ML19023A327: Difference between revisions

From kanterella
Jump to navigation Jump to search
(StriderTol Bot change)
(StriderTol Bot change)
 
Line 18: Line 18:
=Text=
=Text=
{{#Wiki_filter:'>
{{#Wiki_filter:'>
NRC FORM 618                                                                                                             U.S. NUCLEAR REGULATORY COMMISSION (8-2000) 10 CFR 71 CERTIFICATE OF COMPLIANCE FOR RADIOACTIVE MATERIAL PACKAGES
NRC FORM 618 U.S. NUCLEAR REGULATORY COMMISSION (8-2000) 10 CFR 71 CERTIFICATE OF COMPLIANCE
: 1. a. CERTIFICATE NUMBER                             b. REVISION NUMBER   c. DOCKET NUMBER               d. PACKAGE IDENTIFICATION NUMBER PAGE       PAGES 9372                                   1 2                71-9372                     USA/9372/B(U)F-96               1 OF     9
: 1.
: 2. PREAMBLE
FOR RADIOACTIVE MATERIAL PACKAGES
: a. CERTIFICATE NUMBER
: b. REVISION NUMBER
: c. DOCKET NUMBER
: d. PACKAGE IDENTIFICATION NUMBER PAGE PAGES 9372 1
71-9372 USA/9372/B(U)F-96 1
OF 9
: 2.
PREAMBLE
: a. This certificate is issued to certify that the package (packaging and contents) described in Item 5 below meets the applicable safety standards set forth in Title 10, Code of Federal Regulations, Part 71, "Packaging and Transportatio*n of Radioactive Material."
: a. This certificate is issued to certify that the package (packaging and contents) described in Item 5 below meets the applicable safety standards set forth in Title 10, Code of Federal Regulations, Part 71, "Packaging and Transportatio*n of Radioactive Material."
: b. This certificate does not relieve the consignor from compliance with any requirement of the regulations of the U.S. Department of Transportation or other applicable regulatory agencies, including the government of any country through or into which the package will be transported.
: b. This certificate does not relieve the consignor from compliance with any requirement of the regulations of the U.S. Department of Transportation or other applicable regulatory agencies, including the government of any country through or into which the package will be transported.
: 3. THIS CERTIFICATE IS ISSUED ON THE BASIS OF A SAFETY ANALYSIS REPORT OF THE PACKAGE DESIGN OR APPLICATION
: 3.
: a.         ISSUED TO (Name and Address)                                           b. TITLE AND IDENTIFICATION OF REPORT OR APPLICATION Framatome, Inc.                                                           Framatome TN-81 Safety Analysis Report, FS1-2101 Horn Rapids Rd.                                                      0014159, Revision No. 8, dated March 27, 2018.
THIS CERTIFICATE IS ISSUED ON THE BASIS OF A SAFETY ANALYSIS REPORT OF THE PACKAGE DESIGN OR APPLICATION
: a.
ISSUED TO (Name and Address)
Framatome, Inc.
2101 Horn Rapids Rd.
Richland, WA 99354
Richland, WA 99354
: b. TITLE AND IDENTIFICATION OF REPORT OR APPLICATION Framatome TN-81 Safety Analysis Report, FS1-0014159, Revision No. 8, dated March 27, 2018.
: 4. CONDITIONS This certificate is conditional upon ful911ing the requirements of 10 CFR Part 71, as applicable, and the. '~nditions specified below.
: 4. CONDITIONS This certificate is conditional upon ful911ing the requirements of 10 CFR Part 71, as applicable, and the. '~nditions specified below.
5.
: 5.
(a)         Packaging (1) Model No.: TN-81 (2) Description                                                                             -_-,i
(a)
                                      ~               *f ,' ~     '  / .: '',!    ' '    \   ' ~ *., :./_,. J / //<;(       -. J The Model No. TN-81 pa:c~age isi;:i .rectangular ~oXi j'l:'42 tl'Jt'i1 (:2,~:21 in)hjgh by 720 mm (28.35 in) wide by 5,068 mm (199.q3;.in) long, d~sigried fbt the trarispprt of unirrpdiated fuel assemblies or individual fu,~I rods with an ""enrichmeint up to .5:0 weight percent U-~35. The package carries a maximum of (i) two Boilin~)J\.l,9t:~t Reactor(B\Jy,~) fuel asi;H~mblies or ,Jn&#xa2;ividual rods, meeting the ASTM C996-96 st,andard of enrig_tied*9Ph1m-~r;cial grade ~*ranium, &sect;!Jlriched reprocessed uranium, or (ii) uranium oxitj,13 generic pressurizeCl)N'a~~f-:;reactor (PWR) or l:.lfs;ihium carbide loose fuel rods in a 5 inch diameter stainless steel pipe.' !i, *                                                      ,
Packaging (1) Model No.: TN-81 (2) Description  
with residual contamination The package is comprised of one inner container and one outer container both made of stainless steel. The inner container has aaouble-wa[LstainlesE; steel sheet structure with an alumina silicate thermal insulator, filling the gap betweel'l the two walls, to reduce the flow of the heat into the contents in the, event of a fire. Foam polyethylene cushioning material is placed on the inside of the inner container for protection of the fuel assembly.
-_-,i  
~
* f  
,' ~  
/  
\\  
' ~ *.,
:./_,.
J  
/ //<;(
J The Model No. TN-81 pa:c~age isi;:i.rectangular ~oXi j'l:'42 tl'Jt'i1 (:2,~:21 in)hjgh by 720 mm (28.35 in) wide by 5,068 mm (199.q3;.in) long, d~sigried fbt the trarispprt of unirrpdiated fuel assemblies or individual fu,~I rods with an ""enrichmeint up to.5:0 weight percent U-~35. The package carries a maximum of (i) two Boilin~)J\\.l,9t:~t Reactor(B\\Jy,~) fuel asi;H~mblies or,Jn&#xa2;ividual rods, meeting the ASTM C996-96 st,andard of enrig_tied*9Ph1m-~r;cial grade ~*ranium, &sect;!Jlriched reprocessed uranium, or (ii) uranium oxitj,13 generic pressurizeCl)N'a~~f-:;reactor (PWR) or l:.lfs;ihium carbide loose fuel rods in a 5 inch diameter stainless steel pipe.' !i, The package is comprised of one inner container and one outer container both made of stainless steel. The inner container has aaouble-wa[LstainlesE; steel sheet structure with an alumina silicate thermal insulator, filling the gap betweel'l the two walls, to reduce the flow of the heat into the contents in the, event of a fire. Foam polyethylene cushioning material is placed on the inside of the inner container for protection of the fuel assembly.
The outer container is comprised of a stainless steel angular framework covered with stainless steel plates. Inner container clamps are installed inside the outer container with damping devices to minimize vibrations during transport. Wood and honeycomb resin-impregnated kraft paper act as shock absorbers. The fuel rod clad and ceramic nature of the fuel pellets provide primary containment of the radioactive material.
The outer container is comprised of a stainless steel angular framework covered with stainless steel plates. Inner container clamps are installed inside the outer container with damping devices to minimize vibrations during transport. Wood and honeycomb resin-impregnated kraft paper act as shock absorbers. The fuel rod clad and ceramic nature of the fuel pellets provide primary containment of the radioactive material.
with residual contamination 2


NRC FORM 618                                                                                                   U.S. NUGLEAR REGULATORY COMMISSION (8-2000) 10 CFR 71 CERTIFICATE OF COMPLIANCE FOR RADIOACTIVE MATERIAL PACKAGES
NRC FORM 618 U.S. NUGLEAR REGULATORY COMMISSION (8-2000) 10 CFR 71 CERTIFICATE OF COMPLIANCE FOR RADIOACTIVE MATERIAL PACKAGES
: 1. a. CERTIFICATE NUMBER                 b. REVISION NUMBER   c. DOCKET NUMBER           d. PACKAGE IDENTIFICATION NUMBER   PAGE        PAGES 9372                           1               71-9372                   USA/9372/B(U)F-96                 2  OF    9 5.(a)(2) continued The approximate di.mensions and weights of the package are as follows:
: 1.
Maximum gross shipping weight                         1,614 kg (3,558 lbs)
: a. CERTIFICATE NUMBER
Maximum weight of inner container                    308 kg (679 lbs)
: b. REVISION NUMBER
Maximum weight of outer container                    622 kg (1,371 lbs)
: c. DOCKET NUMBER
Maximum weight of packaging                          930 kg (2,050 lbs)
: d. PACKAGE IDENTIFICATION NUMBER 9372 1
Dimensions of inner container Length                                        4,686 mm (184.49 in)
71-9372 USA/9372/B(U)F-96 5.(a)(2) continued The approximate di.mensions and weights of the package are as follows:
Width                                        459 mm (18.07 in)
(3) Drawings Maximum gross shipping weight Maximum weight of inner container Maximum weight of outer container Maximum weight of packaging Dimensions of inner container Length Width Height Dimensions of outer contaf ner Length Width.
* Height                                        286 mm (11.26 in)
. Height 1,614 kg (3,558 lbs) 308 kg (679 lbs) 622 kg (1,371 lbs) 930 kg (2,050 lbs) 4,686 mm (184.49 in) 459 mm (18.07 in) 286 mm (11.26 in)  
Dimensions of outer contafner Length                                      '5;968 mm (199.53 in)
'5;968 mm (199.53 in) 720 h:im (48.35 in) 742 mm (?c&sect;,21 in)  
Width .                                      720 h:im (48.35 in)
,,/.,
                                      . Height                                        742 mm (?c&sect;,21 in)
This packagingJis constructed in accordancef\\Nith the TN:::B~ Drawing No&sect;.:
                                                                                                      ,,/ .,
~  
(3) Drawings This packagingJis constructed in accordancef\Nith the TN:::B~
.....,~
                                                                                  ~   ..... ,~
Outer Conlainer Drawings.
Drawing      No&sect;.:
105E37.37, Rev. 6,.
Outer Conlainer Drawings .
105E3738,.sheets 1 9..nd 2, Rev. '8 105E373-8; sheet3,.Rev. 7 **
105E37.37, Rev. 6 ,.            . .
105E3739,...~Rev. 4 *.
105E3738, .sheets 1 9..nd 2, Rev. '8 105E373-8; sheet3,.Rev. 7
105E37 40r Rev. 4 105E3741,\\Rev. 1 105E3742, Rev~3 105E37 43, R'ev; '5.
* 105E3739,...~Rev. 4 *.
02-9162717, Rev,11 Inner. Container Drawings 105E3745, sheets 1-4, Rev; 8 105E3746, Rev. 1 105E3747, Rev. 4 105E37 48, Rev. 2 02-9162722, Rev. 1  
* 105E3740r Rev. 4 105E3741,\Rev. 1                                                                     *_/
*_/
105E3742, Rev~3 105E3743, R'ev; '5.
Co.ntents Containers 105E3773, Rev. 1 0028898, Rev. 1 PAGE PAGES 2
02-9162717, Rev,11 Inner. Container Drawings                           Co.ntents Containers 105E3745, sheets 1-4, Rev; 8                         105E3773, Rev. 1 105E3746, Rev. 1                                    0028898, Rev. 1 105E3747, Rev. 4 105E37 48, Rev. 2 02-9162722, Rev. 1
OF 9


