ML110840069: Difference between revisions
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
||
Line 1: | Line 1: | ||
{{Adams | |||
| number = ML110840069 | |||
| issue date = 03/31/2011 | |||
| title = NEDO-33618, Revision 0, Vermont Yankee Core Plate Bolt Stress Analysis Report, Attachment 2 to Bvy 11-021 | |||
| author name = | |||
| author affiliation = GE-Hitachi Nuclear Energy Americas, LLC | |||
| addressee name = | |||
| addressee affiliation = NRC/NRR | |||
| docket = 05000271 | |||
| license number = DPR-028 | |||
| contact person = | |||
| case reference number = BVY 11-021 | |||
| document report number = DRF 0000-0125-3751, Rev 3, NEDO-33618 | |||
| document type = Report, Technical | |||
| page count = 23 | |||
}} | |||
=Text= | |||
{{#Wiki_filter:BVY 11-021 Attachment 2 Vermont Yankee Nuclear Power Station License No. DPR-28 (Docket No. 50-271)Vermont Yankee Core Plate Bolt Stress Analysis Report (Non-proprietary Version) 0 HITACHI GE Hitachi Nuclear Energy NEDO-33618 Revision 0 DRF Section 0000-0125-3751-R3 March 2011 Non-Proprietary Information | |||
-Class I (Public)VERMONT YANKEE CORE PLATE BOLT STRESS ANALYSIS REPORT Copyright 2011 GE-Hitachi Nuclear Energy Americas LLC All Rights Reserved NEDO-33618 | |||
-REVISION 0 INFORMATION NOTICE This is a non-proprietary version of the document NEDC-33618P, Revision 0, which has the proprietary information removed. Portions of the document that have been removed are identified by an open and closed bracket, as shown here [[IMPORTANT NOTICE REGARDING CONTENTS OF THIS REPORT Please Read Carefully The design, engineering, and other information contained in this document is furnished for the purpose of supporting Entergy Nuclear Operations, Inc. in proceedings before the U.S. Nuclear Regulatory Commission. | |||
The only undertakings of GEH with respect to information in this document are contained in the contracts between GEH and its customers or participating utilities, and nothing contained in this document shall be construed as changing that contract. | |||
The use of this information by anyone for any purpose other than that for which it is intended is not authorized; and with respect to any unauthorized use, GEH makes no representation or warranty, and assumes no liability as to the completeness, accuracy, or usefulness of the information contained in this document.ii NEDO-33618 | |||
-REVISION 0 TABLE OF CONTENTS 1.0 Introduction | |||
.......................................................................................................................... | |||
1 2 .0 S c o p e .................................................................................................................................... | |||
1 3.0 Sum m ary of Analysis Results .......................................................................................... | |||
1 4.0 Structural Acceptance Critiera ....................................................................................... | |||
2 4.1 A llow able Stress Lim its .............................................................................................. | |||
2 5.0 Stress Relaxation Evaluation | |||
.......................................................................................... | |||
2 5 .1 S c o p e ............................................................................................................................... | |||
2 5.2 Evaluation | |||
....................................................................................................................... | |||
2 6.0 Loads and Load Com binations | |||
........................................................................................ | |||
6 6.1 Load Com binations | |||
.................................................................................................. | |||
7 6.2 Horizontal Seism ic Loads .......................................................................................... | |||
8 6.3 V ertical Seism ic Loads .............................................................................................. | |||
8 6.4 Fluid Drag and D eadw eight Loads ............................................................................. | |||
8 6 .5 P re lo a d ............................................................................................................................ | |||
8 6.6 Friction ............................................................................................................................ | |||
8 6.7 Fluence ............................................................................................................................ | |||
9 6.8 Therm al Relaxation | |||
...................................................................................................... | |||
9 7.0 Structural Analysis ........................................................................................................ | |||
10 7.1 Com ponents .................................................................................................................. | |||
10 7.2 Scenario D escriptions | |||
.............................................................................................. | |||
12 7.2.1 Scenario 1 .................................................................................................................. | |||
12 7.2.2 Scenario 2 .................................................................................................................. | |||
12 7.2.3 Scenario 3 .................................................................................................................. | |||
13 8.0 Analysis Results ............................................................................................................. | |||
13 8.1 Comparison of Core Plate Bolt Stresses to ASME Allowable Limits ...................... | |||
13 9.0 Conclusion | |||
......................................................................................................................... | |||
15 10.0 References | |||
.......................................................................................................................... | |||
15 iii NEDO-33618 | |||
