail in result on Test Log 4.3.3.34.26.15 Analog output I (4-2OmA) is 10.25 ma 4.3.3.34.26.15.1 Enter pass/fail in result on Test Log 4.3.3.34.26.16 Analog output 2 (4-20mA) is 10.25 ma 4.3.3.34.26.16.1 Enter pass/fail in result on Test Log 4.3.3.34.26.17 Analog output 3 (0-10Vdc) is 3.91 4.3.3.34.26.17.1 Enter pass/fail in result on Test Log 4.3.3.34.27 Press ENTER pushbutton to re-enter data entry mode 4.3.3.34.28 Left most digit is flashing 4.3.3.34.28.1 Enter pass/fail in result on Test Log 4.3.3.34.29 Value displayed on front panel remains at 1.OOEO (Invalid set point not accepted) 4.3.3.34.29.1 Enter pass/fail in result on Test Log 4.3.3.34.30 Change set point to 2.00-1 4.3.3.34.31- Value displayed on front panel-is 2.00-1 4.3.3.34.31.1 Enter pass/fail in result on Test Log 4.3.3.34.32 Press ENTER pushbutton to exit data entry mode 4.3.3.34.32.1 Check source indicator is off 4.3.3.34.32.1.1 Enter pass/fail in result on Test Log 4.3.3.34.32.2 HIGH alarm indicator is off 4.3.3.34.32.2.1 Enter pass/fail in result on Test Log 4.3.3.34.32.3 HIGH alarm relay is energized 4.3.3.34.32.3.1 Enter pass/fail in result on Test Log 4.3.3.34.32.4 Auxiliary output is energized 4.3.3.34.32.4.1 Enter pass/fail in result on Test Log 4.3.3.34.32,5-WARN-alarm indicator is flashing 4.3.3.34.32.5.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNcOR RADIATION MANAGEMENT PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION ,,W(M 145 of 246 PLN

4.3.3.34.32.6 WARN alarm relay is de-energized 4.3.3.34.32.6.1 Enter pass/fail in resUlt on Test Log 4.3.3.34.32.7 Fail indicator is off 4.3.3.34.32.7.1 Enter pass/fail in result on Test Log 4.3.3.34.32.8 Fail relay is energized 4.3.3.34.32.8.1 Enter pass/fail in result on Test Log 4.3.3.34.32.9 Range indicator is off 4.3.3.34.32.9.1 Enter pass/fail in result on Test Log 4.3.3.34.32.10 Bargraph is amber 4.3.3.34.32.10.1 Enter pass/fail in result on Test Log 4.3.3.34.32.11 Bargraph has 6 segments lit 4.3.3.34.32.11.1 Enter pass/fail in result on Test Log 4.3.3.34.32.12 Backlight is on mR/h 4.3.3.34.32.12.1 Enter pass/fail in result on Test Log 4.3.3.34.32.13 Radiation value displayed on front panel is .900 mR/h 4.3.3.34.32.13.1 Enter pass/fail in result on Test Log 4.3.3.34.32.14Analog output I (4-20mA) is 10.25 ma 4.3.3.34.32.14.1 Enter pass/fail in result on Test Log 4.3.3.34.32.15Analog output 2 (4-20mA) is 10.25 ma 4.3.3.34.32.15.1 Enter pass/fail in result on Test Log 4.3.3.34.32.16 Analog output 3 (0-10Vdc) is 3.91 4.3.3.34.32.16.1 Enter pass/fail in result on Test Log 4.3.3.34.33 Press WARN pushbutton 4.3.3.34.34 Value displayed on front panel is 2.00-1 4.3.3.34.34.1 Enter pass/fail in result on Test Log 4.3.3.34.35 Press the ENTER pushbutton 4.3.3.34.36 Left most digit is flashing 4.3.3.34.36.1 Enter pass/fail in result on Test Log 4.3.3.34.37 Value displayed on front panel is 2.00-1 4.3.3.34.37.1 Enter pass/fail in result on Test Log 4.3.3.34.38 Return set point I to 1.OOEO 4.3.3.34.39 --- Press-Acknbwledge-pushbutton to clear WARN alarm 4.3.3.34.39.1 Check source indicator is off 4.3.3.34.39.1.1 Enter pass/fail in result on Test Log DATE 1 U23/02 TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT I2 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION rfa'ym 146 of 246 PLN

4.3.3.34.39.2 HIGH alarm indicator is off 4.3.3.34.39.2.1 Enter pass/fail in result on Test Log 4.3.3.34.39.3 HIGH alarm relay is energized 4.3.3.34.39.3.1 Enter pass/fail in result on Test Log 4.3.3.34.39.4 Auxiliary output is energized 4.3.3.34.39.4.1 Enter pass/fail in result on Test Log 4.3.3.34.39.5 WARN alarm indicator is off 4.3.3.34.39.5.1 Enter pass/fail in result on Test Log 4.3.3.34.39.6 WARN alarm relay is energized 4.3.3.34.39.6.1 Enter pass/fail in result on Test Log 4.3.3.34.39.7 Fail indicator is off 4.3.3.34.39.7.1 Enter pass/fail in result on Test Log 4.3.3.34.39.8 Fail relay is energized 4.3.3.34.39.8.1 Enter pass/fail in result on Test Log 4.3.3.34.39.9 Range indicator is off 4.3.3.34.39.9.1 Enter pass/fail in result on Test Log 4.3.3.34.39.10 Bargraph is green 4.3.3.34.39.10.1 Enter pass/fail in result on Test Log 4.3.3.34.39.1:1 Bargraph has6 segments lit 4.3.3.34.39.11.1 Enter pass/fail in result on Test Log 4.3.3.34.39.12 Backlight is on mR/h 4.3.3.34.39.12.1 Enter pass/fail in result on Test Log 4.3.3.34.39.13 Radiation value displayed on front panel is .900 mR/h 4.3.3.34.39.13.1 Enter pass/fail in result on Test Log 4.3.3.34.39.14 Analog output I (4-20mA) is 10.25 ma 4.3.3.34.39.14.1 Enter pass/fail in result on Test Log 4.3.3.34.39.15 Analog output 2 (4-20mA) is 10.25 ma 4.3.3.34.39.15.1 Enter pass/fail in result on Test Log 4.3.3.34.39.16Analog output 3 (0-10Vdc) is 3.91 4.3.3.34.39.16.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST

-SYNcOR RADIATION MANAGEMENT -1/23102 PROCEDURE,9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO,[ SIZE 1 3076 PRODUCTION 1 147 of 246 PLN

4.3.3.34.40 Select position 2 on data entry/function switch (Dead Time) and press ENTER pushbutton.

4.3.3.34.41 Value displayed is equal to 0.OOEO 4.3.3.34.41.1 Enter pass/fail in result on Test Log 4.3.3.34.42 Left most digit is flashing 4.3.3.34.42.1 Enter pass/fail in result on Test Log 4.3.3.34.43 Change set point to 1.67-8 4.3.3.34.44 Value displayed on front panel is 1.67-8 4.3.3.34.44.1 Enter pass/fail in result on Test Log 4.3.3.34.45 Press ENTER pushbutton to exit data entry mode 4.3.3.34.46 Value displayed on front panel is .900 mR/h 4.3.3.34.46.1 Enter pass/fail in result on Test Log 4.3.3.34.46.2 Check source indicator is off 4.3.3.34.46.2.1 Enter pass/fail in result on Test Log 4.3.3.34.46.3 HIGH alarm indicator is off 4.3.3.34.46.3.1 Enter pass/fail in result on Test Log 4.3.3.34.46.4 HIGH alarm relay is energized 4.3.3.34.46.4.1 Enter pass/fail in result on Test Log 4.3.3.34.46.5 Auxiliary output is energized 4.3.3.34.46.5.1 Enter pass/fail in result on Test Log 4.3.3.34.46.6 WARN alarm indicator is off 4.3.3.34.46.6.1 Enter pass/fail in result on Test Log 4.3.3.34.46.7 WARN alarm relay is energized 4.3.3.34.46.7.1 Enter pass/fail in result on Test Log 4.3.3.34.46.8 Fail indicator is off 4.3.3.34.46.8.1 Enter pass/fail in result on Test Log 4.3.3.34.46.9 Fail relay is energized 4.3.3.34.46.9.1 Enter pass/fail in result on Test Log 4.3.3.34.46.10 Range indicator is off 4.3.3.34.46.10.1 Enter pass/fail in result on Test Log 4.3.3.34.46.11 Bargraph is green 4-.3.3.34A6_ 111- Eiter p-t-passfailin-reult 6n Tst Log 4.3.3.34.46.12 Bargraph has 6 segments lit 4.3.3.34.46.12.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 1-23/02 -PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. 9PSIZE 1 3076 PRODUCTION galwf 148 of 246 PLN

4.3.3.34.46.13 Backlight is on mR/h 4.3.3.34.46.13.1 Enter pass/fail in result on Test Log 4.3.3.34.46.14 Radiation value displayed on front panel is .900 mR/h 4.3.3.34.46.14.1 Enter pass/fail in result on Test Log 4.3.3.34.46.15 Analog output 1 (4-20mA) is 10.25 ma 4.3.3.34.46.15.1 Enter pass/fail in result on Test Log 4.3.3.34.46.16 Analog output 2 (4-2OmA) is 10.25 ma 4.3.3.34.46.16.1 Enter pass/fail in result on Test Log 4.3.3.34.46.17 Analog output 3 (0-10Vdc) is 3.91 4.3.3.34.46.17.1 Enter pass/fail in result on Test Log 4.3.3.34.47 Press ENTER pushbutton to enter data mode 4.3.3.34.48 Value displayed on front panel is 1.67-8 4.3.3.34.48.1 Enter pass/fail in result on Test Log 4.3.3.34.49 Left most digit is flashing 4.3.3.34.49.1 Enter pass/fail in result on Test Log 4.3.3.34.50 Change set point 2 to O.OOEO (change back original value) 4.3.3.34.51 Value displayed on front panel is 0.OOEO 4.3.3.34.51.1 Enter pass/fail in result on Test Log 4.3.3.34.52 Press ENTER pushbutton to exit data entry mode 4.3.3.34.53 Press ENTER pus-hIbutton to re-enter data entry mode to verify set point entry 4.3.3.34.53.1 Value displayed on front panel is O.OOEO 4.3.3.34.54 Press ENTER pushbutton to exit data entry mode 4.3.3.34.54.1 Value displayed on front panel is O.OOEO 4.3.3.34.54.2 Enter pass/fail in result on Test Log 4.3.3.34.54.3 Check source indicator is off 4.3.3.34.54.3.1 Enter pass/fail in result on Test Log 4.3.3.34.54.4 HIGH alarm indicator is off 4.3.3.34.54.4.1 Enter pass/fail in result on Test Log 4.3.3.34.54.5 HIGH alarm relay is energized 4.3.3.34.54.5.1--Enter-pass/fail in-result on Test Log 4.3.3.34.54.6 Auxiliary output is energized 4.3.3.34.54.6.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCORRADIATION MANAGEMENT - _10/23/02 - - - PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. TSIZE 1 3076 PRODUCTION .041W( 149 of 246 101 PLN

4.3.3.34.54.7 WARN alarm indicator is off 4.3.3.34.54.7.1 Enter pass/fail in result on Test Log 4.3.3.34.54.8 WARN alarm relay is energized 4.3.3.34.54.8.1 Enter pass/fail in result on Test Log 4.3.3.34.54.9 Fail indicator is off 4.3.3.34.54.9.1 Enter pass/fail in result on Test Log 4.3.3.34.54.10 Fail relay is energized 4.3.3.34.54.10.1 Enter pass/fail in result on Test Log 4.3.3.34.54.11 Range indicator is off 4.3.3.34.54.11.1 Enter pass/fail in result on Test Log 4.3.3.34.54.12 Bargraph is green 4.3.3.34.54.12.1 Enter pass/fail in result on Test Log 4.3.3.34.54.13 Bargraph has 6 segments lit 4.3.3.34.54.13.1 Enter pass/fail in result on Test Log 4.3.3.34.54.14 Backlight is on mR/h 4.3.3.34.54.14.1 Enter pass/fail in result on Test Log 4.3.3.34.54.15 Radiation value displayed on front panel is .900 mR/h 4.3.3.34.54.15.1 Enter pass/fail in result on Test Log 4.3.3.34.54.16Analog output I (4-20mA) is 10.25 ma 4.3.3.34.54.16.1 Enter pass/fail in result on Test Log 4.3.3.34.54.17Analog output 2 (4-20mA) is 10.25 ma 4.3.3.34.54.17.1 Enter pass/fail in result on Test Log 4.3.3.34.54.18 Analog output 3 (0-10Vdc) is 3.91 4.3.3.34.54.18.1 Enter pass/fail in result on Test Log 4.3.3.34.55 Select position 3 on data entry/function switch (Analog Full Scale) and press ENTER pushbutton.

4.3.3.34.56 Value displayed is equal to 1.00E3 4.3.3.34.56.1 Enter pass/fail in result on Test Log 4.3.3.34.57 Left most digit is flashing 4.3.3.34.57.1 Enter pass/fail in result on Test Log 4.3.3.34.58 Change-set point to 2.89E4 4.3.3.34.59 Value displayed on front panel is 2.89E4 4.3.3.34.59.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT Io3Io2 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION ,AfYm_ 150 of 246 PLN

4.3.3.34.60 Press ENTER pushbutton to exit data entry mode 4.3.3.34.61 Value displayed on front panel is .900 mR/h 4.3.3.34.61.1 Enter pass/fail in result on Test Log 4.3.3.34.61.2 Check source indicator is off 4.3.3.34.61.2.1 Enter pass/fail in result on Test Log 4.3.3.34.61.3 HIGH alarm indicator is off 4.3.3.34.61.3.1 Enter pass/fail in result on Test Log 4.3.3.34.61.4 HIGH alarm relay is energized 4.3.3.34.61.4.1 Enter pass/fail in result on Test Log 4.3.3.34.61.5 Auxiliary output is energized 4.3.3.34.61.5.1 Enter pass/fail in result on Test Log 4.3.3.34.61.6 WARN alarm indicator is off 4.3.3.34.61.6.1 Enter pass/fail in result on Test Log 4.3.3.34.61.7 WARN alarm relay is energized 4.3.3.34.61.7.1 Enter pass/fail in result on Test Log 4.3.3.34.61.8 Fail indicator is off 4.3.3.34.61.8.1 Enter pass/fail in result on Test Log 4.3.3.34.61.9 Fail relay is energized 4.3.3.34.61.9.1 Enter pass/fail in result on Test Log 4.3.3.34.61.10 Range indicator is off 4.3.3.34.61.10.1 Enter pass/fail in result on Test Log 4.3.3.34.61.11 Bargraph is green 4.3.3.34.61.11.1 Enter pass/fail in result on Test Log 4.3.3.34.61.12 Bargraph has 6 segments lit 4.3.3.34.61.12.1 Enter pass/fail in result on Test Log 4.3.3.34.61.13 Backlight is on mR/h 4.3.3.34.61.13.1 Enter pass/fail in result on Test Log 4.3.3.34.61.14 Radiation value displayed on front panel is .900 mR/h 4.3.3.34.61.14.1 Enter pass/fail in result on Test Log 4.3.3.34.61.15Analog output 1 (4-2OmA) is 10.25 ma 4.3.3.34.61.15.1 Enter pass/fail in result on Test Log 4.3.3.34.61.16 Analog output 2 (4-20mA) is 10.25 ma 4.3.3.34.61.16.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT .... PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION ,ollw' 151 of 246 PLN

4.3.3.34.61.17Analog output 3 (0-1OVdc) is 3.91 4.3.3.34.61.17.1 Enter pass/fail in result on Test Log 4.3.3.34.62 Press ENTER pushbutton to re-enter data entry mode 4.3.3.34.63 Value displayed on front panel is 1.00E3 (invalid set point not accepted) 4.3.3.34.63.1 Enter pass/fail in result on Test Log 4.3.3.34.64 Press ENTER pushbutton to exit data entry mode 4.3.3.34.65 Select position 4 on data entry/function switch (Over Range) and press ENTER pushbutton.

4.3.3.34.66 Value displayed is equal to 1.00E3 4.3.3.34.66.1 Enter pass/fail in result on Test Log 4.3.3.34.67 Press ENTER pushbutton.

4.3.3.34.68 Left most digit is flashing 4.3.3.34.68.1 Enter pass/fail in result on Test Log 4.3.3.34.69 Change set point to 1.00-1 4.3.3.34.70 Value displayed on front panel is 1.00-1 4.3.3.34.70.1 Enter pass/fail in result on Test Log 4.3.3.34.71 Press ENTER pushbutton to exit data entry mode 4.3.3.34.71.1 Check source indicator is off 4.3.3.34.71.1.1 Enter pass/fail in result on Test Log 4.3.3.34.71.2 HIGH alarm indicator is off 4.3.3.34.71.2.1 Enter pass/fail in result on Test Log 4.3.3.34.71.3 HIGH alarm relay is energized 4.3.3.34.71.3.1 Enter pass/fail in result on Test Log 4.3.3.34.71.4 Auxiliary output is energized 4.3.3.34.71.4.1 Enter pass/fail in result on Test Log 4.3.3.34.71.5 --WARN alarm indicator is off 4.3.3.34.71.5.1 Enter pass/fail in result on Test Log 4.3.3.34.71.6 WARN alarm relay is energized 4.3.3.34.71.6.1 Enter pass/fail in result on Test Log 4.3.3.34.71.7 Fail indicator is off 4.3.3.34.71.7.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION 9?,.'iNf 152 of 246 PLN

4.3.3.34.71.8 Fail relay is energized 4.3.3.34.71.8.1 Enter pass/fail in result on Test Log 4.3.3.34.71.9 Range indicator is off 4.3.3.34.71.9.1 Enter pass/fail in result on Test Log 4.3.3.34.71.10 Bargraph is green 4.3.3.34.71.10.1 Enter pass/fail in result on Test Log 4.3.3.34.71.11 Bargraph has 6 segments lit 4.3.3.34.71.11.1 Enter pass/fail in result on Test Log 4.3.3.34.71.12 Backlight is on mR/h 4.3.3.34.71.12.1 Enter pass/fail in result on Test Log 4.3.3.34.71.13 Radiation value displayed on front panel is .900 mR/h 4.3.3.34.71.13.1 Enter pass/fail in result on Test Log 4.3.3.34.71.14 Analog output I (4-2OmA) is 10.25 ma 4.3.3.34.71.14.1 Enter pass/fail in result on Test Log 4.3.3.34.71.15Analog output 2 (4-2OmA) is 10.25 ma 4.3.3.34.71.15.1 Enter pass/fail in result on Test Log 4.3.3.34.71.16 Analog output 3 (0-10Vdc) is 3.91 4.3.3.34.71.16.1 Enter pass/fail in result on Test Log 4.3.3.34.72 Press ENTER pushbutton to re-enter data entry mode 4.3.3.34.73 Value displayed -orr-front panel remains 1.00E3 (entry of invalid set -.

point permitted) 4.3.3.34.73.1 Enter pass/fail in result on Test Log 4.3.3.34.74 Press ENTER pushbutton to exit data entry mode 4.3.3.34.75 Select position 5 on data entry/function switch (Conversion Constant) and press ENTER pushbutton.

