|
---|
Category:Drawing
MONTHYEARL-20-234, 3 to Updated Final Safety Analysis Report, Drawings - Part 7 of 7 (Redacted)2020-09-25025 September 2020 3 to Updated Final Safety Analysis Report, Drawings - Part 7 of 7 (Redacted) ML20302A3392020-09-25025 September 2020 3 to Updated Final Safety Analysis Report, Drawings - Part 3 of 7 ML20302A3432020-09-25025 September 2020 3 to Updated Final Safety Analysis Report, Drawings - Part 2 of 7 ML20302A3412020-09-25025 September 2020 3 to Updated Final Safety Analysis Report, Drawings - Part 4 of 7 ML20302A3372020-09-25025 September 2020 3 to Updated Final Safety Analysis Report, Drawings - Part 1 of 7 ML20302A3402020-09-25025 September 2020 3 to Updated Final Safety Analysis Report, Drawings - Part 5 of 7 ML20302A3382020-09-25025 September 2020 3 to Updated Final Safety Analysis Report, Drawings - Part 6 of 7 ML17045A4862016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Drawing M-536-00016, Rev 14 ML17045A5532016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Drawing M-536-00059, Rev 13 ML17039A7612016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Drawing E-030-00005, Rev 6 ML17045A4312016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Drawing M-536-00001, Rev 3 ML17045A5032016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Drawing M-536-00041, Rev 8 ML17045A4902016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Drawing M-536-00029, Rev 13 ML17039A7662016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Drawing E-030-00016, Rev 21 ML17045A5012016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Drawing M-536-00039, Rev 14 ML17045A5192016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Drawing M-536-00057, Rev 7 ML17045A5552016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Drawing M-536-00061, Rev 6 ML17045A5582016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Drawing M-536-00064, Rev 12 ML17045A4922016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Drawing M-536-00031, Rev 9 ML17045A4872016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Drawing M-536-0001, Rev 12 ML17045A5162016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Drawing M-536-00054, Rev 11 ML17045A4882016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Drawing M-536-00018, Rev 12 ML17039A9362016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Drawing E-030AQ-00036, Rev 2 ML17045A5652016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Drawing M-536-00071, Rev 5 ML17045A4852016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Drawing M-536-00015, Rev 11 ML17045A5092016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Drawing M-536-00047, Rev 8 ML17045A4302016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Drawing M-180Q-00014, Rev 13 ML17045A4822016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Drawing M-536-00012, Rev 14 ML17039A7982016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Dwg E-030-00037, Rev 20, ML17039A8042016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Dwg E-030-00047, Rev 15, ML17045A4912016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Drawing M-536-00030, Rev 6 ML17039A8152016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Dwg E-030-00345, Rev 1 ML17039A8142016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Dwg E-030-00344, Rev 1 ML17039A8062016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Dwg E-030-00340, Rev 1 ML17039A8122016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Dwg E-030-00342, Rev 2 ML17045A5682016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Drawing M-536-00073, Rev 5 ML17039A8112016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report Dwg E-030-00341, Rev 2 ML17039A8132016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Dwg E-030-00343, Rev 3 ML17045A5642016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Drawing M-536-00070, Rev 8 ML17045A5562016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Drawing M-536-00062, Rev 7 ML17045A5112016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Drawing M-536-00049, Rev 13 ML17039A8172016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Dwg E-030-00346, Rev 4 ML17045A5572016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Drawing M-536-00063, Rev 7 ML17039A7642016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Drawing E-030-00014, Rev 15 ML17045A5152016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Drawing M-536-00053, Rev 7 ML17045A5122016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Drawing M-536-00050, Rev 6 ML17045A4962016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Drawing M-536-00035, Rev 9 ML17045A5172016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Drawing M-536-00055, Rev 11 ML17045A5702016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Drawing M-536-00075, Rev 11 ML17045A5072016-11-21021 November 2016 Revision 31 to Updated Final Safety Analysis Report, Drawing M-536-00045, Rev 9 2020-09-25
[Table view] |
Text
240 one bounda&y between the -Boric Acid Addition TUnks room forms As noted above, wll 2257, whih copartmentprsizaonuponaHELB within adjoining room and corridor 241, Would beluibjected to the :for 227.
corridor 241 not include witf 'isHEB model the 227. According to C-NSA000.024M, line in the representation of the HEB area on page 15byofthe by a 2dotted An artificl "banieef is indicated CONSA-00. 004 modeled as the Room 227 HELB aea is represented Calculation. The re that yellow area m Fig. S below.
l9lue AUX. Bldg. EleVation 565'-O" Walls that are colored &numbered are masonry walls.
Thinner red lines tire doors.
7 Room 227 HELBModel Are; H ' HELB Hold Door 22605
]orln;r~tan only rtOlTE Drawing Is a fough approximation 2 of the Room 227 HELB arashows the border of the area The drawing in Calculation C-NSA-00. masonr wals and solid doors.'7 As noted between concrete walls, with a solid line, nottodistinuishig opening Cordor 241 and the doorway to Room 232 were shown as dotted lines indicatng above, the borders without barries._,r,.-.