NRG FORM 618                                                                                                         U.S. NUCLEAR RE'GULATORY COMMISSION (8-2000) 10 CFR 71 CERTIFICATE OF COMPLIANCE FOR RADIOACTIVE MATERIAL PACKAGES
NRG FORM 618 U.S. NUCLEAR RE'GULATORY COMMISSION (8-2000) 10 CFR 71 CERTIFICATE OF COMPLIANCE FOR RADIOACTIVE MATERIAL PACKAGES
: 1. a. CERTIFICATE NUMBER                 b. REVISION NUMBER c. DOCKET NUMBER                     d. PACKAGE IDENTIFICATION NUMBER   PAGE       PAGES 9372                             1             71-9372                           USA/9372/B(U)F-96                   3 OF    9
: 1.
: a. CERTIFICATE NUMBER
: b. REVISION NUMBER
: c. DOCKET NUMBER
: d. PACKAGE IDENTIFICATION NUMBER PAGE 9372 1
71-9372 USA/9372/B(U)F-96 3
: 5. continued (b) Co.ntents
: 5. continued (b) Co.ntents
( 1)" Type and form of material Enriched commercial grade uranium or enriched reprocessed uranium, as defined in ASTM C996-96, uranium oxide or uranium carbide fuel rods enriched to no more than 5.0 weight percent U-235, with limits specified in Tables 1 and 2 below.
( 1 )" Type and form of material Enriched commercial grade uranium or enriched reprocessed uranium, as defined in ASTM C996-96, uranium oxide or uranium carbide fuel rods enriched to no more than 5.0 weight percent U-235, with limits specified in Tables 1 and 2 below.
Table 1: Maximum weight of uranium dioxide pellets per fuel assembly
Table 1: Maximum weight of uranium dioxide pellets per fuel assembly  
                                                                        ':3 Type 8x8 fuel             ~ype 9x9 fuel             Type 10~10 fuel                               Type 11 x11 fuel assembiy             '    assembly                       assernbl'y                             assembly 235 kg                       240 kg                       275 kg                                 281 kg Table 2: Maximum Authorized           Conc;entr~fi_dns
':3 Type 8x8 fuel  
_Isotope                   Maxim1.~:m                 content
~ype 9x9 fuel Type 10~10 fuel Type 11 x11 fuel assembiy assembly assernbl'y assembly 235 kg 240 kg 275 kg 281 kg Table 2: Maximum Authorized Conc;entr~fi_dns
                                                                                          ...    )
_Isotope Maxim1.~:m content I\\
I\
LJ.*232  
LJ.*232                       2:00.<><'
... )
10-9J g/gU i   )'j                   -',>'  '
2:00.<><' 10-9 g/gU J
x19 g/gU J         .'.'
i  
                                                    !:J-235                       5.00
)'j J  
                                  , , _ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _'";,,.,..,..-1_,                    ,
!:J-235 5.00 x 19 g/gU,
                                                , U-236                         -2.50 X 10-2 g/gU
'";,,.,..,..-1_,  
                                                          .':; //
, U-236 U-238 Np-237 Pu".'238 Pu-239 Pu-240 Gamma Emitters
5                                            I U-238                    Balance of Uranium           . ,, .,,,
//
Np-237                        1.66 x           10-~ 9}9 u Pu".'238                      6.2-Q x 10-11 g/gU Pu-239                        3.04 x *10-9 g/gU Pu-240                        3.04 x 10-9 g/gU Gamma                        5.18.x 105 MeV-Emitters                                Bq/kgU Maximum content of U-238 is 9.23 x 10-19/gU for a maximum U-235 concentration of 5%. Since, for concentrations less than 5%, ttie U238 value will be higher, it is shown as "Balance of Uranium" in Table 2.
-2.50 X 10-2 g/gU 5
I Balance of Uranium 1.66 x 10-~ 9}9u 6.2-Q x 10-11 g/gU 3.04 x *10-9 g/gU 3.04 x 10-9 g/gU 5.18.x 105 MeV-Bq/kgU OF Maximum content of U-238 is 9.23 x 10-19/gU for a maximum U-235 concentration of 5%. Since, for concentrations less than 5%, ttie U238 value will be higher, it is shown as "Balance of Uranium" in Table 2.
PAGES 9


NRC FORM 618                                                                                           U.S. NUCLEAR REGULATORY COMMISSION (8-2000) 10 CFR71 CERTIFICATE OF COMPLIANCE FOR RADIOACTIVE MATERIAL PACKAGES
NRC FORM 618 U.S. NUCLEAR REGULATORY COMMISSION (8-2000) 10 CFR71 CERTIFICATE OF COMPLIANCE FOR RADIOACTIVE MATERIAL PACKAGES
: 1. a. CERTIFICATE NUMBER                   b. REVISION NUMBER   c. DOCKET NUMBER     d. PACKAGE IDENTIFICATION NUMBER P.AGE     PAGES 9372                         1               71-9372             USA/93 72/B( U)F-96             4 OF   9 5.(b)(1) continued (i) 8 x 8 fuel assemblies comprised of 60 to 64 rods in a square array with a maximum active fuel rod length of 381 cm. The maximum pellet diameter, minimum clad thickness, rod pitch, water rod and poisori rod specifications are- in accordance with Table 3 below.
: 1.
: a. CERTIFICATE NUMBER
: b. REVISION NUMBER
: c. DOCKET NUMBER
: d. PACKAGE IDENTIFICATION NUMBER P.AGE 9372 1
71-9372 USA/93 72/B( U )F-96 4
OF 5.(b)(1) continued (i) 8 x 8 fuel assemblies comprised of 60 to 64 rods in a square array with a maximum active fuel rod length of 381 cm. The maximum pellet diameter, minimum clad thickness, rod pitch, water rod and poisori rod specifications are-in accordance with Table 3 below.
(ii) 9 x 9 fuel assemblies comprised of 72 to 81 rods in a square array with a maximum active fuel rod length of 381 cm. The maximum pellet diameter, minimum clad thickness, rod pitch, water rod and poison rod specifications are in accordance with Table 3 below.
(ii) 9 x 9 fuel assemblies comprised of 72 to 81 rods in a square array with a maximum active fuel rod length of 381 cm. The maximum pellet diameter, minimum clad thickness, rod pitch, water rod and poison rod specifications are in accordance with Table 3 below.
(iii) 10 x 10 fuel assemblies comprised of 91to100 rods in a square array with a maximum active fuel rod length of 385 cm. The, maximum pellet diameter, minimum clad thickness, rod pitch, water rod and poison rod specifications ar1;3 in accordance wJth Table 3 below.
(iii) 10 x 10 fuel assemblies comprised of 91to100 rods in a square array with a maximum active fuel rod length of 385 cm. The, maximum pellet diameter, minimum clad thickness, rod pitch, water rod and poison rod specifications ar1;3 in accordance wJth Table 3 below.  
                                                        >  \
\\
(iv) 11 x 11 fuel assemblies c:;omprised of 112 rods in a square array with a maximum active fuel rod length of 385 cm. The maximum pellet diameter, minimyrxi clad thickness, rod pitch, water rod and .poison rod specifications are in accordance with Table 4 below.
(iv) 11 x 11 fuel assemblies c:;omprised of 112 rods in a square array with a maximum active fuel rod length of 385 cm. The maximum pellet diameter, minimyrxi clad thickness, rod pitch, water rod and.poison rod specifications are in accordance with Table 4 below.
(v) Uranium oxide fuel:rods configured loose, in a 5 inch diameter schedule 40 stainless steel pipe/prote,ctiV.e case or str'%pped together. When fuel r~qfare pl~c&sect;"9 in polyethylene sleeves, ea&#xa2;h polyethylene sleeve shall not excE?e'd 0.0152 cm in thickness. The maximum pellet diameter, minimum clad thickress, ~r,id rod spedflcations are in accordance with Table 5 below.                           *      *                ;
(v) Uranium oxide fuel:rods configured loose, in a 5 inch diameter schedule 40 stainless steel pipe/prote,ctiV.e case or str'%pped together. When fuel r~qfare pl~c&sect;"9 in polyethylene sleeves, ea&#xa2;h polyethylene sleeve shall not excE?e'd 0.0152 cm in thickness. The maximum pellet diameter, minimum clad thickress, ~r,id rod spedflcations are in accordance with Table 5 below.  
                                                              ;<          ' .        .1 (vi) Uranium carbide or, generic PWRuranium bxidefuerfods qonfigured loose, in a 5 inch diameter ~cheddle 4d :stainless steel pipe.. When. fyel' ro~.~ *.~.re placed in polyethylene sleeves, each polyethylE:me slel&#xa2;Ye shall not e~@e,ed o.ql52 6m in thickness. The maximum pellet diameter, minimum clad thickness, and rod specifi69tibns are lh accordance with Table 5 below.
.1 (vi) Uranium carbide or, generic PWRuranium bxidefuerfods qonfigured loose, in a 5 inch diameter ~cheddle 4d :stainless steel pipe.. When. fyel' ro~.~ *. ~.re placed in polyethylene sleeves, each polyethylE:me slel&#xa2;Ye shall not e~@e,ed o.ql52 6m in thickness. The maximum pellet diameter, minimum clad thickness, and rod specifi69tibns are lh accordance with Table 5 below.
* l~.
PAGES 9
NRC FORM 618                                                                                                                                         U.S. NUCLEAR REGULATORY COMMISSION (8-2000) 10 CFR 71 CERTIFICATE OF COMPLIANCE FOR RADIOACTIVE MATERIAL PACKAGES
 