4.3.3.34.76 Value displayed is equal to 1.00-3 4.3.3.34.76.1 Enter pass/fail in result on Test Log 4.3.3.34.77--Left most digit is flashing 4.3.3.34.77.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNcOR RADIATION MANAGEMENT I o23/02 PROCEDURE.9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION ,*,*(' 153 of 246 1 PLN

4.3.3.34.78 Change set point to 1.00-2 4.3.3.34.79 Value displayed on front panel is 1.00-2 4.3.3.34.79.1 Enter pass/fail in result on Test Log 4.3.3.34.80 Press ENTER pushbutton to exit data entry mode 4.3.3.34.81 Value displayed on front panel is 9.00 mR/h, which will trip the WARN alarm 4.3.3.34.81.1 Enter pass/fail in result on Test Log 4.3.3.34.81.2 Check source indicator is off 4.3.3.34.81.2.1 Enter pass/fail in result on Test Log 4.3.3.34.81.3 HIGH alarm indicator is off 4.3.3.34.81.3.1 Enter pass/fail in result on Test Log 4.3.3.34.81.4 HIGH alarm relay is energized 4.3.3.34.81.4.1 Enter pass/fail in result on Test Log 4.3.3.34.81.5 Auxiliary output is energized 4.3.3.34.81.5.1 Enter pass/fail in result on Test Log 4.3.3.34.81.6 WARN alarm indicator is flashing 4.3.3.34.81.6.1 Enter pass/fail in result on Test Log 4.3.3.34.81.7 WARN alarm relay is de-energized 4.3.3.34.81.7.1 Enter pass/fail in result on Test Log 4.3.3.34.81.8 Fail indicator is off 4.3.3.34.81.8.1 Enter pass/fail in result on Test Log 4.3.3.34.81.9 Fail relay is energized 4.3.3.34.81.9.1 Enter pass/fail in result on Test Log 4.3.3.34.81.10 Range indicator is off 4.3.3.34.81.10.1 Enter pass/fail in result on Test Log 4.3.3.34.81.11 Bargraph is amber 4.3.3.34.81.11.1 Enter pass/fail in result on Test Log 4.3.3.34.81.12 Bargraph has 9 segments lit 4.3.3.34.81.12.1 Enter pass/fail in result on Test Log 4.3.3.34.81.13 Backlight is on mR/h 4.3.3.34.81.13.1 Enter pass/fail in result on Test Log

-4.3.3.34.81.14 Radidtion Value displaVed on front panel is 9.00 mR/h 4.3.3.34.81.14.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST

-SYNcoRRADIATION MANAGEMENT -- I =3M2 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION 9Z*'f 154 of 246 PLN

4.3.3.34.81.15 Analog output 1 (4-2OmA) is 13.45 ma 4.3.3.34.81.15.1 Enter pass/fail in result on Test Log 4.3.3.34.81.16 Analog output 2 (4-2OmA) is 13.45 ma 4.3.3.34.81.16.1 Enter pass/fail in result on Test Log 4.3.3.34.81.17Analog output 3 (0-10Vdc) is 5.91 4.3.3.34.81.18 Enter pass/fail in result on Test Log 4.3.3.34.82 Press Acknowledge pushbutton to acknowledge WARN alarm 4.3.3.34.83 Press ENTER pushbutton to re-enter data entry mode 4.3.3.34.84 Value displayed on front panel is 1.00-2 4.3.3.34.85 Left most digit is flashing 4.3.3.34.85.1 Enter pass/fail in result on Test Log 4.3.3.34.86 Change set point back to 1.00-3 4.3.3.34.86.1 Enter pass/fail in result on Test Log 4.3.3.34.87 Press ENTER pushbutton to exit data entry mode 4.3.3.34.87.1 Check source indicator is off 4.3.3.34.87.1.1 Enter pass/fail in result on Test Log 4.3.3.34.87.2 HIGH alarm indicator is off 4.3.3.34.87.2.1 Enter pass/fail in result on Test Log 4.3.3.34.87.3 HIGH alarm relay is energized

- -, - "4.3.3.34.87.3.1A *Enter-pass/failin-result on Test-Log 4.3.3.34.87.4 Auxiliary output is energized 4.3.3.34.87.4.1 Enter pass/fail in result on Test Log 4.3.3.34.87.5 WARN alarm indicator is off 4.3.3.34.87.5.1 Enter pass/fail in result on Test Log 4.3.3.34.87.6 WARN alarm relay is energized 4.3.3.34.87.6.1 Enter pass/fail in result on Test Log 4.3.3.34.87.7 Fail indicator is off 4.3.3.34.87.7.1 Enter pass/fail in result on Test Log 4.3.3.34.87.8 Fail relay is energized 4.3.3.34.87.8.1 Enter pass/fail in result on Test Log 4.3.334:87:9-Range-indicator is off 4.3.3.34.87.9.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST

-SYNCORRADIATION MANAGEMENT 1o/231o2 PROCEDUREV 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION I &?,£Y,41 155 of 246 94095 6 0 VTP 3 J PLN

4.3.3.34.87.10 Bargraph is green 4.3.3.34.87.10.1 Enter pass/fail in result on Test Log 4.3.3.34.87.11 Bargraph has 6 segments lit 4.3.3.34.87.11.1 Enter pass/fail in result on Test Log 4.3.3.34.87.12 Backlight is on mR/h 4.3.3.34.87.12.1 Enter pass/fail in result on Test Log 4.3.3.34.87.13 Radiation value displayed on front panel is .900 mR/h 4.3.3.34.87.13.1 Enter pass/fail in result on Test Log 4.3.3.34.87.14 Analog output I (4-2OmA) is 10.25 ma 4.3.3.34.87.14.1 Enter pass/fail in result on Test Log 4.3.3.34.87.15 Analog output 2 (4-20mA) is 10.25 ma 4.3.3.34.87.15.1 Enter pass/fail in result on Test Log 4.3.3.34.87.16 Analog output 3 (0-10Vdc) is 3.91 4.3.3.34.87.16.1 Enter pass/fail in result on Test Log 4.3.3.34.88 Press ENTER pushbutton to re-enter data entry mode to verify the set point was changed 4.3.3.34.89 Value displayed on front panel is 1.00-3 4.3.3.34.89.1 Enter pass/fail in result on Test Log 4.3.3.34.90 Press ENTER pushbutton to exit data entry mode 4.3.3.34.91 Select position 7 on data entry/function switch (Analog Low Scale) and press ENTER pushbutton.

4.3.3.34.92 Value displayed is equal to 1.00-2 4.3.3.34.92.1 Enter pass/fail in result on Test Log 4.3.3.34.93 Left most digit is flashing 4.3.3.34.93.1 Enter pass/fail in result on Test Log 4.3.3.34.94 Change set point to 1.90E4 4.3.3.34.95 Value displayed on front panel is 1.90E4 4.3.3.34.95.1 Enter pass/fail in result on Test Log 4.3.3.34.96-Press-ENTER pushbutton to exit data entry mode 4.3.3.34.97 Value displayed on front panel is .900 mR/h 4.3.3.34.97.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST ION MANAGEMENT PROCEDURE, 9405603 I

,ELEASEDFOR DOC CTRL SHEET NO. 90_.V PRODUCTION alYw1 156 of 246 PLN

4.3.3.34.97.2 Check source indicator is off 4.3.3.34.97.2.1 Enter pass/fail in result on Test Log 4.3.3.34.97.3 HIGH alarm indicator is off 4.3.3.34.97.3.1 Enter pass/fail in result on Test Log 4.3.3.34.97.4 HIGH alarm relay is energized 4.3.3.34.97.4.1 Enter pass/fail in result on Test Log 4.3.3.34.97.5 Auxiliary output is energized 4.3.3.34.97.5.1 Enter pass/fail in result on Test Log 4.3.3.34.97.6 WARN alarm indicator is off 4.3.3.34.97.6.1 Enter pass/fail in result on Test Log 4.3.3.34.97.7 WARN alarm relay is energized 4.3.3.34.97.7.1 Enter pass/fail in result on Test Log 4.3.3.34.97.8 Fail indicator is off 4.3.3.34.97.8.1 Enter pass/fail in result on Test Log 4.3.3.34.97.9 Fail relay is energized 4.3.3.34.97.9.1 Enter pass/fail in result on Test Log 4.3.3.34.97.10 Range indicator is off 4.3.3.34.97.10.1 Enter pass/fail in result on Test Log 4.3.3.34.97.11 Bargraph is green 4.3.3.34.97.11.1 Enter pass/fail in result on Test Log 4.3.3.34.97.12 Bargraph has 6 segments lit 4.3.3.34.97.12.1 Enter pass/fail in result on Test Log 4.3.3.34.97.13 Backlight is on mR/h 4.3.3.34.97.13.1 Enter pass/fail in result on Test Log 4.3.3.34.97.14 Radiation value displayed on front panel is .900 mR/h 4.3.3.34.97.14.1 Enter pass/fail in result on Test Log 4.3.3.34.97.15Analog output I (4-2OmA) is 10.25 ma 4.3.3.34.97.15.1 Enter pass/fail in result on Test Log 4.3.3.34.97.16 Analog output 2 (4-2OmA) is 10.25 ma 4.3.3.34.97.16.1 Enter pass/fail in result on Test Log 4.3.3.34.97.17 Analog output 3 (0-10Vdc) is 3.91 4-.3.34.97.17.1--Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCORRADIATION MANAGEMENT I _ ---PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. S1E 1 3076 PRODUCTION , 157 of 246 PLN

4.3.3.34.98 Press ENTER pushbutton to enter data entry mode 4.3.3.34.99 Value displayed on front panel remains 1.00E-2 (invalid set point not accepted) 4.3.3.34.99.1 Enter pass/fail in result on Test Log 4.3.3.34.100 Press ENTER pushbutton to exit data entry mode 4.3.3.34.101 Select position 8 on data entry/function switch (Calibration Mode/Time) and press ENTER pushbutton.

4.3.3.34.102 Value displayed is equal to 6.OOE1 4.3.3.34.102.1 Enter pass/fail in result on Test Log 4.3.3.34.103 Left most digit is flashing 4.3.3.34.103.1 Enter pass/fail in result on Test Log 4.3.3.34.104 Change set point to 3.OOE1 4.3.3.34.105 Value displayed on front panel is 3.OOE1 4.3.3.34.105.1 Enter pass/fail in result on Test Log 4.3.3.34.106 Press ENTER pushbutton to start calibrate timer 4.3.3.34.107 All three backlights, mR/h, R/h and kR/h are flashing 4.3.3.34.108 Value displayed on front panel is 0.00, and begins incrementing each second 4.3.3:34.108.-1-Enter pass/fail in result-on -Test-Log .

4.3.3.34.108.2 Check source indicator is off 4.3.3.34.108.2.1 Enter pass/fail in result on Test Log 4.3.3.34.108.3 HIGH alarm indicator is off 4.3.3.34.108.3.1 Enter pass/fail in result on Test Log 4.3.3.34.108.4 HIGH alarm relay is de-energized 4.3.3.34.108.4.1 Enter pass/fail in result on Test Log 4.3.3.34.108.5 Auxiliary output is de-energized 4.3.3.34.108.5.1 Enter pass/fail in result on Test Log 4.3.3.34.108.6 WARN alarm indicator is off 4.3.3.34.108.6.1 Enter pass/fail in result on Test Log 4.3.3,34.1087 WARN-alarmTelayis-de-energized --

4.3.3.34.108.7.1 Enter pass/fail in result on Test Log 4.3.3.34.108.8 Fail indicator is on 4.3.3.34.108.8.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION 9Z'%e( 158 of 246 PLN

4.3.3.34.108.9 Fail relay is de-energized 4.3.3.34.108.9.1 Enter pass/fail in result on Test Log 4.3.3.34.108.10 Range indicator is off 4.3.3.34.108.10.1 Enter pass/fail in result on Test Log 4.3.3.34.108.11 Bargraph is off 4.3.3.34.108.11.1 Enter pass/fail in result on Test Log 4.3.3.34.108.12 Bargraph has no segments lit 4.3.3.34.108.12.1 Enter pass/fail in result on Test Log 4.3.3.34.108.13 Backlights are all on, flashing 4.3.3.34.108.13.1 Enter pass/fail in result on Test Log 4.3.3.34.108.14 Radiation value displayed on front panel increases each second 4.3.3.34.108.14.1 Enter pass/fail in result on Test Log 4.3.3.34.108.15 Analog output I (4-20mA) is 10.25 ma 4.3.3.34.108.15.1 Enter pass/fail in result on Test Log 4.3.3.34.108.16 Analog output 2 (4-20mA) is 10.25 ma 4.3.3.34.108.16.1 Enter pass/fail in result on Test Log 4.3.3.34.108.17 Analog output 3 (0-10Vdc) is 3.91 4.3.3.34.108.17.1 Enter pass/fail in result on Test Log 4.3.3.34.109 After 30 seconds, timer stops 4.3.3.34.109.1 Check source indicator is off 4.3.3.34.109.1.1 Enter pass/fail in result on Test Log 4.3.3.34.109.2 HIGH alarm indicator is off 4.3.3.34.109.2.1 Enter pass/fail in result on Test Log 4.3.3.34.109.3 HIGH alarm relay is de-energized 4.3.3.34.109.3.1 Enter pass/fail in result on Test Log 4.3.3.34.109.4 Auxiliary output is de-energized 4.3.3.34.109.4.1 Enter pass/fail in result on Test Log

-4.3;3.341 09.5 WARN-alarm indicator is off .

4.3.3.34.109.5.1 Enter pass/fail in result on Test Log DATE TFTLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. TSIZE 1 3076 PRODUCTION 4.Y,*' 159 of 246 PLN

4.3.3.34.109.6 WARN alarm relay is de-energized 4.3.3.34.109.6.1 Enter pass/fail in result on Test Log 4.3.3.34.109.7 Fail indicator is on 4.3.3.34.109.7.1 Enter pass/fail in result on Test Log 4.3.3.34.109.8 Fail relay is de-energized 4.3.3.34.109.8.1 Enter pass/fail in result on Test Log 4.3.3.34.109.9 Range indicator is off 4.3.3.34.109.9.1 Enter pass/fail in result on Test Log 4.3.3.34.109.10 Bargraph is off 4.3.3.34.109.10.1 Enter pass/fail in result on Test Log 4.3.3.34.109.11 Bargraph has no segments lit 4.3.3.34.109.11.1 Enter pass/fail in result on Test Log 4.3.3.34.109.12 Backlights are all off 4.3.3.34.109.12.1 Enter pass/fail in result on Test Log 4.3.3.34.109.13 Radiation value displayed is 4.50E2 4.3.3.34.109.13.1 Enter pass/fail in result on Test Log 4.3.3.34.109.14 Analog output I (4-2OmA) is 10.25 ma 4.3.3.34.109.14.1 Enter pass/fail in result on Test Log 4.3.3.34.109.15 Analog output 2 (4-20mA) is 10.25 ma

- -4.3.3.34.109.151 :Enter pass/fail in-result on Test Log 4.3.3.34.109.16 Analog output 3 (0-10Vdc) is 3.91 4.3.3.34.109.16.1 Enter pass/fail in result on Test Log 4.3.3.34.110 Rotate function switch to position 9 to exit calibration mode 4.3.3.34.111 Select position 9 on data entry/function switch (Under Range) and press ENTER pushbutton.

4.3.3.34.112 Value displayed is equal to 1.00-2 4.3.3.34.112.1 Enter pass/fail in result on Test Log

- 4.3.3.34.-113 -Left most digit is flashing 4.3.3.34.113.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VAUDATION TEST SYNCOR-RADIATION MANAGEMENT 13/2PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION I 9bW't1 160 of 246 94095603VTP P LN

4.3.3.34.114 Change set point to 3.00-1 4.3.3.34.115 Value displayed on front panel is 3.00-1 4.3.3.34.115.1 Enter pass/fail in result on Test Log 4.3.3.34.116 Press ENTER pushbutton to exit data entry mode 4.3.3.34.117 Value displayed on front panel is .900 mR/h 4.3.3.34.117.1 Enter pass/fail in result on Test Log 4.3.3.34.117.2 Check source indicator is off 4.3.3.34.117.2.1 Enter pass/fail in result on Test Log 4.3.3.34.117.3 HIGH alarm indicator is off 4.3.3.34.117.3.1 Enter pass/fail in result on Test Log 4.3.3.34.117.4 HIGH alarm relay is energized 4.3.3.34.117.4.1 Enter pass/fail in result on Test Log 4.3.3.34.117.5 Auxiliary output is energized 4.3.3.34.117.5.1 Enter pass/fail in result on Test Log 4.3.3.34.117.6 WARN alarm indicator is off 4.3.3.34.117.6.1 Enter pass/fail in result on Test Log 4.3.3.34.117.7 WARN alarm relay is energized 4.3.3.34.117.7.1 Enter pass/fail in result on Test Log 4.3.3.34.117.8 Fail indicator is off 4.3.3.34.117.8.1 Enter pass/fail in result on Test Log 4.3.3.34.117.9 Fail relay is energized 4.3.3.34.117.9.1 Enter pass/fail in result on Test Log 4.3.3.34.117.10 Range indicator is off 4.3.3.34.117.10.1 Enter pass/fail in result on Test Log 4.3.3.34.117.11 Bargraph is on, green 4.3.3.34.117.11.1 Enter pass/fail in result on Test Log 4.3.3.34.117.12 Bargraph has 6 segments lit 4.3.3.34.117.12.1 Enter pass/fail in result on Test Log 4.3.3.34.117.13 Backlight is on, mR/h 4.3.3.34.117.13.1 Enter pass/fail in result on Test Log 4.3.3.34.117.14 Radiation value displayed is .900 mR/h 4.3.3.134.117.214.1 Enter pass-fail in result on Test Log 4.3.3.34.117.15 Analog output 1 (4-20mA) is 10.25 ma 4.3.3.34.117.15.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT I 12302 - PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION 9?..,( 161 of 246 PLN

4.3.3.34.117.16 Analog output 2 (4-2OmA) is 10.25 ma 4.3.3.34.117.16.1 Enter pass/fail in result on Test Log 4.3.3.34.117.17 Analog output 3 (0-10Vdc) is 3.91 4.3.3.34.117.17.1 Enter pass/fail in result on Test Log 4.3.3.34.117.18 Analog output 3 (0-10Vdc) is 3.91 4.3.3.34.117.18.1 Enter pass/fail in result on Test Log 4.3.3.34.118 Press ENTER pushbutton to re-enter data entry mode 4.3.3.34.119 First Digit is flashing 4.3.3.34.119.1 Enter pass/fail in result on Test Log 4.3.3.34.120 3.OOE-1 is displayed on front panel 4.3.3.34.120.1 Enter pass/fail in result on Test Log 4.3.3.34.121 Change set point to 1.00-2 (change back original value) 4.3.3.34.122 Value displayed on front panel is 1.00-2 4.3.3.34.122.1 Enter pass/fail in result on Test Log 4.3.3.34.123 Press ENTER pushbutton to exit data entry mode 4.3.3.35 Test 35 : Check Reset of Calibration Mode/Time on restart 4.3.3.35.1 Select position 8 on data entry/function switch (Calibration Mode/Time) and press ENTER pushbutton.

4.3.3.35.2 Value displayed is equal to 6.OOEI 4.3.3.35.3 Left most digit is flashing 4.3.3.35.3.1 Enter pass/fail in result on Test Log 4.3.3.35.4 Change Value to 3.OOE1 4.3.3.35.4.1 Enter pass/fail in result on Test Log 4.3.3.35.5 Press ENTER pushbutton to start the calibrate timer 4.3.3.35.6 Power off UDR

- 4.3.3.35.7 -Power-on-UDR 4.3.3.35.8 After normal operation begins, press ENTER pushbutton to enter the calibrate mode DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 1I123/o2 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DO CTRL SHEET NO. SE 1 3076 PRODUCTION ,4a-/W 162 of 246 PLN

4.3.3.35.9 Value displayed is equal to 6.OOEI 4.3.3.35.9.1 Enter pass/fail in result on Test Log 4.3.3.35.10 Left most digit is flashing 4.3.3.35.10.1 Enter pass/fail in result on Test Log 4.3.3.35.11 Press ENTER pushbutton to exit data entry mode 4.3.3.35.12 Rotate Function Switch to position 9 exit Calibration mode DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 2 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION ,Zy, 163 of 246 94095603VTP PLN

4.3.3.36 Test 36 : Jumper change - Fail Condition - No counts 4.3.3.36.1 Turn UDR power off 4.3.3.36.2 Jumper JP3-4 is OUT (inhibit No Count Fail) 4.3.3.36.3 Turn UDR power on 4.3.3.36.4 Turn off the signal generator 4.3.3.36.5 After eight (8) minutes:

4.3.3.36.6 Check source indicator is off 4.3.3.36.6.1 Enter pass/fail in result on Test Log 4.3.3.36.7 HIGH alarm indicator is off 4.3.3.36.7.1 Enter pass/fail in result on Test Log 4.3.3.36.8 HIGH alarm relay is energized 4.3.3.36.8.1 Enter pass/fail in result on Test Log 4.3.3.36.9 Auxiliary output is energized 4.3.3.36.9.1 Enter pass/fail in result on Test Log 4.3.3.36.10 WARN alarm indicator is off 4.3.3.36.10.1 Enter pass/fail in result on Test Log 4.3.3.36.11 WARN alarm relay is energized 4.3.3.36.11.1 Enter pass/fail in result on Test Log 4.3.3.36.12 Fail indicator is off 4.3.3.36.12.1 Enter pass/fail in result on Test Log 4.3.3.36.13 Fail relay is energized 4.3.3.36.13.1 Enter pass/fail in result on Test Log 4.3.3.36.14 Range indicator is on 4.3.3.36.14.1 Enter pass/fail in result on Test Log 4.3.3.36.15 Backlight indicates mR/h 4.3.3.36.15.1 Enter pass/fail in result on Test Log 4.3.3.36.16 Radiation value displayed on front panel is 0.00 mR/h 4.3.3.36.16.1 Enter pass/fail in result on Test Log 4.3.3.36.17 Analog output 1 (4-20mA) is 4.0 ma 4.3.3.36.17.1 Enter pass/fail in result on Test Log 4.3.3.36.18 Analog output 2 (4-2OmA) is 4.0 ma 4.3.3.36.18.1 Enter pass/fail in result on Test Log 4.3.3.36.19 Analog output 3 (0-1OVdc) is 0.0 v 4.-3.3.36.1 9.1 -Enter pass/fail in result on Test Log 4.3.3.36.20 Remove power and Re-install jumper JP3-4 DATE 10/23/02 TITLE SOFTWARE VALIDATION TEST SYNcoR RADIATION MANAGEMENT I -- PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION .04-1.1-0 164 of 246 0 PLN

4.3.3.37 Test 37: Jumper Change - HIGH/Warn Alarm Automatically Acknowledged 4.3.3.37.1 Turn UDR power off 4.3.3.37.2 Jumper JP3-3 is Out (Automatic Acknowledge) 4.3.3.37.3 Turn UDR power on; After unit initializes:

4.3.3.37.4 Set signal generator frequency to 331 Hz 4.3.3.37.5 Within one minute 4.3.3.37.5.1 Check source indicator is off 4.3.3.37.5.1.1 Enter pass/fail in result on Test Log 4.3.3.37.5.2 HIGH alarm indicator is off 4.3.3.37.5.2.1 Enter pass/fail in result on Test Log 4.3.3.37.5.3 HIGH alarm relay is energized 4.3.3.37.5.3.1 Enter pass/fail in result on Test Log 4.3.3.37.5.4 Auxiliary output is energized 4.3.3.37.5.4.1 Enter pass/fail in result on Test Log 4.3.3.37.5.5 WARN alarm indicator is on steady 4.3.3.37.5.5.1 Enter pass/fail in result on Test Log 4.3.3.37.5.6 WARN alarm relay is de-energized 4.3.3.37.5.6.1 Enter pass/fail in result on Test Log 4.3.3.37.5.7 Fail indicator is off 4.3.3.37.5.7.1 Enter pass/fail in result on Test Log 4.3.3.37.5.8 Fail relay is energized 4.3.3.37.5.8.1 Enter pass/fail in result on Test Log 4.3.3.37.5.9 Range indicator is off 4.3.3.37.5.9.1 Enter pass/fail in result on Test Log 4.3.3.37.5.10 Bargraph is amber 4.3.3.37.5.10.1 Enter pass/fail in result on Test Log 4.3.3.37.5.11 Bargraph has 9 segments lit 4.3.3.37.5.11.1 Enter pass/fail in result on Test Log 4.3.3.37.5.12 Backlight is on mR/h 4.3.3.37.5.12.1 Enter pass/fail in result on Test Log 4.3.3.37.5.13 Radiation value displayed on front panel is 19.9 mR/h 4.3.3.37.5.13.1 Enter pass/fail in result on Test Log 4.3.3.37.5.14 Analog output I (4-2OmA) is 14.55 ma 4.3.3.37.5.14.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST

