ML021370029

Submittal of Core Operating Limits Report for Donald C. Cook Unit 2

ML021370029
Person / Time
Site:	Cook
Issue date:	05/15/2002
From:	Greenlee S Indiana Michigan Power Co
To:	Document Control Desk, Office of Nuclear Reactor Regulation
References
AEP:NRC:2691-13
Download: ML021370029 (15)

Text

Indiana Michigan Power Company "500Circle Drive Buchanan, MI 49107 1395 INDIANA MICHIGAN POWER May 15, 2002 AEP:NRC:2691-13 10 CFR 50.4 Docket No.: 50-315 U.S. Nuclear Regulatory Commission ATTN: Document Control Desk Mail Stop O-P 1-17 Washington, DC 20555-0001 Donald C. Cook Nuclear Plant Unit 2 CORE OPERATING LIMITS REPORT Indiana Michigan Power Company (I&M), the licensee for Donald C. Cook Nuclear Plant Unit 1, is submitting the Core Operating Limits Report (COLR) for Unit 1 Cycle 18 in accordance with Technical Specification 6.9.1.9.4. I&M is also submitting a corrected Table 1 of the Unit 1 Cycle 17 COLR.

The Unit Cycle 18 COLR is provided as Attachment 1 to this letter.

The November 29, 2000, submittal forwarding the Unit 1 Cycle 17 COLR contained two errors in Table 1. Specifically, the entries for point 41 were missing and the data shown for 19442 MWD/MTU bumup for point 40 was actually the data for that same burnup for the missing point 41. I&M verified that the correct data had been used throughout Unit 1 Cycle 17 operation. pro-vides the corrected Table 1 to the Unit 1 Cycle 17 COLR.

This letter contains no new commitments. Should you have any questions, please contact Mr. Gordon P. Arent, Manager of Regulatory Affairs, at (616) 697-5553.

Sincerely, Scot A. Greenlee Director of Nuclear Technical Services Attachments KS/jen A o

U. S. Nuclear Regulatory Commission AEP:NRC:2691-13 Page 2 c: K. D. Curry J. E. Dyer MDEQ - DW & RPD NRC Resident Inspector R. Whale

ATTACHMENT 1 TO AEP:NRC:2691-13 Unit 1 Cycle 18 Core Operating Limits Report

Donald C. Cook Nuclear Plant Unit I Cycle 18 Core Operating Limits Report Revision 0

D. C. COOK UNIT I CYCLE 18 APRIL 2002 D. C. COOK UNIT 1 CYCLE 18 APRIL 2002 1.0 CORE OPERATING LIMITS REPORT This Core Operating Limits Report (COLR) for Donald C. Cook Nuclear Plant Unit 1 Cycle 18 design has been prepared in accordance with the requirements of Technical Specification 6.9.1.9.

The Technical Specifications affected by this report are listed below:

3/4.1.1.4 Moderator Temperature Coefficient 3/4.1.3.1 Movable Control Assemblies Group Height 3/4.1.3.3 Rod Drop Time 3/4.1.3.4 Shutdown Rod Insertion Limit 3/4.1.3.5 Control Rod Insertion Limits 3/4.2.1 Axial Flux Difference (AFD) 3/4.2.2 Heat Flux Hot Channel Factor (FQ(Z))

3/4.2.3 Nuclear Enthalpy Hot Channel Factor (FNAH) 3/4.2.6 Allowable Power Level (APL)

Page 1 of 9

D. C. COOK UNIT I CYCLE 18 APRIL 2002 D.C. COOKUNIT 1 CYCLE 18 APRIL 2002 2.0 OPERATING LIMITS The cycle-specific parameter limits for the specifications listed in Section 1.0 are presented in the following subsections. These limits have been developed using the NRC-approved methodologies specified in Technical Specifications 6.9.1.9.2.