-REVISION 0 LIST OF FIGURES Figure 5-1 Relaxation of Irradiated Austenitic Steels & Ni-Alloys (GEH Mean D esign C urve) ..................................................................................................... | |||
4 Figure 5-2 Stress R elaxation D ata ........................................................................................ | |||
5 Figure 5-3 Relaxation of Irradiated Austenitic Steels (GEH Mean Design Curve and A dditional D ata) ................................................................................................. | |||
6 Figure 7-1 Generic Core Plate Assembly Component Names ............................................... | |||
11 Figure 7-2 Core Plate Bolt and Aligner Pin Configuration | |||
................................................. | |||
12 iv NEDO-33618 | |||
-REVISION 0 LIST OF TABLES Table 4-1 A llow able Stress Lim its ..................................................................................... | |||
2 Table 6-1 Loads Considered for Analysis (Faulted Condition) | |||
.......................................... | |||
7 Table 6-2 Load C om binations | |||
............................................................................................ | |||
7 Table 8-1 Stresses Compared to ASME Allowable Limits (Faulted Condition) | |||
.............. | |||
14 V NEDO-33618 | |||
-REVISION 0 ACRONYMS AND ABBREVIATIONS Term Definition ABS Absolute Value ASME American Society of Mechanical Engineers B&PVC Boiler and Pressure Vessel Code BWR Boiling Water Reactor BWRVIP Boiling Water Reactor Vessel and Internals Project DCB Double Cantilever Beam dpa Displacements Per Atom (Proportional to Fluence)DW Deadweight Entergy Entergy Nuclear Operations, Inc.EPRI Electric Power Research Institute FCC Face-Centered Cubic FE Finite Element FL Fuel Lift GEH GE-Hitachi Nuclear Energy Americas, LLC ICGT In-Core Guide Tube kips Kilo-pounds (1000 x lbf): a unit of force ksi Kilo-pounds-per-square-inch (1000 x psi): a unit of mechanical stress (or pressure)LOCA Loss-of-Coolant Accident MeV Mega Electron Volts MWt Megawatts, Thermal NRC Nuclear Regulatory Commission OBE Operating Basis Earthquake RG Regulatory Guide RIPD Reactor Internal Pressure Difference (psi)SRV Safety Relief Valve SS Stainless Steel SRSS Square Root Sum of Squares vi NEDO-33618 | |||
-REVISION 0 SSE Safe Shutdown Earthquake UFSAR Updated Final Safety Analysis Report VYNPS Vermont Yankee Nuclear Power Station vii NEDO-33618 | |||
-REVISION 0 1.0 Introduction Entergy Nuclear Operations, Inc. (Entergy) has requested a plant-specific core plate' hold-down bolt stress analysis for Vermont Yankee Nuclear Power Station (VYNPS). This plant-specific analysis performed by GE-Hitachi Nuclear Energy Americas, LLC (GEH) is consistent with Electric Power Research Institute's (EPRI) Boiling Water Reactor Vessel and Internals Project (BWRVIP)-25 Appendix A (Reference | |||
: 1) and VYNPS's current licensing basis. This analysis shows that the core plate bolts in VYNPS meet American Society of Mechanical Engineers (ASME) code allowable limits. This demonstrates that VYNPS core plate bolts can withstand Normal, Upset, Emergency, and Faulted loads, considering the effects of stress relaxation on the bolts until the end of the 60-year period of plant operation. | |||
===2.0 Scope=== | |||
The purpose of the stress calculations performed herein is to demonstrate the structural adequacy of the VYNPS core plate bolts and aligner pins if subjected to the three scenarios listed in BWRVIP-25 Appendix A. Plant-specific data is applied in the analysis, and ASME Boiler and Pressure Vessel Code (B&PVC) Section III is used as a guide for the allowable stress limits.The methodology contained within this report also scales some results from the BWRVIP-25 Appendix A data where plant-specific data is not available. | |||
This analysis includes stress relaxation due to 60-year fluence and thermal effects. This report also includes a stress relaxation evaluation. | |||
Results for the core plate bolt stress levels are presented. | |||
This analysis only reports whether or not the stresses in the core plate bolts will remain under ASME allowable values for the scenarios listed in BWRVIP-25 and associated loading conditions. | |||
===3.0 Summary=== | |||
of Analysis Results This analysis shows that the VYNPS core plate bolts meet the ASME Code allowable stresses for the loading conditions and assumptions made for all three scenarios analyzed in BWRVIP-25 Appendix A throughout a 60-year period of plant operation. | |||
A summary of these results can be found in Table 8-1 and details of the analysis results can be found in Section 8.0. The three scenarios are: 1. Loads on the core plate bolts with no credit for aligner pins (the bolts take all of the horizontal and vertical loads)2. Shear load on the aligner pins with no credit for horizontal bolt restraint (the bolts take the vertical loads and the aligner pins take all of the horizontal loads)The proper component terminology is core support, but core plate has been used almost universally and will be used in this report.I NEDO-33618 | |||
-REVISION 0 3. Loads on the core plate bolts with no credit for aligner pin and also with the stiffener-beam-to-rim weld cracked (the core plate bolts take all of the horizontal and vertical loads)4.0 Structural Acceptance Critiera The acceptance criteria are consistent with VYNPS Updated Final Safety Analysis Report (UFSAR) (Reference | |||
: 2) as shown in Table 4-1. The material properties were taken from the 1965 ASME B&PVC (Reference 3). After analyzing Normal/Upset, Emergency, and Faulted Conditions, it was determined that the limiting load combinations are for Service Level D (Faulted Condition). | |||
The Faulted Condition results are reported in Section 8.0.4.1 Allowable Stress Limits Table 4-1 Allowable Stress Limits Service Level C Service Level D Stress Category Allowable Limit' Allowable Limit'Membrane Stress (Pro) 1.5 Sm 2.0 Sm Membrane (P,,) + Bending (Pb) Stress 2.25 Sm 3.0 Sm Shear Stress 0.9 Sm 1.2 Sm Note: ' Reference 2 (page C.2-27 of 65)5.0 Stress Relaxation Evaluation | |||
===5.1 Scope=== | |||
This section of the report discusses the relaxation of VYNPS core plate bolt stress due to irradiation and the basis for the stress relaxation evaluation, including the following: | |||