-SYNCOR RADIATION MANAGEMENT I PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION ,CR'MW 165 of 246 94095603VT P PLN

4.3.3.37.5.15 Analog output 2 (4-20mA) is 14.55 ma 4.3.3.37.5.15.1 Enter pass/fail in result on Test Log 4.3.3.37.5.16 Analog output 3 (0-10Vdc) is 6.6 v 4.3.3.37.5.16.1 Enter pass/fail in result on Test Log 4.3.3.37.6 Set signal generator frequency to 1.68 kHz 4.3.3.37.7 Within one minute:

4.3.3.37.7.1 Check source indicator is off 4.3.3.37.7.1.1 Enter pass/fail in result on Test Log 4.3.3.37.7.2 HIGH alarm indicator is on steady 4.3.3.37.7.2.1 Enter pass/fail in result on Test Log 4.3.3.37.7.3 HIGH alarm relay is de-energized 4.3.3.37.7.3.1 Enter pass/fail in result on Test Log 4.3.3.37.7.4 Auxiliary output is de-energized 4.3.3.37.7.4.1 Enter pass/fail in result on Test Log 4.3.3.37.7.5 WARN alarm indicator is on steady 4.3.3.37.7.5.1 Enter pass/fail in result on Test Log 4.3.3.37.7.6 WARN alarm relay is de-energized 4.3.3.37.7.6.1 Enter pass/fail in result on Test Log 4.3.3.37.7.7 Fail indicator is off 4.3.3.37.7.7.1 Enter pass/fail in result on Test Log 4.3.3.37.7.8 Fail relay is energized 4.3.3.37.7.8.1 Enter pass/fail in result on Test Log 4.3.3.37.7.9 Range indicator is off 4.3.3.37.7.9.1 Enter pass/fail in result on Test Log 4.3.3.37.7.10 Bargraph is red 4.3.3.37.7.10.1 Enter pass/fail in result on Test Log 4.3.3.37.7.11 Bargraph has 12 segments lit 4.3.3.37.7.11.1 Enter pass/fail in result on Test Log 4.3.3.37.7.12 Backlight is on R/h 4.3.3.37.7.12.1.1 Enter pass/fail in result on Test Log 4.3.3.37.7.13 Radiation value displayed on front panel is .101 R/h 4.3.3.37.7.13.1 Enter pass/fail in result on Test Log 4.3.3.37.7.14 Analog output I (4-20mA) is 16.81 ma 4.3.3.37.7.14.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 2302 - - PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION ,*Z& 166 of 246 9409563V TP 1 PLN

4.3.3.37.7.15 Analog output 2 (4-20mA) is 16.81 ma 4.3.3.37.7.15.1 Enter pass/fail in result on Test Log 4.3.3.37.7.16 Analog output 3 (0-10Vdc) is 8.01 v 4.3.3.37.7.16.1 Enter pass/fail in result on Test Log 4.3.3.37.8 Set signal generator frequency to 15 Hz 4.3.3.37.9 Within one minute 4.3.3.37.9.1 Check source indicator is off 4.3.3.37.9.1.1 Enter pass/fail in result on Test Log 4.3.3.37.9.2 HIGH alarm indicator is off 4.3.3.37.9.2.1 Enter pass/fail in result on Test Log 4.3.3.37.9.3 HIGH alarm relay is energized 4.3.3.37.9.3.1 Enter pass/fail in result on Test Log 4.3.3.37.9.4 Auxiliary output is energized 4.3.3.37.9.4.1 Enter pass/fail in result on Test Log 4.3.3.37.9.5 WARN alarm indicator is off 4.3.3.37.9.5.1 Enter pass/fail in result on Test Log 4.3.3.37.9.6 WARN alarm relay is energized 4.3.3.37.9.6.1 Enter pass/fail in result on Test Log 4.3.3.37.9.7 Fail indicator is off 4.3.3.37.9.7.1 -Enter-pass/fail in result on Test Log 4.3.3.37.9.8 Fail relay is energized 4.3.3.37.9.8.1 Enter pass/fail in result on Test Log 4.3.3.37.9.9 Range indicator is off 4.3.3.37.9.9.1 Enter pass/fail in result on Test Log 4.3.3.37.9.10 Bargraph is green 4.3.3.37.9.10.1 Enter pass/fail in result on Test Log 4.3.3.37.9.11 Bargraph has 6 segments lit 4.3.3.37.9.11.1 Enter pass/fail in result on Test Log 4.3.3.37.9.12 Backlight is on mR/h 4.3.3.37.9.12.1 Enter pass/fail in result on Test Log 4.3.3.37.9.13 Radiation value displayed on front panel is .900 mR/h 4.3.3.37.9.13.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT o3/o2 -PROCEDURE,-9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SE 6 0 3VPPLN 1 3076 PRODUCTION 9,%Wf 167 of 246 9

4.3.3.37.9.14 Analog output I (4-2OmA) is 10.25 ma 4.3.3.37.9.14.1 Enter pass/fail in result on Test Log 4.3.3.37.9.15 Analog output 2 (4-2OmA) is 10.25 ma 4.3.3.37.9.15.1 Enter pass/fail in result on Test Log 4.3.3.37.9.16 Analog output 3 (0-10Vdc) is 3.91 v 4.3.3.37.9.16.1 Enter pass/fail in result on Test Log 4.3.3.37.9.17 Remove power and re-install jumper JP3-3 DATE TITLE . SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 1Q'0 PRCEUR, 4060 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET iSIZE NO.

1 3076 PRODUCTION ,?,*'W" 168 of 246 PLN

4.3.3.38 Test 38: Jumper Change - Check Source Mode Condition 1 4.3.3.38.1 Turn UDR power off 4.3.3.38.2 Jumper JP3-3 is IN (Manual Acknowledge) 4.3.3.38.3 Jumper JP3-5 is OUT (check source alarm enabled) 4.3.3.38.4 Turn UDR power on; After UDR initializes:

4.3.3.38.5 Set signal generator frequency to 331 Hz 4.3.3.38.6 Press and hold down the Check Source pushbutton 4.3.3.38.7 Within one minute:

4.3.3.38.7.1 Check source indicator is on 4.3.3.38.7.1.1 Enter pass/fail in result on Test Log 4.3.3.38.7.2 HIGH alarm indicator is off 4.3.3.38.7.2.1 Enter pass/fail in result on Test Log 4.3.3.38.7.3 HIGH alarm relay is energized 4.3.3.38.7.3.1 Enter pass/fail in result on Test Log 4.3.3.38.7.4 Auxiliary output is energized 4.3.3.38.7.4.1 Enter pass/fail in result on Test Log 4.3.3.38.7.5 WARN alarm indicator is flashing 4.3.3.38.7.5.1 Enter pass/fail in result on Test Log 4.3.3.38.7.6 WARN alarm relay is de-energized 4.3.3.38.7.6.1 Enter pass/fail in result on Test Log 4.3.3.38.7.7 Fail indicator is off 4.3.3.38.7.7.1 Enter pass/fail in result on Test Log 4.3.3.38.7.8 Fail relay is-energized -..

4.3.3.38.7.8.1 Enter pass/fail in result on Test Log 4.3.3.38.7.9 Range indicator is off 4.3.3.38.7.9.1 Enter pass/fail in result on Test Log 4.3.3.38.7.10 Bargraph is amber 4.3.3.38.7.10.1 Enter pass/fail in result on Test Log 4.3.3.38.7.11 Bargraph has 9 segments lit 4.3.3.38.7.11.1 Enter pass/fail in result on Test Log 4.3.3.38.7.12 Backlight is on mR/h 4.3.3.38.7.12.1 Enter pass/fail in result on Test Log 4.3.3.38.7.13 Radiation value displayed on front panel is 19.9 mR/h 4.3.3.38.7.13.1 _ Enter pass/fail in result on Test Log 4.3.3.38.7.14 Analog output 1 (4-20mA) is 4.0 ma 4.3.3.38.7.14.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST

-SYNCORRADIATION MANAGEMENT _ 10/23= . PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION I .04£' 169 of 246 94903VT P 1 PLN

4.3.3.38.7.15 Analog output 2 (4-2OmA) is 4.0 ma 4.3.3.38.7.15.1 Enter pass/fail in result on Test Log 4.3.3.38.7.16 Analog output 3 (0-1OVdc) is 0.0 v 4.3.3.38.7.16.1 Enter pass/fail in result on Test Log 4.3.3.38.8 Release the Check Source pushbutton 4.3.3.38.9 Press and hold down the Check Source pushbutton 4.3.3.38.10 Set signal generator frequency to 1.68 kHz 4.3.3.38.11 Within one minute:

4.3.3.38.11.1 Check source indicator is on 4.3.3.38.11.1.1 Enter pass/fail in result on Test Log 4.3.3.38.11.2 HIGH alarm indicator is flashing 4.3.3.38.11.2.1 Enter pass/fail in result on Test Log 4.3.3.38.11.3 HIGH alarm relay is de-energized 4.3.3.38.11.3.1 Enter pass/fail in result on Test Log 4.3.3.38.11.4 Auxiliary output is de-energized 4.3.3.38.11.4.1 Enter pass/fail in result on Test Log 4.3.3.38.11.5 WARN alarm indicator is flashing 4.3.3.38.11.5.1 Enter pass/fail in result on Test Log 4.3.3.38.11.6 WARN alarm relay is de-energized 4.3.3.38.11.6.1 Enter pass/fail in result on Test Log 4.3.3.38.11.7 Fail indicator is off 4.3.3.38.11.7.1 Enter pass/fail in result on Test Log 4.3.3.38.11.8 Fail relay is energized 4.3.3.38.11.8.1 Enter pass/fail in result on Test Log 4.3.3.38.11.9 Range indicator is off 4.3.3.38.11.9.1 Enter pass/fail in result on Test Log 4.3.3.38.11.10 Bargraph is red 4.3.3.38.11.10.1 Enter pass/fail in result on Test Log 4.3.3.38.11.11 Bargraph has 12 segments lit 4.3.3.38.11.11.1 Enter pass/fail in result on Test Log 4.3.3.38.11.12 Backlight is on R/h 4.3.3.38.11.12.1 Enter pass/fail in result on Test Log 4.3.3.38.11.13 Radiation value displayed on front panel is .101R/h 4.3.3.38.11.13.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT Io23102 -- PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. TSE 1 3076 PRODUCTION 1 Vb4 170 of 246 1 PLN

4.3.3.38.11.14 Analog output I (4-2OmA) is 4.0 ma 4.3.3.38.11.14.1 Enter pass/fail in result on Test Log 4.3.3.38.11.15Analog output 2 (4-20mA) is 4.0 ma 4.3.3.38.11.15.1 Enter pass/fail in result on Test Log 4.3.3.38.11.16 Analog output 3 (0-1OVdc) is 0.0 v 4.3.3.38.11.16.1 Enter pass/fail in result on Test Log 4.3.3.38.12 Press ACKNLOWLEDGE pushbutton 4.3.3.38.13 Check source indicator is on 4.3.3.38.13.1 Enter pass/fail in result on Test Log 4.3.3.38.14 HIGH alarm indicator is on steady 4.3.3.38.14.1 Enter pass/fail in result on Test Log 4.3.3.38.15 HIGH alarm relay is de-energized 4.3.3.38.15.1 Enter pass/fail in result on Test Log 4.3.3.38.16 Auxiliary output is de-energized 4.3.3.38.16.1 Enter pass/fail in result on Test Log 4.3.3.38.17 WARN alarm indicator is on steady 4.3.3.38.17.1 Enter pass/fail in result on Test Log 4.3.3.38.18 WARN alarm relay is de-energized 4.3.3.38.18.1 Enter pass/fail in result on Test Log 4.3.3.38.19 -Fail indicator is off 4.3.3.38.19.1 Enter pass/fail in result on Test Log 4.3.3.38.20 Fail relay is energized 4.3.3.38.20.1 Enter pass/fail in result on Test Log 4.3.3.38.21 Range indicator is off 4.3.3.38.21.1 Enter pass/fail in result on Test Log 4.3.3.38.22 Bargraph is red 4.3.3.38.22.1 Enter pass/fail in result on Test Log 4.3.3.38.23 Bargraph has 12 segments lit 4.3.3.38.23.1 Enter pass/fail in result on Test Log 4.3.3.38,24-Backlight is-on-PRh --..

4.3.3.38.24.1 Enter-pass/fail in result on Test Log 4.3.3.38.25 Radiation value displayed on front panel is .101R/h 4.3.3.38.25.1 Enter pass/fail in result on Test Log DATE TFTLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 10-2302 -PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION 0M.W 171 of 246 PLN

4.3.3.38.26 Analog output 1 (4-2OmA) is 4.0 ma 4.3.3.38.26.1 Enter pass/fail in result on Test Log 4.3.3.38.27 Analog output 2 (4-2OmA) is 4.0 ma 4.3.3.38.27.1 Enter pass/fail in result on Test Log 4.3.3.38.28 Analog output 3 (0-1OVdc) is 0.0 v 4.3.3.38.28.1 Enter pass/fail in result on Test Log 4.3.3.38.29 Set signal generator frequency to 15 Hz 4.3.3.38.30 Release the Check Source pushbutton 4.3.3.38.31 Within one minute:

4.3.3.38.31.1 Check source indicator is off 4.3.3.38.31.1.1 Enter pass/fail in result on Test Log 4.3.3.38.31.2 HIGH alarm indicator is off 4.3.3.38.31.2.1 Enter pass/fail in result on Test Log 4.3.3.38.31.3 HIGH alarm relay is energized 4.3.3.38.31.3.1 Enter pass/fail in result on Test Log 4.3.3.38.31.4 Auxiliary output is energized 4.3.3.38.31.4.1 Enter pass/fail in result on Test Log 4.3.3.38.31.5 WARN alarm indicator is off 4.3.3.38.31.5.1 Enter pass/fail in result on Test Log 4.3.3.38.31.6 WARN alarm relay is energized 4.3.3.38.31.6.1 Enter pass/fail in result on Test Log 4.3.3.38.31.7 Fail indicator is off 4.3.3.38.31.7.1 Enter pass/fail in result on Test Log 4.3.3.38.31.8 Fail relay is energized 4.3.3.38.31.8.1 Enter pass/fail in result on Test Log 4.3.3.38.31.9 Range indicator is off 4.3.3.38.31.9.1 Enter pass/fail in result on Test Log 4.3.3.38.31.10 Bargraph is green 4.3.3.38.31.10.1 Enter pass/fail in result on Test Log 4.3.3.38.31.11 6segments lit 4.3.3.38.31.11.1 Enter pass/fail in result on Test Log 4.3.3.38.31.-12 Ba-cklight iS-o--mR/h 4.3.3.38.31.12.1 Enter pass/fail in result on Test Log DATE 103/0TITLE SOFTWARE VALIDATION TEST

-SYNCOR RADIATION MANAGEMENT 102 - -PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION oa',( 172 of 246 99 6 0 3VT PLN

4.3.3.38.31.13 Radiation value displayed on front panel is .900 mR/h 4.3.3.38.31.13.1 Enter pass/fail in result on Test Log 4.3.3.38.31.14Analog output I (4-2OmA) is 10.25 ma 4.3.3.38.31.14.1 Enter pass/fail in result on Test Log 4.3.3.38.31.15Analog output 2 (4-2OmA) is 10.25 ma 4.3.3.38.31.15.1 Enter pass/fail in result on Test Log 4.3.3.38.31.16 Analog output 3 (0-1OVdc) is 3.91 v 4.3.3.38.31.16.1 Enter pass/fail in result on Test Log 4.3.3.38.31.17 Remove power and re-install jumpers JP3-3 and JP3-5 4.3.3.39 Test 39 : Jumper Change - Check Source Mode Condition 2 4.3.3.39.1 Turn UDR power off 4.3.3.39.2 Jumper JP3-3 is OUT (Automatic Acknowledge) 4.3.3.39.3 Jumper JP3-5 is OUT (check source alarm enabled) 4.3.3.39.4 Turn UDR power on; After UDR initializes:

4.3.3.39.5 Press and hold down the Check Source pushbutton 4.3.3.39.6 Set signal generator frequency to 331 Hz 4.3.3.39.7 Within one minute:

4.3.3.39.7.1 Check source indicator is on 4.3.3.39.7.1.1 Enter pass/fail in result on Test Log 4.3.3.39.7.2 HIGH alarm indicator is off 4.3.3.39.7.2.1 Enter pass/fail in result on Test Log 4.3.3.39.7.3 HIGH alarm relay is energized 4.3.3.39.7.3.1 Enter pass/fail in result on Test Log 4.3.3.39.7.4 Auxiliary output is energized 4.3.3.39.7.4.1 Enter pass/fail in result on Test Log 4.3.3.39.7.5 WARN alarm indicator is on steady 4.3.3.39.7.5.1 Enter pass/fail in result on Test Log 4.3.3.39.7.6 WARN alarm relay is de-energized 4.3.3.39.7.6.1 Enter pass/fail in result on Test Log 4.3.3.39.7.7--Fail indicator is off 4.3.3.39.7.7.1 Enter pass/fail in result on Test Log 4.3.3.39.7.8 Fail relay is energized 4.3.3.39.7.8.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR-RADIATION MANAGEMENT I PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION 173 of 246 4 6 0 VTP 3

.',;((*, PLN

4.3.3.39.7.9 Range indicator is off 4.3.3.39.7.9.1 Enter pass/fail in result on Test Log 4.3.3.39.7.10 Bargraph is amber 4.3.3.39.7.10.1 Enter pass/fail in result on Test Log 4.3.3.39.7.11 Bargraph has 9 segments lit 4.3.3.39.7.11.1 Enter pass/fail in result on Test Log 4.3.3.39.7.12 Backlight is on mR/h 4.3.3.39.7.12.1 Enter pass/fail in result on Test Log 4.3.3.39.7.13 Radiation value displayed on front panel is 19.9 mR/h 4.3.3.39.7.13.1 Enter pass/fail in result on Test Log 4.3.3.39.7.14 Analog output 1 (4-2OmA) is 4.0 ma 4.3.3.39.7.14.1 Enter pass/fail in result on Test Log 4.3.3.39.7.15 Analog output 2 (4-2OmA) is 4.0 ma 4.3.3.39.7.15.1 Enter pass/fail in result on Test Log 4.3.3.39.7.16 Analog output 3 (0-1 OVdc) is 0.0 v 4.3.3.39.7.16.1 Enter pass/fail in result on Test Log 4.3.3.39.8 Set signal generator frequency to 1.68 kHz 4.3.3.39.9 Within one minute:

-4.3.3.39.9.1 -_C-heck-source indicator is on 4.3.3.39.9.1.1 Enter pass/fail in result on Test Log 4.3.3.39.9.2 HIGH alarm indicator is on steady 4.3.3.39.9.2.1 Enter pass/fail in result on Test Log 4.3.3.39.9.3 HIGH alarm relay is de-energized 4.3.3.39.9.3.1 Enter pass/fail in result on Test Log 4.3.3.39.9.4 Auxiliary output is de-energized 4.3.3.39.9.4.1 Enter pass/fail in result on Test Log 4.3.3.39.9.5 WARN alarm indicator is on steady 4.3.3.39.9.5.1 Enter pass/fail in result on Test Log 4.3.3.39.9.6 WARN alarm relay is de-energized 4.3.3.39.9.6.1 Enter pass/fail in result on Test Log 4.3.3.39.9.7 Fail indicator is off 4.3.3.39.9.7.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 3PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. TSIZE 1 3076 PRODUCTION ,*.~lr 174 of 246 PLN

4.3.3.39.9.8 Fail relay is energized 4.3.3.39.9.8.1 Enter pass/fail in result on Test Log 4.3.3.39.9.9 Range indicator is off 4.3.3.39.9.9.1 Enter pass/fail in result on Test Log 4.3.3.39.9.10 Bargraph is red 4.3.3.39.9.10.1 Enter pass/fail in result on Test Log 4.3.3.39.9.11 Bargraph has 12 segments lit 4.3.3.39.9.11.1 Enter pass/fail in result on Test Log 4.3.3.39.9.12 Backlight is on R/h 4.3.3.39.9.12.1 Enter pass/fail in result on Test Log 4.3.3.39.9.13 Radiation value displayed on front panel is .101R/h 4.3.3.39.9.13.1 Enter pass/fail in result on Test Log 4.3.3.39.9.14 Analog output I (4-20mA) is 4.0 ma 4.3.3.39.9.14.1 Enter pass/fail in result on Test Log 4.3.3.39.9.15 Analog output 2 (4-2OmA) is 4.0 ma 4.3.3.39.9.15.1 Enter pass/fail in result on Test Log 4.3.3.39.9.16 Analog output 3 (0-1OVdc) is 0.0 v 4.3.3.39.9.16.1 Enter pass/fail in result on Test Log 4.3.3.39.10 Set signal generator frequency to 15 Hz 4.3.3.39.11 Release the Check Source pushbutton 4.3.3.39.12 Within one minute:

4.3.3.39.12.1 Check source indicator is off 4.3.3.39.12.1.1 Enter pass/fail in result on Test Log 4.3.3.39.12.2 HIGH alarm indicator is off 4.3.3.39.12.2.1 Enter pass/fail in result on Test Log 4.3.3.39.12.3 HIGH alarm relay is energized 4.3.3.39.12.3.1 Enter pass/fail in result on Test Log 4.3.3.39.12.4 Auxiliary output is energized 4.3.3.39.12.4.1 Enter pass/fail in result on Test Log 4.3.3.39.12.5 WARN alarm indicator is off 4.3.3.39.12.5.1 Enter pass/fail in result on Test Log 4.3.3.39.12.6 WARN alarm relay is energized 4.3.3.39.12.6.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 1023/2 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION ,%'.( 175 of 246 PLN

