L-07-024, Emergency Response Data System

From kanterella
Revision as of 14:50, 10 February 2019 by StriderTol (talk | contribs) (Created page by program invented by StriderTol)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Emergency Response Data System
ML070440145
Person / Time
Site: Beaver Valley
Issue date: 02/08/2007
From: Lash J H
FirstEnergy Nuclear Operating Co
To:
Document Control Desk, Office of Nuclear Security and Incident Response
References
L-07-024
Download: ML070440145 (2)


Text

FENOC FirstEnergy Nuclear Operating Company James H. Lash 724-682-5234 Site Vice President Fax: 724-643-8069 February 8, 2007 L-07-024 ATTN: Document Control Desk U. S. Nuclear Regulatory Commission Washington, DC 20555-0001

Subject:

Beaver Valley Power Station, Unit No. 2 Docket No. 50-412, License No. NPF-73 Emergency Response Data System In accordance with 10 CFR 50, Appendix E, Section VI, changes to the Beaver Valley Power Station Unit No. 2 Data Point Library for the Emergency Response Data System (ERDS) are provided in the Attachment.

Data Point identification number T1014A and corresponding NRC ERDS Parameter EXTRA14 were revised to reflect containment temperature detector alarm setpoint changes.No new regulatory commitments are contained in this submittal.

If there are any questions or if additional information is required, please contact Mr. Henry L. Hegrat, Supervisor

-FENOC Fleet Licensing, at (330) 315-6944.Sincerely, ames H. Lash

Attachment:

ERDS Data Point Library Page, NRC ERDS Parameter EXTRA 14 c: Ms. N. S. Morgan, NRR Project Manager (w/o enclosure)

Mr. P. C. Cataldo, NRC Senior Resident Inspector Mr. S. J. Collins, NRC Region I Administrator Mr. D. A. Allard, Director BRP/DEP Mr. L. E. Ryan (BRP/DEP)

L-07-024 Attachment BEAVER VALLEY POWER STATION Page I of I ERDS DATA POINT LIBRARY Date: Reactor Unit Data Feeder NRC ERDS Parameter Point ID: Plant Spec Point Desc.: GeneridCond Desc.: Analog/Digital:

Engr Units/Dig States: Engr Units Conversin M/inimum instr Range: Maximum Instr Range: Zero Point

Reference:

Reference Point Notes: PROC or SENS: Number of Sensors: How Processed:

Sensor Location: Alarm/Thp Set Points: NI Detector Power Supply Cut-Off Power Level: NI Detector Power Supply Turn-ON Power Level: Instrument Failure Mode: Temperature Compensation for DP Transmitters:

Level Reference Leg: Unique System Desc.1/25/2007 BV2 PCs EXTRA14 T1014A RX CNMT TEMP LMS-TE100-14 CONTAINMENT TEMPERATURE A DEGF LINEAR 0 300 N/A N/A S 1 N/A SEE UNIQUE SYSTEM DESCRIPTION FIELD HIl ALM @ 93.8 DEGF; LO ALM @ 74.9 DEGF N/A N/A HIGH N N/A 2LMS-TE100-4 measures Containment temperature outside the Crane Wall-See attached drawing for detector Iocations in Containment 2LMS-TE100-14 senses temperature in Containment at 701' 6" elevation outside the Crane Wall- Ref.10080-TLD-12B-019, RK-14A.