* GEH design curves (Figures 5-1 and 5-3) that are based on a model using stress-linear, primary plus secondary creep law form, and are fitted to the available data in Figure 5-1 using stepwise multiple regression data;" Stress relaxation curves, including the loads used to develop the stress relaxation curves;" An analysis of the effect of austenitic material type on stress relaxation from neutron radiation; and" Results documenting that the GEH design curves apply to Type 304SS, including the effect of test temperature and neutron flux on stress relaxation. | |||
===5.2 Evaluation=== | |||
Stress-relaxation properties of irradiated austenitic steels and nickel alloys have been studied extensively by GEH, and mean and 95-95 limit curves have been developed. | |||
[[2 NEDO-33618 | |||
-REVISION 0]]Er (1)Er (2)Er (3)Er 3 NEDO-33618 | |||
-REVISION 0 Figure 5-1 Relaxation of Irradiated Austenitic Steels & Ni-Alloys (GEH Mean Design Curve)[[]] (4)High-energy radiation produces a number of simultaneous effects in materials, primarily originating with the displacement of atoms from their original lattice position to relatively distant locations, usually as an interstitial. | |||
The interstitial atoms and the associated vacancies group into interstitial and vacancy clusters (hardening), migrate to grain boundaries, and relax constant displacement stresses due to the resulting interaction with dislocations. | |||
These radiation-induced effects in austenitic SSs are most strongly influenced by the face-centered cubic (FCC) structure of the materials, which is a common attribute of the materials used in developing the design curve.4 NEDO-33618 | |||
-REVISION 0 To further support this observation, see Figure 7-17 in the BWRVIP-99 report (Reference 4), shown below as Figure 5-2.Figure 5-2 Stress Relaxation Data 40 35.30 +925 -L C 20, 15.10'5, I I1. I1 .I...I...I. | |||
.Irradiation Stress Relaxation 2 30413181348 Stainless Steel DCBs ;0 288 OC, Pure Water45 4 u.t 0 1 2 4 5 6 7 Neutron F luence, n/cm 2 (>IMeV) x10 2 0 Figure 5-2 shows stress relaxation data from wedge loaded double cantilever beam (DCB)specimens in 288°C water that are exposed to neutron fluences of approximately 4.4 to 6 x 1020 n/cm 2 (>1 MeV) (i.e., approximately 0.6 to 0.9 dpa) (Reference 5). This data shows stress relaxation levels clustered between 28% and 36% for DCB specimens fabricated from 304/316/348 SSs. This data is for fluence levels nearly 10 times higher than that predicted for the VYNPS bolts, but the effects at lower fluences would be no more pronounced. | |||
5 NEDO-33618 | |||
-REVISION 0 Figure 5-3 Relaxation of Irradiated Austenitic Steels (GEH Mean Design Curve and Additional Data)The in-core specimen data used to establish this trend line (Figure 5-1) was irradiated at temperatures of approximately 5507F, which is equivalent to the temperatures experienced by the core plate bolts. Temperature effect is thus considered negligible. | |||
===6.0 Loads=== | |||
and Load Combinations The loads shown in Table 6-1 were considered for this analysis. | |||
[[6 NEDO-33618 | |||
-REVISION 0 Table 6-1 Loads Considered for Analysis (Faulted Condition) | |||
Load Value Reference 4 i According to the UFSAR for VYNPS, the following load combinations shown in Table 6-2 apply. The allowable stress limits are determined from the UFSAR (Reference 2, page C.2-27 of 65) and the material properties for Type 304SS plate (SA-240) as defined in Table N-421 of the 1965 Section III ASME B&PVC (Reference 3).Table 6-2 Load Combinations Service Level Loads Allowable Pm + Pb Stress Normal/Upset A/B DW + Normal RIPD + OBE 24 ksi Emergency C DW + Normal RIPD + SSE 36 ksi Faulted D DW + Faulted RIPD + SSE + FL 48 ksi All load combinations were considered in the evaluation and the Faulted Condition (Level D) is the most limiting.6.1 Load Combinations The total horizontal load is effectively equal to the horizontal SSE load. The vertical loads on the core plate bolts are caused primarily by the pressure differential across the core plate. The SSEver, also contributes to the vertical load on the core plate bolts. The DW opposes the vertical load. Peripheral fuel weight has conservatively not been included. | |||
FL also adds to the vertical load for the Faulted Condition. | |||
[[7 NEDO-33618 | |||
-REVISION 0 6.2 Horizontal Seismic Loads Plant-specific horizontal direction accelerations and shear loads due to Operating Basis Earthquake (OBE) and SSE were used in this analysis. | |||
[[]]6.3 Vertical Seismic Loads Plant-specific vertical direction accelerations and shear loads due to OBE and SSE were used in this analysis. | |||
[[ ]]6.4 Fluid Drag and Deadweight Loads The fluid drag was applied as a pressure to the bottom surface of the core plate. This pressure differential (RIPD) is caused by fluid flowing across the core plate. It results in an upward load on the core plate bolts. The DW of the core plate is the weight of the core plate assembly mass only, and it opposes the vertical loads.6.5 Preload Preload on the core plate bolts is accounted for by adding the membrane stress resulting from the preload to the calculated membrane stress, which is consistent with the approach used in BWRVIP-25 Appendix A. Preload relaxation due to fluence and temperature was considered in this analysis (see Sections 6.7 and 6.8).6.6 Friction For this analysis, 304SS is interacting with 304SS on a wetted interface. | |||
[[A friction factor of 0.2 has been suggested in BWRVIP-51-A Section 5.5 (Reference | |||
: 7) for modeling the friction restraint for the evaluation of retained flaws unless a higher value can be technically justified. | |||
Typical jet pump material is also SS and the recommendation of friction factor of 0.2 should be applicable for the SS core plate rim and shroud ledge interface. | |||
Additionally, the Licensing Topical Report entitled "Dynamic, Load-Drop and Thermal-Hydraulic Analyses for ESBWR Fuel Racks" uses a friction factor range of 0.2 to 0.8, with a mean value of 0.5 (Reference 8). [[]] for the analysis contained herein, a value of 0.2 for the friction factor is used to be conservative. | |||
The use of the 0.2 friction factor, although still conservative, is more realistic than assuming no friction. | |||