OE 2-M0037 Diesel Fire Pump can not be prperly cooled during forebay 02-03347 53/ Maintenance to 07119102 temperatures '52 F orwhen attempftng 4o pump and Icelwater slurty. Implement
__I_ mplement ECR 0340625.
OE 03.0006 Decay Heat Pump #1vbrationlievels higher than normal. 03-01399 05/17/04 Order In Planning 02h9/03 Order 200049138. 03-07021 EDG # and #2 do not meet lSARquirements duri Integrated Submittal SFAS tesing. At time zero. It does ni meet Ninimum frequency and Feb 2004 10E 03iO009 voltage requirements. Approval Rei Affairs 02114103 LAR 03-0017 submittal b NRCthenf NRC spproat. 03-00949 10t2;YW Relmer OE 03-0015 Tomado differential pressure and seismic analysis of masonry walls In 02-07989 10114/02 the Aux Building. Revise masonry wall caics under CR 03-2910. 03.01132 032910 12tl5104 DES 03-0399 Bair The Station Batteries 2N and 2P have ei with degraded positive end Mid-Cycle OE 03-0016 plate supports. 03-05984 Outage Orders in Planning 0725/03 Repace battery2N rder 200008602. 03-06 Replace ibattery 2P, Vrder20008585.
OE 03-O019 .EDG Fuel Oil Tank-(Week Tank) 12 Transfer Pump Motor hasl Order h Plannig 08/it/03 insulation resistance. FReplace MP105 2 Order 200067207. 63-06665 111104 l_ Planning
- OE 021 CAC SW Piping Design Temperature & Transient Leads. 03.04655 DES 08112103 Evaluate SW pipinn stresses based upon change In therma1 boads. 03-06651 09101l04 Hookc OE V3-0323 Intake Structure Fan MC099-3 (SW Vent Fan #3) is operating at I 1 % PES 07/14103 full bad amps. System inoperable tt gerater than 86F ambient air 03-05616 3/1504 Malnhardt temperature. ECR 03-0481-00.
OE 03-0032 Service Water tow requirements. 03*7524 09/09M3 Fornal design bas'Is ko SW11ow6oW;REVS. calcs, procedures O 031
.and instrumentation. 0348367 DES
' 03-9568 03t22104 Na]Uth Decay Heat -13A. 13B, 14A and 14B Seat Leakage.
OE 03.0039 DevelopECR 0307 for DH13s nd DF14%. 0715W04 DES 10/08/03 Implement ECR 03-0579. Ma0623 12115/05 Na uch Diesel Generators #1and #2 tubing clanWsinstalledhncorrectiy.
GE03-03042 Determine correct damp installation. Install dimps correctly, as 03/0504. DES- Ridlon
.12)16/03 needed. 03-10956 DH61,*OH Pump I Discharge to Uake-up and Puification and Spent
`E .03-M4 Fuel Pool Demineratzer Isolation, valve leakby. Rework DFHI1, Order 03S-880 14RFO Steagall 101.5/03 200065416. 03-10966 EDG load rating at 65F outdoor destgn temperature should be less QE 03-0044 than Tech Spec rating Nf2838 Kw St-90 F. Re-rate EDB at higher . 3/12/04 DES 11/24)03 ambient temperatures? PE-and DES to resolve differences. 0311148 Naluch
.OE 04-0002 Radiation Monitor Transmitters RT4597AA. RT4597AB. RT4597BA.
1/23104 RT45978E, RT459AA, RT4598AB, RT45988A and RT4598BB are 04059 2/27104 T. She"ic powered from 0 power sources using non-Q fuses And fuse blocks for Osaton. Replaceedstingfuses with equlvalentdQ uses.
OE 04-0003 Thee is a void In the hoor at the base of Door 428, the entrance lo Low 1254 Voltage Switchgear Rooth #1.This vodd was made during the recent 04-00832 2127 J. Brunkhorst HEL8 modification of Door428.
OE 04-0004 The High Pressure Injection (HPI) Pump minimum redrcilation flowrate 04-01050 SP3218 - B. Smith 2/6/04 design basis has been revised. The new minmumflow requirement for 2/1804 the HPI Pumps Is 53 to 57 gpm.
. DB-SP-03218 and DS-SP-03219 (HPI Pump 1 and 2 Quartey Tests) SP3219 -
acceptance criteria needs to oe revised to reflect the new recirculation 3/29/04
. flow requirements prior to Operations perfomiing these surveillance tests.
OE 04-0005 EDO #1 and #2 do not meet USAR requirements during a Loss of Off- 04-01214 Submittal Reg Affairs 2/13/04 site Power (LOOPX For Load steps I and 2, the EDG voltage -does not Feb 2004 Relmer meet minimum USAR requirements. For Load step 1, the EDM Approval frequency does not meet mfnimum USAR requirements. Load Step 1 Is 10122/04 bounded by the LOOP/LOCA event (evaluated under DE 03-0009).
while Load step 2 Is not bounded by the LOOP/LOCA evenL LAR 03-0017 submittal to NRC then NRC approval.