ML072610068: Difference between revisions
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
||
Line 2: | Line 2: | ||
| number = ML072610068 | | number = ML072610068 | ||
| issue date = 09/14/2007 | | issue date = 09/14/2007 | ||
| title = | | title = Amergen Energy Company, LLC, Surrebuttal Statement of Position, with Pre-Filed Surrebuttal Testimony, Parts 1 - 6, and Pre-Filed Surrebuttal Testimony Exhibits 37 - 61 | ||
| author name = Silverman D | | author name = Silverman D | ||
| author affiliation = AmerGen Energy Co, LLC, Exelon Corp, Morgan, Lewis & Bockius, LLP | | author affiliation = AmerGen Energy Co, LLC, Exelon Corp, Morgan, Lewis & Bockius, LLP | ||
Line 4,007: | Line 4,007: | ||
,July 9, 1987 NRC BULLETIN NO. 87-01: THINNING OF PIPE WALLS IN NUCLEAR POWER PLANTS Addressees: | ,July 9, 1987 NRC BULLETIN NO. 87-01: THINNING OF PIPE WALLS IN NUCLEAR POWER PLANTS Addressees: | ||
All licensees for nuclear power plants holding an operating license or a construction permit. | All licensees for nuclear power plants holding an operating license or a construction permit. | ||
Purpose: | |||
==Purpose:== | |||
The purpose of this bulletin is to request that licensees submit information concerning their programs for monitoring the thickness of pipe walls in high-energy single-phase and two-phase carbon steel piping systems. | The purpose of this bulletin is to request that licensees submit information concerning their programs for monitoring the thickness of pipe walls in high-energy single-phase and two-phase carbon steel piping systems. | ||
Description of Circumstances: | Description of Circumstances: |
Revision as of 11:21, 7 December 2019
ML072610068 | |
Person / Time | |
---|---|
Site: | Oyster Creek |
Issue date: | 09/14/2007 |
From: | Silverman D AmerGen Energy Co, Exelon Corp, Morgan, Morgan, Lewis & Bockius, LLP |
To: | Abramson P, Anthony Baratta, Hawkens E Atomic Safety and Licensing Board Panel |
SECY RAS | |
References | |
50-219-LR, ASLBP 06-844-01-LR, RAS 14125 | |
Download: ML072610068 (540) | |
Text
{{#Wiki_filter:S/5 //~ DOCKETED USNRC UNITED STATES OF AMERICA September 17, 2007 (7:45am) NUCLEAR REGULATORY COMMISSION OFFICE OF SECRETARY RULEMAKINGS AND ATOMIC SAFETY AND LICENSING BOARD ADJUDICATIONS STAFF Before Administrative Judges: E. Roy Hawkens, Chair Dr. Paul B. Abramson Dr. Anthony J. Baratta In the Matter of: ) September 14, 2007
- )
AmerGen Energy Company, LLC )
) Docket No. 50-219 (License Renewal for Oyster Creek Nuclear )
Generating Station) )
)
AMERGEN ENERGY COMPANY, LLC SURREBUTTAL STATEMENT OF POSITION I. INTRODUCTION In accordance with 10 C.F.R. § 2.1207(a)(1) and the Atomic Safety and Licensing Board's ("Board") April 17, 2007, and August 9, 2007 Memoranda and Orders,- AmerGen Energy Company, LLC ("AmerGen") hereby submits its SurRebuttal Statement of Position ("SurRebuttal") in response to Citizens' Rebuttal.- AmerGen's SurRebuttal is supported by the attached six-part testimony and Exhibits 37 through 61. Citizens once again rely solely upon Dr. Hausler to support their case. His testimony consists of two new memoranda (Exhibits 38 and 39) and answers to 24 questions. The vast majority of the information provided by Dr. Hausler repeats arguments from Citizens' Direct Testimony submittal of July 20, 2007. AmerGen is not providing new testimony from its experts to respond to those recycled arguments. However, AmerGen is providing testimony to respond (Prehearing Conference Call Summary, Case Management Directives, and Final Scheduling Order) (April 17, 2007) (unpublished); (Ruling on Motions in Limine and Motion for .Clarification) (August 9, 2007) (unpublished).
"Citizens' Rebuttal Regarding Relicensing of Oyster Creek Nuclear Generating Station, Rebuttal Statement, Exhibits (August 17, 2006); "Prefiled Rebuttal Written Testimony of Dr. Rudolf H. Hausler Regarding Citizens' Drywell Contention" (August 16, 2007).
1-WA/2816034 FCMI/7l-lp =ý_n-:e-/.93-50
to those few allegations that Dr. Hausler raises or clarifies for the first time on Rebuttal. As summarized below, and as demonstrated in the attached testimony, Citizens' arguments continue to deserve little consideration and should be given little if any weight. By negating Citizens' arguments, this SurRebuttal continues to demonstrate that Citizens' contention is without merit, and that AmerGen's Aging Management Program ("AMP") for the sand bed region of the Oyster Creek Nuclear Generating Station ("OCNGS") drywell shell provides reasonable assurance that the drywell shell will continue to perform its intended finctions throughout the period of extended operation in accordance with the current licensing basis ("CLB") as required by 10 C.F.R. § 54.29(a). II.
SUMMARY
OF AMERGEN'S SURREBUTTAL TESTIMONY The parties' testimony is serving its purpose of narrowing and clarifying the issues that remain to be resolved at the hearing, as discussed in the following discussion of acceptance criteria, available margin, sources of water, epoxy coating system, and future corrosion. A. Acceptance Criteria The testimony submitted to date shows that there is no dispute regarding the general buckling criterion (i.e., uniform thickness of 0.736") or the pressure criterion (i.e., 0.490" over an area that is 2.5" in diameter). The only dispute is over the local buckling criterion. AmerGen has established, through the GE analyses performed in the early 1990s, a local buckling criterion consisting of the "tray" configuration shown in Applicants' Exhibit 11, 3 "tak[ing] into account factors such as the location of the tray within the bay and configuration.'" The center square foot of the .tray is 0.536", with a transition back to 0.736" on all sides. As is clearly reflected in Part 2 of the attached SurRebuttal Testimony and referenced exhibits, this local buckling criterion is part of the OCNGS CLB. The NRC Staff concurs that _ AmerGen Dir., Part 2, A. 14. I-WA/2816034 2
this criterion is part of the CLB,- and that its review of AmerGen's License Renewal Application included "a very local criterion of 0.536 inch [as] discussed at SER pages 4-55 to 4-60."5 As the federal regulator, the Staff's opinion should govern over the opinion of an anti-nuclear group.6 What appears to be the cause of Citizens' confusion is that instead of using this local buckling criterion, AmerGen has evaluated UT thickness data with more conservative, calculation-specific values such as 0.693" over a 6" x 6" area, etc.- This is akin to using an administrative limit, which does not alter the CLB.8 In their Rebuttal, Citizens do not accept Applicants' Exhibit 11 as the CLB local buckling criterion.9 They attack the derivationof that criterion,L0 indirectly argue that it does not meet the ASME Code,11 and because they cannot find a document to support that the criterion is part of the CLB,L2 they argue that it is not.-3 Citizens then suggest that the more conservative calculation-specific values that AmerGen has used in the various revisions to the 24 Calc (e.g., 0.636" over a 12" x 12" area) ought to govern. 1 4 They have even asked the Board to set these more conservative values as the OCNGS CLB, something the Board does not have the authority See e.g. NRC Staff Response To AmerGen's Motion For Summary Disposition, Affidavit of Hansraj G. Ashar,
¶ 3 (Apr. 26, 2007) ("it is my opinion that AmerGen has developed three criteria related to acceptance of the shell thicknesses; ... (2) a minimum locally thin thickness of 0.536 inch, in an area of one square foot, with a surrounding one foot transition.area to 0.736 inch"); see also NRC Staff's Direct Testimony, A.9.
_ NRC Staff's Direct Testimony, A.9. _ Since the start of this proceeding, Citizens have made their real intentions known by renaming themselves as "Stop the Relicensing of Oyster Creek" (STROC). See e.g. http://www.nirs.org/press/09-26-2006/l (visited August 30, 2007). 2 AmerGen Dir., Part 2, A. 19. S id., A.20. By analogy, the OCNGS Technical Specifications may' require the drywell atmosphere during operation to contain less than 4% oxygen, but the plant may have a lower administrative limit of 2%. A 2% administrative limit would not alter the fact that 4% is the CLB. 2 Citizens' Rebuttal Statement at 8. Lo See e.g., id. at 5-9. L' See e.g., Dr. Hausler Rebuttal Testimony, A.6. L2 Citizens' Rebuttal Statement at 8. _U Id. L4 Citizens' "Motion to Cross-Examine Mr. Tamburro," for example, is based on their insistence that 0.636" should be the appropriate local buckling criterion. I-WA/2816034 3
5 to do.1 AmerGen believes that the Board has prohibited Citizens from challenging the local buckling criterion (as well as the other established acceptance criteria) with the narrow exception that Citizens may present an argument that the "application of acceptance criteria and analytic methodology to the 2006 UT results was inconsistent with past practice.'"I6 Thus, at the hearing, the Board should address any of Citizens' arguments that the "application of acceptance criteria
... to the 2006 UT results was inconsistent with past practice" and then proceed to the evaluation of bounding available margin using the OCNGS CLB acceptance criteria.
B. Available Margin Here too the issues have been clarified and narrowed. It is undisputed that buckling, due to the weight of the water and equipment on the drywell shell during an earthquake that only occurs during refueling outage conditions, is the bounding scenario for failure of the drywell shell 'in the sand bed region.-7 AmerGen's position is that the bounding available margin for buckling at the start of the extended period of operations is 0.064".18 This is based on the thinnest average of the 49 UT thickness measurements from internal grid 19A, which in 1992. was 0.800", compared to the general buckling criterion of 0.736" (0.800"-0.736" = 0.064").L9 What first remains in dispute is whether the internal UT data represent the bounding
-L This criterion is part of the CLB, and that is not within the scope of the Board's jurisdiction in this license renewal proceeding. See FloridaPower & Light Co. (Turkey Point Nuclear Generating Plant, Units 3 & 4),
CLI701-17, 54 N.R.C. 3, 8-9 (2001) ("the Commission did not believe it necessary or appropriate to throw open the full gamut of provisions in a plant's [CLB] to re-analysis during the license renewal review"). _6 Memorandum and Order (Denying AmerGen's Motion for Summary Disposition) at 8 (June 19, 2007) (unpublished). L1 Failure of the drywell shell in the sand bed region due to internal pressure is not the bounding scenario. AmerGen Dir., Part 2, A. 12. Dr. Hausler seems to not recognize this. See e.g. Citizens' Exh. 38 at 6 ('."structures do not fail by averages .... [they] fail where the deepest pit is located"). ýL AmerGen Dir., Part 3, A.5. 19
- AmerGen Reb., Part 3, A.26. The fact that external corrosion has been arrested is demonstrated by the averages from grid 19A that have varied little over time: 0.800" (1992), 0.806" (1994), 0.815" (1996) and 0.807" (2006). Id. at A.26.
I-WA/2816034 4
conditions, Citizens argue they do not,2° but do so by ignoring data that would disprove their case.21 Part 3 of AmerGen's SurRebuttal Testimony supplements the record on this issue. What also remains in dispute is the level of "confidence" in the internal data required by the ASME Code. AmerGen uses the average of these UT grid data (i.e., the "sample average"). It does so because the sample average is what is important from a buckling perspective, not the extreme values.-2 Moreover, the nuclear industry standard is to use the average.-D Citizens argue that the level of confidence must be 95%. It is not clear what Citizens mean by 95%, as they define it in two, significantly different ways in their Rebuttal.24 Dr. Hausler admits that 95% (whatever its definition) is not the industry standard; rather he believes that it ought to be.2_5 Citizens provide no evidence that applicable nuclear industry Codes, guidance, or regulations require something other than the average. The amount of uncertainty (ie, systematic error) that should be taken into account is also in dispute. AmerGen does not subtract anything from the averages of the internal UT grid data to take into account systematic error because "[it] is negligible for sufficiently large numbers of measurements collected over time... [T]he more measurements you have ... and the more 26 times you collect those measurements, the less significant systematic error becomes." Citizens want to subtract 0.0 10" from the average of the internal UT data to account for Lo Citizens' Exhibit 12, at 3-4 (ignoring Bay 17 grid data); Citizens' Rebuttal, Exh. 39, at 14-15 (ignoring Bay 13 (Figures 1 and 2) and Bay I data (Figures 3 and 4)). Ll See AmerGen SurReb., Part 3, A.5; AmerGen Reb., Part 3, A.25-29, A.32-33. L' AmerGen Reb., Part, A.2 ("[B]uckling is not a phenomenon that is dependent on very local thickness, but instead on the average thickness over a larger area. Thus, the averages of these data, not the thinnest extremes, are representative of each grid."). L' Id. at A.54 (discussing average readings used for evaluating Degraded Piping, Erosion-Corrosion (FAC) Prone Piping, Pressure Vessel Shells, and Tanks). L4 AmerGen SurReb., Part 3, A.3-4. 2L See e.g. Citizens' Exh. 38, at 8 ("there are currently no standards with respect to the certainty required"). L6 AmerGen Reb., Part 3, A.7. I-WAi2816034 5
systematic error.2-7 They appear to ignore, among other things, the factthat instrument uncertainty is not in one direction, but is +/-. Therefore, averaging the data over 49 measurements makes the instrument uncertainty of +/- 0.010" insignificant.2s As for the external UT data, these were last collected in.2006 as single points from 106, mostly small (2" diameter) areas, most of which had been ground smooth to allow UT readings from the otherwise uneven, historically corroded exterior.L9 These points are biased thin compared to the rest of the drywell shell in the sand bed region as demonstrated by comparison to the internal UT grids3° and by Dr. Hausler's own analysis.31 Any points that are thinner than 0.736" are compared to the local buckling criterion. Because this criterion is. volumetric, it "is not exceeded when localized corrosion removes a couple or even tens of cubic inches from the tray. The entire tray, on average, needs to corrode away for that loss of metal to be significant from a buckling perspective. . ."L2 Also, the external single-point UT measurements "can tell you that you meet the applicable ASME Code, but not by how much. This is the case because there are an insufficient number of UT measurements over large areas to evaluate a representative average thickness over each area.'-3 34 Citizens evaluate these 106 external points using extreme value statistics.- There is no precedent for this other than Dr. Hausler's desire for it.35 Again, the nuclear industry standard is 27 Citizens' Rebuttal Statement at 12 ("Subtracting an allowance of 0.01 inches for systematic error.. 28s AmerGen Reb., Part 3, A.6-7. 29 AmerGen Dir., Part 3, A.20 and A.41. 30 AmerGen Reb., Part, A.42.
*' Citizens' Exh. 12, at 4 (Dr. Hausler states that "the average outside measurements are significantly lower at comparable elevations [than the interior measurements]. This is probably because the choice of location for the external measurements was deliberately biased towards thin spots.").
32 AmerGen Dir., Part 2, A. 15. L3 AmerGen Reb., Part 3, A.38. L4 See generally, Citizens' Exh. 38 at 6-9. L5 Id. at 8. I-WA/2816034 6
to use the average of the data from UT grids, not extreme value statistics on single points.3-6 Thus, the Board need only confirm that AmerGen's use of the average of the internal UT grid data, with no corrections for systematic error, is appropriate under the ASME Code. The Board need not delve into Dr. Hausler's computer modeling or other treatment of the UT data. C. Sources Of Water The sources and timing of water potentially coming into contact with the external surface of the drywell shell in the sand bed region during the period of extended operation have also been clarified and narrowed for both outages and normal operation. During outages, water can only come into contact with the external surface if: (a) the use of chillers inside the drywell cools the shell below the dew point temperature of the exterior air (causing condensation), or (b) the reactor cavity contains water and leakage exceeds the trough drain capacity, or the trough drain is blocked, and the water flows down to the sand bed region. Condensation, while theoretically possible, was not observed during the most recent refueling outage. So, as explained below, condensation remains speculative. AmerGen's inspection of the trough drainL7 and sand bed drains18 during each outage when the reactor cavity is filled would identify any water. Although the chance of water on the exterior drywell shell during such outages is low,39 the Board could assume the presence of such water in order to 40 streamline its inquiry at the hearing. L Citizens also challenge the "Evaluation Thickness" mentioned in all of the revisions of the 24 Calc. (AmerGen's Exhibits 16 through 18). See e.g. Citizens' Exh. 13, at 6-7. AmerGen addressed Citizens' misunderstanding on this issue in its Rebuttal Testimony, Part 3, A.50 through A. 52 which Citizens could not have reviewed before they filed new testimony. Citizens' Exh. 39, at 15-16 (Dr. Hausler's rebuttal). L Applicants' Exh. 10, at 9 (Item #13). L AmerGen Reb., Part 4, A. 19. Refueling outages occur every other year for up to 30 days. Forced outages when the reactor cavity must be filled with water are rare. AmerGen Dir., Part 1, A. 17. L See AmerGen Dir., Part 6, Q&A. 14, which assumes, as a conservative analysis, that water-regardless of its source-is on the exterior surface of an uncoated drywell shell for 30 days, every other year. I -WA/2816034 7
The Board should conclude, however, that there is no water on the exterior drywell shell during normal plant operation. Condensation is physically impossible because the metal, shell is hotter than the ambient air.41 And there is no other known source of water other than the reactor cavity during outages. Citizens provide only speculation that other sources exist. AmerGen supplements the record on this issue in Part 4 of its SurRebuttal testimony. D. Epoxy Coating System Of all the issues, this one has been clarified the most. AmerGen has provided testimony, by an eminently-qualified expert,42 that the multilayered epoxy coating was properly applied, is in good condition, and can serve its protective function through the period of extended operation. When the coating does begin to degrade, it will do so gradually, showing initial signs of degradation over a period of years. Moreover, these signs will be obvious to an ASME-qualified inspector. ASME Section XI, Subsection IWE, which is mandated by 10 C.F.R. § 50.55a, "recognizes that containments are coated and requires a visual inspection of the coating to identify ongoing corrosion of the containment vessel under the coating. NRC has endorsed these practices in the GALL Report (NUREG-1801, Vol. 2, Appendix xi.S8)."43 Citizens' proffered expert, whose has little or no experience with epoxy coating systems like the one covering the exterior drywell shell, has suggested that the coating could fail any at any time, would do so quickly, and that such failure would not be visible to an ASME-qualified inspector. This flies in the face of NRC regulations and guidance, and is based on an inappropriate analogy to "oil field experience" of "pressure drops," high temperatures, and 41 AmerGen Dir., Part 4, A. 17. 42 Mr. Jon Cavallo is, among other things, Chairman of the ASTM Committee D-33 (Protective Coating and Lining Work for Power Generation Facilities) and Chairman of the New England Chapter of the Society for Protective Coatings. See AmerGen Dir., Part 5, A.3. 43 AmerGen Reb., Part 5, A.6 I-WA/2816034 8
44 diffusion of corrosive gasses.4 AmerGen's SurRebuttal in Part 5 supplements the record on these issues. E. Future Corrosion This aspect of Citizens' case, in reality, remains the most speculative. In order to evaluate future corrosion of the exterior surface of the drywell shell in the sound bed region, one must first assume degradation of the epoxy coating system over a large enough area to implicate buckling,4L and you need water in contact with that same large area for a significant period of time, without the water being detected.f6 Accordingly, AmerGen believes that future corrosion of a magnitude sufficient to remove 0.064" of metal from the entire shell, or in the precise grid location (grid 19A) where 0.064" remains, in the period between AmerGen's planned UT inspections, is entirely speculative. The conditions that supported high rates of corrosion no longer exist. AmerGen offered worst case and unrealistic corrosion rates of 0.039" and 0.017" for refueling outages to demonstrate that UT inspections, every four years are adequate. Similarly, Citizens have offered no corrosion rate that is realistic or expected for the external surface of the drywell in the sand bed region.f7 They argue that any future corrosion would occur at an exponential rate, but they do so with no legitimate support.-8 As for the interior surface, it is either coated (above the concrete curb) or embedded in concrete (below the curb). Citizens have only challenged the embedded portion. Citizens first alleged that 0.002" was an appropriate annual corrosion rate for this surface, 44 Citizens' Exh. 39, at 17-18. L5 Localized coating degradation would implicate the pressure criterion (0.490") for which significantly more than 0.064" of margin remains at any UT location. AmerGen Dir., Part 3, A.32. L6 Even Dr. Hausler agrees that you need the confluence of "aerated aggressive water[,j ... the coating has to have failed in some manner at the location where water is present [and] . . the corrosion has to occur at a location where the drywell has already been damaged." Citizens' Exh. 39, at 20. See e.g., Citizens' Rebuttal Statement at 23-24. 48 See AmerGen Reb., Part 6, A.5 through A.8 (confirming that Dr. Hausler iý confusing "pitting"corrosion with "general" corrosion, and oil field conditions with exterior benign sand bed region conditions). 1-WA/2816034 9.
but in rebuttal state that it is as high as 0.010". Yet basic corrosion science,49 and the observations of those engineers who looked at a recently exposed portion of the interior shell, demonstrate that only insignificant corrosion has occurred on this internal surface.-° The water in contact with the interior shell is non-corrosive and is expected to remain so during the period of extended operation L Accordingly, the corrosion determined to have occurred between the UT readings taken in 1986 and 2006 must have resulted from historic corrosion of the exterior between 1986 and 1992. Part 6 of AmerGen's SurRebuttal Testimony supplements the record on this issue. Respect ly sub iitted, Donald J. Silverman, f<q. Kathryn M. Sutton, Esq. Alex S. Polonsky, Esq. MORGAN, LEWIS & BOCKIUS, LLP 1111 Pennsylvania Avenue, N.W. Washington, DC 20004 Phone: (202) 739-5502 E-mail: dsilvermnangmorganlewis.com E-mail: ksuttongmorganlewis.com E-mail: apolonsky(,morganlewis.com J. Bradley Fewell Associate General Counsel Exelon Corporation.* 4300 Warrenville Road Warrenville, IL 60555 Phone: (630) 657-3769 E-mail: Bradley.Fewell 2cexeloncorp.com Dated in Washington, D.C. COUNSEL FOR this 14th day of September 2007 AMERGEN ENERGY COMPANY, LLC 49 Id. at A.10. 50 Id. at A. 13. 5__1 Id. at A. 10 ("Water samples collected from the inside of the drywell shell during the 2006 outage were measured to have a pH of approximately 8.4 to 10.2 and low levels of chloride and sulfate, which is consistent with NRC [GALL] Report (Vol. 2, Rev. 1, at 11 A. I through 5) and EPRI embedded steel guidelines for an environment that poses no aging management concerns."). I-WA/2816034 10
UNITED STATES OF AMERICA NUCLEAR REGULATORY COMMISSION ATOMIC SAFETY AND LICENSING BOARD Before Administrative Judges: E. Roy Hawkens, Chair Dr. Paul B. Abramson Dr. Anthony J. Baratta
)
In the Matter of:. September 14, 2007
)
AmerGen Energy Company, LLC )
) Docket No. 50-219 (License Renewal for Oyster Creek Nuclear )
Generating Station)
)
AMERGEN'S PRE-FILED SURREBUTTAL TESTIMONY PART 1 INTRODUCTION, DRYWELL PHYSICAL STRUCTURE, HISTORY, AND COMMITMENTS I. WITNESS BACKGROUND Q. 1: Please state your names and current titles. The Board knows that a description of your current responsibilities, background and professional experience was provided in Part I of AmerGen's Pre-Filed Direct Testimony on July 20, 2007, so there is no need for you to repeat that information here. A. 1: (JFO) My name is John F. O'Rourke. I am a Senior Project Manager, License Renewal, for Exelon, AmerGen Energy Company, LLC's ("AmerGen") parent company. 1 -WA/2819537 (Part I SurRebuttal)
(FWP) My name is Frederick W. Polaski. I am the Manager of License Renewal for Exelon. (MPG) My name is Michael P. Gallagher, and I am the Vice President for License Renewal for Exelon. Q. 2: Would you please summarize the purpose of this SurRebuttal Testimony? A. 2: (All) The purpose of this SurRebuttal Testimony is to respond to the information provided in Citizens' Rebuttal Statement Regarding Relicensing of Oyster Creek Nuclear Generating Station ("Citizens' Rebuttal Statement") and in the Pre-Filed Rebuttal Testimony of Dr. Rudolf H. Hausler, regarding the drywell physical structure and AmerGen's regulatory commitments. II. DRYWELL PHYSICAL STRUCTURE Q. 3: Dr. Hausler alleges that "the exterior of the sandbed region.., has very limited air exchange." (Citizens' Rebuttal Testimony, A.22). Citizens use this allegation to question Ed Hosterman's evaporation calculation in AmerGen's Direct Testimony, Part 6, A. 19. Is Dr. Hausler correct? A. 3: (All) No. Applicant's Exhibits 4 and 7 show that the drywell vents penetrate the concrete at the top of the sand bed region. The clearance between the concrete and the vents is greater than 3". There are 10 vents. Since the vent lines are approximately 4 feet in diameter, the gap between the vent and the concrete provides approximately 5.3 square feet for air flow in each bay. Additionally, many piping penetrations from the drywell have similar openings. Thus, there is substantial area for air flow through the sand bed region. In Part 6, Ed Hosterman will explain why air flow is expected through the sand bed region. I-WA/2819537 (Part I SurRebuual) 2 of 5
III. REGULATORY COMMITMENTS Q. 4: Citizens allege that "[t]he plant could be forced into an outage that requires the fuel cavity to be flooded before there is any chance to apply measures to mitigate leaks in the cavity liner" (Citizens' Rebuttal Statement, page 19; Hausler Rebuttal. Testimony, A.23). How do you respond? A. 4: (All) To clarify Part 1 of AmerGen's Direct Testimony, we did not state, nor did we imply, that strippable coating and metal tape would not be applied during a forced outage in which the reactor cavity is filled with water. We merely stated that, "[tlhe reactor cavity may be required to be filled with water during a forced outage when the reactor vessel must be opened. Such outages are rare." AmerGen Dir. Part 1 A. 17. (MPG) My testimony summarized AmerGen's commitments to perform future actions related to drywell shell sand bed region corrosion control, including the commitment that "[a] strippable coating will be applied to the reactor cavity liner to prevent water intrusion between the drywell shield wall and the drywell shell during periods when the reactorcavity is flooded." (emphasis added.) Citizens then appear to have assumed that this commitment did not apply to forced outages, but Citizens are wrong. The commitment does extend to any non-refueling outage that would require the reactor cavity to be filled with water. The reason that the implementation schedule refers only to "refueling outages" is that we do not anticipate such an outage in the future.. .1-WA/2819537 (Part I SurRebuttal) 3 of 5
Q.5: Does this conclude your testimony? A. 5: (All) Yes. I-WA/2819537 (Part I SurRebuttal) 4 of.5
In accordance with 28 U.S.C. § 1746, 1 state under penalty of perjury that the foregoing is true and correct:
-atz-e 7 Jo*)? O'Rourke Date Frederick W. Polaski Date Michael P. Gallagher Date 1-WA/2819537 (Part I SurRebuttal) ' 5 of 5
UNITED STATES OF AMERICA NUCLEAR REGULATORY COMMISSION ATOMIC SAFETY AND LICENSING BOARD Before Administrative Judges: E. Roy Hawkens, Chair Dr. Paul B. Abramson Dr. Anthony J. Baratta
)
In the Matter of: ) September 14, 2007
)
AmerGen Energy Company, LLC )
) Docket No. 50-219 (License Renewal for Oyster Creek Nuclear )
Generating Station) )
) )
AMERGEN'S PRE-FILED SURREBUTTAL TESTIMONY PART 2 ACCEPTANCE CRITERIA I. WITNESS BACKGROUND Q. 1: Please state your names and current titles. The Board knows that a description of your current responsibilities, background .and professional experience was provided in Parts I and 2 of AmerGen's Pre-Filed Direct Testimony on July 20, 2007, and in Part 2 of AmerGen's Pre-Filed Rebuttal Testimony on August 17, 2007, so there is no need for you to repeat that information here. A. 1: (MPG) My name is Michael P. Gallagher, and I am Vice President of License Renewal for Exelon. I-WA/2820761 (Part 2 SurRebuttal)
(PT) My name is Peter Tamburro, and I am a Senior Mechanical Engineer in the Engineering Department at the Oyster Creek Nuclear Generating Station ("OCNGS"). (AO) My name is Ahmed Ouaou, and I am a registered Professional Engineer specializing in civil structural design. I am an independent contractor. Q. 2: Would you please summarize the purpose of your testimony? A. 2: (All) The purpose of our testimony is to address the Atomic. Safety and Licensing Board's ("Board") questions asked during the September 5, 2007 pre-hearing conference call regarding the established drywell shell thickness acceptance criteria for the sand bed region. II. RESPONSE TO BOARD QUESTIONS Q. 3: Where can the Board find documentation that the three acceptance criteria-general and local buckling criteria, and the pressure criteria-are part of the CLB? A. 3: (All). In general, the CLB as defined in 10 C.F.R. § 54.3 includes NRC approvals as well as design basis information contained in a plant's Updated Final Safety Analysis Report ("UFSAR"). The general buckling criterion (uniform thickness of:0.736") is part of the CLB as documented in the NRC's approval of this criterion in the April 1992 NRC Safety Evaluation attached as Applicant's Exhibit 37. The local buckling criterion (0.536" in the tray configuration described in Part 2 of AmerGen's Direct Testimony and as shown in Applicant's Exhibit 11) and the pressure criterion (0.4907 over circular areas of diameters up to 2.5") are part of the CLB as documented in the design basis information contained in the I-WA/2820761 (Part 2 SurRebuttal) 2 of 6
OCNGS UFSAR. Relevant pages of the UFSAR are attached as Applicant's Exhibit 38. The Table of Contents to the UFSAR shows that Section 3.8 addresses the "DESIGN OF CATEGORY I STRUCTURES." Section 3.8.2.1 discusses the drywell shell as part of the containment, which is a Category I structure. Section 3.8.2.4.1, discusses the "Drywell." Section 3.8.2.5, entitled "Structural Acceptance Criteria" states, with italics added for emphasis: The Structural Acceptance Criteria relating the design and analysis results for the loads and load combinations given in Subsection 3.8.2.3 to the allowables,. is presented in Subsection 3.8.2.4 and other referenced documents. The Basic Design phase of the Containment System is given in Subsection 3.8.2.4 and the references listed in Subsection 3.8.6. These reference documents must be addressedto obtain complete information. It is clear, therefore, that the references in Section 3.8.6 provide the detailed information about the CLB acceptance criteria. Section 3.8.2.8, entitled "Drywell Corrosion" states: During 14R, UT measurements were taken from the outside of the drywell vessel in the sand bed region. Measurements were taken in each of the ten sand bed bays. The results of the inspection and the structural evaluation of the "as found" condition of the vessel is contained in Reference 44 [TDR- 1108]. As documented in the TDR,. the vessel was evaluated to conform to ASME code requirements given the deteriorated thickness condition." Reference 44 is listed in Section 3.8.6 as the "GPUN Technical Data Report TDR- 1108, 'Summary Report of Corrective Action Taken from Operating Cycle 12 through 14R', April 28, 1993", which is Applicant's Exhibit 27 ("TDR-1108"). Page 17 of TDR-1108 states: I-WA/2820761 (Part2 SurRebutal) 3 of 6
Acceptance Criteria - Local Wall: If the thickness for the evaluation is less than 0.736 inches, then the use of specific GE studies is employed (Ref. 2.21). These studies contain analyses of the drywell using the pie slice finite element model, reducing the thickness by 0.200 inches in an area 12 x 12 inches in the sand bed region, tapering to original thickness over an additional 12 inches, located to result in the largest reduction possible. This location is selected at the point of maximum deflection of the eigen-vector shape associated, with the lowest buckling load. The theoretical buckling load was reduced by 9.5 % from 6.41 to 5.56. Also, the surrounding areas of thickness greater than 0.736 inches is [sic] used to adjust the actual buckling values appropriately. Details are provided in the body of the calculation. Note that the TDR's discussion of the local "wall" criterion includes only GE's modeling of 0.536" in the tray configuration as shown in Applicant's Exhibit 11. It does not include any other thickness or configuration. As the quote above shows, the TDR identifies "(Ref. 2.21)" as the basis of its local buckling criterion. Reference 2.21, listed on page 5 of the TDR, is the "GE Letter Report, "Sandbed Local Thinning and Raising the Fixity Height Analyses (line Items 1 and 2 in Contract # PC-0391407)", dated December 11, 1992." This Letter Report contains GE's analysis of 0.536" in the tray configuration. It is attached as Applicant's Exhibit 39. Page 18 of TDR- 1108 discusses the pressure criterion, establishing the "required minimum thickness" for "Very Local Wall (2Y2 Inch Diameter)" to be 0.490". In A. 16 of AmerGen's 'Direct Testimony, we provided references for the Board to find how the CLB is carried through for License Renewal. I-WA/2820761 (Part 2 SurRebuttal) 4 of 6
Q, 4: Is there another document that explains the technical basis for the established acceptance criteria and describes the modeling of the drywell used in the GE analyses upon which the acceptance criteria were established in the 1990s? A, 4: (All) Yes. The presentations AmerGen provided to the Advisory Committee on Reactor Safeguards ("ACRS") License Renewal Subcommittee on January 18, 2007, and the full ACRS on February 1, 2007 are attached as Applicant's Exhibits 40 and 41. Slides 15 through 35 from the January 18 meeting describe the modeling of the drywell and buckling analysis in GE's December 11, 1992 Letter Report (Applicant's Exhibit 39). Slides 36 through 45 of Applicant's Exhibit 40 summarize General Electric's ASME Section VIII Stress Analysis. Similar information is also summarized in Applicant's Exhibit 3, beginning on page 6-7. Applicant's Exhibits 40 and 41 [ACRS Presentations] also contain information regarding the drywell physical structure, the causes of historical corrosion in the sand bed region, the actions taken to arrest corrosion, and the actions taken to verify that corrosion has been arrested. Q. 5: Do you have anything else to add? A. 5: (MPG, PT) Yes. In our Direct Testimony, A.8, we stated that, with respect to the design and function of the drywell, "AmerGen complies with the [General Design Criteria] by meeting the applicable ASME Boiler and Pressure Vessel Code, standards, and specifications." The relevant portion of ASME Code Section III is attached as Applicant's Exhibit 42. Q. 6: Does this conclude your testimony? A. 6: (All) Yes. I-WA/2820761 (Part 2 SurRebuttal) 5 of 6
In accordance with 28 U.S.C. § 1746, 1state under penalty of perjury that the foregoing is true and correct: Michael P. Gallagher Date Peter Tamburro Date Ahmed Ouaou Date I-WA/2820761 (Part2 SurRebuttal) 6 of 6
In accordance with 28 U.S.C. § 1746, I state under penalty of perjury that the foregoing is true and correct: Michael P. Gallagher Date ir-T -br Peter Tamburro Date Ahmed Ouaou Date I-WA/2820761 (Part 2 SurRebuttal) 6 of 6
UNITED STATES OF AMERICA NUCLEAR REGULATORY COMMISSION ATOMIC SAFETY AND LICENSING BOARD Before Administrative Judges: E. Roy Hawkens, Chair Dr. Paul B. Abramson Dr. Anthony J. Baratta
)
In the Matter of: ) September 14, 2007
)
AmerGen Energy Company, LLC )
) Docket No. 50-219 (License Renewal for Oyster Creek Nuclear )
Generating Station) )
) )
AMERGEN'S PRE-FILED SURREBUTTAL TESTIMONY PART 3 AVAILABLE MARGIN
- 1. WITNESS BACKGROUND Q. 1: Please provide the Licensing Board with your names and current titles. The Board knows that a description of your current responsibilities, background and professional experience was provided in Parts 1, 2 and 3 of AmerGen's Pre-Filed Direct Testimony on July 20, 2007, so there is no need for you to repeat that information here.
A. 1: (FWP) My name is Frederick W. Polaski2 I am the Manager of License Renewal for Exelon. I-WA/2819535 (Part 3 SurRebuttal)
(DGH) My name is Dr. David Gary Harlow. I am a Professor in the Mechanical Engineering and Mechanics Department at Lehigh University located in Bethlehem, Pennsylvania. (JA) My name is Julien Abramovici. I am a consultant with Enercon Services, Inc. located in Mt. Arlington, New Jersey, but formerly worked for the Oyster Creek Nuclear Generating Station ("OCNGS"). (PT) My name is Peter Tamburro. I am a Senior Mechanical Engineer in the OCNGS Engineering Department. Q. 2: Please summarize the purpose of your testimony and overall conclusions. A. 2: (All) The purpose of this SurRebuttal Testimony is to respond to the information provided in Citizens' Rebuttal Statement Regarding Relicensing of Oyster Creek Nuclear Generating Station ("Citizens' Rebuttal Statement") and in the Pre-Filed Rebuttal Testimony of Dr. Rudolf H. Hausler, regarding the topic of available margin. Our overall conclusions, as explained below, are that Dr. Hausler and Citizens have presented no new information that would call into question our previous testimony on available margin. Q. 3: In their Rebuttal Statement, on page 3, Citizens appear to argue that "reasonable assurance" requires 95% confidence. What is your response to this argument? A. 3: (All) Citizens have never clearly explained what they meanby the term "95% confidence." In a statistical analysis of UT thickness data, this term could describe one of twodistinct concepts. It is possible to calculate a lower and upper 95% confidence limit about the mean, i.e., sample average, or a lower and upper 95% confidence limit for the data. The significant difference between these two I-WA/2819535 (Part 3 SurRebuttal) 2 of 15
confidence limits is shown in Applicant's Exhibit 43, which displays the Bay 19 internal UT grid measurements from 1992. In that Exhibit, the short dashed (blue) vertical lines indicate the +/-3G, +2aT, and c1y values for measurements which have an average of 0.800" and a standard deviation of about 0.059". The long dashed (red) lines are the 95% confidence limits computed for the mean (pt) using the student t distribution with 44 degrees of freedom. The difference between the actual measurements and the confidence limits for the mean ([t) are striking. This is because the distribution for the measurements (i. e., the 49 points), and the distribution for the mean (ii) are actually different. The distribution for the measurements is "nonnal" whereas the distribution for the mean (Ia)is the student t distribution. Consequently, describing the measurements and the confidence interval for the mean (ip) must be done precisely and carefully. Q. 4: How do Citizens use the term "95% confidence"? A. 4: (All) Citizens' Statement and Dr. Hausler's testimony suggests that Citizens are interested in the 95% confidence limitfor the data. Examples. of this argument include:
- Citizens' Exh. 39, page 6 ("the 95% confidence limits embrace 95% of all data ... defined as the mean of the data +/-
approximately two (2) standard deviations");
- Citizens' Rebuttal Statement, page 11 ("AmerGen bears the burden of evaluating the current margins using the estimated lower 95%
confidence limits for the various required parameters..."); I-WA/2819535 (Part 3 SurRebuttal) 3 of 15
Citizens' Rebuttal Statement, page 14 ("the external data do not comply with the acceptance criteria at the 95% confidence level if the thinnest measurements obtained are used."); Citizens' Rebuttal Statement, page 16 ("if the lower 95% confidence limit was compared to the acceptance. criterion"); Citizens' Rebuttal Statement, page 18 ("the lower 95% confidence limit for the thickness of certain parts of the drywell shell is below [the pressure] criterion" of 0.490"");
- Citizens' Exh. 38, page 6 ("structures do not fail by averages .... [they] fail where the deepest pit is located").
Q. 5: Is it appropriate to analyze UT measurement data in terms of a 95% confidence level for the data? A. 5: (All) No. Citizens' argument that the internal UT data should be analyzed using.a 95% confidence limit for the data is particularly absurd. This would result in an analysis that focuses on the thinnest UT data points from among the 49 internal UT measurements in each grid, effectively ignoring 48 other known data points from the same 6" x 6" grid. This approach has no scientific basis. As Dr. Harlow stated in his Rebuttal testimony (Part 3, A.22): AmerGen is primarily interested in the data within a grid
*which are between +/- two sigma about the sample average .because this region accounts for 95% of normally distributed data. If there is relatively little scatter in these data, which has been demonstrated elsewhere, so that they are also reasonably close to the sample average, then the sample average is the quantity that should be used in comparison to the general buckling criterion. The 5% of .the data outside +/- two sigma about the sample average pose no threat to buckling; however, these data are considered relative to the pressure criterion..
I-WA/2819535 (Part 3 SurRebuttal) 4 of 15
Q. 6: But AmerGen uses only the average of the 49 points from an internal grid. Why doesn't AmerGen evaluate the internal UT grid data using a 95% confidence interval about the mean? A. 6: (PT, JA, DGH) AmerGen does evaluate the 95% confidence interval of the sample average for each internal grid after each inspection to understand the variability of each.calculated average. (Applicant's Exh. 20 (41 Calc)).. The variability of the sample average demonstrates, however, that the calculated averages overtime are well behaved and repeatable. There is an equal probability that the true mean is either greater or less than the calculated sample average within the 95% confidence interval because the internal grid data are normally distributed. Based on this calculation, and based on the Grand Standard Error calculation discussed in AmerGen's Rebuttal Testimony, A. 17, it is concluded, therefore, that the average is the best representation of the thickness over the inspected area. Therefore, AmerGen uses the sample average to identify the available margin, without adjustment to include the lower 95% confidence limit. Q. 7: Citizens allege that AmerGen is being inconsistent in that it evaluated future corrosion rates using a 95% confidence lower limit about the mean, but does not do that to evaluate the mean to identify the available margin. What is your response? A. 7: (PT, JA, FWP) As described above in A.6, there is no discrepancy because this is a conservative approach. Q. 8: Citizens argue that AmerGen has "erroneously claimed it has actually calculated the minimum margins based on the lower 95% confidence limit." (Citizens' I-WA/2819535 (Part 3 SurRebuttal) 5 of 15
Rebuttal Statement, page 4 (citing Applicant's Exh. 3 at 6-15 to 6-16; Applicant's Exh. 12 at 13-14.)). What is your response? A. 8: (PT, FWP) Citizens have identified an error in AmerGen's documents. The cited margins are not calculated with 95% confidence. Citizens' first citation is to Applicant's Exhibit 3, pages 6-15 and 6-16, which are two tables from a submittal to the Advisory Conunittee on Reactor Safeguards ("ACRS"), with titles that use the term "95% Confidence Level Average Thickness." These titles are based on the second document which Citizens cite (Applicant's Exhibit 12 (pages 13-14)), the LRA Supplement submitted to the NRC on December 3, 2006, which states, for example, that "Analysis of the 2006 UT data, at the 19 grid locations,. indicates that the minimum 95% confidence level mean thickness in any bay is 0.807" (Bay #19). This is compared to the 95% confidence level minimum measured mean thickness in bay #19 of 0.806 and 0.800" measured in 1994 and 1992, respectively." The statement is not correct as written. The values in the tables in Applicant's Exhibit 3, pages 6-15 and 6-16 are simply the calculated averages for each grid. This table does not report the upper or lower 95% confidence limits or the 95% confidence interval. The statement is correct if "95% confidence level" is deleted in both locations. As discussed in A.6, above, the 95% confidence lower limit was evaluated for the sample averages, so this only a cosmetic error. Q. 9: Citizens state that "AmerGen argues that the external measurements are not accurate enough to allow margins to be determined, but AmerGen has also maintained that it can use those same measurements to determine whether the I-WA/2819535 (Part 3 SurRebuttal) 6 of 15
shell complies with the acceptance criteria. This position is unsustainable." (Citizens' Rebuttal Statement, page 10). Do you agree? A. 9: (PT, FWP, JA) No. First, AmerGen does not claim that the "external measurements are not accurate enough." The measurements are accurate over the very small area covered by the UT probe (less than 3/8" in diameter). Buckling, however, is a phenomenon that is implicated here when metal is lost over a significant area. The volumetric nature of the local buckling criterion is based on this principle: "[t]he entire [124.8 cubic inch] tray, on average, needs to corrode away for that loss of metal to be significant from a buckling perspective and to exceed the local buckling criterion." (AmerGen Dir. Part 3, A. 15). Thus any calculation of margin to the local buckling criterion must be expressed in cubic inches, not in inches, and there simply are not sufficient external UT data points to calculate such a volumetric margin. As we explained in our Direct Testimony, A.29 and A.30, in the "24 Calc." external single point UT data are averaged as a conservative method of "demonstrating compliance with the general buckling acceptance criterion." It is simply not realistic to average these data for the purpose of quantifying the actual estimated available margin. As explained in our direct testimony, in the 24 Calc. AmerGen uses conservative assumptions to demonstrate compliance with the ASME Code. These assumptions would not be appropriate for quantifying the actual available margin. "In other words, [the 24 Calc.] confirms that you meet the applicable ASME Code, but not by how much." (AmerGen Dir. Part 3, A.29). I-WA/2819535 (Part 3 SurRebuttal) 7 of 15
Q. 10: Please respond to Dr. Hausler's statement that, "[a] number of AmerGen evaluations of 'representative thickness' admit plainly that the internal grid data in certain Bays is not representative of the true mean thickness of the Bay because of the pattern of corrosion." (Citizens' Rebuttal Statement, page 12, citing Citizens' Exh. 45 at 3 (discussing this issue in Bay 1); Exh. 46 at OCLR29744-5 (discussing Bays 1, 3, 7, and 15). A. 10: (PT, FWP) Dr. Hausler is taking these documents out of context. Citizens' Exhibit 45 and 46 are documents AmerGen used to develop inputs to a future containment analysis. This analysis is a commitment AmerGen made as documented in Exhibit 10, page 11 of 13 (Commitment #18). The inputs for thickness were selected to establish a thickness profile for the sand bed that was representative but appropriately conservative in representing the current thickness conditions. In general, internal grid thickness measurements were used. When appropriate, more conservative thicknesses were used such as adjacent bay thickness or UT data from the trenches. In no cases were external UT measurements used since they are not representative of the average thickness in the bays since they were biased as the thinnest points in the bay. Q. 11: Citizens allege that Applicant's Exh.. 16, pages 34 and 92-93 "shows a 3 foot by 3 foot area that is less than 0.736 inches in average thickness." (Citizens' Rebuttal Statement, page 16). Is this correct? A. 11: (PT, JA, FWP) No. Dr. Hausler's statement is incorrect and misleading. Revision 2 of the 24 Calc. (Applicant's Exh. 16 at 92-93) concludes that there is a 3' by 3' area in Bay 19 that is "at least 0.720" thick." This is conservatively I-WA/2819535 (Part 3 SurRebuttal) 8 of 15
based on only two of the lowest external points in this 3' by 3' area. The calculation does not conclude that this area is on average 0.720" thick. First, the external point measurements are taken at locations that "are biased thin compared to their surroundings," as stated in AmerGen Dir. Part 3, A.42. So even without more information, we know that the area in question is much thicker. Second, there is a third external point within the 3' by 3' area, between the two thinner points, that measured 0.736". Third, internal grids 19B and 19C coincide with the same 3' by 3' area and they have average thicknesses of 0.848" and 0.824", respectively. These data conclusively demonstrate that the area in question is thicker. Finally, contrary to Citizens' implication, the 3' by 3' area is compared to the local buckling criterion, not the 0.736" general buckling criterion, so even if. the area was, on average, 0.720" thick, it would not be significant from a buckling perspective. Q. 12: In the previous Answer, you stated that the internal grids 1I9B and 19C coincide with specific external areas. How do you know that? A. 12: (PT, FWP) We first relied upon Applicant's Exhibit 28, which generally shows the overlap of the internal grids and trench UT locations with the external data points. That Exhibit, however, is not to scale and shows all ten bays on a single sheet of paper. We then prepared similar maps for the bays identified as a concern by Citizens (Bays 1, 13, 17, and 19). Those maps, which are an excellent representation of the location of the UT measurement locations and are essentially to scale, are provided as Applicant's Exhibit 44. I-WA/2819535 (Part 3 SurRebuttal) 9 of 15
I I Q. 13: In Dr. Hausler's Rebuttal Testimony, A.8 (referencing Citizens' Exh. 38), he 3 states that he "refined [his] calculation of the sample standard deviation." How has Dr. Hausler "refined his calculations? A. 13: (DGH) It is unclear exactly how Dr. Hausler has "refined" his calculation. In footnote 4 of Exhibit 38, he appears to provide more detail: "[t]he standard deviations derived from repeat measurements shown in Table 1 differ slightly from those previously presented, because I have used a more rigorous calculation 3 method than previously. [sic]" This statement makes very little sense, unless Dr. Hausler is correcting mathematical errors. The standard deviation for a set of measurements is defined as follows: 3 IS k=1 All standard software and all calculators use this as the definition for I standard deviation. Spreadsheets have its computation built into the computation 3 library so that its computation is simple. I cannot imagine what Dr. Hausler means by "a more rigorous calculation method than previously" used. I Q. 14: In Dr. Hausler's Rebuttal Testimony, A.I 1, he states: "the 2006 measurements 3 showed that the shell is now approximately 2 to 3% thinner overall than measured in 1992." What is the basis for this statement? A. 14: (PT, JA, FWP) We could not identify any basis for Dr. Hausler's statement other than the statement "[m]y analysis of the data." Q. 15: Do you agree with Dr. Hausler's statement? I 3 1-WA/28 19535 (Part 3 SurRebuttal) ]10 of 15
A. 15: (PT, JA, FWP) No. Visual observations and the results of the UT grid readings over time demonstrate that corrosion has been arrested. Q. 16: In Dr. Hausler's Rebuttal Testimony, A. 14, Citizens quote an OCNGS document from 1993, attached as Citizens' Exhibit 44 (on page 2) as follows: "I could not determine visually which of the thin spots are the thinnest." Does this quote accurately reflect this document? A. 16: (PT, FWP) No, the quote is egregiously taken out of context. The full quotation, with italics for emphasis, is: In addition to the dimples, there are spots that appear to be thinner than the general area. The dimples in the surface occur in these thin spots to the same degree as in the rest of the corroded portion of the shell. The "thin" spots are typically a foot to. 18" in diameter and probably comprise about 20% of the corroded area. In general, except in Bay 13, the thin spots are not readily apparent. Therefore, a more detailed characterization is difficult for the other bays
- ... f could not determine visually which of the thin spots are the thinnest. However, due to the small differences between the "thick" areas and the "thin" areas, and the amount of metal removed in preparation forthe UT
*measurements, it is highly likely that the thickness readings reportedin the UT measurements encompass the thinnest spots in the shell.
Thus, Citizens' Exhibit does not support their conclusion. Instead, it supports the opposite conclusion, that the external points are biased thin. Q. 17: In Citizens' Rebtuttal, A. 16, Dr. Hausler discusses the alleged "overgrinding" of metal at the external UT locations. In this discussion, he acknowledges that the curvature of the prepared area created an air gap on the exterior shell that may have created a bias in the 1992 UT data. He then argues that, "If this bias indeed I-WA/2819535 (Part 3 SurRebuttal) I1I of 15
exists, the only explanation offered assumes that the measured points were not overground." What is your response to this argument? A. 17: (PT) We have previously testified that "additional good metal" may have been removed at some of the external data points, leading ,to some additional conservatism in AmerGen's calculations. (AmerGen Dir. at A.42). Dr. Hausler's statement assumes that the metal removal process would have eliminated any curvature in the prepared surface, thus eliminating the bias. This is wrong. Ultimately, the question of whether these areas were "overground" or not is significantly less important than the fact that they are biased thin when compared to the rest of the shell. So we believe that Dr. Hausler's argument is a red herring. Q. 18: In Dr. Hausler's Rebuttal Testimony, A. 19, he claims that it was "unlikely" that the corrosion occurred between 1986 and 1992 "because Bays 5 & 17 are the least corroded Bays and the estimated corrosion rate in Bay 17 was not significant or was very small (no corrosion rate was even estimated for Bay 5)." He does this in an effort to show that significant corrosion is occurringor can occur on the interior embedded surface of the drywell shell in the sand bed region. Do you agree? A. 18: (PT, FWP) No. First, with respect to Bay 17, this trench was selected because it was representative of significant external corrosion, so Dr. Hausler is simply wrong. Data from bay 17 show significant external metal loss between 1986 and 1992. For example, as shown in Applicant's Exhibit 3, page 6-15, the average measurement in grid #17D was 0.922" in February 1987 and 0.817" during the I-WA/2819535 (Part'3 SurRebuttal) 12 of 15
1992 refueling outage; the average thickness in grid #17A bottom was 0.999" in December 1986 and 0.941" during the 1992 refueling outage. Second, with respect to Bay 5, Dr. Hausler's speculation of significant interior corrosion is also contradicted by all of the available evidence. We know from Barry Gordon's Rebuttal Testimony that any corrosion from the interior would be expected to be "vanishingly small and of no engineering concern." (AmerGen Reb. Part 6, A. 10). We also know from visual inspections of Bay 5 following sand removal that some exterior corrosion was experienced prior to the 1992 refueling outage. This is documented in Applicant's Exhibit 27, page 27 (the physical condition of bay 5 "was very similar to [the corrosion in] bay 3"). We know that the interior of the trench was observed visually during the 2006 refueling outage, and the surface was smooth with only minor surface corrosion. And we know from AmerGen's Direct and Rebuttal Testimony, Part 5, that the. epoxy coating is intact with no signs of deterioration, so we know that corrosion from the exterior has been arrested since 1992. Q. 19: In Citizens' Exhibit 38, page 3, Dr. Hausler states that "[d]uplicate & triplicate measurements were made externally in some bays" in 2006. Is this correct? A. 19: (All) No. In some cases two and three UT thickness values were recorded at some external locations. However, the multiple measurements were not taken at the same exact points. They were taken about 1/4-inch around the measurement points, but within the prepared area. This is documented, for example, in the 24 Calc., Applicant's Exhibit 16, on pages 171 and 176, which are the data sheets for I-WA/2819535 (Part 3 SurRebuttal) 13 of 15
bays 5 and 15. In all cases the 24 Calc. used the thinnest value recorded for each location. But Dr. Hausler then uses these "duplicate and triplicate" measurements to generate an uncertainty value for the external data: "It was then possible to estimate the measuring error form [sic] these repeated measurements." Dr. Hausler's assumption that the differences in these values can be attributed to the "error in measurement only" is wrong because these data are not from the exact same points. So Dr. Hausler's calculations are statistically improper. Q. 20: Do you have anything else to add? A. 20: (PT, JA) Yes. In our Rebuttal Testimony, A.54, we referenced ASME Code Case N513, NRC Bulletin 87-01, "Thinning of Pipe Wall in Nuclear Power Plants," NRC Generic Letter 89-08, "Erosion/Corrosion-Induced Pipe Wall Thinning" ASME Code Section XI, and API 653 in our answer to the Board's question on the statistical analysis of UT thickness measurements. Relevant portions of these documents are attached as Applicant's Exhibits 45 through 49. Q. 21: Does this conclude your testimony? A. 21: (All) Yes. I-WA/2819535 (Part 3 SurRebuttal) 14 of 15
In accordance with 28 U.S.C. § 1746, I state under penalty of perjury that the foregoing is true and correct: Frederick W. Polaski Date Dr. David Gary Harlow Date Julien Abramovici Date Peter Tamburro Date I-WA/2819535 (Part 3 SurRebuttal) 15 of 15
In accordance with 28 U.S.C. § 1746, I state under penalty of perjury that the foregoing is true and correct: Frederick W. Polaski Date Dr. David Gary Harlowg DatJ Julien Abraxnovici Date Peter Tamburro Date I-WA12819535 (Part 3 SurRebuttal) 15 of 15
In accordance with 28 U.S.C. § 1746, I state under penalty of perjury that the foregoing is true and correct: Frederick W. Polaski Date Dr. David Gary Harlow Date vici Date ienAbramb (
. Peter Tamnburro Date I-WAJ2819535 (Pari 3 SurRebuttal) 15of 15
In accordance with 28 U.S.C. § 1746, I state under penalty of perjury that the foregoing is true and correct: Frederick W. Polaski Date Dr. David Gary Harlow Date Julien Abramovici Date Peter Tamburro Date / I-WA/2819535 (Part 3 SurRebuttal) 15of 15
. UNITED STATES OF AMERICA NUCLEAR REGULATORY COMMISSION ATOMIC SAFETY AND LICENSING BOARD Before Administrative Judges:
E. Roy Hawkens, Chair Dr. Paul B. Abramson Dr. Anthony J. Baratta
)
In the Matter of: ) September 14, 2007
)
AmerGen Energy Company, LLC )
) Docket No. 50-219 (License Renewal for Oyster Creek Nuclear )
CGenerating Station) )
)
AMERGEN'S PRE-FILED SURREBUTTAL TESTIMONY PART 4 SOURCES OF WATER I. WITNESS BACKGROUND Q. 1: Please state your names and current titles. The Board knows that a description of your current responsibilities, background and professional experience was provided in Parts 1 and 4 of AmerGen's Pre-Filed Direct Testimony on July 20, 2007, so there is no need for you to repeat that information here. .A. 1: (JFO) My name is John F. O'Rourke. I am a Senior Project Manager, License Renewal, for Exelon, AmerGen Energy Company, LLC's ("AmerGen") parent company. I -WA/2819807 (Part 4 SurRebuttal)
(AO) My name is Ahmed Ouaou. I am a registered Professional Engineer specializing in civil/structural design and an independent contractor. (FHR) My name is Francis H. Ray. I am the Engineering Programs Manager at the Oyster Creek Nuclear Generating Station ("OCNGS"). II. KNOWN SOURCES OF WATER IN THE SAND BED REGION Q. 2: Please summarize the purpose of this SurRebuttal Testimony and your conclusions. A. 2: (All) The purpose of this SurRebuttal Testimony is to respond to the information provided in Citizens' Rebuttal Statement Regarding Relicensing of Oyster Creek Nuclear Generating Station ("Citizens' Rebuttal Statement") and in the Pre-Filed Rebuttal Testimony of Dr. Rudolf H. Hausler, regarding the sources of water in the sand bed region. Our overall conclusions, as explained below, are that Dr. Hausler and Citizens have presented no new information that would call into question our previous testimony on the sources of water in the sand bed region. Q. 3: Citizens have alleged that the reactor cavity concrete "trough is still subject to high temperatures that could cause the concrete to deteriorate and the condition of the trough was seen to be far from ideal in the most recent outage." (Citizens' Rebuttal Statement, page 20 (citing Citizens' Exhs. 48 & 49)). How do you respond to this allegation? A. 3: (All) Citizens' Exhibits provide no support for their conclusion that the condition of the trough was seen to be far from ideal in the "most recent" outage. The exhibits are from 1986 and 1996, not 2006. And there was no evidence of any. defects in the trough drain during the 2006 refueling outage. The trough I-WA/2819807 (Part 4 SurRebuttal) 2 of 5*
functioned as designed by conveying any water to the trough drain and, thereby, preventing water from entering the external sand bed region. Q. 4: Citizens allege that "[t]he plant could be forced into an outage that requires the fuel cavity to be flooded before there is any chance to apply measures to mitigate leaks in the cavity liner." (Citizens' Rebuttal Statement, page 19; Rebuttal Testimony, A.23, citing AmerGen Dir. Part 1, A. 17). How do you respond to this allegation? A. 4: (AO, JFO, FHR) As stated in Part I of this SurRebuttal Testimony, A.4, AmerGen has committed to apply a strippable coating "to the reactor cavity liner to prevent water intrusion between the drywell shield wall and the drywell shell duringperiods when the reactor cavity isflooded." This includes forced outages. Further, as stated in AmerGen's Direct Testimony, Part 4, A.6, "forced outages when the reactor cavity had to be filled with water are rare, and OCNGS has not experienced such an outage since at least 1990." Q. 5: Citizens allege that AmerGen has failed to account "for other forced outages that could lead to condensation on the exterior of the drywell surface." (Citizens' Rebuttal Statement, page 23; Rebuttal Testimony, A.23). How do you respond? A. 5: (All) Citizens are wrong. Mr. Gordon's analysis assumed that the exterior surface of an uncoated drywell shell is exposed to water for 3.0 days every two years. The average duration of OCNGS's past four refueling outages, since AmerGen took over management, however, has been 26 days. Thus, Mr. Gordon's analysis contains margin to account for potential drywell entry time during forced outages during which condensation is assumed to be present.. I-WA/2819807 (Part 4 SurRebutai) 3 of 5
Nevertheless, such condensation remains highly speculative. Citizens fail to recognize that, as described in AmerGen's Direct Testimony, Part 4, A. 16, there was no evidence of condensation on the exterior of the drywell shell in the sand bed region at any time during the 2006 outage, even while the drywell chillers were in operation. Thus, even if there is a theoretical potential for condensation, there is no evidence that it has actually taken place. Citizens present no evidence that it has, or even that it is likely. As a result, "the potential for condensation is entirely speculative." (AmerGen Dir. Part 4, A. 17). Q. 6: Do you have anything else to add? A. 6: (All) Yes. In our Direct Testimony, A.9, we discussed the results of the reactor cavity liner leakage inspections during the 2006 refueling outage, and in our Direct Testimony, A. 10, and Rebuttal Testimony, A.6, we discussed the results of the daily and quarterly poly bottle inspections from the Torus Room since March 2006. Relevant portions of the completion documentation for these inspections are attached as Applicant's Exhibits 50 through 56. Q. 7: Does this conclude your testimony? A. 7: (All) Yes. I-WA/2819807 (Part 4 SurRebuttal) 4 of 5
In accordance with 28 U.S.C. § 1746, 1 state under penalty of perjury that the foregoing is true and correct: D -at Jo O'Rourke Date Ahmed Ouaou Date Francis H. Ray Date I-WA/2819807 (Part 4 SurRebuttal) 5 of 5
In accordance with 28 U.S.C. § 1746, 1 state under penalty of perjury that the foregoing is true and correct: John F. O'Rourke Date Ahmed Ouaou Date
/
rancis H. Ray Date 1-WA/2819807 (Part 4 SurRebuttal) 5 of 5
UNITED STATES OF AMERICA NUCLEAR REGULATORY COMMISSION ATOMIC SAFETY AND LICENSING BOARD Before Administrative Judges: E. Roy Hawkens, Chair Dr. Paul B. Abramson Dr. Anthony J. Baratta
)
In the Matter of: ) September 14, 2007
)
AmerGen Energy Company, LLC )
) Docket No. 50-219 (License Renewal for Oyster Creek Nuclear )
Generating Station) )
) )
AMERGEN'S PRE-FILED SURREBUTTAL TESTIMONY PART 5 THE EPOXY COATING I. WITNESS BACKGROUND Q. 1: Please state your name and current title. The Board knows that a description of your current responsibilities, background and professional experience was provided in Part 5 of AmerGen's pre-filed Direct Testimony on July 20, 2007, so there is no need for you to repeat that information here. A. 1: (JRC) My name is Jon R. Cavallo. I am Vice President of Corrosion Control Consultants and Labs, Inc., and Vice-Chairman of Sponge-Jet, Inc. Q. 2:. Please summarize the purpose of this SurRebuttal Testimony and your overall conclusions. I-WA/2819812 (Part 5 SurRebuttal)
A. 2: (JRC) The purpose of this SurRebuttal Testimony is to respond to the infonnation provided in Citizens' Rebuttal Statement Regarding Relicensing of Oyster Creek Nuclear Generating Station ("Citizens' Rebuttal Statement") and in the Pre-Filed Rebuttal Testimony of Dr. Rudolf H. Hausler, regarding the epoxy coating system installed on the exterior of the OCNGS drywell shell in the sand bed region. My overall conclusions are that Citizens have presented no new information that would. call into question my previous conclusion that the epoxy coating system should preclude further corrosion of the exterior drywell shell in the sand bed region, and that Dr. Hausler's expertise appears to be fundamentally inapplicable to that epoxy coating system. II. RESPONSE TO CITIZENS' REBUTTAL Q. 3: Do you agree with Dr. Hausler's statement that "tests with the wet sponge teclmique... as standardized by NACE are quite simple to carry out and it is unclear why these tests were not done."? (Citizens' Exh. 39, page 17). A. 3: (JRC) No, I do not. Discontinuity (holiday) testing using the wet sponge technique is not required for a coating system in atmospheric service when benign exposure conditions exist, such as in the sand bed region of OCNGS. The NACE standard that Dr. Hausler refers to is SPO 188-2006, "Standard Practice / Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates." In the Forward to the NACE standard, the following statement appears, with italics added for emphasis: This standard was originally prepared in 1988 by Task Group T-6A-37, a component of Unit Committee T-6A on Coating and Lining Materialsfor Immersion Service. It 1-WA/2819812 (Part 5 SurRebuttal) 2 of 7
was reaffirmed in 1990, revised in 1999, and reaffirmed in 2006 by Specific Technology Group (STG) 03. This standard is issued by NACE International under the auspices of STG 03 on Protective Coatings and Linings: Immersion and Buried It is evident from this Forward that discontinuity (holiday) testing using the wet sponge technique is intended for use in aggressive corrosion environments, such as encountered in buried or underwater service, and not for benign atmospheric conditions such as those found in the OCNGS sand bed region. Q. 4: Dr. Hausler has.stated that "Residual stresses... can lead.to spontaneous cracking, particularly under conditions of constant vibration and fatigue and elevated temperature." (Citizens' Exh. 39, page 17). What is your response to this statement? A. 4: (JRC) Dr. Hausler's statement demonstrates a lack of understanding of the exposure conditions of the three-coat epoxy coating system applied to the drywell exterior in the OCNGS sand bed region. The exterior surface of the OCNGS drywell in the sand bed region is not subject to vibration or flexure (fatigue) during normal plant operations, and as stated in AmerGen's Direct Testimony, Part 6, A. 19, the reasonable operating internal temperature in the sand bed region ofl130'F is far below the maximum allowable continuous temperature limit of the three-coat epoxy coating system (250'F). Applicant's Exhibit 35 (Devran 184 data sheet). Q. 5: Dr. Hausler also warns that "epoxy coatings are subject to spontaneous delamination as a consequence of abrupt pressure drops." (Citizens' Exh. 39 at 17). Does this warning apply to the coating on the exterior sand bed region? I-WA/2819812 (Part 5 SurRebuttal) 3 of 7
A. 5: (JRC) No, it does not. The only pressure changes that will be encountered in the OCNGS exterior sand bed region will be as a result of changes in environmental conditions within the reactor building that would result in slow increases and decreases of pressure. Small, slow fluctuations in atmospheric pressure will not cause the "spontaneous delamination" phenomenon proposed by Dr. Hausler. Q. 6: Please respond to Dr. Hausler's allegation in A.18 that "areas of the shell in the sandbed region were not coated with epoxy because they are inaccessible." A. 6: (JRC) Citizens' A. 18 makes clear that Dr. Hausler bases his allegation on two documents: Citizens' Exhibits 40 and 41. As discussed below, neither of these documents supports Dr. Hausler's allegation. Exhibit 40 is a November 2006 AmerGen e-mail discussing the possibility that parts of the exterior drywell shell in the sand bed region are not coated with epoxy. It states that "[a]ssuming there are areas that could not be accessed and/or protective coating applied. . ." And its discussion is based entirely on a historical document that pre-dated the cleaning and coating of the exterior shell.. Therefore, this historical source cannot possibly provide reliable evidence of whether areas of the shell were not coated because it was written before the coating was applied. Exhibit 41 also does not support Dr. Hausler's allegation, for the same reasons as Exhibit 40. Exhibit 41 is a two-page excerpt from a GPUN evaluation written in December 1992. The evaluation similarly talks about the coating of the exterior of the drywell shell in the future tense, for example: "some patches of the drywell exterior may be left uncleaned and/or uncoated." I-WA/2819812 (Part 5 SurRebuttal) 4 of 7
The workers who inspected the external coating in all ten bays during the 2006 refueling outage confirmed that all of the areas were coated. These actual visual observations clearly trump Dr. Hausler's speculation, which is based on documents that pre-date application of the epoxy coating. II. DR. HAUSLER'S EXPERTISE Q. 7: Are you aware of any new information about Dr. Hausler's expertise with regard to the OCNGS epoxy coating system? A. 7: (JRC) Yes. Citizens submitted additional information about Dr. Hausler's qualifications and the papers he has authored in their response to AmerGen's Motion in Limine of July 27. Dr. Hausler identified some articles that are attached as Applicant's Exhibit 57 (R. H. Hausler, et al., "Corrosion Management in the Arun OilField," 1996), Applicant's Exhibit 58 (R.H. Hausler, et al.,
"Development of a Corrosion Inhibition Model I: Laboratory Studies," 1999), and Applicant's Exhibit 59 (R.H. Hausler, et al., "Development of a Corrosion Inhibition Model II: Verification of Model by Continuous Corrosion Rate Measurements Under Flowing Conditions with a Novel Downhole Tool," 1999).
I was not able to retrieve these. documents in time to incorporate any comments on them into AmerGen's Rebuttal Testimony. I have now reviewed these papers and the topics discussed in them confirm that Dr. Hausler's expertise is primarily in oil field applications that have very little in common with OCNGS epoxy coating system and the benign sand bed region environment that the epoxy coating system is exposed to. I-WA/2819812 (Part 5 SurRebuttal) 5 of 7
In closing, my review has identified no evidence that Dr. Hausler serves on any NACE or EPRI or other technical committees, or has any experience related to coatings in atmospheric service. Q. 8: Does this conclude your testimony? A. 8: (JRC) Yes. I-WA/2819812 (Part 5 SurRebuttal) 6 of 7
In accordance with 28 USC. § 1746, 1 state under penaly of perjury that the foregoing is true and correc:t R.Cavaflo Date I-WAt4IL9912 (PutS5 SurRobuauJ) 7o 7 of 7
UNITED STATES OF AMERICA NUCLEAR REGULATORY COMMISSION ATOMIC SAFETY AND LICENSING BOARD Before Administrative Judges: E. Roy Hawkens, Chair Dr. Paul B. Abramson Dr. Anthony J. Baratta
)
In the Matter of: ) September 14, 2007 AmerGen Energy Company, LLC )
) Docket No. 50-219 (License Renewal for Oyster Creek Nuclear )
Generating Station) )
) )
AMERGEN'S PRE-FILED SURREBUTTAL TESTIMONY PART 6 FUTURE CORROSION I. WITNESS BACKGROUND Q. 1: Please state your names and current titles. The Board knows that a description of your current responsibilities, background and professional experience was provided in Parts 1, 2 and 6 of AmerGen's Pre-Filed Direct Testimony on July 20, 2007, so there is no need for you to repeat that information here. A. 1: (BG) My name is Barry Gordon. I am an Associate with Structural Integrity Associates, Inc. ("SIA"), located in San Jos6, California. I-WA/2819833 (Part 6 SurRebuttal)
(EWH) My name is Edwin Hosterman, and I am a Senior Staff Engineer in the Corporate Engineering Programs Group in Exelon's Headquarters in Kennett Square, Pennsylvania. Q. 2: Please summarize the purpose of this SurRebuttal Testimony and your overall conclusions. A. 2: (All) The purpose of this SurRebuttal Testimony is to respond to the information provided in Citizens' Rebuttal Statement Regarding Relicensing of Oyster Creek Nuclear Generating Station ("Citizens' Rebuttal Statement") and in the Pre-Filed Rebuttal Testimony of Dr. Rudolf H. Hausler, regarding the potential for future corrosion of the exterior drywell shell in the sand bed region. Our overall conclusions are that Dr. Hausler's Testimony, once again, is based on inapplicable analyses and mistaken assumptions, and that Dr. Hausler's expertise appears to be fundamentally inapplicable to theactual conditions of the drywell shell in the sand bed region. II. POTENTIAL CORROSION RATE Q. 3: Dr. Hausler has opined that sand bed region "corrosion could be as rapid as it was in the presence of the sand." (Citizens' Exh. 39, page 17). Do you agree with this statement? A. 3: (BMG) No. There are three main reasons why this would not be the case. First, the drywell corrosion mitigation steps as described throughout AmerGen's testimony, such as applying a strippable coating to the reactor cavity liner, removing the sand, clearing the drains, and installing a three-layer epoxy coating system on the exterior drywell shell surface, will prevent this high rate of corrosion. Second, as described in my Rebuttal Testimony, A. 14, due to the above mitigation steps, the expected time of wetness, Tw, on the drywell shell has been dramatically I -WA/2819833 (Part 6 SurRebuttal) 2 ofl10
reduced to the point where the coated drywell exterior could be dry all of the time. If there is no moisture, there is no corrosion. Third, as described in my Rebuttal Testimony, A.7, the rate of general corrosion decreases with time due to the formation of corrosion products/films on the metal surface. Therefore, any subsequent corrosion on a freshly-wetted, previously corroded surface would not corrode at the same rate as measured previously. General corrosion rates typically decrease with the square root of time.. Q. 4: With respect to potential corrosion from the interior, Dr. Hausler has testified that
"[c]onsiderably higher short term [interior] corrosion rates have probably occurred. In the absence of any good information on this issue, I believe it would be prudent to allow for an interior corrosion rate that is a multiple of 0.002 inches per year, if new water is introduced into, the interior floor by repairs to control rod drives, use of the containment spray, or other sources." (RebuttalTestimony, A. 19). Is this realistic?
A. 4: (BMG) No, for the reasons provided in Part 6 of AmerGen's Rebuttal Testimony, A.9 and A. 10. "Any corrosion [in the interior embedded drywell surface] would be vanishingly small and of no engineering concern." This is due to the high pH of any water in contact with the interior surface of the embedded drywell shell, the lack of measurable corrosion on the newly-exposed shell surface during the 2006 refueling outage, and the inerted air environment inside the drywell during operations. Any new water introduced on to the concrete floor by "repairs to control rod drives, the use of containment spray, or other sources" will have its pH subsequently increased due to the high solubility of calcium hydroxide, Ca(OH) 2, i.e., the most soluble cement paste compound, from the concrete. This phenomenon is document in L. I-WA/2819833 (Part 6 SurRebuttal) 3 ofl10
I 3 Bertolini, et al., Corrosionof Steel in Concrete - Prevention,Diagnosis,Repair, Wiley-VCH, Weinheim, Germany, 2004, page 57. Relevant excerpts are attached as Applicant's Exhibit 60. Q. 5: Apparently based on the interior corrosion rate of 0.002" per year postulated in Dr. 3 Hausler's Testimony, A. 19, Citizens' argue that, "[iun the absence of any good information on this issue, it is prudent to allow for a corrosion rate of up to 10 mils per year after new water is introduced onto the interior floor by repairs to control rod drives, I the use of containment spray, or other sources." (Citizens' Rebuttal Statement, page 23) Do you agree with this statement? A. 5: (BMG) There is absolutely no justification for multiplying this assumed general 3 corrosion rate of 0.002" per year by a factor of five to derive an even a more dubious general corrosion rate of 0.010" per year. It is important to note that normal corrosion engineering practice is to conservatively double the general corrosion rate to provide I extra margin, not to multiply the general corrosion rate by a factor of five. 3 The general corrosion rate of carbon steel embedded in clean concrete, i.e., no chlorides or carbon dioxide, is negligible (<0. 000008" per year). This value is based on I L. Bertolini, et al., Corrosion of Steel in Concrete - Prevention, Diagnosis,Repair, 3 Wiley-VCH, Weinheim, Germany, 2004, page 74. (Applicant's Exh. 60). Even in the presence of aggressive substances such as chlorides or carbon dioxide, which degrade the I passive film formed on the carbon steel surface, at a high relative humidity (RH) of 80% 3 and 90%, respectively, the general corrosion rate of steel is approximately only 0.0006" per year, as described in Applicant's Exhibit 60, page 74. I 1-IWA128 19833 (Part 6 SurRebuttal) 4 of 10
Thus, Citizens' postulated internal surface proposed corrosion rate is unreasonable and the added margin multiplier factor lacks any engineering basis. Q. 6: Citizens state that the total (annual) corrosion rate couldbe 0.050" per year (Citizens' Rebuttal Statement, page 11). This is based on their estimate that "[f]uture corrosion rates after refueling outages are up to 0.01 inches per year from the interior and 0.39 inches per year. from the exterior. The total corrosion rate could therefore be approximately 0.05 inches per year." Is this a reasonable estimate of the potential corrosion rate? A. 6: (BMG) No. The highest historical general corrosion rate ever measured in the OCNGS sand bed region of 0.039" per year took place in a corrosion system consisting of water-saturated sand in direct contact with an uncoated carbon steel drywell. That corrosion system no longer exists, so the corrosion rate value is no longer valid. The corrosion system has changed as follows:
- The water-retaining and ion-containing sand has been removed
- The ingress of additional water has been mitigated
- The carbon steel drywell has been coated Nevertheless, as I described in my Rebuttal testimony, A. 15, even "if I assumed that the highest levels of corrosion ever experienced in the sand bed region could recur, the total potential corrosion rate," when accounting for the time of wetness ("T,"), is only 0.007" over two years.
Citizens' estimate of the interior corrosion rate of 0.010" per year is unjustified, for the reasons described in A.5, above. Citizens also add 0.001" per year, for no apparent reason. Thus, there is no basis for a total corrosion rate of 0.50" per year. I-WA/2819833 (Part 6 SurRebuttal) 5 ofl10
Q. 7: Dr. Hausler cites the "Handbook of Chemistry and Physics" to counter AmerGen's position that "corrosion product occupies from 7 to 10 times the volume of the iron from which it originates." (Citizens' Exh. 39, page 18). Please respond to Dr. Hausler's statement. A. 7: (BMG) In the information cited by Dr. Hausler from the "Handbook of Chemistry and Physics," the relative densities of iron and its common corrosion products are based on theoretical values of pure oxides. In reality, oxides are not pure and usually occupy much larger volumes due to defects in the oxide/hydrate structure such as vacancies and voids. III. AIR FLOW IN THE SAND BED REGION Q. 8: Is Dr. Hausler correct when he says that "the exterior of the sandbed region.., has very limited air exchange"? (Citizens' Rebuttal Testimony, A22). A. 8: (EWH) No. While the exterior of the sand bed region is not served by forced ventilation, air exchange will occur in the sand bed region in response to temperature changes in the drywell shell and the surrounding air. As explained in AmerGen's SurRebuttal Testimony, Part 1, A.3, Applicant's Exhibits 4 and 7 show that the drywell vents penetrate the concrete at the top of the sand bed region. The gaps between the vent headers and the concrete provide substantial area for air flow, as do many piping penetrations from the drywell. All of these openings combined with the air gap between the drywell liner and the concrete shield walls create a "chimney" which will tend to promote airflow in this area. In particular, as the drywell liner heats up following an outage, the resulting temperature differential between the drywell shell and the surrounding air will induce natural circulation air flow in the sand bed region. Q. 9: Citizens have alleged that AmerGen's testimony uses the incorrect equation to determine the evaporation rate of water from the drywell shell surface following an outage. I-WA/2819833 (Part 6 SurRebuttal) 6 oflO0
Specifically, Dr. Hausler states that because the air in the sand bed region is "totally stagnant," the equation used "describes a steady state, while the rate of evaporation in the confined space of the sand bed area would have to be described by a transient equation." (Citizens' Exh. 39, page 19). Is Dr. Hausler correct? A. 9: (EWH) No. As I stated in my response above (A.8), the air in the sand bed region is not stagnant. Since air can, and does, flow through this area, the evaporation in this region would not have to be described by a transient equation. Q. 10: In your direct testimony (A.19), how did you account for the potential low velocity of air across'the shell surface? A. 10: (EWH) I conservatively accounted for the low velocity of air across the shell by setting the wind velocity equal to zero. At this point, the evaporation is strictly governed by differences in saturation pressure between the water film assumed on the drywell exterior, and the air in the sand bed region. Q. 11: Please explain why it is acceptable to use a velocity of zero in this equation, rather than using a different equation altogether. A. 11: (EWH) Because air is free to be exchanged in the sand bed region, but the velocity is not known, setting the value equal to zero conservatively limits evaporation to differences in saturation pressure, which are temperature-driven. Because air is free to flow through the area, the air will not saturate and steady state equations will adequately describe evaporation in this area. Q. 12: Do you agree with Dr. Hausler that, "[i]t is therefore likely that in the event of water leakage into the region, the air in the sandbed region would become fully saturated during the outage (transient phenomenon). It would then have very limited capacity to absorb I -WA/2819833 (Part 6 SurRebuttal) 7 of 10
moisture as the temperature increased with plant start up."? (Citizens' Rebuttal Testimony, A22). A. 12: (EWH) No. Once again, because air is free to circulate through this region, the air in the sandbed region will not become fully saturated, so Dr. Hausler is wrong. Q. 13: Do you agree with Dr. Hausler that "[t]he ability of neew air.to reach the sand pocket has been reduced by the placement of tubes leading to polystyrene bottles in the sand bed drains. Thus, it is likely that any moisture on the exterior of the shell would evaporate slowly."? (Citizens' Rebuttal Testimony, A22). A. 13: (EWH) No. As I stated in A.8, above, significant air flow area exists in the sand bed region, even with the drainage tubes installed in the sand bed drains. IV. DR. HAUSLER'S EXPERTISE Q. 14: Mr. Gordon, are you aware of any new information about Dr. Hausler's expertise with regard to the potential corrosion rate in the OCNGS sand bed region? A. 14: (BMG) Yes. Citizens submitted additional information about Dr. Hausler's qualifications and the papers he has authored in their response to Amergen's Motion in Limine of July
- 27. Dr. Hausler identified some articles that are attached as Applicant's Exhibits 57, 58, and 59. 1was not able to retrieve these documents in time to incorporate any comments on them into AmerGen's Rebuttal Testimony. I have now reviewed these papers and the topics discussed in them confirm that Dr. Hausler's expertise is primarily in oil field applications that have very little in common with the OCNGS sand bed region.
Q. 15: Do you have anything else to add? A. 15: (BMG) Yes. In my Rebuttal Testimony, A. 10, 1 compared the chemistry sample results of water from the drywell shell interior to the guidelines in NRC Generic Aging Lessons 1-WA/2819833 (Part 6 SurRebuttal) 8 of 10
Learned (GALL) Report (Vol. 2, Rev. 1, at 11 A. 1 through 5). Relevant portions of the GALL Report are attached as Applicant's Exhibit 61. Q. 16: Does this conclude your testimony? A. 16: (All) Yes. I-WA/2819833 (Part 6 SurRebuttal) 9 ofl10
In accordance with 28 U.S.C. § 1746, 1 state under penalty of perjury that the foregoing is true and correct: Barry Go/don Date Edwin Hosterman Date I-WA/2819833 (Part 6 SurRebuttal) 10 of 10
In accordance with 28 U.S.C. § 1746, I state under penalty of perjury that the foregoing is true and correct: Barry Gordon Date a Host-,i rm Edwin Hosternian Date I-WAJ2819833 (Part 6 SutRebuttal) 10 of 10
DOCKETED USNRC UNITED STATES OF AMERICA September 17, 2007 (7:45am) NUCLEAR REGULATORY COMMISSION OFFICE OF SECRETARY
. RULEMAKINGS AND ADJUDICATIONS STAFF ATOMIC SAFETY AND LICENSING BOARD Before Administrative Judges:
E. Roy Hawkens, Chair Dr. Paul B. Abramson Dr. Anthony J. Baratta
)
In the Matter of: ) September 14, 2007
)
AmerGen Energy Company, LLC )
) Docket No. 50-219 (License Renewal for Oyster Creek Nuclear )
Generating Station) )
) )
AMERGEN'S PRE-FILED SURREBUTTAL TESTIMONY EXHIBITS EXHIBITS 37-61
- b API:I EXBITi37 Aprl24**19929 AAN'TfS-- Z:
D -kt;Ho 50-219 Distribution: V ckaVfile l- Mr.-
,JohnvJ. Barton NRC&Local - PDRs -4 Plant ACRS (10)
CWHehl, RI
.- *i*VcePresildenht-San:.,Dr~ector J ,:i.:;"*:**i . u ._ Nu d `ea* r CorPorat.ibn . . ., "SVarga " " * :-J.Ca3;vo Oystmer Ceek.:Nuclear: Generating .Station .- SNorris ,. Postr Offtice,,Box 388 - ADromerick River, ForkedI!,-;.:;*;:. .;. . . -.:-.-.: JNew - : .ersey: 08731 -GC - ." : :CPTan " "
Dear Mr. Barton:
.. .. '
SUBJECT:
EVALUATION REPORT CN STRUCTURAL INTEGRITY OF THE OYSTER CREEK 1 "DRYWELL (TAC NO. M79166). The staff has completed the review-and evaluation of the stress analyses and stability analyses reports of the corroded.drywell with and without the sand bed. Our. evaluation reportis containedin the enclosure.- GPUN.used the analyses to Justify the removal-.of~the-sand from the sand .bed-region. Even
- ,,.,though
... the staf f'-with.the assistance of consultants'from Brookhaven National *: !->:*Laboratory.(BNL),:concurredwith GPUN's.conclusion.that the drywell meets the ASHE-Section III -Subsection. NErequirements;-i-ý:t is essential that GPUH continue >..,"i-".'.UT.thickness"nieasurements-at're-fuel ing:.9.utages: and at outages.f opportunity m . f;,ortheli fe :of .'the-.plant;Y:The:measurements'should cover, not only. areas-.
previously"inspected but also accessible areas which have never, been inspected so as-.to confirm that the thickness. of the corroded areas are as projected and the corroded areas are )ocalized....-. 3 -we..request that you reispond.. tihn-30 days of receipt of this letter
.,ndicatin your intent -to comply with the .above requirements as discussed in *"'the "Safety Evaluation*. .. *I The requirements of this letter-affect fewer than 10]respondents, and therefore, are not subject ..,P.L.-96-511, .. to.z-:--Office of Management and Budget -review under I,:Sincerely, 0Alexander . Dromerick, Sr. Project Manager PDR 000O19Project )R:DDCK 0078 ADOK 05000219`':
920424 " iiino Directorate RatrPoecs-II DivisionrofeReactor 1-4 Projects -I1/11
- PDR . Office of Nuclear Reactor Regulation 'Enclo*isure:.
i_ *. stated ..-...