Without friction, all the lateral loads on the core plate will be resisted by the core plate bolts through the bending and shear of the core plate bolts. With this small friction factor, some of the lateral loads are resisted by the friction at the rim and shroud ledge interface, which results in lower loads on the core plate bolts.8 NEDO-33618 | |||
-REVISION 0 Friction was incorporated in the following manner: The original preload in the bolts was reduced due to fluence and thermal relaxation (see forthcoming sections). | |||
This reduced preload, when combined with the vertical loads applied (which act to reduce the normal force at the interface), resulted in a normal force at the interface of the core plate rim and shroud ledge[[6.7 Fluence In 2003, GE performed a best-estimate flux evaluation for the EPU equilibrium core configuration of VYNPS using the Regulatory Guide (RG) 1.190 (Reference | |||
: 9) compliant and Nuclear Regulatory Commission (NRC) approved GE fluence methodology. | |||
Based on that evaluation, best-estimate fast flux (E > 1 MeV) at a thermal power of 1,912 MWt was evaluated for the vessel inside surface, shroud inside surface, and surveillance capsule. The flux results from the 2003 flux calculation were used to estimate the flux and fluence for the core plate bolts at VYNPS. Cycle-dependent energy generation data were provided by Entergy and used to convert the flux into fluence for this analysis.The fluence evaluation performed in support of this analysis resulted in a peak total fast fluence Er The core plate bolt preload will relax with fluence. [[]]6.8 Thermal Relaxation The modulus of elasticity of the steel changes as the reactor is brought to operating temperature. | |||
This effect is included in this analysis by reducing the preload. [[9 NEDO-33618 | |||
-REVISION 0 7.0 Structural Analysis 7.1 Components Figure 7-1 shows the components of a generic core plate (Reference 1). The zero of the azimuthal location, 0, is located along the X-axis. The VYNPS core plate has 30 core plate bolts, each with a diameter of 2 inches. The original preload in each bolt was 900 ft-lbf. This preload is reduced due to fluence and thermal relaxation, as described in Sections 6.5 through 6.8.10 NEDO-33618 | |||
-REVISION 0 Figure 7-1 Generic Core Plate Assembly Component Names Figure 7-2 shows the configuration of the core plate bolts and aligner pins (Reference 1).11 NEDO-33618 | |||
-REVISION 0 Figure 7-2 Core Plate Bolt and Aligner Pin Configuration NUT LOCK HEX NUT CORE SUPPORT SHROUD ALIGNER SHROUD SPHERICAL WASHERS 7.2 Scenario Descriptions | |||
====7.2.1 Scenario==== | |||
1 Aligner pins are not included for this scenario. | |||
All vertical loading is supported by axial stretching of the core plate bolts. The horizontal loads imparted on the core plate are resisted by bending of the core plate bolts and by the friction between the core plate rim and the shroud ledge.7.2.2 Scenario 2 Aligner pins are included for this scenario. | |||
All vertical loading is supported by the axial stretching of the core plate bolts. The aligner pins cannot support a vertical load. The horizontal loads imparted on the core plate are resisted by the shearing of the aligner pins and by the friction between the core plate rim and the shroud ledge. The core plate bolts take only the vertical loads, not the lateral loads.BWRVIP-25 Appendix A determines the maximum of the horizontal loads calculated on all four aligner pins from the Finite Element (FE) model. Then the shear stress on a single aligner pin is calculated by applying this maximum horizontal load. [[12 NEDO-33618 | |||
-REVISION 0 7.2.3 Scenario 3 The difference between this scenario and Scenario 1 is the postulated complete failure of the weld between the stiffener beams and the rim. Aligner pins are not included for this scenario.All vertical loading is supported by axial stretching of the core plate bolts. The horizontal loads imparted on the core plate are resisted by bending of the core plate bolts and by the friction between the core plate rim and the shroud ledge.8.0 Analysis Results 8.1 Comparison of Core Plate Bolt Stresses to ASME Allowable Limits As stated in Section 3.0, this analysis shows that the VYNPS core plate bolts meet the ASME allowable stresses for the loading conditions and assumptions made for all three scenarios analyzed in BWRVIP-25 Appendix A (Reference 1). This analysis follows the BWRVIP-25 Appendix A example analysis with three differences: | |||
: 1. This analysis uses plant-specific loading and geometry for VYNPS and ASME allowable limits consistent with the licensing basis.2. This analysis takes credit for a conservative amount of friction between the core plate rim and shroud ledge.3. Because this analysis does not have a plant-specific FE model, some calculations use scaled values from BWRVIP-25 data.Results for the Faulted Condition, which is the most limiting condition, have been included in Table 8-1.13 NEDO-33618 | |||
-REVISION 0 Table 8-1 Stresses Compared to ASME Allowable Limits (Faulted Condition) 11 14 NEDO-33618 | |||
-REVISION 0 9.0 Conclusion Including the effects of preload relaxation due to thermal effects and fluence for a 60-year plant life, this analysis shows that the VYNPS core plate bolts meet the ASME allowable stresses for the most limiting load combinations and loads for all three scenarios analyzed in BWRVIP-25 Appendix A (Reference 1).10.0 References | |||
: 1. EPRI, "BWR Core Plate Inspection and Flaw Evaluation Guidelines," BWRVIP-25, December 1996.2. Updated Final Safety Analysis Report for VYNPS, Revision 24.3. 1965 American Society of Mechanical Engineers Boiler & Pressure Vessel Code Section III.4. EPRI, "Crack Growth Rates in Irradiated Stainless Steels in BWR Internal Components," BWRVIP-99, December 2001.5. R. Pathania, et al., "Crack Growth Rates in Irradiated Stainless Steels in BWR Internals," 141h International Conference on Environmental Degradation of Materials in Nuclear Power Systems, August 23-27, 2009, Virginia Beach, VA.6. GE Nuclear Energy, "Safety Analysis Report for Vermont Yankee Nuclear Power Station Constant Pressure Power Uprate," NEDC-33090P, Revision 0, September 2003.7. EPRI, "Jet Pump Repair Design Criteria," BWR VIP-5 1-A, September 2005.8. GE Hitachi Nuclear Energy, "Dynamic, Load-Drop and Thermal-Hydraulic Analyses for ESBWR Fuel Racks," NEDO-33373-A, Revision 5, September 2010.9. U.S. NRC, "Calculational and Dosimetry Methods for Determining Pressure Vessel Neutron Fluence," Regulatory Guide 1.190, March 2001.15}} |