2.1 Moderator Temperature Coefficient (Specification 3/4.1.1.4) 2.1.1 The Moderator Temperature Coefficient (MTC) limits are:

The BOL/ARO-MTC shall be less positive than the value given in Figure 1.

The EOL/ARO/RTP-MTC shall be less negative than -4.54 x 104 Ak/k/ 0 F.

This limit is based on a Tavg program with HFP Tavg of 554.0 - 558.0 'F.

Where: ARO stands for All Rods Out BOL stands for Beginning of Cycle Life EOL stands for End of Cycle Life RTP stands for Rated Thermal Power HFP stands for Hot Full Thermal Power 2.1.2 The MTC Surveillance limit is:

The 300 ppm/ARO/RTP-MTC should be less negative than or equal to

-3.84 xl 0-4Ak/k/OF at a vessel average temperature of 554.0 - 558.0 'F.

2.2 Rod Drop Time Drop Height (Specification 3/4.1.3.3) 2.2.1 All rods shall be dropped from 228 steps.

2.3 Shutdown Rod Insertion Limit (Specification 3/4.1.3.4) 2.3.1 The shutdown rods shall be withdrawn to 228 steps.

Page 2 of 9

D. C. COOK UNIT I CYCLE 18 APRIL 2002 2.4 Control Rod Insertion Limits (Specifications 3/4.1.3.5 and 3/4.1.3.1) 2.4.1 The control rod banks shall be limited in physical insertion as shown in Figure 2.

2.4.2 Successive Control Banks shall overlap by 100 steps. The sequence for Control Bank withdrawal shall be Control Bank A, Control Bank B, Control Bank C and Control Bank D.

2.5 Axial Flux Difference (AFD) (Specification 3/4.2.1) 2.5.1 The Allowable Operation Limits are provided in Figure 3.

2.5.2 The AFD target band during base load operations is +3%, -3% (not applicable for this cycle).

2.5.3 The AFD target band is +5%, -5% for a cycle average accumulated bumup

Ž0.0 MWD/MTU.

2.6 Heat Flux Hot Channel Factor - FQ(Z) (Specification 3.2.2)

FQ(Z) _*CFQ

• K(Z) for P > 0.5 FQ(Z) _<2

• CFQ

• K(Z) for P < 0.5 THERMAL POWER where: P = RATED THERMAL POWER 2.6.1 CFQ = 2.15 for Westinghouse Fuel.

2.6.2 K(Z) is provided in Figure 4 for Westinghouse Fuel.

Page 3 of 9

D. C. COOK UNIT I CYCLE 18 APRIL 2002 2.7 Nuclear Enthalpy Hot Channel Factor - FNAH (Specification 3/4.2.3)

FNAH < CFAH * (1 + PFAH *(l-P))

THERMAL POWER where: P = RATED THERMAL POWER 2.7.1 CFAH = 1.49 for Westinghouse Fuel.

2.7.2 PFAH = 0.3 2.8 Allowable Power Level - APL (Specification 3.2.6)

APL = min over Z of CFQ

• K(Z)

• 100%

FQ(Z)

• V(Z)

• F1 2.8.1 V(Z) is provided in Table 1 for +/-5% AFD target band 2.8.2 CFQ and K(Z) are provided in COLR Sections 2.6.1 and 2.6.2, respectively 2.8.3 For Cycle 18, F, = 1.02 for all bumups.

Page 4 of 9

D. C. COOK UNIT I CYCLE 18 APRIL 2002 D.C. COOKUMT 1 CYCLE 18 APRIL 2002 FIGURE 1 MODERATOR TEMPERATURE COEFFICIENT (MTC) 1.0 - , - p- y - y - - Y- F- Y-

[UNACCEPTABLE OPERATION 0.5 IL 0 0.0 ACCEPTABLE OPERATION]

!-I 0:

-0.5 4 t F 1- 1 1 t 4 I F + t I 4

-1.0 - i - .- . - . - - - . - I - I - *-

0 10 20 30 40 50 60 70 80 90 100 Percent Rated Thermal Power Page 5 of 9

D. C. COOK UNIT I CYCLE 18 APRIL 2002 D.C. COOKUNIT I CYCLE 18 APRIL 2002 FIGURE 2 ROD BANK INSERTION LIMITS VERSUS THERMAL POWER (FOUR LOOP OPERATION) 250 225 200 175 150 z 125 0

13.