-'As':'. :u .. u . . ' ..:s cd tW/enclosure: ..... ." L.I...
iSee nextpage . .... " . OFFICIAL:.
-. RECORD COPY. . Document Name: 1479166 OFC ::,..,,'.LAA:PDI-4 :PH: -4 . :D:PDI-4 : ............. q..9. :4, ... ..tý.,4,"I.i.% t 4. .. - . :
* .. oI. . . . . .
Kr oh BronOser Creek"Nuclear 1PU uclear Corporation- GeneratgSaio p..E'ns L. Blake, Jr., Esquire Resident Inspector Shaw, Plttman, Potts & Trowbr..ge.. o*oU.S. Nuclear Regulatory Co..ission .. 2300'N Street, NW., Post' Of fice Box,445.). Wahigon D 007Forked River, New.Jsey 08731ýý
-ýitRekional Administrator, .-... *" -. Region. IKent Tosch,Che "" :
U.S.-Nuclear.Rpaoy Coinuission NeW'Jersey Department of'-
, 47 Allendale Road . -..- , Protection:"Environmental . ."'- ... **:- *. -
S.ý..King of..Pruss ,ia,j.ennsylv~ana 194'06 Bu~reau* of.Nuclear Engineering -. , :
~ *'~.'~ .CN 415 ..
Bk:LiEn, gB'.. a... an ....... Irenton New.Jersey 08625 -
.- 1 U Pond -'Roadn ."-:*ee ~ asppany,. New Jersey075 * . .. ?.... . . ~acy own s Ip.- .KZ.~18 Wst:-Lacey"Road d Ri.ver flew Jerse 08731 ...
- ?-. P:-230 1. Str et Ng - .-.. . . . . .:.::.o t O f c 4 -*..... .... .. . .. I.*
',OseýCe ula Generating 'Station.
_*
. a <....;:.' . -ýKail h Stoo:..-Site n t n - 0 .2 EegnyBd Pot-Of fi6e Box 388 0 7 " J .:.. . : .:. . : . o k d R v r ..
Ne --e se 08 3 . . . - .. -- - I N
*1".Forked ' :._.;-. R J r e::: 08. 3..-.. .. . .. . .. ... ,:ew
- .. :., . .. -- ...... . .:.._ . J.r:..,:....
- : 5- I-.:: , . . ':: ..* - -.* - - -- ' ? .- ...: '.:- :; " , . .. . . . - . ...... . ...- . N 4 " . .
'L.-:*::*. (Bg.' -.:.".?*... ..lIi .en l--n:T H enat oer ; ew *lrs y 86 5i W
,.-.c... 1 -... .- ...... - . ~ . -UNITED STATES NUCLEAR REGULATORY COMMIsSION . WASHINGTON, D. C. 20555 I ~..~
- SHFETWvEEALUATIO.bWB* ~E:- t~iEvOF,,4UCL,!EAR,ý-RE-ACTOR R-EiGULATIO0 0R~YWEUL.-STRUC;TURAL- INTEGRITY OYSTER -CREEK*. NUCLEAR,GENERATING STATION VU.T "HUCLEAR CORPORATION -.
.- , tat *-.~ -'i h * - .', "NO' -.50-219 OC-KET :- el'l2:.:-Si c -t en .-.- .I N'RODUCTION .: ; *.R: O 3 -. . 1 1 A ..-"
n
- 1986 the steel dryell 7at: Oyste Ceek Nu'clear..Generating Station (OCNGS)
';`'was found to bdex~tn "J:: G~.f~ve -. corroded in .the area of the shell which is in .- ':' .ttthe:.sand. ... o . : *-cushi . .:-'.T .' on- .- .s*...c:, . . . the around bottom - t the,drye.-n h -... ofth ,st *, GPU-luclear -. Corporat~i.onf, (GPUN, the liene 3N~~;prgamofpridc nsetinof the drywell shell sand cushion area through' n... ..
ultrasonic testing (UT) thickness measurements. The inspection.has been
~ xtended to' other areas."of. thedrywelL and sm aesaoetesn uho 7'4'~ .have been -fo'und t"o' be'corroded al~so.-'.'4From.'the UT thickness Meaiurem'ents,% one -conclude~th~at corrosion. of .thedryiwelT:shell1.n the sanid cushion~area. is "-"
- n .attempt.t iminate"" reduce.".orrosion.
the corrosion ,or.
-,.rte,--t,,e] 'icensee'.tried caithodic.-protection -and fouiidTIt;-,to be of no avail. ýý_'-,An examination*of ,the results -of "ConsecutI Ve .UT:'uieasuremiIents', c;;onfirmed that S ,nuing. ructural integrity "'fthe'.drywellca6nnot~be:asied, Sin e the-ro6t cause of. the corrosion 'in -the *1-I sand cushion -area-1s--the-.-presence-of. water in-the -has *sand.-the ýý-ý-.'.considered sand .removal to-be an,.i~mportanýt'element -inits pormt lmnt
- -"r " " ". '.. e.ll....integrity...-
th e:d-yw . . 3if"l 'the sprogram, the, ii ensefirst~eri b:liheudlthe analysis Sctteria (nd then'
- erfomed the analyse', otf.th- rrAywell ir t. 'structural:tdequacy..with and ~ the. presencOf~tesn. h licne erformed"stress. analyses: and. ~* ;-;-.:-, *+/-onta ity -_l analyses. for-.ot i*wit a.nd withou. . r and -concluded-the:
thet.so:andtases 11r-,drywell wItoriht.hea to be'incouiilInc6 witW the criteria
.; .-ýTG'~o '-establi'shed".for ;the .ree'val'uation'.'?,-.It is to be noted that'the.original purpose thle r toprovide ians.tconl ' a smooth transition of-stresses f-om t he ~fixogd pofrt *ot n i g.*-n.:natemp odohefrestanding portion of ithen .o.: . o:'e iminat~ioro steeledce drywell. th. orosion=.101"1:-*
rEl;."IAL1LAIQ1N~ Ful~.I-he staff wthe'tthe asistance of consultants from Brookhaven Nationalb " - ee.nIbor toro (BNL) tyy has reviewed and evaluated the information (Ref's. 1,2,3,4,c S ) . O.hvbrovided bythe Icensee. c - ..
- 92 43000871920424 PD ADr.A. a n d OzO021 FfýJ- -ooo .h h .th ....nd i :-.--
I B.e-Analysis Cevttf1aT-. The drywell was originally. de'signed and constructed to the requirements of I ASME Section VIII code and applicable code cases, with a contract date of July 1, 1964. The.Section VIII -Code-riquirements -for nuclear:containment vessels at that time were less detailed than at any. subsequent date. The
- 'I evolution of the ASME Section III Code for metil'conta~inments-and-its relation with ASME Section VIII Code were reviewed and evaluated by Teledyne Engineering Services (TES). The evaluation criteria used are based on ASME Section III Subsection HE Code through the 1977 summer addenda. The reason S
for the use .of the Code of this vintage is. that it was used in the"Hark I
-c...,.Containment program to evaluate the steel torus for hydrodynamic loads and ..that the current ASME Section III Subsection NE Code is closely related to that version. The following are TES's findings relevant to Oyster Creek application:
a) The steel material for the drywell is A-212, grade B, Firebox Quality (Section VIII), but-it is redesignated as SA-516 grade in Section III. b)-Y -The_!rel 6tion'- between.tlie6 .l owabl e-.stre ss Vi - V(.)-1Sect.ion
- .. -
I the stress intensity (Smc) in Section III for metal containn-ent s "*-'-I . .. :.:" I 15S Smc. "
"C) Categorization of stresses into general primary membrane, general IU 'I' bending and local primary membrane stresses.and membrane plus '
bending stresses is adopted as'in Subsection HE.
. ,ld) The effect of a locally stressed region on the containment shell is . ..
i.
- . considered in accordance~with NE-3213.10.
In addition to ASME Section III. Subsection NE Code,. the licensee has also invoked ASHE Section XI IE 7t demon rate
.,Creek drywell.l. IWE-3519.3 and IWE-3122.4 state-that it is acceptable if either.the thickness of the base metal is reduced by no more than 10% of the ',normal plate thickness or thp reducedthickness can-be shown by analysis to.: - '-satisfy . the requirements of the designl.specification.
Thestaff has reviewed the licensee's "adoption of ASME Section III Subsection
-. NE and Section XI Subsection IWE in its evaluation of the structural adequacy .
of the corroded Oyster Creek'drywell, and has found it to be generally
,:reasonable and acceptable. I By adopting the Subsection NE criteria, the licensee has treated the corroded -areas as discontinuities per NE-3213.lO, which was originally meant for change 'I .. in Athicknesses,. supports, and penetrations.. :These.discontinuities are. highly .6localized and. should be designed so that their-presence will have noeffect-on the overall behavior of the'containment shell.
W..-.
.. * .. "* .'.1; w**.- " ". . * . . "": " ... *.. .. *" .* * '- -- ' .. - ."..
NE-3213.lO defines clearly tIie" -
" *" " '-
_.
- :
i I r* i*.2.::.**::5"v*::/.* .*: :.:,*. I-.;..
- ,;-. t ....-.- ,.. .- -....- * - .-.. * -- * ,- -.- . . * .. . .*....
(I m
1 : .... Ilevel of stress intensity anfd 'the7 extent of the discontinuity to be considered _;,localized. A stress intensity'limit-of A SmcAs -spec ified at--the -boundary ofthe region'with-in which 'the membrane !stress can be higher thin 1.1- Smc.- Th rgin he~te:st -sintensity varies from-1.1 Smc to-1.OSmc: is-not
.. : ."definedin the Code.beca.se" of the . fact th.t it i: "h-h-oading. . n ~.iwof this, the licensee rationalized that the 1.1 Smc can'be applied beyond?.
I the region defined by HE-3213.1O for. localized discontinuity without any retricionthroughout the -drywell.>T.he -staff disagreed with~the licensee's
'..--interpret-tion of the Code'". staff-pointed..ut that for Oyster Creek -;-- lolz- Astresses due to internal pres-sure-shou-ld be used astthe criterion to ".- evel such a region...snten itie interpretation of Section XI Subsections IWE-1~59 3 and.IWE-3122.4'can be made only~in the'same contex. ti tf' ;*. . osit-"o .:.:*".*Jner that the retto th.oe-;le membrane primary stress-limit maed" ofontthet-1.1 Shic notster be -Creek usedm .
i:.;:"dc-iii teis, of-throughout-. nawf t-rifft-po--fnt the drywellh;> fo~ a..- *-"*:i*.: o de fse by213A to cEnider the corroded area as: localized any
.7 ..dIsont inuity, 'the extent of the'reduction in thickness due to corrosion '- ;should be-.reasonably known..-UT7thickness--measurements m'drywell, one canehave a genral idea of the overall corroded condition of the d-Arywell. shell andait. Is possible to judiciously applyethe established re ...-- "- he re-anthalyseswere made by Gebnerasl lecric for the licensee,. one 1Company U1;.;$re;nalysis considered thersand present and-the the otherdrywell . considered '
5 hout the6 sand -Each r"e-a nal ys Is comprise .a te ssanalysis. and. stabilityn1 nalsii"T,-wof ifle'lmn.mdl"v,,oeaismerc and another.-a 366. pie sl icemodel were used. - for hestre s anl , irhe ANSYS computerd-program was tsa-U4ý-ýsd-to -perform -the analyse's,,,'iThe-.axi'syiimetricnimodeI Was used to'determine'
- Ihestresses for.. the setIesmicfd thel thermal. gradien ss eie sice
. -~~odel.n -was -used, fo'r. dead -we ight.and piesr od~~ e piesliice model" - * ýicuds.t e'Vnt oipe'..:aind the eiriforcifl~ig -and was alsoused for:'
in'-iays" ý*ý-~The ,same'ndels-,wereýufid-for -the cass`-with -and without
~'~~sad,.excpttha1 te fr nr-thi-stiffnes"-0o-;*.sand in cintactý with. the hoel dse 1ewas-.consby ý.s derko .-*UT-Thetkshells-..thckneas thesAh tgyand lclregon was has ,d-fben-th7-Dufor,--th ue-mithantfcas andt be:o t he-ors the without- .!'sand -caste,'The 0.700 a claimed 1 byofthe Al c onroused ornitonservatism ,0 d he .I-isthe"sprojected thicknes n.736 the start of fuel lyat dycle 14R. The ;Z'.ame teAhicknesses tel ertheand regiomn r esedfor tw both cases.
u;re*Forathe with-sand case;,an analysis ofn.,,the..drywelc1 with the original.nominal. w -lltthicknesses n was madentotcheck thi-.shel .stresseswith the allowable zsaluesoestablshsed-for-theiiri.aalysesAs-nyJ s c. . . g 51... y'"-The -licensee b-ýsedi-hb'.sme. 1oacominbnatioins ais specified -nOseCreek's ~:
!:as~i~,.-t~be*O;70'*.for:tl'Lwlh~snd'..cae~an::t' be:O;36%)forthe ithut- ;!i edn-lodesignrsafety analysis report- (F.SAR) for theore-analysues. The licensee -- :r:.*
h tcomparison of.the loade-combinations. and corresponding allowable stress 1Ae
.
AMR,..........
.l s hhs. ......-
en WndWn7,hh x t. h In . .
.. _. ._ - -_ T I..
__
- _- . . . .
of: 19,30 &i'ý--Te C limit usin the S`ttandar~d Revie'w Plan (SRP) secti-on 3.8.2 and concl~uded they If are comparab.. .6... e ; : .--:." - The results* of te're-analyses 'indicated that the governing thicknesse's are in Sthe upper. sphere* and: the cylinder where the calculated primary menbran'e zstresses are respectively 20,360.ps and .9850 psi.-vs. the allowable 'stress*
-stresses *at*thes levels,--etween.the'with and without sand cases. Vhis '-.should be expect~d'..because.iAn,asteel shell.structure the local effect or the exeed A damped ina very'short di~stance. The stresses calculated edthe allowaible.by 3%..to 6%,-and such exceedance is actually limited t -the corroded arezi fro Umeurents. esbae However, in order to perform the:akisynrmetric.analysis and analy'sts of the pie slice oeuirm .thicknesses. were lassumed for each -section of the drywellI. Therefore, the -caliculated-over-str.essgesjnmay representt only stresses At the corroded areas. and.-
Ilikely bewinte loal sfiii:d s s _of the analyses-fo~r oinlthicknesses.' T.-he diagram in Ref. 6 indicated such a~conditlon". It is
~~'j<tobe -noted that jthe'-stresses for..the corroded areas-were obtained by . ultiplying the stresses for nominal thicknesses by the ratios between the corroded an na.- hicknesses:...
The bi~klig~anysefthdywel wer pefre in a'c'cordance with ASME
~jjCode. Case .l-284.7 ;The analyses were done on-the 360 pie slice model for both with sand and. without-stand .ases;..:Except in the 'sand cushion area where ay shell thickness 6f 0.7",f-Jnorlthes withesartd case and a shell thickness of 0.736 *for hei ou-a cse.were .. used,.: nominal shell-thicknesses were cdnsidered ' o'R fFh'SECti_6 loadcombi-ti6 -i.,-The kkl were - U '!identified -as thee involving refueling and post-accident conditions. ... applying a-facWo of safety of 2.and .1.67 for the load combinations involving refueling a d thespost-acctdentl:scondtions respectively,..- the licensee establishu e for both cases the allowable buckling: stresses which areuobtained after.sbeingtodi h e'd -by.capacity and plasticityreduction factors. It is
- -found thatthe wethout-sandacase:.for-the post-accident c isfmost aondition
..,-limiting e nf erms.of.buck ing with a'ihargin ofn14%- -The staff and its. '.xBrookhavenNational ,aboratory:(BNL) consul tantseconcur swith the licensee's - conclusion that the'Oyster.Creek.drywell.has adequate margin against buckling "- WhS no sand uoreith ssupdfor nassumed sandbed region-shell thickness of 0.736 inch :*thsn~adwtot-adcss:.Ecp i h ad uho re1hr "Acopy of BNd s iechn'6al 'evaluation report is attached to this safety With thIit
- Iliely bthe li n~thapce o ants from BNL,t e staff has reviewed and e evaluated thhe responses to the staff's concerns and the detailed re-analyss ofythe drywell for the with-sand and without-sandecases. The reanalyses by
-t:'he licensee indicated that the corroded drywell meets the requirements for NO,
5.A - dden. a . .....
'.T<he staff agrees-with the' llcerisee'.s.justification: of using the above
~'~~5imentioned Code requirements 'with one exception, the use o11Scthugut
-'2.the drywell shl.i~h'rtrafri~eýiiye'-. .:.tis' the staff's ,;:;..Position that the-primary t' membrane stress limit of 1.1 Smc. not be used -indiscriminately dtroughout the dr*ywel --,:;.-..The staff accepted the licensee's 4, vreanalyses .. "*-su~~er on -the,assumption' that a:,dpe~~n'teae'-rok the'corroded areas re*:aded, are'h~.Gd highly.localized as jcntned ndtheo~m,"-: .b..y..... c .the UT measurements.-The' .licensee's stresse.obtained for.the. .7~~cas -of reducedthickness~caz~l be interpreted torpsent thosei' h corroded' areas and..theira4djaentregions ofthe drywel shell. n view of '.Ž'
the'se observations"'itis' essential -that'jthe'licensee,perform UT thickness'
.,.easurements at:refuelinigotages-and -atoutages*of opportunity for the I ife .of...the.cover.not plant..-e i surements-should only areas..previously but also "accessible';areas which have'never, arebeen :inspected so-as th eto 'df'inspected U ::confirm that thes ssthicknesoses:of the corroded areascto asrected aN U' l.-c errtaef ae re al tzed"' sth toc of thest.'assumption s are the bases of the ',meanatyses and o the e staffr'acceptance ofn te reanalysis-results. .u - -~'sRee rncs:I" :
S.t1 Sec n- V 11; Evaluation ofo-the Oyster Creek Drywell Part 1, es Analy~sism GE Report No.-.9-1 DRF 100664 November.1990, prepared for
.PU ,.ji 7 h sand) .
2 . 'Justificati
--. he'pse on ofUSe 1bn Subsection E.1 S-Guidance in t:lnd.;-Evlutingt .theOyster Creek DrywelI.lTR-7377-1, Teledyte Engineering -- erics Noebr:!. ( Appendix Ato-Reference.1)*.' .AhASME n'3 'Sect 6n*:V1III eVa ýuat on',of ',the' Oyster. CekDrwll Part 2,
- r Sably Analysis'.. GE Report h Not.t -2 DRF 100664, Revh .lO & Rev. 1.
SNovember,:90 prptd.o.GU(wi th. sand).~ w"4i"k %hASME' et -nV 1 Evaluation fOsteirLCreek'Drywel A for
,rýA .. m te e" t a , cse e' Usrt:..Iihstress' aysislGE ReportssNo.o 9-3 DRF 100664, Rti -ofRevduOd.Fkes 199 pared nyebrutaryre nPrt sfor] t foil S5. h Ae ASe sE erttions VII;I-Evaluationa'of Oyster. CreekDrywell,
- . . - " ' . ' . *: ',. . . ' %._ * . ' : ' ': * " * ,' ' ,: *. . ' . -. = : . ' .
for Without sand' - :;
, *,L*: --"-, , '*,..
i *.,(:
,:r, Part-2 Stability Analysis' GE'Report No. 9-4, DRF 100664 Rev. 0, 4 mesuemnt I November aRev. r 1990 t prepared - for GPUN. ot "n-Diagram attached to a letter from J.hC. Devine Jr. of GPUN to NRC dated -January 17j-;.-1992 (C321792-2020, 5000-92-2094). -"Iinf Contributohr:k'CaTan ,*,NTechnical Evaluation Report: AnauystsGE,- Fv,"
- '-*.-~ -- - '- ~ - - -- - ATTACH-ME T-.-
I -- ",. BROOKHAVEN -"'F" I - *- NATIONAL *- LABORATORy TECHNICAL EVALUATION REPORT ON STRUCTURAL ANALYSES OF-ITHE CORRODED OYSTER CREEk, STEEL DRYWELL 1_ J16. Introduction -
. .An inspection of the-steel drywell.at the Oyster..Creek Nuclear.
Generating station'in Hovembier' 1986 reveailed that some-degradation due to corrosion had occiirred in the. andbed regioný-ol the shell..
'-'--Subsequent inspections ls identified thickness: de~gra'dations in .:.-tBupper. spherical and c6ylindrical -sections'of the-drywell.-.he $Ji~se,&GPU-'Nuclear Corporation;.,..-has ýperformeid*-:-.: structural
- . -analyses. "_ to.. demonstratethe integrity. te o ected
~' * ~~efelngouag ht ..... - ..- ay: -- x ist - ""hestart . ,obf. ýthe-- . four'te enth -. *'"*.-:L .. :..--,*,-,-ref ' ":".' ." ... ... . 4R. . .o.ut.a.g-. ." - ~ outa . - "is. --- 'r- . .. --
expe.te
- __"_ .. ."- '.to. start in .__ . ..
_-_
- October' 1992.':I'nan att..:p..t; , to*a-rrest the.corrosion. the" licensee ~ .pansf fem ind7EEm__onsequehit-l they
- .f h ,ve "-1 I naIy t.' y'l '.: 15'6 t h--ht, and without sand for drywell gall, 2 5 thicknesses r- 2 projected to exist at 2 9'56.25, th startof 14R outage..-'.. 3
- 2. umar of Licensees'sAnalyses
-- Te anlssperf ormed by the licensee utilized the drywell ll th.i.ckness.e.s summarized ..
y in Table 1..
,e -
r I,1
' '
Dryiwell Wall Thicknesses Table & I
.',- -' ."" As-Des igned Confidence . .
J~~.rvwll Rcrin 'Thicknesses: 14fl Thicknesses
*'1.3.-*,- - .1 . "~. --...* ' * *-.:" . '. :
ylindricaI.0.64 Region 0 0.619. r~~-Upe 1 ... . *.b .,*. .-: .* . .egion perca
,*'." . . . .. 0722 .. 0 . : - ..? :'...-:. .-: .:. .* ,-.". 0.25656257 . .: * '"I* '- M. d, Spherical Region 0.770 .723. .,LoweraSpherical . 'I!;.. . Region 1.141 .-,Sand-Ecpt SadBed Area.
Bed Region tal:-thlknsse 1 4.tsmmai*ed*n Tale*.'":.::'-.. .73 !I
- e. Table2 -1 0af bonth 'Relfnereinces' 1 and 3 indicates that the-,,,.
knuckle'.. thickness aisdw -. l"thcknss
- 26. 2 This appears'- to be a
.ms s .ekn thicks is shownto be 2-91"in Figure 1.-1 .of 'the'same report3 ,-'e'-l"l- . ,. . a fJ
-7 .... ... q I . .*
- .The stress- ana*1ysis for .the I"with sand" case is, described in
.,Refeence .1... -or his .a&nalysis* the licensee
- utilized the as-'
- thicknessesw, des-...:"-
gntd except for the- sandbed region -where !a Ith1icknfess,.of 0.-7.*'0:-wVAs-used..- The.-str-ess ':results, were obtained. from... a 'finite.. :el-,ement ana,-lhysis which utilized axis.ymmetric solid-elements.and t.he ..- ANSYS computer program. Later, the stress results were scaled to address the local thinning in areas other-than the sandbed region (thed pr'ojected 95% confidence '14R thicknesses in Table 1). The loads and load combinations considered in the
.. analysis are based-:on ..the:.FSAR -Primary.-.Containment -Design..Report-and the.1964 Technical Specification .for-the Containment.- Appendix-'
E of Reference I compares the load combinations considered in the
. analysis with thosef given in Section 3.8.2 of the NRC Standard Review Plan, Rev. 1,ý July 1981.
The stress analysis for the "without sand". case is described
.oi,,.':
a: a[ in Reference 3. For this analysis the licensee.also ut.1ized the as-designed thicknes-ses, except .f or the sandbed region. where ,a thickness of O.736"1, was used. Inthis case, two finite element
-"..modeIs7-a n-. a xis ym etr ic..a nd -an :3 6 0-'pieiS-sc'e.l.mode 1.we r e us e-d.--Z The -
iiasi snmmetr-f-icd-del-S-7s:--. E**l-- -thd- s as
-- 'th-tT7--*-j.-in--:.-.-
Reference 1; however, the elements representing the sand stiffness were removed. This model was used to determine the seismic and thermal stresses. The pie slice model was used to determine the
.:dead weight and. pressure stresses, as well as the stresses for load -;" combinations. The pie slice model included the effects of the vent pipes and the reinforcing ring in the drywell shell in the vicinity S..of each vent pipe. The drywell and vent shell were modeled using 3-dimensional elastic-plastic quadrilateral shell elements. Atla distance of 76 inches fromthe drywei3 shell, -beam elements were ....,.used to model the rbmainder. of the ventline. ;The loads and load -combinations- are-.th-.same--:as those considered-in Reference-.1. .....---
The code of record for the Oyster Creek drywell is the 1962 Edition of the ASME bode, Section VIII with Addenda to Winter 196i, and Code Cases: 1270N-5 ,1271N and 1272N"-5. -The licensee utilized
;-,,..these criteria in evaluating the..stresses in thedrywell, but also utilized guidance. from.the NRC Standard Review.Plan with regard to i allowable stresses 1for...--.service level:- C and .:the post-accident .... condition. The licensee'also used guidance from Subsection HE of !.Section III of the A:SME Code.in order to justify-.the use of a limit Fi .0f a1;IS 0 m- in evaluating the general membrane stresses in areas 6f the drywell where reduced thicknesses are specified. Based 6n these criteria the licensee has. concluded that the stresses in the ."drywell shell are w'ithin code.allowable limits for both the "with
- .sand" and "without 4and..cases.;?-.*.
- The licensee also.-performed stability analyses of the drywell for both the "with sand,, case (Reference 2) and the "without sand"'
case (Reference 4) . "For.the ."with sand" case the licensee utilized the as-designed thicknesses shown in Table 1, except in the sandbed
!-region where a thicjness of 0.700 inch was used.' For the "without ii (i:. - . : .- .. -.. .2 -. '4 , :*'
. . .'... ....... ..... . .. ..... *.*. ;..... .'
Jm sand" case the s*-me thicknesses were used , except in the sandbed
.region where -a 'thickness of 0.736 inch was-used. The buckling-*..' .- " ca~pa~biity of.th~edyw~ell for., both .the* .'.with sand" and. "wthout r**i." " 'sand"- ca-s'es :*wasrievaluat-edi-by*"usingthe 3160 .pie.. slice f inite lel'ement -model di1s:cussedt.,'above,.: For.-the.: "with sand" -case spring. eleýnents Ya,::-J. were.:used I:i h u ,.-~ ,xnsth-es.andbed-,regi n ! -,, _-t e e is ton :.to., mode.. the sand support.--- For:-the . "withoutptndu.~~dase.these spring ,elements were removed. The'! most limi-tingi.loa-d co-nbbinations: which resu.lt in the highest compressive -
stresses in *theIsandbed region were considered for the buckling analysis. *These are the refueling eg
-Load + Refueling Water Weight + External.-Pressure -+ Seismic.) -and the--post-accident condition -(Dead- Weight--+ -Live .-Load-+ Hydrostatic--
Pressure for-. Floded Drywell + tExternal Pressure + Seismic)., T, .*. The buckling evaluations performed by the licensee follow the methodology described in ASME Code Case N-284, "Metal Containment Shell Buckling Design Methods, Section III, Class MC", Approved - August 25, 1980. The -theoretical elastic buckling stress is calculated by analyzing the three dimensional finite element model
*.[;;... discussed above.l.. Then the theoretical by -..capa;citgp---.a~nd*--'ýlastilcty- buckling stress r13ýeduc!tiorn*-'*a~ctors.= is modified, .. ý----Th'e-:--all6*Qable ,. --- :-comprýessive-stress is5-obtainened-by.-dividing-the .calcXlatid-: buckling2*--
stress by a factor of safety. In accordance with Code Case !N-284 the. licensee us.ed a factor -of safety of 2.0 for the refu'eling condition and l.*67 for the post-accident condition. The capacity reduction factors .were also modified to take into account the ef~f ects of hoopLstress.
-- originally the licensee based thef hoop stress modification on data related to the' axial compressive strength of cylinders (References 2 and 4). Later the licensee revised the approach based on a review of spherical shell buckling *: . data and recalculated the drrwell buckling capacities for both the "" "with .sand" and -"without sand" cases (Reference-. 8) For the -I"with -53 .-sand" case,__-thq--licensee._reports._a__margin_.above--the_-al16wable.- -
compressive-stress of 47% -for the refueling. condition and 40% for the post-accideht condition.": For the "without sand" case, the licensee reports .margins *of.24. 5% for the refueling condit16n and 14% for the .post-accident condition. .- - . . . . - -
"'V.-"- 3, Evaluation ofLicensee's"Approach i.'*-- '.. - " . . .. ":
The analyses performed by the licensee as summarized in Section 2 and discussed more fully in References 1 through 4 have
.. .- : been reviewed nd found to provide an acceptable approach for demonstrating t. e structural integrity of the corroded Oysterl)Creek drywell. The finite element analyses performed for both the stress!
and stability elValuations are consistent with industry practice.
". Except for .the &.se of a limit of 1.IS.. In evaluating the general membrane--stress'in-areas load combinatiohs and, acceptance. of reduced drywellý criteria usedthickness, the--loadsr-by the licensee are--
consistent Standard Review. with!Plan the ...Rev. guidance 1,..July given1981. in Section. To-further3.8.2support!,itheir-of tk~e:NRC position, the licensee has provided two appendices to Reference 1.
,___.,-_ "-'-" 3I 7l t.U
- . "
It AppeixA pvIde a 1d6tJale istificatio"n for the: use of Section' 1--.I S.ses-gudanc e in" evaluating the Oyster Creek
....... dryel. epedix.*compares 7the load. combinations given in the .". F*a,,. D~es.*g~n Saf~et.nalyss.:-Reprt ... (FDSAR) with the load ."combinati6ris given.in SARP38 2 and-" demonstrates that the load' comb.nations used in, the analysis envelop those given..n.the SRP.
In the areas of the drywell where reduced thicknesses are:.
- f. .. '..general specified, the licensee membrane stxesses, has used. In a sUpport limit of of. l.1S, this. to position evaluate the' the licensee has cited te provisions of NE-3213.l of the ASME Code...
.. concerning local primary membrane stresses. "In effect, the" ' °licensee's criteria would treat corroded or degraded areas as ' " discontinuities. For.such. considerations the code places no limit* -on the extent of the -region in which the membrane stress exceeds, 1.IDS but is less than 1.1S In support of this position the."
licensee has provided~'the opinion of Dr. W.E. Cooper, a well known,:. expert on the development.o~f the ASME Code. Dr. Cooper concluded." that ."iven a desig which satisfies the..general. Code intent,_as-
.theOyster__Creek ..dryw.*elz-does-as-r.g es ina . o . a*v ola fiif 2on oa NE requirements uiir 6Suibsectaon for the miembrane ses:- i 3 . to be between 1.OS* and 1.1S, over significant distances". The' ........licensee. has also cited the provisions of IWE-3519.3 which accepts"" ..-. .
up to a 10% reduction . in the thickness . . of the original base metal-....
.: , , **
i;!4.exerc-ised. The licensee's Txe to .assure position
.that has merit,
- ?isuch *a but great position . :.s caution not must be-appltedý*i.:'*:
indiscriminately... In the case .of the Oyster Creek drywell the.'.- licensee has concluded that "there are very few locationswhere the I calculated stress intlensities for..design basis, conditions, would'i:. exceed 1,OSU, -and in these cases only slightly" (Reference7). The .
.... censeeýrh ...libbs~a . as pro led - idbe&7dditi a in .Vllnl.ifr d7n~1.ihf dK6fidn-_ i efrne 9 t: :*:--.:
support this conclusion.. . Based on the information provided .by the-
. 0..licensee which demonstrates that the use of the 1 ,1S., criteria is' limited to localized !reas, itis concludedthat the Oyster Creek,
drywell meets the intent of the ASME 'Code..
""As . -"*. discussed in Section 2. the capacity reduction factors used!, i ...in..Athe buckling analysis are. modified to take into account thei"
- . beneficial . effects o; tensile -hoop stress.. As a result: of a7
- question ".raised during ..the review -regarding this matter, the licenseesubmitted additional information in Reference 5 to support!
S¶Mi l e r the approach..-.. This iformation.included a reportprepared by.C.D.- entitled "Effects of Internal Pressure on Axial Compression Strength of. Cylinders",.;.(CB1 Technical Report No.":,022891, February'
*-19 91 ) ._._Th~e._ .r e po0ft... pr es._ented a'design equation _hich was..the lowerl bound of the test data included in the report. _It.also demonstrated, hat the equation uqed. in References 2 and 4 'was conservative.
Srelative to the propoped design equation. The report presented" further arguments that..the- rules-determined .for axially compressed . cylinders subjected to. internal pressure can be applied to spheres4. 1
-Subsequently the licensee has submitted Reference 8, which ~ ~.4 A ' : ;"
... 3 indicates that the original approach was not conservative with regar~d to. its ap~p*ication.to spherical shapes and recommends a new' eq.uation. However, "t*e *ocumentat'onsupporting- .-.- :.euaton is ndt included in Reference 8, but the *use of this.
apparently is conineda n aef7e;*ncerc6rt a-prepared'-by a C-.D. -Mi-iler entitled -E7
'IEaluation of-tabi-ty:Ana-lyss-Meth'odsA:sed for the Oyster Creek .
Drywel ,1:11 (CBt :Technical Rýort Prepared- for- GPU .. Nuc'l-ea:' R.p. Corporatilon-, Se'ptemhber 1991). Th-s~ repor was ibseqenLy submitted and reviewed by the NRC staff. As discussed in Section . 2, the use of the revised equation still results in calculated capacities in compliance with the ASME Code provisions; however,
. .themargins beyond those capacities are reduced from those reported -
by References .2 and :4. -
- .I.i.:.;: It is. noted that the licensee may have "double-counted" the i.. effects of hoop tension, since the theoretical elastic instabilit .
stress was-calculated from the finite element model using the ANSYS Code.have Thealready elastic taken instability stress the calculated may into account effects byofthe ANSYS hoop Code tensil-e . stress. " HoweVer by comparing the theoretical elastic instabilit. i*'i.:L!i**. **stressý.-.a.ndi:-tih'e.corresponding :-c rcum erentia-l--stress-pred ctfed-7by-i. " !; .
-
that the effect of hbop tension in the ANSYS calculations is small i and there is suffici6nt margin in the results to compensate for th'e U
.; *.:potenti'al "double-counting". Furthermore, it is judged that ther.e is sufficient capacity in the drywell to preclude a significant '-* .:... buckling failure under the postulated loading conditions since the ) ..- " licensee's calculations: (a) incorporate factors of safety of 1.67 to 2.0,, depending upon the load- condition, and .(b) utilize 'a S-. conservative assumption by considering the shell wall thicknessto * .-. th-be severely reduced -for the troughout the sand~ed region.
full. circumference of. the drywell
- on,-.- . ' ,- . -j V I .~ t During the course of the review-of the licensie's -6ubmittals; a number of other issues were raisedregarding the approach. These i 'included: (a) the basis and method of calculating the projected i . ,,4"drywell thicknesses,. (b). the scaling of the calculated stresses for: ...
EZ iý.X
-the nominal-thickness case by the thickness ratio, (c) the effect
[o0f.- *stress concentratons. due-: to.the change ,of thickness, (d)". z
!' I l -monitoring of the dryvell. temperature,, -(e) sensitivity of stresses .,., due to variations'in, the sand spring stiffness,:(f) sensitivity of . .
plasticity reduction the pl* factorin the buckling.analysis, (g) use . .*i-.'_1 .' m of the 2 psi desi'n. basis external pressure-" in the buckling i. . Tf , analysis, (h) effect of the. large displacement:. method, (i) th*e treatment of the large concentrated loads considered in tqe .:
.-:analysis, and (J) tie method of applying the seismic loads to the 3
pie slice model. These issues were adequately addressed by the n additional informati'onprovided-by-the-licensee-in.References -5 and----- -
- 04. "- . 5 ........
- ._-, .... '.: ,,.,. .-- -,-* ':,-'.:' * , . - ":: ** I,
-. . . .....
44 .on- u....s : ... The licens:iehfs4.iidemonstrated thiat the"calculated stresses in -
- t. he Oyser Creek drywell (both -with and without the sandbed), as,'a result of the, ostulated-loading. conditions, meet..the intent of the
-, .ASE:.Code.. for ..prp.;oecqt.,ed .-corroded- condi-tions that may exist at the 'F"-t,. ... start of the f6 _en *fuelir n -gage. Hower, if the-actual ..
thickness in the sandbed regionat 14R is close to the projected_
-thickness of 0.736-", there may-not be adequate margin left for further corrosion through continued operation unless it is demonstrated that removal of sand will completely stop further thickness reductions. The. licensee has-also demonstrated th"t there is sufficT i' -rgiiiain-i the-dreesin bth-ith'ar without the sandbed) to preclude a buckling failure under the postulated loading *conditions.
It should be recognized that the conclusions reached by the licensee have been, accepted for this particular application with due regard to.all the assumptions made in the analysis and the available margins. *' The use..of the 1.1S,0 criteria for evaluating T"Y" .. general membrane stress in corroded or degraded areas. should be_'_ investi-ated-f.
*.and -ý f&'ab -"" hb-thRC--t-f fp iatd-e-'"bq-dihd-§ -t--bli-!h f-ed'*--b~f~reii&-T i z--i'* i-dendt -ASMEC6-d--C6 "d-f :
itt*d '- and K W td -~ general use. The licensee's: buckling criteria regarding the modification of capacity reduction factors for tensile hoop stre'ss' the determination and investigated
*'i..::'"be in ta similar manner.',reduction factors should also of plasticity (I -- .
5.
*. References :.
- 1. GE Report Index' No. 9-1, "An ASME Section VIII.Evaluation ilf
....:- .. the Oyster Creek Drywell - Part 1 Stress Analysis", November - *'*:. 1990. * ... . .
- 2. GE Report Index No. 9-2, "An ASME Section VIII Evaluation *f
'the Oyster Creek Drywell - Part 2 - Stability Analysi-',' . ....... . November 1990 -- "--
S3. GE Report Indk No. 9-3, "An ASME Section VIII Evaluation Vof
* ;. the Oyster Creek Drywell for Without Sand Case - Part i Stress Analysis,",.February 1991. . is * :' ,-.*-- , ...,.-, . :i ::. " "
4... GE Report Index No. 9-4, "An ASME Section VIII Evaluation .of the Oyster Creek Drywell for Without Sand Case - Part 2*I - Stability Analysis," February 1991.
.. 5. GPU Nuclear letter dated March 20, 1991, "Oyster Creek Dryw;'ll - Containment-. -
R2 "Oyster Creek Drywe 1 0---6. GPU Nuclear letter dated June 20, 1991, nn. ".* Containment". 6
.t: i .. . . . - . .. . ....
Iti A OWL.
-2h; *-o7 ' -.,,.....':,.....,'-..-."*,'-.L,'.,--.;. ..... .. ..
- '"... .* "*
.Jo* . ,. . .. * . _.. 3 . o . . .. : . > . ...o. ...**
A..l. . -.. *... . 7,. .*".. -"CPU- 1u*e a A -date Octb..er9 d.lett-r.. 9,1991,
.. "Pyster Creek Dryiwlel coVAaLO.iJ1ifi~tn '
- 8. .PU duclear ettert dated January 16, 1992, "Oyster Creek.
Drywall Cont!ainment",-
- r. T f - - m't~
- 9. CPU. Nulear letter dted' January 17, 1992, "Oyster Creek Drywall iCotainment.. *t: >*...
V--t .~ . . '. -*.. . . . ,.: , . .: . .
-..-.. . . .-- :7-i-....: .. .. .. . .";5 ." "" . .. :,. "": - :1/:i S....I
- "-, : . ...c"'" 'T'"-- .. *' ....' "
j
.... :.. "-.-" :.. "=*. ? I* .. ." "jf k * .. "" / * .3/4I..: . . ... 1 ... ... .. . * . . ' .a... '
- 3. ~ A._ _ __A.
I .. . 2
* .I;. .:.: . ,I , .. . . .. -....... - * " ....3-.,..:.. --- ... "' S* ..
I*... " , ""
-I
{..::: . g:.: ..s' ." .3... ..- ..:. ..-
'TI. Vi."..Gt .tr'- 44G - : ....:q" -3' ;:.4 .4 .,. , ...5 .4fy. . *., : - " '
3...."" '"* "' r" I i
...:u,"-mu aumi niii IIIE!IIIE HE.. .I..
L
It OCNGS FSAR UPDATE TABLE OF CONTENTS (Continued) VOLUME 3 (Continued) Chapter Title Page 3.6C Appendix- Evaluation, of Structural Integrity of the Biological Shield Wall Under Pipe Whip Loadings 3.7 Seismic.Design 3.7-1 3.7A Appendix - Seismic Acceleration Floor Response Spectra for the Reactor
- Building 3.7B Appendix - Site Specific Response Spectra 3.7C Appendix - Earthquake Analysis of the Suppression Chamber Suction Header VOLUME 4 3.8 Design of Category I Structures 3.8-1 3.9 Mechanical Systems and Components 3.9-1 3.10 Seismic Qualification of Seismic Category I Instrumentation and Electrical 3.10-1 Equipment 3.11 Environmental Design of Instrumentation and Electrical Equipment 3.11-1 4 REACTOR 4.1 Summary Description 4.1-1 4.2 Fuel System Design 4.2-1 4.3. Nuclear Design. 4.3-I 4.4 Thermal and Hydraulic Design 4.4-1 4.5 Reactor Materials 4.5-1 4.6 Functional Design of Reactivity ContrOl Systems 4.6-1 nl.,
Rev. 13 04/03
OCNGS FSAR UPDATE 3.8 DESIGN OF CATEGORY I STRUCTURES The General Electric Company was the prime contractor for.Jersey Central Power and Light Co. in the design and construction of the Oyster Creek Nuclear. Generating Station (OCNGS). Thus, General Electric had the overall responsibility for the Containment System as a part of the total plant. General Electric Company engaged the services of Burns & Roe,. Inc. for engineering assistance and construction*management. General Electric furnished the conceptual information drawings, design criteria, and design specifications. Burns & Roe was responsible for the detailed design, construction drawings, specifications, and management of the actual construction and installation. All Burns&. Roe drawing information was supplied to General Electric who had the privilege of review:and approval. Burns & Roe, Inc., subcontracted the design, construction, and testing of the drywell and torus vessel, and vent system work to Chicago Bridge & Iron Company. Subsequent to the initial design and the start of commercial operation, certain modifications were made to the torus under the Mark I Containment System Evaluation Program. This program is further discussed in Subsection 3.8.2. Evaluations of the structural soundness of the Drywell were performed during 1986 and 1987. The results of these evaluations showed evidence of Drywell wall thinning at various locations. These evaluations, the results thereof, and mitigative measures, as applicable, are discussed in Section 3.8.2.8. In addition, under the Systematic Evaluation Program (SEP), and independent review was conducted of the seismic design aspects of the OCNGS as they relate to overall design margins. The report "Seismic Review of the Oyster Creek Nuclear Power Plant as Part of the Systematic Evaluation Program", NUREG/CR-1981, UCRL-53018, RD, RM, was issued to summarize the evaluation program. The SEP is summarized in Section 1.10. 3.8.1 Concrete Containment Not applicable 3.8.2 Steel Containment The Function of the Primary Containment System is to accommodate, with minimum leakage, the pressures and temperatures resulting from the break of any enclosed process pipe, and thereby limit the release of radioactive fission products to values which will insure offsite dose rates well below 10CFR100 guideline limits. The design integrated leak rate for the system is no greater than 0.5 percent of its total volume per day at 35 psig. 3.8-1 Update 7 12/92
OCNGS FSAR UPDATE The development, design, fabrication and construction of the OCNGS Primary Containment are discussed in detail in Reference 1. For the design and construction of the Primary Containment, 3 Bums*& Roe prepared a detailed design specification and bid package from design criteria information supplied: by; General Electric. Chicago Bridge & Iron assumed responsibility for providingthe primary components of the Containment System. All design and construction I drawings were submitted to Burns &Roe .for approval and to General Electric for review prior to construction. Included in this package were openings and sleeves (nozzles) through the drywell wall to accommodate the. penetration of process piping, instrumentation, and electrical lines. The I actual penetration line fixtures and seals design, fabrication, and testing was subcontracted by Bums & Roe to piping or-electrical fabricators as appropriate. i Subsequent to the design. completion and start of commercial operation, additional loading conditions which arise in the functioning of the, pressure suppression concept utilized in the Mark I Containment System design were identified. These additional loading conditions resulted in an industry wide reanalysis and modification program which is briefly described in the following paragraphs. . 1 Mark I Containment System Evaluation Program
Background
The original design of the Mark. I Containment System considered postulated accident loads '* previously associated with clontainment design. These included pressure and temperature loads associated with a Loss-of-Coolant Accident (LOCA), seismic loads, dead loads, jet impingement loads, and hydrostatic loads due to water in the suppression chamber. However,.after establishment of the original design criteria, additional loading conditions which arise in the functioning of the pressure suppression concept utilized in the Mark I Containment System design were identified. These additional loads resulted from dynamic effects of drywell air and steam being rapidly forced into the suppression pool (torus) during a postulated LOCA and from suppression pool response to safety relief valve (SRV) operation generally associated with plant transient conditions. I Because these hydrodynamic loads had not been considered in the original design of the Mark I containment, the Nuclear Regulatory Commission (NRC) required that a detailed reevaluation of the Mark I containment system be made. In February and April 1975, the NRC transmitted letters to all utilities owning BWR facilities with the Mark I containment system design, requesting that the owners quantify the hydrodynamicloads and assess the effect of these loads on the containment structure. The February 1975 letters reflected NRC concerns about the dynamic loads from SRV discharges, while the April 1975 letters indicated the need to evaluate the containment response to the newly identified dynamic loads associated with a postulated .design basis LOCA. 3.8-2 1 Update 7 12/92 .3
!
OCNGS FSAR UPDATE As a result of these letters from the NRC, and recognizing that the additional evaluation effort would be very similar for all Mark I BWR plants, the affected utilities formed an "ad hoc" Mark I Owners Group, and GE was designated as the Group's lead technical organization. The objectives of the Group were.to determine the magnitude and significance of these dynamic loads as quickly as possible and to identify courses of action needed to resolve any outstanding safety concerns. The Mark I Owners Group divided this task into two programs: a Short Term Program (STP) and a LongTerm Program (LTP). Short Term Program The objectives of the Short Term Program .(STP).were to verify that each Mark I Containment System would maintain its integrity and functional capability when subjected to the most probable loads induced by a postulated design basis LOCA,. and to verify that the licensed Mark I BWR facilities could continue to operate safely without endangering the health and safety of the public while a methodical,.comprehensive Long Term Program (LTP) was being conducted. The STP structural acceptance criteria used to evaluate the design of the torus and related structures were based on providing adequate margins of safety; i.e., a safety to failure factor of 2, to justify continued operation of the plant before the more detailed results of the LTP were available. The results of the Short Term Program evaluation of the Oyster Creek torus were submitted to the NRC by Jersey Central Power and Light in 1976. As a part of that program, a drywell to wetwell differential pressure was imposed to reduce LOCA loads and a quencher was installed on the SRV discharge line to reduce SRV discharge transient induced loads. The conclusion of the Short Term Program evaluation was that the Oyster* Creek torus met the criteria established for the Short Term Program. The NRC concluded that a sufficient margin of safety had been demonstrated to assure the functional performance of the containment system and, therefore, any undue risk to the health.and safety of the public was precluded. These conclusions were documented in the "Mark I Containment Short Term Program Safety Evaluation Report," NUREG-0408, dated December 1977. The NRC granted the operating Mark I facilities an exemption relating to the structural factor of safety requirements of 10CFR50.55(a) for an interim period while the more comprehensive LTP was being conducted. 3.8-3 Update 7 12/92
OCNGS FSAR UPDATE Long Term Program The objectives of the Long Term Program .(LTP) were to establish conservative design basis loads that are appropriate for the anticipated life of each Mark I BWR facility (40 years), and to restore the originally intended design safety margins for each Mark I Containment System. The plans for the LTP and the progress and results of the program were reviewed with the NRC throughout the performance of the program. The LTP consisted of:
- a. The definition of loads for suppression pool hydrodynamic events
- b. The definition of structural assessment techniques.
- c. The performance of a plant unique analysis (PUA) for each Mark I facility Thegeneric aspects of the' Mark I Owners Group LTP Were completed with the submittal of the "Mark I ContainmentProgram Structural: Acceptance Criteria, Plant Unique Analysis Application Guide" (PUAAG), NEDO-24583-1. The:NRC concluded that load, definitions and structural acceptance criteria documented in these two reports were acceptable for use in the plant-unique analysis of each plant. The NRC'conclusions and comments were presented in the "Mark I Containment Long Term Program Safety Evaluation Report", NUREG'0661, dated July 1980.
Summary of Results The analysis of the Oyster Creek torus and vent system has been performed in conformance with the requirements. of the Mark IContainment Long Term Program. As a result, a number of structural modifications were designed for installation in the OCNGS Primary Containment as part of the Long Term Program. The results of the analysis, which assumed that the modifications were completed, show that all components of the torus and vent system meet the criteria of the Mark I Long Term Program. Thus, the functional performance of the OCNGS Containment System will be assured for both Loss-of-Coolant Accidents (LOCA) and Safety Relief Valve (SRV) discharge suppression pool hydrodynamic loading conditions. Specific results of the analysis are given in the report "Plant-Unique Analysis Report, Suppression Chamber and Vent System", MPR-733 dated August 1982. No evaluation of the Oyster Creek drywell was required in the Mark I Containment Long Term Program, since the maximum drywell pressure specified for Oyster Creek in the Long Term Program (NEDO-24572 Rev 2) is Well within the design value specified in the original containment design. 3.8-4 Update 7 12/92 I
Oyster Creek Nuclear Station FSAR Update The analysis of the piping systems attached to the Oyster Creek torus and vent system has been completed in conformance With the requirements of the Mark I Containment Long Term Program. A number of piping and pipe support structural modifications were designed for installation as
,part of the Long Term Program. The analyses are based on the piping arrangement with all modifications installed. The loads used in the.analyses of the piping are based upon the response of the Oyster Creek Containment modified.as described in the report "Plant-Unique Analysis Report, Suppression Chamber and Vent System", MPR-733, dated 'August ".1982.
The-results of the analyses of piping systems attached to the Oyster Creek torus and vent system <.show that all piping, pipe hangers and supports, nozzles and related components meet the criteria of the Mark I Containment Long Term Program with the modifications completed. Specific results of the analyses. are given in the report "Plant Unique Analysis Report, Torus Attached Piping", MPR-734, dated August 1982. These results were updated in MPR-999, Revision 3, "Addendum to MPR-734." (Reference 41). An evaluation of the nozzles in the vent system for the Electromatic Relief Valves piping penetrations has been performed. The results, as presented in the report MPR-772, "Plant Unique Analysis Supplemental Report," indicate that all stresses are below ASME Code allowables and therefore, the penetrations meet. the requirements of the Mark I Containment Long Term Program. The Mark I Containment'Long Term Program Confirmation Order dated January 19, 1982 required plant modifications needed to comply with the Acceptance Criteria in Appendix A of NUREG-006 1, Mark.I Containment Long Term Program, dated July 1980. This program is now complete for OCNGS. Subsequent to the completion of this Mark I Containment Long Term Program, the high pressure actuation setpoints, specified by the Technical Specifications, were increased by. 15 psig (Reference 45). To support this increase, an evaluation of the impact of the increased setpoints on Mark I results was completed (Reference 46). This evaluation utilized an estimation of, not a determination of, the resulting increases in stress levels. The: results of this estimation were accepted as sufficient bases for assessing theimpact of the setpoint increase on previously determined Mark I long term results. 3.8.2.1 Description of the Containment The Primary Containment consists of a pressure suppression system with two large chambers as shown in Figure 3.8-1. The drywell houses the reactor vessel,.the reactor coolant recirculating loops, and other components associated with the reactor system. It is a 70 ft diameter spherical steel shell with a 33 ft diameter by 23 ft high cylindrical steel shell extending from the top. 3.8-5 Update 10 04/97
Oyster Creek Nuclear Station FSAR Update Thepressure absorption chamber* is a steel shell in the shape of a torus located below and around the I base of the drywell. It has a major diameter of 101 ft, a chamber diameter of 30 ft, and is filled to approximately 12 ft depth with demineralized water. The structure is made up of 20 mitered wedge shaped sections or bays with internal stiffening rings or ring girders at each miter. The two chambers are interconnected through 10 vent pipes 6 ft 6 in- in diameter equally spaced around the circumference of the pressure absorption chamber which feed into a common header inside the pressure absorption chamber. This header also takes the shape of a torus of 101 ft major diameter by 4 ft 7 in minor diameter. Thereare 120 downcomer pipes, 2 ft in diameter, uniformly spaced which have their open ends extending 3 ft below the minimumwater level in the pressure absorption chamber. Gas phase return lines with vacuum breaker valves feed back gas to the drywell in case its pressure is less than the absorption chamber. " The base of the drywell is supported on a concrete pedestal conforming to the curvature of the vessel. For erection purposes a structural steel skirt was first provided supporting the vessel. A portion of the steel skirt was left in place to serve as one of the shear rings intended to prevent rotation of the drywell during I an earthquake. After erection, concrete:was poured uptothe level of the vessel. floor providing, uniformity in the support by following the contour of the drywell vessel. A three inch clearance has been providedbetween the steel vessel of the drywelland the concrete drywell shield wall toprovide for a regulated expansion of the drywell steel shell. This clearance was achieved by applying a compressible material to the outside of the drywell vessel prior to placement of the shield wall concrete. For further detail refer to Subsection .3.8.2.4. 1 The vent header is supported by pinned columns inside the absorption chamber. The downcomers are connected in pairs by pinned braces. 1 i I the pressure absorption chamber is identified often in various reference documents, drawings, and figures as suppression chamber, wetwell, or torus. I 3.8-6 1 Update 7 12/92 3 I
OCNGS FSAR UPDATE Projecting downward from the vent pipe header are downcomer pipes, terminating below the. water surface of the pool. During a Loss-of-Coolant Accident (LOCA), the upward reaction from the downcomers. is resisted by columns to the bottom of the absorption chamber. Due to the vent clearing jet forces thecolumns are pinned top and -bottom to accommodate the differential horizontal movement between the header and the pressure absorption chamber. The horizontal reaction from the downcomers is resisted by the pinned braces. Jet deflectors are provided in the drywell at theentrance of each vent pipe to prevent possible damage to them from jet forces which might accompany a pipe break in the drywell. Access to the pressure absorption chamber from the-Reactor Building is provided through two manholes with double gasketed bolted covers which can be tested for leakage. Access to the drywell is provided through the equipment hatch and personnel air lock and through the double gasketed drywell head cover, all of which have provisions for being. individually leak tested. The pressure absorption chamber is supported on columns located on the outer and inner radii of the torus atthe miters. At the center of each bay, a sliding saddle is provided to. support the torus, resist upward forces caused by a LOCA, and allow for thermal expansion of the chamber. The outer columns were pinned at the bottom and the inner columns are pinned at the top and bottom to allow radial growth. of the absorption chamber due to temperature and pressure changes. Support for horizontal forces and lateral stability is provided by cross bracing between the outer support columns. Additional details on the Containment System penetrations andon the equipment hatch and personnel air lock are presented in Subsection.3.8.2.4. The Appendicesto Reference I provide details and dimensions of these penetrations and the personnel air lock. General arrangement drawings showing the relationship of the Containment System to the surrounding structures are presented as Drawings 3E-153-02-001 through 009. Overall dimensions and volumes of the Containment System are given in Table 3.8-L. 3.8.2.2 ApplicableCodes, Standards and Specifications The design,. materials, fabrication, construction and inspection of the Containment System conform to, but are not necessarily limited to, the applicable sections of the following codes and specifications which are used to establish or implement design bases and methods, analytical techniques, material properties, construction techniques and quality control provisions. 3.8-7 Update 9 06/95
OCNGS FSAR UPDATE Other tests and standards identified by the lead documents listed and in effect or promulgated at the time I the design Or construction was performed, shall also be considered as viable controlling documents. The design and construction of the Containment System involved two. basic stages: Original Construction (Basic Design). Subsequent Design Modification Codes, standards and specifications are presented in the.following paragraphs relative to these two stages. Original Construction (Basic Design) " .
- a. American Society of Mechanical Engineers Boiler and::Pressure Vessel Code, Sections VIII and IX, latest edition at thetime of design, with all applicable addenda; nuclear case interpretation 1270 N-5, 1271. N,.1272 N-5 and other applicable case interpretations.
Boiler and Pressure Vessel Code,: Section II, latest edition at the-time of design with all applicableaddenda, forthe following material specifications: SA-201 Carbon-Silicon Steel Plates of Intermediate Tensile Ranges forFusion-Welded Boilers and Other Pressure Vessels SA-212 High Tensile Strength Carbon-Silicon Steel Plates for Boilers and Other Pressure Vessels SA-300 Steel Plates for Pressure Vessels for Service at Low Temperature SA-333 Seamless and Welded Steel Pipe for Low Temperature Service SA-350 Forged or Rolled.Carbon and Alloy Steel Flanges, Forged Fittings, and Valves and Parts for Low Temperature Service I 3.8-8. Update 7 12/92
OCNGS FSAR UPDATE
- b. American Society forTesting and Materials Standards A36 Structural Steel A193 Specification for Alloy Steel and Stainless Steel Bolting Material for High Temperature Service A307 Specification for Low Carbon Steel Externally and Internally Threaded Standard Fasteners
- c. American Institute of Steel Construction Specification for the design, fabrication and erection of structural steel for buildings.
- d. Federal Specifications TT-P-86c Paint; Red-Lead Base, Ready Mixed
- e. Steel Structures Painting Council Specifications SSPC-SP-3 Power Tool Cleaning SSPC-SP-6 Commercial Blast Cleaning
- f. State of New Jersey Laws, Rules and Regulations
- g. Bums & Roe Specifications S-2299-4 Design, Furnishing, Erection and Testing of the Reactor Drywell and Suppression Chamber Containment Vessels Design Modification Modifications subsequent to the basic Containment System design and construction have transpired over a number of years after being initiated in 1975. As such, numerous codes and code revisions have been utilized in carrying out the design and construction efforts.
The following codes, standards and specifications have been supplied to indicate the basic nature of the documents being employed. Specific information relative to actual governing documents used, must be obtained from the individual modification's "System Design Description" for the.Oyster Creek plant. 3.8-9 Update 7 12/92
I OCNGS FSAR UPDATE
- a. American Society of Mechanical Engineers 3 ASME Boiler and Pressure Vessel Code, Section III, Subsection NE," Class MC Components," (1977 Edition through Summer 1977 Addenda). 3 ASME Boiler and Pressure Vessel Code, Section XI, "Rules for Inservice Inspection of Nuclear Power Plant Components," Division 1, (1977 Edition through Summer 1978 Addenda).
ASME Boiler and Pressure Vessel Code, Section II, "Material Specifications," (1977 Edition through Summer 1978 Addenda). ASME Boiler and Pressure Vessel Code, Section III, Subsection NF, "Component Supports," (1977 Edition through Summer 1977 Addenda).
- b. American Concrete Institute 3 ACI 349-76, "Code Requirements for Nuclear Safety-Related Concrete Structures,"
(through 1979 Supplement). 3 3.8.2.3 Load and Loading Combinations. The Primary Containment is designed to..withstand all credible conditions of loading, including preoperational test loads, normal loads, severe environmental loads, extreme environmental loads, and I abnormal, loads. These loads are considered in the applicable load combinations to assure that the 3 response of the structure will remain within the design limits prescribed in Subsection 3.8.2.5. The. loads and load combinations provided below are extracted from Reference 1. Loads and load combinations relative to the modifications implemented after start of commercial operation are contained in References 2 through 11. I I I I 3.8-10 i Update 7 12/92 3 I
OCNGS FSAR UPDATE
- a. Design Loadings The loadings considered in the design of the drywell, absorption chamber and interconnecting elements include:
lloads caused by temperature and internal or external. pressure conditions.
- Gravity loads from the Vessels, appurtenances and equipment supports.
- Horizontal and vertical seismic loads acting onthe structures.
- Live loads.
- Vent thrusts.
- Jet forces on downcomer pipes.
- Water loadings under normal and flooding conditions.
The weight of contained gas in the vessels.
- The effect of unrelieved deflection under temporary concrete. loads during construction.
- Restraint due to compressible material.
Wind loads on the structures during erection.
- b.
Description:
of Loads
- 1. Pressures and Temperatures Under Normal Operating Conditions During reactor operation the vessels will be subjected to-temperatures up to 150'F at close to atmospheric pressure. The absorption chamber will also be subject to .the loads associated with the storage of up to 91,000 cubic feet of water distributed uniformly within the vessel.
3.8-11 Update 7 12/92
OCNGS FSAR UPDATE .2. Pressures and. Temperatures Under Accident Conditions The drywell and the vent system are.designed for an internal pressure of 44 psig coincident withia temperature of 292°F and for an internal pressure of 35 psig coincident with a temperature of 281°F. The 35 psig and 281*F have been-considered to prevail for a period of 4 to .5days as a design
.condition.. The absorption chamber is designed for an internal pressure of .35 psig coincident with the loads associated with the storage of absorption pool. water increased in volume up to 91,000 cubic feet and a temperature of 150 0F.
- 3. Jet Forces The drywell shell, and closure head. are designed to withstand jet forces of the following magnitudes in the locations indicated from any direction within the drywell: 5 Location Jet Force (Max.) Interior Area Subjected to Jet Force 5 Spherical PartofDrywell 566,000 pounds 3.1*4 square feet.
Cylinder and Sphere to Cylinder Transition 466,000 pounds 2.54 square feet U Closure Head 16,000 pounds 0.09 square feet These jet forces consist of steam and/or water at 300'F maximum in the impingement area. The jet forces do not occur simultaneously. However, a jet force is considered to occur coincident with internal design pressure and a temperature of 150'F. 3 U I I 3.8-12 I Update 9 06/95 3 I
OCNGS FSAR UPDATE The spherical and cylindrical parts of the drywell are backed up by reinforced concrete with a layer of compressible material and an air gap between the outside of the drywell and the concrete to allow for thermal expansion. It is assumed that local yielding will take place, but it has been established that a rupture will not occur. This assumption is discussed more fully in Section 111-2.4 of Reference 1. Where the shell is not backed up by concrete (closure head), the primary stresses resulting from the combination of loads previously defined does not exceed 0.9 times the yield point of the material at temperature. However, the primary plus the secondary stresses are limited to three times the allowable stress values given, in Table UCS-23, Section VIII, ASME Boiler and Pressure Vessel Code. Supporting data is available in the report, "Loads on Spherical Shells", prepared by CB&I following a series of load
*testson sphericalplates. This~report is included as an Appendix in Reference 1.
The absorption chamber and vent system are designed to withstand jet force reactions associated with the design .basis LOCA. The design reaction on each 24 inch diameter downcomer pipe is 21,000 pounds. Stresses resulting from these reactions are limited to ASME Code allowables.
- 4. Gravity Loadsto be Applied to the Drywell Vessel
- The weightofthe steel shell, jet deflectors, vents and other appurtenances.
Loads from structural members used to support equipment. An allowance for the weight of the compressible material applied to the exterior of the vessel and as described in the B&R, Inc. report
."Expansion of the Drywell Containment Vessel", which is included as an Appendix in Reference 1.
The live load on.the access opening: 11 tons or 150 pounds per square foot,. whichever is more severe. The live load for the depth of water on the water seal at the top flange of the drywell with the drywell hemispherical head removed. The weight of contained gas during the tests. 3.8-13 Update 7 12/92
OCNGS FSAR UPDATE Dead and live loads, on the welding pads provided on the inside of the containment sphere shoulders, spaced at 8 foot centers in each direction. 3 Permanent loads are 200 pounds on each pad, with 800 pounds of live load on any twoadjacent pads. A temporary load due to the pressure of fluid concrete which was placed directly against.the compressible material attached to the exterior of the I drywell and vents. The fluid concrete pressure was controlled by limiting
- the rate of placement per hour in order to have a pressure limit of 3 psi on
.5. the compressible material. Gravity Loads to be Applied to the Absorption Chamber I The weight of the steel. shell including catwalk, vent header, downcomer pipes and other shell appurtenances. The absorption pool water stored in the vessel as specified above.
- The weight of contained air during the tests. .
- 6. *Lateral Load The drywell vessel which was exposed above grade, prior to construction of the
*Reactor Building, was designed to withstand wind loads on the projected area of the circular shape in.accordance with the height zones listed below. These loads .
were analyzed in combination with other loads applicable during this stage, with stresses limited to 133 percent of.the ASME allowable stresses. Height Above Grade in Feet Wind Load in Pounds per Sq. Foot 0-30 15 3 30-50 18 over 50 24 The effects of the lateral loads at the blanked off vessel penetrations were
- investigated.
I 3.8-14 I Update 7 12/92 3 I
OCNGS FSAR UPDATE
- 7. Seismic Loads A lateral static coefficient equal to 22 percent, and a vertical static coefficient equal to 10 percent, of the permanent gravity load was assumed as acting simultaneously with each other.
This load was taken concurrently with permanent gravity loads, accident.pressure conditionsand other lateral loads as shown in Figures 3.8-4 and 3.8-5. These values were based on studies and criteria described in Section 2.5. The static coefficients listed were used by CB&I to-develop the design of the drywell and absorption chamber. After completion of this design and fabrication of the vessels, John A. Blume & Associates were engaged by G.E.to perform a dynamic analysis of the structure under seismic conditions. The complete analysis performed by Blume has been included in Appendix 111-2.4 (Item 3) in Reference
- 1. The results of these calculations list coefficients equal to those utilized by CB&I in their calculations, corroborating the adequacy of the seismic design performed by CB&I.
- c. Loading Combinations Used in the Basic Design of the Drywell and Vent System 1v .. Case i - Initial Test Condition at Ambient Temperature at Time of Test
- Gravity load of vessel and appurtenances
- Design pressure
- The weight of contained air
- Lateral load due to wind or seismic forces whichever is more severe
- Vent thrusts
- Vertical seismic load 3.8-15 Update 7 12/92
OCNGS FSAR UPDATE
- 2. Case II - Final Test Condition at Ambient Temperature at Time of Test
- Gravity load of vessel and appurtenances 3
*" Gravity load from equipment..supports I .* .Gravity load of compressible material.
- Gravity load.of welding pads
- Design pressure I Seismic loads.
*Effect of unrelieved deflection under temporary concrete load
- Restraint dueto compressible material I
- Vent Thrusts.
- 3. Case III - Normal Operating Condition at Operating Temperature Range of 50'F to 150OF
-o Gravity load of vessel and appurtenances
- Gravity load from equipment supports 3 Gravity load of compressible material
- Seismic loads I Vent thrusts .
Restraint due to compressible material
- Gravity load on welding pads I Effect of unrelieved deflection under temporary concrete load 1 External pressure of 2 psig
- Live load on personnel air lock I 3.8-16 I Update 7 12/92 3 I
OCNGS FSAR UPDATE
- 4. Case IV - Refueling Condition with Drywell Hemispherical Head Removed, at Operating Temperature Range of 50'F to 150°F Gravity load of vessel and appurtenances
*
- Gravity load from equipment supports
* .Gravity load of compressible material
- Gravity and live load on welding pads
.o Water load on water seal at top flange of drywell
- Seismic loads
* "Effect of unrelieved deflection under temporary concrete load
- Restraint due to compressible material
- Vent thrusts
- External pressure of 2 psig
- Live load on access opening 5.. Case V-Accident Condition at Temperature Listed Below
*
- Gravity load of vessel and appurtenances Gravity load from equipment supports Gravity load of compressible material Gravity load on welding pads Seismic loads Design Pressure: Maximum positive pressure of 44 psigat 292°F decaying to 35 psig at maximum temperature at 281°F, to maximum negative pressure of 2 psig at 205'F.
Effect of unrelieved defl8ection under temporary concrete load Restraint due to compressible material Vent thrusts Jet forces 3.8-17 Update 9 06/95
OCNGS FSAR UPDATE
- d. Load Combinations Used in the Basic*Design of the Absorption Chamber
- 1. Case I - Initial and Final Test Condition at Ambient Temperature at Time of Test, Gravity load of vessel and appurtenances
. Absorption pool at the operating maximum of 91,000 cubic feet of water Seismic loads Design pressure * *Vent thrusts
- 2. Casei1 - Temporary Condition at Ambient Temperature During Construction
* *Gravity load of vessel and appurtenances * *Seismic loads
- 3. Case III - Normal Operating Condition at-Operating Temperature Range of 50'F to 1501F
- Gravity load of vessel and appurtenances Absorption pool at the operating minimum of 82,000 cubic feet of water
- Seismic loads
** Vent thrusts
- 4. Case IV - Accident Condition at 150'F Maximum Gravity load of vessel and appurtenances Absorption pool at the operating maximum of 91,000 cubic feet of water 3.8-18 Update 7 12/92
OCNGS FSAR UPDATE
- Seismic loads
- Design pressure of 35 psig
- Vent thrusts
- Jet forces on downcomer pipes 3.8.2.4 Design and Analysis Procedures The design and *analysis procedures described herein are those presented in Reference 1.
Subsequent to the initial design, certain modifications were made to Primary Containment penetrations. The original design, modifications and analyses related to them are discussed in Subsection 3.8.2.4.3. 3.8.2.4.1 Drywell Primary Membrane Stresses The membrane stresses are based on the assumption that the thin shell resists the imposed loads
- by direct stress only. In addition, for earthquake design, it has been assumed that the shell as a free standing circular cantilever beam of variable cross section. Stresses have been computed at various points along the vertical axis of the drywell as shown on Figures 3.8-6 and 3.8-7. The notations adopted in these calculations are defined as follows:
T, = Latitudinal force in pounds per inch of meridional arc length T2 = Meridional force in pounds per inch of arc length S ,S 2 = Unit stresses corresponding to T, and T2 and are equal to T1 or T2 divided by t W = Total gravity load above the plane, in pounds P = Internal or external pressure in lbs/in2 . R = Radius of the cylinder or sphere as applicable, in inches t = Plate thickness in inches q = Vertical angle between vertical axis and point in the shell being computed 3.8-19 Update 7 12/92
OCNGS FSAR UPDATE The internal force per unit width is computed from the following relationships: I Cylindrical Portionof Drywell: T, PR and T2 = PR/2 for internal or external pressure I T- W/2 p R for gravity loads I T2= -T, = Meq/S for earthquake loads T2 Mw/S for wind loads where Meq and Mw are the moments due to earthquake and wind, respectively, and S is the Section Modulus of the Section. Spherical Portion of the .Drywell: 3 T= T2 PR/2 for internal or external pressure T21= -W/2 p R sin 2q ; T1 = -PRcos q -T 2 for gravity loads I T2= T = Meq/ p R2(sin 3q) for earthquake load 3 T2= T1 = Mw/ p R2(sin jq). for wind load I I I I 3.8-20 3 Update 7 12/92 m
OCNGS FSAR UPDATE Load Deflection Tests Design pressure for the drywell requires a relatively thin walled steel vessel. However, the vessel has relatively little capability to resist concentrated jet forces. Such loads are, however, readily accepted by the massive concrete shield which surrounds the vessel. Accordingly, thespace betweenthe steel drywell vessel and the concrete shield outside has to be sufficiently small so that, although local yielding of the steel vessel can occur underconcentrated forces, yieldingto the extent causing rupture will be prevented. Space has been provided to allow the drywell to expand when in its stressed condition in order for it to function as a pressure vessel. In addition, the vessel is subject to thermal expansion due to exposure to operating and possible accident temperatures which are significantly higher than ambient. In order to investigate whether or not a steel shell could deflect up to three inches locally without failure as a result of a concentrated load, CB & I conducted a series of tests on a steel plate formed to simulate a portion of the drywell vessel. The tests also provided data on loading required to produce a given deflection, and the strain at various points of the shell.. In. performing these tests, it was assumed that permanent deformation is not considered as failure, The basic test section was designed and fabricated to simulate a 70 foot diameter sphere. The materialand plate thickness used were typical of the type used in pressure suppression containment system applications. By modifying the basic sectionthrough the addition of an 18 inch diameter fitting with insert type reinforcing, a typical penetration was simulated. Again.by the removal of the insert type fitting and the insertion of an 18 inch diameter fitting with pad type reinforcing, another typical penetration was simulated. Step by step procedures, description of the tests, as well as load deflection and load strain curves are included in the CB & I report "Loads on Spherical Shells" in Appendix 111-2.4 (Item 2) of Reference 1. The results of these tests indicate that spherical steel shellsof this diameter and thickness, as well as fittings with insert type reinforcing locatedin a spherical steel shell are capable, under concentrated loading, of withstanding a substantial localized deflection without failure* Graphs of the theoretical radial strain in the shell, calculated assuming the shell to be a membrane, are included in this report. They indicate that the experimental data conforms rather well to the theoretical values. This confirms that the shell was acting in close conformity to the approximate theoretical mode. 3.8-21 Update 7 12/92
OCNGS FSAR UPDATE Expansion of the Drywell Containment Vessel The load deflection. tests performed by.CB&I on steel. plates provided the basis for selecting three inches~as the maximum acceptable space between the cold drywell shell and the biological concrete shield which surrounds it. The three inch space precludes the use of a conventional forming system .forthe inner face of the concrete shield. The approach taken was to fill. the space permanently with a.material having sufficient compressibility to permit the. expectedvessel movement and yet be rigid enough so as not to deform under the fluid pressure of concrete. This pressure can be controlled by limiting the rate of placement of the concrete. To eliminatethe need for a continuous internal, pressure in order to prevent compressive forces on the vessel, aninelasticcompressible material was selected; such a material can be permanently compressed once by simulating the conditions causing the greatest vessel expansion. The residual .air gap created by the inelastic compression of:the material will then offer no.resistance to. subsequent repetitions of vessel expansion. After careful consideration,.testing, and investigations as tothe type of material to-be utilized, an asbestos fiber magnesite cement.product was selected. .To determine the required minimum thickness of the material, it was necessary to establish the extent to which it was compressed. This was determined bythe expansion of the vessel associated with its highest postulated temperature for any future operating or accident condition, and by the procedure planned for expanding the vessel to create an.air gap larger than required to accommodate any future conditions. Information and discussions pertaining. to the performance, design and analysis aspects of the inelastic compressible material is given in Subsection 3.8.2.4.3. An internal pressure of 35.psig (saturated steam pressure at a temperature of281°F) resulted in an expansion which exceeded postulated accident or operating expansion, and hence, was a criterion for determining spacing dimensions. I 3.8-22 I Update 7 12/92 I I
OCNGS FSAR UPDATE At the most critical location, the point on the sphere most distant from the bottom embedment, thermal expansion was expected to be about 1.06 inches. Tests on the spacing material to measurethe pressure required to reduce its thickness by this amount, and also taking into account the compression resulting from the fluid concrete pressure before setting, indicated an initial thickness requirement of about2 1/2 inches. The design pressure transmitted to the concrete shield wall by the spacing material during initial expansion of the vessel would be 20 psi, which is tolerable fronh the standpoint of the concrete strength. Some tolerance on thickness of the compressible material had'to be allowed. A workable limit of l/4 inch was chosen. Since the design pressure on the wall assumed 2 1/2 inches minimum, thickness of 2 3/4 inches +/-1/4 inch was specified. In considering theacceptability of the three inch gap as a maximum between the steel vessel and the concrete shield, it should benoted that this distance would be reduced by: the compression of the material tinder the fluid concrete pressure; the thermal expansion of the vessel in going from ambient temperature during construction to an operating temperature at which the design accident might occur; and the fullycompressed thicknessof the material. These conditions were expected to reduce the three inches to well below the 3.125 inch minimum failure deflectionof the CB&I jet load simulation tests, particularly in viewof the conservative approach used in those tests. It was thus concluded that a gap of three inches between the drywell vessel and the biological concrete shield would be satisfactory.. The construction schedule required that the compressible material be applied to the exterior of the vesselprior to theconstruction of the concrete shield wail. The mixing and foam injection, as well as the application procedure for the compressible material to the vessel was performed in accordance with that developed by the manufacturer, All Purpose Fireproofing Corp. Thematerial was built up in three coats to make a total thickness of 2 3/4 inches +/-1/4 inch for the upper hemisphere. Since the lower hemisphere of the cylindrical section will have less total expansion, 2 1/2 inches +/-1/4 inch of the compressible material was applied over their surfaces. A polyethylene sheet reinforced with glass fibers was used to prevent bonding
- ofthe spacing material and the concrete. The actual application was completed in about two weeks.
After completion of the material application, any damages noted were repaired. Testing and inspection services were provided to assurethat the quality and workmanship were as required. 3.8-23 Update 7 12/92
OCNGS FSAR UPDATE After the biological concrete shield wall was .poured against the compressible material and cured, the vesselwas prepared .for the expansion operation. Expansion of the vessel was accomplished by
,pressurizing with heated air by means of portable compressors, electric duct heaters and fans placed at various locations within:the vessel. I A temperature recorder was.used to monitor temperature. Several of the existing vessel, penetrations, consisting of pipeswelded into the vessel and extending out. through.the concrete shield wall through sleeves, were used to monitor vessel, expansion.
The expansion operation was conducted as planned, and pressure, temperature and expansion recorded throughout the procedure The concrete shield wall exterior was examined periodically and particularly at maximum temperature andpressure; no evidence of distress was observed.: An
*inspection.of the interior of the drywell immediately after the expansion operation; and again some 12 *hourslater gave no evidence of distress. The maximum displacement recorded during expansion was 0.61 inches which was less than thetime temperature performance value calculated by computer program *method.., This measurement together with the favorable results of the.examination of the shieldwall and drywell vessel.interior corroborated the.assumptions made in the drywell design.
Complete step by step procedures, initial criteria and conclusions drawn from this expansion procedure are included in. the B&R, Inc. report "Expansion of the Drywell Containment Vessel" in Appendix 111-2.4 (Item 1) of Reference 1. See also Subsection 3.8.2.4.3. Maximum Primary Membrane Stresses in the.Shell The maximum primary. membrane stresses in the shell result from the following combination of loads.
- Internal pressure of 44 psig, dead load.of the shell and appurtenances lateral and vertical seismic loads,.
gravity load on welding .pads and gravity load of the compressible material. The internal pressure load causes by farthe greatest stress. Themaximum stress is 1.9,200 psi which is less than that allowed by the code. It occurs in the cylindrical portion of the drywell.. Other stresses computed at other points along the drywell are lower i in .magnitude. In addition to maximum stresses computed for the cylindrical and spherical portions of the drywell, stresses have been computed on the elliptical head of the vessel taking into account the effect ofjet
.forces since this portion of the vessel is not backed up by concrete. The maximum stress on the head and been found to be 29,340 psi and it results from jet forces combined with an internal pressure of 44 psig. The design specificationallowance for this loading combination is 31,500 psi.
3.8-24 Update 9 I 06/95 I I
OCNGS FSAR UPDATE Sincethe personnel and equipment hatch had no concrete backing to take the effect ofjet forces, this portion of the drywell as well as: its components was investigated and designed for jet forces in conjunction with the other load combinations as set forth in Figures 3.8-4 and 3.8-5. The effect of
- eccentricities on possible jet forces was also analyzed and the design provided reinforcements and stiffeners as required to maintain stresses within specified limits.
In conclusion, the design ofthe personnel and equipment hatch is adequate, and provides a safe and well engineered structure. Flooded Condition The drywell vessel has been analyzed for its ability to withstand loading resulting from partial flooding and for maximum flooding to El. 74'-6" (see Figure 3.8-8). In each case, the maximum stress computed for various locations on the shell are below the ASME Code allowables. In addition, critical buckling of the vessel under flooded conditions has been analyzed. The results of this analysis show that.there. is ample margin of safety under either flooding condition. Buckling Considerations The drywell shell must be capable of resisting the compressive stresses resulting from the external pressure, the dead load of the shell and appurtenances, the dead load of the compressible material, the live load on the access and beam loads, the gravity loads on the weld pads, plus the wind or seismic loads. These loads produce uniaxial compressivestresses of varying magnitude at different points along the drywell shell. Section VIII of the ASME B&PV Code (1950), permits an allowable compressive stress of 1,800,000 (t2/R) for uniaxial compression.; Later editions of the code do not include this equation as such, but include tables for allowable external pressures which are based on this allowable. 3.8-25 Update 7 12/92
OCNGS FSAR UPDATE The state of stress at any.point in the spherical. shell may be expressed as a biaxial. compressive stress plus a uniaxial compression.. By combining the T, and T2 stresses acting at the point algebraically, the allowable compressive stress is then giyen by the relationship: (T2 - Tj)/l.8 X 10 6 (t-/R) + T1/9 x 10(t 2/R)£1, where T, and T2-are compressive stresses. This relationship applies to buckling of the spherical shell I under biaxial compression. Also: T2/1.8 x 106(t2/R)£1 which is the axial buckling of the cylindrical shell.
" " I The stress values at the different points along the shell are summarized in Table 3.8-2 and are below the ASME allowables.
Summary Since all possible loads, as well as their combinations, have been taken into consideration, and the maximum stresses computed are all within the design specifications and ASME Boiler and Pressure Vessel Code allowables, the drywell design is adequate. 3.8.2.4.2 Torus Following the original design of the facility, additional design, analysis and modification work was performed for the torus under the Mark I Containment Systems Evaluation Program. These efforts are described in detail in References 2 through 11. The general analytical procedures and computer techniques utilized in the design modifications of the suppression chamber are provided in Reference 10. The discussion that follows was extracted from. Reference 1, the Primary Containment Design Report. Primary Membrane Stresses The absorption chamber is supported on twenty pairs of columns located on the inner and outer peripheries and equally spaced. An internal ring girder of variable cross section has been provided at each of the supporting points to reduce local stresses and to add stiffness to the section. Although the principal stresses computed on the absorption chamber were circumferential, detailed analyses have been performed to determine the magnitude of localized stresses at the points of column and downcomer supports, vents, etc., to determine the need for and provide additional stiffeners and reinforcing as required. I 3.8-26 I Update 7 12/92 I I
OCNGS FSAR UPDATE Tests specifically for this application of the material conducted by the United States Testing Company, were to determine increments of pressure required to cause increments of deflection up to 50 percent of sample thickness. The samples were made using the production equipment and procedure to spray onto metal surfaces; the tests were made with samples in vertical and horizontal positions, at ambient temperature and at 3009F. Material loss after compaction was measured on test panels compressed in the vertical position; loss was about I percent of compressed sample weight; it was observed that loss was occurring at the break in the samples at
- the perimeter of the compression shoe, a discontinuity which would not occur in service. The reduction in thickness of the samples results principally from the collapse ofthe cellular structure impacted by.the foam and maintained by the magnesite cement, however, some elastic compression of the asbestos fibers would be expected. The test samples were retained by the testing agency for periodic observation of rebound; rebound stabilized at 20 percent of total deflection.