Revision as of 18:02, 18 March 2019
ML110840069 | |
Person / Time | |
---|---|
Site: | Vermont Yankee ![]() |
Issue date: | 03/31/2011 |
From: | GE-Hitachi Nuclear Energy Americas |
To: | Office of Nuclear Reactor Regulation |
References | |
BVY 11-021 DRF 0000-0125-3751, Rev 3, NEDO-33618 | |
Download: ML110840069 (23) | |
Text
{{#Wiki_filter:BVY 11-021 Attachment 2 Vermont Yankee Nuclear Power Station License No. DPR-28 (Docket No. 50-271)Vermont Yankee Core Plate Bolt Stress Analysis Report (Non-proprietary Version) 0 HITACHI GE Hitachi Nuclear Energy NEDO-33618 Revision 0 DRF Section 0000-0125-3751-R3 March 2011 Non-Proprietary Information -Class I (Public)VERMONT YANKEE CORE PLATE BOLT STRESS ANALYSIS REPORT Copyright 2011 GE-Hitachi Nuclear Energy Americas LLC All Rights Reserved NEDO-33618 -REVISION 0 INFORMATION NOTICE This is a non-proprietary version of the document NEDC-33618P, Revision 0, which has the proprietary information removed. Portions of the document that have been removed are identified by an open and closed bracket, as shown here [[IMPORTANT NOTICE REGARDING CONTENTS OF THIS REPORT Please Read Carefully The design, engineering, and other information contained in this document is furnished for the purpose of supporting Entergy Nuclear Operations, Inc. in proceedings before the U.S. Nuclear Regulatory Commission. The only undertakings of GEH with respect to information in this document are contained in the contracts between GEH and its customers or participating utilities, and nothing contained in this document shall be construed as changing that contract. The use of this information by anyone for any purpose other than that for which it is intended is not authorized; and with respect to any unauthorized use, GEH makes no representation or warranty, and assumes no liability as to the completeness, accuracy, or usefulness of the information contained in this document.ii NEDO-33618 -REVISION 0 TABLE OF CONTENTS 1.0 Introduction .......................................................................................................................... 1 2 .0 S c o p e .................................................................................................................................... 1 3.0 Sum m ary of Analysis Results .......................................................................................... 1 4.0 Structural Acceptance Critiera ....................................................................................... 2 4.1 A llow able Stress Lim its .............................................................................................. 2 5.0 Stress Relaxation Evaluation .......................................................................................... 2 5 .1 S c o p e ............................................................................................................................... 2 5.2 Evaluation ....................................................................................................................... 2 6.0 Loads and Load Com binations ........................................................................................ 6 6.1 Load Com binations .................................................................................................. 7 6.2 Horizontal Seism ic Loads .......................................................................................... 8 6.3 V ertical Seism ic Loads .............................................................................................. 8 6.4 Fluid Drag and D eadw eight Loads ............................................................................. 8 6 .5 P re lo a d ............................................................................................................................ 8 6.6 Friction ............................................................................................................................ 8 6.7 Fluence ............................................................................................................................ 9 6.8 Therm al Relaxation ...................................................................................................... 9 7.0 Structural Analysis ........................................................................................................ 10 7.1 Com ponents .................................................................................................................. 10 7.2 Scenario D escriptions .............................................................................................. 12 7.2.1 Scenario 1 .................................................................................................................. 12 7.2.2 Scenario 2 .................................................................................................................. 12 7.2.3 Scenario 3 .................................................................................................................. 13 8.0 Analysis Results ............................................................................................................. 13 8.1 Comparison of Core Plate Bolt Stresses to ASME Allowable Limits ...................... 13 9.0 Conclusion ......................................................................................................................... 15 10.0 References .......................................................................................................................... 15 iii NEDO-33618 -REVISION 0 LIST OF FIGURES Figure 5-1 Relaxation of Irradiated Austenitic Steels & Ni-Alloys (GEH Mean D esign C urve) ..................................................................................................... 4 Figure 5-2 Stress R elaxation D ata ........................................................................................ 