05000416/FIN-2015004-01

Finding

Title

Failure to Have Appropriate Instructions for Preventative Maintenance on the Division I Diesel Generator Simulated Run

Description

The inspectors reviewed a self-revealing non-cited violation of Technical Specification 5.4.1.a, for the failure to establish adequate instructions to perform a simulated surveillance on the division I diesel generator. Specifically, the simulated surveillance run instructions verified the trip high vibration (E-23H) valve was open, but it did not close the (E-23H) valve following the run to ensure the high vibration trip was bypassed. As a result, the division I diesel generator spuriously tripped on high vibrations during the November 21, 2015, run and was rendered inoperable and unavailable. On November 22, 2015, the licensee closed the trip high vibration (E-23H) valve and successfully ran the division I diesel generator to return it to operable status. The licensee entered this issue into their corrective action program as Condition Report CR-GGN-2015-6831. The failure to establish adequate preventative maintenance instructions to perform a division I diesel generator simulated run and return the valve lineup to the required position was a performance deficiency. This performance deficiency is more than minor, and therefore a finding, because it is associated with the equipment performance attribute of the Mitigating Systems Cornerstone and adversely affected the cornerstone objective to ensure the availability, reliability, and capability of systems that respond to initiating events to prevent undesirable consequences. Specifically, following the division I diesel generator simulated run, the preventative maintenance instruction did not require the licensee to close the trip high vibration (E-23H) valve, and therefore the high vibration trip capability remained for a duration of approximately 16 hours1.851852e-4 days <br />0.00444 hours <br />2.645503e-5 weeks <br />6.088e-6 months <br />. As a result, during the November 21, 2015 run, the diesel generator spuriously tripped on an invalid high vibration signal and was rendered inoperable and unavailable. Using Inspection Manual Chapter 0609, Appendix A, The Significance Determination Process (SDP) for Findings At-Power, and Inspection Manual Chapter 0609, Appendix A, Exhibit 2, Mitigating Systems Screening Questions, the inspectors determined that the finding is of very low safety significance (Green) because it: (1) was not a deficiency affecting the design or qualification of a mitigating structure, system, or component, and did not result in a loss of functionality; (2) did not represent a loss of system and/or function; (3) did not represent an actual loss of function of at least a single train for longer than its technical specification allowed outage time, or two separate safety systems out-of-service for longer than their technical specification allowed outage time; and (4) did not represent an actual loss of function of one or more non-technical specification trains of equipment designated as high safety significant in accordance with the licensees maintenance rule program. The inspectors determined that the finding has a design margin cross-cutting aspect within the human performance area because the licensee failed to ensure margins are carefully guarded and changed only through a systematic and rigorous process. Specifically, the licensee failed to fully implement their design change process such that all effected station documents and procedures were identified and revised after removing the high vibration trip for the division I and division II diesel generators [H.6].

01
Site:	Grand Gulf
Report	IR 05000416/2015004 Section 1R12
Date counted	Dec 31, 2015 (2015Q4)
Type:	NCV: Green
cornerstone	Mitigating Systems
Identified by:	Self-revealing
Inspection Procedure:	IP 71111.12
Inspectors (proximate)	D Loveless E Simpson G Guerra G Pick G Warnick H Freeman J Buchanan M Phalen M Young N Day N Greene
Violation of:	Technical Specification - Procedures Technical Specification
CCA	H.6, Design Margins
INPO aspect	WP.2
'
v • d • e

Finding - Grand Gulf - IR 05000416/2015004

1(6)2(5)3(1)4(6)5(0)6(0)7(11)8(4)201(6)301(1)402(0)403(0)404(3)405(4)406(1)501(0)

