(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
A sleeve is a pipe interface built into a wall in order to allow cables or other pipes to pass through. Usually it refers to containment or wall penetrations.
See also
|
|---|
|
Accumulator, Annulus, Babbitt, Backflow preventer, Backseat, Bellows, Bonnet, Bore, Bourdon tube, Braze, Check valve, Clam shell, Clevis, Cotter pin, Coupling, Cremone, Damper, Densitometer, Diaphragm, Differential flow, Door closer, Dowel, Fire wrap, Flange, Full out position, Fuller's earth, Galling, Gasket, Gauge, Globe valve, Grommet, Grout, Header, Heat number, Heat trace, Hoop stress, Lagging, Lash adjuster, Louver, Lube oil, Magnatorque, Manifold, Muffin fan, Overtravel, Penetration, Reboiler, Safe end, Shim, Short cycling, Skid... further results |