ML13093A317

From kanterella
Revision as of 22:31, 17 March 2019 by StriderTol (talk | contribs) (Created page by program invented by StriderTol)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Invensys Operations Management Document 993754-1-906, Revision 2, Software Development Plan.
ML13093A317
Person / Time
Site: Diablo Canyon  Pacific Gas & Electric icon.png
Issue date: 12/18/2012
From: McKay J
Invensys Operations Management, Invensys/Triconex
To:
Office of Nuclear Reactor Regulation
References
DCL-13-028 993754-1-906, Rev 2
Download: ML13093A317 (53)
v • d • e


Text

Attachments 9-14 to the Enclosure contain Proprietary Information

-Withhold Under 10 CFR 2.390 Enclosure Attachment 7 PG&E Letter DCL-13-028 Invensys Operations Management Document "993754-1-906, Revision 2, Software Development Plan" (Non-Proprietary)

Attachments 9-14 to the Enclosure contain Proprietary Information When separated from Attachments 9-14 to the Enclosure, this document is decontrolled.

i nve. n s'.ýs Operations Management i n Ve. n s'.s Triconex Project: IPG&E PROCESS PROTECTION SYSTEM REPLACEMENT Purchase Order No.: F35000897372 Project Sales Order: 1993754 PACIFIC GAS & ELECTRIC COMPANY NUCLEAR SAFETY-RELATED PROCESS PROTECTION SYSTEM REPLACEMENT DIABLO CANYON POWER PLANT SOFTWARE DEVELOPMENT PLAN (SDP)Document No. 993754-1-906

(-NP)Revision 2 December 18,2012 I I Non -Proprietary copy per 1 OCFR2.390-Areas of Invensys Operations Management proprietary information, marked as [P], have been redacted based on I OCFR2.390(a)(4).

I i n v'e. n s'.ýj s" fTM n V i n. ve. n. s'Operations Management Triconex Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 2 of 52 Date: 12/18/2012 Document Change History Revision Date Change Author 0 8/17/2011 Initial issue K. Harris 1 7/11/2012 K. Hamrs Updated the following Software Life Cycle Process flow charts: Planning Phase" Removed "Software Project Risk Management Plan" from the Planning Phase outputs. This information will be included in the PMP." Re-ordered the Planning Phase Outputs.Requirements Phase* Removed "System Design Basis, if required" from the requirements Phase outputs. This document is not required for this project.Design Phase" Added "Hardware Design Description"* Removed "Software Architecture Description" from flow chart and Phase outputs. This is being replaced by the Hardware and Software Design Descriptions.

  • Added "Reliability Analysis" to flow chart and Phase outputs.* Added "Coding Guidelines" to flow chart and Phase outputs.* Re-ordered Design Phase Outputs.* Minor changes to flow chart to accommodate adding and deleting items, added missing line end arrows.Test Phase* Added Hardware Design Description to the Test Phase Inputs In Section 3, the names of the project team members were replaced with their corresponding position titles.Throughout the document various editorial changes.In Table 5 Added ND as the responsible Organization.

A. .L I I i n ve.n So TM in ve.n s'.w s'Triconex Operations Management Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 3 of 52 Date: 12/18/2012 In Section 2.3.3 and 2.4.3, reordered Table 4 and 5 and the following paragraphs to match the output list in the Software Life Cycle Process flow charts.Added Reference 1.3.3.12 Software Configuration Management Plan.Edited 3.1.1 to reflect the use of standalone laptops for development.

Added section 3.2.6 Problem Reporting and Corrective Action.2 12/18/12 2.5.3.8 Replaced "Test Case Incident Reports" with J. McKay"System Integration Deficiency Reports" 3.1.2 Removed reference to Project team use of the TriStation Emulator.Updated footer to replace Triconex with Invensys as document owner.I n V e.ns-. sv Operations Management Triconex Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 4 of 52 Date: 12/18/2012 Table of Contents L ist of T ables ............................................................................................................

6 L ist of Figures ...........................................................................................................

7 1. Introduction

....................................................................................................

8 1.1. Purpose and Scope ................................................................................................

.... 8 1.2. O rganization of Softw are Life Cycle Processes

............................................................

8 1.3. References

..........................................................................................................................

10 1.3.1. NRC References

................................................................................................

10 1.3.2. IEEE Standards

................................................................................................

10 1.3.3. Applicable Internal Documents and References

...............................................