5 Figure 5-3 Relaxation of Irradiated Austenitic Steels (GEH Mean Design Curve and A dditional D ata) ................................................................................................. 6 Figure 7-1 Generic Core Plate Assembly Component Names ............................................... 11 Figure 7-2 Core Plate Bolt and Aligner Pin Configuration ................................................. 12 iv NEDO-33618 -REVISION 0 LIST OF TABLES Table 4-1 A llow able Stress Lim its ..................................................................................... 2 Table 6-1 Loads Considered for Analysis (Faulted Condition) .......................................... 7 Table 6-2 Load C om binations ............................................................................................ 7 Table 8-1 Stresses Compared to ASME Allowable Limits (Faulted Condition) .............. 14 V NEDO-33618 -REVISION 0 ACRONYMS AND ABBREVIATIONS Term Definition ABS Absolute Value ASME American Society of Mechanical Engineers B&PVC Boiler and Pressure Vessel Code BWR Boiling Water Reactor BWRVIP Boiling Water Reactor Vessel and Internals Project DCB Double Cantilever Beam dpa Displacements Per Atom (Proportional to Fluence)DW Deadweight Entergy Entergy Nuclear Operations, Inc.EPRI Electric Power Research Institute FCC Face-Centered Cubic FE Finite Element FL Fuel Lift GEH GE-Hitachi Nuclear Energy Americas, LLC ICGT In-Core Guide Tube kips Kilo-pounds (1000 x lbf): a unit of force ksi Kilo-pounds-per-square-inch (1000 x psi): a unit of mechanical stress (or pressure)LOCA Loss-of-Coolant Accident MeV Mega Electron Volts MWt Megawatts, Thermal NRC Nuclear Regulatory Commission OBE Operating Basis Earthquake RG Regulatory Guide RIPD Reactor Internal Pressure Difference (psi)SRV Safety Relief Valve SS Stainless Steel SRSS Square Root Sum of Squares vi NEDO-33618 -REVISION 0 SSE Safe Shutdown Earthquake UFSAR Updated Final Safety Analysis Report VYNPS Vermont Yankee Nuclear Power Station vii NEDO-33618 -REVISION 0 1.0 Introduction Entergy Nuclear Operations, Inc. (Entergy) has requested a plant-specific core plate' hold-down bolt stress analysis for Vermont Yankee Nuclear Power Station (VYNPS). This plant-specific analysis performed by GE-Hitachi Nuclear Energy Americas, LLC (GEH) is consistent with Electric Power Research Institute's (EPRI) Boiling Water Reactor Vessel and Internals Project (BWRVIP)-25 Appendix A (Reference
- 1) and VYNPS's current licensing basis. This analysis shows that the core plate bolts in VYNPS meet American Society of Mechanical Engineers (ASME) code allowable limits. This demonstrates that VYNPS core plate bolts can withstand Normal, Upset, Emergency, and Faulted loads, considering the effects of stress relaxation on the bolts until the end of the 60-year period of plant operation.
2.0 Scope
The purpose of the stress calculations performed herein is to demonstrate the structural adequacy of the VYNPS core plate bolts and aligner pins if subjected to the three scenarios listed in BWRVIP-25 Appendix A. Plant-specific data is applied in the analysis, and ASME Boiler and Pressure Vessel Code (B&PVC) Section III is used as a guide for the allowable stress limits.The methodology contained within this report also scales some results from the BWRVIP-25 Appendix A data where plant-specific data is not available. This analysis includes stress relaxation due to 60-year fluence and thermal effects. This report also includes a stress relaxation evaluation. Results for the core plate bolt stress levels are presented. This analysis only reports whether or not the stresses in the core plate bolts will remain under ASME allowable values for the scenarios listed in BWRVIP-25 and associated loading conditions.
3.0 Summary
of Analysis Results This analysis shows that the VYNPS core plate bolts meet the ASME Code allowable stresses for the loading conditions and assumptions made for all three scenarios analyzed in BWRVIP-25 Appendix A throughout a 60-year period of plant operation. A summary of these results can be found in Table 8-1 and details of the analysis results can be found in Section 8.0. The three scenarios are: 1. Loads on the core plate bolts with no credit for aligner pins (the bolts take all of the horizontal and vertical loads)2. Shear load on the aligner pins with no credit for horizontal bolt restraint (the bolts take the vertical loads and the aligner pins take all of the horizontal loads)The proper component terminology is core support, but core plate has been used almost universally and will be used in this report.I NEDO-33618 -REVISION 0 3. Loads on the core plate bolts with no credit for aligner pin and also with the stiffener-beam-to-rim weld cracked (the core plate bolts take all of the horizontal and vertical loads)4.0 Structural Acceptance Critiera The acceptance criteria are consistent with VYNPS Updated Final Safety Analysis Report (UFSAR) (Reference
- 2) as shown in Table 4-1. The material properties were taken from the 1965 ASME B&PVC (Reference 3). After analyzing Normal/Upset, Emergency, and Faulted Conditions, it was determined that the limiting load combinations are for Service Level D (Faulted Condition).
The Faulted Condition results are reported in Section 8.0.4.1 Allowable Stress Limits Table 4-1 Allowable Stress Limits Service Level C Service Level D Stress Category Allowable Limit' Allowable Limit'Membrane Stress (Pro) 1.5 Sm 2.0 Sm Membrane (P,,) + Bending (Pb) Stress 2.25 Sm 3.0 Sm Shear Stress 0.9 Sm 1.2 Sm Note: ' Reference 2 (page C.2-27 of 65)5.0 Stress Relaxation Evaluation
5.1 Scope
This section of the report discusses the relaxation of VYNPS core plate bolt stress due to irradiation and the basis for the stress relaxation evaluation, including the following:
- GEH design curves (Figures 5-1 and 5-3) that are based on a model using stress-linear, primary plus secondary creep law form, and are fitted to the available data in Figure 5-1 using stepwise multiple regression data;" Stress relaxation curves, including the loads used to develop the stress relaxation curves;" An analysis of the effect of austenitic material type on stress relaxation from neutron radiation; and" Results documenting that the GEH design curves apply to Type 304SS, including the effect of test temperature and neutron flux on stress relaxation.
