ML021140022

From kanterella
Jump to navigation Jump to search

Technical Specification to Amendments 324, 324 & 325 Revising the TS to Eliminate the Use of the Term Unreviewed Safety Question, and Replace the Word Involve with the Word Require
ML021140022
Person / Time
Site: Oconee  Duke Energy icon.png
Issue date: 04/22/2002
From: Olshan L
NRC/NRR/DLPM
To:
Olshan L N, NRR/DLPM, 415-1419
References
TAC MB3710, TAC MB3711, TAC MB3712
Download: ML021140022 (1)


Text

Programs and Manuals 5.5 5.5 Programs and Manuals 5.5.15, Technical Specifications (TS) Bases Control Program (Continued)

b.

Licensees may make changes to Bases without prior NRC approval provided the changes do not require either of the following:

1.

A change in the TS incorporated in the license; or

2.

A change to the updated FSAR or Bases that requires NRC approval pursuant to 10 CFR 50.59.

c.

The Bases Control Program shall contain provisions to ensure that the Bases are maintained consistent with the UFSAR.

d.

Proposed changes that meet the criteria of 5.5.15.b.1 or 5.5.15.b.2 above shall be reviewed and approved by the NRC prior to implementation.

Changes to the Bases implemented without prior NRC approval shall be provided to the NRC on a frequency consistent with 10 CFR 50.71(e).

5.5.16 Safety Function Determination Program (SFDP)

This program ensures loss of safety function is detected and appropriate actions taken. Upon entry into LCO 3.0.6, an evaluation shall be made to determine if loss of safety function exists. Additionally, other appropriate limitations and remedial or compensatory actions may be identified to be taken as a result of the support system inoperability and corresponding exception to entering supported system Condition and Required Actions. This program implements the requirements of LCO 3.0.6. The SFDP shall contain the following:

a.

Provisions for cross train checks to ensure a loss of the capability to perform the safety function assumed in the accident analysis does not go undetected;

b.

Provisions for ensuring the plant is maintained in a safe condition if a loss of safety function condition exists;

c.

Provisions to ensure that an inoperable supported system's Completion Time is not inappropriately extended as a result of multiple support system inoperabilities; and

d.

Other appropriate limitations and remedial or compensatory actions.

Amendment Nos. 324, 324, 325 OCONEE UNITS 1, 2, & 3 5.0-24