10 1.3.4. A cronym s ..........................................................................................................

10 2. L ife C ycle Processes

.....................................................................................

13 2.1. A cquisition Phase ..........................................................................................................

23 2.1.1. A cquisition Phase Inputs ..................................................................................

23 2.1.2. A cquisition Phase Activities

.............................................................................

23 2.1.3. A cquisition Phase Outputs ................................................................................

23 2.2. Planning Phase ...................................................................................................................

23 2.2.1. Planning Phase Inputs ......................................................................................

23 2.2.2. Planning Phase A ctivities

...............................................................................

24 2.2.3. Planning Phase Outputs ....................................................................................

24 2.3. Requirem ents Phase .....................................................................................................

26 2.3.1. Requirements Phase Inputs ....................................

26 2.3.2. Requirem ents Phase A ctivities

........................................................................

26 2.3.3. Requirem ents Phase Outputs ..........................................................................

26 2.4. D esign Phase ......................................................................................................................

29 2.4.1. D esign Phase Inputs .........................................................................................

29 2.4.2. D esign Phase A ctivities

....................................................................................

29 2.4.3. D esign Phase Outputs ......................................................................................

29 2.5. Im plem entation Phase ..................................................................................................

32 2.5.1. Im plem entation Phase Inputs ...........................................................................

32 2.5.2. Im plem entation Phase A ctivities

......................................................................

32 2.5.3. Im plem entation Phase Outputs ........................................................................

33 2.6. Test Phase ..........................................................................................................................

35 2.6.1. Test Phase Inputs .............................................................................................

35 2.6.2. Test Phase A ctivities

.........................................................................................

35 2.6.3. Test Phase Outputs ............................................................................................

36 2.7. D elivery Phase ...................................................................................................................

37 2.7.1. D elivery Phase Inputs ......................................................................................

37 I i n V e. n s"j s"* "TM in N e. n s'. s" Operations Management Triconex Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 5 of 52 Date: 12/18/2012

2.7.2. Delivery

Phase Activities

..................................................................................

37 2.7.3. Delivery Phase Outputs .....................................................................................

38 3. M ethods, Tools and Techniques

.................................................................

39 3.1. Computing systems to be used for software development

............................................

39 3.1.1. Equipment for Planning and Development

......................................................

39 3.1.2. Tools for Development and Verification

..........................................................

39 3.1.3. Equipment for Testing ......................................................................................

39 3.1.4. PG&E Equipment

...........................................................................................

39 3.2. M ethods ..............................................................................................................................

40 3.2.1. Independent Verification and Validation

........................................................

40 3.2.2. Testing ...................................................................................................................

40 3.2.3. Safety Analysis (Criticality/Hazard/Risk/Interface)

.......................................

40 3.2.4. Baseline Review ..............................................................................................

40 3.2.5. Independent Design Verification

......................................................................

40 3.2.6. Problem Reporting and Corrective Action .....................................................

40 3.3. Tools ..................................................................................................................................

41 3.4. Development methods ..................................................................................................

41 3.4.1. Requirements Phase: .........................................................................................

41 3.4.2. Design Phase: ..................................................................................................

41 3.4.3. Implementation Phase: ....................................................................................

41 3.4.4. Test Phase: .......................................................................................................

42 3.5. Technical standards to be followed ..............................................................................

42 3.6. Technical Documentation

...........................................................................................

42 4. Standards

......................................................................................................

50 I i n v'e. n s'.y s" Operations Management i n V e. n s-. s" Triconex Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 6 of 52 Date: 12/18/2012 List of Tables Table 1 Life Cycle M apping .......................................................................................................

9 Table 2. A cquisition Phase Outputs .........................................................................................

23 Table 3 Planning Phase Outputs ..............................................................................................

24 Table 4. Requirem ents Phase Outputs ......................................................................................

26 Table 5 D esign Phase Outputs ..................................................................................................

29 Table 6. Im plem entation Phase Output .....................................................................................

33 Table 7 Test Phase Output .......................................................................................................

36 Table 8 D elivery Phase Outputs .............................................................................................

38 I i n v e.n s!.! s" TM Operations Management in V e. n s'.t s" Triconex Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 7 of 52 Date: 12/18/2012 List of Figures Figure 1. PPS Replacement Project Software Life Cycle Process Overview ...........................