4.3.3.39.12.7 Fail indicator is off 4.3.3.39.12.7.1 Enter pass/fail in result on Test Log 4.3.3.39.12.8 Fail relay is energized 4.3.3.39.12.8.1 Enter pass/fail in result on Test Log 4.3.3.39.12.9 Range indicator is off 4.3.3.39.12.9.1 Enter pass/fail in result on Test Log 4.3.3.39.12.10 Bargraph is green 4.3.3.39.12.10.1 Enter pass/fail in result on Test Log 4.3.3.39.12.11 Bargraph has 6 segments lit 4.3.3.39.12.11.1 Enter pass/fail in result on Test Log 4.3.3.39.12.12 Backlight is on mR/h 4.3.3.39.12.12.1 Enter pass/fail in result on Test Log 4.3.3.39.12.13 Radiation value displayed on front panel is .900 mR/h 4.3.3.39.12.13.1 Enter pass/fail in result on Test Log 4.3.3.39.12.14 Analog output I (4-2OmA) is 10.25 ma 4.3.3.39.12.14.1 Enter pass/fail in result on Test Log 4.3.3.39.12.15Analog output 2 (4-2OmA) is 10.25 ma 4.3.3.39.12.15.1 Enter pass/fail in result on Test Log 4.3.3.39.12.16 Analog output 3 (0-1OVdc) is 3.91 v S-- 4.3.3.39.12.16.1--Enter-pass/fail in result on Test Log 4.3.3.39.12.17 Remove power and re-install jumpers JP3-3 and JP3-5 4.3.3.40 Test 40: Alarm Test with changed HIGH and WARN set points Normal -> Wam -> High -> Acknowledge -> Normal 4.3.3.40.1 Remove power from UDR 4.3.3.40.2 Set Jumpers back to factory default setting 4.3.3.40.3 Power up UDR; After UDR initializes:

4.3.3.40.4 Set signal generator frequency to 0.15 Hz to prevent tripping alarms 4.3.3.40.5 Change Set Point 1 (Wam Set Point) to 2.OOE-1 4.3.3.40.6 Change Set Point 0 (High Alarm Set Point) to 2.50E-1 4.3.3.40.7 Set signal generator frequency to 3.4 Hz 4.3.3.40.8 Within one minute 4.3.3.40.8.1 Check source indicator is off 4.3.3.40.8.1.1 Enter pass/fail in result on Test Log 4.3.3.40.8.2 HIGH alarm indicator is off 4.3.3.40.8.2.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT -PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. TSZE 94095603VTPP 1 3076 PRODUCTION f.*?*'1( 176 of 246PL

4.3.3.40.8.3 HIGH alarm relay is energized 4.3.3.40.8.3.1 Enter pass/fail in result on Test Log 4.3.3.40.8.4 Auxiliary output is energized 4.3.3.40.8.4.1 Enter pass/fail in result on Test Log 4.3.3.40.8.5 WARN alarm indicator is flashing 4.3.3.40.8.5.1 Enter pass/fail in result on Test Log 4.3.3.40.8.6 WARN alarm relay is de-energized 4.3.3.40.8.6.1 Enter pass/fail in result on Test Log 4.3.3.40.8.7 Fail indicator is off 4.3.3.40.8.7.1 Enter pass/fail in result on Test Log 4.3.3.40.8.8 Fail relay is energized 4.3.3.40.8.8.1 Enter pass/fail in result on Test Log 4.3.3.40.8.9 Range indicator is off 4.3.3.40.8.9.1 Enter pass/fail in result on Test Log 4.3.3.40.8.10 Bargraph is amber 4.3.3.40.8.10.1 Enter pass/fail in result on Test Log 4.3.3.40.8.11 Bargraph has 3 segments lit 4.3.3.40.8.11.1 Enter pass/fail in result on Test Log 4.3.3.40.8.12 Backlight is on mR/h

- 4.3.3.40.8.12:l--Enter-pass/fail in result on Test Log 4.3.3.40.8.13 Radiation value displayed on front panel is .204 mR/h 4.3.3.40.8.13.1 Enter pass/fail in result on Test Log 4.3.3.40.8.14 Analog output I (4-2OmA) is 8.19 ma 4.3.3.40.8.14.1 Enter pass/fail in result on Test Log 4.3.3.40.8.15 Analog output 2 (4-20mA) is 8.19 ma 4.3.3.40.8.15.1 Enter pass/fail in result on Test Log 4.3.3.40.8.16 Analog output 3 (0-10Vdc) is 2.62 v

-4.3.3.40.8.16.1 Enter pass/fail in result on Test Log 4.3.3.40.9-Set signal generator frequency to 4.4 Hz 4.3.3.40.10 Within one minute:

4.3.3.40.10.1 Check source indicator is off 4.3.3.40.10.1.1 Enter pass/fail in result on Test Log DATE T[TLE SOFTWARE VALIDATION TEST SYNCoR-RADIATiON MANAGEMENT 102302PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION 9ZI/M 177 of 246 PLN

4.3.3.40.10.2 HIGH alarm indicator is flashing 4.3.3.40.10.2.1 Enter pass/fail in result on Test Log 4.3.3.40.10.3 HIGH alarm relay is de-energized 4.3.3.40.10.3.1 Enter pass/fail in result on Test Log 4.3.3.40.10.4 Auxiliary output is de-energized 4.3.3.40.10.4.1 Enter pass/fail in result on Test Log 4.3.3.40.10.5 WARN alarm indicator is flashing 4.3.3.40.10.5.1 Enter pass/fail in result on Test Log 4.3.3.40.10.6 WARN alarm relay is de-energized 4.3.3.40.10.6.1 Enter pass/fail in result on Test Log 4.3.3.40.10.7 Fail indicator is off 4.3.3.40.10.7.1 Enter pass/fail in result on Test Log 4.3.3.40.10.8 Fail relay is energized 4.3.3.40.10.8.1 Enter pass/fail in result on Test Log 4.3.3.40.10.9 Range indicator is off 4.3.3.40.10.9.1 Enter pass/fail in result on Test Log 4.3.3.40.10.10 Bargraph is red 4.3.3.40.10.10.1 Enter pass/fail in result on Test Log 4.3.3.40.10.11 Bargraph has 4 segments lit 4.3.3.40.10.11.1 --Enter pass/fail in-result on Test Log 4.3.3.40.10.12 Backlight is on mR/h 4.3.3.40.10.12.1.1 Enter pass/fail in result on Test Log 4.3.3.40.10.13 Radiation value displayed on front panel is .264 mR/h 4.3.3.40.10.13.1 Enter pass/fail in result on Test Log 4.3.3.40.10.14Analog output I (4-20mA) is 8.55 ma 4.3.3.40.10.14.1 Enter pass/fail in result on Test Log 4.3.3.40.10.15 Analog output 2 (4-2OmA) is 8.55 ma 4.3.3.40.10.15.1 Enter pass/fail in result on Test Log 4.3.3.40.10.16 Analog output 3 (0-1OVdc) is 2.84 v 4.3.3.40.10.16.1 Enter pass/fail in result on Test Log 4.3.3.40.11 Set signal generator frequency to 1.0 Hz 4.3.3.40.12 Within one minute 4.3.3.40.12.1 Check source indicator is off 4.3.3.40.12.1.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST

-SYNCOR RADIATION MNAGEMENT I 10/23/02 -- _ PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION £Y,."f 1 178 of 246 9 PLN

4.3.3.40.12.2 HIGH alarm indicator is on flashing 4.3.3.40.12.2.1 Enter pass/fail in result on Test Log 4.3.3.40.12.3 HIGH alarm relay is de-energized 4.3.3.40.12.3.1 Enter pass/fail in result on Test Log 4.3.3.40.12.4 Auxiliary output is de-energized 4.3.3.40.12.4.1 Enter pass/fail in result on Test Log 4.3.3.40.12.5 WARN alarm indicator is on flashing 4.3.3.40.12.5.1 Enter pass/fail in result on Test Log 4.3.3.40.12.6 WARN alarm relay is de-energized 4.3.3.40.12.6.1 Enter pass/fail in result on Test Log 4.3.3.40.12.7 Fail indicator is off 4.3.3.40.12.7.1 Enter pass/fail in result on Test Log 4.3.3.40.12.8 Fail relay is energized 4.3.3.40.12.8.1 Enter pass/fail in result on Test Log 4.3.3.40.12.9 Range indicator is off 4.3.3.40.12.9.1 Enter pass/fail in result on Test Log 4.3.3.40.12.10 Bargraph is red 4.3.3.40.12.10.1 Enter pass/fail in result on Test Log 4.3.3.40.12.11 Bargraph has 2 segments lit 4.3.3.40.12.11.1 -Enter-pass/fail in result on Test Log 4.3.3.40.12.12 Backlight is on mR/h 4.3.3.40.12.12.1 Enter pass/fail in result on Test Log 4.3.3.40.12.13 Radiation value displayed on front panel is .060 mR/h 4.3.3.40.12.13.1 Enter pass/fail in result on Test Log 4.3.3.40.12.14 Analog output I (4-20mA) is 6.49 ma 4.3.3.40.12.14.1 Enter pass/fail in result on Test Log 4.3.3.40.12.15 Analog output 2 (4-2OmA) is 6.49 ma 4.3.3.40.12.15.1 -Enter pass/fail in result on Test Log 4.3.3.40.12.16Analog output 3 (0-1OVdc) is 1.56 v 4.3.3.40.12.16.1 Enter pass/fail in result on Test Log 4.3.3.40.13 Press ALARM ACKNOWLEDGE pushbutton 4.3.3.40.14 Check source indicator is off 4.3.3.40.14.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VAUDATION TEST SYNCOR-RADIATION MA GEMENT 10/2302 -- PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION ,6%?,. 179 of 246 PLN

4.3.3.40.15 HIGH alarm indicator is off 4.3.3.40.15.1 Enter pass/fail in result on Test Log 4.3.3.40.16 HIGH alarm relay is energized 4.3.3.40.16.1 Enter pass/fail in result on Test Log 4.3.3.40.17 Auxiliary output is energized 4.3.3.40.17.1 Enter pass/fail in result on Test Log 4.3.3.40.18 WARN alarm indicator is off 4.3.3.40.18.1 Enter pass/fail in result on Test Log 4.3.3.40.19 WARN alarm relay is energized 4.3.3.40.19.1 Enter pass/fail in result on Test Log 4.3.3.40.20 Fail indicator is off 4.3.3.40.20.1 Enter pass/fail in result on Test Log 4.3.3.40.21 Fail relay is energized 4.3.3.40.21.1 Enter pass/fail in result on Test Log 4.3.3.40.22 Range indicator is off 4.3.3.40.22.1 Enter pass/fail in result on Test Log 4.3.3.40.23 Bargraph is green 4.3.3.40.23.1 Enter pass/fail in result on Test Log 4.3.3.40.24 Bargraph has 2 segments lit 4.3.3.40.24.1 Enter pass/fail in -result on Test Log 4.3.3.40.25 Backlight is on mR/h 4.3.3.40.25.1 Enter pass/fail in result on Test Log 4.3.3.40.26 Radiation value displayed on front panel is .060 mR/h 4.3.3.40.26.1 Enter pass/fail in result on Test Log 4.3.3.40.27 Analog output I (4-20mA) is 6.49 ma 4.3.3.40.27.1 Enter pass/fail in result on Test Log 4.3.3.40.28 Analog output 2 (4-2OmA) is 6.49 ma 4.3.3.40.28.1 Enter pass/fail in result on Test Log 4.3.3.40.29 Analog output 3 (0-1 OVdc) is 1.56 v 4.3.3.40.29.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT Io 3Io2 . PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION ,*?%Y[(( 180 of 246 94095603V'PP PIN

4.3.3.41 Test 41: Conversion Constant 4.3.3.41.1 Change Set Point 5 (Conversion Constant) to 1.OOE-1 4.3.3.41.2 Set signal generator to 0.001Hz (this will cause an Underrange condition) 4.3.3.41.3 Within one minute 4.3.3.41.3.1 Check source indicator is off 4.3.3.41.3.1.1 Enter pass/fail in result on Test Log 4.3.3.41.3.2 HIGH alarm indicator is off 4.3.3.41.3.2.1 Enter pass/fail in result on Test Log 4.3.3.41.3.3 HIGH alarm relay is energized 4.3.3.41.3.3.1 Enter pass/fail in result on Test Log 4.3.3.41.3.4 Auxiliary output is energized 4.3.3.41.3.4.1 Enter pass/fail in result on Test Log 4.3.3.41.3.5 WARN alarm indicator is off 4.3.3.41.3.5.1 Enter pass/fail in result on Test Log 4.3.3.41.3.6 WARN alarm relay is energized 4.3.3.41.3.6.1 Enter pass/fail in result on Test Log 4.3.3.41.3.7 Fail indicator is off 4.3.3.41.3.7.1 Enter.-pass/fai!jn result-on Test Log 4.3.3.41.3.8 Fail relay is energized 4.3.3.41.3.8.1 Enter pass/fail in result on Test Log 4.3.3.41.3.9 Range indicator is on 4.3.3.41.3.9.1 Enter pass/fail in result on Test Log 4.3.3.41.3.10 Bargraph is off 4.3.3.41.3.10.1 Enter pass/fail in result on Test Log 4.3.3.41.3.11 Bargraph has 0 segments lit 4.3.3.41.3.11.1 Enter pass/fail in result on Test Log 4.3.3.41.3.12 Backlight is on mR/h 4.3.3.41.3.12.1 Enter pass/fail in result on Test Log 4.3.3.41.3.13 Radiation value displayed on front panel is 0.00 mR/h 4.3.3.41.3.13.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 10123/02 PROCEDURE,9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 3

1 3076 PRODUCTION I .9-'f' 181 of 246 94056 VTPPLN

4.3.3.41.3.14 Analog output I (4-2OmA) is 4.0 ma 4.3.3.41.3.14.1 Enter pass/fail in result on Test Log 4.3.3.41.3.15 Analog output 2 (4-20mA) is 4.0 ma 4.3.3.41.3.15.1 Enter pass/fail in result on Test Log 4.3.3.41.3.16 Analog output 3 (0-10Vdc) is 0.0 v 4.3.3.41.3.16.1 Enter pass/fail in result on Test Log 4.3.3.41.4 Change Set Point 5 (Conversion Constant) back to 1.00-3 4.3.3.42 Test 42: Resolving Time 4.3.3.42.1 Set signal generator to 1.68 kHz 4.3.3.42.2 Radiation value displayed on front panel is .101 R/h 4.3.3.42.3 Change Set Point 2 (Resolving Time /Dead Time) to 3.31 E-6 4.3.3.42.4 Within one minute 4.3.3.42.4.1 Check source indicator is off 4.3.3.42.4.1.1 Enter pass/fail in result on Test Log 4.3.3.42.4.2 HIGH alarm indicator is on 4.3.3.42.4.2.1 Enter pass/fail in result on Test Log 4.3.3.42.4.3 HIGH alarm relay is de-energized S4.3.3A42.4.3.-17Ente-pass/failin-result on Test Log 4.3.3.42.4.4 Auxiliary output is de-energized 4.3.3.42.4.4.1 Enter pass/fail in result on Test Log 4.3.3.42.4.5 WARN alarm indicator is on 4.3.3.42.4.5.1 Enter pass/fail in result on Test Log 4.3.3.42.4.6 WARN alarm relay is de-energized 4.3.3.42.4.6.1 Enter pass/fail in result on Test Log 4.3.3.42.4.7 Fail indicator is off 4.3.3.42.4.7.1 Enter pass/fail in result on Test Log 4.3.3.42.4.8 Fail relay is energized 4.3.3.42.4.8.1 Enter pass/fail in result on Test Log 4.3.3.42.4.9 Range indicator is off 4.3.3.42.4.9.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 3 - PROCEDURE, 9405603 DOC CTRL SHEET NO. S ME REV ECN NO. RELEASED FOR 1 3076 PRODUCTION J'YMY 182 of 246 PLN

4.3.3.42.4.10 Bargraph is red 4.3.3.42.4.10.1 Enter pass/fail in result on Test Log 4.3.3.42.4.11 Bargraph has 12 segments lit 4.3.3.42.4.11.1 Enter pass/fail in result on Test Log 4.3.3.42.4.12 Backlight is on R/h 4.3.3.42.4.12.1 Enter pass/fail in result on Test Log 4.3.3.42.4.13 Radiation value displayed on front panel is .151 RPh 4.3.3.42.4.13.1 Enter pass/fail in result on Test Log 4.3.3.42.4.14 Analog output I (4-20mA) is 17.38 ma 4.3.3.42.4.14.1 Enter pass/fail in result on Test Log 4.3.3.42.4.15 Analog output 2 (4-20mA) is 17.38 ma 4.3.3.42.4.15.1 Enter pass/fail in result on Test Log 4.3.3.42.4.16 Analog output 3 (0-10Vdc) is 8.36 v 4.3.3.42.4.16.1 Enter pass/fail in result on Test Log 4.3.3.43 Test 43: Calibration mode with Check Source on 4.3.3.43.1 Set signal generator to 15.0 Hz 4.3.3.43.2 Press and hold in the Check Source pushbutton 4.3.3.43.3 Check Source indicator is on, green 4.3.3.43.3.1 Enter pass/fail on Test Log 4.3.3.43.4 Turn rotary set point switch to position 8 and press ENTER pushbutton to enter calibrate mode and lock in the check source function 4.3.3.43.5 Front panel display is 6.OOE1 (time in seconds) 4.3.3.43.5.1 Enter pass/fail on Test Log 4.3.3.43.6 First digit is flashing 4.3.-3:43.6.A *Enterpassifail in-result-orn-Test-L-og 4.3.3.43.7 Release the Check Source pushbutton DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 10/23102 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET No.TSZE 0

1 3076 PRODUCTION ,0,,Y' 183 of 246 6 409 6 3 VT PLN

4.3.3.43.7.1 Check source indicator is on 4.3.3.43.7.1.1 Enter pass/fail in result on Test Log 4.3.3.43.7.2 HIGH alarm indicator is off 4.3.3.43.7.2.1 Enter pass/fail in result on Test Log 4.3.3.43.7.3 HIGH alarm relay is de-energized 4.3.3.43.7.3.1 Enter pass/fail in result on Test Log 4.3.3.43.7.4 Auxiliary output is de-energized 4.3.3.43.7.4.1 Enter pass/fail in result on Test Log 4.3.3.43.7.5 WARN alarm indicator is off 4.3.3.43.7.5.1 Enter pass/fail in result on Test Log 4.3.3.43.7.6 WARN alarm relay is de-energized 4.3.3.43.7.6.1 Enter pass/fail in result on Test Log 4.3.3.43.7.7 Fail indicator is on 4.3.3.43.7.7.1 Enter pass/fail in result on Test Log 4.3.3.43.7.8 Fail relay is de-energized 4.3.3.43.7.8.1 Enter pass/fail in result on Test Log 4.3.3.43.7.9 Range indicator is off 4.3.3.43.7;91;-Enter pass/fail in-result on Test Log 4.3.3.43.7.10 Bargraph has no segments lit 4.3.3.43.7.10.1 Enter pass/fail in result on Test Log 4.3.3.43.7.11 Backlights are off 4.3.3.43.7.11.1 Enter pass/fail in result on Test Log 4.3.3.43.7.12 Analog output I (4-2OmA) is 10.25 ma 4.3.3.43.7.12.1 Enter pass/fail in result on Test Log 4.3.3.43.7.13 Analog output 2 (4-2OmA) is 10.25 ma 4.3.3.43.7.13.1 Enter pass/fail in result on Test Log 4.3.3.43.7.14 Analog output 3 (0-10Vdc) is 3.91 v 4.3.3.43.7.14.1 Enter pass/fail in result on Test Log 4.3.3.43.8 Press ENTER pushbutton to start calibrate timer 4.3.3.43.9 All three backlights are flashing, mR/h, R/h and kRPh are flashing 4.3.3.43.9.1 Enter pass/fail on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCORRADIATION MANAGEMENT ---PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION I ,'l(( 184 of 246 PLN

4.3.3.43.10 After one minute:

4.3.3.43.10.1 Front panel display is 9.00E2 4.3.3.43.10.1.1 Enter pass/fail on Test Log 4.3.3.43.10.2 All digits are on steady 4.3.3.43.10.2.1 Enter pass/fail on Test Log 4.3.3.43.10.3 Check source indicator is on 4.3.3.43.10.3.1 Enter pass/fail in result on Test Log 4.3.3.43.10.4 HIGH alarm indicator is off 4.3.3.43.10.4.1 Enter pass/fail in result on Test Log 4.3.3.43.10.5 HIGH alarm relay is de-energized 4.3.3.43.10.5.1 Enter pass/fail in result on Test Log 4.3.3.43.10.6 Auxiliary output is de-energized 4.3.3.43.10.6.1 Enter pass/fail in result on Test Log 4.3.3.43.10.7 WARN alarm indicator is off 4.3.3.43.10.7.1 Enter pass/fail in result on Test Log 4.3.3.43.10.8 WARN alarm relay is de-energized 4.3.3.43.10.8.1 Enter pass/fail in result on Test Log 4.3.3.43.10.9 Fail indicator is on 4.3.3.43.10.9.1 Enter pass/fail in result on Test Log 4.3.3.43.10.10 Fail relay is de-energized 4.3.3.43.10.10.1 Enter pass/fail in result on Test Log 4.3.3.43.10.11 Range indicator is off 4.3.3.43.10.11.1 Enter pass/fail in result on Test Log 4.3.3.43.10.12 Bargraph has no segments lit 4.3.3.43.10.12.1 Enter pass/fail in result on Test Log 4.3.3.43.10.13 All Backlights are on, steady 4.3.3.43.10.13.1 Enter pass/fail in result on Test Log 4.3.3.43.10.14 Radiation value is 9.00E2 4.3.3.43.10.14.1 Enter pass/fail in result on Test Log 4.3.3.43.10.15Analog output I (4-2OmA) is 4.00 ma 4.3.3.43.10.15.1 Enter pass/fail in result on Test Log 4.3.3.43.10.16 Analog output 2 (4-2OrnA)is 4.00 ma 4.3.3.43.10.16.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 1032 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION I,9',(( 185 of 246 9P PLN

4.3.3.43.10.17Analog output 3 (0-10Vdc) is 0.00 v 4.3.3.43.10.17.1 Enter pass/fail in result on Test Log 4.3.3.43.11 Turn rotary set point switch to position 9 to exit Calibration mode 4.3.3.43.12 Within 5 seconds:

4.3.3.43.12.1 Check source indicator is off 4.3.3.43.12.1.1 Enter pass/fail in result on Test Log 4.3.3.43.12.2 HIGH alarm indicator is on, flashing 4.3.3.43.12.2.1 Enter pass/fail in result on Test Log 4.3.3.43.12.3 HIGH alarm relay is de-energized 4.3.3.43.12.3.1 Enter pass/fail in result on Test Log 4.3.3.43.12.4 Auxiliary output is de-energized 4.3.3.43.12.4.1 Enter pass/fail in result on Test Log 4.3.3.43.12.5 WARN alarm indicator is on, flashing 4.3.3.43.12.5.1 Enter pass/fail in result on Test Log 4.3.3.43.12.6 WARN alarm relay is de-energized 4.3.3.43.12.6.1 Enter pass/fail in result on Test Log 4.3.3.43.12.7 Fail indicator is off 4.3.3.43.12.7.1 Enter pass/fail in result on Test Log 4.3.3.43.12.8 Fail relay is energized 4.3.3.43.12.8.1 Enter pass/fail in result on Test Log 4.3.3.43.12.9 Range indicator is off 4.3.3.43.12.9.1 Enter pass/fail in result on Test Log 4.3.3.43.12.10 Bargraph is red 4.3.3.43.12.10.1 Enter pass/fail in result on Test Log 4.3.3.43.12.11 Bargraph has 6 segments lit 4.3.3.43.12.11.1 Enter pass/fail in result on Test Log 4.3.3.43.12.12 Backlight is on mR/h 4.3.3.43.12.12.1 Enter pass/fail in result on Test Log 4.3.3.43.12.13 Radiation value displayed on front panel is .900 mR/h 4.3.3.43.12.13.1 Enter pass/fail in result on Test Log 4.3.3.43.12.14Analog output I (4-2OmA) is 10.25 ma 4.3.3.43.12.14.1 Enter pass/fail in result on Test Log DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTI ON ,iQ%'(.' 186 of 246PN 94095603VT P1

4.3.3.43.12.15 Analog output 2 (4-20mA) is 10.25 ma 4.3.3.43.12.15.1 Enter pass/fail in result on Test Log 4.3.3.43.12.16 Analog output 3 (0-1OVdc) is 3.91 v 4.3.3.43.12.16.1.1 Enter pass/fail in result on Test Log DATE aTITLE SOFTWARE VALIDATION TEST 10/23/02 SYNCOR RADIATION MANAGEMENT PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL I SHEET NO. SIZE 1 3076 PRODUCTION I ?OZ/t 187 of 246 991 PLN

5 Test Item Transmittal Report 5.1 Transmittal Report Identifier. 94095603VTP 5.2 Transmitted Items: Procedure 94095603VTP 956A-201-MI Digital Ratemeter with 94095603, Rev. 2, PROM

5.3 Location

Syncor Radiation Management 6045 Cochran Rd.