The tests and evaluations indicated that the foamed asbestos fiber magnesite cement product has the required compression characteristics and stability, and would be unaffected by long term exposure to radiation and heat. Further evaluation of the design of Primary Containment penetration is.presented in References 13 and 14. 3.8.2.5 Structural Acceptance Criteria The Structural Acceptance Criteria relating the design and analysis results for the loads and loadl combinations given in Subsection 3.8.2.3 to theallowables, is presented in Subsection 3.8.2.4 and other referenced documents. The Basic Design phase of the Containment System is given in Subsection 3.8.2.4 and the references listed. in Subsection 3.8.6. These reference documents must be addressed to obtain complete information. A summary of allowable stresses considered in the original design of the facility used in conjunction with certain seismic loading combinations is given in Table 3.8-3. 3.8-45 Update 7 12/92
Oyster Creek Nuclear Station FSAR Update 3.8.2.8 Drywell Corrosion 3 The potential for corrosion of the. drywell vessel was first recognized when water was noticed .coming from the sand bed drains in 1980. Corrosion was later confirmed by ultrasonic thickness (UT) measurements taken in 1986 during I IR. During 12R (1988) the first extensive corrective action,. installation of a cathodic protection system, was taken. This .proved to be ineffective. The system was removed during 14R (1992). 3 The upper regions of the vessel, above the sand bed, were handled separately from the sand bed region because of the significant difference in corrosion rate and physical difference in design. Corrective action for the upper~vessel involved providing a corrosion allowance by demonstrating, through analysis, that the original drywell design pressure was conservative. Amendment 165 to the Oyster .Creek TechnicalSpecification (Ref. 48) reduced the drywell design pressure from 62 psig to 44 psig. The, new design pressure coupled with measures to 3 prevent water intrusion into the gap between the vessel and the concrete will allowthe upper portion of the vessel to meet ASMIE code for the remainder life of the plant. In the sand bed region laboratory testing determined the corrosion mechanism to be galvanic. The high rate of corrosion in thisregion required prompt corrective action of a physical nature. Correctiveaction was defined as; (1) removal of sand to break upthe galvanic cell, (2) removal of the corrosion product from the vessel and (3) application of a protective coating. Keeping the I .vessel dry was also identified as a requirement eyen though it would be less of a concern in this region oncethe coating was applied. The work was initiated during 12R by removing sheet metal from around the vent headers to provide access to the sand bed from the Torus room. *During operatingcycle 13 some sand was removed and access holes were cut into. the sand bed region through the shield wall. The work was finished~during 14R. After sand removal, the concrete floor was found to be.unfinished with improper provisions for water drainage. Corrective actions taken in this region during 14R included; (1) cleaning of loose rust from the drywell shell, followed by application of epoxy coating and (2) removing the loose debris from the concrete floor followed by rebuilding and reshaping the floor with epoxy. to allow drainage of any water that may leak into the region. I I I 3.8-61 i Update 10 04/97 i I
Oyster Creek Nuclear Station FSAR Update During 14R, UT measurements were taken from the outside surface of the drywell vessel in the sand bed region. Measurements were taken in each of the ten sand bed bays. The results of this inspection and the structural evaluation of the "as -found" condition of the vessel is contained in Reference 44. As documented in the TDR, the vessel was evaluated to conform to ASME code requirements.given the deteriorated thickness condition. In general these measurements verified projections that had been made based on measurements taken from inside the drywell. Several areas were thinner than projected. In all cases these areas were found to meet ASME code requirements after structural analysis. The cleaning, floor refurbishing and coating effort completed in 14R will mitigate corrosion in the sand bed area. Since this was accomplished while the vessel thickness was sufficient to satisfy ASME code requirements, drywellivessel corrosion in the sand bed region is no longer a limiting factor in plant operation. Inspectionswill be conducted in future refueling outages to ensure that the coating remains effective. In addition, UT measurements will also betaken -from inside the drywell. The:frequency and extent of the coating-inspections and UT thickness measurements will be per Reference 47, as follows:
- 1. For the upper elevations, UT measurements Will be made during the 16th. refueling outage (September, 1996) and during every second refueling outage, thereafter. After each inspection,la determination will be made if additional inspection is to be performed.
- 2. For the sandbed region, visual inspection of the coating as well as UT measurements of the shell will be mnade during the 16th. refueling outage. The coating will be inspected again during the 18th. refueling outage (Year 2000). Based on the results of the inspection of the coating, determinations will be made for additional inspections.
- 3. For water leakage not associated with refueling activities, an investigation will be made as to the. source of the leakage. GPU Nuclear. will take corrective actions, evaluate the impact of the leakage and, if necessary, perform an additional drywell inspection about three
-months after the discovery of the water leakage.
Reference 42 provides the evaluation of the latest drywell UT inspections through the next scheduled inspection. GPUJN will notify NRC priorto implementing any changes to the drywell thickness measurement inspection program (Reference 43). 3.8-62 Update 10 04/97
U Oyster Creek Nuclear Station FSAR Update 3.8.5.6 Materials, Quality Control and Special Construction Techniques The primary materials of construction are concrete and reinforcing steel. Their descriptions and basic qualitycontrol procedures are discussed in Subsection 3.8.4.6. There .were nospecial construction techniques. 3.8.5.7 Testing and Inservice Surveillance Requirements The ability of the drywell and torus to transmit pressure associated loads to the soil .media via the foundations has been demonstrated by the, structural integrity test described in Subsection 3.8.2.7. No preoperational or inservice surveillance tests are required for the other Category I structure foundations. 3.8.6 References (1) Oyster Creek Nuclear Power Plant Unit No. 1, Facility Description and Safety Analysis Report, Docket ýNo. 50-219, Amendment No. 15, Primary Containment Design Report, September 11, 1967. (2) NUREG-0661. Safety Evaluation Report, Mark IContainment Long Term Program Resolution of Generic Technical Activity A-7. July 1980. . (3) NUREG/CR-1083, LBL-6754. Aslam, M; Godden, W.G.; and Scalise, T. Sloshing of Water in Annular Pressure Suppression Pool of Boiling Water Reactors under Earthquake Ground Motions. Lawrence Berkeley Laboratoryfor U.S.N.R.C. October 1979. (4) NUREG/1082, LBL-7984. Aslam, M; Godden, W.G.; and Scalise, T. Sloshing of Water in Torus Pressure-Suppression Pool of Boiling Water Reactors under Earthquake Ground Motions. Lawrence Berkeley Laboratory for U.S.N.R.C. October 1979. (5) NUREG-0408.* Mark I Containment Short Term Program: Safety Evaluation Report. I December. .1977. (6) NEDO-21888 (Revision 2). Mark I Containment Program: Load Definition Report. November 1981. (7) NEDO-24572 (Revision 2). Mark I Containment Program: Plant Unique Load Definition Oyster Creek Nuclear Generating Station. July 1982.. (8) NEDO-24583-1. Mark I Containment Program Structural Acceptance Criteria: Plant-Unique Analysis Application Guide. October 1979. 3.8-115 I Update 10 04/97 I
Oyster Creek Nuclear Station FSAR Update (9) NEDC-23702-P. Arain, S.M. Mark I Containment Program: Seismic Slosh Evaluation. March 1978. (10) MPR-733. Oyster Creek.Nuclear Generating Station Mark I ContainmentLong-Tenn Program: Plant-Unique Analysis Report Suppression Chamber and Vent System. August 1982. (11) MPR-734. Oyster Creek Nuclear Generating Station, Mark I Containment Long Term Program: Plant-Unique Analysis Report Torus Attached Piping. August 1982. (1 la) MPR-722. Oyster Creek Nuclear Generating Station, Mark I Containment Long Term Program: Plant-Unique Analysis. Supplemental Report. July 1983. (12) Von Karman, "The Buckling of Spherical Shells by External Pressure," Pressure Vessel and Piping. Design, Collected Papers, ASME, 1960, pp. 633 to 640. (13) Oyster Creek Nuclear Power Plant Unit No. 1, Facility Description and Safety Analysis Report, Docket No. 50-219, Amendment No. 50, Primary Containment Penetration Design, March 1969.2 (14) Oyster Creek Nuclear Power Plant Unit No. 1, Facility Description and Safety Analysis Report, Docket No. 50-219, Amendment No. 51, Supplemental Information Regarding Primary Containment Penetrations, March 21, 1969. (15) Letter from I. R. Finfrock, Jr. (JCP&L) to George Lear (NRC), dated November 1, 1977, on Torus Pool Swell-Relief Valve Actuation. (16) Letter from George Lear (NRC) to I.R. Finfrock, Jr. (JCP&L), dated March 24, 1977, Summary of March 4, 1977 Meeting Results, Related to Torus Inspection for Corrosion and Staggered Relief Valve Set Points. (17) Letter EATJM-190, March 22; 1977, Report on Steam* Vent Cleaning Phenomenon. (18) Letter EATJM-29, January 10, 1977, Report onSteam Vent Clearing Phenomenon. (19) Letter EA-76-686, July 16, 1976, Oyster Creek Torus Shell Thickness Evaluation. (20) Drwg 4104-1. Biological Shield Wall (21) Drwg 4205-1 Biological Shield Wall, Sections & Details (22) Drwg 4069-4 Radial Beam Framing (Inside Drywell) 3.8-116 Update 10 04/97
Oyster Creek Nuclear Station FSAR Update (23) Drwg 2063-4 General Arrangement-Reactor Building Sections (from Print Book; shows drywell internals). (24) Drwg 4049-7 ReactorBuilding FloorPlan & Sections (Outside Drywell Shell). (25) Drwg CBI 34-3 Floor Framing Bracket (26) Drwg CBI 35-3 Floor Framing Hanger (27) Calculations 19-62 Dryweil Steel Framing at El. 46'-08" to 19-102 (28) Calculations 29-19 (29) Calculations 9-126 to 9-304 (30) Calculations 21-32 to 21-56 (31) Calculations 6-1 to 90 (32) Letter from D.A. Ross (JCP&L) to B.H. Grier (NRC:I&E), dated December 7, 1979, Re: IE Bulletin 79-02 (33) Letter from D.A. Ross (JCP&L) to B.H. Grier (NRC:I&E), dated August 3, 1979, Re: IE Bulletin 79-02.. (34) Letter from D.A. Ross (JCP&L) to B.H. Grier (NRC:I&E), dated July 6, 1979, Re: IE Bulletin 79-02. (35) Letter from P.B. Fiedler (GPUN) to D.M. Crutchfield (NRC: DRL), dated November 2, 1983, Re: IE Bulletin 80-11. (36) Letter from P.B. Fiedler (GPUN) to D.M. Crutchfield (NRC: DRL), dated August 11, 1983, Re: IE Bulletin 80-11. .(37) Letter from I.R. Finfrock, Jr. (JCP&L) to B.H. Grier (NRC: I&E), dated September 19, 1980, Re: fE Bulletin 80-11. (38) Calculations, Sheets 9-1 to 9-25, Frame 37. (39) Drawings 4075-7, 4049-7, 4103-4. 3.8-117 Update 10 04/97
33/'2 : f 'ý6 : 2 .:b 0 APPLICANT'S EXHIBIT 39
,,* ~~GE Nuciea; En:fn December 11, 1992 To: Dr. Stephen Tumminelli Manager, Engineering Mechanics GPU Nuclear Corporation I Upper Pond Road Parsippany, NJ 07054
Subject:
Sandbed Local Thinning and Raising the Fixity Height Analyses (Line Items 1 and 2 in Contract # PC-0391407)
Dear Dr. Tumminelli:
The attached letter report documents the results of subject analyses. The original purchase order called for the analyses to be conducted on a spherical panel model rather than on the full pie slice model. However, the results are more useful when conducted on the full pie slice model since in that case no interpretation is required regarding the relationship betwe*n the spherical panel results and the pie slice model results. The pie slice model we have used in these studies has the refined mesh in the sandbed region. A 3.5" PC Disk containing three ANSYS input files (0.636" case, 0.536" case and i foot wall case) is also enclosed with this letter. The detailed calculations have been filed in Chapter 10 of our Design Record File No. 00664. This transmittal completes the scope of work identified in the subject PO. If you have any questiohs on the above item, please give me a call. Sincerely, H.S. Mehta, Principal Engineer Materials Monitoring & S!ructural. Analysis Services Mail Code 747; Phone (406) 925-5029
Attachment:
Letter Report cc: D.K. Henrie (w/o Attach.) J.M. Miller (w/o Attach.) S. Ranganath (w/o Attach.) HSMOC-57. wp
U LETTER REPORT ON ADDITIONAL SAINDBED REGION ANALYSES U 1.0 SCOPE AND BACKGROUND Structural Analyses of the Oyster Creek drywell assuming a. degraded thickness of 0.736 inch in the sandbed region (and sand removed) were documented in GENE Report Numbers 9-3 and 9-4. A separate purchase order was issued (Contract # PC-0391407) to perform additional analyses. The PO listed the additional analyses under two categories: Line Item 001 and Line Item 002. This letter report *documents the results of these analyses. 3 The additional analyses are the following: (1) Investigate the effect on the buckling behavior of drywell from postulated local thinning in the sandbed region beyond the uniform projected thickness of 0.736" used in the above mentioned reports (Line Item 001). (2) Determine the change in the drywell buckling margins when the fixity point £ at the bottom of the sandbed is moved upwards by 1 foot to simulate placement of concrete (Line Item 002). 3 The original PO called for the Line Item 001 analyses to be conducted on a spherical panel. The relative changes in the buckling load factors were to be assumed to be the 3 same for the global pie slice model. However, the mesh refinement activity on the global pie slice model and the availability of work station, has given us the capability to conduct the same analyses on the global pie slice model itself, thus eliminating the uncertainties regarding the correlation between the panel model and the pie slice model. All of the results reported in this report are based on the pie slice model with a refined mesh in the sandbed region. 3 2.0 LINE ITEM 001 Figure la shows the local thickness reductions modeled in the pie slice model. A locally thinned region of 6"xi2" is modeled. The thickness of this region is 0.636" in one
* -
3
-i- :I U.
ca and .0.536" in the other case. The. transition to the sandbed projected thickness of case 0:.736: occurs over a distan-ce of 12" (4 elements). The various thicknesses indicated in Figure. Ia were incorporated in the pie slice model by defining new real constants for the elements involved. The buckling-analyses conducted as a result of mesh refinement indicated that the refueling loading condition is the governing case from the point of view of ASME Code margins. Therefore, the stress and buckling analyses were conducted using the refueling condition loadings. The center of the thinned area was located close to-the calculated maximum displacement point in the refueling condition buckling analyses with uniform thickness of 0.736 inch. Figure lb shows the location of the thinned area in the pie slice model. 2.] 0.536 Inch Thickness Case Figures. 2 through 5 show the membrane meridional and circumferential stress distributions from the refueling condition loads. As expected, the tensile circumferential stress (Sx in element coordinate system) and the compressive meridional stress (Sy in element coordinate system) magnitudes in the thinned region are larger than those at the other edge of the model where the thickness is 0.736 inch. However, this is a local effect and the average meridional stress and the average circumferential stress is not expected to change significantly. Figures 6 and 7 show the first buckling mode with the symmetric boundary conditions at both the edges of the model (sym-sym). This mode is clearly associated with the thinned region. The load factor value is 5.562. The second mode with the same boundiry conditions is also associated with the thinrmed region. Figure 8 shows the buckled shape. The load factor value is 5.872. Next, buckling analyses were conducted with the symmetric boundary conditions specified at the thinned edge and the asymmetric boundary conditions at the other edge (sym-asym). The load factor of the first mode fot this case was 5.58. Figure 9 shows the bucklirg mode shape. It is clearly associated with the thinned region. Figure 10 shows the buckled mode shape with asymmetric boundary conditions at the both edges (asym-asym). As expected, the load factor for this case is considerably higher (7.037).
,I ThuS, the load factor value of 5.562 is the lowest value obtained. The load factor for the
.*ame~loadinfgiase=(refueing condition) with a uniform thickness of 0.736" was 6, 141. 3 Thus, the load factor is predicted to change from 6.141 to 5.562 with the postulated thinning to 0.536".
2.2 0.636 Inch-Thickness Case Figures 11 through 14 show the, membrane meridional and. circumferential stress distributions from the refueling condition loads. As expected, the tensile circumferential stress (Sx in element coordinate system) and the compressive meridional stress (Sy in element coordinate system) magnitudes in the thinned region are larger than those at the other edge of the model where the thickness is 0.736 inch. However, this is a local effect and the average meridional stress and the average circumferential stress is not expected to change significantly. Figures 15 and 16 show the first buckling mode with the symmetric boundary conditions at both the edges of the model (sym-sym). This mode is clearly associated with the I thinned region. The load factor value is 5.91. Next, buckling analysis.was conducted with the symmetric boundary conditions specified I at the thinned edge and the asymmetric boundary conditions at the other edge. The load factor of the first mode for this case was 5.945. Figure 17 shows the buckling mode 3 shape. It is clearly associated with the thinned region. Based on the results of 0.536" d.case, the load factor for asym-asym case is expected to be considerably higher. I Thus, the load factor value of 5.91 is the lowest value obtained. The load factor for the same loading case (refueling condition) with a uniform thickness of 0.736" was 6.141. 5 Thus, the load factor is predicted to change from 6.141 to 5.91 with the postulated thinning to 0.636". 3 2.3 Summary The load factors for the postulated 0.536" and 0.636" thinning cases are 5.562 and 5.9.. respectively. These values can be compared to 6.141 obtained for the case with a uniform sandbed thickness of 0.736 inch. I I I
3,0 LINE ITEM 002 Theiobjective of.this task was to determine therchange in the drywell buckling margins when the fixity point at the bottom of the sandbed is moved upwards by -- 1 foot to simulate placement of concrete. The elements in the sandbed region are approximately 3-inchsquare. Thus the nodes.associated with the bottom four row of elements (nodes 1027 through 1271, Figure 18) were fixed in all directions. -The buckling analyses conducted as a result of mesh refinement indicated that the refueling loading condition is the governing case from the point of view of ASME Code* margins. Therefore, the stress and buckling analyses were conducted using the refueling condition loadings. Figure 19 through 22 show the membrane meridional and circumferential stress distributions from the refueling condition loads. Figure 23 shows the calculated average values of meridional and circumferential stresses that are used in the buckling margin evaluation. Figure 24 shows the first buckling mode with sym-sym boundary conditions. The load factor for this mode is 6.739. The load factor with asym-sym boundary conditions is 6.887 and the mode shape shown in Figure 25. It is clear that the sym-sym boundary condition gives the least load factor. Figure 26 shows the buckling margin calculation. It is seen that the buckling margin is 5.3% compared to 0% margin in the base case calculation. To summarize, the load factor changes to 6.739 for the refueling condition when the fixity point at the bottom of the sandbed is moved upwards by 1 foot. This results in an excess margin of 5.3% above that required by the Code. HSMOC-57. wp
-4
7 I
~i Y Nuclear' Calculation. Sheet
( I I I Pro ThFed a~
&ga aoi ý,4 ?A.I*/j~/ & S~el I I
I CA5e (A~) I I I I I I I I I I Gr \,ý R-,F-I
O()2/2C iO 6:2:'.-E 9o le, - 4ý,? p
'5 ~iz'27r
-eZrrcL 5b f J
ANSYS 4.4A1 DEC 9 1992: 17:41 :51 POSTI STRESS STEP-1 ITER=1 Sx (AVG) MIDDLE ELEM CS 0MX -0.222715 S;M -- 3561 SMX 7.6 14 xv. ýi YV o-.a DIST1. 786 .:,.-* C XF -303.031 ZF =r639.498 rfl o, ANGZ -9'0
,j CENTROI Df HIDDEN 375614 OYSTER CREEK DW ANALYSIS - OCRFTH1 (NO SAND, REFUELING) -4
-= = = -1 m m m -= =- 1 m m m mI1
ANSYS 4.4A1 DEC 9 1992 17: 43:35 POSTI STRESS STEP-I ITER=I Sx (AVG) MIDDLE ELEM CS DMX -0.222715 SMN =-3561 SMX =7614 "Ti xv -1 zV =-1 ODIST-121.539 OXF
* -46.39
- 0 YF -- 1.382 I'l OZF =382.8S7 ANGZ=-o0 IC" *CENTROID HIDDEN.
c "-3561
-1078 i 163.887 1406 t 2647 3889 6372 7614 O.,.
OYSTER CREEK, DW1 AMALYSIS -OCRFTIII (1i0O SAi5D, REFUELING*I-<
ANSYS 4.4A1 DEC 9 1992 17 :42: a8 POST.1 STRESS
'team&,STEP-i ITER=I SY (AVG)
MIDDLE ELEM CS DMX -a.222715 SMk -- 9943 SMX -701.049 XV -I
*v I-o.a DIST-7-18:., 786 XF -33.ý 031 ZF -639.,498 Al~l ANGZ--§b CENTROI6D HIDDEN -6395 -4030 -2a47 J. -4+--I -481.591 O
OSECEESS (, 701.L49 OYSTER CREEK DW AMA&LYSIS -- OCRFTH1 ,(NO SAND, REFUELING) - mm *-m mom I-o mm - im
mnI mI -- \ n I m ,IIm nm - -m
- - ~-.. .A . .... : r ANSYS 4.4A1 -. ,.-., .,' . DEC 9 1992 17/:43: 49 POST1 STRESS
(, *Y*,* * ,,*'.){ """ *STEP-1
"-/ t ' ITER=l \, ,, sy (AVG) ' '*'-*MIDDLE ELEM CS , * 'DMX -0 ,222715 j SMN -- 943 , ,-..-SMX --711l I49 xv -1 °'** - ', .4 * " *--$Ž- ZV , - ZF ,,.-.03,* =-1382.857 I. J A '
N ~CENTROID HIDDEN *;
-9943 ~-8760 -6395 * -4030 -2847 -1664 -481. 591 701.049 OYSTER CREEK DV ANdALYSIS - OCRFTH1 (PAO SAND, REFUELING)
ANSYS 4.4A1 DEC 10 1992 6:55:43 POSTI STRESS STEP-1 ITER=1 FACT-S. 56Z UX D NODAL DMX -G..00607i3 SAX zO0D345 xv .1 Yv =-o .a
=DiST-89 ..401** *XF -262.142 qYF -- 51.111 *ZF -148.214 ANGZ.-90 CENTROID HIDDEN 0.006392 I-0.001848 -0.782E-03 U..001334.
0%.002392 o.obPu4s m " m m - m - -- m - - m -- -
-n m~ m- m n m m n m m n --
' ANSYS 4. 4A1 . .DEC 10 1992 Jt, 6 :57 :10 j;' POST1 STRESS SV '71 STEP-1
- ITER=I FACT-5. 562 4pX R.N.D MODAL*
Vi ~DMX -0. 00:6:0 73 ySIN -- o o. 6 07 2 SMX =0.00345 PX -2v9-1 C-7r OD I S T =- 84
- 0. 00 OYF -0.460954 ooZF -365. 922 :
ANGZ--9fJ "V CENTROID HIDDEN
-0.006072 -0.002898 S-0.782E-03
[*0.276E-03 0.002392
- 0.00345 OYSTER CREEK DRYWELL AMALYSIS - OCRF0SBSS (NO SAND, REFUELING)
-c
ANSYS 4.4A1 DEC 10 1992 8: 10 :04 POSTI STRESS STEP-i ITER=2 FACT-S.872 ux D NODAL DHX -0.006414 SMN --. 0 06 414 S 4X =01,092261 xv -i ZV -'1
*DIST-110.a04 *XF -29.455 OYF. -0.460954 *ZF -365.922 ANGZ--90 CENTROID HIDDEN -0.006414 -a. 0: 5 45 -0.0o44a6 I -0.00255a
_ -0.001594
-0.630E-03 O .333E-03 0.0012697 0.002261
-m m m m immmmm - m m -m mmm m m m m
-
- ANSYS 4.4A1 JIMII DEC 10 1992 POST1 STRESS r~ IITER-1 STEP-1 FACT -5 58 UX I -b ..!. 0 NODAL DMX -o;2905974 S7N -- 0. 00159072
-0.003.82 -SMX i ' Xv V I="I OIST-110 - 004 oYF 0.40. 0 9534.
S OZF -365.922
~~ANG Z I- 90 ~CENTROID HIDDEN*
j~ " 10 0:5 97 2 F -29. 455-0 0.0049 I ~~-0.S-0. 003827 0012175 4
. . ... ' II - 0 .0 0 1 6 8 1 -0.609E-03
- o. 464E-03
- 0. 003682 C'
OYSTR- CREK CRF5AS.NO AB*LYSS AND*REFELIN) , NJ
ANSYS 4.4A1 DEC 10 1992 10:12:22 POST1 STRESS STEP-i ITER-1 FACT-7.037 ux D NODAL DM)X -0.003492 SM N -- 0.10Z2088 SkX -0.00216.4 XV -1 ZV -- 1
*DIST=I10304 vXF -29.455 *yF Y -0.460954 *ZF -365.922 ANGZ- 90 CENTROID HIDDEN o -0.0021388
[* -0.001143
- -0.198E-03 0.274E-03 '
- 0.747E-03
.0.001219 0.001691 ORA S(OE0.002164 OYSTER CREEK OW ANIALYSIS -OCRF95AA ýNO SAND,,,,,.....
REFUELING)
n Hm m m -ir m -= = m m m m
- m m m -= m m m m= m-= ANSYS 4.4A1 DEC 10 1992 8:18:30 POST1 STRESS STEP-1 ITER=l SX (AVG) MIDDLE ELEM CS DMX -0.222456 SMX =0950
-n ~j~b XV -1 Vv -- 0.8 DIST-718. 786 XF =-33.031 ZF =-63*949a ANGZ--90 CENTROID. -3554HIDDEN 2.87a -- z 809 3.44a 4615 6950 OYSTER CREEK( D'd AWALYSIS -OCRF06S (NO SAN4D, REFUELING) IQ --Cý ,
- .'ANSYS 4 '4A1
- DEC 10 1992 8:21 :15 POSTI STRESS STEP-i ITER=1 sx AVG)
MIDDL " ELEM CS DMX -0.222456 SM4N -- 35.54 SMX =6950 XV -1 ZV =-i
*D.IST-Z1.2539 C, ,8YF =--.3a2 * 'ZF ' * -3382 .857 J ~ANGZ =- 9 opt ~C ENTROID HIDDEN -3554 -2387 ..m.. 1114 2281 3448 4615 5783 O69SS OYSTER CREEK 2W.ANALYSIS - OCRFOeS.(NO SAND, REFUELING) *
- m= m m m m mm m m m - m =m = =
ANSYS DEC 4.4A1 10 1992 8:18:45 POSTI STRESS STEP-I ITER=1 SY (AVG) MIDDLE ELEM CS DMX . 2224.5 6 SMN -- 8767
'A =69-4x.653 *
- v~V =-1 .
Yvv 1,DIST-718.786 XF -303..031 ZF =639.4,98
.* ,, ... GZ..U 0- t- + .4- *. , 66 : -3.511 -2459 -356.637 694. 653 OYSTER CREEK DW ANALYSIS = OCRFO6S (NO SAND, REFUELING) --c
'*:'":'" ANSYS DEC 10 1992 4. 4A1 * ';*;':~t* ,, o '-i;;*.;-" POSTI STRESS <1 2 STEP-i ,.e.-- ' 'c... .-. ITER=1 , .' ' SY MIDDLE (AVG) * * ". E LEM CS 7 -.... _./ " ....
II D DMX SMN -'0 .222456
--87 67 SI4X -69.4.653. , .h *./xv -I 11 ~ZV '-
r
.,.DIST-12.1.539 "XF YF I, 39 a2 3 * ;-:/ *,
ru ANG Z - - 9.0 CENTROID HIDDEN
-8767 -6664 -5613 * -4562 -3511 -2459 * : * --35 6. 6 37 -, 694.653 OYSTER CREEK D'd ANALYSIS OCRFO6S (NO SAND, REFUELING) ,,
m m - mm - - m m m m m m m m mm m m m
m - -m - -,m - - m m---- m m-m--mm- -m __________ ~ANSYS 4. 4A1 SDEC 10 1992
-, a~~- ~ STEP- 1 Mf UK.iS i 'IM. Wr NOA ~D1ST-8. 40,517 MI. SM -0 00S5174 -0.00326
j ,,'..% , .. VA N S YS 4 4A 1
,W*'.
1DEC ...... 19 1992
,( 'V~ ýý 7 ýj, ; : 10 :37 .5STRESS POST1 6 3t STEP-I
- n. ITER=l A..
tvFACT = .91i UX D NODAL ml v 40, SMX -0.005175 r;T.-lSMN .- 0o.0651i7 4 XV =I ZV =-1 4* 3. *DIST-100.004 XF -29.455
*YF *ZF -0. 4630954 -365.922 To rnANGZ f - -90 CENTROID HIDDEN -0.005174 *.' . l.. ~-9z .0..0 4237 0 .0033 0002362 0 -0 .001425 -0.488E-03 S 0."449E-03 0.001386 0.002323 0.00326 OYIER CREEK DRYWELL AMAALYSIS - OCRF06BSS (NO SAND, REFUELING) ",I m m - - - - - m 1m m - m m -
m
m-m im- m m mmmmm n- -- m n m.-
._ m n * *F
- mm'*#'mh"&* .j ANS'f 4.4A1
'(DEC 10 1992 S16: 48:07 .
POSTI STRESS
+ STEP=t ITER=l FACT=5.945 ux s.- *..0 NODAL ~ .. i.~ ~DMX SMN =0'.005178 =-0.'005,178 SMX =0.003584 ZV =1I .*DIST=110.004 ,
B XF =29.455 C* -YF =0.460954
-ZF =365.922 ANG7=-90 CENTROID HIDDEN -0.005177 . ~ * ~ -0.004203 -.- o0.=.
0
-0.003235' -0.002856 0 .310E-03 * '-M 0.664E-03 0.0016.37 0.002611 0.003584 OYSTER CREEK OW ANALYSIS - OCRFO6AS (NO 5AND. REFUELING)
d
!!
I' ei,- 217q Ir
'A 0
7- 1 &UQY PT-
!lr Ii
m m -- [.._-lm - - "- :- m ANSYS 4.4A1 DEC 7 1992 12:44:31 POST1 STRESS STEP-I ITER=1 SX (AVG) MIDDLE ELEM CS DMX -0.211959 SON -- 3507 XV -1 YV ,.8
-- .
C~,I T- 71a. 7a.6 XF -303.03':1 ZF -63.9.49,a ANGZ- - 4J0 CENTROID HIDDEN
-35.4 -1416 I' ili 714.4.37 17.8 O-3ToSaD4 OYSTER CR*lEEK DRY--ELL ANALYSIS. OYCl~lS (N SANDo, REFEIG
- '- ANSYS 4. 4A1
" DEC 7 1992 , 1 .- r .,Wi 12 :33 33 ',*' ' POSTI STRESS STEP-1 ITER=I SX (AVG)
MIDDLE ELEM CS DMX -0.211959 SMN '--3547 SMX -6041 XV -,I
-1~Zv '--i *DIST.121. 539 OXF '46 .3ý9.
C - YF -- 1.382 OZF -3A2.857 ANGZ--90 CENTROID HIDDEN
-3547 -350.8a4 714.437 t 1780 E-- ;2845 * =ms4975 6641 OYSTER CREEK DRYWELL ANALYSIS - OYCRIS (NO SAND, REFUELING) m oft wM, 0-n=m =mmmýo mm
- - -m -lI_ m m m_ - - - ANSYS 4.4A1 DEC 7 19.92 12 :44:44 POST1 STRESS STEP-.i ITER-1 sY (AVG) MIDDLE ELEM CS H-+H--DliX -0.211959 SMN --795.6 SMX -766 .953
' [i . XV -
yV -- I:.a DIST 7 1: -786. XF - 303. 0l0,3 ZF -63q..498 ANGZ--S9O CENTROID1 HIDDEN'
, ' ' *,** -6987 -6014 , *, ,, *,*,-4-079* *'*++÷+*'*-3110 21417 --1172 -2022.301 OYSTER CREEK DRY'4ELL ANALYSIS - OYCR1S (NO SAND, REFUELING)
ANSYS 4. 4A1 DEC 7 1992 12:34:18 POSTI STRESS STEP- 1 ITER=I SY (AVG) MIDDLE ELEM CS DMX -0 211959
'~~~~~~ -- ':" '-,osMx SMN -- 7 795-66:6 .953 - ZV -
S IST -1211 539
' -,_ _*XF -4.6.39 C*YF - -1.38 z *2F -382.8S7 ANGZ-- 9.0 CENTROID HIDDEN -7956 -6987
{* -. 5049
-u-4079 ,-
- 3110
-2141 -1172 -202.301 766.953 OYSTER CREEK DRYVELL ANALYSIS - OYCRIS (NO SAND, REFUELING)
-m
n -o m ;i I
- .- mn -, m -m, mE 'm
APPLIED MERIDIONAL AND CIRCUMFERENTIAL STRESSES - REFUELING CONDITION ONE FCOT INCREASE IN FIXITY CASE; STRESS RUN; OCRFRLSB.OUT AVERAGE APPLIED MERIDICNAL STRESS: The average meridional stress is~defined. as the average stress across the elevation inctuding:!n6des, 1479 through 1467. Stresses at nodes :419 and 1467 are weighted only one-half as much.as, the other nodes because they lie on the edge of the modeled 1/10th section of the dryweit and thus represent only 112 of the area represented by. the other nodes.
#of Nodes x # of Meridicnat Meridional Nodes Nodes Stress (ksi) Stress Cksi) 1419-1467 -7.726 -7.726 1423-1463 2 -7.738. -15.476 1427-1459 2 -7.760 -15.520 1431-1455 2 -7.682 -15.364 1435-1451 2 -7.394 -14.788 1439-1447 2 7.01/. -14.028 1443 2 -6.8304 Total 12 -89.i36 12 .............
Average MeridionaL Stress: -7.478 (ksi) AVERAGE APPLIED CIRCUMFERENTIAL STRESS: The circJiferential stress is averaged-along the vertical line from node 1223 to node 2058.
# of Nodes # of Ci rcumferenti at Circumferential Nodes Nodes Stress (ksi) Stress Cksi) 1223 0 -1.175 0.000 1419 O.505 0.505 1615 4. 165 4.165 1811 5.82" 5.846 2058 5.024 5.024 Total : 4 15.54 .4 Average Circumferential Stress: 3.835 (ksi)
OCRFST06.WK1
DEC 8 1992 6 :15 38 SPOSTI STRESS STEP= I Pf ITER=I yiq g-FACT=6.739 0 W.D NODAL DMX =0.003681 SMN =-0.00368 SMX =0.001848 XV =-12 fDIST=110.004
*XF =29.455 "-* *YF =0.460954 $ ZF =365.92t ANGZ=-90 CENTROID HIDDEN -0.00368 -0.003065 -0.002451 -0.001837 -0.001223 -0.60§E-603 .0.567E-05 0.620E-03 0.001234 0.001848 OYSTER CREEK ORYWELL ANALYSIS.- ocrFs-s (NO SAND. REFUELING) l'-I ~ ,- - wu / m. _ m i ,I l-
- -- mmmmm m nm - r- -, - --m m
- r ANSYS 4 4A!
*"*;:*:'J DEC 9 1992 ~y 11:35 17 p POSTI STRESS STEP,,1 . JA ITER=I FACT-6. 887 D NODAL DMX = 0,905136 SMN -- 0.005134 SMX -0.003244 ZV - 1 "DIST-l10 .004 'XF -29.455 .,CYF -0.460954 !'* 'OZF -365. 922 ANGZ--90 CENTROID HIDDEN -0.005134 b0023420.004203 --0.003273 -0.480E-03 ' 0,4S1E-03 0..002313 0.003244 wu ..- , * - r* lt .. m f ,I~
i l * " A. . FJ --... ~V 1I M LM - "Mn C A M lr T frII* "a-UYV - CKi '..-I% ULCL .Ki?~s 1 ~ rIJlE #~P wsn '
CALCULATION OF AILLOWABLE BUCKLING STRESSES - REFUELING CASE, NO SAND ONE FOOT INCREASE IN FIXITY CASE; STRESS RUN OCRFRLSB.OUT, BUCKLING RUN OYCRSBBK.OUT LOAD ITEM PARAMETER UNITS VALUE FACTOR
------------------------ ------------------------------------------------ ------- ------- ------ *** DRYWELL GEOMETRY AND MATERIALS I Sphere Radius, R (in.) 420 2 Sphere Thickness, t (in.) 0.736 3 Material Yield Strength, Sy (ksi) 38 4ý Material Modulus of Elasticity, E (ksi) 29600 5 Factor of Safety, FS - 2 1*** BUCKLING ANALYSIS RESULTS 6 Theoretical Elastic Instability Stress, Ste (ksi) 50.394 6..739 *** STRESS ANALYSIS RESULTS 7 Applied Meridional Compressive Stress, Sm (ksi) 7.478 8 Applied Circumferential Tensile Stress, Sc (ksi) 3.885
- CAPACITY REDUCTION FACTOR CALCULATION 9 Capacity Reduction Factor, ALPHAi .0.207 10 Circumferential Stress Equivalent Pressure, Peq (psi) 13.616 11 'X' Parameter, X= (peq/4E) (d/t)A2 - 0.075 12 Delta C (From Figure - ) - 0.064 13 Modified Capacity Reduction Factor, ALPHAi,mod - 0.313 14 Reduced Elastic Instability Stress, Se (ksi) 15.753 2.107
*** PLASTICITY REDUCTION FACTOR CALCULATION 2.5 Yield Stress Ratio, DELTA=Se/Sy 0.415 16 Plasticity Reduction Factor, NUi - 1.000 17 Inelastic Instability Stress, Si = NUi x Se (ksi) 15.753 2.1.07 *** ALLOWABLE COMPRESSIVE STRESS CALCULATION 18 Allowable Compressive Stress, Sall= Si/FS (ksi) 7.877 1..053 19 Compressive Stress Margin, M=(Sall/Sm -1) x 100% (%) 5.3 C.
REF'NSND2 . WKl . AM mM- m mm - - m
d i m m Mm m I i -m M W M APPLICANT'S EXHIBIT 40 An Exelon Company Oyster Creek License Renewal Presentation to ACRS Subcommittee January 18, 2007 I
AmerGen An Exelon Company AmerGen Representatives
- Fred Polaski " Dr. Hardayal Mehta
- John O'Rourke " Barry Gordon
- Howie Ray " Jon Cavallo
- Pete Tamburro " Ahmed Ouaou 2
- M M m M a - M - - - m
'An m M -M M
AmerGen, ExdorCompanY A genda Drywell Shell Corrosion - Physical Overview - Cause and Corrective Actions - Drywell Shell Thickness Analysis - Sand Bed Region - Embedded Portions of the Drywell Shell - Upper Shell 3
C-) cn CD<
~~CD Q__ --
Cf) -,iCD CD - oO 0
> U 00m C') ý :A _
0 0C
mm~m~~ - - AmerGen , SEE DETAIL 'A' An*
- x~lor' Cornp~rft ut',i Rf AC' MH %PtNI 1Ut P9,)
PO i i Ii SEE DETAIL 'B' EL52-9 i -6 11 y/n, 6j V' 7/WF IJ _jA nt- it 1/8" Ll .5 i SEE DETAIL 'C' tti 2.1 1 5
fl AmerGen,, , An 'Lion Ccmpdnýl Lr'. 4 REAC 10 P q4 CAVITY S;TAIN- F, S S T FF{ INFR
@-o C'ONCP\[TIC -
4 J SEE DETAIL "B" I
.4 RK-AC~1 OR VLSS11,
{~) 5, 4. DRYWELL AND REACTOR CAVITY SECTION DETAIL "A" 6 - m mM m ý W w w m-m m w m m m m - m
m m -m m mm m ma- nmu m m m n AmerGen TOP PLATE Al ":e1onCcmpany F~l rAieArllr PAYW DRYWELL TO REACTOR CAVITY SEAL DETAIL DETAIL 3B' OBSERVED DAMAGE AT LIP OF TROUGH CORRECTD IN 1988 7
AmerGen,, LOWER DRYWELL/SANDBED REGION NOTE: LEAKAGE PATH FROM OUILEP DRYWELL TO OUTER DETAIL C SANDPFFD SHFIl[
//
SANDULD bRLGI0N Ft, 12' :5" TOP OF 3ANDBF'D
................. & UPPER CUR-I 6 IORYWFI L ýý lO'T1M 0SANUBED tYLN JNLI ;i:KE. '4 il o
tl 4.4 4 4 4 4 44
\=I =P4 4 4 4*
4 4 4
- . A * . S v d
- 44 1' ~.
.4 4 4 44 4 4.~
8 m - i m m m muo- m m= m nm m m m m
- mr Im - ilil m m*Inl AmerGen,, REACTOR BUILDING, DRYWELL SUPPORT STRUCTURE 4n [~lo" Eomnwn' CONTAINMENT Sl IE-L - -- ---- SANDBEED RECION-'- GRADE E.. 23' 6"
&REACTOR VESSEL. CURB-D R'W-.* 1F-LOO0 , / .... V F, 10'-3" STILL SKIRT I ORRIS MEMBRANE WAIEAHRCOFINC .4 *4 * 'N -E-. 4'-E"
- 4. 414~ 4J.41 4.
- 4,
~ 4 I~ 4 - MEMBRANE WATERPROOFING (TYP ALL AROUND)
- 1~ .:.
ICONCRMT 1
- ~ ~ ~: WATER STOP (TYP)
K I 41
- -4' ~ .' ýý"TYCONJ I'USINGJ AL AHOJN )
DRAIN V ~ 4,.a. 41 OF. 4 4 4 441L* CALLON
'0 -0" 4 *1 4 4 It M6 '4 1
- 4 .4 4 1 4 4 0-Y BOTLE
.4 f*f*
I -~ L-MLM,3ANL WA-ERPROOrI NG rVFl INC Sl Ar 9
DRYIvVFH AmerGen An Exelon Company I~ aLADING'M INTI A~
"IUTREADINGS IN THISAREA EL. 51=ý"EL.87"5 PL T.770 IK ° THESE AREAS 7O Fl, 51'-10", TO EOF S0['-!0" P7 HK .154" UT RFADTNGS IN THIS ANFA PLTHK .676 LL-.2 ..
10
-T R I -N - - -770"
- - - - - m - - mm - AmerGen An [xelon Company Corrective Actions Cause and e Water accumulation in the sand bed region resulted in corrosion of the exterior surface of the drywell shell
- Corrective actions were completed in 1992
- Prevented water intrusion into the sand bed region - Eliminated corrosive environment by removing the sand - Coated the drywell shell with epoxy in the sand bed region 11
AmerGen,. An Exelon Company Verification and Monitoring In 2006 refueling outage
- Leakage from the reactor cavity liner, estimated at about 1 gpm, was captured by the drainage system - UT measurements of the drywell at 19 monitoring locations for the sand bed region showed no change in thickness - 100% visual inspection of the epoxy coating showed it to be in good condition - There was no water in the sand bed region 12 MMM mo M mo mm MW mM mOO-
m mo - m mmm mm m AmerGen Monitoring An[xeloCompany Verification and In 2006 refueling outage - 106 UT measurements at locations measured in 1992, before epoxy coating applied, showed the drywell shell exceeds design thickness requirements - UT measurements at 13 locations in the upper elevations of the drywell show only 1 location with minimal ongoing corrosion (meets minimum required through 2029 with margin) 13
AmerGen,. 4n Exeon Company Drywell Shell Current Condition Nominal Minimum Minimum Minimum Drywell Design Measured Required Available Region Thickness, Thickness, Thickness, Thickness mils mils mils Margin, mils Cylindrical 640 604 452 152 Knuckle 2,625 2,530 2260 270 Upper 722 676 518 Sphere 158 Middle 770 678 541 137 Sphere Lower Spher 1154 1160 629 531 Sphere Sand Bed 1154 800 736 64 14 m 0 Mm n
n=on m m "m nm mm mm m w m-m n w Ameroen,.,, An Exelon Company Drywell Thickn ess Analysis Hardayal S. Mehta, Ph.D., P.E. General Electric 15
Drywell Analysis 0 AmerGen,,M Aneron An Exelon Company
- Analysis completed in early 1990s
- Without sand in the sand bed " Modeling of the drywell - Loads and Load Combinations " Buckling analysis - Controls the required drywell shell thickness in the sand bed region - Uniform drywell shell thickness of 736 mils over the entire sand bed region was used in the analysis " ASME Section VIII stress analysis based on 62 psi " Drywell pressure design basis change from 62 psi to 44 psi - Stress analysis of the drywell shell based on 44 psi 16 m-i m mD-- M mom m ,
- m w m m m -
m m m m = m m AmerGen,,, An Exelon Company Modeling of the Drywell 17
Drywell Configuration AmerGen,,,
- Oyster Creek Drywell Geometry AnExeln Company
- It is 105'-6" high - Drywell head is 33' in diameter - Spherical section has an inside diameter of 70' - Ten vent pipes, 6'-6" in diameter, are equally spaced around the circumference to connect the drywell to the vent header inside the pressure suppression chamber - Drywell interior filled with concrete to elevation 10'-3" to provide a level floor - Base of the drywell is supported on a concrete pedestal conforming to the curvature of the vessel - Shell thicknesses vary
- Drywell shell, i.e., the sphere, cylinder, dome and transitions, was constructed from SA-212, Grade B Steel ordered to SA-300 spec.
18 mm -- m M-a
AmerGen, Finite Element Models Used AnExelonCompany
- Axisymmetric, Beam and Pie Slice models used Axisymmetric drywell model used to evaluate
- Unflooded and flooded seismic inertia loading - Thermal loading during postulated accident condition
- Beam drywell model used to evaluate stresses due to seismic relative support displacement
- Pie slice drywell model used for the Code and buckling evaluations
- Vent lines included in the model
- No sand stiffness considered in any of the models 19
AmerGen,,, An Exelon Company Pie Slice Model and Load Application
- Taking advantage of symmetry of the drywell with 10 vent lines, a 36 degree section was modeled
- The model included the drywell shell from base of the sand bed region to the top of the elliptical head and the vent and vent header - Drywell shell thickness in the sand bed region: 736 mils uniform 20
= m M ma -Mt M M M- -ý
mm m -lm m
- m mm m- - - -l m u AmerGen,,,
Pie Slice model
- Vac 4 +/-PVV*
RZIPL "U"* vu 21
-Z-n ( rflrLL OIAv !3 O
- C", CARD, ~
21
AmerGen, An Eelon Company Applied Loads
- Gravity loading consists of dead weight loads, penetration loads, live loads
- Design pressure of 62 psi pressure (at 1750F)
- Note 62 psi criterion was later changed to 44 psi per Tech.
Spec. Amendment #165 (SER dated September 13, 1993)
- Seismic Loads
- Inertia loads - Relative support displacement (Drywell and Reactor Building) 22
AmerGen , Seismic Load Definition An Ex0Company 0 Axisymmetric finite element model used to determine inertia loading
- Drywell is constrained at the "reactor building/drywell/ star truss" interface at elevation 82'-6" and at its base 0 Spectra at two locations: At the mat foundation and at the upper constraint 0 Envelope spectrum used in ANSYS analysis 23
AmerGen,,, An Exelon Company Load Combinations and Constituent Loads Load Combination Constituent Loads Normal Operating Gravity loads+ Pressure (2 psi external) + Seismic (2 x DBE) Condition I Refueling Gravity loads + Pressure (2 psi external) + Water load Condition +Seismic (2 x DBE) Accident Gravity loads + Pressure (62 psi @ 175 deg. F or 35 psi @ Condition 281 deg.F) + Seismic (2 x DBE) Post-Accident Gravity loads + Water Load to El. 74' 6" + Seismic (2 x Condition DBE) 24 Sm - - m m-n m m m
MIm - M M - M -M Mmnn AmerGen,, An Exelon Company Buckling Analysis 25
AmerGen An Exelon Company Buckling Analysis Conclusion 0 The buckling analysis was conducted using a uniform drywell shell thickness in the sand bed region of 736 mils. 0 Stress limits and safety factors are in accordance with the Code requirements.
- The analysis shows that the drywell shell meets ASME Code Case N-284 requirements considering all design basis loads and load combinations.
0 A locally thinned 12"x 12" area down to 536 mils was evaluated and determined not to have significant impact on buckling.
- The drywell shell thickness will be monitored using 736 mils as acceptance criteria for the minimum required general thickness and 536 mils as the minimum required local thickness.
26 -. mm- m - -m m n m -, -- - m m -ml
merGen Buckling Analysis Details An Exelon Company 0 Basic approach used in buckling evaluation followed the methodology outlined in ASME Code Case N-284 Allowable Compressive Stress a rja ip,/FS
- FS is factor of safety (equal to 2.0 for refueling condition and 1.67 for post accident condition) 0 Boundary conditions for buckling analysis - Symmetric at both edges (sym-sym) - Symmetric at one edge and asymmetric at the other edge (sym-asym) - Asymmetric at both the edges (asym-asym) - This captures all possible buckling mode shapes
- A uniform drywell shell thickness in the sand bed region of 736 mils was used in the buckling analysis 27
AmerGen. Buckling Analysis Details Anoii omal Center of Orywell Sphere \ ., Planes of P Symmetry 36_
/ " / I\
Unbuckled Shape Buklded Sh~ape Vent (Radal Displacement No R~otation)
\
Buddcing of Drywe!o Symmetric 28 - a - a a m a a a - a a a - a aM aM aM aMl
M M M M Mm- m M M mM M Mm M M M M M M M AmerGen An Exeon Cornpany Buckling Analysis Details Center of Drywel 8p0",e Planes of Symmetry Lh"Wb*e Shape Bucked Sh*ae Vent (NORotation,Ds~p.. koRacial Asymmetric Budding of DryweU 29
AmerGen,. An Exelon Company Buckling Analysis Details
- Limiting load combination is the refueling condition
- Loads during refueling condition are
- Gravity loads including weight of refueling water - External pressure of 2 psig - Seismic inertia and deflection loads for unflooded condition 30
n -= = -= n -= = = m = m- m m m- m AmerGen Buckling Analysis Details An [elon Cop ' ANSYS 4,4A OCT 21 1592 7:44:41 POSTI S1*SS STEP-1 ITER-I FACT-S.141 Um o QLOBAL DKX -0.6033S4 SHN --0.00123 SKX -0.001441 XV -I ZV -- I
*OIST-110.243 *XF -35.968 *YF -- 1.382 *ZF -3f2,436 AMGZ--90 - -a.861556 - -0.807E-03 -0.432E-03 ri 0.317E-03 U.bM74L1 0.692E-03 0.001066 0.001441 Shape - Refueling Case IOS1ER CREEK URYVLLL AMALYSIS - OCRWL SVM-SYN (NO SAND, REFUeLiN) 31
Buckling Analysis Details AmerGen An lo iia 1 -ANSYS 4.4A POST1 STRESS FACT=6. 231 DXGLOBAL V=-O.e MOIST=58.23 OXF =Z .
-0.00202?
I0.7e)29 Figure 3-19 Sym-Asym Buckling Mode Shape - Refueling Case OYSTER CREEK DRYWELL - ASYM - SYM , NO SAND, REFUELING 32 mmm nm m -m - n m - m m m m
n= =m -m m - - m -= = M= m= = Buckling Analysis Details AnerGenm An Ixelon Conipany Summary of Buckling Analysis Results - Refueling Case Paraineer Val ue Theoretical Elastic Instability Stress, aie (ksi) 46.59 Capacity Reduction Factor, ai 0.207 Circumferential Stress, cc (ksi) 4.51 Equivalent Pressure, p (psi) 15.81 "X" Parameter 0.087 AC 0.072 Modified Capacity Reduction Factor, ctl,mod 0.326 Elastic Buckling Stress, a.e W ai,mod Yie (ksi) 15.18 Proportional Limit Ratio, A Oe/ Oy 0.40 Plasticity Reduction Factor, ,~i 1.00 Inelastic Buckling Stress, 01 C ni Oe (ksl), 15.18 Code Factor of Safety, FS 2.0 Allowable Compressive Stress, aall ai/FS (ksi) 7.59 Applied Compressive Meridional Stress, am (ksi) 7.59 33
AmerGen,,,, An Exelon Company Evaluation of Local Thinning on Buckling Analysis - Sensitivity Study A locally 12"x12" thin area was modeled in the sand bed region drywell shell in the highest stress area, to determine the impact of local thinning on buckling stress
- Establish minimum required local thickness down to 536 mils Note: UT thickness measurements taken through 2006 show that locally thinned areas of the drywell shell are not coincident with high stress areas. The locally thinned areas are typically scattered below and near the vent headers. These areas are not highly stressed because of the additional stiffness provided by the vent header.
34 M M M- M M M M M - - M M M m
m - m m m m m m m m m - m - - m m m m AmerGen, An Exelon Com~pany Buckling Analysis Conclusion 0 The buckling analysis was conducted using a uniform drywell shell thickness in the sand bed region of 736 mils.
- Stress limits and safety factors are in accordance with the Code requirements.
0 The analysis shows that the drywell shell meets ASME Code Case N-284 requirements considering all design basis loads and load combinations.
- A locally thinned 12"x 12" area down to 536 mils was evaluated and determined not to have significant impact on buckling.
- The drywell shell thickness will be monitored using 736 mils as acceptance criteria for the minimum required general thickness and 536 mils as the minimum required local thickness.
35
AmerGen9,,, An Exelon Company ASME Section VIII Stress Analysis 36 m m m m m m m mm - m - mm m m m m m
m mm-mn m m m m - m m m - -- - m - AmerGen ASME Section VIII xelon Company Stress Analysis Conclusion a Stress analysis of the drywell shell was conducted in accordance with ASME Code and SRP 3.8.2 using reduced thicknesses due to corrosion. 0 Stress limits and safety factors are in accordance with the ASME Code requirements. 0 The analysis shows that the drywell shell meets ASME Code Stress requirements considering all design basis loads and load combinations.
- To regain margin, a plant specific analysis was conducted that reduced drywell design basis pressure from 62 psi to 44 psi (Tech Spec Amendment #165)
The reduction in pressure resulted in a stress reduction of up to 5200 psi The minimum required general and local drywell shell thicknesses were calculated in accordance with ASME Code based on 44 psi pressure. The drywell shell thickness will be monitored for corrosion using the calculated minimum required general and local thicknesses as acceptance criteria. 37
AmerGen Codes and Standards Anel1n Conpany 0 The Oyster Creek drywell vessel was designed, fabricated and erected in accordance with the 1962 Edition of ASME Code, Section VIII and Code Cases 1270N-5, 1271N and 1272N-5
- Original Code of record and Code Cases do not provide specific guidance in two areas
- For the size of the region of increased membrane stress, guidance sought from Subsection NE of Section III
- For the Post-accident stress limits Standard Review Plan Section 3.8.2 was used as guidance 38 M M M M M M M M M M M M m M M M M M-M
M - - - - M - M - =- M M W = M =- - - AmerGen,,, An Ebelon Company Drywell - Section VIII Allowable Stresses Drywell Allowable Stresses Stress Allowable Stress Values (psi) Category All Conditions Except Post-Accident Post-Accident Condition* General Primary 19300 38000 Membrane General Primary 29000 57000 Membrane Plus Bending1 Primary Plus Secondary 52500 70000
- Allowable values based on Standard Review Plan Section 3.8.2, Steel Containment 39
Code Stress Evaluation Results AmerGem, (based on 62 psi, 1993) An Exelon Companiy Primary Stress Evaluation Drywell Calculated Allowable Region Stress Category Stress Stress Percent Magnitude (psi) (psi) Margin Cylinder Primary 19850 21200* 6 (t=0.619 in.) Membrane Primary 20970 29000 28 Memb.+Bending Upper Primary 20360 21200* 4 Sphere Membrane (t=0.677 in.) Primary 28100 29000 3 Memb.+Bending Middle Primary 19660 21200* 7 Sphere Membrane (t=0.723 in.) Primary 24610 29000 15 Memb.+Bending_ Lower Primary 13940 21200* 34 Sphere Membrane (t= 1.154 in.) Primary 17640 29000 39 Memb,+Bending Sand Bed Primary 16540 21200* 22 (t=0.736 in.) Membrane Primary 23130 29000 20 Memb.+Bending
- This is (1. lx1 9300) and is the threshold for local primary membrane stress per NE-3213.10 40 m m m- m m - m - mM - m
m - -mm m - m - -m -m m -- m--- AmerGen Regain Margin through An*xe,00mp Licensing Basis Change
- The drywell pressure of 62 psi was very conservative
- Analysis was conducted in early 1990's to establish Oyster Creek specific drywell design pressure.
- Design pressure changed from 62 psi to 44 psi.
44 psi is based on conservatively calculated peak drywell pressure of 38.1 psi plus an added 15% allowance.
- The change was approved by NRC per Technical Specification Amendment No. 165 (SER dated September 13, 1993). - The reduction in pressure resulted in a pressure stress reduction of up to 5200 psi
- Recalculated the required drywell shell thicknesses based on 44 psi to regain thickness margin.
41
AmerGen, Xý cill,ýJrlv Primary Membrane Stress Comparison 62 psi vs. 44 psi As-analyzed Calculated Allowable Stress Drywell Time Thickness Stress Stress (psi) Stress (psi) Margin (%) Frame (mils) Category Region 1993 619 Primary 19,850 21,200 6 Cylinder Membrane 2006 604 Primary 14,446 19,300 25 Membrane 1 1993 677 Primary 20,360 21,200 4 Upper Membrane Sphere 2006 676 Primary 14,796 19,300 23 Membrane 1993 723 Primary 19,660 21,200 7 Middle Membrane Sphere 2006 678 Primary 15,499 19,300 20 Membrane 1993 1154 Primary 13,940 21,200 34 Lower Membrane Sphere 2006 1154 Primary 10,660 19,300 45 Membrane Primary 16,540 21,200 22 Sand 1993 736 Membrane Bed 2006 736 Primary 11,404 19,300 41 Be_ 2006 736 Membrane 42 - --- mm- ml - m mm -m -m m -
- - - m - m -mn -n -;u -- m -- m AmerGen, Anelon Conpany Minimum Required Drywell Shell Thickness
- Minimum required general thickness for 44 psi
- Calculated based on primary membrane stresses for 62 psi, adjusted for pressure reduction (62 psi to 44 psi)
Minimum required local thickness for 44 psi
- Calculated based on ASME Section III provisions which allow increase in allowable local primary membrane stress from 1.0 Smc to 1.5 Smc - Local thickness criteria is applicable to an area of 2.5" in diameter and less consistent with ASME Section III, Subsection NE-3332.1 - Extent of Locally thinned areas is evaluated per ASME Section III, Subsection NE-3213.10, NE-3332.2, and NE-3335.1 43
AmerGen,. Minimum Required Thicknesses AP Exelon Compaqy Based on 44 psi pressure Drywell Design Minimum Minimum Minimum Region Nominal Measured Required Required Local Thickness, General General Thickness, mils mils Thickness Thru Thickness, mils 2006, mils Cylinder 640 604 452 301 Upper 722 676 518 345 Sphere Middle 770 678 541 360 Sphere Lower 1154 1160 629 419 Sphere Sand Bed 1154 800 479(1) 319(2) (1) The minimum required general drywell shell thickness in the sand bed region is 736 mils, controlled by buckling. (2) Acceptance criteria for evaluating locally thinned areas of the drywell shell in the sand bed region is conservatively based on 490 mils instead of 319 mils 44
ASME Section Vill AmerGenP, An Exelon Company Stress Analysis Conclusion " Stress analysis of the drywell shell was conducted in accordance with ASME Code and SRP 3.8.2 using reduced thicknesses due to corrosion. " Stress limits and safety factors are in accordance with the ASME Code requirements.
- The analysis shows that the drywell shell meets ASME Code Stress requirements considering all design basis loads and load combinations.
- To regain margin, a plant specific analysis was conducted that reduced drywell design basis pressure from 62 psi to 44 psi (Tech Spec Amendment #165)
- The reduction in pressure resulted in a stress reduction of up to 5200 psi
" The minimum required general and local drywell shell thicknesses were calculated in accordance with ASME Code based on 44 psi pressure.
- The drywell shell thickness will be monitored for corrosion using the calculated minimum required general and local thicknesses as acceptance criteria.
45
AmerGen An Exelon Company Sand Bed Region 46 =m I m m M m m m m m I M-M m m m m m
AmerGen,, An Exbon Company Sand Bed Region Conclusions
- Corrosion on the outside of the drywell shell in the sand bed region has been arrested
- The coating shows no degradation
- There is sufficient margin to the minimum thickness requirement (64 mils margin above code required average thickness of 736 mils) 47
AmerGen, Background and History AExelon Company Sand Bed Internal UTs 1983 to 1986 corrosion data 3600 at elev. 11'3"
- When thin locations were identified, UT measurements were taken horizontally and vertically to locate the thinnest locations - UT grid measurements were taken at the thinnest locations - 19 locations were selected for corrosion monitoring based on over 500 initial data points measured - At least one grid is located in each of the 10 bays 48 m m M -
M m m= m m m m m M
m mmmm -- m m -m m - m m mm on lprlpý" An [X:dle LL, W'-2" (4.ý)) pi 6f n' n (in) H>-
.4 m
EL 87' 6 (11) Kctt NLM~tHS IN PARf-NtHt<S-S H~r-tR TO IHý AtItArJL' QR~AIHIHN H ICATON NUM1MLIS KEY PLAN 49
VIEW FROM INSIDE DRYWELL AmerGen An Exelen Comrany UPPER CURB - EL. 12'-3' TOP OF SANDBED 41
,4 I/ I A I< A*
4 A 41 EJEJEJEB LOWER CURB A ,4 4 4 - .A 11,-On A . ~~ I DRYWELL FLOOR - EL. 10'-3' 50 m -i l = m l m -= m m m = -m m m m
--------------- ,
1An[xelon Conipanyý
'4 TOP OF SANDBED EL. 12'-5" & UPPER CURB LOWER CURB EL. 11-0" DRYWELL-WALL / . A" ,,-- FLOOR EL. 10O'-3" .
4 A 4 4. 4q. .1
. 4 A 1 %
RECION
."
- 4 A
4 "'I--E L. 8'-9" I
.I EXCAVATION .4 . . a 4
41 Y 5 -A TR NC A A° BAY 5- TRENCH 'A A A A 44 . . A A4 ,. A . . A 4 A. A 4 4 A A A1 ,1 A 4 A .. 4. 4 A.A 51
AmerGen. AnExelon Company TOP OF SANDBED EL. 12'-3" & UPPER CURB LOWER CURB EL. 11 '-0"--.\
- DRYWELL WALL A
FLOOR EL. 10' A A 4 .4.
- 4. 4 .4 44
- 4. ~ 4
. 4 .j SANDBED REGION EL. 9'-3"/ .4 4 4 `84* ,*,dl A. 4 4~4 .4* '
4 a 4 A, dn 44.4 A, 4*4 4 BAY 17-TRENCH BAY 17
- .
' * .,* ". . ,* ; " , . , * , ,* . . .4 .44 4 ,A, < , .. A, 44.. 4...
4* I 52 m m m m mmmm m m m m m m m m
Sand Bed Region Background and History Trenches in bays 5 and 17 were excavated in 1986 to determine corrosion in sand bed at elevations below the drywell interior floor
- Bays 5 and 17 were selected because UT measurements indicated these bays had the least and the most corrosion, respectively - The trenches extend to about the elevation of the bottom of the sand bed - UT measurements taken in the trenches confirmed that the corrosion below elev. 11' 3" was bounded by the monitoring at elev. 11' 3" 53
AmerGen,. An Exelon Company 2006 Inspection Data General Thickness (mils) Bay 5 Bay 17 17/19 Grid 5D 17A Top 17A Bottom 17D 17/19 Top Bottom Grid Elev. 11'3" Above Lower 1185 1122 935 818 964 972 Curb Trench Lower Curb to Sand Bed 1074 986 Floor Trench Below Sand Bed Floor 54 M M m M mM M M m M M M M M ý M M M
AmerGen, Sand Bed Region 4Ixelon Company Background and History
- Sand was removed in 1992 and the shell was cleaned
- External UT measurements were taken in all bays at thinned local areas (as determined by visual inspection)
- The shell was coated with epoxy coating
- UT grid measurements were taken at the 19 monitored locations at elev. 11 '3" as a baseline for the new condition 55
AmerGen An Exelon Company Condition of the Drywell Shell in the Sand Bed Region After Sand Removal 56 M m m m mn m m M nm n M
- m m m m m -- m m m m m Sa nd Bed Region 1992 AmerGen Drywell Shell Corrosion product on drywell vessel 57
Sand Bed Region 1992 AmerGen I,0,*,*,, As found condition of floor bed 58 l =m m m - m = m m- -= m mim- m m
mm l m m m -l m - --- m m = -= - AmerGen, An [xelon Company Condition of the Drywell Shell in the Sand Bed Region After Application of Epoxy Coating 59
Sand Bed Region 1992 AmerGen An Lxelor Compafly Shell Sandbed Floor Bay 5 before shell coating 60 m = m mM m m m IM- = M m m M m m m
= = = = = m - m -M m - = m= m = m m Sand Bed Region 1992 AmerGen Anfxelon Lompany
- Shell Floor Shell and floor undergoing coating and repairs 61
AmerGen,,, Sand Bed Region 1992 An [xelon Comqarit Shell Caulk Seal Sandbed Floor Finished floor, vessel with two top coats - caulking material applied 62 M M M M M Mm M M M M M M M - M m m m
M M M M M M m mM M M M M M M M m n AmerGenCp An Exelon Compan Sand Bed Region Background and History
- DEVOE Epoxy coating system (3 part)
- Designed for application on corroded surfaces One coat DEVOE 167 Rust Penetrating Sealer " Penetrates rusty surfaces " Reinforces rusty steel substrates " Ensures adhesion of Devran 184 epoxy coating 63
AmerGen,M Sand Bed Region Afl Exelo Company Background and History DEVOE Epoxy coating system
- Two coats Devran 184 epoxy coating " Designed for tank bottoms, including water tanks, fuel tanks, selected chemical tanks " Coating application was tested in a mock-up for coating thickness and absence of holidays or pinholes " Two coats used to minimize any chance of pinholes or holidays " The two coats are different colors 64
-M M M M m m m - M - mM M M M m
= = = =n- m m = =m m = m n m m mm AmerGenm kA Exelon Company Use of Coatings to Prevent Corrosion Jon R. Cavallo, PE, PCS Vice President Corrosion Control Consultants and Labs, Inc. 65
AmerGen Background and History An Exelon ompany The OCNGS Protective Coatings Monitoring and Maintenance Program aging management program is consistent with NUREG 1801, Rev. 1 (the GALL Report), Appendix XI.S8
- NUREG 1801, Appendix XI.S8 only covers Coating Service Level I coatings
- In addition, the OCNGS Coating Monitoring and Maintenance Program includes the Coating Service Level IIcoatings applied to exterior of drywell in Sand Bed region 66
= =m m m = m - =M m - m - - m
-- m-m m-m mm-m--m--m--m- m m - AmerGenm Background and History An Exelon Company Inspection and evaluation of OCNGS external coated drywell Sand Bed region surfaces (Coating Service Level IICoatings) is conducted in accordance with ASME Section XI, Subsection IWE by qualified VT inspectors.
- Areas shall be examined (as a minimum) for flaking, blistering, peeling, discoloration and other signs of distress.
- The premise of ASME Section XI, Subsection IWE is that degradation of a steel substrate will be indicated by the presence of visual anomalies in the attendant protective coatings 67
AmerGen M An Exelon Company How Barrier Coating Systems Prevent Corrosion
- Barrier coating systems separate the electrolyte from the anodes, cathodes and conductors
" A barrier coating system has been applied to the steel substrate in the OCGS Sand Bed region 68 M m m M M M M M M M m m M m M m m
I M, M M M M M M M M M M M M M M M M AmerGenm An [el1on Comrpany Technical Review of 0CGS Sand Bed Region Coating System l The OCGS Sand Bed region barrier coating system consists of:
- Devoe Pre-Prime 167 penetrating sealer - Devoe Devran 184 mid- and top-coat - Devoe Devmat 124S caulk and is appropriate for the intended service 69
Technical Review of OCGS AnierGenSM Sand Bed Region Coating System An Exelon Company
- With periodic condition assessment and maintenance (if required), the OCNGS Sand Bed region coating system will continue to prevent corrosion of the steel substrate for the period of extended operation
- Oyster Creek inspected 100% of the Sand Bed region coating in 2006 and will inspect at least three bays every other outage, with all 10 inspected every 10 years
- The 10 year inspection periodicity cycle is appropriate and commensurate with the Sand Bed Region environment and industry experience
- EPRI 1003102, "Guideline on Nuclear Safety-Related Coatings" 70 M - M M-- - -- - M - mM M M M M M
-mmm mm M-- M= M M -- m W - mM Arneroen, An Exelon Company UT Thickn ess Measurements In the Sand Bed Pete Tamburro Oyster Creek Engineering 71
AmerGen An Exelon Company Background and History Sand Bed Region
- UT grid measurements were taken at the 19 monitored locations at elev. 11 13" as a baseline for the new condition in 1992 0 1nl 992, thinnest grid a verage thickness 800 mils vs. criterion of 736 mils 0 1nl 992, thinnest local reading 618 mils vs. criterion of 490 mils 72 M M IM M-- M mM *m- M - 1ý M im M M M
- - - m - m -M ý No m - M m M
Ameroenm An Exelon Company Background and History Sand Bed Region 0 19 grids repeated in 1994 and 1996
- Statistically, no changes in thickness were observed - Basis for corrosion "arrested" in the sand bed region, on outer surface of the drywell - Basis for NRC SER concluding that further UT measurements are not needed and visual inspection of the coating is sufficient i The 2006 UT measurements confirmed that corrosion has been arrested 73
AmerGenM UT Measurements of 6"x6" Grid An Exelon Company Sand Bed Region
" Measurement locations are marked on the inside of the drywell shell
- Use a stainless steel template with 49 holes to align the UT probe
- UT probe placed perpendicular to the surface to consistently obtain lowest reading
" A protective grease is applied to the 6"x6" grid during operation, and removed to take UT measurements 74 M 4M NNW AW vim M IfW IM6 N. M I m -
MO = m = M - M M = m1111 W m M M Statistical Methodology AmerGen,, An Exelon CorTmpay 49 UT readings are recorded over a 6" by 6" area. Diameter of each hole between 9/16" and 5/8". 1" (Typ.) 1/16" by 1/4" slit centered on middle row or column A stainless steel template is 1"f9 used to ensure that the readings (Typ.) are recorded consistently and in same location (+/- 1/16") every time. For each location, the mean and standard error and the thinnest of the 49 readings are calculated after each inspection. 6" (Typ.) 1" (Typ 75
AmerGen M Statistical Methodology An Exelon Company
- Because of roughness of the exterior surface of the drywell shell in the sand bed, there is uncertainty in the mean thickness calculated for each grid location
- The major contributor to the uncertainty in the means is the variance from point to point due to the rough surface and not inaccuracy or repeatability of the UT Instrumentation 76 4 M %= M -M l I M - - -
m - - .m - ---. -m m m xerGeno Statistical Methodology Aeahxloo Cotaspahe For each location the means and thinnest points are trended over time Today 0 0 I 0.0 Thickness O a Time 77
Statistical Methodology AnerGen
- 1) A curve fit based on the regression model is then developed. An Exelon Copany
- 2) The Corrosion "F" Test is performed to determine if the data meet the curve fit with 95% confidence.
"F" Test of Curve to 95%
x Confidence Thickness Curve Fit KEY
- mean value H - standard error Time 78 M M - m M M -No m M so O mM
M I M M M M M s " -M M M Projection Based on Successful Corrosion F tests AmerGen,,, An Exelon Company DFit Thickness Projected Margin in 2029 with 95% Confidence Time 79
2006 Sand Bed Data Summary AmerGen An Exelon Company 199;2 2006 In the case of the 2006 1996 sand bed inspections, 1994 there are only 4 inspections per location with most standard errors between +/- 8 and +/-16 mils There are not enough inspections to satisfy the Minimum Corrosion Test F test with Required 95% confidence. I KEY
* - mean value Time S- standard error 80 M W-ý M OW Im No -" M M N - M - Mmm
SmerGenm An Exelon Company Statistical Methodology
- We then employed a conservative statistical analysis based on a "Monte Carlo" type simulation to determine a minimum statistically observable corrosion rate for the purpose of ensuring adequate inspection frequency 81
Given only 4 inspections and the standard errors, AmerGen simulation was required to determine the minimum ni£'Xe~lr COrfjary observable rate with 95% confidence. This is not an actual rate! 1994 1996 2006 1992 Thickness II IL The simulation answered the question: What is the minimum rate that passes the F Test with 95% confidence given four inspections and most standard errors between 8 and 16 mils Time 82 M I= M ý mM n a g M
-- IM No- -w M M
-~n- M---- M- EM m m The simulation used a random number AnerGen, generator based on the normal distribution An [xelon CoPmpany Input Output Mean Standard Error,-'* 49 An array with 49 randomly generated values. The array is normally distributed with a resulting simulated mean and a resulting simulated standard error. 83
Simulation - Minimum Observable Corrosion Rate AmerGen Chose a rate and performed 100 Iterations (Steps 1 through 6) Ar xefl0t1T CU0aq'
- 1) Simulated mean for 1992 based on 49 generated random values.
Input to the generator is the grid 19A, 1992 mean and standard error.
- 2) Simulated mean for 1994 based on 49 random generated values. Input to the generator is: the 19A, 1992 mean minus the selected rate times 2 (1994-1992); and standard error.
/
- 3) Simulated mean for 1996 based on 49 random generated
,,-ývalues. Input to the generator is: the 19A, 1992 mean minus I the selected rate times 4 (1996-1992) and standard error.
1 mpy Thickness
- 4) Simulated mean for 2006 based on 49 random
- 5) Determine the curve fit generated values. Input to the generator is: the based on the 4 simulated 19A, 1992 mean minus the selected rate times 14 means and perform the I I (2006-1992) and standard error.
Corrosion"F" Test.
- 6) If the curve fit passes the "F" test than this iterations counts as a successful iterations.
84 1992 1994 1996 Time 2006 111w M M m m O 1111111M "m -
= M1M M M M M Mm mM m mW M M Simulation - Minimum Observable Corrosion Rate AmerGen Arl Lxelon Eornuaf1ý The minimum rate which consistently passes the Corrosion "F" Tests 95 out of 100 times is the Minimum Observable Corrosion Rate. 1992 Repeat each 100 iteration 2006 1996 simulation with increasing rates. 1994 Rate Number Successful "F" Test -19A Thickness - 22mpy 27
,5 mpy 55 5 mpy 80 6mpy 92
- 6. 9 mpy 96.2 7m 97 8 mp y Average -100 98 Iterations were repeated 10 times Time 85
Next Required Inspection Based on the Minimum Observable Rate AmerGen, :-Xtn corlpdry Arf 1994 2016 Based on this statistical 1992: 1996 approach, the next inspection shall be performed prior to this date Thickness Based on this statistical approach the most limiting locations are 19A and 17D with required inspection dates prior to 2016. Minimum Required Time Thickness 86 M M W M W M m MW M m-m M -am MMM
- M M M M M so M mmM M m M M am M a AmerGenm An Exelon Company Results of the Statistical S imulation e The most limiting locations are 19A and 17D, with required inspections prior to 2016
- Therefore, the next inspection scheduled for 2010 is appropriate
- Analysis after future inspections will be used to determine the appropriate inspection frequency 87
AmerGenM An [xelon Company 2006 Inspections Sand Bed Region
- Visual inspection of coating in all 10 bays (external)
- UT measurements of 19 grids at elev. 11'3" (internal) 0 UT measurements 106 locally thinned single point locations (external) 88 MMM"M MI M go no " - - -- - - - -
= m m w w ot m m M w No an m m m A..meroenm An [xelon Comnpany 2006 Inspection Results Sand Bed Region
- Visual inspection of External Shell Coating - no degradation 89
Sand Bed Region 2006 AmerGen An [xeloii Company Shell Caulk External UT Inspection locations Floor Bay 7 - Drywell shell, caulking, sand bed floor 90 S - m -m
Mao mmnmm
, --- mmmmm M mm Sand Bed Region 2006 AmerGen Reference for -locating inspection points External UT Inspection location ........... ...
me Bay 13 Drywell shell 91
Sand Bed Region 2006 AmerGen An Exelon Company Shell Floor Caulk Bay 19 caulking Drywell Shell Bay 19 92 -m m " m M ON m w m m m -Wl m m m m m
M M M M " M M M-AmerGenm An [xelon Company 2006 Inspection Results Sand Bed Region
- UT measurements at 19 internal grid locations
-No ongoing corrosion 93
General Thickness at 19 Grid Locations - erGe Location Pre- May Min. Nominal Margin 1992 1992 Sept. 1992 1994 1996 2006 Req'd Thick. Thick Std Error Thick Std Error Thick Std Error Thick Std Error ID 1115 1101 +/-10.0 1151 '136 1122 L8.4 365 3D 1178 1184 +/-4.9 1175 +/-7.5 1180 '5.7 439 5D 1174 1168 +/-2.6 1173 +/-2.2 1185 +/-2 432 7D 1135 1136 +/-4.3 1138 +/-5.9 1133 +/-6.5 397 9A 1155 1157 +/-4.5 1155 +/-4.8 1154 +/-4.2 418 9D 992 1000 1004 +/-10.0 992 +/-10.4 1008 +/-10.6 993 +/-11.2 256 11A 833 842 825 +/-8.2 820 +/-7.7 830 +/-8.7 822 +/-8.0 84 11C Bot 856 882 859 +/-64 850 +/-4.5 883 +/-7.4 855 +/-4.5 114 Top 952 1010 970 +/-23.8 982 +/-23.4 1042 +/-21.4 958 124.7 216 13A 849 865 858 +/-9.6 837 +/-7.8 853 18.8 846 +/-8.2 101 13D Bot 900 931 906 +/-9.0 895 +/-8.2 933 +/-9.6 904 +/-8.9 159 Top 1048 1088 1055 +/-14.1 1037 +/-13.6 1059 +/-11.2 1047 +/-13.7 736 1154 301 13C 1149 il.9 1140 +/-3.8 1154 +/-3.2 1142 +/-3.1 404 15A 1120 1114 +/-16.3 1127 +/-10.8 1121 +/-16.6 378 15D 1042 1065 1058 +/-8.7 1053 +/-9.0 1066 +/-8.5 1053 +/-8.9 306 17A Bot 933 948 941 +/-11.8 934 +/-10.7 997 +/-10.7 935 +/-10.5 197 Top 999 1125 1125 +/-7.2 1129 +/-6.8 1144 +/-11.1 1122 +/-7,2 263 17D 822 823 817 +/-9.2 810 +/-9.5 848 +/-8.9 818 +/-9.5 74 17/19 Top 954 972 976 L4.8 963 +/-4.9 967 +/-6.0 964 +/-4.8 218 Frame Bot 955 990 989 +/-6.3 975 +/-7.8 991 L6.2 972 +/-5.9 219 19A 803 809 800 +/-8.4 806 +/-9,9 815 19.6 807 +/-8.9 64 19B 826 847 840 +/-8.7 824 +/-7.8 837 +/-9.5 848 +/-8.6 88 19C 822 832 819 +/-11.0 820 +/-10.5 854 +/-11.8 824 +/-11,3 83 94 Note: Shaded cells indicate thickness value used to conservatively calculate the margin = M M " " .= M M s M nw = M M -w
M M ==M M"M M"M M MMM AmerGen C An Exelon Conpany Minimum Available Thickness Margins Bay No. 1 3 5 7 9 11 13 15 17 19 Minimum Available 365 439 432 397 256 84 101 306 74 64 Margin, mils 95
Figure 21 Sandbed Bay # 19A 1154 Mil Nominal Shell Plate Thickness 1200
'1000 U) -15 Mils/yr 800 8.4r nils +/- 9.9 mils +/- 9.6 mils " ---- +/- 8.9 mils 0 anU M U
Margin = 64 Mils 736 Mil General Required Shell Thickness 600 VV C C C C C C 1.4 -~ t 1 a,ON Drain Lines .-- Strippable Coating Cleaned Complete Sand Added to Rx Cavity Removal and apply 1aj15 Bayl? Start Sand Epoxy Coating 9aw13 Ow 1g Removal Strippable BWII awjl Strippable Coating Ctippale
"- Coating*:
Added to Rx Cavity :Not Used 8ayS 9ay3 saw 7 Bay 5 Kay Plan Source: Raw Data - Amergen Calculation C-1 302-187-5300-021, C-1 302-187-5300-028, C-1302-187-8610-030 96 M-M------
Figure 1. Sandbed Bay# 1 D 1200 1154 Mil Nominal Shell Plate Thickness U +/- 13.6 mils
+/- 10 mils +/- 8.4 mils 1000 £0 Margin = 365 Mils I--
736 Mil General Required Shell Thickness 600 AL i< Strippable Coating _ Complete Sand Added to Rx Cavity Drain Lines Removal and apply Cleaned Epoxy Coating Start Sand,' Bay15 Bay? Remnoval N B 1 Bay ig SStrippable Coating Strippable
, Added : to Rx Cavity : N-Coating ~Not Ud Used - I , *ay aI Bay 9 Bay 3 Bay? Bay 5 Plan KeBy Source: Raw Data - Am erGen Calculation C-1302-187-5300-021, C-i1302-187-5300-028, C-1 302-187-8610-97
AmerGen 2006 Inspection Results An Exelon Company External Sand Bed UTs 0 106 individual UT measurements were taken externally in the sand bed region 0 It was verified that all 106 measurements meet the local thickness requirements (both buckling and membrane stresses) 0 The 2006 measurements are not directly comparable to the 1992 results because of differences in measurement techniques 98 M mm s - ý m MM - M -M m M
m m- m m m m m mmmm m m = m m mm m m Inside Drywell AmerGen, An Exelon Companm Uncoated 1992 Traditional pulse echo technique Concave Curvature Effects 1992 vs. 2006 External UT Data (106) Sand Bed Readings Coating 99
AmerGen External UT Inspection Result-s An Iel1on Cornipny Location 1992 UT Measurements 2006 UT Measurements No. of No. of UTs Thickness in Thickness in No. of No. of UTs Thickness in Thickness in UTs <736 mils mils <736 mils >736 UTs <736 mils mils <736 mils >736 Bay 1 23 9 680 to 726 760 to 1156 23 10 665 to 731 738 to 1160 Bay 3 8 0 780 to 1000 8 0 764 to 999 Bay 5 8 0 890 to 1060 7 0 880 to 1007 Bay 7 7 0 920 to 1045 5 0 964 to 1040 Bay 9 10 0 791 to 1020 10 0 781 to 1016 Bay 11 8 1 705 755 to 850 8 1 700 751 to 830 Bay 13 29 9 618 to 728 807 to 941 15 6 602 to 708 741 to 923 Bay 15 11 1 722 770 to 932 11 0 749 to 935 Bay 17 11 1 720 760 to 1150 10 1 681 822 to 970 Bay 19 10 0 776 to 969 9 0 738 to 932 Total 125 21 1061 18 1The locally thinned areas prepared for UT measurements in 1992 were measured in 2006. However, the inspection team was able to locate only 106 points instead of 125. 100 Sm mm
AmerGen, 2006 Measurement Locations In the Sandbed Region Xl'*il* !rll*ir*v Color Code for thlcknim Location / TVDe of UT Meauremeit Green -UT Measurements
- 736 MIls A External Point UT Measurements Yellow- UT Measurements Between 636 end 736 Mils 1. Internal Grid UT Measurements Red mUT Measurem ents Betreen 536 and 636 MIls 0 Internal Point UT Measurements I
NY SAY 1 BAY 9 BAY 11 BAY 13 BAY 15 BAY 17 BAYI19 90Y.