: 1. a. CERTIFICATE NUMBER                           b. REVISION NUMBER                     c. DOCKET NUMBER                 d. PACKAGE IDENTIFICATION NUMBER               PAGE     PAGES 9372                                       1                         71-9372                         USN9372/B(U)F-96                             5 OF  9 5.(b)(1) continued Table 3: Fuel Assembly Parameters (8x8, 9x9, 10x10)
l~.
Parameter                                            Units                 Type                       Type                            Type            Type Fuel Assembly Type                                    Rods                   8x8                         9x9                    FANP lOxlO          GNF 10xl0 U02 Density                                            %                  :S98%                       :S98%                          S98%              :S98%
NRC FORM 618 U.S. NUCLEAR REGULATORY COMMISSION (8-2000) 10 CFR 71 CERTIFICATE OF COMPLIANCE FOR RADIOACTIVE MATERIAL PACKAGES
Theoretical               Theoretical                    Theoretical        Theoretical Number of water rods*                                  #                  0,2x2                    0, 2-2x2                       0, 2-2x2          0, 2-2x2 off-center                    off-center          off-center diagonal, 3x3                 diagonal, 3x3      diagonal, 3x3 Number of fuel rods                                      #                  60- 64                    n-  81                      91 - 100            91 - 100 Fuel Rod OD                                            cm                2: 1.176                  2: 1.093                      2: 1.000            2: 1.010 Fuel Pellet OD                                        cm,                  ;Sl.Q5.,                .* :SO.Q,6                      s0.895              S0.895 Cladding Type                                                      Zirconium Alloy Zirconium Alloy Zirconium Alloy Zirconium Alloy Cladding ID                                            cm                 s 1.10                     s 1.02
: 1.
:::; 0.933         s 0.934 Cladding Thickness                                    cm                 2:0.038                   2: 0.036               ' .* 2: 0.033             2: 0.038 Active fuel length                                      cm                   S381                                                                         S385 Nominal Fuel Rod Pitch -                                cm                   1.63                     < 1 45
: a. CERTIFICATE NUMBER
                                                                                                                                -~*
: b. REVISION NUMBER
                                                                                                                                    ,;; ...,_ ;   s 1:30_.
: c. DOCKET NUMBER
                                                                                                                                                  -                    1.30 U-235 Pellet Enrichment ** *                        \
: d. PACKAGE IDENTIFICATION NUMBER PAGE 9372 1
wt% .
71-9372 USN9372/B(U)F-96 5
                                                                                        ;S;5.0                                                                       ;S;5.0 Maximum Lattice Average  ..
5.(b)(1) continued Parameter Fuel Assembly Type U02 Density Number of water rods*
Enrichment            wt%                   ;S;5;0 .                                                                     ;S;5.0 Channel Thicknessh **      ..                ...    *cm            . 0.11 --:.o:.so48                                       0.17-0.3048           0.17 :__ 0.3048
Number of fuel rods Fuel Rod OD Fuel Pellet OD Cladding Type Cladding ID Cladding Thickness Active fuel length Nominal Fuel Rod Pitch -''
                                                                ..            I Partial Length Fuel Rods; (113 through 2/3 normaUength)                                                                                                            14 ....           14 Gadolinia Requirements Lattice Average Enri~hmentc                              -#~ .,','                       ,1., ' \' __;-         "
U-235 Pellet Enrichment **
:S 5.0 wt% U-235                                    @,wt%               7@*2:wt%             .* 10'@2wtY. ' >i2@2wt%                              .12@2wt%
* Maximum Lattice Average Enrichment Channel Thicknessh **
:S 4. 7 wt% U-235                                    ('Jd203 . ~@ 2 wt%' ' '                         8 @ 2 wt% ;'. / 12@ 2 wt%                         12@2 wt%
Partial Length Fuel Rods; (113 through 2/3 normaUength)
:S 4.6 wt% U-235                                                          .6@'2 wt%                 .8 @2wt%'                     10 @:2'"Wt%          10@2 wt%
Gadolinia Requirements Lattice Average Enri~hmentc
:S 4.3 wt% U-235                                            - *. * ***6.@?z:wt%                 **s.'@2wtfYo                     9@2*.~t%            9@2wt%
:S 5.0 wt% U-235
:S 4.2 wt% U-235                                                          .6~_w;.i m~:*~>"           6 @2 wt%
:S 4. 7 wt% U-235
8 iWi%              8@2wt%
:S 4.6 wt% U-235
_::: 4.1 wt% U-235                                                        4@2wt%\~::
:S 4.3 wt% U-235
* 6@2 W't%                       3"@2 wt%            8@2wt%
:S 4.2 wt% U-235
_::: 3.9 wt% U-235                                                        4@'.2Wt%''               6@2wt%                       1)@2 wt%              6@2wt%
_::: 4.1 wt% U-235
_::: 3.8 wt% U-235                                                      4 @ 2 \'vt%               4 @ 2 wt% . ', -6 @ 2 wt%                          6@2wt%
_::: 3.9 wt% U-235
        .:S 3.7 wt% U-235                                                        2 @ 2 wt%                 4 @ 2 wt%\;< . 6 @ 2 wt%                          6@2wt%
_::: 3.8 wt% U-235
:S 3.6 wt% U-235                                                          2 @ 2 wt%                 4 @ 2Vwt% ',* 4 @ 2 wt%                            4@2wt%
.:S 3.7 wt% U-235
_::: 3.5 wt% U-235                                                        ~@.2wtY,,
:S 3.6 wt% U-235
* 2*@Q...wt%                     4@2wt%               4@2wt%
_::: 3.5 wt% U-235
        .:S 3.3 wt% U-235                                                        2@fWi%                 . 2@2wt%                         2@2wt%               2@2wt%
.:S 3.3 wt% U-235
        .:S 3.1 wt% U-235                                                            None                  2 @ 2 wt%                     2 @ 2 wt%           2@2wt%
.:S 3.1 wt% U-235
_::: 3.0 wt% U-235                                                            None                      None                      2@2wt%               2@2wt%
_::: 3.0 wt% U-235 s 2.9 wt% U-235 Polyethylene Equivalent Massd (Maximum per Assembly)
s    2.9 wt% U-235                                                          None                       None                          None              None Polyethylene Equivalent Massd (Maximum per Assembly)                                  kg                      11                        11                          10.2              10.2
Table 3: Fuel Assembly Parameters (8x8, 9x9, 10x10)
: a.     For 8 x 8 fuel assembly designs, there can be either 0 or I water rod; the water rod location occupies a space equivalent to 2 x 2 fuel rods. This is designated as 0, 2 x 2 in the table, For 9 x 9 and 10 x 10 fuel assembly designs, there can be either 0, 1, or 2 water rods in the assembly; the water rod location occupies a space equivalent to (i) two 2 x 2 fuel rod*equivalent spaces on a diagonal at the center of the assembly, or (ii) one 3 x 3 fuel rod equivalent space (9 fuel rods space) in the center of the assembly.
Units Type Rods 8x8
:S98%
Theoretical 0,2x2 60- 64 cm 2: 1.176 cm,
;Sl.Q5.,
Type 9x9
:S98%
Theoretical 0, 2-2x2 off-center diagonal, 3x3 n-81 2: 1.093
.* :SO.Q,6 Type FANP lOxlO S98%
Theoretical 0, 2-2x2 off-center diagonal, 3x3 91 - 100 2: 1.000 s0.895 Type GNF 10xl0
:S98%
Theoretical 0, 2-2x2 off-center diagonal, 3x3 91 - 100 2: 1.010 S0.895 Zirconium Alloy Zirconium Alloy Zirconium Alloy Zirconium Alloy cm s 1.10 s 1.02
:::; 0.933 s 0.934 cm 2:0.038 2: 0.036  
'.* 2: 0.033 cm S381 cm 1.63  
< 1 45  
-~*,;;..., __ ; s 1:30_.
wt%  
;S;5.0  
\\
wt%  
;S;5;0.  
. 0.11 --:.o:.so48  
*cm 0.17-0.3048 I
14....  
-#~..,','  
,., ' \\' __ ;-
@,wt%
7@*2:wt%
1
.* 10'@2wtY. ' >i2@2wt%
('Jd203  
. ~@ 2 wt%' ' '
8 @ 2 wt% ;'. / 12@ 2 wt%
kg
.6@'2 wt%  
.8 @2wt%'
10 @:2'"Wt%  
- *. * ***6.@?z:wt%  
**s.'@2wtfYo 9@2*.~t%  
.6~_w;.i m~:*~>" 6 @2 wt%
8 iWi%
4@2wt%\\~::
* 6@2 W't%
3"@2 wt%
4@'.2Wt%''
6@2wt%
1)@2 wt%
4 @ 2 \\'vt%
4 @ 2 wt%. ', -6 @ 2 wt%
2 @ 2 wt%
4 @ 2 wt%\\;<.
6 @ 2 wt%
2 @ 2 wt%
4 @ 2Vwt% ',*
4 @ 2 wt%  
~@.2wtY,,
* 2*@Q...wt%
4@2wt%
2@fWi%  
. 2@2wt%
2@2wt%
None 2 @ 2 wt%
2 @ 2 wt%
None None 11 None 2@2wt%
None None 11 10.2 2: 0.038 S385 1.30
;S;5.0
;S;5.0 0.17 :__ 0.3048 14
.12@2wt%
12@2 wt%
10@2 wt%
9@2wt%
8@2wt%
8@2wt%
6@2wt%
6@2wt%
6@2wt%
4@2wt%
4@2wt%
2@2wt%
2@2wt%
2@2wt%
None 10.2
: a.
For 8 x 8 fuel assembly designs, there can be either 0 or I water rod; the water rod location occupies a space equivalent to 2 x 2 fuel rods. This is designated as 0, 2 x 2 in the table, For 9 x 9 and 10 x 10 fuel assembly designs, there can be either 0, 1, or 2 water rods in the assembly; the water rod location occupies a space equivalent to (i) two 2 x 2 fuel rod*equivalent spaces on a diagonal at the center of the assembly, or (ii) one 3 x 3 fuel rod equivalent space (9 fuel rods space) in the center of the assembly.
These configurations are designated as 0, 2 - 2x2 off-center diagonal, 3x3 in the table.
These configurations are designated as 0, 2 - 2x2 off-center diagonal, 3x3 in the table.
: b.       Transport with or without channels is acceptable
: b.
: c.       Required gadolinia rods must be distributed symmetrically along the major diagonal.
Transport with or without channels is acceptable
: d.       Polyethylene equivalent mass calculation per Section 6.3.2.2 of the application,
: c.
Required gadolinia rods must be distributed symmetrically along the major diagonal.
: d.
Polyethylene equivalent mass calculation per Section 6.3.2.2 of the application, PAGES OF 9