Solon, OH. 44039 Systems Field Service Test Lab

5.4 Status

Ready to test DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MNAGEMENT 3o2 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SE 1 3076 PRODUCTION ,4,IM 188 of 246 PLN

6 Test Log 6.1 Test Log Identifier. 94095603VTP 6.2

Description:

956A-201-M1 with 94095603 PROM 6.3 Activity and Event Entries: As noted in procedure 94095603VTP 6.4 Execution

Description:

As noted below 6.5 Procedure Results:

Procedure Result Tester Date Reference # Pass/Fail 4.3.3.1.1 4.3.3.1.2 4.3.3.1.3 4.3.3.1.4 4.3.3.1.5 4.3.3.1.6 4.3.3.1.7 4.3.3.1.8 4.3.3.1.9 4.3.3.2.2 4.3.3.2.3 4.3.3.2.4.1 4.3.3.2.4.2 4.3.3.2.4.3 4.3.3.2.4.4 4.3.3.2.4.5 4.3.3.2.4.6 4.3.3.2.4.7 4.3.3.2.4.8 4.3.3.2.4.9 4.3.3.2.4.10 4.3.3.2.4.11 4.3.3.2.4.12 4.3.3.3.3 4.3.3.3.6 4.3.3.3.7 4.3.3.3.10 4.3.3.3.11 4.3.3.3.14 4.3.3.3.15 4.3.3.3.18 DATE 1 TrLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT PROCEDURE, 9405603 REV ECNNO. RELEASEDIFOR DOC/T 89 NO. 94095603VPN SIZE 1 3076 1PRODUCTION r 0/ 189 of 2461 N

4.3.3.3.19 4.3.3.3.22 4.3.3.3.23 4.3.3.3.26 4.3.3.3.29 4.3.3.3.30 4.3.3.3.33 4.3.3.3.34 4.3.3.3.37 4.3.3.3.38 4.3.3.3.41 4.3.3.3.44 4.3.3.3.47 4.3.3.3.50 4.3.3.3.53 4.3.3.3.56 4.3.3.4.2 4.3.3.4.3 4.3.3.4.4 4.3.3.4.5 4.3.3.4.6 4.3.3.4.7 4.3.3.4.8 4.3.3.4.9 4.3.3.4.10 4.3.3.4.11 4.3.3.4.12 4.3.3.4.13 4.3.3.4.14 4.3.3.4.15 4.3.3.4.16 4.3.3.4.17 4.3.3.5.1.2.1 4.3.3.5.1.2.2 4.3.3.5.1.2.3 4.3.3.5.1.2.4 4.3.3.5.1.2.5 4.3.3.5.1.2.6 4.3.3.5.1.2.7 4.3.3.5.1.2.8 4.3.3.5.1.2.9 4.3.3.5.1.2.10 4.3.3.5.1.2.11 4.3.3.5.1.2.12 4.3.3.5.1.2.13 4.3.3.5.1.2.14 DATE T2ITLE SOFTWARE VALIDATION TEST SYNcOR RADIATION MANAGEMENT 1*3I PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SM 1 3076 PRODUCTION k,,,f- 190 of 246 94095603VTP PLN

4.3.3.5.1.2.15 4.3.3.6.1.1.1 4.3.3.6.1.1.2 4.3.3.6.1.1.3 4.3.3.6.1.1.4 4.3.3.6.1.1.5 4.3.3.6.1.1.6 4.3.3.6.1.1.7 4.3.3.6.1.1.8 4.3.3.6.1.1.9 4.3.3.6.1.1.10 4.3.3.6.1.1.11 4.3.3.6.1.1.12 4.3.3.6.1.1.13 4.3.3.6.1.1.14 4.3.3.6.1.1.15 4.3.3.7.1 4.3.3.7.2 4.3.3.7.3 4.3.3.7.4 4.3.3.7.5 4.3.3.7.6 4.3.3.7.7 4.3.3.7.8 4.3.3.7.9 4.3.3.7.10 4.3.3.7.11 4.3.3.7.12

-4.3.3.7.13 4.3.3.7.14 4.3.3.7.15 4.3.3.7.16 4.3.3.7.17 4.3.3.7.18 4.3.3.7.19 4.3.3.8.1 4.3.3.8.2 4.3.3.8.3 4.3.3.8.4 4.3.3.8.5 4.3.3.8.6 4.3.3.8.7 4.3.3.8.8 4.3.3.8.9 4.3.3.8.10 4.3.3.8.11 DATE 1 TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 1o13/02 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET 94095603VTP 1 3076 PRODUCTION Y~E( 191 of 246 L

4.3.3.8.12 4.3.3.8.13 4.3.3.8.14 4.3.3.8.15 4.3.3.8.16 4.3.3.8.17 4.3.3.8.18 4.3.3.8.19 4.3.3.8.20 4.3.3.9.1.1.1 4.3.3.9.1.1.2 4.3.3.9.1.1.3 4.3.3.9.1.1.4 4.3.3.9.1.1.5 4.3.3.9.1.1.6 4.3.3.9.1.1.7 4.3.3.9.1.1.8 4.3.3.9.1.1.9 4.3.3.9.1.1.10 4.3.3.9.1.1.11 4.3.3.9.1.1.12 4.3.3.9.1.1.13 4.3.3.9.1.1.14 4.3.3.9.1.1.15 4.3.3.9.1.1.16 4.3.3.9.2.1.1 4.3.3.9.2.1.2 4.3.3.9.2.1.3 4.3.3.9.2.1.4 4.3.3.9.2.1.5 4.3.3.9.2.1.6 4.3.3.9.2.1.7 4.3.3.9.2.1.8 4.3.3.9.2.1.9 4.3.3.9.2.1.10 4.3.3.9.2.1.11 4.3.3.9.2.1.12 4.3.3.9.2.1.13 4.3.3.9.2.1.14 4.3.3.9.2.1.15 4.3.3.9.2.1.16 4.3.3.9.2.3 4.3.3.9.2.4 4.3.3.9.2.5 4.3.3.9.2.6 4.3.3.9.2.7 TDATE TI LE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEME 1013o2 - PROCEDURE, 9405603 DOC CTRL I SHEET No. S1ZE REV ECN NO. RELEASED FOR 1 3076 PRODUCTION 9ZWf 192 of 246 94095603VTP PLN

4.3.3.9.2.8 4.3.3.9.2.9 4.3.3.9.2.10 4.3.3.9.2.11 4.3.3.9.2.12 4.3.3.9.2.13 4.3.3.9.2.14 4.3.3.9.2.15 4.3.3.9.2.16 4.3.3.9.2.17 4.3.3.9.2.18 4.3.3.9.2.20.1 4.3.3.9.2.20.2 4.3.3.9.2.20.3 4.3.3.9.2.20.4 4.3.3.9.2.20.5 4.3.3.9.2.20.6 4.3.3.9.2.20.7 4.3.3.9.2.20.8 4.3.3.9.2.20.9 4.3.3.9.2.20.10 4.3.3.9.2.20.11 4.3.3.9.2.20.12 4.3.3.9.2.20.13 4.3.3.9.2.20.14 4.3.3.9.2.20.15 4.3.3.9.2.20.16 4.3.3.10.1.1.1 4.3.3.10.1.1.2 4.3.3.10.1.1.3 4.3.3.10.1.1.4 4.3.3.10.1.1.5 4.3.3.10.1.1.6 4.3.3.10.1.1.7 4.3.3.10.1.1.8 4.3.3.10.1.1.9 4.3.3.10.1.1.10 4.3.3.10.1.1.11 4.3.3.10.1.1.12 4.3.3.10.1.1.13 4.3.3.10.1.1.14 4.3.3.10.1.1.15 4.3.3.10.1.1.16 4.3.3.10.2.1.1 4.3.3.10.2.1.2 4.3.3.10.2.1.3 DATE 1 TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT I'o2 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO.

1 3076 PRODUCTION 9W(54f 1 193 of 246 940956PLN

4.3.3.10.2.1.4 4.3.3.10.2.1.5 4.3.3.10.2.1.6 4.3.3.10.2.1.7 4.3.3.10.2.1.8 4.3.3.10.2.1.9 4.3.3.10.2.1.10 4.3.3.10.2.1.11 4.3.3.10.2.1.12 4.3.3.10.2.1.13 4.3.3.10.2.1.14 4.3.3.10.2.1.15 4.3.3.10.2.1.16 4.3.3.10.2.3 4.3.3.10.2.4 4.3.3.10.2.5 4.3.3.10.2.6 4.3.3.10.2.7 4.3.3.10.2.8 4.3.3.10.2.9 4.3.3.10.2.10 4.3.3.10.2.11 4.3.3.10.2.12 4.3.3.10.2.13 4.3.3.10.2.14 4.3.3.10.2.15 4.3.3.10.2.16 4.3.3.10.2.17 4.3.3.10.2.18 4.3.3.11.1.1.1 4.3.3.11.1.1.2 4.3.3.11.1.1.3 4.3.3.11.1.1.4 4,3.3.11.1.1.5 4.3.3.11.1.1.6 4.3.3.11.1.1.7 4.3.3.11.1.1.8 4.3.3.11.1.1.9 4.3.3.11.1.1.10 4.3.3.11.1.1.11 4.3.3.11.1.1.12 4.3.3.11.1.1.13 4.3.3.11.1.1.14 4.3.3.11.1.1.15 4.3.3.11.1.1.16 4.3.3.11.1.3 DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIA7iON MNGEMENT lO2 PROCEDURE, 9405603 REV ECNNO. RELEASEDFOR DOCCTRL SHEET NO. SIZE 1 3076 PRODUCTION 9bY-1( 194 of 246 4903rPL

4.3.3.11.1.4 4.3.3.11.1.5 4.3.3.11.1.6 4.3.3.11.1.7 4.3.3.11.1.8 4.3.3.11.1.9 4.3.3.11.1.10 4.3.3.11.1.11 4.3.3.11.1.12 4.3.3.11.1.13 4.3.3.11.1.14 4.3.3.11.1.15 4.3.3.11.1.16 4.3.3.11.1.17 4.3.3.11.1.18 4.3.3.11.3.1 4.3.3.11.3.2 4.3.3.11.3.3 4.3.3.11.3.4 4.3.3.11.3.5 4.3.3.11.3.6 4.3.3.11.3.7 4.3.3.11.3.8 4.3.3.11.3.9 4.3.3.11.3.10 4.3.3.11.3.11 4.3.3.11.3.12 4.3.3.11.3.13 4.3.3.11.3.14 4.3.3.11.3.15 4.3.3.11.3.16 4.3.3.11.3.18 4.3.3.11.3.19 4.3.3.11.3.20 4.3.3.11.3.21 4.3.3.11.3.22 4.3.3.11.3.23 4.3.3.11.3.24 4.3.3.11.3.25 4.3.3.11.3.26 4.3.3.11.3.27 4.3.3.11.3.28 4.3.3.11.3.29 4.3.3.11.3.30 4.3.3.11.3.31 4.3.3.11.3.32 DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 10/23o2 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOG CI I 95 6 94095603VTP 1 3076 PRODUCTION EiCv~f( 195 of 246 L

4.3.3.11.3.33 4.3.3.11.5.1 4.3.3.11.5.2 4.3.3.11.5.3 4.3.3.11.5.4 4.3.3.11.5.5 4.3.3.11.5.6 4.3.3.11.5.7 4.3.3.11.5.8 4.3.3.11.5.9 4.3.3.11.5.10 4.3.3.11.5.11 4.3.3.11.5.12 4.3.3.11.5.13 4.3.3.11.5.14 4.3.3.11.5.15 4.3.3.11.5.16 4.3.3.12.2.1 4.3.3.12.2.2 4.3.3.12.2.3 4.3.3.12.2.4 4.3.3.12.2.5 4.3.3.12.2.6 4.3.3.12.2.7 4.3.3.12.2.8 4.3.3.12.2.9 4.3.3.12.2.10 4.3.3.12.2.11 4.3.3.12.2.12 4.3.3.12.2.13 4.3.3.12.2.14 4.3.3.12.2.15 4.3.3.12.2.16 4.3.3.12.4.1 4.3.3.12.4.2 4.3.3.12.4.3 4.3.3.12.4.4 4.3.3.12.4.5 4.3.3.12.4.6 4.3.3.12.4.7 4.3.3.12.4.8 4.3.3.12.4.9 4.3.3.12.4.10 4.3.3.12.4.11 4.3.3.12.4.12 4.3.3.12.4.13 D 2ATE TIT SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 1 2 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION £Md.W 196 of 246 94095603r L

I I T 4.3.3.12.4.14 4 4 +

4.3.3.12.4.15 4 4 .4.

4.3.3.12.4.16 4 I .4 4.3.3.12.4.17 4 4 4.3.3.12.4.18 I I .4 4.3.3.12.4.19 4 4 +

4.3.3.12.4.20 4 4 4.3.3.12.4.21 4 4 4 4.3.3.12.4.22 4 4 4 4.3.3.12.4.23 4 t .4 4.3.3.12.4.24 4 4 4 4.3.3.12.4.25 4 4 .4 4.3.3.12.4.26 4 4 .4 4.3.3.12.4.27 4 4 .4 4.3.3.12.4.28 4 I .4 4.3.3.12.4.29 4 4 -4 4.3.3.12.4.30 4 4 4.3.3.12.4.31 4 4 4 4.3.3.12.4.32 4 4 4.3.3.12.4.33 I I .4 4.3.3.12.6.1 4 4 4 4.3.3.12.6.2 I 4 4 4.3.3.12.6.3 4 4 4 4.3.3.12.6.4 I I 4 4.3.3.12.6.5 4 4 4 4.3.3.12.6.6 v i i 4.3.3.12.6.7 4 4 4 4.3.3.12.6.8 I I 4 4.3.3.12.6.9 4 4 4 4.3.3.12.6.10 1 I 4 4.3.3.12.6.11 4 4 4 4.3.3.12.6.12 1 I 4 4.3.3.12.6.13 4 4 4 4.3.3.12.6.14 I I I 4.3.3.12.6.15 4 4 4 4.3.3.12.6.16 L 1 4 4.3.3.13.2.1 4 4 4 4.3.3.13.2.2 I 4 4.3.3.13.2.3 4 1 4.3.3.13.2.4 I. I I 4.3.3.13.2.5 I 4 1 4.3.3.13.2.6 4.3.3.13.2.7 4.3.3.13.2.8 4.3.3.13.2.9 4.3.3.13.2.10 SOFTWARE VALIDATION TEST PROCEDURE, 9405603 -

4.3.3.13.2.11 4.3.3.13.2.12 4.3.3.13.2.13 4.3.3.13.2.14 4.3.3.13.2.15 4.3.3.13.2.16 4.3.3.13.4.1 4.3.3.13.4.2 4.3.3.13.4.3 4.3.3.13.4.4 4.3.3.13.4.5 4.3.3.13.4.6 4.3.3.13.4.7 4.3.3.13.4.8 4.3.3.13.4.9 4.3.3.13.4.10 4.3.3.13.4.11 4.3.3.13.4.12 4.3.3.13.4.13 4.3.3.13.4.14 4.3.3.13.4.15 4.3.3.13.4.16 4.3.3.13.6.1 4.3.3.13.6.2 4.3.3.13.6.3 4.3.3.13.6.4 4.3.3.13.6.5 4.3.3.13.6.6 4.3.3.13.6.7 4.3.3.13.6.8 4.3.3.13.6.9 4.3.3.13.6.10 4.3.3.13.6.11 4.3.3.13.6.12 4.3.3.13.6.13 4.3.3.13.6.14 4.3.3.13.6.15 4.3.3.13.6.16 4.3.3.13.8 4.3.3.13.9 4.3.3.13.10 4.3.3.13.11 4.3.3.13.12 4.3.3.13.13 4.3.3.13.14 4.3.3.13.15 DATE 1 TITLE SOFIWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT PROCEDURE, 9405603 REV I ECNINO. RELEASED FOR I DOC CTRL SHEET NO.

1 3076 PRODUCTION Z(ta(f 198 of 246 940956PLN

4A 51 43331 4.3.3.1 3.17 4 433.3.1

1*18 A- 31 3 4.3.3.1 3.19 43.313.1 A 4 *I1 9f I 4A -A132 453_13_21 433132 4.3.3.13.22 43.313.2 A 4 1 9 4.3.3.14.2.1 4.3.3.14.2.2 4.3.3.14.2.3 4.3.3.14.2.4 4.3.3.14.2.5 4.3.3.14.2.6 4.3.3.14.2.7 4.3.3.14.2.8 4.3.3.14.2.9 4.3.3.14.2.10 4.3.3.14.2.11 4.3.3.14.2.12 4.3.3.14.2.13 4.3.3.14.2.14 4.3.3.14.2.15 4.3.3.14.2.16 4.3.3.14.2.18 4.3.3.14.2.19 4.3.3.14.2.20 4.3.3.14.2.21 4.3.3.14.2.22 4.3.3.14.2.23 4.3.3.14.2.24 4.3.3.14.2.25 4.3.3.14.2.26 4.3.3.14.2.27 4.3.3.14.2.28 4.3.3.14.2.29 4.3.3.14.2.30 4.3.3.14.2.31 4.3.3.14.2.32 4.3.3.14.2.33 4.3.3.14.4.1 4.3.3.14.4.2 4.3.3.14.4.3 4.3.3.14.4.4 4.3.3.14.4.5 4.3.3.14.4.6 DATE l TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT I PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET 94095603VP SIZE 1 3076 PRODUCTION OZif 199 of 246 94963IPPLN

4.3.3.14.4.7 4.3.3.14.4.8 4.3.3.14.4.9 4.3.3.14.4.10 4.3.3.14.4.11 4.3.3.14.4.12 4.3.3.14.4.13 4.3.3.14.4.14 4.3.3.14.4.15 4.3.3.14.4.16 4.3.3.15.2.1 4.3.3.15.2.2 4.3.3.15.2.3 4.3.3.15.2.4 4.3.3.15.2.5 4.3.3.15.2.6 4.3.3.15.2.7 4.3.3.15.2.8 4.3.3.15.2.9 4.3.3.15.2.10 4.3.3.15.2.11 4.3.3.15.2.12 4.3.3.15.2.13 4.3.3.15.2.14 4.3.3.15.2.15 4.3.3.15.2.16 4.3.3.15.4.1 4.3.3.15.4.2 4.3.3.15.4.3 4.3.3.15.4.4 4.3.3.15.4.5 4.3.3.15.4.6 4.3.3.15.4.7 4.3.3.15.4.8 4.3.3.15.4.9 4.3.3.15.4.10 4.3.3.15.4.11 4.3.3.15.4.12 4.3.3.15.4.13 4.3.3.15.4.14 4.3.3.15.4.15 4.3.3.15.4.16 4.3.3.15.4.18 4.3.3.15.4.19 4.3.3.15.4.20 4.3.3.15.4.21 DATE TI LE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT PROCEDURE, 9405603 REV ECN NO. RELEASED FOR I DOC CTRL I 246 ZELd 94095603VSP 1 3076 1PRODUCTION 200 of 246 P4095

T T T 4.3.3.15.4*22 4.3..154.2 43.3.15.4.23 4331542 Ag ...........

I A2 4A -1 4_32315_4.25 43315425 4.3.3.15.4.26 4 3.315..2 A R I!R497

-A-+542 4A 4 32315_4.28

.3315428 4.3.3.15.4.29 4 334.33.5..2 154_30 - 4. +

4.3.3.15.4.31 43315.4.3 A 33* 1 Vl A 32 A. A3 'A -1 433 .

