ENS Event | |
|---|---|
05:00 Oct 16, 2015 | |
| Title | Part 21 Report - 2 Motors Were Not Properly Prepared Before Small Steel Shot Blasting |
| Event Description | The following information is an excerpt from an Howden North America email:
It was discovered that two motors being prepared for steel shot blasting prior to application of the coating system may not have been properly sealed allowing a small amount of small steel shot blast to enter into the motor. The two motors have been repaired and returned to FPL (Florida Power and Light Company), no further action is required. Customer: Florida Power and Light Company Location/Site: Turkey Point Motor Serial Numbers: GG153620115 and GG153620116 For questions and additional information, contact: J. Todd Gunvalson Director, Quality Howden North America 7909 Parklane Road Columbia, SC 29223 Phone 803-741-2716 |
| Where | |
|---|---|
| Howden North America, Inc. Columbia, South Carolina (NRC Region 1) | |
| Organization: | Howden North America, Inc. |
| Reporting | |
| 10 CFR 21.21(d)(3)(i), Failure to Comply or Defect | |
| Time - Person (Reporting Time:+1280.52 h53.355 days <br />7.622 weeks <br />1.754 months <br />) | |
| Opened: | J Todd Gunvalson 14:31 Dec 8, 2015 |
| NRC Officer: | John Shoemaker |
| Last Updated: | Dec 8, 2015 |
| 51592 - NRC Website | |
Howden North America, Inc. with 10 CFR 21.21(d)(3)(i), Failure to Comply or Defect | |
WEEKMONTHYEARENS 515922015-10-16T05:00:00016 October 2015 05:00:00
[Table view]10 CFR 21.21(d)(3)(i), Failure to Comply or Defect Part 21 Report - 2 Motors Were Not Properly Prepared Before Small Steel Shot Blasting 2015-10-16T05:00:00 | |