15 Figure 2. Software Life Cycle Process: Acquisition Phase .....................................................

16 Figure 3. Software Life Cycle Process: Planning Phase ...........................................................

17 Figure 4. Software Life Cycle Process: Requirements Phase ...................................................

18 Figure 5. Software Life Cycle Process: Design Phase .............................................................

19 Figure 6. Software Life Cycle Process: Implementation Phase ...............................................

20 Figure 7. Software Life Cycle Process: Test Phase ..................................................................

21 Figure 8. Software Life Cycle Process: Delivery Phase ..........................................................

22 I i n v'e. n s ".js eM i n. V e. n. s".V s" Operations Management Triconex Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 8 of 52 Date: 12/18/2012

1. Introduction This Software Development Plan (SDP) is a controlling document that outlines a plan for the software development effort. The software will be used in the Pacific Gas & Electric (PG&E)Diablo Canyon Power Plant (DCPP) Process Protection System (PPS) Project.1.1. Purpose and Scope The Software Development Plan defines the life cycle phases of the software development process. The SDP provides the project team with the technical information, required for carrying out the development project.The purpose of this SDP is to:* Define an approach to the software development process, which increases the likelihood of detection of human errors and reduces overall risk.* Define the technical development activities performed in each phase of the development process and how they will be connected to other development activities.
  • Describe the methods, tools, and techniques to be used during the design, analysis, development, testing, and integration of the software.* Describe the personnel or groups responsible for development, validation, and verification of various design outputs.* Guide the technical aspects of the development project.* Define the assumptions on the overall software lifecycle." Establish a safety-assured and consistent implementation of the final software product.This SDP is intended for use in the development of software for nuclear safety-related applications that conform to the requirements of 10 CFR 50 Appendix B. The SDP is written to comply with RG 1.173 [Reference 1.3.1.4] and Institute of Electrical and Electronics Engineers (IEEE) Std. 1074 [Reference 1.3.2.1].1.2. Organization of Software Life Cycle Processes This SDP utilizes a modified waterfall model for the software development lifecycle process.The lifecycle model is illustrated in Figure 1 and described in detail in Sections 2.1 through 2.7.The PG&E DCPP PPS Replacement Project requires a life cycle that consists of several key phases. The overlap between the DI&C-ISG-06

[Reference 1.3.1.6] Licensing Amendment Request review phases and the Nuclear System Integration Program Manual (NSIPM)[Reference 1.3.3.1] project lifecycle phases is shown in Table 1, below. Section 1.2 of the PG&E DCPP PPS Project Management Plan [Reference 1.3.3.3] provides more detail on the DI&C-ISG-06 Enclosure B documents.

These documents will be produced during PPS Replacement Project Phases 1 and 2.I n ve. n s.y s-TM Operations Management i n v'e.n s, Triconex Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 9 of 52 Date: 12/18/2012 The following table lists the phases or activity groups of the development life cycle.Table 1 Life Cycle Mapping PPS Project DI&C-ISG-06 NSIPM Project Lifecycle Phase Enclosure B Phase 1 Phase 1 Acquisition Planning Requirements Phase 2 Phase 2 Design Implementation Test Delivery Phase 3 Scope of Supply To Be Determined RG 1.152 [Reference 1.3.1.2], RG 1.173, and IEEE Std. 1074 provide the basis for the software development lifecycle described in this SDP.I i n v'e. n s'.y s,* "TM in. V'e. n s'.ý. s" Operations Management Triconex Document:

1993754-1-906 Title: Software Development Plan Revision:

2 Page: 10 of 52 Date: 12/18/2012

1.3. References

1.3.1. NRC References 1.3.1.1. NUREG/CR-6463, Revision 1, "Review Guidelines for Software Languages for Use in Nuclear Power Plant Safety Systems," August 1997 1.3.1.2. RG 1.152, Revision 3, Criteria for Use of Computers in Safety Systems of Nuclear Power Plants 1.3.1.3. RG 1.172, Revision 0, Software Requirements Specifications for Digital Computer Software Used in Safety Systems of Nuclear Power Plants 1.3.1.4. RG 1. 173, Revision 0, Developing Software Life Cycle Processes for Digital Computer Software Used in Safety Systems of Nuclear Power Plants 1.3.1.5. United States Nuclear Regulatory Commission (NRC) Digital Instrumentation and Controls Interim Staff Guidance 4, (DI&C ISG-04)1.3.1.6. United States Nuclear Regulatory Commission (NRC) Digital Instrumentation and Controls Interim Staff Guidance 6 (DI&C-ISG-06) 1.3.2. IEEE Standards 1.3.2.1. IEEE 1074-1995, IEEE Standard for Developing Software Life Cycle Processes 1.3.2.2. IEEE 830-1993, IEEE Recommended Practice for Software Requirements Specifications