NRC FORM 618                                                                                                                               U.S. NUCLEAR REGULATORY COMMISSION (8-2000) 10 CFR71 CERTIFICATE OF COMPLIANCE FOR RADIOACTIVE MATERIAL PACKAGES
NRC FORM 618 U.S. NUCLEAR REGULATORY COMMISSION (8-2000) 10 CFR71 CERTIFICATE OF COMPLIANCE FOR RADIOACTIVE MATERIAL PACKAGES
: 1. a. CERTIFICATE NUMBER                           b. REVISION NUMBER       c. DOCKET NUMBER                 d. PACKAGE IDENTIFICATION NUMBER       PAGE        PAGES 9372                                     1                     71-9372                           USA/93 72/B(U)F-96                 6  OF    9 5.(b )( 1) continued Table 4: Fuel Assembly Parameters ( 11 x11)
: 1.
Parameter                             Units                                     Value Fuel Assembly Type                                   Rods                                       l lxl 1 U02 Density*                                         g/cm3                                   Sl0.763 Number of water rods                                     #                                  3x3 center Number of fuel rods                                     #                                            ll2 Fuel rod OD                                             cm                                     2:0.930 Fuel Pellet OD                                         cm                                     S0.820 Cladding Type                                                                       Zirconium Alloy Cladding ID                                             cm       .:.:_1 S0.840 Cladding Thickness                 .*                  cm                     "              2:0.045 Equivalent Nominal Ftiel Rod Pitch                     cm                                     :'=;l.195 U-235 Pellet Enrich~ent                               wt%                                         <S.O T
: a. CERTIFICATE NUMBER
Maximum L~lfic,e Average Enrichment                   wt%                                         S5J)
: b. REVISION NUMBER
Fuel Channei'Side-Thicknessh
: c. DOCKET NUMBER
                                          ;. }   ":>*. . ,
: d. PACKAGE IDENTIFICATION NUMBER 9372 1
cm                                  ,,,~0.~54 Full Length Fuel Rods Quantity                                         #                                            92 Active Length                                   cm                                       S385 Short Part Length Fuel Rods .
71-9372 USA/93 72/B(U)F-96 5.(b )( 1) continued Table 4: Fuel Assembly Parameters ( 11 x11)
                                      .Quantity                                         #                                            12 Active Length                                   cm                                     Sl55.l Long Part Length Fuel Rods                                                     ,_ ~
Parameter Units Fuel Assembly Type Rods U02 Density*
                                    *:Quantity                                         #                                      . :.. 8'            '
g/cm3 Number of water rods Number of fuel rods Fuel rod OD cm Fuel Pellet OD cm Cladding Type Cladding ID cm.:.:_1 Cladding Thickness cm Equivalent Nominal Ftiel Rod Pitch cm U-235 Pellet Enrich~ent wt%
Active Length:                                 cm                                   '. :5?~~6.8 Gadolinia RequirementsLattice                   .                        ,.                      ,...
Maximum L~lfic,e Average Enrichment wt%
Average Enrichment" S 5.0 wt% U~235                                             \,;                         13 @2 "'.!.% .*
Fuel Channei'Side-Thicknessh cm
I S 4.8 wt% Uc235                                                                         12@2 wt.%
;..}
s 4.6 wt% U-~i\S   .                                                                   11 @2~%
Full Length Fuel Rods Quantity Active Length cm Short Part Length Fuel Rods.  
. Quantity Active Length cm Long Part Length Fuel Rods  
*:Quantity Active Length:
cm Gadolinia RequirementsLattice Average Enrichment" S 5.0 wt% U~235  
\\,;
S 4.8 wt% Uc235 I
s 4.6 wt% U-~i\\S.
S 4.4 wt% U-235
S 4.4 wt% U-235
* i 10@2 wt%
* i S 4.2 wt% U-235
S 4.2 wt% U-235
* S 4.1 wt% U-235 S 3.9 wt% U-235  
* 9@2wt%
#@wt%
S 4.1 wt% U-235                                                                         .~@2wt%
S 3.8 wt% U-235 Gd203 S 3.6 wt% U-235 S 3.5 wt% U-235 S 3.3 wt% U-235 S 3.2 wt% U-235
S 3.9 wt% U-235                                   #@wt%                                 7@2wt%
::; 2.9 wt% U-235 Polyethylene Equivalent Mass kg
S 3.8 wt% U-235                               '       Gd203                .)'
!(Maximum per Assembly)d
: a. Density based on a pellet modeled as a right cylinder
. b. Transport with or without channels is acceptable.
Value l lxl 1 Sl0.763 3x3 center ll2 2:0.930 S0.820 Zirconium Alloy S0.840 2:0.045
:'=;l.195
<S.O T
S5J)
,,,~0.~54 92 S385 12 Sl55.l
~
. :.. 8'  
' :5?~~6.8 13 @2 "'.!.%.*
12@2 wt.%
11 @2~%
10@2 wt%
9@2wt%
.~@2wt%
7@2wt%
.)'
6@2wt%
6@2wt%
S 3.6 wt% U-235                                                                          5@2wt%
5@2wt%
S 3.5 wt% U-235                                                                          4@2wt%.
4@2wt%.
S 3.3 wt% U-235                                                                          3@2wt%
3@2wt%
S 3.2 wt% U-235                                                                          2@2wt%
2@2wt%
::; 2.9 wt% U-235                                                                                None Polyethylene Equivalent Mass                            kg                                      10.2
None 10.2 PAGE 6
                            !(Maximum per Assembly)d
OF
: a. Density based on a pellet modeled as a right cylinder
                    . b. Transport with or without channels is acceptable.
: c. Required gadolinia rods must be distributed symmetrically along the major diagonal, and shall not be placed on the periphery.
: c. Required gadolinia rods must be distributed symmetrically along the major diagonal, and shall not be placed on the periphery.
: d. Refer to Section 6.3.2.2 of the application.
: d. Refer to Section 6.3.2.2 of the application.
PAGES 9