5.2 Evaluation
Stress-relaxation properties of irradiated austenitic steels and nickel alloys have been studied extensively by GEH, and mean and 95-95 limit curves have been developed. [[2 NEDO-33618 -REVISION 0]]Er (1)Er (2)Er (3)Er 3 NEDO-33618 -REVISION 0 Figure 5-1 Relaxation of Irradiated Austenitic Steels & Ni-Alloys (GEH Mean Design Curve)[[]] (4)High-energy radiation produces a number of simultaneous effects in materials, primarily originating with the displacement of atoms from their original lattice position to relatively distant locations, usually as an interstitial. The interstitial atoms and the associated vacancies group into interstitial and vacancy clusters (hardening), migrate to grain boundaries, and relax constant displacement stresses due to the resulting interaction with dislocations. These radiation-induced effects in austenitic SSs are most strongly influenced by the face-centered cubic (FCC) structure of the materials, which is a common attribute of the materials used in developing the design curve.4 NEDO-33618 -REVISION 0 To further support this observation, see Figure 7-17 in the BWRVIP-99 report (Reference 4), shown below as Figure 5-2.Figure 5-2 Stress Relaxation Data 40 35.30 +925 -L C 20, 15.10'5, I I1. I1 .I...I...I. .Irradiation Stress Relaxation 2 30413181348 Stainless Steel DCBs ;0 288 OC, Pure Water45 4 u.t 0 1 2 4 5 6 7 Neutron F luence, n/cm 2 (>IMeV) x10 2 0 Figure 5-2 shows stress relaxation data from wedge loaded double cantilever beam (DCB)specimens in 288°C water that are exposed to neutron fluences of approximately 4.4 to 6 x 1020 n/cm 2 (>1 MeV) (i.e., approximately 0.6 to 0.9 dpa) (Reference 5). This data shows stress relaxation levels clustered between 28% and 36% for DCB specimens fabricated from 304/316/348 SSs. This data is for fluence levels nearly 10 times higher than that predicted for the VYNPS bolts, but the effects at lower fluences would be no more pronounced. 5 NEDO-33618 -REVISION 0 Figure 5-3 Relaxation of Irradiated Austenitic Steels (GEH Mean Design Curve and Additional Data)The in-core specimen data used to establish this trend line (Figure 5-1) was irradiated at temperatures of approximately 5507F, which is equivalent to the temperatures experienced by the core plate bolts. Temperature effect is thus considered negligible.
6.0 Loads
and Load Combinations The loads shown in Table 6-1 were considered for this analysis. [[6 NEDO-33618 -REVISION 0 Table 6-1 Loads Considered for Analysis (Faulted Condition) Load Value Reference 4 i According to the UFSAR for VYNPS, the following load combinations shown in Table 6-2 apply. The allowable stress limits are determined from the UFSAR (Reference 2, page C.2-27 of 65) and the material properties for Type 304SS plate (SA-240) as defined in Table N-421 of the 1965 Section III ASME B&PVC (Reference 3).Table 6-2 Load Combinations Service Level Loads Allowable Pm + Pb Stress Normal/Upset A/B DW + Normal RIPD + OBE 24 ksi Emergency C DW + Normal RIPD + SSE 36 ksi Faulted D DW + Faulted RIPD + SSE + FL 48 ksi All load combinations were considered in the evaluation and the Faulted Condition (Level D) is the most limiting.6.1 Load Combinations The total horizontal load is effectively equal to the horizontal SSE load. The vertical loads on the core plate bolts are caused primarily by the pressure differential across the core plate. The SSEver, also contributes to the vertical load on the core plate bolts. The DW opposes the vertical load. Peripheral fuel weight has conservatively not been included. FL also adds to the vertical load for the Faulted Condition. [[7 NEDO-33618 -REVISION 0 6.2 Horizontal Seismic Loads Plant-specific horizontal direction accelerations and shear loads due to Operating Basis Earthquake (OBE) and SSE were used in this analysis. [[]]6.3 Vertical Seismic Loads Plant-specific vertical direction accelerations and shear loads due to OBE and SSE were used in this analysis. [[ ]]6.4 Fluid Drag and Deadweight Loads The fluid drag was applied as a pressure to the bottom surface of the core plate. This pressure differential (RIPD) is caused by fluid flowing across the core plate. It results in an upward load on the core plate bolts. The DW of the core plate is the weight of the core plate assembly mass only, and it opposes the vertical loads.6.5 Preload Preload on the core plate bolts is accounted for by adding the membrane stress resulting from the preload to the calculated membrane stress, which is consistent with the approach used in BWRVIP-25 Appendix A. Preload relaxation due to fluence and temperature was considered in this analysis (see Sections 6.7 and 6.8).6.6 Friction For this analysis, 304SS is interacting with 304SS on a wetted interface. [[A friction factor of 0.2 has been suggested in BWRVIP-51-A Section 5.5 (Reference
- 7) for modeling the friction restraint for the evaluation of retained flaws unless a higher value can be technically justified.
Typical jet pump material is also SS and the recommendation of friction factor of 0.2 should be applicable for the SS core plate rim and shroud ledge interface. Additionally, the Licensing Topical Report entitled "Dynamic, Load-Drop and Thermal-Hydraulic Analyses for ESBWR Fuel Racks" uses a friction factor range of 0.2 to 0.8, with a mean value of 0.5 (Reference 8). [[]] for the analysis contained herein, a value of 0.2 for the friction factor is used to be conservative. The use of the 0.2 friction factor, although still conservative, is more realistic than assuming no friction. Without friction, all the lateral loads on the core plate will be resisted by the core plate bolts through the bending and shear of the core plate bolts. With this small friction factor, some of the lateral loads are resisted by the friction at the rim and shroud ledge interface, which results in lower loads on the core plate bolts.8 NEDO-33618 -REVISION 0 Friction was incorporated in the following manner: The original preload in the bolts was reduced due to fluence and thermal relaxation (see forthcoming sections). This reduced preload, when combined with the vertical loads applied (which act to reduce the normal force at the interface), resulted in a normal force at the interface of the core plate rim and shroud ledge[[6.7 Fluence In 2003, GE performed a best-estimate flux evaluation for the EPU equilibrium core configuration of VYNPS using the Regulatory Guide (RG) 1.190 (Reference
- 9) compliant and Nuclear Regulatory Commission (NRC) approved GE fluence methodology.