0~

a 100 0

CD 0 75 0

50 25 0

0 10 20 30 40 50 60 70 80 90 100 POWER (% of Rated Thermal Power)

Page 6 of 9

D. C. COOK UNIT I CYCLE 18 APRIL 2002 D.C. COOK UNIT 1 CYCLE 18 APRIL 2002 FIGURE 3 AXIAL FLUX DIFFERENCE AS A FUNCTION OF RATED THERMAL POWER 100 90 80 I- 70 rC

..J 60 E

1a..

i 50 E

E 40 4m 0 30 20 10 0

-50 -40 -30 -20 -10 0 10 20 30 40 50 FLUX DIFFERENCE (DELTA-I)

Page 7 of 9

D. C. COOK UNIT I CYCLE 18 APRIL 2002 D.C. COOK UNIT 1 CYCLE 18 APRIL 2002 FIGURE 4 K(Z) - NORMALIZED FQ(Z) AS A FUNCTION OF CORE HEIGHT (FOR WESTINGHOUSE FUEL) 1.2 (0.0,1.0) (6.0,1.0) 1.0 (12.0, 0.925) 0.8 (D

z Lu N

-J Li 0.6 0

z 0.4 4. F 4. 4 4 0.2 .4. 1 4 4 4 0 I i &

0 2 4 6 8 10 12 CORE HEIGHT (FT)