NRC FORM 618                                                                                                                                             U.S. NUCLEAR REGULATORY COMMISSION (B-2000) 10CFR71 CERTIFICATE OF COMPLIANCE FOR RADIOACTIVE MATERIAL PACKAGES
NRC FORM 618 U.S. NUCLEAR REGULATORY COMMISSION (B-2000) 10CFR71 CERTIFICATE OF COMPLIANCE FOR RADIOACTIVE MATERIAL PACKAGES
: 1. a. CERTIFICATE NUMBER                           b. REVISION NUMBER                   c. DOCKET NUMBER                   d. PACKAGE IDENTIFICATION NUMBER                   PAGE         PAGES 9372                                         1                           71-9372                             USA/9372/B(U)F-96                                 7   OF   9 5.(b)(1) continued Table 5: Fuel Rod Paramet$rs Parameter           Units                                                                                 Type CANDU-                      CANDU-Fuel Assembly                     . 8x8                     9x9                   lOxlO                   llxll                                                                 Generic 14                       25 Type                         (U02)                 (U62)                   (U02)                     (U02)                                                               .PWR(U02)
: 1.
(UC)                       (UC)
: a. CERTIFICATE NUMBER
U02orUC g/cm3     ::.:10.14               sl0.74                 :Sl0.74                   Sl0.763                           :S13.36                   Sl3.36       Sl0.74 Fuel Density*
: b. REVISION NUMBER
Fuel rod OD           cm         2:1.10                 2:1.02                   2:1.00'               2:0.930                           2:1.340                   :.:o.996     2:1.118 Fuel Pellet OD         cm         Sl.05                 ~0.96.                   so.9o                   :S01820                         Sl.254                     s0.950       so.98 Zirc. Alloy                     Zirc. Alloy Zirc. Alloy Cladding Type                  Zirc. Alloy           Zirc. Alloy             Zirc. Alloy               Zirc. Alloy or'SS                       or SS       or SS Cladding ID           cm       Sl.10                   sI.02                  Sl.00                   .so.930                         <l.267*
: c. DOCKET NUMBER
                                                                                                                                              -*,.::._,,..'                s0.951       Sl.004 Cladding cm       :_:0.0.38               2:0.036               2:_0.038                   20.045               ~~*-
: d. PACKAGE IDENTIFICATION NUMBER PAGE PAGES 9372 1
                                                                                                                                      -*    ~0.033                       2:0.033     2:0.033 Thickness                         /
71-9372 USA/9372/B(U)F-96 7
                                                      "                                                                                                       - __ , ~~
OF 9
Active fuel Length       cm         <$81                 S381                   S385                       6385         "o['';~* S47.752                            S40.013       S450.
5.(b)(1) continued Table 5: Fuel Rod Paramet$rs Parameter Units Type Fuel Assembly  
Maximum U-235                                                                                                             .,
. 8x8 9x9 lOxlO llxll CANDU-CANDU-Generic 14 25 Type (U02)
wt.%      . S5.0                   S5.0                     <5.0                     s5.o        }                 S5.0                       S5.0        .::;5.0 Pellet Enrichment                                                                    ~1.:,__.
(U62)
(U02)
(U02)
(UC)
(UC)  
.PWR(U02)
U02orUC g/cm3
::.:10.14 sl0.74
:Sl0.74 Sl0.763
:S13.36 Sl3.36 Sl0.74 Fuel Density*
Fuel rod OD cm 2:1.10 2:1.02 2:1.00' 2:0.930 2:1.340
:.:o.996 2:1.118 Fuel Pellet OD cm Sl.05  
~0.96.
so.9o
:S01820 Sl.254 s0.950 so.98 Cladding Type Zirc. Alloy Zirc. Alloy Zirc. Alloy Zirc. Alloy Zirc. Alloy Zirc. Alloy Zirc. Alloy or'SS or SS or SS Cladding ID sI.02 cm Sl.10 Sl.00  
.so.930  
<l.267*
s0.951 Sl.004 Cladding cm
:_:0.0.38 2:0.036 2:_0.038 20.045  
~~*-
~0.033 2:0.033 2:0.033 Thickness  
/  
"o['';~* S47.752
- __, ~~
Active fuel Length cm  
<$81 S381 S385 6385 S40.013 S450.
Maximum U-235 wt.%
S5.0 s5.o S5.0 Pellet Enrichment
. S5.0  
<5.0  
}
S5.0  
.::;5.0  
~1.:,__.
:)
Maximum Average i
fuel rod wt.%
:s5.0 S5.0 s5.0 s5.o S5.0 S5.0 S5.0 Enrichment Loose Rod
-'/.
,l Configuration Freely Loose or S25
::;::25 S25
$5 NIA NIA NIA Strapped Together Packed in 5" SS l
Pipe or protective S22 S26
~o
:)
:)
i                                    -
S30 S74b Sl30&deg; S105b Case, i.e., SS Box  
Maximum Average fuel rod          wt.%      :s5.0                    S5.0              ..      s5.0                      s5.o                            S5.0                      S5.0        S5.0 Enrichment                                          .                ,>>!
.i with Lid  
                                                                                                                      -          ;       -'/.
~.
Loose Rod                                                                                                ..
l \\ *.
                                                                                                                    ,l Configuration                                                                                          ..,
: a. Density based on a pellet modpled as a right cylinder.
Freely Loose or                                                                                                                    "'
: b. Including partial rods -using dense packing of congruent rods-in the 5" SS pipe  
Strapped Together
                          #          S25                    ::;::25                  S25                      $5                            NIA                        NIA          NIA Packed in 5" SS
                                                                          '"                                            ..                                      l Pipe or protective                                                                                    :)
Case, i.e., SS Box
                          #          S22                    S26                      ~o                        S30                            S74b                      Sl30&deg;        S105b with Lid                                             '                              ~.
                                                                                      .il \ *.
: a. Density based on a pellet modpled as a right cylinder.                                                                    .
: b. Including partial rods -using dense packing of congruent rods- in the 5" SS pipe


NRC FORM 618                                                                                                 U.S. NUCLEAR REGULATORY COMMISSION (8-2000) 10CFR 71 CERTIFICATE OF COMPLIANCE FOR RADIOACTIVE MATERIAL PACKAGES
NRC FORM 618 U.S. NUCLEAR REGULATORY COMMISSION (8-2000) 10CFR 71 CERTIFICATE OF COMPLIANCE
: 1.      a. CERTIFICATE NUMBER                   b. REVISION NUMBER     c. DOCKET NUMBER       d. PACKAGE IDENTIFICATION NUMBER PAGE     PAGES 9372                             1                   71-9372             USA/9372/B(U)F-96               8 OF   9 5.(b)(2)         Maximum quantity of material per package Total weight of payload contents (fuel assemblies; or fuel rods, and rod shipping containers) not to exceed 684 kg (1508 pounds).
: 1.
(i) For the contents described in 5(b)(1)(i), 5(b)(1)(ii), 5(b)(1)(iii), and 5(b)(1)(iv): two fuel assemblies. .           *
FOR RADIOACTIVE MATERIAL PACKAGES
: a. CERTIFICATE NUMBER
: b. REVISION NUMBER
: c. DOCKET NUMBER
: d. PACKAGE IDENTIFICATION NUMBER PAGE 9372 1
71-9372 USA/9372/B(U)F-96 8
OF 5.(b)(2)
Maximum quantity of material per package Total weight of payload contents (fuel assemblies; or fuel rods, and rod shipping containers) not to exceed 684 kg (1508 pounds).
(i) For the contents described in 5(b)(1)(i), 5(b)(1)(ii), 5(b)(1)(iii), and 5(b)(1)(iv): two fuel assemblies..
(ii) For the contents described in 5(b)(1)(v) and 5(b)(1){vi): allowable number offuel rods per compartment (2 compartments per package).
(ii) For the contents described in 5(b)(1)(v) and 5(b)(1){vi): allowable number offuel rods per compartment (2 compartments per package).
(c) Criticality Safety Index, except for contents described in 5(b)(1)(vi) and limited in 5(b)(2)(li)                             '          1.0 Criticality Safety Index for cq.ntents described in 5(b)(1)(vi) and limited in'5(b)(2)(ii)
(c) Criticality Safety Index, except for contents described in 5(b)(1)(vi) and limited in 5(b)(2)(li) 1.0 Criticality Safety Index for cq.ntents described in 5(b)(1)(vi) and limited in'5(b)(2)(ii) 2.1
* 2.1
: 6. In addition to the requirements of Subpart G of 1 O CFR Part 71:
: 6. In addition to the requirements of Subpart G of 10 CFR Part 71:
(a) The package shall be prepared for shipment and operat~d in aCf?ordance wlth Chapter 7 of th.e application.
(a) The package shall be prepared for shipment and operat~d in aCf?ordance wlth Chapter 7 of th.e application.                                                               *
(b) The packaging ml1st meet the Acceptance Tests and M,ainten?nce Program,of Chapter 8 of the application.
(b) The packaging ml1st meet the Acceptance Tests and M,ainten?nce Program ,of Chapter 8 of the application.                                   *
( c) Prior to ~ach shipment, the fuel rods shall conform 'to the leak te.sts.and specjfic inspection techniques used for qualificatibn ahd ih".process inspections as d~flhed in Chapter 8. Stainless steel components of the packaging must be visually ihspected. Packages in which stainless steel components show Ritting corrq'$ion; cracking, or pinholes, are hot authorized for transport.  
( c) Prior to ~ach shipment, the fuel rods shall conform 'to the leak te.sts .and specjfic inspection techniques used for qualificatibn ahd ih".process inspections as d~flhed in Chapter 8. Stainless steel components of the packaging must be visually ihspected. Packages in which stainless steel components show Ritting corrq'$ion; cracking, or pinholes, are hot authorized for transport.
.~."  
                                  --                                '    <              .~ ."                 --
.t.\\,
:**-                    _._',    . .t.\, . .,.;'                    .* '
( d) If ~rapping is used on the unirradiated fuel ai~yem'~lies, their ends mu~t be assured to be open dunng transport.
(d) If ~rapping is used on the unirradiated fuel ai~yem'~lies, their ends mu~t be assured to be open dunng transport.              * .* .                    * **                        *  .
: 7. All fuel to be shipped must meet the maximum P(r/t) criterion-product of the pre-pressure and of the maximum *Inside Radius/Thickness-of 10.18653 MPa.. Shipment of 11 x11 fuel designs manufactured by other suppliers than Framatome is not authorized. ATRIUM 11x11 fuel shall contain only commercial grade uranium, i.e., cannot be made from down-blended low enrichment fuel or reprocessed uranium.
: 7. All fuel to be shipped must meet the maximum P(r/t) criterion-product of the pre-pressure and of the maximum *Inside Radius/Thickness- of 10.18653 MPa .. Shipment of 11 x11 fuel designs manufactured by other suppliers than Framatome is not authorized. ATRIUM 11x11 fuel shall contain only commercial grade uranium, i.e., cannot be made from down-blended low enrichment fuel or reprocessed uranium.
: 8. Cluster separators are optional and may be comprised of polyethylene or other plastics. Polyethylene or plastic mass limits shall be determined in accordance with Section 6.3.2.2 (Material Specifications) of the application.
: 8. Cluster separators are optional and may be comprised of polyethylene or other plastics. Polyethylene or plastic mass limits shall be determined in accordance with Section 6.3.2.2 (Material Specifications) of the application.
: 9. The package authorized by this certificate is hereby approved for use under the general license provisions of 10 CFR 71.17.
: 9. The package authorized by this certificate is hereby approved for use under the general license provisions of 10 CFR 71.17.
: 10. Transport by air of fissile material is not authorized.
: 10. Transport by air of fissile material is not authorized.
PAGES 9


