Weld maps are isometric drawings of the assembly to be welded showing the location with each weld, each weld having its own unique identifying number. They also contain a bill of material with the part number of each component used in making the assembly. After each weld is completed, it is labeled with a weld number (usually pin stamped on the part) that corresponds to a number on the isometric drawing of the part.
|
|---|
|
Accumulator, Annulus, Babbitt, Backflow preventer, Backseat, Bellows, Berm, Bonnet, Bore, Bourdon tube, Braze, Check valve, Clam shell, Clevis, Cotter pin, Coupling, Cremone, Damper, Densitometer, Diaphragm, Differential flow, Door closer, Dowel, Fire wrap, Flange, Fuel injector, Full out position, Fuller's earth, Galling, Gasket, Gauge, Globe valve, Grommet, Grout, Header, Heat number, Heat trace, Hoop stress, Lagging, Lash adjuster, Louver, Lube oil, Magnatorque, Manifold, Muffin fan, Overtravel, Penetration, Puff test, Reboiler, Safe end... further results |