1.3.3. Applicable

Internal Documents and References 1.3.3.1. Coding Guidelines 993754-1-907 1.3.3.2. Nuclear Systems Integration Program Manual, (NSIPM) NTX-SER-09-21, Revision 1, dated July 9, 2010 1.3.3.3. Project Management Plan, 993754-1-905 1.3.3.4. Project Quality Plan 993754-1-900 1.3.3.5. Project Traceability Matrix, 993754-1-804 1.3.3.6. Purchase Order Compliance Matrix, 993754-1-800 1.3.3.7. Software Safety Plan, 993754-1-911 1.3.3.8. Software Verification and Validation Plan, 993754-1-802 1.3.3.9. Triconex Project Procedures Manual 1.3.3.10.

Project Instruction 7.0 "Application Program Development for the PG&E DCPP PPS Replacement Project, 993754-1-951" 1.3.3.11.

Tricon V 10 Nuclear Qualified Equipment List (NQEL) 9100150-001 1.3.3.12.

Software Configuration Management Plan, 993754-1-909

1.3.4. Acronyms

AFW Auxiliary Feedwater ALS Advanced Logic System I vn Ve. n s'.iy s"*"TM i n V e. n s .u s" Operations Management Triconex Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 11 of 52 Date: 12/18/2012 ANSI American National Standards Institute ASME American Society of Mechanical Engineers CASE Computer-Assisted Software Engineering CDD Conceptual Design Document CFR Code of Federal Regulations DCPP Diablo Canyon Power Plant DI&C Digital Instrumentation and Controls EMI Electromagnetic Interference ESFAS Engineered Safety Feature Actuation System FAT Factory Acceptance Test FMEA Failure Modes and Effects Analysis FRS Functional Requirements Specification HRS Hardware Requirements Specification HSI Human-System Interface HVT Hardware Validation Test I/O Input/Output IEC International Electrotechnical Commission IEEE Institute of Electrical and Electronics Engineers IOM Invensys Operations Management IRS Interface Requirements Specification ISG Interim Staff Guidance IV&V Independent Verification and Validation LAR License Amendment Request LLR Lessons Learned Report LOE Level of Effort LTOPS Low Temperature Overpressure Protection System MCB Main Control Board MCL Master Configuration List MDM Manufacturing Department Manual ND Nuclear Project Delivery NQA Nuclear Quality Assurance NRC U.S. Nuclear Regulatory Commission NSIPM Nuclear System Integration Program Manual OPDT Over-Power Delta-T OTDT Over-Temperature Delta-T PE Project Engineer PG&E Pacific Gas & Electric Company PMP Project Management Plan PO Purchase Order POCM Purchase Order Compliance Matrix PPM Project Procedures Manual I i n v'e. n s.s TM n v/e. n s'Operations Management Triconex Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 12 of 52 Date: T -12/18/2012 PQAE Project Quality Assurance Engineer PQAM Project Quality Assurance Manager PQP Project Quality Plan PPS Process Protection System PRC Project Review Committee PT2 File extension for the TriStation 1131 application code, i.e., *.PT2 PTM Project Traceability Matrix PWR Pressurized Water Reactor QA Quality Assurance QC Quality Controls QPM Quality Procedures Manual RFI Radio-Frequency Interference RG Regulatory Guide RHR Residual Heat Removal RTS Reactor Trip System RXM Remote Extender Module, Remote Expansion Chassis S/G Steam Generator SAD System Architecture Description SAT Site Acceptance Test SCMP Software Configuration Management Plan SDD Software Design Description SDP Software Development Plan SER Safety Evaluation Report SI Safety Injection SIL Software Integrity Level SIntP Software Integration Plan SLC Software Life Cycle SLCP Software Life Cycle Process SQAP Software Quality Assurance Plan SRS Software Requirements Specification SSP Software Safety Plan SSPS Solid State Protection System SVVP Software V&V Plan SWR Software Walkthrough Report TCM Tricon Communications Module TRL Technical Requirements List TS 1131 TriStation 1131 TSAP TriStation Application Program V&V Verification and Validation i n v'e. n s'.ý= s" i f V*T2 in V e.n 5n " Operations Management Triconex Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 13 of 52 Date: 12/18/2012