Based on that evaluation, best-estimate fast flux (E > 1 MeV) at a thermal power of 1,912 MWt was evaluated for the vessel inside surface, shroud inside surface, and surveillance capsule. The flux results from the 2003 flux calculation were used to estimate the flux and fluence for the core plate bolts at VYNPS. Cycle-dependent energy generation data were provided by Entergy and used to convert the flux into fluence for this analysis.The fluence evaluation performed in support of this analysis resulted in a peak total fast fluence Er The core plate bolt preload will relax with fluence. [[]]6.8 Thermal Relaxation The modulus of elasticity of the steel changes as the reactor is brought to operating temperature. This effect is included in this analysis by reducing the preload. [[9 NEDO-33618 -REVISION 0 7.0 Structural Analysis 7.1 Components Figure 7-1 shows the components of a generic core plate (Reference 1). The zero of the azimuthal location, 0, is located along the X-axis. The VYNPS core plate has 30 core plate bolts, each with a diameter of 2 inches. The original preload in each bolt was 900 ft-lbf. This preload is reduced due to fluence and thermal relaxation, as described in Sections 6.5 through 6.8.10 NEDO-33618 -REVISION 0 Figure 7-1 Generic Core Plate Assembly Component Names Figure 7-2 shows the configuration of the core plate bolts and aligner pins (Reference 1).11 NEDO-33618 -REVISION 0 Figure 7-2 Core Plate Bolt and Aligner Pin Configuration NUT LOCK HEX NUT CORE SUPPORT SHROUD ALIGNER SHROUD SPHERICAL WASHERS 7.2 Scenario Descriptions
7.2.1 Scenario
1 Aligner pins are not included for this scenario. All vertical loading is supported by axial stretching of the core plate bolts. The horizontal loads imparted on the core plate are resisted by bending of the core plate bolts and by the friction between the core plate rim and the shroud ledge.7.2.2 Scenario 2 Aligner pins are included for this scenario. All vertical loading is supported by the axial stretching of the core plate bolts. The aligner pins cannot support a vertical load. The horizontal loads imparted on the core plate are resisted by the shearing of the aligner pins and by the friction between the core plate rim and the shroud ledge. The core plate bolts take only the vertical loads, not the lateral loads.BWRVIP-25 Appendix A determines the maximum of the horizontal loads calculated on all four aligner pins from the Finite Element (FE) model. Then the shear stress on a single aligner pin is calculated by applying this maximum horizontal load. [[12 NEDO-33618 -REVISION 0 7.2.3 Scenario 3 The difference between this scenario and Scenario 1 is the postulated complete failure of the weld between the stiffener beams and the rim. Aligner pins are not included for this scenario.All vertical loading is supported by axial stretching of the core plate bolts. The horizontal loads imparted on the core plate are resisted by bending of the core plate bolts and by the friction between the core plate rim and the shroud ledge.8.0 Analysis Results 8.1 Comparison of Core Plate Bolt Stresses to ASME Allowable Limits As stated in Section 3.0, this analysis shows that the VYNPS core plate bolts meet the ASME allowable stresses for the loading conditions and assumptions made for all three scenarios analyzed in BWRVIP-25 Appendix A (Reference 1). This analysis follows the BWRVIP-25 Appendix A example analysis with three differences:
- 1. This analysis uses plant-specific loading and geometry for VYNPS and ASME allowable limits consistent with the licensing basis.2. This analysis takes credit for a conservative amount of friction between the core plate rim and shroud ledge.3. Because this analysis does not have a plant-specific FE model, some calculations use scaled values from BWRVIP-25 data.Results for the Faulted Condition, which is the most limiting condition, have been included in Table 8-1.13 NEDO-33618
-REVISION 0 Table 8-1 Stresses Compared to ASME Allowable Limits (Faulted Condition) 11 14 NEDO-33618 -REVISION 0 9.0 Conclusion Including the effects of preload relaxation due to thermal effects and fluence for a 60-year plant life, this analysis shows that the VYNPS core plate bolts meet the ASME allowable stresses for the most limiting load combinations and loads for all three scenarios analyzed in BWRVIP-25 Appendix A (Reference 1).10.0 References
- 1. EPRI, "BWR Core Plate Inspection and Flaw Evaluation Guidelines," BWRVIP-25, December 1996.2. Updated Final Safety Analysis Report for VYNPS, Revision 24.3. 1965 American Society of Mechanical Engineers Boiler & Pressure Vessel Code Section III.4. EPRI, "Crack Growth Rates in Irradiated Stainless Steels in BWR Internal Components," BWRVIP-99, December 2001.5. R. Pathania, et al., "Crack Growth Rates in Irradiated Stainless Steels in BWR Internals," 141h International Conference on Environmental Degradation of Materials in Nuclear Power Systems, August 23-27, 2009, Virginia Beach, VA.6. GE Nuclear Energy, "Safety Analysis Report for Vermont Yankee Nuclear Power Station Constant Pressure Power Uprate," NEDC-33090P, Revision 0, September 2003.7. EPRI, "Jet Pump Repair Design Criteria," BWR VIP-5 1-A, September 2005.8. GE Hitachi Nuclear Energy, "Dynamic, Load-Drop and Thermal-Hydraulic Analyses for ESBWR Fuel Racks," NEDO-33373-A, Revision 5, September 2010.9. U.S. NRC, "Calculational and Dosimetry Methods for Determining Pressure Vessel Neutron Fluence," Regulatory Guide 1.190, March 2001.15}}