Page 8 of 9

D. C. COOK UNIT 1 CYCLE 18 APRIL 2002 TABLE I DONALD C. COOK UNIT 1 CYCLE 18 V(Z) FUNCTION Height Burnup (MWD/MTU)

PT (Ft) 15.0 1000 2000 4000 6000 8000 10000 12000 14000 16000 17334 1 0.0 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 2 0.2 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 3 0.4 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 4 0.6 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 5 0.8 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 6 1.0 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 7 1.2 1.0971 1.0979 1.0990 1.1015 1.1047 1.1083 1.1126 1.1174 1.1229 1.1283 1.1318 8 1.4 1.0973 1.0981 1.0991 1.1015 1.1045 1.1079 1.1118 1.1163 1.1214 1.1264 1.1297 9 1.6 1.0974 1.0981 1.0990 1.1013 1.1040 1.1071 1.1107 1.1148 1.1194 1.1240 1.1270 10 1.8 1.0972 1.0978 1.0987 1.1007 1.1032 1.1060 1.1092 1.1128 1.1169 1.1209 1.1235 11 2.0 1.0968 1.0974 1.0981 1.0999 1.1020 1.1044 1.1072 1.1103 1.1137 1.1172 1.1194 12 2.2 1.0962 1.0967 1.0973 1.0988 1.1006 1.1026 1.1048 1.1073 1.1101 1.1129 1.1147 13 2.4 1.0954 1.0958 1.0964 1.0976 1.0990 1.1005 1.1022 1.1041 1.1061 1.1081 1.1094 14 2.6 1.0943 1.0947 1.0953 1.0963 1.0973 1.0984 1.0995 1.1006 1.1017 1.1028 1.1035 15 2.8 1.0931 1.0935 1.0939 1.0947 1.0953 1.0959 1.0964 1.0968 1.0970 1.0973 1.0975 16 3.0 1.0916 1.0918 1.0921 1.0926 1.0929 1.0930 1.0930 1.0928 1.0924 1.0920 1.0918 17 3.2 1.0900 1.0901 1.0901 1.0901 1.0899 1.0897 1.0892 1.0886 1.0879 1.0871 1.0867 18 3.4 1.0889 1.0885 1.0881 1.0873 1.0866 1.0861 1.0857 1.0855 1.0853 1.0852 1.0851 19 3.6 1.0886 1.0875 1.0864 1.0847 1.0838 1.0835 1.0839 1.0850 1.0870 1.0889 1.0900 20 3.8 1.0883 1.0869 1.0855 1.0836 1.0827 1.0828 1.0840 1.0864 1.0899 1.0935 1.0956 21 4.0 1.0879 1.0864 1.0850 1.0831 1.0824 1.0831 1.0850 1.0884 1.0931 1.0979 1.1008 22 4.2 1.0873 1.0858 1.0844 1.0828 1.0825 1.0837 1.0863 1.0905 1.0962 1.1020 1.1055 23 4.4 1.0865 1.0852 1.0840 1.0828 1.0831 1.0847 1.0879 1.0927 1.0991 1.1056 1.1095 24 4.6 1.0857 1.0845 1.0835 1.0827 1.0834 1.0856 1.0893 1.0947 1.1016 1.1087 1.1130 25 4.8 1.0845 1.0835 1.0827 1.0824 1.0836 1.0862 1.0904 1.0963 1.1038 1.1113 1.1160 26 5.0 1.0836 1.0828 1.0822 1.0821 1.0836 1.0866 1.0912 1.0975 1.1054 1.1134 1.1183 27 5.2 1.0831 1.0823 1.0818 1.0819 1.0836 1.0868 1.0917 1.0982 1.1065 1.1148 1.1199 28 5.4 1.0825 1.0817 1.0812 1.0815 1.0833 1.0867 1.0917 1.0985 1.1070 1.1155 1.1208 29 5.6 1.0816 1.0809 1.0804 1.080F 1.0828 1.0862 1.0913 1.0982 1.1068 1.1154 1.1208 30 5.8 1.0804 1.0797 1.0793 1.0797 1.0817 1.0853 1.0905 1.0975 1.1062 