2. Life Cycle Processes The DCPP PPS Replacement Project will utilize a modified waterfall life cycle model as identified below. The software life cycle applicable to this project is illustrated in Figures 1-8.The life cycle phases, as well as their inputs and outputs, are described in Sections 2.1 through 2.7.The software life cycle applicable to this project is illustrated in Figures 1-8. The life cycle phases, as well as their inputs and outputs, are described in Sections 2.1 through 2.7.The phases are as follows: " Acquisition Phase -Request for Quote assistance and Purchase Order Review* Planning Phase -Project Schedule, Planning Documents, Master Configuration List* Requirements Phase -Software Requirements Specification, Hardware Requirements Specification, and Project Traceability Matrix." Design Phase -Software Design Description, Design Drawings, Project Traceability Matrix* Implementation Phase -Project Software Application Development, Verification Document Development and Test Procedure/Test Cases execution, Hardware Assembly" Test Phase -Acceptance Test Procedure Development, Project Traceability Matrix, Factory Acceptance Test Execution" Delivery Phase -Package System for Shipment, Certificate of Conformance, System Shipment The typical waterfall life cycle would continue with the Installation/Acceptance Testing Phase, Operation Phase, Maintenance Phase and Retirement Phase. These phases are not within the scope of the DCPP PPS Replacement Project for Invensys Operations Management and therefore are not included in the modified waterfall life cycle.Phase Completion Meetings shall be held by the Project Review Committee (PRC) at the completion of the Requirements, Design, Implementation, and Test Phases. The PRC shall assess the risks and make recommendations for incorporating lessons learned prior to starting activities associated with the next project phase. The Project Review Committee (PRC) shall meet for project related activities, with the minimum PRC members for each activity as defined below: I i n v'e. n s'.> s" 0 *TM Operations Management i nve. ns'.us" Triconex Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 14 of 52 Date: 12/18/2012 PRC Members PM, PE, PQAE,*IV&V/TD;Customer as applicable.

PM, PE, PQAE,*IV&V/fD PM, PE, PQAE,*IV&V/TD Project Activities Test Activities

-Approve test procedures, release for test, review and evaluate test results to determine acceptability of the tests, and to discuss any problems identified during the testing, e.g., test procedure problems (ICNs issued), test failures/test anomalies (SIDRs issued), etc.Additionally, any lessons learned should be discussed during the meeting.Phase Exit -Review project activities associated with the major project phases (requirements, design, implementation, and test) and evaluate the risks and provide recommendations associated with lessons learned prior to entering the next project phase. The phase summary reports provide metrics that should be considered when evaluating the risks for entering the next project phase (see PPM 7.02 for phase summary report details).Other -Review and/or evaluate additional project activities as deemed appropriate by the Project Manager.*For testing activities, the Test Director for the specific activity (e.g., HVT, FAT, etc.) should represent Nuclear IV&V at the PRC meetings.The PM is responsible for developing and issuing PRC meeting minutes which provide an overview of the PRC meeting.When deemed appropriate by the Project Manager, a conditional release may be initiated to allow activities in a subsequent phase to be performed prior to completing activities in the current phase. Prior to approval, the conditional release shall be reviewed by the PRC, and the customer, as required.Once a phase has been exited, minor changes to an approved document(s) may be processed with a successor document(s), e.g., the project is in the design phase and review of the SDD identifies minor changes to the SRS. In this case the SRS is not required to be approved prior to routing the SDD for review. The SRS and SDD can be routed for review together.

Major revisions to documents shall follow the normal process. This will require exiting the phase, where the revision is identified, and returning to the phase where the document to be revised had originated.

I i n v e. n S'..J S, TM i n V'e.n s'.y s" Triconex Operations Management Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 15 of 52 Date: 12/18/2012 Figure 1. PPS Replacement Project Software Life Cycle Process Overview I n v'e. n s" TM Operations Management inv'en ns'. s" Triconex Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 16 of 52 Date: 12/18/2012 EL I i n v'e. n s'.. s" TM Operations Management i n Ne. n 's-.. s" Triconex Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 17 of 52 Date: 12/18/2012 IEL i n v'e. n s" O en MTM Operations Management inv'en ns'.t s'Triconex Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 18 of 52 Date: 12/18/2012 IPD I i n v e. n s*. s.TM Operations Management i n vye.n 5".v s" Triconex-Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 19 of 52 Date: 12/18/2012 IEL I i n v e. nI s.>- s" TM Operations Management i n V e. n s-.