NRC FORM 618                                                                           U.S. N.UCLEAR REGULATORY COMMISSION (8-2000)                                                                                     I 10 CFR71 CERTIFICATE OF COMPLIANCE FOR RADIOACTIVE MATERIAL PACKAGES
NRC FORM 618 U.S. N.UCLEAR REGULATORY COMMISSION (8-2000)
: 1. a. CERTIFICATE NUMBER         b. REVISION NUMBER   c. DOCKET NUMBER d. PACKAGE IDENTIFICATION NUMBER PAGE     PAGES 9372                   1                 71-9372       USA/93 72/B(U) F-96             9 OF  9 1
I 10 CFR71 CERTIFICATE OF COMPLIANCE FOR RADIOACTIVE MATERIAL PACKAGES
: 1.
: a. CERTIFICATE NUMBER
: b. REVISION NUMBER
: c. DOCKET NUMBER
: d. PACKAGE IDENTIFICATION NUMBER PAGE 9372 1
71-9372 U SA/93 72/B(U) F-96 9
: 11. Revision No. O of this certificate may be used until April 30, 2019.
: 11. Revision No. O of this certificate may be used until April 30, 2019.
: 12. Expiration date: April 30, 2019.
: 12. Expiration date: April 30, 2019.
REFERENCES Framatome TN-B1 Safety Analysis Report, FS1-0014159, Revision 8, dated March 27, 2018.
REFERENCES Framatome TN-B1 Safety Analysis Report, FS1-0014159, Revision 8, dated March 27, 2018.
and supplemental information submitted on January 23, 2019 F     THE U.S. r;9LEAR REGULATORY COMMISSION
F THE U.S. r;9LEAR REGULATORY COMMISSION  
                                                                /11-}
/11-}
McKirgan, Chief nt Fuel Licensing ranch''
Date: June<.J, 2018 McKirgan, Chief nt Fuel Licensing ranch''
Division of Spent Fuel Management Office of Nuclear Material $afe.fy * *.
Division of Spent Fuel Management Office of Nuclear Material $afe.fy *
* and Safeguards             *
* and Safeguards  
* Date: June<.J, 2018 TBD
.J  
                                                                                        .J
/< /
                                                                                          /< /}}
PAGES OF 9
1 TBD and supplemental information submitted on January 23, 2019}}

Latest revision as of 05:57, 5 January 2025

Framatome Inc., Certificate of Compliance No. 9372
ML19023A327
Person / Time
Site: 07109372
Issue date: 01/23/2019
From: John Mckirgan
Spent Fuel Licensing Branch
To:
Framatome
Shared Package
ML19023A325 List:
References
TJT:19:004, USA/9372/B(U)F-96
Download: ML19023A327 (9)


Text

'>

NRC FORM 618 U.S. NUCLEAR REGULATORY COMMISSION (8-2000) 10 CFR 71 CERTIFICATE OF COMPLIANCE

1.

FOR RADIOACTIVE MATERIAL PACKAGES

a. CERTIFICATE NUMBER
b. REVISION NUMBER
c. DOCKET NUMBER
d. PACKAGE IDENTIFICATION NUMBER PAGE PAGES 9372 1

71-9372 USA/9372/B(U)F-96 1

OF 9

2.

PREAMBLE

a. This certificate is issued to certify that the package (packaging and contents) described in Item 5 below meets the applicable safety standards set forth in Title 10, Code of Federal Regulations, Part 71, "Packaging and Transportatio*n of Radioactive Material."
b. This certificate does not relieve the consignor from compliance with any requirement of the regulations of the U.S. Department of Transportation or other applicable regulatory agencies, including the government of any country through or into which the package will be transported.
3.

THIS CERTIFICATE IS ISSUED ON THE BASIS OF A SAFETY ANALYSIS REPORT OF THE PACKAGE DESIGN OR APPLICATION

a.

ISSUED TO (Name and Address)

Framatome, Inc.

2101 Horn Rapids Rd.

Richland, WA 99354

b. TITLE AND IDENTIFICATION OF REPORT OR APPLICATION Framatome TN-81 Safety Analysis Report, FS1-0014159, Revision No. 8, dated March 27, 2018.
4. CONDITIONS This certificate is conditional upon ful911ing the requirements of 10 CFR Part 71, as applicable, and the. '~nditions specified below.
5.

(a)

Packaging (1) Model No.: TN-81 (2) Description

-_-,i

~

  • f

,' ~

/

\\

' ~ *.,

./_,.

J

/ //<;(

J The Model No. TN-81 pa:c~age isi;:i.rectangular ~oXi j'l:'42 tl'Jt'i1 (:2,~:21 in)hjgh by 720 mm (28.35 in) wide by 5,068 mm (199.q3;.in) long, d~sigried fbt the trarispprt of unirrpdiated fuel assemblies or individual fu,~I rods with an ""enrichmeint up to.5:0 weight percent U-~35. The package carries a maximum of (i) two Boilin~)J\\.l,9t:~t Reactor(B\\Jy,~) fuel asi;H~mblies or,Jn¢ividual rods, meeting the ASTM C996-96 st,andard of enrig_tied*9Ph1m-~r;cial grade ~*ranium, §!Jlriched reprocessed uranium, or (ii) uranium oxitj,13 generic pressurizeCl)N'a~~f-:;reactor (PWR) or l:.lfs;ihium carbide loose fuel rods in a 5 inch diameter stainless steel pipe.' !i, The package is comprised of one inner container and one outer container both made of stainless steel. The inner container has aaouble-wa[LstainlesE; steel sheet structure with an alumina silicate thermal insulator, filling the gap betweel'l the two walls, to reduce the flow of the heat into the contents in the, event of a fire. Foam polyethylene cushioning material is placed on the inside of the inner container for protection of the fuel assembly.

The outer container is comprised of a stainless steel angular framework covered with stainless steel plates. Inner container clamps are installed inside the outer container with damping devices to minimize vibrations during transport. Wood and honeycomb resin-impregnated kraft paper act as shock absorbers. The fuel rod clad and ceramic nature of the fuel pellets provide primary containment of the radioactive material.

with residual contamination 2

NRC FORM 618 U.S. NUGLEAR REGULATORY COMMISSION (8-2000) 10 CFR 71 CERTIFICATE OF COMPLIANCE FOR RADIOACTIVE MATERIAL PACKAGES

1.
a. CERTIFICATE NUMBER
b. REVISION NUMBER
c. DOCKET NUMBER
d. PACKAGE IDENTIFICATION NUMBER 9372 1

71-9372 USA/9372/B(U)F-96 5.(a)(2) continued The approximate di.mensions and weights of the package are as follows:

(3) Drawings Maximum gross shipping weight Maximum weight of inner container Maximum weight of outer container Maximum weight of packaging Dimensions of inner container Length Width Height Dimensions of outer contaf ner Length Width.

. Height 1,614 kg (3,558 lbs) 308 kg (679 lbs) 622 kg (1,371 lbs) 930 kg (2,050 lbs) 4,686 mm (184.49 in) 459 mm (18.07 in) 286 mm (11.26 in)

'5;968 mm (199.53 in) 720 h:im (48.35 in) 742 mm (?c§,21 in)

,,/.,

This packagingJis constructed in accordancef\\Nith the TN:::B~ Drawing No§.:

~

.....,~

Outer Conlainer Drawings.

105E37.37, Rev. 6,.

105E3738,.sheets 1 9..nd 2, Rev. '8 105E373-8; sheet3,.Rev. 7 **

105E3739,...~Rev. 4 *.