1.1149 1.1204 31 6.0 1.0790 1.0782 1.0778 1.0782 1.0802 1.0838 1.0890 1.0961 1.1049 1.1138 1.1193 32 6.2 1.0772 1.0764 1.0760 1.0764 1.0784 1.0820 1.0872 1.0943 1.1030 1.1118 1.1173 33 6.4 1.0750 1.0745 1.0743 1.0750 1.0772 1.0807 1.0857 1.0924 1.1006 1.1088 1.1139 34 6.6 1.0724 1.0724 1.0728 1.0743 1.0768 1.0803 1.0849 1.0907 1.0976 1.1046 1.1090 35 6.8 1.0694 1.0701 1.0711 1.0735 1.0764 1.0799 1.0840 1.0887 1.0940 1.0993 1.1027 36 7.0 1.0668 1.0684 1.0701 1.0736 1.0770 1.0804 1.0837 1.0869 1.0901 1.0932 1.0953 37 7.2 1.0642 1.0668 1.0696 1.0746 1.0786 1.0816 1.0837 1.0847 1.0847 1.0847 1.0849 38 7.4 1.0627 1.0660 1.0694 1.0751 1.0792 1.0818 1.0829 1.0823 1.0801 1.0777 1.0766 39 7.6 1.0661 1.0684 1.0707 1.0748 1.0780 1.0802 1.0816 1.0819 1.0813 1.0807 1.0805 40 7.8 1.0695 1.0705 1.0715 1.0736 1.0756 1.0774 1.0792 1.0808 1.0823 1.0838 1.0848 41 8.0 1.0723 1.0725 1.0729 1.0738 1.0751 1.0766 1.0785 1.0806 1.0831 1.0856 1.0872 42 8.2 1.0748 1.0750 1.0753 1.0761 1.0772 1.0786 1.0802 1.0822 1.0844 1.0867 1.0881 43 8.4 1.0770 1.0773 1.0778 1.0788 1.0799 1.0811 1.0825 1.0840 1.0856 1.0873 1.0884 44 8.6 1.0788 1.0791 1.0796 1.0806 1.0817 1.0829 1.0843 1.0858 1.0875 1.0892 1.0903 45 8.8 1.0800 1.0807 1.0815 1.0831 1.0848 1.0865 1.0884 1.0902 1.0922 1.0941 1.0954 46 9.0 1.0813 1.0825 1.0838 1.0864 1.0888 1.0912 1.0934 1.0955 1.0975 1.0995 1.1008 47 9.2 1.0821 1.0838 1.0858 1.0894 1.0927 1.0956 1.0982 1.1004 1.1022 1.1040 1.1052 48 9.4 1.0829 1.0852 1.0878 1.0924 1.0964 1.0999 1.1027 1.1049 1.1065 1.1081 1.1092 49 9.6 1.0866 1.0891 1.0918 1.0967 1.1009 1.1045 1.1073 1.1093 1.1106 1.1119 1.1129 50 9.8 1.0904 1.0929 1.0957 1.1007 1.1051 1.1087 1.1117 1.1139 1.1153 1.1167 1.1178 51 10.0 1.0937 1.0963 1.0991 1.1043 1.1088 1.1126 1.1157 1.1181 1.1198 1.1215 1.1227 52 10.2 1.0968 1.0995 1.1024 1.1076 1.1122 1.1162 1.1194 1.1219 1.1237 1.1255 1.1268 53 10.4 1.0997 1.1023 1.1053 1.1106 1.1153 1.1193 1.1227 1.1253 1.1271 1.1289 1.1303 54 10.6 1.1020 1.1047 1.1077 1.1131 1.1179 1.1219 1.1253 1.1279 1.1298 1.1317 1.1331 55 10.8 1.1040 1.1068 1.1098 1.1153 1.1201 1.1242 1.1276 1.1302 1.1321 1.1339 1.1353 56 11.0 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 57 11.2 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 58 11.4 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 59 11.6 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 60 11.8 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 61 12.0 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 Top and bottom 10%of core excluded as per Technical Specifications.