  • s" Triconex Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 20 of 52 Date: 12/18/2012 EL I in v'e. n s'.> s" TM Operations Management inv'e. ns'.u s" Triconex Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 21 of 52 Date: 12/18/2012 IEL I i n V e.n s-.y s" Operations Management i n V e.n s'.o s" Triconex Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 22 of 52 Date: 12/18/2012 wP i nV e. n s'.y s-on TM Operations Management in V e. n s'. s" Triconex Document:

993754-1-906 Tide: Software Development Plan Revision:

2 Page: 23 of 52 Date: 12/18/2012

2.1. Acquisition

Phase During the Acquisition Phase, the customer Request for Proposal and/or Purchase Order are received, reviewed.

The Purchase Order Compliance Matrix (POCM) [Reference 1.3.3.6] is prepared.

Initial budgets are created and bids submitted.

These activities are performed by the Nuclear Project Delivery (ND) in support of the organization that prepares the proposal.See Figure 2 for further details.FE]I i n v'e. n s'.> s" TM in V e. n s'. s" Triconex Operations Management Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 24 of 52 Date: 12/18/2012 ILI I i n v .e. n s>ýs, TM Operations Management inv'en ns'.u s" Triconex Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 25 of 52 Date: 12/18/2012 I

i-v e. n s'A.y S'TM in V e. n s-.*y s-Operations Management Triconex I Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 26 of 52 Date: 12/18/2012

2.3. Requirements

Phase During the Requirements Phase the high level functional design requirements are translated into verifiable, traceable technical requirements that define the software required to operate the system. These requirements will be used directly in the design, verification, and validation of the software, system or equipment.

The Requirements Phase inputs, outputs, and activities are illustrated in Figure 4.EL I inV v .e. n s>ý s.TM inve.n s s" Triconex Operations Management S Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 27 of 52 Date: 12/18/2012 zEJ I i n v e. n s'.y s, TM Operations Management in v e. n s'. s" Triconex Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 28 of 52 Date: 12/18/2012 iPI i n v e. n s*.ý s'TM in V'e.ns s-Triconex Operations Management Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 29 of 52 1 Date: 12/18/2012 j we 2.4. Design Phase This phase transforms the Software Requirements created in the Requirements Phase into detailed software design. The Software Architecture will also be defined and documented.

The Design Phase inputs, outputs, and activities are illustrated in Figure 5.EL I i n v e. n s" .s TM i n Ve.n s'.9 s" Triconex Operations Management Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 30 of 52 Date: 12/18/2012 I

n V'e. n s'.ý s-TM Operations Management inv'e. n s- s" Triconex Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 31 of 52 Date: 12/18/2012 i nve. n S*A.1 S'YM Operations Management i nv'e.n s'.Y s" Triconex Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 32 of 52 Date: 12/18/2012

2.5. Implementation

Phase During the Implementation Phase, the software described in the SDD is translated into an application that will run on the Triconex platform.

This application (PT2 file) is then turned over to Nuclear IV&V for verification testing.The Implementation Phase inputs, outputs, and activities are illustrated in Figure 6.IEI i n v'e. n s'.y s" TM Operations Management inve.n. s".4 s" Triconex Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 33 of 52 Date: 12/18/2012 I

n v'e. n s'.y s, TM Operations Management in V e. nls'.Y s" Triconex Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 34 of 52 Date: 12/18/2012 E-Z-I i fly e. ns'..js'TM in v'e.n s Triconex Operations Management Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 35 of 52 Date: 12/18/2012 2.6. Test Phase The purpose of the Test Phase is to demonstrate the software performs the intended function by performing validation of the software on the target or production hardware.

The Test Phase inputs, outputs, and activities are illustrated in Figure 7.wP I n v'e. n s'.y s" OM Operations Management i n V e.n s" Triconex Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 36 of 52 1 Date: 12/18/2012 E I n v'e. n s'.y s" TrM Operations Management in V e. n s". s" Triconex Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 37 of 52 Date: 12/18/2012

2.7. Delivery

Phase The Delivery Phase inputs, outputs, and activities are illustrated in Figure 8.The purpose of the Delivery Phase is to prepare the system for shipment to the customer.IEL I i n v'e. n s,. s" TM Operations Management i n V'e. n, s'.o s" Triconex Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 38 of 52 Date: 12/18/2012 IEL I i n v'e. n s'TM Operations Management i n V e. n s'. s" Triconex Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 39 of 52 Date: 12/18/2012

3. Methods, Tools and Techniques

3.1. Computing

systems to be used for software development Equipment and tools used by the Invensys Operations Management project team during the project lifecycle are listed below. Control of material (e.g., test equipment and safety-related V 10 Tricon hardware) and equipment calibration (e.g., for hardware validation and factory acceptance testing) will be handled in accordance with the applicable PPM.wP I i n v'e. n sn.