15.4.33 - + + t 4.3.3*16.2.1 4.3.316.2.

4 .3 3162_2 . . .. +i i 4.3.3.16.2.3

.433162.3 A4331R 94 A-- 1624 433_16.2.5

-4331625 4.3.3.16.2*6 4.3.316.2.

4_3_316.2.7

+331627 A - -4 I 9 8

4. 4 4A3_3_162.9 4.3.3.16.2.10 4.3.3.16.2.11 4.3.3.16.2.12 4.3.3.16.2.13 4.3.3.16.2.14 4.3.3.16.2.15 4.3.3.16.2.16 4.3.3.16.3 4.3.3.16.4 4.3.3.16.5 4.3.3.16.6 4.3.3.16.7 4.3.3.16.8 4.3.3.16.9 4.3.3.16.10 4.3.3.16.11 4.3.3.16.12 4.3.3.16.13 4.3.3.16.14 4.3.3.16.15 4.3.3.16.16 4.3.3.16.17 4.3.3.16.18 .

4 .3.3 .16 .19 . .. . . ....

4.3.3.16.21.1 DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 1Y32 PROCEDURE, 9405603 REV ECN NO. REOEASED FOR DOC CTRL SHEET NO. SL 1 3076 PRODUCTION ~1~( 201 of 246 94095603r L

4.3.3.16.21.2 4.3.3.16.21.3 4.3.3.16.21.4 4.3.3.16.21.5 4.3.3.16.21.6 4.3.3.16.21.7 4.3.3.16.21.8 4.3.3.16.21.9 4.3.3.16.21.10 4.3.3.16.21.11 4.3.3.16.21.12 4.3.3.16.21.13 4.3.3.16.21.14 4.3.3.16.21.15 4.3.3.16.21.16 4.3.3.16.21.18 4.3.3.16.21.19 4.3.3.16.21.20 4.3.3.16.21.21 4.3.3.16.21.22 4.3.3.16.21.23 4.3.3.16.21.24 4.3.3.16.21.25 4.3.3.16.21.26 4.3.3.16.21.27 4.3.3.16.21.28 4.3.3.16.21.29 4.3.3.16.21.30 4.3.3.16.21.31 4.3.3.16.21.32 4.3.3.16.21.33 4.3.3.16.23.1 4.3.3.16.23.2 4.3.3.16.23.3 4.3.3.16.23.4 4.3.3.16.23.5 4.3.3.16.23.6 4.3.3.16.23.7 4.3.3.16.23.8 4.3.3.16.23.9 4.3.3.16.23.10 4.3.3.16.23.11 4.3.3.16.23.12 4.3.3.16.23.13 4.3.3.16.23.14 4.3.3.16.23.15 DATE TITLE-SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 10/23102 PROCEDURE, 9405603 REV EON NO. RELEASED FOR DOG CTRL SHEET of SIZE 11 3076 1PRODUCTION 1 202 of 246 9053VPPLN

4.3.3.16.23.16 4.3.3.16.25.1 4.3.3.16.25.2 4.3.3.16.25.3 4.3.3.16.25.4 4.3.3.16.25.5 4.3.3.16.25.6 4.3.3.16.25.7 4.3.3.16.25.8 4.3.3.16.25.9 4.3.3.16.25.10 4.3.3.16.25.11 4.3.3.16.25.12 4.3.3.16.25.13 4.3.3.16.25.14 4.3.3.16.25.15 4.3.3.16.25.16 4.3.3.17.2.1 4.3.3.17.2.2 4.3.3.17.2.3 4.3.3.17.2.4 4.3.3.17.2.5 4.3.3.17.2.6 4.3.3.17.2.7 4.3.3.17.2.8 4.3.3.17.2.9 4.3.3.17.2.10 4.3.3.17.2.11 4.3.3.17.2.12 4.3.3.17.2.13 4.3.3.17.2.14 4.3.3.17.2.15 4.3.3.17.2.16 4.3.3.17.4.1 4.3.3.17.4.2 4.3.3.17.4.3 4.3.3.17.4.4 4.3.3.17.4.5 4.3.3.17.4.6 4.3.3.17.4.7 4.3.3.17.4.8 4.3.3.17.4.9 4.3.3.17.4.10 4.3.3.17.4.11 4.3.3.17.4.12 4.3.3.17.4.13 DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 101,3o2 PROCEDURE, 9405603 DOG CTRL SHEET NO. E 3 NSIZE REV ECN No. RELEASED FOR 1 30761 PRODUCTION 64(f 203 of 246 9053VPPLN

4.3.3.17.4.14 4.3.3.17.4.15 4.3.3.17.4.16 4.3.3.17.4.18 4.3.3.17.4.19 4.3.3.17.4.20 4.3.3.17.4.21 4.3.3.17.4.22 4.3.3.17.4.23 4.3.3.17.4.24 4.3.3.17.4.25 4.3.3.17.4.26 4.3.3.17.4.27 4.3.3.17.4.28 4.3.3.17.4.29 4.3.3.17.4.30 4.3.3.17.4.31 4.3.3.17.4.32 4.3.3.17.4.33 4.3.3.17.6.1 4.3.3.17.6.2 4.3.3.17.6.3 4.3.3.17.6.4 4.3.3.17.6.5 4.3.3.17.6.6 4.3.3.17.6.7 4.3.3.17.6.8 4.3.3.17.6.9 4.3.3.17.6.10 4.3.3.17.6.11 4.3.3.17.6.12 4.3.3.17.6.13 4.3.3.17.6.14 4.3.3.17.6.15 4.3.3.17.6.16 4.3.3.17.8.1 4.3.3.17.8.2 4.3.3.17.8.3 4.3.3.17.8.4 4.3.3.17.8.5 4.3.3.17.8.6 4.3.3.17.8.7 4.3.3.17.8.8 4.3.3.17.8.9 4.3.3.17.8.10 4.3.3.17.8.11 DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 'or/C2 PROCEDURE, 9405603 DOG CTRL SHEET NO. SIZE REV ECN NO. RELEASED FOR 1 30)76] PRODUCTION 1 Z.041WL204 of 246PL

4.3.3.17.8.12 4.3.3.17.8.13 4.3.3.17.8.14 4.3.3.17.8.15 4.3.3.17.8.16 4.3.3.18.2.1 4.3.3.18.2.2 4.3.3.18.2.3 4.3.3.18.2.4 4.3.3.18.2.5 4.3.3.18.2.6 4.3.3.18.2.7 4.3.3.18.2.8 4.3.3.18.2.9 4.3.3.18.2.10 4.3.3.18.2.11 4.3.3.18.2.12 4.3.3.18.2.13 4.3.3.18.2.14 4.3.3.18.2.15 4.3.3.18.2.16 4.3.3.18.4.1 4.3.3.18.4.2 4.3.3.18.4.3 4.3.3.18.4.4 4.3.3.18.4.5 4.3.3.18.4.6 4.3.3.18.4.7 4.3.3.18.4.8 4.3.3.18.4.9 4.3.3.18.4.10 4.3.3.18.4.11 4.3.3.18.4.12 4.3.3.18.4.13 4.3.3.18.4.14 4.3.3.18.4.15 4.3.3.18.4.16 4.3.3.18.6.1 4.3.3.18.6.2 4.3.3.18.6.3 4.3.3.18.6.4 4.3.3.18.6.5 4.3.3.18.6.6 4.3.3.18.6.7 4.3.3.18.6.8 4.3.3.18.6.9 SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT PROCEDURE, 9405603 SIZE REVI1 1 ECN 3076NO. 94095603VTP PLN

4.3.3.18.6.10 4.3.3.18.6.11 4.3.3.18.6.12 4.3.3.18.6.13 4.3.3.18.6.14 4.3.3.18.6.15 4.3.3.18.6.16 4.3.3.18.6.18 4.3.3.18.6.19 4.3.3.18.6.20 4.3.3.18.6.21 4.3.3.18.6.22 4.3.3.18.6.23 4.3.3.18.6.24 4.3.3.18.6.25 4.3.3.18.6.26 4.3.3.18.6.27 4.3.3.18.6.28 4.3.3.18.6.29 4.3.3.18.6.30 4.3.3.18.6.31 4.3.3.18.6.32 4.3.3.18.6.33 4.3.3.18.8.1 4.3.3.18.8.2 4.3.3.18.8.3 4.3.3.18.8.4 4.3.3.18.8.5 4.3.3.18.8.6 4.3.3.18.8.7 4.3.3.18.8.8 4.3.3.18.8.9 4.3.3.18.8.10 4.3.3.18.8.11 4.3.3.18.8.12 4.3.3.18.8.13 4.3.3.18.8.14 4.3.3.18.8.15 4.3.3.18.8.16 4.3.3.19.2.1 4.3.3.19.2.2 4.3.3.19.2.3 4.3.3.19.2.4 4.3.3.19.2.5 4.3.3.19.2.6 4.3.3.19.2.7 DATE TITLE SOFTWARE VALDATION TEST SYNCOR RADIATION MANAGEMENT 1o/3/02 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET TN.SZ 1 3076 PRODUCTION ,v1f.'Yft 206 of 246 PLN

4.3.3.19.2.8 4.3.3.19.2.9 I 4.3.3.19.2.10 4.3.3.19.2.11 4.3.3.19.2.12 4.3.3.19.2.13 4.3.3.19.2.14 4.3.3.19.2.15 4.3.3.19.2.16 4.3.3.19.4.1 4.3.3.19.4.2 4.3.3.19.4.3 4.3.3.19.4.4 4.3.3.19.4.5 4.3.3.19.4.6 4.3.3.19.4.7 4.3.3.19.4.8 4.3.3.19.4.9 4.3.3.19.4.10 4.3.3.19.4.11 4.3.3.19.4.12 4.3.3.19.4.13 4.3.3.19.4.14 4.3.3.19.4.15 4.3.3.19.4.16 4.3.3.19.6.1 4.3.3.19.6.2 4.3.3.19.6.3 4.3.3.19.6.4 4.3.3.19.6.5 4.3.3.19.6.6 4.3.3.19.6.7 4.3.3.19.6.8 4.3.3.19.6.9 4.3.3.19.6.10 4.3.3.19.6.11 4.3.3.19.6.12 4.3.3.19.6.13 4.3.3.19.6.14 4.3.3.19.6.15 4.3.3.19.6.16 4.3.3.19.8.1 4.3.3.19.8.2 4.3.3.19.8.3 4.3.3.19.8.4 4.3.3.19.8.5 DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 1o2o2 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION .?,Y-r- 207 of 246 94095603VTP PLN

AR I QR A A 'A'+1 4_33.19.8.7 43398 4.3.3.19.8.8 4.33.1.8.

4R 1.R 433198 4.33.19.8.10 .1 43 19 A 'A %1Q A 11

....... I I +

A Dr~ Ig U .. 12 43319812 4.3.3.19.8.13 4 4 a14 4 R ~lq 4.3.3.19.8.15 4.3.3.19.8.16 4.3.3.19.10 4.3.3.19.11 4.3.3.19.12 4.3.3.19.13 4.3.3.19.14 4.3.3.19.15 4.3.3.19.16 4.3.3.19.17 4.3.3.19.18 4.3.3.19.19 4.3.3.19.20 4.3.3.19.21 4.3.3.19.22 4.3.3.19.23 4.3.3.19.24 4.3.3.19.25 4.3.3.20.2.1 4.3.3.20.2.2 4.3.3.20.2.3 4.3.3.20.2.4 4.3.3.20.2.5 4.3.3.20.2.6 4.3.3.20.2.7 4.3.3.20.2.8 4.3.3.20.2.9 4.3.3.20.2.10 4.3.3.20.2.11 4.3.3.20.2.12 4.3.3.20.2.13 4.3.3.20.2.14 4.3.3.20.2.15 4.3.3.20.2.16 4.3.3.20.4 4.3.3.20.5 4.3.3.20.6 DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 10t23/02 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 3076 PRODUCTION ,.,-'t 208 of 246 PLN

4.3.3.20.7 4.3.3.20.8 4.3.3.20.9 4.3.3.20.10 4.3.3.20.11 4.3.3.20.12 4.3.3.20.13 4.3.3.20.14 4.3.3.20.15 4.3.3.20.16 4.3.3.20.17 4.3.3.20.18 4.3.3.20.19 4.3.3.20.21.1 4.3.3.20.21.2 4.3.3.20.21.3 4.3.3.20.21.4 4.3.3.20.21.5 4.3.3.20.21.6 4.3.3.20.21.7 4.3.3.20.21.8 4.3.3.20.21.9 4.3.3.20.21.10 4.3.3.20.21.11 4.3.3.20.21.12 4.3.3.20.21.13 4.3.3.20.21.14 4.3.3.20.21.15 4.3.3.20.21.16 4.3.3.20.23.1 4.3.3.20.23.2 4.3.3.20.23.3 4.3.3.20.23.4 4.3.3.20.23.5 4.3.3.20.23.6' 4.3.3.20.23.7 4.3.3.20.23.8 4.3.3.20.23.9 4.3.3.20.23.10 4.3.3.20.23.11 4.3.3.20.23.12 4.3.3.20.23.13 4.3.3.20.23.14 4.3.3.20.23.15 4.3.3.20.23.16 4.3.3.21.2.1 DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET 1 3076 PRODUCTION I loQW(1 209 of 246 1 PLN

.7 I 4.3.3.21.2.2 433212.2

4. R9 1 9*

A 1 3 3 4.3.321 .2.4 433 12.4 4.3.3.21.2.5 4.33.2.2.

4R29I . 2_6. 4I- +

4.3.3.21.2.7 43312.

A. R '491 R A -4 A+1 4 33_21 .9.

433212 4.3.3.21.2.10 4.3..212.1 4 :*33212.11 4332121 4.3.3.21.2.12 4.3.3.21.2.13 4.3.3.21.2.14 4.3.3.21.2.15 4.3.3.21.2.16 4.3.3.21.4.1 4.3.3.21.4.2 4.3.3.21.4.3 4.3.3.21.4.4 4.3.3.21.4.5 4.3.3.21.4.6 4.3.3.21.4.7 4.3.3.21.4.8 4.3.3.21.4.9 4.3.3.21.4.10 4.3.3.21.4.11 4.3.3.21.4.12 4.3.3.21.4.13 4.3.3.21.4.14 4.3.3.21.4.15 4.3.3.21.4.16 4.3.3.21.6 4.3.3.21.7 4.3.3.21.8 4.3.3.21.9 4.3.3.21.10 4.3.3.21.11 4.3.3.21.12 4.3.3.21.13 4.3.3.21.14 4.3.3.21.15 4.3.3.21.16 4.3.3.21.17 4.3.3.21.18 4.3.3.21.19 4.3.3.21.20 DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET O . SIZE 1 3076 1PRODUCTION I 9b;W 210 of 246 4903TPL

4.3.3.21.21 4.3.3.21.23.1 4.3.3.21.23.2 4.3.3.21.23.3 4.3.3.21.23.4 4.3.3.21.23.5 4.3.3.21.23.6 4.3.3.21.23.7 4.3.3.21.23.8 4.3.3.21.23.9 4.3.3.21.23.10 4.3.3.21.23.11 4.3.3.21.23.12 4.3.3.21.23.13 4.3.3.21.23.14 4.3.3.21.23.15 4.3.3.21.23.16 4.3.3.22.2.1 4.3.3.22.2.2 4.3.3.22.2.3 4.3.3.22.2.4 4.3.3.22.2.5 4.3.3.22.2.6 4.3.3.22.2.7 4.3.3.22.2.8 4.3.3.22.2.9 4.3.3.22.2.10 4.3.3.22.2.11 4.3.3.22.2.12 4.3.3.22.2.13 4.3.3.22.2.14 4.3.3.22.2.15 4.3.3.22.2.16 4.3.3.22.4.1 4.3.3.22.4.2 4.3.3.22.4.3 4.3.3.22.4.4, 4.3.3.22.4.5 4.3.3.22.4.6 4.3.3.22.4.7 4.3.3.22.4.8

- 4.3.3.22.4.9 4.3.3.22.4.10 4.3.3.22.4.11 4.3.3.22.4.12 4.3.3.22.4.13 DATE - TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 1*3/o2 PROCEDURE, 9405603 REV 1

ECN NO.

3076 RELEASED FOR PRODUCTION DOC CTRL OZI/W SHEET 211 of 246 NO. I'SIZE PLN II

4.3.3.22.4.14 4.3.3.22.4.15 4.3.3.22.4.16 4.3.3.22.6.1 4.3.3.22.6.2 4.3.3.22.6.3 4.3.3.22.6.4 4.3.3.22.6.5 4.3.3.22.6.6 4.3.3.22.6.7 4.3.3.22.6.8 4.3.3.22.6.9 4.3.3.22.6.10 4.3.3.22.6.11 4.3.3.22.6.12 4.3.3.22.6.13 4.3.3.22.6.14 4.3.3.22.6.15 4.3.3.22.6.16 4.3.3.22.8 4.3.3.22.9 4.3.3.22.10 4.3.3.22.11 4.3.3.22.12 4.3.3.22.13 4.3.3.22.14 4.3.3.22.15 4.3.3.22.16 4.3.3.22.17 4.3.3.22.18 4.3.3.22.19 4.3.3.22.20 4.3.3.22.21 4.3.3.22.22 4.3.3.22.23 4.3.3.23.2.1 4.3.3.23.2.2 4.3.3.23.2.3 4.3.3.23.2.4 4.3.3.23.2.5 4.3.3.23.2.6 4.3.3.23.2.7 4.3.3.23.2.8 4.3.3.23.2.9 4.3.3.23.2.10 4.3.3.23.2.11 DATE 0 TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 10/23... PROCEDURE, 9405603 STLE DOC SHEET NO.

SREV ECN NO. RELEASED FOR 1 212 of 246 94095603VTP PLN 1 3076 PRODUCTION ,ZYM%

1 f 4.33.23.2.12 43323.2.1 4 3 V3 93i 213 A'q 33 2 1 4 p .. 23......

43323.2.14 4.3.3.23.2.15 4.3.3.23.2.16 4.3.3.23.4.1 4.3.3.23.4.2 4.3.3.23.4.3 4.3.3.23.4.4 4.3.3.23.4.5 4.3.3.23.4.6 4.3.3.23.4.7 4.3.3.23.4.8 4.3.3.23.4.9 4.3.3.23.4.10 4.3.3.23.4.11 4.3.3.23.4.12 4.3.3.23.4.13 4.3.3.23.4.14 4.3.3.23.4.15 4.3.3.23.4.16 4.3.3.23.5 4.3.3.23.6.1 4.3.3.23.6.2 4.3.3.23.6.3 4.3.3.23.6.4 4.3.3.23.6.5 4.3.3.23.6.6 4.3.3.23.6.7 4.3.3.23.6.8 4.3.3.23.6.9 4.3.3.23.6.10 4.3.3.23.6.11 4.3.3.23.6.12 4.3.3.23.6.13 4.3.3.23.6.14 4.3.3.23.6.15 4.3.3.23.6.16 4.3.3.23.8.1 4.3.3.23.8.2 4.3.3.23.8.2 4.3.3.23.8.4 4.3.3.23.8.5 4.3.3.23.8.6 DATE TrTLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 1 1/32 PROCEDURE, 9405603 REV EN NO. RELEASED FOR DOC CTRL SHEET NO. 94095603VTP 1 :3076 PRODUCTION 213 1~( of246 PIN

4.3.3.23.8.7 4.3.3.23.8.8 4.3.3.23.8.9 4.3.3.23.8.10 4.3.3.23.8.11 4.3.3.23.8.12 4.3.3.23.8.13 4.3.3.23.8.14 4.3.3.23.8.15 4.3.3.23.8.16 4.3.3.24.2.1 4.3.3.24.2.2 4.3.3.24.2.3 4.3.3.24.2.4 4.3.3.24.2.5 4.3.3.24.2.6 4.3.3.24.2.7 4.3.3.24.2.8 4.3.3.24.2.9 4.3.3.24.2.10 4.3.3.24.2.11 4.3.3.24.2.12 4.3.3.24.2.13 4.3.3.24.2.14 4.3.3.24.2.15 4.3.3.24.2.16 4.3.3.24.4 4.3.3.24.5 4.3.3.24.6 4.3.3.24.7 4.3.3.24.8 4.3.3.24.9 4.3.3.24.10 4.3.3.24.11 4.3.3.24.12 4.3.3.24.13 4.3.3.24.14 4.3.3.24.15 4.3.3.24.16 4.3.3.24.17 4.3.3.24.18 4.3.3.24.19 _

4.3.3.24.22.1 4.3.3.24.22.2 4.3.3.24.22.3 SOFTWARE VALIDATION TEST

-SYNCOR RADIATION MANAGEMENT PROCEDURE, 9405603 SIZE RIVECNNO.

11 3076 94095603VTP PLN

A 3 4 4 994 22 .4 4.33.24.22.5 4.33422 A 3 3 94 22 99R .6 4.3.324.22.7 3 24 .22.7 A 339499 3 22 .8R 434_22.9 3 22 .9 43.3.24.22.10 43342.1 A 33949911 24 .11 433_24_22.12 3 24 .2212 4.3.3.24.22.13 4..324221 4 3 3 3 492_14 22 .14 43.3.24.22.15

4. . .2422.15 4 33 492_1622 .16 43.3.252.1 A 3 3 9 25 9 .2 433_25_2.3 25 .3 4.33.25.2.4 433.5.2.

A IV V 95 9 5 43_325.26 25 .2. 5 A

.3VO.3252.6 I*95 9 43 3 252. 7 43.3.25.2.8

-433252.8-A *D I* O9 43.3.25.2.10

.32529 A Vl @*

.252.10 95 9 1

.25 11 4 3_3.25.212 A i-2325212 91

. 25 2 13 4_3.3.25.2.14 A 33 959

.252141 5 44.3.325.2.16 25 2. 15 A ......

.25216 4.3.325.4.2

.2541.