105E37 40r Rev. 4 105E3741,\\Rev. 1 105E3742, Rev~3 105E37 43, R'ev; '5.

02-9162717, Rev,11 Inner. Container Drawings 105E3745, sheets 1-4, Rev; 8 105E3746, Rev. 1 105E3747, Rev. 4 105E37 48, Rev. 2 02-9162722, Rev. 1

  • _/

Co.ntents Containers 105E3773, Rev. 1 0028898, Rev. 1 PAGE PAGES 2

OF 9

NRG FORM 618 U.S. NUCLEAR RE'GULATORY COMMISSION (8-2000) 10 CFR 71 CERTIFICATE OF COMPLIANCE FOR RADIOACTIVE MATERIAL PACKAGES

1.
a. CERTIFICATE NUMBER
b. REVISION NUMBER
c. DOCKET NUMBER
d. PACKAGE IDENTIFICATION NUMBER PAGE 9372 1

71-9372 USA/9372/B(U)F-96 3

5. continued (b) Co.ntents

( 1 )" Type and form of material Enriched commercial grade uranium or enriched reprocessed uranium, as defined in ASTM C996-96, uranium oxide or uranium carbide fuel rods enriched to no more than 5.0 weight percent U-235, with limits specified in Tables 1 and 2 below.

Table 1: Maximum weight of uranium dioxide pellets per fuel assembly

':3 Type 8x8 fuel

~ype 9x9 fuel Type 10~10 fuel Type 11 x11 fuel assembiy assembly assernbl'y assembly 235 kg 240 kg 275 kg 281 kg Table 2: Maximum Authorized Conc;entr~fi_dns

_Isotope Maxim1.~:m content I\\

LJ.*232

... )

2:00.<><' 10-9 g/gU J

i

)'j J

!:J-235 5.00 x 19 g/gU,

'";,,.,..,..-1_,

, U-236 U-238 Np-237 Pu".'238 Pu-239 Pu-240 Gamma Emitters

//

-2.50 X 10-2 g/gU 5

I Balance of Uranium 1.66 x 10-~ 9}9u 6.2-Q x 10-11 g/gU 3.04 x *10-9 g/gU 3.04 x 10-9 g/gU 5.18.x 105 MeV-Bq/kgU OF Maximum content of U-238 is 9.23 x 10-19/gU for a maximum U-235 concentration of 5%. Since, for concentrations less than 5%, ttie U238 value will be higher, it is shown as "Balance of Uranium" in Table 2.

PAGES 9

NRC FORM 618 U.S. NUCLEAR REGULATORY COMMISSION (8-2000) 10 CFR71 CERTIFICATE OF COMPLIANCE FOR RADIOACTIVE MATERIAL PACKAGES

1.
a. CERTIFICATE NUMBER
b. REVISION NUMBER
c. DOCKET NUMBER
d. PACKAGE IDENTIFICATION NUMBER P.AGE 9372 1

71-9372 USA/93 72/B( U )F-96 4

OF 5.(b)(1) continued (i) 8 x 8 fuel assemblies comprised of 60 to 64 rods in a square array with a maximum active fuel rod length of 381 cm. The maximum pellet diameter, minimum clad thickness, rod pitch, water rod and poisori rod specifications are-in accordance with Table 3 below.

(ii) 9 x 9 fuel assemblies comprised of 72 to 81 rods in a square array with a maximum active fuel rod length of 381 cm. The maximum pellet diameter, minimum clad thickness, rod pitch, water rod and poison rod specifications are in accordance with Table 3 below.

(iii) 10 x 10 fuel assemblies comprised of 91to100 rods in a square array with a maximum active fuel rod length of 385 cm. The, maximum pellet diameter, minimum clad thickness, rod pitch, water rod and poison rod specifications ar1;3 in accordance wJth Table 3 below.

\\

(iv) 11 x 11 fuel assemblies c:;omprised of 112 rods in a square array with a maximum active fuel rod length of 385 cm. The maximum pellet diameter, minimyrxi clad thickness, rod pitch, water rod and.poison rod specifications are in accordance with Table 4 below.

(v) Uranium oxide fuel:rods configured loose, in a 5 inch diameter schedule 40 stainless steel pipe/prote,ctiV.e case or str'%pped together. When fuel r~qfare pl~c§"9 in polyethylene sleeves, ea¢h polyethylene sleeve shall not excE?e'd 0.0152 cm in thickness. The maximum pellet diameter, minimum clad thickress, ~r,id rod spedflcations are in accordance with Table 5 below.

.1 (vi) Uranium carbide or, generic PWRuranium bxidefuerfods qonfigured loose, in a 5 inch diameter ~cheddle 4d :stainless steel pipe.. When. fyel' ro~.~ *. ~.re placed in polyethylene sleeves, each polyethylE:me slel¢Ye shall not e~@e,ed o.ql52 6m in thickness. The maximum pellet diameter, minimum clad thickness, and rod specifi69tibns are lh accordance with Table 5 below.

PAGES 9

l~.

NRC FORM 618 U.S. NUCLEAR REGULATORY COMMISSION (8-2000) 10 CFR 71 CERTIFICATE OF COMPLIANCE FOR RADIOACTIVE MATERIAL PACKAGES

1.
a. CERTIFICATE NUMBER
b. REVISION NUMBER
c. DOCKET NUMBER
d. PACKAGE IDENTIFICATION NUMBER PAGE 9372 1

71-9372 USN9372/B(U)F-96 5

5.(b)(1) continued Parameter Fuel Assembly Type U02 Density Number of water rods*

Number of fuel rods Fuel Rod OD Fuel Pellet OD Cladding Type Cladding ID Cladding Thickness Active fuel length Nominal Fuel Rod Pitch -

U-235 Pellet Enrichment **

  • Maximum Lattice Average Enrichment Channel Thicknessh **

Partial Length Fuel Rods; (113 through 2/3 normaUength)

Gadolinia Requirements Lattice Average Enri~hmentc

S 5.0 wt% U-235
S 4. 7 wt% U-235
S 4.6 wt% U-235
S 4.3 wt% U-235
S 4.2 wt% U-235

_::: 4.1 wt% U-235

_::: 3.9 wt% U-235

_::: 3.8 wt% U-235

.:S 3.7 wt% U-235

S 3.6 wt% U-235

_::: 3.5 wt% U-235

.:S 3.3 wt% U-235

.:S 3.1 wt% U-235

_::: 3.0 wt% U-235 s 2.9 wt% U-235 Polyethylene Equivalent Massd (Maximum per Assembly)

Table 3: Fuel Assembly Parameters (8x8, 9x9, 10x10)

Units Type Rods 8x8

S98%

Theoretical 0,2x2 60- 64 cm 2: 1.176 cm,

Sl.Q5.,

Type 9x9

S98%

Theoretical 0, 2-2x2 off-center diagonal, 3x3 n-81 2: 1.093

.* :SO.Q,6 Type FANP lOxlO S98%

Theoretical 0, 2-2x2 off-center diagonal, 3x3 91 - 100 2: 1.000 s0.895 Type GNF 10xl0

S98%

Theoretical 0, 2-2x2 off-center diagonal, 3x3 91 - 100 2: 1.010 S0.895 Zirconium Alloy Zirconium Alloy Zirconium Alloy Zirconium Alloy cm s 1.10 s 1.02

0.933 s 0.934 cm 2
0.038 2: 0.036

'.* 2: 0.033 cm S381 cm 1.63

< 1 45

-~*,;;..., __ ; s 1:30_.

wt%

S;5.0

\\

wt%

S;5;0.

. 0.11 --:.o:.so48

  • cm 0.17-0.3048 I

14....

-#~..,','

,., ' \\' __ ;-

@,wt%

7@*2:wt%

1

.* 10'@2wtY. ' >i2@2wt%

('Jd203

. ~@ 2 wt%' ' '

8 @ 2 wt% ;'. / 12@ 2 wt%

kg

.6@'2 wt%

.8 @2wt%'

10 @:2'"Wt%

- *. * ***6.@?z:wt%

    • s.'@2wtfYo 9@2*.~t%

.6~_w;.i m~:*~>" 6 @2 wt%

8 iWi%

4@2wt%\\~::

  • 6@2 W't%

3"@2 wt%

4@'.2Wt%

6@2wt%

1)@2 wt%

4 @ 2 \\'vt%

4 @ 2 wt%. ', -6 @ 2 wt%

2 @ 2 wt%

4 @ 2 wt%\\;<.

6 @ 2 wt%

2 @ 2 wt%

4 @ 2Vwt% ',*

4 @ 2 wt%

~@.2wtY,,

  • 2*@Q...wt%

4@2wt%

2@fWi%

. 2@2wt%

2@2wt%

None 2 @ 2 wt%

2 @ 2 wt%

None None 11 None 2@2wt%

None None 11 10.2 2: 0.038 S385 1.30

S;5.0
S;5.0 0.17
__ 0.3048 14

.12@2wt%

12@2 wt%

10@2 wt%

9@2wt%

8@2wt%

8@2wt%

6@2wt%

6@2wt%

6@2wt%

4@2wt%

4@2wt%

2@2wt%

2@2wt%

2@2wt%

None 10.2

a.

For 8 x 8 fuel assembly designs, there can be either 0 or I water rod; the water rod location occupies a space equivalent to 2 x 2 fuel rods. This is designated as 0, 2 x 2 in the table, For 9 x 9 and 10 x 10 fuel assembly designs, there can be either 0, 1, or 2 water rods in the assembly; the water rod location occupies a space equivalent to (i) two 2 x 2 fuel rod*equivalent spaces on a diagonal at the center of the assembly, or (ii) one 3 x 3 fuel rod equivalent space (9 fuel rods space) in the center of the assembly.