  • s" 0 TM i n V e. n. s'.j s" Operations Management Triconex Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 40 of 52 Date: 12/18/2012

3.2. Methods

3.2.1. Independent

Verification and Validation Independent Verification and Validation shall be performed on software design outputs from each phase of the development process. Software for this project is Nuclear Safety Related and will be classified Software Integrity Level 4 (SIL-4) in accordance with the procedures provided in the SVVP.3.2.2. Testing Software testing is a process of technical investigation intended to ensure that the specification, design, and implementation of the software product are fault-free.

Nuclear IV&V has primary responsibility for developing the test documents and conducting the testing. The functional responsibilities of Nuclear IV&V are defined in the PMP.3.2.3. Safety Analysis (Criticality/Hazard/Riskllnterface)

Safety Analysis (SA) shall be performed on software products as defined in the Software Safety Plan (SSP). The SA shall be performed by Nuclear IV&V in accordance with the SSP.El];-I i v v e. n s".Y s" TM Operations Management in V e. n s-Triconex Document:

1993754-1-906 Title: Software Developament Plan Revision:

2 Page: 41 of 52 Date: 12/18/2012

3.3. Tools

TS 1131 is the tool to be used for development of software for the PG&E DCPP PPS Replacement Project.Tools required for project execution, which include compilers, emulators, simulators, and hardware, shall be evaluated and documented as specified.

3.4. Development

methodsI i n v'e. n s'.i s'TM Operations Management inv'e.n s'.- s'Triconex Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 42 of 52 Date: 12/18/2012

3.5. Technical

standards to be followed See Section 4 for list of Standards.

3.6. Technical

Documentation Below is the list of the technical documents required for the development of the V10 Tricon Protection Set application code. The below list includes summary descriptions of the documents.

The documents are identified by title and document number based on the numbering scheme in Appendix A of the PMP. Authors, reviewers, and approvers are also shown.The PPS Replacement Project Software Verification and Validation Plan, 993754-1-802, provides additional details on the verification and validation activities performed by Nuclear IV&V. The Software Quality Assurance Plan, 993754-1-801, defines the quality affecting activities to be followed in the design, development, review, and testing for the PPS Replacement Project to ensure the specified quality requirements are met.

n V'e. n s'.y s" Operations Management i n Ve. n s'.Y s" Triconex Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 43 of 52 Date: 12/18/2012 w~I i n v'e. n s.9 y s" TM Operations Management in v e.n s" Triconex Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 44 of 52 Date: 12/18/2012 I

in ve. n s'.j s" IM Operations Management i n V e. n s-.Triconex Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 45 of 52 Date: 12/18/2012 I

i n ve. n s*.! s TM Operations Management in v'e.n s" Triconex Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 46 of 52 Date: 12/18/2012 wP I i n v e. n s>. s 0 TM i n V e. s" Triconex Operations Management Document:

993754-1-906 Title: Software Development PlanI Revision:

2 Page: 47 of 52 Date: 12/18/2012 E'L I i n v'e. n s'.ý= s" TM Operations Management in v'e. ns'- s" Triconex Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 48 of 52 Date: 12/18/2012 I

i n v'e. n s'.ý s, TM Operations Management in V e. n s'. s" Triconex Document:

1993754-1-906 1 Title: Software Development Plan Revision:

2 Page: 49 of 52 Date: 12/18/2012 F-L I i n v'e. n s s* ,"~ n %/ e. n s *.y s, Operations Management Triconex Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 50 of 52 Date: 12/18/2012