-. 1- IT'- 3.
A A A 60 AF A A I-J Ui ,t4 11' -0" hA IAt A AA A A A A A 10' -3" A A D'-2" AV,r. e' - Il"
.x to ay Location (By Ninber) I "" P.)
- W*StI a' fl.=mn obW. V86 d1. Is~ .U~
AmerGen,, An Exelon Conmpany Sand Bed Region Conclusions " Corrosion on the outside of the drywell shell in the sand bed region has been arrested " The coating shows no degradation " There is sufficient margin to the minimum thickness requirement (maintain 64 mils margin above code required average thickness of 736 mils) 102 -~~~ - m Mi M
mm- m - m m m Mm AmerGenm Future Inspections in IxeorCompuy the Sand Bed Region
" Visual inspection of exterior coating in three bays every other outage, inspecting all 10 bays once every 10 years
- UT measurements at 19 grid locations at elev. 11 '3" in 2010, then every 10 years thereafter
- Repeat UT at 106 locally thinned locations from the exterior in 2008 outage
- In future outages, perform UT in 2 bays every outage 103
AmerGen M An Exelon Company Embedded Portions of the Drywell Shell 104 an ý M M M M M M M m M M M M M M Mre - w
n mmmmmmmmm m - m i - mmm -m AmerGen An Exelon Company Embedded Shell Conclusions
" Corrosion on the embedded surfaces of the drywell shell, both interior and exterior, is not significant - The environment of embedded steel in concrete prevents significant corrosion
- Estimated at <1 mil/year
" Drywell shell meets design basis requirements, with margin to 2029 105
AmerGenSM LOWER DRYWELL- An Exelon Company SANDBED, TRENCH & SUMP ELEVATION LOOKING WEST 106 m m n m m m = m- w m m ý " m m
M mm m m - m M - m MM - AmerGen An Exelon Company REACTOR BUILDING, DRYWELL SUPPORT STRUCTURE CONTAINMENT SHELL--- -__ EL. 23' GRADE EL. 23'-6" SANDBED REGION-D FREACTOR VESSEL CURB
-WATER STOP (TYP ALL AROUND)
DRYWELL FLOOR EL. 10'-3"
- PEGLET STEEL SKIRT EL. 5'-0" LIMMBO MEMBRANE WATERPROOFING . ._-------_-)- 1."--*
EL. 4'-6" TORUS ROOM K " *..... " DRAINAGEL CH-ANNE:LI
" *, .,
4"
, ,' m, - MEMBRANE WAIERPROOFING (TYP ALL AROUND)
PEDESTAL
.CONCRETE q4 * .? -WATER STOP (TYP)
ALL AROUND) L J
*N *F &IAT m r- (ur- MIAI 10,-0,i' .7. 1+ ,a * * " , . . -* : . " . * . .
a " ."
. * .
TC
*.... ".".CONCRETE MATI*,i ... 1/ . .*
_1_ I -~ MEMBRANE WATERPROOFING
ý -ILEVELING SLAB 107
AmerGen Ar [xeor Limpan, LOSUIL ILAIL SAND BED AREA 0.7/0" IHK PLAIL VENT PIPE (IM PLACES) TOP Oi SANDBLD & JPPLý' CWU3
/1 1.154" K PLATE .-.
RADIUJS -~193'-~) Ho i SIAHI i/IN( NG /- -- EL. 8 - i 16 -1i) /1 4 IIRAIN Pill I -0.676 IHK PLATL 0DYWLL 2' .5" 1/2" PLAIL DRYWELL SKIRT EL (-)0'-1" it:' SECTIONAL VIEW OF SAND BED AREA AT VENT PIPE 108 - m m m m m m m - -= m m m m
mm m m m= -m m -m
= - m m m m 270" EL. 87' 5" (13) , 7 AmerGen,,,,
An [elIon Corn p~n b m 4
&~AY ,9(
KEY PLAN 109
AmerGen , Embedded Shell - Exterior "'10D compny Surface Any corrosion of the drywell exterior embedded surface occurred because of water leakage into the sand bed region
- Corrective actions for the sand bed region arrested corrosion of the drywell exterior embedded shell
- Water leakage into the sand bed region was prevented - The joint between the drywell shell and floor of the sand bed region was sealed to prevent water from contacting the exterior shell 1"10 m
mm m m m mm um m m m1m1 0
nm m--u m - m -u m m - mm-mm mm AmerGenm An Exelon Company Embedded Shell Interior Surface Water that was identified in the trenches in bays 5 and 17 inside the drywell when the foam filling was removed during the 2006 refueling outage was determined to have originated from equipment leakage inside the drywell (Not from external sources) III
AmerGen,M An Exelon Company Embedded Shell - Interior Surface
" Investigations into the source of the water indicate that there could have been water below the drywell interior floor for an extended period " Additional concrete was removed from the bottom of the bay 5 trench to expose 6 inches of drywell shell that was embedded on both sides for UT thickness measurements of the drywell shell 112 m -m m m - -m m m - m -
mm-m*
AmerGen S An [xelon Company Embedded Shell Interior Surface Corrective actions during the 2006 refueling outage included
- Caulking the joint between the drywell interior floor and the drywell shell - Repairs to the collection trough in the sub-pile room 113
AmerGen An [xelon Company Corrosion of Steel Embedded in Concrete Barry Gordon Structural Integrity Associates Inc. 114 M M M mM m m m m mM M M m m M mM
m m mn mmn-m -m mm Lm-mm, - m- m AmerGen. Corrosion of Steel AeenIm Embedded in Concrete
- Drywell shell was constructed first, followed by pouring of concrete both on the inside and the outside of the shell
- The high pH (e.g., 12.5 to 14) environment created during hydration of the cement in the concrete results in the formation of a passive, protective film [Fe(OH) 2 +
Ca(OH) 2] on the carbon steel surface that mitigates corrosion in the absence of an aggressive environment 115
AmerGen Exterior Embedded Steel AnExelonConmpany Environment
- The reactor cavity water that flowed into the embedded region outside the drywell was affected by the sand bed
- However, the chemistry of the water leachate from moist sand from the sand bed region was measured in 1986 revealed high purity water:
- pH >7, <0.045 ppm CI- <0.032 ppm S0 4 (US Water: 59 ppm Cl-, 81 ppm S04=) - This water is not aggressive to the embedded steel in concrete per GALL/EPRI 116 m M m mM M mM m mM M M mM m M m m
m - m - m - - m - m - - ----- - m AmerGenS Exterior Embedded An Exelon Company Steel Environment
- The water in the embedded region would have been the same quality as in the sand bed region, except the pH would have been greater because of the interaction with high pH concrete pore water
- Per GALL NUREG-1801 Vol. 2, Rev.1 and EPRI 1002950, no aging effects are expected since pH>5.5, <500 ppm C- and <1500 ppm SO 4 =
(GALL ll.B1.2-2, II.B1.2-8) 117
AmerGen Interior Embedded AflExelon Company Steel Environment Chemistry of the drywell Trench #5 water (from equipment leakage) shows high pH, low Cl-, low S0 4= and high Ca:
- pH 8.4 to 10.2 (despite C0 2 ) (> GALL/EPRI limit) - CI-: 13.6 - 14.6 ppm (<< 500 ppm GALL/EPRI limit) - S04=: 228 - 230 ppm (<<1500 ppm GALL/EPRI limit) - Ca: 83.5 - 96.6 ppm (No GALL/EPRI limit)
- Water is characterized as good quality "concrete pore water" that mitigates steel corrosion
- Trench #5 water complies with GALL/EPRI embedded steel guidelines 118 M M S MmM M M M M m - - M m M M M
M M-m-m M m- - - M- mM mM M MM AmerGen, l Interior Embedded c*r*pafl An EXeQF Steel Environment
- Trench #5 water's high Ca indicates that the water slowly migrated through the alkaline concrete A..
- Any subsequent water ingress into the concrete floor will also become high pH concrete pore water 119
AmerGen, Interior Em bedded Ax00on Company Steel Environment
" Corrosion of the steel shell not wetted by high pH concrete pore water is mitigated by subsequent inerting of the drywell during operation " Any possible subsequent steel corrosion could occur only during brief outages when fresh oxygenated water can contact with the shell " Finally, transport of any oxygenated water through the concrete to the steel is slow, will increase in pH and must displace oxygen depleted water before any possible corrosion can occur 120
- - - - - - - - - m -n m - m
itmm - - - - m m- - --- mmm m m - - - - -m AmerGenm An Exelon Company 2006 Outage Inspections Embedded Shell
- Visual inspection of the surface in the trenches showed minor corrosion which was easily removed with no visible loss of material or degradation of the surface 121
AmerGen An Exelon Compafny 2006 Outage Inspections Embedded Shell LUT measurements in the trenches measure total corrosion on the inside and outside between 1986 and 2006
- Corrosion was occurring on the exterior surface that was not embedded until 1992 when sand was removed - Material loss was consistent with the corrosion rates on the outside of the drywell before the sand was removed 122 m M f - MM ý M ý- ý-- M M M - -
M
wlý M " M w - M -P- m 0- M M - AmerGen, 2006 Inspection Results An Exlon Company Embedded Shell UT measurements in trenches 5 and 17 1986 1986 Std. 2006 2006 Std. Thickness Error Thickness Error Trench 5 1112 mils +2.59 mils 1074 mils +/-2.66 mils 38 mils Trench 17 1024 mils +/-2.85 mils 986 mils +/-4.18 mils 38 mils 123
AmerGenSM 2006 Inspection Results An N°eonCompany Embedded Shell
- UT measurements of the 6 inch surface excavated in the bottom of the trench in bay 5 were performed to determine total corrosion, both interior and exterior
- Measured thickness is 1113 mils, as compared to a nominal of 1154 mils
- A change of 41 mils, approximately 1 mil/yr 124
mm n-- M N mo w m MM- M -go m M M. m M AmerGenSM An Exelon Company 2006 Outage Inspections Embedded Shell The 106 individual UT measurements made from the exterior of the sand bed region are a baseline for monitoring corrosion of the interior embedded surface of the drywell in future outages 125
AmerGenM An [xelon Company 2006 Inspection Results Embedded Shell
- The joint sealant between the sand bed floor and the exterior drywell shell was inspected and found to be in good condition
- No water was identified in the sand bed region in any of the 10 bays 126
- - -m -m m!,*: rn/ m -, m - - AmerGen,M An Exelon Company Embedded Shell Conclusions
" Corrosion on the embedded surfaces of the drywell shell, both interior and exterior, is not significant - The environment of embedded steel in concrete prevents significant corrosion
- Estimated at <1 mil /year
" Drywell shell meets code thickness requirements, with margin to 2029 127
AmerGen Future Inspections on the An xelonCompaq Embedded Shell
- Repeat UT measurements in both trenches, including the newly excavated 6 inches in 2008
- Ifresults indicate no significant changes, then fill the trenches with concrete and restore the curb to original configuration
- Repeat UT measurements at 106 external points in 2008
- Perform external UT measurements in 2 bays every refuel outage starting in 2010 - All bays will be inspected every 10 years 128 ON m
m m m m ON M - - -mmWdI OW. aw, *a m = = AmerGen An Exelon Company Upper Drywell Shell 129
AmerGen,. An Exelon Company Upper Drywell Shell Conclusions
- These measurements are the lead indicators of corrosion on the outside of the shell
- Corrosion of the upper shell is <1 mil / yr
- Upper Drywell shell has a minimum of 137 mils margin
- Based on current rates, will have margin through the period of extended operation 130 M - M m m M M O ;60 ,O M " m 'we M- l m m m
OmM Nam Im ME I= M- mý AmerGen,, Upper Drywell Shell
- Starting in 1983, over 1,000 UT measurements were taken to locate areas of corrosion on the exterior surface of the drywell shell
- 13 grid locations have been selected for monitoring e These locations are measured every other refueling outage 131
AmerGen F~b ýO7-ii An Exelon comvpany 10 " .... ... 9) IEL 5' 10" (89). ..
-L. 60' 10" (0) >-*
NQT'_ NUMULR6 IN k"AHLNIfASt5 R1ALF li ME Al IACi Ill GRAP~H Ifliki CM ION NUM13FRIS KEY PLAN 132 -M m " m m fIm m m m __L M mm
-m I- m - -- - - I m m -m AmerGen, Anbolon Compaql Upper Drywell UT Measurements Monitored Location Minimum Average Measured Thickness , -nmils Projected Elevation Required 'Thickness in Thickness 20129 in1ils 19X7 1988 1989 1990 1991 19ýý12 19931 1994 1 996 12000 12004 206oils Elevation 541 50' 2" Bay 5- 743 742 747 No Observable D12 745 745 747 741 748 741 743 747 Ongoing 746 748 Corrosion Bay 5-5H 761 755 759 No Observable Ongoing 761 758 759 754 757 754 756 760 Corrosion 7611 Bay 5-51 706 703 703 No Observable 703 705 70-2 702 705 706 701 705 Orrgoing 706 Corrosion Bay 13- 762 760 765 No Observable 31H Ongoing 779 758 763 759 766 765 762 758 762 Corrosion Bay 13- 687 689 685 No Observable 31L 684 678 688 683 690 682 693 678 Ongoisig 668 Corrosioi Bay 15- 758 762 767 23H 764 762 763 758 7601 758 757 765 Bay 15- 726 72t 726 749 720 23L 72- 7-9 724 728 724 729 727
- -2 - - --- 1 1 133
AmerGen, Upper Drywell UT Measurements An Exelon Company Minnmumn Projected Monitored Location Required Average Measured Thickness 1,2 mils Thickness in Elevation Thickness 2029 milS' 987 ,988 1989 1990 1991 1992 19931 1494 1996 12000 1 2004 1 2006 reils Elevation 518 51' 10" Bay 13- 716 715 717 No Observable 32H 715 717 714 715 715 713 715 Ongoing 720 Corrosion Bay 13- 686 683 683 No Observable 32L 683 676 680 684 679 687 685 Ongoing 682 Corrosion Elevation Bay I - 518 No Observable 711 {9 689 691 N9o Ongo Ig 60'IO 5022693 60 10" 1 1 13 6Corrosion Elevation Bay 9-20 452 619 622 619 620 614 629 No Observable 87' 5" 620 612 614 613 613 604 612 617 Ongoing Corrosion Bay 13- 643 641 645 643 635 641 No Observable 28 642 629 637 640 636 635 640 642 Ongoing Corrosion Bay 15- 638 636 638 642 628 631 No Observable 31 636 627 630 633 632 628 630 Ongoing Co--osion I Notes:
- 1. The average thickness is based on 49 Ultrasonic Testing (UT) measurements performed at each location.
- 2. Multiple inspections were performed in the years 1988, 1990, 1991, and 1992.
- 3. The 1993 elevation 60' 10" Bay 5-22 inspections was performed on January 6, 1993. All other locations were inspected in December 1992.
134 -, - --- ~
M ;,ý ý -m--- m . Mm M ---- M M M M 'M M M M AmerGen S Upper Drywell Shell 4nExeloCompafy 2006 Inspection Results
- 12 of the 13 locations show no statistically observable corrosion o The location with the minimum margin (137 mils) has no ongoing corrosion
- 1 location shows a corrosion rate of 0.66 mils/year
- Projected thickness in 2029 is 720 mils, compared to a minimum required thickness of 541 mils 135
AmerGen,M An Exelon Conipany Upper Drywell Shell Conclusions
- These measurements are the lead indicators of corrosion on the outside of the shell
- Corrosion of the upper shell is <1 mil / yr
- Upper Drywell shell has a minimum of 137 mils margin
- Based on current rates, will have margin through the period of extended operation 136
- mm-mm-_ - ,m - m -
. I - t - -.. m M l m M AmerGen Overall Conclusions M bxkonompany
- The corrective actions to mitigate drywell shell corrosion have been effective
- The drywell shell corrosion has been arrested in the sand bed region and continues to be very low in the upper drywell elevations
- The corrosion on the embedded portion of the drywell shell is not significant
- The drywell shell meets code safety margins
- We have an effective aging management program to ensure continued safe operation 137
- - m m m so som-APPLICANT'S EXHIBIT 41 AmerGen~
An Exelon Company Oyster Creek License Renewal Presentation to ACRS February 1, 2007 I
AmerGen, An Exelon Company Agenda
- Summary of Drywell Corrosion
- Resolution of Drywell Shell Corrosion Issues from January 18, 2007 Subcommittee Meeting e License Renewal Application Summary 2
M ý M m M =M =M M M s s s m M M
ON ý M = =m m m m m w w mM M m M AmerGen,, An Exelon Company AmerGen Representatives
- Mike Gallagher 9 Fred Polaski
- John O'Rourke
- Dr. Hardayal Mehta
- Dr. Clarence Miller
- Ahmed Ouaou 3
AmerGen SEE DETAIL A' q,lx~lo Cr"P')'I SEE DETAIL VB' CL 82,-0" H /I SEE DETAIL 'C"
! Lt 4
- i m m - m m m W -m
- m m --- n - -m n
~AmerGen,, 'I U
A\C IOk AV 1'Y I N KI~) STI SL-' BEIF[ (7 0W",P\ T F--~ H' "B ý 4 F&AC !OP Vr '> L d 03
'K, I,,
DRYWELL AND REACTOR CAVITY SECTION DETAIL "A' 5
I AmerGen,,,O PROTECTIVE SHELDING
-
LEAKAGE PATH -
-'--STAINLESS STEEL LINER DRYWELL TO REACTOR CAVITY SEAL DETAIL GUSSET<-
DETAIL 'B'
... REFUELING BELLOWS O ADRYWELL 7// / /ORRETIDEBAR-D BOTTOM PLATE SINSULATION MATERIAL OBSERVED DAMAGE I AT LIP OF TROUGHDRIFO CORRETED I 19USTEEL TROUGH (21 21 -- DRAIN FOR CONCRETE TROUGH (1) 6 l lm = - m m m m mmmmmm mm
Sm mm-mmmm m m m m m -m AmerGen,,
-C An LOWER DRYWELL/SANDBED REGION NOT[:
LLAKAGL fPAIH W-OM WJIER U!JyYvt I[ 10 Otltf1 DETAIL C !ýANDF3FD F)HF1 I
/ / //
SANDULLD N'LCION
.1/, 3 A' F.
Fl 1'/ U" 1~) /;
/
x D~Y WFt I i: l3OIIOtv1()r 5ANI)t-P-L) tVtN 6 4 6 6 4 4 6 6
'~KiK~7 6 6 6 ~ 4 *
- 4.
44 6 /
- - - -- 6 4 N>
- 6 -, -- 6 . .4 N. -7 A
~6 44 4 6 6 6 6 T~~~
6 6 4
- 4
.4 A6 __ * *4, . . .
7
AmerGen,, An Exelon Company Summary of Drywell Corrosion
- Leakage from the reactor cavity liner accumulated in the sand bed region, corroding the exterior surface of the drywell shell
- Corrective actions
- Water has been prevented from entering the sand bed region - The sand was removed and the exterior of the drywell shell coated with an epoxy coating - Analysis performed to determine code required thickness of the drywell shell 8
n" M *m M g M M M -M Mi
m mmmm-- -m -m mm m m -m m AmerGen, Summary of Drywell Corrosion n~xeioncompanl 0 GE analysis of code required thickness (1992)
- Buckling analysis based on Code case N-284 for refueling condition with no sand in the sand bed region for a 360 section model with 736 mils uniform thickness and Safety Factor of 2.0
- 736 mils is the code required general thickness for buckling in the sand bed region
- Local thickness criteria also established (e.g., 536 mils for a 12" x 12" area)
- A Section VIII analysis for internal pressure was originally performed at a design pressure of 62 psig; later updated for 44 psig design pressure (1993)
- 44 psig is an Oyster Creek plant specific maximum design pressure, approved in Tech Spec amendment 165 - Analysis demonstrated increased margin for the minimum required thickness 9
AmerGenSM Summary of Drywell Corrosion AnExelonCompany 2006 Refueling outage monitoring results
- Low leakage from reactor cavity liner
- Approximately 1 gpm
- No water in the sand bed region - Epoxy coating 100% visual inspection in all bays
- In good condition
- UT grid measurements in sand bed region from inside the drywell
- No corrosion
- Local UT measurements in sand bed from outside
- The drywell shell exceeds required thickness
- UT grid measurements in upper elevations
- No corrosion except 1 location shows 0.66 mils/yr 10 M M JIMm m W
mm m m mm m m Sand Bed Region 1992 AmerGen, kDrywell Shell Corrosion product on drywell vessel 1]
AmerGen, Sand Bed Region 1992 Drywell Shell Caulk Seal Sandbed Floor Finished floor, vessel with two top coats - caulking material applied 12 M M M M M M W M M M M M M M M M mM
Region 2006-AmerGen,, Sand Bed XjOn "Oplpay AP Drywell Caulk Sandbed Seal Floor
'by 19 caulking 19 Drywell Shell Bay 13
AmerGen 2006 Mesurement Locations In the Sandbed Region Color Code for 1hloknmu Location I Tyern ofUT Nimmjiermrt Green *UT Measurements ) 736 Mils External Point UT Measurements Yellow* UT Measurements Between 636 and 736 Mils A Internal Grid UT Measurements Red
- UT Measurem ents Betveen 538 and 638 MIls Internal Point UT Measurements SAYI BAY $ BAY 5 BAY 7 BAY S BAY 11 BAY1iS BAY 1? BAYI19 E*4%
11'-3" LUpporrum-lnsmm, Mmmum -3" 1111-A UnId 1 - bibmal 1 41
& A A A
AA ,A A A AhjlAA A,
-z ,r tie$ 'r. U ULi I A. 'et u~t A7 A A kA A
A i-i A A A A A A A -A 10
, 3, 7 LA A. 10.- 3 aA A
A I A ItJ mar.
- 1. all 1 1 1114010a:ýI ndod
'Zre ky Locilien (Ny Nlmber) p .a-d 1**-N uin .6-Ml .. mI O 0 Nm~ .MI-1 .--
14 W m m m m -m m M m m m m m 1 m m m m
M M M M M MM MM M MM AmerGen, An Exelon Cornpany Minimum Available General Thickness Margins Bay No. 1 3 5 7 9 11 13 15 17 19 Minimum Available 365 439 432 397 256 84 101 306 74 64 Margin, mils 15
AmerGen At[xd~ti Kon
}i~i Figure 21 Sandbed Bay # 19A 1154 Mil Nominal Shell Plate Thickness 12WK 2 *.= .15 Mils/yr Margin = 64 Mils 736 Mil General Required Shell Thickness Drain Lines A L ;--Strippable Coating Cleaned Complete Sand Added to Rx Cavity Start Sand Removal and apply Removal Epoxy Coating N W 13 awl Strippable Coating Strippable Added to Rx Cavity ; COati' 'si Not Used Bay? eaw Source: Raw Data -Am argon Calculation C-1302-187-5300-021, C-1302-187-5300-028, C-i1302-187-8610-030 16 M M M M M M wMMMMMMMMMM MM
AmerGen Figure 1. Sandbed Bay# I D 1200)( 1154 Mil Nominal Shell Plate Thickness -,L
* +/- 13.8 mils +1-10 nils +/- 8.4 mils
_.9 1000 Margin = 366 Mils 80() 736 Mil General Required Shell Thickness---., 600 Strippable Coating _ Complete Sand Added to Rx Cavity Drain Lines Removal and apply Cleaned Epoxy Costing Start Sand Reirv Strippable Coating Strippabe* NW~ owl, Added to Rx Cavity Not Used Bay 9 93 Beyi B Source Raw Data - AmerGon Calculation C.-1302-187-5300-021, C-I 302-187-5300-028, C-i1302-187-8610-17
AmerGen,, Drywell Shell Current Condition An Exelon Company Nominal DrywellMeasured Minimum Minimum Required Minimum Available Region Thickness, General General Thickness mils Thickness, Thickness, Margin, mils mils mils Cylindrical 640 604 452 152 Knuckle 2,625 2,530 2260 270 Upper 722 676 518 Sphere 158 Middle Sphere 770 678 541 137 Sphere Lower Spher 1154 1160 629 531 Sphere B Sand Bed 1154 800 736 64 18 ~m m rnI m -l l m m l I M M No
0 mm n - m
- m - m mn - m AmerGen,,,
E[xony Commitment Summary UT thickness measurements in various areas of sand bed and upper drywell regions Strippable coating will be applied to the reactor cavity liner every refuel outage 0 Leakage monitoring of cavity trough drain and sand bed drains 0 Visual inspection of sand bed region shell epoxy coating a Visual inspection of seal at junction between drywell shell and sand bed region floor 0 Visual inspections and UT measurements of the drywell shell in the trench areas 0 Visual inspection of moisture barrier inside drywell at junction between shell and floor/curb 19
AmerGen,, Overall Conclusions [Deon Compny
- The corrective actions to mitigate drywell shell corrosion have been effective 0 The drywell shell corrosion has been arrested in the sand bed region and continues to be very low in the upper drywell elevations 0 The corrosion on the embedded portion of the drywell shell is not significant
- The drywell shell meets code safety margins
- We have an effective aging management program to ensure continued safe operation 20 m m m m m m m m m - m m m
- m m - umm m -r!n m- m- m AmerGen,,,, An Exelon ompanry Drywell Shell Corrosion Issues from January 18, 2007 Subcommittee Meeting
- 1. Capacity Reduction Factor
- 2. Buckling Analysis
- 3. Reactor Cavity Liner Leakage
- 4. Future Monitoring Programs
- 5. Interior Surface of the Embedded Drywell Shell 21
AmerGen,, Capacity Reduction Factor An lxelon Company Subcommittee Issue # 1: The GE analysis and Sandia analysis are different. A key difference is that the GE analysis increased the capacity reduction factor for the refueling load combination case when there is no internal pressure present. Is this acceptable?
Response
The increased capacity reduction factor used in the GE analysis is acceptable. 22 M M M m m mM M M mM M Mm mM M M-
Capacity Reduction Factor AferGen AnExnCMpan Conclusions
- The GE analysis in 1992 increased the capacity reduction factor from 0.207 to 0.326 to account for orthogonal tensile stresses in a sphere
- Buckling tests conducted on spheres show a reduction in the effect of imperfections on the buckling strength
- The application of an increased capacity reduction factor to the Sandia analysis produces results similar to the GE analysis
- AmerGen's conclusion is that the GE analysis, including a minimum uniform thickness in the sand bed region of 736 mils, is valid 23
Buckling Analysis Details AmerGen,, Buckling Analysis followed the methodology outlined in ASME Code Case N-284 Allowable Compressive Stress = ,, ai cieFS ni= Plasticity Reduction Factor al = Capacity Reduction Factor ale= Theoretical Elastic Buckling Stress FS = Factor of Safety (2.0 for refueling condition and 1.67 for post-accident condition)
- Capacity Reduction Factor, a, was increased to account for the effect of a coexisting orthogonal tensile stress
- The increase was based upon tests conducted on cylinders - Tests conducted on spherical segments concluded that the modified a, based on cylinder test results is conservative 24
- - m m -m - mm mm m m m- m
- m m m m m - m m - m - m m m m - mm - AmerGen,,Y, Modified Capacity Reduction Factor 0 ASME Code Case N-284 allows modifying the capacity reduction factor to account for the effect of orthogonal tensile stress on buckling strength.
- The effect of orthogonal tensile stress due to internal pressure is well documented for cylinders.
0 The N-284 capacity reduction factor is modified using formulas developed by C. D. Miller. The formulas are based on tests conducted on cylinders. 0 Tests conducted on spheres, without internal pressure, show that the coexistence of orthogonal tensile stress reduces the effect of imperfections on the buckling strength of spheres
- Orthogonal tensile stresses are a result of in-plane tension or compression loads.
0 The modified capacity reduction factor is now used in ASME Code Case 2286-1 for spheres. 0 The following figure shows that the modified formula is conservative for spheres. 25
AnerGen Capacity Reduction Factor for Spheres 0.8Odland (EQ, 2) (From Sphere Tests Assume e/t = 18) 0(no Internal pressure was used In sphere test) 0.8 N i 0.5 N2 0.4 0.--Miller (Eq. 1)& T'(F'rom Cylindler Tests) 02Also Eq 8-6c . ........ .. of ASME CC2286-1 0.1 0.1 0.207 1713.1:2(b) (0*s c2/ a sola
.) :......... -3 -2.5 -2 -1.5 -1 -0.5 0 0.5 o2t al 26 m = = m= m m m - - M m - - m M MM
-=----- = = = = - m m m - - m - - AmerGen,,, Impact of Modified Capacity Reduction Factor A on Buckling Stress Parameter Sandia without Sandia with Modified a, Modified a, As analyzed Thickness 0842 0.842 Theoretical Elastic Instability Stress, ksi 46A9 46A9 Capacity Reduction Factor 0.207 0.207 Circumferential Stress (Orthogonal tensile stress), ksi 2.5* Equivalent Pressure, psi 10.02 "X" Parameter 0.042 AC 0,039 Modified Capacity Factor 0.272 Elastic Buckling Stress, ksi 12.65 Proportional Limit Ratio 0.253 0,333 Plasticity Reduction Factor 1.0 1.0 Inelastic Buckling Stress, ksi 9.62 12.65 Code Required Factor of Safety, FS 2.0 2.0 Allowable Compressive Stress, ksi 4,81 6.33 Applied Compressive Stress, ksi 4.47 4,47 Calculated Safety Factor 2.15 2.83 Assumed average orthogonal tensile stress based on 8 ksi orthogonal tensile stress given in Sandia Report Table 3-2. 27
AmerGenor Impact of Modified Capacity Reduction Factor on the Effective Factor of Safety with Uniform Sand Bed Thickness Note: Re-drawn from Sandia Report SAND2007-0055 page 79 (Red Curve) 5 4.5
'U U) 4~.
4 0 3.5
'U U. 3 S
2.5 2 1.5 0.6 0.7 0.8 0.9 1 1.1 1.2 Sand Bed Thickness, in. 28 m m m m m - m m mM m M- mM - m m
m m m - m m m m mm m - m m m m - - mm Amer~enW, NRC Issued SER for Drywell nxonCmpan Analysis - April 24, 1992 0 Numerous exchanges of technical information between Licensee, GE, Code Case Expert and NRC in early 1990s
- In its SER, the Staff discussed the methodology Oyster Creek used to perform buckling analysis and specifically addressed the use of a modified capacity reduction factor 0 Brookhaven National Laboratory supported the NRC Staff in performance of this review 0 The Staff concluded that the drywell meets ASME Section III Subsection NE requirements 29
Capacity Reduction Factor Aner$U1 Conclusions AEx pa 0nr0 0 The GE analysis in 1992 increased the capacity reduction factor from 0.207 to 0.326 to account for orthogonal tensile stresses in a sphere 0 Buckling tests conducted on spheres show a reduction in the effect of imperfections on the buckling strength
- The application of an increased capacity reduction factor to the Sandia analysis produces results similar to the GE analysis 0 AmerGen's conclusion is that the GE analysis, including a minimum uniform thickness in the sand bed region of 736 mils, is valid 30 M M M M M m mM mM mM - M m -
M i
m m m- m m - - - - m-m - m m - m-Buckling Analysis keroen An Exelon Compuny Subcommittee Issue # 2: Thickness margin may be better understood with a modern 3D finite element model where various thickness and thickness configurations in the sand bed region could be evaluated.
Response
- 1. Our current licensing basis analysis demonstrates that code requirements are met.
- 2. Use of a modern modeling technique, inputting actual shell thicknesses, should demonstrate more thickness margin.
- 3. AmerGen will perform a 3D finite element analysis of the Oyster Creek drywell using modern methods. This analysis will be completed prior to entering the period of extended operation.
31
AmerGen,,, An Exelon Company Reactor Cavity Liner Leakage Subcommittee Issue # 3: Leakage through the reactor cavity liner should be eliminated.
Response
AmerGen will perform an engineering study prior to the period of extended operation to investigate cost effective replacement or repair options to eliminate Reactor Cavity Liner leakage. 32 M u M M M M M M M M M M M mM M M M-
AmerGen,, Future Monitoring Programs ExeflCmpany A'e Subcommittee Issue # 4: The monitoring of drywell shell thickness should be more aggressive in the short term.
Response
The next slide shows the breadth and frequency of monitoring activities associated with the drywell shell. These activities include inspections to monitor the condition of the drywell shell so that any additional corrosion would be detected before the existing margin was eliminated. 33
Summary of Drywell Monitoring Activities During Refueling Outages AmerGen,,Afil@ *1!illi*it Drywell Monitoring Activities Performed Refueling Outage Date 11*,1vi.
,
During Refueling Outages 2006 I 2008 12010 1202 014 1 2016 2018 2020 [ 2022 1 2024 1 2026 2028 Verification of Elimination of Water Leakage Into Sand Bed Region
- 1) Cavity Liner - Apply Tape & Strippable yes yes Ye yes Ye Yes Yes yes Yes Yes yes yes Coating Y__ Yo __Y__ Y__ _______
- 2) Cavity Drain - Confirm Drain Is Clear Yes Yes Yes Yoes Yes Yes Yes Yes Yes Yes Yes Yes
- 3) Cavity Drain - Monitor Flow Rate Daily Daliy Daily Daily Daily Dolly Dally Dolly Doily Doly Daily Daily
- 4) Sand Bed Drains - Confirm No Water Dally Dally Doily Daily Daily Daily Dally Daily Dally Daily Daily Daily Upper Drywall Shell Monitoring
- 1) UT inspecltons - Upper Drywall Transition 2 Areas 2 Areas 2 Areas 2 Areas If corrosion Is greater than the Upper Drywall locations, UTs will be Areas Inside Drywall @71'-S6 _continued at same frequency as the Upper Drywall 13 Locations
- 2) UT Inspections - Upper Drywall 13 Locations Inside Drywall Q 87'.5", 80'.10", 100% 100% 100% 100% 100% 100%
51 '.10", 50'-2"11
- 3) UT Inspections - Drywall Transition Areas 2 Areas 2 Areas 2 Areas 2 Areas If corrosion Is greater then the Upper Drywall locations, UTs will be Inside Drywall Q 23.6-- __continued at same frequency as the Upper Drywall 13 Locations Sand Bed Region Shell Monitoring
- 1) LIT Inspections - Sand Bed 19 Locations 100% 100% Subsequent UT Inspection frequency will be established as appropriate, not to Inside Drywall a 11 '-3" exceed a 10-year Interval
- 2) VT Inspection of Sand Bed External Epoxy All 10 At Least At Least 10 In At Least At Least 10 In Coating and Shall to Floor Caulk Seal Bays 3 Boys 3 Bays 10 yrs 3 Bays 3 Bays 10 yrs
- 3) IT Inspections-Sand Bed 106 External 10 10 Bay 1 2 Bays 2 2 2 2 2 2 2 2 Locally Thinned Locations Bays Boys & 13 Bays Bays Boys Bays Bays Bays Bays* Bays
- 4) VT Inspection of Drywall Shall In Trench 100% 100% 100% VT Inspections will continue each outage If trenches are not restored.
Locations Inside Drywall
- 5) UT Inspection of Drywall Shell In Tronch 626 626 626 UT Inspections will continue each outage Iftrenches are not restored.
Locations Inside Drywall Points Points Points
- 6) Inspection for Water In Trenches YIf water Is not observed in trenches for 2 consecutive outages, trenches will be hYes Yes Yes restored and no further Inspections will be required.
General Monitoring
- 1) Structures Monitoring - Visual Inspection of Concrete Floor, Trough & Shell Inside Drywall Yoe Yes Yes Yes Yes yes Yes Yes Yes Yes Yes Yes
- 2) Structures Monitoring - Visual Inspection of Yes Yes Yes Yes Yes Yes Sump
- 3) Appendix J Test - Pressure Test and Perform Test Within Ton Years Visual Inspection of Accessible Int, and Ext. Test Test of Previous Test Shell Surfaces o__Previos__est
- 4) Drywall Service Level I Coating Inspection yes Ye Yes yes Yes yes Inside Drywall ____Y__ ____Y__ Ye___e_
- 5) Structures Monitoring - Visual Inspection of Moisture Barrier between Drywall Shell and 100% 100% 100% 100% 100% 100% 100% 100% 100% 100% 100% 100%
Concrete Curb Inside Drywall 34 - -i "-- -i -i - i - - -l -m m - ewi -l l -l
mH - - - - - - -u-M M mom Interior Surface of the 11erGen, Drywell Shell An Exelon Company Embedded Subcommittee Issue # 5: The trenches in the drywell floor should not be restored to the design configuration until sufficient monitoring is completed to verify corrective actions to eliminate water on the interior drywell shell have been effective.
Background:
The water source has been identified and corrective actions have been implemented. Corrosion of steel embedded in concrete is mitigated by the high pH of the water and by the passive, protective film on the steel surface. 35
AmerGen LOWER DRYWELL- An xelon Company SANDBED, TRENCH & SUMP REACTOR PEDEST/ IEL, 8'=11 SUB-PILE ROOM BED REGION TROUGH DRYWELL EL, 10' 0" A SKIRT
<. -A 4'
ELEVATION LOOKING WEST 36 - - m -f m m
-* m m - m- -_ -m -i - - i Lw ierGen Interior Surface of the Al [Eleon compfly Embedded Drywell shell Response to Issue # 5: The trenches in the drywell interior floor
" Inspect during refueling outages for water. " Visual/UT exams of shell within trenches. " After confirming in 2 consecutive refueling outages there is no water in the trenches, restore the trenches to their original design condition.
37
AmerGen, An Exelon Company License Renewal Application Summary 38 m m mm I f--'
- m -m*
m m m il
mm, mM --- , - - - m M in AmerGen M Description of Oyster Creek An Exelon Company
- Located in Lacey Township, Ocean County, New Jersey
- Barnegat Bay is Ultimate Heat Sink
- GE BWR 2 with Mark I Containment
- Licensed thermal power 1930 MWth e Design electrical rating 650 MWe e Interim Spent Fuel Storage established onsite
- Overall CDF
- Internal events: 1.1E-05/year - LERF: 5.8E-07/year 39
AmerGen, An Exelon Comrpany Current Plant Status
- Operating license expires April 9, 2009 o Operating in 21st cycle o Transitioned to 24 month cycles in 1991 o Completed 21st refueling outage in November 2006 o Regulatory Oversight Program (ROP) status 40 ow :fw aw mw -* if IW IM 4w -o M,4 ,n A-nog -a
so m0 AW, go M M -= m AmerGen, An Exekun Cofrnpaln'y License Renewal Methodology " LRA submitted July 22, 2005 " NEI 95-10 Rev. 6 Standard Format
- Prepared using NUREG 1800 (SRP) and NUREG 1801 (GALL) January 2005 draft revisions
- AmerGen prepared a reconciliation document comparing the Oyster Creek LRA to NUREGs 1800 and 1801 Rev. 1.
41
AmerGen An Exelon Company Aging Management Programs
- 50 GALL programs
- 18 existing - 14 existing requiring enhancements - 18 new (10 associated with Forked River Combustion Turbines)
- 7 Plant specific programs
- 2 existing - 2 existing requiring enhancements - 3 new (1 associated with Forked River Combustion Turbines) 42 W AM -, m ,*
AmerGensm Commitment Management An Exelon Company
- 65 commitments are listed in Appendix A of the application.
- A commitment tracking number has been issued for these license renewal commitments
- An associated action containing the details was issued for each of the commitments
- Each implementing procedure is annotated to provide linkage to and preserve the details of the commitment
- Process controlled by the commitment management procedure 43
AmerGen An Exelon Corn pany Status of Program Implementation 257 new and 111 enhanced implementation activities identified
- 13% completed in 2006 refueling outage - 19% in 2008 refueling outage scope - 68% to be performed on-line 44
-iM am- IW lo- nIt M aM M Mo An Exelon Corripanry Summary
- Aging Management Programs are established to ensure safe operation for period of extended operation
- License renewal commitments are tracked and will be implemented as expected
- On track for completing activities prior to entering period of extended operation 45
APPLICANT'S EXHIBIT 42 CASE CASES OF ASME BOILER AND PRESSURE VESSEL CODE N-284-1 Approval Date: March 14, 1995 See Numeric Index for expiration and any reaffirmation dates. Case N-284-1 Metal Containment Shell Buckling Design Methods, Class MC Section HI, Division 1 Inquiry: Are there alternatives to therequirements of NE-3222 for determining allowable compressive stresses for Section III, Division 1, Class MC con-strucction? Reply: It is the opinion of the Committee that, for Section III. Division 1. Class MC construction, the provisions of this Case, as follow, may be used as an alternative to the requirements of NE-3222. The Commi-tte es luncliott is to ePslbahlh rttlps ol salety, relatfing only TOreNtre o integrity, qjoverninO the construction f0 boilers, pressure oessels, translplort Tanks and nucl*par ci mpon ontl, and insentlre inspection for pres-ure it ettrit ovof Iticle:ar component, and trransport tanks, and to inlerpret these rules wvlhen qtuestionts irtse rl-n their intenl Thiis (Coi di.s rinol address Otlier saet yi,*,*es rW retarlin lati oIh tie snr.trot or l boilers, pressure.*os**l. Iraisplorl ltalks ind nuclea.r colt utonleiit5, antd he ioirspeclwt Of ntuclear coinponenltl awtl trarnspivrl 1Tank, The user Of the Cfloci shoUllil r. 01110r pertirnOlt codes, tland:-rd&, law., roriulatiOns , to,or other rele*vatt doctnients. I (N-284-1 ) Copvriic.1 .OSm-iIarnt~iontOO Piolrrioo N10 -10S cIncseiiýiýiME ijrrC.e'Oc. c0I .- i 111350 'il ielo. 2Ar tic: i jCiiOcdi~ia:or lir, ;Dois-devoc Is ,0:0 1r1oc
I CASE (continued) N-284- 1 CASES OF ASME BORER AND PRESSURE VESSEL CODEI CONTENTS 3
-1000 Metal Containment Shell Buckling Design Methods ....... ............. 4 -1 10 0 In trod u ctio n ............................................................... 4 -1 110 S c o pe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 -1111 Limitations ............................................................. .. 4 -1120 Basic Buckling Design Values .............................................. 41 -1200 N om enclature .............................................................. 44 -1300 Stress A nalysis Procedures .................................................. 6 -1310 Axisynunetric Shell of Revolution Analysis .................................... 6 -1320 Three-Dim ensional Thin Shell Analysis ........................................ 6 -1330 Determination of Stress Components for Buckling Analysis and Design .......... 6 -1400 F actors of Safety ........................................................... 7 -1500 C apacity Reduction Factors ................................................. 77 -1510 Local Buckling. ..................................................... 7 -1511 Cylindrical Shells - Stiffened or Unstiffened .................................. 7 -1512 Spherical Shells - Stiffened or Unstiffened ..................................... 8 -1513 Toroidal and Ellipsoidal Shells ............................................... 8 -1520 Stringer Buckling and General Instability ..................................... 10 -1521 Cylindrical Shells - Ring and/or Stringer Stiffened ............................. 10 -1522 Spherical Shells - One-Way or Two-Way (Orthogonal) Stiffeners ................ .10 -1523 Toroidal and Ellipsoidal Shells - One-Way or Two-Way (Orthogonal)
Stiffeners .............................................................. 10 3
-1600 Plasticity R eduction Factors ................................................ 10 -1610 Factors for Buckling Analysis by Form ulas .................................... 10 -1611 C ylindrical Shells ........................................................... 10 -16 12 Spherical Shells ............................................................. 11 -1613 Toroidal and Ellipsoidal Shells ............................................. . 11 -1620 -1621 -162 2 Factors for Bifurcation Buckling Analysis .....................................
Cylindrical Shells Sph erical Shells .............................................................
- 11 11 12 I
-1623 Toroidal and Ellipsoidal Shells ............................................... 12 -1700 17 10 B uckling E valuation ........................................................
B y Form ulae .... .... ..... .. .. ... ... . ... ..... .... .... ..... .. ...... . . .... ... 12
. 1.
3
-1711 Discontinuity Stresses ....................................................... 13 -1712 Theoretical B uckling V alues .................................................. 13 -1712.1 Local Buckling .. .......... ..... 14 -1712.1.1 Cylindrical Shells- Unstiffened and Ring Stiffened ............................ 14 -1712.1.2 -17:12.1.3 -1712.1.4 Cylindrical Shells - Stringer Stiffened or Ring and Stringer Stiffened ............
Spherical Shells- Stiffened or Unstiffened .................................... Toroidal and Ellipsoidal Shells - Stiffened or Unstiffened ...................... 14 17 17
£ -1712.2 Stringer Buckling and General Instabihliy ...................................... 17 -1712.2.1 Cylindrical ShellsI Rinl Stiffened . ............................ .............. 17 -1712.2.2 Cylindrical Shells--Stringer Stiffened or Ring and Stringer Stiffened ........... 17 -1712.2.3 Spherical Shells -- One-Way or Tw,-Way i Oftlhogonal.) Stiffeners ............... 18 2 (A 2-284-1,) I cop? ght InLernt0 I1SME -J IP.,
F10OWe, 0 Ie urnoerli1ense we A.,i
.iereplCouCilOn or nerporing _rrle: lrO ,A i .: l*n1!IH3 h
Llcense,?'Eneon 59 94901, I
,or Resale. 0*$.23.0007 I, 37.3071,S Ir;
CASE (continued) I1 CASES OF ASME BOILER AND PRESSURE VESSEL CODE N"-284-1 1712.2.4 Toroidal and Ellipsoidal Shells - Meridional and/or Circumferential Stiffeners ................................................................ 18 1713 Interaction Equations for Local Buckling...... ............. ................. 18
-1713.1 Elastic Buckling .................................................... ...... 19 -1713.1.1 Cylindrical Shells ......................................................... 19 -1713.1.2 Spherical Shells ............................................................. 19 -1713.1.3 Toroidal and Ellipsoidal Shells ..................... : ......................... 21 -1713.2 Inelastic Buckling.............. ...... ....... ........................... . 21 -1713.2.1 Cylindrical Shells ........................................................... 21 -17 13.2 .2 S pherical Shells ............................................................. 21 -1713.2.3 Toroidal and Ellipsoidal Shells ............................................... 21 -1714 Sizing of Stiffeners ....................................................... 21 -1714.1 Cylindrical Shells--Ring Stiffened ........................................... 24 -1714.2 Cylindrical Shells - Stringer Stiffened or Ring and Stringer Stiffened ............ 24 -1714 .3 Spherical Shells ............................................................. 24 -1714.4 T oroidal or Ellipsoidal Shells ................................................ 25 -1720 Axisyrmneuic Shell of Revolution Bifurcation Analysis ......................... . 25 -1730 Th-ree-Dimensional Thin-Shell Bifurcation Analysis ............................. 25 6 -1800 Summary. ........................................................ 25 Figures -151 1-1 Capacity Reduction Factors for Local Buckling of Stiffened and Unstiffened C ylindrical S hells ......................................................... 8 -1511-2 Capacity Reduction Factors for Local Buckling of Stiffened and Unstiffened C ylindrical Shells ......................................................... 9 -1512-1 Capacity Reduction Factors for Local Buckling of Stiffened and Unstiffened S pherical S hells .............. ......... .... . .. .. ... ............ ....... . . .. . 9 161 0-1 Plastic Reduction Factors for Buckling Analysis by Fornrula .................... 11 -1620-1 Plasticity Reduction Factors for Bifurcation Buckling Analysis.................... 12 -1712.1.1-1 Theoretical Local Buckling Stress CoefficientsNfor Stiffened and Unstiffened C ylin drical S he lls . . . .. . . .. . . .. . . .. . . .. . . .. . . . .. ... . . .. . . .. . . . . . . .. . . .. . . .. 15 -171?1.2.-1 Theoretical Local Buckling. Stress Coefficients for Stringer Stiffened Cylindet Subjected to It-Plane Shear ................................................ 16 -1713.1-1 Interaction Curves for Elastic Buckling of Cylinders Under Combined Loads .... 20 1713.1.3-1 Radii R1 and R3- for Toroidal and Ellipsoidal Head ............................ . 22 -1713.2-1 Interaction Curves for Inelastic Buckling of Cylinders Uinder Combined Loads ....
5 Table
-1800-1 Flowchart ............................................................... 26 I
I U I .-N- '284-1 m S*E5' pL,,oeG I T-S.=ur eduecleslori. l ens -Uer . I&'c 7 1 i.i, I-ee1f
,1i~C licenseI'Tm IkTTqdEnippelmnhied,m,,ric.*
- .T,5.m leS cr m oe~Pe e a : lll,c3
,: '.,iei 7 .- 37 57,1
CASE (continued) N-284-1 CASES OF ASME BOILER AND PRESSURE VESSEL CODE I
-1000 METAL CONTAINMENT SHELL BUCKLING DESIGN METHODS by the Code are specified in NE-3131(b), NE-3133 and NE-3222.
I The basic Code buckling rules as well as the rules
-1100 INTRODUCTION -1110 Scope of this Code Case are based on the fabrication require-ments of NE-4222.
The methods of buckling evaluation are given in I The design of a class MC containment vessel against
-1700. The buckling evaluation is made by either of buckling shall be based on the requirements of Subsec-tion NE of the Code. NE-3133 provides specific design rules for unstiffened or ring stiffened cylindrical shells, two methods. The first method is contained in -1710 and utilizes formulae and interaction equations which II must be satisfied. The alternate method involves check-spherical shells and formed heads under external pres-sure and unstiffened cylinders under axial compression.
NE-3222.1(a) and (c) provide general guidelines for other shell geometries and loading conditions. The ing the adequacy against buckling as computed by computer codes in accordance with -172(0 or -1730. The procedures for these methods are outlined below Ii and' summarized in -1800. purpose of this Case is to provide stability criteria for determining the structural adequacy against buckling of containment shells with more complex shell geome-For both methods the following items are calculated: (1) a set of stress components, oj, from applied loads II tries and loading conditions than those covered by are computed in accordance with -1300, (2) a factor NE-3133. Such effects as symmetrical or unsymmetrical dynamic loading conditions, circumferential andlor me-ridional stiffening for heads as well as cylindrical of safety, FS, is determined from -1400, (3) capacity reduction factors, ai, are computed from -1500, and (4) plasticity reduction factors, i,,, are obtained from U shells, combined stress fields. discontinuity stresses -1600. and secondary stresses are considered in the stability evaluation. When using the formulae in -1710. theoretical elastic buckling stresses for special loading cases (,. iy4 ~., and LT,,*)are computed froom -1712. The corres-I Acceptable stress analysis procedures and methods for determining stress components to be used in the ponding allowable stresses for elastic and inelastic stability evaluation are given. The buckling capacity buckling (e.g., t = ,i, c:r4JFS, and ,0r> = 'i4, ':a. of the shell is based on linear bifurcation (classical) analyses reduced by capacity reduction factors which account for the effects of imperfections and nonlinearity are then computed in -1713. The interaction equations of -1713 are then used to deternmine the adequacy design for other than the special loading cases. of I in geometry and boundary conditions and by plasticity When die buckling evaluation is by computer coder reduction factors which account for nonlinearity in per -1720 and -1730, sets of amplified stress components in aterial properties. ,TA = ,,TFSlcEi, and 7,, = ,:riJvi are calculated and
-1111 Limitations. The procedures of -1710 and compared with the linear bifurcation predictioiis of the -1720 assume an axisymmetric structure. All contain- computer codes.
ment vessels have penetrations which are nonaxisymme-tric with respect to die containment vessel. Studies and experience have shown that penetrations which are fully
-1200 NOMENCLATURE i= 4). 0, or (410 corresponding to meridional ,I reinforced according to the Code rules, and which have an inside diameter that is small compared to the vessel diameter, will not reduce the buckling strength of the overall structure. Paragraphs -1710 and -1720 may be direction or stress component, circumfer-ential direction or stress component. and in-plane shear stress component. respec-I tively 1
used without special consideration of properly reinforced penetrations that have an inside diameter not greater i= 1 or 2 corresponding to 4' or 6 above than 10% of the vessel diameter. The effect of larger where I corresponds to the larger com-penetrations shall be considered in the Design Report. pression stress and 2 conesponds to the The rules of this Case are applicable to shells with radius-to-thickness ratios of up to 1000 and shell thick-ness of ,.1j in. or greater. Any vessel design using less smaller compression stress i= v. ht r. 7 to denote the special loaditig cases of axial ior meridionah compres-I conservative procedures or involving cases not covered sion aloneý hydrostatic external pressure, by this Case shall be justified in the Design Report.
-1120 Basic Buckling Design Values radial external pressure. and in-plane shear.
j= L. S. G coirespondmric to local buckling I The basic allowable buckling stress values permitted (buckling of shell plate between st iffeners 4 (N-2,'4-I; (cWrrirr ASM.l I terflal1o ii F OoIHS ýrlrterIilusa 151l, No ret' Cflucjc C, ne~q'oiklflC:
;
I.-"T lle~r .v1rlou hr ef'Se 11NnCIfi. 4r,0n' ILII ee- .etCr 2
'ci 470 1 7 CUt-C'S"O007 Ie,='LuOIC;C.-r, 17..371'!
627.37 '22 U
CASE (continued) CASES OF ASME BOILER AND PRE SSURE VESSEL CODE NM-284- I or boundaries) stringer buckling (buck- which act as bulkheads include end stif-ling between rings of the shell plate feners which satisfy -1714(b)(2)t, a cir-and attached meridional stiffeners, and cumferential line on an unstiffened head general instability (overall collapse), re- at one-third the depth of the head from spectively the head tangent line, a circumferential Al = cross-sectional area of stiffener (no effec- line at point of embedment in or anchor-tive shell included), sq in. iI = for age to a concrete foundation, and the meridional (longitudinal or stringer) stif- cylinder to head junction when the head feners. i = 0 for circumferential (ring) is designed in accordance with this Case stiffeners for stiffened heads. C= elastic buckling coefficients L,= one-half of the sum of the distances L3 on either side of an end stiffener, in. Et 4 = distance in i dhection between lines of support, in. A line of support includes C. .,= elastic buckling coefficients in hoop di- any intermediate size stiffening ring rection for cylinders under uinform exter- which satisfies the requirements of this nal pressure, ,7+ = 0 .and ,.T, = 0.5,ye, Case in addition to the lines of support respectively included in the definition for L3. E= modulus of elasticity of the material at C~i = one-half of the sum of the distances f.i Design Temperature, psi. on either side of an intermediate size FS= factor of safety stiffener. in.
,G E f, = effective width of shell. acting with the =2(1 +.If) stiffener in the i direction, in.
h,=width or depth of elements of a stif- = 1.569_R?: unless otherwise noted fener. in. Mi = t'JiRt
= moment of inertia of stiffener in the i M 3= 4FijRt direction. about its centroidal axis, in.4 M = smaller of M.+ and Me in = number of half waves into which shell = moment of inertia of stiffener plus effec-tive width of shell 4 (A. = f4i, for will buckle in the meridional direction circumferential stiffeners and -( = f4% n= number of waves into which shell will for meridional stiffener), about. centroidal buckle in the circumferential direction axis of combined section, in the i direc- R =shell radius, in.
tion. in.4 R, = radius to centroidal axis of the combined stiffener and effective width of shell, in.
=I + .4 .4 R1, R 2 = effective stress radius for toroidal and Ai + ( 12 ellipsoidal shells in the d and 0 direc-4*-ý = value of IrH which makes a lame stiffener tions, respectively, in. See Fig.
fully effective. that is, equivalent to a -1713.1.3-1 bu kheaid = shell thickness, in. Ji = torsional constant of stiffener for general = thickness of elements of a stiffener. in. non-circular shapes use -_h s ,in. A .4 K= the ratio of the axial membrane force 1t.. 1to./4,4, = A,,+ t. - + I..0.5 (1o~
, +tI) per unit length to the hoop compressive Zý=distance from centerline of shell to membrane force per unit length centroid of stiffener (positive when stif- * ' H,,li feners are on outside.), ii.
lx1 = capacity reduction factors to account for K2 = 1 (*'T j: the difference between classical theory and predicted insnabilitx stresses for fab-L= overall length of cylinder, in. ricated shells t - = t L, = length of cylinder between bulkheads or q:= plasfici.y reduction I ctor to accounl for lines of support with sufficient stiffness non-linear maierial beltaivior. includina. to act as bulkheads. in. Lines of support effects of residuil stress 5 (N-284-]) UCo7.,wt9n! i ag1,IEIntecr~hior.a3 Ijeprt{jUILitC[IOIit
... ~...- ... ......- .
wi.,VthOifi 0, ,.0#-,kifOlblODi_.lrlted
.
Iliense TIOld,
.
OSI' bce~se.E e~r. 21 1 23,O:7* ~d132.sr'dtelýed.2
CASE (continued) S N-284-1
'rR rR -
CASES OF ASME BOILER AND PRESSURE VESSEL CODE Non-axisymmetric loadings shall be applied by use of I A= the lowest multiples of the prebuckling stress states o+r, and crp which cause an adequate number of Fourier harmonics. Ring stiffen-ers, if any, can be modeled discretely or an equally accurate representation shall be used and verified in I linear bifurcation buckling the Design Report. Longitudinal stiffeners on cylinders
,a= Poisson's ratio ,-<,= calculated membrane stress components due to applied loads, psi and radial stiffeners on doubly-curved shells can be modeled as an orthotropic layer, if the stiffener spacing is close enough to make the shell plate between stiffeners I ,mini = theoretical elastic instability stresses, psi o-i,:, . = allowable stresses for elastic and inelastic buckling, respectively, psi r,,= amplified stress components to be used fully effective. A method for determining the effective width of shell for longitudinally stiffened cylinders is given in -1712.2.2. This method may also be applied I
to doubly curved shells when the capacity reduction
....
for elastic buckling stress evaluation, psi
- S/n'=
o-ip= amplified stress components to be used factors are determined on the basis of an equivalent cylinder. I for inelastic bifurcation buckling stress evaluations, psi -1320' Three-Dimensional Thin Shell Analysis
--- A-]i-i For those vessels containing major attachments capa-ow7. 1 ,e=theoretical elastic instability stresses in ble of signifcantly altering the overall response of the the hoop direction for cylinders under vessel, the coupling effects of the vessel and the external pressure, K = 0 and K = 0.5. attachment may have to be accounted for. This can be respectively, psi done by the use of a three-dimensional thin shell finite .,,= tabulated yield stress of material at De-sign Temperature, psi. (Section II, Part.
D, Subpart 1, Table Y-1) element analysis or an equally valid analysis which shall be verified in the Design Report. The model used
'I -1300 STRESS ANALYSIS PROCEDURES for such analysis should be refined enough to adequately account for coupling effects of the vessel and its attachments and to provide an accurate estimate of I
The goveming factor in the buckling analysis of a stresses due to applied static and dynamic loadings. containment shell is the compressive membrane stress zones in the vessel arisino from the static or dynamic response of the vessel to the applied loadings. The The procedure given in -1310 for modeling stiffeners should -e followed. I procedures of this Case call for static or dynamic linear shell analyses. Geometric nonlinear analysis may be -1330 Determination of Stress Components for used. The. analysis should account for the dynamic effects associated with any dynamically applied loads. The shell analysis may be performed by the axisymmet-Buckling Analysis and Design The internal stress field which controls the buckling I of a cylindrical, spherical. toroidal or ellipsoidal shell rical shell of revolution method of -1310 or by alternate methods. The more elaborate, three-dimensional thin shell analysis method of -1320 may be used if the consists of the longitudinal membrane, circumferential membrane, and in-plane shear stresses. These stresses 1 vessel ceomet.ry and/or the magnitude of any attached masses are such that axisymmetric shell of revolution mnay exist singly or in combination, depending on the applied loading. Only these three stress components are considered in the bucklino analysis.
.I analysis is not appropriate. Thermal and other secondary For the dynamic loading case, the stress results from stresses will be treated the same as primary stresses.
Fluid-structure interaction should be included in the dynamic analysis. a dynamic shell analysis are screened for the maximum value of the longitudinal compression. circumiferential compression. or in-plane shear stress at each area of I
-1310 Axisymmetric Shell of Revolution Analysis Most containment vessels can be adequately modeled interest in the shell. The max:iimum value thus chosen is taken together with the other two concurrent stress components (here one or both components may be I
as aýxisymmeuric structures for determining their- overall tension) to form a set of quasi-static buckling stress response to, the applied loads. The mass of local attach-ments should be smeared around the shell at the applica-ble elevations. A separate, uncoupled analysis ot sic-components. For each particular area of interest, thlree sets of quasi-static buckling stress components corres-ponding toCthe three maximumi values are used to I nificant attached masses can be performed, if required. investigate the buckling capacity of the shell- The 6 (N-284-i1) I , epoll1t --£S 1E I'lerntocnlI F'rov*deTr., Is uldel I'Ce',e p111.Sf1= N.6orei:.iedUCrIcd I'ew c,:II',a [ irtlleiJit.'c' IlI l ic se ,r(* 11'jren P=5.V. 0 11:1-I iN007C 161. WCr=
-1ceI.r ..
I
CASE (continued) CASES OF ASME BOILER AND PRESSURE VESSEL CODE . N-284-1 analyst should also review the results of the dynamic Three modes of buckling are considered in this Case. analysis for additional sets of quasi-static stress compo- These are: (1) local buckling which is defined as the nents which may represent a more severe condition buckling of the shell plate between stiffeners, (2) stringer than those defined above, and include them in the buckling which is defined as the buckling between buckling investigation. circumferential rings of the shell plate and the attached When the applied loading causes static or quasi- meridional stiffeners and (3) general instability which static stresses which vary in longitudinal and/or circumn- is defined as overall collapse of the combined shell ferential directions within the particular area of interest, and stiffeners. All stiffeners must. be proportioned to each set of stress components along any circumference preclude local buckling of the web or flange of a may be assumed to act uniformly over the entire stiffener. One set of oj, values is given for local circumference. For three-dimensional thin shell bifurca- buckling and a second set for stringer buckling and tion analysis. the actual stress fields may be used. general instability. When combining the effects of different applied These capacity reduction factors can be used for loads which act. concurrently, each of the three stress both internally or externally stiffened shells as well as components is summed algebraically. If the sum of the unstiffened shells. The influence of internal pressure longitudinal or circumferential components is tension, on a shell structure may reduce the initial imperfections then that stress component may be set to zero. and therefore higher values of capacity reduction factors may be acceptable. Justification for higher values of a-, must be given in the Design Report. This capacity
-1400 FACTORS OF SAFETY increase may also be applied to the equivalent sphere The basic compressive allowable stress values re- used in the buckling design of a toroidal or ellipsoidal ferred to by NE-3222.1 will correspond to a factor of shell under internal pressure.
safety of two in this Case. This factor is applied to buckling stress values that. are determined by classical (linear) analysis and have been reduced by capacity -1510 Local Buckling reduction factors determined from lower bound values In the following paragraphs no increase in buckling of test data. stress is recoenized for values of M, less than 1.5. The stability stress limits referred to by NE-3222.2 will cotTepsond to the following factors of safety. FS. in this Case: -1511 Cylindrical Shells--Stiffened or (a) For Design Conditions and Level A and B Service Unstiffened Limits, FS = 2.0 (a) .Axial Compression (See Figs. - 511-1 and (b) For Level C Service Limits the allowable stress -1511-2C) values are 12,0% of the values of (a). Use FS = 1.67. Use the larger of the values determined for a,.: from ic) For Level D Service Limits the allowable stress (1) and (2). values are 150% of the values of (a). Use FS = 1.34. (1) Effect of R1; The factors of safety given above are used in the buckling evaluation of -1700 and are the minimum , 0 .L = 0.207 for R/ Ž>600 values required for local bucklino. The buckling criteria Oiven in -1700 require that the buckling stresses corres- 1.52= - 0. 47 3 3 liog( (R11.) 1 ponding to stringer buckling and general stability fail-ures be at least 20% higher than the local bucklinc stresses. E E< 0
.0 J Use smaller valute for R/A < 600 (2) Effect of Length -1500 CAPACITY REDUCTION FACTORS 0
The buckling capacity as determined by linear bifurca- kL = 0.627 if 4< 1.5 tion tclassical) analysis is not attained for actual shells. The reduction in capacity due to imperfections, and = 0.837 - 0.14M!,. if 1.5 < 2,;. < 1.73 nonlinearity in geometry and boundary conditions is provided through the. use of capacity reduction factors. = if 1.73< At.. <tO. u;;. given below for shells which meet the tolerances 0.2 of NE-422'*). ,,. = 0.2.07 ifM4 Al, l0 7 (!-2_4-1i) rIIC, L "ej
. I'-
1H S c"I/ 'ell . 11t1 I" .S-r[IP "F1! e-. t.e,=,I-IL.JIeeston
,.eelonl;It I ',I I' 1:1,1.'.' I:,",!
0r I' t.K LIce [111 er'I.. I1himNI1TII I'iIiICr lihel l, e h'0trl IF i 14c;i ti PeeII. 0 I/COI C ;7 7 S
U CASE (continued) N-284- 1
1.0 CASES
OF ASME BOILER AND: PRESSURE V ESSEL CODE. I I I 0.8 I-, .~ imm" . r
.4 0.6 U
0.4 0y =L50-000 Oy. 30,000 _*-* *f I 0.2 U 0.0 I 100 200 300 400 500 600 700 800 R/t I FIG. -1511-I CAPACITY REDUCTION FACTORS FOR LOCAL BUCKLING OF STIFFENED AND UNSTIFFENED CYLINDRICAL SHELLS (USE LARGER. VALUE OF a, FROM FIG.-1511-1 AND FIG. -1511-2) I (b) Hoop Compression (b) Equal Biaxvial Compressive Stresses I a
= .8 C*IL= -'cOL = A:.L (c) Shear (See Fig. -1511-1) a-- = 0.627 if M < 1.5 .;-= 0.837 - 0.14M if 1.5 ! M < 1.73 01,eL = 0.8 if R/1-< '250 cv,,,4ý = 1.323 - 0.218.0Slog 1 , (RIt) if 250 < RI1 < 1000 0.826 i fI. -,3 <11 < '3. 6 I =0.124 if Al >Ž23'.6 I -1512 Spherical Shells--Stiffened or Unstiff ened. See Fi.. -1512-1 then see -1713.1.2 for method ec) U(nequal Biaxial compressive Stresses of calculatingA. , Use c1,: and ca.* in accordance with -1713.1.2. . (a) Untiayial Compression (d) Shear Bucklinc, evaluation will be. made using principal stresses.
0., =ý C.C,.,= C0-ck1., = 6'0.6 See (b) for 0ti11 not io exceed, 0.75) -1513 Toroidal and Ellipsoidal Shells. Use the val-ues of c- given for spherical shells in accordance with
-17] 3.1.3.
I S *N-2.*4 I 0le,%rd,cocr or no: cilino pecn:iueo.. ICiv.[i-tl ei iio - uc e,*,C.7CE"~,.eo lZ7 i0.L. ,e' =1hJJgI_;le;,' I',
;'t 19'O r lc!licr F'e: .ns 0 i.t7.:21M'7.10 37 1.1S*:T .
I
CASE (continued) CASES OF ASME BOILER AND PRESSURE VESSEL CODE N-284-1 0.8 0.6 0.4 0.2 0.0 0 2 4 6 8 10 12 14 FIG. -1511-2 CAPACITY REDUCTION FACTORS FOR LOCAL BUCKLING OF STIFFENED AND UNSTIFFENED CYLINDRICAL SHELLS (USE LARGER VALUE OF a& FROM FIG. -1511-1 AND -1511-2) 0.8 0.6
\ Uniaxial compression ~alL 0.4 0.2 Equal biaxial compression (12L 0.0 0 4 8 12 16 20 24 28 M = Qi H/f FIG. -1512-1 CAPACITY REDUCTION FACTORS FOR LOCAL BUCKLING OF STIFFENED AND UNSTIFFENED SPHERICAL SHELLS
- 1) (N-2,S4-1])
Ul,ý , CC:IH!SM InterC,-tronArH 3/4cn'eeo~~~~~~~~~fce~ IH ne f:Gn InentnAM -icen-=c.,-),, cne=;eHS .O5co U.-MopqIesion ne)tutno Kein n xl 1ý, 0J:2j,'C)(1-. ',7. IAST
I CASE (continued) N-284-1 CASES OF ASME BOILER AND PRESSURE VESSEL CODE I
-1520 Stringer Buckling and General Instability and the capacity reduction factors, i.e., 'm cz.. When -1521 Cylindrical Shells-- Ring and/or Stringer Stiffened these values exceed the proportional limit of the fabri-cated material, plasticity reduction factors, 11,, are used to account for the non-linear material properties. The I
(a) Axial Compression ct¢.* = 0.72 if A _ 0.20 inelastic buckling stresses for fabricated shells are given by 1 1i , u_ j.. Two sýts of equations are given for determination I of the plasticity reduction factors. For buckling evalua-LVG
= (3.6-CIA0 5.0 x 4A+ cvc£ if 0.06 *5A < 0.20 if.A < 0.06 tion by formulas (see -1710) the factors are expressed in terms of _c) 0,. . For bifurcation buckling analysis with a computer program (see -1720 and -1730) the U
where a,+/- is determined from -1511(a)(1) given by the following relationships: and A4 is factors are expressed in terms of r-; FS because j,: is an unknown quantity. This approach will always be conservative since Tj FS *_ fi, aii, U U For stingers only: A - A. tsj
-1610 Factors for Buckling Analysis by Formulas '- Ag (,See Fig. -1610-1)
For"rings only: - - A54--- For rings and stringer: A for A.
= smaller of above values -1611 Let Cylindrical Shells S
Note: Amssue that the stiffener is not effective if A < (0.06. (b) Hoop Compression I ((a; = 0.80 (a) Axial Compression (e) Shear "i. = 1.0 if A < 0.55 I
= 0.80 if RP/
- 250 c*7= 1.32~3 - 0.2181 log v: IRA;"
0.45
"= .- + 0.18 if 0.55 < A <_1.6 3
1.31 if 1.6 < L < 6.25 I
- "' +1.,5*
if 250 < RI. < 1000 if A > 6.25 I
"q ,;,, = -1522 Spherical Shells--One-Way or Two-Way (Orthogonal) Stiffeners (b) Hoop Compression (a.) Meridional Compression ant/or Hoop Com-pression *.= cs = 0.1013 "1F = I 2.53 if -A< 0.67 9.291if 0.67 < ", < 4.2 I - + -1523 Toroidal and Ellipsoidal Shells--One-Way 5h-= 7 if Ž 4.2 >
I or Two-Way (Orthogonal) Stitteners. Use the value of given for spherical shells. ci) Shear "1,..- = 1. I if <_ 0.48
-1600 PLASTICITY REDUCTION FACTORS The elastic buckling stresses for fabricaled shells are given by lhe producl of the classical buckling stresses "l:e= 0.43 ' +0.1 -- if 0.48<1-<1.7 U 10 A-284-h I
F.r0 4dp $ I' 0 ,errsna-Mr M31 Sr,0E SroA*eS IT' 16 urine lceri5e Cr r,evcr~k,ru(1'i. Is ielpiceIkifiLor 9t S0 VII1 .01.iE 1ircl_(l:lh*CUII 5115511611 IV' jceilse=
,_-
lIen: N c,S ,11949101.1'Tl=I
.'I'U,,
7515 51'2.35 7 163'?3 3
- ICr.
I
CASE (continued) CASES OF ASME BOILER AND PRESSURE VESSEL CODE N-284-1 1.0 0.8 0.6 0.4 0.2 0 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 1 = aij oiejI~v FIG. -1610-1 PLASTIC REDUCTION FACTORS FOR BUCKLING ANALYSIS BY FORMULA
-1621 Cylindrical Shells 0.6 This = - ift > 1.7 (a) A.xial Comre..sim Thb= 1.0 if (TS cr, 0.55 -1612 Spherical Shells 0.t1S~ =
- 5 4 .r, if 0.55 < ,S 5 0.738 (T,
(a) AMeridional Compression and/or Hoop Comn- I - -,F pr*es.sion Use the values given in -161 1(a). ITý,FS CTsFs
= 1.31 - 1.15 if 0.738 < <1.0 (17.)Hoop CompreSsioln -1613 Toroidal and Ellipsoidal Shells il T,0FS 0-<(.67 (a) Meridional Compression and/or Hoop Com- ai) (TC.
pression Use the values given in -1611 (a). Tj,, = 2.53 - 2.- TFS ,q .7"FS if 0.67 < ""FS-- < 1.0 (c) Shear
-1620 Factors for Bifurcation Buckling Analysis (See Fig. -1620-1) 1 -- .0) i T 1 ESf If the computed values of (T,, or (T, (see -1711 for methods for treatment of discontinuity stresses) exceed
- if'0.48 < *ý<0.6 (T./FS or T,!,,- exceeds 0.6 T,/FS, the design is inadequate - 0.43Cr, and modifications are needed to lower the value of cr,.
II N-2,14-1) I~ ~~~cfrIhtAMErýerrScoa rncrflel.05.n epr-cf,clono, pefmqnc~dwrittoujil cere fro. IHS Nuo! PReIt 00 l 112 -00 7 MS
I CASE (continued) N-284-1 CASES OF ASME BOILER AND PRESSURE VESSEL CODE 1,0 I 0.8 I 0.6 I I 0A4 I 0.2 S 0.0 L 0.0 0.4 0.5 0 ,6 0-7 0.8 0.9 1.0 oJi FS aOy FIG. -1620-1 PLASTICITY REDUCTION FACTORS FOR BIFURCATION BUCIKLING ANALYSIS
-1622 Spherical Shells stress analysis, as described in -1300and the buckling I
evaluation. (a) M'eridional C onpl/-e)'Asion and/or Hoop Coti-
/)ressiol" Use the values given in -1621(a).
For each of three approaches it is recommended that a separate buckling evaluation be made for (a) local buckling of the shell plate between stiffening I elements (b) buckling between circumferential stif-
-1623 Toroidal and Ellipsoidal Shells (a) Mer~iional Coinpr.ssion andl'o Hoop Coin-feners of combined shell plate and attached meridio-nal stiffeners and (c) general instability or overall collapse of the combined shell and stiffening system.
i pression Use the values given in -1621(a). For some geometries, the critical load values pre-dicted for the general instability mode may be sig-nificantly larger than those for the local buckling i mode. This is not necessarily a good indicator of
-1700 BUCKLING EVALUATION The buckling evaluation may be performed by one the reserve strength of the design for these geometries since actual failure may occur from excessive defor-nation before the predicted general instability load I
of a number of different approaches. Three acceptable alternative approaches are given in -1710. -1720. and -1730. In -1710 formulas are civen for the buckling evaluation. An axisynmmetric shell of revolu-can be reached. A static and/or dynamic analysis is performed for each specified loading and the stresses computed in accordance with -1300. The. stresses I are combined for each specified Service Limit to tion and a three-dimensional thin shell computer code are used for the buckling evaluations given in
-1720 and -1730, respectively. Generally., the same determine the buckling stress components. (-,.
For buckling evaluation by formula, the stress components. r%are inserted in the interaction equa-3 comput,-er program is used for both the linear elastic tions given in -1713. Simple equations are also 12-1(-284-I ) I I tOMIEIrenlrn "Cy."I~ Prc.\'.oecov IH-Sunder !icense w.71ASME 1,zerise,,=E.,EIo1 ,6(194'9101use, mucqlestor Fhev,r, H, 'errod~dln 0 -lloI-Int r W I'Cflul
-erm: Ic rsI 1IlS In: Iv, RP. le 0 1.23,2007 1C3 7 57 MST
CASE (continued) CASES OF ASME BOILER AND PRESSURE VESSEL CODE N-284-1 given in -1712 for determining the classical buckling investigated. For openings reinforced in accordance stresses of shells for the special stress states (load with the area replacement rules of Subsection NE. it cases) of axial or meridional compression alone, can be assumed that the reduction in the buckling hydrostatic external pressure (K = 0.5), radial exter- capacity of the shell is negligible. Stresses in the shell nal, pressure (K = 0), and inplane shear alone. The due to penetration loads shall be given consideration, allowable: stress values for these special stress states to preclude localized buckling of the shell. are given by '-, = aý5 :r:,i/FS for elastic buckling stresses and by a> = Yr.,.- for inelastic buckling stresses. The allowable buckling stresses for the -1710 By Formulae special stress states are used in the interaction equa-tions in -1713 for determining the allowable stresses -1711 Discontinuity Stresses. Application of certain for combined stress states. thermal or mechanical loads may result in high local The classical buckling stresses may also be d&er- discontinuity membrane stresses. To assume that the mined for nonuniform stress fields from the computer maximum value of such localized stresses act uniformly codes used for the methods of -1720 and -1730. over the entire portion of the shell under study will Therefore. when using the values of -1500 for (_ij, result in an overly conservative design. An acceptable simply supported edges should be assumed for deter- alternative and conservative method of analysis is to mination of theoretical values by computer. In this use the average values of the membrane stress compo-Case, the edge of the shell is assumed to be simply nents within a meridional distance of V,`/Rt from a point supported if at the edge the radial and circumferential of fixity or 0.5 ,iRt on each side of a discontinuity displacements are zero and there is no restraint for determination of ,i. The average stress values are against rotation or translation in the meridional direc- to be used in calculating total stress components for tion. Also there is no restraint against rotation in performing the buckling analyses of -1713. the circumferential direction for panels between me- An acceptable alternative to the averaging method ridional stiffeners. would be to caculate the uniaxial theoretical buckling For buckling evaluation by use of a computer stress values for the actual meridional stress distribution code, amplified stress components -Ta, and Tip are by use of a computer progam. These more accurate determined from r-,s = .7;FS/'zj and (ri p = iT values of theoretical buckling stresses can then be used The method of -1720 is based upon an axisyinmetric for the buckling evaluation of -1713 in lieu of values shell of revolution linear bifurcation analysis. The calculated per -1712. shell model is assumed to be axisynmmetric with simple support boundary conditions and the stress components T,_ and T;j, are assumed to be uniformly distributed around the circumference. Each set of -1712 Theoretical Buckling Values. The buckling stresses given by the following equations correspond amplifiecd stress components is compared with the classical buckling capacity of the shell model as to the minimum values determined from theoretical discussed in -1720!. If the classical buckling capacity equations for shells with classical simple support bound-is equal to or greater than X, times the stress ary conditions under uniform stress fields. Paragraph components, ,:., and a.1,, the design is adequate. A -1712.1 gives equations for delermining the classical value of X, = 1.0 is recommended for local buckling buckling stresses of unstiffened shells or the panels and 1.2 for stringer buckling and general instability between stiffeners of stiffened shells. Paragraph 1712.2 modes of failure. gives equations for determining the theoretical stringer For those cases where significant nonaxisyinmetric buckling and general instability stresses for stiffened conditions exist and a three-dimensional stress analy- shells. sis has been performed. the buckling evaluation Equations are presented for calculating the flteoretical approach of -1730 may be used. For such three- classical elastic bifurcation buckling values for the dimensional thin shell bucklino analysis the calcu- unique loading cases of axial compression, radial pres-lated state of stress may be used in determining the sure, hydrostatic pressure. and shear. In addition to amplified stress components *. ad iT 0 for input to their use in predicting buckling for these conditions, the program. the values are also used in the interaction equations For any of the above approaches, the effects of local .of -1713 for combined loadinc cases. The subscripts discontinuities and attached masses, if not included r and h denote radial and hydrostatic loading cases. with the general shell buckling anilysis, should be respectively. 13 (N-28 FrU.¶ec: )ý IHIS L9er Icen'se -5SM LicenseE e0c< 59Q lUl. 1C ser-iuUCISSUCý*.. I0.1?, 14I'll.t IC( Iti, 01"nerwrqlnriingkleirnhled wiltrc iclens.e 11icfIll
ýiOi TO,Pesele. S 5:0 I Ho'0. 3-.'73-,T tVj,1
3 CASE (continued) N-284-1 CASES OF ASME BOILER AND PRESSURE VESSEL CODE
-1712.1 Local Buckling -1712.1.1 Cylindrical Shells- Unstiffened and 0.746 if 26 _<M*, < 8.69 R -
I Ring Stiffened (See Fig. -1712.1.1-1) " C/M= (a) Axial Compression IT C,,,Er/R R
-
if M, > 8.69
=
C66 = 0253 ,+ I I C, = 0.630 0.904 if Al.. < 1.5
-1712.1.2 Cylindrical Shells- Stringer Stiff-ened or Ring and Stringer Stiffened I
Cl = 2. + 0.1013Wt. if 1.5 <Mf,, < 1.73 C,.= 0.605 if MA,,L- 1.73 (a) Axial Compression (See Fig. -1712.1.1-1') The following equation applies when Ma < 2M, otherwise use the equation given in -1712.1.1(a). I (b) Evternal Pressure (1) No End Pressure (K = 0)
,:d. = C4 Et/R CG = 1.666 if Me _<1.5 I =.. CrrL = C6 r E/IR C4, = 1.616 if M!1,< 1.5 CG =
3.62
+ 0.0253AL,6 .
2 if 1.5 <MAL.<3.46 I MOA= 2.41
-'- 0.338 if 1.5 <MA <3.0 C. = 0.605 (b) External Pressure if MA,,> 3.46 I
if3.0 <*MA4.< 1.65-R The following equations apply when M.- < 1.15 C= :i - 0.921.17 11, I? 5 . otherwise use the equations gi'ven in -1712.1.1(b).
!M, ir' = (,rR/M.)- U C6, 2.1 if M,, > 1.65 R (1) No End Pressure (K 0.27-- 0)
I
= = = C.r E/iR
('2) End Pressure. Included (K = 0.5) C. 7 = C.,, E C,=' ,, - , [ 1092 i,} ÷,,2 ,'--+A
,I (2) End Pressure ]ncluded (K = 1.51 C".. 0.988 if ,
- 1.5 1.08 if 1.5 < M:1< 3.5.
7 L.. , C;.EtI/R I 07 -, 0.45 C C 0.92
,11,.I- 016-36 if 3.5* M < 1.65-RI n:0+ 0.5 a- 1 0 R +O-92 I C6.1 0.275 1.5R if M0 ,> 1,657- I?
(C) Shear (See Fig. -1712.1.2-1 The following equations apply when M < 26 and I
&, < 3.0. where a = greater of f,., and (G.mad b (C) Shear C _ C,', !/R smaller of C and (.4 and M = b1',/Rt: otherwise use.
the equations given in -1712.1.1(c). I C,:.* = 2.-.27 C" 4.88f 1 ifM.<< 1.5
<M <2 C.,.,~ ~ 0 + 0.0239WI> + 3.62 a 14 iN-2._4-1)
I
- I S wl!Crli Plfo'A,1~lcr wn ý'T -S:'M Y.en$ee=E. CCI.CSTIIIRLT 101 LIC.'r=I.4rflO.~'CflO ICIr I IQ rePrFdIcICrI Orl DrrerOd - Q1 Oe17T,1 p iIUSg 11110 ,C .9 C1:,rIH I,: 12,1 CIl'13.'007 IC
CASE (continued) CASES OF ASME BOILER AND PRESSURE VESSEL CODE N-284-1 10 5.0 I f Cr (Stringer stiff.) 1.0
-O . (Ring stiff, and unstiff.)
0.5 C oh J~
*o*, T11, ' ter 0.1 0.05 0.01 1.0 5.0 10 50 100 M =I,/
FIG. -1712.1.1-1 THEORETICAL LOCAL BUCKLING STRESS COEFFICIENTS FOR STIFFENED AND UNSTIFFENED CYLINDRICAL SHELLS 15 iV-2S4-1l I I.!Irrnr. 7ar -M,rI IIr,I n ..
ýI, P'...,Ir 'Henr flrrltld tinl;r COk licr-e=E.e~on, EM Cý04'. srluq co K.