These configurations are designated as 0, 2 - 2x2 off-center diagonal, 3x3 in the table.

b.

Transport with or without channels is acceptable

c.

Required gadolinia rods must be distributed symmetrically along the major diagonal.

d.

Polyethylene equivalent mass calculation per Section 6.3.2.2 of the application, PAGES OF 9

NRC FORM 618 U.S. NUCLEAR REGULATORY COMMISSION (8-2000) 10 CFR71 CERTIFICATE OF COMPLIANCE FOR RADIOACTIVE MATERIAL PACKAGES

1.
a. CERTIFICATE NUMBER
b. REVISION NUMBER
c. DOCKET NUMBER
d. PACKAGE IDENTIFICATION NUMBER 9372 1

71-9372 USA/93 72/B(U)F-96 5.(b )( 1) continued Table 4: Fuel Assembly Parameters ( 11 x11)

Parameter Units Fuel Assembly Type Rods U02 Density*

g/cm3 Number of water rods Number of fuel rods Fuel rod OD cm Fuel Pellet OD cm Cladding Type Cladding ID cm.:.:_1 Cladding Thickness cm Equivalent Nominal Ftiel Rod Pitch cm U-235 Pellet Enrich~ent wt%

Maximum L~lfic,e Average Enrichment wt%

Fuel Channei'Side-Thicknessh cm

..}

Full Length Fuel Rods Quantity Active Length cm Short Part Length Fuel Rods.

. Quantity Active Length cm Long Part Length Fuel Rods

  • Quantity Active Length:

cm Gadolinia RequirementsLattice Average Enrichment" S 5.0 wt% U~235

\\,;

S 4.8 wt% Uc235 I

s 4.6 wt% U-~i\\S.

S 4.4 wt% U-235

  1. @wt%

S 3.8 wt% U-235 Gd203 S 3.6 wt% U-235 S 3.5 wt% U-235 S 3.3 wt% U-235 S 3.2 wt% U-235

2.9 wt% U-235 Polyethylene Equivalent Mass kg

!(Maximum per Assembly)d

a. Density based on a pellet modeled as a right cylinder

. b. Transport with or without channels is acceptable.

Value l lxl 1 Sl0.763 3x3 center ll2 2:0.930 S0.820 Zirconium Alloy S0.840 2:0.045

'=;l.195

<S.O T

S5J)

,,,~0.~54 92 S385 12 Sl55.l

~

. :.. 8'

' :5?~~6.8 13 @2 "'.!.%.*

12@2 wt.%

11 @2~%

10@2 wt%

9@2wt%

.~@2wt%

7@2wt%

.)'

6@2wt%

5@2wt%

4@2wt%.

3@2wt%

2@2wt%

None 10.2 PAGE 6

OF

c. Required gadolinia rods must be distributed symmetrically along the major diagonal, and shall not be placed on the periphery.
d. Refer to Section 6.3.2.2 of the application.

PAGES 9

NRC FORM 618 U.S. NUCLEAR REGULATORY COMMISSION (B-2000) 10CFR71 CERTIFICATE OF COMPLIANCE FOR RADIOACTIVE MATERIAL PACKAGES

1.
a. CERTIFICATE NUMBER
b. REVISION NUMBER
c. DOCKET NUMBER
d. PACKAGE IDENTIFICATION NUMBER PAGE PAGES 9372 1

71-9372 USA/9372/B(U)F-96 7

OF 9

5.(b)(1) continued Table 5: Fuel Rod Paramet$rs Parameter Units Type Fuel Assembly

. 8x8 9x9 lOxlO llxll CANDU-CANDU-Generic 14 25 Type (U02)

(U62)

(U02)

(U02)

(UC)

(UC)

.PWR(U02)

U02orUC g/cm3

.:10.14 sl0.74
Sl0.74 Sl0.763
S13.36 Sl3.36 Sl0.74 Fuel Density*

Fuel rod OD cm 2:1.10 2:1.02 2:1.00' 2:0.930 2:1.340

.:o.996 2:1.118 Fuel Pellet OD cm Sl.05

~0.96.

so.9o

S01820 Sl.254 s0.950 so.98 Cladding Type Zirc. Alloy Zirc. Alloy Zirc. Alloy Zirc. Alloy Zirc. Alloy Zirc. Alloy Zirc. Alloy or'SS or SS or SS Cladding ID sI.02 cm Sl.10 Sl.00

.so.930

<l.267*

s0.951 Sl.004 Cladding cm

_:0.0.38 2:0.036 2:_0.038 20.045

~~*-

~0.033 2:0.033 2:0.033 Thickness

/

"o[;~* S47.752

- __, ~~

Active fuel Length cm

<$81 S381 S385 6385 S40.013 S450.

Maximum U-235 wt.%

S5.0 s5.o S5.0 Pellet Enrichment

. S5.0

<5.0

}

S5.0

.::;5.0

~1.:,__.

)

Maximum Average i

fuel rod wt.%

s5.0 S5.0 s5.0 s5.o S5.0 S5.0 S5.0 Enrichment Loose Rod

-'/.

,l Configuration Freely Loose or S25

25 S25

$5 NIA NIA NIA Strapped Together Packed in 5" SS l

Pipe or protective S22 S26

~o

)

S30 S74b Sl30° S105b Case, i.e., SS Box

.i with Lid

~.

l \\ *.

a. Density based on a pellet modpled as a right cylinder.
b. Including partial rods -using dense packing of congruent rods-in the 5" SS pipe

NRC FORM 618 U.S. NUCLEAR REGULATORY COMMISSION (8-2000) 10CFR 71 CERTIFICATE OF COMPLIANCE

1.

FOR RADIOACTIVE MATERIAL PACKAGES

a. CERTIFICATE NUMBER
b. REVISION NUMBER
c. DOCKET NUMBER
d. PACKAGE IDENTIFICATION NUMBER PAGE 9372 1

71-9372 USA/9372/B(U)F-96 8

OF 5.(b)(2)

Maximum quantity of material per package Total weight of payload contents (fuel assemblies; or fuel rods, and rod shipping containers) not to exceed 684 kg (1508 pounds).

(i) For the contents described in 5(b)(1)(i), 5(b)(1)(ii), 5(b)(1)(iii), and 5(b)(1)(iv): two fuel assemblies..

(ii) For the contents described in 5(b)(1)(v) and 5(b)(1){vi): allowable number offuel rods per compartment (2 compartments per package).

(c) Criticality Safety Index, except for contents described in 5(b)(1)(vi) and limited in 5(b)(2)(li) 1.0 Criticality Safety Index for cq.ntents described in 5(b)(1)(vi) and limited in'5(b)(2)(ii) 2.1

6. In addition to the requirements of Subpart G of 1 O CFR Part 71:

(a) The package shall be prepared for shipment and operat~d in aCf?ordance wlth Chapter 7 of th.e application.

(b) The packaging ml1st meet the Acceptance Tests and M,ainten?nce Program,of Chapter 8 of the application.

( c) Prior to ~ach shipment, the fuel rods shall conform 'to the leak te.sts.and specjfic inspection techniques used for qualificatibn ahd ih".process inspections as d~flhed in Chapter 8. Stainless steel components of the packaging must be visually ihspected. Packages in which stainless steel components show Ritting corrq'$ion; cracking, or pinholes, are hot authorized for transport.

.~."

.t.\\,

( d) If ~rapping is used on the unirradiated fuel ai~yem'~lies, their ends mu~t be assured to be open dunng transport.

7. All fuel to be shipped must meet the maximum P(r/t) criterion-product of the pre-pressure and of the maximum *Inside Radius/Thickness-of 10.18653 MPa.. Shipment of 11 x11 fuel designs manufactured by other suppliers than Framatome is not authorized. ATRIUM 11x11 fuel shall contain only commercial grade uranium, i.e., cannot be made from down-blended low enrichment fuel or reprocessed uranium.
8. Cluster separators are optional and may be comprised of polyethylene or other plastics. Polyethylene or plastic mass limits shall be determined in accordance with Section 6.3.2.2 (Material Specifications) of the application.
9. The package authorized by this certificate is hereby approved for use under the general license provisions of 10 CFR 71.17.
10. Transport by air of fissile material is not authorized.

PAGES 9

NRC FORM 618 U.S. N.UCLEAR REGULATORY COMMISSION (8-2000)

I 10 CFR71 CERTIFICATE OF COMPLIANCE FOR RADIOACTIVE MATERIAL PACKAGES

1.
a. CERTIFICATE NUMBER
b. REVISION NUMBER
c. DOCKET NUMBER
d. PACKAGE IDENTIFICATION NUMBER PAGE 9372 1

71-9372 U SA/93 72/B(U) F-96 9

11. Revision No. O of this certificate may be used until April 30, 2019.
12. Expiration date: April 30, 2019.

REFERENCES Framatome TN-B1 Safety Analysis Report, FS1-0014159, Revision 8, dated March 27, 2018.

F THE U.S. r;9LEAR REGULATORY COMMISSION

/11-}

Date: June<.J, 2018 McKirgan, Chief nt Fuel Licensing ranch

Division of Spent Fuel Management Office of Nuclear Material $afe.fy *

  • and Safeguards

.J

/< /

PAGES OF 9

1 TBD and supplemental information submitted on January 23, 2019