4. Standards The following documents are developmental references for this Plan: " Title 10 of the Code of Federal Regulation Part 50, Appendix B, Quality Assurance Criteria for Nuclear Power Plants and Fuel Reprocessing Plants" NUREG-0800, "Standard Review Plan (SRP) for the Review of Safety Analysis Reports for Nuclear Power Plants," Chapter 7, "Instrumentation and Controls," Revision 5* NUREG-0800, "Standard Review Plan (SRP) for the Review of Safety Analysis Reports for Nuclear Power Plants," Branch Technical Position (BTP) 7-14 Revision 5, Guidance on Software Reviews for Digital Computer-Based Instrumentation and Control Systems" NUREG/CR-6 101. "Software Reliability and Safety in Nuclear Reactor Protection Systems." 1993.* NUREG/CR-6463, Revision 1, "Review Guidelines for Software Languages for Use in Nuclear Power Plant Safety Systems," August 1997* RG 1.152, Revision 3, Criteria for Use of Computers in Safety Systems of Nuclear Power Plants" RG 1.153, Revision 1, Criteria for Safety Systems* RG 1. 168, Revision 1, Verification, Validation, Reviews, and Audits For Digital Computer Software Used in Safety Systems of Nuclear Power Plants* RG 1.169, Revision 0, Configuration Management Plans for Digital Computer Software Used in Safety Systems of Nuclear Power Plants" RG 1. 170, Revision 0, Software Test Documentation for Digital Computer Software Used in Safety Systems of Nuclear Power Plants* RG 1. 17 1, Revision 0, Software Unit Testing for Digital Computer Software Used in Safety Systems of Nuclear Power Plants" RG 1.172, Revision 0, Software Requirements Specifications for Digital Computer Software Used in Safety Systems of Nuclear Power Plants" RG 1.173, Revision 0, Developing Software Life Cycle Processes for Digital Computer Software Used in Safety Systems of Nuclear Power Plants* United States Nuclear Regulatory Commission (NRC) Digital Instrumentation and Controls Interim Staff Guidance 4, (DI&C ISG-04)" United States Nuclear Regulatory Commission (NRC) Digital Instrumentation and Controls Interim Staff Guidance 6 (DI&C-ISG-06)" Electric Power Research Institute (EPRI) TR-106439, "Guideline on Evaluation and Acceptance of Commercial Grade Digital Equipment for Nuclear Safety Applications," October 1996 I in V e. n s " s o TM i .V" e. n. s" .!i " Operations Management Triconex Document:

993754-1-906 Title: Software Development Plan Revision:

2 Page: 51 of 52 Date: 12/18/2012

  • IEEE 7-43.2-2003, IEEE Standard Criteria for Digital Computers in Safety Systems of Nuclear Power Generating Stations" IEEE 603-1991 including correction sheet dated January 30, 1995, IEEE Standard Criteria for Safety Systems for Nuclear Power Generating Stations* IEEE 610.12-1990, IEEE Standard Glossary of Software Engineering Terminology
  • IEEE 10 16-1998, IEEE Recommended Practice for Software Design Descriptions
  • IEEE 12207-1996, IEEE/Electronic Industries Alliance (EIA) Standard for Software Life Cycle Processes" Purchase Order Compliance Matrix, 993754-1-800
  • Technical Requirements List, 993754-1-808" Project Management Plan, 993754-1-905
  • Software Development Plan, 993754-1-906" Project Risk Management Plan, 993754-1-908
  • Project Quality Plan, 993754-1-900
  • Software Quality Assurance Plan, 993754-1-801
  • Software Configuration Management Plan, 993754-1-909" Software Integration Plan, 993754-1-910" Hardware Requirements Specification, 993754-lnl-807
  • Software Requirements Specification, 993754-lnl-809
  • System Architecture Description, 993754-1-914
  • Software Design Description, 993754-1-810
  • Software Verification and Validation Plan, 993754-1-802
  • Software Safety Plan, 993754-1-911" Validation Test Plan, 993754-1-813 i n v'e. n s'.n s" TM i n ve. n s".w s" Operations Management Triconex Document:

1993754-1-906 1 Title: Software Development Plan Revision:

2 Page: 52 of 52 Date: 12/18/2012" Software Verification Test Plan, 993754-1-868

  • Hardware Validation Test Procedure, 993754-lnl-902-0" Factory Acceptance Test Procedure, 993754-in'-902-1" Input/Output List, 993754-1-806
  • V10 Tricon Protection Set Application Code, 993754-in'-700
  • Failure Modes and Effects Analysis, 993754-1-811
  • Master Configuration List, 993754-1-803
  • Project Traceability Matrix, 993754-1-804" Triconex Project Procedures Manual I
Retrieved from "https://kanterella.com/w/index.php?title=ML13093A317&oldid=1362069"