I CASE (continued) N-284-1 CASES OF ASNIE BOILER AND PRESSURE VESSEL CODE I
'u I
5.0 I I I 1.0 U 0.5 I 0 I I 0.1 I 0.05 I I 1 0.01 5.0 10 50 I 100 M = b I-"R"l I FIG. -1712.1.2-1 THEORETICAL LOCAL BUCKLING STRESS COEFFICIENTS FOR STRINGER STIFFENED CYLINDER SUBJECTED TO IN-PLANE SHEAR lo 07-284-1) , I
,1t7 A.SM~Inlernntnrs F;croeo L,,H§ urde, Iceflue 9.1~ASME re~~rcdIo7Ie.rrrrIeIwor~.r.]rerrl-.rIee..,lnr...TIr-enre err L- see-Eeoor'-
I 11ý
,
- 'Z-ýl10 C, ?S.22
;er1M-9cce ,r 0 _' ,71, 0-. ý-
I
CASE (continued) CASES OF ASME BOILER AND PRESSURE VESSEL CODE N-284-1
-1712.1.3 Spherical Shells -Stiffened or Un- -1712.2.2 Cylindrical. Shells- Stringer Stiff-stiffened ened or Ring and Stringer Stiffened (a) Equal Biaxial Compressive Stress The theoretical elastic buck.ling stresses for both
[Equations are the same as -1712.1.1(a)]. stringer buckling and general instability are given by the equations which follow. Stringer buckling is defined
- = cl= C ErfR as the buckling between rings of the stringer and attached plate and general instability is defined as the C = 0.630 ifit < 1.5 buckling mode in which the rings and attached plate deform radially. - 0.904 + 0.1013M12 it1.5<MVt<1.73 The elastic buckling stress is denoted crio where i M:" is the stress direction and j is the buckling mode; j = .5 for stringer buckling andj = G for genei:al instability.
C = 0.605 if _>1.73 The stringer buckling stress is determined by letting the cylinder lengh equal the ring spacing, Li = fU (b) Unequal Biaxial Compressive Stress and the general instability stress by letting Lj = L2 . Not used in interaction relationships of -1713. The values of ti and n to use in the following equations are those which minimize :..i, where in Ž 1 (c) Shear When shear is present, the principal stresses will be and a. > 2. The following values are to be used for calculated and substituted for '5,.1 and _-e in the buckling *eo and (19. When f.,t < e,- or f,66 < f, set p.. = 0. equations. (a) Axial Compression
-1712.1.4 Toroidal and Ellipsoidal Shells-CeL- =
Stiffened or Unsliffened Toroidal and ellipsoidal shells shall be analyzed as Ce#' = Ct if 4!. 1.2*88IctQ equivalent spheres.
-1712.2 Stringer Buckling and General Insla- (6= .9r'Q(1-0.I>41510 c6=I 1 (.I -. if (.> 1.2881Q I)ility -1712.2.1 Cylindrical Shells -Ring Stiffened (a.) Avial Compression where -4.60 = 0.605E1/2(1 +4) .¢i /,E- N For strinoer buckling:
(b) External Pressure Determine the value of a which minimizes i,,*,ý in the equations which follow. j = S..A= = J.-= 0.t= ,L, L'. = (I) No End Pressure (K = 0) For general instability: EQ _ LI 56 , (mi"- 1 (n:' - ])(n1 +T r ,,R9 j = G. L, = LUý (2) End Pressure Included (K = 0.5) See -1521cai for ,< and the equation below for
,7 hen C'. < (j_ the values for Y,!, must be LA* EhL. or - 0 determined by ileration since the effective width is a +
in' ++/-0.5 k - Iot' + A' ,Ri' function of tile bucklin, stress. (c) Shear A~ ~ Ai-A 7 i43.+ 4--4 A~ 3.46 / 1.-- tit T
- L3~s"f Pr'o..,JI* r-"IH. .sOI0,IIr li sý,Qr.
e ASI LiIejltee=E e:.r, ;5p' .2. 101.5. le=IuCIeOIC n. I e'on 9 IS e,0IeI:,rCt~tl~ C,ifOWe,-.IIllfI] pt .11.irC oLAWler-!e NCCll IHS IC; II PetV. SI >1--,2 I- ,1
U CASE (continued) N-284-1 CASES OF ASME BOILER AND PRESSURE VESSEL CODE I where General Instability (j G) U
=
te, = 1.56 7Rt but not greater than C,,. A11 = L I _j+ I)M71()_
*,AA
{L I2,A,,v.. -*2A
-4*
LT. 10 2"_ .:: -1 I t2 4 3 =D (at) + DT, ( 0 c- + A,) 4-A > I
-4I+ -iC -i where A*, values given in (a) above.
I (c) Shear A23 = Lii-i.) + w 2ý
+ -, + =
A,, (E,,ý + G !j)j *346L; 9j'c WEV4 I EL) +4
-1712.2.3 Spherical Two-Way (Orthogonal) Stiffeners Shells -One-Way or I EAAmq' RI C [',
R
(a) Equal Biaxial Compressive Stress C",,IeO = =76e_ -. ) I l - i_,,2
- E.,. - -
Subscripts 1 and '2 correspond to ,t and 0 where I
'Iý 1gTand 11 > 1- For one-way stiffening A- = =E" -- -- ' Hb' . + L '
G.,. = - .
+. i, (, t-/12. -1712.2.4 Toroidal and Ellipsoidal Shells-Meridional and/or Circumferential Stiffeners. Tor-U D
D, Et' (K: +Elb E.tAZ,- 120 oidal and ellipsoidal shells may be analyzed as equiva-lent. spheres. I L-Et' + EL.+ EA,,ZLI U
-1713 Interaction Equations tbr Local Buckling.
D ,-, 12 (1 - - ,+- The equations which follow can be used to evaluate
,.... *+-Er- Gi" (*?.,+_c)+!.' * + Gj ,GJ the local buckling capacity of the shell. The form of such interaction relationships depends on whether ihe CD E. ,Z+1C+ + --='
L.4Z- LAS
+ +. critical stresses are in the elastic or inelastic ranoe. If.
aMN of the uniaxial critical stress values exceed the proportional limit of the fabricated material, the inelastic I interaction relationships of -1713.2 should be satisfiecL tb) ExLernal Presuire Strineer BucklinoE. = S) in addition to the elastic interaction relationships of
-1713.1. If the calculated meridional or hoop stress is tension, it should be assumed zero for the interaction U
I1. 6 ý/R bur not greiaier than 4> evaluation. An increase in the critical Uxial compressive stress due to hoop tension may be included in the analysis, if justified hn the Design Report. Methods for I A.= = .l,Li= 0. = .L = . treatment of discontinuity stresses are given in -1711. The theoretical buckling values can bc dtermimed fioom -1712.1 or from a coniputer program by ilhe a l N (N-284-1) I
'0/..2eO 22.IHS V2/f0.:1.er,2e0with 032..P 12'd[ //00-,1£.'204/0 ;lt orf .. V//.1 0 l e/'lli /'/2/t'/*.r 40/20.042/00/SO10, Il* 232t u',-I/0*&'E e!0cr.,' /I 1,10.20, P3/alt. 0 1,G-'1,5 ¶3 1 2J'1 1 101. *... "7..7 .757 O
I
CASE (continued) CASES OF ASME BOILER AND PRESSURE VESSEL CODE N-284-1 procedures given in -1700 and -1711. If the relationships No interaction check is required if a,.ý <_0.57, telt6. of -1713.1 and -1713.2 are satisfied, the design is adequate to prevent local buckling. I* "-0r. ,it The buckling capacities for the stringer buckling and , , 0.5 , , t.-.t 1 ;. general instability modes can be determined in a similar (C) Axial Collpiression Phis Shear manner by substituting the capacity reduction factors and theoretical buckling values for these modes into the interaction equations. This Code Case recommends + (7) < a that the buckling capacity for these modes be 20% greater than for file local buckling mode. This is accomplished by changing the right-hand side of the (d) Hoop Compressioi Plhs In-Plane"*5hear interaction equations to 1.2 rather than 1.0. An accept-able alternative is to determine the stiffener sizes by the equations given in -1714. This method will be more conservative.
-1713.1 Elastic Buckling. The relationships in the (e) A.vial Compression Plus Hoop Compression P/is following paragraphs must be satisfied. in-Plane Shear -1713.1.1 Cylindrical Shells. The allowable For a given shear ratio T,-/,TT) determine the value stresses for tile special load cases of axial (meridional) for K. from the following equation:
compression alone. hydvostatic external pressure, radial external pressue, and in-plane shear alone are given by K. = 1 ,- .
,,T- F , - FS and substitute the values of K. ,., K. 7,r and K., c.*,
for 7,, a .. and T,*..respectively, in the equations given in (a) or (b) above.
,_* FS , n 7*- FS -1713.1.2 Spherical Shells. The allowable stresses for the special load cases of uniaxial compres-These stresses are used in the interaction equations sion and uniform external pressure are .riven by the which follow for combined stress states. The allowable equations which follow and are used in dile interaction stresses can be determined, if desired. for any stress equation for other biaxial compression stress states. If by letting ,T, T, KAt t,ý/. The resultino values for one stress component is in tension. tie tensile stress ,Yý, ,6, and 7.,,d are allowable stress values ,,,. -.
may be set to zero and the shell conLsidered as a and cr The allowable stresses are given by these uniaxial compression case. equations when the expressions on the left are equal to 1.1 for local buckling and 1.2 for stringer buckling and oeneral instability. For further explanation of the j7t-tFS and IT- = interaction equations see Fig. -1713.1-1. See -1400. -1511. and -1712.1.1 for FS. FS , and where
,T., respectively. Alternatively. ,.J7 may be determined F,S= see -1400 by a computer program using the procedure given in ,I= see -1512(a) -1700 and -1711. -= see - 1512 b) 0a.. i C'omp.ression1 PiY Hoop Comptres's'ion 1K and < 0~.5) = see -1712.1.3. The length 4'. to use for calculat-No interaction check is required if ,y<c:ý, ing Al is equal to the diameter of the largest circle which can be inscribed within the lines < 1.0 of support. Tile length is to be measured along ,7, -- 1,7,, - 1" I,,
die arc. When ,-Ta. ; ), determine the. principal stresses corresponding. to stress components -, and substitute tar *., andx,- in the expressions below for .71 and Tr. (b) A.ial Compres.tion, Phis Hoop Cmiiprcssioli (K
> ()5.S = larrer compression stress of .-rT. and ,S, '-2,$4'1 )
IILIr,. Ee r.. 'I5 1 i -2'1.l: I '-IIur P KAUT 62.. ,ý,ý7-163
' iI.,,ri-i '-
e, , I
,IýIIi~ ,I -
Cc~l n, ec *'- r,--i.2t.L, 16?3>:: ,'1'W
I CASE. (continued) N-284-1 CASES OF ASME BOILER AND PRESSURE VESSEL CODE U I (T (To te crra SNo interaction check required when gro I and o0are within this region I I A + B ea aha 1.0 U I (a) Axial Compression Plus Hoop Compression I (TO 17Gha I Ksra N Ksara I I I 0.5K, oha te/to Ksaxa axa I (bMAxial Compression Plus Hoop Compression Plus In-Plane Shear I FIG. -1713.1-1 INTERACTION CURVES FOR ELASTIC BUCKLING OF CYLINDERS UNDER COMBINED LOADS I 2o (X-2,4-I I Crp'7,, alt ,A.ME Intern,!,rye~a
- ,.ed ob IH-S h, 1nder f J¢ rerlro.C!, flnan'rvnwr qn A.S,1 . lh al---m -r I,,.r,,Itc1-rt , IorF Ler,Isee E- 'Icr, 'St 11 ;Jot f.,r C;4)01 e OIISOCO071" 3 37 Uce 11. .MucOEIr, '.e',.
e% I
CASE (continued) CASES OF ASME BOILER AND PRESSURE VESSEL CODE N-284-1I (72 = smaller cohmpression stress of a,_T and a6 (a) Axial Compression or Hoop Compression (a) Unicaxial Compression
) xiCo P. is ressio1.0, te L.Ty,. C' , _<1.0 (b) Axvial Compression Phis Shear (b) Biaxial Compression ---- < 1.0 + -- < 1.0 -1713.1.3 Toroidal and Ellipsoidal Shells. The (c) Hoop Compression Pills Shear allowable stresses for the special stress states of uniaxial compression and equal biaxial compression are given by the equations which follow and these values are ¶+ <*1.0 C'r, I *rcIl used in the interaction equation for other stress states.
TteL and cr,,
"q"- FS IT -=C* =-
FS z -1713.2.2 Spherical Shells. In the equation which follows: where FS, c"ln,"2b -ad ,_r&L are defined in -1713.1.2. Calculate ,lr. and '-2eL from the following procedure. '71C = T14L'la See Fig. -1'13.1.3-1 for R, and RJ
,Tie= ,&L = theoretical buckling stress for sphere where i]-o corresponds to stress al, FS. See -1713.1.2 under equal biaxial stress based on R associated for al and ta, and -1612 for ,
with c. R = R, if a1 = b-:? and R = R2 if (a) Uniaxial or Biaxial Compression o =-*... = theoretical buckling stress for sphere under equal biaxial stress based on R associated with -r,. R = R] of t72 = a6 and R = R, if -1713.2.3 Toroidal and Ellipsoidal Shells. In C--2 = ta0 . the equations which follow: When a,,* , determine the principal stresses corresponding to the stress components a7,and substitute a,71= "fil!~, 10 and Cr1 = 'l_'*c_..Q for ,T6 and ,a 6 in the expressions for al and 7, given ill -1713.1.2. where ill corresponds to stress a1 , FS and 112 corres-Also determine radii R1 and R 2 which correspond ponlds to stress a,., FS. See -1713.1.3 for ,-1 . (. a,. to the principal stress directions. ,c. and -1613 for ill and 11. (a.) Uniaa4al Compression. See -1713.1.2(a) ta) Unia.vial Compression P/ls Shear (b) Biaxial Compression. See -1713.1.2(b)
-1713.2 Inelastic Buckling. The relationships in the following paragraphs must also be satisfied when any of the values of -1j< 1. No interaction equations (1) Biaxial Compression P/ls Shear are given for meridional compression plus hoop com- The following two relationships must be satisfied.
pression because it is conservative to ignore interaction of the two stress components when buckling is inelastic. See Fi.. -1713.2-1.
-1713.2.1 Cylindrical Shells. The allowable stresses for the. special stress states of axial compression alone, radial external pressure and inplane shear alone are given by: -1714 Sizing of Stiffeners. The size of stiffeners 10 '-ee 1 for' c,andc "
1 "t ain f',, <. = " required to prevent stringer buckling and general irsta-bilitv failures can be determined from the interaction See -1610 for "-v.and -1713.1.1 for . equations givern in -17]3 by using the approp;iate values 21 (N-284-1) U PIo.q'701,I'. 102 1110cr III 0110 .. ITO ucei17- c-, IIti11 133 3
CASE (continued) N-284-1 CASES OF ASME BOILER AND PRESSURE VESSEL CODE I (b) FIG. -1713.1.3-1 RADII Rl AND R2 FOR TOROIDAL AND ELLIPSOIDAL HEAD I I
'2 (N-2Is'4- I I *Zmv hlAME Irterfl~t-oaI Pro-',cd b, IUS -~der license mIii t.0 repiocuo.lir, or nele~orkino~
J
,,~iie~rI1,e- rI HS %-,rv 101br L E ýc'I0 11..eevE rO-S101. Unýer~lcls I (Af -lwce 01S-.iZS207 IC. 37 M51 K
I
CASE (continued) CASES OF ASME BOILER AND PRESSURE VESSEL CODE N-284-1 CI =(-i arc (70 ý 6xc
-? I a'. CIO (rXC (a) Axial Compression Plus Hoop Compression 0"0 av, */ a',1 . -- +- - =1.0 alc I.c ) . CC i= 0 or 0for ai i1= x or rfor cri .a, I FIG. -1713.2-1 (b) Axial Compression or Hoop Compression Plus In-Plane Shear INTERACTION CURVES FOR INELASTIC BUCKLING OF CYLINDERS UNDER COMBINED I LOADS I 23 V ,'q4-1)
I H, SME riernauohl
#r**,e '. HS h~derhcense ,,ith ASME rpiojuc non o: hlemvorkirngpe,rmitlerJ wivthoutlice-~
i, lion) [HS mitec Jt FS el.miwc: ilnutI~cr%&f~n O 5001, f14CU- uglso Ke-S
I CASE (continued) N-284-1 CASES OF ASME BOILER AND PRESSURE VESSEL CODE U for ,r_,%.and cýj and changing the right side of the (2) End Stiffeners- Rings Which Act as Bulk-equalities from 1.0 and 1.2 or by the following equa-tio~ns. These equations are based upon the recommenda-tion that the stringer buckling and general instability heads I E(n` - 1) stf'esses be 20% greater than the average of the local shell buckling stresses in the adjacent panels. The method for sizing stiffeners will always be conservative where ly, = the value of Ire which makes a large stiffener I because the stiffener size determined from the following fully effective, that is, equivalent to a bulkhead. equations will be adequate for each of the uniaxial buckling stress components. For ring stiffened cylinders and stiffened spherical heads simple equations are given The effective width of shell (.6 = 1.56 ,IRt A, /A,, A, = area of large ring plus tg.. in.2 I A,- = area of intermediate size rings plus Lj. in.s for sizing stiffeners. The equations for a stringer stiff-ened cylinder are more complex and require a computer for solving. The method for sizing stiffeners is based (Ty,ý = average value of stress over distance L, where stress is determined from -1712.2.1 (b)for a cvl-I upon the following relationship: inder w'ith L = L. 1.2 17ieLOKL n = number of buckling waves determined for rar where ,T 0 ; is the stress determined from
-1712.2.1(b) for a cylinder where the large stif-I The above requirement is conservative under com-bined stress states and for inelastic buckling as well (c) Shear feners are assumed to be the same size as the small stiffeners and X = .rR/L U 1E*-= 0.184 C6,g 4 MP t- C as elastic buckling. In the case of combined stress states provide a stiffener with the largest value of the moment of inertia calculated for each uniaxial C66= value determined from -1712.1(c) for M 4, = Ms -1714.2 Cylindrical Shells--Stringer Stiffened I
stress state. or Ring and Stringer Stiffened
-1714.1 Cylindrical Shells (a) Asial Compression - Ring Stiffened (c) Axial Compression a ..->
1.2a o-,..c and cr, > I.Nc I A,-Ž_> ; - 0.063) &~i and .4A_Ž 0.06 (,ti See -1511(a) for a,, -1521(a) foi for ,rJ<. and -171 ( ) t"l for -and*
,&.-1712.1.2(,a) U The following equation is based upon the recommen-dation that the effective stiffener section provides a bending stiffness equal to that of an unstiffened shell (b) Hoop Compression -r > 's I
having the same buckling stress. 5.33 e.rz and
,T ,.- > J 2? r,-.
I (b.) Hoop Compression See -1712.1.2(b) for ,ro; and -1712.2.2.(b) for ,.*. and a , 0c)Shear Assume K 0. I () Intermediate Size Ring I =._,*, Em-u - 1) R 2'o;R See -1712.1.2(c) and -1712.2.2(c) for :r, ,r.and ,4. I stress
,= determined M.4,= M".
from -1712.1.1(b) for respectively..
-1714.3 Spherical Shells (a) One-Way Stiffeners I
1.875;-: L5; E. 1
='
62.4( M :. I-iJ I 2-4 N-284-i1 I o, (alit ASNIEIn TnTlO0M' P y,d !:r.%1H'-, 1.-ler ,;A11..'11arI- .StI Ito re;)rcd llOIa 0( uewomr*ornierse? vslto,.( Iense HSr 5 LIe Tee: o ':7" l2i L' et =l itt? Tar 'ensae, 0 ILtT3.'2i.7 IS :35..,17 S7 r I
CASE (continued) CASES OF ASME BOILER AND PRESSURE VESSEL CODE N-284-1 The above equation is for meridional stiffeners. Inter- general instability modes of failure. The design is change 0 with 4) for circumferential stiffeners. adequate when the computed values.of A\ are equal (b) Two-Way (Orhogonal) Stiffeners to or greater than the minimum recommended values. 5.92Et IT > -1730 Three-Dimensional Thin-Shell Bifurcation Analysis The value for Teri. is determined from -171'2.2.3 and This paragraph gives the provisions for buckling M, is the smaller of the values cone-sponding to the evaluations of containment shells by use of three-0 and 1,)directions. dimensional computer programs for thin shells. The
-1714.4 Toroidal or Ellipsoidal Shells. Toroidal three-dimensional computer codes are more elaborate and ellipsoidal shells shall be analyzed as equivalent than those used for axisymmetric shell of revolution spheres by substituting R, for R in the equations of linear bifurcation analysis and are mostly based on finite -1714.3. Seý Fig. -1713.1.3-1 for R.- element principles. The advantages of three-dimensional codes are that circumferential variation of geometry., -1720 Axisymmetric Shell of Revolution material properties and loadings which exist due to Bifurcation Analysis presence of cutouts, penetrations. stiffeners and other attachments can be considered in the analysis.. The An axisymmetric shell of revolution linear bifurcation choice of computer code should be based upon the analysis may be used for the buckling evaluation of type of problem to be solved and the degree of accuracy the containment vessel. Two sets of stress components, desired.
T,., and ,i, are calculated by the procedure given in Two sets of stress components, ,Y., and aT", are
-1700. The stress components , are elastic whereas calculated by the procedure given in -1700. Independent the stress components I-a- are used for buckling evalua- buckling evaluations are to be made for these sets of lion when one or more of the stress components is in stress components where :,_. * ,i,. When considering the inelastic range. Independent buckling evaluations the stress components ay, it is conservative to assume are to be made for components a'Y.arnd IT, If all stres that there is no interaction between meridional compres-components are elastic, aj, = ,i and no evaluation sion and hoop compression (see -1720). Therefore stress need be made of stress components -,-,. components T,. can be. set to zero when investigating The buckling stresses of cylinders under combined combinations of -T6, and I-1/2,.- Similarly, IT6 , can be loads compare closely with the distortion energy theory set. to 'zero when investigating combinations of T'!'ý,
when the uniaxial buckling stresses in the meridional and I,. and circumferential directions are equal to the yield The stress components ,Y,, and Y,, are applied as stress of the material. This state of stress is considered quasi-static prebuckling stress states. The computer in the stress intensity criteria of NE-3210). When the code will analyze the selected shell model for linear uniaxial buckling stresses in either the meridional or bifurcation buckling and determine the lowest multiple. circumferential directions are in the inelastic range. no ,\,., of the prebuckling stress state which causes buckling. interaction effect between these two stress components A minimum value of X, = 1.0 is recommended for need be considered. Therefore stress components Y6, the local buckling mode of failure and a value of \. = can be set to zero when investigating combinations of 1.2 is recommended for the stringer buckling and
,i*.,,and ,_v¢. Similarly. ,r* may be set to zero when general instability modes of failure. The design is investigating combinations of , and ,*U. adequate when the computed values of x, are equal The stress components . ., are applied as quasistatic to or greater than the minimum recommended values.
prebuckling stress states. The computer code will ana-lyze the selected shell model for linear bifurcation buckling and determine the lowest multiple..A,., of
-1800
SUMMARY
the prebuckling stress state which causes buckling. A miinimum value of A,. = 1.0 is recommended for the Table 1800-1 summirizes the rules of this Case to local buckling mode of failure and a value of A- = aid the designer in using these miles. The containieni 1.2 is recommended for the stringer buckling and shell must also satisfy all other applicable Code criteria. 25 fA`-284-1) ucnn eetE,FCr `5911F.-%2 I .c
*.ý'Z =1 lcce5DI .. I lr M cd, ci n Pe&.-rccIs, ThL~t A scNcens nr'nHS NCItin",PSaitco 0.1 F.x'~r'I,5.'7
I CASE (continued) N-284-1 CASES OF ASNIE BOILER AND PRESSURE VESSEL CODE I TABLE -1800-1 FLOWCHART I Step 1: Perform static and/or dynamic analyses for each specified loading and compute stresses in accordance with -1300. Step 2: Combine stresses for each Service Limit to determine the stress component, aj. Step 3: Determine the buckling evaluation approach consistent with the vessel design and method of analysis. See -1700. For clesign by formula proceed to Step 9a. For bifurcation analysis by computer proceed to Step 4. Step 4: Multiply the stress components of Step 2 by the proper safety factors of -1400 to obtain the buckling stress components ai FS. I Step 5: Calculate capacity reduction factors xij for each stress component of Step 2 for local buckling of each panel and for overall instability as given in -1500. I Step 6: Calculate any applicable plasticity reduction factors, i, per -1600 for the buckling stress components from Step 4. Step 7: Compute amplified stresses for the imperfect shell by dividing the buckling stress components of Step 4 by I the capacity reduction factors of Step 5 to obtain the amplified elastic stress components ojs jis = oi FS/ri, 1 Step 8: Divide the elastic stress components of Step 7 by the proper plasticity reduction factors of Step 6 to I obtain the amplified inelastic stress components, cip. Proceed to Step 9b. Gip= cisl/ri I
*Buckling evaluation by formula See -1710. *Buckling evaluation by bifurcation analysis See -1720 or -1730.
U Step 9a: (a) If the total combined stresses of Step 2 include any discontinuity stresses, follow the procedures of -1711. Step 9b: (a) Perform axisymmetric shell of revolution or three-dimensional thin shell buckling evaluation per
-1720 or -1730 for each set of amplified stress I
(b) Calculate classical uniaxial buckling values per components, cis from Step 7.
-1712.
(c) Check elastic and inelastic relationships of -1713. (d) Size stiffeners per -1714. (b) For each set of amplified stress components where oe T00 is less than one, set oep = 0 and Orý perform buckling evaluation. I (c) For each set of stress components where ile or
'ot) is less than one, set o~p = 0 and perform buckling evaluation.
I I All interaction relationship satisfied? Yes Values of Zc for all load conditions greater than 1.0 for local buckling and 1.2 for stringer buckling or general instability? I Check localized buckling for concentrated loads on the shell and provide local stiffening, if needed.
~~Stop / I NO Modify design - Start with Step 1. F NO I
_6 (N- I,4-
)
I Cor~vrinr.IASrA Irlernali-nal Plov,-d bv iHS rlder -esI, r.912 NcriprO-oulrr., flt..Orr'flg pe~rlleoI -in.!h Derinýe I ImIF LicenseeE.:elo,99 192-9101 tjsir=+/-kuc~esl.:.n K-1
ý.0!1,11FDDDC.Q1!23!-007 i -- ,7t,5 I
APPLICANT'S EXHIBIT 43 upper and lower 95% confidence limits for ji 7 6 E 5 %%oo
-
0 4 L_. Cr 3 2 1 0'- 0.5 0.6 0.7 0.8 0.9 1.0 1.1 Bay 19 UT measurements, in
-- APP- IC m - m - m m m APPLICANT'S EXHIBIT 44
Bay 13- 2006 Spatial Relationship Of Internal Grids and External Locally Thin Areas Inches 4 -72 -60 -41a Grid 13C 48 60 72 Grid 13D (average 1142 mils in 2006) (average Top 1047, Bottom A 904, All 968 In 2006) A U, C)
-E1 A 9 A
A, U Point 15 A M M-3 (666 mils In 2006) Grid 13A A (average 846 mils in 2006) J This 36" b 36" Criteria Tray Area ti Squares are less than 0.736" Triangles are greater then 0.736" --- - m m - m - m - - m - - -- -
- ,m m - -
m - - m - Bay 17 - 2006 Spatial Relationship Of Internal Grids and External Locally Thin Areas Inches 4) Squares are less than 0.736" Triangles are greater then 0.736"
Bay 19- 2006 Spatial Relationship Of Internal Grids and External Locally Thin Areas Inches V 'U 41 4 -72 -60 -4_ -24 -12 12 24 AS A" 00 72 Grid 19C Grid 19B (average 824 (average 848 mils In 2006) mils In 2006) -10 _) 721 Mils 9 (D 728 Mils 11 SA A 712 Mils A This 36" b 36" Criteria Tray Area '10 736 Mils Grid 19A (average 807 mils in 2006) A A A Squares are less than 0.736" Triangles are greater then 0.736" m m, m m m m m m m- m m m- m = m m
APPLICANT'S EXHIBIT 45 CASE N-513 CASES OF ASME BOILER AND PRESSURE VESSEL CODE Approval Date: August 14, 1997 See Numeric Index for expiration and any reaffirmation dates. Case N-513 (d) A flaw evaluation shall be performed .to determine Evaluation Criteria for Temporary Acceptance. of the conditions for flaw acceptance. Section 3.0 provides Flaws in Class 3 Piping accepted methods for conducting the required analysis. Section XI, Division. 1 (e) Frequent' periodic inspections of no more than 30 day intervals shall,be used to determine if flaws Inquiry: What rules may be. used for temporary ac- are growing and to establish the time at which the ceptance of flaws, including through-wall' flaws, in detected flaw will reach the allowable size. Alterna-moderate. energy Class 3 piping, without repair or tively, a flaw growth evaluation may be performed to replacement? predict the time at which the detected flaw will grow to the allowable size. When a flaw growth analysis is Reply: It is the opinion of the Committee that the used to establish the allowable time for temporary following rules may be used to accept flaws, including operation, periodic examinations of no more than 90 through-wall flaws, in moderate energy Class 3 piping, day intervals shall be conducted to. verify the flaw without repair or replacement for a limited time, not growth analysis predictions. exceeding the time to the next scheduled outage. (f) For through-wall leaking flaws, leakage shall be observed by daily walkdowns to confirm the analysis conditions used in the evaluation remain valid. 1.0 SCOPE (g) If examinations reveal flaw growth ,rate to *be (a).,These requirements apply to the ASME. Section unacceptable, a repair or replacement shall be per-III, ANSI B31.1, and ANSI B31.7 piping, classified formed. by the. Owner as Class 3. (h) Repair or replacement shall be performed no (b) The provisions of the Case apply to Class 3 later than when the predicted flaw size from either piping whose maximum operating temperature does not periodic inspection or by flaw growth analysis exceeds exceed 200'F and whose maximum operating pressure the acceptance criteria of Section 4.0, or the next does not exceed 275 psig. scheduled outage, whichever occurs first. Repair or (c). The following flaw evaluation criteria are permit- replacement shall be in accordance with IWA-4000 or ted for pipe and tube. The flaw evaluation criteria are IWA-7000, respectively, in Editions and Addenda prior permitted for adjoining fittings and flanges to a distance to the 1991 Addenda; and, in the 1991 Addenda and of (Rot)" 2 from the weld centerline. later, in accordance with IWVA-4000. (d) The provisions of this Case demonstrate the (i) Evaluations and examination shall be documented integrity of the item and not the consequences of in accordance with IWA-6300. The Owner shall docu-. leakage. It is the responsibility of the Owner to demon- ment the use of this Case on the applicable data strate system operability considering effects of leakage. report form. 2.0 PROCEDURE 3.0 FLAW EVALUATION (a) The" flaw: geometry shall be characterized by (a) For planar flaws, the flaw shall be bounded by volumetric inspection methods or by physical measure- a rectangular or. circumferential planar area in accord-ment: The' full pipe circumriference at the flaw location ance with the methods described in Appendix C or shall be inspected to characterize the length and depth Appendix H. IWA-3300 shall be used to determine of all flaws in the pipe section. when multiple proximate flaws are to be evaluated as (b) Flaw shall be classified as planar or nonplanar. a single flaw. The geometry of a through-wall planar (c). When multiple flaws, including irregular (com- flaw is shown in Fig. 1. pound) shape flaws, are' detected, the interaction and (b) For planar flaws in austenitic piping, the evalua-combined area loss of flaws in a given pipe section tion procedure in Appendix C of Section XI, Division shall be accounted for in the flaw evaluation. 1, shall be used. Flaw depths up to 100% of wall 765
I CASE (continued) I N-513 CASES. OF ASME BOILER AND PRESSURE VESSEL CODE II of= (Sy + S.)I2 (3) t2 where p = is pressure for the loading condition I t D, = is pipe outside diameter of= is the flow stress Sy= is the code yield strength I
& = is the code tensile strength and SF= is the safety factor as specified in C-3420 of Appendix C I
Material properties at the temperature of interest shall be used. (c) For planar flaws in ferritic piping, the evaluation procedure in Article H-7000 of Appendix H, Section XI, Division 1, shall be used. Flaw depths up to 100% I (a) Circumferential Flaw of wall thickness may be evaluated. When through-wall flaws are evaluated, the formulas for evaluation given in Articles H-73.00 and H-7400 of Appendix H may be used, but with values for Fm,, Fb, and F I applicable to through-wall flaws. Relations for Fmo, Fb, and F that take into account flaw shape and pipe geometry (Rit ratio) shall be used. The appendix to this Code Case provides equations for Fm, Fb, and F for a selected range of Rit. Geometry of a through-( I wall crack is shown in Fig. 1. (d) For nonplanar flaws, the pipe is acceptable when the remaining pipe thickness (t,) is. greater than or equal to the minimum wall thickness tmi,): I (b)Axial Flaw tMinF pDo 2(S + 0.4p)) (4) Il where FIG. 1 THROUGH-WALL FLAW GEOMETRY p = is the maximum operating pressure at flaw Io-cation I S = is the allowable stress at operating temperature Where appropriate, bending load at the flaw location shall be considered in the determination of tmi,. When ( I thickness may be evaluated. When through-wall circum-ferential flaws are evaluated, the formulas for evaluation given in Articles C-3320 of Appendix C may be used, with the flaw. penetration (alt) equal to unity. tp is less than t,,,i,, an evaluation shall be performed as given below. The evaluation procedure is a function of the depth and the extent of the affected area as I When through-wall axial flaws are evaluated, the allow- illustrated in Fig. 2. able flaw length is:
..t, (1) When the width of wall thinning that exceeds Wn, is less than or equal to 0.5 (Rotmin,)t, where R& is the outside radius and. Wm, is defined in Fig. 2, I 'I the flaw can be classifiedas a planar flaw and evaluated ealt 1.58 {(') 1-'. (1) under para. 3(a) through para. 3(c). When the above requirement is not satisfied, (2) shall be met.
(2) When the transverse extent of wall thinning o-h = pDoI2t (2) 766 that exceeds t,,,, L (,, is not greater than (Rotmim)12, I i
CASE (continued) N-513 CASES OF ASME BOILER AND PRESSURE VESSEL CODE (. FIG. 2 ILLUSTRATION OF NONPLANAR FLAW DUE TO WALL THINNING tao,, is determined from Curve 1 of Fig. 3, where Lm(,) When the above requirements are not satisfied, (4) is defined in Fig. 2. When the above requirement is shall be met. not satisfied, (3) shall be met. (4) When the requirements of (1), (2) and (3) (3) When the maximum extent of wall thinning above are not satisfied, totoC is determined from Curve that exceeds train, L,,, is less than or equal to 2.65 2 of Fig. 3. In addition, taloc shall satisfy the following (Rot,.n)" 2 and tn.,m is greater than 1.13t,,i, t.1o' is equation: determined by satisfying both of the. following equa-tions: [0.5 +()(] taloc 1 4 1.54-' ý,ý[ nom1
> - II- - 1+1.0 (5) 1.8 Imn L [ t,,.,,
where o'b is the nominal pipe longitudinal bending stress resulting from all primary pipe loadings. taloc 0.353L.a (6) (e) For nonferrous materials, nonplanar and planar tmin -,f~ flaws may be evaluated following the general approach 767
I CASE (continued) I N"513 CASES OF ASME BOILER AND PRESSURE VESSEL CODE 1.0 i 0.8 . 0.6
.0 0.4 0.2 I
0 0 1 2 3 4 5 6 7 8 I FIG. 3 ALLOWABLE WALL THICKNESS AND LENGTH OF LOCALLY THINNED AREA I of (a) through (d) above. For ductile materials, the (a) From the engineering evaluation, the most suscep- (I approach given in (b) may be. used; otherwise, the approach given in (c) and (d) should be applied. Safety factors provided, in Section 4.0 shall be used. It is the tible locations shall be identified. A sample size of at least five of the most susceptible and accessible loca-tions, or, if fewer than five, all susceptible and accessible I responsibility of the evaluator to establish conservative locations shall be examined within 30 days of detecting estimates of strength and fracture toughness for the the flaw. piping material. (b) When a flaw is detected, an additional sample of the same size as defined in 5(a) shall be examined. (c) This process shall be repeated within 15 days 4.0 ACCEPTANCE CRITERIA for each successive sample, until no significant flaw The piping containing a circumferential planar flaw is detected or until 100% of susceptible and accessible is acceptable for continued temporary, service when locations have been examined. flaw evaluation provides a safety margin, based on load, of a factor of 2.77 for Level A and B and 1.39 6.0 NOMENCLATURE for Level C and D service loading conditions.. Piping containing, a nonplanar flaw is acceptable for. continued c = half crack length temporary service if tp > t,,o,, where toL, is determined from Section 3(d). D, = outside pipe diameter F= nondimensional stress intensity factor for I Lower safety factors may be used,, provided that a through-wall axial flaw under hoop stress detailed engineering evaluation of continued operation demonstrates that lower safety factors are justified. Fb= nondimensional stress intensity factor for through-wall circumferential flaw under pipe bending. stress I F,= nondimensional stress intensity factor for 5.0 AUGMENTED EXAMINATION through-wall circumferential flaw under mem-An augmented volumetric examination or physical measurement to assess degradation of the affected sys-brane stress e = total crack length 2c I tem shall be performed as follows: 768 Cl,,= allowable axial through-wall length I I
CASE (continued) N-513 CASES OF ASME BOILER AND PRESSURE VESSEL CODE L= maximum extent of a local thinned area with t
< tron Lm = maximum extent of a local thinned area with t Lm(O) axial extent of wall thinning below tmi, L,(o,= circumferential extent. of wall thinning below p = maximum operating pressure at flaw location R= mean pipe radius R& = outside, pipe radius S= allowable stress at operating temperature S,,= code specified ultimate tensile strength Sy= code specified yield strength t = wall thickness tatoc= allowable local thickness for a nonplanar flaw that exceeds tmi. = minimum wall thickness required for pressure loading = nominal wall thickness tp = minimum remaining wall thickness W,ý = maximum extent of a local thinned area perpen-dicular to Ln with t. < trin A = nondimensional half crack length for through-wall axial flaw of= material flow stress orh= pipe hoop stress due to pressure o-b = nominal longitudinal bending stress for primary loading without stress intensification factor 4= half crack angle for through-wall circumferen-tial flaw C,
769
CASE (continued) CASES OF ASME BOILER AND PRESSURE VESSEL CODE N-513 I I RELATIONS FOR F,., Fb, AND F FOR THROUGH-APPENDIX I I WALL FLAWS 2 B,,= 7.09987 - 4.42394 (R/t) + 0.21036 (R/t) 3
- 0:00463 (R/t) 1-1.0 DEFINITIONS Cm 7.79661 + 5.16676 (RIt) - 0.24577 (R/t)2 3
For through-wall flaws, the crack depth (a) will be + 0.00541 (R/t) 2 replaced with half crack length (c) in the stress intensity Ab= -3.26543 + 1.52784 (R =It) - 0.072698 (R/t) 3 factor equations in Articles H-7300 and H-7400 of + 0.0016011 (R/t) 2 Section XI, Appendix H. Also, Q will be set equal to Bb= 11.36322 - 3.91412 (R/t) + 0.18619 (R11) 3 unity in Article H-7400. - 0.004099 (R/t) 2 Cb= -3.18609 + 3.84763 (Rlt) - 0.18304 (R/t) 3 ( 1-2.0 CIRCUMFERENTIAL FLAWS For a range of Rit between 5 and 20, the following
+ 0.00403 (R/t)
Equations for F,, and Fb are accurate for Rit between 5 and 20 and become increasingly conservative for RI I t greater than 20. 'Alternative solutions for. Fm and Fb equations for Fm and Fb may be used: may be used when Rit is greater than 20. 5 5 35 Fm I + Am (01/r)" + Bm (19/,)2. + CL (0/I') " 1-3.0 AXIAL FLAWS 5 5 35 Fb = I + Ab (6?/r)" + Bb (/Vr)2" + Cb (19/7r) - For internal pressure loading, the following equation for F may be used: where 60= Half crack angle = OR where F= I + 0.072449A + 0.64856A2 - 0.2327A3 + 0.038154A4 - 0.0023487A' I R= Mean pipe radius A= ci(Rt)'12 ( and t= Pipe wall thickness 2 c = half crack length The equation for. F is accurate for A between 0 and i Am= -2.02917 + 1.67763 (R/t) -. 0.07987 (R/t) 5. Alternative solutions for F may be used when A is 3
+ 0.00176 (R/t) greater than 5.
I 1 I 771 I I
.APPLICANT'S EXHIBIT 46 SSINS No.: 6820 OMB No.: 3150-0011 NRCB 87-01 UNITED STATES NUCLEAR REGULATORY COWISSION OFFICE OF .NUCLEAR REACTOR REGULATION WASHINGTON,. D.C. 20555 ,July 9, 1987 NRC BULLETIN NO. 87-01: THINNING OF PIPE WALLS IN NUCLEAR POWER PLANTS Addressees:
All licensees for nuclear power plants holding an operating license or a construction permit.
Purpose:
The purpose of this bulletin is to request that licensees submit information concerning their programs for monitoring the thickness of pipe walls in high-energy single-phase and two-phase carbon steel piping systems. Description of Circumstances: On December 9, 1986, Unit 2 at the Surry Power Station experienced a cata-strophic failure of a main feedwater pipe, which resulted in fatal injuries to four workers. This event was reported in IE Information Notice (IN)86-106, "Feedwater Line Break," on December 16, 1986; IN 86-106, Supplement 1, on February 13, 1987; and IN 86-106, Supplement 2, on March 18, 1987. The licensee-submitted Licensee Event Report (LERI P6-020-00 on January 8, 1987; Revision 1, LER 86-020-4l, on January 14, 1987; and Revision 2, LER 86-020-02, on March 31, 1987. A comprehensive report entitled "Surry Unit 2 Reactor Trip and Feedwater Pipe Failure Report," was attached to the updated LEP, Revisions 1 and 2. The findings of NRC's Augmented Inspection Team were issued on February 10, 1987, in XE Inspection Report Nos. 50-280/86-42 and 50-281/86-42. Investigation of the accident and examination of data by the licensee, NRC, and others led to the conclusion that failure of the piping was caused by erosion/corrosion of the carbon steel pipe wall. Although erosion/corrosion pipe failures have occurred in other carbon steel systems, particularly In small diameter piping in two-phase systems and in water systems containing suspended solids, there have been few previously reported failures in large diameter systems containing high-purity water. Consistent with general indus-try practice, the licensee did not have in place an inspection' program for examining the thickness of the walls of feedwater and condensate piping. Main feedwater systems, as well as other power conversion systems, are impor-tant to safe operation. Failures of active components in these systems, for example, valves or pumps, or of passive components such as piping, can result in undesirable challenges to plant safety systems required for safe shutdown and accident mitigation. Failure of high-energy piping, such as feedwater O3LO~u~c e,~
flPCd 87-01 July 9, 1987 Page 2 of 3 system piping, can result in complex challenges to operating staff and the plant because of potential systems interactions of high-energy steam and water a with other systems, such as electrical distribution, fire protection, and security systems. All licensees have either explicitly or implicitly committed to maintain the functional capability of high-energy piping systems that are a part of the licensing basis for the facility. An important part of this com-I mitment is that piping will be maintained within allowable thickness values. Actions Requested: Within 60 days from the receipt of this bulletin, licensees are requested to provide the following information concerning their programs for monitoring the U wall thickness of pipes in condensate, feedwater, steam, and connected high-energy piping systems, including all safety-related and non-safety-related piping systems fabricated of carbon steel:
- 1. Identify the codes or stardards to which the piping was designed and fabricated. I
- 2. Describe the scope and extent of your programs for ensuring that pipe wall thicknesses are not reduced below the minimum allowable thickness.
Include in the description the criteria that you have established for:
- a. selecting points at which to make thickness measurements
- b. determining how frequently to make thickness measurements
- c. selecting the methods used to make thickness measurements
- d. making replacement/repair decisions
- 3. For liquid-phase systems, state specifically whether the following factors have been considered in establishing your criteria for selecting points at which to monitor piping thickness (Item 2a):
- a. piping material (e.g., chromium content)
- b. piping configuration e.g., fittings less than 10 pipe diameters apartl
- c. pH of water in the system (e.g., pH less than 10)
- d. system temperature (e.o., between 190 and 5000Ft ft/s)
U e.
- f. oxygen bulk.
fluid velocity content ý(e.g., than systemgreater in the(e.g., 10 content oxygen Tess than 50 ppb)
- 4. Chronologically list and summarize the results of all inspections that I have been performed, which were specifically conducted for the purpose of identifying pipe wall thinning, whether or not pipe wall thinning was discovered, and any other inspections where pipe wall thinning was dis-covered even though that was not the purpose of that inspection.
U
- a. Briefly describe the inspection program and indicate whether it was specificallyintended to measure wall thickness or whether wall thick-ness measurements were an incidental determination.
I
- b. Describe what piping was examined and how (e.g., describe the inspec-tion instrument(s), test method, reference thickness, locations examined, I
means for locating measurement point(s) in subsequent inspections!.I I
NRCB 87-01 July 9, 1987 Page 3 of 3
- c. Report thickness.measurement results aud note those that were identi-fied as unacceptable and why.
- d. Describe-actions already taken or planned for p4 ping that has been found'to have a nonconforming wall thickness. If you have performed a failure analysis, include the results of that analysis. Indicate whether the actions involve repair or replacement, including any change of materials.
- 5. Describe any plans either for revising the present or for developing new or additional programs for monitoring pipe wall thickness.
The written report shall be submitted to the appropriate Regional Administrator under oath or affirmation under provisions of Section 182a, Atomic Energy Act of 1954, as amended. In addition, the original of the cover letter and a copy of the report shall be transmitted to the U.S. Nuclear Regulatory Commission, Document Control Desk, Washington, D.C. 20555 for reproduction and distribution. This request for information was approved by the Office of Management and Budget under blanket clearance number 3150-0011. Comments on burden and duplication may bedirected to the Office of Management and Budget, Reports Management, Room 3208, New Executive Office Building, Washington, D.C. 20503. NRC intends to summarize the information collected under this bulletin and study it to help determine if additional actions are required by the staff and/or industry. The information will be analyzed and placed in the PDR. If you have any questions about this matter, please contact the Regional Administrator of the appropriate NRC regional office or the technical contacts listed below. 6har s E. Rossi, D c& Divi ion of Operati n I Events Assessment Office of Nuclear R tor Regulation. Technical Contacts: Paul Wu, NRR (301) 492-8987 Conrad McCracken, NRR (301) 492-7042
Attachment:
List of Recently Issued Bulletins
I, Attachient July g. 1N9 LIST OF RECIITLY ISSUID BULLETINS qu~lltin UOTAOT Sublect ssiuenco, Issued to
*Defictive Teletherapy Timor 10/29/86 A11 ARC lIcensees that Ray Not Terminate.Dose. authorized to use c*balt4D teletherapy units Potential Failure of Multiple 10/8/86 All: facilities 86-07 ECCSjPumps Due.to Single .holding an OL or Failure of Air-Op'rated Volve CP' in. Mnimum Flow RecirCulation Line 86-03 Static *0' Ring Differential 7/18/86 AlI power reactor Pressure Switches facilities holding an OL or CP ifnimu. Flow Logic Problems 5/3/986 All GEBR #acilities That Could Disable AuR Pumps holding an OL or CP 85-03 Rotor-Operated Valve Cmmon 11/15/85 All Power reactor Pode>:Faflures During Plant. facilities holding Transients Due to Improper.
I on1t or CP Switch Settings 85-02 Undervoltage Trip Attachments 11/5/85 All power reactor of Westinghouse 38-50 Type facilities holding Reactor Trip Breakers an OL or CP 85-01 Steam Binding of Auxiliary 10/29/85 Nuclear power
- Feedwater Pumps facillties and CPs listed In Attachment I for action; all other nuclear power facilities for information O. 4 Operating License CP - Construction Permit UNITED STATES NUCLEAR REGULATORY COMMISSION FIRTCLASS MAIL1 IPOSTAGE & FEiS PAUD WASHINGTON, D.C. 20555 USNACI j WASH. D.C.
PERI'o G47 OFFICIAL BUSINESS PENALTY FOR PRIVATE USE. t300
NRCB 87-01 July 9, 1987 Page 3 of 3
- c. Report thickness measurement results and note those that were identi-fied as unacceptable and why.
d.. Describe actions already taken or planned for piping:.that has been found to have a nonconforming wall thickness. If, you have performed a failure analysis, include the results of that analysis. Indicate whether the actions involve repair or replacement, including any change of materials.
- 5. Describe any plans either for revising, the present.or for developing new or additional'programs for monitoring pipe wall thickness..
The written report shall be submitted to the appropriate Regional Administrator under oath or affirmation under provisions of Section 18?a, Atomic Energy Act. of 1954, as amended. In addition,the original of the.cover letter and a copy of the report shall be transmitted to the U.S. -Nuclear Regulatory Commission, Document Control Desk, Washington, D.C. 20555 for reproduction and distribution. This request.for information was approved by the Office of Management and Budget under blanket clearance number 3150-0011. Comments on burden and duplication may be directed to the Office of Management and Budget, Peports Management, Room 3208, New Executive Office Building,, Washington, D.C. 20503. NRC intends to summarize the information collected under this bulletin and study it to help determine if additional actions are required by the staff and/or industry. The information will be analyzed and placed in the POR. If you have any questions about this matter, please contact the Regional Administrator of the appropriate NRC regional.office or the technical contacts listed below. Charles E. Rossi, Director Division of Operational Events Assessment Office of Nuclear Reactor Regulation Technical Contacts: Paul Wu, NRR (301) 492-8987 Conrad McCracken, NRR (301) 492-7042
Attachment:
List of Recently Issued Bulletins .
- SEE PREVIOUS CONCURRENCES D* NRR -*C/OGCB:D0EANFRR CERo si CHBerlinger o0Z /87 07101/87
- ECEB:DEST:NRR *AC/ECEB:DEST:NRR *EAD/DEST:NRR. EDYDEST:NRR *PPMB:ARM PWu CMcCracken JRichardson LShao TechEd 06/29/87. 06/29/87 06/29/87 06/30/87 06/29/87
I IEB 87-XX June xx, 1987 I Page 3 of 3
- c. Report thickness measurement results and. note those that were identi-I fied as unacceptable and why.
- d. Describe actions already taken or planned for piping that has been
.I found to have a.'nonconforming wall thickness. If you have performed a failure6:analysis, include the results of that analysis. Indicate whether the actions involve .-repair or replacement, including any .change of materials.
I
- 5. Describe any plans either for revising the present or for developing new or additional programs:for monitoring p.ipe wall thickness.
I The written report shall be submitted to the appropriate Regional Administrator under oath or afflrr.ation under provisions of Section 182a, Atomic Energy Act of 1954, as, amended. In addition, the original of the cover letter and a copy of the report shall be transmitted to the U.S. Nuclear Regulatory Commission, I Document Control'Desk, Washington, D.C. 20555 for reproduction and distribution. I This.request'for information was approved:by the Office of Management and Budget under blanket clearance number 3150-0011. Comments on burden and duplication may be directed to the Office of. Management and Budget, Reports I Management, Room 3208, New Executive Office Building, Washington, D.C. 20503. NRC :intends to summarize the information collected under this bulletin and I study it to help determine if additional actions are required by the staff and/or industry. The information will be analyzed and placed in the PDR. If you have any questions about this matter, please contact the Regional I Administrator of the appropriate NRC regional office or the technical contact listed.below. I Charles E. Rossi, Director I Division of Operational Event Assessment Office of Nuclear Reactor Regulation I Technical Contacts: Paul Wu, NRR (301) 492-8987 Conrad McCracken, NRR I (301) 492-7042 Attachments:
- 1. IE IN 86-106 I
2.. IE IN.86-106, Supplement 1
- 3. IE IN 86-106, Supplement 2
- 4. List of:Recently Issued IE Bulletins 'i
- SEE PREVIOUS CONCURRENCES Cl GBDfA: NRI D/DOEA:NRP CERossi 06/ /87 CHBerlinger 0?///87 U
- ECEB:DEST:NRR *AC/ECEB:DEST:NRR *EAD/DEST:NRR *D/DEST:NRR *PPMB:ARM PWu 06/29/87 CMcCracken 06/29/87 JRichardson 06/29/87 LShao 06/30/87 TechEd 06/29/87 I
IEB 87-XX June xx, 1987 Page 3 of 3
- c. Report thickness measurement results and note those which were identified as unacceptable and why.
- d. Describe. actions already taken or planned for-piping which has been found to have a nonconforming wall thickness. If you have performed a failure analysis, include the results of that analysis. Indicate whether the actions involve repair or replacement, including any change of materials.
- 5. Describe any plans either for revising the present or for developing new or additional programs for monitoring pipe wall thickness.
The written report shall be submitted to the appropriate Regional Administrator under oath or affirmation under provisions of Section 182a, Atomic Energy Act of 1954, as amended. In addition, the original of the cover letter and a copy of the report shall be transmitted to the U.S. Nuclear Regulatory Commisslon, Document Control Desk, Washington, D.C. 20555 for reproduction and distribution. .This request for information was approved by the Office of Management and Budget under blanket clearance number 3150-0011. Comments on burden and duplication may be directed to the Office of Management and Budget, Reports Management, Room 3208, New Executive Office Building, Washington, D.C. 20503. NRC intends to summarize the information collected under this bulletin and study it to help determine if additional actions are required by the staff and/or industry. The information will be analyzed and placed in the PDR. If you have any questions about this matter, please contact the Regional. Administrator of the appropriate NRC regional office or the technical contact listed below. Charles E. Rossi, Director Division of Operational Event Assessment Office of Nuclear Reactor Regulation Technical Contacts: Paul Wu, NRR (301) 492-8987 Conrad McCracken, NRR (301) 492-7042 Attachments:
- 1. IE IN 86-106
- 2. IE IN 86-106, Supplement 1
- 3. IE IN 86-106, Supplement 2
- 4. List of Recently Issued IE Bulletins
/DOEA:NRR C/OGCB:DOEA:NRR CERossi CIPBerl inger 06/ 7 06/ /87 ECEB:DEST:NRR CEB:DEST:NRR EAD/DEST:-R D/ RR PPMB :AR PWu CMcCracken JRichards LSho TechEdP 06/,2-1/87 06 t/87 O6/8/B7 06 /87 06Z /e7
APPLICANT'S EXHIBIT 47 UNITED STATES NUCLEAR REGULATORY COMMISSION 4WASHINGTON, D. C. 20555 May 2, 1989 TO: ALL HOLDERS OF OPERATING LICENSES'OR CONSTRUCTION PERMITS FOR NUCLEAR:POWER PLANTS
SUBJECT:
EROSION/CORROSION-INDUCED PIPE.WALL THINNING (GENERIC LETTER 89- 08) ... Pursuant to I CFR50.54(f), the U.S."Nuclear Regulatory fCommiission (NRC) is requiring information to assess safe operation of reactors when erosion/ corrosion significantly degrades piping and components of high-energy carbon steel piping systems. The principal concern is whether the affected plants continue to meet their licensing basis when erosion/corrosion degrades:the pressure boundary to below the applicable code design value. Main feedwater systems, as well as.other power conversion systems, are important to safe operation. **Failures in these systems of active components such as Valves or pumps or of passive components such as piping can result in undesir-able challenges to plant safety systems required for safe shutdown and accident mitigation. Failure of high-energy piping, such as feedwater system piping, can result in complex challenges to.operating staff and the plant because of potential system interactions of high-energy-steam and water with other systems, such as electrical distribution, fire protection, and security. All licensees have committed to adhere to criteria, codes and standards for high-energy piping. systems described in licensing-documents. Such commitments are a part of the licensing basis for the facility. An important part of this commitment is that piping will be maintained within allowable thickness values. Our concerns regarding this issue were prompted by incidents at Surry Unit 2 and the Trojan plant. The Surry incident occurred on December 6, 1986, and It was caused by catastrophic failure of feedwater piping. The Trojan incident was discovered in June 1987, which was the first time that pipe wall thinning led to piping replacement in the safety-related portion of the feedwater lines. In addition to these two cases, Incidents of pipe wall thinning or rupture because of erosion or erosion/corrosion have been reported at many other nuclear power plants. In many of these cases, the licensees had inspected the two-phase lines for some years, but it was not until 'the Surry incident that they started to examine some single-phase lines. Many'licensees discovered pipe wall thinning in the single-phase lines. Some of the reported incidents are listed below:
- 1. A pipe rupture at Haddam Neck occurred in March 1985. The pipe ruptured downstream of a normal'levelcontrol valve for a feedwater heater. The actual rupture was approximately 1/2 inch by 2 1/4 inches, and the failure was caused by flow impingement. The eroded section of pipe was replaced.
In addition, corresponding pipes of similar systems were examined.
- 2. A catastrophic pipe rupture at Surry.Unit 2 occurred in December 1986.
The break was located in an elbow in the 18-inch line about 1 foot from the 24-inch header. A 2- by 4-foot section of the wall of the suction I *40""f27 9
Generic Letter 89-08 May 2,.-1989 line. to the A main feedwater pump was blown out. Investigation of the accident and examination of data by the licensee, NRC, and others led to the conclusion that failure of the piping was caused by erosion/corrosion of the carbon steel pipe wall.
- 3. During the June 1987 outage at the Trojan Nuclear Plant, it was discovered that at least two areas of the straight sections of the main feedwater I
piping system had experienced wall thinning to an extent that the pipe wall thickness would have reached the minimum thickness required by the design code (ANSI B31.7, "Nuclear Power Piping") during the next refueling cycle. These.areas are in safety-related portions of the ASME Class 2 piping inside the containment. In addition, numerous piping components of the.nonsafety-related portions of the feedwater lines were also found to have suffered extensive wall thinning... I
- 4. During the September 1988 outage, the licensee for Surry Unit 2 discovered that pipe wall thinning had occurred more rapidly than expected. On the suction side of one of the main feedwater pumps, an elbow installed during the 1987 refueling outage lost 20 percent of its 0.500-inch wall in 1.2
..years. In addition, wall thinning is continuing in safety-related main feedwater piping and in other nonsafety-related condensate piping. The 3
exact cause of the accelerated wall thinning is still under investigation by both the licensee and the NRC. In -light of the above experiences, the. NRC issued six information notices (86-106 and Supplements 1, 2, and 3; 87-36, and 88-17) and Bulletin 87-01 addressing this problem. The staff review of licensees' responses to the bulletin indicates that the pipe wall thinning problem is widespread for I single-phase and two-phase high-energy carbon steel systems. The systems and components reported as having experienced pipe wall thinning are listed in Section 6 of the attachment to this letter. The staff review also showed that wall thinning in single phase feedwater-condensate systems is more prevalent among pressurized-water reactors (PWRs) but also occurs in boiling-water reactors (BWRs). I The staff audited 10operating plants (7 PWRs and 3 BWRs) in late 1988 to assess Implementation of erosion/corrosion monitoring programs by licensees and to ensure thatregarding activities adequate guidance repair andwasreplacement provided for corrective actions and other of degraded piping and components. Detailed audit findings are described in Section 7 of NUREG-1344, which is enclosed with this letter. In general, all licensees have developed and putI in place an erosion/corrosion monitoring program that meets the intent of NUMARC guidelines (Appendix A of NUREG-1344). In addition, all licensees have completed their. initial examination as recommended by NUMARC. However, the staff found that none of these licensees has implemented formalized procedures or adminis-trative controls to ensure continued long-term implementation of its erosion/ corrosion monitoring program for piping and components within the licensing basis. Therefore, you should provide assurances that a program, consisting of . systematic measures to ensure that erosion/corrosion does not lead to degra-dation of single phase and two phase high-energy carbon steel systems has been implemented. The detailed information should not be submitted for NRC review.
Generic Letter 89-08 May 2, 1989 Additional insight into the phenomena related to erosion/corrosion of carbon steel. components is provided in the enclosure to this letter (NUREG-1344). You are irequired- to submit your response, signed, under oath or affirmation, as 1CFR 50.54(f), within 60 days of receipt of this letter. Your specdfied: 'inIO response wiltlT be used to determine whether your license should be modified, suspended, or revoked. Your response should include information on whether or not you have implemented or intend to implement a long term erosion/corrosion monitoring program that provides assurances that procedures or administrative controls are in place to assure that the NUMARC program or another equally effective program is implemented and the structural integrity of all high-energy (two.phase as well as single phase) carbon steel systems is maintained. If this program is not yet implemented you should include the scheduled imple-mentation date. This request is covered by the Office of Management and Budget Clearance Number 3150-0011, which expires December 31, 1989. The estimated average burden is 200 man-hours per addressee response, including assessing the actions to be taken, preparing the necessary plans, and preparing the response. This estimated average burden pertains only to these identified response-related matters and does .not'include the time for actual implementation of the recommended actions. Send comments regarding this burden estimate or any other aspect of this col-lection of information, including suggestions for reducing this burden, to the Records and Reports Management Branch, Division of Information Support Services, Office of Information Resources Management, U.S. Nuclear Regulatory Commission, Washington, D.C. 20555; and to the Paperwork Reduction Project (3150-0011), Office of Management and Budget, Washington, D.C. 20503. Sincerely, Jaies G. Partlow J A sociate Director for Projects
- Office of Nuclear Reactor Regulation
Enclosures:
- 1. NUREG-1344
- 2. Listing of Recently Issued Generic Letters
LIST OF RECENTLY ISSUED GENERIC LETTERS ENCLOSURE2 3 Generic Date of Letter No. Subject Issuance Issued To .W I I 89-08 ISSUANCE OF GENERIC LETTER 5/2/89 LICENSEES TO ALL I 89-08: EROSION/CORROSION - POWER REACTORS, INDUCED PIPE WALL THINNING 10 CFR§50.54(f) BWRS, PWRS, AND VENDORS IN-ADDITION I TO GENERAL CODES APPLICABLE TO GENERIC LETTERS I 89-07 GENERIC LETTER 89-07, POWER 4/28/89 LICENSEES TO ALL REACTOR SAFEGUARDS CONTINGENCY PLANNING FOR SURFACE VEHICLE BWRS, PWRS, AND VENDORS IN ADDITION I BOMBS TO GENERAL CODES APPLICABLE TO GENERIC LETTERS ,I 89-06 TASKACTION PLAN ITEM I.D.2 - 4/12/89 LICENSEES OF ALL SAFETY PARAMETER DISPLAY SYSTEM - 10 CFR §50.54(f) POWER REACTORS, BWRS, PWRS, HTGR, I AND NSSS VENDORS IN ADDITION TO GENERAL CODES APPLICABLE TO I GENERIC LETTERS
,I 89-05 PILOT TESTING OF THE 4/4/89 LICENSSES OF ALL FUNDAMENTALS EXAMINATION POWER REACTORS AND APPLICANTS FOR A REACTOR OPERATOR'S LICENSE UNDER 10 CFR PART 55 I
89-04 GUIDANCE ON DEVELOPING 4/3/89 ALL HOLDERS OF LIGHT ACCEPTABLE INSERVICE WATER REACTOR OPERATING TESTING PROGRAMS LICENSES AND CONSTRUCTION PERMITS 89-03 .OPERATOR LICENSING NATIONAL EXAMINATION SCHEDULE 3/24/89 ALL POWER REACTOR LICENSEES AND I APPLICANTS FOR AN 89-02 ACTIONS TO IMPROVE THE 3/21/89 OPERATING LICENSE ALL HOLDERS OF I DETECTION OF COUNTERFEIT OPERATING LICENSES AND FRAUDULENTLY MARKETED PRODUCTS AND CONSTRUCTION PERMITS FOR NUCLEAR I POWER REACTOPS I I
APPLICANT'S EXHIBIT 48 ARTICLE IWE-1000 I SCOPE AND RESPONSIBILITY U IWE-1100 SCOPE to the containment vessel. These components shall .be examined in accordance with the rules of IWB or .IWC, This. Subsection provides the rules and requirements as appropriate to the classification defined by the De-for, inservice inspection, repair, and replacement of sign Specifications. Class MC pressure retaining components and their in-tegral attachments, and of metallic shell and penetration liners of Class CC pressure retaining components and IWE-1230 ACCESSIBILITY FOR their integral attachments in light-water cooled plants. EXAMINATION IWE-1231 Accessible Surface Areas IWE-1200 COMPONENTS SUBJECT TO (a) As a minimum, the following portions of Class EXAMINATION MC containment vessels, parts, and appurtenances and IWE-1210 EXAMINATION REQUIREMENTS Class CC metallic shell and penetration liners shall re-main accessible for either direct or remote visual ex-The examination requirements. of this Subsection amination, from at least one side of the vessel, for the shall apply to Class MC pressure retaining components life of the plant: and their integral attachments. and to metallic shell and (1) openings and penetrations; penetration liners of Class CC pressure retaining com- (2) structural discontinuities; ponents and their integral attachments. These exami- (3) single-welded butt joints from the weld side;
.nations shall apply to surface areas, including welds (4) 80% of the surface area .defined in Table [WE-and base metal. 2500-1, Examination. Category E-A; and (5) surface areas identified in IWE-1240.
(b) The requirements of IWE-1232 shall be met IWE-1220 COMPONENTS EXEMPTED FROM when accessibility for visual examination is not from EXAMINATION the outside surface. The following components (or parts of components) are exempted from the examination requirements of IWE_1232 Inaccessible Surface Areas IWE-2000: (a).vessels, parts, and appurtenances that are outside (a) Portions of Class MC containment vessels, parts, the boundaries of the containment as defined in the and appurtenances that are embedded in concrete or Design Specifications; otherwise made inaccessible during construction of the (b) embedded or inaccessible portions of contain- vessel or asi-a result of vessel repair, modification, or ment vessels, parts, and appurtenances that met the re- ieplacement are exempted from examination, provided: quirements of the original Construction Code; (1) no openings or penetrations are embedded in (c) portions of containment vessels, parts, and ap- the concrete; purtenances. that become embedded or inaccessible as. (2) all welded joints that are inaccessible for ex-a result of vessel repair or replacement if the conditions amination are double buttwelded and are fully, radio-. of IWE-1232 and JWE-5220 are met; graphed and, prior to being covered, are tested for leak (d) piping, pumps, and valves that are part of the tightness using a gas medium test, such as Halide Leak' containment system, or which penetrate or are attached Detector Test; 215
IWE-1242 IWE-1232 1992 SECTION XI - (3) all weld joints that are not double butt welded DIVISION I (a) interior and exterior-:.containment -surface areas
*I*
thatare::subject to accelerated corrosion with no:or~min-I remain accessible.for examination from the weld side; and imal -.corrosion::-allowance or aeas.where.the.absenc (4) the vessel is leak rate tested after completion oi_:'repeated-
. closs of: protective coatings. has- resulted.in of construction, repair, or replacement to the leak rate substantiaL,:corrosion. and: pitting. Typical locations of requirements of the Design Specifications.
(b) Portions of Class CC metallic shell and penetra-tion liners that are embedded in concrete or otherwise such areas are those exposed to standing water, re-peated wetting and drying, persistent leakage, and those with geometries that- permit water accumulation, I condenisation, and microbiological attack. Such areas made inaccessible during construction or as a result of repair or replacement are exempted from examination, provided: may include penetration sleeves, surfaces wetted during refueling, concrete-to-steel shell or liner interfaces, embedment zones, leak chase channels, drain areas, or
!
(1) all welded joints that are inaccessible for ex-sump liners. amination are examined in accordance with CC-5520 and, prior to being covered or otherwise obstructed by (b) interior and exterior containment surface areas that are subject to excessive wear from abrasion or ero-
*-*"I adjacent structures, components, parts, or appurte-sion that causes a loss of protective coatings. defor-nances, are tested for leak tightness in accordance with CC-5536; and (2) the containment is leak rate tested after com-mation, or material loss. Typical locations of such areas are those subject. to substantial traffic, sliding pads or supports, pins or clevises, shear lugs, seismic !I pletion of construction, repair, or replacement to the restraints, surfaces exposed to water jets from testing leak rate requirements of the Design Specifications. operations or safety relief valve discharges, and areas that experience wear from frequent vibrations. I ITE-1240 SURFACE AREAS REQUIRING IWE-1242 Identification of Examination Surface AUGMENTED EXAMINATION Areas IWE-1241 Examination Surface Areas U
Surface areas requiring augmented examination shall Surface areas likely to experience accelerated deg- be determined in accordance with IWE-1241, and shall radation and aging require the augmented examinations be identified in the Owner's Inspection Program. identified in Table BWE-2500-1, Examination Category Examination methods shall be in accordance with E-C. Such areas include the following: IWE-2500(c). I I I p I 216 I
ARTICLE IWE-2000 EXAMINATION AND INSPECTION IWE-2200. PRESERVICE EXAMINATION (3) When a system leakage test is required by IWE-5220, the preservice .examination may be per-(a) Examinations listed in Table IWE-2500-1 shall. formed either prior to or following the test. be completed prior to. initial plant startup. These pre-(e) Welds made as part of a repair or a replacement service examinations shall. include, the pressure retain-program shall be examined in accordance with the re-ing .portions of components not .exempted by IWE-quirements of IWA-4000, except that for welds joining 1220. Class MC or Class CC components to items designed,
.(b) When visual examinations are required, these ex-constructed, and installed to the requirements.of Sec-aminations shall, be performed in accordance-with-[WE-tion in, Class 1, 2, or 3. the examination requirements 2600, following the completion of the pressure test re-of IWB-2000, IWC-2000, or IWD-2000, as applicable, quired. by the .Construction Code and after. application shall apply.
of.protective coatings (e.g., paint) when such coatings are required. . (0 Preservice examination for a repair or replace-ment may be conducted prior to, installation provided: (c), When surface examinations are required by Ta-(1) the examination is performed after ihe pressure ble IWE-2500-1, shop or field examinations in accor-test required by the Construction Code has been com-dance with NE-5000 for Class MC or CC-5500 -for pleted; Class CC may serve in lieu of the on-site preservice (2) the examination is conducted under conditions examinations, provided-and with equipment and techniques equivalent to those (1) the examinations are conducted by the same that are expected to be employed for subsequent in-method with equipment and techniques equivalent to service examinations; and those that are expected to be employed for subsequent (3) the shop or field examination records are, or inservice examinations; can be, documented and identified in a form consistent (2) the shop or field examination records are, or. with that required by. IWA-6000. can be, documented and identified in a form consistent (g) When paint or coatings are reapplied, the. con-with those required in IWA-6000; and dition of the new paint or coating shall be documented (3) the examinations are performed after the pres-in the preservice examination records. sure test required by the Construction Code has been completed. (d) When a vessel, liner, or a portion thereof is re- IWE-2400 INSPECTION SCHEDULE. paired or replaced during the service- lifetime of a plant, the preservice examination requirements for the vessel IWE-2410 INSPECTION PROGRAM repair or replacement shall be met.. Inservice examinations and system pressure tests (1) When the repair or replacement is performed may be performed during plant outages such as re-while the plant is. not in service, the preservice ex- fueling shutdowns or maintenance shutdowns. The re-amination shall be performed prior to the resumption quirements of either Inspection Program A or Inspec-of service. tion Program B shall be met. (2) When the repair or replacement is performed while. the plant. is in service, the preservice examination IWE-2411 Inspection Program A may be deferred to the next scheduled plant outage, provided nondestructive examination in accordance. (a) With the exception of the examinations that may with the approved repair program is performed. be deferred until the end of an inspection interval, as 217
I I'WE-2411 1992 SECTION XI - DIVISION I IWE-2500 I TABLE IWE-2411-1 INSPECTION PROGRAM A TABLE IWE-2412-1 INSPECTION PROGRAM B
"...I Inspection Period, Minimum Maximum Inspection Period, Inspection Interval 1st Calendar Years of Examinations Examinations Plant Service 3
Completed, % Credited, % i00 100 Inspection Calendar Years of Plant Service, . Interval Within the Interval Minimum Examinations Completed, % Maximum Examinations Credited, % U Ist 3 16 34 2nd 7 10 33 100 .100 67 7 10 50 100 67 100 I 3rd 13 16 34 Successive 3 16 34 17 20 23 40 66 100 50 75 100 7 10 50 io 67 100 I 4th 27 8 16 30 33 37 25 50 75 34 67 100 accordance with IWE-3000, and the component is found to be acceptable for continued service, the areas
=II 40 100 .. , containing such flaws, degradation, or repairs shall be reexamined during the next inspection period listed in the schedule of the inspection program of IrE-241 -
I or. IWE-2412, in accordance with Table IWE-2500-1, specified in Table IWE-2500-1, the required exami-
.nations shall be completed during each successive in- .spection interval, in accordance With Table 1WE-241 1-].
Examination Category E-C. (c) When the reexaminations required by IWE-2420(b) reveal that the flaws, areas of degradation, or I Following completion of Program A after 40 years, repairs remain essentially unchanged for three consec-successive inspection intervals shall follow the :10 year inspection, interval of Program B. utive inspection periods, the. areas containing such flaws, degradation, or repairs no longer require aug- .U (b) The inspection period specified in IWE-241 1(a) mented examination in accordance with Table IWE-may be decreased or extended by .as much as 1 year 2500-1, Examination Category. E-C. to enable an inspection to coincide with a plant outage, within the limitations of -WA-2430(c). IWE-2430 ADDITIONAL EXAMINATIONS I IWE-2412 Inspection Program B - (a) Examinations performed during any one inspec-tion that reveal flaws or areas of degradation exceeding U (a) With the exception of the examinations that may the acceptance standards of Table lWE-3410-1 shall be be deferred until the end of an inspection interval, as specified in-Table IWE-2500-l,. the required exami-nations shall be completed during each successive in-extended to include an additional number of exami-nations within the same category approximately equal to the initial number of examinations during the in-I I spection interval, in accordance with Table MWE-241 2-i. spection. (b) The inspection period specified in IWE-2412(a) (b) When additional flaws or areas of degradation may be decreased or extended by as much as 1 year that exceed the acceptance standards of Table IWE-to enable an inspection to coincide with a plant outage, 3410-1 are revealed, all of the. remaining examinations within the limitations of IWA-2430(d). within the same category shall: be performed to the ex-tent specified in Table IWE-2500-1 for the inspection interval. I IWE-2420 SUCCESSIVE INSPECTIONS (a) The sequence of component examinations estab- IVE-2500 EXAMINATION AND PRESSURE lished .during the first inspection interval shall be re-TEST REQUIREMENTS peated during each successive inspection interval, to the extent practical. (a) The method of examination for the components, (b) When component examination results require parts, and items (e.g., seals, gaskets, and bolts) of the evaluation of flaws, areas of degradation, or repairs in pressure retaining boundaries shall comply with those 218 i
IWE-2500 REQUIREMENTS FOR CLASS MC COMPONENTS INVE-2600 (1) Surface areas accessible from both sides shall Examination Surfhce A -8 be. visually examined using a VT-I visual examination method. (2) Surface areas accessible from one side only-- 112 in. 1/2 in. shall be examined for wall thinning using an ultrasonic thickness measurement method in accordance with Sec-A B tion V, T-544. (3) When ultrasonic thickness measurements are performed, one foot square grids shall be used. The number and location of the grids shall be determined C D by the Owner. (4) Ultrasonic measurements shall be used to de-termine the minimum wall thickness within each grid. The location of the, minimum wall thickness shall be marked such that periodic reexamination of that loca-tion can be performed in accordance with the require-Hmrina t ion urac ments of Table IWE-2500-1, Examination Category E-C. Surface Areas A - B and C - D
- FIG. IWE-2500-1 DISSIMILAR METAL WELDS IWE-2600 CONDITION OF SURFACE TO BE EXAMINED (a) When a containment vessel or liner is painted or tabulated in Table lWE-2500- 1, except- where alternate coated to protect surfaces from corrosion, preservice examination methods are used that meet the require- and inservice visual examinations shall be performed ments of IWA-2240. without the removal of the paint or coating.
(b) When paint or coatings are to be removed,, the (b) When removal of paint or coating is required, it paint or coatings shall be visually examined- in.accor- shall be removed in a manner that will not reduce the dance with Table IWE-2500-1 prior to removal. base metal or weld thickness below the design thick-(c) Examination methods for surface areas for aug- ness. Reapplied paint and coating systems shall be mented examination in IWE-1242 shall comply with compatible with the existing system, and shall be ex-
- the following criteria. amined in accordance with IWE-2200(g).
219
Fig. IWE-2500-2 1992 SECTION XI - DIVISION I I Examination area A-B Pressure retaining metal containment shell or liner External concrete-to-metal interface moisture barrier A Examination ar C-D I
*.Intera c; interfac a moisture barrier U
_ _ _Embedded shell or liner I I FIG. IWE-2500-2 EXAMINATION AREAS FOR MOISTURE BARRIERS I 220 I
m m - - - - m - - - TABLE IWE-2500-1 (CONT'E') EXAMINATION CATEGORIES I EXAMINATION CATEGORY E-A, CONTAINMENT SURFACES I. Extent and. Frequency of Examination Item Parts 1st No.. Examined Inspection Successive Interval Inspection Intervy E1.10 Containment Vessel Pressure Retaining Boundary
)
E1.11 Accessible Surface Areas 2,.1, General Visual7 0"'- 100% 100% Prior to each 10 Prior to each Type A test' Type A test' E1,12 Accessible Surface Areas7.4 .' Visual, VT-3 100% 100% cr)
'W~Eiid6f Interifai --En1~dTecrlviia)Pý E1.20 Vent System 4 Visual, VT-3 100% 100%
0 Accessible Surface. Areas', .' End of interval End of Interval 0 7. NOTES:. ~.1 (1) Examination may be made from either the Inside or outside surface. (2) Examination shall Include structures that are parts of reinforcing structure, such as stiffening rings, manhole frames, around openings. and reinforcement (3) Not Including surface areas that are submerged or Insulated. (4) Including the wetted surfaces of submerged areas and the portions of Insulated surface areas that are necessary of IW-1231(a)(4). to meet the requirements (5) Examination shall Include the attac ent welds between structural attachments and the pressure retaining structure, except.for nonstructural and temporary attachments boundary or reinforcing as defined In NE-4435 and minor permanent attachments CC-4543.4. Examination shall Include the weld metal as defined In and the base metal for 1/2In. beyond the edge of the weld. (6) Includes flow channeling devices within containment vessels. (7) Refer to IWE-3510.1 for General Visual examination 1n1,Refer to IWE-5220 for test requirements. method requirements. (9) Deferral of Inspection Is not permissible In the 4th and successive inspection Intervals.
5, TABLE IWE-2500-1 (CONT'D) EXAMINATION CATEGORIES lJLE II EXAMINATION CATEGORY E-B, PRESSURE RETAINING WELDS r Extent and Frequency of Examination Examination 1st Item Parts Requlrements/ Examination No. Acceptance Inspection Successive/ Examined Fig. No. Method
.. :- . Standard Interval Inspectlon In(erva 4
E3.10 Containment Penetration Welds3.5 I Visual, VT-1 IWE-3511 25% of the total 25% d- the total E3.11 Longitudinal number of welds' 1 .,1fiumber of weld, E3.12 Circumferential E3.13 Flued Head and Bellows Seal Circumferential Welds Joined to the Penetration E3.20 Flange Welds (Category Cl6 zz Visual, VT-I 25% of the total 25% of the total 1 number of welds1 .2 number of welds oz
~iE3.30 Nozzle-to-Shell Welds (Category D)l 25% of the total 25% of the total number of welds 12 number of welds 1'-
It NOTES:
- , , , , *'...,
I ,, I
- z (ll Examination shall Ihclude theweld metAl and the base metal for 1/1In. beyond the edge of the weld.
(2) Welds shall be randomly selec~d' hroughout the containment and representative of the type of welds described by each (3) Examination shall Includ"eifs made In accordance with Item number. Section Ill, Class MC, Including those Class MC welds shown and NE-1132-I. . in Figs. NE-1120-1 (4) Different welds stiall e selected for examination each inspection Interval. (5) Includes onlytI(se welds subject to cyclic loads and thermal stress during normal plant operation. (6) Welded .qIldi categories are as defined In NE-3351 for Class MC and CC-3840 for Class CC. (7) fefe.r I of Inspection Isnot permissible In the 4th and successive inspection Intervals. L ... - . m -....-....... ...
- - -H -l - mH m _ - m m - -
TABLE IWE-2500-1 (CONT'D) EXAMINATION CATEGORIES EXAMINATION CATEGORY E-C, CONTAINMENT SURFACES REQUIRING AUGMENTED EXAMINATION Extent and Frequency of Examination Item Examination 1st Parts Requirements/ Examination Deferral of No. Examined Acceptance Inspection Successive Inspection to Fig. No. Method Standard Interval Inspection Intervals End of Interval3 E4.10 Containment Surface Areas E4.11 Visible Surfaces Visual, VT-1 IWE-3512.1 100% of Surface 100% of Surface Not Permissible IWE-3512.2 Areas Identified Areas Identified 2 by IWE-12421 by IWE-1242 E4.12 Surface Area Grid, Volumetric IWE-3512.3 100% of Minimum 100% of Minimum Minimum Wall Thickness Location Not Permissible Wall Thickness Wall Thickness
;0 Locations during Locations during each Inspection each Inspection Period, established Period, established in accordance In accordance I,-)
with with [WE-2500(c)(3) 2 IWE-2500(c)(3)2 and and C,) 2 2 IWE-2500(c)(4) IWE-2500(c)(4) U-) 0
- e NOTES:.
(1) Containment surface areas requiring augmented examination are those identified In IWE-1240. (2) The extent of examination shall be 100% for each inspection period until the areas examined remain essentially unchanged for three consecutive inspection periods. Such areas no longeri require augmented examination In accordance with IWE-2420(c). (3) Deferral of inspection is not permissible In the 4th and successive Inspection Intervals.
*J-*,"*.. *~~..",........,.* ._.,...... .*.. ',. [;**.* ., '.*
TABLE IWE-2500-1 (CONT'D) EXAMINATION CATEGORY E-D, SEALS, GASKETS, AND MOISTURE BARRIERS Extent and Frequency of Examination Examination 1st Deferral of Item Parts Requirements/ Examination Acceptance Inspection Successive Inspection to No. Examined' Fig. No. Method Standard Interval Inspection Intervals End of Interval5 E5.1 Seals' Visual, VT-3 IWE-3513 100% of each Item 100% of each item Not permissible. E5.20 Gaskets, Visual, VT-3 IWE-3513 100% of each item 100% of each item Not permissible E5.30 Moisture Barrlers 2,3,4 IWE-2500-2 Visual, VT-3 IWE-3513 100% of each item 100% of each item Not permissible 4)
'0 z
NOTE: (1) Examination shall include seals and gaskets on airlocks, hatches, and other devices that are required to assure containment leak-tight integrity. (2) Examination shall include internal and external containment moisture barrier.materials at concrete-to-metal interfaces intended to prevent
- intrusion of moisture against the pressure retaining metal containment shell or liner.
(3) Containment moisture barrier materials include caulking, flashing, and other sealants used for this application. (4) Examination shall include all accessible surfaces of Internal and external containment moisture barriers. (5) Deferral of inspection is not permissible in the 4th and successive inspection intervals.
- Im m - m - - - m m - - n m
M M =- M M M- .M m m m - M TABLE IWE-2500-1 (CONT'D) EXAMINATION CATEGORIES EXAMINATION CATEGORY E-F, PRESSURE RETAINING DISSIMILAR METAL WELDS Extent and Frequency of Examination Examination 1st Deferral of Item Parts Requirements/ Examination Acceptance Inspection Successive No. Examined3, 5 Inspection to Fig. No. Method Standard Interval Inspection Intervals4 End of Intervalb E7,10 Dissimilar Metal Welds IWE-2500-1 Surface IWE-3514 50% of the total 50% of the total Permissible 22 12 number of welds , number of welds , U,' r-T CIO C. _.rr NOTES: (I) Examination shall include the weld metal and the base metal for 1/2in. beyond the edge of the weld, (2) Welds shall be randomly selected throughout tlhe containment and representative of the type of welds described by each Item number. (3) Includes dissimillar metal welds between the following combinations: (a) carbon or low alloy steels to high alloy steels (b) carbon or low alloy steels to high nickel alloys (c) high alloy steels to high nickel alloys (4) Different welds shall be selected for examination each inspection interval. (5) Includes only those welds subject to cyclic loads and thermal stress during normal plant operation. (6) Deferral of inspection is not permissible In the 4th and successive inspection Intervals.