IR 05000416/2015004: 1 2 3 4 5 6

Finding List (Grand Gulf) @ 2015Q4

CCA Matrix: 2015Q4

	Q	CCA	Title
05000416/FIN-2015001-02	2015Q1	H.12	Failure to Follow a Procedure Resulting in the Unplanned Inoperability of the Reactor Core Isolation Cooling System
05000416/FIN-2015001-05	2015Q1	H.8	Failure to Establish, Implement, and Maintain Appropriate Changes to the Offsite Dose Calculation Manual For REMP Airborne Sampling
05000416/FIN-2015001-04	2015Q1	H.1	Failure to Properly Calibrate Main Steam Line Radiation Monitors and Containment/Drywall High Range Radiation Monitors
05000416/FIN-2015001-03	2015Q1	P.2	Emergency Action Level Scheme for Nonfunctional Seismic Monitor
05000416/FIN-2015201-06	2015Q1		Security
05000416/FIN-2015201-05	2015Q1		Security
05000416/FIN-2015201-04	2015Q1		Security
05000416/FIN-2015201-03	2015Q1		Security
05000416/FIN-2015201-02	2015Q1		Security
05000416/FIN-2015201-01	2015Q1		Security
05000416/FIN-2015001-01	2015Q1		Failure to Take Timely Corrective Actions Associated with Division 1 and 2 Standby Service Water Pump House Ventilation System Due to Degraded Relays
05000416/FIN-2015001-06	2015Q1		Failure to Adequately Establish Commercial-Grade Items as Basic Components
05000416/FIN-2015002-03	2015Q2		Failure to the Update the Final Safety Analysis Report after the Extended Power Uprate
05000416/FIN-2015002-04	2015Q2		Possible Loss of Communications Systems during Control Room Fire Scenarios
05000416/FIN-2015002-01	2015Q2	H.12	Failure to Have Appropriate Instructions Resulted in the Unplanned Unavailability of the Reactor Core Isolation Cooling System
05000416/FIN-2015002-02	2015Q2	H.12	Failure to Identify High Vibration on the Division 3 EDG Soak Back Oil Pump
05000416/FIN-2015405-01	2015Q3		Security
05000416/FIN-2015003-01	2015Q3		Failure to Have Appropriate Instructions for Preventative Maintenance on the Division II Diesel Generator Fuel Rack Control Lever
05000416/FIN-2015007-05	2015Q4		Failure to Maintain a Safety-Related Cable Tray Overfill Analysis Record
05000416/FIN-2015007-02	2015Q4	H.6	Failure to Ensure that Electrical Interrupting Devices are Rated for Available Fault Current Levels
05000416/FIN-2015004-03	2015Q4		Failure to Make a Required Eight-Hour Report for Loss of Safety Function
05000416/FIN-2015007-07	2015Q4		Failure to Update the Final Safety Analysis Report
05000416/FIN-2015008-03	2015Q4	H.12	Failure to Declare Secondary Containment Inoperable Based on Failed Surveillance Testing
05000416/FIN-2015404-03	2015Q4		Security
05000416/FIN-2015404-02	2015Q4		Security
05000416/FIN-2015404-01	2015Q4		Security
05000416/FIN-2015007-08	2015Q4		Incomplete and Inaccurate Response to NRC Bulletin 88-04
05000416/FIN-2015008-04	2015Q4		Failure to Make Required Event Notification
05000416/FIN-2015007-03	2015Q4	S.4(o)	Lack of Coordination of Division III HPCS Switchgear 127N Undervoltage Relays
05000416/FIN-2015007-01	2015Q4		Failure to Ensure Safety-Related Alternating Current and Direct Current Equipment Operability and Functionality at Maximum Allowable Voltage Levels
05000416/FIN-2015008-01	2015Q4	P.1	Failure to Enter a Condition Adverse to Quality into the Corrective Action Program
05000416/FIN-2015007-04	2015Q4	H.8	Failure to Identify and Address Impacts of Revised Calculation Output Data
05000416/FIN-2015007-06	2015Q4		Failure to Perform Surveillance Requirement 3.8.1.9
05000416/FIN-2015007-09	2015Q4		Failure to Obtain a License Amendment for Use of Probabilistic Methods to Evaluate Tornado Missile Hazards
05000416/FIN-2015007-10	2015Q4	P.6	Failure to Ensure Equipment Operability and Functionality of Allowable Alternating Current Frequency Range
05000416/FIN-2015007-11	2015Q4	H.12	Failure to Implement Equipment Control Procedures for Loose Items in Containment
05000416/FIN-2015004-04	2015Q4		Failure to Establish Adequate Maintenance Instructions to Perform Work Activities on the Division III Diesel Generator Overspeed Trip Limit Switch
05000416/FIN-2015004-02	2015Q4	H.14	Failure to Timely Enter Technical Specification Surveillance Requirement 3.0.1
05000416/FIN-2015004-01	2015Q4	H.6	Failure to Have Appropriate Instructions for Preventative Maintenance on the Division I Diesel Generator Simulated Run
05000416/FIN-2015301-01	2015Q4	H.8	Inadequate Plant Operating Procedures with Eight Examples
05000416/FIN-2015008-02	2015Q4	P.1	Failure to Promptly Initiate Condition Reports

Self-Identified List (Grand Gulf)

	Q	Title
05000416/FIN-2015002-05	2015Q2	Licensee-Identified Violation
05000416/FIN-2015405-02	2015Q3	Licensee-Identified Violation
05000416/FIN-2015405-03	2015Q3	Licensee-Identified Violation
05000416/FIN-2015405-04	2015Q3	Licensee-Identified Violation
05000416/FIN-2015406-01	2015Q3	Security
05000416/FIN-2015004-05	2015Q4	Licensee-Identified Violation
05000416/FIN-2015004-06	2015Q4	Licensee-Identified Violation

[Grand Gulf Findings full list]

05000416/FIN-2015004-01

Navigation menu

Search