A. 3.3v .2542 95 A 4.3. .25.4.4 4.3.3.25.4.4 4.3.3.25.4.75_______

4.3.3.25.4.6 4.3.3.'25.4.7 4.3.3.625.04.1 8________ ________

4.3.3.25.4.119______ __________

4.3.3.25.4.120__________________

4.3.3.25.4.131__________________

4.3.3.25.4.143_ _ _ _ _ _ _ ___________

4.3.3.25.4.15__ _ _ _ _ _ _ _____ ______

4.3.3.25.4.16 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

4.3.3.25.7 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _______ ____

DATE 1 TITLE SOFTWARE VALIDATION TEST SYNCOR-RADIATION MANAGEMENT PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET 94095603VTP 1 3076 PRODUCTION 9?,'i4 215 of 246 PLN

4.3.3.25.8 4.3.3.25.9 4.3.3.25.10 4.3.3.25.11 4.3.3.25.12 4.3.3.25.13 4.3.3.25.14 4.3.3.25.15 4.3.3.25.16 4.3.3.25.17 4.3.3.25.18 4.3.3.25.19 4.3.3.25.20 4.3.3.25.21 4.3.3.25.22 4.3.3.26.2.1 4.3.3.26.2.2 4.3.3.26.2.3 4.3.3.26.2.4 4.3.3.26.2.5 4.3.3.26.2.6 4.3.3.26.2.7 4.3.3.26.2.8 4.3.3.26.2.9 4.3.3.26.2.10 4.3.3.26.2.11 4.3.3.26.2.12 4.3.3.26.2.13 4.3.3.26.2.14 4.3.3.26.2.15 4.3.3.26.2.16 4.3.3.26.4.1 4.3.3.26.4.2 4.3.3.26.4.3 4.3.3.26.4.4 4.3.3.26.4.5 4.3.3.26.4.6 4.3.3.26.4.7 4.3.3.26.4.8 4.3.3.26.4.9 4.3.3.26.4.10 4.3.3.26.4.11 4.3.3.26.4.12 4.3.3.26.4.13 4.3.3.26.4.14 4.3.3.26.4.15 DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 1231o2 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL ISHEET SIZE 763076 PRODUCTION 1 )94-' 216 of 246 PLN

r I I A gA A1R A l9r- 16I 4aa2Ri6 433266 4.3.326.7 43.3.26.

A VI4 Wm A- 6 3 3 4 a a_'s 4.3.3.26.10 4.3.3.26.11 4.3.3.26.12 4.3.3.26.13 4.3.3.26.14 4.3.3.26.15 4.3.3.26.16 4.3.3.26.17 4.3.3.26.18 4.3.3.26.19 4.3.3.26.20 4.3.3.26.21 4.3.3.26.24.1 4.3.3.26.24.2 4.3.3.26.24.3 4.3.3.26.24.4 4.3.3.26.24.5 4.3.3.26.24.6 4.3.3.26.24.7 4.3.3.26.24.8 4.3.3.26.24.9 4.3.3.26.24.10 4.3.3.26.24.11 4.3.3.26.24.12 4.3.3.26.24.13 4.3.3.26.24.14 4.3.3.26.24.15 4.3.3.26.24.16 4.3.3.27.2.1 4.3.3.27.2.2 4.3.3.27.2.3 4.3.3.27.2.4 4.3.3.27.2.5 4.3.3.27.2.6 4.3.3.27.2.7 4.3.3.27.2.8

[4.3.3.27.2.9 4.3.3.27.2.10 4.3.3.27.2.11 4.3.3.27.2.12 4.3.3.27.2.13 DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT I 1023M02 - PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRLI SHEET NO. SIZE 163076 PRODUCTION .9Z%/Z.W" 217 of 246 PLN

4.3.3.27.2.14 4.3.3.27.2.15 4.3.3.27.2.16 4.3.3.27.4.1 4.3.3.27.4.2 4.3.3.27.4.3 4.3.3.27.4.4 4.3.3.27.4.5 4.3.3.27.4.6 4.3.3.27.4.7 4.3.3.27.4.8 4.3.3.27.4.9 4.3.3.27.4.10 4.3.3.27.4.11 4.3.3.27.4.12 4.3.3.27.4.13 4.3.3.27.4.14 4.3.3.27.4.15 4.3.3.27.4.16 4.3.3.27.6.1 4.3.3.27.6.2 4.3.3.27.6.3 4.3.3.27.6.4 4.3.3.27.6.5 4.3.3.27.6.6 4.3.3.27.6.7 4.3.3.27.6.8 4.3.3.27.6.9 4.3.3.27.6.10 4.3.3.27.6.11 4.3.3.27.6.12 4.3.3.27.6.13 4.3.3.27.6.14 4.3.3.27.6.15 4.3.3.27.6.16 4.3.3.27.9 4.3.3.27.10 4.3.3.27.11 4.3.3.27.12 4.3.3.27.13 4.3.3.27.14 4.3.3.27.15 4.3.3.27.16 4.3.3.27.17 4.3.3.27.18 4.3.3.27.19 DATE 10 TLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 1232 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET 94095603VTP SIZE 1 3076 PRODUCTION %1( 218 of 246 PLN

4.3.3.27.20 4.3.3.27.21 4.3.3.27.22 4.3.3.27.23 4.3.3.27.24 4.3.3.28.2.1 4.3.3.28.2.2 4.3.3.28.2.3 4.3.3.28.2.4 4.3.3.28.2.5 4.3.3.28.2.6 4.3.3.28.2.7 4.3.3.28.2.8 4.3.3.28.2.9 4.3.3.28.2.10 4.3.3.28.2.11 4.3.3.28.2.12 4.3.3.28.2.13 4.3.3.28.2.14 4.3.3.28.2.15 4.3.3.28.2.16 4.3.3.28.4.1 4.3.3.28.4.2 4.3.3.28.4.3 4.3.3.28.4.4 4.3.3.28.4.5 4.3.3.28.4.6 4.3.3.28.4.7 4.3.3.28.4.8 4.3.3.28.4.9 4.3.3.28.4.10 4.3.3.28.4.11 4.3.3.28.4.12 4.3.3.28.4.13 4.3.3.28.4.14 4.3.3.28.4.15 4.3.3.28.4.16 4.3.3.28.6.1 4.3.3.28.6.2 4.3.3.28.6.3 4.3.3.28.6.4 4.3.3.28.6.5 4.3.3.28.6.6 4.3.3.28.6.7 4.3.3.28.6.8 4.3.3.28.6.9 DATE TITLE SOFTWARE VALIDATION TEST SYNCORRADIATION MANAGEMENT 10/23M2 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO.

1 3076 PRODUCTION &4'1U( 219 of 246 94095603VTPPLN

4.3.3.28.6.10 4.3.3.28.6.11 4.3.3.28.6.12 4.3.3.28.6.13 4.3.3.28.6.14 4.3.3.28.6.15 4.3.3.28.6.16 4.3.3.28.9 4.3.3.28.10 4.3.3.28.11 4.3.3.28.12 4.3.3.28.13 4.3.3.28.14 4.3.3.28.15 4.3.3.28.16 4.3.3.28.17 4.3.3.28.18 4.3.3.28.19 4.3.3.28.20 4.3.3.28.21 4.3.3.28.22 4.3.3.28.23 4.3.3.28.24 4.3.3.28.27.1 4.3.3.28.27.2 4.3.3.28.27.3 4.3.3.28.27.4 4.3.3.28.27.5 4.3.3.28.27.6 4.3.3.28.27.7 4.3.3.28.27.8 4.3.3.28.27.9 4.3.3.28.27.10 4.3.3.28.27.11 4.3.3.28.27.12 4.3.3.28.27.13 4.3.3.28.27.14 4.3.3.28.27.15 4.3.3.28.27.16 4.3.3.29.2.1 4.3.3.29.2.2 4.3.3.29.2.3 4.3.3.29.2.4 4.3.3.29.2.5 4.3.3.29.2.6 4.3.3.29.2.7 DATE TI LE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 1013102 PROCEDURE, 9405603 REV EN NO. RELEASED FOR DOC CTRL SHEET NO. 94095603VP SE 1 3076 PRODUCTION MI/ 220 of 246 PLN

4.3.3.29.2.8 4.3.3.29.2.9 4.3.3.29.2.10 4.3.3.29.2.11 4.3.3.29.2.12 4.3.3.29.2.13 4.3.3.29.2.14 4.3.3.29.2.15 4.3.3.29.2.16 4.3.3.29.4.1 4.3.3.29.4.2 4.3.3.29.4.3 4.3.3.29.4.4 4.3.3.29.4.5 4.3.3.29.4.6 4.3.3.29.4.7 4.3.3.29.4.8 4.3.3.29.4.9 4.3.3.29.4.10 4.3.3.29.4.11 4.3.3.29.4.12 4.3.3.29.4.13 4.3.3.29.4.14 4.3.3.29.4.15 4.3.3.29.4.16 4.3.3.29.6.1 4.3.3.29.6.2 4.3.3.29.6.3 4.3.3.29.6.4 4.3.3.29.6.5 4.3.3.29.6.6 4.3.3.29.6.7 4.3.3.29.6.8 4.3.3.29.6.9 4.3.3.29.6.10 4.3.3.29.6.11 4.3.3.29.6.12 4.3.3.29.6.13 4.3.3.29.6.14 4.3.3.29.6.15 4.3.3.29.6.16 4.3.3.29.8.1 4.3.3.29.8.2 4.3.3.29.8.3 4.3.3.29.8.4 4.3.3.29.8.5 DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT --10/23/02 - PROCEDURE, 9405603 DOC CTRL SHEET NO. SIZE REV ECN NO. RELEASED FOR

,'*,( 221 of 246 94095603VTP PLN 3076 PRODUCTION

T A 2 VhV v~

A3398 A 2 QR 7 A q 'a9QJR A 2"2 9"4O 88 A 'A ' 29 8 A "2 2* "Q R A90R1 +Z A 22 9QR1f Ai 'A A ') R 4 298.11 433981 A 22 0R 19 A'A '0A'I 1 A 22 9*VQ8 13 Al 1 -4 9 8 A 2 'O %RIA

. .. I I A 'I2' 9Q R 1-1;

_____________I 4 A 22@* D ... 6 A 16 3329 A 'A I ,) 11 T.J.% J.. S 4

__________________________________________________ I A 22 9Q 19 4.3.3.29.13 4.3.3.29.14 4.3.3.29.15 4.3.3.29.16 4.3.3.29.17 4.3.3.29.18 4.3.3.29.19 4.3.3.29.20 4.3.3.29.21 4.3.3.29.22 4.3.3.29.23 4.3.3.29.24 4.3.3.29.25 4.3.3.29.26 4.3.3.30.2.1 4.3.3.30.2.2 4.3.3.30.2.3 4.3.3.30.2.4 4.3.3.30.2.5 4.3.3.30.2.6 4.3.3.30.2.7 4.3.3.30.2.8 4.3.3.30.2.9 4.3.3.30.2.10 4.3.3.30.2.11 4.3.3.30.2.12 4.3.3.30.2.13 4.3.3.30.2.14 4.3.3.30.2.15 4.3.3.30.2.16 4.3.3.30.4.1 4.3.3.30.4.2 4.3.3.30.4.3 DATE 1 TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 1I3Io2 PROCEDURE, 9405603 EN No. RELEASED FOR DOC CTRL SHEET 94095603vrP SIZE REV 1 3076 PRODUCTION 222 of 246 2~~ PLN

4.3.3.30.4.4 4.3.3.30.4.5 4.3.3.30.4.6 4.3.3.30.4.7 4.3.3.30.4.8 4.3.3.30.4.9 4.3.3.30.4.10 4.3.3.30.4.11 4.3.3.30.4.12 4.3.3.30.4.13 4.3.3.30.4.14 4.3.3.30.4.15 4.3.3.30.4.16 4.3.3.30.6 4.3.3.30.7 4.3.3.30.8 4.3.3.30.9 4.3.3.30.10 4.3.3.30.11 4.3.3.30.12 4.3.3.30.13 4.3.3.30.14 4.3.3.30.15 4.3.3.30.16 4.3.3.30.17 4.3.3.30.18 4.3.3.30.19 4.3.3.30.20 4.3.3.30.21 4.3.3.30.24.1 4.3.3.30.24.2 4.3.3.30.24.3 4.3.3.30.24.4 4.3.3.30.24.5 4.3.3.30.24.6 4.3.3.30.24.7 4.3.3.30.24.8 4.3.3.30.24.9 4.3.3.30.24.10 4.3.3.30.24.11 4.3.3.30.24.12 4.3.3.30.24.13 4.3.3.30.24.14 4.3.3.30.24.15 4.3.3.30.24.16 4.3.3.31.2.1 DATE M TITLE SOFTWARE VALIDATION TEST SYNCORRADIATION MANAGEMENT PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET 94095603VP SIZE 11 3076 PRODUCTION I adbW 223 of 246 1PLN

4.3.3.31.2.2 4.3.3.31.2.3 4.3.3.31.2.4 4.3.3.31.2.5 4.3.3.31.2.6 4.3.3.31.2.7 4.3.3.31.2.8 4.3.3.31.2.9 4.3.3.31.2.10 4.3.3.31.2.11 4.3.3.31.2.12 4.3.3.31.2.13 4.3.3.31.2.14 4.3.3.31.2.15 4.3.3.31.2.16 4.3.3.31.4.1 4.3.3.31.4.2 4.3.3.31.4.3 4.3.3.31.4.4 4.3.3.31.4.5 4.3.3.31.4.6 4.3.3.31.4.7 4.3.3.31.4.8 4.3.3.31.4.9 4.3.3.31.4.10 4.3.3.31.4.11 4.3.3.31.4.12 4.3.3.31.4.13 4.3.3.31.4.14 4.3.3.31.4.15 4.3.3.31.4.16" 4.3.3.31.6.1 4.3.3.31.6.2 4.3.3.31.6.3 4.3.3.31.6.4 4.3.3.31.6.5 4.3.3.31.6.6 4.3.3.31.6.7 4.3.3.31.6.8 4.3.3.31.6.9 4.3.3.31.6.10 4.3.3.31.6.11 4.3.3.31.6.12 4.3.3.31.6.13 4.3.3.31.6.14 4.3.3.31.6.15 SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT PROCEDURE, 9405603 NO. SIZE R0CN NO.

94095603V'P PLN

4.3.3.31.6.16 4.3.3.31.9 4.3.3.31.10 4.3.3.31.11 4.3.3.31.12 4.3.3.31.13 4.3.3.31.14 4.3.3.31.15 4.3.3.31.16 4.3.3.31.17 4.3.3.31.18 4.3.3.31.19 4.3.3.31.20 4.3.3.31.21 4.3.3.31.22 4.3.3.31.23 4.3.3.31.24 4.3.3.32.3.1 4.3.3.32.3.2 4.3.3.32.3.3 4.3.3.32.3.4 4.3.3.32.3.5 4.3.3.32.3.6 4.3.3.32.3.7 4.3.3.32.3.8 4.3.3.32.3.9 4.3.3.32.3.10 4.3.3.32.3.11 4.3.3.32.3.12 4.3.3.32.3.13 4.3.3.32.3.14 4.3.3.32.3.15 4.3.3.32.3.16 4.3.3.32.5.1 4.3.3.32.5.2 4.3.3.32.5.3 4.3.3.32.5.4 4.3.3.32.5.5 4.3.3.32.5.6 4.3.3.32.5.7 4.3.3.32.5.8 4.3.3.32.5.9 4.3.3.32.5.10 4.3.3.32.5.11 4.3.3.32.5.12 4.3.3.32.5.13 SOFTWARE VALIDATION TEST SYNcOR RADIATlION MANAGEMENT -PROCEDURE, 9405603 REV ECN NO.

1 I 3076

4.3.3.32.5.14 4.3.3.32.5.15 4.3.3.32.5.16 4.3.3.32.8.1 4.3.3.32.8.2 4.3.3.32.8.3 4.3.3.32.8.4 4.3.3.32.8.5 4.3.3.32.8.6 4.3.3.32.8.7 _

4.3.3.32.8.8 4.3.3.32.8.9 4.3.3.32.8.10 4.3.3.32.8.11 4.3.3.32.8.12 4.3.3.32.8.13 4.3.3.32.8.14 4.3.3.32.8.15 4.3.3.32.8.16 4.3.3.33.2 4.3.3.33.3 4.3.3.33.4 4.3.3.33.5 4.3.3.33.6 4.3.3.33.7 4.3.3.33.8 4.3.3.33.9 4.3.3.33.10 4.3.3.33.11 4.3.3.33.12 4.3.3.33.13 4.3.3.33.14 4.3.3.33.15 4.3.3.33.16 4.3.3.33.17 4.3.3.33.19 4.3.3.33.20 4.3.3.33.21 4.3.3.33.22 4.3.3.33.23 4.3.3.33.24 4.3.3.33.25 4.3.3.33.26 4.3.3.33.27 4.3.3.33.28 4.3.3.33.29 DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT I3/o2 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 3076 PRODUCTION ,,'( 226 of 246 94095603V1"P PLN

4.3.3.33.30 4.3.3.33.31 4.3.3.33.32 4.3.3.33.33 4.3.3.33.34 4.3.3.33.35 4.3.3.33.36 4.3.3.33.38 4.3.3.33.39 4.3.3.33.40 4.3.3.33.41 4.3.3.33.42 4.3.3.33.43 4.3.3.33.44 4.3.3.33.45 4.3.3.33.46 4.3.3.33.47 4.3.3.33.48 4.3.3.33.49 4.3.3.33.50 4.3.3.33.51 4.3.3.33.52 4.3.3.33.53 4.3.3.33.55 4.3.3.33.57 4.3.3.33.58 4.3.3.33.59 4.3.3.33.60 4.3.3.33.61 4.3.3.33.62 4.3.3.33.63 4.3.3.33.64 4.3.3.33.65 4.3.3.33.66 4.3.3.33.67 4.3.3.33.68 4.3.3.33.69 4.3.3.33.70 4.3.3.33.71 4.3.3.33.72 4.3.3.33.74 4.3.3.33.75 4.3.3.33.76 4.3.3.33.77 4.3.3.33.78 4.3.3.33.79 DATE TI/TLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT i/3I PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 076 PRODUCTION I ?%( L227 of246 9053VPPLN

4.3.3.33.80 4.3.3.33.81 4.3.3.33.82 4.3.3.33.83 4.3.3.33.84 4.3.3.33.85 4.3.3.33.86 4.3.3.33.87 4.3.3.33.88 4.3.3.33.89 4.3.3.33.90.1 4.3.3.33.90.2 4.3.3.33.90.3 4.3.3.33.90.4 4.3.3.33.90.5 4.3.3.33.90.6 4.3.3.33.90.7 4.3.3.33.90.8 4.3.3.33.90.9 4.3.3.33.90.10 4.3.3.33.90.11 4.3.3.33.90.12 4.3.3.33.90.13 4.3.3.33.90.14 4.3.3.33.90.15 4.3.3.33.90.16 4.3.3.33.92 4.3.3.33.93 4.3.3.33.94 4.3.3.33.95 4.3.3.33.96 4.3.3.33.97 4.3.3.33.98 4.3.3.33.99 4.3.3.33.100 4.3.3.33.101 4.3.3.33.102 4.3.3.33.103 4.3.3.33.104 4.3.3.33.105 4.3.3.33.106 4.3.3.33.107 4.3.3.33.110 4.3.3.33.111 4.3.3.33.112 4.3.3.33.113 DATE TITLE SOFTWARE VALIDATION TEST

-SYNCOR RADIATION MANAGEMENT 10/23/02 _ PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 3076 PRODUCTION £*%1t 228 of 246 94096603VTP PLN

A RR .R 114 A'ý 3 33 114 4.3.3.33.115 43333.115 A *U *VV h A A 33l... ---

4 . .*333117

. . I i 43333117 I 4.3.3.33.118 433.3.11 A R R3 11.q 4.3.3.33.120 4.3.3.33.121 4.3.3.33.122 4.3.3.33.123 4.3.3.33.124 4.3.3.33.125 4.3.3.33.128 4.3.3.33.129 4.3.3.33.130 4.3.3.33.131 4.3.3.33.132 4.3.3.33.133 4.3.3.33.134 4.3.3.33.135 4.3.3.33.136 4.3.3.33.137 4.3.3.33.138 4.3.3.33.139 4.3.3.33.140 4.3.3.33.141 4.3.3.33.142 4.3.3.33.143 4.3.3.33.145 4.3.3.33.146 4.3.3.33.147 4.3.3.33.148 4.3.3.33.149 4.3.3.33.150 4.3.3.33.151 4.3.3.33.152 4.3.3.33.153 4.3.3.33.154 4.3.3.33.155 4.3.3.33.156 4.3.3.33.157 4.3.3.33.158 4.3.3.33.159 4.3.3.33.160 4.3.3.33.162 DATE 1 TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT IoY3102 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. 94095603VTP al-41,fI( 22 f 246 PI N 1 06 PRODUCTION

4.3.3.33.163 4.3.3.33.164 4.3.3.33.165 4.3.3.33.166 4.3.3.33.167 4.3.3.33.168 4.3.3.33.169 4.3.3.33.170 4.3.3.33.171 4.3.3.33.172 4.3.3.33.173 4.3.3.33.174 4.3.3.33.175 4.3.3.33.176 4.3.3.33.177 4.3.3.33.178 4.3.3.33.181 4.3.3.33.182 4.3.3.33.183 4.3.3.33.184 4.3.3.33.185 4.3.3.33.186 4.3.3.33.187 4.3.3.33.188 4.3.3.33.189 4.3.3.33.190 4.3.3.33.191 4.3.3.33.192 4.3.3.33.193 4.3.3.33.194 4.3.3.33.195 4.3.3.33.196 4.3.3.33.197 4.3.3.34.2 4.3.3.34.3 4.3.3.34.5 4.3.3.34.7 4.3.3.34.7.2 4.3.3.34.7.3 4.3.3.34.7.4 4.3.3.34.7.5 4.3.3.34.7.6 4.3.3.34.7.7 4.3.3.34.7.8 4.3.3.34.7.9 DATE TITLE SOFTWARE VALIDATION TEST SYNCOR-RADIATION MANAGEMENT 10/23/02 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR IDOC I 20 6 94095603VCP SIZE 11 3076 1PRODUCTION 9?%-~f 230 of 246 1PLN

4.3.3.34.7.10 4.3.3.34.7.11 4.3.3.34.7.12 4.3.3.34.7.13 4.3.3.34.7.14 4.3.3.34.7.15 4.3.3.34.7.16 4.3.3.34.7.17 4.3.3.34.9 4.3.3.34.10 4.3.3.34.12 4.3.3.34.13.1 4.3.3.34.13.2 4.3.3.34.13.3 4.3.3.34.13.4 4.3.3.34.13.5 4.3.3.34.13.6 4.3.3.34.13.7 4.3.3.34.13.8 4.3.3.34.13.9 4.3.3.34.13.10 4.3.3.34.13.11 4.3.3.34.13.12 4.3.3.34.13.13 4.3.3.34.13.14 4.3.3.34.13.15 4.3.3.34.13.16 4.3.3.34.15 4.3.3.34.17 4.3.3.34.18 4.3.3.34.21 4.3.3.34.22 4.3.3.34.24 4.3.3.34.26 4.3.3.34.26.2 4.3.3.34.26.3 4.3.3.34.26.4 4.3.3.34.26.5 4.3.3.34.26.6 4.3.3.34.26.7 4.3.3.34.26.8 4.3.3.34.26.9 4.3.3.34.26.10 4.3.3.34.26.11 4.3.3.34.26.12 4.3.3.34.26.13 4.3.3.34.26.14 DATE 1 TITLE SOFTWARE VALIDATION TEST SYNCORRADIATION MANAGEMENT 1o23Io2 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO. SIZE 1 076 PRODUCTION 23 1 of 246 2JI~ 9053VPP]LN

1 1 A 2815 4.3.3.34.26.16 4.3.3.34.26.17 4.3.3.34.28 4.3.3.34.29 4.3.3.34.31.