TABLE IWE-2500-1 (CONT'D) -3 EXAMINATION CATEGORIES EXAMINATION CATEGORY E-G, PRESSURE RETAINING BOLTING. Extent and Frequency of Examination Item Examination 1st Parts Requirements/ Examination Deferral of No. Acceptance Inspection Successive Examined Fig. No. Inspection to Method Standard Interval Inspection Intervals E8.10 Bolted Connections ' End of Interval' Surfaces Visual, VT-1 IWE-3515 100% of each bolted 100% of each bolted Permissible2 2 4 2 connection . connection ,4 E8.20 Bolted Connections Bolt torque or tension IWE-3515 100% of bolts 100% of bolts Permissible tests
'0 '0 z
NOTES: (1) Examination shall include bolts, studs, nuts, bushings, washers, and threads in base material and flange ligaments between threaded holes. stud (2) Examination of bushings, threads, and ligaments in base material of flanges Is required only when the connection is disassembled. (3) Examination shall not be deferred when the connection is disassembled or when thebolting is removed. (4MAll visible surfaces shall be examined. Bolting may remain in place under tension when disassembly Is not otherwise required. (5) Bolt torque or tension test Is required only for bolted connections that have not been disassembled and reassembled during the Inspection Interval. (6) Deferral of Inspection is not permissible In the 4th and successive Inspection intervals. - ~ - - - m - m - m - - m -
m mm* - ra m - - - - - - TABLE IWE-2500-1 EXAMINATIONCATEGORIES EXAMINATION CATEGORY E-P, ALL PRESSURE RETAINING.COMPONENTS Extent and Frequency of Examination Examination/ 1st Item Parts Test Deferral of Examination Acceptance Inspection Successive No. Examined Requirements Inspection to Method Standard Interval. Inspection Intervals End of Interval Containment Vessel E9.10 Pressure Retaining Boundary 2 System leakage 10 CFR 50,. 10 CFR. 50, Each repair, modilfl- Each repair, modifi- Not permissible' test Appendix J App. J cation, or replace- cation, or replace-ment ment E9.20 Con*talnrnent Penetration Bellows 10 CFR 50, 10 CFR 50, 10 CFR 50, 10 CFR 50, 10 CFR 50, Not permissible' Appendix J Appendix J App. J Appendix J. Appendix .J (Type B test) E9.30 Airlocks 10 CFR 50, 10 CFR 50,. 10 CFR 50, 10 CFR 50, 10 CFR 50, Not permissible' I'.) Appendix J Appendix. J App. J Appendix J l.a . Appendix J
-J (Type B test)
E9.40 Seals and Gaskets 10 CFR 50, 0 1.0 CFR 50, 10-CFR 50, 10 CFR 50, 10 CFR 50, Not permissible Appendix J Appendix J App. J Appendix J Appendix J. (Type B test) 0 NOTES: (1) Leakage tests may be deferred until the next scheduled leakage test, If allowed by IWE-5222. (2) If leak chase channels are utilized, they.shall be unplugged or tested in accordance with 10 CFR 50, Appendix J, Type Btest.
I I I
.ARTICLE IWE-3000 I
ACCEPTANCE STANDARDS U IWE-3100 EVALUATION OF IWE-3115 Review by Authorities U NONDESTRUCTIVE (a) The repair program and the examination results rWE-3110 EXAMINATION RESULTS PRESERVICE EXAMINATIONS shall be subject to review by the enforcement author-ities having jurisdiction *at the plant site. -I IWE-3111 General The preservice examination required by IWE-2200 (b) Evaluation of examination results may be subject to review by the regulatory authority having jurisdiction at the plant site. 1 and performed in accordance with the procedures of IWA-2200 shall be evaluated by the acceptance stan- IWE-3120 INSERVICE NONDESTRUCTIVE dards specified in Table IWE-3410-1. Acceptance.of. components for service shall be in accordance with IWE-3112, IWE-3114, and IWE-3115.
. EXAMINATIONS I 1VWE-3121 General IWE-3112 Acceptance Inservice nondestructive examination results shall be compared with recorded results of the preservice ex- 'I (a) Components whose examination either confirms the absence of or reveals flaws or areas of degradation amination and prior inservice exanuinations. Accep-tance of the components for continued service shall be in accordance with IWE-3122, IWE-3124, and IWE-I that do not exceed the acceptance standards of Table IWE-3410-1 shall be acceptable for service, provided the flaws or areas of degradation are recorded in ac-cordance with the requirements of IWA-1400(h) and 3125.
IWE-3122 Acceptance I IWA-6220 in terms of location, size, shape, orienta-tion, and distribution within the component. (b) Components whose examination reveals flaws or IWE-3122.1 Acceptance by Examination. Com-ponents whose examination results meet the acceptance standards listed in Table IWE-2500-1 shall be accept-I areas of degradation that do not meet the acceptance standards of Table IWE-3410-1 shall be unacceptable able for continued service. Verified changes of flaws for service unless such flaws or areas of degradation or areas of degradation from prior examinations shall are removed or repaired, 'to the extent necessary to meet the acceptance standards, prior to placement of the component in service. be recorded in accordance with IWA-1400(h) and IWA-6220. Components. that do not meet the accep-tance standards of IWE-3000 shall be corrected in ac-I cordance with the provisions shown in IWE-3122.2" IWE-3114 Repairs and Reexaminations IWE-3122.3, or IWE-3122.4. 1iWE-3122.2 Acceptance by Repair. Components I Repairs and reexarrdations shall comply with the whose examination results reveal flaws or areas of deg-requirements of IWA-4000. Reexamination shall be conducted in accordance with the requirements of radation that do not meet the acceptance standards list-ed in Table IWE-2500-1 shall be unacceptable for con-I IWA-2200; the recorded results shall demonstrate that tinued service until the additional examination the repair meets the acceptance standards. specified in Table IWE-3410-1. requirements of IWE-2430 are satisfied, and the flaw or area of degradation is either removed by mechanical I 228
IWE-3122,2 REQUIREMENTS FOR CLASS MC COMPONENTS MTr-3510.1 methods or the component repaired to the.extent.nec- lowing verification of the suspect areas by the supple-essary to meet. the acceptance standards of IWE-3000. mental examination as required by IWE-3200, the re-quirements of IWE-3120 are satisfied. IWE-3122.3 Acceptance by Repla*cement. As an alternative to the repair requirement of IWE-3122.2, the component or the' portion of the component con-taining the flaw or area of degradation shall be replaced IWE-3200 SUPPLEMENTAL in accordance with IWE-7000. EXAMINATIONS INWE-3122.4 Acceptance by Evaluation Examinations that detect flaws or evidence of deg-(a) Components whose examination results reveal radation that require evaluation in accordance with the flaws or areas of degradation that do not meet the ac- requirements of..RVE-3100 may be supplemented by ceptance standards listed in Table IWE-3410-1 shall be other examination methods and techniques (IWA-2240) acceptable for service without the removal or repair of to determine the character of the flaw (i.e.. size, shape, the flaw or area of degradation or. replacement if an and orientation) or degradation. Visual examinations engineeiring evaluation indicates that the flaw or area that detect surface flaws or areas that are suspect shall of degradation is nonstructural in nature or has no ef- be supplemented by either surface or volumetric ex-fect on the structural integrity of the containment. amination.. When supplemental examinations of IWE-3200 are re-quired, if either the thickness of the base metal is re-duced by no more than 10% of the nominal plate thick- [WE-3400 STANDARDS ness or the reduced thickness can be shown by analysis to.satisfy the requirements of the Design Specifications, -WE-3410 ACCEPTANCE STANDARDS the ýcomponent shall be acceptable by evaluation.. The acceptance standards of Table IWE-3410-.- shall (b) When flaws .or areas of degradation are accepted be applied to evaluate the acceptability of the com-by efigineering-evaluation,. the area containing the flaw ponent for service following the preservice examination or degradation shall be reexamined, in accordance with and each inservice examination. IWEr2420(b) and (c). (c) When. portions of later editions of the Construc-tion Code or Section III are used, all .related portions IWVE-3430 ACCEPTABILITY shall be met. The engineering evaluation shall be. sub-ject to review by the enforcement and regulatory au- Flaws or areas of degradation that do not exceed, the thorities having jurisdiction at the plant site. allowable acceptance standards of IWE-3500 for the respective examination category shall be acceptable. rWE-3124 Repairs and Reexaminations Repairs and reexaminations shall comply with the IWE-3500 ACCEPTANCE STANDARDS requirements of rWA-4000. Reexaminations shall be conducted in accordance with the requirements of IWE-3510, STANDARDS FOR EXAMINATION IWA-2200 and the recorded results shall demonstrate CATEGORY E-A, CONTAINMENT that. the repair meets the acceptance standards of Table SURFACES IWE-3410-i. IWE-3510.1 Visual Examinations - General (a) The General Visual Examination shall be per-IWE-3125 Review. by Authorities formed by, or under the direction of, a Registered The repair pro-gram and the reexamination results Professional Engineer or other individual, knowledge-shall be subject to review by the. enforcement author- able in the requirements for design, inservice inspec-ities. having jurisdiction, at the plant site. tion, and testing of Class MC and metallic liners of Class CC components. The examination shall be per-. formed either directly or remotely, by an examiner with IWE-3130 LNSERVICE VISUAL visual acuity sufficient to detect evidence of degrada-EXAM/NATIONS tion that may affect either the containment structural Components, whose visual examination as specified integrity or leak tightness. "IinTable P -2500-1 reveals areas that. are suspect, (b) Prior to proceeding with a Type A test, condi-shall be unacceptable for continued service unless, fol- tions that may affect containment structural integrity or 229
,I IWE-3510.1 1992 SECTION XI - DIVISION I IWE-3512.2 I
TABLE IWE-3410-1 ACCEPTANCE STANDARDS I Examination Category E-A Component and Part Examined . Containment surfaces. Acceptance Standard IWE-3510 I
&-B Pressure retaining welds iWE-3511 E-C E-D . Containment surfaces requiring augmented.
examination Seals, gaskets, and moisture barriers . IWE-3512 MWE=3513 I E-F Pressure -etaining dissimil& metal welds IWE-3514 E-G E-P . Pressure retaining bolting All pressure retaining components IWE-3515 10 CFR 50, Appendix J U leak tightness shall be accepted by engineering eval- in accordance with IWE-3200 shall be performed when
-I uation or corrected by repair or replacement in accor-dance with IWE-3122.
specified as a result of the engineering evaluation: IWE-3511.2 VT-I Visual Examinations on Non-I coated Areas. The inspected area shall be examined IWE-3510.2 VT-3 Visual Examinations on Coated Areas. The inspected area, when painted or coated, shall be examined for evidence of flaking,, blistering, for evidence of cracking, discoloration, wear, pitting, excessive corrosion, arc strikes, gouges, surface dis-I peeling, discoloration, and other signs of distress. continuities, dents, and other signs of surface irregu-Areas that are suspect shall be accepted by engineering evaluation or corrected by repair or replacement in ac-cordance with IWE-3122. Supplemental examinations larities. Areas that are suspect shall be accepted by engineering evaluation or corrected by repair. or re-placement in accordance with IWE-3122. Supplemental I in accordance with IWE-3200 shall be performed when examinations in accordance, with JWE-3200 shall be specified as a result of the engineering evaluation. IWE-3510.3 VT-3 Visual Examinations on Non-performed when specified as a result of the engineering evaluation. I coated Areas. The inspected area shall be examined for evidence of cracking, discoloration, wear, pitting, excessive corrosion, arc strikes,. gouges, surface dis-IWE-3512 Standards for Examination Category E-C, Containment Surfaces Requiring Augmented Examination I continuities, dents, and other signs of surface irregu-larities. Areas that are suspect shall, be accepted by engineering evaluation or corrected by repair or re-
.placement in accordance with .IWE-3122. Supplemental IW&-3512.1 VT-1 Visual Examinations on Coated Areas. The inspected area, when painted or coated, shall be examined for evidence of flaking, blistering, U
examinations in'accordance with IWE-3200 shall be performed wheni specified as a result of the engineering evaluation. peeling, discoloration, and other signs of distress. Areas that are suspect shall be accepted by engineering evaluation or corrected by repair or replacement in ac-I cordance with IWE-3122. Supplemental examinations IWE-3511 Standards for Examination Category E-B, Pressure Retaining Welds in accordance with IWE-3200 shall be performed when specified as a result of the engineering evaluation. I IWE-3512.2 NVT-1 Visual Examinations on Non-IWE-3511.1 VT-1 Visual Examinations on Coated Areas. The inspected area, when painted or coated, shall be. examined for evidence of flaking, blistering. coated Areas. The inspected area shall be examined for evidence of cracking, discoloration, wear, pitting, excessive corrosion, arc strikes, gouges, surface dis-I peeling, discoloration, and other signs of. distress. continuities, dents, and other. signs of surface irregu-Areas that are suspect shall be accepted by engineering evaluation or corrected by repair or replacement in ac-. larities. Areas that are suspect shall be accepted by engineering evaluation or corrected by repair or re-I cordance with IWE-3122. Supplemental examinations placement in accordance with IWE-3122. Supplemental 230 I
IMT-3512.2 REQUIREMEN'TS FOR CLASS MC COMPONENTS PWE-3515.2 examinations in accordance with IWE-3200 shall be defects that may violate the leak-tight integrity. De-performed when specified as a result of the engineering fective items shall be repaired or replaced. evaluation. IWE-3514 Standards for Examination Category " IWE-3512.3 Ultrasonic Examination. Containment E-F, Pressure Retaining Dissimilar vessel examinations that reveal material loss exceeding or,.ma- Metal Welds 10% of the nominal containment wall thickness,. terial loss that is projected to exceed.10% of the nom- IWE-3514.1 Surface Examinations. The accep-inal containment wall thickness prior-to the. next" ex- tanc*estandards of IWB-3514 shall apply within the ex-amination, shall be documented. Such areas shall be amination boundary of Fig. IWE-2500-1. accepted by engineering evaluation or corrected by re-pair or replacement in accordance with FWE-3122. IWE-3515 Standards for Examination Category Supplemental examinations in accordance with IWE- E-G, Pressure Retaining Bolting 3200 shall be performed when specified as a result of IWE-3515.1 Visual Examinations. Bolting mate-the engineering evaluation. rials shall be examined in accordance with the material specification for defects which may cause the bolted connection to violate either the leak-tight or structural IWE-3513 Standards for Examination Category integrity. Defective items shall be replaced. E-D, Seals, Gaskets, and Moisture Barriers IWE-3515.2 Bolt Torque or Bolt Tension. Either bolt torque or bolt tension shall be within the limits IWE-3513.1 VT-3 Visual Examinations. Seals, specified for the original design. If no limits have been gaskets, and moisture barriers shall be examined for specified, acceptable bolt torque or bolt tension limits wear, damage, erosion, tear, surface cracks, or other shall be determined and utilized. 231
I I
' I I
ARTICLE IWE-4000 REPAIR PROCEDURES 3 IWE4100 SCOPE The rules of TWA-4000 apply. 23I U I I I I 232 1 I
ARTICLE IWE-5000 SYSTEM PRESSURE TESTS IWE-5200 SYSTEM TEST REQUIREMENTS IWE-5222 Deferral of Leakage Tests IWE-5210 GENERAL Leakage tests for the following minor repairs or modifications to .the -pressure retaining boundary may. Except as noted in IWE-5240, the requirements of be deferred until the next scheduled leakage test, pro-IWA-5000 are not applicable to Class MC or Class CC vided nondestructive, examination is performed in ac-components. cordance with the approved repair program: (a) welds of attachments to the surface of the pres-IWE-5220 TESTS FOLLOWING REPAIR, sure retaining boundary; MODIFICATION, OR (b) repair cavities, the depth of which does not pen-REPLACEMENT etrate the required design wall bi more than 10%; and IWE-5221 Leakage Test (c) welds attaching penetrations that are NPS I or Except as noted in IWE-5222, repairs or modifica- smaller. tions to the pressure retaining boundary or replacement of Class MC or Class CC components shall be sub-jected to a pneumatic leakage test in accordance with the provisions of-Title 10, Part 50 of the Code of Fed- IWE-5240 VISUAL EXAMINATION eral Regulations, Appendix J, Paragraph IV.A, which The requirements of lWA-5246- for visual exami-states: nations are applicable.
"Any major modification, replacement of a component which is part of the primary reactor containment boundary, or. resealing a seal-welded door, performed after the preoperational leakage rate test shall be fol-IWVE-5250 CORRECTIV"E MEASURES lowed by either a Type A,. Type B, or Type C test, as. applicable for the area affected by the modification. If the leakage test requirements of IWE-5221 cannot The measured leakage from this test shall be included be satisfied, the source of leakage shall be located and in the report to the Commission, required by V.A. The the area shall be examined to the extent necessary to.
acceptance criteria of II.Aý5.(b), III.B.3., or Il.C.3. establish the requirements for corrective action. Repairs as appropriate, shall be met. Minor modifications, re- shall be performed in accordance with the rules of placements, or resealing of seal-welded doors, per- IWE-4000 and leakage testing shall be reperformed. as formed -directly prior to the conduct of a scheduled required by IWE-5220, prior to returning the compo- .Type A test do not require a separate test." nent to service.. 233
I I ( I ARTICLE IWE-7000 REPLACEMENTS IWE-7100 GENERAL REQUIREMENTS I The rules of IWA-4060 apply.
'II
( I I I I I I U 234 3 I
APPLICANT'S EXHIBIT 49 ) Tank Inspection, Repair, Alteration, and Reconstruction Refining Department API STANDARD 653 FIRST EDITION, JANUARY 1991. ? INCORPORATES SUPPLEMENT 1, JANUARY 1992 LIBRARY GPU NUCLEAR CORP. 1 UPPER POND ROAD PARSIPPANY, N.J. 07054 American Petroleum Institute !
I ) SECTION 4-INSPECTION I 4.1 General operations, the tank, and the characteristics of the prod-Periodic in-service inspection of tanks shall be performed by an Authorized Inspector as defined herein (see 4.10), uct stored. 4.3.1.2 The interval of such inspections shall be consis-I unless otherwise noted. 4.2 Inspection Frequency Considerations tent with conditions at the particular site, but shall not exceed one month. I 4.3.1.3 This routine in-service inspection shall include 4.2.1 Several factors must be considered to determine inspection intervals for storage tanks. These include (but are not limited to) the following: a visual inspection of the tank's exterior surface checking for: leaks; shell distortions; signs of settlement; corro-
*sion; and condition of the foundation, paint coatings, U
- a. The nature of the product stored.
- b. The results of visual maintenance checks.
- c. Corrosion allowances and corrosion rates.
insulation systems and appurtenances. 4.3.2 SCHEDULED INSPECTIONS I
- d. Corrosion prevention systems.
- e. Conditions at previous inspections.
- f. The methods and materials of construction and repair.
4.3.2.1 All tanks shall be given a formal visual external inspection by an inspector qualified in accordance with
- 4. 10. at least every 5 years or at the quarter corrosion-rate I
- g. The location of tanks, such as those in isolated or life of the shell, whichever is less. Tanks may be in high risk areas.
.h. The potential risk of air or water pollution.
- i. Leak detection systems.
operation during this inspection. 4.3.2.2 Insulated tanks need to have insulation removed U only to the extent necessary to determine the condition of
- j. Change in operating mode (for example: frequency of fill cycling, frequent grounding of floating roof support legs).
the exterior wall of the tank or the roof. 4.3.2.3 Where exterior tank bottom corrosion is con-I
- k. Jurisdictional requirements. trolled by a cathodic protection system, periodic surveys 4.2.2 The interval between inspections of a tank (both internal and external) should be determined by its service of the system shall be conducted in accordance with API RP 651. I history unless special reasons indicate that an earlier 4.3.2.4 Tank grounding system components such as inspection must be made. A history of the service of a given tank or a tank in similar service (preferably at the same site) should be available so that complete inspec-shunts or mechanical connections of cables shall be visually checked. Recommended practices dealing with the prevention of hydrocarbon ignition are covered by I
tions can be scheduled with a frequency commensurate API RP 2003. with the corrosion rate of the tank. On-stream, nonde-structive methods of inspection shall be .considered when 4.3.3 IN-SERVICE ULTRASONIC THICKNESS I establishing inspection frequencies. MEASUREMENTS OF THE SHELL 4.2.3 Jurisdictional regulations, in some cases, control the frequency and interval of the inspections. These 4.3.3.1 External, ultrasonic thickness measurements of the shell can be a means of determining a rate of uniform I regulations may include vapor loss requirements, seal general corrosion while the tank is in service, and can condition, leakage, proper diking, and repair procedures. Knowledge of such regulations is necessary to insure compliance with scheduling and inspection requirements. provide an indication of the integrity of the shell. The extent of such measurements shall be determined by the owner/operator. I 4.3 4.3.1 External Inspection ROUTINE IN-SERVICE INSPECTIONS 4.3.3.2 When used, the ultrasonic thickness, measure-ments shall be made at intervals not to exceed the I following: 4.3.1.1 The external condition of the tank shall be monitored by close visual inspection from the ground on a routine basis. This inspection may be done by owner/
- a. Five years after commissioning new tanks.
- b. At five year intervals for existing tanks where the U
operator personnel, and can be done by other than corrosion rate is not known. inspectors described in 4.10. Personnel performing this inspection should be knowledgable of the storage facility
- c. When the corrosion rate is known, the maximum interval shall. be the smaller of RCA12N years (where RCA I 4-1 I
4-2 API STANDARD 653 is the remaining corrosion allowance in mils and N is the the actual bottom thickness shall be determined by
)
shell corrosion rate in mils iper year) or 15 years. inspection(s).within the next 10 years of tank operation to establish corrosion rates. 4.3.3.3 Internal' inspection; of the tank shell, when the tank is out of service, can be substituted for a program of 4.4.3 ALTERNATIVE INTERNAL INSPECTION external ultrasonic thickness measurements (made on 'the INTERVAL shell while the tank is in service). For unique combinations of service, environment and construction, the owner/operator may establish the inter-4.4 Internal Inspection nal inspection interval using an alternative procedure. 4.4.1 GENERAL This alternative procedure shall include method for determining bottom plate thickness, consideration of Internal inspection is primarily required to: environmental risk, consideration of quality of inspec-
- a. Ensure that the bottom is not severely corroded and tion and analysis of corrosion measurements. This alter-leaking. native procedure shall be documented andmade part of
- b. Gather the data necessary for the minimum bottom the permanent record of the tank.
and shell thickness assessments detailed in Section 2. As. applicable, these data shall also take into account external 4.5 Alternative to Internal Inspection. to ultrasonic thickness measurements made during in-service Determine Bottom Thickness inspections (see 4.3.3).
- c. Identify and evaluate any tank bottom settlement. -In cases where construction, size or other aspects allow external access to the tank bottom to determine 4.4.2 INSPECTION INTERVALS bottom thickness,. an external inspection in lieu of an internal inspection is. allowed to meet the data require-4.4.2.1 Intervals between internal inspections shall be ments of Table 4-1. However, in these cases, consider-.
determined by the corrosion rates measured during previ-. ation of other maintenance items may dictate internal ous inspections or anticipated based on experience with tanks in similar service, Normally, bottom corrosion rates inspection intervals. This alternative approach shall be. j) documented and made part of the permanent record of will control and the inspection interval will be governed the tank. by the measured or anticipated corrosion rates and the calculations for minimum required thickness of tank bottoms (see 2.4.7). The actual inspection interval shall 4.6 Preparatory Work for Internal be set to ensure that the bottom plate minimum thick- Inspection nessesat the next inspection are not less than the values Specific work procedures shall be prepared and fol-listed in Table 4-1. In no case, however, shall the internal lowed when conducting inspections that will assure inspection interval exceed 20 years. personnel safety and health and prevent property damage 4.4.2.2 When corrosion rates are not known and similar in the workplace (see 1.4). service experience is not available to determine the bottom plate minimum thickness at the next inspection, 4.7 Inspection Checklists Appendix C provides sample checklists of items for consideration when conducting in-service and out-of-Table 4-1 -Bottom Plate Minimum Thickness selvice inspections (see Tables C-I and C-2). Minimum Bottom Plate Thickness (see 2.4.7) at 4.8 Records Next Inspection Tank Bottom/Foundafion (inches) Design 4.8.1 GENERAL 0.10 Tank bottom/foundation design Inspection records form the basis of a scheduled with no means for detection and inspection/maintenance program. (It is recognized that containment of a bottom leak records may not exist for older tanks and judgements 0:05 Tank bottom/foundation design must be based on experience with tanks in similar with means to provide detection services.) The owner/operator shall maintain a complete 0.05 and containment of a bottom leak Applied tank bottom reinforced record file consisting of three types of records, namely: ) lining, > 0.05 inch thick, in construction records, inspection history, and repair/ accordance with API RP 652. alteration history.
I TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION I 4-3
)\
4.8.2 -CONSTRUCTION RECORDS thickness measurements, conditions found, repairs, any settlement measurements, and recommendations. I Construction records may include nameplate informa-tion, drawings, specifications, construction completion report and any-results-of material tests and analyses. 4.10 Inspector Qualifications 4.1.0.1 Qualified inspectors shall have education and I experience equal to at least one of the following: 4.8.3 INSPECTION HISTORY The inspection history includes all measurements taken, a. A degree in engineering plus 1 year of experience in inspection of tanks, pressure vessels or piping. I the condition of all parts inspected, and a record of all
- b. A 2-year certificate in engineering or technology examinations and tests. A complete description of any unusual conditions with recommendations for correction or details which caused the conditions shall also be from a technical college, and 2 years of experience in construction, repair, operation or inspection, of which one year must be in inspection of tanks, pressure vessels I
included. This file will also contain corrosion rate and inspection interval calculations. or piping.
- c. The equivalent of a high school education, and 3 years of experience in construction, repair, operation or I
4.8.4 REPAIR/ALTERATION HISTORY inspection, of which one year must be in inspection of The repair/alteration history. includes all data accumu-lated on a tank from the time of its construction with tanks, pressure vessels or piping.
- d. Five years of experience in the inspection of above-ground storage tanks in the petroleum or chemical I
regard to repairs, alterations, replacements, and service industries. changes (recorded with service conditions such as stored product temperature and pressure). These records should include the results of any experiences with coatings and 4.10.2 An owner/operator of tanks may designate tank inspectors qualified in accordance with 4. 10. 1. Such I inspectors shall have the necessary authority and organi- ) linings. 4.9 Reports zational freedom to perform their duties. Authorized Inspectors shall be certified by an agency as provided in I this standard, in accordance with Appendix D. This 4.9.1 Reports recommending repairs shall include rea-sons for the repairs, and sketches showing location and extent. requirement will become effective eighteen (18) months after the date of issuance of the requirement. I 4.10.3 Qualification requirements for personnel perform-4.9.2 General inspection reports shall include metal ing nondestructive examinations are identified in 10.1.1.2. I U I I I I I I
RECURRING TASK WORK ORDER ** ********** ** ** NUMBER : R2091019 ACT ** ** ** ** **** .** PRIORITY : 5 ** ********** ** ** ** STATUS : HISTRY 17OCT06 ** ********** ** ** NBR OF ACTS: 01 ** ** ** ** LAST UPDATE: 17OCT06 APPLICANT'SEXHIBIT50 ** ** ** ** PRINT DATE : 10SEP07 ** ** ** W/O DESC INSPECT POLY BOTTLES FOR PRESENCE OF'WATER IN PAGE: 03 AR NUMBER A2148837 RESPONSIBLE ORG 0 P0 APPROVED BY RITCHIE AR TYPE/SUBTYPE R.T ACT RESP FOREMAN : "SSV5 OC OPS SHIFT SUPV MuC C MAINT UNIT FEG : OC 1 187 000 ATTACHMENTS: N M/U COMPONENT ID : OC 1 187 F MISC 187 MAINT UNIT DESCR : DRYWELL AND TORUS (SEE NR01 & TORUS VESSEL) EQUIP REQD MODES : A QA CLASS Y
- _____
0 PROCEDURE NUMBER EQ COMPONENT UPDATE N SAFE S/D :
- ASME SECTION XI : Y BOM/PART UPDATE N POST MAINT TEST : N MOD NUMBER REPEAT/ PEP NBR N _
NEXT DUE DATE 31OCT06 TASK FREQUENCY : 0091 TECH SPEC DATE 22NOV06 UNIT : D ACCOUNTING DATA BUSINESS UNIT : 10105 PROJECT: CUSTOMER: SUB ACCT: 517010 PRODUCT: DEPARTMENT: 05310 OPERATING UNIT: 83
==COMMENTS - SPECIAL PROCESS /EOUIPMENT/SAFETY=-========= --------------
ALSO NOTE IN CREM IF WATER IS. NOT PRESENT IN BOTTLE INSPECTED 25AUG06
RECURRING TASK WORK ORDER ******** ** ** NUMBER R2091019 ACT ** ** ** ** ** .. PRIORITY 5 ** ******** ** * ** STATUS HISTRY 17OCT06 ** .***.*k*** *. *. NBR OF ACTS: 01 ** ** ** LAST'UPDATE: 17OCT06 ** ** **
- U PRINT DATE : 10SEP07 **** **
W/O DESC INSPECT POLY BOTTLES FOR PRESENCE OF WATER IN PAGE: 04
-----------------------------WORK ORD ER COMPONENTS===============
I COMPONENT ID OC 1 187 DRYWELL AND TORUS F MISC (SEE NRO0 187
& TORUS VESSEL) I CHEM/RAD MAP LOCATION : MULTI 000 ASME SECTION XI: Y I QA CLASS =================-==========COMPLETION VERIFICATION========
EQ : Y
--------
1 PKG ASSMBLED : OTHER RESP FOREMAN : BUSK, THOMAS J REPEAT REQD : I SSV VERIF : N ASME - ISI BY: N COMPLETE DATE: 26AUG06
= ============-============HISTORY -- VERIFICATION= --------
COMPNT UPDATE : N BLIP NBR BOX: 0000 BILL OF MATLS : N FILE LOCATION: REPEAT REQD : A/R NBR : COMPLETED BY : BUSK, THOMAS J COMPLETE DATE: 26AUG06 CLOSED BY GUERRAZZI, GINAMARIE HISTORY DATE : 17OCT06 CAUSE CODE : CN REPAIR CODE : NF
============================COMPLETION REMARKS=--------------------------------
REPEAT MAINT: N PEP NBR: WORK PERFORMED: NO WATER OBSERVED IN ANY OF THE BOTTLES 26AUG06 I m
RECURRING TASK ACTIVITY ** ** **
** **** ****
I W/O NBR R2091019 01 ** ** ** ** **** .** IW/O A2148837 ** ** ** ** ** A/R NBR STATUS HISTRY 170CT06 ** ** ** ACT STATUS HISTRY 170CT06 ** ** ** ** TYPE ACT ** ** **
** ** **
PAGE: 01
----------------------------------- DESCRI PTI ON---------------------------
W/O DESCRIPTION : INSPECT POLY BOTTLES FOR PRESENCE OF WATER IN ACT DESCRIPTION : INSPECT POLY BOTTLES IN TORUS ROOM PERFORMING ORG : OPO RECURRING TASK NBR: PM18705M PRI: 5 COMPONENT ID : OC 1 187 F MISC 187 EQUIPMENT LOCATION: MULTI 030 CLR NUMBER : _ QA CLASS:_Q EQ: Y WO RESP ORG : OPO. FEG OC 1 187 000 DATE/SHIFT : 26AUG06 X POREMAN : OC OPS SHIFT SUPV CHARGING WORK CENTER: 05310 SSV AUTH : TJB4 DATE : 25AUG06 ORG-INSP/HOLD ACT TYPE : C SUPPORT DATES: N/A N/A PREPARED BY : RITCHIE DATE 25MAY06 HOLDS ! MODE N PARTS N CHEM + RAD CLR PLAN SCH
------------ =======SAFETY/PLANT IMPACT CONSIDERATIONS=========================
BARRIER PERMIT RQD: N CHEMICAL HAZARD : N CSP REQ : N FIRE PROTECTION : N SECURITY : N FSI REQ : N HAZARD BARRIER : N /
..............-- - EM .AND RAD DATA ========================---------
SYSTEM BREACH N INSULATION REQUIRED: N HWP REQ N SCAFFOLDING REQD : N PECH SPEC: N MULTIPLE WORK LOC MAP NBR: HP REQD N- NO HP ASSISTANCE REOUITRED
.................... ar ...... -------------------------- SCHEDULING DATA----------------------
PREMIS ID :_ SCHED ID/WIN : 0645 187 START DATE : 07NOV06 EST DUR (HRS) : 3 POST MAINT TEST: CLEARANCE REQD : N DUE DATE : 31OCT06 TECH SPEC: 22NOV06 DOSE ESTIMATE : 0002 mR
........- INITIAL REVIEWS===================================
ASME/ISI REVIEW :BUSK ASME XI R&R: DATE: 25AUG06 QC PLAN REVIEW :BARAN NQCR - DATE: 25AUG06 APPROVED BY -BUSK DATE: PRINT NAME AND WRITE INITIALS OF ALL PERSONNEL WHO INITIALED THIS ACTIVITY
RECURRING TASK ACTIVITY ********** ** ** W/O NBR : R2091019 01 ** ** ** ** **** ** A/R NBR : A2148837 ** ********** ** ** .4 W/O STATUS : HISTRY 170CT06 * * ** ** ACT STATUS : HISTRY 170CT06 ** ** ** ** TYPE : ACT ** *. **
.****
PAGE: 02
-ACTIVITY PROCEDURE LIST:
HP SPECIAL INSTRUCTIONS 4 RWP OC-1-06-00052 OPS AND CHEMISTRY
* '1T5T* RWP TS NOT VALID FOR VHPAA.DW OR CB/SJTAE RM AT POWER
- KNOWLEDGE OF THE RADIOLOGICAL CONDITIONS IS REQUIRED PRIOR TO ENTERING THE RCA UNLESS ESCORTED BY AN RP TECH.
- A DOCUMENTED HRA RP BRIEF IS REQUIRED FOR ALL ENTRIES INTO AREAS POSTED AS "LOCKED HIGH RADIATION AREA", AND "HIGH RADIATION AREA".(REF RP-AA-460)
- PC REQUIREMENTS PER RADIOLOGICAL POSTINGS OR PER RP.
- CHEMISTRY TECHNICIANS REQUIRE A DOSE RATE METER FOR ALL SYSTEM SAMPLING I EXCEPT "CLEAN" SYSTEMS,UNLESS AN AM-2 IS IN SAMPLING AREA. SAMPLES 2MR/HR OR GREATER REQUIRE RP FOR SURVEYING AND LABELING PRIOR TO TRANSPORTING.
- OPERATORS SHALL NOTIFY RP BEFORE PERFORMING ANY ACTIVITES THAT IN CHANGING AREA DOSE RATES. EXAMPLES INCLUDE DRAINING SYSTEM OR COMPONENT THAT CONTAINS RADIOACTIVITY (TANKS, FILTERS, PIPING, ETC.)
I I
--- II I
RECURRING TASK ACTIVITY :::::*:**: * *: - MW/O NBR. A/R.NBR : R2091019 A2148837 01
** **** *******.** ** ***** ** **
W/O STATUS HISTRY 170CT06 ** *,**,***, **.
- I ACT STATUS TYPE
- HISTRY ACT 170CT06 ** **
** ** ** * **
B -ACTIVITY FOLLOWER DESCRIPTION PAGE: 03 I STEP NBR DESCRIPTION INITIAL/DATE. COMPLT INSP
- 1. PURPOSE:
A. THE PURPOSE OF THIS ACTIVITY IS INSPECT THE POLY BOTTLES IN THE TORUS ROOM FOR THE PRESENCE OF WATER.
- 2. CLEARANCE REQUIREMENTS:
A. NONE
- 3. OPS IMPACT STATEMENT:
A. NONE.
- 4. PRECAUTIONS A. USE EXTREME CAUTION WHEN WORKING ON OR NEAR ROTATING EQUIPMENT. REFERENCE THE MID-ATLANTIC ROG SAFETY AND HEALTH GUIDE AND PROCEDURE EN-OC7301 FOR CAUTIONS AND PRECAUTIONS ASSOCIATED WITH THIS WORK.
B. BE SURE A PRE-JOB BRIEF IS PERFORMED AND ALL CAUTIONS AND PRECAUTIONS ASSOCIATED WITH THIS ACTIVITY ARE PROPERLY ADDRESSED AND ANY AND ALL CONCERNS AND QUESTIONS
RECURRING TASK ACTIVITY ** ********** ** **
*** ********** **** **.**
W/O NBR R2091019 01 ** ** ** ** ** ** .A/R NBR A2148837 ** ********** ** ** ** ,W/O STATUS : HISTRY 170CT06 ** ** ** ACT STATUS : HISTRY 170CT06 ** ** ** ** TYPE ACT ** ** **
*** . **
PAGE: 04 ACTIVITY FOLLOWER DESCRIPTION STEP DESCRIPTION INITIAL/DATE NBR COMPLT INSP HAVE BEEN RESOLVED BEFORE STARTING WORK.
- 5. SUPPORT INFORMATION A. NONE
- 6. JOB SCOPE A.INSPECTION OF POLY BOTTLES INSIDE THE TORUS ROOM. THERE ARE 5 POLY BOTTLES LOCATED AROUND THE OUTER PERIMETER OF THE TORUS.
THE INSPECTION SHALL INCLUDE CHECKING FOR THE PRESENCE OF WATER IN THE BOTTLES. DOCUMENT IN THE CREM IF WATER IS PRESENT, AND IF SO, WHAT IS THE LEVEL IN THE BOTTLE AND THE LOCATION OF THE BOTTLE (BY BAY NUMBER). B. IF BOTTLE IS OVER 3/4 FULL, NOTE LEVEL AND DUMP BOTTLE INTO NEAREST FLOOR DRAIN. El i
ffiffARFAmmam Ram I
** ** **
RECURRING TASK ACTIVITY IW/O
**** **** ** ** **** **
NBR : R2091019 01 * *. **
** ** ** **
A/R NBR : A2148837 I W/O STATUS : HISTRY 170CT06 **
** ** ** ** **
ACT STATUS : HISTRY 170CT06
** ** **
TYPE : ACT
** ** ** ======== ==== ==== ==== ====
SUMMARY
COMMENTS:== = = = = = = = = = =PAGE:
= = =05=
CAUSE CODE: REPAIR CODE: ADDITIONAL PAGES ATTACHED ? ETT REMOVED ?
------------ MEASUREMENT AND TEST EQUIPMENT-ID NUMBER DATE USED DESCRIPTION ADDITIONAL PAGES ATTACHED ? ---------------------------- FINAL REVIEWS---------------------------
MAINT DATE : QC DATE : OTHER DATE :
1 RECURRING TASK ACTIVITY ** ********** ** ** W/O NBR : R2091019 01 ** ** ** ** **** ** A/R NBR : A2148837 ** ********** ** ** ** W/O STATUS HISTRY 170CT06 ** ********** ** ** ACT STATUS': HISTRY 17OCT06 ** ** ** TYPE : ACT ** ** **
******* -** ** **
MEASUREMENT AND TEST EQQIPMENT ACTIVITY ID NUMBER DATE USED DESCRIPTION 01 NONE N/A F)D
&*
RECURRING TASK ACTIVITY ** ****** ** ** W/O NBR R2091019 01 A/R NBR A2148837 * ** ** ** W/O STATUS : HISTRY 170CT06 ** ********* ** ** ACT STATUS : HISTRY 170CT06 * ** * ** TYPE ACT ** ,* **
** ** *
- PAGE: 07 I
III Rl
RECURRING TASK WORK ORDER ** ***** 44*****.*****4 **
**** *****4 NUMBER : R2091083 ACT ** ** ** ** **** *.
PRIORITY : 5 ** .****** ** .4 ** STATUS : HISTRY 29NOV06 ** *.*...**.* ** ** NBR OF ACTS: 01 E. 51 *A LAST UPDATE: 29NOV06 APPLCANTSEXHIBIT51 ** ** ** ** PRINT DATE : 10SEP07 ** ** ** 5 W/O DESC INSPECT POLY BOTTLES FOR PRESENCE OF WATER IN PAGE: 03 AR NUMBER A2148940 RESPONSIBLE ORG :0 PO APPROVED BY RITCHIE AR TYPE/SUBTYPE RT ACT RESP FOREMAN SSV5 OC OPS SHIFT SUPV MUC : C MAINT UNIT FEG OC 1 187 000 ATTACHMENTS: N M/U COMPONENT ID OC 1 187 F MISC 187 MAINT UNIT DESCR DRYWELL AND TORUS (SEE NR01 & TORUS VESSEL)
.EQUIP REQD MODES A QA CLASS PROCEDURE NUMBER EQ Y _
COMPONENT UPDATE N SAFE S/D :
- ASME SECTION XI : Y BOM/PART UPDATE N POST MAINT TEST : N MOD NUMBER REPEAT/ PEP NBR : N NEXT DUE DATE 25NOV06 TASK FREQUENCY : 0091 TECH SPEC DATE 17DEC06 UNIT :D ACCOUNTING DATA --
BUSINESS UNIT. : 10105 PROJECT: CUSTOMER: _ SUB ACCT: 517010 PRODUCT: DEPARTMENT: 05310 OPERATING UNIT: 83
RECURRING TASK WORK ORDER **
.**.***** * * **. ** **** .***
- I NUMBER PRIORITY
R2091083 5 ACT **
** ** ***** * ** ** ** **** ** ** **
U STATUS : HISTRY 29NOV06 ** ******** ** ** NBR OF ACTS: LAST UPDATE: iPRINT DATE : 01 29NOV06 10SEP07
** ** ** ** ** ** ** ** ** ** **
I
- W/O DESC INSPECT POLY BOTTLES FOR PRESENCE OF WATER IN PAGE: 04
------------------------ ORKORD ER COMPONENTS======---------------------- I COMPONENT ID OC 1 187 DRYWELL AND TORUS F MISC 187 (SEE NR01 & TORUS VESSEL) I CHEM/RAD MAP LOCATION : MULTI 000 ASME SECTION XI: Y I QA CLASS EQ : Y I = -= C O MPL E T I O N V E R I F I C A T I O N------ ------ ----- ------ ----- = = = -= = = = = =- = = = = = = == =- = = =-
PKG ASSMBLED : HGTO TRITT, HERBERT G OTHER RESP FOREMAN : TRITT, HERBERT G REPEAT REQD : I SSV VERIF N I ASME - ISI BY: N COMPLETE DATE: 25NOV06
------------------------------- HISTORY VERIFICATION==--
COMPNT UPDATE BILL OF MATLS
- N
- N BLIP NBR FILE LOCATION:
BOX:
-------..........
0000 I REPEAT REQD COMPLETED BY CLOSED BY
- TRITT, HERBERT G
- GUERRAZZI, GINAMARIE A/R NBR COMPLETE DATE: 25NOV06 HISTORY DATE : 29NOV06
I CAUSE CODE : CN
- REPAIR CODE : PM
---------
REPEAT MAINT: WORK PERFORMED:
-------------------- COMPLETION REMARKS=== ---------------
N PEP NBR: I A01---ALL POLY BOTTLES WERE FOUND WITH NO WATER IN THEM 25NOV06 I I I I I I
!
m
RECURRING TASK ACTIVITY ** ********** ** ** W/O NBR R2091083 01 ** ** ** ** **** ** A/R NBR : A2148940 ** ********** ** ** ** W/O STATUS : HISTRY 29NOV06 ** ********** ** ** I ACT STATUS : HISTRY 29NOV06 ** **
** ** ** ** **
TYPE ACT S*** ** ** ** PAGE: 01
.IPTION----------------------
W/O DESCRIPTION : INSPECT POLY BOTTLES FOR PRESENCE OF WATER IN ACT DESCRIPTION : INSPECT POLY BOTTLES IN TORUS ROOM PERFORMING ORG : OPO RECURRING TASK NBR: PM18705M PRI: .5 COMPONENT ID : OC 1 187 F MISC 187 EQUIPMENT LOCATION: MULTI 000 CLR NUMBER : _ QA CLASS:__ EQ: Y WO RESP ORG : OPO FEG : OC 1 187 .000 DATE/SHIFT : 25NOV06 X FOREMAN : OC OPS SHIFT SUPV CHARGING WORK CENTER: 05310 SSV AUTH : CRWI DATE 13NOV06 ORG-INSP/HOLD ACT TYPE : C SUPPORT DATES: N/A N/A PREPARED BY : RITCHIE DATE 25MAY06 HOLDS : MODE N PARTS N CHEM + RAD CLR PLAN SCH
------------------------SAFETY/PLANT IMPACT CONSIDERATIONS==-======================
BARRIER PERMIT RQD: N CHEMICAL HAZARD : N CSP REQ : N FIRE PROTECTION : N SECURITY : N FSI REQ : N HAZARD BARRIER : N /
- CHEMAND RAD DATA-SYSTEM BREACH LN INSULATION REQUIRED: N HWP REQ :N_ SCAFFOLDING REQD : N CECH SPEC: N MULTIPLE WORK LOC "" MAP NBR:
HP REQD NO HP AqSqTTANCE REQUTRED
----------------------------SCHEDULING DATA-PREMIS ID : 0646 187 SCHED ID/WIN : 0646 187 START DATE : 25NOV06 EST DUR (HRS) : 3 POST MAINT TEST:
CLEARANCE REQD : N DUE DATE : 25NOV06 TECH SPEC: 17DEC06 DOSE ESTIMATE : 0002 mR
------------------------- INITITAL REVIEWS----------------------
ASME/ISI REVIEW .: RITCHIE ASME XI R&R: DATE: 060CT06 QC PLAN REVIEW : BARAN N0CR _ DATE: 24JUL06 APPROVED BY : RITCHIE,J DATE: PRINT NAME AND WRITE INITIALS OF ALL PERSONNEL WHO INITIALED THIS ACTIVITY
U RECURRING TASK ACTIVITY ** ********** ** **
************* **** ****
W/O NBR R2091083 01 ** ** ** ** **** ** A/R NBR A2148940 ** ********** ** ** **
- W/O STATUS : HISTRY 29NOV06 ** ********** ** **
ACT STATUS : HISTRY 29NOV06 ** ** ** ** TYPE ACT ** ** **
**** ** ** **
PAGE: 02
==========-========-======ACTIVITY PROCEDURE LIST HP SPECIAL INSTRUCTIONS 4 RWP OC-1-06-00052 OPS AND CHEMISTRY " THIS RWP IS NOT VALID FOR VHRADW OR CB/SJAE RM AT POWER.
- KNOWLEDGE OF THE RADIOLOGICAL CONDITIONS IS REQUIRED PRIOR TO ENTERING THE RCA UNLESS ESCORTED BY AN RP TECH.
b pi
- A DOCUMENTED HRA RP BRIEF IS REQUIRED FOR ALL ENTRIES INTO AREAS POSTED AS "LOCKED HIGH RADIATION AREA", AND "HIGH RADIATION AREA". (REF RP-AA-460)
- PC REQUIREMENTS PER RADIOLOGICAL POSTINGS OR PER RP.
- CHEMISTRY TECHNICIANS REQUIRE A DOSE RATE METER FOR ALL SYSTEM SAMPLING, EXCEPT "CLEAN" SYSTEMS,UNLESS AN AM-2 IS IN SAMPLING AREA. SAMPLES 2MR/HR OR GREATER REQUIRE RP FOR SURVEYING AND LABELING PRIOR TO TRANSPORTING.
- OPERATORS SHALL NOTIFY RP BEFORE PERFORMING ANY ACTIVITES THAT COULD RESULT TAT rp aNT1\- AREA DOSE RATE*S YAMPTLES TITTLT flATMTMr qVqMPM DP rrMDnmpTjTrp THAT CONTAINS RADIOACTIVITY (TANKS, FILTERS, PIPING, ETC.)
I . RECURRING TASK ACTIVITY ** *.******** ** ** I W/O NBR R2091083 01 ** ** ** ** A/R NBR : A2148940 ** ********** ** ** ** W/O STATUS : HISTRY 29NOV06 ** ********** ** ** I ACT STATUS : HISTRY 29NOV06 ** ** ** ** TYPE ACT ** ** ** PAGE: 03 ACTIVITY FOLLOWER DESCRIPTION STEP DESCRIPTION INITIAL/DATE NBR COMPLT INSP
- 1. PURPOSE:
A. THE PURPOSE OF THIS ACTIVITY IS INSPECT THE POLY BOTTLES IN THE TORUS ROOM FOR THE PRESENCE OF WATER.
- 2. CLEARANCE REQUIREMENTS:
A. NONE
- 3. OPS IMPACT STATEMENT:
A. NONE.
- 4. PRECAUTIONS A. USE EXTREME CAUTION WHEN WORKING ON OR NEAR ROTATING EQUIPMENT. REFERENCE THE
.MID-ATLANTIC ROG SAFETY.AND HEALTH GUIDE AND PROCEDURE EN-OC-301 FOR CAUTIONS AND PRECAUTIONS ASSOCIATED WITH THIS WORK.
B. BE SURE A PRE-JOB BRIEF IS PERFORMED AND ALL CAUTIONS AND PRECAUTIONS ASSOCIATED WITH THIS ACTIVITY ARE PROPERLY ADDRESSED AND ANY AND ALL CONCERNS AND QUESTIONS
RECURRING TASK ACTIVITY ** ********* ** ** W/O NBR R2091083 01 ** ** ** ** **** ** A/R NBR A2148940 ** ********** ** ** ** ,W/O STATUS : HISTRY 29NOV06 ** ******** ** ** I:ACT STATUS : HISTRY 29NOV06 ** ** ** ** TYPE ACT ** ** **
**
- lilt
-------------- ACTIVITY FOLLOWER DESCRIPTION STEP DESCRIPTION INITIAL/DATE NBR COMPLT INSP HAVE BEEN RESOLVED BEFORE STARTING WORK.
- 5. SUPPORT INFORMATION A. NONE
- 6. JOB SCOPE A.INSPECTION OF POLY BOTTLES INSIDE THE TORUS ROOM. THERE ARE 5 POLY BOTTLES LOCATED AROUND THE OUTER PERIMETER OF THE TORUS.
THE INSPECTION SHALL INCLUDE CHECKING FOR THE PRESENCE OF WATER IN THE BOTTLES. DOCUMENT IN THE CREM IF WATER IS PRESENT, AND IF SO, WHAT IS THE LEVEL IN THE BOTTLE AND THE LOCATION OF THE BOTTLE (BY BAY NUMBER). B. IF BOTTLE IS OVER 3/4 FULL, NOTE LEVEL AND DUMP BOTTLE INTO NEAREST FLOOR DRAIN. I 2=-I I
RECURRING TASK ACTIVITY *::::::::* ** ** I W/O NBR : R2091083 01 ** ** ** ** *** ** A/R NBR : A2148940 ** ********** ** ** ** W/O STATUS : HISTRY 29NOV06 ** ******** ** ** I ACTSTATUS
,TYPE
- HISTRY 29NOV06 ** ** ** **
ACT ** ** ** PAGE: 05
------ ----------------------- ----------=
SUMMARY
COMMENTS:================ I CAUSE CODE: - REPAIR CODE: ADDITIONAL PAGES ATTACHED ? ETT REMOVED ? U---------MEASUREMENT AND TEST EQUIPMENT====----------------------- I D NUMBER DATE USED DESCRIPTION ADDITIONAL PAGES ATTACHED ?
£------------........FINAL REVIEWS--------------------------
MAINT DATE : QC DATE : OTHER DATE :
RECURRING TASK WORK ORDER ** * ** **
*********** ***** ****
NUMBER R2095404 ACT .4 ** *. * **** ** PRIORITY : 5 ** ******** ** ** ** STATUS : HISTRY 20FEB07 .**.*** ** ** NBR OF ACTS: 01. *. ** **
- LAST UPDATE: 20FEB07 APPLICANT'S EXHIBIT 52 ** ** ** *4 PRINT DATE : 10SEP07 .* ** **
W/O DESC INSPECT POLY BOTTLES FOR PRESENCE OF WATER IN PAGE :l0 AR NUMBER A2155763 RESPONSIBLE ORG 0 Po APPROVED BY RITCHIE AR TYPE/SUBTYPE T ACT RESP FOREMAN SSV5 OC OPS SHIFT SUPV MUC C MAINT UNIT FEG OC 1 187 000 ATTACHMENTS: N M/U COMPONENT ID OC 1 187 F MISC 187 MAINT UNIT DESCR DRYWELL AND TORUS (SEE NROI & TORUS VESSEL) EQUIP REQD MODES : A QA CLASS PROCEDURE NUMBER EQ Y _ COMPONENT UPDATE N SAFE S/D :
- ASME SECTION XI : Y BOM/PART UPDATE N ,POST MAINT TEST : N MOD NUMBER REPEAT/ PEP NBR : N NEXT DUE DATE 24FEB07 TASK FREQUENCY : 0091 TECH SPEC DATE 18MAR07 UNIT : D ACCOUNTING DATA BUSINESS UNIT : 10105 PROJECT:
CUSTOMER: SUB ACCT: 517010 PRODUCT: DEPARTMENT:. 05310 OPERATING UNIT: 83
RECURRING TASK WORK ORDER ******** .** ** -3 NUMBER PRIORITY STATUS
- R2095404
- _55*
- HISTRY ACT 20FEB07
** ** ** ** ********* ********** ** ,* ** ,* **** ** * **
I NBR OF ACTS: 01 ** ** ** U
**
.LAST UPDATE: 20FEB07 ** ,* ** ** PRINT DATE : 10SEP07 ** ** ** W/O DESC INSPECT POLY BOTTLES FOR PRESENCE OF WATER IN
----------------------------- WORK ORD ER COMPONENTS---------------------------------
PAGE: 04 I COMPONENT ID OC 1 DRYWELT, 187 F AND TORtlq MISC (REE F RO1 187 k TCRIIR VF5qF.T.) I CHEM/RAD MAP LOCATION : MULTI 000 ASME SECTION XI: Y
'I QA CLASS = -======-=-======-==========COMPLETION VERIFICATION==-
EQ : Y
====-----------------
S PKG ASSMBLED :_OTHER RESP FOREMAN : SISAK, JOSHUA V REPEAT REQD : U SSV VERIF ASME - ISI BY: N N COMPLETE DATE: 13FEB07 I
----------------------------- HISTORY VERIFICATION====--------------------------
COMPNT UPDATE : N BLIP NBR BOX: 0000 BILL OF MATLS : N FILE LOCATION: REPEAT REQD : A/R NBR : COMPLETED BY : SISAK, JOSHUA V COMPLETE DATE: 13FEB07 CLOSED BY : GUERRAZZI, GINAMARIE HISTORY DATE : 20FEB07 CAUSE CODE : CN REPAIR CODE : NF I
------------------------------- COMPLETION REMARKS=-...
REPEAT MAINT: N PEP NBR: WORK PERFORMED: A01 INSPECTED POLY BOTTLES FOR WATER. NO WATER PRESENT. JVS3 13FEB07 m_ I I I I I I i mI w
RECURRING TASK ACTIVITY ** ********* ** **
*** ********** **** ****
W/O NBR : R2095404 01 ** ** ** ** **** ** A/R NBR A2155763 ** ********** ** ** ** W/O STATUS : HISTRY 20FEB07 ** ** ** ACT STATUS : HISTRY 20FEB07 ** ** ** ** TYPE ACT ** ** ** RWP ACCESS CODE: OC-i-07-00052 PAGE: 01 DESCRIPTION W/O DESCRIPTION : INSPECT POLY BOTTLES FOR PRESENCE OF WATER IN ACT DESCRIPTION : INSPECT POLY BOTTLES IN TORUS ROOM PERFORMING ORG : OPO RECURRING TASK NBR: PM18705M PRI: 5 COMPONENT ID : OC 1 187 F MISC 187 EQUIPMENT LOCATION: MULTI 0___ _ CLR NUMBER : _ QA CLASS:_Q EQ: Y WO RESP ORG : OPO FEG : OC 1 187 000 DATE/SHIFT : 13FEB07 X FOREMAN : OC OPS SHIFT SUPV CHARGING WORK CENTER: 05310 SSV AUTH : PXG1 DATE 12FEB07 ORG-INSP/HOLD ACT TYPE : C SUPPORT DATES: N/A N/A PREPARED BY : RITCHIE DATE 25MAY06 HOLDS : MODE N PARTS N CHEM + RAD CLR PLAN SCH
SAFETY/PLANT IMPACT CONSIDERATIONS=.........................
BARRIER PERMIT RQD: N CHEMICAL HAZARD : N CSP REQ : N FIRE PROTECTION : N SECURITY : N FSI REQ : N HAZARD BARRIER : N /_ CHEM AND RAD DATA-------- SYSTEM BREACH : N INSULATION REQUIRED: N HWP REQ : N SCAFFOLDING REQD : N TECH SPEC: N MULTIPLE WORK LOC : MAP NBR:
- N NO HP ASSISTANCE REOUITRED HP REQD NO HP ASSISTANCE REQUIRED
----------------------------- SCHEDULING DATA=
PREMIS ID : 0707 187 SCHED ID/WIN : 0707 187 START DATE : 13FEB07 EST DUR (HRS) : 3 POST MAINT TEST: CLEARANCE REQD : N DUE DATE : 24FEB07 TECH SPEC: 18MAR07 DOSE ESTIMATE : 0002 mR INITIAL REVIEWS--========-------- ASME/ISI REVIEW :VOISH-NIS, G ASME XI R&R: DATE: 09FEB07 QC PLAN REVIEW :VOISHNIS, G NOCR DATE: 09FEB07 APPROVED BY :VOISHNIS, G DATE: PRINT NAME AND WRITE INITIALS OF ALL PERSONNEL WHO INITIALED THIS ACTIVITY
U RECURRING TASK ACTIVITY ** * ******** ** ** W/O NBR R2095404 01 ** * ** ** *** ** A/R NBR : A2155763 ** ********* ** ** ** W/O STATUS : HISTRY 20FEB07 ** ********* **
- ACT STATUS : HISTRY 20FEB07 ** ** **
- TYPE : ACT ** ** **
PAGE: 02
-ACTIVITY PROCEDURE LIST I
RAD PROTECTION REQUIREMENTS ALARMING DOSIMETER: Y I ED SETPOINT: 0032 MREM or 0300 MREM/HR HP COVERAGE: INTERMITTENT RWP ACCESS CODE: OC-1-07-00052 HP SPECIAL INSTRUCTIONS
- THIS RWP IS NOT VALID FOR VHRA,DW OR CB/SJAE RM AT POWER.
*OPERATIONS.
KNOWLEDGE OF RAD CONDITIONS REO'D PRIOR TO ENTRY TO RCA W/OUT RPT ESCORT.
- A DOCIJMENTED HRA RP BRIEF IS REOUIRED FOR ALL ENTRIES INTO AREAS POSTED AS "LOCKED HIGH RADIATION AREA", AND "HIGH RADIATION AREA".(REF RP-AA-460)
- PC REQUIREMENTS PER RADIOLOGICAL POSTINGS OR PER RP.
- OPERATORS SHALL NOTIFY RP BEFORE PERFORMING ANY ACTIVITES THAT COULD RESULT IN CHANGING AREA DOSE RATES. EXAMPLES INCLUDE DRAINING SYSTEM OR COMPONENT THAT CONTAINS RADIOACTIVITY (TANKS, FILTERS, PIPING, ETC.)
OPEX:
- CLEARANCE AND TAGGING ACTIVITIES-FAILURE TO ADHERE TO OR INADEOUATE TAGOUT INSTRUCTIONS HAVE CONTRIBUTED TO LOSSES IN GENERATION AND HAZARDOUS WORKING m l
C0NDTIOTTNR_0F#S:0E20012.0E20535.0E19214 I U P I EL I
RECURRING TASK ACTIVITY ** ** **
** * * **** ****
I W/O NBR : R2095404 01 **
** ** ** ** ** **** ** ** **
A/R NBR : A2155763 I W/O STATUS : HISTRY 20FEB07 **
** ** ** ** ** **
ACT STATUS HISTRY 20FEB07
** ** **
TYPE ACT
** ** **
PAGE: 03 ACTIVITY FOLLOWER DESCRIPTION I STEP NBR DESCRIPTION INITIAL/DATE COMPLT INSP NOTE: U WHEN THE PM IS PERFORMED IN WEEK 0707 CURRENTLY U! SCHEDULED FOR 2/13/2007, ENSURE TIM RAUSCH AND PETE TAMBURRO GO ALONG.
- 1. PURPOSE:
A. THE PURPOSE OF THIS ACTIVITY IS INSPECT THE POLY BOTTLES IN THE TORUS ROOM FOR THE PRESENCE OF WATER.
- 2. CLEARANCE REQUIREMENTS:
A. NONE
- 3. OPS IMPACT STATEMENT:
A. NONE.
- 4. PRECAUTIONS A. USE EXTREME CAUTION WHEN WORKING ON OR NEAR ROTATING EQUIPMENT. REFERENCE THE MID-ATLANTIC ROG SAFETY AND HEALTH GUIDE AND PROCEDURE EN-OC-301 FOR
m RECURRING TASK ACTIVITY ** ******** ** ** W/O NBR R2095404 01 ** ** ,* ** ***, ** A/R NBR A2155763 ** ********** ** **
- W/O STATUS : HISTRY 20FEB07 ** ******** **
ACT STATUS : HISTRY 20FEB07 ** ** ** ** TYPE : ACT ** ** **
****
w ** ** PAGE: 04
-- ACTIVITY FOLLOWER DESCRIPTION i-STEP DESCRIPTION INITIAL/DATE NBR COMPLT INSP CAUTIONS AND PRECAUTIONS ASSOCIATED WITH THIS WORK.
B. BE SURE A PRE-JOB BRIEF IS PERFORMED AND ALL CAUTIONS AND PRECAUTIONS ASSOCIATED WITH THIS ACTIVITY ARE PROPERLY ADDRESSED AND ANY AND ALL CONCERNS AND QUESTIONS HAVE BEEN RESOLVED BEFORE STARTING WORK.
- 5. SUPPORT INFORMATION A. NONE
- 6. JOB SCOPE A.INSPECTION OF POLY BOTTLES INSIDE THE TORUS ROOM. THERE ARE 5 POLY BOTTLES LOCATED AROUND THE OUTER PERIMETER OF THE TORUS.
THE INSPECTION SHALL INCLUDE CHECKING FOR THE PRESENCE OF WATER IN THE BOTTLES. DOCUMENT IN THE CREM IF WATER IS PRESENT, AND IF SO, WHAT IS THE LEVEL IN THE BOTTLE AND THE LOCATION OF THE BOTTLE (BY BAY NUMBER). U I I
RECURRING TASK ACTIVITY ** ********** ** **
.W/O NBR : R2095404 01 ** ** ** **** **
EW/O A/R NBR STATUS : ACT STATUS
- A2155763 HISTRY HISTRY 20FEB07 20FEB07
** ** ********** ********** ** ** ** ** ** ** ** **
TYPE : ACT ** ** **
* *** ** ** *.
i U. .. '** .[ .-. . : . , _ .. : PAGE: 05 ACTIVITY FOLLOWER DESCRIPTION STEP DESCRIPTION INITIAL/DATE NBR COMPLT INSP B. IF WATER IS FOUND IN ANY OF THE POLY BOTTLES.PERFORM THE FOLLOWING:
- INVESTIGATE AND FINDR THE SOURCE -REQUEST A CHEMISTRY SAMPLE. DO NOT EMPTY ANY BOTTLES UNTIL A SAMPLE HAS BEEN TAKEN. -ISSUE IR IDENTIFY BY BAY NUMBER WHICH BOTTLES HAVE WATER AND INDICATE THE LEVEL IN THE BOTTLE C. EMPTY BOTTLE AS DIRECTED BY ENGINEERING
a ,RECURRING TASK ACTIVITY * ***** ** 1q0NER R2095404 01* *** * ***
- A/R NBR : A2155763 * ***** * *
- W/O STATUS : HISTRY 20FEB07_* ***** **
ACT STATUS :HISTRY 20FEB07 * * ** .TYPE : ACT * ** PAGE: 06
==== == -- =======-===========-=
SUMMARY
-- COMMENTS:=======----------------------------
CAUSE CODE: - REPAIR CODE: ADDITIONAL PAGES ATTACHED ? ETT REMOVED ?
------------. ==MEASUREMENT AND TEST EQUIPMENT ID NUMBER DATE USED DESCRIPTION ADDITIONAL PAGES ATTACHED ? .. . . . . ..- F IN AL R EV I EW S = = = = = = = = = = = = = =
MAINT DATE : QC DATE : OTHER DATE : I.U w
RECURRING TASK ACTIVITY ** ** * * * * * ** ** Iw/o NBR A/R NBR R2095404 A2155763 01 **
** ** ** ** ** **** ** ** **
W/O STATUS HISTRY 20FEB07 ** **
.ACT STATUS HISTRY 20FEB07 ** ** **
TYPE ACT ** ** **
** ** **
PAGE: 07 MEASUREMENT AND TEST EQUIPMENT ACTIVITY ID NUMBER DATE USED DESCRIPTION I 01 NONE
I .RECURRING TASK ACTIVITY ** ******** ** *
************ .*. ****
W/O NBR : R2095404 01 ** ** * ** **** ** SA/R.NBR A2155763 ** ******** ** ** ** ,W/OSTATUS : HISTRY 20FEB07 ** ********** ** ** ACT:STATUS : HISTRY 20FEB07 ** ** ** ** TYPE ACT ** ** ** PAGE: 08 I I I _____________________________________El I I
RECURRING TASK WORK ORDER ** * ** ** NUMBER R2099351 ACT ** ** ** ** **** ** PRIORITY 5 ** ********** ** ** ** STATUS : HISTRY 22JUN07 ** ********** ** ** NBR OF ACTS: 01 ** ** ** ** LAST UPDATE: 22JUN07 APPLICANT'S EXHIBIT 53 ** ** ** ** PRINT DATE : 10SEP07 ** ** ** W/O DESC INSPECT POLY BOTTLES FOR PRESENCE OF WATER IN PAGE: 03 AR NUMBER A2161370 RESPONSIBLE ORG :0 Po APPROVED BY RITCHIE AR TYPE/SUBTYPE RT ACT RESP FOREMAN GJV0 VOISHNIS JR., GEORGE MUC : C MAINT UNIT FEG OC 1 187 000 ATTACHMENTS: N M/U COMPONENT ID OC 1 187 F MISC 187 MAINT UNIT DESCR DRYWELL AND TORUS (SEE NRO1 & TORUS VESSEL) m EQUIP REQD MODES : A QA CLASS Y ____ PROCEDURE NUMBER EQ Y COMPONENT UPDATE N SAFE S/D : ASME SECTION XI : BOM/PART UPDATE N POST MAINT TEST N MOD NUMBER REPEAT/ PEP NBR NEXT DUE DATE : 15MAY07 TASK FREQUENCY 0091 TECH SPEC DATE : 06JUN07 UNIT D. ACCOUNTING DATA BUSINESS UNIT : 10105 PROJECT: CUSTOMER: SUB ACCT: 517010 PRODUCT: DEPARTMENT: 05310 OPERATING UNIT: 83
RECURRING TASK WORK ORDER **
**,********** ********e ** **** ** **** -I NUMBER
,:PRIORITY STATUS
- 5
R2099351 HISTRY ACT 22JUN07
** ** ** ** ********** ********** ** ** ** ** **** ** ** ** **
I NBR OF ACTS: 01 ** e* ** LAST UPDATE: PRINT DATE : 22JUN07 10SEP07
** ** ** ** ** I W/O DESC INSPECT POLY BOTTLES FOR PRESENCE OF WATER TN ====WORK ----------------------------------- ORD ER COMPONENTS===============
PA-~. nA I COMPONENT ID OC 1 187 DRYWELL AND TORUS F MISC 187 (SEE NR01 & TORUS VESSEL) I CHEM/RAD MAP LOCATION : MULTI 000 ASME SECTION XI: Y I QA CLASS EQ : Y 1
----------------------------- COMPLETION VERIFICATION--------
PKG ASSMBLED JCR0 RUMBIN, JAMES C OTHER_ _ 13 RESP FOREMAN : RUMBIN, JAMES C REPEAT REQD : a SSV VERIF : N ASME -. ISI BY: N COMPLETE DATE: 22MAY07
----------------------------- HISTORY VERIFICATION==-----------------------------
COMPNT UPDATE : N BLIP NBR BOX: 0000 BILL OF MATLS : N FILE LOCATION: REPEAT REQD : A/R NBR : COMPLETED BY : RUMBIN, JAMES C COMPLETE DATE: 22MAY07 CLOSED BY : ROSANIO, CLAIRE M HISTORY DATE : 22JUN07 CAUSE CODE : CN REPAIR CODE : PM
----------------------------- COMPLETION REMARKS=- --------
REPEAT MAINT: N PEP NBR: WORK PERFORMED: NO WATER IN ANY OF THE 5 BOTTLES ----- JIM RUMBIN 22MAY07 I I I I I
-- m -mm
ACTIVITY ********** ** RECURRING TASKi ***** ********** **
**** ****
W/O NBR : R2099351 01 ** ** ** ** .**** ** A/R NBR : A2161370, ** * ** ** i W/O STATUS HISTRY 22JUN07 ** ******** ** **
**
ACT STATUS HISTRY 22JUN07 ** ** TYPE ACT ** ** **
**** ** **.*
RWP ACCESS CODE: OC-107-00052 PAGE: 01
---------------------------------- DESCRIPTION----------------------
W/O DESCRIPTION : INSPECT POLY BOTTLES FOR PRESENCE OF WATER IN ACT DESCRIPTION : INSPECT POLY BOTTLES IN TORUS ROOM PERFORMING ORG : OPO RECURRING TASK NBR: PM18705M PRI: 5 COMPONENT ID : OC 1 187 F MISC 187 EQUIPMENT LOCATION: MULTI 000_ CLR NUMBER _ _ QA CLASS:_Q EQ: Y WO RESP ORG : OPO FEG : OC 1 187 000 DATE/SHIFT : 22MAY07 X FOREMAN : OC OPS SHIFT SUPV CHARGING WORK CENTER: 05310 SSV AUTH : RFSO DATE : 21MAY07 ORG-INSP/HOLD ACT TYPE : C SUPPORT DATES: N/A N/A PREPARED BY : RITCHIE DATE : 25MAY06 HOLDS : MODE N PARTS N CHEM + RAD CLR PLAN SCH
------------ SAFETY/PLANT IMPACT CONSIDERATIONS===.........
BARRIER PERMIT RQD: N CHEMICAL HAZARD : N CSP REQ : N FIRE PROTECTION : N SECURITY : N FSI REQ : N HAZARD BARRIER : N /
---------- ========-=======CHEM AND RAD DATA SYSTEM BREACH : N INSULATION REQUIRED: N HWP REQ : N SCAFFOLDING REQD :_N TECH SPEC: N MULTIPLE WORK LOC : MAP NBR:
HP REQD : N NO
...
HP
...
ASSISTANCE REOITTRED
............. ... 11"...... ======================-=----SCHEDULING DATA PREMIS ID : 0721 187 SCHED ID/WIN : 0721 187 START DATE : 22MAY07 EST DUR (HRS) : .3 POST MAINT TEST:
CLEARANCE REQD : N DUE DATE : 15MAY07 TECH SPEC: 06JUN07 DOSE ESTIMATE : 0002 mR
---------------------------- INITIAL REVIEWS------------------------------
ASME/ISI REVIEW : VOISHNIS, G ASME XI R&R: DATE: 24APR07 QC PLAN REVIEW : VOISHNIS, G NOCR DATE: 24APR07 APPROVED BY : VOISHNIS. G DATE: PRINT NAME AND WRITE INITIALS OF ALL PERSONNEL WHO INITIALED THIS ACTIVITY
I RECURRING TASK ACTIVITY ** *******e* ** **
**** .********* **** ****
W/O NBR : R2099351 01 ** ** ** ** **** ** A/R NBR A2161370 ** ********** ** ** ** W/O STATUS : HISTRY 22JUN07 ** ********** ** ** ACT STATUS : HISTRY 22JUN07 ** ** ** ** TYPE ACT ** ** ** PAGE: 02
----=-=====================ACTIVITY PROCEDURE LIST RAD PROTECTION REQUIREMENTS ALARMING DOSIMETER: Y ED SETPOINT: 0032 MREM or 0300 MREM/HR HP COVERAGE: INTERMITTENT RWP ACCESS CODE: OC-1-07-00052 HP SPECIAL INSTRUCTIONS
- OPERATIONS.
- THIS RWP IS NOT VALID FOR VHRA,DW OR CB/SJAE RM AT POWER.
- KNOWLEDGE OF RAD CONDITIONS REO'D PRIOR TO ENTRY TO RCA W/OUT RPT ESCORT.
- A DOCUMENTED HRA RP BRIEF IS REQUIRED FOR ALL ENTRIES INTO AREAS POSTED AS "LOCKED HIGH RADIATION AREA", AND "HIGH RADIATION AREA".(REF RP-AA-460)
- PC REQUIREMENTS PER RADIOLOGICAL POSTINGS OR PER RP.
- OPERATORS SHALL NOTIFY RP BEFORE PERFORMING ANY ACTIVITES THAT COULD RESULT IN CHANGING AREA DOSE RATES. EXAMPLES INCLUDE DRAINING SYSTEM OR COMPONENT THAT CONTAINS RADIOACTIVITY (TANKS, FILTERS, PIPING, ETC.)
OPEX:N
- LEARANCR AND TAGGING:l ACTTVITTIE-FATT.URE TO AT)1ERE Tn oR TrNADEOUATP TAGOUiT INSTRUCTIONS HAVE CONTRIBUTED TO LOSSES IN GENERATION AND HAZARDOUS WORKING CONDITIONS.OE -S:OE20012,OE20535,OE19214. I I
w
RECURRING TASK ACTIVITY ** ** **
*.**.******* **** ****
W/O NBR R2099351 01 * *. ** ** **** ** A/R NBR A2161370 ** *****.*.** * ** ** W/O STATUS : HISTRY 22JUN07 *4 ******.*.* ** ** ACT STATUS : HISTRY 22JUN07 ** ** ** .* TYPE ACT ** ** **
**WW* * ** ** ~PAGE: 03 ACTIVITY FOLLOWER DESCRIPTION I STEP.
NBR.. DESCRIPTION .INITIAL/DATE COMPLT INSP I 1. PURPOSE: A. THE PURPOSE OF THIS ACTIVITY IS INSPECT I THE POLY BOTTLES IN THE TORUS ROOM FOR.THE I, PRESENCE OF WATER. I 2. CLEARANCE REQUIREMENTS: A. NONE
- 3. OPS IMPACT STATEMENT:
A. NONE.
- 4. PRECAUTIONS A. USE EXTREME CAUTION WHEN WORKING ON OR NEAR ROTATING EQUIPMENT. REFERENCE THE MID-ATLANTIC ROG SAFETY AND HEALTH GUIDE AND PROCEDURE EN-OC-301 FOR CAUTIONS AND PRECAUTIONS ASSOCIATED WITH THIS WORK.
B. BE SURE A PRE-JOB BRIEF IS PERFORMED AND ALL CAUTIONS AND PRECAUTIONS ASSOCIATED WITH THIS ACTIVITY ARE PROPERLY ADDRESSED AND ANY AND ALL CONCERNS AND QUESTIONS
I m RECURRING TASK ACTIVITY ** ********** ** ** W/O NBR : R2099351 01 ** ** ** ** **** *
.A/R NBR A2161370 ** ********** ** ** **
W/O STATUS : HISTRY 22JUN07 ** ********** ** **
-ACT STATUS : HISTRY 22JUN07 ** ** ** **
TYPE ACT ** ** ** PARE. f4 ACTIVITY FOLLOWER.DESCRIPTION STEP DESCRIPTION INITIAL/DATE 'NBR COMPLT INSP HAVE BEEN RESOLVED BEFORE STARTING WORK.
- 5. SUPPORT INFORMATION A. NONE
- 6. JOB SCOPE A.INSPECTION OF POLY BOTTLES INSIDE THE TORUS ROOM. THERE ARE 5 POLY BOTTLES LOCATED AROUND THE OUTER PERIMETER OF THE TORUS.
THE INSPECTION SHALL INCLUDE CHECKING FOR THE PRESENCE OF WATER IN THE BOTTLES. DOCUMENT IN THE CREM IF WATER IS PRESENT, AND IF SO, WHAT IS THE LEVEL IN THE BOTTLE AND THE LOCATION OF THE BOTTLE (BY BAY NUMBER). B. IF WATER IS FOUND IN ANY OF THE POLY BOTTLES,PERFORM THE FOLLOWING:
- INVESTIGATE AND FIND THE SOURCE. - REQUEST A CHEMISTRY SAMPLE. DO NOT EMPTY ANY BOTTLES UNTIL A SAMPLE HAS BEEN TAKEN.
___________- - I. w
RECURRING TASK ACTIVITY [W/O NBR : R2099351 01 ** ** A/R NBR A2161370 ** ********** ** * .
.W/O STATUS : HISTRY 22JUN07 ** *********, ** ,* .ACT STATUS : HISTRY 22JUN07 ** ,4 ** *, 'TYPE : ACT ** ** ** . . " ...... . . . .. *.*
PAGE: 05
--- ACTIVITY FOLLOWER DESCRIPTION STEP DESCRIPTION INITIAL/DATE NBR COMPLT INSP ISSUE IR IDENTIFY BY.BAY NUMBER WHICH BOTTLES HAVE WATER AND INDICATE THE LEVEL IN THE BOTTLE C. EMPTY BOTTLE AS DIRECTED BY ENGINEERING
i RECURRING TASK ACTIVITY ** ********* ** ** W/O NBR R2099351 01 ** ** ** ** **** ,* -A/R NBR A2161370 ,* ********** ** ** *, W/O STATUS : HISTRY 22JUN07 ** ******** *, ** ACT STATUS : HISTRY 22JUN07 ** ** * ** .TYPE ACT * * ** ,* PAGE: U0
SUMMARY
COMMENTS: CAUSE CODE: REPAIR CODE: ADDITIONAL PAGES ATTACHED ? ETT REMOVED ?
----------------------- MEASUREMENT AND TEST EQUIPMENT====---------------------
ID NUMBER DATE USED DESCRIPTION ADDITIONAL PAGES ATTACHED ?
---------------- FINAL REVIEWS---------------------
MAINT DATE : QC DATE : OTHER DATE : El
!I
RECURRING TASK ACTIVITY ** ********* **
- W/O NBR R2099351 01 .3 ,* ** * .*
- A/R NBR A2161370 ** ********,* ** ** **
W/O STATUS : HISTRY 22JUN07 ** *****.**** ** ** ACT STATUS : HISTRY 22JUN07 ** *. ** .* TYPE ACT .. * *
***, * ** ** .* i..,a* * .* ... .. ; .,
PAGE: 0U MEASUREMENT AND TEST EQUIPMENT ACTIVITY ID NUMBER DATE USED DESCRIPTION 01 NONE N/A
m RECURRING TASK ACTIVITY * * ** **
************** **** ****
.:W/O NBR : R2099351 01 ** ** ** ** **** ** A/R NBR A2161370 ** ********** ** ** ** W/O STATUS : HISTRY 22JUN07 ** **.****** * ** .ACT"STATUS : HISTRY 22JUN07 ** ** ** **
- TYPE : ACT ** *" **
e*e. ** ** ** PAGE: 08 I I I I I IU w
RECURRING TASK WORK ORDER ** ******. ** .* NUMBER : R2104033 ACT ** ** ** ** *** ** PRIORITY :5 ** *5**** ** ** ** ** STATUS : HISTRY 29AUG07 ******** ** ** NBR OF ACTS: 01 ** ** ** ** LAST UPDATE: 29AUG07 APPLICANT'S EXHI81T54 ** ** ** ** PRINT DATE : 10SEP07 ** ** ** BMW W/O DESC INSPECT POLY BOTTLES FOR PRESENCE OF WATER IN PAGE: 03 AR NUMBER A2168200 RESPONSIBLE ORG 0 Po APPROVED BY RITCHIE AR TYPE/SUBTYPE R'T ACT RESP FOREMAN SSV5 OC OPS SHIFT SUPV MUC C MAINT UNIT FEG OC 1 187 000 ATTACHMENTS: N M/U COMPONENT ID OC 1 187 F MISC 187 MAINT UNIT DESCR DRYWET.L AND TORUS (SEE NR01 & TORnmS VESSEI.T EQUIP REQD MODES : A QA CLASS PROCEDURE NUMBER EQ Y COMPONENT UPDATE N SAFE S/D : ASME SECTION XI : Y BOM/PART UPDATE N POST MAINT TEST : N MOD NUMBER REPEAT/ PEP NBR : N NEXT DUE DATE' 21AUG07 TASK FREQUENCY : 0091 TECH SPEC DATE 12SEP07 UNIT : D ACCOUNTING DATA BUSINESS UNIT : 10105. PROJECT: CUSTOMER: SUB ACCT: 517010 PRODUCT: DEPARTMENT: 05310 OPERATING UNIT: 83
RECURRING TASK WORK ORDER **
*** *****e*** ********** ** **** ** **** -I NUMBER PRIORITY STATUS
R2104033 5 HISTRY ACT 29AUG07
** ** ** ** ********** ********** ** ** ** ** **** ** ** ** **
I NBR OF ACTS: 01 ** ** ** LAST UPDATE: PRINT DATE : 29AUG07 10SEP07
** ** ** ** ** ** **
I W/0 DESC .. * .. . -- w--v INSPECT POLY BOTTLES FOR PRESENCE OF WATER IN PAGE:
----------------------------- WORK ORD ER COMPONENTS---------------------------------
04 I COMPONENT ID OC 1 187 F MISC 187 DRYWELL AND TORUS (SEE NR01 & TORUS VESSEL) I CHEM/RAD MAP LOCATION : MULTI 000 ASME SECTION XI: Y I QA CLASS EQ : Y
=======-==-====-============COMPLETION VERIFICATION---------------------------
U PKG ASSMBLED : OTHER_ _ IN_ RESP FOREMAN : SISAK, JOSHUA V REPEAT REQD : I SSV VERIF N ASME - ISI BY: N COMPLETE DATE: 28AUG07
---------------------------- HISTORY VERIFICATION=-------------------------------
COMPNT UPDATE : N BLIP NBR BOX: 0000 BILL OF MATLS : N FILE LOCATION: REPEAT REQD A/R NBR : COMPLETED BY : SISAK, JOSHUA V COMPLETE DATE: 28AUG07 CLOSED BY : STRAKA, GINAMARIE HISTORY DATE : 29AUG07 CAUSE CODE : CF REPAIR CODE : NF
----------------------------- COMPLETION REMARKS=--------------------------------
REPEAT MAINT: N PEP NBR: WORK PERFORMED: A01 TORUS INSPECTION COMPLETED SAT. NO WATER WAS NOTED IN 5 BOTTLES. 28AUG07 A01 TORUS INSPECTION COMPLETED SAT. NO WATER WAS NOTED IN 5 BOTTLES. 28AUG07 JVS 3 28AUG07 I I
RECURRING TASK ACTIVITY * *** *** **
- W/O NBR R2104033 01 ** ** ** ** ****
- A/R NBR A2168200 ** - ******** ** **
- W/O STATUS : HISTRY 29AUG07 * ******** ** **
.ACT STATUS : HISTRY 29AUG07 ** ** **
TYPE : ACT ** **
- RWP ACCESS CODE: OC-1-07-00052 PAGE: 01
------------------------------ DESCRI PTION=----------------------
I W/O DESCRIPTION :-INSPECT POLY BOTTLES FOR PRESENCE OF WATER IN
- INSPECT POLY BOTTLES IN TORUS ROOM ACT DESCRIPTION PERFORMING ORG : OPO RECURRING TASK NBR: PM18705M PRI: 5 I COMPONENT ID : OC 1 000 187 F MISC 187 EQUIPMENT LOCATION: MULTI CLR NUMBER : _ QA CLASS:_.__ EQ: Y IDATE/SHIFT WO RESP ORG FOREMAN OPO
- 28AUG07
- OC OPS SHIFT SUPV X
FEG CHARGING WORK CENTER:
- OC 1 187 05310 000 SSV AUTH DFRI DATE : 27AUG07 I ORG-INSP/HOLD __
ACT TYPE. C SUPPORT DATES: N/-A N/A PREPARED BY : RITCHIE DATE 25MAY06 HOLDS : MODE N PARTS N CHEM + RAD CLR PLAN SCH
------------- =====SAFETY/PLANT IMPACT CONSIDERATIONS==--=..........--:. -----
BARRIER PERMIT RQD: N CHEMICAL HAZARD :_N CSP REQ : N FIRE PROTECTION :_N SECURITY N FSI REQ : N HAZARD BARRIER :-N /
------------------ .CHEM AND RAD DATA SYSTEM BREACH INSULATION'REQUIRED: N HWP REQ SCAFFOLDING REQD : N TECH SPEC: N MULTIPLE WORK LOC MAP NBR:
HP REQD NO HP ASSISTANCE REOUIRED
-------------------------- SCHEDULING DATA----------------------
PREMIS ID : 0735 187 SCHED ID/WIN : 0735 187 START DATE : 28AUG07 EST DUR (HRS) : 3 POST MAINT TEST: CLEARANCE REQD : N DUE DATE : 21AUG07 TECH SPEC: 12SEP07 DOSE ESTIMATE : 0002 mR
......- INITIAL REVIEWS===================================
ASME/ISI REVIEW : N/A ASME XI R&R: DATE: 23MAY07 QC PLAN REVIEW : SULLIVAN, M. NQCR - DATE: 23MAY07 APPROVED BY : VOISHNIS, G DATE: PRINT NAME AND WRITE INITIALS OF ALL PERSONNEL WHO INITIALED THIS ACTIVITY
RECURRING TASK ACTIVITY ** ******** **
- W/O NBR R2104033 01 **** *****
A/R NBR A2168200 ** ******** *** *
- W/O STATUS : HISTRY 29AUG07 * ********* **
- ACT STATUS : HISTRY 29AUG07 * ** ** **
TYPE : ACT **
- PAGE: 02
====================.-ACTIVITY PROCEDURE LIST RAD PROTECTION REQUIREMENTS ALARMING DOSIMETER: Y ED SETPOINT: 0032 MREM or 0300 MREM/HR HP COVERAGE: INTERMITTENT RWP ACCESS CODE: OC-1-07-00052 --- HP SPECIAL INSTRUCTIONS
- OPERATIONS
- THIS RWP IS NOT VALID FOR VHRA.DW OR CB/SJAE RM AT POWER Im
- KNOWLEDGE OF RAD CONDITIONS REO'D PRIOR TO ENTRY TO RCA W/OUT RPT ESCORT. I
- A DOCUIMENTED HRA RP BRIEF IS REOUIRED FOR ALL E.NTRIES INTO AREAS POSTED AS ALL ENTRIES INTO AREAS POSTED AS
- A"LOCKED HIGH HRA DOCUMENTED RP BRIEF RADIATION AREA", AND "HIGHFOR IS REQUIRED RADIATION AREA". (REF RP-AA-460fl' Um "LOCKED HIGH RADIATION "HIGH RADIATION AREA"i AND POSTINGS AREA".(REF - RP-AA-460)- m
- PC REOUIREMENTS PER RADIOLOGICAL OR PER RP i I I
- OPERATORS SHALL NOTIFY RP BEFORE-PERFORMING ANY ACTIVITES THAT COULD RESULT IN CHANGING AREA DOSE RATES. EXAMPLES INCLUDE DRAINING SYSTEM OR COMPONENT L 1ý.
