ENS 46200: Difference between revisions
Jump to navigation
Jump to search
StriderTol (talk | contribs) (Created page by program invented by Mark Hawes) |
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
||
| Line 16: | Line 16: | ||
| event date = 08/20/2010 CDT | | event date = 08/20/2010 CDT | ||
| last update date = 08/23/2010 | | last update date = 08/23/2010 | ||
| title = Agreement State Report - Troxler Moisture Density Gauge Model 3411B Damaged | | title = Agreement State Report - Troxler Moisture Density Gauge Model 3411B Damaged at Construction Site | ||
| event text = The following was received from the State of Iowa via e-mail: | | event text = The following was received from the State of Iowa via e-mail: | ||
The licensee reported [to the IDPH (Iowa Department of Public Health)] on Saturday, August 21, 2010 of an event that occurred the previous day. A Troxler, model 3411B moisture/density gauge was run over at a temporary job site in Camanche, Iowa by a large dump truck. The construction vehicle was backing up and the driver did not see the gauge or the gauge user. The licensee's RSO reported the following to IDPH on August 23, 2010. The source rod was severed from the handle at the upper weld. The index rod was bent, and two of the faceplate screws were bent. The source rod was lifted up by hand and brought back into the gauge (safe position, with the exception that the source rod could pull completely out the top of the gauge). The bottom shutter closed as usual. No physical damage to the source rod was evident on the bottom half of the source rod. A leak test was completed on the gauge and the swabs were overnighted to Qal-Tek Associates (3998 Commerce Cr. Idaho Falls, | The licensee reported [to the IDPH (Iowa Department of Public Health)] on Saturday, August 21, 2010 of an event that occurred the previous day. A Troxler, model 3411B moisture/density gauge was run over at a temporary job site in Camanche, Iowa by a large dump truck. The construction vehicle was backing up and the driver did not see the gauge or the gauge user. The licensee's RSO reported the following to IDPH on August 23, 2010. The source rod was severed from the handle at the upper weld. The index rod was bent, and two of the faceplate screws were bent. The source rod was lifted up by hand and brought back into the gauge (safe position, with the exception that the source rod could pull completely out the top of the gauge). The bottom shutter closed as usual. No physical damage to the source rod was evident on the bottom half of the source rod. A leak test was completed on the gauge and the swabs were overnighted to Qal-Tek Associates (3998 Commerce Cr. Idaho Falls, | ||
Revision as of 22:08, 1 March 2018
| Where | |
|---|---|
| Shive-Hattery Inc Camanche, Iowa (NRC Region 3) | |
| License number: | 0174152Pg |
| Organization: | Iowa Department Of Public Health |
| Reporting | |
| Agreement State | |
| Time - Person (Reporting Time:+83.35 h3.473 days <br />0.496 weeks <br />0.114 months <br />) | |
| Opened: | Randal Dahlin 16:21 Aug 23, 2010 |
| NRC Officer: | Joe O'Hara |
| Last Updated: | Aug 23, 2010 |
| 46200 - NRC Website | |