Page 9 of 9

ATTACHMENT 2 TO AEP:NRC:2691-13 Corrected Table 1 to Unit 1 Cycle 17 Core Operating Limits Report

D. C. COOK UNIT 1 CYCLE 17 FEBRUARY 2002 TABLE 1 DONALD C. COOK UNIT 1 CYCLE 17 V(Z) FUNCTION Height Burnup (MWD/MTU)

PT (FT.) 150. 1000. 2000. 4000. 6000. 8000. 10000. 12000. 14000. 16000. 180000. 19442.

1 0.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.O000 1.0000 2 0.2000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 3 0.4000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 4 0.6000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 5 0.8000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.00M0 1.0000 1.0000 1.0000 1.0000 6 1.0000 1.0000 1.0000 1.0000 i.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 7 1.2000 1.1043 1.1041 1.1040 1.1044 1.1057 1.1077 1.1105 1.1142 1.1187 1.1240 1.1290 1.1323 8 1.4000 1.1033 1.1032 1.1033 1.1039 1.1052 1.1071 1.1098 3..132 1.1174 11222 1.12.9 9 1.6000 1.1021 1.1021 1.1023 1.1031 1.1044 1.1063 1.1088 3.1120 1.1157 1.1200 1.1240 1.1268 10 1.8000 1.1006 1.1008 1.1011 1.1020 1.1033 1.1052 1.1074 1.1102 1.1135 1.1172 1.1207 1.1231 11 2.0000 1.0989 1.0991 1.0995 1.1006 1.1020 1.1037 1.1057 1.1081 1.1108 1.1139 1.1167 1.1187 12 2.2000 1.0969 1.0973 1.0978 1.0989 1.1003 1.1018 1.1036 1.1055 1.1077 1.1100 1.1123 0.1139 13 2.4000 1.0946 1.0951 1.0957 1.0970 1.0983 1.0997 1.1011 1.1026 1.1042 1.1058 1.1073 1.1085 14 2.6000 1.0922 1.0928 1.0935 1.0948 1.0960 1.0972 1.0983 1.0994 1.1003 1.1012 1.1021 1.1028 15 2.8000 1.0897 1.0904 1.091! 1.0924 1.0936 1.0945 1.0953 1.0958 1.0962 1.0963 1.0965 1.0968 16 3.0000 1.0872 1.0879 1.0887 1.0900 1.0910 1.0917 1.0921 1.0921 1.0918 1.0912 1.0908 1.0905 17 3.2000 1.0848 1.0855 1.0863 1.0875 1.0884 1.0889 1.0890 1.0887 1.0879 1.0868 1.0859 1.0854 18 3.4000 1.0832 1.0837 1.0842 1.0851 1.0857 1.0861 1.0863 1.0862 1.0858 1.0852 1.0847 1.0844 19 3.6000 1.0831 1.0831 1.0830 1.0831 1.0834 1.0839 1.0845 1.0854 1.0864 1.0877 1.0889 1.0896 20 3.8000 1.0841 1.0835 1.0829 1.0822 1.0821 1.0826 1.0837 1.0855 1.0880 1.0911 1.0939 1.0957 21 4.0000 1.0856 1.0846 1.0836 1.0824 1.0820 1.0826 1.0841 1.0866 1.0900 1.0944 1.0983 1.1009 22 4.2000 1.0871 1.0858 1.0845 1.0828 1.0823 1.0829 1.0848 1.0878 1.0921 1.0976 1.1025 1.1057 23 4.4000 1.0884 1.0868 1.0853 1.0832 1.0826 1.0832 1.0853 1.0809 1.0940 1.1005 1.1062 1.1100 24 4.6000 1.0896 1.0879 1.0862 1.0841 1.0835 1.0843 1.0866 1.0906 1.0961 1.1031 1.1093 1.1134 25 4.8000 1.0905 1.0888 1.0871 1.0849 1.0843 1.0852 1.0877 1.0919 1.0978 1.1053 1.1119 3.1163 26 5.0000 1.0912 1.0894 1.0877 1.0855 1.0849 1.0859 1.0885 1.0930 1.0991 1.1070 1.1140 3.1186 27 5.2000 1.0917 1.0898 1.0880 1.0858 1.0853 1.0863 1.0891 1.0937 1.1001 1.1081 1.1153 1.1201 28 5.4000 1.0918 1.0899 1.0881 1.0859 1.0854 1.0865 1.0093 1.0940 1.1005 1.1087 1.1160 1.1208 29 5.6000 1.0915 1.0896 1.0879 1.0857 1.0852 1.0863 1.0892 1.0939 1.1004 1.1086 1.1160 1.1208 30 5.8000 1.0908 1.0890 1.0873 1.0851 1.0846 