THAT CONTAINS RADIOACTIVITY (TANKS, FILTERS, PIPING, ETC.) Im OPEX: I
- CLEARANCE AND TAGGING ACTIVITIES-FAILURE TO ADHERE TO OR INADEQUATE TAGOUT INSTRUCTIONS HAVE CONTRIBUTED TO LOSSES IN GENERATION AND HAZARDOUS WORKING Im CONDITIONS.OE #S:OE20012,OE20535,oEl9214. I I !
I
RECURRING TASK ACTIVITY ** ** ** * * *** * **
**** ****
W/O NBR : R2104033 01 ** ** ** ** **** .**
** ** * * * ** *.* * ** ** **
A/R NBR *: A2168200
**
W/O STATUS.: HISTRY 29AUG07 **
** **
ACT STATUS : HISTRY 29AUG07 ** **
**
TYPE : ACT ** **
** ** **
PAGE: 03 ACTIVITY FOLLOWER DESCRIPTION STEP DESCRIPTION INITIAL/DATE NBR COMP LT INSP NOTE STEPS ANNOTATED WITH "CM-i" ARE REGULATORY COMMITTMENTS THEY CAN NOT BE CHANGED OR SKIPPED WITHOUT PERMISSION FROM REGULATORY ASSURANCE WITHOUT PERMISSION FROM REGULATORY ASSURANCE
- 1. PURPOSE:
A. THE PURPOSE OF THIS ACTIVITY IS INSPECT THE POLY BOTTLES IN THE TORUS ROOM FOR THE PRESENCE OF WATER.
- 2. CLEARANCE REQUIREMENTS:
A. NONE
- 3. OPS IMPACT STATEMENT:
A. NONE.
- 4. PRECAUTIONS A. USE EXTREME CAUTION WHEN WORKING ON OR NEAR ROTATING EQUIPMENT. REFERENCE THE MID-ATLANTIC ROG SAFETY AND HEALTH GUIDE AND PROCEDURE EN-OC-301 FOR
RECURRING TASK ACTIVITY **.***4***.** ********** **
**** *** **
W/O NBR R2104033 01 ** * ** ** **** ** A/R NBR : A2168200 *. ******* ** ** *. W/O STATUS : HISTRY 29AUG07 ** *****.* .* ** ACT STATUS.: HISTRY 29AUG07 ** ** ** ** TYPE ACT .. ** **
** pill, I*
PAGE: 04
--------- ACTIVITY FOLLOWER DESCRIPTION STEP DESCRIPTION INITIAL/DATE NBR COMPLT INSP CAUTIONS AND PRECAUTIONS ASSOCIATED WITH THIS WORK.
B. BE SURE A PRE-JOB BRIEF IS PERFORMED AND ALL CAUTIONS AND PRECAUTIONS ASSOCIATED WITH THIS ACTIVITY ARE PROPERLY ADDRESSED AND ANY AND ALL CONCERNS AND QUESTIONS HAVE BEEN RESOLVED BEFORE STARTING WORK.
- 5. SUPPORT INFORMATION A. NONE
- 6. JOB SCOPE A.INSPECTION OF POLY BOTTLES INSIDE THE TORUS ROOM. THERE ARE 5 POLY BOTTLES LOCATED AROUND THE OUTER PERIMETER OF THE TORUS.
THE INSPECTION SHALL INCLUDE CHECKING FOR THE PRESENCE OF WATER IN THE BOTTLES. DOCUMENT IN THE CREM IF WATER IS PRESENT, AND IF SO, WHAT IS THE LEVEL IN THE BOTTLE AND THE LOCATION OF THE BOTTLE (BY BAY ! NUMBER). ii I
RECURRING TASK ACTIVITY ** * ***. ** .*
*********.44 *.** .***
W/O NBR R2104033 01 ** ** ** * *** ** A/R NBR A2168200 ** ***** .** ** .** W/O STATUS : HISTRY 29AUG07 ** *****.* * ** ACT STATUS : HISTRY 29AUG07 ** ** ** .* TYPE : ACT ** ** *.
**** ** **
- PAGE: 05
-------- ACTIVITY FOLLOWER DESCRIPTION STEP DESCRIPTION INITIAL/DATE NBR COMPLT INSP B. IF WATER IS FOUND IN ANY OF THE POLY BOTTLESPERFORM THE FOLLOWING: - INVESTIGATE AND FIND THE SOURCE. - REQUEST A CHEMISTRY SAMPLE. DO NOT EMPTY ANY BOTTLES UNTIL A SAMPLE HAS BEEN TAKEN. - ISSUE IR - IDENTIFY BY BAY NUMBER WHICH BOTTLES HAVE WATER AND INDICATE THE LEVEL IN THE BOTTLE.
C. EMPTY BOTTLE AS DIRECTED BY ENGINEERING
I RECURRING TASK ACTIVITY ** ********** ** **
***. ********** **** ****
W/O NBR R2104033 01 ** ** ** ** **** ** .A/R NBR : A2168200 ** ********** ** **.
- W/O STATUS HISTRY 29AUG07 ** ********* ** **
ACT STATUS HISTRY 29AUG07 -* ** ** TYPE ACT ** ** **
**** ** ** **
SUMMARY
COMMvENTS: PAGE: 06 CAUSE CODE: REPAIR CODE: ADDITIONAL PAGES ATTACHED ? ETT REMOVED ?
==------------MEASUREMENT AND TEST EQUIPMENT-ID NUMBER DATE USED DESCRIPTION ADDITIONAL PAGES ATTACHED ? --------------------------- FINAL REVIEWS-...........-----------------------------
MAINT DATE : Qc DATE : OTHER DATE :
RECURRING TASK ACTIVITY ** ******* **
- W/O NBR : R2104033 01 ** ** ** ** *** **
I A/R NBR W/O STATUS ACT STATUS
A2168200* HISTRY HISTRY 29AUG07 29AUG07
** ** * ******** ** * ** ** * ** ** ,
TYPE : ACT ** ** ** PAGE: 07 MEASUREMENT AND TEST EQUIPMENT ACTIVITY ID NUMBER DATE USED DESCRIPTION 01 NO:NE
I RECURRING TASK ACTIVITY ** ********* ** * .W/O NBR R2104033 01 ** ** ** **** ** A/R NBR A2168200 ** ********* ** **
- W/O STATUS : HISTRY 29AUG07 ** ******** ** **
ACT STATUS ' HISTRY 29AUG07 -* ** ** ** ,TYPE ACT ** ** ** PAGE.: 08 I I
RECURRING TASK WORK ORDER *. ********* ** **
- 4*. **.4.4. ***.4. **..
NUMBER : R2088495 ACT ** ** ** .4 *..4
- PRIORITY :5 5* * ***,*.*** ** **
STATUS : ASIGND 240CT06 *. *****..*.* ** ** NBR OF ACTS: 05,** .* ** ** LAST UPDATE: 05NOV06 APPLICANTS EXHIBIT55 ** ." ** ** PRINT DATE : 05NOV06 .. ** ** W/O DESC LEAKAGE.MONITORING TORUS, SANDBEDS & RX DRAIN PAGE: 01 AR NUMBER : A2145130 RESPONSIBLE ORG : OEPB APPROVED BY : YARNES,R AR TYPE/SUBTYPE : RT ACT RESP FOREMAN : OEPB OC PLANT ENG BAL PLT MUC : C MAINT UNIT FEG OC 1 187 000 ATTACHMENTS: N M/U COMPONENT ID : OC 1 187 F MISC 187 MAINT UNIT DESCR : DRYWELL AND TORUS (SEE NRO1 & TORUS VESSEL) EQUIP REQD MODES : 5 QA CLASS PROCEDURE NUMBER : EQ : Y COMPONENT UPDATE : N SAFE S/D :
- ASME SECTION XI : Y BOM/PART UPDATE : N POST MAINT TEST : Y MOD NUMBER :_REPEAT/ PEP NBR :N NEXT DUE DATE 16OCT05 TASK FREQUENCY : 0001 TECH SPEC DATE : UNIT R ACCOUNTING DATA BUSINESS UNIT : 10105 PROJECT:
CUSTOMER: SUB ACCT: 517010 PRODUCT: DEPARTMENT: 05330 OPERATING UNIT: 83 U, OCLR00029083
RECURRING TASK WORK ORDER ** ********** ** *
-I NUMBER PRIORITY STATUS
- R2088495 5
- ASIGND ACT 240CT06
** ** *** ** ********* ** ** ** ** **** ** * ** * * -I I
NBR OF ACTS: 05 * ,, * **
** **
LAST UPDATE: 05NOV06 APPLICANT'S EXHIBIT 55 * ** PRINT DATE : 05NOV06 ***** ** ** ** W/O DESC LEAKAGE MONITORING TORUS, SANDEEDS & RX DRAIN ============================WORK ORD ER COMPONENTS============---------------------- PAGE: 02 U COMPONENT ID OC 1 187 DRYWELL AND TORUS F MISC 187 (SEE NR01 & TORUS VESSEL) I CHEM/RAD MAP LOCATION : MULTI 000 ASME SECTION XI: Y U QA CLASS EQ ============================COMPLETION VERIFICATION==========-----------------
- Y I
PKG ASSMBLED :. OTHER _ I__ RESP FOREMAN : REPEAT REQDA: I SSV VERIF ASME - ISI BY: N _____________________FCOMPLETE DATE: I =======================--===HISTORY VERIFICATION==------------------------------ COMIPNT UPDATE : _______ RMS DOC NBR : I BILL OF MATLS : RMS FILM NBR : 1 REPEAT REQD : _ A/R NBR: COMPLETE BY : HISTORY DATE : COMPLETION REMARKS=======-------------------------- REPEAT MAINT: N PEP NBR: _____ AS FOUND CONDITION: REPEAT AS 01:MAINT: ACT FOUND FIRST N WALKDOWN CONDITION: PEP NBR:COMPLETED WITH RX CAVITY FLOODED BY F.STULB NO WATER WAS DETECTED IN THE POLY BOTTLES. REPORT BEING GATHERED IN THE LR TEAM ROOM. FULL WALKDOWN 190CT06 190CT06 190CT06 I 19OCT06 POLY BOTTLES WERE WALKED DOWN BY PETE TAMBURRO OR BOB BARBIERI ON 10/16, 10/17, 10/18, AND 10/19. NO WATER WAS FOUND IN ALL FIVE BOTTLE. NO WATER WAS FOUND ON TORUS ROOM FLOOR. SECTION 19OCT06 19OCT06 19OCT06 I 6.1 OF WORK ORDER ENTERED BY PETE TAMBURRO TROUGH DRAIN WAS WALKED DOWN BY PETE TAMBURRO ON 10/16, 10/17, 190CT06 190CT06 190CT06 I AND 10/18 PRIOR TO REACTOR CAVITY FLOOD UP. NO WATER WAS OBSERVED 190CT06 FLOWING TO THE HUB DRAIN. ENTERED BY PTE TAlVIBURRO ON 10/19 AT 8:00 AM APPROXIMATELY 12 HOURS AFTER REACTOR SEC 6.2 19OCT06 190CT06 19OCT06 I CAVITY FLOOD UP THE TROUGH DRAIN LINE DOWNSTREAM OF V-18-131 WAS OBSERVED TO HAVE A SMALL CONITINOUS STREAM OF WATER ENTERING THE HUB DRAIN. THE SIZE OF THE STEAM WAS APROXIMATELY PENCIL SIZE AND ESTIMATED TO BY ABOUT 1 GPM. SEC 6.2 190CT06 190CT06 190CT06 19OCT06 I SIZE TOBY AOUT ND ETIMAED GPM.SEC-.2-1-CT0 I m OCLR00029084 I
RECURRING TASK WORK ORDER * ** NUMBER : R2088495 ACT ,* ** ,* ** **** ** PRIORITY :55 ** ********* ** ** STATUS : ASIGND 240CT06 ** * ** NBR OF ACTS: 05-* ** **
- APPLICANT'S EXHIBIT 55 ** ** ** **
LAST UPDATE: 05NOV06 PRINT DATE : 05NOV06 ****** ** ** ** W/O DESC LEAKAGE MONITORING TORUS, SANDBEDS & RX DRAIN PAGE: 03
---= == =============COMPLETION REMARKS===================. -----------
PEP NBR: ------ REPEAT MAINT: N ON 10/20 AT 1000 20OCT06 THE TROUGH DRAIN LINE DOWNSTREAM OF V-18-131 20OCT06 WAS OBSERVED BY BOB BARBIERI 20OCT06 TO HAVE A SMALL CONITINOUS STREAM OF WATER ENTERING 20OCT06 THE HUB DRAIN. THE SIZE OF THE STEAM WAS APROXIMATELY PENCIL 20OCT06 SIZE AND ESTIMATED TO BY ABOUT 1 GPM. SEC 6.2 20OCT06 20OCT06 20OCT06 ON 10/20 AT 10:00 THE 20OCT06 POLY BOTTLES WERE WALKED DOWN BY BOB BARBIERI AND WERE 20OCT06 NO WATER IN ALL 5 BOTTLES. SEC 6.1 20OCT06 20OCT06 20OCT06 21OCT06 ON 10/21 AT 13:30 21OCT06 THE TROUGH DRAIN LINE DOWNSTREAM OF V-18-131 21OCT06 WAS OBSERVED BY PETE TAMBURRO 21OCT06 TO HAVE A SMALL CONITINOUS STREAM OF WATER ENTERING 21OCT06 THE HUB DRAIN. THE SIZE OF THE STEAM WAS APROXIMATELY PENCIL 21OCT06 SIZE AND ESTIMATED TO BY ABOUT 1 GPM. SEC 6.2 21OCT06 21OCT06 21OCT06 ON 10/21 AT 13:30 THE 21OCT06 POLY BOTTLES WERE WALKED DOWN BY PETE TAMBURRO AND THERE WAS 21OCT06 NO WATER IN ALL 5 BOTTLES. SEC 6.1 21OCT06 220CT06 10/22/06 15:00 22OCT06 PERFORMED WALK DOWN IN TORUS ROOM AND INSPECTED ALL 5 POLY BOTTLES. 22OCT06 ALL WERE DRY, AS WERE THE HOSES. LOOKED UNDER TORUS FOR SIGNS OF 220CT06 WATER; NONE WAS PRESENT 220CT06 AR 220CT06 ALSO INSPECTED HUB DRAIN ON 75'. THERE WAS A CONTINUOUS FLOW 220CT06 CATEGORIZED AS A MODERATE SIZE PENCIL STREAM. THIS WAS CONSISTENT 22OCT06 WITH PREVIOUS INSPECTIONS. 220CT06 R. :BARBIERI 22OCT06 23OCT06 10/23/06 13:30 23OCT06 PERFORMED WALK DOWN IN TORUS ROOM AND INSPECTED ALL 5 POLY BOTTLES. 23OCT06 ALL WERE DRY, AS WERE THE HOSES. LOOKED UNDER TORUS FOR SIGNS OF 23OCT06 WATER; NONE WAS PRESENT 23OCT06 23OCT06 ALSO INSPECTED HUB DRAIN ON 75'. THERE WAS A CONTINUOUS FLOW 23OCT06 CATEGORIZED AS A MODERATE SIZE PENCIL STREAM. THIS WAS CONSISTENT 23OCT06 WITH PREVIOUS INSPECTIONS. 230CT06 PETE TAMBURRO 230CT06 24OCT06 10/24/06, 10:30 - 24OCT06 PERFORMED WALK DOWN IN TORUS ROOM. INSPECTED ALL 5 POLY BOTTLES AND 240CT06 CONNECTING TUBING. NO WATER OBSERVED. ALSO INSPECTED UNDER TORUS IN 240CT06 ALL BAYS. NO WATER PRESENT. 24OCT06 240CT06 OCLR00029085
RECURRING TASK WORK ORDER ** ********** *.* ** I' NUMBER PRIORITY STATUS
- 5
R2088495 5* ASIGND ACT 240CT06
** ** ** ******* ****,*,*** * ** ** *, **** ,* ** ** **
U NBR OF ACTS: LAST UPDATE: PRINT DATE : 05 05NOV06 05NOV06 A N EX 55 APPLICANT'SEXHIBIT55 ** **
,* ,B ** * ** *,
I W/O DESC LEAKAGE MONITORING TORUS, SANDBEDS & RX DRAIN PAGE: 04
============ -
====COMPLETION REMARKS=..=..... pg REPEAT MAINT: N PEP NBR:
PERFORMED INSPECTION OF REACTOR CAVITY TROUGH DRAIN ON 75'. LEAKAGE IS CONSISTENT WITH PAST INSPECTIONS. LEAKAGE IS STILL A MODERATE PENCIL STREAM AND IS STEADY. 24OCT06 24OCT06 240CT06 I R. BARBIERI 240CT06 10/25/06 20:30 PERFORMED INSPECTION OF REACTOR CAVITY TROUGH DRAIN ON 75' ELEVATION 25OCT06 24OCT06 25OCT06 I THERE WAS A PENCIL STREAM - NO CHANGE IN FLOW. PERFORMED WALK DOWN 25OCT06 OF ALL 5 POLY BOTTLES IN TORUS ROOM. ANY OF THE BOTTLES. THERE WAS NO WATER PRESENT IN WATER ON THE FLOOR TO THE LEFT OF NORTHEAST CORNER ROOM DOOR (BAY 17). WATER WAS NOTED DRIPPING FROM ABOVE AT 250CT06 25OCT06 25OCT06 I ABOUT 60+ DROPS PER MINUTE AND IS ALSO RUNNING DOWN THE SIDE OF THE TORUS AND COLLECTING UNDERNEATH. F. STULB 250CT06
.25OCT06 25OCT06 I
250CT06 10/26/06 14:30 INSPECTED TORUS ROOM FOR SIGNS OF WATER. ALL 5 POLY BOTTLES WERE EMPTY. NOTED PUDDLE ON FLOOR NEAR DRYWELL WALL IN BAY 11 (THE POLY-26OCT06 26OCT06 260CT06 I BOTTLE IN BAY 11 WAS EMPTY). DID NOT APPEAR THAT DRYWELL BUT NEED ADDITIONAL INSPECTION TO DETERMINE SOURCE. NOTE THAT 1-6. SUMP WAS TAGGED OUT AND WAS OVERFLOWING. THIS COULD BE THE CAUSE OF WAS WET, 260CT06 26OCT06 260CT06 I WATER IN BAY 11. IR SUBMITTED. 260CT06 INSPECTED TROUGH DRAIN. NO CHANGE FROM PREVIOUS INSPECTIONS. PENCIL STREAM NOTED. 260CT06 260CT06 260CT06 I R. BARBIERI 26OCT06 10/27/06 14:30 INSPECTED TROUGH DRAIN. NO CHANGE FROM PREVIOUS. PENCIL STREAM. 27OCT06 270CT06 270CT06 1 INSPECTED POLY BOTTLES. NO WATER IN ANY BOTTLES. FOUND DRYWELL WALL IN BAY 11, AND DETERMINED THAT DRYWELL WALL WAS WET. COULD NOT FIND SOURCE. NEED TO GO ON TOP OF TORUS. PUDDLE NEAR 270CT06 270CT06 270CT06 I REPORTED TO LICENSE RENEWAL TEAM. 27OCT06 ISSUED IR 549432-02 TO INSPECT SAND BED IN BAY 11. R. BARBIERI 10/28/06 14:00 270CT06 27OCT06 28OCT06 I INSPECTED TROUGH DRAIN AND NO CHANGE FROM PREVIOUS INSPECTIONS. THE LEAKAGE WAS PENCIL STREAM SIZE. INSPECTED TORUS ROOM AND ALL 5 BOTTLES WERE EMPTY. NO WATER ON FLOOR 28OCT06 28OCT06 28OCT06 I EXCEPT IN BAY 11 AS NOTED PREVIOUSLY. 28OCT06 DUE TO THIS WATER IN BAY 11, PERFORMED WALKDOWN ON TOP OF TORUS. NOTED WATER LEAKING FROM AROUND VENT PIPE. ABOUT 1 DROP EVERY 10 SECONDS. PETE TAMBURRO ENTERED TUNNEL AND INSPECTED INSIDE OF SAND 28OCT06 28OCT06 28OCT06 I BED. THERE WAS NO WATER PRESENT IN SAND BED AREA OR IN THE TUNNEL. R. BARBIERI 28OCT06 28OCT06 28OCT06 I 10/29/06 13:10 290CT06 INSPECTED TROUGH DRAIN AND NO CHANGE FROM PREVIOUS INSPECTIONS. .THE LEAKAGE WAS PENCIL STREAM SIZE. INSPECTED TORUS ROOM AND ALL 5 BOTTLES WERE EMPTY. NO WATER ON FLOOR 29OCT06 29OCT06 29OCT06 I EXCEPT IN BAY 11 AS NOTED PREVIOUSLY. PETE TAMBURRO 290CT06 OCLR00029086 I
RECURRING TASK WORK ORDER ** ******** ** **
*** ********** **** ****
NUMBER : R2088495 ACT ** * ** ** **** ** PRIORITY : 5 ** ********** ** ** ** STATUS : ASIGND 24OCT06 ** ********** ** ** NBR OF ACTS: 05 AP*C T* ** ** LAST UPDATE: 05NOV06 APPCANTSEXHIBIT55 ** ** ,e ** PRINT DATE 05NOV06 ** - ** W/O DESC . LEAKAGE MONITORING TORUS, SANDBEDS & RX DRAIN PAGE: 05
=======-==============------COMPLETION REMARKS REPEAT MAINT: N PEP NBR:
30OCT06 10/30/06 21:30 30OCT06 PERFORMED INSPECTION OF REACTOR CAVITY TROUGH DRAIN ON 75' ELEVATION 30OCT06 THERE WAS A PENCIL STREAM - NO CHANGE IN FLOW. PERFORMED WALK DOWN 30OCT06 OF ALL 5 POLY BOTTLES IN TORUS ROOM. THERE WAS NO WATER PRESENT IN 30OCT06 ANY OF THE BOTTLES. WATER ON THE FLOOR AND UNDER TORUS I BAY TO THE 30OCT06 LEFT OF NORTHEAST CORNER ROOM DOOR. WATER ON FLOOR 2-3 BAYS RIGHT 30OCT06 OF NORTHEAST CORNER ROOM DOOR. THERE WAS WATER ON THE FLOOR UNDER 30OCT06 THE TORUS NEAR BAY 11 BOTTLE AS NOTED IN PREVIOUS INSPECTIONS. 30OCT06 FRANK STULB 30OCT06 31OCT06 10/31/06 13:30 31OCT06 INSPECTED TROUGH DRAIN AND NO CHANGE FROM PREVIOUS INSPECTIONS. A 31OCT06 PENCIL STREAM WAS NOTED. 31OCT06 INSPECTED POLY BOTTLES IN TORUS ROOM. ALL WERE EMPTY. NO WATER FOUND 31OCT06 EXCEPT AS PREVIOUSLY NOTED. 31OCT06 R. BARBIERI 31OCT06 31OCT06 11/01/06 17:30 01NOV06 INSPECTED TROUGH DRAIN AND NO CHANGE FROM PREVIOUS INSPECTIONS. A 01NOV06 PENCIL STREAM WAS NOTED. 01NOV06 INSPECTED POLY BOTTLES IN TORUS ROOM. ALL WERE EMPTY. NO WATER FOUND 01NOV06 EXCEPT AS PREVIOUSLY NOTED. 01NOV06 PETE TAMBURRO 11/1/06 01NOV06 01NOV06 11/03/06 00:20 MIKE HAND 03NOV06 INSPECTED TROUGH DRAIN AND NO CHANGE FROM PREVIOUS INSPECTIONS. A 03NOV06 INSPECTED POLY BOTTLES IN TORUS ROOM. ALL WERE EMPTY. NO WATER FOUND 03NOV0.6 ENTERED BY PETE TAMBURRO ON 11/3/06 A 7:14 03NOV06 03NOV06 11/3/06 15:30 03NOV06 ADDITIONAL INSPECTIONS PERFORMED DURING FLOOD UP WERE AS FOLLOWS: 03NOV06 INSPECTED CEILINGS ON 75' FOR SIGNS OF WATER ON A DAILY BASIS. NO 03NOV06 WATER WAS FOUND. ALSO INSPECTED PIPE PENETRATIONS INTO THE POOLS AND 03NOV06 CAVITY, AND NO WATER WAS FOUND. 03NOV06 A. HERTZ INSPECTED ELECTRICAL PENETRATIIONS AND FOUND NO 03NOV06 SIGNS OF WATER. 03NOV06 THE 2 EQUIPMENT POOL DRAINS WERE ALSO INSPECTED ON A DAILY BASIS. NO 03NOV06 WATER WAS OBSERVED FROM THESE DRAINS. 03NOV06 R. BARBIERI 03NOV06 03NOV06 ON 11/3/06 AT 16:30 THE TROUGH DRIAN WAS INSPECTED AND NO WATER 03NOV06 WAS OBSERVED FLOWING FROM THE DRAIN. PLEASE NOTE REACTOR 03NOV06 CAVITY DRAIN DOWN WAS COMPLETED A 1 AM ON 11/3/06 03NOV06 PETE TAMBURRO 03NOV06 03NOV06 11/03/06 20:30 03NOV06 PERFORMED WALK DOWN OF ALL 5 POLY BOTTLES IN TORUS ROOM. THERE WAS 03NOV06 NO WATER PRESENT IN ANY OF THE BOTTLES. 03NOV06 FRANK STULB 03NOV06 04NOV06 OCLR00029087
RECURRING TASK WORK ORDER ** ********** ** ** I NUMBER PRIORITY STATUS
- R2088495
- 5
- ASIGND ACT 240CT06
** * ** ** ********* ** ********** ** ** ** **** ** * **5
- I NBR OF ACTS: 05 LAST UPDATE:
PRINT DATE : 05NOV06 05NOV06 APPLICANTSEXHIBIT55
** ** ** ** ** * ** ** ** ** **
I WIO DESC REPEAT MAINT: N LEAKAGE MONITORING TORUS, SANDBEDS & RX DRAIN PEP NBR:
=COMPLETION REMARKS===============
PAGE: 06 I REFERENCE ACTIVITY 03 BOROSCOPE OF THE 5 SANDBED DRAINS WERE 04NOV06 PERFORMED ON 10/210/06. THE INSPECTION FOUND THAT THE DRAIN 04NOV06 IN BAY 7 WAS BLOCKED. IR 547236 WAS ISSUED. 04NOV06 11/04/04 23:30 05NOV06 PERFORMED WALK DOWN OF ALL 5 POLY BOTTLES IN TORUS ROOM. THERE WAS 05NOV06 NO WATER PRESENT IN ANY OF THE BOTTLES. THIS iS THE LAST INSPECTION 05NOV06 OF THE POLY BOTTLES FOR IR21. THE PM FOR THE QUARTERLY INSPECTIONS 05NOV06 DURING THE OPERATING CYCLE SHOULD BE INITIATED. 05NOV06 FRANK STULB 05NOV06 AS LEFT CONDITION: A03: REVIEW OF VIDEO AFTER DRAIN WAS CLEARED WAS SATISFACTORY. ALL 30OCT06 DRAINS ARE NOW CLEAR. A03 AND A04: VERIFICATION OF THE SAND BED DRAINS AS BEING CLEAR WAS PERFORMED BY PETER TAMBURRO AFTER THE COMPLETION OF THE CLEANING DTBO 30OCT06 31OCT06 31OCT06 I REQUIRED BY IR 547236 ON BAYS 7 AND 11. ALL SAND BED DRAINS ARE NOW 31OCT06 VERIFIED CLEAR BASE ON THE REVIEW OF THE VIDEO BY PETER TAMBURRO THIS WAS VERIFIED BY DAN BARNES AND DOCUMENTED HERE BY TOM QUINTENZ TEQO 31OCT06 31OCT06 31OCT06 I WORK PERFORMED: A02 SUPPORT NOT REQUIRED. DTBO 04NOV06 I I 1 I I I I
'I I
OCLR00029088 I
24ý 7 .7 7 ,Av 7, 777 RECURRING TASK WORK ORDER ** , ,* ** NUMBER : R2088493 ACT ** ** ** ** * ** PRIORITY :!5 ** ****5**,* ** ,* ** STATUS : HISTRY 29APR07 * ,****** ** ** NBR OF ACTS: 06 ** ** ** LAST UPDATE: 29APR07 APPLICANT'S EXHIBIT 56 .* ** ** ** PRINT DATE : 09AUG07 ** ** .* W/O DESC CAMERA INSPECTION OF REACTOR CAVITY DRAIN LINE PAGE: 01 AR NUMBER : A2145128 RESPONSIBLE ORG OMM3 APPROVED BY : -DOLL RICK AR TYPE/SUBTYPE RT ACT RESP FOREMAN : OMM3 MAINTENANCE TEAM 3 MUC C MAINT UNIT FEG : OC 1 187 000 ATTACHMENTS: N M/U COMPONENT ID : OC 1 187 F MISC 187 MAINT UNIT DESCR : DRYWELL AND TORUS (SEE NR01 & TORUS VESSEL) EQUIP REQD MODES : 5 QA CLASS : __ PROCEDURE NUMBER : EQ : Y COMPONENT UPDATE : N SAFE S/D : ASME SECTION XI : Y BOM/PART UPDATE : N POST MAINT TEST : Y MOD NUMBER :_REPEAT/ PEP NBR : N NEXT DUE DATE 17oCT06 TASK FREQUENCY " 0001 TECH SPEC DATE UNIT : R ACCOUNTING DATA BUSINESS UNIT : 10105 PROJECT: CUSTOMER: SUB ACCT: 517010 PRODUCT: DEPARTMENT: 05322 OPERATING UNIT: 83
RECURRING TASK WORK ORDER ** ********* *, **
*****,****** **** ****
NUMBER : R2088493 ACT ** ** ** ** **** ** PRIORITY :5 * ********* ** ** ** STATUS HISTRY 29APR07 ** *-***** ** ** NBR OF ACTS: 06 ** ** ** ** LAST UPDATE: 29APR07 ** ** ** ** PRINT DATE : 09AUG07 ** **
- win nn CAMERA. TNSPECTTON OF REACTOR CAVTTY DRPATN T.TN*' .3
--------------------- WORK ORDER COMPONENTS-----------------------------
COMPONENT ID OC 1 187 F MISC 187 DRYWELL AND TORUS (SEE NRO1 & TORUS VESSEL) m m-CHEM/RAD MAP LOCATION : MULTI Q00 ASME SECTION XI: Y QA CLASS EQ : Y
- ===================COMPLETION VERIFICATION---------------...- = .....
PKG ASSMBLED : JCC6 COLUCCI, JOHN C OTHER_: RESP FOREMAN : COLUCCI, JOHN C REPEAT REQD : I SSV VERIF ASME - ISI BY:
N N COMPLETE DATE: 06NOV06 I
---------------------------.. HISTORY VERIFICATION===-----------------------------
COMPNT UPDATE BILL OF MATLS REPEAT REQD
- _N
- N BLIP NBR FILE LOCATION:
A/R NBR BOX:
0000 I COMPLETED BY CLOSED BY CAUSE CODE
- COLUCCI, JOHN C
- JOHNSTON, IRENE L
- CA COMPLETE DATE: 06NOV06 HISTORY DATE : 29APR07 REPAIR CODE : NF I
----------------- COMPLETION REMARKS====-----------------------------
REPEAT MAINT: AS FOUND CONDITION: N PEP NBR: ACT 01 ZERO BLOCKAGE FOUND. PETE TAMBURRO HAS VIDEO OF BOROSCOPE. 06NOV06
!
DRRO 06NOV06 06NOV06 ACT 02 ZERO BLOCKAGE FOUND. PETE TAMBURRO HAS VIDEO OF BOROSCOPE. 06NOV06 DRRO 06NOV06 06NOV06 I HAVE REVIEWED BOTH VIDEOS AND FOUND NO BLOCKAGE. PETE TAMBURRO 10APR07 WORK PERFORMED: ACT 03: ERECTED SCAFFOLD C6-1510 AS DIRECTED. ELECTRONIC SIGNOFFS 040CT06 PERFORMED BY A.M.STANFORD FOR G.LANE. 04OCT06 ACT 02: INSPECTIONS PERFORMED IAW WORK STEPS. RESULTS SAT. PETE 240CT06 TAMBURRO HAS VIDEO. DRRO 24OCT06 ACT 01: INSPECTIONS PERFORMED lAW WORK STEPS. RESULTS SAT. PETE 06NOV06 TAMBURRO HAS VIDEO. DRRO 06NOV06 ACT.04 REMOVED SCAFFOLD C6-1510 AS DIRECTED. GAL3 17NOV06 23APR07 A05: ACTIVITY HAS BEEN COMPLETED. SEE AS FOUND SECTION FOR PETE'S 23APR07 COMMENTS. FGAO 23APR07 A06: NO WORK PERFORMED 25APR07 SUSPECTED CAUSE OF FAILURE: NO FAILURE THESE TASK 25APR07 I 0
RECURRING TASK ACTIVITY ** ********* *** ** W/O NBR R2088493 01 *. ** *. ** ** A/R NBR : A2145128 ** ******* * ** ** W/O STATUS : HISTRY 29APR07 ** **,****** ** ** ACT STATUS : HISTRY 29APR07 ** * **
- TYPE ACT ** * **
PAGE: 01
--------------------------- DESCRIPTION-W/O DESCRIPTION CAMERA INSPECTION OF REACTOR CAVITY DRAIN LINE ACT DESCRIPTION PRE-OUTAGE INSP. OF RX CAVITY DRAIN LINE.
PERFORMING ORG : OMM3 RECURRING TASK NBR: PM18703M PRI: 5 COMPONENT ID : OC 1 187 F MISC 187 EQUIPMENT LOCATION: MULTI 000 CLR NUMBER : 6501333 QA CLASS:_0 EQ:_Y WO RESP ORG : OMM3 FEG : OC 1 187 000 DATE/SHIFT : 130CT06 X FOREMAN :-MAINTENANCE TEAM 3 CHARGING WORK CENTER: 05322 SSV AUTH :_DATE . N/A ORG-INSP/HOLD : _. .. .. . ACT TYPE C SUPPORT DATES: N/A N/A PREPARED BY :-DOLL, RICK DATE :09MAY06 HOLDS : MODE N PARTS N CHEM + RAD CLR PLAN SCH
---.-------------- SAFETY/PLANT IMPACT CONSIDERATIONS-.............
BARRIER PERMIT RQD: CHEMICAL HAZARD : N CSP REQ : N FIRE PROTECTION N SECURITY : N FSI REQ :.N HAZARD BARRIER :_N /
--------- =CHEM AND RAD DATA -
SYSTEM BREACH : Y INSULATION REQUIRED: N HWP REQ : N SCAFFOLDING REQD : Y TECH SPEC: N MULTIPLE WORK LOC : MAP NBR:
.HP REQD : T HP TECHNICIAN SUPPORT REQUIRED ---------------------- SCHEDULING DAT A----------------------
PREMIS ID : IP41 187 SCHED ID/WIN : 1P41 187 START DATE : 090CT06 EST DUR (HRS) : 1 POST MAINT TEST: CLEARANCE.REQD : __Y_ DUE DATE : 17OCT06 TECH SPEC: N/A DOSE ESTIMATE : 0016 mR
............- INITIAL REVIEWS--- ...... --------.--------
ASME/ISI REVIEW : YARNES,R ASME XI R&R: DATE: 05SEP06 QC PLAN REVIEW : YARNESR NOCR DATE: 05SEP06 APPROVED BY . YARNES,R DATE: PRINT NAME AND WRITE INITIALS OF ALL PERSONNEL WHO INITIALED THIS ACTIVITY
I RECURRING TASK ACTIVITY ** ********** ** ** W/O NBR R2088493 01 ** ** ** ** **** ** A/R NBR A2145128 ** ********** ** *, ** W/O STATUS : HISTRY 29APR07 ** ********* ** ** ACT STATUS : HISTRY 29APR07 ** ** ** ** TYPE ACT ** ** ** PAGE: 02 i
-------------------------ACTIVITY PROCEDURE LIST HP SPECIAL INSTRUCTIONS
- OC-1-05-00057 - MECHANICAL & ELB MAINTENANCE, & NMD
+/-rE,'T'AL
- KNOWLEDGE OF THE RADIOLOGICAL CONDITIONS IS REQUIRED PRIOR TO ENTERING THE RCA UNLESS ESCORTED BY AN RP TECH.
- PC REQUIREMENTS PER RADIOLOGICAL POSTINGS OR PER RP.
- SEE FIN RWP RADPRO RP JOB STANDARDS FOR RESIN CHARGE TO CATION TANK.
- THIS RWP IS NOT VALID FOR HRA,LHRA,VHRA.
IR21 REACTOR BUILDING GENERAL MAINTENANCE
- KNOWLEDGE OF RAD CONDITIONS REO'D PRIOR TO ENTRY TO RCA W/OUT RPT ESCORT.
m
- A DOCTIMENTEI) HRA RP BRIEF IS REOUIRED FOR ALL ENTRIES INTO ARFA5~ PO5~TED AS~ p "LOCKED HIGH RADIATION AREA", AND "HIGH RADIATION AREA".(REF RP-AA-460)
- PC REQUIREMENTS PER RADIOLOGICAL POSTINGS OR PER RP.
- UAT(PWPiP QTT.T. WEAZR FDOqTMPPRY qf TT-TTER E*P.(OU-RE CAN PP MfnMTTn'PVPPn TM h?'TV V
- AIR SAMPLING PER RP
- OBTAIN CURRENT RADIOLOGICAL CONDITIONS FROM RP
- SURVEYS REQUIRED FOR OVERHEAD AREAS, SYSTEM BREACH, GRINDING AND DRILLING
- INTERFACE WITH RADPRO ON ALL WORK IN RCA
- DEBRIS HAS BEEN IDENTIFIED AS THE PRIMARY CAUSE OF FUEL FAILURE IN THE NUCLEAR INDUSTRY.EACH PERSON PERFORMING WORK ON A COMPONENT OR SYSTEM IN PLANT HAS THE RESPONSIBILITY TO BE THE PRIMARY BARRIER FOR PREVENTING THE ENTRY OF FOREIGN MATERIAL INTO THE COMPONENT OR SYSTEM.
- OC-1-06-00080 - REACTOR BUILDING HIGH RAD AREAS
- KNOWLEDGE OF THE RADIOLOGICAL CONDITIONS IS REOUIRED PRIOR TO ENTERING THE
- IL G C L C. N. I IO S I E U R D P.... IO O. E.. T R
... N .. ...
KN W .. E G . OF.
. THE .. RA RCA UNLESS ESCORTED BY AN RP TECH. I
- A DOCUMENTED HRA RP BRIEF IS REQUIRED FOR ALL ENTRIES INTO AREAS POSTED AS i "LOCKED HIGH RADIATION AREA", AND "HIGH RADIATION AREA". (REF RP-AA-460)
- PC REQUIREMENTS PER RADIOLOGICAL POSTINGS OR PER RP.
- RADIOLOGICAL CONDITIONS CAN CHANGE BASED ON REACTOR POWER LEVEL, HYDROGEN INJECTION, RECIRC FLOW, SULFATE LEVEL AND WORK LOCATIONS.
REMOTE MONITORS AND HISTORICAL DATA MAY BE USED.
" REFER TO RWP SUPPORT GUIDELINES FOR ADDITIONAL INFORMATION NOT VALID FOR RWCU AREAS, SDC AREAS, RBEDT ROOM, OR TIP SHIELD AREA.
- RWP IS NOT VALID FOR VHRA'S AND D/W AT POWER.
- RPT TO PERFORM A SURVEY AT SYSTEM OPENING, OR ANY CHANGE IN CONDITIONS.
- DOSE RATE METER REQUIRED TO PULL TRASH/PCS FROM ANY HIGH RAD AREA, MATERIALS > 5MR/HR AT 30CM NEED RP COVERAGE PRIOR TO MOVEMENT.
- CONTACT RADENG FOR ANY TASK EXPECTED TO RECEIVE 50 MREM OR GREATER. I 11 amil I'
APPLICANT'S EXHIBIT 57 AN$M Paper No. ,. The NACE International Annual Conference and Exposition CORROSION MANAGEMENT IN THE ARUN FIELD L. M. Riekels, R. V. Seetharam, R. M. Krishnamurthy, C. F. Kroen, J. L. Pacheco, R. H. Hausler, and V. A. W. Semerad Mobil Oil Corporation 13777 Midway Road Farmers Branch, TX 75244-4312 N. Kaczorowski Mobil Oil Indonesia, Inc. P.O. Box 61, Lhok Seumawe North Aceh Province, Sumatra, Indonesia ABSTRACT A risk model has been developed to identify the probability that unacceptable downhole corrosion would occur as the Arun field was depleted. Using the life expectancy estimates for the carbon steel tubing strings from-this model, optimized mitigation strategies could be developed to provide cost-effective alternatives for the management of corrosion. Keywords: localized corrosion, downhole corrosion, condensate inhibition, corrosion risk model, extreme value statistics, Arun corrosion, life expectancy INTRODUCTION The Arun field, located on the northern coast of the Aceh province in North Sumatra, Indonesia, is a gas condensate reservoir that was discovered in 1971 and has been.in production since 1977. The reservoir is a compositionally dynamic system where retrograde condensation, condensate revaporization, water vaporization, mixing of lean injection gas, gas dehydration, and booster compression impact reservoir performance. In order to manage corrosion and its potential impact on gas deliverability, it was necessary to assess the probability that unacceptable .downhole corrosion would occur as the Arun field Was depleted. The changes in the wellbore environment over time which could influence corrosion kinetics had to be identified. Reservoir model data were used as inputs for a compositional tubing hydraulics program. This program generated pressure-temperature profiles in the wellbores as a function.of depth, liquid dropout volumes for water and hydrocarbon phases, and the properties of the liquid films that develop during annular two-phase flow.. Using multi-parameter regression analysis, results from field workover inspections, and laboratory corrosion testing, a corrosion risk model was developed to provide estimates of the life expectancy for the existing tubing in the Arun wellbores. Optimized mitigation strategies could then be developed to provide cost-effective alternatives for the management of corrosion. Copyright
©1996by NACE International. Requests for permission to publish this manuscript in any form, in part or in whole must be made in writing to NACE International, Conferences Division, P.O. Box 218340, Houston, Texas 77218-8340. The material presented and the views expressed in this paper are sclely those of the author(s) and are not necessarily endorsed by the Association. Printed in the U.S.A.
PREVIOUS WORK A significant effort(I,2,3,4,5,6, 7 ) has been expended in the evaluation of the probability for downhole corrosion as the field is depleted. The complexity of the downhole environmental systems and the potential synergy between the variables in these systems has presented a continuing challenge to those attempting to interpret dynamic corrosion behavior throughout the life of the reservoir. Predictions of the probability for unacceptable corrosion of the L80. tubing string completions in the Arun wellbores is complicated by the interaclive variables in the environment, including wellstream composition, reservoir pressure, flow regime-pressure-temperature profiles in the tubing string, condensate quality and wetting characteristics, tubing metallurgy, shear stress, and water condensation and composition. It has been known that with pressure depletion of the reservoir, substantial water vaporization would occur, resulting in an exponential increase in the water vapor fraction. No movement of the gas/water contact in the reservoir was anticipated so all liquid water production would be due to the condensation of water vapor. Due to the high production rates, the Arun wells have been in an annular mist flow regime with the majority of the liquid entrained in droplets in the flowing gas stream. As the pressure declines, less liquid hydrocarbon and more water is produced and the produced gas becomes leaner due to the reinjection of separator gas. The injected gas changes the composition of the reservoir gas and lowers the dew point pressure of the mixture. In most condensate wells, the hydrocarbon condensate is produced along with a small amount of condensed water. However, if the water condenses in the production tubing string before the hydrocarbon condensate is formed, a corrosive condition may exist. When the tubing walls become wet with C02 saturated water, it is known that the corrosion rate can increase dramatically. Corrosion would.be expected
!
to be proportional to the time fraction that the metal is wetted on a microscopic scale by the aqueous phase. No corrosion would take place if the hydrocarbon is a continuous'phase on the steel surface. Impingement of water droplets on the steel surface will, in effect, increase the amount of water exposure even if the oil phase is continuous on the steel surface. Thus, high flow rates can contribute .to the water wetting and corrosion. (8) Liquid Volume Ratio of Water and Hydrocarbon ! Some rules of thumb( 9 ) have been developed regarding the water production rates and the wetting of steel sjrfaces. The interfacial properties of the liquids, both water and hydrocarbon, with steel will determine 5 which species will preferentially wet the surface. Research(10) has indicated that. the nature of the oil itself.U will affect these wetting tendencies. Using the rules of thumb from field experience and the similarities between the Arun condensate and other condensates which have been studied, it was suspected that the Arun condensate may.naturally inhibit corrosion under certain producing conditions. Based on field experience and experimental work with condensates reported in the literature, it was hypothesized that the volume ratio of liquid water to liquid hydrocarbon greater than about 0.5 (one-third water and two-thirds condensate) would be likely to result in corrosion, which could vary from mild to severe depending on the corrosivity of the acidic water. Both liquid water and liquid condensate will condense out in a tubing string whentheir respective dew points have been reached. In a preliminary analysis with an initial version of a reservoir simulation model for! the Arun field and a downhole tubing hydraulics program,(1) the liquid volumes for both water and hydrocarbon phases were estimated in one tubing string over time. as the reservoir was depleted. Figure 1 shows the profiles of the volume ratio of liquid water to liquid hydrocarbon vs. the tubing temperature from bottomhole to the top of the tubing string. The increase in the volume ratio with time is evident. A zone of high probability corrosion damage was estimated with boundaries as the temperature range from 225 to I 275°F (1.07 to 1350C), where previous work( 3 ) had shown maximum susceptibility to localized corrosion, and a minimum value of 0.5 for the volume ratio of water to hydrocarbon. With this preliminary prediction, it was estimated that serious wellbore corrosion problems. could be encountered at the top of this tubing string by the year 2000.
.3 *..
In order to attempt to identify possible alternatives to manage the occurrence of unacceptable corrosion, an interdisciplinary team then began to further refine the assumptions and to verify the hypothesized parameter ranges for corrosion damage for all 78 producing wells. I 24/2 '
Reservoir Management Data The downhole environment in Arun wellbores is the result of the complex interaction between thermodynamic and flow phenomena: As the Arun fluid undergoes retrograde condensation, liquid drops out in the reservoir and reduces well productivity. This changes inflow conditions suchas bottomhole pressures and well production rates.
" As the reservoir depletes, and as injected gas breaks through, the composition of the fluid entering the wellstream changes. " The temperature profile along the tubing string is determined by the type of completion fluid used, well ratE, and wellstream compositions.
- Changes in the temperature .and pressure along the tubing string result in hydrocarbon liquid dropout.
' The extent of such dropout increases initially as the pressure drops (retrograde condensation), then decreases as the pressure drops further (revaporization). The liquid volume also increases at cooler temperatures and varies with the fluid composition. " The water vapor content of the wellstream increases rapidly as the reservoir pressure depletes. This water then condenses on the tubing string increasingly as it reaches lower temperatures and pressures.
When the well rate drops below a critical point, the gas phase is unable to carry the entrained liquid and the well shuts down due to liquid loading. All of these phenomena and their interaction were modeled using a compositional tubing hydraulics program. This program solves the thermodynamic, momentum, and energy equations to fully capture the above effects. It has been validated against field measured pressure traverses which have shown that the model predictions agree well with field data over a wide range of conditions. In the reservoir, single phase flow is assumed, with liquid dropout effects captured in the form of an effective permeability. A simple pseudo-gas potential (m(p)) equation is used for this single-phase gas inflow, including non-Darcy effects. The wellbore calculations, however, are fully compositional and involve multiple phases. A correlation was developed for the Arun field, relating field-measured condensate-to-gas ratios iCGRs) and separator temperatures to the composition of the wellbore gas. This correlation, which accounts for compositional changes due to pressure depletion and mixing with injected lean gas, was verified against simulation. results and a limited number of field composition measurements. The Peng-Robinson equation of state (EOS)(1 8 ) is used to model the thermodynamic equilibrium assumed prevalent in each of the tubing segments and a 9-component fluid model is used to represent the Arun gas condensate. The amount and compositions of: each of the three phases (wellstream gas, liquid hydrocarbon, and liquid water) in each. segment are determined by solving the thermodynamic equations. Energy balance equations are used to model heat loss from the wellstream to the surroundings and the. resulting temperature. profile in the tubing string. The modified Gray correlation (1 9 ) for multi-phase flow is used to predict pressure drops in the segments, based on amount of. liquid present, diameter and roughress of the segments, and properties of the various phases present. The compositional tubing hydraulics program can determine the tubing head pressure (THP) at a given well rate, or alternatively, predict the well rate at a given THP. The downhole environment parameters for each of the 78 Arun wells were generated over the past producing life (history phase) and overthe projected flowing life (prediction phase). In the history phase, field data sources such as the production database, buildup and shut-in pressure surveys, fluid analyses, and well diagrams were used to extract input data. Downhole environment parameters.were generated for each month that the well was operational. The measured historical rates were specified as input, and the resulting tubing head pressures were matched to field measured values by tuning the effective permeability. in the inflow equations. In the predictive phase, results from the Arun full-field reservoir simulation study played a crucial role. Resenvoir pressure decline, wellstream composition changes, and tubing head pressures were extracted 24/3
from the simulation runs. Calculations were carried out into the future for as long as the well would produce above the loading rate. When the well loaded, the tubing size was reduced and calculations were resumed. When the well loaded with a 3.5-inch (8.89 cm) inner diameter tubing string, it was assumed to be permanently shut-in. Multi-parameter Regression Analysis The inspection data from the workovers of fourteen Arun wells, which had not been exposed to acid stimulation fluids, provided maximum pit depth data based on measurements of remaining wall thicknesses. The production lives .of these fourteen wells ranged from 1.6 to 11.7 years with. maximum localized corrosion (pit) penetration rates ranging from 0 to 225 mils per year (mpy) (5.72 mm/y) for the 7-inch (17.78 cm) L80 tubing with a nominal wall thickness of 0.498-inch (1.265 cm). The monthly outputs from the corresponding history.phase calculations for each of these wells generated downhole environment parameters for each tubing string segment which included the liquid water and liquid hydrocarbon dropout volumes, liquid film thicknesses and velocities, shear stresses, surface tension, gas and liquid densities and viscosities, superficial gas and liquid velocities, temperatures, and pressures, and individual wellstream components. In addition to the outputs, H2 S and C02 concentrations and produced water compositions along with conductivity, total dissolved solids, and pH data were also available from field measurements of test separator samples. The maximum corrosion penetration rate was used in multi-parameter regression fits against combinations of 65 independent variables to examine the relative influences of the parameters in explaining the variation in the corrosion rates. Polynomial fits were attempted with single variables and combinations of variables. The following quadratic equation expresses a relationship for which the analysis of variance indicated statistical significance: 2 Maximim Penetration Rate (mpy) = 0.75 + 143.6 (H20/HC) + 430.1 .(H20/HC) The variable (H 2 0/HC) is the volume ratio of liquid water to liquid hydrocarbon on the tubing walls. Figure 2 depicts the relationship graphically. The degree of fit could only be improved marginally with the addition of, or interaction with, other variables. This relationship, while certainly not explaining all of the variability in the corrosion response, suggested that the ratio of liquid water to liquid hydrocarbon was a parameter that had a significant influence on the corrosion behavior of the L80 carbon steel tubing strings in the Aruan field. Natural Corrosion Inhibition by Arun Condensate Experimental work was then conducted to confirm the degree of natural corrosion inhibition provided by the Arun condensate. Using the reservoir simulation data for field production through the year 2000, critical variable ranges were established to simulate a severe scenario in the future in which the highest acidU gas partial pressures would occur within the temperature range from 225 to 275°F (107 to 135 0C). This worst case environment would occur when wellhead pressure and temperature declined to approximately 2000 psi (13790 kPa) and 250°F (1210C), respectively. Corresponding partial pressures for C02 and H 2 S were established as 300 psi (2069 kPa) and 0.1 psi (0.69 kPa), respectively. Arun produced water containing 55 ppm chlorides, simulated in the laboratory, and stabilized Arun condensate from the field were used with various L80 carbon steel tubular metallurgies. ' I Preliminary work was conducted using a flowloop at the University of Aachen, Germany with water to hydrocarbon ratios of 1.0 (50% water: 50% condensate) and 0.25 (20% water: 80% condensate). Localized corrosion,, as reflected by a maximum local penetration rate, assuming that a pinhole shaped pit would continue to penetrate the wall thickness of the tubing, was calculated from the pit depth measurements taken using a laser profilometer system. Irrespective of the exact nature of the L80 carbon steel metallurgy tested, both maximum local penetration rate and the general weight loss corrosion rate were significantly reduced as the relative condensate volume was increased. Extensive laboratory work was then conducted tol characterize the Arun condensate and evaluate the influence of the water to hydrocarbon ratio on the corrosion behavior under Arun wellbore conditions. 24/4 I
Since the preliminary work had shown that both localized corrosion and general weight loss corrosion had been reduced as the condensate volume increased, an experimental program was designed to quantify the effects of varying the fluid volume'ratio, first through the use'a short exposure screening test and, subsequently, with longer exposure .stirred autoclave tests. The screening tests were conducted under atmospheric pressure at.130 0 F (54 0 C) for 10 hours-using CO 2 gas with 1000 ppm H2 S ina total liquid volumae of-30 ml.. The apparatus is depicted in Figure 3. The specimen surface area to water volume ratio was maintained at a minimum of.15 Cm. Autoclave testing was conducted using a fixed cage configuration in one-gallon autoclaves as shown in Figure 4. Exposure time in these tests was 72 hours with the partial pressures and temperature representative of the severe conditions previously referenced. A specimen surface area to liquid water volume ratio of 25 cm was maintained throughout this testing. Unlike previous testing using a high speed rotating cage configuration(2). the cage was fixed and auxiliary propellers were used for stirring. Liquid samples withdrawn from the autoclaves at various depths demonstrated that.the propeller configuration and rotation rate significantly. influenced the degree of mixing of the water and the condensate fluids. Sufficient mixing to properly expose the steel coupons to the appropriate fluid volume ratio could only-be achieved with a fixed cage configuration. t Figure 5 summarizes the influence of water to hydrocarbon ratios on the geieral weight loss rates and the localized penetration rates from the autoclave tests. At.a water to hydrocarbon ratio of 0.25 (20% water, 80% hydrocarbon), the significant inhibiting influence of. the Arun condensate is very evident for both localized as well as general corrosion. Realizing that the composition of the condensate would change over time and, in particular, that the higher molecular weight fractions were likely to remain in the reservoir as the pressure diminished, it became important to isolate the range of the inhibiting components and their effectiveness. Molecular characterization of ten representative samples of the Arun condensate over the period from .1979 to 1991 demonstrated that the condensates became slightly depleted in compounds > n-C1 I and enriched in the lighter hydrocarbon compounds. A spinning band vacuum distillation unit was then used to separate the Arun condensate into groups of components. The composition of each of the distillation cuts was verified with gas chromatography. Screening tests were. conducted to attempt to isolate the range of inhibiting components within the. condensate. Figure 6 shows the corrosion -responses for the various condensate composition ranges of the distillates at a constant water to hydrocarbon ratio of 14. Clearly, the inhibiting components resided in the component range> n-C 13 and most likely within the band from n-C15 to n-C23. Detailed molecular analysis indicated that the alkylated carbazoles could be responsible for the inhibition. A trend analysis of changes in molecular character with time indicated that the carbazoles in the range of n-C17 to n-C22 would be expect.d to remain throughout the flowing life of the reservoir. Alloy Alternatives To evaluate, other corrosion mitigation opportunities, autoclave testing was also conducted on a variety of 13% chrome alloys, a 15% chrome material, and on 9%.chrome-l% molybdenum tubular materials. Table 1 summarizes the test conditions that were used to evaluate the corrosion performance of these- materials. No localized corrosion was exhibited by any of the. 13% chrome materials. or the. 15% chrome material tested. The 9% chrome-1% molybdenum materials exhibited slight pitting when exposed to the conditions in test A. Slow strain rate testing of the 13% chrome materials in 300OF (1499C) deoxygenated Arun water at 300 psi (2069 kPa) C02 partial pressure and H2S partial pressures ranging from. 0.06 (0.41 kPa) to 0.1 psi (0.69 kPa) with a strain rate of lx 10 E-6 in. / sec. (2.5x10-5 mm/sec.) did not exhibit any evidence of sulfide stress corrosion cracking susceptibility. The-13% chrome alloys were thus viable corrosion mitigation alternatives for the wellbore environmental conditions projected to be prevalent during the remaining flowing life of the Awun wells. Corrosion Risk Model Development II is customary when characterizing the localized, corrosion response of a material to measure. the maximum pit depth from the distribution of pit depths that are visible and use that pit depth and the exposure time to calculate the maximum penetration rate. In a similar fashion, pit depth measurements reported from 24/5
workover inspections or caliper logging reflect the maximum pit depths encountered along the lengths of the tubulars. 1 The classical applications .of statistical methods which deal with average values or symmetrical distributions become inadequate when the parameters of interest are the largest or smallest in the range of possible values. The distribution curve of largest values is skewed with the maximum to the left of the mean and ehibits a long tail extending to the right side. This distribution follows matlhematical rigor represented by extreme value statistics. (11) Applications for extreme value techniques have included gust velocities for airplanes, extinction times for bacteria, and extremes in meteorological phenomena including floods and
'1 droughts. There have, also been applications of extreme value statistics to the depths of corrosion pits.(1 2 . 13 , 1 4 )
In. using the extreme-value methodology,( 1 5, 1 6 , 1 7 ) all the observed maxima are ranked in order of size from the smallest to the largest. A plotting position is determined for each observation by associating a probability P. where P = i / (n+1) with each observed maximum value (n). The (i) is the rank of the observation, starting with the smallest. When the dataare plotted on extreme-value probability paper, an ideal extreme value distribution will plot exactly as a straight line. The closerness of plotted points to a straight line is an indication of how well the data fit the extreme value theory. Figure 7 provides examples of the extreme value fits for two sources of corrosion rate data: pit depths from field workover inspections and pit depths from autoclave testing. The high r2 values indicate that the extreme value theory is followed relatively well. The degree of fit improves with large data sets and with the use of accurate and reproducible measuring devices. Using the extreme value fits for field workover, corrosion logging, and laboratory data, a series of extreme value equations with the best fits (r2 > .95) was assembled and plotted collectively. The volume ratio of liquid water to liquid hydrocarbon generated from the tubing hydraulics calculations that corresponded to the exposure time and tubing segment location for each extreme fit line were superimposed on the collective plot. Figure 8 shows the composite plot of the extreme value lines and the water to hydrocarbon ratios. Clearly, the slope of the extreme value line increased as the water to hydrocarbon ratio increased. Using the extreme value lines, it then became possible to estimate a tubing life expectancy for exposure to the corresponding volume ratios of water to hydrocarbon in the wellbore. Tabulated probability values",15 ) can be used to calculate the corrosion rate at a 95% probability from the variate, which was the horizontal axis on the extreme value probability paper. When the nominal wall thickness of the tubing, 0.498 inch (1.265 cm), was divided by the corrosion rate at a 95% probability, the life expectancy in years was estimated for the full wall penetration by a corrosion pit. 3 The estimated life expectancy associated with the volume ratio of liquid water to liquid hydrocarbon to which a portion of the tubing string was exposed constituted the framework of the corrosion risk model. The model is based on probability and is not intended, nor should it be used, to provide quantitative corrosion rate information. It cannot guarantee that corrosion will occur or when it will occur but provides a risk assessment of the potential that it might occur and when it might occur. It can be used as a tool to forecast the influence of corrosion damage on gas deliverability and to evaluate potential scenarios involving investments in corrosion mitigation alternatives. 3 As shown in Figure 9, as the reservoir pressure drops over time, the volume ratio of liquid water to liquid hydrocarbon increasesto large values. However, the wellbore environment conditions are unique for each well and the change in the ratio with time differed for each of the 78 wells. The mean volume of liquid water and the mean volume of liquid hydrocarbon within a tubing segment was calculated from the monthly outputs over two-year producing increments. The ratio of the two means was calculated and the appropriate coefficients from the extreme value equation were selected to represent that time interval. This was repeated for approximately two-year time steps until the production for each well had been terminated. An iterative computer program was written to use the inputs from the two-year increments to calculate a the cumulative pit depths for incremental time steps assuming that once a pit is initiated, it penetrates the tubing wall continuously if the wellbore environment conditions are corrosive. Time increments of less than two years were not used due to evidence of large, non-random variability in the mean fluid volumes. A 95% probability was used to calculate the life expectancy for the full-wall penetration of the tubing using a best 24/6 1 i
case, a mid-case, and a worst case scenario. The life expectancy was also calculated for smaller increments of wall thickness penetration where the designed structural capacity of the tubing under pressure may have been at risk. The validity of the model was evaluated using corrosion pit depth data from workover inspections and corrosion logging that had not been used in the development of the model. Figure 10 is a graphical depiction "of the correspondence between the risk model predictions for the range of wall thickness and those
- measured. From this, it was established that there was at least an 80% confidence level for a 95%
*probability of corrosion risk. This corrosion risk model was then applied to calculate the life expectancies of the carbon steel tubing in each of the tubing segments for each of the 78 wells.
Figure 11 summarizes the comparison of the predicted life expectancy at the uppermost tubing segment of the well vs. the projected flowing life for 18 of the wells. The prediction shows that penetration of
- the tubing wall will occur due to corrosion in all but a few of the wells prior to the end of their flowing life. In some wells, the tubing penetration would be projected to occur one to two years in advance of a tubing size reduction necessitated by liquid loading conditions in the well. The impact o' an earlier-than-expected
'recomiletion to a smaller tubing size on gas deliverability needed to be taken into account in the development of an optimized corrosion management program.
The tubing wall penetration occurs because the natural inhibition protection afforded by the Arun condensate has been diminished by the increasing liquid water volume on the tubing walls. Corrosion mitigation alternatives under consideration included condensate reinjection to adjust the volume ratio of liquid water to liquid hydrocarbon to lower ranges and workovers to replace some or all of the tubing with carbon steel or 13% chrome alloy. Life expectancy calculations were made for each tubing segment in a well, at intervals of 1000 feet or less, in order to evaluate the depth requirement for corrosion mitigation alternatives. The projected depth requirement for the corrosion mitigation varied from well to well but generally averaged approximately the upper-half of the total completion length. Figure 12 summarizes the life expectancy projections for the uppermost tubing segment after the recompletion of the 18 wells shown in Figure 11 with new L80 carbon steel. In this scenario, the wells were recompleted just prior to the, earliest point in time that wall penetration was projected to occur for the original tubing. Of the 18 wells recompleted, half would now be expected to survive until the tubing was changed out and replaced with 5-1/2-inch (14 cm) diameter tubing to maintain the flowing life of the wells. Corrosion risk model calculations were conducted for a variety of scenarios for each well in order to weigh -he impact of the corrosion risk over time on gas deliverability and the cost of the corrosion mitigation option. A corrosion management program emerged from these scenarios that incorporated the most cost-effective combination of the alternatives for the remaining life of the field. The optimized corrosion management program consisted of a combination of the 13% chrome alloy and carbon steel tubing in some wells and the use of carbon steel tubing in others. Corrosion monitoring will continue to provide feedback data fcr the refinement of the risk model and its application for the cost-effective management of corrosion
.as the Arun field depletes.
CONCLUSIONS
- 1. The integration of reservoir simulation data, tubing hydraulics calculations of the downhole wellbore environments, and the corrosion pit distributions from field data and laboratory experiments provided the framework for the development of a corrosion risk model.
- 2. A multi-parameter regression showed that the volume ratio of liquid water to liquid hydrocarbon on the tubing walls had a significant influence on corrosion behavior in the Arun field.
'3. The Arun condensate provided natural corrosion inhibition for carbon steel tubing at a volume ratio of liquid water to liquid hydrocarbon of 0.25.
- 4. Extreme value methodology provided a good representation of the distribution of corrosion pit depths from field workover inspection, corrosion logging, and laboratory data.
- 5. A validity analysis of the risk model with a 95% corrosion probability indicated that there was at least an 80% confidence level for the prediction.
24/7
II 6.. Life expectancy calculations using the corrosion risk model provided the basis to develop an optimized deolrrsion management strategy to minimizethe impact of corrosion on gas deliverability as the reservoir I ACKNOWLEDGMENTS The authors gratefully acknowledge the technical assistance provided by T. Lindsey, C. Walters, C..Hellyer, M. Lawrey, F. Tarzian, and R. Santos in the experimental work conducted at MEPTEC and the
.
contributions of G. Schmitt and W. Bucken at the University of Aachen. The authcrs also wish to thank Mobil and Pertamina managements for permission to publish this Work. 3 I II U j II II Ii II II 24/8 1 Il
REFERENCES
- 1. Shea, R. H., Ott, R. E, Salz, L. B.: "Arun Well Simulation Model Development," Corrosion 90, #4, NACE, (April 23-27, 1990).
- 2. Stegmann, D. W., Hausler, R. H., Cruz, C. I., Sutanto, H.: "Laboratory Studies on Flow Induced Localized Corrosion in CO2/H2S Environments, I. Development of Test Methodology," Corrosion 90,
#5, NACE, (April 23-27, 1990).
- 3. Hausler, R. H., Cruz, C. I., Sutanto, H.: "Laboratory Studies on Flow Induced Localized Corrosion in CO2JH2S Environments, II. Parametric Study on Effect of H2S, Condensate, Metallurgy, and Flowrate,"
Corrosion 90, #6, NACE, (April 23-27, 1990).
- 4. Hausler, R. H., Stegmann, D. W., Cruz, C. I., Tjandroso, D.: "Laboratory Studies on Flow Induced Localized Corrosion in CO2/H2S Environments, Ill. Chemical Corrosion Inhibition," Corrosion 90, #7, NACE, (April 23-27, 1990).
- 5. Drake, D. E., Sutanto, H., Colwell, J. A., Stiegelmeyer, W. N.: "Corrosion Resistance of Materials Under Arun Field, Indonesia Conditions Part I.," Corrosion 90, #57, NACE, (April 23-27, 1990).
- 6. Colwell, J. A., Steigelmeyer, W. N., Drake, D. E., Sutanto, H.: "Corrosion Resistance of Materials Under Arun Field, Indonesia Conditions Part II.," Corrosion 90, #58, NACE, (April 23-27, 1990).
- 7. Sutanto, H., Semerad, V. A. W., Bordelon, T. P.: "Simulation of Future Wellbore Corrosion With Low Production Rate Field Test," Corrosion 91, #571, (March 5-11, 1991).
- 8. Lotz, U.: "Velocity Effects in Flow Induced Corrosion," Corrosion 90 #27, NACE, (April 23-27, 1990).
- 9. EnDean, E. J.: "Corrosion Control in the Well Bore," Petr. Engr., (Aug. 1976), p 50.
- 10. Lotz, U. van Bodegom, L., Ouwehand, C.: "The Effect of Type of Oil or Gas Condensate on Carbonic Acid Corrosion," Corrosion 90 #41, NACE, (April 23-27, 1990).
- 11. Gumbel, E. J.: Statistics of Extremes, Columbia University Press, New York City, (1958), p 20.
- 12. Aziz, P. M.: "Application of the Statistical Theory of Extreme Values to the Analysis of Maximum Pit Depth Data for Aluminum," Corrosion, vol. 12, (Oct. 1956), p 495t.
- 13. Eldredge, G. G.: "Analysis of Corrosion Pitting by Extreme-Value Statistics and Its Application to Oil Well Tubing Caliper Surveys," Corrosion, vol. 13, (Jan. 1957), p 51t.
- 14. Nicholls, J. R., Stephenson, D. J.: "A Life Prediction Model for Coatings Based On The Statistical Analysis of Hot Salt Corrosion Performance," Corrosion Science, vol. 33, no. 8, (1992), p 1313.
- 15. Probability Tables for the Analysis of Extreme-Value Data, National Bureau of Standards, Applied Mathematics Series 22, (July 6, 1953), U.S. Dept. of Commerce.
- 16. Natrella, M. G.: Experimental Statistics, National Bureau of Standards Handbook 91, (August 1963),
U.S. Dept. of Commerce, p 19-1.
- 17. Hahn, G. J., Shapiro, S. S.: Statistical Models in Engineering, John Wiley & Sons, New York City, (1967), p 112.
- 18. Peng, D. Y. and Robinson, D. B., "A New Two-Constant Equation of State." I. & E.C. Fundamentals, Vol. 15, no. 1, (1976), p 59.
- 19. API Manual 14BM: SSCSV Sizing Computer Program, 2nd Edition, Appendix B - Vertical Flow Correlation - Gas Wells, (1978), p 38.
24/9
TABLE 1 AUTOCLAVE CONDITIONS USED TO EVALUATE CHROME ALLOYS Test Environment Temperature (*F) ExposureTime (hrs.) A. Air saturated Arun simulated water, 300 psi CD 2 , 0.1 psi H 2 S partial pressure 250 72 D. Test A conditions but with non-deoxygenated Arun simulated water 250 72 C. Test A conditions but with deoxygenated Arun simulated water 250 72 D. Test A conditions but with deoxygenated Arun simulated water. 300 72 E. Test A conditions but with deoxygenated Arun simulated water 350 72 F. De3oxygenated Arun simulated water and Arun condensate at a volume ratio of 4, 250 72 with 300 psi CO 2 , 0.1 psi H 2 S partial pressure
- 3. TTest F conditions but with a volume ratio of 14 250 72 24/10
100 0 10 C) 0.1 E 0.01 100 200 300 400 Temperature ( F) Figure 1. Fluid volume ratio profiles from the bottom to the top of the tubing string in one Arun well throughout time. The boundaries of the high probability corrosion damage zone are superimposed. The bottomhole temperature is approximately 325'F (178'C) throughout time. (I mpy=0.0254 mnlyr) 250 0 0
.U 200 U
N CU M M 0) C6
.U U
U. U a E 50 0.1 0.2 0.3 0.4 0.5 0.6 H 2 0 /HC Figure 2. The quadratic fit for the volume ratio of liquid water to liquid hydrocarbon on the tubing walls 2 vs. the maximum corrosion penetration rate in mils per year. The r correlation coef/icient for the fit was 0.749. (1 mpy = 0.0254 mm/yr) 24/11
H2S Nitrogen CO 2 To H 2 S Absorber ml Flask H 2 0 / condensate Stirrer Figure3. Atmospheric Screening Test Apparatus Rotating Cage Fixed Cage Magnedrive Stirrer ________ 3" Diameter Propelfer Upper Cage Plate Spedcmens Lower Cage Plate Cage Support C oupling .................
. .........
4" Dlameter Propeller Figure4. Comparison of autoclave test configurations for a rotating cage and a fixed cage. (1 inch = 2.54 cm) 24/12
81O0 Localized Penetration Rate. - 6 30
\
S41O0 Z A/ Genera- We 2( General Weight Loss 0.25 1 4 14 H 2 0 / HC Figure 5. Influence of volume ratio of liquid water to liquid hydrocarbon on general weight loss corrosion rates and on maximum localized penetration rates from autoclave tests. The size of the diamond represents the 95% confidence about the mean, shown as the horizontal line. (1 mpy = 0.0254 mm/yr) 0* E 30-20-L.., 10-K~5~ nC=-13 nC=0-17 I nc<=20 I nC<=23 nC<=25 4Y+AAA J nC> 13 nC>'7 I n0>20 nC>23 II nC>2. Condensate Composition Range in Distillate Figure6. Weight loss corrosion rates for the compositional ranges in the condensate distillates as determined by the screening test at. a constant volume ratio of liquid water to liquid condensate distillate fraction of 14. ( 1 mpy = 0.0254 mm/yr) 24/13
I I 1000 250 N I 800 200 I
- 600 C 150 (a) (b) 2 400 200 r2 = 0.985 0
r2 = 0.954 I
-2 -1 0 1 Variate 2 3 4 100- -2 I -1 0 I
1 I Variate 2 i 3 3 4 I Figure 7. Extreme value plots for laboratory autoclave tests with Arun saturated water only ( a ) and for field workover data from a well ( b ). (1 mpy = 0.0254 mm/yr) I I I
.2 3
I 1.0 2.0 3.0 4.0 5.0
.I -1.0 0.0 Variate Figure 8. Composite plot of extreme value fits for both field and laboratory data and corresponding volume ratios of liquid water to liquid hydrocarbon.
(1 mpy = 0.0254 mm/yr) 24114 II Ii
260O 300 U'U W)- 4000" 0200 200' S2000- 100.
"
1001 o o WU 1985 1995 2005 1985 1.995 2005 Time Time Figure9. Changes in reservoir pressure and the volume ratio of liquid water to liquid hydrocarbon over time from reservoirsimulation and the tubing hydraulics calculations. (1 psi = 6.895 kPa) AA F A G A IL
-~ M K 17 A I N s A UQ 0
R S A T V K 100 200 3.00 400 . 50 Remaining Wall Thickness (mils) Risk Model Prediction A Actual Measured Figure 10. Summary of validity check for corrosion risk model with workover and corrosion logging data. (I mi = 0.0254 mm) 24/15
Well A .............................
................ ............ ... ........ ............ ......
B ..... ..... I ITTT7TTTTTI] C .7 ............. D E ........... ..........
.......... ..
F ........... G H I J 77-77777-777 F II II I I Ir-M K L M
.................................... .......... ........ ............................... ... ........................................... ....... ...... ......... ::. .........
I
. .. .. ....... ... .
I N 0 X. M P Q R 199) 1995
"'A III IIIIIII III IM 2000 2005 I
Time Figure11. Flowing Well Life 100% Penetration Summary of the life expectancies for the uppermost segment of carbon steel strings in 18 Arun wells 5 1/2- Tubing
.I based on the corrosion risk model estimates. A comparison is made with the flowing well life and the projected timing for recompletion with 5 1/2" ( 14 cm ) tubing is shown.
I Well rs A I B C D E ..... <. c%,....5.:.x-.5%........ .......... . I G H I F I J K L
...... ..... .......... . .. . . ... . . . . .. . ...
X. I M .......... N ... ......... 0 P Q R .. .. . . . . .. . . . ......... INIffTTT7TTTrrM 1990 1995 2000 2005 Time Flowing Well Life 1 100% penetration i m 5 1/2" Tubing Figure 12. Summary of the life expectancies for the uppermost segment of carbon steel tubing strings in the same 18 Arun wells in Figure 11, for which recomplelion was made with new carbon steel prior to the onset of wall penetration of the original tubing. ( 5 1/2" = 14 cm) 24/16 I
APPLICANT'S EXHIBIT 58 Paper No.CO R S N Development Of a Corrosion Inhibition Model
]: Laboratory Studies R.H. Hausler Corro-Consulta 7804 Pencross Lane Dallas, TX 75248 T.G. Martin Mobil Exploration and Producing U.S., Inc.
1200 Timberloch Place The Woodlands, TX 77389-4999 D.W. Stegmann, M.B. Ward Baker Petrolite 1600 Industrial Blvd. Sugar Land TX 77478 ABSTRACT The production of a CO 2 flood in the Oklahoma panhandle led to severe corrosion of the carbon steel production tubing and casing. Traditional approaches to chemical corrosion inhibition were unsuccessful. A laboratory study was initiated to determine first the best corrosion inhibitor, and second the optimum effective inhibitor concentration in the produced fluids as a function of the production rate, CO 2 partial pressure, and water to oil ratio. The tool used was the high speed autoclave test (HSACT) discussed in earlier publications. Statistical experimental designs were used to study the three major parameters. The results were expressed in terms of the inhibitor concentration necessary to achieve a desired corrosion rate (for example 1 mpy), and presented eithe- in the form of response surfaces or linear multiple regression equations. While it was generally known that higher fluid velocities require a higher inhibitor concentration for equal target corrosion rates, it was less well appreciated that the CO2 partial pressure also has a significant effect on the effective inhibitor concentration. The model as represented either by the response surface or the predictive equations is both inhibitor and field specific. Keywords: carbon dioxide, fluid velocity, partial pressure, corrosion inhibitor, modeling, statistical design, response surface, effective inhibitor concentration, target corrosion rate, Copyright
©1999by NACE International. Requests for permission to publish this manuscript in any form, inpart or in whole must be made inwriting to NACE International, Conferences Division, P.O. Box 218340, Houston, Texas 77218-8340. The material presented and the views expressed .in this paper are solely those of the author(s) and are not necessarily endorsed by the Association. Printsd in the U.S.A.
I U BACKGROUND i
- 1. Introduction Mobil E & P US, Inc. operate a CO 2 flood in Texas County, Oklahoma which is known -as the Postle Field. The Field produces from the Morrow Sand formation at a depth of 6000 ft., The field was discovered in 1958 and has been in continuous production since that time. CO2 flooding began in November 1995 and severe corrosion was experienced on select wells in this field shortly after CO 2 breakthrough. The corrosion was extremely rapid, new tubing strings would be severely damaged, both internally and externally and a number of casing failures occurred. The corrosion took the form of typical flow induced corrosion, with a MESA pattern and penetration rates in excess of 300mpy. The corrosion was reported, by field personnel, to be associated with CO 2 breakthrough corrosion pattern throughout the field was irregular, however. Although the CO 2 was moving through the formation exactly as planned, and CO2 breakthrough was predictable some wells would experience severe corrosion and others would not.
Typically, sandstone formations, when flooded with CO2, generate a more corrosive environment on the production side than limestone (carbonaceous) formations (Ref 1). Not only is corrosion more severe, but it is also more difficult to chemically inhibit with traditional corrosion inhibitors (Ref 2, 3). There are many reasons for this. The lower bicirbonate concentrations often found in brines from sandstone formations result in lower pH's,.particularly when CO 2 is produced back at increased partial pressure. C02 breakthrough also leads to increased liquid volumes produced through the production tubing, or the casing space in the case of packerless completions. It has been demonstrated in numerous generic studies (Ref 4) that the effective corrosion inhibitor concentration i.e. the concentration required to achieve a specified (low) corrosion rate depends, -amongst other things, upon in situ pH, the relative liquid velocity I) and the oil/water ratio. When formulating a corrosion inhibition program for a field, these 3 variables must be taken into account but are sometimes overlooked. This paper describes the work undertaken to develop a corrosion inhibition model for the Postle Field which takes account of all the important production variables.
- 2. Previous Experience Extensive laboratory and field studies had been undertaken in the mid 1980's in an effort to bring corrosion in Shell's Little Creek (Mississippi) CO2 flood under control (Ref. 5, 6). This is also a sandstone flood, albeit from greater depths (14,000 to 15,000 ft) and therefore with higher shut-in bottomhole pressures (6000 psi). Upon CO2 breakthrough, bare tubing had been observed to corrode uniformly and with pronounced mesa type attack to less than half of its original thickness in 3 to 4 months with the most severe damage occurring at the upstream pinends. The effectiveness of the chemical corrosion inhibition program was monitored with coupons installed at either the well head, or the high and low pressure manifolds to the plant inlet where the flowlines from different wells came o The linear liquid velocity relative to the metal surface.
together. Along with the corrosion, production rates and CO 2 partial pressures were monitored and associated with the individual coupon corrosion rates for the period of exposure. After over 240 corrosion rate data points had been accumulated, a least squares multiple linear regression analysis was attempted over the following parameter space: Table 1 Parameters Monitored Significant Natural log of Parameters Effect Superficial Gas Velocity yes 0.252302 Superficial Liquid Velocity yes 0.674294 Type of Inhibitor (A, B,) yes A +0.539158 B -0.539158 Inhibitor Concentration no Water Prod. Bbl/MMscf no CO 2 Partial Pressure, P yes - 0.228016 Water/Oil Ratio yes -0.199186 Natural log of Identity (intercept) i.065763 The resulting correlation equation for Inhibitor A has the following form: In (corr. rate) = 1.066 + 0.5392 + ln(Usc)*0.2532 + ln(UsL)*0.6743 + (1) ln(Water/Oil)*(-0. 1992) + ln(P)* (-0.2280) () The factors were significant at the 95+% level except for the pressure (93 %). In interpreting these results one must remember, that all corrosion rates were obtained under inhibited conditions and at the low temperatures prevailing on the surface. The effects therefore are relatively small, but nevertheless indicate that inhibitor B was about 3 times as effective as inhibitor A, a result that had been predicted from laboratory studies. The inhibitor concentration did not seem to affect the corrosion rate, because essentially all results had been obtained at near-constant inhibitor concentrations. The superficial gas and liquid velocity effects were both positive as expected. However, the negative effects of the water/oil ratio and the pressure were surprises. Since the inhibitors were both oil soluble and had very little water solubility and/or dispersibility, and since furthermore the dosage was based on total fluid production, it was argued that a higher water/oil ratio would increase the inhibitor concentration in the oil, and thereby increasing inhibition (lowering the corrosion rate) under turbulent conditions in the production tubing and flowlines. The thought was that an increased inhibitor concentration in the oil would lead to more effective adsorption on the metal surface, even though with the increased water cut the frequency of oil droplets in turbulent flow contacting the metal surface might be diminished. It should be added that such an effect is probably inhibitor specific and might be observed only with oil soluble poorly dispersible compounds. Figures 1 0 for Inhibitor B the second number in equation 1 would have a negative sign indicating superior activity.