4.3.3.34.32.1 4.3.3.34.32.2 4.3.3.34.32.3 4.3.3.34.32.4 4.3.3.34.32.5 4.3.3.34.32.6 4.3.3.34.32.7 4.3.3.34.32.8 4.3.3.34.32.9 4.3.3.34.32.10 4.3.3.34.32.11 4.3.3.34.32.12 4.3.3.34.32.13 4.3.3.34.32.14 4.3.3.34.32.15 4.3.3.34.32.16 4.3.3.34.34 4.3.3.34.36 4.3.3.34.37 4.3.3.34.39.1 4.3.3.34.39.2

-4.3.3.34.39.3 4.3.3.34.39.4 4.3.3.34.39.5 4.3.3.34.39.6 4.3.3.34.39.7 4.3.3.34.39.8 4.3.3.34.39.9 4.3.3.34.39.10 4.3.3.34.39.11 4.3.3.34.39.12 4.3.3.34.39.13 4.3.3.34.39.14 4.3.3.34.39.15 4.3.3.34.39.16 4.3.3.34.41 4.3.3.34.42 4.3.3.34.44 4.3.3.34.46 4.3.3.34.46.2 DATE 122 LE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT I302 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET NO.

1 3076 PRODUCTION I 'gl 232 of 246 94095603VTPPLN

4.3.3.34.46.3 4.3.3.34.46.4 4.3.3.34.46.5 4.3.3.34.46.6 4.3.3.34.46.7 4.3.3.34.46.8 4.3.3.34.46.9 4.3.3.34.46.10 4.3.3.34.46.11 4.3.3.34.46.12 4.3.3.34.46.13 4.3.3.34.46.14 4.3.3.34.46.15 4.3.3.34.46.16 4.3.3.34.46.17 4.3.3.34.48 4.3.3.34.49 4.3.3.34.51 4.3.3.34.53 4.3.3.34.54.1 4.3.3.34.54.3 4.3.3.34.54.4 4.3.3.34.54.5 4.3.3.34.54.6 4.3.3.34.54.7 4.3.3.34.54.8 4.3.3.34.54.9 4.3.3.34.54.10 4.3.3.34.54.11 4.3.3.34.54.12 4.3.3.34.54.13 4.3.3.34.54.14 4.3.3.34.54.15 4.3.3.34.54.16 4.3.3.34.54.17 4.3.3.34.54.18 4.3.3.34.56 4.3.3.34.57 4.3.3.34.59 4.3.3.34.61 4.3.3.34.61.2 4.3.3.34.61.3 4.3.3.34.61.4 4.3.3.34.61.5 4.3.3.34.61.6 DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT /312 -- PROCEDURE, 9405603 DOC CTRL SHEET SIZE REV EON NO. RELEASED FOR NO.

3076 PRODUCTION ObM*'( 233 of 246 94095603VTP PLN

4.3.3.34.61.7 4.3.3.34.61.8 4.3.3.34.61.9 4.3.3.34.61.10 4.3.3.34.61.11 4.3.3.34.61.12 4.3.3.34.61.13 4.3.3.34.61.14 4.3.3.34.61.15 4.3.3.34.61.16 4.3.3.34.61.17 4.3.3.34.63 4.3.3.34.66 4.3.3.34.68 4.3.3.34.70 4.3.3.34.71.1 4.3.3.34.71.2 4.3.3.34.71.3 4.3.3.34.71.4 4.3.3.34.71.5 4.3.3.34.71.6 4.3.3.34.71.7 4.3.3.34.71.8 4.3.3.34.71.9 4.3.3.34.71.10 4.3.3.34.71.11 4.3.3.34.71.12 4.3.3.34.71.13 4.3.3.34.71.14 4.3.3.34.71.15 4.3.3.34.71.16 4.3.3.34.73 4.3.3.34.76 4.3.3.34.77 4.3.3.34.79 4.3.3.34.81 4.3.3.34.81.2 4.3.3.34.81.3 4.3.3.34.81.4 4.3.3.34.81.5 4.3.3.34.81.6 4.3.3.34.81.7 4.3.3.34.81.8 4.3.3.34.81.9 4.3.3.34.81.10 DATE TI/LE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 1o 3102 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL SHEET 94095603VTP SIZE 1 3076 1PRODUCTION -%OEZ( 234 PLN 1f24

r ,. I 4_3_34.8111 4333481 A

4V R1 11 19 A AIl1 'A* I 43334_8113 43 38 131 AI'. AP I A 'I*

lI 'A'A A 33 441_15 48 154 .33 Aq*q*R11R A~J%.T% *' 1A.-Z P1________________________

43334 Rl17 A l1 A 4 4 3_34.85 . t AZ T .tS.

q 'ZA AR 4 4*4 7_1 4.3.3.34.87.2 4.3.3.34.87.3 4.3.3.34.87.4 4.3.3.34.87.5 4.3.3.34.87.6 4.3.3.34.87.7 4.3.3.34.87.8 4.3.3.34.87.9 4.3.3.34.87.10 4.3.3.34.87.11 4.3.3.34.87.12 4.3.3.34.87.13 4.3.3.34.87.14 4.3.3.34.87.15 4.3.3.34.87.16 4.3.3.34.89 4.3.3.34.92 4.3.3.34.93 4.3.3.34.95 4.3.3.34.97 4.3.3.34.97.2 4.3.3.34.97.3 4.3.3.34.97.4 4.3.3.34.97.5 4.3.3.34.97.6 4.3.3.34.97.7 4.3.3.34.97.8 4.3.3.34.97.9 4.3.3.34.97.10 4.3.3.34.97.11 4.3.3.34.97.12 4.3.3.34.97.13 4.3.3.34.97.14 4.3.3.34.97.15 4.3.3.34.97.16 4.3.3.34.97.17 SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT PROCEDURE,-9405603 SIZE REVI1 ECN 3076 NO. 94095603VTP PLN

4.3.3.34.99 4.3.3.34.102 4.3.3.34.103 4.3.3.34.105 4.3.3.34.108 4.3.3.34.108.2 4.3.3.34.108.3 4.3.3.34.108.4 4.3.3.34.108.5 4.3.3.34.108.6 4.3.3.34.108.7 4.3.3.34.108.8 4.3.3.34.108.9 4.3.3.34.108.10 4.3.3.34.108.11 4.3.3.34.108.12 4.3.3.34.108.13 4.3.3.34.108.14 4.3.3.34.108.15 4.3.3.34.108.16 4.3.3.34.108.17 4.3.3.34.109.1 4.3.3.34.109.2 4.3.3.34.109.3 4.3.3.34.109.4 4.3.3.34.109.5 4.3.3.34.109.6 4.3.3.34.109.7 4.3.3.34.109.8 4.3.3.34.109.9 4.3.3.34.109.10 4.3.3.34.109.11 4.3.3.34.109.12 4.3.3.34.109.13 4.3.3.34.109.14 4.3.3.34.109.15 4.3.3.34.109.16 4.3.3.34.112 4.3.3.34.113 4.3.3.34.115 4.3.3.34.117 4.3.3.34.117.2 4.3.3.34.117.3 4.3.3.34.117.4 4.3.3.34.117.5 DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT =31023/2 PROCEDURE, 9405603 REV ECN No. RELEASED FOR DOC CTRL] SHEET NO. 940903VTP 1 3076 PRODUCTION 9?%'YW 236 of 246 P]96O~F

4.3.3.34.117.6 4.3.3.34.117.7 4.3.3.34.117.8 4.3.3.34.117.9 4.3.3.34.117.10 4.3.3.34.117.11 4.3.3.34.117.12 4.3.3.34.117.13 4.3.3.34.117.14 4.3.3.34.117.15 4.3.3.34.117.16 4.3.3.34.117.17 4.3.3.34.117.18 4.3.3.34.119 4.3.3.34.120 4.3.3.34.122 4.3.3.35.3 4.3.3.35.4 4.3.3.35.9 4.3.3.35.10 4.3.3.36.6 4.3.3.36.7 4.3.3.36.8 4.3.3.36.9 4.3.3.36.10 4.3.3.36.11 4.3.3.36.12 4.3.3.36.13 4.3.3.36.14 4.3.3.36.15 4.3.3.36.16 4.3.3.36.17 4.3.3.36.18 4.3.3.36.19 4.3.3.37.5.1 4.3.3.37.5.2 4.3.3.37.5.3 4.3.3.37.5.4 4.3.3.37.5.5 4.3.3.37.5.6 4.3.3.37.5.7 4.3.3.37.5.8

-4.3.3.37.5.9 4.3.3.37.5.10 4.3.3.37.5.11 SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT PROCEDURE, 9405603 NO. SIZE RIVECNNO.

1 3076 94095603VTP PLN

4.3.3.37.5.12 4.3.3.37.5.13 4.3.3.37.5.14 4.3.3.37.5.15 4.3.3.37.5.16 4.3.3.37.7.1 4.3.3.37.7.2 4.3.3.37.7.3 4.3.3.37.7.4 4.3.3.37.7.5 4.3.3.37.7.6 4.3.3.37.7.7 4.3.3.37.7.8 4.3.3.37.7.9 4.3.3.37.7.10 4.3.3.37.7.11 4.3.3.37.7.12 4.3.3.37.7.13 4.3.3.37.7.14 4.3.3.37.7.15 4.3.3.37.7.16 4.3.3.37.9.1 4.3.3.37.9.2 4.3.3.37.9.3 4.3.3.37.9.4 4.3.3.37.9.5 4.3.3.37.9.6 4.3.3.37.9.7 4.3.3.37.9.8 4.3.3.37.9.9 4.3.3.37.9.10 4.3.3.37.9.11 4.3.3.37.9.12 4.3.3.37.9.13 4.3.3.37.9.14 4.3.3.37.9.15 4.3.3.37.9.16 4.3.3.38.7.1 4.3.3.38.7.2 4.3.3.38.7.3 4.3.3.38.7.4 4.3.3.38.7.5 4.3.3.38.7.6 4.3.3.38.7.7 4.3.3.38.7.8 DATE 1TrI'LE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT -- PROCEDURE, 9405603

-/2302 DO CTRL SHEET NO. 94095603VTP E REV ECN No. RELEASED FOR ii07 PRODUCTION = 3 of 246 PIN

4.3.3.38.7.9 4.3.3.38.7.10 4.3.3.38.7.11 4.3.3.38.7.12 4.3.3.38.7.13 4.3.3.38.7.14 4.3.3.38.7.15 4.3.3.38.7.16 4.3.3.38.11.1 4.3.3.38.11.2 4.3.3.38.11.3 4.3.3.38.11.4 4.3.3.38.11.5 4.3.3.38.11.6 4.3.3.38.11.7 4.3.3.38.11.8 4.3.3.38.11.9 4.3.3.38.11.10 4.3.3.38.11.11 4.3.3.38.11.12 4.3.3.38.11.13 4.3.3.38.11.14 4.3.3.38.11.15 4.3.3.38.11.16 4.3.3.38.13 4.3.3.38.14 4.3.3.38.15 4.3.3.38.16 4.3.3.38.17 4.3.3.38.18 4.3.3.38.19 4.3.3.38.20 4.3.3.38.21 4.3.3.38.22 4.3.3.38.23 4.3.3.38.24 4.3.3.38.25 4.3.3.38.26 4.3.3.38.27 4.3.3.38.28 4.3.3.38.31.1 4.3.3.38.31.2 4.3.3.38.31.3 4.3.3.38.31.4 4.3.3.38.31.5 DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIAION MANAGEMENT 1013/02 PROCEDURE, 9405603 ECN NO. RELEASED FOR 000 CTRL SHEET NO. SIZE REV 1 3076 1PRODUCTION 0ý%Y(t 239 of 246 9053VPP"L]N

4.3.3.38.31.6 4.3.3.38.31.7 4.3.3.38.31.8 4.3.3.38.31.9 4.3.3.38.31.10 4.3.3.38.31.11 4.3.3.38.31.12 4.3.3.38.31.13 4.3.3.38.31.14 4.3.3.38.31.15 4.3.3.38.31.16 4.3.3.39.7.1 4.3.3.39.7.2 4.3.3.39.7.3 4.3.3.39.7.4 4.3.3.39.7.5 4.3.3.39.7.6 4.3.3.39.7.7 4.3.3.39.7.8 4.3.3.39.7.9 4.3.3.39.7.10 4.3.3.39.7.11 4.3.3.39.7.12 4.3.3.39.7.13 4.3.3.39.7.14 4.3.3.39.7.15 4.3.3.39.7.16 4.3.3.39.9.1 4.3.3.39.9.2 4.3.3.39.9.3 4.3.3.39.9.4 4.3.3.39.9.5 4.3.3.39.9.6 4.3.3.39.9.7 4.3.3.39.9.8 4.3.3.39.9.9 4.3.3.39.9.10 4.3.3.39.9.11 4.3.3.39.9.12 4.3.3.39.9.13 4.3.3.39.9.14 4.3.3.39.9.15 4.3.3.39.9.16 4.3.3.39.12.1 4.3.3.39.12.2 DATE 1 TrrLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT ¶32 - -PROCEDURE, 9405603 REV ECN No. RELEASED FOR DOC CTRL SHEET NO. 94095603VTP 240 of 246 PIN 1 307 PRODUCTION ~1=~

4.3.3.39.12.3 4.3.3.39.12.4 4.3.3.39.12.5 4.3.3.39.12.6 4.3.3.39.12.7 4.3.3.39.12.8 4.3.3.39.12.9 4.3.3.39.12.10 4.3.3.39.12.11 4.3.3.39.12.12 4.3.3.39.12.13 4.3.3.39.12.14 4.3.3.39.12.15 4.3.3.39.12.16 4.3.3.40.8.1 4.3.3.40.8.2 4.3.3.40.8.3 4.3.3.40.8.4 4.3.3.40.8.5 4.3.3.40.8.6 4.3.3.40.8.7 4.3.3.40.8.8 4.3.3.40.8.9 4.3.3.40.8.10 4.3.3.40.8.11 4.3.3.40.8.12 4.3.3.40.8.13 4.3.3.40.8.14 4.3.3.40.8.15 4.3.3.40.8.16 4.3.3.40.10.1 4.3.3.40.10.2 4.3.3.40.10.3 4.3.3.40.10.4 4.3.3.40.10.5 4.3.3.40.10.6 4.3.3.40.10.7 4.3.3.40.10.8 4.3.3.40.10.9 4.3.3.40.10.10 4.3.3.40.10.11 4.3.3.40.10.12 4.3.3.40.10.13 4.3.3.40.10.14 4.3.3.40.10.15 DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT I1= PROCEDURE, 9405603 RELEASED FOR DOC CTRL SHEET NO. 3sP SECN NO.

3076 PRODUCTION ,r%( 241 of 246 9 0PLN

4.3.3.40.10.16 4.3.3.40.12.1 4.3.3.40.12.2 4.3.3.40.12.3 4.3.3.40.12.4 4.3.3.40.12.5 4.3.3.40.12.6 4.3.3.40.12.7 4.3.3.40.12.8 4.3.3.40.12.9 4.3.3.40.12.10 4.3.3.40.12.11 4.3.3.40.12.12 4.3.3.40.12.13 4.3.3.40.12.14 4.3.3.40.12.15 4.3.3.40.12.16 4.3.3.40.14 4.3.3.40.15 4.3.3.40.16 4.3.3.40.17 4.3.3.40.18 4.3.3.40.19 4.3.3.40.20 4.3.3.40.21 4.3.3.40.22 4.3.3.40.23 4.3.3.40.24 4.3.3.40.25 4.3.3.40.26 4.3.3.40.27 4.3.3.40.28 4.3.3.40.29 4.3.3.41.3.1 4.3.3.41.3.2 4.3.3.41.3.3 4.3.3.41.3.4 4.3.3.41.3.5 4.3.3.41.3.6 4.3.3.41.3.7 4.3.3.41.3.8 4.3.3.41.3.9 4.3.3.41.3.10 4.3.3.41.3.11 4.3.3.41.3.12 4.3.3.41.3.13 I

DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT I - PROCEDURE, 9405603 DOC CTRL SHEET NO. ' SIZE REV ECN NO. RELEASED FOR 1OZ(( 242 of 246 PLI 3076 PRODUCTION

4.3.3.41.3.14 4.3.3.41.3.15 4.3.3.41.3.16 4.3.3.42.4.1 4.3.3.42.4.2 4.3.3.42.4.3 4.3.3.42.4.4 4.3.3.42.4.5 4.3.3.42.4.6 4.3.3.42.4.7 4.3.3.42.4.8 4.3.3.42.4.9 4.3.3.42.4.10 4.3.3.42.4.11 4.3.3.42.4.12 4.3.3.42.4.13 4.3.3.42.4.14 4.3.3.42.4.15 4.3.3.42.4.16 4.3.3.43.3 4.3.3.43.5 4.3.3.43.6 4.3.3.43.7.1 4.3.3.43.7.2 4.3.3.43.7.3 4.3.3.43.7.4 4.3.3.43.7.5 4.3.3.43.7.6 4.3.3.43.7.7 4.3.3.43.7.8 4.3.3.43.7.9 4.3.3.43.7.10 4.3.3.43.7.11 4.3.3.43.7.12 4.3.3.43.7.13 4.3.3.43.7.14 4.3.3.43.9 4.3.3.43.10.1 4.3.3.43.10.2 4.3.3.43.10.3 4.3.3.43.10.4 44.3.3.43.10.5 4.3.3.43.10.6 4.3.3.43.10.7 4.3.3.43.10.8 DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT l=3/02 PROCEDURE, 9405603 SHEET NO. SIZE SECN NO. RELEASED FOR DOC CTRL K3t076 PRODUCTION ,?:4 23of46PLIN 94095603VTP 0POION f 243 of 246

.7 1 A Q 0AQ Ifl I IAli 4-4_3_343.1 0.10 4 i. i A _': _":A.* In I -& 4. .

4 310.12 4334101 4.3.3.43.10.13 43 43101 3 A *O d1* 1014W A q -4A3101 4 * .4310.15

.i 4 4. 1-

. _qA_o ~n IR

~,A.q 'a'10"

!:R4R 1fl17 A 3 3t3101 4.3.3.43.12.1 4.3.3.43.12.2 4.3.3.43.12.3 4.3.3.43.12.4 4.3.3.43.12.5 4.3.3.43.12.6 4.3.3.43.12.7 4.3.3.43.12.8 4.3.3.43.12.9 4.3.3.43.12.10 4.3.3.43.12.11 4.3.3.43.12.12 4.3.3.43.12.13 4.3.3.43.12.14 4.3.3.43.12.15 4.3.3.43.12.16 Test Equipment Log:

Description:

Model No. Serial No.: CAL Due Date:

__ I _ _ _ _ Ii i i 1-

_ _ _ _ _ _ I i I I t I 4 I 4 1 i 4. +

i i~ 1 I 4- +

ff i

_ _I_ _ _ 1 4.

I i-I t 1 4 1

____________ I ________________ A.

DATE 10I E SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT lO2o2 PROCEDURE, 9405603 REV ECN NO. RELEASED FOR DOC CTRL I4SHEET NO. SIZE 1 3076 PRODUCTION ~.~( 244 of 246 9053VPPI]N

6.6 Environmental Information:

6.7 Anomalies Events:

6.8 Incident Report Identifiers:___________________________

DATE TITLE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 10o2 PROCEDURE, 9405603 RELEASED FOR DOC CTRL SHEET No. SIZE REV ECN NO.

03076 PRODUCTION L %'f 245 of 246 PLN

7 Test Incident Report 7.1 Test Incident Report Identifier_ _

7.2 Summary

7.3 Incident

Description:

7.3.1 Inputs

7.3.2 Expected results:

7.3.3 Anomalies

7.3.4 Date and time:

7.3.5 Proce'dure step*~.

7.3.6 Environments

7.3.7 Attempts to repeat:

7.3.8 Testers

7.3.9 Observers:

7.4 Impact

7.5 Resolution:

DATE TITI/LE SOFTWARE VALIDATION TEST SYNCOR RADIATION MANAGEMENT 1o13o2 PROCEDURE, 9405603 RELEASED FOR DOC CTRL SHEET NO. SIZE REV ECN NO.

3076 PRODUCTION .yEZ(( 246 of 246 PLN 1

ML023220323

Text

5.3 Location

5.4 Status

Description:

Description:

Description:

7.2 Summary

Description:

7.3.1 Inputs

7.3.3 Anomalies

7.3.6 Environments

7.3.8 Testers

7.4 Impact

Navigation menu

Search