1.0857 1.0886 1.0933 1.0997 1.1078 1.1151 1.1199 31 6.0000 1.0897 1.0879 1.0863 1.0842 1.0837 1.0848 1.0876 1.0921 1.0984 1.1064 1.1135 1.1181 32 6.2000 1.0881 1.0864 1.0848 1.0827 1.0823 1.0833 1.0860 1.0903 1.0964 1.1040 1.1108 1.1153 33 6.4000 1.0861 1.0844 1.0828 1.0809 1.0804 1.0814 1.0839 1.0851 1.0939 1.1012 1.1078 1.1121 34 6.6000 1.0839 1.0822 1.0806 1.0785 1.0780 1.0790 1.0815 1.0857 1.0916 1.0989 1.1055 1.1098 35 6.8000 1.0818 1.0799 1.0780 1.0756 1.0747 1.0755 1.0780 1.0822 1.0882 1.0959 1.1027 1.1072 36 7.0000 1.0785 1.0772 1.0761 1.0746 1.0744 1.0754 1.0777 1.0812 1.0861 1.0923 1.0978 3.1014 37 7.2000 1.0770 1.0766 1.0764 1.0763 1.0769 1.0780 1.0798 1.0822 1.0852 1.0889 1.0923 1.0945 38 7.4000 1.0792 1.0790 1.0786 1.0786 1.0789 1.0796 1.0806 1.0821 1.0840 1.0863 1.0884 1.0898 39 7.6000 1.0805 1.0804 1.0803 1.0802 1.0803 1.0806 1.0812 1.0819 1.0829 1.0840 1.0851 1.0858 40 7.8000 1.0814 1.0814 1.0814 1.0814 1.0813 1.0813 1.0812 1.0811 1.0810 1.0809 1.0808 1.0807 41 8.0000 1.0818 1.0817 1.0815 1.0812 1.0809 1.0807 1.0805 1.0804 1.0803 1.0803 1.0803 1.08033 42 8.2000 1.0819 1.0815 1.0811 1.0804 1.0800 1.0799 1.0799 1.0803 1.0808 1.0816 1.0823 1.0827 43 8.4000 1.0812 1.0809 1.0805 1.0801 1.0798 1.0799 1.0801 1.0807 1.0815 1.0826 1.0835 1.0841 44 8.6000 1.0801 1.0801 1.0802 1.0805 1.0809 1.0816 1.0825 1.0835 1.0848 1.0862 1.0876 1.0885 45 8.8000 1.0815 1.0814 1.0813 1.0815 1.0821 1.0831 1.0844 1.0863 1.0885 1.0911 1.0936 1.0952 46 9.0000 1.0842 1.0840 1.0838 1.0839 1.0846 1.0857 1.0875 1.0898 1.0927 1.0961 1.0992 1.1013 47 9.2000 1.0864 1.0864 1.0866 1.0874 1.0885 1.0901 1.0921 1.0946 1.0975 1.1008 1.1040 3.1061 48 9.4000 1.0891 1.0896 1.0901 1.0915 1,0931 1.0950 1.0971 1.0996 1.1023 1.1053 3.1081 1.1101 49 9.6000 1.0938 1.0943 1.0950 1.0964 1.0980 1.0999 1.1019 1.1042 1.1066 1.1093 1.1118 1.1136 50 9.8000 1.0984 1.0990 1.0996 1.1011 1.1027 1.1045 1.1065 1.1086 1.1109 1.1134 1.1158 1.1175 51 10.0000 1.1027 1.1032 1.1039 1.1054 1.1070 1.1088 1.1107 1.1128 1.1151 1.1176 1.1199 1.1216 52 10.2000 1.1068 1.1073 1.1080 1.1095 1.1111 1.1128 1.1147 1.1168 1.1189 1.1212 1.1235 1.1250 53 10.4000 1.1105 1.1111 3.1118 1.1133 1.1149 1.1166 1.1183 1.1202 1.1222 1.1244 1.1264 1.1279 54 10.6000 1.1139 1.1144 1.1151 1.1165 1.1180 1.1197 1.1214 1.1233 1.1253 1.1275 1.1295 1.1310 55 10.8000 1.1168 1.1173 1.1180 1.1193 1.1208 1.1224 1.1242 1.1260 1.1280 1.1302 1.1323 1.1337 56 31.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 57 11.2000 1.0000 1.0000 3.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.000 58 11.4000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.000W 1.0000 59 11.6000 1.0000 1.0000 3.000 1.0000 1.0000 1.0000 3.0000 1.0000 1.0000 1.0000 1.0000 1.0000 60 11.8000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 61 12.0000 3.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 1.0000 3.0000 1.0000 1.0000 Top and bottom 10% of core excluded as per Technical Specifications.