I and 2 show calculated corrosion rates for Inhibitor A first as a function of the superficial gas and liquid flow rates (Fig. 1) and then as a function of the water/oil ratio and the CO 2 partial pressure (Fig. 2). I The pressure effect was clearly unexpected and contrary to everything that had been known previously. For this reason it was studied more extensively in the laboratory. I
- 3. Laboratory Studies of Pressure Effect I The high-speed autoclave rotating cage methodology (Ref. 7, 8 ) was chosen for this investigation. The test conditions are summarized in Table 2: U Table 2 I Parameter Brine Value 100,000 ppm cr I 10,000 ppm Ca+
Autoclave 1,000 ppm Mg+ 3.75 L I Brine Vol. 1800 ml Hydrocarbon Hydrocarbon Vol. Isopar M 200 ml U Inhibitor (concentration in active B ingredients) Corrosion Coupons L-80 1 Coupon size (4 per test) 30 cm 3 Temperature Gas 125 F CO2 I Pressure Speed of rotation of cage Test duration Variable 1500 rpm 100 hrs I The iron in solution was measured at intervals during the test, and the total iron in solution at the end of the test was compared to the weight loss. Generally in excess of 95% of the weight loss iron was found I in solution. It was felt, therefore, that corrosion kinetics could be estimated from the iron counts. The test protocol was essentially identical to the one listed in Appendix 1. Typically the corrosion rates were observed to drop within the first two or three hours to a steady state level which was very close to the I average weight loss corrosion rate. Quoting the average corrosion rates for the 100 hour test period will therefore represent a realistic picture of the degree of inhibition which could be achieved at each pressure level with each inhibitor concentration. I The results are shown in Figure 3. The concentrations for Inhibitor B are given in active ingredients which are generally 50% by weight of the formulation. I Below 450 psi CO 2 partial pressure the corrosion rate increases with pressure at constant inhibitor concentration as expected. This is equivalent to saying the effective inhibitor concentration increases I I I
with CO 2 pressure. Above 450 psi the corrosion rate decreases with pressure, which mirrors the field experience. Whether the observed maximum is indeed at 450 psi is open to question since the test pressures were chosen arbitrarily and spaced fairly widely, but there is no doubt that a maximum exists. The range of pressures recorded along with the corrosion rates in the field varied from 250 psi to about 1800 psi with, however, only few data points below 450 psi. The multiple linear regression analysis did therefore show a negative pressure effect, with reduced significance (93%), because it could not account for the inherent non-linearity of the corrosion rate - pressure relationship. INHIBITOR DEVELOPMENT FOR TIE POSTLE AREA
1. Background
In view of the facts, as known from the above and discussed in earlier studies, it was not immediately obvious whether the corrosion inhibitor used at the time across the Postle field was a) the best product available, b) used at the appropriate concentration and c) used in such a manner as to be transported to those areas in the production system where it was needed most. The wells at Postle are to a large extent equipped with electrical submersible pumps in packerless completions (Fig. 4). The miscible pressure in the reservoir is about 3600 psi. Flowing bottom hole pressures are of the order of 2500 psi. However, the pressure at the pump intake depends on the fluid level maintained in the casing space for optimum pump efficiency and the flowline pressure (150 to 200 psi). The fluid level can vary from 500 to 2000 feet resulting in pump intake pressures from about 450 to 1100 psi2). The pressure inside the production tubing above the pump is always of the order of 2000 to 2500 psi (corresponding approximately to the static pressure of the fluid column in the production tubing), and therefore higher than the pressure on the annular side. All gas not separated out in the gas separator upstream of the pump, will therefore most likely be in solution in the fluids in the tubing, at a concentration corresponding to the partial pressure prevailing on the casing side, or slightly higher3). The flow regime in the tubing will be full liquid flow up to the point where the static pressure is lower than the bubble point pressure of CO 2. At that point gas will break out of solution and a three phase flow (gas, oil, water) will develop. As a consequence of this the mixture velocity will increase andcan easily reach 3 fold the velocity of the liquid alone depending on the pump intake pressure; (the higher the fluid level the greater the pump intake pressure and the more gas dissolves in the liquids). The flow conditions in the tubing therefore change from the bottom to the top along with the chemical conditions in the liquid. Lower flow rates, higher temperatures and higher CO 2 concentrations prevail at the bottom while higher up in the production tubing the temperature and CO 2 partial pressure will be lower while the flow rate can be considerably higher. It is, under these conditions not a priori possible to predict the minimum effective inhibitor concentration. A similar situation exists on the annular side and is even less accessible to prediction. The flow condition here will always be gas churning up the annulus through the fluid level forming a frothing liquid until the gas velocity is high enough to gas lift liquids from the casing space. At this time some 2)these numbers are approximate because they also depend on the mixture density of the fluids in the annulus.
- 3) It appears that the downhole gas separators placed ahead of the pump intake have an efficiency of 80% and perhaps even higher.
sort of slug flow or eventually annular flow will develop. The flow intensity (shear stress) will depend on the gas flow rate up the annulus, which in turn depends on the pressure, hence the fluid level. In general one would expect again that the higher the pressure (fluid level) the lower the "flow intensity, but the greater the C0 2 partial pressure. Even though all these parameters can be calculated, their relationship to corrosion and corrosion inhibition has never been established and it is impossible in a situation of this kind to guess at the effective inhibitor concentration for those areas experiencing most severe corrosion conditions. The chemical treatment of these wells consisted originally of weekly batch treatments into the annulus with an over-flush of produced fluids. As the CO2 breakthrough occurred, continuous treatment facilities were installed. The corrosion inhibitor was injected continuously into the annulus with an over-flush of produced fluids. Because the turbulence at the well head could potentially carry some or all of the inhibited fluids into the gas flowline at surface, 40 ft injection capillaries were installed with the expectation that the injected fluids would bypass this turbulent zone and still fall to bottom. Later, some full length capillaries were installed in selected wells (Fig. 4) in order to mix the inhibitor into the produced fluids at the perforations and thereby protect the casing and liner below the pump intake. The estimate of the effective inhibitor concentration, which had been shown to be dependent on pressure and flow rate remained elusive however, and became the subject of the subsequent study.
- 2. Laboratory Evaluation of the Effective Inhibitor Concentration.
Test Methodolo*T and Preliminary Inhibitor Selection For the purpose of determining optimum use concentrations for inhibitors in a situation where the CO 2 partial pressure, the flow rate and the water cut of the produced fluids can all change in wide limits, high speed autoclave rotating cage methodology (HSAT)was again chosen. This methodology has been described in numerous prior publications (Ref. 7. 8, 9, 10). The generalized test protocol is detailed in Appendix I. Since at Postle the concern was both with preventing corrosion of the production tubing as well as the casings, all representative metallurgies (J-55, N-80, L-80 and AISI-1018) were included. The rotating cage contained in general two J-55 coupons and one each of N-80 and L-80 cut from tubing 'sections received from the field. In order to assess the corrosion kinetics and to establish steady state corrosion rates continuous PAIR (LPR) measurements were made along with iron count studies. The build-up of iron in the test solution during the 120 hr test was monitored often enough to establish an adequate corrosion rate - time trend which could be compared with the PAIR - time trend and from which the steady state (final corrosion rate) could be extracted. The PAIR corrosion rate readings, however, were more difficult to interpret. The weight-loss corrosion rates of the AISI-1018 electrodes were many times (2 to 10 times) greater than the corrosion rates obtained by averaging the PAIR measurements over time4 ) 5). It was therefore necessary to rely almost exclusively on the iron count kinetics. It was found that the steady state corrosion rate was generally established within a few hours of the start of the test and differed little from the average weight-loss corrosion rate, particularly in those situations where good inhibition was achieved.
- 4) Averages were obtained by integrating the area under the corrosion rate-time curve and dividing the integral by the total time.
- 5) This effect was later also observed in the field and will be discussed in the following publication I
Initially a fair number of inhibitors, selected for the purpose by experienced personnel in two supplier companies, were tested under the most severe conditions anticipated in the field 6) at 100 ppm each. The results ranged. from zero protection all the way to about 90 or 95% protection. Table 3 Screening of Inhibitors at 100 ppm in the HSAT at 750 psi C0 2 , 1500 rpm, 160 OF, Averages of aH Metals Inhibitor General Local Corrosion Weight-loss mpy Rate mpy C 66.8 700 D7 243 1620 E 284 3000 F 73 2700 G 775 4400 On this basis Inhibitor C was selected for a detailed parametric study in an effort to determine the optimum effective concentration over a producing parameter range expected to prevail in the field. Test Matrix The test matrix for inhibitor C is shown in Fig. 5. The choice in rotational speed (500, 1000, and 1500 rpm) was somewhat arbitrary in that the most severe flow conditions had to be represented as well as milder ones, but not so low that the oil and water phases in the autoclave would not be properly mixed. It was verified that at 500 rpm good mixing still prevailed in the autoclave with, however, much lower shear stresses. The test pressures varied over a range which can be expected to prevail in the Postle wells. The water to oil ratio initially was chosen at 1.8 to be varied later. The test matrix was planned as a 22 factorial design with a center point to facilitate assessment of non linearity in the resulting correlations. The objective of the series was to evaluate the inhibitor concentration necessary to achieve a target corrosion rate, rather than determining the corrosion rate at a given inhibitor concentration. In order to do this it was necessary to perform several tests with different inhibitor concentrations at each of the five test conditions. It was hoped that the resulting performance curves (corrosion rate vs. inhibitor concentration) could be reasonably extrapolated to the desired target corrosion rates. Evaluation of the Results Figures 6 and 7 show typical performance curves for J-55 and L-80 steels. In a double logarithmic plot the relationship between performance (inhibited average weight loss corrosion rate and/or final corrosion rate from iron counts) and inhibitor concentration turned out to be linear. Within experimental error this was also true for the steady-state corrosion rates. Within experimental error the steady-state corrosion rates (from iron counts) varied only little from the average weight loss rates as one would expect in
- 6) At this stage the judgement whether the most severe laboratory conditions also represented the most severe field conditions was obviously intuitive and solely based on qualitative prior experience.
') Inhibitor previously used in field at concentration of less than 100 ppm
I inhibited systems. The correlation equations, which are only shown for the average weight loss in Fig. 6 and 7, are a tool to calculate. the corrosion rate for any inhibitor concentration. For the purpose of developing the model, however, the inhibitor concentrations for the target corrosion rates of 1, 2, and 4 mpy were extrapolated manually from the graphs for the steady-state corrosion rate curves. The results are summarized in Table 4. Interpretation or the Results i An overview of Table 4 quickly shows that not all metals are inhibited equally. In particular the L-80 metallurgy proved less susceptible to corrosion inhibition, a fact which had also been observed consistently during the screening tests for all compounds tested. It is further observed that the differences in inhibition efficiency on different metals becomes more pronounced as the corrosion conditions become more severe. In order to obtain a better overview of the relationship between the severity of corrosion (combination of CO 2 partial pressure and velocity) response surface methodologya) was used. Specifically, as shown in Fig. 8 and 9, "iso-corrosion-inhibitor-concentration" lines were generated in a grid of CO2 partial pressure vs. rotating velocity of the cage. From Figure 8 one can conclude that for J-55 the major effect which controls the effective inhibitor concentration is the velocity (rpm) or by implication the shear stress. Only at higher shear stress does pressure begin to play a role in increasing the effective concentration. In comparison, L-80 (Fig. 9) is clearly more difficult to inhibit and pressure appears to have a more pronounced effect. The contours for N-80 are between those of J-55 and L-80. The mild steel, AISI-1018, performed in almost the same manner to the J-55, even though the PAIR electrodes were stationary. It is assumed that the rotating agitation of the liquid in the autoclave generates similar shear stress as experienced by the rotating cage. This point is important later when laboratory data will be compared to field data.
- 3. Localized Corrosion 5 As is well known, high fluid velocities in CO 2 environments cause flow induced localized corrosion, and it is also known that inhibition of FILC requires high inhibitor concentrations. As indicated in Appendix I, the maximum local penetration rates were routinely measured using a standard microscopic technique.
Figures 10 and 11 show the pitting rates as a function of the general weight loss corrosion rates for J-55 and L-80. The trend-lines for both metals are similar in that the pitting rate is not proportional to the general corrosion rate (in inhibited solutions). Of greater importance, however, is the fact that pitting inhibition on J-55 occurs below 2 mpy general corrosion rate, while for L-80 much lower corrosion rates (< Impy) are required for reliable inhibition of pitting. N-80, while more easily inhibited than L-80, has shown a greater tendency toward localized corrosion. This reversal in behavior may need further study relative to metallurgy and compositional parameters, but seems to be in general agreement with earlier studies. 3 An alternate way of evaluating the above data consists of a multiple linear regression analysis. For J-55, the following equation was obtained: 3 (Inhib. Conc.)i p = -117.1 + 0.105x(CO 2 partial pressure) + 0.228x(rpm) (2) s Softwar: JMP 3.2 Prof. Ed. 1997, SAS Institute, Inc., Cary, NC, USA a
This equation, which does not account for any non-linearity in the system, holds only within the experimental parameter range and can obviously not be extrapolated to milder corrosive conditions since negative inhibitor concentrations would result. Never the less, if the problem of the relationship of shear stress on the rotating cage and shear stress in the production tubing can be resolved, the above equation begins to offer a first approximation prediction of the inhibitor concentration which may have to be used under prevailing conditions in the field.
- 4. The Effect of the Water/Oil ratio on Corrosion Inhibition In addition to flowrate and CO 2 partial pressure, the water to oil ratio in the produced fluids was expected to be a major parameter in influencing the effective concentration. Table 5 summarizes the results. The general trend in the data indicates that an increasing water/oil ratio increases the corrosion rate at both velocity conditions with the exception of the two data points at 225 ppm inhibitor where the trend is reversed. The discrepancy is small and possibly, at the low corrosion rates, within experimental error. A linear regression analysis resulted in the following equation:
(corr. rate) 750p4 -55=1.4 + 0.00815x(rpm) + 0.480x(Water/Oil) - 0.0616x(Inhibitor) (3) which allows one to evaluate qualitatively the trends of the water/oil ratio and the effectiveness of the inhibitor as a function of velocity. Figure 12 shows how the corrosion rate increases with water/oil ratio. At the 100 ppm level of inhibitor, for example, increasing the water/oil ratio from 2 to 8 can move the corrosion of J-55 from non- pitting to a pitting situation, particularly at high rpm levels. Similarly, one can see from Figure 13 how the inhibitor concentration may have to be increased at a given water/oil ratio in order to move from a pitting situation (corr. rate >2 mpy) to one where no pitting occurs. Inhibitor C in these studies behaved differently from Inhibitor B discussed earlier on the basis of field data for this inhibitor. The differences in the two inhibitors is seen in their respective dispersibilities. Inhibitor B was essentially totally oil soluble and formulated only with a wetting agent to facilitate "filming" from the oil phase without resulting in water dispersibility. Inhibitor C on the other hand was formulated with the aid of dispersants. Since inhibitor dosage is always assessed on the basis of total produced fluids, high water dispersibility causes a reduction of the inhibitor concentration in the water as the water cut increases. Hence the observed effect for inhibitor C was not unexpected. DISCUSSION AND
SUMMARY
The purpose of a corrosion inhibitor program is to reduce failures, and the effective inhibitor concentration to do this must be capable of inhibiting corrosion under the most aggressive conditions. In order to achieve those objectives one must have 2 models. The first model must describe quantitatively the environmental and the flow conditions (including those pertaining in annular spaces and across upsets such as tubing collars), and the second model must relate the effective inhibitor concentration to the parameter values obtained from the first model (local shear stress, temperature, partial pressure and water/oil ratio).
I This study, an early attempt to quantify such relationships, has demonstrated a complex interplay between the effective inhibitor concentration (concentration to achieve a target corrosion rate) and the I systems parameters. Helpful in this endeavor was the fact that the inhibitor performance curve could easily be linearized in a log (corr. rate) vs. log (inhib. conc.) plot. Correlations were attempted between the effective inhibitor concentration and flow rate (rpm), CO 2 partial pressure, and the water/oil ratio. The correlations were expressed either by means of surface response methodology or regression equations. The latter have predictive value within the experimental parameter range. It was found that both increasing flow rate and pressure call for increased inhibitor concentration if target corrosion rates are to be achieved. In the case of inhibitor C, increased water/oil ratio also calls for increased inhibitor concentration. I However, it was also shown, in agreement with earlier studies, that the pressure relationship may be very I complex and that the water/oil ratio effect depends on the nature of the inhibitor. The oil soluble inhibitors A and B showed the opposite behavior from inhibitor C with respect to the oil/water ratio. The fact that it is possible to formulate inhibitors such that they become more effective as the water/oil ratio increases, an effect not heretofore recognized as such, should open up new avenues of both inhibitor synthesis as well as formulation. 3 The missing links between modeling corrosion inhibition in the lab and application in the field are twofold:
- verification of the lab results in the field o translation of the shear stress from the cage to the tubulars.
Both these-issues will be dealt with in the follow up publication. (Ref11) The above correlations were expressed in terms of steady state corrosion. Of greater interest, however, is localized corrosion, particular in CO 2 environments at high flow rates (FILC). Detailed and extensive pitting measurements indicated that under test conditions general corrosion rates have to be reduced to below a certain level to prevent localized corrosion as well. In the case of J-55, this level is about 2 mpy. In the case of L-80 and N-80 it is below 1 mpy. How this correlation will hold up in the field is yet to be shown, however, there has long been a feeling in the industry that general corrosion rates should be inhibited below 1 mpy (preferably 0.5 mpy) to prevent local attack. A final word about economics. From the above it becomes clear that corrosion inhibition in high pressure, high flow rate, high water cut systems becomes very expensive in terms of ¢/bbl of oil I produced unless either improved inhibitors are developed, or producers make an effort to combat corrosion in those areas most difficult to inhibit by other means, an effort which is well underway in many instances. I IV. References
- 1. J. T. Kochelek, Chemical Support for Carbon Dioxide Enhanced Oil Recovery Operations, 32 d Annual Southwestern Petroleum Short Course, 4/23/85, Proceedings, pp459 -467, 1985 3
- 2. R. H. Hausler, D. W. Stegmann, R. F. Stevens; The Methodology of Corrosion I
Inhibitor Development for CO 2 Systems, Corrosion 45 (10). 857, 1989
- 3. R1H. Hausler, D.W. Stegmann; Studies Relating to the Predictiveness of Corrosion Inhibitor Evaluations in Laboratory and Field Environments. SPE Production Engineering, August 1990, p 2 8 6
- 4. G. Schmitt, T. Simon, R. H. Hausler; CO 2 Erosion Corrosion and its Inhibition under Extreme Shear Stress, I. Development of Methodology, NACE Corrosion/90, paper 022, 1990
- 5. G. A. Weld, R. B. Stanberry, L. M. Ferguson, D. W. Jenkins, G. A. Myers, C. M. Maryan; Mississippi CO 2 Project - Corrosion Control, NACE Corrosion/86, papper 337, 1986
- 6. C. M. Maryan; Little Creek Start-Up Experiences, NACE Corrosionm/87, paper 443, 19987
- 7. G. Schmitt, W. Bruckhoff, K. Fissler, G. Blilmmel; Flow Loop vs. Rotating Probes - Correlation between Experimental Results and Service Applications; NACE Corrosion/90 Ls Vegas, 1990, paper 023; see also Materials Performance 30. (2) 85-90 1991
- 8. D. W. Stegmann, R. H. Hausler, C. 1. Cruz, H. Sutanto; Laboratory Studies on Flow Induced Localized Corrosion in CO 2/H 2S Environments, I. Development of Test Methodology, NACE Corrosio/90, paper 005, 1990
- 9. R. H. Hausler, Inhibierung der Erosions Korrosion, Werkstoffe und Korrosion,
- 44. 280, 1993.
- 10. R1H. Hausler, D.W. Stegmann, Laboratory Studies on Flow Induced Localized Corrosion in C02/H2 S Environments, IV. Assessment of the Kinetics of Corrosion Inhibition by Hydrogen Evolution Measurements. NACE Corrosion/9 1, paper 474, 1991 I1. T.G. Martin, M.T. Cox, R.H. Hausler, R.J. Dartez and J. C. Roberts.
Development of a Corrosion Inhibition Model: II Verification of Model by Continuous Downhole Corrosion Rate Measurements under Flowing Conditions with a Novel Tool. NACE, CORROSION/99, paper 99003.
I APPENDIX I I Test Protocol for Laboratory Testing in the HSACT Postle Diagnostic Inhibitor Evaluations I
- 1. Test Conditions o Autoclave: 4L I,
- Liquid Charge Brine Hydrocarbon')
1.83 L 1.00 L I
- Temperature 160.F o
- Pressure Gas Composition CO2 variable from 100, 425, 750, and1500 psi (at test temperature) 1000%
I 2
*
- H5S Stirring Rate Test Duration 500 ppm H 2S in C0 2 )
variable (500, 1000, and 1500rpm) 5 days U
- Synthetic Brine 3 NaCl 93.1 g/L CL 70,000 mg/L CaCI 2 .2H 2 0 22.0 g/L Ca 2++ 6,000 mg/L MgCI 2.6H 20 8.4 g/L Mg2++ 1,000 mg/L TDS 113,900 mg/L
- Coupons 4 PAIR electrodes Cage 2 x J-55, N-80, L,80, (Coupon area 30 cm 2 per coupon)
Electrodes 4 std PAIR electrodes (Electrode are 9 cm 2 per electrode) H. Coupon Preparation I o Sandblast coupons with 80 grit silicon carbide
- Degrease coupons by
- 1. Using an ultrasonic bath: wash coupons in 50/50 xylene/isopropanol mixture for 5 minutes
- 2. Rinse in isopropanol
,I o
- 3. Rinse in acetone
- 4. Dry with nitrogen Weigh to 0.1 mg I
III. Test Procedure
- Install coupons in rotating cage on stirring shaft
- Install PAIR electrodes on autoclave head I
- Add 1000 ml Isopar M to autoclave o Add 1830 ml of brine to autoclave
- Sparge fluids in autoclave with nitrogen for 30 minutes (prior to closing autoclave)
I o Inject inhibitor as needed o Add 200 ppm of bicarbonate based on brine volume (0.504 gm NaHCO 3) o Assemble and close-up autoclave U 1)Isopar MTN (a paraffinic hydrocarbon available from EXXON Corp.).
- 2) the H2 S concentration in the CO 2 charge gas was designed to result in about 150 ppm H2S in the gas under test I
conditions. This level was the maximum encountered in the field. The concentration in the gas under test conditions is only slightly dependent on total pressure with constant temperature.
- 3) Note: bicarbonate is added directly to the autoclave in order to avoid. precipitation of CaCO 3 I
I
o Begin data logging of PAIR corrosion data and other test parameters o Deoxygenate fluids be repeating the following steps 5 times:
- 1. Turn stirreron at 1500rpm
- 2. Charge nitrogen to 1000 psi
- 3. Mix fluids and gases for 3 minutes
- 4. Turn stirrer to 200 rpm
- 5. Slowly vent nitrogen to atmosphere o Set stirring rate to 1500 rpm
" Charge test gas to charging pressure 4) and verify equilibration (> 1 psi loss in 10 minutes) o Heat to test temperature (160 OF) o Sample test solution and stabilize with HCI for iron count measurements
- 1. When autoclave reaches test temperature
- 2. 2 hours after sample #1
- 3. every 24 hours (Note: these will be skipped over weekends)
- 4. 24 hrs before end of test
- 5. at end of test.
- Run test for total of 120 hrs
- Turn of heat
- Vent gases o Turn off stirrer
- Open autoclave o Remove and dry coupons o Disassemble and clean autoclave. The cleaning procedure will include the dissambly and cleaning of the inside of the magnetic stirrer. All residual iron carbonate is to be removed completely.
IV. Coupon Cleaning Procedure o Clean coupons in inhibited acid solution (standard procedure)
- Rinse and dry coupons
- Weigh to 0.1 mg
- Calculate weight loss and corrosion rate V. Evaluation of Results
- PAIR Probes I. Determine weight loss as above
- 2. Print out PAIR data
- 3. Integrate under PAIR/time curve 4.. Compare PAIR corrosion rate to weight loss
- Rotating Cage Coupons
- 1. Determine weight loss as above
- 2. Determine pit depth using microscope
- 3. Coupons will be photographed to maintain visual record of the corrosion damage
- Iron Counts
- 1. Measure ppm iron using HACH Ferrover method
- 2. Calculate corrosion rates based on differential iron concentrations to obtain corrosion kinetics
- 3. Compare corrosion rate from total iron count to weight loss corrosion rate 4)The charge pressure is lower than the target pressure at test temperature. A special model was used to determine the exact charge pressure (Ref. 9)
U Table 4 U I. Inhibitor Concentrations for 1 mpy Target Corrosion Rate I Pressure 750 Rpm 500 J-55 40 N-80 50 L-80 55 AISI-1018 25 I 425 1000 160 *150 180 120 100 100 500 1500 42 200 60 200 52 200 37 150 U 750 1500 339 400 841 400 I Ii. Inhibitor Concentrations for 2 mpy Target Corrosion Rate Pressure [_Rpm J-55 N-80 L-80 IAISI-1018 I 750 425 500 1000 34 140 40 130 46 170 28 80 U 100 500 30 54 46 30 100 750 1500 1500 150 248 170 309 170 646 100 251 I 1II. Inhibitor Concentrations for 4 mpy Target Corrosion Rate I Pressure 750 Rpm 500 3-55 24 N-80 28 L-80 32 AISI-1018 20 I 425 100 100 1000 500 1500 110 20 100 105 48 150 140 42 150 52 20 75 I 750 1500 180 240 487 160 I I I I I U U
Table 5 Final [Fe] Corrosion Rate Data for Different Metals as a Function of the Water/Oil Ratio, the Rotational Velocity of the Cage and the Inhibitor Concentration for Inhibitor C at 750 psi CO 2 Partial Pressure Water/Oil Inhibitor General Corrosion Rates for different Metals Run # Ratio Cone. ppm J-55 N-40 L-80 AISI-1018 A. Low Velocity (500 rm). 21 - 50 0.99 0.99 1.7 0.66 22 + 50 8.8 8.6 11.5 1.25 15 100 0.28 1.69 0.44 0.36 24 + 100 3.75 1.2 B. High Velocity (1500 rpm) 1 _2 150 4.9 11.67 51.4 2.1
-_+
_25 150 9.2 11..3 13 225 3.2 5 33 5.64 23 + 225 1.4 1 1.1 1.1 Oil/Water Ratio: - equals 1.83 + equals 9
Fliure-1: Inhibited Corrosion Rates as Function of Superficial Gas and Liquid Velocities from Little Creek Correlation of Coupon Data Inhibitor A, WateorOll = 117, Pressure 1800 psi 2.5 I,
-USL = 1 ft/sec USL = 1.5 ft/sec -A-USL -2 ft/sec 2.0 4--USL = 2.5 ftf/sec . ... ____,_-- --*--USL = 3 ft/sec E 1.5 0.-,ý-
a 1.0 Im mE 0 0. 0.5 0.0 0 10 20 30 40 50 60 Superficial Gas Velocity ft/sec W M - m my * -. MAN - -
m -- m m - Figure 2: Corrosion Rate as Function of Pressure and Water/Oil Ratio based on Little Creek Correlation of Coupon Data Inhibitor A, USL 2 ft/sec, USG 2 ftlsec 3.000 2.500 - -- -.-. E 0 (U 1.500 1.000 0 s0 100 150 200 Water/Oil Ratio
Figure 3: Inhibited Corrosion Rate as Function of C02 Pressure (High Speed Autoclave Test) 1000 -I I I I 03 25 ppm N 50 ppm M75 ppm >11 0.150 ppm CL 100 =&. ---- E 22250 ppm It 0
\
4 0 io
,*
0 1 ý1ý 50 ISO 450 1000 C02 Partial Pressure (psi) go 011111 m m
3/8 "Tubing Sub and Tubing 2 3/8 "x 3 1/2" change over 3 1/2" Collar 3.1/2" IPC joint approx 30 ft
% p.O niJaI y
ESP Cable Typical Completion of Producing Well in CO 2 Flood with full length Capillary Top ESP Pump Bottom ESP Pump Gas. Separator Pump Intake. Motor Protector ESP Motor Pe irforations approx 6150 ft Tail Pipe 1( )ttom of Motor approx. 6000 ft 5" Liner Ta il Pipe approx. 100 ft I Perforations
Evaluation of Inhibitor C at Different Concentrations and Test Conditions in the HSAT [Water/Hcbn Ratio = 1800/1000 (9:5)] Velocity (rpm) Run Conc. G 1500-16 100 18 225 Run Conc 1000-17 100 19 225 500- Run Conc. Q Run Conc.
.14 100 15 100 20 50 21 50 100 425 750 Pressure (psi) m m m m m m m m - - - ~ m - m
Fiaure 6: Inhibited Corrosion Rates of J-55 at 750 psi and 1500 rpm Inhibitor C 2
*1.6 1.2 0
0.8 0.4 0 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 log concentration (ppm)-
Finure 7: Inhibited Corrosion Rates of L-80 at 750 psi 1500 rpm Inhibitor C 2.5
- 1.5 1.
0 1.8 2 2.2 2.4 2.6 2.8 3 log concentration (ppm) IM i u, mm m * - 111811111 - f M
M M imM M M - -,M - MM - M i Figure 8: Contour Plot for J-55 Inhibitor Concentrations Necessary to Achieve I mpy Based on Final Corrosion Rates from Differential Iron Counts 0 200
. Figure 9: Contour Plot for L-80 Inhibitor Concentrations Necessary to Achieve I mpy based on Final Corrosion Rates from Differential Iron Counts 0 260 4w0 premr (p) m M M M M M m M ý m - mM M M M M
-Figure m10 J - at v Cri -ate Figure 10: J-55 Pitting, rate vs. Corrosion Rate all data 1600 -----
--- -- ------
1200 CL 800 0~ 400 8mdfn 10e,~ 0 0 I 2 3 4 5 6 7 8 9 10 Corrosion Rate (mpy)
Figure 11: L-80 Pitting Rates vs. Corrosion Rates all data 3500 3000 2500 E 2000 1500 1000 5oo 0 0 20 40 60 80 1.20 100 140 IGO 180 200 General Corroalon Rate (mpy) m m m m m m m m - m I m m m m m m
n- m u m nu nuuoL_m mmm nmm- nn m- nun-Figure 12: Corrosion Rate vs. Velocity at 750 psi CO 2 Pressure 100 ppm InhibitorC 12 10 8 6
.0 0, 4 2
400 600 800 1000 1200 1400 1600 rpm
FiIgure 13: Effect of Inhibitor Concentration Inhibitor C, 750 psi C02, Water/Oil Ratio =2 l0 100pp too 0 0 400 800 1200 1 00 rpm I ml m m im - m - -mm m m m -
APPLICANT'S EXHIBIT 59 Development of a Corrosion Inhibition Model H. Verification of Model by Continuous Corrosion Rate Measurements Under flowing Conditions with a Novel Downhole Too] T. G. Martin Mobil E&P US, Inc., 12450 Greenspoint Drive Houston, TX 77060-1991 M. T. Cox Mobil E&P US, Inc., Route 21, Box 130 Guymon, OK 73942 R. H. Hausler Corro-Consulta 7804 Pencross Lane Dallas, TX 75248 R. J. Dartez, P. Pratt Nova Technologies Corp. 3501 Hwy 90E Broussard, LA 70518 J. C. Roberts Baker Petrolite Rte. 2 Box 272 Turpin, OK 73950 ABSTRACT A novel downhole corrosion monitoring system was used to monitor corrosion rates, and verify corrosion inhibitor effectiveness in the production tubing of a CO 2 flood in the Oklahoma panhandle. The monitoring system was placed in the first tubing joint immediately above the electrical Copyright 01999 by NACE International. Requests for permission to publish this manuscript inany form, inpart or inwhole must be made in writing.to NACE International. Conferences, Division, P.O. Box 218340, Houston, Texas 77218-8340. The material presented and the views expressed in this paper are solely those of the author(s) and are not necessarily endorsed by the Association. Printed in the U.S.A.
I submersible pump. This location was deemed most corrosive, and therefore requiring the highest inhibitor concentration, due to high C0 2 partial pressure, the elevated temperature, and the extremely turbulent flow. Laboratory evaluations had indicated the approximate effective inhibitor concentration required to attain the desired target corrosion rate under similar environmental and turbulence conditions. The complex problem of translating laboratory flow (high speed autoclave test) to field I conditions was attempted empirically using established correlation for the rotating cylinder and tubular flow. Keywords: target corrosion rate, effective inhibitor concentration, shear stress, high speed autoclave test, CO 2 partial pressure, corrosion inhibition modeling, response surface methodology, INTRODUCTION The Postle Field, situated in the Oklahoma Panhandle, north of the city of Guymon, has been in operation since 1958. The field produces form the Morrow Sand at a depth of 6,100 ft and was placed on CO 2 flood in 1995. The field differs from Mobil's other CO2 flood operations in that it is a sandstone formation, while most of Mobil's West Texas CO2 flood operations to date have been in I limestones. Initial corrosion control treatment for the Postle followed the program which had been developed for I the West Texas limestone floods with a weekly batch treatment into the annulus at a rate of 20 to 25 ppm for inhibitor D1). The treatment procedure was changed from batch treatment (inhibitor with overflush) to continuous when CO 2 breakthrough occurred, but without changing the treatment rate. I Shortly after CO 2 breakthrough occurred the field began to require more frequent well workovers. Severe corrosion on both internal and external surfaces of the production tubing was found with corrosion rates, in some instances being in excess of 300 mpy. Field personnel observed that high corrosion rates appeared to be associated only with wells where large quantities of CO2 would be produced though the corrosion pattern was complex and initially difficult to predict. The Postle CO2 flood, being a sandstone formation, is inherently more corrosive than "limestone floods" mainly because of the low bicarbonate concentration (200ppm) in the produced water from sandstone formations (vs. 2000 ppm bicarbonate from limestone formations), and the attendant lower U pH that results in the presence of CO 2. Table 1 shows the influence of bicarbonate ion on the pH of a CO2 containing water. The difference between 200 and 2000ppm bicarbonate in the produced brine is one between the formation of an insoluble, protective iron carbonate film on the surface of the metal at higher pH and the absence I thereof at the lower pH. I ') Some performance data for this inhibitor are given in Ref.4i I
Table I pH in Produced water as Function of CO 2 Partial Pressure and Bicarbonate concentration (Temperature 160 'F, Ref. 1). Pc02 HCO psi 200 ppm 2000 ppm 100 4.87 5.87 500 4.18 5.17 1000 3.89 4.87 It has also been shown that commercial inhibitors differ in their ability to inhibit at high and low pH's (Ref 2). In addition, higher flow rates and higher water cuts greatly aggravate corrosion at the lower pH due to increased mass transfer of the corrosion products away from the metal surface, while in the intermediate range, where protective scales might just form, high flow intensity (turbulence) leads to localized corrosion and so called "mesa" attack. The effective inhibitor concentration (EIC), i.e., the concentration required in the field to reach a low target corrosion rate at which localized attack is minimized, depends on environmental parameters in a complex manner. An attempt is made in Table 2 to summarize these relationships qualitatively. Table 2 Direction of Effect on required Effect of Change Inhibitor Concentration Decreasing pH on Corrosion Scale Formation + Increasing Flow on Corrosion Scale Formation + Increasing Pressure on t Corrosion Scale Formation +
- Increasing Water/Oil Ratio on Corrosion Scale Formation 4 -*
As indicated earlier, a decreasing pH increases corrosion while preventing the growth of protective scales with the result that higher EIC's are needed for adequate protection. The flow rate (and by implication the flow intensity at flow upsets) similarly results in a requirement for higher EIC. These relationships have been demonstrated quantitatively in previous publications (Ref. 2,3,4). The pressure effect is peculiar in that there appears to be a maximum in the Corr.rate / pressure curve for different inhibitor concentrations. This was first demonstrated in studies related to another CO 2 sandstone flood (5). Recently similar studies were performed with Inhibitor C in use at the Postle field. Figure 1 indicates by means of iso-corrosion lines presented as contours in the Pc02 vs. rpm (velocity) grid, that at certain velocities, and for certain metals 2) the pressure effect might have a maximum at certain inhibitor concentrations. These data also indicate that the usage rate of 20 ppm inhibitor in the field very likely was not enough and that under certain high velocity conditions even 100 ppm would not be sufficient. It was against this background that an attempt was made to establish a model for the effective inhibitor concentration as a function of CO 2 partial pressure, rpm (flow rate), and the water/oil ratio (Ref. 4). The data had indicated that under the most corrosive conditions in the laboratory high concentrations of inlibitor were needed, again depending on the metallurgy. The opportunity then existed to verify the -laboratory data in the field by direct real time downhole corrosion measurements. DESIGN OF FIELD TEST I
- 1. Objectives The objectives of the field test were formulated as follows:
o Determine the effectiveness of the corrosion inhibitor in terms of degree of protection and EIC. o Confirm the corrosion inhibition model in a limited number of field tests under the most severe corrosion conditions possible.
- Focus on inhibition of tubing corrosion Determine the effectiveness of the inhibitor treatment for different continuous injection modes (various lengths of capillary)
The focus was on tubing corrosion initially because the tubing intervals were where the lowest corrosion inhibitor concentrations were anticipated. Since the corrosion inhibitor dosage was determined on the basis of the total volume of produced fluids, the inhibitor concentration in the annular space was expected to be many times higher in proportion to the overflush relative to the total volume produced. If only 5 percent of the total fluids were circulated, the concentration in the 3 annulus would be 20 times higher than anticipated in the tubing. It could, therefore, be assumed that if the tubing id was inhibited, the casing space would be inhibited as well, even if due to high gas production rate the flow intensity in the annulus was even higher, provided the inhibitor - overflush mixture was not blown out of the casing space because the critical gas velocity had been exceeded3).
- 2) Thismaximum appeared to be present at about 425 psi and 1000 rpm only for J-55 metal. For N-80 and L-80 the maximum might have been shifted t6 higher CO 2 pressures while the corrosion rates at 100 ppm inhibitor concentration were considerably higher as well.
Thewcritical gas velocity is the velocity at'which liquid is gas lifted out of the casing space. I
- 2. The Tool A new tool, the downhole corrosion monitoring system had recently become available from NOVA Corporation4 ). The system had been extensively field tested by ARCO Alaska in 1997 (Ref. 6). The corrosion measuring device consists of a standard, cylindrical, electrical resistance probe attached to a power supply, and the electronic measuring and data storage circuitry. The assembly is packaged into a 1.25 inch x 54 inch stainless steel tube which can be placed by special wireline tools at any depth in the production tubing (Figure 2). Because the flow channel was reduced due to the placement of the tool, the first joint above the pump was replaced with a 13% Cr steel joint. This prevented corrosion damage which might otherwise occur to carbon steel in the unusually aggressive conditions found in Postle wells.
- 3. The Test Wells A typical completion scheme of Postle wells is shown in Figure 3. Only few wells were equipped with full length inhibitor injection capillaries. Most wells only had a 40 ft stinger capillary to assure that, for continuous inhibitor injection with overflush, the turbulent zone in the annulus near the well head was bypassed, thereby preventing fluids injected into the annulus from being entrained in the gas. A special feature of the downhole completion is the gas separator, placed between the pump intake and the pump itself. It is estimated that the free gas entering the pump intake was separated from the liquids with about 80% efficiency. Measurements actually indicated that almost all free gas was produced out the annulus, while only dissolved gas in equilibrium with the downhole pressure (at the pump intake) was carried with the liquid. The pump intake pressure was controlled by the fluid level above the pump and the flowline pressure on the surface. In those cases where the wells were equipped with only a 40 R capillary, the fluids below the pump intake could not be inhibited.
Carbon steel equipment below that point was therefore subject to corrosion.
- 4. Selection of the Test Wells The cost of the test, consisting of the rental of the equipment and three wireline jobs (see below),
precluded a broad based test matrix. Therefore, the verification of the inhibitor model was to occur only under the most severe conditions. The criteria for the selection of the test wells were as follows:
- Low level of bicarbonate in the produced water (< 200 ppm)
- High gas rate (>500 MSCFD)
- High liquid flow rates (> 1000 bbl/d)
- Low and high water/oil ratio e Versatility for inhibitor injection mode The last criterion was intended for verification of models which helped assessing the critical gas velocity above which liquids are gas lifted out of the casing space. Because of workovers, temporary shut-ins and miscellaneous failures the selection was restricted to a small number of wells and kept changing.
- 4) NOVA Technology Corporation, 3501 Highway 90 East, Broussard, LA, 70518, formerly a Division of Rohrbach Cosasco Systems, Inc.
- 5. The Structure of the Downhole Tests The corrosion monitoring tool was located in the 13% Cr-steel joint immediately above the pump to capture the effects of the high turbulence of the fluids exiting the pump and the maximum downhole temperature expected to be around 150 to 160 OF. Since a decision had been made to determine the effectiveness of the inhibitor it was necessary to establish the uninhibited corrosion rate prior to inhibitor injection. Therefore an elaborate procedure was worked out to assure removal of all residual inhibitor from the wellbore prior to running the tool into the well. The uninhibited corrosion was monitored for 5 days under normal production conditions in order to establish the steady state uninhibited corrosion rate. Subsequently, inhibitor injection was initiated at the highest rate for about 1 day. The probe was then pulled and replaced with a fresh one. Subsequently it was intended to change the inhibitor injection rate from 300 ppm in 4 steps down to 50 ppm running each concentration for 5 to 7 days.
The liquid flow line of the test well was equipped with a PAIRTN (LPR) meter, an electrical resistance probe, and, where possible, a corrosion coupon. Both meters were continuously reading instruments with data storage capabilities. The production rates, producing conditions (fluid level, tubing and casing FWHP and FWHT), inhibitor injection rates water analyses and iron counts were recorded as frequently as practical. The downhole ER-probes were weighed and calipered before and after the test to compare the instrumental read-out with the average weight loss corrosion rate and the appropriate dimensional changes. Two options existed for the choice of the ER-probes, 10 mil and 20 mil wall thickness with a useful life of 5 and 10 mils respectively. Based on sensitivity considerations it was desirable to use the thin-walled probes for the inhibited test periods. The thick-walled probe, however, had to be used for the uninhibited period because potential corrosion rates of the order of 500 mpy were anticipated, in which case the useful life of the thin probe would have been exceeded in 5 days. These requirements necessitated replacement of the thick-walled probe after the blank test period in order to avoid going into the inhibited test periods with a partially, or fully, used up probe. As it turned out, this precaution was not necessary, because the observed corrosion rates were lower than anticipated. RESULTS AND DISCUSSION
- 1. PUMU 9-6 l.The Field Test The first test well was PUMU-9-6. The production was about 200 bbl/d oil, 250 bbl/d brine and 182 Mscfd gas. In this respect, the well did not correspond to the selection criteria, but it did have both a full length and a 40 ft capillary and water analyses prior to the test showed low bicarbonate content. Figure 4 shows the test sequence in the form of a timeline. Prior to the installation of the downhole probe the procedure of removing all inhibitor from the well was executed. The uninhibited test period lasted 3 I
days. The thick walled downhole probe used in the blank run was then replaced with a thin walled one, and the inhibitor injection rate was reduced from 300 ppm to 200 ppm because neither the surface nor the downhole ER probes had shown any corrosion toward the end of the blank test period. When it appeared that still no corrosion was observed during the next few days, the inhibitor concentration was reduced to 20 to 25 ppm and left there for the next 25 days. At this point the test was terminated. Figure 5 shows the response of the downhole ER probe along with the temperature record. The temperature of the fluids immediately at the exit from the pump was about 176 %F(80 °C) and increased gradually toward 180 OF during the 4 day run. This was considerably higher than what had been expected (140 to 150 OF for the formation temperature) and included the heat generated by the downhole pump motor and the pump itself (friction). The ER trace goes through an initial minimum which has never been fully explained. Presumably both the battery and the electronic circuitry go through a period of adjustment to the higher downhole temperature, du-ing which time the battery voltage increases and the circuits reach a steady state. After this initial minimum, a period of high corrosion (117 mpy) is followed by rapid passivation (presumably scale formation and/or natural inhibition). Figure 6 shows a complete evaluation of the ER probe response for the first test period. An initial corrosion rate of 117 mpy is oberved for about a day. Afterwards, a full day prior to the injection of the inhibitor, passivation occurs and the corrosion rate decreases to about 1.5 mpy. Figure 7 shows the surface ER probe trace during the same period. Unfortunately some data for this period were lost. Nevertheless, there is a good indication that the downhole passivation process is mirrored in the surface probe. The main result from this period is that for some time the downhole corrosion was 117 mpy. (This compares favorably with subsequent data - see below). The corrosion rate on the surface for this short period was only 34 mpy. Passivation occurred in both instances. After the new thin walled ER probehad been run into the well the inhibitor concentration was reduced to 200 ppm for a few days, and when it became obvious from the surface probes that corrosion was not increasing, the concentration was further reduced to 20 to 25 ppm. There was never any indication that the corrosion rate, downhole or on the surface was any larger than the detection limits of the instruments (0.1 mpy) for the period of observation.
- 2. Discussion This test showed that carbon steel corrosion was inhibited naturally by the produced fluids. The weight loss corrosion rate obtained from the downhole ER probe matched the integral of the electronic readout.
Extensive calipering showed no measurable loss in the diameter. The downhole ER probe was judged very reliable. Table 3 indicates that the production rates held steady over the entire test period. The answer for the absence of corrosion in this well under the prevailing conditions, therefore, must be found in the chemistry of the produced fluids. Table 4 lists water analyses from shortly before, during and after the test. It appears that there has been a shift of the bicarbonate concentration causing a shift in pH from 4.3 to 4.9, i.e. from a non-scaling (FeCO 3) to a scaling condition. The iron carbonate saturation pH is estimated at about pH 4.4 to 4.5 at 180 OF (Ref. 1). Additionally, the produced oil proved to be paraffimic in nature (as judged from paraffin deposits on the surface probes). It is, therefore, concluded that the combination of relatively low production rates, higher than expected downhole temperature, an unexpected shift in pH favoring iron carbonate film formation, the low water/oil ratio, and the paraffinic nature of the oil all worked together to generate a non corrosive condition.
- 2. HMAU 54 1.The Field Test The second test well was HMAU-54 with an average production of 2500 to 2800 bbl/D brine, 140 to 150 bbl/d oil and 230 to 250 Mscfd gas. The CO 2 content in the gas was of the order of 80% and the fluid level was consistently high between 1500 and 2000 ft above the pump. This well was also equipped with a full length capillary (see Fig. 3) and a 13% Cr-steel joint had just been installed immediately above the pump where the tool was to be placed. Prior to running the probe into the well, all remaining inhibitor from the previous treatment was flushed out of the casing and tubing. Table 5 shows water analyses from before and during test. The bicarbonate levels appeared to be quite low. The test sequence and timeline is shown in Figure 8.
Figure 9 shows the downhole ER probe response during the uninhibited (blank) period. The corrosion rate starts out at 120 mpy (vs. 117 mpy on the PUMU 9-6 for the first hour), and reaches a steady state of 82 mpy after I day. The inhibitor injection was initiated at 265 ppm alter 4.5 days. The delay of the probe response is due exactly to the time it took for the inhibitor to fully displace the xylene in the capillary. The inert solvent had been used to purge all inhibitor from the capillary and was left there during the blank period. As soon as the inhibitor reached the pump intake, the corrosion rate decreased to a very low level of 2.2 mpy. The downhole temperature during the blank run was 154 OF and held steady during the entire period. Figure 10 shows the response of the surface ER probe. The initial corrosion rate decreased from 90 mpy to 67 mpy during the first 5 days. After the inhibitor reached the surface a corrosion rate of 4.7 established. The blank test was terminated before steady states had been established, either downhole nor on the surface. The surface probe mirrored the downhole trends, albeit at a somewhat lower level. Prior to starting the inhibited, period of this test, new probes were installed in both locations. Figure 11 shows the record of the downhole ER probe during the inhibited period. It took a few hours for the inhibited corrosion rate to establish itself on the new probe. The steady state leveled out at 1.3 mpy. During the transient a corrosion rate of 17 mpy was extrapolated from the data. (Not enough points could be recorded to extrapolate a good number from the somewhat noisy data). After the injection rate was changed from the 265 ppm to 150 ppm the corrosion rate increased from 1.3 mpy to 4.1 mpy over a very short period of time. (The "film" life was only 3 to 5 hours at best). The same behavior is seen on the new ER probe on the surface as shown in Figure 12. It took a few hours for the corrosion probe to become fully inhibited. At 265 ppm the corrosion rate is practically zero, or so low (>1 mpy) that no meaningful value could be extracted from the 48 hour record (the statistical trendof the data is negative). At 150 ppm a corrosion rate of 1.2 mpy could be determined from the 7 day record. After the inhibited period had been running for about 10.5 days an upset occurred. The surface flowline was accidentally shut in such that the pump deadheaded for a period of time. During this period and before the pump shut down, the fluid temperature reached 350 OF (see Fig. 11). The corrosion rate increased to about 15 mpy, but when the temperature had receded to 149 OF, the corrosion rate stabilized at a level of about 0.5 mpy under stagnant conditions. Whether the low corrosion rate is due to passivation or inhibition is impossible to determine. However, the temperature excursion did not cause any damage, which was confirmed by subsequent workover. I I
The behavior of the LPR probe is shown in Figure 13. During the uninhibited period a corrosion rate of 2.5 mpy can be averaged out from the extremely noisy data with some confidence. However, during the inhibited period, the measurements were practically zero. All fluctuations are due to the electronic bit-noise off zero.
- 2. Discussion Table 6 summarizes the results from the second test. The downhole corrosion protection at 265 ppm was 98.4 % and 95 % at 150 ppm inhibitor concentration. This is probably for the first time that such high degrees of protection have been shown in the field under downhole conditons for any corrosion inhibitor. The degrees of protection derived from the surface data are even better, 99.4 %
and 98.2% for 265 and 150 ppm, respectively. This points to the important fact, long suspected but never quantitatively demonstrated, that surface corrosion rate measurements do not reflect the real downhole situation. Qualifying comments need, however, be made. While inhibition may have been favored by the lower temperature on the surface, suspected turbulent conditions may have tempered this effect. It has been calculated that gas break-out from the liquid in the tubing occurred at about 2000 At from the surface. The mixture velocity was thereby accelerated from 9 to 16.7 ft/sec. The surface probe was therefore exposed to a much higher flow rate and much greater turbulence than the downhole probe. In the absence of such gas break-out, inhibition on the surface might have been even better. The LPR probe response was many times lower than the ER responses even though the water/oil ratio was from 12 to 14, a water cut usually thought to be very favorable to LPR measurements. Two effects may have been responsible for this. It had already been observed in extensive autoclave corrosion measurements (Ref. 4) that with Inhibitor C the weight lss/LPR ratios were quite high. They generally increased with inhibitor concentration and could be as high as 20 with an average around 5 to 10. This phenomenon depends on the nature of the inhibitor and of course the water cut. On the other hand, the high gas volume commingled with the fluids on the surface (about 45 vol% gas and 55 voi% liquids) no doubt was also responsible for the low LPR readings as well as the extreme noise observed in the data. All this points to the need for caution in interpreting surface corrosion measurements. The difference between an instrumental reading of 4 mpy (general corrosion rate) and 1 mpy is not trivial in view of possible localized corrosion (pitting factor). It had been shown in the previous paper, by means of autoclave testing and extensive pit measurements, that localized attack occurs under partially inhibited conditions when corrosion rates exceed 1 mpy. A surface corrosion rate reading of 1 mpy ( with concomitant downhole corrosion of 4 mpy) is no assurance that pitting or localized attack (FILC) has been inhibited -downhole. The customary pitting factor of 20 often accepted in the oil field as relating general corrosion to localized corrosion seems to confirm these conclusions. Iron counts had been measured occasionally during these tests. The average tubing corrosion rates derived therefrom for bare tubing are independent of the presence of inhibitor or its concentration. The tubing furthermore had been internally plastic coated. All this confirms that soluble iron was produced with the brine from the formation and that iron count measurements therefore would be useless for the purpose of monitoring inhibitor effectiveness. In summary it can be concluded that this new corrosion monitoring system is an excellent tool with which one can begin to resolve a number of open questions related to monitoring of corrosion and corrosion inhibition. Differences between downhole and surface corrosion rates must be interpreted carefully and some commonly used tools for measuring corrosion rates at surface may not be entirely reliable. At the least it has been possible to put in perspective the reliability of some of the more
common oil field practices. More importantly, it has been shown that the degree of inhibition in the field under realistic conditions is much higher than commonly believed. The factors which control the degree of inhibition will be discussed below. INHIBITION MODEL The objective of modeling corrosion inhibition is to extract from the accumulated laboratory (Ref. 4) and the newly acquired field data a means to predict the effective corrosion inhibitor concentration l (EIC) which would result in a predetermined (target) corrosion rate under field conditions. Since almost every producing well in a CO 2 flood exhibits different producing conditions the EIC for each well is different. A corrosion inhibition model is, therefore a prerequisite for optimizing the inhibitor program cost field wide and by implication minimizing the maintenance expenditures. I The modeling process begins by setting a target corrosion rate, determined by the life expectancy of i the field, the anticipated pitting factor, the acceptable treatment cost, or any other operational parameter which might be considered a priority. The target corrosion rate is, therefore, subject to a decision by the operator of the field. Once the target corrosion rate has been established, the inhibitor performance curves are used to define the EIC's for different pressure and velocity I conditions. The methodology has been described in detail in the previous publication (Ref. 4). From an array of EIC's defined for different CO 2 partial pressures and different flow conditions, contour plots are generated for constant inhibitor concentration. These curves are generated from laboratory I data obtained by means of the high speed autoclave test. The velocity vector is therefore expressed in rpm of the rotating cage. In order to verify this laboratory developed model and give it practical utility, one needs to translate the flow intensity of laboratory conditions to those prevailing in the I field. To achieve this task explicitly is a real challenge since the rotating cage used to generate the laboratory data is not really a rotating cylinder, and the downhole ER-probe used to generate the field data is not necessarily exposed to the same flow intensity as the tubing walls in which it resides I during the test. In the face of these difficulties, and the absence of an abundance of data, only a qualitative attempt can be made at the comparison of the two data sets. The approach, as intuitive as it might be, may stimulate further efforts in this direction, and perhaps begin to put in perspective the I many misleading and erroneous claims being made about the art of chemical corrosion inhibition. In analogy to Efird's work (Ref. 7) the wall (or surface) shear stress was used to link the laboratory results with the field data. The overall methodology was as follows: 1
" Determine the shear stress of the rotating cage (,) as function of rotating speed of the cage (rpmac).
- Determine the shear stress at the downhole tool in terms of the tubing shear stress (rTtg)
" From the correlation of (rpmRc) = f(T,) determine the "apparent equivalent" (rpmfb) using (T*t) " Enter the apparent equivalent shear stress into the contour plot for the effective inhibitor concentration. " The difference between the EIC extrapolated for (rpmn,) and the (rpmxc) corresponding to the concentration used in the field will yield an empirical factor by means of which (rpme,) is to be adjusted in order to make the contour plot (laboratory data) predictive in terms of the I
I
concentration which needs to be used in the field in order to achieve the target corrosion rate for which. the contour plot has, been defined. The contour plot is used to facilitate the understanding of the methodology. The same procedure can be formulated analytically as will be shown later. The shear stress calculations for the rotating cage were based on a discussion by Silvermann (Ref 8, 9). The results are shown in Figure 14 along with an empirical' correlation equation which was extracted solely for ease of future calculations. The tubing shear stress:was calculated on the basis of Efirds discussion (7). For the conditions found in HMAU 54 (tubing diameter 2 3/8 inch, brine production 2800 bbl/d, oil production 150 bbl/d, temperature 150 OF) the tubing shear stress (Ttb) was found to be 13 N/m2 . This results in an apparent equivalent tubing rpm (rpmtg) as extrapolated from Fig. 14 of 706. The CO2 partial pressure in the fluids above the pump was estimated at 550 psi. Referring to Figure 15, the contour plot for I mpy, one can see that the apparent equivalent tubing rpm would, at 550 psi CO 2, predict an EIC of about 90 ppm. From the field data one knows however, that the target corrosion rate of (about) 1 mpy was attained with 265 ppm which corresponds to 1411 rpm. The relationship between (rpmt,,) and (rpmac) therefore is almost exactly a factor of 2. From a practical point of view this means that if the apparent equivalent tubing rpm is determined from the actual tubing shear stress and multiplied by a factor of two, one can determine the effective inhibitor concentration from the contour plot for any pair of production rate and CO 2 partial pressure. The procedure is confirmed by the second field data point from HMAU 54. Figure 16 shows the contour plot for 4 mpy. The production conditions are the same as above. Extrapolation of the EIS for the apparent equivalent rpm of 706 results in an apparent EIC of 60 ppm. However, 4 mpy was obtained in the field with 150 ppm corresponding to a cage rpm of 1420. The factor of two is thereby confirmed. Efird (7) has shown that at equal shear stress the corrosion rate obtained on a rotating cylinder is about two to three times less than that observed in tubular flow. Equal corrosion rate would therefore require a higher shear stress (higher rpm) on the rotating cylinder by about the same factor as observed above. Since a higher corrosivity requires more inhibitor to achieve the same target corrosion rate 5), and since a lower tubular shear stress represents a higher corrosivity than equal rotating cylinder shear stress, it is clear that both the inhibitor concentration as well as the cylinder rpm would have to be increased to match the field conditions. It appears, therefore, that the data presented here and their interpretaion, albeit dealing with corrosion inhibition rather than corrosion itself, find confirmation in the work presented by Efird. In order to develop the model quantitatively the data for the EIC's as a function of rpm and CO 2 partial pressure were expressed in diagnostic equations rather than contour plots. The equations were obtained by means of a multiple linear regression using JMPTM software6). The equations for I mpy and 4 mpy are: E/C~w9*J- -117.1 +0.105. Pco +0.2285*rpm and F,/C4.py _5= -62.4+ 0.0692& Pcg + 0.121 e rpm
- 5) It has been shown time and again that the more corrosive a system the more inhibitor is needed for equal protection in terms of the target corrosion rate (see also for example Ref. 10).
.6) jMpTM is statistical softWare from SAS Institute Inc., Cary, NC.
respectively. In analogy to the above methodology one first determines the actual tubing shear stress which is then converted to the apparent equivalent tubing rpm. This latter number is then multiplied by two and inserted inthe above equations in order toarrive at the EIC associated with the particular production conditions. U This model for corrosion inhibition clearly has limited applicability. While the contour plots do I account for the.non-linearity observed in the pressure effect, the correlation equations do not. The effect of this on the predicted EIC is small, butmust be kept in mind. The correlation equations as well as the contour plots strictly have validity only within the experimental parameter range. More 3 important, however, is the fact that the results presented here are both field- and inhibitor specific. The same inhibitor in high bicarbonate brine would result in lower EIC values, while different inhibitors in the same field can vary dramatically in their respective EIC requirements. Superimposed on this are the different responses obtained from different metals. It has been pointed out that L-80 i under high flow intensity requires much higher EIC's. This highlights the notion, often glossed over in practice, that for optimum inhibitor applications field specific evaluation under realistic conditions is unavoidable. On the other hand, the model does show a way to define the EIC specifically for each well in a field and thereby opens a way toward economic optimization of inhibitor treatments, and selection of corrosion mitigation scheme on more meaningful cost data.
SUMMARY
I Downhole corrosion rate measurements were made with a new tool by NOVA Technology i Corporation which is based on electrical resistance technology. The tool was used in two wells to verify the effectiveness of the corrosion inhibitor used field wide. In the first test well, PUMU 9-6, it was found that the inherent uninhibited corrosion rate might be of the order of 120 mpy. This rate was sustained only for a short period of time before passivation set in. Passivation is due to a combination of factors: mild flow conditions, high temperature, high bicarbonate concentration in the brine, and a low water to oil ratio. The steady state corrosion rate was essentially zero, a fact which was also attributed to the natural corrosion inhibiting properties of the produced oil. The second test was performed under more severe flow conditions, a very high water cut, and higher CO2 partial pressure. Realistic steady state blank corrosion rates were measured downhole and on the surface. Upon adding inhibitor at 265 and 150 ppm degrees of inhibition of 98.4% and 95%, respectively, downhole, and 99.4 and 98.2 %, respectively, on the surface were achieved. Such high
- degrees of inhibition were previously thought to be unrealistic under field conditions. It was also observed that surface corrosion measurements consistently reflect lower aggressiveness than prevails downhole and therefore, higher inhibitor effectiveness. The importance of this is seen in the fact that in order to prevent failures by pitting and/or flow induced localized corrosion, the general corrosion has to be inhibited below a certain level. A surface corrosion rate of 1 mpy which may correspond to a downhole rate of 4 mpy is no guarantee that localized downhole corrosion has been inhibited.
An attempt was made to model the field results within the framework of the laboratory data using the wall shear stress to translate the field flow conditions to the laboratory flow conditions generated by rotating cage in the high speed autoclave test. Because the calculated shear stress for the cage is I I
higher thin the calculated shear itr" ft r tubing at equal cotrosion rates, the tubing shear stress (or in the model the apparent equivalent tubing rpm) need to be adjusted upwards in order to estimate the EIC from laboratory data. The proportionality factor is about two and is confirmed by the work of Efird. The model expresses the general experimental findings that the EIC is a function of partial pressure, *flow intensity and to a lesser extent the water to oil ratio. It must be stressed, however, that the model is relative. While qualitatively such relationships have been shown for a large number of inhibitors, they differ quantitatively, and depend not only on the inhibitor, but also on the metal to be inhibited and the environment, notably the pH of the brine. While the industry would like to have one simple correlation applicable to all types of carbon steel, all inhibitors and a wide range of environmental conditions, reality defeats such an approach. The notion that oil wells should be treated with 20 or 30 ppm of inhibitor regardless of the nature of the environment and the producing condition is unrealistic. This notion may have been the result of simplified inexpensive laboratory testing procedures and has by now been thoroughly discredited in many parts of the world. Rather, .,for aggressive conditions as they are found at Postle corrosion inhibitors must be qualified by field 'specific evaluation. The model, however, can predict the EIC for individual wells in a field. This has been confirmed by in situ, downhole corrosion rate measurements in real time. The novel downhole corrosion monitor has therefore been a big step forward toward in improving understanding of these problems. REFERENCES
- 1. C. DeWaard, U. Lotz, Prediction of CO 2 Corrosion of Carbon Steel, in Predicting CO 2 Corrosion in the Oil and Gas Industry, European Federation of Corrosion Publications, No. 13, published by the Institute of Materials, p30, 1994 2 R. H. ILausler, D. W. Stegmann, R. F. Stevens, The Methodology of Corrosion Inhibitor Development for CO 2 Systems, Corrosion 45 (10), 857, 1989 3 R. IL Hausler, D.W. Stegmann, Studies relating to the Predictiveness of Corrosion inhibitor Evaluations in Laboratory and Field Environments, SPE Production Engineering, August 1990,
- p. 286 4 RL. Hausler, T.G. Martin, D.W. Stegnann, M.B. Ward, Development of a Corrosion Inhibition Model: Laboratory Studies, paper to be presented at CORROSION/99, NACE 1999, paper No. 002 5 R.IL Hauslerjnhibierung der Erosions Korrosion, Werkstoffe und Korrosion, 44. 21, 1993
- 6. DJ. Blumer, ILL. Barnes, A. Perkins, Field Experience with a New High Resolution Programmable Downhole Corrosion Monitoring Tool, CORROSION/98, NACE 1998, paper 56;
- 7. K.D. Efrid, Correlation of Steel Corrosion in Pipe Flow with Jet Impingement and rotating Cylinder Tests, Corrosion 49. (12) 992, (1993)
- 8. D. Silvermann,_Rotating Cylinder Electrode for Velocity Sensitive Testing, Corrosion, 40 (5) 220, (1984)
- 9. D. Silvermann,_Rotating Cylinder Electrode- Geometry Relationships for the Prediction of Velocity-Sensitive Corrosion, Corrosion 44. (1) 2, 1988.
- 10. G. Schmitt, T. Simon, ILIL Hausler, CO2 Erosion Corrosion and its Inhibition under Extreme Shear Stress, I. Development of Methodology, NACE Corrosion/90, paper 022, 1990.
Table 3 Production Data from PUMU 9-6 During Corrosion Rate Test With Downhole Continuous Corrosion Monitor Date Oil Water Gas CO 2 Csg Pres. Tbg Pres. Csg Temp Tbg Temp Fluid Bbl/d Bblid MSCFD % psi psi F F Level ft. 9/23/97 196 244 182 45 9/24/97 188 180 98 103 9/25/97 205 295 158 185 170 96 106 1005 9/27/97 216 298 175 60 9/28/97 160 260 9/29/97 170 285 92 102 10/2/97 182 268 93 100 10/3/97 199 260 137 10/4/97 165 262 101 105 10/5/97 188 269 132 10/8/97 170 280 88 94 10/13/97 - 172 290 91 98 10/16/97 168 292 93 101 10/21/97 173 310 91 94 11/4/97 170 205 85 94 - - - -- -- - - --
Table 4 Postle Field Water Analyses Field Unit: PUMU Well Number. 9-6 Analysis DOW Chlde mgn Blcarb.mg Calcum fm/ Mgh Iwnmgi IMrOIL 3/15/96 30442 239 3414 552 3.5 2/28/97 32251 302 3365 620 28 7/8/97 34873 317 3575 641 19 10/8/97 39475 927 4378 856 89 10/10/97 39172 966 4047 864 78 3/28/98 41117 1552 3050 693 127 Table 5 Postle Field Water Analyses Field Unit: HMAU Well Number. 54 Analysis Da*t Chlorkde m*/I carb.,m*g Calcium mg/I Magnesium mgnl Ir mgIL 11/4/96 79571 171 9737 1390 24 7/1/97 93746 42 10602 1444 48
Table 6 HMAU 54 Corrosion Test with Downhole Corrosion Monitor Comparison of Different Corrosion Rates Inhibitor Downhole Surface Corr. Rate Concentration ER- Corr. Percent ER- Corr. Percent LPR Corr. from Fe cnt. Rate (mpy) Protection Rate (mpy) Protection Rate (mpy) Blank (0 ppm 82 0 67 0 2.5 157 Inhibitor) 265 ppm CRO- 1.3 98.4 0.4 99.4 0 174 396 150 ppm CRO- 4.1 95 1.2 98.2 0 n.a. 396 Mr we i-m nm w
-M M M-- - m -un nm IR M M M M
- -* -m -l i Im* - --- - n - - In B *- Figure 1: Contour Plot of Iso-Corrosion Lines for J-55 at 100 ppm Inhibitor C Evaluated in High Speed Autoclave Test 12.8 mpy 26 mpy 1500 12507 1000o 0.8 mpy 2 0 0 400 600 2.1 mpy 8 0 0 PRESSURE PSI
Figure 2: Cross-Sectional View of Fmuly Assembled Downhole Corrosion Monitoring System 5/6- API SUCKER ROD CONNECTION 14OUNTINC HEAD ADAPTER~ SPRING ASSY BATTERY ASS*Y INSTRUM~ENT BODY INSTRUMJENT TUBE ASSY
-PROBE SEAL LOADINC NUT LOADING WASHER INSULArING WASHER PROBE ADAPTER PROBE ASSY PROBE SHIELD PROBE TIP INSUL.ATOR 1.25 DLA
3/8 "Tubing Sub and Tubing
.2 3/8 " x 3 1/2" change over 3 1/2" Collar 3.1/2" IPC joint approx 30 ft Capillary ESP Cable Typical Completion of Producing Well in CO 2 Flood with full length Top ESP Pump Capillary Bottom ESP Pump Gas Separator Pump Intake Motor Protector .F3erforations approx 6150 ft ESP Motor E3ottom of Motor approx. 6000 ft 1
Fail Pipe approx. lOOft Tail Pipe 5" Uner V> .1 Perforations
.Figure 4: Time Line for PUMU 9-6 Downhole Corrosion Monitoring Test Septemb er October November Week of 9/22 9/29 10/6 10/13 10/19 10/27 11/3 11/10 m m - - m m - m
- m - ----
FiQure 5: Pumu 9-6 Downhole Temperature and Corrosion Rate Measurements; Uninhibited Period 0.9 200 0.8_ - 180 160 0.7 _ ________" 0.6 L_ _ -- 140 E __ 120 0.Inhibitor started 3.27 days 1@ 100 0.4 . . 0.30 0.2 Metal Loss in mils
-*1 20 --- Temperature (C)
- 0. t o 0 1 2 3 4 6 Start 9123111:00 r, as End 101271971 12:00 111Wil Uayo
Flaure 6: PUMU 9-6 Downhole Corrosion Rates; Uninhibited Period 1 0.8 0.6 0.4 0.2 0 2 3 4 5 Start 9123197 11:00 Time ldawlvn
...... iwujrvI End 9/27/97 12:00 M-M . M Mm' M M M- I M M M NoM M M M
, IU m 1mim mNi m mm rn m - mm Fiaure 7: PUMU 9-6 Surface Corrosion Rate Initial Period of Surface Measurements
--*-Raw Data Blank 0.95 -} 1 mpy Reference Line .......... -__ * -i-Raw Data Inhibited Inhibitor Injection 0 g 0.9 to - 0.85 01*
34.MPY 0 LOA-0 A mlm So 0.8 10V
-- - - -- --O Li P .1 la s o s 0.75 0.7 0.65 0.6 0 0.5 I 1.5 2 2.5 3 3.5 Start 9124197 17:56 Time (days) Run Ends 111419:56
Fiiure 8: Timeline for HMAU 54 Downhole Corrosion Monitoring Test November Week of 11/3 11/10 11/17 11/20 11/27 Test. eriod 1 (unibhibi1 d) 111/4/97 Installdh probe 15:30 pm I Install Surface ER and LPR probes 18:45 pm [11/9/977":4,5am[ Start CRO-396 injection at 300 ppm test Period2: i(nhipited) 11/10/97 9:00 a.m. pulled dh ER probe and installed new one 111114/97 reduced chemical rate to 150 ppm St11/19/97 I iI Well wne down with pump failure
* !11/20/97 remove surface probes "I
- 11/25/97 pulled dh probe MIM mmm M mmmmM MM=M
Figure 9: HMAU 54 Downhole Corrosion Tool 3 180 160 2.5 140 2 120 11.52 100 8o& i"1 E 60 40 0.5 20 0 0 0 ,1 2 3 4 5 6 7 1114197 10:35 Time (days) 11110197 10:25
Figure 10: HMAU 54 Surface ER Probe Uninhibited Period 1.8 1.6
- 1.4 -
1.2
-J I.
0.6 0.4 - 0.2 0 0 1 2 3 4 5 6 7 Start 1111197 14.29 p.m. Time (days) End 11110197 8:29 am 11-1 m MM M - m m M M M M M M
m m mI- m - m m-- m = m m m Finure 11: HMAU 54 Downhole Corrosion Monitor: Inhibited Periods Inhibited at 265 and IS;0 nom 0.7 -. 400 0.66 - _ _ __ _ _ __ _ _ _ 360 0.6 300 0.$$" -_. . .... ... 250 p m mpy 0.6- y= 0.,0476x + 0.490 200j
.0.46 160 0.4----- 100 --- Period with 300 ppm Inhib. - Period with 200 ppm Inhib.
0.35- 1 0.35 Post Upset Period (no flow) - Equilibration Period 0 0 .3 -............. Temperature (F) 0 0 2 4 6 8 10 12 14 16 Start 11110197 5:15 pm Time (days) End 11125197 10:15
Figure 12: HMAU 54 Surface ER Probe Inhibited 1.36 1.35 1.34 i 1.33 1.32 1.31 1.3 0 2 4 6 8 10 12 Start 11110197 17:37 Time (days) End 11120197 10/22 -m mM m -Mm mW M m mMm M
1m1 1m m m 1M -1 - - - - m - m m Fiaure 13: HMAU 54 Surface LPR Corrosion Monitor RPlL-n PirmnrI ane4 Inhiks",,,t4 f 13C ,tn,.I 49A 5 i*E*1 Ill ~ qlIemEnl~w llllJILl.d-U /- YDJl 1 III
. IV 1*111 Uninhibited 4 .5 . .. . - - - - 1 __
4 "--*Inhibitedwith 265 ppm 3.6.. .. ---- *-Inhibited with 150 ppm CL 3.2 I 2.01 6 , 0 l 0 I" 0.03 mpy 0.03 mpy 0.00 2.00 4.00 6.00 8.00 10.00 12.00 14.00 16.00 18.00 Start 11/4197 17:48 Time (davsl End 11119/97 10:41 a.m.
---------------------------------------------- '--J -,
Figure 14: RPM as function of Shear Stress for Rotating Cage (Empirical fit to calculated data points) 1600 1400 1200 1000 E L. 800 600 400 200 0 0 10 20 30 40 50 Shear Stress (N/m 2) -- .I m I II II- m -II m -
m=-mm
= M M M mm m= - =M m m -
Figure 15: Contour Plot for Constant Effective Inhibitor Concentration Necessary to Achieve 1 mpy Target Corrosion Rate on J-55 1500 1250 1000 750 500 0 200 400 600 800 PRESSURE (PSi) ()Field Corrosion Rate Measurement
Fi2ure 16: Contour Plot for Constant Effective Inhibitor (C) Concentration Necessary to Achieve 4 mpy Target Corrosion Rate on J-55 1500 1250
- 1000 (L
750. 500 0 200 400 600 800 PRESSURE (*) Field Corrosion Rate Measurement m m m m m - - - - m m m m 1
APPLICANT'S EXHIBIT 60 Luca Bertolini, Bernhard Elsener *W ILEY-VCH Pietro Pedeferri, Rob Polder Corrosion of Steel in Concrete
3.2 Attack by Acids and Pure Water 57 by BSA. This stimulated new research into the biological origins [13], the identifi-cation [14], the influence of concrete composition [15] and possible countermea-sures. Some aspects will be treated here briefly. 3 Anaerobic conditions can occur in sewers due to long retention times of waste-water, e. g. unexpectedly due to uneven settlement, as illustrated in Figure 3.3; was-tewater in (completely filled) pressure mains becomes anaerobic after being trans-ported for a few hours. Liberation of the H 2S formed is subsequently promoted by turbulent overflow of anaerobic sewage into aerobic parts of the system. Various I types of thiobacilli develop colonies on the concrete surface, which have increasing tolerance for acidic conditions. The final type in this series is thiobacillus thiooxi-dans (also called concretivorus), which is able to produce (and survive) sulfuric acid with concentrations up to 10 % by mass with a pH below 1. The cement matrix is I converted by the reaction with the acid to mainly gypsum and eventually, the con-verted layer of concrete falls off. Exposure testing for three years in sewers at Rot-terdam showed that the rate of attack can be as high as 3 mm per year, with insig-nificant differences between (both very dense) Portland and blast furnace slag ce-ment concrete 14]. However, high alumina cement showed superior behaviour [16]. A particular sewer system can be tested for BSA by measuring the oxygen I and sulfide contents of the wastewater and the pH of the concrete surface (using colour-indicator solutions). The presence of turbulent overflows must be. checked and the sewage temperature taken into account [14]. Avoiding long re-I tention times is the best preventative design strategy. Adding oxygen, hydrogen peroxide or nitrate to sewage in order to counteract; anaerobic conditions has I been successful. In some cases, increasing the flow by connecting rain drainages solved the problem. In large sewer pipe elements, protection of concrete by poly-meric sheeting placed in the mould prior to concrete casting is used as a preven-tative measure. I 3.2.3 I Attack by Pure Water Pure water, that is water with a low amount of dissolved solids, in particular cal- I cium ions, acts aggressively towards concrete because it tends to dissolve calcium compounds. If the water flow rate is high, hydrolysis of hydration products con-tinues, because the solution in contact with the concrete is continually being refreshed. Initially, calcium hydroxide, the most soluble' component of cement paste, is removed. Then other components are attacked, producing a more open matrix, making the concrete more penetrable to fuither attack by aggressive solu-tions. Eventually this will have a deleterious effect on its strength. In the presence of cracks or construction defects, water can more easily percolate through the con-crete, aggravating the aforementioned processes. The degree of the attack by pure water depends to a large extent on the perme-ability of the concrete, but its Ca(OH) 2 content also plays an important role. Con-crete types with a low level of Ca(OH)2 , like blast furnace slag cement concrete, have improved resistance with regard to this type of degradation. In addition to
!I ' I
741 4 Gencral Aspects
.AL 1000-Concrete heavily contaminated by chloride and 95-98% R.H.
100 Concrete contaminated by chloride and 90-95% R.H. or carbonated concrete L.2 and 95-98% R.H. Concrete contaminated by chloride and 80-90% R.H. 10 or carbonated concrete and 90-95% RH. 0 Concrete contaminated by chloride and 50-80% R.H. or carbonated concrete and. 70-90% R.H. 0 1 1wL00 505 Concrete carbonated or contaminated by chloride
* . satured by water or dry: R.H. < 50% (chloride),
R.H. < 70% (carbonation) 0.1 Concrete non-carbonated and without chloride Negligible Figure 4.2 Schematic representation of corrosion rate of steel in different concretes and exposure conditions (after [9], modified) 4.3 Consequences The consequences of corrosion of steel reinforcement do not involve only the ser-
-viceability or the external condition of the structure, but may also affect its struc-tural performance, and therefore its safety.
Figure 4.3 Structural consequences of corrosion in reinforced concrete structures [lO]
APPLICANT'S EXHIBIT 61 NUREG-1801, Vol. 2, Rev. 1 Generic Aging Lessons .Generic Aging Lessons Learned (GALL) Report Tabulation of Results Manuscript Completed: September 2005 Date Published: September 2005 Division of Regulatory Improvement Programs Office of Nuclear Reactor Regulation U.S. Nuclear Regulatory Commission Washington, DC 20555-0001
I Al. CONCRETE CONTAINMENTS (REINFORCED AND PRESTRESSED) I Systems, Structures, and Components This section addresses the elements of pressurized water reactor (PWR) concrete containment I structures. Concrete containment structures are divided into three elements: concrete, steel, and prestressing system. I System Interfaces Functional interfaces include the primary containment heating and ventilation system (VII.F3), I containment isolation system (V.C), and containment spray system (V.A). Physical interfaces exist with any structure, system, or component that either penetrates the containment wall, such as themain steam system (VIII.B1) and feedwater system (VIII.D1), or is supported by the containment structure, such as the polar crane (VII.B). The containment structure basemat typically provides support to the nuclear steam supply system (NSSS) components and containment internal structures. I U I I I I I. September 2005 II Al-1 NUREG-1801, Rev. 1
m m - iM nMMMn m M m a - z ;11 CONTAINMENT STRUCTURES C Al . Concrete Containments (Reinforced and Prestressed) 00 StructureFrte Further ndor in Mteia Environment EvrometMechanismAging Effect/ Aging Management
*.Evaluation Program (AMP)
C? Item Link Itm and/or Material Component X II.A1-1 IL.A1.1-h Concrete: Concrete Air - indoor Reduction of Plant-specific aging management Yes, if uncontrolled or strength and program temperature (C-08) Dome; wall; air - outdoor modulus/ elevated limits are basemat; ring temperature The implementation of 10 CFR 50.55a exceeded girder; (>150°F general; and ASME Section XI, Subsection IWL buttresses >200°F local) would not be able to identify the reduction of strength and modulus of elasticity due to elevated temperature. Thus, for any portions of concrete containment that exceed specified temperature limits, further evaluations are warranted. Subsection CC-3400 .of ASME Section III, Division 2, specifies the concrete temperature limits for normal operation or any other long-term period. The temperatures shall not exceed 150°F except for local areas, such as around penetrations, which are not allowed to exceed 200'F. If significant equipment loads are supported by concrete at temperatures exceeding 150'F, an evaluation of the ability to withstand the postulated design loads is to be made. Higher temperatures than given above may be allowed in the concrete if tests and/or calculations are provided to evaluate the reduction in strength and this reduction is applied to the design CD allowables. CD a-
0)~ CD 11 CONTAINMENT STRUCTURES Al Concrete Containments (Reinforced and Prestressed) CD CD Structure Aging Effect/ Further C) Item Link andCor Material Environment Mechanism Aging Management Program (AMP) Evaluation C,, iComponent Il.A1-2 II.Al. 1-a Concrete: Concrete Air - outdoor Loss of material Chapter XI.S2, "ASME Section XI, Yes, for (spalling, scaling) Subsection IWL" inaccessible (C-01) Dome; wall; and cracking/ areas of plants basemat; ring freeze-thaw Accessible areas: located in girders; Inspections performed in accordance moderate to buttresses with IWL will indicate the presence of severe loss of material (spalling, scaling) and weathering surface cracking due to freeze-thaw. conditions Inaccessible Areas: Evaluation is needed for plants that are located in moderate to severe weathering conditions (weathering index
>100 day-inch/yr) (NUREG-1557).
Documented evidence confirms that where the existing concrete had air content of 3% to .6%, subsequent inspection did not exhibit degradation related to freeze-thaw. Such inspections should be considered a part of the evaluation. The weathering index for the continental I__ __US is shown in ASTM C33-90, Fig. 1. 1 z m G m - -m-m m mm m-- mm m m m m -m
= =---- = M = M---- = -M - - z 1I CONTAINMENT STRUCTURES Al Concrete Containments (Reinforced and Prestressed) m 00 Structure Stutue.Aging Effect! aaeet rga AP Further and/or Material Environment Mechanism Aging ManagEltement Program (AM Euation C? Item Link Mechanism _)_Evaluation Component CD II.A1-3 II.A1.1-d Concrete: Concrete Any Cracking due to Chapter XI.S2, "ASME Section XI, Yes, if expansion/ Subsection IWL" concrete was (C-04) Dome; wall; reaction with not basemat; ring aggregates Accessible Areas: constructed as girders; Inspections performed in accordance statedfor buttresses with IWL will indicate the presence of inaccessible surface cracking due to reaction with areas aggregates; Inaccessible Areas: As described in NUREG-1557, investigations, tests, and petrographic examinations of aggregates performed in accordance with ASTM C295-54 or ASTM C227-50 can demonstrate that those aggregates do not react within reinforced concrete. For potentially reactive aggregates, aggregate-reinforced concrete reaction is not significant if the concrete was constructed in accordance with ACI 201.2R.Therefore, if these conditions are satisfied, aging management is not necessary. CD CD B Cr CD
11 CONTAINMENT STRUCTURES Al Concrete Containments(Reinforced and Prestressed) Structure Aging Effect/ Further Item Link and/or Material Environment Mechanism Aging Management Program (AMP) Evaluation Component II.A1-4 II.A1.1-c Concrete: Concrete Ground Increase in Chapter XI.S2, "ASME Section XI, Yes, plant-water/soil or air- porosity and Subsection IWL". specific if (C-03) Dome; wall; indoor permeability, environment is basemat; ring uncontrolled or cracking, loss of Accessible Areas: aggressive girders; air-outdoor material (spalling, Inspections performed in accordance buttresses scaling)/ with IWL will indicate the presence of aggressive increase in porosity and permeability, chemical attack surface cracking, or loss of material (spalling, scaling) due to aggressive chemical attack. Inaccessible Areas: For plants with non-aggressive ground water/soil; i.e., pH > 5.5, chlorides < 500 ppm, or sulfates <1500 ppm, as a minimum, consider (1) Examination of the exposed portions of the below grade concrete, when excavated for any reason, and (2) Periodic monitoring of below-grade water chemistry, including consideration of potential seasonal variations. For plants with aggressive groundwater/soil, and/or where the concrete structural elements have experienced degradation, a plant specific AMP accounting for the extent of the degradation experienced should be implemented to manage the concrete aging during the period of extended operation. = M = m M - m - = m - m m m m M}}